TL SERIES Nitrogen Generators Transmission Line Pressurization N2-GEN rc Suppression System www.southteksystems.com commercialsales@southteksystems.com 888.526.6284 South-Tek Systems
2 N 2 -GEN rc Suppression System The N 2 -GEN provides an infinite supply of 98%+ pure Nitrogen, ensuring a constant -40 o to -70 o F dew point within the transmission line. y freeing the environment of oxygen, moisture and contaminants, the N 2 -GEN maintains the integrity of the transmission line and prevents voltage arcing. The N 2 -GEN was designed with minimal circuitry and moving parts, limiting failure points and maximizing life expectancy. Unlike a dehydrator, there is no need to constantly monitor the equipment or purchase annual rebuild kits. With Pressure Swing dsorption (PS) technology, the N 2 -GEN requires only one quick and inexpensive filter change-out per year. OUT SOUTH-TEK SYSTEMS ONTENTS We RE Nitrogen Our team is dually focused on customer support and a technical, in-depth understanding of applications such as the pressurization of transmission lines - ensuring the ultimate user experience. ecause of this dedication, South-Tek has become one of the largest manufacturers of Nitrogen Generation equipment with over 8,000 systems installed in the United States and abroad. Those range from the small start-up research laboratory or local industrial equipment shop to a full listing of Fortune 50 Industrial plant sites, many of which have chosen us as their worldwide standard for Nitrogen Generation. Model Specifications 03 Schematics 05 Warranty Information 08 With a commitment to ongoing research and development, we ve created Patented technologies that maximize the longevity and efficiency of Nitrogen Generators. Not only do we provide the best user experience, but we re the most innovative manufacturer of Nitrogen Generation technology.
3 TL SERIES TYPE MODELS N 2 -GEN - TL-450 UL 508 listed, wall-mount unit Pressure Swing dsorption (PS) technology Preventative maintenance reminder Provided with integral ir ompressor Includes 28 gal. N 2 receiver tank (4 dia. x 47 H) TL-450 *ackup cylinder not included Specifications Minimum nitrogen purity 98% Minimum flow rate 450 SFD Dew point -40 o to -70 o F Electrical 0 V, 5 MPS Dimensions 28.5 H x 2.8 W x 0.2 D N 2 -GEN - TL-050 UL 508 listed, skid-mount unit Pressure Swing dsorption (PS) technology Preventative maintenance reminder Provided with integral ir ompressor Integrated 5.5 gal. N 2 receiver tank TL-050 *ackup cylinder not included Specifications Minimum nitrogen purity 98% Minimum flow rate,050 SFD Dew point -40 o to -70 o F Electrical 0 V, 5 MPS Dimensions 58 H x 26 W x 8 D Installation & larm Integration Options Type Installation Kit (TL-450 & 050) Low Pressure larm (requires Gas Sampling Kit) Regulator Kit Dew Point larm (requires Gas Sampling Kit) Gas Sampling Kit Low Pressure & Dew Point ombination Package Power Failure larm Quick-heck - Portable N 2 Purity Sensor System Diagnostic & Leak Detection larm nnual Filter Replacement Kit
4 TL SERIES TYPE 3 MODELS N 2 -GEN - TL-725 & TL-2625 UL 508 listed, skid-mount units Pressure Swing dsorption (PS) technology Preventative maintenance reminder Requires STS-NF--3-J ir ompressor Package Includes 30 gal. N 2 receiver tank (skid-mount) Specifications Minimum nitrogen purity 98% Minimum flow rate (SFD),725 / 2,625 Dew point -40 o to -70 o F Skid weight 35 lbs. Skid dimensions 66 H x 29 W x 33 D N 2 generator electrical 0 V, 8 MPS STS-NF--3-J ir ompressor Package 2 hp piston, oil lubricated w/ after-cooler 7 gal. tank w/ pneumatic auto-drain dded filtration to ensure dry, oil-free air omplete with refrigerant dryer Specifications ir flow output 7.6 SFM @ 25 PSI ir compressor dim. 57 H x 27 W x 6 D Refrigerant dryer dim. 5 H x 9 W x 6 D Refrigerant dryer elec. 5 V, 0 MPS ir compressor elec. Ph 20/208/230V 3Ph 208/230/460V STS-NF--3-J ir ompressor TL-725/TL-2625 Nitrogen Generator Refrigerant Dryer *ackup cylinder not included Installation & larm Integration Options Type 3 Installation Kit (TL-725) Low Pressure larm (requires Gas Sampling Kit) Regulator Kit Dew Point larm (requires Gas Sampling Kit) Gas Sampling Kit Low Pressure & Dew Point ombination Package Power Failure larm Quick-heck - Portable N 2 Purity Sensor System Diagnostic & Leak Detection larm N 2 Generator & ir ompressor Filter Replacement Kits
D 5 TL-450 INSTLLTION SHEMTI 8 7 6 5 4 3 2 ITEM # STS PRT # DESRIPTION OPTIONL / STNDRD TL-00450 NITROGEN GENERTOR STNDRD 2 0-TL-02 60# TNK SSEMLY STNDRD 3 05-TYP-GR 00/200 ND MPS MOUNTING RKETS INSTLLTION OPTIONL 3 TEE WILL E INSTLLED ND SUPPLIED Y OTHERS IF KUP YLINDER IS INSTLLED NITROGEN OUT TO TOWER STNDRD 3 PRONG ELETRIL ORD WILL E PROVIDED Y STS 2 STS REOMMENDS INSTLLING KUP YLINDER (SUPPLIED Y OTHERS) WITH HIGH PRESSURE REGULTOR SET TO 30 PSIG (STS OPTIONL PRT# 4-TL-05) OPTIONL PLUMING KIT ETWEEN EQUIPMENT (STS PRT# 4-TL-02) WLL STRP KIT PROVIDED Y STS (STS PRT # 0-000-) NOTES: () LL ONNETION RE /4" NPT UNLESS OTHERWISE SPEIFIED. (2) SEE DRWING DD-TYPP-TL-00450 FOR THE NITROGEN GENERTORS DESIGN DT. (3) SEE DRWING 05-TYP-TI FOR MOUNTING RKET INSTLLTION GUIDE (4) SEE SHEET 2 FOR ISO VIEW. (5) DDITIONL ESSORY OPTIONS NOT SHOWN WITHIN THIS DRWING THT MY E PURHSED FROM STS RE S FOLLOWS; 4-TL-0, REGULTOR KIT, 4-TL-02, PLUMING INSTLLTION KIT, 4-TL-04, INSTLLTION KIT FOR DDITIONL TRNSMISSION LINES, 4-TL-05, HIGH PRESSURE K YLINDER REGULTOR KIT, 4-TL-06, PRESSURE GUGE FOR DDITIONL TRNSMISSION LINES, ND 4-TL-GS, GS SMPLE INSTLLTION KIT. 02-0 00 - REV ER# SHEET GENERL DRWING UPDTE MODIFID OVERLL STNDRD INITIL DRWING RELESE DESRIPTION 05/04/206 02/2/206 DRWN PPR. REVISIONS: ONLY THE LTEST 3 REVISIONS WILL E SHOWN. OLDER REVISIONS ONSOLIDTED ND FILED. DTE 02/0/205 PROPRIETRY ND ONFIDENTIL THE INFORMTION ONTINED IN THIS DRWING IS THE SOLE PROPERTY OF SOUTH-TEK SYSTEMS. NY REPRODUTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF SOUTH-TEK SYSTEMS IS PROHIITED. MTERIL: FINISH: WEIGHT: PROJET NME: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WHOLE NUMER DIM's: ONE DE.:.2, TWO DE.:.02 THREE DE.:.005, NG.:.05 TL-00450 GENERL RRNGEMENT OMMERIL GENERL SSEMLY DRWINGS NUMER: DRWN: DTE: 02/2/6 PPROVED: DTE: 02/6/6 SIZE: SLE: SHEET: :0 OF 2 REVISION: G-TYPP-TL-00450 02 8 7 6 5 4 3 2 D -
D 6 TL-050 INSTLLTION SHEMTI 8 7 6 5 4 3 2 NITROGEN OUT TO TRNSMISSION TOWER ONE OF THE PORTS ON THIS STREET TEE WILL OME PLUGGED. IF KUP YLINDER IS INSTLLED THEN REMOVE PLUG ND INSTLL PROPER PLUMING ONNETION OPTIONL PLUMING KIT ETWEEN EQUIPMENT (STS PRT# 4-TL-02) STS REOMMENDS INSTLLING KUP YLINDER (SUPPLIED Y OTHERS) WITH HIGH PRESSURE REGULTOR SET TO 30 PSIG (STS OPTIONL PRT# 4-TL-05) DRIN LINES N E PLUMED TO SITE DRIN THERE WILL E (4) SHIPPING OLTS ON THE OTTOM THT WILL NEED TO E REMOVED PRIOR TO POWERING ON UNIT NOTES: () LL ONNETION RE /4" NPT UNLESS OTHERWISE SPEIFIED. (2) SEE DRWING DD-TYP4P-TL-050 FOR THE NITROGEN GENERTORS DESIGN DT. (3) FOR NHORING OMPONENTS IN PLE USE LOL/SITE ODES. (4) DDITIONL ESSORY OPTIONS NOT SHOWN WITHIN THIS DRWING THT MY E PURHSED FROM STS RE S FOLLOWS; 4-TL-0, REGULTOR KIT, 4-TL-02, PLUMING INSTLLTION KIT, 4-TL-04, INSTLLTION KIT FOR DDITIONL TRNSMISSION LINES, 4-TL-05, HIGH PRESSURE K YLINDER REGULTOR KIT, 4-TL-06, PRESSURE GUGE FOR DDITIONL TRNSMISSION LINES, ND 4-TL-GS, GS SMPLE INSTLLTION KIT. 02-0 00 - REV ER# SHEET GENERL DRWING UPDTE MODIFIED OVERL STNDRD INITIL DRWING RELESE DESRIPTION 05/04/206 02/2/206 DRWN PPR. REVISIONS: ONLY THE LTEST 3 REVISIONS WILL E SHOWN. OLDER REVISIONS ONSOLIDTED ND FILED. DTE 0/9/205 PROPRIETRY ND ONFIDENTIL THE INFORMTION ONTINED IN THIS DRWING IS THE SOLE PROPERTY OF SOUTH-TEK SYSTEMS. NY REPRODUTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF SOUTH-TEK SYSTEMS IS PROHIITED. MTERIL: FINISH: TL-050 GENERL RRNGEMENT WEIGHT: PROJET NME: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WHOLE NUMER DIM's: ONE DE.:.2, TWO DE.:.02 THREE DE.:.005, NG.:.05 OMMERIL GENERL SSEMLY DRWINGS NUMER: DRWN: PPROVED: DTE: DTE: 02/7/6 02/7/6 SIZE: SLE: SHEET: :0 OF REVISION: G-TYP4P-TL-050 02 8 7 6 5 4 3 2 D -
D 7 TL-725 & TL-2625 INSTLLTION SHEMTI 8 7 6 5 4 3 2 TEE WILL E INSTLLED ND SUPPLIED Y OTHERS IF KUP YLINDER IS INSTLLED ITEM# STS PRT# DESTIPTION OPTIONL / STNDRD TL-725TS NITROGEN GENERTOR STNDRD 2 2222-0XXX- STS-NF--3-J OMPRESSOR OPTIONL 3 2222-039 RD-0 IR DRYER OPTIONL NITROGEN OUT TO TRNSMISSION TOWER STS REOMMENDS INSTLLING KUP YLINDER (SUPPLIED Y OTHERS) WITH HIGH PRESSURE REGULTOR SET TO 30 PSIG (STS OPTIONL PRT# 4-TL-05) OPTIONL PLUMING KIT ETWEEN EQUIPMENT (STS PRT# 4-TL-03) 3 TNK ND DRYER DRIN LINES N E PLUMED TO SITE DRIN FILTER DRIN LINES N E PLUMED TO SITE DRIN NOTES: () LL ONNETION RE /4" NPT UNLESS OTHERWISE SPEIFIED. (2) SEE DRWING DD-TYP3P-TL725TS FOR THE NITROGEN GENERTORS DESIGN DT. (3) SEE DRWING 0-TL-02 FOR THE 60# TNK SSEMLY DESIGN DT. (4) FOR OMPRESSOR ND DRYER DESIGN DT SEE DRWINGS 2222-039, ND 2222-0XXX-. (5) SEE SHEET 2 FOR ISO VIEW. (6) FOR NHORING OMPONENTS IN PLE USE LOL/SITE ODES. (7) DDITIONL ESSORY OPTIONS NOT SHOWN WITHIN THIS DRWING THT MY E PURHSED FROM STS RE S FOLLOWS; 4-TL-0, REGULTOR KIT, 4-TL-03, PLUMING INSTLLTION KIT, 4-TL-04, INSTLLTION KIT FOR DDITIONL TRNSMISSION LINES, 4-TL-05, HIGH PRESSURE K YLINDER REGULTOR KIT, 4-TL-06, PRESSURE GUGE FOR DDITIONL TRNSMISSION LINES, ND 4- TL-GS, GS SMPLE INSTLLTION KIT. 02-0 00 - REV ER# SHEET GENERL DRWING UPDTE MODIFIED OVERLL STNDRD INITIL DRWING RELESE DESRIPTION 05/04/206 02/5/206 DRWN PPR. REVISIONS: ONLY THE LTEST 3 REVISIONS WILL E SHOWN. OLDER REVISIONS ONSOLIDTED ND FILED. DTE 02/9/205 PROPRIETRY ND ONFIDENTIL THE INFORMTION ONTINED IN THIS DRWING IS THE SOLE PROPERTY OF SOUTH-TEK SYSTEMS. NY REPRODUTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF SOUTH-TEK SYSTEMS IS PROHIITED. MTERIL: FINISH: WEIGHT: PROJET NME: UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES WHOLE NUMER DIM's: ONE DE.:.2, TWO DE.:.02 THREE DE.:.005, NG.:.05 TL-725 GENERL RRNGEMENT OMMERIL GENERL SSEMLY DRWINGS NUMER: DRWN: DTE: 02/5/6 PPROVED: DTE: 02/6/6 SIZE: SLE: SHEET: :2 OF 2 REVISION: G-TYP3P-TL725 02 8 7 6 5 4 3 2 D - 2
8 South-Tek Systems Warranties WE DESIGN EST IN LSS, DEPENDLE NITROGEN GENERTION SYSTEMS. IT ONLY SEEMS RIGHT TO OFFER WRRNTY TO MTH. N 2-GEN Nitrogen Generators South-Tek Systems warrants to the purchaser that all Nitrogen generators and other products manufactured by South-Tek Systems shall be free of defects in material and workmanship for a period of one () year from the date of shipment to the purchaser or within,000 hours of runtime, whichever comes first (per South-Tek Systems Terms & onditions). The South-Tek Systems warranty only applies to products manufactured by South-Tek Systems. STS-NF--J Series ir ompressor Packages 2 The STS-NF--J Series ir ompressor Packages are warranted for one () year from date of purchase. The manufacturer will repair, without charge, any defects due to faulty materials or workmanship. This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces. RD Series ir Dryer Packages 2 The RD Series ir Dryer Packages have a one () year warranty against defects in materials or workmanship under normal use and service, from the date of installation or eighteen (8) months from the date of shipment by the manufacturer or a manufacturer s distributor, whichever may occur first. Heat Exchangers are warranted for five (5) years. Per South-Tek Systems Terms and onditions 2 Per the Manufacturer s Terms and onditions www.southteksystems.com commercialsales@southteksystems.com 888.526.6284 South-Tek Systems