DFP Double Foot Pedal

Similar documents
AJN Joystick. Introduction. Main Features. Custom Modifications. Electrical SPECIFICATIONS

0 to 100 up to 0 to PSI (gage) Packard Electric Metri-Pack 150 Series, M12-4 Pole* 1/4-18 NPT ma, VDC, 0-5 VDC, 0-10 VDC

Temposonics. MH-Series Analog Redundant. Absolute, Non-Contact Positions Sensors. Temposonics MT Measuring length mm

High-Temperature Axial Extensometer. Measure Strain With Specimens At Temperatures Up To 1200 C (2200 F)

Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors

Data Sheet P4055 Pressure Transducer

Temposonics. M-Series Analog Redundant. Absolute, Non-Contact Positions Sensors. Temposonics MT Measuring length mm

Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors

Data Sheet P4000 Hermetically Sealed Pressure Sensor

OBSOLETE. Data Sheet P1E Oxygen Service Pressure Sensor. Main Features. Typical Applications. Attributes. Description

Data Sheet P1A Pressure Sensor

Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors

Data Sheet P265 Stainless Steel Pressure Transducer

Data Sheet P255 Stainless Steel Pressure Transducer

Data Sheet P6000 Remote Mount Miniature Pressure Sensor

EROWA MTS The EROWA MTS modular workholding system.

SilentFlo Hydraulic Power Units. Quiet, reliable and efficient power generation. be certain.

Data Sheet PS312 Ceramic Capacitive OEM High and Low Pressure Sensing Modules

DA 15 N 06 BLDC 250 DA 15 N 12 BLDC 250

MTS DuraGlide 244 Hydraulic Actuators. Superior fidelity in force generation and motion control. be certain.

Temposonics. Magnetostrictive Linear Position Sensors. MHRM Analog Data Sheet. For embedded or externally threaded installation

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015

APPLICATION NOTE

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at

Temposonics. M-Series PWM. Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm. Document Number Revision B

Data Sheet P992 Low Range Differential Pressure Sensor

Data Sheet PS1B Pressure Switch

Ignition Coils. Ignition Coils. For CATERPILLAR Gas Engines G3400, G3500, G3600 & GCM34 Series. reliable efficient worldwide

DA 15 T 06 BLDC 1000 DA 15 T 12 BLDC 1000

PLEIGER MASCHINENBAU. Valve Actuation, Controls and Automation

MOTORTECH Throttle Bodies For WAUKESHA VHP G/ GSI/ LT 6 & 12 Cylinder Engines

15K Series Extented Mini Right Angle Drill Attachment

G3 UNIVERSAL GRIP CONFIGURATION GUIDE

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder

ORDERING INFORMATION # of Ports Pressure Type Device Device Name Options

Temposonics. M-Series Analogue / SIL2* Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm

SolarEdge System Overview

10LF and 12LF Series Right Angle Grinders

Temposonics. M-Series Analog. Absolute, Non-Contact Position Sensors. Temposonics MH Measuring length mm. Compact Sensor for Mobile Hydraulics

COMBIVERT F5-A-Servo

VariStep3 MOTORTECH Stepper Motor Driver Control

COMBIVERT R6 LINE REGEN SYSTEMS UP TO 1000 KVA V EN

PARALLEL PROCESSING UPS E33A

Typical electrical schematic Maximum continuous operating voltage: 250V, 50/60Hz

Quantum LMV. Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors. GE Power Conversion

Temposonics. Magnetostrictive Linear Position Sensors. MH-Series MH5 Analog Data Sheet

Electrak Throttle Actuator

CONTROL SOLUTIONS FORKLIFT TRUCKS FORKLIFT TRUCKS

6,000 on-off operations according to UL 1054, TV5 10,000 on-off operations according to ENEC. Features and benefits

Data Sheet P265 Stainless Steel Pressure Transducer

BODAS Pressure sensor PR3 series 10

MTS Roehrig EMA Damper Test Systems. Portable, cost-effective linear electric load frames for factory, lab and track. be certain.

P1A Pressure Sensor. Description. Features. Applications MAIN FEATURES

293 Hydraulic Service Manifold l. Model 293.1X HSM configured for dual station control

Electrak Throttle Actuator

Proportional Valve Group PVG 128/256

P255 Stainless Steel Pressure Transducer

Full Fail-Safe RS-485/RS-422 Transceiver with IEC61000 ESD Protection

Microcontroller Unit (MCU) LCD Hour Meters/Counters. LM Series. Datasheet

TOP SMART intelligent position monitor:

10N10 Series Inline Grinder

P500 Pressure Sensor. Description. Features. Applications MAIN FEATURES

ABOT CHASSIS ASSEMBLY GUIDE

Industrial IT for Papermaking. Paper Machine Drive PMC800 Basic Drive

10N M6 Series Right Angle Grinder

Temposonics. M-Series Analog. Magnetostrictive Position Sensors. Temposonics MH Measuring length mm SENSORS

N60 Rotary Vane Pneumatic Motor

R-Series Rod Model RS. Data Sheet. Model RS Rod-style sensor with IP68/IP69K Super Shield Housing. Interrogation Return wire.

IGNITION TOOLS & TEST EQUIPMENT

Planetary Travel & Hoist Drives

Application Note. DA1468x Battery Charging AN-B-035

Temposonics. Absolute, Non-Contact Position Sensors. MH Series. Temposonics MB Analog. Technical Data / Description

Multi Function Efficient Dynamic Altitude Simulation MEDAS

Composites Fixtures. A comprehensive array of polymer matrix composites accessories. be certain.

10LF and 12LF Series Right Angle Grinder and Sander

Pressure transmitters for heavy duty applications MBS 3200 and 3250

Vacuum Generator ECBPi

Wheel Torque Transducer WTT-D x

Mountable with O-ring seal Urea level ±0.5% Accuracy Urea pressure ±2.0 Total Error Band Air Brakes Corrosive fluid measurement for E&V applications

Motion Solutions for Clean Energy Applications. Linear Motion. Optimized.

EQUIVALENT BASIC CIRCUIT

Exceptional Accuracy and Durability for Tough Industrial Environments INDUSTRIAL FLOOR SCALES. VERTEX Industrial Floor Scales Heavy-Duty Design

Differential Pressure Sensors

Eaton. Parts Information. Transaxle Series 781. Hydrostatic Transaxle. No May, 1999

Solutions. Hydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Models and with Pilot Operated Checks

X$D Ultra 841 VSS Vertical Solid Shaft Inline Motors Vertical Solid Shaft High Thrust Motors TEFC - IEEE 841 NEMA Premium

MODEL 8682 SUREFLOW ADAPTIVE OFFSET CONTROLLER

Faster. Count on availability when you need it most H1B Bent Axis Motors Rapid Delivery Center. time to market. powersolutions.danfoss.

One machine multiple applications.

Application Software Dual Path Control DPC

HDT T-Cup Component Gear Sets. Precise Robotic Accuracy Large Center Through Hole Proven Reliability. Total Motion Control. Harmonic Drive gear

Innovative Partnership

Temposonics. Absolute, Non-Contact Position Sensors. MH Series. Temposonics MH Analog /Digital. Technical Data / Description

Type: CIMR-T 4A J Models: 400 V Class, Three-Phase Input: 22 to 110 kw

SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar


x mate M15 Power Motor Connector

Switch Mode Power Supply S8JC-Z / S8JC-ZS / S8JX-G / S8JX-P / S8VK-G / S8VK-C. Power Supply Selection Guide

MS4525 SPECIFICATIONS

Parts Manual. cascade

Transcription:

DFP Double Foot Pedal The DFP double foot pedals from DeltaTech Controls have been developed to provide the reliability required in demanding environmental conditions such as heavy duty industrial applications. The high mechanical strength of the shaft and the unique sensing design make the pedals ideal for rigorous use in rugged, harsh environments. The DFPs have been designed to accommodate standard and custom designed pedal lever. The pedals are available as a voltage version (VO) or as a CAN solution (CA). Mechanical Data Main Features - Contactless sensing Hall effect - Life greater than 3 million cycles - 2 sensors for redundancy - Optional rubber lever cover - Integrated temperature compensation - Protection Class IP67 Electrical Data Supply Ratings 2 Voltage Outputs Dead band at end of travel Other electrical Characteristics Connection (Interface) Life > 5 million cycles Operating temperature - 40 C to 85 C Operating force 60 N ± 20N Load maximum 2000 N Protection Level IP 67 Deflection angle ± 14 tolerance ± 1 Weight 3 kg Housing Steelplate / Aluminium Pull-down resistor (Recommendation) 10kΩ Voltage range DC Current DFP VO (voltage out) 9V 36V* max. 85 ma DFP CA (CAN) 9V 36V max. 85 ma System Voltage 12 /24V 12 /24V Output 1 Output 2 Signals 0,5V 4.5V 4,5 V 0,5 V 2 release signals Release1: active in zero position (low) Release 2: active in zero position (high) max. 5 % n.a. n.a. CAN SAE J 1939 max. 5 % 100V/m 100V/m Harness with 8 pin connector (Fa. Tyco econoseal L Mark II+) Harness with 4 pin connector (Fa. Tyco superseal) EMI *36V tested for 5 minutes

DFP Double Foot Pedal S1 = Start position E1 = End position 1 E2 = End position 2 Lever - start & end position Ordering code 1 Type 1 2 3 4 DFP VO 14 14 Exam ple DFP 2 Function C A = C AN VO = Voltage output 3 Deflection angle E1 = 14 (+ 14 ± 1 ) End position 1 4 Deflection angle E2 = 14 (- 14 ± 1 ) End position 2 5 Operation Force 60 N ± 20 N 6 Output Signals DFP VO DFP C A 7 Release signal* DFP VO VO8 = 0.5... 4.5V ± 0.1V (output 1) 4.5... 0.5V ± 0.1V (output 2) 2.5 V ± 0.2 V (neutral) J19 = SAE J1939 00 = no function D0 = active at zero position (2 x low) N = not available DFP C A 8 Lever Cover N = no logo (standard version) C = customized logo * recommended 20kΩ pullup to 5V For more technical details and drawings see overleaf. 5 6 7 60 VO8 D0 8 N

DFP VO (voltage output) PIN 1 2 3 4 5 6 7 8 ASSIGNMENT Analog Output 1 Free Ubat GND Analog Output 2 Free Release Signal 2 Release Signal 1

Output switch signal DFP VO Output Voltage 4,5V Output 1 2,5V 0,5V E2 (front) S1 (zero/start position E1 (rear) 0,7V Output 2 (switching point of release signals) Pedal deflection Release 1 Release 2 Release signal Sensor 1 Output 1 Release 1 Sensor 2 Output 2 Release 2

DFP CA (CAN) PIN 1 2 3 4 ASSIGNMENT CAN high CAN low +24 V GND

DeltaTech Controls A CoActive Technologies Company - worldwide Facilities With sales offices and manufacturing facilities located worldwide, please visit our website at for a complete listing and to find the office nearest to you. Germany Headquarter Holzhauser Strasse 26-32 D-13509 Berlin Germany phone: + 49 30 43 999 0 fax: + 49 30 43 999 203 Mail: sales.dtc.europe@coactive-tech.com USA 5288 Valley Industrial Blvd. S Shakopee, MN 55379 USA phone: + 1 952 403 7400 fax: + 1 952 233 9707 Mail: sales.dtc.americas@coactive-tech.com China 3rd F. North Building No. 239 Gangao Rd. W.G.Q.FTZ. Pudong Shanghai. 200131 China phone: + 86 13810247876 fax: +86 21 3393 8281 Mail: sales.dtc.asia@coactive-tech.com France 2 Boulevard Michaël Faraday Arlington Square, Bâtiment B Serris F 77716 Marne-La Vallée Cedex 4 France phone: + 33 160 24 51 51 fax: + 33 3 84 69 08 97 Mail: sales.dtc.europe@coactive-tech.com Japan 9F, Ariake Frontier Building B 3-1-25 Ariake, Koto-ku, Tokyo 135-0063 Japan phone: + 81 3 5530 9365 fax: + 81 3 5530 8737 Mail: sales.dtc.asia@coactive-tech.com Korea Room #503, TaeSung Building, 265-5, SeoHyun - Dong, PuDang - Gu, SeonNam - Si, GyeonGi - Do, Korea 463-050 phone: + 82 32 704 0347 fax: + 82 32 704 0348 Mail: sales.dtc.asia@coactive-tech.com No information and data contained in this publication shall be construed to create any liability on the part of DeltaTech Controls GmbH. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. Dimensions are subject to change without prior notice. All Copyrights belong to DeltaTech Controls GmbH and CoActive Technologies. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice. 2010