SNE Series Digital. features: specifications: options: security network enclosure. what great systems are built on.

Transcription

1 SNE Series Digital security network enclosure configured specifically to address the needs of digital (IP) security systems consisting of highdensity cabling, network equipment, and servers features: Fully welded construction provides the following weight capacities: UL Listed load capacity 3,000 lbs. Caster load capacity 1,600 lbs. Seismic certified capacity 1,050 lbs. Configured for front to rear, or front to chimney passive cooling depending on model Ships fully configured, and includes 70% open area vented front door Solid or split 70% open area rear doors Chimney (select models only) Pair of split flush mount locking side panels Set of Lever Lock mounting brackets Casters Leveling feet Available in 24, 27.6 and 30 widths 36, 42 and 48 overall s Includes 2 pairs of cage nut fully adjustable rackrail and 6MM mounting hardware Doors accommodate industry standard electronic door locks shown with chimney Lever Lock specifications: EIA compliant 19 gangable digital security network enclosure shall be Middle Atlantic Products model # SNE D P_ (refer to chart). Overall dimensions shall be H x W x D (refer to chart). Useable height shall be rackspaces, useable shall be (refer to chart). Fully welded construction shall providea UL Listed load capacity of 3,000 lbs., and casters shall provide a capacity of 1,600 lbs. SNE shall come equipped with two pairs of fully adjustable steel cage nut rackrail with 6MM mounting hardware in universal EIA spacing, black ecoat finish and numbered rackspaces. SNE shall include 70% vented front door, rear doors (refer to chart), and flush locking split side panels. SNE shall include pair of Lever Lock mounting brackets. SNE shall have prethreaded 5/16 18 ganging holes. SNE shall be capable of ganging while fully loaded, using bolts only. SNE shall have passive cooling, front to rear. SNE shall have marked rackrail indicators. SNE shall be of fully welded construction. SNE shall be finished in an environmentally friendly, durable black powder coat. SNE Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 705 (2005 Edition) & ASCE 710 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) D with lateral force requirements for protecting 1,050 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with SNEZ4 seismic floor anchor bracket. SNE shall be UL Listed in the US and Canada to the UL2416 (NWIN) category. SNE shall be GREENGUARD Gold Certified. SNE enclosure shall be RoHS EU Directive 2002 / 95 / EC compliant. SNE shall be manufactured by an ISO 9001 and ISO registered company. SNE enclosure shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the rack. Customizable specification clips available at middleatlantic.com EIA/TIA COMPLIANT options: Split liftoff cable chase shall be 4.4 wide and mount inbetween enclosures, model # SNECC LT (refer to drawing for model number) Cable duct shall be model # SNE DUCT4X6 and be available packaged or installed (refer to chart) Cable chase shall be model # SNE CC1245 (refer to chart), and shall be 12 wide x deep x high Front air dam/zerou panel mount shall be model # SNE FADPM (refer to drawing for model #) Bracket for top cable passthrough enclosure to enclosure shall provide the ability to pass cables from enclosure to enclosure when ganged together, and shall be model number SNETCB (36, 42, 48) 6 wide wire type vertical lace shall be model number LACEWB6 (24, 42, 45) Seismic Zone4 and Seismic Use Group III compliancy floor anchor kit shall be model # SNE Z4 (24,27,30) / rev g / 42318

2 SNE Series Digital basic dimensions (doors removed) (tops and side covers removed) top opening (side covers installed) [525] (24" width) [617] (27.6" width) [678] (30" width) 2 x 4" gland grommet top opening [644] (36" ) [796] (42" ) [948] (48" ) top opening [565] (24" width) [657] (27.6" width) [718] (30" width) holes available for accessory mounting (front air dam, plastic cable management fingers, vertical power strips) [506] overall (with doors) left side right side (side panels/covers removed) width vented front door 70% open area [892] (45sp) [759] (42sp) (no opening for 24sp) channel support for rackrail adjustment and mounting options [892] (45sp) [892] (42sp) [892] (24sp) vented rear doors 70% total area 1.44 [37] caster height front/rear door(s) opening (top panels removed) (SNE30D4542P1 shown) 145 bottom opening [613] (36" ) [765] (42" ) [918] (48" ) bottom opening [565] (24" width) [657] (27.6" width) [718] (30" width) rear view leveler adjustment.98 [25] min 1.68 [43] max frame bottom view panel width 6MM cage nut rackrail locking side panels overall height (with casters) frame height removable side covers.125 [3] top and bottom 145 1/420 x 1" ground stud 145 arrows indicate airflow direction Note: Front door, rear door, and side panels are keyed the same [609] width [701] width [762] width Overall (w/ casters) 36.0 [914] 36.0 [914] 36.0 [914] Vented Doors & Solid Top Solid Rear Doors w/ Chimney 24 space [1220] [1183] SNE24D2436P1 SNE24D2442P1 yes no 42 space [2020] [1983] SNE24D4236P1 SNE24D4242P1 SNE24D4248P1 SNE27D4236P1 SNE27D4242P1 SNE27D4248P1 SNE30D4236P1 SNE30D4242P1 SNE30D4248P1 yes no 45 space [2153] [2117] SNE24D4536P1 SNE24D4542P1 SNE24D4548P1 SNE27D4536P1 SNE27D4542P1 SNE27D4548P1 SNE30D4536P1 SNE30D4542P1 SNE30D4548P1 yes no Useable Overall (with doors) [914] [825] [944] [1067] [977] [1096] [1219] [1130] [1248] what great systems are built on. 2

3 SNE Series Digital with top passive chimney ventilation panels interchangeable for chimney location [587] outside see detail A 12.41[315] (42" d) [468] (48" d) [438] min [838] max reference vented front door 70% open area overall height detail a arrows indicate airflow direction adjustment range 1.18 [30] to 1.94 [49] accomodates width 3u panel split solid rear doors (8 qty 6" fans knockouts included on doors) Note: Front door, rear door, and side panels are keyed the same solid base bottom with 2.50 x brush cable entry available ("p2" model only) Rackspaces Overall [609] width [701] width [762] width Vented Doors & Solid Top Solid Rear Doors w/ Fan Top & Solid Top 42 space 45 space [2458] min [2858] max [2591] min [2991] max [1983] [2117] SNE24D4242P2 SNE24D4248P2 SNE27D4242P2 SNE27D4248P2 SNE30D4242P2 SNE30D4248P2 no yes SNE24D4542P2 SNE24D4548P2 SNE27D4542P2 SNE27D4548P2 SNE30D4542P2 SNE30D4548P2 no yes Useable Overall (with casters) [1067] [977] [1096] [1219] [1130] [1248] 3

4 SNE Series Digital basic dimensions side view (wire lace removed) top cover brackets allow horizontal cable passthrough: SNETCB36 (36" ) SNETCB42 (42" ) SNETCB48 (48" ) 3.67 [93] front air dams include knockouts for 1 rackspace vertical rackmount (cagenut) 7.73 [196] [483] ref [421] mounts 21" vertical Lever Lock Lever Lock brackets front air dams available for 27.6" and 30" wide racks additional Lever Lock bracket mount locations Lever Lock mount access [644] (36" ) [796] (42" ) [949] (48" ) Ø1.3 [33] X 7.5 [191] IKO cable ladder mounting available top cable chase: SNECC36LT (36" ) SNECC42LT (42" ) SNECC48LT (48" ) solid top shown 2x x 3.00 cable opening in all top options 4X 3[76] X 2[51] EKO (36" ) 6X 3[76] X 2[51] EKO (42" ) 6X 3[76] X 2[51] EKO (48" ) SNE30D4542P1 shown (front/rear doors removed) 4.50 [114] wide cable chase: SNECC42FB (42SP) SNECC45FB (45SP) vertical cable duct available for 45SP only VCD645SC (6" wide) VCD1045SC (10" wide) what great systems are built on. 4

5 SNE Series cable duct basic dimensions 7.25 [184] position of rackrail mounting surface to accomodate cable duct see dimensional view of cable duct rack rail front/rear doors removed side view (side panels removed) cable organizer duct 3.69 [94] ref 6.17 [157] cable organizer see table A A overall height removable cover 8x cover clip/hinge 3.69 [94] 3.57 [91] 1.55 [39] typ 1.75 [44] typ 3.31 [84] typ Notes: 1. cable duct can be installed at each inside corner of the rack. 3. cable ducts are only available for 30 wide racks Cable Duct Part Number Overall Rackspaces SNE42DUCT4X [1791] 42 space SNE45DUCT4X [1924] 45 space 5

6 SNE Series cable chase basic dimensions rear view cable brush openings in all top options 2x 4" gland grommet 3" & 4" electrical laser knockouts see table 1" & 11/2" electrical laser knockouts see table leveler adjustment.98 [25] min 1.68 [43] max right side cable chase side view (without side panels) [305] cable chase width cable chase removable side covers 7.73 [196] [2117] cable chase frame height [2153] cable chase overall height accepts locking side panels leverlock brackets leverlock mount access [644] (36" ) [796] (42" ) [948] (48" ) [421] Notes: 1. cable chase shown mounted on a SNE rack enclosure 2. cable chase can be mounted on left or right side of rack additional leverlock bracket mount locations (allocated on both sides) Cable Chase Part Number Cable Chase 1 & 11/2 LKO (Qty) 4 & 5 LKO (Qty) Fits SNE Racks SNECCE [914] 4 1 SNEXX4536XX SNECCE [1067] 4 1 SNEXX4542XX SNECCE [1219] 5 2 SNEXX4548XX 6