INET HRWRE
lphabetical Index ESRIPTION PGE ESRIPTION PGE LL ERING SSEMLIES ERINGS OLT, SEURITY RKETS, HNLE UMPERS SH OXES, SH RWERS THES RHOLER-PULL ONVE ERINGS OOR GUIES OOR STOP RWER SSEMLY RWER OTTOM PLTES RWER RKETS RWER FRONTS RWER PNS RWER SLIES RWER SPERS G30 G27 - G30 G14 G5 G26 G24 G15, G16 G9 G29 G31 G31 G23 G23 G25 G25 G22 G17 - G21 G23 H ONELE INET HINGES ONELE PIVOT HINGES LTH HINGES UTT HINGES PIVOT HINGES LIFT-OFF HINGES K KNOS L LTHES LOKS O OVERHE TRK OMPONENTS P PLE LTHES PULL/PUSH PLTES PULLS PULLEY G12 G12 G12 G12 G12 G11 G5 G8 - G11 G13 - G14 G31 G8 G2 G6, G7, G9 G30 F FLT ERINGS G28 R RUER TIRE ERINGS G29 G GR RS GROMMETS GUIE PINS H HNLE RKETS HNLES OOR HNLES HN RILS HSP & STPLE HINGES ONTINUOUS HINGES G3 G26 G31 G5 G2, G4 - G6, G9 G2 G3 G9 G10 - G12 G10 S SHEVES SLIING OOR OMPONENTS STU, FEMLE SUPPORTS, HNLE T THUMSREW FSTENER W WHEELS G31 G31 G7 G5 G6 G30 ll photographs and illustrations are considered to be a representation of the actual item. In some cases there may be slight variations. This catalog, copy, part numbers and unique method of illustrating products is copyrighted by omponent Hardware Group, Inc. ll rights reserved. No portion of this catalog may be reproduced in any form or by any means in whole or in part, without the written consent of omponent Hardware. omponent Hardware Group reserves the right to make any and all changes and to discontinue any of its products without notice. Not responsible for typographical errors. *May not be identical to competitors products. OPYRIGHT 2017 OMPONENT HRWRE GROUP, IN. #T-X027 10/17 PRINTE IN U.S..
Member Organizations omponent Hardware Group is a proud member of the following organizations Products shown in this catalog may be listed and/or certified by one or more of the following regulatory agencies and will be designated by the following marks US FM PPROVE
oor Handles & Pull/Push Plates SaniGrasp OOR HNLE Heavy uty onstruction Mounting Hardware Included Full ngled Tubular Pull for Opening Ease with the Forearm Hole Patterns to Match Most Standard oor Push-Pull Plates Make Retro-Fit Easy Provided with SNIGUR ntimicrobial Product Protection Eliminates the Need to Use Your Hand to Open Restroom oor fter Washing Your Hands and ompliant 4 (102mm) model no. SG-101 7- (191mm) 3 (76mm) PULL/PUSH PLTES ll Stainless Steel onstruction Retro-fits to most common push/pull plate hole-patterns SNIGUR treatment inhibits the growth of bacteria, molds and fungi, which can cause odors, staining and product deterioration and ELIMINTES fingerprints SNIGUR product protection will last for the useful life of the product 6 HOLES model no. P75-1000-Q model no. P75-4000 model no. P75-5000 7- (191mm) TUING 6 HOLES 16 (406mm) 16 (406mm) 10 (254mm) 7- (191mm) 7- (191mm) 7- (191mm) 16 (406mm) 7- (191mm) 1-3/4 (45mm) 4 (102mm) 3 (76mm) 4 (102mm) 2- (63.5mm) 3 (76mm) 4 (102mm) NOTE: SNIGUR PROUT PROTETION IS ESIGNE TO KEEP THE PROUT FRESHER N LENER ETWEEN NORML LENING ROUTINES. IT IS NOT ISINFETNT N WILL NOT PROTET USERS OR OTHERS GINST FOO-ORNE ILLNESS OR ISESE. LWYS USE GOO HYGIENE N LENING PRTIES. G2 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Grab ars GR RS N hand RILS REF. REF. REF. SMOOTH FINISH GR R KNURLE FINISH GR R PRISON NTI-LIGTURE GR R MOEL NO. IMENSION MOEL NO. IMENSION MOEL NO. IMENSION GS15-1112-Q 12 (305mm) GS15-4112-Q 12 (305mm) GS15-1112-QP 12 (305mm) GS15-1116-Q 16 (406mm) GS15-4116-Q 16 (406mm) GS15-1116-QP 16 (406mm) GS15-1118-Q 18 (457mm) GS15-4118-Q 18 (457mm) GS15-1118-QP 18 (457mm) GS15-1124-Q 24 (610mm) GS15-4124-Q 24 (610mm) GS15-1124-QP 24 (610mm) GS15-1130-Q 30 (762mm) GS15-4130-Q 30 (762mm) GS15-1130-QP 30 (762mm) GS15-1132-Q 32 (813mm) GS15-4132-Q 32 (813mm) GS15-1132-QP 32 (813mm) GS15-1136-Q 36 (914mm) GS15-4136-Q 36 (914mm) GS15-1136-QP 36 (914mm) GS15-1142-Q 42 (1067mm) GS15-4142-Q 42 (1067mm) GS15-1142-QP 42 (1067mm) GS15-1148-Q 48 (1219mm) GS15-4148-Q 48 (1219mm) GS15-1148-QP 48 (1219mm) 3- (88.9mm) KNURLE FINISH 3- (88.9mm) 3- (88.9mm) 120 TYP 3 (77.5mm) (3) 0.25 HOLES EQULLY SPE ON 2.50 OLT IRLE FOR (3) S/S #10 PHILIPS PHS X 1-3/4" LG. 120 TYP 120 TYP 3 (77.5mm) (3) 0.25 HOLES EQULLY SPE ON 2.50 OLT IRLE FOR (3) S/S #10 PHILIPS PHS X 1 3/4" LG. 120 TYP 120 TYP 3 (77.5mm) (3) 0.25 HOLES EQULLY SPE ON 2.50 OLT IRLE FOR (3) S/S #10 PHILIPS PHS X 1-3/4" LG. 120 TYP (R1.25) (R1.25) (R1.25) LENGTH LENGTH LENGTH REF. SMOOTH L-SHPE GR R MOEL NO. IMENSION GS15-113030Q 30 x 30 (762mm x 762mm) 40 x 30 (1017mm x 762mm) KNURLE L-SHPE GR R MOEL NO. IMENSION GS15-413030Q GS15-414030Q 30 x 30 (762mm x 762mm) 40 x 30 (1017mm x 762mm) 30 (762mm) 5/8 5/8 30 (762mm) Stainless steel, 1- diameter grab bars. vailable in smooth or knurled finish, complete with concealed mounting flange and press-on flange cover. ll grab bars are permanently coated with SNIGUR treatment. NOTE: SNIGUR PROUT PROTETION IS ESIGNE TO KEEP THE PROUT FRESHER N LENER ETWEEN NORML LENING ROUTINES. IT IS NOT ISINFETNT N WILL NOT PROTET USERS OR OTHERS GINST FOO-ORNE ILLNESS OR ISESE. LWYS USE GOO HYGIENE N LENING PRTIES. *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G3
Handles REF. O.. LENGTH handles REF. SULPTURE HNLES featuring... SOLI METL STING POLISHE HROME FINISH FRONT or RER FSTENING TWO LENGTHS VILLE OMPONENT 1-13/32 (36mm) REF. 1-7/16 (37mm) (22mm) O.. LENGTH O.. MOUNTING IM model no. o.a. length a dim. b dim. P48-1010 14-5/8 (371mm) 13-7/16 (340mm) 12-7/16 (316mm) P48-1012 12-13/16 (325mm) 11-5/8 (295mm) 10-5/8 (270mm) NOTES: IMENSION REPRESENTS HOLE ENTERS FOR FRONT MOUNTING #10 SREWS. IMENSION REPRESENTS THREE HOLE ENTERS TO REEIVE 1/4-20 SREWS FOR RER MOUNTING. EORTIVE TRIM INSERTS RE SUPPLIE TO ONEL FRONT MOUNTING SREWS. EXTR TRIM INSERTS RE VILLE N MY E ORERE S MOEL NO. P48-X002. REF. EORTIVE HNLES featuring... UL MOUNTING...FRONT OR RER TWO STNR LENGTHS VILLE HET RESISTNT HEVY UTY ONSTRUTION NOIZE LUMINUM HNLE with NYLON SUPPORTS model no. o.a. length o.. MOUNTING IM. P49-1500-6 7-11/16 (195mm) 6 (152mm) P49-1500 12- (311mm) 10-5/8 (270mm) NOTES: PRE-SSEMLE HNLES WILL EPT SREWS FOR FRONT MOUNTING. INTERNL RSS USHINGS EPT STNR 1/4-20 MHINE SREWS FOR RER FSTENING. PRESSURE SENSITIVE LK VINYL INSERT ONELS SREW HOLES. OTHER LENGTHS VILLE UPON PPLITION ON QUNTITY ORERS. G4 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Handles & Knobs E HNLES & KNOS REF. HNLE RKETS Heavy-uty Nylon Fiberglass Reinforced End rackets (pr.) and enter Support racket (ea.) Ideal for mobile carts. oncealed mounting feature. Front or rear mount. Temperature range to 300 F (149 ). MOEL NO. P49-2100 EN RKET (PIR) MOEL NO. P49-2200 ENTER SUPPORT RKET (EH) REF. HEVY- UTY TUULR HNLES Stainless Steel, Satin Finish MOEL NO. P47-1012 12- (327mm) O.. 12 (305mm ) O.. MOEL NO. P47-1018 18- (479mm) O.. 18 (457mm) O.. MTERIL: (22mm) O.. STINLESS STEEL FORME TUING 1/4-20 TH 2-5/8 (67mm) O.. PHENOLI STN-OFFS PROVIE OMPONENT O.. 1- (38mm) REF. E 1-7/32 (31mm) OMPONENT O.. TUING SUPPLIE Y USTOMER. TUING LENGTH IS () MINUS 1-9/16 (39mm) HROME PLTE KNOS LL KNOS TPPE TO REEIVE #8-32 SREWS. 1-13/16 (46mm) ENTERLINES OF MOUNTING HOLES () MOUNTING HOLES FOR OR M10 HRWRE 3/4 (19mm) 2-1 (75mm) 1-13/32 (36mm) P80-3000 (22mm) REF. OFFSET HNLE hrome Plated MOEL NO. P40-1010 MTERIL: HROME PLTE IE ST METL 11/16 (17mm) 5 (127mm) O.. 1- (38mm) 6-1/8 (155mm) O.. 1-3/4 (44mm) P80-3020 P80-3030 5/8 OMPONENT 1/4-20 TH REF. 2- (63mm) HNLE SUPPORTS luminum for O.. Tubing EH SUPPORT IS TPPE TO REEIVE (2) 1/4-20 SREWS MOEL NO. P49-1010 (ONE PIR) MTERIL: IE ST LUMINUM WITH STIN TEXTURE FINISH 1- (32mm) 2 (51mm) 1- (48mm) OMPONENT 5/8 7/16 (11mm) 5/8 *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G5
Pulls G E H PULLS REF. HNLE REF. PULLS REF. WIRE PULLS lack Nylon Fiberglass Reinforced ie ast or Nylon Satin hrome Finish with Solid rass Tapped Inserts IEL FOR HETE INETS. RTE TO 300 F (149 TEMPERTURE). FULL 1- GRIP LERNE MOEL NO. P50-1010 P50-1011 MTERIL IE ST IE ST FINISH POLISHE HROME UFFE STIN MOEL NO. P45-3000 P45-3500 3 (76mm) 3- (89mm) model no. p53-1012 1- (35mm) 5-5/8 (143mm) #10-24 x 5/16 deep 5 (127mm) F 1-5/8 (41mm) P52-1010* NYLON GLOSS LK *FURNISHE WITH THREE RSS INSERTS 13/16 (20mm) #10-24 THRES 4 (102mm) O.. 1 (24mm) 5/8 #8-32.40 EEP I P45-4000 4 (102mm) 1.3 (32mm) I. 4-3/4 (120mm) OMPONENT OMPONENT REF. PULLS REF. E REF. F luminum lloy Satin Finish MOEL NO. P44-1010 13/16 (20mm) #8-32 THRES 4 (102mm) O.. 4-5/8 (117mm) OMPONENT THUMSREW FSTENER Stainless Steel MOEL NO. P51-1024 USE TO MEET NSF REQUIREMENTS WHERE HNLES & PULLS MUST E FSTENE OR REMOVE WITHOUT THE USE OF TOOLS (9mm) #10-24 PULLS ie ast...hrome Plated MOEL NO. P51-1010 5/8 #8-32 THRES 2-3/4 (70mm)O.. 3 (76mm) 3-1 (100mm) 3/4 (19mm) OMPONENT REF. G LUMINUM PULL Satin nodized FULL 1- GRIP LERNE MOEL NO. P44-5000 1- (38mm) 2 (51mm) REF. H, I WG. REF REF. I MOEL NO. P46-1010 R PULLS, Stainless Steel...Satin Finish MTERIL: THIK SOLI STINLESS STEEL REF. H MOEL NO. P46-1012 5 (127mm) O.. 4 (102mm) O.. #8-32 THRES OMPONENT 1/4-20 x 5/8 EEP 4- (108mm) 5- (133mm) 4-3/4 (121mm) 5- (133mm) 4- (108mm) 1- (32mm) 1- (32mm) E 5/8 5/8 E G6 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Recessed Pulls OMPONENT E OOR PULL Stainless Steel with Frame eveled Edge MOEL NO. P62-1010 RETINING LOKNUTS PROVIE 4-3/4 (120mm) 2-7/16 (62mm) REESSE PULLS REF. REF. REF. 1-3/4 (44mm) 1-3/4 (44mm) OOR PULL Stainless Steel Flush Type for Welding MOEL NO. P62-1014 4-3/4 (120mm) 2-7/16 (62mm) 1-3/4 (44mm) RWER PULL Stainless Steel Full Grip Type with Frame eveled Edge MOEL NO. P63-1012 RETINING LOKNUTS PROVIE 4-13/16 (122mm) I. 2-7/16 (62mm) 5/8 #10-24 x TH STUS 4 (102mm) 3- (89mm) 5/8 3- (89mm) 5/8 #10-24 x TH STUS 4 (102mm) 3- (89mm) REF. REESSE OOR pull lack S Thermoplastic Shock Resistant Snap-in Style ONE PIEE ONSTRUTION FOR FST, EFFIIENT INSTLLTION MOEL NO. E F P73-1000 P73-2000 5 (127mm) 7 (178mm) 5-7/16 (138mm) 7-7/16 (189mm) 1- (33mm) 1-7/16 (37mm) 1-3/4 (44mm) 1-9/16 (40mm) 2-1/16 (52mm) 5/8 (22mm) FEMLE STU onverts Male Stud To Female IEL FOR USE ON WOO INETS REF. E round pull Stainless Steel with eveled Edge Mount MOEL NO. P60-1010 RETINING LOKNUTS PROVIE 4-13/16 (122mm) I. (3) #10-24 x TH STUS EQULLY SPE ON 4 (102mm) I. F E #10-24 TH X 5/8 LG. MOEL NO. P50-5000 4-11/16 (119mm) I. 3- (89mm) 9/16 (14mm) 5/8 *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G7
Heavy uty Stainless Steel Slide & Paddle Latches HEVY- UTY STINLESS STEEL PLE LTHES RUSHE STINLESS STEEL FINISH RUGGE LL STINLESS ONSTRUTION LLOWS FOR LEN, FLUSH MOUNTING ONVENIENT SIZE LTHES OFFER WIE RNGE OF PPLITION EONOMILLY PRIE UNIQUE RER MOUNTING RKET PROVIES FST INSTLLTION IEL FOR MOILE RTS N ESS OORS WHERE ONVENTIONL SURFE MOUNTE HRWRE IS INPPROPRITE REF. MOEL NO. P90-5000- WITH LOK MOEL NO. P90-5000 W/O LOK REF. MOEL NO. P90-2000- WITH LOK MOEL NO. P90-2000 W/O LOK I E 7/16 (11mm) MX 1/32 (1mm) MIN F G REF. MOEL NO. P91-5000 REF. 3/4 (19mm) 3-3/4 (95mm) 4-3/4 (121mm) 3 (76mm) MOEL NO. P90-1000 9/16 (14mm) 2-3/16 (55mm) 1-5/8 (41mm) TRVEL 1-5/8 (41mm) 3- (84mm) #10-24 STU (22mm) 13/32 SLIE MTG KIT H LTH SS Y 2-5/8 (66mm) 1 (24mm) REF. MOEL NO. E F G H I P90-5000 P90-5000- P90-2000 P90-2000- 4- (124mm) 3- (84mm) 3- (98mm) 2-11/16 (68mm) 5- (137mm) 3-5/8 (92mm) 1-5/32 (29mm) 3/4 (19mm) 1-1/32 (26mm) 3/4 (19mm) 1-29/32 (48mm) 1-13/32 (36mm).63.048 (2mm) 7/16 (11mm) (11mm) 9/16 (14mm).036 (1mm) SLIE RETINING RKET SREW LTH SSEMLY G8 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Pulls & atches E F PULLS & THES REF. HSP & STPLE, Stainless Steel REF. RHOLER & PULL, Stainless Steel REF. LINK-LOKING LTH, Stainless Steel 1-7/16 (36mm) 1 (23mm) MOEL NO. M80-2500 2- x x.072 (63mm x 25mm x 2mm) MOEL NO. P88-1010 OVERLL SIZE: 2-1 x 1- (74mm x 33mm) R SIZE: 2-1/8 X 1-1/8 (54mm x 28mm) MOEL NO. M11-8201 HEIGHT: 2- (57mm) WITH: 1-7/16 (36mm) PROFILE: (12mm) PULL OWN PRESSURE: 90 lbs (41kg) LO PITY: 300 lbs (136kg) 2- (57mm) 2-1/32 (51mm) REF. REF. F Heavy uty, STRIGHT K ROP HNLE, Stainless Steel 1-3/4 (44mm) RWER-TITE TION THES Stainless Steel MOEL NO. LENGTH WITH HOLES M10-8332 M10-8333 3- (86mm) 1- (32mm) 4 (102mm) 2- (57mm) 3- (86mm) 2-3/4 (70mm) 1- (32mm) 9/16 (14mm) MOEL NO. P68-1010.132 (3mm).195 (5mm) REF. E STRIGHT K ROP HNLE, Stainless Steel 2- (57mm) 3- (89mm) 1- (32mm) 3- (86mm) M10-8333 9/16 M10-8332 (15mm) 13/64 (5mm) 1- (32mm) 3- (91mm) 9/64 (4mm) 1 (24mm) MOEL NO. P70-1010 17/32 (14mm) 1- (35mm) 2- (57mm) *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G9
abinet Latches & ontinuous Hinges REF. cabinet latches, handles latches & continuous hinges INET LTHES PROVIE WITH FLUSH, 1/8 (3mm) and KEEPERS HROME PLTE IE ST ZMK 1-1/8 (29mm) 9/32 (7mm) STNR UTY Mounting holes Ø.150 Thru with Ø.279 X 82 SK Total 6 mounting holes Mounting holes to suit #6 Flat Head Screw MOEL NO. M15-9210 11/32 (9mm) 11/16 (17mm) 3/16 (5mm) 11/16 (17mm) 1- (38mm) 1-13/16 (46mm) (22mm) 1- (38mm) OMPONENT REF. ONTINUOUS HINGE Stainless Steel with STINLESS STEEL PIN MOEL NO. WITH LENGTH GUGE PIN I. M48-0112 M48-0121 M48-0122 M48-0131 M48-0132 M48-0142 M48-0143 M48-0144 M48-0154 M48-0134 3/4 (19mm) 1-1/16 (27mm) 1-1/16 (27mm) 1- (38mm) 1- (38mm) 2 (51mm) 2 (51mm) 2 (51mm) 2- (64mm) 1- (38mm) 72 (1829mm) 72 (1829mm) 72 (1829mm) 72 (1829mm) 72 (1829mm) 72 (1829mm) 72 (1829mm) 72 (1829mm) 72 (1829mm) 72 (1829mm).035 (0.9mm).035 (0.9mm).040 (1.0mm).035 (0.9mm).040 (1.0mm).040 (1.0mm).050 (1.3mm).060 (1.5mm).060 (1.6mm).060 (1.6mm).086 (2.2mm).086 (2.2mm).086 (2mm).090 (2.3mm).090 (2.3mm).120 (3mm).120 (3mm).120 (3mm).187 (4.8mm).125 (3.2mm) NOTE: HINGE FURNISHE WITHOUT HOLES. OTHER SIZES VILLE UPON REQUEST. 1-13/32 (36mm) 1- (48mm) WITH (22mm) 1- (48mm) 2- (59mm) HEVY UTY Mounting holes Ø.177 Thru with Ø.332 X 82 SK Total 6 mounting holes Mounting holes to suit #8 Flat Head Screw MOEL NO. M15-9211 G10 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
THREE POINT LTH Stainless Steel Latches & Hinges, Lift-Off ll stainless steel construction Positive dead bolt locking Holds door closed in 3 places-top, center, & bottom to minimize leakage and save energy Strongest latch made Spring loaded over-center latching Positive inside release mechanism MOEL NO. W37-3000-SS 8-3/4 (222mm) 4-13/16 (122mm) 1-13/16 (46mm) 3 (76mm) 2 (51mm) 5/8 SQURE OPEN 2- (57mm) 8- (210mm) 2- (60mm) 1- (35mm) 7- (187mm) 2-9/16 (65mm) LENGTH RIGHT HN HINGE ILLUSTRTE LIFT-OFF HINGES LIFT-OFF FLG HINGE, Stainless Steel MOEL NO. LENGTH OPEN GUGE PIN I. HN R74-8000-RH R74-8001-LH R74-8100-RH R74-8101-LH R74-9000-RH R74-9001-LH 2 (51mm) 2 (51mm) 3 (76mm 3 (76mm) 2 (51mm) 2 (51mm) 1-3/4 (44mm) 1-3/4 (44mm) 2 (51mm) 2 (51mm) 1- (32mm) 1- (32mm).075 (2mm).075 (2mm).075 (2mm).075 (2mm).060 (1.6mm).060 (1.6mm) 3/16 (5mm) 3/16 (5mm) 3/16 (5mm) 3/16 (5mm) 1/8 (3mm) 1/8 (3mm) NOTES: LL HINGES RE FURNISHE WITHOUT HOLES OMPONENT R.H. L.H. R.H. L.H. R.H L.H. LIFT-OFF FLG HINGE SWEGE KNUKLE NON-HNE STINLESS STEEL and NYLON ERING ELIMINTES MORTISING OF OOR OR JM MINIMUM OOR LERNE REQUIRE STNR UTY MOEL NO. M75-1002 2-1/16 (52mm) LG. x 1-3/32 (28mm) x.075 (2mm) 3/16 (5mm) PIN I. HEVY UTY MOEL NO. M75-5003 3 (76mm) LG. x 1- (35mm) x.075 (2mm) PIN I. OMPONENT TOP VIEW LENGTH *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G11
Hinges hinges REF. ONELE PIVOT HINGES Stainless Steel Oblong mounting holes for easy door adjustment Self-lubricating bronze pivot bushing Removable Pivot Pin allows door to be removed without disassembling entire bracket Supplied as a set...reversible for left or right-handed doors REPLES* KSON #1510/11 N #1530/31 WITH KEIL QULITY HRWRE REF. RIGHT HN LTH HINGES Stainless Steel LEFT HN MOELS VILLE ON PPLITION TO ORER, SUFFIX -LH MOEL NO. R76-1000 1- (35mm) 1-3/4 (44mm) MOEL NO. GUGE PIVOT HINGE M12-9293 1- (35mm) 5/32 (4mm) 3/4 (19mm).040 (.1mm) (22mm) PIN USHING (22mm) 2- (73mm) 1-3/16 (30mm) M12-9294 M12-9295 2 (51mm) 2-3/4 (70mm) 3/16 (5mm) (22mm).050 (1mm).062 (2mm) LOK WSHER MOUNTING HOLES FOR #10 PHMS (2) REF. UTT HINGES Stainless Steel MOEL NO. M74-2078 2 (51mm) LG. x 2 (51mm) OPEN x 14 ga (2mm).187 (5mm) PIN I. MOEL NO. M74-3078 3 (76mm) LG. x 3 (76mm) OPEN x 14 ga (2mm).187 (5mm) PIN I. NOTE: HINGES RE FURNISHE WITHOUT HOLES. REF. SMLL OFFSET MOEL NO. R75-6661 7/16 (11mm) 3/4 (19mm) OOR RKT JM RKT 3- (84mm) PIVOT HINGES Nickel Plated Steel 1- (33mm) 3 (76mm) SK & HOLE FOR #10 OR M5 LRGE OFFSET MOEL NO. R75-6662 3/4 (19mm) 11/16 (17mm) 3- (84mm) 1-5/8 (41mm) SIE VIEW 1- (47mm) G12 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Locks LOKS UTILITY LOKS Stainless Steel Faced IS TUMLER FOUR RREL LENGTHS VILLE PERMITS MTERIL THIKNESS TO 1-3/16 (30mm) KEY REMOVLE IN LOKE OR UNLOKE POSITION FURNISHE WITH TWO KEYS MOEL NO. KEYING P30-4750 9/32 (7mm) 5/8 (22mm) LIKE P30-4751 9/32 (7mm) 5/8 (22mm) IFFERENT P30-4752 9/32 (7mm) 5/8 (22mm) IFFERENT & MSTER KEYE P30-4760 11/16 (17mm) (22mm) 1-1/8 (28mm) LIKE P30-4761 11/16 (17mm) (22mm) 1-1/8 (28mm) IFFERENT P30-4762 11/16 (17mm) (22mm) 1-1/8 (28mm) IFFERENT & MSTER KEYE P30-4770 1 (24mm) 1-1/8 (28mm) 1- (35mm) LIKE P30-4771 1 (24mm) 1-1/8 (28mm) 1- (35mm) IFFERENT P30-4772 1 (24mm) 1-1/8 (28mm) 1- (35mm) IFFERENT & MSTER KEYE P30-4780 1-1/8 (28mm) 1- (35mm) 1-5/8 (41mm) LIKE P30-4781 1-1/8 (28mm) 1- (35mm) 1-5/8 (41mm) different TO ORER ITIONL KEYS (KEYE-LIKE-TYPE 802) USE MOEL NO. P30-0802 TO ORER MSTER KEYS USE MOEL NO. P30-1000 NOTE: MS OPERTE IN 180 SEMI-IRLE. 90 OPERTING MS VILLE UPON PPLITION (LSO VILLE S KEYE LIKE IN SERIES). SPUR WSHERS FOR WOO RWERS VILLE ON SPEIL ORER. (22mm) MX 0.85 (.2mm) 1- (38mm).635 TYPIL YLINER HOLE IMENSIONS.760 (19mm) I. 5/8 *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G13
Locks REF. T-OLT LOK Stainless Steel Faced FIVE IS TUMLER for hollow metal drawers and foamed in place doors heavy-duty vertical dead bolt removable for installation FURNISHE WITH TWO RSS KEYS MOEL NO. P11-0480 LOKS REF. SLIING OOR LOK djustable POLISHE HROME FINISH TMPERPROOF FOR GLSS OORS UP TO 11/16 (17mm) THIK WOO, WOO FRME, OR METL OORS UP TO THIK RTHET R IS TIGHTENE IN POSITION WITH THUMSREW MOEL NO. P22-0006 THROW 29/32 (23mm) 37/64 (15mm) 11/64 (4mm) 27/32 (21mm) 25/32 (20mm) 1-13/32 (36mm) 5/8.760 (19mm) I. 1-1/16 (27mm) 1-1/16 (27mm) (22mm) 5/8 4- (111mm) 3/4 (19mm) 9/32 (7mm) MX 13/16 (21mm) TYPIL YLINER HOLE IMENSIONS 13/16 (21mm) REF. RWER LOK ESY TO INSTLL FIVE IS TUMLER NON FERROUS STIN RSS RREL N SE FURNISHE WITH TWO RSS KEYS 5/8 MOEL NO. P10-0370 11/32 (9mm) (22mm) REF. PLUNGER LOK NIKEL PLTE FIVE IS TUMLER FOR YPSSING OORS PPROX. 3/4 (19mm) THIK N OVER SUPPLIE WITH ESY TO INSTLL PUSH-IN OLT REEIVER LOKING YLINER NNOT E REMOVE FROM HOUSING WITHOUT KEY (22mm) MOEL NO. P20-0490 1-1/16 (27mm) 3/32 (2mm) 7/16 (11mm) SUNK FOR #6 SREWS 1-7/16 (36mm) 2 (51mm) 1- (38mm) 3/4 (19mm) (22mm) 5/32 (4mm) 2 (51mm) 1- (39mm) SUNK FOR #10 SREWS (22mm) (9mm) G14 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Magnetic atches F E magnetic catches REF. INET TH Magnetic HEVY UTY OULE MGNET MOEL NO. M32-2401 MTERIL: LUMINUM WITH ONELE MGNETS 30 lbs (13.6 kg) PULL 3-1/8 (79mm) 11/16 (17mm) 9/16 (14mm) 3-1/8 (79mm) REF. INET TH Magnetic SINGLE MGNET MOEL NO. M30-2400 SIZE: 2 x 1-1/16 X (51mm x 27mm x 13mm) 12 lbs (5 kg) PULL OULE MGNET MOEL NO. M30-5920 SIZE: 2 x 1-1/16 x 3/4 (51mm x 27mm x 19mm) 20 lbs (9 kg) PULL 5/8 LG. SLOT FOR #6 SREW 1-5/8 (41mm) 5/8 3/4 (19mm) 2 (50mm) REF. REF. REF. E REF. F INET TH Magnetic, Snap-In Type INET TH Magnetic, Snap-In Type INET TH Magnetic, Snap-In Type INET TH Magnetic, oncealed Type 2- (58mm) 2- (58mm) 1- (33mm) 2-3/4 (70mm) 2- (59mm) 7/16 (11mm) 13/16 (20mm) (22mm) 13/16 (20mm) NOTE: MTG. SURFE REQUIRES (22mm) I. HOLE SINGLE TH MGNET MOEL NO. M35-1000 14 lbs (6kg) PULL (STEEL KING PLTE REQUIRE) MOEL NO. M36-0201 MTERIL: LK POLYPROPYLENE WITH ONELE MGNETS 12 lbs (5kg) PULL MOEL NO. M36-0801 MTERIL: LK POLYPROPYLENE WITH ONELE MGNETS 30 lbs (13kg) PULL MOEL NO. M36-0611 MTERIL: LK POLYPROPYLENE WITH ONELE MGNETS 13 lbs (6kg) PULL FURNISHE S SET OF TWO WITH TTRTING POLRITY FOR STRONGER PULL MOEL NO. M35-2000 MTERIL: ZIN PLTE STEEL WITH ONELE MGNETS 18 lbs (8kg) PULL *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G15
Mechanical atches F E G OOR TH Heavy-uty JUSTLE TENSION MEHNIL THES REF. REF. REF. REF. OOR TH Heavy uty, 4 Way* with JUSTLE SPRING LOE LL TENSION 3/4 (19mm) OOR TH Standard uty with JUSTLE SPRING LOE LL TENSION OOR TH Friction Type with SPRING STEEL TION 3 (76mm) 2- (63mm) MTG. HOLES 1-3/4 1- (44mm) (32mm) 1-7/16 (36mm) 2- (60mm) 1-1 (33mm) 1- (38mm) 11/16 (17mm) 7/16 (11mm) 9/64 (4mm) MTG. HOLES 7/16 (11mm) 9/32 (7mm) MOEL NO. M27-2490 8 lbs (3.6kg) PULL SIZE: X 4 (25mm x 102mm) MTERIL: STEEL, NIKEL PLTE MOEL NO. M22-2430 MTERIL: SOLI RSS WITH STIN NIKEL FINISH N STINLESS STEEL LLS *TH MY E USE FOR MORTISE OR SURFE MOUNT PPLITION MOEL NO. M22-2420 MTERIL: SOLI RSS WITH STIN NIKEL FINISH STINLESS STEEL LLS N SPRINGS MOEL NO. M20-2590 MTERIL: ZIN PLTE SPRING STEEL REF. E REF. F REF. G ULLET THES with FIXE TENSION SURFE OX TH with SPRING LOE NYLON ROLLER 1.13 (29mm) INET TH Friction Type with SPRING TION NYLON ROLLERS 1-1/16 (27mm) MOEL NO. M25-9469 SIZE: X 7/16 (10mm x 11mm) I. x LENGTH MTERIL: STEEL, NIKEL PLTE FURNISHE WITH STRIKE.79 (20mm) MOEL NO. M24-2260 MTERIL: ZIN PLTE STEEL.58 (15mm) 1- (32mm) MOEL NO. M21-2580 MTERIL: ZIN PLTE STEEL 1-3/16 (30mm) G16 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
rawer Slides OMPONENT Fully welded end plates with rubber bumber stops RWER SLIES, EXTR HEVY -UTY S52 SERIES NSF LISTE STINLESS STEEL FULL EXTENSION 200 lbs (100 kg) LO PITY SLIES N ROLLERS ESILY REMOVE INLUES 8 LL ERING SSEMLIES RETINER PLTES...KEEPS SLIES IN POSITION EVEN WHEN RWERS RE REMOVE FULLY WELE STOPS 3/4 (19mm) 5/64 (2mm) specifications MOUNTING SPE REQUIRE HEIGHT RWER EXTENSION LO PITY material TION NOTE: LO RTING SE ON 20 (500mm) SLIE LENGTH PKGE 6 PIR PER RTON SIE 25/32 (20mm) 2-7/16 (62mm) full travel 200 lbs (100kg) per pair with stainless steel bearings 150 lbs (68kg) per pair with elrin bearings 14 ga (2mm) stainless steel SOLI elrin or stainless steel ball bearing wheels WITH removable stainless steel screws 2-7/16 (62mm) INET SIE 1/64 (4mm) RWER SIE 1- (31mm) S52 SERIES STINLESS STEEL FULL EXTENSION RWER SLIES WITH STINLESS STEEL ERINGS MOEL NO. SIZE S52-0020 20 (508mm) S52-0022 22 (559mm) S52-0024 24 (610mm) S52-0026 26 (660mm) S52 SERIES STINLESS STEEL FULL EXTENSION RWER SLIES WITH ELRIN ERINGS MOEL NO. SIZE S52-2020 20 (508mm) S52-2022 22 (559mm) S52-2024 24 (610mm) S52-2026 26 (660mm) NOTE: OTH MOELS RE FURNISHE WITH REMOVLE STINLESS STEEL THREE FSTENERS ROSS SETION WHEN ORERING...MESURE FROM INSIE FE TO EXTREME RER OF RWER NOTE: STINLESS STEEL LL ERING SSEMLIES W/REMOVLE STINLESS STEEL THREE FSTENERS (MOEL NO. S52-X001) N ELRIN ERING OMPLETE W/REMOVLE STINLESS STEEL THREE FSTENERS (MOEL NO. S52-X101) MY E ORERE SEPRTELY...SEE PGE G30 *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G17
rawer Slides OMPONENT S26 STINLESS STEEL SERIES NSF LISTE STINLESS STEEL FULL EXTENSION 100 lbs (50kg) LO PITY ESY INSTLLTION SLIES & ROLLERS ESILY REMOVE FOR LENING INLUES (8) S/S LL ERING SSEMLIES RETINER PLTES...KEEPS SLIES IN POSITION EVEN WHEN RWERS RE REMOVE POSITIVE STOPS SPEIFITIONS MOUNTING SPE REQUIRE HEIGHT RWER EXTENSION LO PITY TION SIE 5/8 (15mm) 1-27/32 (21mm) full travel 100 lbs (45kg) per pair STINLESS steel ball bearing WHEELS with removable STINLESS steel screws NOTE: LO RTING SE ON 20 (508mm) SLIE LENGTH PKGE 10 PIR PER RTON S10 EONOMIL SERIES NSF LISTE EONOMIL ZIN PLTE STEEL FULL EXTENSION 100 lbs (50kg) LO PITY ESY INSTLLTION SLIES & ROLLERS ESILY REMOVE FOR LENING INLUES (8) LL ERING SSEMLIES RETINER PLTES...KEEPS SLIES IN POSITION EVEN WHEN RWERS RE REMOVE POSITIVE STOPS SPEIFITIONS MOUNTING SPE REQUIRE HEIGHT RWER EXTENSION LO PITY MTERIL TION SIE 5/8 (15mm) 1-27/32 (21mm) full travel 100 lbs (45kg) per pair Old rolled zinc plated steel ZIN plated steel ball bearing WHEEls with removable zinc PLTE steel screws NOTE: LO RTING SE ON 20 (508mm) SLIE LENGTH PKGE 10 PIR PER RTON S26 SERIES STINLESS STEEL FULL EXTENSION RWER SLIES WITH STINLESS STEEL ERINGS MOEL NO. SIZE S26-0014 14 (356mm) S26-0016 16 (406mm) S26-0018 18 (457mm) S26-0020 20 (508mm) S26-0022 22 (559mm) S26-0026 26 (660mm) NOTE: STINLESS STEEL LL ERING SSEMLIES WITH REMOVLE STINLESS STEEL THREE FSTENERS MY E ORERE SEPRTELY. SEE PG.G30 (MOEL NO. S26-Y001) 5/8 (15mm) (21mm) 1/64 (.4mm) 17/32 (14mm) 5/64 (.2mm) 1-27/32 (47mm) RWER ROSS SETION WHEN ORERING...MESURE FROM INSIE FE TO EXTREME RER OF RWER S10 SERIES ZIN PLTE FULL EXTENSION RWER SLIES WITH ZIN PLTE ERINGS MOEL NO. SIZE S10-0014 14 (356mm) S10-0016 16 (406mm) S10-0018 18 (457mm) S10-0020 20 (508mm) S10-0022 22 (559mm) S10-0024 24 (610mm) S10-0026 26 (660mm) NOTE: ZIN PLTE STEEL LL ERING SSEMLIES WITH REMOVLE ZIN PLTE STEEL THREE FSTENERS MY E ORERE SEPRTELY. SEE PG. G30 (MOEL NO. S10-Y001) G18 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
rawer Slides OMPONENT S25 SERIES NSF LISTE STINLESS STEEL LL ERING TION 150 lbs (68kg) LO PITY POSITIVE STOPS FINGER TIP LEVER RWER RELESE S25 STINLESS STEEL RWER SLIES S25-SERIES SPEIFITIONS MOUNTING SPE REQUIRE HEIGHT RWER EXTENSION LO PITY TION PKGE 10 PIR PER RTON *S25 SERIES STINLESS STEEL RWER SLIES WITH STINLESS STEEL ERINGS SIZE MOEL NO. S25-0012 12 (305mm) S25-0014 14 (356mm) S25-0016 16 (406mm) S25-0018 18 (457mm) S25-0020 20 (508mm) S25-0022 22 (559mm) S25-0024 24 (610mm) S25-0026 26 (660mm) S25-0028 28 (711mm) *May not be identical to competitors products. SIE 9/16 (14mm) 3 (76mm) length of slide minus 4- (107mm) 150 lbs (68kg) per pair** STINLESS steel ball bearing wheels WITH removable stainless steel screws *S25 SERIES STINLESS STEEL RWER SLIES WITH S/S ERINGS W/ NYLON TIRE SIZE MOEL NO. S25-2012 12 (305mm) S25-2014 14 (356mm) S25-2016 16 (406mm) S25-2020 20 (508mm) S25-2022 22 (559mm) S25-2024 24 (610mm) S25-2026 26 (660mm) S25-2028 28 (711mm) *EQUIVLENT TO STNR-KEIL SERIES 1425 **LO RTING SE ON 18 (457mm) SLIE LENGTH NOTE: WHEN ORERING, MESURE FROM INSIE FE TO EXTREME RER OF RWER 9/16 (14mm) 3 (76mm) ROSS SETION 800-526-3694 www.componenthardware.com G19
rawer Slides RWER SLIES, LERNE S15 SERIES ZIN PLTE STEEL 75 lbs (40kg) LO PITY LLOWS RWER TO E ESILY REMOVE OMPONENT S35 SERIES ZIN PLTE STEEL FULL EXTENSION 100 lbs (50kg) LO PITY NO EFLETION LLOWS RWER TO E ESILY REMOVE specifications MOUNTING SPE REQUIRE HEIGHT RWER EXTENSION LO PITY material TION ITIONL SIE 3 (76mm) LENGTH OF SLIE MINUS 4- (107mm) 75 lbs (40kg) per pair OL ROLLE steel, ZIN PLTE, LER HROMTE NYLON ball bearing ROLLERS POSITIVE STOPS, FINGER TIP RELESE, REMOVLE specifications MOUNTING SPE REQUIRE HEIGHT RWER EXTENSION LO PITY material TION ITIONL SIE 2- (60mm) FULL TRVEL 100 lbs (50kg) per pair OL ROLLE steel, ZIN PLTE, LER HROMTE FRONT INTERMEITE WHEEL: NYLON ROLLER OUTER HNNEL SSEMLY: STEEL LL ERING POSITIVE MEHNIL STOP, FULL EXTENSION WITH VIRTULLY NO EFLETION, REMOVLE NOTE: LO RTING SE ON 18 (457mm) SLIE LENGTH PKGE 10 PIR PER RTON NOTE: LO RTING SE ON 18 (457mm) SLIE LENGTH PKGE 10 PIR PER RTON S15 SERIES STEEL ZIN PLTE RWER SLIES MOEL NO. SIZE S15-1012 12 (305mm) S15-1014 14 (356mm) S15-1016 16 (406mm) S15-1018 18 (457mm) S15-1020 20 (508mm) S15-1022 22 (559mm) S15-1024 24 (610mm) S15-1026 26 (660mm) NOTE: WHEN ORERING, MESURE FROM INSIE FE TO EXTREME RER OF RWER. 3 (76mm) S35 SERIES ZIN PLTE STEEL FULL EXTENSION RWER SLIES MOEL NO. SIZE S35-1016 16 (406mm) S35-1018 18 (457mm) S35-1020 20 (508mm) S35-1022 22 (559mm) S35-1024 24 (610mm) S35-1026 26 (660mm) NOTE: WHEN ORERING, MESURE FROM INSIE FE TO EXTREME RER OF RWER. 1-13/16 (46mm) G20 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
rawer Slides RWER SLIES, 3/4 (19mm) LERNE S30 SERIES ZIN PLTE STEEL FULL EXTENSION 75 lbs (40kg) LO PITY LLOWS RWER TO E ESILY REMOVE SPEIFITIONS MOUNTING space required height drawer extension load capacity material action additional features SIE 3/4 (19mm) 2-1/32 (52mm) with rollers 1- (32mm) without rollers full travel, controlled by roller replacement 75 lbs (40kg) per pair ZIN plated steel NYlon or non-corrosive metal rollers non-handed, removable (with rollers), rubber stops 1- (32mm) WITHOUT ROLLERS NOTE: LO RTING SE ON 18 (450mm) SLIE LENGTH PKGE 10 PIR PER RTON SIZE S30 SERIES ZIN PLTE STEEL FULL EXTENSION RWER SLIES MOEL NO. WITH NYLON ROLLERS MOEL NO. WITH METL ROLLERS MOEL NO. WITHOUT ROLLERS 18 (457mm) S30-1018 S30-3018 S30-2018 20 (508mm) S30-1020 S30-3020 S30-2020 22 (559mm) S30-1022 S30-3022 S30-2022 24 (610mm) S30-1024 S30-3024 S30-2024 3/4 (19mm) WITH ROLLERS 2-1/32 (52mm) ESSORIES: S30-Y001 S30-Y002 Nylon Roller (ea) Metal Roller (ea) (4 rollers required per pair) *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G21
rawer Pans RWER PNS RWER PNS STINLESS STEEL STINLESS STEEL WITH POLISHE FINISH OVE ORNERS TWO SIZES VILLE FOR USE IN FOO SERVIE TLES N FOO WRMERS IEL FOR UTENSILS N FROZEN FOO STORGE MEETS NSF RITERI OMPONENT STINLESS STEEL RWER PNS MOEL NO. NOMINL IMENSIONS FLNGE SIZE S81-1520- S81-2020- 15 x 20 x 5 (381mm x 508mm x 127mm) 20 x 20 x 5 (508mm x 508mm x 127mm) PKGE 6 TO MSTER RTON NOTE: OTHER EPTHS VILLE UPON PPLITION. 16 x 21- (406mm x 546mm) 21- x 21- (546mm x 546mm) RWER PNS HEVY-UTY THERMOPLSTI HEVY-UTY THERMOPLSTI RWER PNS MOEL NO. NOMINL IMENSIONS FLNGE SIZE S80-1520 S80-2020 15 x 20 x 5 (381mm x 508mm x 127mm) 20 x 20 x 5 (508mm x 508mm x 127mm) PKGE 6 TO MSTER RTON 16- x 21-3/4 (415mm x 550mm) 21-3/4 x 21-3/4 (550mm x 550mm) G22 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Stainless Steel rawer ssembly SPER RWER FRME OTTOM PLTE OMPONENT HEVY UTY S90 SERIES stainless steel drawer assemblies STINLESS STEEL, WELE ONSTRUTION THROUGHOUT S90 HEVY UTY 19 G. OUTER RWER HOUSING WITH 17 G. INTERNL FRME SSEMLY N FRONT PNEL SE90 Medium uty 20 ga. outer drawer housing with 19 ga. internal frame assembly and front panel UNIQUE UNI-OY ONSTRUTION LLOWS UNITS TO E STKE ONVENIENT, PREISE MOUNTING HOLES OFFER QUIK, ESY INSTLLTION 200 lb PITY SELF-LOSING RWER FETURE ENTIRE RWER SSEMLY EURRE N REY TO INSTLL OMPLETE WITH HEVY GUGE REMOVLE STINLESS STEEL OR PLSTI PN FULL EXTENSION- 90 PULL LLOWS ONVENIENT ESS N IS ESY TO KEEP LEN VILLE WITH OR WITHOUT YLINER LOK SSEMLY SPEIFITION GRE, MEETS MOST RHITETURL REQUIREMENTS 15 S/S RWER SSEMLY MOEL NO. ESRIPTION LOK PN *S90-0015-N *SE90-0015-N 15 (381mm) PN - S/S *S90-0015--N *SE90-0015--N 15 (381mm) PN YLINER S/S MOEL NO. S90-0015 SE90-0015 S90-0020 SE90-0020 IM. FOR 15 SS Y IM. FOR 20 SS Y 17-3/4 (451mm) 23- (594mm) 16- (419mm) 22-1/8 (562mm) 13-5/8 (346mm) 19- (489mm) 19- (497mm) 25-1/16 (636mm) 1- (38mm) 20 S/S RWER SSEMLY MOEL NO. ESRIPTION LOK PN 19-1 (506mm) *S90-0020-N *SE90-0020-N *S90-0020--N *SE90-0020--N 20 (508mm) PN - S/S 20 (508mm) PN YLINER S/S 6- (175mm) 6-3/4 (171mm) *NSF LISTING PPLIES TO RWER SSEMLIES UTILIZING STINLESS STEEL PNS ONLY. 22-1 (583mm) 9/16 (14mm) SLOTTE MOUNTING HOLES (12mm) STINLESS STEEL OTTOM PLTE (OPTIONL)* MOEL NO. ESRIPTION S90-X030 20 x 20 (508mm x 508mm) STINLESS STEEL SPER (OPTIONL) MOEL NO. ESRIPTION S90-X032 20 x 20 x 2- (508mm x 508mm x 64mm) S90-X033 15 x 20 x 2- (381mm x 508mm x 64mm) *USE TO ROP THE RWER ELOW NORML 2 RETURN ON TLE TOP OR S MULLION ETWEEN RWERS *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G23
ash rawer ssembly STINLESS STEEL SH RWER SSEMLY REF. SH RWER SSEMLY WITH TRY MOEL NO. S95-1000 STINLESS STEEL SPEIFITION GRE SH RWER SSEMLY SOLI STINLESS STEEL ONSTRUTION FULL EXTENSION RWER SLIE OFFERS ESE OF OPERTION LL RWERS FURNISHE WITH STINLESS STEEL FE YLINER LOKS ESIGNE FOR ESY UNEROUNTER MOUNTING SMOOTH N QUIET OPERTION REF. SH RWER SSEMLY WITH TRY MOEL NO. -1000 LK POWER OTE FINISH ENTER SEURITY RWER KEY-LOK STNR S PLSTI 5 OIN/5 ILL REMOVLE MONEY TRY INSERT JUSTLE ILL SEPRTOR FOR FOREIGN URRENY STINLESS STEEL MONEY LIPS STINLESS STEEL OIN REKING PLTE SLOTS ON RWER FE FOR HEKS/REEIPTS/OUPONS RWER ELL NON-SKI RUER FEET 16- (413mm) 14- (362mm) 16-5/8 (422mm) 13- (343mm) 4 (102mm) 3/4 (19mm) OVERLL IMS L x W x H: 16.125 (410mm) x 16.375 (416mm) x 4 (102mm) REF. URRENY TRY WITH OVER MOEL NO. S95-Y002 REMOVLE URRENY TRY WITH ROP HNLE FOR ESY REMOVL ESIGNE TO OMMOTE PORTLE SH NEES-ideal for drawers, safes and desks POSITIVE SPRING TION MONEY HOL OWN lock with stainless steel cylinder STINLESS STEEL SH RWER LESS URRENY TRY MOEL NO. S95-Y001 REPLEMENT URRENY TRY MOEL NO. -Y004 STNR S PLSTI 5 OIN/5 ILL REMOVLE MONEY TRY INSERT JUSTLE ILL SEPRTOR FOR FOREIGN URRENY STINLESS STEEL MONEY LIPS KEY FOR SH RWER SSEMLIES - MOEL NO. S95-Y001-KEY KEY FOR URRENY TRY SSEMLIES - MOEL NO. S95-Y002-KEY G24 800-526-3694 www.componenthardware.com *May not be identical to competitors products. REF.
rawer Fronts & rackets RWER FRONTS & RKETS RWER FRONTS HEVY- UTY STINLESS STEEL STINLESS STEEL 20 GUGE No. 4 POLISHE FINISH FULL GRIP...EVELE EGE PULL FURNISHE WITH (6) #10-24 WEL STUS HEVY-UTY STINLESS STEEL RWER FRONTS MOEL NO. IMENSIONS WEL STU ENTERS J85-2000 23-1/8 x 6- (590mm x 165mm) 19-5/8 x 3 (498mm x 76mm) NGLE RKET RWER SSEMLY KIT I. HOLE ONVENIENT...REY TO USE J85-2000 RWER FRONT NGLE RKET RWER SSEMLY KIT MOEL NO. J85-1000 THE NGLE RKET RWER SSEMLY KIT IS N OPTIONL ESSORY FOR MOUNTING RWER FRONT TO RWER HOUSING. 3- (89mm) 2 (51mm) 2 (51mm) 4 (102mm) 5 (127mm) *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G25
umpers & Grommets UMPERS & GROMMETS REESSE UMPERS FIG. MOEL NO. E F 1 Q20-2081 5/8 3/16 (5mm) 1/8 (3mm) 3/16 (5mm) 2 Q20-2095 1 (24mm) 1/8 (3mm) 3/16 (5mm) 5/32 (4mm) GROMMETS FIG. MOEL NO. E 3 Q24-0220 9/16 (14mm) 1/16 (2mm) 3 Q24-0225 5/8 1/16 (2mm) 3 Q24-0230 13/16 (20mm) 9/32 (7mm) 1/16 (2mm) 5/8 4 Q24-0320 9/16 (14mm) 1/8 (3mm) LRGE IMETER GROMMETS FIG. MOEL NO. E 5 Q24-0420 1- (48mm) 1-1/8 (29mm) 1/16 (2mm) 1- (38mm) 5 Q24-0520 2- (75mm) 2-1/8 (54mm) 7/16 (11mm) 1/16 (2mm) 2- (64mm) UTTON UMPERS FIG. MOEL NO. E F 6 Q26-3062 3/64 (1mm) 3/64 (1mm) 6 Q26-4071 3/16 (5mm) 1/8 (3mm) 1/16 (2mm) 1/16 (2mm) 7 Q26-4072 3/16 (5mm) 3/16 (5mm) 3/16 (5mm) 1/16 (2mm) PRESSURE SENSITIVE UMPERS FIG. MOEL NO. HEIGHT IMETER 8 Q21-5003.20 (5mm).44 (11mm) 8 Q21-5017.38.75 (20mm) F FIG. 3 FIG. 4 E FIG. 1 FIG. 2 F E E FIG. 5 E FIG. 6 FIG. 7 I FIG. 8 F HGT F E G26 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
all earing Systems LL ERING SYSTEMS LL ERING SYSTEMS... OMPREHENSIVE GUIE TO ERING SELETION SPEIFILLY FOR FOO SERVIE EQUIPMENT PPLITIONS OMPONENT HRWRE HS ESIGNE N INNOVTIVE LL ERING SYSTEM WITH UL FETURE. FIRST... SYSTEM THT STISFIES THE OFTEN ENOUNTERE PRIE N ELIVERY PROLEM WHEN PURHSING EVEN STNR SIZE ERINGS IN SMLL QUNTITIES. THIS SYSTEM PERMITS OFF THE SHELF ELIVERY N SMRT PRIES NO MTTER HOW SMLL THE ORER QUNTITY. SEON...N PERHPS THE EST... ERING SYSTEM THT PERMITS THE USER TO ONFIGURE ESSENTIL ERING OMPONENTS TO SSEMLE WIE RNGE OF ERING SIZES N STYLES TO MEET INIVIUL ESIGN REQUIREMENTS. LISTE ON THIS PGE IS SELETION OF ERINGS, SREW STUS N RIVETS WHIH LLOWS YOU TO HOOSE ERING SSEMLY TO SUIT YOUR SPEIFI REQUIREMENTS. INSTRUTIONS: SELET NY ERING WITH HOLE. IF SHOULER IS REQUIRE HOOSE SHOULER SPER(S) S REQUIRE. SELET THE RIVER OR SREW STU WITH LENGTH TO STISFY SHOULER, SHFT LERNE N THIKNESS OF ERINGS. (SEE ILLUSTRTION) SREW SHOULER SPER (IF REQUIRE) SHFT LERNE LENGTH 1/4-20 I. stainless steel srew STUS stainless steel shoulder spacers OR model no. th k model no. th k 30-X003 10-X004 7/32 RIVET SELETE ERING 1/32 (.7mm) OVERLL 30-X004 30-X008 5/8 3/4 (19mm) 10-X008 10-X009 3/32 (2mm) 1/32 (1mm) 20-1013 20-1019 20-1230 20-1028 20-1819 LENGTH stainless steel RIVETS model no. th k 20-1032 23-1013 10-X012 20-1219 24-1013 10-X013 3/4 (19mm) *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G27
Flat earings FLT ERINGS 20 SERIES 1/32 (.8mm) FLT ERINGS with HOLE MOEL NO. INNER RE OUTER RE LO* 20-1013 STEEL STEEL 20-1019 STEEL STEEL (22mm) 7/32 9/32 (7mm) 42 lbs (19kg) 57 lbs (25kg) 10 SERIES 1/32 (.8mm) 20-1032 STEEL STEEL 20-1028 STEEL STEEL 20-1819 STEEL NYLON & STEEL 1- (33mm) 7/32 7/32 9/32 (7mm) 9/32 (7mm) 57 lbs (25kg) 87 lbs (39kg) 53 lbs (24kg) 20-1230 STINLESS ST L STINLESS ST L 20-1219 STINLESS ST L STINLESS ST L 10-1013 STEEL STEEL 29/32 (23mm) 1- (33mm) FLT ERINGS with RIVET (22mm) 7/32 1/8 (3mm) 90 lbs (40kg) 87 lbs (39kg) 42 lbs (19kg) 30 SERIES 1/32 (1mm) 10-1016 STEEL STEEL 10-1025 STEEL STEEL 1- (33mm) 7/32 1/8 (3mm) 3/32 57 lbs (25kg) 87 lbs (39kg) 1/4-20 10-1034 STEEL STEEL 1- (33mm) 19/32 (15mm) 3/16 (5mm) 87 lbs (39kg) 10-1822 STEEL NYLON & STEEL 7/32 FLT ERINGS with SREW STU 1/8 (3mm) 53 lbs (24kg) 40 SERIES #10-32 THS 30-1013 STEEL STEEL 30-1210 STINLESS ST L STINLESS ST L (22mm) 29/32 (23mm) 7/32 11/32 (9mm) 42 lbs (19kg) 90 lbs (40kg) 30-1034 STEEL STEEL 1- (33mm) FLT ERINGS with TPPE HOLE 40-1240 STINLESS ST L STINLESS ST L *earing Load Ratings ased on 600 R.P.M. (22mm) 19/32 (15mm) 87 lbs (39kg) #10-32 80 lbs (35kg) G28 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
oncave & Rubber Tire earings ONVE & RUER TIRE ERINGS 1/32 (1mm) ONVE ERING with HOLE STEEL INNER and OUTER RE MOEL NO. LO* 24-1013 1-3/16 (30mm) 80 lbs (36kg) RUER TIRE ERING with HOLE STEEL INNER and OUTER RE MOEL NO. LO* 23-1013 1- (33mm) 87 lbs (39kg) 1/32 (1mm) 1/32 (1mm) ONVE ERING with RIVET STU STEEL INNER and OUTER RE MOEL NO. LO* 14-1010 1-3/16 (30mm) 1/8 (3mm) 80 lbs (36kg) RUER TIRE ERING with RIVET STU STEEL INNER and OUTER RE MOEL NO. LO* 13-1010 1- (33mm) 1/8 (3mm) 87 lbs (39kg) 1/32 (1mm) 1/32 (1mm) 1/4-20 ONVE ERING with SREW STU STEEL INNER and OUTER RE MOEL NO. LO* RUER TIRE ERING with SREW STU STEEL INNER and OUTER RE MOEL NO. LO* 1/32 (1mm) 1/4-20 34-1010 1-3/16 (30mm) 80 lbs (36kg) 33-1010 1- (33mm) 87 lbs (39kg) 34-1016 1-3/16 (30mm) 19/32 (15mm) 1/8 (3mm) 80 lbs (36kg) 33-1016 1- (33mm) 19/32 (15mm) 87 lbs (39kg) *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G29
all earing ssemblies, Pulley & Wheels E LL ERING SSEMLIES, PULLEY & WHEELS REF ELRIN ERING N STINLESS STEEL LL ERING SSEMLY WITH REMOVLE THREE FSTENER MOEL NO. MT L. TYPE E F S26-Y001 ST. ST L LL R G S10-Y001 Z.P. ST L LL R G.760 (19mm).760 (19mm).250.250.187 (5mm).187 (5mm).420 (11mm).420 (11mm).300.300 10-24 10-24 F TH S52-X101 ELRIN SOLI 1.070 (27mm).375.187 (5mm).500.260 (7mm) 1/4-20 S52-X001 ST. ST L LL R G 1.070 (27mm).375.187 (5mm).500.260 (7mm) 1/4-20 E REF STINLESS STEEL and STEEL WHEELS IEL FOR RWER SLIES N ONVEYOR SSEMLIES HET TRETE INNER N OUTER REWYS LL METL ONSTRUTION STINLESS STEEL WHEEL MOEL NO. IR-0031 I.62 REF STINLESS STEEL WHEEL MOEL NO. IR-1061 ZIN PLTE STEEL with OFFSET USHING MOEL NO. IR-2112.63 1.94 (49mm) STEEL WHEEL ZIN PLTE MOEL NO. IR-2263 1.94 (49mm).8 (21mm).8 (21mm) REF NYLON WHEEL PULLEY with STEEL RES.035 (1mm).315 NYLON/STEEL WHEEL PULLEY MOEL NO. 25-1810 2 (51mm).136 (3mm) G30 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Sliding oor omponents F E SLIING OOR OMPONENTS OVERHE TRK OMPONENTS FOR SLIING OORS REF 1- (32mm) 1-3/4 (44mm) OMPONENT REF MOEL NO. FRONT OOR SHEVE, ZIN PLTE STEEL 3/4 (19mm) SIE MOUNTE OOR HNGER WHEEL TYPE OMPONENT I. ERINGS 58-5511 FLT, STEEL PLTE, LL ERING 58-5513 FLT, NYLON SURFE, STEEL INNER RES, LL ERING FRONT SHEVE RER SHEVE SLIING OOR TRK EXTRUE LUMINUM 16 GUGE MOEL NO. LENGTH 57-0048 48 (1219mm) 57-0060 60 (1524mm) 57-0072 72 (1828mm) 57-0120 120 (3048mm) 57-0144 144 (3657mm) REF REF MOEL NO. RER OOR SHEVE, ZIN PLTE STEEL 3/4 (19mm) SIE MOUNTE OOR HNGER WHEEL TYPE 58-5521 FLT, STEEL PLTE, LL ERING 58-5523 FLT, NYLON SURFE, STEEL INNER RES, LL ERING MTERIL: STEEL, ZIN PLTE UMPER: SOLI RUER OOR STOP MOEL NO. 60-1086 REF E GUIE PINS MOEL NO. 56-1096 SPRING LOE with PUSH-ON SPEE NUTS 3/16 (5mm) 1- (38mm) MTERIL: HROME PLTE RSS REF F MOEL NO. 62-1093 FOR 3/4 (19mm) SLIING OORS MTERIL: NYLON O.. SIZE: 1-3/4 X 2-1/8 (44mm x 54mm) OOR GUIE 1 (23mm) 1-3/4 (45mm) 1-5/8 (41mm) 2-1/8 (54mm) 3/4 (19mm) *May not be identical to competitors products. 800-526-3694 www.componenthardware.com G31
Index MOEL NO. PGE NO. MOEL NO. PGE NO. MOEL NO. PGE NO. MOEL NO. PGE NO. MOEL NO. PGE NO. 10-1013 G28 10-1016 G28 10-1025 G28 10-1034 G28 10-1822 G28 10-X004 G27 10-X008 G27 10-X009 G27 10-X012 G27 10-X013 G27 13-1010 G29 14-1010 G29 20-1013 G27, G28 20-1019 G27, G28 20-1028 G27, G28 20-1032 G27, G28 20-1219 G27, G28 20-1230 G27, G28 20-1819 G27, G28 23-1013 G27, G29 24-1013 G27, G29 25-1810 G30 30-1013 G28 30-1034 G28 30-1210 G28 30-X003 G27 30-X004 G27 30-X008 G27 33-1010 G29 33-1016 G29 34-1010 G29 34-1016 G29 40-1240 G28 56-1096 G31 57-0048 G31 57-0060 G31 57-0072 G31 57-0120 G31 57-0144 G31 58-5511 G31 58-5513 G31 58-5521 G31 58-5523 G31 60-1086 G31 62-1093 G31-1000 G24 -Y004 G24 GS15-1112-Q G3 GS15-1112-QP G3 GS15-1116-Q G3 GS15-1116-QP G3 GS15-1118-Q G3 GS15-1118-QP G3 GS15-1124-Q G3 GS15-1124-QP G3 GS15-1130-Q G3 GS15-1130-QP G3 GS15-113030Q G3 GS15-1132-Q G3 GS15-1132-QP G3 GS15-1136-Q G3 GS15-1136-QP G3 GS15-1142-Q G3 GS15-1142-QP G3 GS15-1148-Q G3 GS15-1148-QP G3 GS15-4112-Q G3 GS15-4116-Q G3 GS15-4118-Q G3 GS15-4124-Q G3 GS15-4130-Q G3 GS15-413030Q G3 GS15-4132-Q G3 GS15-4136-Q G3 GS15-414030Q G3 GS15-4142-Q G3 GS15-4148-Q G3 IR-0031 G30 IR-1061 G30 IR-2112 G30 IR-2263 G30 J85-1000 G25 J85-2000 G25 M10-8332 G9 M10-8333 G9 M11-8201 G9 M12-9293 G12 M12-9294 G12 M12-9295 G12 M15-9210 G10 M15-9211 G10 M20-2590 G16 M21-2580 G16 M22-2420 G16 M22-2430 G16 M24-2260 G16 M25-9469 G16 M27-2490 G16 M30-2400 G15 M30-5920 G15 M32-2401 G15 M35-1000 G15 M35-2000 G15 M36-0201 G15 M36-0611 G15 M36-0801 G15 M48-0112 G10 M48-0121 G10 M48-0122 G10 M48-0131 G10 M48-0132 G10 M48-0134 G10 M48-0142 G10 M48-0143 G10 M48-0144 G10 M48-0154 G10 M74-2078 G12 M74-3078 G12 M75-1002 G11 M75-5003 G11 M80-2500 G9 P10-0370 G14 P11-0480 G14 P20-0490 G14 P22-0006 G14 P30-0802 G13 P30-1000 G13 P30-4750 G13 P30-4751 G13 P30-4752 G13 P30-4760 G13 P30-4761 G13 P30-4762 G13 P30-4770 G13 P30-4771 G13 P30-4772 G13 P30-4780 G13 P30-4781 G13 P40-1010 G5 P44-1010 G6 P44-5000 G6 P45-3000 G6 P45-3500 G6 P45-4000 G6 P46-1010 G6 P46-1012 G6 P47-1012 G5 P47-1018 G5 P48-1010 G4 P48-1012 G4 P48-X002 G4 P49-1010 G5 P49-1500 G4 P49-1500-6 G4 P49-2100 G5 P49-2200 G5 P50-1010 G6 P50-1011 G6 P50-5000 G7 P51-1010 G6 P51-1024 G6 P52-1010 G6 P53-1012 G6 P60-1010 G7 P62-1010 G7 P62-1014 G7 P63-1012 G7 P68-1010 G9 P70-1010 G9 P73-1000 G7 P73-2000 G7 P75-1000-Q G2 P75-4000 G2 P75-5000 G2 P80-3000 G5 P80-3020 G5 P80-3030 G5 P88-1010 G9 P90-1000 G8 P90-2000 G8 P90-2000- G8 P90-5000 G8 P90-5000- G8 P91-5000 G8 Q20-2081 G26 Q20-2095 G26 Q21-5003 G26 Q21-5017 G26 Q24-0220 G26 Q24-0225 G26 Q24-0230 G26 Q24-0320 G26 Q24-0420 G26 Q24-0520 G26 Q26-3062 G26 Q26-4071 G26 Q26-4072 G26 R74-8000-RH G11 R74-8001-LH G11 R74-8100-RH G11 R74-8101-LH G11 R74-9000-RH G11 R74-9001-LH G11 R75-6661 G12 R75-6662 G12 R76-1000 G12 S10-0014 G18 S10-0016 G18 S10-0018 G18 S10-0020 G18 S10-0022 G18 S10-0024 G18 S10-0026 G18 S10-Y001 G18, G30, S15-1012 G20 S15-1014 G20 S15-1016 G20 S15-1018 G20 S15-1020 G20 S15-1022 G20 S15-1024 G20 S15-1026 G20 S25-0012 G19 S25-0014 G19 S25-0016 G19 S25-0018 G19 S25-0020 G19 S25-0022 G19 S25-0024 G19 S25-0026 G19 S25-0028 G19 S25-2012 G19 S25-2014 G19 S25-2016 G19 S25-2020 G19 S25-2022 G19 S25-2024 G19 S25-2026 G19 S25-2028 G19 S26-0014 G18 S26-0016 G18 S26-0018 G18 S26-0020 G18 S26-0022 G18 S26-0026 G18 S26-Y001 G18, G30 S30-1018 G21 S30-1020 G21 S30-1022 G21 S30-1024 G21 S30-2018 G21 S30-2020 G21 S30-2022 G21 S30-2024 G21 S30-3018 G21 S30-3020 G21 S30-3022 G21 S30-3024 G21 S30-Y001 G21 S30-Y002 G21 S35-1016 G20 S35-1018 G20 S35-1020 G20 S35-1022 G20 S35-1024 G20 S35-1026 G20 S52-0020 G17 S52-0022 G17 S52-0024 G17 S52-0026 G17 S52-2020 G17 S52-2022 G17 S52-2024 G17 S52-2026 G17 S52-X001 G17, G30 S52-X101 G17, G30 S80-1520 G22 S80-2020 G22 S81-1520- G22 S81-2020- G22 S90-0015 G23 S90-0015--N G23 S90-0015-N G23 S90-0020 G23 S90-0020--N G23 S90-0020-N G23 S90-X030 G23 S90-X032 G23 S90-X033 G23 SE90-0015 G23 SE90-0015--N G23 SE90-0015-N G23 SE90-0020 G23 SE90-0020--N G23 SE90-0020-N G23 S95-1000 G24 S95-Y001 G24 S95-Y001-KEY G24 S95-Y002 G24 S95-Y002-KEY G24 SG-101 G2 W37-3000-SS G11 G32 800-526-3694 www.componenthardware.com *May not be identical to competitors products.
Notes
1890 Swarthmore venue PO ox 2020 Lakewood NJ 08701 Tel. 800-526-3694 732-363-4700 Fax 732-364-8110 www.componenthardware.com