Duble thrttle/check valve type Z2FS0 NS0 up t,5 Ma up t dm /min WK 450 2 02.200 LICION hrttle/check valve type Z2FS0 0... is used t cntrl main flw rate (r pilt flw rate) in ne directin f flw and t allw free flw in the ppsite directin. he valve may be designed as duble versin (twin versin - valve functin is realized in tw prts and ) r single versin (valve functin is realized in ne prt r ). he valve is applied t vertical stack munting (sandwich plate) - generally is fitted between a subplate and a directinal valve f the same nminal size and in this case is used t limit main flw rate (t cntrl the speed f a receiver mvement). DESCRIION OF OERION Z2FS0 / 2 2 5 6 4 Hydraulic fluid frm directinal valve via prt (r ) flws t receiver thrugh thrttling slt (). t the same time the fluid under perating pressure acts via line n spring laded side f spl (4). he spl (4) is thus hld in the thrttle psitin by bth spring and hydrstatic frce. Hydraulic fluid flwing back frm a receiver thrugh prt (r ) shifts the spl (4) in the directin f adjustment and allws the fluid t flw freely (the valve perates as a check valve). hrttle rate (vlume f fluid flw) can be adjusted by means f adjustment screw (5). Depending n the way the valve is fitted in relatin t the seal ring plate (6), thrttling effect can be achieved either in the supply f a receiver (ptin shwn n the drawing) r drain (by rtating the valve abut the crss hrizntal axis by ). NOE: Fr valve versin with thrttling effect in ne prt ( r ) when changing thrttling effect in the supply t thrttling in the drain at the same time changes the thrttling lcatin (frm prt t r frm prt t ). ype Z2FS0 - - WK 450 2 02.200
ECHNICL D Hydraulic fluid Required filtr f ltrat atin Recmmended filtratin Nminal fluid viscsity Viscsity range Fluid temperature range (in a tank) mbient temperature range Maxim imum perat ating pressure Crac acking pressure 0,0 Ma Maxim imum flw f dm / min m Weight mineral il up t t 6 µm up t 0 µm 2 7 mm /s at temperature 55 C 2 2,8 up t mm /s recmmended max -20 C up t + C,,5 Ma 2 kg 40 C up t 55 C -20 C up t + C SCHEMES Hydraulic schemes f valves type Z2F 2FS0... supp upply thrttling in prts and duble versin Z2FS0... drain thrttling in prts and (valve rtated by ) supp upply thrttling in prt single versin Z2FS0... drain thrttling in prt (valve rtated by ) supp upply thrttling in prt single versin Z2FS0... drain thrttling in prt (valve rtated by ) WK 450 2 02.200-2 - ype Z2FS0
OVERLL ND CONNECION DIMENSIONS duble versin Z2FS0... 2 84 (max),5 strke strke,5 6 5 S6 5 2,5 4 6,5 Y 88 O7,5-2 hles () O6,5-4 hles O8-2 hles (,) O0 () 2,9 46 40 M6 depth 2-4 hles (min) 2,4 2,5 46 54 6, O,2 (max)- 5 hles (,,,, ) 54 50,8 7, 27 6,7 6 88 (min) r 0,0/00 mm 0,6,2 8 7,2 - Overall dimensins fr the valve versin Z2FS0... with thrttling effect in prts, - djustment screw; rtatin t the right - increasing flw thrttling effect; rtatin t the left - decreasing flw thrttling effect 4 - Seal ring plate - enables t arrange thrttling effect in the supply r in the drain by changing the way in which the valve is fitted in relatin t the plate - rtatin the valve abut the axis Y by (see examples n page 5) 5 - late with adjustment scale and valve scheme 6 - Seal -ring 2 x 2-5 pcs/kit (,,,, ) 7 - Munting hles cnfiguratin f a subplate in accrdance with the standards listed belw: CEO R 2H - symbl CEO 4.2-4-05 (nminal size CEO 05) 0 ISO 440 - symbl ISO 440-05-04-0-94 fixing screws M6 x L* L - 0.9-4 pcs/kit in accrdance with N - EN ISO 4762 tightening trque Md 5 Nm 8 - Required surface finish f a subplate NOE: (*) - Required length f the screws L is related t type and the number f hydraulic cmpnents sandwich fitted ype Z2FS0 - - WK 450 2 02.200
OVERLL ND CONNECION DIMENSIONS single versins: Z2FS0...; Z2FS0...,5 strke 74,5 (max) 6 5 6 2 S6 5 7 2,5 4 6 6 8 6 74,5 (max) Y 88 O7,5-2 hles () O6,5-4 hles O8-2 hles (,) O0 (),5 2,9 strke,5 46 M6 depth 2-4 hles (min) 2,4 2,5 46 49,5 6, O,2 (max)- 5 hles (,,,, ) 54 54 50,8 7, 27 6,7 6 88 (min) r 0,0/00 mm 0,6,2 9 0 40,2 - Overall dimensins fr the valve versin Z2FS0... with supply thrttling in prt r drain thrttling in prt,4 - Overall dimensins fr the valve versin Z2FS0... with supply thrttling in prt r drain thrttling in prt 5 - djustment screw; rtatin t the right - increasing flw thrttling effect; rtatin t the left - decreasing flw thrttling effect 6 - Seal ring plate - enables t arrange thrttling effect in the supply r in the drain by changing the way in which the valve is fitted in relatin t the plate - rtatin the valve abut the axis Y * by (see examples n page 5) NOE: (*) - Fr the valve versin with thrttling effect in nly ne prt ( r ) at the same time changes the thrttling lcatin (frm prt t r frm prt t ) 7 - late with adjustment scale and valve scheme 8 - Seal -ring 2 x 2-5 pcs/kit (,,,, ) 9 - Munting hles cnfiguratin f a subplate in accrdance with the standards listed belw: CEO R 2H - symbl CEO 4.2-4-05 (nminal size CEO 05) 0 ISO 440 - symbl ISO 440-05-04-0-94 fixing screws M6 x L** L - 0.9-4 pcs/kit in accrdance with N - EN ISO 4762 tightening trque Md 5 Nm 0- Required surface finish f a subplate NOE: (**) - Required length f the screws L is related t type and the number f hydraulic cmpnents sandwich fitted WK 450 2 02.200-4 - ype Z2FS0
ERFORMNCE CURVES 2 measured at viscsity ν 4 mm /s and temperature t 50 C Characteristic curves p(q) fr the valve type Z2F 2FS0... fr varius thrttle settings thrttle setting [adjustment screw turns] 4 5 6 6,5 7 7,5 8 8,5 9 8,0 Flw resistance curves p(q) fr the check valve 0, thrttle clsed thrttle pen 5,0 0,0 9,5 0 p [Ma Ma] 0,2 0, p [Ma Ma] 5,0 0,25,5 0 20 40 60 Q [dm /min],0 0,5 0, 0 40 20 Q [dm /min] 60 EXMLES OF LICION IN HYDRULIC SYSEM Flw thrttling in the supply f the receiver (actuatr) Flw thrttling in the drain f the receiver (actuatr) - valve fitted in rtated psitin by Z2FS0/2 Z2FS0/2 ype Z2FS0-5 - WK 450 2 02.200
HOW O ORDER Z2FS Nminal size (NS) NS0 0 0 * hrttling lcatin (hydraulic schemes n page 2) thrttle valves n the side f prts and n cde thrttle valve n the side f prt in the supply r prt in the drain thrttle valve n the side f prt in the supply r prt in the drain Series number (20-29) - cnnectin and installatin dimensins unchanged 2X series 2 2 Sealing NR (fr fluids n mineral il base) FKM (fr fluids n phsphate ester base) n cde V Further requirements in clear text (t be agreed with the manufacturer) NOES: he thrttle/check valve shuld be rdered accrding t the abve cding. he symbls in bld are the preferred versins available in shrt delivery time. Cding example: Z2FS0/2 SULES ND FIXING SCREWS Subplates must be rdered accrding t catalgue sheet WK 496 520. Subplate symbls: G 66/0 - threaded cnnectins G /8 G 67/0 - threaded cnnectins G /2 G 89/0 - threaded cnnectins G /4 G 67/02 - threaded cnnectins M22 x,5 Subplates and screws fixing the thrttle/check valve M6 x L* L - 0, 0,9-4 pcs/kit in accrdance with N - EN ISO 4762 must be rdered separately. ightening trque Md 5 Nm NOES: (*) - Required length f the screws L is related t type and the number f hydraulic cmpnents sandwich fitted. he subp ubplate symbl in bld b is s the t preferred versin availab able in shrt delivery time. t ONR Wadwice S.. ul. Wjska lskieg 29 4-00 Wadwice tel. +48 488 2 00 fax.+48 488 2 0 www.pnar-wadwice.pl WK 450 2 02.200-6 - ype Z2FS0