D Type A Type DA Type DDA Type DAA Type INSUFFICIENT PRESSURE PROTECTION In case insufficient working air pressure occurs, the machine brakes automatically. CHECK THESE OUTSTANDING STANDARD FEATURES Rugged Construction The main frame is fabricated of heavy-duty steel plate and ribbed to minimize vibration and deflection. 1300DA Heavy Duty Models PANEL CLEANING BRUSH ROLLER Built at outfeed end of the machine, this panel cleaning brush roller cleans dust off the sanded panel. IRON CONTACT ROLLER (Optional) The steel contact roller is manufactured from special steel, heat treated for minimum wear and long service life. It is ideal for sizing and heavy sanding applications. AIR PAD (Optional) 1. In conjunction with the use of a frequency inverter, the machine can perform lacquered panel sanding operations. 2. Suited for sanding veneer laminated panel. CONVEYOR BELT TRACKING CONTROL Convenient Controls All operating controllers are centralized in a convenient control panel. Large, clearly identified and color coded push buttons simplify set up and start-up. Load Meter Maintains constant check during operation to indicate percentage of full load on motor. Conveniently mounted for immediate readout. Emergency Stop Button Large mushroom push button on control panel provides immediate stop control of all operating systems and outfeed. Main Motor Drive Heavy-duty rugged support of sanding head drive motor. Horsepower of motor directly related to size and performance requirements of specific unit ordered. Heavy-Duty Rubber Covered Contact Drum Carefully designed and balanced to insure precise, chatter-free sanding. Covered with proper durometer rubber for each application. Spring Loaded Hold-Down Rolls. Spring loaded pinch rolls are mounted at the infeed and outfeed of the machine to insure positive feeding. Hold-down shoe The hold-down shoe is hard chrome treated for maximum wear resistance. Variable Feed Speed Sanders have variable feed speed as standard equipment. 1-2 Rigid machine construction for continuous heavy-duty sanding. The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track. Automatic elevation of conveyor table(micro-computer controlled with digital readout) It accurately displays the position of the conveyor table.
25A Type 37A Type 25DA, 37DA Type 43DA, 52DA Type "Mirror type tracking sensors for most accurate and reliable belt tracking" (Allen bradley brand available) C432 C251 PANEL CLEANING BRUSH ROLLER (Optional) Built at outfeed end of the machine, this panel cleaning brush roller cleans dust off the sanded panel. VARIABLE SPEED UNIT The conveyor belt speed is controlled by a variable speed unit. Feed speed can be varied as desired to suit all types of workpiece material, assuring superior sanding quality. FEED CONTROLLED BY FREQUENCY INVERTER (Optional) Used for adjusting the sanding belt speed. (Use together with hollow shaft speed reducer) SANDING BELT QUICK CHANGE DEVICE The sanding belt is changed quickly for time saving and convenience. Standard Duty Models Versatile sanding machines at an economical price. CONVEYOR BELT TRACKING CONTROL The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track. 3-4
N Type ND Type NA Type NDA Type SPIRAL CUTTER HEAD 900NDA SPIRAL CUTTERHEAD The spiral cutterhead can be raised or lowered by turning a handwheel. A graduated scale is provided to indicate the thickness adjustment. PANEL CLEANING BRUSH ROLLER Built at outfeed end of the machine, this panel cleaning brush roller cleans dust on the sanded panel. The spiral cutter head is fitted with four edge throw away Tungsten Carbide knife inserts. It is precisely machined, providing superior chip removal rate, minimum noise, and extremely smooth cutting effect. "Mirror type tracking sensors for most accurate and reliable belt tracking" (Allen bradley brand available) A COMBINATION PLANER AND SANDER The first station is a knife planer head, followed with a contact drum head at second station, and platen head at third station. Spiral Cutterhead Planer Sander MICRO-COMPUTER CONTROL WITH DIGITAL READOUT AIR JET CLEAR Head configuration can be made to meet customer s requirement. Choice of single, double or three heads. A combination planer and sander. SECTIONAL PRESSURE SHOE (Optional) 5-6
SECTION PRESSURE SHOE (Optional) Spiral Cutterhead Planer Sander (Standard Duty) 25NA SPIRAL CUTTERHEAD Insert can be changed without having to remove the cutterhead. SPIRAL CUTTERHEAD ELEVATION (Standard) The spiral cutterhead can be raised or lowered by turning a handwheel. A graduated scale is provided to indicate the thickness adjustment. CONVEYOR BELT TRACKING CONTROL The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track. 52NDA CONTROL PANEL VARIABLE SPEED UNIT The conveyor belt speed is controlled by a variable speed unit. Feed speed can be varied as desired to suit all types of workpiece material, assuring superior sanding quality. 7-8
Heavy Duty Models 2'/3' CAPACITY Specifications Standard Duty Models 2'/3' CAPACITY Specifications 9-10 MODEL TP-600D TP-600A TP-600DA TP-600DDA Working width 610 mm 610 mm 610 mm 610 mm Main motor standard 15 HP 15 HP 20,15 HP 20,20,15 HP Feed motor 2 HP 2 HP 2 HP 3 HP Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min Sanding belt size 25"x75" 25"x75" 25"x75" 25"x75" Compressed air required 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 1030 M 3 /Hr 1030 M 3 /Hr 2064 M 3 /Hr 3500 M 3 /Hr Net weight 1200 kg 1200 kg 2000 kg 2800 kg Gross weight 1500 kg 1500 kg 2400 kg 3150 kg Dimensions:(LxWxH) 62"x56"x81" 62"x56"x81" 79"x70"x81" 100"x70"x80" Packing size:(lxwxh) 65"x59"x85" 65"x59"x85" 82"x73"x84" 103"x73"x86" MODEL TP-900D TP-900A TP-900DA TP-900DDA Working width 910 mm 910 mm 910 mm 910 mm Main motor standard 20 HP 15 HP 25,20 HP 25,20,20 HP Feed motor 2 HP 2 HP 3 HP 3 HP Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min Sanding belt size 37"x75" 37"x75" 37"x75" 37"x75" Compressed air required 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 1720 M 3 /Hr 1720 M 3 /Hr 3500 M 3 /Hr 5180 M 3 /Hr Net weight 1440 kg 1440 kg 2800 kg 3800 kg Gross weight 1850 kg 1850 kg 3250 kg 4300 kg Dimensions:(LxWxH) 65"x60"x81" 65"x60"x81" 83"x81"x81" 100"x84"x81" Packing size:(lxwxh) 68"x62"x87" 68"x62"x87" 86"x85"x85" 103"x86"x85" 3. 5 '/4' CAPACITY MODEL TP-1100D TP-1100A TP-1100DA TP-1100DDA TP-1100DAA Working width 1100 mm 1100 mm 1100 mm 1100 mm 1100 mm 125 mm Main motor standard 30 HP 20 HP 30,20 HP 30,30,20 HP 30,20,20 HP Feed motor 3 HP 3 HP 3 HP 5 HP 5 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP 1 HP 1 HP Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min Sanding belt size 43"x84" 43"x84" 43"x84" 43"x84" 43"x84" Compressed air required 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 2600 M 3 /Hr 2600 M 3 /Hr 5180 M 3 /Hr 7760 M 3 /Hr 7760 M 3 /Hr Net weight 2200 kg 2200 kg 4000 kg 4485 kg 4850 kg Gross weight 2500 kg 2500 kg 4500 kg 4850 kg 5100 kg Dimensions:(LxWxH) 98"x70"x80" 98"x70"x80" 98"x78"x80" 98"x101"x80" 98"x109"x80" Packing size:(lxwxh) 102"x74"x89" 102"x74"x89" 105"x85"x89" 105"x90"x89" 105"x90"x89" MODEL TP-1300D TP1300A TP-1300DA TP-1300DDA TP-1300DAA Working width 1300 mm 1300 mm 1300 mm 1300 mm 1300 mm 125 mm Main motor standard 30 HP 25 HP 30,25 HP 40,30,25 HP 40,30,25 HP Feed motor 3 HP 3 HP 5 HP 7 1/2 HP 7 1/2 HP Table hoist motor 1/2 HP 1/2 HP 1 HP 1 HP 1 HP Feed speeds (Variable) 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min 6-26 M/min Sanding belt size 52"x84" 52"x84" 52"x84" 52"x84" 52"x84" Compressed air required 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 3500 M 3 /Hr 3500 M 3 /Hr 6860 M 3 /Hr 9870 M 3 /Hr 9870 M 3 /Hr Net weight 2500 kg 2500 kg 4700 kg 5050 kg 5350 kg Gross weight 2800 kg 2800 kg 5200 kg 5500 kg 5880 kg Dimensions:(LxWxH) 107"x70"x83" 107"x70"x83" 107"x88"x80" 118"x88"x80" 118"x88"x80" Packing size:(lxwxh) 109"x74"x89" 109"x74"x89" 109"x89"x89" 109"x89"x89" 109"x89"x89" MODEL C250 C251 C252 Working width 610 mm 610 mm 610 mm Working height 100 mm 100 mm 125 mm Main motor standard 10 HP 10 HP 15,10 HP Feed motor 1 HP 1 HP 2 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min Sanding belt size 24"x60" 24"x60" 25"x60" Compressed air required 4 kg/cm 2 4 kg/cm 2 5 kg/cm 2 Exhaust volume requirement 2575 M 3 /Hr 2575 M 3 /Hr 3090 M 3 /Hr Net weight 660 kg 660 kg 1350 kg Gross weight 720 kg 720 kg 1600 kg Dimensions:(LxWxH) 53"x50"x63" 53"x50"x63" 74"x54"x70" Packing size:(lxwxh) 56"x54"x70" 56"x54"x70" 78"x57"x76" MODEL C370 C371 C372 Working width 910 mm 910 mm 910 mm Working height 100 mm 125 mm 125 mm Main motor standard 20 HP 15 HP 20,15 HP Feed motor 2 HP 2 HP 2 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min Sanding belt size 37"x60" 37"x60" 37"x60" Compressed air required 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 Exhaust volume requirement 3090 M 3 /Hr 3090 M 3 /Hr 3500 M 3 /Hr Net weight 900 kg 900 kg 1500 kg Gross weight 1150 kg 1150 kg 1800 kg Dimensions:(LxWxH) 64"x53"x73" 64"x53"x73" 74"x64"x70" Packing size:(lxwxh) 67"x56"x78" 67"x55"x78" 78"x67"x76" 3.5'/4' CAPACITY MODEL C430 C431 C432 C433 Working width 1100 mm 1100 mm 1100 mm 1100 mm Working height 125 mm 125 mm 150 mm 150 mm Main motor standard 20 HP 15 HP 20, 15 HP 25,20,20 HP Feed motor 2 HP 2 HP 3 HP 3 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 4-16 M/min Sanding belt size 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 Numbers of knife insert 43"x75" 43"x75" 43"x75" 43"x75" Exhaust volume requirement 2600 M 3 /Hr 2600 M 3 /Hr 5180 M 3 /Hr 7760 M 3 /Hr Net weight 1400 kg 1400 kg 2100 kg 3000 kg Gross weight 1650 kg 1650 kg 2450 kg 3300 kg Dimensions:(LxWxH) 70"x68"x76" 70"x68"x76" 70"x82"x77" 88"x106"x77" Packing size:(lxwxh) 76"x74"x83" 76"x74"x83" 73"x73"x85" 109"x89"x83" MODEL C520 C521 C522 C523 Working width 1270 mm 1270 mm 1270 mm 1270 mm Working height 125 mm 125 mm 150 mm 150 mm Main motor standard 30 HP 25 HP 20, 20 HP 30,25,20 HP Feed motor 3 HP 3 HP 3 HP 7.5 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP 1 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 6-26 M/min Sanding belt size 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 Numbers of knife insert 52"x75" 52"x75" 52"x75" 52"x75" Exhaust volume requirement 3500 M 3 /Hr 3500 M 3 /Hr 6860 M 3 /Hr 9870 M 3 /Hr Net weight 1800 kg 1800 kg 2500 kg 4500 kg Gross weight 2050 kg 2050 kg 2850 kg 4900 kg Dimensions:(LxWxH) 75"x70"x76" 75"x70"x76" 76"x82"x77" 94"x104"x76" Packing size:(lxwxh) 81"x76"x83" 81"x76"x83" 80"x73"x85" 109"x89"x89"
11-12 Spiral Cutterhead Planer Sander (Heavy Duty) 2'/3' CAPACITY 3. 5 '/4' CAPACITY Specifications MODEL TP-600N TP-600ND TP-600NA TP-600NDA Working width 610 mm 610 mm 610 mm 610 mm Main motor standard 20 HP 20, 20 HP 20, 20 HP 20,20,20 HP Feed motor 2 HP 3 HP 3 HP 3 HP Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min Sanding belt size - 25"x75" 25"x75" 25"x75" Numbers of knife insert 160pcs 160pcs 160pcs 160pcs Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 1030 M 3 /Hr 2064 M 3 /Hr 2064 M 3 /Hr 3500 M 3 /Hr Net weight 1200 kg 2000 kg 2000 kg 2800 kg Gross weight 1500 kg 2450 kg 2450 kg 3150 kg Dimensions:(LxWxH) 62"x56"x81" 79"x70"x81" 79x70"x81" 100"x70"x80" Packing size:(lxwxh) 65"x59"x85" 82"x73"x84" 82"x73"x84" 103"x73"x86" MODEL TP-900N TP-900ND TP-900NA TP-900NDA Working width 910 mm 910 mm 910 mm 910 mm Main motor standard 20 HP 20, 20 HP 20 HP, 20 HP 20,20,20 HP Feed motor 2 HP 3 HP 3 HP 3 HP Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min Sanding belt size - 37"x75" 37"x75" 37"x75" Numbers of knife insert 240pcs 240pcs 240pcs 240pcs Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 1720 M 3 /Hr 3500 M 3 /Hr 3500 M 3 /Hr 5180 M 3 /Hr Net weight 1400 kg 2700 kg 2700 kg 3700 kg Gross weight 1810 kg 3150 kg 3150 kg 4200 kg Dimensions:(LxWxH) 65"x60"x81" 83"x81"x81" 83"x81"x81" 98"x84"x81" Packing size:(lxwxh) 68"x62"x87" 86"x85"x85" 86"x85"x85" 102"x86"x85" MODEL TP-1100N TP-1100ND TP-1100NA TP-1100NDA Working width 1100 mm 1100 mm 1100 mm 1100 mm Main motor standard 25 HP 25, 25 HP 25, 20 HP 25,25,20 HP Feed motor 3 HP 3 HP 3 HP 5 HP Table hoist motor 1/2 HP 1/2 HP 1/2 HP 1 HP Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min Sanding belt size - 43"x84" 43"x84" 43"x84" Numbers of knife insert 280pcs 280pcs 280pcs 280pcs Compressed air required 4 kg/cm 2 5 kg/cm 2 6 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 2600 M 3 /Hr 5180 M 3 /Hr 5180 M 3 /Hr 7760 M 3 /Hr Net weight 2000 kg 3200 kg 3200 kg 4100 kg Gross weight 2300 kg 3650 kg 3650 kg 4500 kg Dimensions:(LxWxH) 98"x70"x80" 98"x88"x80" 98"x86"x80" 98"x103"x80" Packing size:(lxwxh) 102"x74"x89" 102"x89"x89" 102"x89"x89" 102"x89"x89" MODEL TP-1300N TP-1300ND TP-1300NA TP1300NDA Working width 1300 mm 1300 mm 1300 mm 1300 mm Main motor standard 30 HP 30,30 HP 30,25 HP 30,30,25 HP Feed motor 3 HP 5 HP 5 HP 7 1/2 HP Table hoist motor 1/2 HP 1 HP 1 HP 1 HP Feed speeds (Variable) 3-16 M/min 3-16 M/min 3-16 M/min 3-16 M/min Sanding belt size - 52"x84" 52"x84" 52"x84" Numbers of knife insert 340pcs 340pcs 340pcs 340pcs Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 6 kg/cm 2 Exhaust volume requirement 3500 M 3 /Hr 6860 M 3 /Hr 6860 M 3 /Hr 9870 M 3 /Hr Net weight 2500 kg 4100 kg 4100 kg 5350 kg Gross weight 2800 kg 4500 kg 4500 kg 5880 kg Dimensions:(LxWxH) 107"x70"x83" 107"x88"x80" 107"x88"x80" 118"x88"x80" Packing size:(lxwxh) 109"x74"x89" 109"x89"x89" 109"x89"x89" 109"x89"x89" Spiral Cutterhead Planer Sander (Standard Duty) 2'/3' CAPACITY MODEL TP-25ND TP-25NA TP-25NDA Working width 610mm 610mm 610mm Working height 125mm 125mm 125mm Main motor standard 15, 15HP 15, 10HP 15, 15, 10HP Feed motor 2HP 2HP 3HP Table hoist motor 1/2HP 1/2HP 1/2HP Feed speeds (Variable) 4-16M/min 4-16M/min 4-16M/min Sanding belt size 25"x60" 25"x60" 25"x60" Numbers of knife insert 240pcs 240pcs 240pcs Compressed air required 4kg/cm 2 4kg/cm 2 5kg/cm 2 Exhaust volume requirement 3090M 3 /Hr 3090M 3 /Hr 3500M 3 /Hr Net weight 1350kg 1350kg 1850kg Gross weight 1600kg 1600kg 2250kg Dimensions:(LxWxH) 74"x54"x70" 74"x54"x70" 87"x54"x73" Packing size:(lxwxh) 78"x57"x76" 78"x57"x76" 90"x57"x78" MODEL TP-37ND TP-37NA TP-37NDA Working width 910mm 910mm 910mm Working height 125mm 125mm 125mm Main motor standard 20, 20HP 20, 20HP 20, 20, 15HP Feed motor 2HP 2HP 3HP Table hoist motor 1/2HP 1/2HP 1/2HP Feed speeds (Variable) 4-16M/min 4-16M/min 4-16M/min Sanding belt size 37"x60" 37"x60' 37"x60" Numbers of knife insert 318pcs 318pcs 318pcs Compressed air required 4kg/cm 2 4kg/cm 2 5kg/cm 2 Exhaust volume requirement 3500M 3 /Hr 3500M 3 /Hr 5180M 3 /Hr Net weight 1500kg 1500kg 1800kg Gross weight 1900kg 1900kg 2300kg Dimensions:(LxWxH) 74"x64"x70" 74"x64"x70" 87"x64"x70" Packing size:(lxwxh) 78"x67"x76" 78"x67"x76" 90"x67"x76" 3. 5 '/4' CAPACITY Specifications MODEL TP-43N TP-43ND TP-43NA TP-43NDA Working width 1100 mm 1100 mm 1100 mm 1100 mm Main motor standard 20 HP 20, 20 HP 20, 20 HP 20,20,15 HP Feed motor 3 HP 3 HP 3 HP 5 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 4-16 M/min Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 Sanding belt size x 43"x75" 43"x75" 43"x75" Numbers of knife insert 280 pcs 280 pcs 280 pcs 280 pcs Exhaust volume requirement 5180 M 3 /Hr 6860 M 3 /Hr 6860 M 3 /Hr 7760 M 3 /Hr Net weight 1500 kg 2100 kg 2100 kg 3000 kg Gross weight 1700 kg 2450 kg 2450 kg 3500 kg Dimensions:(LxWxH) 83"x70"x77" 87"x78"x74" 87"x78"x74" 88"x106"x77" Packing size:(lxwxh) 90"x76"x83" 103"x84"x80" 103"x84"x80" 101"x86"x89" MODEL TP-52N TP-52ND TP-52NA TP-52NDA Working width 1300 mm 1300 mm 1300 mm 1300 mm Main motor standard 25 HP 25, 20 HP 25, 25 HP 25,25,25 HP Feed motor 3 HP 5 HP 5 HP 5 HP Table hoist motor 1/2 HP 1/2 HP 1 HP 1 HP Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 4-16 M/min Compressed air required 4 kg/cm 2 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 Sanding belt size x 52"x75" 52"x75" 52"x75" Numbers of knife insert 340 pcs 340 pcs 340 pcs 340 pcs Exhaust volume requirement 6860 M 3 /Hr 7760 M 3 /Hr 7760 M 3 /Hr 9870 M 3 /Hr Net weight 1800 kg 2500 kg 2500 kg 4500 kg Gross weight 2050 kg 2850 kg 2850 kg 4900 kg Dimensions:(LxWxH) 90"x70"x77" 90"x78"x74" 90"x78"x74" 94"x104"x76" Packing size:(lxwxh) 96"x76"x83" 96"x84"x80" 96"x84"x80" 109"x89"x89"
Lacquered Panel Sander VARIABLE SPEED UNIT The conveyor belt speed is controlled by a variable speed unit. Feed speed can be varied as desired to suit all types of workpiece material, assuring superior sanding quality. Optional Equipment FREQUENCY INVERTER Air Pad Digital Readout Air Jet Cleaner It can easily control sanding belt speed, providing wide range of belt speed to match the variety of different paints. 13-14 Lacquered panel sanding with ease. 2 ' / 3 '/4' CAPACITY HEAVY-DUTY RUBBER COVERED CONTACT DRUM (SOFT RUBBER ROLLER) Carefully designed and balanced to insure precise, chatter-free sanding. Covered with proper durometer rubber for each application. PANEL CLEANING BRUSH ROLLER Built at outfeed end of the machine, this panel cleaning brush roller clean powder on the sanded panel. AIR JET CLEANER The top dust hood sucks all dust removed by the air jet cleaner. This prevents dust accumulating on the photocell sensor. MODEL TP-25B TP-620B TP-37B TP-52B TP-1300B Working width 610mm 620mm 910mm 1300mm 1300mm Working height 125mm 125mm 125mm 125mm 125mm Main motor standard 5HP 7 1/2HP 7 1/2HP 15HP 20HP Feed motor 1HP 1HP 1HP 3HP 3HP Table hoist motor 1/2HP 1/2HP 1/2HP 1/2HP 1/2HP Feed speeds (Variable) 6-24M/min 6-24M/min 6-24 M/min 6-24 M/min 6-24 M/min Sanding belt size 24"x48" 25"x60" 37"x60" 52"x75" 52"x84" Compressed air required 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 5 kg/cm 2 7 kg/cm 2 Exhaust volume requirement 2060M3/Hr 2060M3/Hr 3090M3/Hr 3500M3/Hr 5180M3/Hr Net weight 620kg 780kg 900kg 2000kg 2500kg Gross weight 740kg 940kg 1150kg 2300kg 2800kg Dimensions:(LxWxH) 50"x52"x62" 50"x52"x68" 58"x56"x68" 102"x70"x80" 107"x70"x80" Packing size:(lxwxh) 52"x54"x70" 50"x52"x77" 60"x58"x77" 104"x72"x89" 109"x74"x89" Brushing Roller Iron contact roller Heavy Duty Conveyor Belt Frequency Inverter Pressure Switch Vacuum Table ACCESSORIES Standard accessories Optional accessories Accessories Air Pad Digital Air Jet Brushing Iron Thickness Frequency Pressure Safety Vacuum Hydraulic Readout Cleaner Roller Contact Conveyer inverter Switch Door Table Feed Model Roller Belt Heavy Duty Wide Belt Sander TP-600 TP-900 TP-1100 TP-1300 Standard Duty Wide Belt Sander C-25 C-37 C-43 C-52 Spiral cutterhead planer sander TP-600 TP-900 TP-1100 TP-1300 Lacquered Panel Sander TP-25B TP-37B TP-1100 TP-1300 Specifications and design characteristics are subject to change without prior notice.
AKHURST MACHINERY LIMITED (CANADA) British Columbia 1669 Foster's Way Delta, B. C. V3M 6S7 Quebec 2786 Chemin du Lac Longueuil, QC J4N 1B8 Tel :(604)540-1430 Toll Free:(888)265-4826 Tel :(450)679-7171 Toll Free:(888)265-2685 Fax:(604)540-1780 E-mail:van@akhurst.com Fax:(450)679-1727 E-mail:mtl@akhurst.com Prairie Provinces 9615-63 rd Avenue Edmonton, AB T6E 0G2 Tel :(780)435-3936 Toll Free:(888)265-4336 Fax:(780)435-0003 E-mail:edm@akhurst.com Maritime Provinces 122 Dieppe Boulevard Dieppe, NB E1A 6P8 Tel :(506)857-3108 Toll Free:(888)265-4629 Fax:(506)859-8515 E-mail:mct@akhurst.com Ontario 6235 Danville Road Mississauga, ON L5T 2H7 Tel :(905)670-0924 Toll Free:(888)265-4867 Fax:(905)564-8604 E-mail:tor@akhurst.com CANTEK AMERICA INC. (U.S.A) PMB#104, 1124 Fir Avenue Blaine, WA 98230 Toll Free:(866)522-6835 Fax:(604)540-1780 E-mail:sales@cantekamerica.com W/ 027 2005.06 Sunway 04-23227907