SNE Series Hybrid security network enclosure configured specifically to address the needs of hybrid security systems consisting of a mix of analog and digital equipment and cabling features: Fully welded construction provides the following weight capacities: UL Listed load capacity 3,000 lbs. Caster load capacity 1,600 lbs. Seismic certified capacity 1,050 lbs. Configurations available with active top (660 CFM) or rear (1,760 CFM) ventilation Ships fully configured, and includes 70% open area vented front door Split solid rear doors Pair of split flush mount locking side panels (2) vertical 10 wide Lever Lock accessory mounting plates 6 wide vertical wire grid lace 4 space cage nut rail adapter Casters Leveling feet Available in 24, 27.6 and 30 widths 36 and 42 overall s Includes 2 pairs of 1032 threaded fully adjustable rackrail Doors accommodate industry standard electronic door locks specifications: EIA compliant 19 gangable hybrid security network enclosure shall be Middle Atlantic Products model # SNE H A_ (refer to chart). Overall dimensions shall be H x W x D (refer to chart). Useable height shall be rackspaces, useable shall be (refer to chart). Fully welded construction shall provide a UL Listed load capacity of 3,000 lbs., and casters shall provide a capacity of 1,600 lbs. SNE shall come equipped with two pairs of fully adjustable steel rackrail with tapped 1032 mounting holes in universal EIA spacing, black ecoat finish and numbered rackspaces. SNE shall include 70% vented front door, split 3point solid rear door, and flush locking split side panels. SNE shall include two 10 wide patentpending Lever Lock tool free accessory mounting plates. SNE shall include one 6 wide vertical grid lace and 4 space cagenut rail adapter. SNE shall have prethreaded 5/16 18 ganging holes. SNE shall be capable of ganging while fully loaded, using bolts only. SNE shall have active cooling, top mounted (660 CFM) or rear door mounted (1,760 CFM), refer to chart. SNE shall have marked rackrail indicators. SNE shall be of fully welded construction. SNE shall be finished in an environmentally friendly, durable black powder coat. SNE Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 705 (2005 Edition) & ASCE 710 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) D with lateral force requirements for protecting 1,050 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with SNEZ4 seismic floor anchor bracket. SNE shall be UL Listed in the US and Canada to the UL2416 (NWIN) category. SNE shall be GREENGUARD Gold Certified. SNE enclosure shall be RoHS EU Directive 2002 / 95 / EC compliant. SNE shall be manufactured by an ISO 9001 and ISO 14001 registered company. SNE enclosure shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the rack. Customizable specification clips available at middleatlantic.com EIA/TIA COMPLIANT options: Split liftoff cable chase shall be 4.4 wide and mount inbetween enclosures, model # SNECC LT (refer to drawing for model number) Cable duct shall be model # SNE DUCT4x6 and be available packaged or installed (refer to chart) Cable chase shall be model # SNE CC1245 (refer to chart), and shall be 12 wide x deep x 83.33 high Front air dam/zerou panel mount shall be model # SNE FADPM (refer to drawing for model #) Bracket for top cable passthrough enclosure to enclosure shall provide the ability to pass cables from enclosure to enclosure when ganged together, and shall be model number SNETCB (36, 42, 48) 6 wide wire type vertical lace shall be model number LACEWB6 (24, 42, 45) Seismic Zone4 and Seismic Use Group III compliancy floor anchor kit shall be model # SNEZ4 what great systems are built on. 9601192 / rev e / 62017
SNE Series Hybrid with active top ventilation basic dimensions (doors removed) top opening (fan top not shown) 27.52 [699] (30" width) 23.12 [587] (27.6" width) 21.52 [547] (24" width) 2 x 4" gland grommet.125 [3] top and bottom holes available for accessory mounting (front air dam, plastic cable management fingers, vertical power strips) 19.91[506] overall (with doors) 19.00 panel width 1032 tapped rackrail left side (side panels/covers removed) right side removable side covers width vented front door 70% open area 35.13 [892] (45sp) 29.88 [759] (42sp) (no opening for 24sp) locking side panels overall height (with casters) frame height channel support for rackrail adjustment and mounting options 35.13 [892] (45sp) 35.13 [892] (42sp) 35.13 [892] (24sp) leveler adjustment.98 [25] min 1.68 [43] max frame bottom view front/rear door(s) opening (top panels removed) (SNE30H4542A1 shown) bottom opening 24.13 [613] (36" ) 30.13 [765] (42" ) 36.13 [918] (48" ) bottom opening 22.26 [565] (24" width) 25.86 [657] (27.6" width) 28.26 [718] (30" width) arrows indicate airflow direction rear view solid rear doors include (8 qty 6" fan) knockouts 660 CFM fan top 1/420 x 1" ground stud split solid rear doors 1.44 [37] caster height Note: Front door, rear door, and side panels are keyed the same 24.00 [609] width 27.60 [701] width 30.00 [762] width Solid Rear Doors Solid Rear with Doors w/ Fan Fan Top Top & Solid Top Overall (w/ casters) 24 space 48.02 [1220] 46.58 [1183] SNE24H2436A1 SNE24D2442A1 yes no 42 space 79.52 [2020] 78.08 [1983] SNE24H4236A1 SNE24D4242A1 SNE27H4236A1 SNE27H4242A1 SNE30H4236A1 SNE30H4242A1 yes no 45 space 84.77 [2153] 83.33 [2117] SNE24H4536A1 SNE24D4542A1 SNE27H4536A1 SNE27H4542A1 SNE30H4536A1 SNE30H4542A1 yes no Useable Overall (with doors) 36.00 [914] 32.48 [825] 37.15 [944] 42.00 [1067] 38.48 [977] 43.15 [1096] 48.00 [1219] 44.48 [1130] 49.15 [1248] what great systems are built on. 2
SNE Series Hybrid with rear active ventilation basic dimensions front/rear door(s) opening (SNE30H4542A2 shown) rack comes with solid top installed with brush sides arrows indicate airflow direction left side (side panels/covers removed) right side rear view width vented front door 70% open area overall height (with casters) solid rear doors with 220 CFM fans installed (1760 CFM total) frame Note: Front door, rear door, and side panels are keyed the same 24.00 [609] width 27.60 [701] width 30.00 [762] width Overall (w/ casters) 24 space 48.02 [1220] 46.58 [1183] SNE24H2436A2 SNE24D2442A2 42 space 79.52 [2020] 78.08 [1983] SNE24H4236A2 SNE24D4242A2 SNE27H4236A2 SNE27H4242A2 SNE30H4236A2 SNE30H4242A2 45 space 84.77 [2153] 83.33 [2117] SNE24H4536A2 SNE24D4542A2 SNE27H4536A2 SNE27H4542A2 SNE30H4536A2 SNE30H4542A2 Useable Overall (with doors) 36.00 [914] 32.48 [825] 37.15 [944] 42.00 [1067] 38.48 [977] 43.15 [1096] 48.00 [1219] 44.48 [1130] 49.15 [1248] what great systems are built on. 3
SNE Series Hybrid basic dimensions side view side view (Lever Lock brackets removed) (wire lace removed) 1.56 [40].97 [25] top cover brackets allow horizontal cable passthrough: SNETCB36 (36" ) SNETCB42 (42" ) SNETCB48 (48" ) 3.67 [93] 7.73 [196] front air dams include knockouts for 1 rackspace 19.00 vertical rackmount (cage nut) 19.00 [483] ref 16.59 [421] mounts 21 vertical Lever Lock Lever Lock brackets 6" wide wire lace attaches to channel supports front air dams available for 27.6" and 30" wide racks additional Lever Lock bracket mount locations Lever Lock mount access 25.35 [644] (36" ) 31.35 [796] (42" ) 37.35 [949] (48" ) Lever Lock detail LLVP2110 shown (2 qty included) 9.85 [250] 2x.50 [13] Ø1.3 [33] X 7.5 [191] IKO cable ladder mounting available top cable chase: SNECC36LT (36" ) SNECC42LT (42" ) SNECC48LT (48" ) 17.11 [435] 15.86 [403] solid top shown 2x 12.00 x 3.00 cable opening in all top options 4X 3[76] X 2[51] EKO (36" ) 6X 3[76] X 2[51] EKO (42" ) 6X 3[76] X 2[51] EKO (48" ) SNE30H4542A2 shown (front/rear doors removed) 4.50 [114] wide cable chase: SNECC42FB (42SP) SNECC45FB (45SP) vertical cable duct available for 45SP only VCD645SC (6" wide) VCD1045SC (10" wide) what great systems are built on. 4
SNE Series cable duct basic dimensions 7.25 [184] position of rackrail mounting surface to accomodate cable duct see dimensional view of cable duct rack rail front/rear doors removed side view (side panels removed) cable organizer duct 3.69 [94] ref 6.17 [157] cable organizer see table A A overall height removable cover 8x cover clip/hinge 3.69 [94] 3.57 [91] 1.55 [39] typ 1.75 [44] typ 3.31 [84] typ Notes: 1. cable duct can be installed at each inside corner of the rack. 3. cable ducts are only available for 27 and 30 wide racks Cable Duct Part Number Overall Rackspaces SNE42DUCT4X6 70.50 [1791] 42 space SNE45DUCT4X6 75.75 [1924] 45 space what great systems are built on. 5
SNE Series cable chase basic dimensions rear view cable brush openings in all top options 2x 4" gland grommet 3" & 4" electrical laser knockouts see table 1" & 11/2" electrical laser knockouts see table leveler adjustment.98 [25] min 1.68 [43] max right side cable chase side view (without side panels) 12.00 [305] cable chase width cable chase removable side covers 7.73 [196] 83.33 [2117] cable chase frame height 84.76 [2153] cable chase overall height accepts locking side panels leverlock brackets leverlock mount access 25.35 [644] (36" ) 31.35 [796] (42" ) 37.34 [948] (48" ) 16.59 [421] Notes: 1. cable chase shown mounted on a SNE rack enclosure 2. cable chase can be mounted on left or right side of rack additional leverlock bracket mount locations (allocated on both sides) Cable Chase Part Number Cable Chase 1 & 11/2 LKO (Qty) 4 & 5 LKO (Qty) Fits SNE Racks SNECCE124536 36.00 [914] 4 1 SNEXX4536XX SNECCE124542 42.00 [1067] 4 1 SNEXX4542XX SNECCE124548 48.00 [1219] 5 2 SNEXX4548XX what great systems are built on. 6