Official Powerdyne Model BD Supercharger and Kit Limited Warranty
|
|
- Milo Cannon
- 5 years ago
- Views:
Transcription
1
2 Official Powerdyne Model BD Supercharger and Kit Limited Warranty Powerdyne Automotive Products Inc. warrants your new Powerdyne model BD Supercharger and installation kit to be free of defects in workmanship and materials for a period of three years (36 months) from the date of purchase by the original end user. Repaired superchargers are warranted for 6 months from the date of repair. Prior factory authorization must be obtained to return any part for warranty inspection. Supercharger or kit parts authorized to be inspected for repair or replacement under warranty must be shipped freight prepaid to Powerdyne. Determination of actual warranty qualifications rests solely with Powerdyne. Superchargers will not qualify for warranty if the supercharger pulley has been removed or changed, or if the pulley warranty seal has been broken or tampered with and/or if the kit parts have been altered or improperly installed. Superchargers used for racing, amateur or professional, are specifically excluded from any warranty protection. Authorized warranty is limited to repair or replacement only, with no refunds or credits allowed. Warranted superchargers will continue to be protected under the original 3-year warranty, or the 6-month repair warranty, whichever is longer. Supercharger or kit repairs under warranty will be returned to the owner with ground transportation charges prepaid by Powerdyne, within the continental US, or to the point of embarkation within the continental US, via UPS ground (or similar), service; owner will be responsible for any other charges in service requested or freight charges outside the continental US. Superchargers or parts authorized to be returned and inspected which do not qualify for warranty, and are not repaired at the owner s expense, will be subject to a $ (US) inspection fee and returned to the owner transportation charges collect. Powerdyne offers no performance or merchantability warranties, neither offered nor implied. Also, because superchargers are high performance modifications designed to change the performance of engines for which they are designed, and because Powerdyne has no control over the adequacy and correctness of the installation and actual use, Powerdyne expressly disclaims and responsibility or liability for possible engine damage, or any consequential damages which may occur. This warranty is the sole and exclusive warranty offered by Powerdyne Automotive products Inc. No employee or agent may enlarge or modify its terms and/or conditions. Warranty Procedure Telephone Powerdyne Automotive Products at (661) , during California business hours of 8am to 3pm, Monday through Friday, with the following information: 1. Serial number of the supercharger. 2. Description of the problem. 3. Make, Model, and Year of the vehicle. 4. Your name, shipping address (No PO Boxes allowed), and your daytime telephone number. 5. A copy of your original purchase invoice. Upon receipt of the above, if warranty service is appropriate, a Powerdyne Return Authorization Number will be assigned. You should then send the supercharger or other defective part, with all of the above information to: Powerdyne Automotive Products Inc. Attn: Repair Dept. 104-C East Avenue K-4 Lancaster, CA The return authorization number must be included on the package. Freight collect shipments will be refused and returned to the sender at the sender s expense.
3 Custom Tuning Sheet Kit Part Number: Blower Serial #: Computer Code: Ph: Fx: Date: / / *Chip voucher void if not redeemed within 90 days of purchase* Vehicle Year: Make: Model: 1or 2 Fuel Cells: VIN #: Fuel Octane: Engine: Throttle Body: MAF Sensor Make: Heads: Intake: Size: Cam/s: Lift Duration / Fuel Injector Make: Header: Cat-Back Type: Powerdyne Part: Cats: 19lb 24lb 30lb 36lb 38lb 42lb Boost: PSI Fuel Pump: Other: Transmission: Rear End Gear: Auto: Man: Tire Size: / / Nitros / HP: Wet: Dry: Comments: Customer Name: Address: City / State / Zip: Phone Number: Powerdyne Automotive Products includes a computer chip or programmer in this kit. Please fill out this certificate and fax to the number above to receive your part. Limit one (1) chip or programmer per serial number. Please allow up to two (2) business weeks for delivery. Leave space blank if that item is stock on your vehicle.
4 Powerdyne Automotive Products Inc. Installation Instructions, 2004 FORD F-150 with 5.4L 3V engine. This manual is intended for the installation of Powerdyne Supercharger kit, Part Number K on Ford F-150 with the 5.4L 3V motor, model years This kit is designed to be 50 state smog legal and as of the writing of this manual C.A.R.B. (California Air Resources Board) exemption is pending. This kit already complies with EPA memorandum 1A, making it smog legal in 49 states providing your states pollution laws do not supercede EPA memorandum 1A. It is very important that these instructions be followed exactly. IF YOU HAVE NOT YET RE- CEIVED YOUR CUSTOM PROGRAMMED TUNE, DO NOT BEGINE THIS INSTALLATION. Premium unleaded fuel with an octane rating of 92 or higher must be used with this Supercharger installed at all times. Failure to use the proper fuel may cause detonation (pinging) and cause severe engine damage. Never change the crank Pulley or the Supercharger Pulley as this will void the factory warranty (see warranty document on the preceding page) and may cause severe engine damage. Component Removal: A. Disconnect negative battery cable from battery. B. Remove the factory air filter enclosure and air intake tube.. C. Disconnect cam sensor connector from cam sensor on driver side front cover. D. Remove fan shroud and factory fan. Step 1. Install the supercharger crankshaft pulley using 3-10mm x 25mm bolts provided in the kit. (refer to fig. 1) To help you with the installation, please read the entire step before proceeding with that step. Only install this kit on an engine with 0 (zero) fuel pressure to avoid fire, injury and possible damage. Make sure that you have a chemical fire extinguisher handy when installing and/or testing any part of the fuel system. DO NOT install any part of the fuel system, or break open any fuel lines near to any source of heat or flame such as a water heater or cigarette. If you are not a qualified mechanic do not attempt this installation. Instead take the vehicle to a qualified mechanic. FIG.#1 2
5 Step 2. Remove intake support bracket and mounting bolt with stud but leave the power steering reservoir bracket in place. (Refer to figure 2). FIG.#2 FIG.#3 Step 4. Install the ribbed pulley and idler shaft below the cam position sensor on the mounting plate using the 2.75 x 3/8-16 allen bolt, washer and pulley retainer. (Refer to figure 4). Step 3. Install the provided supercharger mounting bracket using the.25 spacer, 10mm x 45mm bolt and washer in the lower hole and the 1.60 spacer, 8mm x 110mm and washer in the lower right hole. Use the.450 spacer between the power steering reservoir bracket and the engine and the.770 spacer between the power steering reservoir bracket and the supercharger mounting plate and a 8mm x 120mm bolt and washer in the upper hole. Make sure the cam position sensor wire is routed behind the mounting plate. (Refer to figure 3 and illustration 1 on the next page). 3 FIG.#4
6 Step 5. Install seven 3/8-16 x 2.0 allen bolts, washers and 1.0 spacers loosely in the supercharger mounting holes. (Refer to figure #5). Step #7. Install the discharge tube from the supercharger outlet to the throttle body using the silicone sleeves and hose clamps provided. (Refer to figure #7). FIG.#5 Step 6. Install the supercharger to the mounting bracket and tighten evenly. (Refer to figure #6). FIG.#7 Step 8. Install the provided K belt and supercharger tensioner and tighten. (Refer to figure 8) FIG.#8 FIG.#6
7 Step 9. Install the 90 degree plastic elbow to the inlet of the supercharger pointing towards the passenger side of the vehicle using the 3.5 x 2.0 silicone sleeve and two #56 hose clamps. (Refer to figure#9). Step 11. Install four air filter mounting to the intake manifold and supercharger mounting bolt. (Refer to figure 11) FIG.#9 Step 10. Install the cast aluminum elbow and flex hose to the bottom of the factory air filter enclosure using the hose clamps provided. (Refer to figure #10). FIG.#11 Step 12. Install the air filter enclosure to the brackets with hardware provided and connect the flex hose to the plastic intake elbow using the hose clamps provided. Install your new high flow air filter. Re-install your fan and shroud. Remove the factory flex hose from the intake tube and replace with flex hose and clamps provided. (Refer to figure 12) FIG.#10 FIG.#12
8 Step 13. Install the supplied bypass valve with the short hose going to the 90 degree fitting on the intake elbow and the long end going to the discharge tube. Use the supplied vacuum line and vacuum tee to connect to manifold vacuum at the fuel pressure regulator on the fuel rail. (Refer to figure #13). Step 14. Re-connect the mass air wire harness to the air filter enclosure you may need to unwrap the tape and remove the wire from the factory wire loom for it to reach to the mass air meter connection. Step 15. Install your performance program by carefully following their instructions. (Note: do not run the vehicle until the computer program is installed). Check all wiring, hoses and fuel lines for clearance of moving parts, sharp edges and heat sources that may cause damage. Reroute if necessary. Turn ignition to key on but do not start. This will energize the fuel pump and allow you to check for any fuel leaks. If any fuel leaks are detected correct the problem before starting the engine. Start the engine and check for proper belt alignment and tension. Note over time your supercharger belt may stretch slightly. Check belt periodically and adjust tension as needed. Your supercharger kit is now complete. Suggested add on. Although your Powerdyne supercharger is designed to work flawlessly on a stock vehicle to maximize a good set of headers and a cat back exhaust system would be beneficial.
Installation Instructions and Warranty Information
Installation Instructions and Warranty Information 1999 2003 Ford SuperDuty Truck and Excursion Part# 1669S, 1669S-1, 1669S-2 Read all instructions carefully before attempting installation. Rev. 10/05
More informationInstallation Instructions and Warranty Information
Installation Instructions and Warranty Information 1625S 96-98 Mustang 4.6L 2v 1-1/2 1625S-8 96-98 Mustang 4.6L 2v 1-5/8 1625S-1 99-04 Mustang 4.6L 2v 1-1/2 1625S-9 99-04 Mustang 4.6L 2v 1-5/8 1625S-5JT
More informationInstallation Instructions and Warranty Information
Installation Instructions and Warranty Information For JBA Headers 1997-2004 Chevrolet Corvette and z06 LS-1 / LS-6 V-8 Part# Application 1817 97-99 with 1-5/8 tube 1817-1 01-04 with 1-5/8 tube 1817-2
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER:22-489 2004 MAZDA Miata Mazdaspeed L4-1.8L C.A.R.B. E.O. # D-670 PARTS LIST Description Qty. Part Number Element
More informationHI-FLOW FUEL RAIL. Installation Instructions for Scion tc & xb AEM Fuel Rail AN Hose adaptor
HI-FLOW FUEL RAIL Installation Instructions for 08-10 Scion tc & xb 25-170 AEM Fuel Rail 2-661 -6 AN Hose adaptor AEM Performance Electronics INC. 2205 126 TH Street, Unit A Hawthorne, CA. 90250 Phone:
More informationInstallation Instructions and Warranty Information For Ford F-250 & F-350 Trucks with 7.5L V8 Auto. Transmission Only
Installation Instructions and Warranty Information For 1988-1998 Ford F-250 & F-350 Trucks with 7.5L V8 Auto. Transmission Only Part# 1629SJT, 1629-1SJT, Requires part# 1629YJT, 1629Y-1JT, 1629Y-2JT, or
More informationPART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8020 2006 PONTIAC GTO V8-6.0L SEE * NOTE 2005 PONTIAC GTO V8-6.0L C.A.R.B. E.O. # D-670-2 * NOTE: Legal in California
More informationInstallation Instructions and Warranty Information
Installation Instructions and Warranty Information For 2004-05 Nissan Titan 5.6L Part#1400S Read all instructions carefully before attempting installation. Rev. 10/05 Installation instructions for JBA
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER:21-8402 1999-2004 TOYOTA Tacoma V6-3.4L C.A.R.B. E.O. # D-670 1999-2002 TOYOTA 4Runner V6-3.4L C.A.R.B. E.O. # D-670
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 22-482 2000-2003 MAZDA Miata L4-1.8L C.A.R.B. E.O. # D-392-28 * NOTE: Legal in California only for racing vehicles
More information2015 & 2018 Fender Brace Installation Instructions
2015 & 2018 Fender Brace Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your Fender Brace set was designed with the performance and durability you ve come to
More informationadvanced FLOW engineering Instruction Manual P/N: / / GR/ GR
advanced FLOW engineering Instruction Manual P/N: 51-12332 / 54-12332 / 51-12332-GR/54-12332-GR Make: GM Model: Silverado/Sierra 1500 Year: 14-16 Engine: V8-5.3L / 6.2L w/ Electric Fan Please read the
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 24-6105 2002-2006 ACURA RSX - Excludes Type S L4-2.0L C.A.R.B. E.O. # D-670 * NOTE: Legal in California only for
More information10-RIB BELT SYSTEM UPGRADE INSTALLATION MANUAL
10-RIB BELT SYSTEM UPGRADE INSTALLATION MANUAL 2011-2017 AND UP FORD MUSTANG GT 5.0L COYOTE WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 WWW.WHIPPLESUPERCHARGERS.COM
More informationRear Upper Camber Link (12425) Scion tc
Rear Upper Camber Link (12425) Scion tc Thank you for your purchase from our new line of Scion tc parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 22-463 1997-1999 TOYOTA Tacoma L4-2.7L C.A.R.B. E.O. # D-392-18 1997-1999 TOYOTA Tacoma L4-2.4L C.A.R.B. E.O. #
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 22-544 2002-2006 NISSAN Sentra SE-R Spec-V L4-2.5L C.A.R.B. E.O. # D-670 * NOTE: Legal in California only for racing
More information10-rib belt system upgrade Installation Manual
10-rib belt system upgrade Installation Manual 2011-2017 and up Ford MUSTANG gt 5.0l coyote WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 A color PDF of
More information2006 SHOCK TOWER BRACE 93-UP F-BODY CAMARO/FIREBIRD
2006 SHOCK TOWER BRACE 93-UP F-BODY CAMARO/FIREBIRD Thank you for your purchase of this Hotchkis Performance product. Please call us at (800) 4NO-ROLL if you have any questions regarding this product.
More informationadvanced FLOW engineering Instruction Manual P/N: / Make: Ford Model: Mustang GT Year: Engine: V8-5.0L
advanced FLOW engineering Instruction Manual P/N: 51-73203 / 54-73203 Make: Ford Model: Mustang GT Year: 2015-2017 Engine: V8-5.0L Please read the entire instruction manual before proceeding. Ensure all
More informationV8-4.7L (C.A.R.B D /20)
advanced FLOW engineering Instruction Manual P/N: 51-12262-1 / 54-12262-1 Make: Toyota Model: Tundra Year: 2000-2004 Engine: V8-4.7L Make: Toyota Model: Sequoia Year: 2001-2004 Engine: V8-4.7L (C.A.R.B
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8013 2001-2004 CHEVROLET Silverado 2500 HD V8-6.6L DSL C.A.R.B. E.O. # D-670-2 2001-2004 CHEVROLET Silverado
More information1107 Tubular Upper A-Arms Camaro/Firebird
1107 Tubular Upper A-Arms 67-69 Camaro/Firebird Thank you for your purchase from our new line of F-Body parts. Please call us at (877) 4NO - ROLL if you have any questions regarding the service or installation
More informationDual Fueler Kit Dodge Cummins 6.7L kit w/no pump ( ) package w/pump ( ) Installation Guide
Pacific Performance Engineering, Inc. www.ppediesel.com Dual Fueler Kit Dodge Cummins 6.7L 2007.5-2010 kit w/no pump (2130030) 2007.5-2010 package w/pump (2130031) Installation Guide Technical Support
More informationadvanced FLOW engineering Instruction Manual P/N: B/1P & B/1P CARB EO: D for Models.
advanced FLOW engineering Instruction Manual P/N: 51-11972-1B/1P & 54-11972-1B/1P Make: Ford Model: Super Duty F-250/F-350 Year: 2011-2016 Engine: V8-6.2L CARB EO: D-550-15 for 2011-2014 Models. Please
More information5) The trailing arm should then pivot smoothly on the chassis. 6) Install the rear bolt. 7) Place one drop of blue Loctite
INSTALLATION INSTRUCTIONS 1301 / 1302 / 1305 / 1306 THANK YOU FOR CHOOSING HOTCHKIS PERFORMANCE PRODUCTS Removal of Stock Lower Trailing Arms 1) Place car on level surface. 2) Support rear of the car on
More informationSport Sway Bar Kit Chevy Camaro
Sport Sway Bar Kit 22109 2010 Chevy Camaro Thank you for your purchase from our new line of Chevy parts. Please call us at 877-4NO - ROLL if you have any questions regarding the service or installation
More informationPART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8023 2007-08 CADILLAC Escalade V8-6.2L Exc. Mechanical Fan C.A.R.B. E.O. # D-670-2 2007-08 CHEVROLET Avalanche
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-703C (Gun Metal Grey Finish) 21-703P (Vacuum Metalized Chrome - VMC) 2011-2013 FORD Fiesta L4-1.6L C.A.R.B. E.O.
More informationadvanced FLOW engineering Stage-2 Air Intake Instruction Manual P/N: /
advanced FLOW engineering Stage-2 Air Intake Instruction Manual P/N: 54-12402 / 51-12402 Make: Dodge/RAM Model: 1500 Year: 2009-2018 Engine: V8-5.7L HEMI Please read the entire instruction manual before
More information14366, Adjustable Strut Rods Chrysler A-Body Chrysler B-Body Chrysler E-Body
14366, 14385 Adjustable Strut Rods 67-76 Chrysler A-Body 1966-1970 Chrysler B-Body 1970-1974 Chrysler E-Body Thank you for your purchase from our new line of B & E-Body parts. Please call us at (877) 4NO
More informationadvanced FLOW engineering Instruction Manual P/N: Make: BMW Model: M3/M4 (F80/82/83) Year: Engine: L6-3.
advanced FLOW engineering Instruction Manual P/N: 52-76305 Make: BMW Model: M3/M4 (F80/82/83) Year: 2015-2016 Engine: L6-3.0L (tt) S55 Please read the entire instruction manual before proceeding. Ensure
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 22-547 2003-2006 NISSAN 350Z V6-3.5L C.A.R.B. E.O. # D-670 * NOTE: Legal in California only for racing vehicles
More informationadvanced FLOW engineering Instruction Manual P/N: / Make: GM Model: Silverado/Sierra 1500 Year: Engine: V8-5.3L / 6.
advanced FLOW engineering Instruction Manual P/N: 51-74104 / 54-74104 Make: GM Model: Silverado/Sierra 1500 Year: 2014-2017 Engine: V8-5.3L / 6.2L Please read the entire instruction manual before proceeding.
More informationThe Next Generation of Intakes advanced FLOW engineering. Instruction Manual P/N: E
The Next Generation of Intakes advanced FLOW engineering Instruction Manual P/N: 51-76105-E Make: Nissan Model: Titan XD Year: 2016 Engine: V8-5.0L (td) Cummins Please read the entire instruction manual
More informationAEROMOTIVE Part # INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14102 INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend that this installation be carried
More informationReference Guide and Step-by-Step Installation Manual
Reference Guide and Step-by-Step Installation Manual Some adjustable features listed on the following pages are NOT applicable for all applications. The year, make, and model of the vehicle will determine
More informationadvanced FLOW engineering Instruction Manual P/N: / / /
advanced FLOW engineering Instruction Manual P/N: 55-12550 / 55-12551 / 55-12540 /55-12541 Make: Toyota Model: Tundra Year: 2007-2017 Engine: V8-4.6L/5.7L Please read the entire instruction manual before
More informationSport Sway Bar Kit UP SCION xb
Sport Sway Bar Kit 22429 08-UP SCION xb Thank you for your purchase from our new line of Scion parts. Please call us at 877-4NO - ROLL if you have any questions regarding the service or installation of
More information1204AA Ford Mustang Double Adjustable Trailing Arms
1204AA 79-04 Ford Mustang Double Adjustable Trailing Arms Thank you for your purchase from our new line of Ford parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or
More informationBP1204 INSTALLATION/OWNER'S MANUAL
BP1204 INSTALLATION/OWNER'S MANUAL BP1204 PREPARATION Getting Started Thank you for purchasing the Dual Electronics BP1204 Bandpass Subwoofer System. Although Dual has attempted to ensure the information
More information25405 COMPETITION END LINK KIT 2002-UP ACURA RSX, 2004 Subaru STi INSTALLATION OF HOTCHKIS FRONT ENDLINKS
25405 COMPETITION END LINK KIT 2002-UP ACURA RSX, 2004 Subaru STi Thank you for your purchase from our line of competition parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8018 2006 HUMMER H3 L5-3.5L C.A.R.B. E.O. # D-670-2 2004-2006 CHEVROLET Colorado L5-3.5L C.A.R.B. E.O. # D-670-2
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8304 1991-1995 JEEP Wrangler L4-2.5L C.A.R.B. E.O. # D-670 * NOTE: Legal in California only for racing vehicles
More informationPlease begin by checking that you have received all of the parts that come with your kit.
1 INSTRUCTIONS EZ-EFI 30402-FK In-Line Fuel Kit Thank you for choosing products; we are proud to be your manufacturer of choice. Please read this instruction sheet carefully before beginning installation,
More informationadvanced FLOW engineering Instruction Manual P/N: /
advanced FLOW engineering Instruction Manual P/N: 51-74108 / 54-74108 Make: Chevrolet / GMC Model: 2500HD/3500HD Year: 2016-2017 Engine: V8-6.0L w/ Mech. Fan Please read the entire instruction manual before
More information2006 Honda Civic SI Supercharger Kit Installation Instruction Kit #
2006 Honda Civic SI Supercharger Kit Installation Instruction Kit #350-091 3239 MONIER CIRCLE, STE.5 RANCHO CORDOVA, CA 95742 916.635.4550 FAX 916.635.4632 www.ct-engineering.com INS-157 VERSION: 3.25.2009
More informationadvanced FLOW engineering Instruction Manual P/N: / Momentum GT
advanced FLOW engineering Instruction Manual P/N: 51-76102 / 54-76102 Momentum GT Make: Nissan Model: Frontier Year: 2005-2018 Engine: V6-4.0L Make: Nissan Model: Pathfinder Year: 2005-2012 Engine: V6-4.0L
More information22421 SPORT SWAY BAR SET TOYOTA COROLLA
22421 SPORT SWAY BAR SET 98-01 TOYOTA COROLLA Thank you for your purchase from our line of Corolla parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation
More information8-Rib Drive Upgrade. Installation Instructions Ford 5.0L Mustang GT P/N: 4FQ , 4FQ , 4FQ SUPERCHARGERS
8-Rib Drive Upgrade Installation Instructions 2011-2015 Ford 5.0L Mustang GT P/N: 4FQ116-001, 4FQ116-003, 4FQ116-005 SUPERCHARGERS 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone: 805 247-0226
More information2010 CAMARO COG DRIVE UPGRADE Installation Instructions
2010 CAMARO COG DRIVE UPGRADE Installation Instructions 2010 CAMARO SS (LS3 & L99) P/N: 4GE118-010, 4GE118-020, 4GE118-030 ENGINEERING, LLC 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone 805
More informationadvanced FLOW engineering Instruction Manual P/N: F Make: FORD Model: RANGER Year: Engine: L4-2.3L DOHC
advanced FLOW engineering Instruction Manual P/N: F2-03012 Make: FORD Model: RANGER Year: 2004-2011 Engine: L4-2.3L DOHC Please read the entire instruction manual before proceeding. Ensure all components
More informationadvanced FLOW engineering Instruction Manual P/N: Make: BMW Model: M3 (E90/92/93) Year: Engine: V8-4.0L
advanced FLOW engineering Instruction Manual P/N: 79-10001 Make: BMW Model: M3 (E90/92/93) Year: 2007-2008 Engine: V8-4.0L Please read the entire instruction manual before proceeding. Ensure all components
More informationadvanced FLOW engineering Instruction Manual P/N: Make: Chevrolet Model: Corvette Z06 (C7) Year: 2015 Engine: V8-6.
advanced FLOW engineering Instruction Manual P/N: 52-74202 Make: Chevrolet Model: Corvette Z06 (C7) Year: 2015 Engine: V8-6.2L (sc) Please read the entire instruction manual before proceeding. Ensure all
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-9034 YEAR MAKE MODEL Engine Info 2006-2007 CHEVROLET 2500HD Classic V8-6.6L DSL C.A.R.B. E.O. D-670-13 2006-2007
More informationForbidden Diesel Performance Ford 6.7L Powerstroke EGR Delete Instructions 6.7L EGR DELETE BY FORBIDDEN DIESEL PERFORMANCE. Page 1
6.7L EGR DELETE BY FORBIDDEN DIESEL PERFORMANCE Page 1 WARNING REGARDING EMISSIONS LAWS Not legal for sale or use on pollution-controlled motor vehicles anywhere in the United States. Legal ONLY for off-road
More informationadvanced FLOW engineering Instruction Manual P/N: / / / V/ P/ P
advanced FLOW engineering Instruction Manual P/N: 51-11902-1/54-11902-1/75-11902-1/75-11902-1V/ 51-11902-1P/54-11902-1P Make: Ford Model: F-150 Year: 10-14 Engine: V8-6.2L Make: Ford Model: F-150 SVT Raptor
More informationadvanced FLOW engineering Instruction Manual P/N: /
advanced FLOW engineering Instruction Manual P/N: 51-74103 / 54-74103 Make: Chevrolet/GMC Model: Silverado/Sierra Year: 2009-2013 Engine: V8-4.8L / 5.3L / 6.2L Please read the entire instruction manual
More informationPIVOT BUSHING KIT GM F-BODY
PIVOT BUSHING KIT 21016 67-69 GM F-BODY 67-69 GM F-Body Pivot Bushing Kit Thank you for your purchase. Please call us at 877-4NO - ROLL if you have any questions regarding the service or installation of
More informationadvanced FLOW engineering Instruction Manual P/N: / / /
advanced FLOW engineering Instruction Manual P/N: 55-12550 / 55-12551 / 55-12540 /55-12541 Make: Toyota Model: Tundra Year: 2007-2017 Engine: V8-4.6L/5.7L Please read the entire instruction manual before
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8500 2001-2003 NISSAN Frontier V6-3.3L C.A.R.B. E.O. # D-670 2001-2003 NISSAN Xterra V6-3.3L C.A.R.B. E.O. #
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8203 2003-2005 DODGE RAM 1500 Pickup V8-5.7L C.A.R.B. E.O. # D-670 2003-2005 DODGE RAM 2500 Pickup V8-5.7L C.A.R.B.
More informationCOLD AIR INTAKE SYSTEM
COLD AIR INTAKE SYSTEM Installation Instructions for: Part Number 21-491 2005-2008 Mazda 6i 2.3L NON-PZEV Do not install a bypass valve on this intake system! ADVANCED ENGINE MANAGEMENT INC. 2205 126 TH
More informationPVI 60KW, PVI 82KW, PVI 95KW
PVI 60KW PVI 82KW PVI 95KW WARRANTY MANUAL Commercial, Grid-Tied Photovoltaic Inverters 2008, Solectria Renewables LLC Subject to Change DOC-020099 rev 024 1 1 Product Warranty & RMA Policy Warranty Policy
More informationadvanced FLOW engineering Instruction Manual P/N: / / Make: Toyota Model: Tacoma Year: Engine: V6-4.
advanced FLOW engineering Instruction Manual P/N: 51-76012 / 54-76012 / 75-76012 Make: Toyota Model: Tacoma Year: 2012-2015 Engine: V6-4.0L Please read the entire instruction manual before proceeding.
More informationINSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-477 2006-2007 SUBARU Impreza WRX H4 2.5L Turbo C.A.R.B. E.O. # D-670-15 2004-2007 SUBARU Impreza WRX STi H4 2.5L
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 22-503 2001-2005 HONDA Civic L4-1.7L DX C.A.R.B. E.O. # D-392-29 2001-2005 HONDA Civic L4-1.7L LX C.A.R.B. E.O.
More informationadvanced FLOW engineering Instruction Manual P/N: / Magnum FORCE Stage-2
advanced FLOW engineering Instruction Manual P/N: 51-10312-1 / 54-10312-1 Magnum FORCE Stage-2 Make: Nissan Model: Titan/Armada Year: 2004-2015 Engine: V8-5.6L Make: INFINITI Model: QX56 Year: 2004-2013
More informationEquipped with AEM Dryflow Filter No Oil Required!
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-491B (Blue Finish) 21-491C (Gun Metal Grey Finish) 21-491P (Vacuum Metalized Chrome-VMC) 21-491R (Red Finish)
More informationadvanced FLOW engineering Instruction Manual P/N: TR-1019P / TR-1019B
advanced FLOW engineering Instruction Manual P/N: TR-1019P / TR-1019B Make: Honda Model: Accord Year: 2013-2016 Engine: L4-2.4L Make: Acura Model: TLX Year: 2014-2016 Engine: L4-2.4L Please read the entire
More informationadvanced FLOW engineering Instruction Manual P/N: / / /
advanced FLOW engineering Instruction Manual P/N: 51-12182 / 54-12182 / 51-12192 / 54-12192 Make: Ford Model: F-150 Year: 2011-2012 Engine: V6-3.5L (tt) EcoBoost Please read the entire instruction manual
More information16385 Steering Tie Rods Chrysler A-Body
16385 Steering Tie Rods 1967-76 Chrysler A-Body Before You Start: Thank you for your purchase from our new line of B & E-Body parts. Please call us at (877) 4NO - ROLL if you have any questions regarding
More informationPART NUMBER: C (Gun Metal Grey Finish) P (Vacuum Metalized Chrome - VMC)
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-686C (Gun Metal Grey Finish) 21-686P (Vacuum Metalized Chrome - VMC) 2006-2011 HONDA Civic L4-1.8L C.A.R.B. E.O.
More informationadvanced FLOW engineering Instruction Manual P/N: / Make: BMW Model: 328d/dx (F30/F31) Year: Engine: L4-2.
advanced FLOW engineering Instruction Manual P/N: 51-76307 / 54-76307 Make: BMW Model: 328d/dx (F30/F31) Year: 2014-2016 Engine: L4-2.0L (td) N47 Please read the entire instruction manual before proceeding.
More informationAIR BYPASS VALVE INSTALLATION INSTRUCTIONS
AIR BYPASS VALVE INSTALLATION INSTRUCTIONS PART NUMBERS: 20-400S, 20-401S, 20-402S & 20-403s Read and understand these instructions BEFORE attempting to install this product. Failure to follow installation
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8013 2004 CHEVROLET Silverado 2500 HD V8-6.6L DSL LB7 C.A.R.B. E.O. # D-392-27 2004 CHEVROLET Silverado 3500
More information1109 Tubular Lower A-Arms Camaro/Firebird
1109 Tubular Lower A-Arms 67-69 Camaro/Firebird Tubular Lower A-Arms: Thank you for your purchase from our new line of F-Body parts. Please call us at (877) 4NO - ROLL if you have any questions regarding
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-451B (Blue Finish) 21-451C (Gun Metal Grey Finish) 21-451P (Vacuum Metalized Chrome-VMC) 21-451R (Red Finish)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 1301 / 1302 / 1305 / 1306 THANK YOU FOR CHOOSING HOTCHKIS PERFORMANCE PRODUCTS Removal of Stock Lower Trailing Arms 1) Place car on level surface. 2) Support rear of the car on
More informationadvanced FLOW engineering Instruction Manual P/N: 51/ P & 51/ B Make: Ford Model: Mustang GT Year: Engine: V8-5.
advanced FLOW engineering Instruction Manual P/N: 51/54-11982-P & 51/54-11982-B Make: Ford Model: Mustang GT Year: 2011-2014 Engine: V8-5.0L Please read the entire instruction manual before proceeding.
More information21-413B (Blue Finish) C (Gun Metal Grey Finish) P (Vacuum Metalized Chrome-VMC) R (Red Finish)
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-413B (Blue Finish) 21-413C (Gun Metal Grey Finish) 21-413P (Vacuum Metalized Chrome-VMC) 21-413R (Red Finish)
More informationadvanced FLOW engineering Instruction Manual P/N: F Make: Jeep Model: Wrangler JK Year: Engine: V6-3.6L
advanced FLOW engineering Instruction Manual P/N: F2-06201 Make: Jeep Model: Wrangler JK Year: 2012-2015 Engine: V6-3.6L Please read the entire instruction manual before proceeding. Ensure all components
More informationINSTALLATION INSTRUCTIONS
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8103 1996-2004 FORD Mustang GT V8-4.6L C.A.R.B. E.O. # D-670 Excludes Mustang Bullitt models * NOTE: Legal in
More informationSPORT COIL SPRINGS Scion xa & xb Part #19412 INSTALLATION OF HOTCHKIS FRONT COIL SPRINGS
SPORT COIL SPRINGS 2004+ Scion xa & xb Part #19412 Thank you for your purchase from our new line of Scion xa / xb parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-488 2006-2008 MAZDA 3 L4 2.3L SEE * NOTE 2004-2008 MAZDA 3 L4 2.0L SEE * NOTE 2004-2005 MAZDA 3 L4 2.3L C.A.R.B.
More informationadvanced FLOW engineering Momentum GT Cold Air Intake System Instruction Manual P/N: /
advanced FLOW engineering Momentum GT Cold Air Intake System Instruction Manual P/N: 51-72102 / 54-72102 Make: Dodge/RAM Model: 1500/1500 Classic Year: 2009-2019 Engine: V8-5.7L HEMI Please read the entire
More informationAEROMOTIVE Part # /2 4.6L SOHC Ford Fuel Rail Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14125 96-98 1/2 4.6L SOHC Ford Fuel Rail Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We
More informationThe Next Generation. of Intakes. advanced FLOW engineering Momentum Air Intake. Instruction Manual P/N: E
The Next Generation advanced FLOW engineering Momentum Air Intake Instruction Manual P/N: 51-72005-E Make: RAM Model: 2500/3500 HD Year: 2013-2018 Engine: L6-6.7L (td) of Intakes Please read the entire
More informationadvanced FLOW engineering Instruction Manual P/N: / /
advanced FLOW engineering Instruction Manual P/N: 50-73002 / 51-73002 / 75-73002 Make: Ford Model: Diesel Trucks Year: 1999.5-2003 Engine: V8-7.3L (td) Please read the entire instruction manual before
More informationINSTRUCTIONS PART NUMBER: B
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-432B (Blue Finish) 21-432C (Gun Metal Grey Finish) 21-432P (Vacuum Metalized Chrome-VMC) 21-432R (Red Finish)
More informationadvanced FLOW engineering Instruction Manual P/N: & Make: BMW Model: 335i E90/92/93 Year: Engine: L6-3.
advanced FLOW engineering Instruction Manual P/N: 51-82002 & 54-82002 Make: BMW Model: 135i E82/88 Year: 2008-2010 Engine: L6-3.0L (tt) N54 Make: BMW Model: 335i E90/92/93 Year: 2007-2010 Engine: L6-3.0L
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8214 2006 DODGE Ram 1500 Pickup V6-3.7L C.A.R.B. E.O. # D-670 * NOTE: Legal in California only for racing vehicles
More informationProcharger Stage II Intercooled Supercharger System (11-14 GT)
Procharger Stage II Intercooled Supercharger System (11-14 GT) Installation Time: Approximately one day. Installed on 2012 Mustang GT 5.0/Manual Required Tools 3/8 Socket Set (Standard and Metric) 1/2
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! The installation of this AEM intake system requires some modification to the vehicle s inner fender. A specialized power tool will be needed to modify
More information16366 Steering Tie Rods Chrysler B-Body, Charger, Super Bee, Road Runner, GTX Chrysler E-Body, Cuda, Challenger
P 16366 66-70 B-Body, 70-74 E-Body 16366 Steering Tie Rods 1966-1970 Chrysler B-Body, Charger, Super Bee, Road Runner, GTX 1970-1974 Chrysler E-Body, Cuda, Challenger Thank you for your purchase from our
More informationadvanced FLOW engineering Instruction Manual P/N: R Make: Dodge Model: Challenger / Charger SRT-8 Year: Engine: V8-6.
advanced FLOW engineering Instruction Manual P/N: 51-72203-R Make: Dodge Model: Challenger / Charger SRT-8 Year: 2011-2017 Engine: V8-6.4L HEMI Please read the entire instruction manual before proceeding.
More informationadvanced FLOW engineering Stage-2 Air Intake Instruction Manual P/N: F
advanced FLOW engineering Stage-2 Air Intake Instruction Manual P/N: F2-03013 Make: FORD Model: RANGER Year: 2004-2011 Engine: V6-4.0L Make: MAZDA Model: B4000 Year: 2004-2010 Engine: V6-4.0L Please read
More informationMOVE ON TO THE REAR BAR INSTALLATION
22410 STREET SWAY BAR SET 2001-UP LEXUS IS300 Thank you for your purchase from our line of Lexus parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 22-417 1999-2000 HONDA Civic Si L4-1.6L C.A.R.B. E.O. # D-670 * NOTE: Legal in California only for racing vehicles
More informationP/N# Performance Lowering Springs Installation Instructions
P/N# 19110 Performance Lowering Springs Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your Lowering Spring set was designed with the performance and durability
More information