NEW Introducing AMS ANO - Mini - System www.arno.de AMS ANO -Mini-System! High productivity for machining small diameter applications. Maximum reliability, high precision and guaranteed repeatability due NEW to the optimized insert location. Easy handling and efficient in operation! AMS the new modular and extremely flexible ANO Mini-System ANO - AMS Ve Versio rsion n-en neng Minimum bore diameter from 2,5 mm and bore depth up to 30 mm.
ANO -Mini-System >> System introduction he AMS system is for various applications with a minimum bore diameter of 2,5 mm and maximum depth of up to 30 mm (depending on application). With the ground taper on the tool shank and the fixed stop in the sleeve the length remains accurately constant and guaranteed cutting edge repeatability is achieved. he cone of the threaded pin ensures secure tool locking and reduces cutting edge vibrations. he result is maximum stability for productive internal applications.» ixed stop» Ground taper on tool shank AMS - modular and flexible «he facts» NEW Boring from diameter of 2,5 mm Grooving from 0,8 mm width ull-radius grooving from 0,5 mm Back turning and chamfering Grooving and chamfering Copy turning hread turning from M4 Axial grooving from diameter 5 mm All with through sleeve coolant! 2
esignation code - Sleeve» ight hand version shown HAMS 04 ANO Mini S=Grooving Shank diameter [mm] shank diameter [mm] ight hand version esignation code -» AMS 25 08 06 01 0 40 ANO Mini S=Grooving = urning S = Grooving K = Copy turning V = Grooving = Chamfering = Back turning G = hreading A = Axial grooving [mm] Groove width EB [mm] Groove depth E [mm] adius 0,1 Overhang length = [mm] Shank diameter Ø 4 mm ight hand Version Information: Grade description see page. 3
ANO -Mini-System >> s and inserts 1 2. 1 urning 95 EB escription 1 1 escription 2,5 AMS--250401-0.40 HAMS 04 15 0,4 0,1 AMS--250401-150.40 1,15 4 0 17 2,35 HAMS 04 20 AMS--250401-200.40 22 HAMS 04 3,0 AMS--300401-0.40 HAMS 04 15 0,4 0,1 AMS--300401-150.40 1,4 4 0 17 2,35 HAMS 04 20 AMS--300401-200.40 22 HAMS 04 3,9 AMS--390602-0.40 HAMS 04 15 0,6 0,2 AMS--390602-150.40 1,9 4 0 17 2,35 HAMS 04 20 AMS--390602-200.40 22 HAMS 04 5,9 AMS--590802-0.60 HAM606 20 0,8 0,2 AMS--590802-200.60 2,9 6 16 0 22 2,8 HAM606 30 AMS--590802-300.60 32 HAM606 7,9 AMS--7902-0.80 HAM608 1,0 0,2 3,9 8 16 0 2,8 25 AMS--7902-250.80 27 HAM608 Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 / 1608 AS0044 KV16 = epth [mm] = adius [mm] = -imension [mm] 4
ANO -Mini-System >> s and inserts 1 E EB 1 Grooving EB +0,03 E escription 1 1 escription 2,5 AMS-S-25080600-0.40 HAMS 04 15 0,8 0,6 AMS-S-25080600-150.40 1,15 4 0 17 2,35 HAMS 04 20 AMS-S-25080600-200.40 22 HAMS 04 3,0 AMS-S-30080600-0.40 HAMS 04 15 0,8 0,6 AMS-S-30080600-150.40 1,4 4 0 17 2,35 HAMS 04 20 AMS-S-30080600-200.40 22 HAMS 04 3,9 AMS-S-390800-0.40 HAMS 04 15 1,0 0,8 AMS-S-390800-150.40 1,9 4 0 17 2,35 HAMS 04 20 AMS-S-390800-200.40 22 HAMS 04 5,9 AMS-S-59151800-0.60 HAM606 20 1,5 1,8 AMS-S-59151800-200.60 2,9 6 16 0 22 2,8 HAM606 30 AMS-S-59151800-300.60 32 HAM606 7,9 AMS-S-79182500-0.80 HAM608 1,8 2,5 3,9 8 16 0 2,8 25 AMS-S-79182500-250.80 27 HAM608 Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 / 1608 AS0044 KV16 E EB EB = Grooving width [mm] E = Grooving depth [mm] = -imension [mm] 5
ANO -Mini-System >> s and inserts 1. EB E 1 adius grooving EB +0,03 E escription 1 1 escription 3,9 0,5 AMS-S-390805-0.40 HAMS 04 15 1,0 0,8 0,5 AMS-S-390805-150.40 1,9 4 0 17 2,35 HAMS 04 20 0,5 AMS-S-390805-200.40 22 HAMS 04 5,9 0,75 AMS-S-59151875-0.60 HAM606 20 1,5 1,8 0,75 AMS-S-59151875-200.60 2,9 6 16 0 22 2,8 HAM606 30 0,75 AMS-S-59151875-300.60 32 HAM606 Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 AS0044 KV16 E EB EB = Grooving width [mm] E = Grooving depth [mm] = adius [mm] = -imension [mm] 6
ANO -Mini-System >> s and inserts 1. 8 20 1 Copy turning EB escription 1 1 escription 2,5 AMS-K-250401-0.40 HAMS 04 15 0,4 0,1 AMS-K-250401-150.40 1,15 4 0 17 2,35 HAMS 04 20 AMS-K-250401-200.40 22 HAMS 04 3,0 AMS-K-300401-0.40 HAMS 04 15 0,4 0,1 AMS-K-300401-150.40 1,4 4 0 17 2,35 HAMS 04 20 AMS-K-300401-200.40 22 HAMS 04 3,9 AMS-K-390802-0.40 HAMS 04 15 0,8 0,2 AMS-K-390802-150.40 1,9 4 0 17 2,35 HAMS 04 20 AMS-K-390802-200.40 22 HAMS 04 5,9 AMS-K-591802-0.60 HAM606 20 1,8 0,2 AMS-K-591802-200.60 2,9 6 16 0 22 2,8 HAM606 30 AMS-K-591802-300.60 32 HAM606 8 20 Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 AS0044 KV16 = epth [mm] = adius [mm] = -imension [mm] 7
ANO -Mini-System >> s and inserts 8 7 45 0,2 1 1 1 Groove and Chamfering B B +0,03 escription 1 1 escription 5,0 20 AMS-V-500800-200.60 2,4 HAM606 1,0 0,8 6 16 0 22 2,8 5,9 20 AMS-V-590800-200.60 2,9 HAM606 8 7 45 Screw Coolant seal ring HAM606 AS0044 KV16 B B 0,2 = Width [mm] = -imension [mm] 8
ANO -Mini-System >> s and inserts 1 90 1 Chamfering 45 EB escription 1 1 escription 2,5 15 0,4 0,1 AMS--250401-150.40 1,15 4 0 17 2,35 HAMS 04 3,0 15 0,4 0,1 AMS--300401-150.40 1,4 4 0 17 2,35 HAMS 04 3,9 15 0,8 0,2 AMS--390802-150.40 1,9 4 0 17 2,35 HAMS 04 5,9 20 1,8 0,2 AMS--591802-200.60 2,9 6 16 0 22 2,8 HAM606 90 Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 AS0044 KV16 B = Width [mm] = epth [mm] = adius [mm] = S-dimension [mm] = -imension [mm] 9
ANO -Mini-System >> s and inserts 1 25 1 Back turning B B escription 1 1 escription 3,9 15 4,0 1,0 0,2 AMS--394002-150.40 1,9 4 0 17 2,35 HAMS 04 5,9 20 4,0 2,0 0,2 AMS--59402002-200.60 2,9 6 16 0 22 2,8 HAM606 25 Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 AS0044 KV16 B B = Width [mm] = epth [mm] = adius [mm] = -imension [mm]
ANO -Mini-System >> s and inserts 60 1 1 hreading 60 Metric-partial profile hread (Pitch) P [mm] escription 1 1 escription 3,0 15 M4 (0,5-1,0) AMS-G-M4-150.40 1,4 4 0 17 2,35 HAMS 04 4,0 15 M5 (0,5-1,0) AMS-G-M5-150.40 1,9 4 0 17 2,35 HAMS 04 6,0 20 M8 (0,5-1,5) AMS-G-M8-200.60 2,9 6 16 0 22 2,8 HAM606 60 Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 AS0044 KV16 = epth [mm] = S-dimension [mm] = -imension [mm] 11
ANO -Mini-System >> s and inserts 60 1 1 hreading 60 Metric-full profile hread escription 1 1 escription 5,0 15 M6 x 1,00 AMS-GV-M6-150.40 1,9 4 0 17 2,35 HAMS 04 6,0 20 M8 x 1,25 AMS-GV-M8-200.60 2,9 6 16 0 22 2,8 HAM606 60 Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 AS0044 KV16 = epth [mm] = S-dimension [mm] = -imension [mm]
ANO -Mini-System >> s and inserts EB 1 E 1 Axial grooving EB +0,03 E escription 1 1 escription 5,0 7,5 AMS-A-501500-075.40 HAMS 04 1,2 1,5 4 0 2,35 15,0 AMS-A-501500-150.40 17 HAMS 04 6,0,0 AMS-A-601500-0.60 HAM606 1,2 1,5 6 16 0 2,8 18,0 AMS-A-601500-180.60 20 HAM606 7,0,0 AMS-A-70152000-0.60 HAM606 1,5 2,0 6 16 0 2,8 20,0 AMS-A-70152000-200.60 22 HAM606 9,0,0 AMS-A-90152000-0.80 HAM608 1,5 2,0 8 16 0 2,8 25,0 AMS-A-90152000-250.80 27 HAM608 EB E Screw Coolant seal ring HAMS 04 AS0043 KV HAM606 / 1608 AS0044 KV16 EB = Grooving width [mm] E = Grooving depth [mm] = -imension [mm] 13
ANO -Mini-System ecommended cutting data» ISO Material Brinell hardness HB Cutting speed Vc [m/min] Non alloy steel ca. 0,4 % C annealed ca. 0,4 % to 0,6 % C annealed 5 150 20-180 20-180 ca. 0,6 % to 0,8 %C chilled 200 20-180 P ow alloy steel High alloy steel annealed chilled chilled annealed chilled 180 275 160 200 325 15-160 15-160 15-160 20-0 20-0 Cast steel unalloyed low alloyed 180 200 20-180 20-180 M Stainless steel Stainless steel Grey cast-iron K Nodular cast-iron Malleable cast-iron high alloyed annealed martensitic/ferritic austenitic Ni > 8 % Cr 18-25 % 225 20-180 200 20-90 200 20-90 180 15-80 180 15-80 180-260 20-0 180-260 20-130 20-0 130-230 N Aluminium alloys 20-500 Copper and copper alloys 20-600 (bronze and brass) Heat resistant alloys 15-75 (Nie) S Heat resistant alloys (NiCo) 15-40 he data given is only approximate values. It can be necessary to adjust this data to the individual machining operation. Grade description PV coated carbide substrate with high heat and oxidation resistance. Universal grade for machining steel, stainless steel and cast materials. ISO Material Max. depth of cut a p [mm] P M K N Steel 0,5 Stainless Steel 0,3 Cast 0,3 Non ferrous, Aluminium 1,0 Application eed rate range Grooving 0,01-0,02 Boring, turning and copying 0,02-0,05 Pre grooving, chamfering and Back turning 0,02-0,05 Axial grooving 0,02-0,05
AMS ANO -Mini-System A p p l ic ation re c om mendati on» Application Material 1.2343 mit 800 N/mm2 ecommended cutting data Solution evolution n [rev/min] eed rate range f [mm/rev] Pre machining, drilling Ø mm SC-0023SP-05 3800 0,03 Pre machining, drilling Ø 6 mm SPC0060-0300 VHM / ialn 4200 0,1 urning to core diameter for M8 AMS--590802-200.60 4200 0,04 AMS-S-59151800-200.60 4200 0,02 AMS-G-M8-200.60 1640 1,25 AMS-K-591802-200.60 3800 0,02-0,04 elief groove, thread hread M8 urning, orm 15 AMS-16S_ENG-oP.indd 15 11..20 11:22:58 Uhr
simplex.de ANO -Werkzeuge : ools and inserts for parting and grooving ooling and indexable inserts : for turning and threading Milling cutters and indexable inserts : for milling and thread milling rilling tools and indexable inserts : for drilling High-pressure machine jaw vice : : Work holding tools as well as special tooling and complete package tooling for turning lathes and machining centers. or further information please ask for our complete catalogue. Please contact us. www.arno.de Karl-Heinz Arnold GmbH Karlsbader Str. 4. - 73760 Ostfildern on + 49 (0) 711/34 802-0 ax + 49 (0) 711/34 802-130 info@arno.de www.arno.de ANO (UK) imited Unit 3, Sugnall Business Centre Sugnall, Eccleshall. Staffordshire. S21 6N + 44 01785 850 072. + 44 01785 850 076 sales@arno.de. www.arno-tools.co.uk ANO Italia S.r.l Via iume 13. 20059 Vimercate (MB) + 39 039/68 52 1. + 39 039/60 83 724 info@arno-italia.it. www.arno-italia.it ANO Swiss S.A. Schanzstraße 1. CH-8330 Pfäffikon ZH + 41 449 50 19 88. + 41 449 50 19 90 info@arno-swiss.ch. www.arno-swiss.ch ANO - ouse USA,..C. 11 W. iggins St.. US-60033 Harvard, Illinois + 1-815-943-4426. + 1-815-943-7156 info@arno-rouse.com. www.arno-rouse.com ANO U td. B.Nizhegorodskaya Str.81. Office 809. US-600000 Vladimir / + 7(4922) 49-04-20. сот + 7(920) 928-80-81 info@arnoru.ru. www.arnoru.ru