WWW.STREETRODBRACKETRY.COM 1-866-330-0428 / 817-614-9659 Bracket Kits & Accessories When details matter A/C, ALT, P/S Brackets & Accessories Aluminum & steel fabricated bracket sets V-belt & multi-groove setups Alternators, compressors P/S pumps, pulleys, belts Date: 9/15/2010
Page 2 To Order Call: (817) 614-9659 Or 1-866-330-0428 Power Steering Brackets 201-P steel P/S bracket kit, small block Chevy, short water pump, use with GM type II P/S pump, mounts low on driver side. Requires 3 grv C/S pulley and runs in 3 rd outer grv or add on GM crankshaft pulley #1232P, available separately. P/S pump requires V-belt pulley #4625P, available separately. Compatible with kits: 1001-B & 1002-B; 2001-B thru 2004-B 201-P natural $85.00 201-PP black, pwd. coat $95.00 202-P billet aluminum P/S bracket kit, small block Chevy, short water pump, use with GM type II pump, low mount driver's side. Requires 3 grv C/S pulley and runs in 3 rd outer grv or add on GM C/S pulley #1232P, available separately. P/S pump requires V-belt pulley #4625P, available separately. Compatible with kits 1001-B, 1002-B & 1003-B 202-PP polished $147.95 202-PM machined $121.95 203-P steel P/S bracket kit, small block Chevy, short water pump, use with GM metric P/S pump, low mount driver's side. Requires 3 grv C/S pulley and runs in 3 rd outer grv or add on GM crankshaft pulley #1232P available separately. P/S pump requires V-belt pulley #0150P, available separately. Compatible with kits: 1001-B & 1002-B; 2001-B thru 2004-B 203-P natural $65.00
www.streetrodbracketry.com 1-866-330-0428 / 817-614-9659 Page 3 Power Steering Brackets cont. 204-P steel P/S bracket kit, small block Chevy, short reverse rotation pump, use with GM type II pump, mid-mount driver's side, multi -groove belt GM 1989-2007 pump Compatible with kits: 1004-B & 1005-B 2007-B thru 2010-B 204-P natural $80.00 204-PC chrome $99.95 250-P steel P/S bracket kit, small block Chevy, long water pump, use with GM Saginaw metric pump, low mount driver's side. Runs in rear grv of 3 grv C/S pulley. Requires 2 grv P/S pump pulley #4343P available separately. Same as 203-p with different spacing Compatible with kits: 1101-B & 1102-B 250-p natural $65.00
Page 4 To Order Call: (817) 614-9659 Or 1-866-330-0428 Aluminum A/C & Alternator Brackets / V Belt 1001-B billet aluminum A/C & Alternator bracket kit for small block Chevy / short water pump, 508 compressor and GM 10SI alternator, close top-mount, v-belt, (cyl. head year models: 69 & up) 1001-BP polished $328.95 1001-BM machined $285.95 1002-B billet aluminum A/C & Alternator bracket kit for small block Chevy / short water pump, 508 compressor and GM CS130 alternator, close top-mount, v-belt, (cyl. head year models: 69 & up) 1002-BP polished $328.95 1002-BM machined $285.95 1003 -B billet aluminum A/C & Alternator bracket kit for small block Chevy / short water pump, 508 compressor and CS130 alternator, wide low-mount, v-belt, (cyl head year models: '87 & up) shown w/ 202-P P/S kit 1003-BP polished $328.95 1003-BM machined $285.95
www.streetrodbracketry.com 1-866-330-0428 / 817-614-9659 Page 5 Aluminum A/C & Alternator Brackets / Multi-Groove Belt 1004 -B billet aluminum A/C & Alternator bracket kit for small block Chevy / short reverse rotation pump, 508 compressor and GM 10SI alternator, close top-mount, multi -groove belt, (includes pulley set: 6750-6SP-kit) Shown w/ 204-P P/S kit 1004-BP polished $578.90 1004-BM machined $493.90 1005-B billet aluminum A/C & Alternator bracket kit for small block Chevy / short reverse rotation pump, 508 compressor and GM CS130 alternator, close top-mount, multi-groove belt, (includes pulley set: 6750-6SP-kit) Shown w/ optional belt route 1005-BP polished $578.90 1005-BM machined $493.90 We believe the functionality, durability, and unique aesthetics of our aluminum brackets set us apart from the rest of the industry. We use aircraft quality 6061-T6 aluminum. We then profile and machine the parts 360 degrees to completely remove the exterior factory surface to insure a top quality finish. Two finishes are available. Polished: reveals a quality finish. Machined: This finish allows you to polish the brackets yourself, have them chromed, painted, or powdercoated to match your engine.
Page 6 To Order Call: (817) 614-9659 Or 1-866-330-0428 Aluminum A/C & Alternator Brackets / Long Water Pump 1101-B billet aluminum A/C & Alternator bracket kit for small block Chevy / long water pump, 508 compressor and GM 10SI alternator, close top-mount, v-belt, (cyl. head year models: 69 & up) 1101-BP polished $339.95 1101-BM machined $298.95 1102-B billet aluminum A/C & Alternator bracket kit for small block Chevy / long water pump, 508 compressor and GM CS130 alternator, close top-mount, v-belt, (cyl. head year models: 69 &up) 1102-BP polished $339.95 1102-BM machined $298.95 Put your pry bar back in the tool box. Belt adjustment is simple and easy with our stainless steel adjusting bars. If you are building a narrow hood car, and have side clearance issues, these brackets are your solution. When details matter, we ve got you covered.
www.streetrodbracketry.com 1-866-330-0428 / 817-614-9659 Page 7 Steel A/C & Alternator Brackets / Short Water Pump 2001-B steel A/C & Alternator bracket kit for small block Chevy / short water pump, Sanden 508 compressor, GM 10SI alternator, S/S crossed adjusting bars, v-belt, No head bolt holes required 2001-B natural $189.95 2001-BP black, pwd. coat $199.95 2002-B steel A/C & Alternator bracket kit for small block Chevy / short water pump, Sanden 508 compressor, GM 10SI alternator, S/S straight adjusting bars, v-belt, No head bolt holes required 2002-B natural $189.95 2002-BP black, pwd. coat $199.95 2003-B steel A/C & Alternator bracket kit for small block Chevy / short water pump, Sanden 508 compressor, GM CS-130 alternator, S/S crossed adjusting bars, v-belt, No head bolt holes required 2003-B natural $189.95 2003-BP black, pwd. coat $199.95 2004-B steel A/C & Alternator bracket kit for small block Chevy / short water pump, Sanden 508 compressor, GM CS-130 alternator, S/S straight adjusting bars, v-belt, No head bolt holes required 2004-B natural $189.95 2004-BP black, pwd. coat $199.95
Page 8 To Order Call: (817) 614-9659 Or 1-866-330-0428 Steel A/C & Alternator Brackets / Multi-groove 2007-B steel A/C & Alternator bracket kit for small block Chevy / short reverse rotation pump, Sanden 508 compressor, GM 10SI alternator, S/S crossed adjusting bars, multi-groove belt, (includes pulley set: 6750-6SP-kit) (Pictured with CS130 alt) 2007-BNU natural, unpolished pulleys $397.90 2007-BNP natural, polished pulleys $445.90 2007-BPU pwd coat, unpolished pulleys $407.90 2007-BPP pwd coat, polished pulleys $455.90 SAME AS ABOVE EXCEPT WITH STRAIGHT ADJUSTING BARS 2008-B steel A/C & Alternator bracket kit for small block Chevy / short reverse rotation pump, Sanden 508 compressor, GM 10SI alternator, S/S straight adjusting bars, multi-groove belt (includes pulley set: 6750-6SP-kit) 2008-BNU natural, unpolished pulleys $397.90 2008-BNP natural, polished pulleys $445.90 2008-BPU pwd coat, unpolished pulleys $407.90 2008-BPP pwd coat, polished pulleys $455.90 2009-B steel A/C & Alternator bracket kit for small block Chevy / short reverse rotation pump, Sanden 508 compressor, GM CS-130 alternator, S/S crossed adjusting bars, multi-groove belt, (includes pulley set: 6750-6SP-kit) 2009-BNU natural, unpolished pulleys $397.90 2009-BNP natural, polished pulleys $445.90 2009-BPU pwd coat, unpolished pulleys $407.90 2009-BPP pwd coat, polished pulleys $455.90 SAME AS ABOVE EXCEPT WITH STRAIGHT ADJUSTING BARS 2010-B steel A/C & Alternator bracket kit for small block Chevy / short reverse rotation pump, Sanden 508 compressor, GM CS-130 alternator, S/S straight adjusting bars, multi-groove belt (includes pulley set: 6750-6SP-kit) 2010-BNU natural, unpolished pulleys $397.90 2010-BNP natural, polished pulleys $445.90 2010-BPU pwd coat, unpolished pulleys $407.90 2010-BPP pwd coat, polished pulleys $455.90
www.streetrodbracketry.com 1-866-330-0428 / 817-614-9659 Page 9 Low Mount Steel Alternator Brackets 2005-A steel Alternator bracket kit for small block Chevy / short water pump, GM 10SI alternator, v-belt From crank/shaft center to side & down 10-1/2" & 6-1/2", adjusted 2005-A natural $85.00 2005-AP black, pwd. coat $95.00 2006-A steel Alternator bracket kit for small block Chevy / short water pump, GM CS-130 alternator, v-belt, From crank/shaft center to side & down 10-1/2" & 5-1/2, adjusted 2006-A natural $85.00 2006-AP black, pwd. coat $95.00
Page 10 Ford Big Block 429 / 460 / 514 3001-B Billet Aluminum A/C, Alternator, & Power Steering kit for the 385 series Big Block Ford 429 / 460 / 514. This kit uses 6061 T6 billet aluminum for the brackets, pulleys, & covers, & stainless steel hardware. A single 6 groove serpentine belt with spring loaded tensioner for proper belt tension & bearing loads. Very compact design for maximum clearance; From C/S center line, it is 10.5 on compressor side & 12.5 on alternator-p/s side. Comes with everything. Sanden SD7 compressor, Delco CS130 105 amp alternator, various amp ratings available. TC type II p/s pump, available w/ or w/o pump mounted reservoir. All pulleys, covers, & hardware. Designed for OEM harmonic balancer; will work w/ aftermarket with pulley bolt change. Designed for OEM or comparable water pump. All you need is an engine with the water pump & harmonic balancer.!!! Call for custom ordering!!! 3001 B polished finish $1650.00 3001-BM machined finish $1450.00
Page 11 Oldsmobile 324 324-B Steel A/C, Alternator, & P/S bracket kit for 1954 thru 1956 324 CI Olds. Uses Sanden 508 compressor, GM CS-130 alternator, TC type II power steering pump, w or w/o pump mounted reservoir. Uses OEM 3 groove water pump & crankshaft / balancer pulleys & OEM exhaust manifolds. Kit comes with all brackets, belts, & hardware. Used pulley & exhaust sets available, when in stock. Brackets sold separately also. 324-B natural $250.00 Chevrolet 216-235 - 261 / 230-250 235-261 PWI - Steel A/C bracket kit for the 1937 thru 1953 216 CI & 1942 thru 1962 235 / 261 CI GM 6 cylinder engines. Mounts 508 compressor stationary, leaves generator in factory position. Generator tensions single belt. Works with 4 bbl or dual carbs. Will not work with 3 carbs. Comes with all hardware. Belt & compressor available separately. 235-261 PWI natural $119.95 230-250 PWI - Steel A/C bracket kit similar to kit above, but for 230 250 CI GM 6 cylinder engines. 230-250 PWI natural $119.95
Page 12 To Order Call: (817) 614-9659 Or 1-866-330-0428 Accessories Alternators A1051CR CS-130 chrome 105 amp $138.50 A1051NR CS-130 natural 105 amp $110.00 (CS-130's: 10, 12, 2 o'clock mounting available) AS100CR 10SI chrome 100 amp $119.95 AS100NR 10SI natural 100 amp $ 89.95 Other amp ratings available Dayco V-Belts Dayco Multi-Groove Belts From $10.00 to $15.00 From $15.00 to $30.00 Compressors Sanden SD7 polished $249.95 Sanden SD7 natural $199.00 Sanden 508 polished $249.95 Sanden 508 natural $199.00 Sanden style 508 chrome $199.95 Sanden style 508 natural $185.00 Pulleys/Steel V-Belt 4043P 6-3/4 dia. 2 grv. C/S pulley $ 51.95 1232P 6-3/4 dia. 1 grv. add-on P/S $ 54.95 1107P bolt on dbl grv. P/S $ 48.95 0150P press on single grv. P/S $ 48.95 5642P 6-1/8 dia. 2 grv. W/P $ 68.95 4343P 5-3/4 dia. press on ¾ shft. dbl. grv. $ 51.95 Custom Aluminum Pulleys / Multi-Groove (works with SRB kits only) 6000 VWP $105.00 6750-6SP (C/S) $105.00 2132-6SP (Alt) & 2132-CVR (Alt cvr) $ 50.00 Set (purchased w/bracket kit, polished alum) $249.95 Set (purchased w/bracket kit, unpolished) $207.95 V-Belt Aluminum pulleys coming soon Available by special order: Engine mount brackets for SB Chevy into 49-54 Chevy cars. Engine mount brackets for SB Ford into 49-51 Ford cars. Call for Details
www.streetrodbracketry.com 1-866-330-0428 / 817-614-9659 Page 13 C U T A L O N G D O T T E D L I N E
Page 14 STREET ROD BRACKETRY 1100 Jaybird Rd. Springtown, TX 76082 Order: 1-866-330-0428 - 8am to 5 pm Mon. Fri. CST Tech: 817-614-9659-8am to 5 pm Mon. Fri. CST www.streetrodbracketry.com Tech customerservice@streetrodbracketry.com ORDER FORM Shipping Address Name Address City State Zip Phone E-Mail CK Preferred Shipping: USPS UPS Next Day 2nd Day Ground Credit Card Info Ck Card Type: VISA DISCOVER M/C Amer./Exp. Name On Card Address City State Zip Credit Card # Exp. Date Personal Check Orders: Order will be shipped as soon as check clears Drivers License # Exp. Date Qty. Part# Description Price ea. Total Price Sub Total Texas Residents Add 8.25% Sales Tax Sales Tax Call 817-614-9659 For Shipping Charges Shipping Charges TOTAL C U T A L O N G D O T T E D L I N E
Page 15 STREET ROD BRACKETRY 1100 Jaybird Rd. Springtown, TX 76082 Order: 1-866-330-0428 - 8am to 5 pm Mon. Fri. CST Tech: 817-614-9659-8am to 5 pm Mon. Fri. CST www.streetrodbracketry.com Tech customerservice@streetrodbracketry.com Warranties: The original manufactures warranty constitutes all of the warranties applied to each non Street Rod Bracketry manufactured item sold. At our option, Street Rod Bracketry will repair or replace any Street Rod Bracketry manufactured item found to be defective in material or workmanship. No monetary refund will be awarded except in the event an incorrect product application was received, then, only if Street Rod Bracketry cannot provide correct application product. Street Rod Bracketry will not be liable for any personal or property damages caused by use or misuse of any product we sell or manufacture. No other warranties are expressed or implied. Returns: All returns must be made within 30 days from purchase date. All returns after 30 days will be charged a 10% restocking fee. No returns accepted after 6 months from purchase date. All returns must have RGA# (return goods authorization; call for RGA#) on shipping label. Must be accompanied with copy of invoice. Must be freight pre-paid. Street Rod Bracketry will only pay return shipping charges in cases of our error. No C.O.D. or missing RGA# packages will be accepted. All returned parts must be in new condition. Parts that have been installed or attempted to install cannot be returned. Freight Damage Claims: Freight damage claims must be made to the carrier. Always inspect shipment immediately upon receipt. Notify delivery driver & have them document any damages. Notify carrier immediately of any damages. Keep all packaging for carriers inspection. Do not return any damaged items until inspected by carrier. Texas Sales Tax: All products shipped or billed to a Texas address will be charged appropriate Texas sales tax, with the exception of exempt or resale certificate holders.
When details matter Street Rod Bracketry provides car enthusiasts with unique, affordable, and practical automotive accessory mounting options. About Us Street Rod Bracketry is a division of R. D. Tooling, Inc. R. D. Tooling has been in business for eight years, working with a major commercial bracket manufacturer providing machine shop tooling along with design and manufacturing services. A personal passion for building hot rods has resulted in the creation of a unique line of bracket systems for the street rod, hot rod, & muscle car enthusiast. Over 40 years of engineering, repair, and design experience in the automotive and truck industry equips our team to design and produce quality bracket products with the professional hot rod builder as well as the "do-it-your-selfer" in mind. It only makes sense for someone who understands the complexities of building and fabricating necessary support systems to design a clean, unique, functional, and affordable bracket system. We design and build our own bracket products, right here in the UNITED STATES OF AMERICA. Thank you for considering our products WWW.STREETRODBRACKETRY.COM 1-866-330-0428 / 817-614-9659 Street Rod Bracketry C/O R. D. Tooling, Inc. 1100 Jaybird Road Springtown, TX 76082 Phone: (817) 614-9659 E-mail: customerservice@streetrodbracketry.com Prices are subject to change and do not include shipping, handling or applicable sales tax. Return authorization is required. All rights reserved.