CANADIAN APPLICATION GUIDE

Page 1 BMW & MINI PERFORMANCE PROUCTS CANAIAN APPLICATION GUIE UPATE 5/16/05 inan Price and Application Guide, January 2001

INTROUCTION About the Price and Application Guide, Sales Policies...4 Emissions Status Identification... 5 Emissions Advisory for California ealers...5 inan eck Lid Badge Order Form...8 inan Signature Vehicle Registration Form...9 Warranty FAQ...10 Product Overview...11 Page 2 8 SERIES PERFORMANCE LEGACY SERIES 850i, Ci, CSi (E31) 1991-95...15 840Ci (E31) 1994-98... 16 7 SERIES 750i/iL (E38) 1996-2001...17 740i, il (E38) 1996-2001...18 740i, il (E38) 1995...21 PERFORMANCE LEGACY SERIES 750iL (E32) 1988-94... 22 740i, il (E32) 1993-94... 24 735i, il (E32) 1988-92... 25 735i, L7 (E23) 1985-87... 27 733i (E23) 1983-84...28 6 SERIES 645 (E63) 2004-2005...127 PERFORMANCE LEGACY SERIES M6 (US, E24) 1987-88... 29 M6 (EURO, E24) 1984-88...30 635CSi, L6 (E24) 1988-89...31 635CSi (E24) 1985-87... 32 633CSi (E24) 1983-84... 33 X5/X3 5 SERIES X5 4.6i (E53) 2002-2003...34 X5 4.4i (E53) 2000-2005...35 X5 3.0i (E53) 2001-2005...36 X3 3.0i (E83) 2004-2005...124 X3 2.5i (E83) 2004-2005...125 530 (E60) 2004-2005...126 545 (E60) 2004-2005...127 M5 (E39) 2000-2003...37 540i SEAN and SPORT WAGON (E39) 1996-2003... 39 530i SEAN (E39) 2001-2003... 42 525i SEAN and SPORT WAGON (E39) 2001-2003... 44 528i SEAN and SPORT WAGON (E39) 1996-2000... 46 PERFORMANCE LEGACY SERIES 545 (E60) 2004-2005...127 540i (E34) 1993-95...48 530i (E34) 1993-95...50 535i (E34) 1989-93...52 M5 (E34) 1991-93...54 525i (E34) 1991-95...56 525i (E34) 1989-90...58 M5 (US, E28) 1987-88... 59 M5 (EURO, E28) 1984-86...60

5 SERIES CONT. 3 SERIES PERFORMANCE LEGACY SERIES CONT. 535i (E28) 1985-88...61 533i (E28) 1983-84...62 528e (E28) 1982-88...63 M3 (E46) 2001-2005...64 330i, Ci, Conv. ZHP (E46) w/factory Performance Package 04-05...66 330i, Ci, xi, Convertible (E46) 2001-2005...68 328i, Ci, (E46) 1999-2000...71 325i, Ci, xi, Sport Wagon, Convertible (E46) 2001-2005...73 323i, Ci, Convertible, Sport Wagon (E46) 1999-2000...76 M3 (E36) 1996-99...78 M3 (E36) 1995...81 328i, Convertible (E36) 1996-99...83 325i, Convertible (E36) 1992-95...85 323i, Convertible (E36) 1998-99...87 318i (E36) 1996-98...89 318i (E36) 1992-95...91 318ti (E36/5) 1996-99...93 318ti (E36/5) 1995...94 Page 3 PERFORMANCE LEGACY SERIES M3 (E30) 1987-91... 118 325i, 325ix, Convertible (E30) 1987-93... 119 325e (E30) 1984-88... 120 318i, Convertible (E30) 1990-93... 121 318i (E30) 1983-85... 122 323 (E30) 1983-91...123 Z8 ROASTER Z4 ROASTER Z8 (E52) 2000-2003...95 Z4 3.0 (E85) 2003-2005...97 Z4 2.5 (E85) 2003-2005...99 Z3 ROASTER and COUPE MOELS M COUPE (E36/7) 2001-2002...101 M COUPE (E36/7) 1999-2000...102 3.0 Z3 COUPE (E36/7) 2001-2002...104 2.8 Z3 COUPE (E36/7) 1999-2000...106 M ROASTER (E36/7) 2001-2002...107 M ROASTER (E36/7) 1998-2000...108 3.0 Z3 ROASTER (E36/7) 2001-2002... 110 2.8 Z3 ROASTER (E36/7) 1996-2000... 111 2.5 Z3 ROASTER (E36/7) 2001-2002... 113 Z3-2.3 ROASTER (E36/7) 1999-2000... 115 Z3-1.9 ROASTER (E36/7) 1996-99... 116 MINI COOPER MINI Cooper S (R53) 2002-2005...117 PERFORMANCE CHIP APPLICATION GUIE Performance Engine Software Application Guide... 128 Performance Transmission Software Application Guide... 130 Obtaining the Software Version Code Numbers from the ECU... 132 WARRANTY STATEMENT inan Performance Products Limited Warranty... 133

Price and Application Guide Page 4 This document provides a complete listing of all currently available inan Performance Products for each BMW and MINI model. You will find a section for each model which includes: the available performance products, specific production date ranges, inan s part numbers, the suggested retail price, recommended installation units, current emissions status, and any related notes concerning the products. This document also contains a Performance Engine and Transmission Software (Chip) Application Guide, which begins on page 128. This listing of inan Performance Chips provides the specific information required in order to determine the appropriate software for a given model. Installation Labor Labor units are provided as a reference for determining your retail installation price for each inan Performance Product. Each labor unit represents 1/10 of an hour. inan recommends, however, that the installation is sold based upon the number of labor units published, not the time required to install the product. The actual installation time may vary depending upon the technician s experience and other factors. When determining the installation units required for Suspension Systems and Components, please be aware of the following: Labor units indicated for suspension systems include alignment. Labor units indicated for individual suspension components are for the product indicated only, assuming that the item is being installed separately. Labor units indicated for individual suspension components do not include an alignment, although it may be advised after installing some products. Labor units indicated for shocks, struts and bushings are for each item, even though the products may typically be installed in pairs. Core Exchange Program Some inan products are sold on an exchange basis and a refundable core deposit is charged on the invoice which reflects the core value of the item. The amount of the refundable core deposit for applicable products is listed as a footnote after the retail price of each item. An item returned under the core exchange program is eligible for a full refund of the core deposit when it meets the following criteria: The word core is prominently displayed on the carton. The core is accompanied by a copy of the original inan invoice. The core is returned within 30 days of receipt of the original shipment by the dealer. The core is fully functional for the specific make, model, and year car as the item supplied by inan. The core is in good condition (can be reused) and has not been modified. Cores returned to inan that do not meet the above criteria, or are damaged in any way, will be returned to the dealer and the core deposit considered forfeited. Limited Warranty inan s Limited Warranty statement begins on page 133. We recommend that you familiarize yourself with the specifics of inan s product warranties and ask you to contact your inan representative with any questions that you may have about our warranty coverage. We consider our comprehensive warranty program to be an important component of each inan product. Modification of the Product Line inan reserves the right to modify, improve, alter or discontinue products and to develop new products that, in its discretion, are necessary or advisable. Prices and Specifications are subject to change without notice.

Price and Application Guide Page 5 Software Copyrights All inan software (inan Performance Engine and Transmission Chips and ownloads ) is copyright protected. Any unauthorized duplication of inan Performance Chips and/or Software is strictly forbidden and any violation will be vigorously prosecuted. Product Returns All product returns must be pre-authorized by inan s Customer Service epartment in order to identify the specific reasons for the return and to expedite processing. A Return Receipt number will be issued to identify the specifics of a particular return, which must be prominently displayed on the shipping carton. Unauthorized returns or products returned for reasons other than warranty adjustment are subject to a 20% restocking charge. iscontinued items will not be accepted for a credit/refund and will be returned to the shipper. Emissions Statusons Status Identificat Each inan Engine Tuning product is designated with a <1>, <2>,<3> or <0> in the Notes column after its listing, denoting the current Street Legal Status of the item and any potential restrictions on the sale or installation of the product on pollution controlled motor vehicles. Following are the definitions for each of the Street Legal Status symbols: <1> 50 State Emission Legal. This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. <2> 49 State Emissions Legal. This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles which may never be used upon a highway. <3> Racing Only. This product is not legal for sale or use in California on any pollution controlled motor vehicles. Legal only for racing vehicles which may never be used upon a highway. <0> Status Pending. Street Legal Status pending. Currently: This product is not legal for sale or use in California on any pollution controlled motor vehicles. Legal only for racing vehicles which may never be used upon a highway. We encourage you to contact a inan Performance Representative with any questions that you may have about the current Street Legal Status of any inan Engine Tuning Product. s Advisory for California ealers The environmental impact of vehicle emissions is important to us from both a social conscience and legal perspective. We actively support emissions legislation that protects the environment. Most inan products have already been tested and are 50 state emissions legal. Testing of inan products for emissions legal status is an ongoing process. The current emissions status of each product is indicated in this Price and Application Guide, as well as all literature covering our products. There are certain restrictions in the state of California with regard to the installation of products that may potentially effect emissions on new vehicles, even when the product has been granted an exemption by the California Air Resources Board. This section provides California dealers with pertinent information regarding emissions laws, particularly for new cars, in an effort to avoid potentially illegal modifications to vehicles. California Vehicle Code Section 27156 and 38391 prohibit the disconnection, modification or alteration of any required pollution control device. These are the Anti-Tampering laws and they provide stiff penalties for violations such as removal of catalytic converters or EGR systems. None of the products that inan produces for street use cause the disconnection or rendering inoperative of any pollution control device or element of design, nor does inan recommend or condone the disconnection or rendering inoperative of any pollution control device or element of design. The Anti-Tampering laws prohibit the sale or use of aftermarket automotive products which may affect the emissions performance of the vehicles they apply to, unless the product has been

Emissions Status (cont.) Page 6 granted an Exemption from the prohibitions of Sections 27156 and issued an Executive Order by the California Air Resources Board. The Exemption process and the Executive Orders provide a means by which manufacturers and consumers can comply with California regulations. inan has been providing high performance products for BMWs which are in compliance with California and federal regulations for over a decade, and will continue to expand our product line in the future. Testing of inan products is an ongoing process and new Street Legal products will be included in subsequent catalogs and press releases. The following is a current list of inan products that have been granted an Exemption by the California Air Resources Board or are replacement parts and are legal for sale and installation in California. inan Product CARB Exemption Year/Model Performance Software: E.O. No. -176-13 1987-2000 E.O. No. -176-20 1999-2002 Supercharger Kits: E.O. No. -176-10 1995 M3 1993-95 325i 1993-95 525i E.O. No. -176-9 1994-95 540i 1994-95 530i 1993-95 740i 1993-95 840Ci E.O No. -176-23 1996-2001 740i 1996-2003 540i 2000-2002 X5 4.6 2000-2002 X5 4.4 Supercharger Kits (Vortech): E.O. No. -176-15 1995-99 M3 (E36) 1998-00 M Roadster/Coupe 1998-00 inan ISR 3 Supercharger Kits (Powerdyne): E.O. No. -176-12 1996-99 328i (E36) 1996-8/98 Z3 2.8 1996-99 M3 (E36) High Flow Cold Air Intakes: E.O. No. -176-14 1995-99 M3 1996-99 328 (E36) 1998-99 323 (E36) 1999-2000 328 (E46) 1999-2000 323 (E46) 1996-98 318 (E36) 1996-99 Z3 1.9 1999-2000 Z3 2.3 1996-2000 Z3 2.8 1996-1998 540 1996-1998 740 1993-95 325 E.O. No. -176-21 2001-02 325i, Ci, xi 2001-02 330i, Ci, xi 2001-02 Z3 2.5, 3.0 1996-00 528i 1999-02 540i 2001-02 525i 2001-02 530i 2000-02 M5 1999-01 740i, il 2000-02 X5 4.4i 2002 X5 4.6is 2001-02 X5 3.0 High Flow Intake Manifolds: Replacement Part All BMW Applications except: -176-17 1999-01 740 i/il 1999-02 540i 2000-02 X5 4.4 Free Flow Exhaust Systems: Replacement Part All BMW Applications High Flow Exhaust Manifolds: Replacement Part All BMW Applications High Flow Induction Tubes: Replacement Part 1994-95 540i 1994-95 530i 1993-94 740i High Flow Air Boxes: Replacement Part 1992-95 325i 1996-98 328i 1995-98 M3 Stroker Engines: E.O. No. -176-6 1984-88 M5, M6 1991-93 M5 Turbocharger Kits: E.O. No. -176 1985-88 535i 1985-87 635i 1985-87 735i E.O. No. -176-4 1989-92 535i 1988-89 635i 1988-92 735i,iL Twin Turbocharger Kits: E.O. No. -176-3 1988-92 750iL 1991-92 850i

Page 7 High Flow Air Flow Meters: E.O. No. -176-18 1995-99 M3 1998-00 M Roadster, M Coupe 1996-02 540i 2000-02 M5 1996-01 740i, il 2000-02 X5 4.4 2002 X5 4.6 2000-02 Z8 High Flow Throttle Bodies: E.O. No. -176-17 1992-95 325i, is, ic 1996-99 328i, is, ic 1995-99 M3 1998-00 Z3- M Roadster 1998-00 Z3- M Coupe 1991-95 525i, it 1992-99 318i, is, ic 1996-99 Z3 1.9 and 2.8 98-99 323is (E36) 96-98 528i E.O. No. -176-22 2000-02 X5 4.4 2001-02 X5 3.0 2002 X5 4.6 2001-02 325, 330 Ci, xi 2001-02 Z3 2.5, 3.0 1999-02 540i 2001-02 525i 2001-02 530i 1999-01 740i, il 2000-02 Z8 2000-02 M5 The previously listed products are legal for use on the vehicles listed and may be installed by any consumer, repair facility or new car dealership provided that the vehicle being modified has been sold to its ultimate purchaser. ue to California regulations, no emissions-related modifications of any kind, exempt or not, may be performed on any new vehicle in California prior to its sale to the ultimate purchaser. Only vehicles which are as originally equipped by the manufacturer, with regard to emissions, may be offered for sale as a new vehicle in California in any advertisement or on any new car lot. Used vehicles may be modified and subsequently offered for sale in advertisements and on car lots. Once a new vehicle has been selected by an ultimate purchaser, financial arrangements may be made for the purchase of the vehicle as well as any modifications which the ultimate purchaser may want performed on his/her vehicle. Once ownership of the vehicle has been transferred to the ultimate purchaser it is no longer being offered for sale to the public and it may have any legal modifications done to it. Vehicles in this category are not on display and do not have manufacturers window stickers or any other type of price tag on them. These vehicles are sold. Following is a list of inan Performance Products that have been submitted to the California Air Resources Board for an Exemption. These products are not currently legal for sale or use in California on any pollution controlled motor vehicle, although an Exemption is anticipated in the next few months. High Pressure Fuel Regulator: 1995 M3 The following inan Performance Products are not Emissions-Related Modifications and may be legally installed on any new or used vehicle: Performance Suspension Systems Strut and Shock Tower Braces Wheels and Tires riveline Components Brake Conversions Performance Front End Bushings Wheel Spacer Kits Free Flow Exhaust Systems Carbon Fiber Engine Covers

The inan eck Lid Badge Page 8 A inan eck Lid Badge will be provided at no charge when inan performance product purchases total at least 10 points for a single vehicle. A list of point values for the various inan products follows. Please photocopy this page, complete the requested information and forward to inan in order to obtain the badge for your particular application. ate: Customer Information: Name: Phone: Address: VEHICLE INFORMATION: Model: Year: VIN: INAN EALER INFORMATION: ealer Name: ealer Representative: INAN PERFORMANCE PROUCTS: Please check-off the inan products that have been purchased below. Attach copies of the customer s invoices for verification of the purchase(s). Performance Engine Software/Chips 2 points Performance Transmission Software/Chips 1 point High Flow Cold Air Intake Systems 2 points High Flow Throttle Bodies 2 points High Flow Air Mass Meters 2 points Free Flow Exhausts 3 points High Flow Intake Manifolds 3 points High Flow Exhaust Manifolds/Headers 3 points Performance Cam Sprockets 3 points Performance Cams 3 points Supercharger Systems 10 points Suspension Systems (Stage 1, 2, 3 or 4) 5 points Strut Tower Braces 2 points Shock Tower Braces 1 point inan Wheel Sets 5 points Brake Conversions 3 points ifferentials 2 points Lightweight Clutch Assemblies/Flywheels 2 points Performance Pressure Plates 2 points Carbon Fiber Engine Covers 1 point (each) Floor Mats 1 point MINI Boost Upgrade Kit 4 points Total Points

Signature Vehicle Order Form Page 9 In order to register a inan S, S1, S2, or S3 signature vehicle and receive the under hood plaque, please complete this form. S S1 S2 S3 (Check one) inan Serial Number: CUSTOMER INFORMATION: Name: Phone: Address City State Zip EALER INFORMATION: Name: Address City State Zip Phone AUTOMOBILE INFORMATION: VIN Model Color Code ate of Manufacture Mileage ate of Install INCLUE WITH REGISTRATION FORM: Copy of invoice(s) for inan Products. I certify that the vehicle described above has been exclusively equipped with inan products. I have also included all of the information required to be registered as a inan Signature Vehicle and to receive a inan Vehicle Identification under hood plaque. I understand the allocation of a inan Vehicle Identification plaque and inclusion in the Signature Vehicle Registry is subject to inan s approval. OWNERS SIGNATURE EALERS SIGNATURE ATE ATE inan will complete this information: inan Serial # Registration ate:

inan s Limited Product Warranty The following are answers to commonly asked questions about inan s warranty. Page 10 Will inan Performance Products affect the new car warranty coverage? No, because inan s warranty matches the remaining term of the original vehicle manufacturer s new car warranty as well as covering any affected factory components. How long are inan products covered? For the remaining term of the Original Vehicle Manufacturer s New Car Warranty, up to 4 years / 50,000 miles or 2 years / unlimited mileage, whichever offers the longest coverage. inan Performance Engine and Transmission software are guaranteed for life. What is covered? inan products and the related labor charges to repair or replace them. Any factory components and/or related labor charges that are directly affected by a inan product. Who can perform warranty work? Any Authorized inan BMW Performance Center may perform necessary warranty work. If a inan Authorized ealer is not available in a certain area, arrangements will be made for an available facility to perform any necessary work Is the warranty transferrable? Yes. Subsequent owners of a vehicle will be covered by inan s warranty for the remaining period of the original vehicle manufacturer s new car warranty, up to 4 years / 50,000 miles or for 2 years / unlimited mileage, which ever offers the longest coverage.

Engine Tuning Products Page 11 PERFORMANCE ENGINE SOFTWARE Engine management software is the first step to increasing power in today s advanced engines. inan software takes full advantage of premium pump fuel (91+ octane) by reprogramming the fuel mixture and ignition timing for maximum performance and driveability. The software also raises the stock rev-limit, producing a broader power band and greater road speed in each gear. The top speed governor is removed as well, allowing the car to attain the maximum speed possible given the available power and gearing. inan Performance Engine Software is guaranteed for life. COL AIR INTAKE SYSTEMS Power is increased by allowing your engine to breathe bigger gulps of cool, dense air, while creating the lusty sound of performance. Manufactured from beautifully crafted carbon fiber or aluminum, the systems have been designed for maximum intake efficiency. Fully matched Stage 2 Performance Engine Software optimizes the fuel mixture and ignition timing for maximum power gains and insures OBII compatibility. HIGH FLOW THROTTLE BOIES inan modified Throttle Bodies produce faster acceleration and throttle response, especially at lower speeds. The internal diameter of the stock throttle body is increased to further improve the engine s ability to breathe, producing more power. Typically, Stage 3 Engine Software provides the optimal fuel mixture and ignition timing for maximum power gains and improved driveability FREE FLOW EXHAUST inan performance mufflers create additional power by reducing back pressure. They are made entirely from stainless steel for maximum resistance to corrosion and reduced weight. The systems provide a sporty, yet civilized exhaust note and feature polished tips for a subtle performance look. HIGH FLOW AIR MASS METERS The larger diameter High Flow Air Flow Meter further improves intake air flow for increased power and faster acceleration. The package includes the larger Air Flow Meter and all of the parts necessary for a clean and reliable installation. Typically, Stage 4 Engine Software insures maximum power gains and OBII compatibility.

Supercharger Systems Page 12 A inan Supercharger adds a whole new dimension to the BMW driving experience. The systems deliver unparalleled performance for the BMW owner who wants it all; outstanding horsepower and torque gains with civility for everyday driving. But how can you get both? The answer lies in inan s ability to create factory-like engine management systems; a critical factor in inan s product design philosophy. inan Superchargers produce ferocious power, yet behave in a civilized manner. The quality, fit and finish of the components are nothing short of factory levels, insuring the reliability enthusiasts expect of a supercharged BMW. With over 20 years of experience in BMW forced induction technology, you can enter the performance zone without leaving the lap of luxury. inan Superchargers are backed by a 2 year, unlimited mileage warranty. As you would expect, a supercharger installation will affect some aspects of the factory warranty covering the drive train components. inan s Supplemental Powertrain Warranty covers the factory drivetrain components for the remaining term of the manufacturer s new car warranty, up to 4 years or 50,000 miles. With inan s supercharger warranty you are covered year to year, mile to mile and bumper to bumper.

Chassis Tuning Products Page 13 CHASSIS TUNING PROUCTS inan offers a comprehensive line of performance suspension systems and components, designed to elevate the cornering capabilities of each BMW model. Nothing compares to the precision handling and responsiveness of a BMW equipped with a inan Performance Suspension System. All of the guesswork has been eliminated as inan provides complete suspension packages consisting of fully matched components for unparalleled handling and a well dampened ride. inan Suspension Systems are available in three to four different stages, depending upon the model. INAN PERFORMANCE WHEELS STRUT AN SHOCK TOWER BRACES Front and Rear Shock Tower Braces provide crisper handling by reducing the flex that occurs at the shock towers. And they look great. Made from strong, lightweight 6061-T6 brushed aluminum. STAGE 1 SUSPENSION Stage 1 lays the foundation for performance handling. The systems typically consist of a set of performance springs along with fully matched struts and shock absorbers. Many inan systems offer a choice of Bilstein or Koni externally adjustable struts and shocks, providing the driver with personal control of ride quality and handling characteristics. The Stage 1 Suspension Systems offer greater control over the pitch and roll associated with the stock suspension, while providing a nicely dampened ride. STAGE 2 SUSPENSION Stage 2 Systems add larger and adjustable anti-roll bars to the Stage 1 components for greater control of body roll. By keeping the body of the car flatter in the turns, the larger bars insure the best possible traction for fast and predictable cornering. The bars are also adjustable, allowing the driver to fine tune for the most neutral handling possible. STAGE 3 SUSPENSION Stage 3 Systems add front Camber Plates to the Stage 2 components for a very noticeable improvement in turn-in. The Camber Plates produce more negative camber on the front wheels for improved traction in the turns, dramatically reducing understeer or the car s tendency to push straight ahead when you want the car STAGE to turn-in. 4 SUSPENSION Aggressive drivers will also realize more even front tire wear as the additional negative camber will reduce the outside edge wear. STAGE 4 SUSPENSION Stage 4 Suspensions add a Camber Adjustable Rear Subframe Kit to the Stage 3 components for maximum grip at the rear of the cars. By providing camber control at the rear of the cars, the driver can adjust for maximum tire wear, traction and varying driving conditions, such as track events. Not available for all models.

riveline Tuning Products Page 14 Performance Automatic Transmission Software Sporty acceleration is no longer the sole domain of those who like to shift gears. inan s Automatic Transmission Software raises the shift points in both the Sport and Economy modes for quicker acceleration and greater road speed in each gear. In addition, the software provides firmer and quicker shifts for most late model applications (1996-2000 models), further improving acceleration. Limited Slip ifferentials As the cornering ability of a vehicle is increased, traction during on throttle cornering is compromised if the vehicle is not equipped with a limited slip differential. This is why M-Cars come equipped with limited slip from the factory. Limited slip improves the distribution of power between the two rear drive wheels, allowing for higher cornering speeds and the traction needed to propel the vehicle out of turns with authority. inan offers a broad range of limited slip differentials for BMW models. Modified Final rive Gearing Acceleration can be further improved by lowering the final drive gear ratio of the differential, effectively increasing the amount of torque delivered to the ground. The inan specified ratios will allow the cars to attain a speed of at least 60 mph, without forcing a second to third gear shift. Lightweight Flywheels and Clutch Assemblies Lighter weight flywheels and clutch components provide improved throttle response, faster engine revs and acceleration. Stage 2 Clutches also feature increased clamp loads for improved lock-up, better harnessing the extra power of supercharged engines. Carbon Fiber Engine Covers Beautifully crafted carbon fiber Ignition Module, Fuel Rail and Radiator/Alternator uct Covers give the engine compartment that performance look. Covers are currently available for 6 cylinder E39 5 series, E53 X5, E36 and E46 3 series models, as well as Z3 applications.

850i, Ci, CSi (E31) 1991-97 PERFORMANCE LEGACY SERIES Page 15 Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 850i, Ci 91-94 Engine Chip Set 900-5033 C $499 12.5 units <1> 850i, Ci 91-94 Transmission Chip See Pg. 130 C $199 8 units 850 CSi 94-95 Engine Chip Set 900-5633 C $499 12.5 units <1> 850 CSi 1/95-> Engine Chip Set See Pg. 128eee C $499 12.5 units <1> ENGINE PERFORMANCE UPGRAES 850i, Ci 91-94 Free Flow Exhaust 660-8400 C $2199 30 units <1> 850Ci 95-97 Free Flow Exhaust 660-8400 C $2199 30 units <1> 850Csi 94-95 Free Flow Exhaust 660-8600 C $2999 30 units <1>.

840Ci (E31) 1994-98 PERFORMANCE LEGACY SERIES Page 16 Year escription Part No. Code Price Labor Notes PERFORMANCE ENGINE SOFTWARE 96-9/98 Engine Software ownload 900-448 C $499 5 units <1> 9/96-98 Auto. Transmission ownload 902-44A5 C $349 5 units 96-8/96 Auto. Transmission Chip See Pg. 130 C $349 8 units (1) 94-95 Engine Chip See Pg. 128 C $399 8 units <1> 94-95 Transmission Chip See Pg. 130 C $199 8 units ENGINE PERFORMANCE UPGRAES 94-98 Free Flow Exhaust 660-8400 C $2199 30 units <1> (1) Stock transmission chip part number required for ordering.

750i/iL (E38) 1996-2001 Page 17 Year escription Part No. Code Price Labor Notes ENGINE PERFORMANCE UPGRAES 96-01 Free Flow Exhaust System 660-7520 F $1699 20 units <1> 96-01 Spring Set 100-0466 $472 90 units (2) ACCESSORIES 96-01 Signature Floor Mats Floor Mats G $150 (3) (2) inan spring set has been designed to work with factory updated spring pads for vehicles produced prior to 7/96. A label on the driver s side B pillar with the number 201 punched out indicates the update has been done. (3) Specify carpet color.

740i, il (E38) 1996-2001 Page 18 Year escription Part No. Code Price Labor Notes SIGNATURE VEHICLES 96-12/96 inan S 740 SE38-40VES $3496 73 units 1/97-8/98 inan S 740 SE38-40ES $3496 70 units 9/98-01 inan S 740 SE38-40LS $3496 70 units 96-12/96 inan S1 740 SE38-40VES1ML $4596 158 units (15) 96-12/96 inan S1 740 SE38-40VES1EL $5056 158 units (16) 1/97-8/98 inan S1 740 SE38-40ES1ML $4596 155 units (15) 1/97-8/98 inan S1 740 SE38-40ES1EL $5056 155 units (16) 9/98-01 inan S1 740 SE38-40LS1ML $5295 163 units (15) 9/98-01 inan S1 740 SE38-40LS1EL $5755 163 units (16) 96-12/96 inan S2 740 SE38-40VES2ML $7240 203 units (15) 96-12/96 inan S2 740 SE38-40VES2EL $7700 203 units (16) 1/97-8/98 inan S2 740 SE38-40ES2ML $7240 200 units (15) 1/97-8/98 inan S2 740 SE38-40ES2EL $7700 200 units (16) 9/98-01 inan S2 740 SE38-40LS2ML $9888 249 units (15) 9/98-01 inan S2 740 SE38-40LS2EL $10,348 249 units (16) 1/97-8/98 inan S3 740 SE38-40ES3ML-B $18,212 465 units (15) 1/97-8/98 inan S3 740 SE38-40ES3EL-B $18,672 465 units (16) 9/98-01 inan S3 740 SE38-40S3ML-B $24,811 494 units (15) 9/98-01 inan S3 740 SE38-40S3EL-B $25,271 494 units (16) PERFORMANCE SOFTWARE 1/96-8/98 Engine Software ownload 900-447 C $499 5 units <1> 1/96-8/98 Stg 2 Engine Sftwre ownload 903-4472 C $599 5 units <1>, (1) 9/98-01 Engine Software ownload 900-447TU C $499 5 units <1> 9/98-8/99 Stg 2 Engine Sftwre ownload 903-447TU2 C $599 5 units <1>, (1) 9/99-01 Stg 2 Engine Sftwre ownload 903-447TU2 C $599 5 units <1>, (1) 9/98-8/99 Stg 3 Engine Software 903-447TU3 C $699 5 units <1>, (3) 9/99-01 Stg 3 Engine Software 903-447TU3 C $699 5 units <1>, (3) 1/96-8/98 Stg 4 Engine Sftwre ownload 903-4474 C $799 5 units <1> 9/98-01 Stg 4 Engine Sftwre ownload 903-447TU4 C $799 5 units <1>, (11) 9/98-01 Stg 5 Engine Sftwre ownload 903-447TU5 C $999 5 units <1> 1/97-01 Auto. Transmission ownload 902-44A5 C $349 5 units 1/97-01 Stage 4/5 Trans.Software 902-44A5-4 C $349 5 units 96-12/96 Auto. Transmission Chip See Pg. 130 $349 8 units ENGINE PERFORMANCE UPGRAES 96-01 Free Flow Exhaust 660-7420 F $1799 30 units <1> (coupler attachment) ->12/96 Cold Air Intake-Aluminum 760-0650 $599 30 units <1>, (1) 1/97-9/98 Cold Air Intake-Aluminum 760-0655 $599 30 units <1>, (1) 9/98-01 Cold Air Intake-Aluminum 760-0660 $599 30 units <1>, (1) 740i/iL products and footnotes continued on next page...

740i, il (E38) 1996-2001 (Continued) Page 19 Year escription Part No. Code Price Labor Notes ENGINE PERFORMANCE UPGRAES (CONTINUE) 96-01 Replacement Air Filter for 403-0410 G $50 High Flow Cold Air Intake Systems 96-01 Air Filter Sock 401-0113 G $20 9/98-01 High Flow Throttle Body 760-3440 C $599 8 units <1>, (3) 96-8/98 Air Flow Meter Housing 763-1440B $449 5 units <1>, (10),(2) 9/98-01 Air Flow Meter Housing 763-1442B $849 7 units <1>, (11),(2) 9/98-01 High Flow Intake Manifold 760-5400 G $1449 39 units <1>, (12),(2) SUPERCHARGER SYSTEMS 1/97-8/98 Supercharger System 860-6811 F $9999 240 units <1>, (13) (19) 9/98-8/01 Supercharger System 860-6911E F $15,999 276 units <1>, (14) (19) SUSPENSION SYSTEMS 96-01 Stage 1 (w/o EC or HLL) 190-7045B $1560 85 units (5) 96-01 Stage 1-with HLL 190-7051B $1100 85 units (5) 96-01 Spring Set (w/o EC or HLL) 100-0459 $506 70 units (5) 96-01 Spring Set (w/ EC and/or HLL) 100-0477 $506 70 units (5) 96-01 Bilstein Rear Shock (ea.) 140-0355 $230 17.5 units 96-01 Bilstein Front Strut (Left) 140-0381 $297 15 units 96-01 Bilstein Front Strut (Right) 140-0382 $297 15 units BRAKES 96-01 Stage 1 Front Brake Conversion 290-3800 G $1757 40 units (9) 96-01 Stage 2 Front & Rear Brake 290-3801 G $3169 70 units (9) Conversion 96-01 Replacement Front Pads (pair) 251-0400 G $132 96-01 Replacement Rear Pads (pair) 251-0401 G $94 740i/iL products and footnotes continued on next page...

740i, il (E38) 1996-2001 (Continued) Page 20 Year escription Part No. Code Price Labor Notes RIVELINE MOIFICATIONS All 96-01 3.15 ifferential 773-0744 G $1995 40 units (7) -Non-Sport Models 740i 1/97-6/00 3.45 Limited Slip ifferential 770-0741A G $6999 53 units (17) -Non-Sport Models 740i 7/00-01 3.45 Limited Slip ifferential 770-0741B G $7799 79 units (18) -Non-Sport Models 740i 1/97-6/00 3.45 Limited Slip ifferential 770-0741B G $7799 79 units (18) -Sport Models 740i 7/00-01 3.45 Limited Slip ifferential 770-0741B G $7799 79 units (18) -Sport Models 740iL 1/97-6/00 3.45 Limited Slip ifferential 770-0742A G $6999 53 units (17) -Non-Sport Models 740iL 7/00-01 3.45 Limited Slip ifferential 770-0742B G $7799 79 units (18) -Non-Sport Models 740iL 1/97-6/00 3.45 Limited Slip ifferential 770-0742B G $7799 79 units (18) -Sport Models 740iL 7/00-01 3.45 Limited Slip ifferential 770-0742B G $7799 79 units (18) -Sport Models ACCESSORIES All 96-01 Signature Floor Mats (f/r) Floor Mats G $150 (8) (1) Stage 2 Engine Software required with Cold Air Intake System. (2) Stage 4/5 Transmission Software MUST be installed with this product for automatic equipped cars. (3) Stage 3 Engine Software and Cold Air Intake required with Throttle Body. Exchange Price - $325 Refundable Core eposit. (5) inan spring set has been designed to work with factory updated spring pads for vehicles produced prior to 7/96. A label on the driver s side B pillar with the number 201 punched out indicates that the update has been done. (7) Rear cover and drive flanges required from stock differential. BMW synthetic fluid not included.exchange Price - $125 Refundable Core eposit. Sport models are factory equipped with a 3.15 differential. (8) Specify carpet color. (9) 18 inch or larger wheels required. (10) Performance Transmission Software required.stage 4 Engine Software and Cold Air Intake required with High Flow Air Flow Meter. (11) Performance Transmission Software required. Stage 4 Engine Software, Cold Air Intake and Throttle Body required with High Flow Air Flow Meter. (12) Stage 5 Engine Software, Cold Air Intake, Throttle Body and High Flow Air Flow Meter required with High Flow Intake Manifold. (13) Supercharger System includes the inan Supplemental Powertrain Warranty at no additional cost. See page 143 for details. (14) Supercharger System includes the High Flow Intake Manifold and Air Flow Meter. (15) Suspension system maintains load leveling system. 3.45 Limited Slip ifferential available as an option. (16) Suspension system is for cars without load leveling. 3.45 Limited Slip ifferential available as an option. (17) Includes driveshaft and hardware. Built to order. (18) Includes driveshaft, rear axles and hardware. Built to order. (19) ue to the installation of larger fuel injectors for the supercharger system, the fuel consumption and range data displayed will be inaccurate.

740i, il (E38) 1995 Page 21 Year escription Part No. Code Price Labor Notes SIGNATURE VEHICLES 1995 inan S 740 SE38-4095S $2547 46 units 1995 inan S1 740 SE38-4095S1ML $3647 131 units (6) 1995 inan S1 740 SE38-4095S1EL $4107 131 units (7) 1995 inan S2 740 SE38-4095S2ML $7907 161 units (6) 1995 inan S2 740 SE38-4095S2EL $8367 161 units (7) 1995 inan S3 740 SE38-4095S3ML-B $20,477 415 units (6) 1995 inan S3 740 SE38-4095S3EL-B $20,937 415 units (7) PERFORMANCE CHIPS 95 Engine Chip See Pg. 128 C $399 8 units <1> 95 Transmission Chip See Pg. 130 C $199 8 units ENGINE PERFORMANCE UPGRAES 6/95-> Cold Air Intake-Aluminum 760-0650 $599 30 units <1> 95 Replacement Air Filter for 403-0410 G $50 High Flow Cold Air Intake Systems 95 Air Filter Sock 401-0113 G $20 95 Free Flow Exhaust 660-7420 F $1799 30 units <1> (coupler attachment) SUSPENSION SYSTEMS 95 Stage 1 (w/o EC or HLL) 190-7045B $1560 85 units (3) 95 Stage 1-with HLL 190-7051B $1100 85 units (3) 95 Spring Set (w/o EC or HLL) 100-0459 $506 70 units (3) 95 Spring Set (w/ EC and/or HLL) 100-0477 $506 70 units (3) 95 Bilstein Rear Shock (ea.) 140-0355 $230 17.5 units 95 Bilstein Front Strut (Left) 140-0381 $297 15 units 95 Bilstein Front Strut (Right) 140-0382 $297 15 units BRAKES 95 Stage 1 Front Brake Conversion 290-3800 G $1757 40 units (5) 95 Stage 2 Front & Rear Brakes 290-3801 G $3169 70 units (5) 95 Replacement Front Pads (pair) 251-0400 G $132 95 Replacement Rear Pads (pair) 251-0401 G $94 RIVELINE MOIFICATIONS 95 3.73 Limited Slip ifferential 773-0740 G $4260 30 units (4) SUPERCHARGER SYSTEM 95 Stage 1 Supercharger System 860-7510 F $9999 200 units <1> (8) 95 Replacement Air Filter for 401-0420 G $107 Supercharger System ACCESSORIES 95 Signature Floor Mats (f/r) Floor Mats G $150 (9) (3) inan spring set has been designed to work with factory updated spring pads, for vehicles produced prior to 7/96. A label on the driver s side B pillar with the number 201 punched out indicates the update has been done. (4) Exchange Price - $1000 Refundable Core eposit (5) 18 or larger wheels required. (6) Suspension system maintains load leveling system. (7) Suspension system is for cars without load leveling or to eliminate load leveling feature. (8) ue to the installation of larger fuel injectors for the supercharger system, the fuel consumption and range data displayed will be inaccurate. (9) Specify carpet color.

750iL (E32) 1988-94 PERFORMANCE LEGACY SERIES Page 22 Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 88-94 Engine Chip Set See Pg. 128 C $499 12.5 units <1> 88-94 Transmission Chip See Pg. 130 C $199 8 units ENGINE PERFORMANCE UPGRAES 88-94 Free Flow Exhaust (weld-on) 660-7501 G $999 20 units <1>,(1) SUSPENSION SYSTEMS 7/87-3/88 Stage 1-maintain HLL (Bilstein) 190-7715 $844 80 units 4/88-7/90 Stage 1-maintain HLL (Bilstein) 190-7711B $844 80 units 4/88-7/90 Stage 1-maintain HLL (Koni) 190-7711K $782 80 units 8/90-94 Stage 1-maintain HLL (Bilstein) 190-7731B $800 80 units 8/90-94 Stage 1-maintain HLL (Koni) 190-7731K $896 80 units 4/88-7/90 Stage 1-eliminate HLL (Bilstein) 190-7721B $1537 95 units 7/87-3/88 Stage 1-eliminate HLL (Bilstein) 190-7725 $1577 95 units 8/90-94 Stage 1-eliminate HLL (Bilstein) 190-7741B $1533 95 units 4/88-7/90 Stage 2-maintain HLL (Bilstein) 190-7712B $1447 100 units 4/88-7/90 Stage 2-maintain HLL (Koni) 190-7712K $1385 100 units 7/87-3/88 Stage 2-maintain HLL (Bilstein) 190-7716 $1447 100 units 8/90-94 Stage 2-maintain HLL (Bilstein) 190-7732B $1403 100 units 8/90-94 Stage 2-maintain HLL (Koni) 190-7732K $1499 100 units 4/88-7/90 Stage 2-eliminate HLL (Bilstein) 190-7722B $2136 115 units 7/87-3/88 Stage 2-eliminate HLL (Bilstein) 190-7726 $2136 115 units 8/90-94 Stage 2-eliminate HLL (Bilstein) 190-7742B $2092 115 units 4/88-7/90 Stage 3-maintain HLL (Bilstein) 190-7713B $1696 110 units 4/88-7/90 Stage 3-maintain HLL (Koni) 190-7713K $1634 110 units 7/87-3/88 Stage 3-maintain HLL (Bilstein) 190-7717 $1696 110 units 8/90-94 Stage 3-maintain HLL (Bilstein) 190-7733B $1652 110 units 8/90-94 Stage 3-maintain HLL (Koni) 190-7733K $1748 110 units 4/88-7/90 Stage 3-eliminate HLL (Bilstein) 190-7723B $2385 125 units 7/87-3/88 Stage 3-eliminate HLL (Bilstein) 190-7727 $2385 125 units 8/90-94 Stage 3-eliminate HLL (Bilstein) 190-7743B $2341 125 units 1988-94 750iL products and footnotes continued next page... (1) Standard exhaust tips. Polished stainless tips not available.

750iL (E32) 1988-94 (Continued) PERFORMANCE LEGACY SERIES Page 23 Year escription Part No. Code Price Labor Notes 7/87-94 Spring Set-maintain HLL 100-0438 $458 60 units 7/87-94 Spring Set-eliminate HLL 100-0439 $443 60 units 8/90-94 Bilstein Front Strut Insert (ea.) 140-0345 $171 17.5 units 8/90-94 Koni Front Strut Insert (ea.) 140-1345 $219 17.5 units 7/87-7/90 Bilstein Front Strut Insert (ea.) 140-0320 $193 17.5 units 4/88-7/90 Koni Front Strut Insert (ea.) 140-1341 $233 17.5 units 4/88-94 Bilstein Rear Shock (ea.) 140-0355 $230 20 units 88-94 F-Swaybar-Adj. (27 mm) 120-0131 $279 10 units 88-94 R-Swaybar-Adj. (21 mm) 120-0330 $280 15 units 7/87-7/90 Front Camber Plates 160-0060 $226 35 units 8/90-94 Front Camber Plates 160-0065 $248 35 units 88-94 HLL Maintenance Kit 130-0120 $44 (4) GAUGE KITS 88-94 Gauge Panel Only (w/o ASC) 493-0102 F $199 88-94 Gauge Panel Only (w/ ASC) 493-0103 F $199 (4) Installation time included in suspension systems labor.

740i, il (E32) 1993-94 PERFORMANCE LEGACY SERIES Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 93-94 Engine Chip See Pg. 128 C $399 8 units <1> 93-94 Transmission Chip See Pg. 130 C $199 8 units ENGINE PERFORMANCE UPGRAES 93-94 Free Flow Exhaust (weld-on) 660-7400 G $1099 20 units <1> SUSPENSION SYSTEMS 93-94 Stage 1-w/o HLL (Bilstein) 190-7011B $1186 90 units (5) 93-94 Stage 1-maintain HLL (Bilstein) 190-7021B $791 80 units (5) 93-94 Stage 1-maintain HLL (Koni) 190-7021K $887 80 units 93-94 Stage 1-eliminate HLL (Bilstein) 190-7031B $1474 95 units (5) 93-94 Stage 2-w/o HLL (Bilstein) 190-7012B $1842 110 units (5) 93-94 Stage 2-maintain HLL (Bilstein) 190-7022B $1735 100 units (5) 93-94 Stage 2-maintain HLL (Koni) 190-7022K $1831 100 units 93-94 Stage 2-eliminate HLL (Bilstein) 190-7032B $2130 115 units (5) 93-94 Stage 3-w/o HLL (Bilstein) 190-7013B $2090 120 units (5) 93-94 Stage 3-maintain HLL (Bilstein) 190-7023B $1740 110 units (5) 93-94 Stage 3-maintain HLL (Koni) 190-7023K $1836 110 units 93-94 Stage 3-eliminate HLL (Bilstein) 190-7033B $2378 125 units (5) 93-94 Spring Set (maintaining HLL) 100-0454 $449 60 units 93-94 Spring Set (eliminating HLL or 100-0453 $449 60 units without HLL) 93-94 Bilstein Front Strut Insert (ea.) 140-0345 $171 17.5 units 93-94 Bilstein Rear Shock (ea.) 140-0355 $230 20 units 93-94 Koni Front Strut Insert (ea.) 140-1345 $219 17.5 units (5) 93-94 F-Swaybar-Adj. (27 mm) 120-0245 $376 10 units 93-94 R-Swaybar-Adj. (21 mm) 120-0330 $280 15 units 93-94 Front Camber Plates 160-0065 $248 35 units 93-94 HLL Maintenance Kit 130-0120 $44 (1) SUPERCHARGER SYSTEMS 93-94 Stage 1 Supercharger System 860-7410 F $8999 200 units <1> 93-94 Replacement Air Filter for 401-0413 G $83 Supercharger System Page 24 (1) Installation time is included in Suspension Systems labor quotes. (5) Koni adjustable front struts may be substituted for Bilstein struts improving ride quality.

735i, il (E32) 1988-92 PERFORMANCE LEGACY SERIES Page 25 Models Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 735i,iL 88-92 Engine Chip See Pg. 128 C $249 8 units <1> 735i,iL 88-92 Transmission Chip See Pg. 130 C $199 8 units ENGINE PERFORMANCE UPGRAES 735i,iL 88-92 Free Flow Exhaust (weld-on) 660-7352 G $813 20 units <1> 735i,iL 3/88-92 High-Flow Intake Manifold 760-0340 G $899 40 units <1>,(1) SUSPENSION SYSTEMS 735i 4/88-7/90 Stage 1 (Bilstein) 190-0761B $1288 90 units 735i 7/87-3/88 Stage 1 (Bilstein) 190-0765B $1288 90 units 735i 8/90-92 Stage 1 (Bilstein) 190-7761B $1244 90 units 735iL 4/88-7/90 Stage 1-maintain HLL (Bilstein) 190-0771B $843 80 units 735iL 4/88-7/90 Stage 1-maintain HLL (Koni) 190-0771K $923 80 units 735iL 7/87-3/88 Stage 1-maintain HLL (Bilstein) 190-0775B $843 80 units 735iL 8/90-92 Stage 1-maintain HLL (Bilstein) 190-7771B $799 80 units 735iL 8/90-92 Stage 1-maintain HLL (Koni) 190-7771K $895 80 units 735iL 4/88-7/90 Stage 1-eliminate HLL (Bilstein) 190-0781B $1526 95 units 735iL 7/87-3/88 Stage 1-eliminate HLL (Bilstein) 190-0785 $1576 95 units 735iL 8/90-92 Stage 1-eliminate HLL (Bilstein) 190-7781B $1532 95 units 735i 4/88-7/90 Stage 2 (Bilstein) 190-0762B $1847 110 units 735i 7/87-3/88 Stage 2 (Bilstein) 190-0766B $1847 110 units 735i 8/90-92 Stage 2 (Bilstein) 190-7762B $1803 110 units 735iL 4/88-7/90 Stage 2-maintain HLL (Bilstein) 190-0772B $1446 100 units 735iL 4/88-7/90 Stage 2-maintain HLL (Koni) 190-0772K $1526 100 units 735iL 7/87-3/88 Stage 2-maintain HLL (Bilstein) 190-0776 $1446 100 units 735iL 8/90-92 Stage 2-maintain HLL (Bilstein) 190-7772B $1402 100 units 735iL 8/90-92 Stage 2-maintain HLL (Koni) 190-7772K $1498 100 units 735iL 4/88-7/90 Stage 2-eliminate HLL (Bilstein) 190-0782B $2135 115 units 1988-92 735i, il products and footnotes continued next page... (1) Exchange Price - $300 Refundable Core eposit.

735i, il (E32) 1988-92 (Continued) PERFORMANCE LEGACY SERIES Page 26 Models Year escription Part No. Code Price Labor Notes SUSPENSION SYSTEMS (continued) 735iL 7/87-3/88 Stage 2-eliminate HLL (Bilstein) 190-0786 $2135 115 units 735iL 8/90-92 Stage 2-eliminate HLL (Bilstein) 190-7782B $2091 115 units 735i 4/88-7/90 Stage 3 (Bilstein) 190-0763B $2096 120 units 735i 7/87-3/88 Stage 3 (Bilstein) 190-0767B $2096 120 units 735i 8/90-92 Stage 3 (Bilstein) 190-7763B $2052 120 units 735iL 4/88-7/90 Stage 3-maintain HLL (Bilstein) 190-0773B $1695 110 units 735i,iL 4/88-7/90 Stage 3-maintain HLL (Koni) 190-0773K $1775 110 units 735iL 7/87-3/88 Stage 3-maintain HLL (Bilstein) 190-0777 $1695 110 units 735iL 8/90-92 Stage 3-maintain HLL (Bilstein) 190-7773B $1651 110 units 735i,iL 8/90-92 Stage 3-maintain HLL (Koni) 190-7773K $1747 110 units 735iL 4/88-7/90 Stage 3-eliminate HLL (Bilstein) 190-0783B $2384 125 units 735iL 7/87-3/88 Stage 3-eliminate HLL (Bilstein) 190-0787 $2384 125 units 735iL 8/90-92 Stage 3-eliminate HLL (Bilstein) 190-7783B $2340 125 units 735i,iL 8/90-92 Bilstein Front Strut Insert (ea.) 140-0345 $171 17.5 units 735i,iL 8/90-92 Koni Front Strut Insert (ea.) 140-1345 $219 17.5 units (1) 735i,iL 88-7/90 Bilstein Front Strut Insert (ea.) 140-0320 $193 17.5 units 735iL 4/88-7/90 Koni Front Strut Insert (ea.) 140-1341 $233 17.5 units 735i,iL 88-92 Bilstein Rear Shock (ea.) 140-0355 $230 20 units (2) 735i,iL 88-92 Spring Set-elim. HLL (Stg.1,2) 100-0430 $442 60 units 735i,iL 88-92 Spring Set-maint. HLL (Stg.1,2) 100-0432 $457 60 units 735i,iL 88-92 Spring Set-elim. HLL (Stg. 3,4) 100-0429 $442 60 units 735i,iL 88-92 Spring Set-maint. HLL (Stg.3,4) 100-0437 $457 60 units 735i,iL 88-92 F-Swaybar-Adj. (27 mm) 120-0131 $279 10 units 735i,iL 88-92 R-Swaybar-Adj. (21 mm) 120-0330 $280 15 units 735i,iL 88-7/90 Front Camber Plates 160-0060 $226 35 units 735i,iL 8/90-92 Front Camber Plates 160-0065 $248 35 units 735iL 88-92 HLL Maintenance Kit 130-0120 $44 (3) 735i,iL 88-92 Control Arm Bushing (ea.) 280-0105 G $62.50 10 units RIVELINE TUNING 735i,iL 88-92 Short Shifter Assembly 550-1002 $159 8 units GAUGE PANELS 735i,il 88-92 Gauge Panel Only 493-0101 E $199 (1) Koni adjustable strut may be substituted for improved ride quality. (2) educt 10 labor units if car does not have hydraulic load leveling (HLL). (3) Installation time included in Suspension Systems labor quotes.

735i, L7 (E23) 1985-87 PERFORMANCE LEGACY SERIES Page 27 Models Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 735i,L7 85-87 Engine Chip 900-3521 C $249 8 units <1> RIVELINE MOIFICATIONS 735i,L7 85-87 High Perf. Pressure Plate 553-0114 $599 60 units

733i (E23) 1983-84 PERFORMANCE LEGACY SERIES Page 28 Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 84 Engine Chip See Page 128 C $249 8 units <1>

M6 (US, E24) 1987-88 PERFORMANCE LEGACY SERIES Page 29 Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 87-88 Engine Chip See Pg. 128 C $249 8 units <1> ENGINE PERFORMANCE UPGRAES 87-88 Cam Sprocket 521-0401 G $229 50 units <3> 87-88 Bilstein Front Strut Insert (ea.) 140-0290 $153 12.5 units 87-88 Bilstein Rear Shock (ea.) 140-0300 $124 17.5 units 87-88 F-Swaybar-Adj. (25 mm) 120-0280 $368 35 units 87-88 R-Swaybar-Adj. (19 mm) 120-0291 $224 30 units (1) 87-88 Front Camber Plates 160-0050 $211 35 units 87-88 Camber Adj. R-Subframe Kit 170-1051 $299 120 units 87-88 HLL Maintenance Kit 130-0110 $36 (1) 87-88 Control Arm Bushing (ea.) 280-0100 G $50 15 units RIVELINE MOIFICATIONS 87-88 High Perf. Pressure Plate 553-0114 $599 65 units (1) HLL Maintenance Kit required for installation of rear bar on cars equipped with Hydraulic Load Leveling System.

M6 (EURO, E24) 1984-88 PERFORMANCE LEGACY SERIES Page 30 Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 84-88 Engine Chip 900-3420 C $249 8 units <1> 84-88 Bilstein Front Strut Insert (ea.) 140-0290 $153 12.5 units 84-88 Bilstein Rear Shock (ea.) 140-0300 $124 12.5 units 84-88 F-Swaybar-Adj. (25 mm) 120-0280 $368 35 units 84-88 R-Swaybar-Adj. (19 mm) 120-0291 $224 30 units 84-88 Front Camber Plates 160-0050 $211 35 units 84-88 Camber Adj. R-Subframe Kit 170-1051 $299 120 units 84-88 Spring Support (ea.) 151-0369 $54 84-88 Control Arm Bushing (ea.) 280-0100 G $50 15 units RIVELINE MOIFICATIONS 84-88 High Perf. Pressure Plate 553-0114 $599 65 units

635CSi, L6 (E24) 1988-89 PERFORMANCE LEGACY SERIES Page 31 Models Year escription Part No. Code Price Labor Notes PERFORMANCE CHIPS 635CSi,L6 88-89 Engine Chip See Pg. 128 C $249 8 units <1> 635CSi,L6 88-89 Transmission Chip 902-0039 C $199 8 units 635CSi,L6 88-89 Bilstein Front Strut Insert (ea.) 140-0290 $153 12.5 units 635CSi,L6 88-89 Bilstein Rear Shock (ea.) 140-0300 $124 17.5 units 635CSi,L6 88-89 F-Swaybar-Adj. (25 mm) 120-0280 $368 35 units 635CSi,L6 88-89 R-Swaybar-Adj. (19 mm) 120-0291 $224 30 units (1) 635CSi,L6 88-89 Front Camber Plates 160-0050 $211 35 units 635CSi,L6 88-89 Camber Adj. R-Subframe Kit 170-1051 $299 120 units 635CSi,L6 88-89 HLL Maintenance Kit 130-0110 $36 (1) 635CSi,L6 88-89 Control Arm Bushing (ea.) 280-0100 G $50 15 units RIVELINE MOIFICATIONS 635CSi,L6 88-89 High Perf. Pressure Plate 553-0114 $599 65 units (1) HLL Maintenance Kit required for installation of rear bar on cars equipped with Hydraulic Load Leveling System.