Deep Grooving Insert Nomenclature hart VDG 125 008 vee-bottom deep grooving insert height.250.337 chipbreaker GOOVING groove idth Inch Metric.125 3,18.156 3,96.188 4,78.218 5,54.250 6,35.312 7,92.375 9,53 VDG corner radius Inch Metric.008 0,2.010 0,25.015 0,4.031 0,8 grade edge prep Description EDP ode Inch Metric 78 VDG-125-008 88212508.125 3,18.008.500.250 90 VDG-125-015 82125.125 3,18.015.500.250 90 VDG-156-008 8215608.156 3,96.008.500.250 90 VDG-156-015 82156.156 3,96.015.500.250 90 VDG-188-008 8218808.188 4,78.008.500.250 90 VDG-188-015 82188.188 4,78.015.500.250 90 VDG-188-031 8218831.188 4,78.031.500.250 90 VDG-218-015 82218.218 5,54.015.500.250 90 VDG-250-015 82250.250 6,35.015.500.337 90 VDG-250-031 8225031.250 6,35.031.500.337 90 VDG-312-015 82312.312 7,92.015.500.337 90 VDG-312-031 8231231.312 7,92.031.500.337 90 VDG-375-015 82375.375 9,53.015.500.337 90 VDG-375-031 8237531.375 9,53.031.500.337 90 VDG- /patented chipbreaker Exclusive patented design! Description EDP ode Inch Metric VDG-125-008- 8212508.125 3,18.008.500.250 90 VDG-125-015- 82125.125 3,18.015.500.250 90 VDG-156-008- 8215608.156 3,96.008.500.250 90 VDG-156-015- 82156.156 3,96.015.500.250 90 VDG-188-008- 8218808.188 4,78.008.500.250 90 VDG-188-015- 82188.188 4,78.015.500.250 90 VDG-188-031- 8218831.188 4,78.031.500.250 90 VDG-218-015- 82218.218 5,54.015.500.250 90 VDG-250-015- 82250.250 6,35.015.500.337 90 VDG-250-031- 8225031.250 6,35.031.500.337 90 VDG-312-015- 82312.312 7,92.015.500.337 90 VDG-312-031- 8231231.312 7,92.031.500.337 90 VDG-375-015- 82375.375 9,53.015.500.337 90 VDG-375-031- 8237531.375 9,53.031.500.337 90 In an effort to improve our stock standard grade offering, ast Iron igh performance choice in optimal conditions. there are periodic changes. Non-errous Please see current price list for up -to- date grade offering. ecommended grade under general conditions. Stainless/igh Temp Steel
VDG METI Description EDP ode Metric Inch VDG-3M-02 823M02 3,00.118 0,2 12,7 6,35 90 VDG-3M-04 823M04 3,00.118 0,4 12,7 6,35 90 VDG-4M-02 824M02 4,00.157 0,2 12,7 6,35 90 VDG-4M-04 824M04 4,00.157 0,4 12,7 6,35 90 VDG-5M-02 825M02 5,00.197 0,2 12,7 6,35 90 VDG-5M-04 825M04 5,00.197 0,4 12,7 6,35 90 VDG-6M-04 826M04 6,00.236 0,4 12,7 8,55 90 VDG-6M-08 826M08 6,00.236 0,8 12,7 8,55 90 VDG-8M-04 828M04 8,00.315 0,4 12,7 8,55 90 VDG-8M-08 828M08 8,00.315 0,8 12,7 8,55 90 VDG- METI /patented chipbreaker Exclusive patented design! Description EDP ode Metric Inch VDG-3M-02-823M02 3,00.118 0,2 12,7 6,35 90 VDG-3M-04-823M04 3,00.118 0,4 12,7 6,35 90 VDG-4M-02-824M02 4,00.157 0,2 12,7 6,35 90 VDG-4M-04-824M04 4,00.157 0,4 12,7 6,35 90 VDG-5M-02-825M02 5,00.197 0,2 12,7 6,35 90 VDG-5M-04-825M04 5,00.197 0,4 12,7 6,35 90 VDG-6M-04-826M04 6,00.236 0,4 12,7 8,55 90 VDG-6M-08-826M08 6,00.236 0,8 12,7 8,55 90 VDG-8M-04-828M04 8,00.315 0,4 12,7 8,55 90 VDG-8M-08-828M08 8,00.315 0,8 12,7 8,55 90 In an effort to improve our stock standard grade offering, there are periodic changes. Please see current price list for up -to- date grade offering. EXTEN STIGT ODE EDVO/ holders use components D.O.. igh performance choice in optimal conditions. ecommended grade under general conditions. SON ast Iron Non-errous Stainless/igh Temp Steel GOOVING Most holders available ith coolant port (ie: dd P to end of description) lamp nvil Description EDP ode Scre Scre EDVO-16 91951600 1 1 5.190 1.150 S90 S95 EDVO-16 91901600 1 1 5.190 1.150 S90 S95 EDVO-20 91952000 1-1/4 1-1/4 5.190 1.150 S90 S95 EDVO-20 91902000 1-1/4 1-1/4 5.190 1.150 S90 S95 EDVO-24 91952400 1-1/2 1-1/2 5.190 1.400 S90 S95 EDVO-24 91902400 1-1/2 1-1/2 5.190 1.400 S90 S95 *The dimension is determined by the D.O.. of the anvil. METI lamp nvil Description EDP ode Scre Scre EDVO-25M 91962500 25,0 25,0 132,0 28,5 S90 S95 EDVO-25M 91912500 25,0 25,0 132,0 28,5 S90 S95 EDVO-32M 91963200 32,0 32,0 132,0 28,5 S90 S95 EDVO-32M 91913200 32,0 32,0 132,0 28,5 S90 S95 EDVO-40M 91964000 40,0 40,0 132,0 36,0 S90 S95 EDVO-40M 91914000 40,0 40,0 132,0 36,0 S90 S95 *The dimension is determined by the D.O.. of the anvil. 79
OMPONENTS DG/ nvils for EDVO/ D.O...O.. SON GOOVING Description EDP ode Insert DO O lamp DG-113 9263113 VDG 1.250.125 DG-132 DG-113 9262113 VDG 1.250.125 DG-132 DG-138 9263138 VDG 1.375.170-.188 DG-382 DG-138 9262138 VDG 1.375.170-.188 DG-382 DG-248 9263248 VDG 1.500.218 DG-482 DG-248 9262248 VDG 1.500.218 DG-482 DG-258 9263258 VDG 1.500.250-.312 DG-500 DG-258 9262258 VDG 1.500.250-.312 DG-500 DG-268 9263268 VDG 1.750.350-.375 DG-582 DG-268 9262268 VDG 1.750.350-.375 DG-582 GT Double ended Exclusive TOO-O design! E GGE DI. T Description EDP ode Inch Metric T E Dia GT-3094 6332094.094 2,39.005/.010.195.275.344.855.3750 GT-3094 6332094.094 2,39.005/.010.195.275.344.855.3750 GT-3125 6332125.125 3,18.005/.010.195.437.344.855.3750 GT-3125 6332125.125 3,18.005/.010.195.437.344.855.3750 GT-3189 6332189.189 4,80.020/.025.195.437.344.855.3750 GT-3189 6332189.189 4,80.020/.025.195.437.344.855.3750 GT-4125 6342125.125 3,18.005/.010.255.550.453 1.136.3750 GT-4125 6342125.125 3,18.005/.010.255.550.453 1.136.3750 GT-4189 6342189.189 4,80.020/.025.255.550.453 1.136.3750 GT-4189 6342189.189 4,80.020/.025.255.550.453 1.136.3750 GT-4250 6342250.250 6,35.020/.025.255.550.453 1.136.3750 GT-4250 6342250.250 6,35.020/.025.255.550.453 1.136.3750 Gage METI Gage Description EDP ode Metric Inch T E Dia GT-330 633230 3,00.118.005/.010.195.275.344.855.3750 GT-330 633230 3,00.118.005/.010.195.275.344.855.3750 GT-340 633240 4,00.157.005/.010.195.437.344.855.3750 GT-340 633240 4,00.157.005/.010.195.437.344.855.3750 GT-450 6344250 5,00.197.020/.025.255.550.453 1.136.3750 GT-450 6344250 5,00.197.020/.025.255.550.453 1.136.3750 GT-460 6344260 6,00.236.020/.025.255.550.453 1.136.3750 GT-460 6344260 6,00.236.020/.025.255.550.453 1.136.3750 T ull Nose adius - Double ended 80 Exclusive TOO-O design! Gage Description EDP ode Inch Metric T E Dia T-3062 6337062.125 3,18.062.195.437.344.855.3750 T-3062 6337062.125 3,18.062.195.437.344.855.3750 T-3094 6337094.189 4,80.094.195.437.344.855.3750 T-3094 6337094.189 4,80.094.195.437.344.855.3750 T-4062 6347062.125 3,18.062.255.550.453 1.136.3750 T-4062 6347062.125 3,18.062.255.550.453 1.136.3750 T-4094 6347094.189 4,80.094.255.550.453 1.136.3750 T-4094 6347094.189 4,80.094.255.550.453 1.136.3750 T-4125 6347125.250 6,35.125.255.550.453 1.136.3750 T-4125 6347125.250 6,35.125.255.550.453 1.136.3750 In an effort to improve our stock standard grade offering, there are periodic changes. Please see current price list for up to date grade offering. E GGE DI. T igh performance choice in optimal conditions. ecommended grade under general conditions. ast Iron Non-errous Stainless/igh Temp Steel
EXTEN ODE S/T or double ended GT/T inserts Inch Exclusive TOO-O design! Most holders available ith coolant port (ie: dd P to end of description) D SON lamp Description EDP ode Insert D lamp Scre ST-163D 93431616D GT-3 1.000 1.000 6.000.440 1.250 T-72 S-412 ST-163D 93421616D GT-3 1.000 1.000 6.000.440 1.250 T-73 S-412 ST-203D 93432016D GT-3 1.250 1.250 6.000.440 1.500 T-72 S-412 ST-203D 93422016D GT-3 1.250 1.250 6.000.440 1.500 T-73 S-412 ST-164D 93431620D GT-4 1.000 1.000 6.000.560 1.250 T-72 S-412 ST-164D 93421620D GT-4 1.000 1.000 6.000.560 1.250 T-73 S-412 ST-204D 93432020D GT-4 1.250 1.250 6.000.560 1.500 T-72 S-412 ST-204D 93422020D GT-4 1.250 1.250 6.000.560 1.500 T-73 S-412 METI lamp Description EDP ode Insert D lamp Scre ST-2525M3 934325M16 GT/T-3 25,0 25,0 152,4 11,2 32,0 T-72 S-412 ST-2525M3 934225M16 GT/T-3 25,0 25,0 152,4 11,2 32,0 T-73 S-412 ST-3232M3 934332M16 GT/T-3 32,0 32,0 152,4 11,2 40,0 T-72 S-412 ST-3232M3 934232M16 GT/T-3 32,0 32,0 152,4 11,2 40,0 T-73 S-412 ST-2525M4 934325M20 GT/T-4 25,0 25,0 152,4 14,2 32,0 T-72 S-412 ST-2525M4 934225M20 GT/T-4 25,0 25,0 152,4 14,2 32,0 T-73 S-412 ST-3232M4 934332M20 GT/T-4 32,0 32,0 152,4 14,2 40,0 T-72 S-412 ST-3232M4 934232M20 GT/T-4 32,0 32,0 152,4 14,2 40,0 T-73 S-412 3 GOOVING E/T or double ended GT/T inserts Exclusive TOO-O design! D 3 Most holders available ith coolant port (ie: dd P to end of description) SON Description EDP ode Insert D lamp Scre ET-163D 93111616D GT-3 1.000 1.000 6.000.440 1.250 T-72 S-412 ET-163D 93011616D GT-3 1.000 1.000 6.000.440 1.250 T-73 S-412 ET-203D 93112016D GT-3 1.250 1.250 6.000.440 1.500 T-72 S-412 ET-203D 93012016D GT-3 1.250 1.250 6.000.440 1.500 T-73 S-412 ET-164D 93111620D GT-4 1.000 1.000 6.000.560 1.250 T-72 S-412 ET-164D 93011620D GT-4 1.000 1.000 6.000.560 1.250 T-73 S-412 ET-204D 93112020D GT-4 1.250 1.250 6.000.560 1.500 T-72 S-412 ET-204D 93012020D GT-4 1.250 1.250 6.000.560 1.500 T-73 S-412 lamp 81
GOOVING INTEN _E/T or double ended GT/T inserts Inch Most holders available ith coolant port (ie: dd P to end of description) Description EDP ode Insert D ore lamp Scre 20-ET3 96552016 GT/T-3 1.250 6.000 1.082 1.807 T-72 S-412 20-ET3 96452016 GT/T-3 1.250 6.000 1.082 1.807 T-73 S-412 24-ET3 96552416 GT/T-3 1.500 6.000 1.207 2.057 T-72 S-412 24-ET3 96452416 GT/T-3 1.500 6.000 1.207 2.057 T-73 S-412 28-ET4 96552820 GT/T-4 1.750 6.000 1.500 2.475 T-72 S-412 28-ET4 96452820 GT/T-4 1.750 6.000 1.500 2.475 T-73 S-412 METI Exclusive TOO-O design! 3 SON Min. lamp Description EDP ode Insert D ore lamp Scre 32M-ET3 96442016 GT/T-3 32,0 152,4 27,48 46,0 T-72 S-412 32M-ET3 96432016 GT/T-3 32,0 152,4 27,48 46,0 T-73 S-412 40M-ET3 96442416 GT/T-3 40,0 152,4 31,60 54,15 T-72 S-412 40M-ET3 96432416 GT/T-3 40,0 152,4 31,60 54,15 T-73 S-412 50M-ET4 96442820 GT/T-4 50,0 152,4 40,87 68,43 T-72 S-412 50M-ET4 96432820 GT/T-4 50,0 152,4 40,87 68,43 T-73 S-412 D Min. lamp ecommended SM & IP for Deep Grooving pplications orkpiece Group TiN PVD oated ltin PVD oated T3 T50 eed/ip Neutral ake hipbreaker ree Machining arbon Steels Plain arbon Steels lloy Steels 190-330 lloy Steels 330-450 Martensitic/erritic Stainless Steel 400 Series ustenitic Stainless 300 Series Gray ast Iron 190-330 Gray ast Iron 330-450 lloy / Ductile Irons ree Machining luminum lloys igh-silicon luminum lloys opper / Zinc / rass Non-Metallics --- 200-400 200-600 250-450 400-800.004-.010.005-.014 --- 200-400 200-600 250-450 400-800.004-.010.005-.014 --- 200-400 200-500 250-400 400-800.004-.010.005-.014 --- 200-350 200-450 250-400 400-750.003-.009.005-.012 --- 200-400 200-500 250-450 350-700.004-.010.005-.014 200-300 200-500 --- 250-700 ---.003-.009.004-.008 100-300 200-600 --- 250-700 ---.004-.010 --- 100-250 200-500 --- 200-600 ---.003-.009 --- 100-250 200-400 200-500 200-450 300-700.004-.010.005-.014 500-1500 300-2000 --- 600-2500 ---.005-.012.008-.016 --- --- --- --- --- --- --- 200-700 200-900 --- 400-1000 ---.005-.012.007-.016 400-1400 300-1500 --- 400-1500 ---.005-.012 --- 82 igh Temperature lloys 200-260 igh Temperature lloys 260-450 Titanium lloys (Ti 6l-4V) 80-130 100-200 --- 100-250 ---.003-.006.004-.007 50-100 100-175 --- 100-200 ---.003-.006.004-.007 100-200 150-300 --- 100-300 ---.003-.006.004-.008 old print items denote the top choices for the materials listed, provided it can be machined ithin the SM stated under the appropriate machining conditions. or the best performance in optimal machining conditions, select the grade that ill provide you ith the highest alloable SM.