RATCLIFF FLEXI-LIFTS THE VERSATILE RANGE OF MIX n MATCH 500KG CAPACITY LIFTS
RATCLIFF FLEXI-LIFT RANGE - 500KG CAPACITY SUITABLE FOR BOX BODIES, DROPSIDE TRUCKS AND FLAT BEDS RATCLIFF Flexi-Lift PALFINGER has been designed manufacture to offer high maximum quality, user-friendly all round efficiency Ratcliff tail for lifts both to provide the user safe and and theeasy access bodybuilder. to vehicles There for are wheelchair three basic, users competitively and others with priced mobility models, difficulties. which leave the factory fully assembled and pre-wired, ready for bolting on to the vehicle frame. Our comprehensive range of models provides ideal access solutions, not only for mini-buses, but also for All you regular need buses, do to specify mobile your libraries, lift is to health choose centres the frame, and choose exhibition the, units, complying choose the ramps with the requirements and options required of the Disability to suit your Discrimination own application Act. - nothing could be easier! RQ518 - top of the range Flexi-Lift Unique lightweight anodised frame and - prevents corrosion, increases payload, reduces maintenance, maintains smart appearance and improves residual value. Available with 900mm, 1050mm and 1125mm one piece. Fixed or hinged ramps, side ramps and anti-slip surface available. RQ517 - top selling Flexi-Lift Robust galvanised steel frame and anodised, reduces corrosion and maintenance. Available with 900mm, 1050mm and 1125mm one piece, and 1125mm folding. Fixed or hinged ramps, side ramps and anti-slip surface available. RQ510 Competitively priced, basic Flexi-Lift with robust steel frame and strong steel-framed 900mm with treadplate overlay and. Most frequently fitted to dropside trucks and flatbeds. The steel mesh or steel mesh/ treadplate options are popular. Galvanised steel frame option available. Flexi-lift Tipper Lifts Suitable for Tipper Vehicles. Tip-Through and Tip-Over 500kg models available. See separate Tipper Lift brochure. Flexi-lift Rear Frame Lift All lift. Eliminates the need for roller shutters or doors. See separate Rear Frame Lift brochure.
Platforms Aluminium s (not RQ510) do not require painting and are fitted with a hard-wearing, replaceable protective strip which reduces wear and damage during use. Choice of depths (see Options). model RQ510 standard features steel frame steel frame + overlay width over columns width between columns column centres min/max floor height depth 2280 2152 2216 850/1160 900 2130 2002 2066 850/1160 900 2080 1952 2016 850/1160 900 weights from 190kg Unique Aluminium Platform Construction Constructed from unique anodised planking, for additional strength. Tongue and groove assembly enables individual damaged planks to be replaced. Power Pack in Beam Reduces installation time. Eliminates need to find suitable position on the chassis of small 3.5 tonne vehicles to mount the powerpack. Protected from damage by road spray etc. RQ517 RQ518 galvanised steel frame frame 2280 2152 2216 850/1160 900 2130 2002 2066 850/1160 900 2080 1952 2016 850/1160 900 2284 2146 2216 850/1130 900 2134 1996 2066 850/1130 900 2084 1946 2016 850/1130 900 Note: all measurements in mm unless otherwise stated - nominal ground clearance all models - 450mm Other body widths available up to 2394mm width over columns. 150kg 115kg Controls External control fitted as standard to the nearside column at a convenient position and height for operator use. Internal controls may be fitted as an optional extra on box bodies. Fixed Ramp (option) all models For ease of loading and unloading goods. Stow Lock Tried and tested stowlock, holds securely in stowed position during transit. Hinged Ramps (option) all models Hinged Ramps stow flat against the. When fully open they form a ramp for easy loading/unloading and are raised for load security whilst raising/ lowering the. Galvanised Steel Frame RQ510 (option) RQ517 (standard) The galvanised steel frame protects against corrosion and does not require painting, reducing maintenance and improving appearance.
FLEXI-LIFT OPTIONS RATCLIFF PALFINGER have designed a wide range of options available for the Flexi-Lift Range so that you can specify a lift that really meets your specific application. Check the table on page 4 of the brochure to check what is included in the standard model and then add on the options required. Nothing could be easier! Platform Depths - - 750mm, 825mm, 900mm (standard model), 1050mm and 1125mm RQ510 - steel frame with treadplate 900mm depth only. Lightweight Mesh Platforms RQ510, RQ517 Steel mesh available with or steel frame. Minimises drag improving fuel consumption. Lift frame may be galvanised. Two Piece Folding Aluminium Platform RQ517 1125mm (743mm + 572mm) with. Ideal for dropside trucks and flat beds. Drop-In Safety Gates RQ510, Drop-in side gates are carried around in the rear of the vehicle and used when required. They provide additional operator safety during lifting/ lowering the. Roll Stops (with ) Suitable for 1050mm and 1125mm deep s only. Roll stops provide extra load security. Especially useful for use with roll pallets. Hinged Safety Gates These gates are hinged to the edge and stow flat against the. The lift cannot be used without the gates being erected, ensuring operator safety. Sack Barrow Side Ramp RQ510, Fitted to nearside edge for ease of loading goods on sack barrow on and off the. Internal Controls 2 button switch with change-over is located near the rear at a convenient height for operator use. The change-over prevents the lift being operated by the external controls at the same time. Anti-Slip Platform Surface Anti-slip protecta kote surface provides extra operator safety and load security at all times, but especially useful during damp weather conditions. Restart Protector all models Fits neatly into the power pack. Avoids inconvenience of a flat battery due to tail lift usage by monitoring battery voltage. Alarm gives warning before power supply to lift is cut off.
TECHNICAL DRAWINGS - FLEXI-LIFT RANGE RQ510 all measurements are mm RQ517 all measurements are mm RQ518 all measurements are mm RQ517 with folding all measurements are mm For further information on these products or other lift models Please contact the RATCLIFF PALFINGER Sales Office on +44 (0)1707 382880 or a member of the Sales Team for assistance The RATCLIFF PALFINGER policy is one of continuous product development and the Company therefore reserves the right to alter product or component specifications without notice RATCLIFF PALFINGER Ltd Bessemer Road Welwyn Garden City Hertfordshire AL7 1ET, United Kingdom Tel: +44 (0)1707 325571 - Fax: +44 (0)1707 327752 info@ratcliffpalfinger.co.uk Subject to setting and printing errors www.ratcliffpalfinger.co.uk 04/06