3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com Guard H100 Rab Lighting Catalog Number Manufacturer Rab Lighting Description Guard, Powder Coated Die Cast Aluminum Guard; Used On H101/HB101 Floodlight, HH1 Hood; Rab Brand; Approval Ul (Canada Weight per unit 0.8000 (lbs/each) Product Category 20010412160834 Descriptions Additional Information Commodity Description Long Description Manufacturer Information Brand APPROVAL UL (CANADA AND US); WEIGHT 0.75 LB Indoor Lighting - High Intensity Discharge GUARD, WHITE POWDER COATED DIE CAST ALUMINUM GUARD; USED ON H101/HB101 FLOODLIGHT, HH1 HOOD; BRAND; APPROVAL UL (CANADA Taxonomies, Classifications, and Categories Type WHITE POWDER COATED DIE CAST ALUMINUM GUARD Packaging Carton 1 Weight Per each 0.8 Uses, Certifications, and Standards Used On H101/HB101 FLOODLIGHT, HH1 HOOD
JOB NAME: DATE: TYPE: DESCRIPTION Guard protects lamp from damage and vandalism. Die cast aluminum. Fits both H101 and HB101. Can be combined with HH1 Hood or used alone. SPECIFICATIONS sensor and fixture designs are protected under U.S. and International Intellectual Property laws Color: Weight: 0.75 Note: Specifications may change without notice Lighting, Inc. 170 Ludlow Ave Northvale, NJ 07647 Tel: 888-1000 Fax: 888-1232 2008
INCANDESCENT H SYSTEM FLOODS A system of interchangeable Floodlights, Hoods, Guards & Visors. Rugged die cast aluminum housing with powder coat finish Lamp recessed 1 from lip for side glare reduction Larger diameter housing for easier relamping H101 Bell Large size flood for easier relamping and glare reduction. Durable one piece die casting with rugged mounting arm, weatherproof gasket and drain holes. Accepts 150 watt PAR 38 max. Lamp not supplied. with integral guard and glass lens for maximum glare reduction and lamp protection Set screw for hood, grill or visor attachment Heavy duty mounting arm with internal O-ring, locking teeth, and stainless steel screw EZ Grip locknut matches fixture finish and can be adjusted with fingers, pliers or a screwdriver Large Silicone rubber gasket provides weatherproof protection around lamp and socket H2 Dual Flood Kit Kit includes 2 H101 Bell floodlights pre-assembled on a CU4 universal mounting plate 10º Spot PAR38 60º Flood PAR38 Lamps offer a variety of beam spread choices. See page 128. HG Guard: Protects lamp from damage and vandalism HH Hood with glass lens reduces glare and protects lamp from water and impact damage Floodlight only: Dual Floodlight Kit: Catalog Numbers Green H101A H101B H101W H101VG H2A H2B H2W H2VG Specifications UL Listing: Suitable for wet locations. Suitable for mounting within 4 of the ground. Can be aimed above horizontal with accessory hood or visor Sockets: Porcelain with all copper current carrying components Compatability with old H100: H101 floods and accessories replace the discontinued H100 and accessories. Parts are not interchangeable. Swivels: Fully adjustable with sure-grip locks. 1/2 NPS threaded arm with serrated locking swivel fits all standard mounting covers. Color matched EZ Grip lock nuts. Stainless steel screw. Housings: Die cast aluminum with powder coat finish Lamps: Medium base PAR-38 lamps up to 150 watts. Halogen lamps give brighter light and choice of beam spreads. See pg. 128 Gaskets: High temperature silicone rubber extends around both socket and lamp. The designs of fixtures are protected under U.S. and international intellectual property laws. Wiring Diagrams Installation Instructions Product Specifications Dimensions 3 7.6cm 7 17.8 cm 4 5 / 8 11.7 cm 5 5/8 TEL 888 1000 FAX 888 1232 Gaskets: High temperature silicone rubber extends around both socket and lamp. 130 17 1 / 2 44.8 cm
HB101 Bullet Bullet design with large glare shield for effective light control. Durable one piece die cast with rugged mounting arm, weatherproof gasket and drain holes. Accepts 150 watt PAR 38 max. Lamp not supplied. HB2 Dual Flood Kit HH Hood Hood with tempered glass lens reduces glare and protects lamp from water and impact damage. Die cast aluminum. Fits H101 and HB101. Can be combined with HG1 Guard. Hood includes glass HH1 Hood HG Guard Guard protects lamp from damage and vandalism. Die cast aluminum. Fits both H101 and HB101. Can be combined with HH1 Hood or used alone. No glass with guard HG1 Guard Die cast aluminum visor with integral metal grill and tempered glass lens for maximum glare reduction and lamp protection. Visor includes glass & guard INCANDESCENT FLOODS Kit includes 2 HB101 Bullet floodlights pre-assembled on a CU4 universal mounting plate HH1 Hood HG1 Guard Green HB101A HB101B HB101W HB101VG Green HH1A HH1B HH1W HH1VG Green HG1A HG1B HG1W HG1VG Green HV1A HV1B HV1W HV1VG HB2A HB2B HB2W H2BVG 7 17.8 cm 2 1 /4 5.7 cm 3 /8.9 cm 6 1 /4 15.8 cm 5 5/ 8 5 5 / 8 5 5 /8 5 5/ 8 3 7.6 cm 4 5 / 8 11.7 cm 151 /2 39.4 cm 131 TEL 888 1000 FAX 888 1232
LIGHTING - All Products > Landscape Lighting > Landscape Accessories > HID FLOODS WALLPACKS AREA LIGHTS OUTDOOR SENSORS INDOOR SENSORS HIGH/LOW BAYS VANDALPROOF LANDSCAPE LIGHTING VAPORPROOF QUARTZ FLOODS WORKLIGHTS WEATHERPROOF EXPLOSIONPROOF POLES LAMPS/BALLASTS sensor and fixture designs are protected under U.S. and International Intellectual Property laws DIMENSIONS Cleanly styled molded PVC cap Set screw locks cap to post Die cast aluminum cap to hold heavier HID floods securely 1/2" threaded hole fits standard floodlights & lawn lights Internal seal provides weatherproof fit Thick wall PVC post with molded-in color Can be used with Post Adapter an option that lets you add outlets and sensors PHOTOMETRICS Dimension Drawing Search GO introduces Steel Square poles Ready for quick shipment from many warehouses! 1985-2008 LIGHTING, ALL RIGHTS RESERVED. Terms of Sale