AC Motors Selection and Pricing Guide

AC Selection and Pricing Guide Catalog D81.2, U.S./Canada 2009-2010 NEMA and IEC Answers for Industry.

The world s most efficient line of low voltage AC motors. Siemens NEMA and IEC motors are designed to provide maximum durability, performance, efficiency, reliability, and availability.

Table of Contents Introduction Table of Contents... 1-1 Disclaimer... 1-5 NEMA Motor Features at a Glance... 1-6 IEC Motor Features at a Glance... 1-10 Wide Selection of... 1-12 Cancellation Charges & Change Notices... 1-13 Warranty Procedure... 1-14 General Purpose GP10A...2-1 High Efficiency (Cast Aluminum Frame) Horizontal, Foot Mounted...2-2 C-Face, Horizontal, Foot Mounted...2-3 C-Face, Horizontal, Footless...2-5 GP10...2-7 High Efficiency (Cast Iron Frame) Horizontal, Foot Mounted...2-8 C-Face, Horizontal, Foot Mounted...2-12 C-Face, Horizontal, Footless...2-13 RGZP...2-15 High Efficiency (Cast Iron Frame) Horizontal, Foot Mounted...2-16 GP100A...2-18 NEMA Premium Efficiency (Cast Aluminum Frame/Aluminum Rotor) Horizontal, Foot Mounted...2-19 NEMA Premium Efficiency Plus (Cast Aluminum Frame/Copper Rotor) Horizontal, Foot Mounted...2-21 GP100...2-22 NEMA Premium Efficiency (Cast Iron Frame/Aluminum Rotor) Horizontal, Foot Mounted...2-23 C-Face, Horizontal, Footless...2-24 NEMA Premium Efficiency Plus (Cast Iron Frame/Copper Rotor) Horizontal, Foot Mounted...2-26 C-Face, Horizontal, Footless...2-27 (GP )...2-28 (RGZP )...2-31 Options (GP )...2-33 2009-2010 Low Voltage AC Selection and Pricing Guide 1-1

Table of Contents Introduction Table of Contents... 1-1 Disclaimer... 1-5 NEMA Motor Features at a Glance... 1-6 IEC Motor Features at a Glance... 1-10 Wide Selection of... 1-12 Cancellation Charges & Change Notices... 1-13 Warranty Procedure... 1-14 General Purpose GP10A...2-1 High Efficiency (Cast Aluminum Frame) Horizontal, Foot Mounted...2-2 C-Face, Horizontal, Foot Mounted...2-3 C-Face, Horizontal, Footless...2-5 GP10...2-7 High Efficiency (Cast Iron Frame) Horizontal, Foot Mounted...2-8 C-Face, Horizontal, Foot Mounted...2-12 C-Face, Horizontal, Footless...2-13 RGZP...2-15 High Efficiency (Cast Iron Frame) Horizontal, Foot Mounted...2-16 GP100A...2-18 NEMA Premium Efficiency (Cast Aluminum Frame/Aluminum Rotor) Horizontal, Foot Mounted...2-19 NEMA Premium Efficiency Plus (Cast Aluminum Frame/Copper Rotor) Horizontal, Foot Mounted...2-21 GP100...2-22 NEMA Premium Efficiency (Cast Iron Frame/Aluminum Rotor) Horizontal, Foot Mounted...2-23 C-Face, Horizontal, Footless...2-24 NEMA Premium Efficiency Plus (Cast Iron Frame/Copper Rotor) Horizontal, Foot Mounted...2-26 C-Face, Horizontal, Footless...2-27 (GP )...2-28 (RGZP )...2-31 Options (GP )...2-33 SD10...3-1 High Efficiency Horizontal, Foot Mounted...3-2 C-Face, Horizontal, Footless...3-8 RGZESD...3-10 1-2 2009-2010 Low Voltage AC Selection and Pricing Guide

Table of Contents High Efficiency Horizontal, Foot Mounted...3-11 SD10 MS...3-15 High Efficiency (1 Winding Variable Torque) Horizontal, Foot Mounted...3-16...3-18 NEMA Premium Efficiency (Aluminum Rotor) Horizontal, Foot Mounted...3-19 C-Face, Horizontal, Footless...3-23 NEMA Premium Efficiency Plus (Copper Rotor) Horizontal, Foot Mounted... 3-25 C-Face, Horizontal, Footless... 3-26 RGZEESD... 3-27 NEMA Premium Efficiency Horizontal, Foot Mounted... 3-28... 3-33 NEMA Premium Efficiency (Aluminum Rotor) Horizontal, Foot Mounted... 3-34 NEMA Premium Efficiency Plus (Copper Rotor) Horizontal, Foot Mounted... 3-41 RGZEESDX... 3-42 NEMA Premium Efficiency Horizontal, Foot Mounted... 3-43 (SD )... 3-48 (RGZ )... 3-51 Options (SD )... 3-54 Duty RGZZESD... 4-1 Class I, Group D, Class II, Groups F & G, Division 1 Horizontal, Foot Mounted... 4-2 C-Face, Vertical with Drip Cover, Footless... 4-6 RGZZESD ID1... 4-7 Class I, Group D, Division 1 T2A, 1.15SF Horizontal, Foot Mounted... 4-8 C-Face, Vertical with Drip Cover, Footless... 4-10 (XP )... 4-11 Options (XP )... 4-13 Duty RGZESDI... 5-1 10:1 Constant Torque Horizontal, Foot Mounted... 5-2 RGKESDI & RGZESDI... 5-4 1000:1 Constant Torque Horizontal, Foot Mounted... 5-5 RGZZESDI... 5-7 Class I, Group D, Class II, Groups F & G, Division 1 Horizontal, Foot Mounted... 5-8 ( Duty)... 5-10 2009-2010 Low Voltage AC Selection and Pricing Guide 1-3

Table of Contents Options ( Duty)... 5-12 Purpose Vertical Solid Shaft Normal Thrust RGZVESD... 6-1 RGZZVESD... 6-4 Class I, Group D, Division 1... 6-5 Vertical Solid Shaft In Line Thrust RGZVILESD... 6-7 RGZZVILESD... 6-9 Class I, Group D, Division 1... 6-10 (Vertical )... 6-11 Options (Vertical )... 6-13 IEC Standard 1LA7... 7-1 Standard Efficiency (Cast Aluminum Frame) B3 - Foot Mounted... 7-2 B3 - Foot Mounted and PTC (A11)... 7-4 B5 - Flange, Footless (w/o canopy)... 7-6 B14 - Flange, Footless (w/o canopy)... 7-8 1LA6... 7-10 Standard Efficiency (Cast Iron Frame) B3 - Foot Mounted... 7-11 1LA9... 7-12 High Efficiency (Cast Aluminum Frame) B3 - Foot Mounted... 7-13 B3 - Foot Mounted and PTC (A11)... 7-14 B5 - Flange, Footless (w/o canopy)... 7-15 B14 - Flange, Footless (w/o canopy)... 7-16 1LG6... 7-17 High Efficiency (Cast Iron Frame) B3 - Foot Mounted... 7-18 B3 - Foot Mounted and PTC (A11)... 7-19 Options (IEC Standard )... 7-20 IEC EX... 7-24 1MJ6 Explosion Proof B3 - Foot Mounted... 7-25 1MJ7 Explosion Proof B3 - Foot Mounted... 7-27 Options (IEC Explosion Proof )... 7-28 Introduction... 8-1 Overview... 8-4 s... 8-8 Accessories... 8-10 1-4 2009-2010 Low Voltage AC Selection and Pricing Guide

Table of Contents Options Introduction... 9-1 Options Overview... 9-2 s... 9-8 Technical Notes... 10-1 General Purpose & High Efficiency GP10A / GP10 / SD10... 10-2 NEMA Premium Efficiency (Aluminum Rotor) GP100A, GP100,,... 10-4 NEMA Premium Efficiency Plus (Copper Rotor) GP100A, GP100,,... 10-6 Multi-Speed SD10 MS... 10-9 & Duty RGZZESD, RGZZESD ID1, RGZZESDI... 10-10 Duty RGZESDI 10:1 Constant Torque... 10-14 RGKESDI & RGZESDI 1000:1 Constant Torque... 10-16 Purpose Vertical RGZVESD, RGZVILESD... 10-18 1LA7 400V 50Hz... 10-20 1LA6 400V 50Hz... 10-22 1LA9 400V 50Hz... 10-23 460V 60Hz... 10-24 1LG6 400V 50Hz... 10-25 460V 60Hz... 10-27 1MJ6 400V 50Hz... 10-28 1MJ7 400V 50Hz... 10-30 Dimensions GP10A-GP100A 140-250... 11-1 GP10 140-440... 11-4 GP100 140-250... 11-10 SD10 140-S440... 11-12 140-S440... 11-18 280-S440... 11-24 RGZP-RGZESD-RGZZESD... 11-32 RGZ(Z)ESDI Fig A TEFC... 11-34 RGZESDI Fig B TEBC with and without Encoder... 11-35 RGZESDI Fig C & D Lake Shore LS56 & Internally Mounted Encoder... 11-36 RGZESDI Fig E Dynapar HS35 Encoder... 11-37 RGZESDI Fig F Lake Shore 8500 Externally Mounted Encoder... 11-38 RGZV(IL)ESD... 11-39 V-Belt Sheave Diagram... 11-40 Conduit Boxes... 11-41 1LA7... 11-48 2009-2010 Low Voltage AC Selection and Pricing Guide 1-5

Siemens NEMA Three Phase Integral Horse Power Features at a Glance General Purpose GP10A See Page 2-1 GP10 See Page 2-7 GP100A See Page 2-18 GP100 See Page 2-22 Mechanical Electrical Enclosure General Purpose - TEFC General Purpose - TEFC General Purpose - TEFC General Purpose - TEFC Efficiency High High NEMA Premium / NEMA Premium Plus NEMA Premium / NEMA Premium Plus Thrust N/A N/A N/A N/A HP Range 1-20 1-200 1-20 1-20 Frame Size 140-250 140-440 140-250 140-250 Frequency 60 Hertz 60 Hertz 60 Hertz 60 Hertz Power 3 - Phase 3 - Phase 3 - Phase 3 - Phase Voltage 208-230/460 & 575 208-230/460 & 575 20HP 208-230/460 & 575 208-230/460 & 575 20HP < 230/460, 575 <100HP 460V 100HP Service Factor (sine wave) 1.15 1.15 1.15 1.15 Electrical Design NEMA design B NEMA design B NEMA design B NEMA design B Stator Windings Copper - Random Wound Copper - Random Wound Copper - Random Wound Copper - Random Wound Insulation Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Temperature Rise (sine wave) Class B @ 1.0SF, Class F @ 1.15SF Class B @ 1.0SF, Class F @ 1.15SF Class B @ 1.0SF, Class F @ 1.15SF Class B @ 1.0SF, Class F @ 1.15SF Warranty 18 Months 18 Months 18 Months 18 Months Frame Cast aluminum with bolted Cast iron Cast aluminum with Cast iron feet bolted feet End Shields Cast aluminum Cast iron Cast aluminum Cast iron Conduit Box Cast aluminum Cast aluminum Cast aluminum Cast aluminum Lead Seal Gasket Neoprene (o-rings) Neoprene Neoprene (o-ring) Neoprene Fan Cover Plastic Plastic Plastic Plastic Cooling Fan Bi-directional - polypropylene Bi-directional - polypropylene Bi-directional - polypropylene Bi-directional - polypropylene Drip Cover N/A N/A N/A N/A Rotor Die cast aluminum Die cast aluminum Die Cast Aluminum / Copper Die Cast Aluminum / Copper Shaft High strength carbon steel (C1045) High strength carbon steel (C1045) High strength carbon steel (C1045) High strength carbon steel (C1045) Bearing Type Sealed for life 140-250 Sealed for life 280-440 Single Shielded Sealed for life Double Shielded Bearing Inner Cap No No No No Shaft Seal / Slinger V-ring slinger - DE only V-ring slinger - DE only V-ring slinger - DE only V-ring slinger - DE only Lubrication Polyurea Polyurea Polyurea Polyurea Lube Inlet Fittings NA 280-440 Alemite NA NA Lube Relief Fittings NA 280-440 Plug NA NA Condensation Drain Drain holes - lowest Drain holes - lowest point (2) Drain holes - lowest point (2) Drain holes - lowest point (2) point (2) 400-440 T-Drain Hardware Zinc plated Zinc plated Zinc plated Zinc plated Lifting Eyebolt Cast in ( > 75 lbs ) > 75 lbs Cast in ( > 75 lbs) > 75 lbs Nameplate Aluminum - engraved Aluminum - engraved Aluminum - engraved Aluminum - engraved Paint Epoxy enamel RAL7030 - Stone Gray Epoxy enamel RAL7030 - Stone Gray Epoxy enamel RAL7030 - Stone Gray Epoxy enamel RAL7030 - Stone Gray Vibration 0.15 IPS 0.15 IPS 0.15 IPS 0.15 IPS 1-6 2009-2010 Low Voltage AC Selection and Pricing Guide

SD10 See Page 3-1 See Page 3-18 IEEE 841 See Page 3-33 - TEFC - TEFC / IEEE 841 (2001) - TEFC High NEMA Premium / NEMA Premium Plus NEMA Premium / NEMA Premium Plus N/A N/A N/A 1-400 1-400 1-400 140-S440 140-S440 140-S440 60 Hertz 60 Hertz 60 Hertz 3 - Phase 3 - Phase 3 - Phase 208-230/460 & 575 20HP 208-230/460 & 575 20HP 460 & 575 20HP < 230/460, 575 <100HP 460V 100HP 20HP < 230/460, 575 <100HP 460V 100HP 1.15 1.15 1.15 NEMA design B NEMA design B NEMA design B Copper - Random Wound Copper - Random Wound Copper - Random Wound Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Class B @ 1.0F, Class F @ 1.15SF Class B @ 1.0SF, Class F @ 1.15SF Class B @ 1.0SF, Class F @ 1.15SF 3 Years 3 Years 5 Years Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Neoprene Neoprene Neoprene Cast iron Cast iron Cast iron Bi-directional - polypropylene S440 Locked & Keyed Bronze Bi-directional - polypropylene S440 Locked & Keyed Bronze Bi-directional - polypropylene S440 Locked & Keyed Bronze N/A N/A N/A Die cast aluminum Die Cast Aluminum / Copper Die Cast Aluminum / Copper High strength carbon steel (C1045) High strength carbon steel (C1045) High strength carbon steel (C1045) 140-250 Double Shielded 280-440 Single Shielded Regreasable inlet & outlet Cast iron 250-440 Stationary Bearing Caps Double Shielded 280-440 Single Shielded Regreasable inlet & outlet Cast iron 250-440 Stationary Bearing Caps Single Shielded 280-440 Single Shielded Regreasable inlet & outlet Cast iron 250-440 Stationary Bearing Caps V-ring slinger - DE and ODE V-ring slinger - DE and ODE Inpro/Seal Bearing Isolator DE & ODE Polyurea Polyurea Polyurea Alemite Alemite Alemite Plug Plug Pressure relief T - drains - lowest point (2) T-drains - lowest point (2) T-drains - lowest point (2) Zinc plated Zinc plated Zinc plated > 75 lbs > 75 lbs > 75 lbs Stainless steel - engraved Stainless steel - engraved Stainless steel - embossed Epoxy enamel RAL7030 - Stone Gray Epoxy enamel RAL7030 - Stone Gray Epoxy enamel RAL7030 - Stone Gray 0.08 IPS (2, 4, 6 pole) 0.06 IPS (8 pole) 0.08 IPS 0.06 IPS 2009-2010 Low Voltage AC Selection and Pricing Guide 1-7

Siemens 3AC Integral Horse Power Features at a Glance Duty RGZZESD See Page 4-1 RGZZESD 1D1 See Page 4-7 Mechanical Electrical Mechanical Electrical Enclosure Duty - TEFC Duty - TEFC Efficiency High High Thrust N/A N/A HP Range 1-300 1-400 Frame Size 140-440 140-S440 Frequency 60 Hertz 60 Hertz Power 3 - Phase 3 - Phase Voltage 230/460 460 460 only 25HP and above Service Factor (sine wave) 1.0 1.15 (sine wave), 1.0 (VFD) Electrical Design NEMA design B NEMA design B (except for derates) Stator Windings Copper - Random Wound Copper - Random Wound Insulation Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Temperature Rise (sine wave) Class B @ 1.0SF & Class F @ 1.15SF Class B @ 1.0SF & Class F @ 1.15SF Warranty 3 Years 3 Years Frame Cast Iron Cast Iron End Shields Cast Iron Cast Iron Conduit Box Cast Iron Cast Iron Lead Seal Gasket Neoprene Fan Cover Cast Iron Cast Iron Cooling Fan Bi-directional, Polypropylene Bi-directional, Polypropylene Drip Cover N/A N/A Rotor Die Cast Aluminum Die Cast Aluminum Shaft High Strength Carbon Steel (C1045) High Strength Carbon Steel (C1045) Bearing Type Single Shielded Single Shielded Bearing Inner Cap Stationary Bearing Caps Stationary Bearing Caps Shaft Seal / Slinger 140-250 Shaft Seal DE 140-250 Shaft Seal DE 280-440 V-Ring Slinger DE 280-440 V-Ring Slinger DE Lubrication Polyurea Polyurea Lube Inlet Fittings Alemite Alemite Lube Relief Fittings Plug Plug Condensation Drain 400-440 Only T-Drain Hardware Zinc Plated Zinc Plated Lifting Eyebolt 140-180 Provisions 210-440 Included 140-180 Provisions 210-440 Included Nameplate Stainless Steel - Engraved Stainless Steel - Engraved Paint Epoxy Enamel RAL7030 - Stone Gray Epoxy Enamel RAL7030 - Stone Gray Vibration 0.08 IPS 0.06 IPS 1-8 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty Purpose - Vertical RGZESDI See Pages 5-1. 5-4 RGZZESDI See Page 5-7 RGZVESD See Page 6-1 RGZVILESD See Page 6-9 Severe / Duty - TEFC / Duty - TEFC - TEFC - TEFC High High High High N/A N/A Normal In-Line 1-400 1-200 1-250 3-250 140-S440 140-440 140-440 180-440 60 Hertz 60 Hertz 60 Hertz 60 Hertz 3 - Phase 3 - Phase 3 - Phase 3 - Phase 460 460 230/460 230/460 1.15 (sine wave), 1.0 (VFD) 1.0 1.15 1.15 NEMA design B NEMA design B NEMA design B NEMA design B (except for derates) (except for derates) Copper - Random Wound Copper - Random Wound Copper - Random Wound Copper - Random Wound Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Class F Meets NEMA MG1-2006, Part 31 Class B @ 1.0SF & Class B @ 1.0SF Class B @ 1.05F, Class F @ 1.15SF Class B @ 1.0SF, Class F @ 1.15SF Class F @ 1.15SF 3 Years 3 Years 3 Years 3 Years Cast Iron Cast Iron Cast iron Cast iron Cast Iron Cast Iron Cast iron Cast iron Cast Iron Cast Iron Cast iron Cast iron Neoprene Neoprene Neoprene Cast Iron Cast Iron Cast iron Cast iron Bi-directional, Polypropylene Bi-directional, Polypropylene Bi-directional - polypropylene Bi-directional - polypropylene N/A N/A Steel Cast Iron Die Cast Aluminum Die Cast Aluminum Die cast aluminum Die cast copper High Strength Carbon Steel (C1045) High Strength Carbon Steel High strength carbon steel (C1045) High strength carbon steel (C1045) (C1045) Single Shielded Single Shielded DE: 140-250 / ODE: 140-360 - Open DE: 280-360 Single Shielded DE & NDE: 400 Double Shielded DE: 440 Open / ODE: Single Shielded DE: 180-250 Open 280-440 Double Shielded NDE: 180-440 Duplex angular contact Thrust bearing Stationary Bearing Caps Stationary Bearing Caps Stationary Bearing Caps Stationary Bearing Caps 140-250 Shaft Seal DE 280-440 V-Ring Slinger DE 140-250 Shaft Seal DE 280-440 V-Ring Slinger DE 140-250 Shaftt Seal 280-360 None 400-440 V-Ring Slinger V-ring slinger - DE and ODE Polyurea Polyurea Polyurea Polyurea Alemite Alemite Alemite Alemite Plug Plug Plug Plug T-Drain 400-440 Only T - drains T-drains Zinc Plated Zinc Plated Zinc plated Zinc plated 140-180 Provisions 140-180 Provisions 140-440 Included 180-440 Included 210-440 Included 210-440 Included Stainless Steel - Engraved Stainless Steel - Engraved Stainless Steel - Engraved Stainless Steel - Engraved Epoxy Enamel RAL7030 - Stone Gray Epoxy Enamel RAL7030 - Stone Gray Epoxy Enamel RAL7030 - Stone Gray Epoxy Enamel RAL7030 - Stone Gray 0.06 IPS 0.06 IPS 0.08 IPS 0.08 IPS 2009-2010 Low Voltage AC Selection and Pricing Guide 1-9

Siemens IEC Features at a Glance IEC 1LA7 See Page 7-1 1LA6 See Page 7-10 Mechanical Electrical Enclosure TEFC TEFC Efficiency eff2 eff2 HP / kw Range 60Hz: 0.07-21.3 kw 60Hz: 0.86-21.3 kw 50Hz: 0.12-18.5 kw 50Hz: 0.75-18.5 Frame Size 56-160 100-160 Frequency 50 and 60 Hertz 50 Hertz Power 3 - Phase 3 - Phase Voltage 230/400 @ 50 Hertz, 230/400 460V @ 60 Hertz Service Factor (sine wave) Stock 1.1 1.0 Electrical Design Design N Design N Stator Windings Copper - Random Wound Copper - Random Wound Insulation Class F Class F Temperature Rise Class B @ 1.0SF, Class B @ 1.0SF, Class F @ 1.1SF Class F @ 1.1SF Warranty 12/18 month 12/18 month Frame Cast Aluminum Cast Iron Endshields Cast Aluminum Cast Iron Conduit Box Aluminum Alloy Cast Iron Lead Seal Gasket Neoprene Neoprene Fan Cover Corrosion Protected Steel Plate Corrosion Protected Steel Plate Cooling Fan Plastic Plastic Rotor Die Cast Aluminum Die Cast Aluminum Bearing Type Double Shielded Double Shielded Protection Design IP55 IP55 Lubrication Lithium Lithium Lube Inlet Fittings Sealed Bearings Sealed Bearings Condensation Drain Optional Optional Hardware Zinc Plated Zinc Plated Lifting Eyebolt 30 kg and above 30 kg and above Nameplate Stainless Steel Stainless Steel Paint RAL 7030 World wide finish RAL 7030 World wide finish Vibration Acc. to DIN EN 60034-14 Vibration Grade A Vibration Grade A 1-10 2009-2010 Low Voltage AC Selection and Pricing Guide

1LA9 See Page 7-12 1LG6 See Page 7-17 1MJ See Page 7-24 TEFC TEFC TEFC eff1 eff1 eff2 60Hz: 1/6-25 HP 60Hz: 25-300 HP 60Hz: 0.10-152kW 50Hz: 0.16-18.5 kw 50Hz: 18.5-250kW 50Hz: 0.37-132kW 56-160 180-315 71-315 50 and 60 Hertz 50 and 60 Hertz 50 Hertz 3 - Phase 3 - Phase 3 - Phase 230/400 @ 50 Hertz, 230/400 @ 50 Hertz, 230/400 460V @ 60 Hertz 460V @ 60 Hertz Stock 1.15 Stock 1.15 1.0 Design N Design N Design N Copper - Random Wound Copper - Random Wound Copper - Random Wound Class F Class F Class F Class B @ 1.0SF, Class B @ 1.0SF, Class B @ 1.0SF Class F @ 1.15SF Class F @ 1.15SF 12/18 month 12/18 month 12/18 month Cast Aluminum Cast Iron Cast Iron Cast Aluminum Cast Iron Cast Iron Aluminum 180-225, Aluminum Alloy 250-315, Cast Iron Neoprene Neoprene Neoprene 71-132, 180-225 Aluminum Alloy 160, 250-315, Cast Iron Corrosion Protected Steel Plate Glass Reinforced Plastic Corrosion Protected Steel Plate Plastic Plastic 71-315: Plastic Die Cast Aluminum Die Cast Aluminum Die Cast Aluminum 180-250: Single Shielded 280-315: Regreasable Double Shielded IP55 IP55 IP55 Lithium Lithium Lithium 71-80: Single Shielded 90-250: Shielded 280-315: Regreasable Sealed Bearings Up To 250: Sealed Bearings Up To 250: Sealed Bearings 280 and above: Flat Type Nipple 280 and above: Flat Type Nipple Optional Standard Not Permitted Zinc Plated Zinc Plated Zinc Plated 30 kg and above 30 kg and above 30 kg and above Stainless Steel Stainless Steel Aluminum RAL 7030 World wide finish RAL 7030 Standard finish 71-200: RAL 7030 World wide finish 225-315:RAL 7030 Standard finish Vibration Grade A Vibration Grade A Vibration Grade A 2009-2010 Low Voltage AC Selection and Pricing Guide 1-11

Introduction Wide Selection of General Purpose Duty Wide Selection Providing value also means having the right motor for the job. At Siemens, we offer hundreds of motor types, sizes, ratings and modifications. And, as you read these words, we are adding to this list as part of our commitment to become your single source for motors. The Right Efficiency for Your Application To meet your cost of ownership and motor management needs, Siemens offers several levels of energy efficiency in many of its motors: High NEMA Premium NEMA Premium Plus Total er Support When you re looking for a motor, look for a highly trained specialist to help you match the right motor to your specific needs. Siemens sales engineers share the knowledge, training and experience to help you solve performance or installation challenges to ensure that you will receive the best value for your investment. Our customer service center takes pride in putting our customers first. Whether it s an expedited shipment, tracking your order, or making sure your motor is properly installed, these professionals won t be satisfied until you are. Iron-Clad Quality The quality of our motors begins with the design experience we have gained through more than 100 years of manufacturing and applying motors. We build on this experience every day with new designs that incorporate the latest materials and techniques to provide even higher levels of performance, operating efficiency and reliability. Duty The World's Most Energy Efficient Line of Lower your energy costs today with the world's most energy efficient line of motors. New regulatory standards and rising energy costs create increasing pressure to maximize energy efficiency and reduce your carbon footprint. Siemens breakthrough copper-rotor motors have set new standards for efficiency. Adding copper to the stator windings, Siemens has developed motors that can withstand the heat. Two-thirds of an AC induction motor's electrical loss occurs in the stator. The addition of the copper rotor reduces wasteful, resistive heating. Copper's volumetric electrical conductivity is approximately 66% higher than aluminum. Availability Siemens has hundreds of distributor stocking locations throughout North America with a wide selection of NEMA and IEC frame sizes and ratings. are available same day from a local source you can trust. These advanced motor designs are manufactured in a state-of-the-art ISO 9001 certified facility. Here, our manufacturing technicians subject each motor to more than 100 separate quality inspections before it leaves our plant...and before it is good enough to be offered to you. These distributors are supported by multiple stocking centers and our customer service centers in Little Rockland Cincinnati. Need something special? Our modification centers have complete motor modification capabilities to help you get the exact motor you need, when you need it. Dimensions Purpose 1-12 2009-2010 Low Voltage AC Selection and Pricing Guide

Cancellation Charges & Change Notices Cancellation Charges Note: A minimum charge of $100 will be assessed for any order cancellation for modified or custom motors. Stock No charges will be incurred if an order is cancelled prior to shipment. A stock motor is returnable (freight paid by purchaser) immediately after shipment if returned in new condition (original, undamaged packaging) for a minimum restocking charge of 20% of the motor net price. Non-Stock For non-stock motors, the following graph will apply to determine cancellation charges after the order is received and entered at the factory. Completion progress will be determined by a Siemens er Service Representative. A charge of 15% of the total net motor price will be assessed if an order is cancelled after it has been released for engineering and drafting whether or not the drawings have been completed and/or submitted for approval. Change Notice All change notices applied to in-process orders logged into the Siemens customer service department and requiring a product change will be subject to a $100 net charge plus the applicable modification adder. Delivery dates will be adjusted according to the type of change/ modification requested. This policy does not pertain to commercial changes such as ship to or bill to addresses. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 1-13 Dimensions

Introduction Warranty Procedure General Purpose Duty Duty Purpose Dimensions Standard Terms & Conditions of Sale Warranty - Company warrants that on the date of shipment to purchaser the goods will be of the kind and quality described herein, merchantable, and free of defects in workmanship and material. If within one year from date of operation, but not more than eighteen months from date of shipment by Company, of any item of the goods, purchaser discovers that such item was not as warranted above and promptly notifies company in written thereof, Company shall remedy such defect by, at Company s option, adjustment, repair, or replacement of the item and any affected part of the goods. Purchaser shall assume all responsibility and expense for removal, reinstallation and freight in connection with the foregoing remedy. The same obligations and conditions shall extend to replacement items furnished by company here under. Company shall have the right of disposal of items replaced by it. Purchaser shall grant Company to determine any defect in the goods. In the event that adjustment, repair or replacement does not remedy the defect, the Company and Purchaser shall negotiate in good faith an equitable adjustment in the contract price. (Service calls and overtime are not covered under Siemens warranty policy). The Company s responsibility does not extend to any item of the goods which has not been manufactured and sold by Company. Such item shall be covered only by express warranty, if any, of the manufacture thereof. The Company and its suppliers shall also have no responsibility if the goods have been improperly stored, handled, or installed or if the goods have not been operated or maintained according to their ratings or according to instructions in Company or supplier furnished manuals, or if unauthorized repairs or modifications have been made to the goods. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES (EXCEPT TITLE), INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, AND CONSTITUTES THE ONLY WARRANTY OF COMPANY WITH RESPECT TO THE GOODS. The foregoing states Purchasers exclusive remedy against Company and its suppliers for any defect in the goods or for failure of the goods to be as warranted, whether Purchaser s remedy is based on contract, warranty, failure of such remedy to achieve its essential purpose, tort (including negligence), indemnity or any other legal theory, and whether arising out of warranties, representations, instructions, installations or defects from any cause. Warranty Type A. 1 Year Standard Warranty Initial Operation 18 Months After shipment from manufacturer RG, RGE, RGE1, RGZP, RGZPSD, RGZAD, RGZE Single Phase GP10A, GP10, GP100A, GP100, 3 Years After shipment from manufacturer ESD only, RGZESD, RGZVILESD, RGZZESD, RGZEESD, HSRGZVESD, SD10, 5 Years After shipment from manufacturer RGZESDX, RGZEESDX, B. Remedy Siemens Options Repair Replace C. Purchaser's Responsibility Transportation Damage Claims Removal Freight Installation D. Specifically Excludes Improper Storage In & Out Costs Transportation Damage E. Shipment (Normal) FOB our dock Freight Allowed 1-14 2009-2010 Low Voltage AC Selection and Pricing Guide

Warranty Procedure REFERENCE NOTES 1. After the inspection, contact Little Rock Plant for authorization of repair or replacement. Unapproved repairs will be denied. 2. Removal, reinstallation, freight and service calls are NOT covered by warranty. 3. A standard EASE Warranty report must be filled out and a Siemens job/p.o. # issued. The Warranty report and nameplate (if motor scrapped in the field) plus the invoice must be sent to the Little Rock Plant. 4. Premium efficiency motors will modify major repair pricing by increasing schedule 10%. 5. Allowances listed are for open drip-proof and totally enclosed, non-ventilated motors with class B or F insulation and all voltages between 100 and 600 volts. For variations consult factory. 6. Minor repairs-consist of all the operations listed under minor repairs plus the cost of material and rewinding of stator. If no allowance is shown, consult the factory. 7. Major repairs-consist of all the operations listed under major repairs plus the cost of material and rewinding of stator. If no allowance is shown, consult the factory. 8. Shaded areas represent units that will be replaced when possible, without repairs. 9. Replacement Parts-will be furnished at no Charge from the factory, i.e. bearings for 40 HP and above. 10. Replacement -will be furnished at no Charge from the factory. Should it be necessary for reasons of expediency for the service shop to replace a motor from their stock, a replacement motor will be furnished at no Charge from the factory, shipped Freight allowed. 11. Defective parts, i.e. bearings, are subject to return upon request to the factory for inspection and approval for reimbursement. DATE CODING Siemens motors are date coded by the model number/date code/serial number on the nameplate. Siemens date codes for NEMA frame size, low voltage motors built in USA and Mexico is as follows: The first digit is alphabetic and represents the month. The second and third digits are numeric and are the last two digits of the year. A = January B = February C = March D = April E = May F = June G = July H = August J = September K = October L = November M = December Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 1-15 Dimensions

Introduction Siemens General Purpose Duty Duty Purpose POWER CONVERSION DIVISION NEMA MOTORS 1 ST call To SEA salesman or sales office by OEM, Distributor or the End user. The following information must be supplied at this time: 1. Sales order number 2. Model or order number from the nameplate of the motor 3. Serial number or date code 4. Complete nameplate data 5. Application (blower, compressor, conveyor etc) 6. Nature of problem (electrical, mechanical etc) 2 nd call By SEA salesman or sales office by OEM, Distributor or the End user. To Siemens Warranty Administrator. Contact numbers: Phone number 501 897 1344 Fax number 678 297 8242 Email Vaughn.watkins@siemens.com Warranty Adminstrator will direct to the nearest recommended Siemens authorized service center. 3 rd call To the recommended Siemens authorized service center. Will direct analyzing of failure / evaluation of problem. If the problem is a manufactures defect, the Siemens Warranty Administrator Will make a determination on what the next step will be. Example ( repair or replace) 4 th call To Siemens customer to update the customer on the action taken by Siemens Vaughn Watkins Warranty Administrator Siemens Energy and Automation Power Conversion Division Little Rock, Ar. 72206 Tel: 501 897 1344 Fax: 678 297 8242 email: Vaughn.Watkins@siemens.com IMPORTANT NOTICE MAIL INVOICE PLUS PROPER WARRANTY REPAIR REPORT TO THE WARRANTY ADMINISTRATOR. IF SIEMENS IS TO BE BILLED FOR OVERTIME, AUTHORIZATION MUST BE OBTAINED FROM WARRANTY ADMINISTRATOR BEFORE OVERTIME WORK IS PERFORMED. MATERIAL AND SERVICES ARE PURCHASED FOR RESALE AND ARE EXEMPT FROM STATE AND LOCAL SALES AND USE TAX. Frames 143-449 Siemens Energy and Automation Power Conversion Division 14000 Dineen Drive Little Rock, Ar. 72206 Tel: 501 897 1344 Fax: 678 297 8242 MOTOR SERVICE PROGRAM SUBJECT TO CHANGE WITHOUT NOTICE! Dimensions 1-16 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose - TEFC GP10A - (Cast Aluminum Frame) GP10A series of TEFC motors is ideal for material handling, pump, fan, compressor and other general purpose industrial applications. Specifications 1 to 20 HP 1.15 service factor, 40 C ambient 3600, 1800, 1200 or 900 RPM 3 phase, 60 Hz; 208-230/460 and 575 volt operation Meets or exceeds EPAct efficiency standards Class F insulation, Class B temperature rise @ 1.0SF NEMA Design B, Continuous Duty 143T through 256T frame Features for Long Life Frame & Bearing Housings Die cast aluminum construction for exceptional heat dissipation and structural integrity. Equipped with bolt-on feet for mounting flexibility. Condensation drain holes provided. Integrally cast lifting eyes. Unique frame fin design maximizes cooling. Rotor A unique rotor design provides improved efficiency. Large cross section bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary, inverterrated, NEMA Class F, non-hygroscopic, insulation system with Class B temperature rise @ 1.0 SF, provides an extra margin of thermal life. Varnish system application ensures maximum ire penetration to provide protection from moisture, corrosion and electrical surges. This insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, nonsparking fan is locked and keyed to the shaft. Its low-inertia design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Polycarbonate fan covers are provided on all frame sizes. Bearings Lubricated for life, oversized, complete with external bearing protection. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast aluminum construction that is larger than industry standards, diagonallysplit and rotatable in 90º increments for quick and easy connections. A ground lug is included. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Die cast aluminum construction, polycarbonate fan and fan cover, zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist corrosion. Modifiable Siemens GP10A motors are available with a variety of modifications and kits. Introduction General Purpose Duty Duty Purpose Specifications table begins on the next page 2009-2010 Low Voltage AC Selection and Pricing Guide 2-1 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose - TEFC GP10A - (Cast Aluminum Frame) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 3600 143T 208-230/460 GP10A Ball 1LE21011AA114AA3 280 GPA1 1.4 80 32 1 3600 143T 575 GP10A Ball 1LE21011AA113AA3 280 GPA1 1.12 80 32 1 1800 143T 208-230/460 GP10A Ball 1LE21011AB214AA3 280 GPA1 1.5 82.5 34 1 1800 143T 575 GP10A Ball 1LE21011AB213AA3 280 GPA1 1.2 82.5 34 1 1200 145T 208-230/460 GP10A Ball 1LE21011AC314AA3 350 GPA1 1.6 80 35 1 1200 145T 575 GP10A Ball 1LE21011AC313AA3 350 GPA1 1.28 80 35 1 900 182T 208-230/460 GP10A Ball 1LE21011CD114AA3 547 GPA1 2.1 74 57 1 900 182T 575 GP10A Ball 1LE21011CD113AA3 547 GPA1 1.64 74 57 1.5 3600 143T 208-230/460 GP10A Ball 1LE21011AA214AA3 288 GPA1 2 82.5 33 1.5 3600 143T 575 GP10A Ball 1LE21011AA213AA3 288 GPA1 1.6 82.5 33 1.5 1800 145T 208-230/460 GP10A Ball 1LE21011AB314AA3 310 GPA1 2.2 84 38 1.5 1800 145T 575 GP10A Ball 1LE21011AB313AA3 310 GPA1 1.76 84 38 1.5 1200 182T 208-230/460 GP10A Ball 1LE21011CC114AA3 373 GPA1 2.4 85.5 54 1.5 1200 182T 575 GP10A Ball 1LE21011CC113AA3 373 GPA1 1.92 85.5 54 1.5 900 184T 208-230/460 GP10A Ball 1LE21011CD314AA3 593 GPA1 3 77 71 1.5 900 184T 575 GP10A Ball 1LE21011CD313AA3 593 GPA1 2.4 77 71 2 3600 145T 208-230/460 GP10A Ball 1LE21011AA314AA3 335 GPA1 2.6 84 35 2 3600 145T 575 GP10A Ball 1LE21011AA313AA3 335 GPA1 2.08 84 35 2 1800 145T 208-230/460 GP10A Ball 1LE21011AB414AA3 336 GPA1 3 84 40 2 1800 145T 575 GP10A Ball 1LE21011AB413AA3 336 GPA1 2.4 84 40 2 1200 184T 208-230/460 GP10A Ball 1LE21011CC314AA3 413 GPA1 3.1 86.5 65 2 1200 184T 575 GP10A Ball 1LE21011CC313AA3 413 GPA1 2.48 86.5 65 2 900 213T 208-230/460 GP10A Ball 1LE21012AD114AA3 683 GPA1 3.3 82.5 75 2 900 213T 575 GP10A Ball 1LE21012AD113AA3 683 GPA1 2.64 82.5 75 3 3600 182T 208-230/460 GP10A Ball 1LE21011CA114AA3 373 GPA1 3.7 85.5 56 3 3600 182T 575 GP10A Ball 1LE21011CA113AA3 373 GPA1 2.96 85.5 56 3 1800 182T 208-230/460 GP10A Ball 1LE21011CB114AA3 385 GPA1 4 87.5 59 3 1800 182T 575 GP10A Ball 1LE21011CB113AA3 385 GPA1 3.2 87.5 59 3 1200 213T 208-230/460 GP10A Ball 1LE21012AC114AA3 530 GPA1 4 87.5 85 3 1200 213T 575 GP10A Ball 1LE21012AC113AA3 530 GPA1 3.36 87.5 85 3 900 215T 208-230/460 GP10A Ball 1LE21012AD214AA3 978 GPA1 4.8 84 89 3 900 215T 575 GP10A Ball 1LE21012AD213AA3 978 GPA1 3.84 84 89 5 3600 184T 208-230/460 GP10A Ball 1LE21011CA314AA3 486 GPA1 6.2 87.5 62 5 3600 184T 575 GP10A Ball 1LE21011CA313AA3 486 GPA1 4.96 87.5 62 5 1800 184T 208-230/460 GP10A Ball 1LE21011CB314AA3 440 GPA1 6.7 87.5 66 5 1800 184T 575 GP10A Ball 1LE21011CB313AA3 440 GPA1 5.36 87.5 66 5 1200 215T 208-230/460 GP10A Ball 1LE21012AC214AA3 791 GPA1 6.8 87.5 100 5 1200 215T 575 GP10A Ball 1LE21012AC213AA3 791 GPA1 5.44 87.5 100 5 900 254T 208-230/460 GP10A Ball 1LE21012BD114AA3 1362 GPA1 8.8 85.5 157 5 900 254T 575 GP10A Ball 1LE21012BD113AA3 1362 GPA1 7.04 85.5 157 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Stock Model 2-2 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

General Purpose - TEFC GP10A - (Cast Aluminum Frame) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 7.5 3600 213T 208-230/460 GP10A Ball 1LE21012AA114AA3 635 GPA1 9 88.5 96 7.5 3600 213T 575 GP10A Ball 1LE21012AA113AA3 635 GPA1 7.2 88.5 96 7.5 1800 213T 208-230/460 GP10A Ball 1LE21012AB114AA3 615 GPA1 9.5 89.5 102 7.5 1800 213T 575 GP10A Ball 1LE21012AB113AA3 615 GPA1 7.6 89.5 102 7.5 1200 254T 208-230/460 GP10A Ball 1LE21012BC114AA3 1010 GPA1 10.5 89.5 163 7.5 1200 254T 575 GP10A Ball 1LE21012BC113AA3 1010 GPA1 8.4 89.5 163 7.5 900 256T 208-230/460 GP10A Ball 1LE21012BD214AA3 1422 GPA1 13 85.5 189 7.5 900 256T 575 GP10A Ball 1LE21012BD213AA3 1422 GPA1 10.4 85.5 189 10 3600 215T 208-230/460 GP10A Ball 1LE21012AA214AA3 749 GPA1 11.5 89.5 113 10 3600 215T 575 GP10A Ball 1LE21012AA213AA3 749 GPA1 9.2 89.5 113 10 1800 215T 208-230/460 GP10A Ball 1LE21012AB214AA3 749 GPA1 12.5 89.5 114 10 1800 215T 575 GP10A Ball 1LE21012AB213AA3 749 GPA1 10 89.5 114 10 1200 256T 208-230/460 GP10A Ball 1LE21012BC214AA3 1187 GPA1 13.5 89.5 175 10 1200 256T 575 GP10A Ball 1LE21012BC213AA3 1187 GPA1 10.8 89.5 175 15 3600 254T 208-230/460 GP10A Ball 1LE21012BA114AA3 979 GPA1 18 90.2 168 15 3600 254T 575 GP10A Ball 1LE21012BA113AA3 979 GPA1 14.4 90.2 168 15 1800 254T 208-230/460 GP10A Ball 1LE21012BB114AA3 956 GPA1 19 91 166 15 1800 254T 575 GP10A Ball 1LE21012BB113AA3 956 GPA1 15.2 91 166 20 3600 256T 208-230/460 GP10A Ball 1LE21012BA214AA3 1211 GPA1 23.5 90.2 179 20 3600 256T 575 GP10A Ball 1LE21012BA213AA3 1211 GPA1 18.8 90.2 179 20 1800 256T 208-230/460 GP10A Ball 1LE21012BB214AA3 1150 GPA1 25 91 185 20 1800 256T 575 GP10A Ball 1LE21012BB213AA3 1150 GPA1 20 91 185 C-Face, Horizontal, Foot Mounted 1 3600 143TC 208-230/460 GP10A Ball 1LE21011AA114EA3 342 GPA1 1.4 80 32 1 3600 143TC 575 GP10A Ball 1LE21011AA113EA3 342 GPA1 1.12 80 32 1 1800 143TC 208-230/460 GP10A Ball 1LE21011AB214EA3 342 GPA1 1.5 82.5 34 1 1800 143TC 575 GP10A Ball 1LE21011AB213EA3 342 GPA1 1.2 82.5 34 1 1200 145TC 208-230/460 GP10A Ball 1LE21011AC314EA3 411 GPA1 1.6 80 35 1 1200 145TC 575 GP10A Ball 1LE21011AC313EA3 411 GPA1 1.28 80 35 1 900 182TC 208-230/460 GP10A Ball 1LE21011CD114EA3 634 GPA1 2.1 74 57 1 900 182TC 575 GP10A Ball 1LE21011CD113EA3 634 GPA1 1.64 74 57 1.5 3600 143TC 208-230/460 GP10A Ball 1LE21011AA214EA3 349 GPA1 2 82.5 33 1.5 3600 143TC 575 GP10A Ball 1LE21011AA213EA3 349 GPA1 1.6 82.5 33 1.5 1800 145TC 208-230/460 GP10A Ball 1LE21011AB314EA3 371 GPA1 2.2 84 38 1.5 1800 145TC 575 GP10A Ball 1LE21011AB313EA3 371 GPA1 1.76 84 38 1.5 1200 182TC 208-230/460 GP10A Ball 1LE21011CC114EA3 461 GPA1 2.4 85.5 54 1.5 1200 182TC 575 GP10A Ball 1LE21011CC113EA3 461 GPA1 1.92 85.5 54 1.5 900 184TC 208-230/460 GP10A Ball 1LE21011CD314EA3 680 GPA1 3 77 71 1.5 900 184TC 575 GP10A Ball 1LE21011CD313EA3 680 GPA1 2.4 77 71 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 2-3 Dimensions

Introduction General Purpose Duty Duty Purpose General Purpose - TEFC GP10A - (Cast Aluminum Frame) HP RPM Frame Voltage Type C-Face, Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 2 3600 145TC 208-230/460 GP10A Ball 1LE21011AA314EA3 396 GPA1 2.6 84 35 2 3600 145TC 575 GP10A Ball 1LE21011AA313EA3 396 GPA1 2.08 84 35 2 1800 145TC 208-230/460 GP10A Ball 1LE21011AB414EA3 397 GPA1 3 84 40 2 1800 145TC 575 GP10A Ball 1LE21011AB413EA3 397 GPA1 2.4 84 40 2 1200 184TC 208-230/460 GP10A Ball 1LE21011CC314EA3 500 GPA1 3.1 86.5 65 2 1200 184TC 575 GP10A Ball 1LE21011CC313EA3 500 GPA1 2.48 86.5 65 2 900 213TC 208-230/460 GP10A Ball 1LE21012AD114EA3 770 GPA1 3.3 82.5 75 2 900 213TC 575 GP10A Ball 1LE21012AD113EA3 770 GPA1 2.64 82.5 75 3 3600 182TC 208-230/460 GP10A Ball 1LE21011CA114EA3 461 GPA1 3.7 85.5 56 3 3600 182TC 575 GP10A Ball 1LE21011CA113EA3 461 GPA1 2.96 85.5 56 3 1800 182TC 208-230/460 GP10A Ball 1LE21011CB114EA3 474 GPA1 4 87.5 59 3 1800 182TC 575 GP10A Ball 1LE21011CB113EA3 474 GPA1 3.2 87.5 59 3 1200 213TC 208-230/460 GP10A Ball 1LE21012AC114EA3 618 GPA1 4 87.5 85 3 1200 213TC 575 GP10A Ball 1LE21012AC113EA3 618 GPA1 3.36 87.5 85 3 900 215TC 208-230/460 GP10A Ball 1LE21012AD214EA3 1066 GPA1 4.8 84 89 3 900 215TC 575 GP10A Ball 1LE21012AD213EA3 1066 GPA1 3.84 84 89 5 3600 184TC 208-230/460 GP10A Ball 1LE21011CA314EA3 573 GPA1 6.2 87.5 62 5 3600 184TC 575 GP10A Ball 1LE21011CA313EA3 573 GPA1 4.96 87.5 62 5 1800 184TC 208-230/460 GP10A Ball 1LE21011CB314EA3 527 GPA1 6.7 87.5 66 5 1800 184TC 575 GP10A Ball 1LE21011CB313EA3 527 GPA1 5.36 87.5 66 5 1200 215TC 208-230/460 GP10A Ball 1LE21012AC214EA3 878 GPA1 6.8 87.5 100 5 1200 215TC 575 GP10A Ball 1LE21012AC213EA3 878 GPA1 5.44 87.5 100 5 900 254TC 208-230/460 GP10A Ball 1LE21012BD114EA3 1471 GPA1 8.8 85.5 157 5 900 254TC 575 GP10A Ball 1LE21012BD113EA3 1471 GPA1 7.04 85.5 157 7.5 3600 213TC 208-230/460 GP10A Ball 1LE21012AA114EA3 723 GPA1 9 88.5 96 7.5 3600 213TC 575 GP10A Ball 1LE21012AA113EA3 723 GPA1 7.2 88.5 96 7.5 1800 213TC 208-230/460 GP10A Ball 1LE21012AB114EA3 704 GPA1 9.5 89.5 102 7.5 1800 213TC 575 GP10A Ball 1LE21012AB113EA3 704 GPA1 7.6 89.5 102 7.5 1200 254TC 208-230/460 GP10A Ball 1LE21012BC114EA3 1119 GPA1 10.5 89.5 163 7.5 1200 254TC 575 GP10A Ball 1LE21012BC113EA3 1119 GPA1 8.4 89.5 163 7.5 900 256TC 208-230/460 GP10A Ball 1LE21012BD214EA3 1531 GPA1 13 85.5 189 7.5 900 256TC 575 GP10A Ball 1LE21012BD213EA3 1531 GPA1 10.4 85.5 189 10 3600 215TC 208-230/460 GP10A Ball 1LE21012AA214EA3 837 GPA1 11.5 89.5 113 10 3600 215TC 575 GP10A Ball 1LE21012AA213EA3 837 GPA1 9.2 89.5 113 10 1800 215TC 208-230/460 GP10A Ball 1LE21012AB214EA3 837 GPA1 12.5 89.5 114 10 1800 215TC 575 GP10A Ball 1LE21012AB213EA3 837 GPA1 10 89.5 114 10 1200 256TC 208-230/460 GP10A Ball 1LE21012BC214EA3 1296 GPA1 13.5 89.5 175 10 1200 256TC 575 GP10A Ball 1LE21012BC213EA3 1296 GPA1 10.8 89.5 175 15 3600 254TC 208-230/460 GP10A Ball 1LE21012BA114EA3 1088 GPA1 18 90.2 168 Stock Model 15 3600 254TC 575 GP10A Ball 1LE21012BA113EA3 1088 GPA1 14.4 90.2 168 Dimensions 15 1800 254TC 208-230/460 GP10A Ball 1LE21012BB114EA3 1064 GPA1 19 91 166 15 1800 254TC 575 GP10A Ball 1LE21012BB113EA3 1064 GPA1 15.2 91 166 20 3600 256TC 208-230/460 GP10A Ball 1LE21012BA214EA3 1320 GPA1 23.5 90.2 179 20 3600 256TC 575 GP10A Ball 1LE21012BA213EA3 1320 GPA1 18.8 90.2 179 20 1800 256TC 208-230/460 GP10A Ball 1LE21012BB214EA3 1259 GPA1 25 91 185 20 1800 256TC 575 GP10A Ball 1LE21012BB213EA3 1259 GPA1 20 91 185 2-4 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

General Purpose - TEFC GP10A - (Cast Aluminum Frame) HP RPM Frame Voltage Type C-Face, Horizontal, Footless DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 3600 143TC 208-230/460 GP10A Ball 1LE21011AA114GA3 358 GPA1 1.4 80 32 1 3600 143TC 575 GP10A Ball 1LE21011AA113GA3 358 GPA1 1.12 80 32 1 1800 143TC 208-230/460 GP10A Ball 1LE21011AB214GA3 358 GPA1 1.5 82.5 34 1 1800 143TC 575 GP10A Ball 1LE21011AB213GA3 358 GPA1 1.2 82.5 34 1 1200 145TC 208-230/460 GP10A Ball 1LE21011AC314GA3 427 GPA1 1.6 80 35 1 1200 145TC 575 GP10A Ball 1LE21011AC313GA3 427 GPA1 1.28 80 35 1 900 182TC 208-230/460 GP10A Ball 1LE21011CD114GA3 662 GPA1 2.1 74 57 1 900 182TC 575 GP10A Ball 1LE21011CD113GA3 662 GPA1 1.64 74 57 1.5 3600 143TC 208-230/460 GP10A Ball 1LE21011AA214GA3 365 GPA1 2 82.5 33 1.5 3600 143TC 575 GP10A Ball 1LE21011AA213GA3 365 GPA1 1.6 82.5 33 1.5 1800 145TC 208-230/460 GP10A Ball 1LE21011AB314GA3 386 GPA1 2.2 84 38 1.5 1800 145TC 575 GP10A Ball 1LE21011AB313GA3 386 GPA1 1.76 84 38 1.5 1200 182TC 208-230/460 GP10A Ball 1LE21011CC114GA3 487 GPA1 2.4 85.5 54 1.5 1200 182TC 575 GP10A Ball 1LE21011CC113GA3 487 GPA1 1.92 85.5 54 1.5 900 184TC 208-230/460 GP10A Ball 1LE21011CD314GA3 708 GPA1 3 77 71 1.5 900 184TC 575 GP10A Ball 1LE21011CD313GA3 708 GPA1 2.4 77 71 2 3600 145TC 208-230/460 GP10A Ball 1LE21011AA314GA3 413 GPA1 2.6 84 35 2 3600 145TC 575 GP10A Ball 1LE21011AA313GA3 413 GPA1 2.08 84 35 2 1800 145TC 208-230/460 GP10A Ball 1LE21011AB414GA3 413 GPA1 3 84 40 2 1800 145TC 575 GP10A Ball 1LE21011AB413GA3 413 GPA1 2.4 84 40 2 1200 184TC 208-230/460 GP10A Ball 1LE21011CC314GA3 527 GPA1 3.1 86.5 65 2 1200 184TC 575 GP10A Ball 1LE21011CC313GA3 527 GPA1 2.48 86.5 65 2 900 213TC 208-230/460 GP10A Ball 1LE21012AD114GA3 797 GPA1 3.3 82.5 75 2 900 213TC 575 GP10A Ball 1LE21012AD113GA3 797 GPA1 2.64 82.5 75 3 3600 182TC 208-230/460 GP10A Ball 1LE21011CA114GA3 487 GPA1 3.7 85.5 56 3 3600 182TC 575 GP10A Ball 1LE21011CA113GA3 487 GPA1 2.96 85.5 56 3 1800 182TC 208-230/460 GP10A Ball 1LE21011CB114GA3 500 GPA1 4 87.5 59 3 1800 182TC 575 GP10A Ball 1LE21011CB113GA3 500 GPA1 3.2 87.5 59 3 1200 213TC 208-230/460 GP10A Ball 1LE21012AC114GA3 645 GPA1 4 87.5 85 3 1200 213TC 575 GP10A Ball 1LE21012AC113GA3 645 GPA1 3.36 87.5 85 3 900 215TC 208-230/460 GP10A Ball 1LE21012AD214GA3 1092 GPA1 4.8 84 89 3 900 215TC 575 GP10A Ball 1LE21012AD213GA3 1092 GPA1 3.84 84 89 5 3600 184TC 208-230/460 GP10A Ball 1LE21011CA314GA3 601 GPA1 6.2 87.5 62 5 3600 184TC 575 GP10A Ball 1LE21011CA313GA3 601 GPA1 4.96 87.5 62 5 1800 184TC 208-230/460 GP10A Ball 1LE21011CB314GA3 554 GPA1 6.7 87.5 66 5 1800 184TC 575 GP10A Ball 1LE21011CB313GA3 554 GPA1 5.36 87.5 66 5 1200 215TC 208-230/460 GP10A Ball 1LE21012AC214GA3 905 GPA1 6.8 87.5 100 5 1200 215TC 575 GP10A Ball 1LE21012AC213GA3 905 GPA1 5.44 87.5 100 5 900 254TC 208-230/460 GP10A Ball 1LE21012BD114GA3 1510 GPA1 8.8 85.5 157 5 900 254TC 575 GP10A Ball 1LE21012BD113GA3 1510 GPA1 7.04 85.5 157 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 2-5 Dimensions

General Purpose - TEFC GP10A - (Cast Aluminum Frame) HP RPM Frame Voltage Type C-Face, Horizontal, Footless - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 7.5 3600 213TC 208-230/460 GP10A Ball 1LE21012AA114GA3 750 GPA1 9 88.5 96 7.5 3600 213TC 575 GP10A Ball 1LE21012AA113GA3 750 GPA1 7.2 88.5 96 7.5 1800 213TC 208-230/460 GP10A Ball 1LE21012AB114GA3 730 GPA1 9.5 89.5 102 7.5 1800 213TC 575 GP10A Ball 1LE21012AB113GA3 730 GPA1 7.6 89.5 102 7.5 1200 254TC 208-230/460 GP10A Ball 1LE21012BC114GA3 1157 GPA1 10.5 89.5 163 7.5 1200 254TC 575 GP10A Ball 1LE21012BC113GA3 1157 GPA1 8.4 89.5 163 7.5 900 256TC 208-230/460 GP10A Ball 1LE21012BD214GA3 1570 GPA1 13 85.5 189 7.5 900 256TC 575 GP10A Ball 1LE21012BD213GA3 1570 GPA1 10.4 85.5 189 10 3600 215TC 208-230/460 GP10A Ball 1LE21012AA214GA3 863 GPA1 11.5 89.5 113 10 3600 215TC 575 GP10A Ball 1LE21012AA213GA3 863 GPA1 9.2 89.5 113 10 1800 215TC 208-230/460 GP10A Ball 1LE21012AB214GA3 863 GPA1 12.5 89.5 114 10 1800 215TC 575 GP10A Ball 1LE21012AB213GA3 863 GPA1 10 89.5 114 10 1200 256TC 208-230/460 GP10A Ball 1LE21012BC214GA3 1335 GPA1 13.5 89.5 175 10 1200 256TC 575 GP10A Ball 1LE21012BC213GA3 1335 GPA1 10.8 89.5 175 15 3600 254TC 208-230/460 GP10A Ball 1LE21012BA114GA3 1126 GPA1 18 90.2 168 15 3600 254TC 575 GP10A Ball 1LE21012BA113GA3 1126 GPA1 14.4 90.2 168 15 1800 254TC 208-230/460 GP10A Ball 1LE21012BB114GA3 1103 GPA1 19 91 166 15 1800 254TC 575 GP10A Ball 1LE21012BB113GA3 1103 GPA1 15.2 91 166 20 3600 256TC 208-230/460 GP10A Ball 1LE21012BA214GA3 1358 GPA1 23.5 90.2 179 20 3600 256TC 575 GP10A Ball 1LE21012BA213GA3 1358 GPA1 18.8 90.2 179 20 1800 256TC 208-230/460 GP10A Ball 1LE21012BB214GA3 1297 GPA1 25 91 185 20 1800 256TC 575 GP10A Ball 1LE21012BB213GA3 1297 GPA1 20 91 185 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Stock Model Dimensions Introduction General Purpose Duty Duty Purpose 2-6 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

General Purpose - TEFC GP10 - (Cast Iron Frame) GP10 motors are ideal for both indoor and outdoor applications and in operating atmospheres that contain moisture, dust and grit. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other general purpose applications. Specifications 1 to 200 HP 1.15 service factor, 40ºC ambient 3600, 1800, 1200 or 900 RPM 3-phase, 60 Hz; 208-230/460 and 575 volt operation (143T 256T) 3-phase, 60 Hz; 230/460 volt operation under 100 HP, 460 volt 100 HP and above, 575 volt available (284T 449T) Meet or exceed EPAct efficiency standards Class F insulation, Class B temperature rise NEMA design B, continuous duty 143T 449T frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation drain holes (143T-256T frames) or condensation T-drains (284T-449T frames) are provided. Lifting eyebolts are included with motors > 75 lbs. Rotor A unique rotor bar design provides improved efficiency. Large cross section bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses. Insulation Proprietary inverter-rated Class F non-hygroscopic insulation system with NEMA Class B temperature rise @ 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. This insulation system meets or exceeds NEMA MG1-2006, Part 31, making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Polycarbonate fan covers are provided on 143T-365T frames and cast iron for frames 404T and larger. Bearings Oversized, lubricated for life (143T-256T frames). Regreasable, oversized, single shielded (284T-449T frames) with cast iron inner caps (444T 449T frames). Alemite grease fittings on the inlets and pipe plugs on the relief ports (284T 449T frames) for ease of routine maintenance. For added bearing protection, motors are equipped with a drive end shaft V-ring slinger. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Larger than industry standards, diagonallysplit, gasketed and rotatable in 90 increments for quick and easy connections. Leads are non-wicking and are clearly and permanently marked. Aluminum construction for frames 143T to 256T, steel for frames 284T to 405T and cast iron for 444T frames and larger. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion. Modifiable & Siemens motors are available with a wide variety of modifications or custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose Specifications table begins on the next page 2009-2010 Low Voltage AC Selection and Pricing Guide 2-7 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose - TEFC GP10 - (Cast Iron Frame) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 3600 143T 208-230/460 GP10 Ball 1LE22011AA114AA3 315 GP1 1.4 80.0 51 1 3600 143T 575 GP10 Ball 1LE22011AA113AA3 315 GP1 1.1 80.0 51 1 1800 143T 208-230/460 GP10 Ball 1LE22011AB214AA3 315 GP1 1.5 82.5 53 1 1800 143T 575 GP10 Ball 1LE22011AB213AA3 315 GP1 1.2 82.5 53 1 1200 145T 208-230/460 GP10 Ball 1LE22011AC314AA3 392 GP1 1.6 80.0 54 1 1200 145T 575 GP10 Ball 1LE22011AC313AA3 392 GP1 1.3 80.0 54 1 900 182T 208-230/460 GP10 Ball 1LE22011CD114AA3 614 GP1 2.1 74.0 86 1 900 182T 575 GP10 Ball 1LE22011CD113AA3 614 GP1 1.6 74.0 86 1.5 3600 143T 208-230/460 GP10 Ball 1LE22011AA214AA3 323 GP1 2.0 82.5 53 1.5 3600 143T 575 GP10 Ball 1LE22011AA213AA3 323 GP1 1.6 82.5 53 1.5 1800 145T 208-230/460 GP10 Ball 1LE22011AB314AA3 347 GP1 2.2 84.0 58 1.5 1800 145T 575 GP10 Ball 1LE22011AB313AA3 347 GP1 1.8 84.0 58 1.5 1200 182T 208-230/460 GP10 Ball 1LE22011CC114AA3 419 GP1 2.4 85.5 83 1.5 1200 182T 575 GP10 Ball 1LE22011CC113AA3 419 GP1 1.9 85.5 83 1.5 900 184T 208-230/460 GP10 Ball 1LE22011CD314AA3 666 GP1 3.0 77.0 99 1.5 900 184T 575 GP10 Ball 1LE22011CD313AA3 666 GP1 2.4 77.0 99 2 3600 145T 208-230/460 GP10 Ball 1LE22011AA314AA3 376 GP1 2.6 84.0 54 2 3600 145T 575 GP10 Ball 1LE22011AA313AA3 376 GP1 2.1 84.0 54 2 1800 145T 208-230/460 GP10 Ball 1LE22011AB414AA3 377 GP1 3.0 84.0 59 2 1800 145T 575 GP10 Ball 1LE22011AB413AA3 377 GP1 2.4 84.0 59 2 1200 184T 208-230/460 GP10 Ball 1LE22011CC314AA3 463 GP1 3.1 86.5 94 2 1200 184T 575 GP10 Ball 1LE22011CC313AA3 463 GP1 2.5 86.5 94 2 900 213T 208-230/460 GP10 Ball 1LE22012AD114AA3 766 GP1 3.3 82.5 123 2 900 213T 575 GP10 Ball 1LE22012AD113AA3 766 GP1 2.6 82.5 123 3 3600 182T 208-230/460 GP10 Ball 1LE22011CA114AA3 419 GP1 3.7 85.5 85 3 3600 182T 575 GP10 Ball 1LE22011CA113AA3 419 GP1 3.0 85.5 85 3 1800 182T 208-230/460 GP10 Ball 1LE22011CB114AA3 433 GP1 4.0 87.5 88 3 1800 182T 575 GP10 Ball 1LE22011CB113AA3 433 GP1 3.2 87.5 88 3 1200 213T 208-230/460 GP10 Ball 1LE22012AC114AA3 595 GP1 4.2 87.5 143 3 1200 213T 575 GP10 Ball 1LE22012AC113AA3 595 GP1 3.4 87.5 143 3 900 215T 208-230/460 GP10 Ball 1LE22012AD214AA3 1098 GP1 4.8 84.0 138 3 900 215T 575 GP10 Ball 1LE22012AD213AA3 1098 GP1 3.8 84.0 138 5 3600 184T 208-230/460 GP10 Ball 1LE22011CA314AA3 546 GP1 6.2 87.5 91 5 3600 184T 575 GP10 Ball 1LE22011CA313AA3 546 GP1 5.0 87.5 91 5 1800 184T 208-230/460 GP10 Ball 1LE22011CB314AA3 494 GP1 6.7 87.5 94 5 1800 184T 575 GP10 Ball 1LE22011CB313AA3 494 GP1 5.4 87.5 94 5 1200 215T 208-230/460 GP10 Ball 1LE22012AC214AA3 888 GP1 6.8 87.5 151 5 1200 215T 575 GP10 Ball 1LE22012AC213AA3 888 GP1 5.4 87.5 151 5 900 254T 208-230/460 GP10 Ball 1LE22012BD114AA3 1530 GP1 8.8 85.5 218 5 900 254T 575 GP10 Ball 1LE22012BD113AA3 1530 GP1 7.0 85.5 218 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZP stock motors are depleted Stock Model 2-8 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

General Purpose - TEFC GP10 - (Cast Iron Frame) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 7.5 3600 213T 208-230/460 GP10 Ball 1LE22012AA114AA3 713 GP1 9.0 88.5 137 7.5 3600 213T 575 GP10 Ball 1LE22012AA113AA3 713 GP1 7.2 88.5 137 7.5 1800 213T 208-230/460 GP10 Ball 1LE22012AB114AA3 691 GP1 9.5 89.5 143 7.5 1800 213T 575 GP10 Ball 1LE22012AB113AA3 691 GP1 7.6 89.5 143 7.5 1200 254T 208-230/460 GP10 Ball 1LE22012BC114AA3 1134 GP1 10.5 89.5 224 7.5 1200 254T 575 GP10 Ball 1LE22012BC113AA3 1134 GP1 8.4 89.5 224 7.5 900 256T 208-230/460 GP10 Ball 1LE22012BD214AA3 1597 GP1 13.0 85.5 250 7.5 900 256T 575 GP10 Ball 1LE22012BD213AA3 1597 GP1 10.4 85.5 250 10 3600 215T 208-230/460 GP10 Ball 1LE22012AA214AA3 841 GP1 11.5 89.5 150 10 3600 215T 575 GP10 Ball 1LE22012AA213AA3 841 GP1 9.2 89.5 150 10 1800 215T 208-230/460 GP10 Ball 1LE22012AB214AA3 841 GP1 12.5 89.5 151 10 1800 215T 575 GP10 Ball 1LE22012AB213AA3 841 GP1 10.0 89.5 151 10 1200 256T 208-230/460 GP10 Ball 1LE22012BC214AA3 1334 GP1 13.5 89.5 236 10 1200 256T 575 GP10 Ball 1LE22012BC213AA3 1334 GP1 10.8 89.5 236 10 900 284T 230/460 GP10 Ball 1LE22012CD116AA3 2311 GP1 12.0 91.0 375 10 900 284T 575 GP10 Ball 1LE22012CD113AA3 2311 GP1 9.6 91.0 375 15 3600 254T 208-230/460 GP10 Ball 1LE22012BA114AA3 1099 GP1 18.0 90.2 228 15 3600 254T 575 GP10 Ball 1LE22012BA113AA3 1099 GP1 14.4 90.2 228 15 1800 254T 208-230/460 GP10 Ball 1LE22012BB114AA3 1073 GP1 19.0 91.0 227 15 1800 254T 575 GP10 Ball 1LE22012BB113AA3 1073 GP1 15.2 91.0 227 15 1200 284T 230/460 GP10 Ball 1LE22012CC116AA3 1925 GP1 20.0 90.2 375 15 1200 284T 575 GP10 Ball 1LE22012CC113AA3 1925 GP1 16.0 90.2 375 15 900 286T 230/460 GP10 Ball 1LE22012CD216AA3 2746 GP1 23.0 91.0 430 15 900 286T 575 GP10 Ball 1LE22012CD213AA3 2746 GP1 18.4 91.0 430 20 3600 256T 208-230/460 GP10 Ball 1LE22012BA214AA3 1360 GP1 23.5 90.2 241 20 3600 256T 575 GP10 Ball 1LE22012BA213AA3 1360 GP1 18.8 90.2 241 20 1800 256T 208-230/460 GP10 Ball 1LE22012BB214AA3 1292 GP1 25.0 91.0 246 20 1800 256T 575 GP10 Ball 1LE22012BB213AA3 1292 GP1 20.0 91.0 246 20 1200 286T 230/460 GP10 Ball 1LE22012CC216AA3 2303 GP1 26.0 90.2 430 20 1200 286T 575 GP10 Ball 1LE22012CC213AA3 2303 GP1 20.8 90.2 430 20 900 324T 230/460 GP10 Ball 1LE22013AD116AA3 3297 GP1 31.0 91.0 567 20 900 324T 575 GP10 Ball 1LE22013AD113AA3 3297 GP1 24.8 91.0 567 25 3600 284TS 230/460 GP10 Ball 1LE22012DA116AA3 1751 GP1 29.0 91.0 375 25 3600 284TS 575 GP10 Ball 1LE22012DA113AA3 1751 GP1 23.2 91.0 375 25 1800 284T 230/460 GP10 Ball 1LE22012CB116AA3 1671 GP1 29.0 92.4 390 25 1800 284T 575 GP10 Ball 1LE22012CB113AA3 1671 GP1 23.2 92.4 375 25 1200 324T 230/460 GP10 Ball 1LE22013AC116AA3 2760 GP1 33.0 91.7 565 25 1200 324T 575 GP10 Ball 1LE22013AC113AA3 2760 GP1 26.4 91.7 565 25 900 326T 230/460 GP10 Ball 1LE22013AD216AA3 3789 GP1 38.0 90.2 600 25 900 326T 575 GP10 Ball 1LE22013AD213AA3 3789 GP1 30.4 90.2 600 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZP stock motors are depleted DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 2-9 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose - TEFC GP10 - (Cast Iron Frame) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing 2-10 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 30 3600 286TS 230/460 GP10 Ball 1LE22012DA216AA3 2071 GP1 34.0 91.0 430 30 3600 286TS 575 GP10 Ball 1LE22012DA213AA3 2071 GP1 27.2 91.0 430 30 1800 286T 230/460 GP10 Ball 1LE22012CB216AA3 1970 GP1 35.0 92.4 408 30 1800 286T 575 GP10 Ball 1LE22012CB213AA3 1970 GP1 28.0 92.4 407 30 1200 326T 230/460 GP10 Ball 1LE22013AC216AA3 3450 GP1 39.0 91.7 600 30 1200 326T 575 GP10 Ball 1LE22013AC213AA3 3450 GP1 31.2 91.7 600 30 900 364T 230/460 GP10 Ball 1LE22013CD116AA3 4866 GP1 47.0 91.0 800 30 900 364T 575 GP10 Ball 1LE22013CD113AA3 4866 GP1 37.6 91.0 800 40 3600 324TS 230/460 GP10 Ball 1LE22013BA116AA3 2684 GP1 46.0 91.7 537 40 3600 324TS 575 GP10 Ball 1LE22013BA113AA3 2684 GP1 36.8 91.7 537 40 1800 324T 230/460 GP10 Ball 1LE22013AB116AA3 2593 GP1 47.0 93.0 542 40 1800 324T 575 GP10 Ball 1LE22013AB113AA3 2593 GP1 37.6 93.0 542 40 1200 364T 230/460 GP10 Ball 1LE22013CC116AA3 4568 GP1 52.0 93.0 800 40 1200 364T 575 GP10 Ball 1LE22013CC113AA3 4568 GP1 41.6 93.0 800 40 900 365T 230/460 GP10 Ball 1LE22013CD216AA3 5749 GP1 63.0 91.7 875 40 900 365T 575 GP10 Ball 1LE22013CD213AA3 5749 GP1 50.4 91.7 875 50 3600 326TS 230/460 GP10 Ball 1LE22013BA216AA3 3405 GP1 55.0 92.4 580 50 3600 326TS 575 GP10 Ball 1LE22013BA213AA3 3405 GP1 44.0 92.4 580 50 1800 326T 230/460 GP10 Ball 1LE22013AB216AA3 3182 GP1 58.0 93.0 600 50 1800 326T 575 GP10 Ball 1LE22013AB213AA3 3182 GP1 46.4 93.0 600 50 1200 365T 230/460 GP10 Ball 1LE22013CC216AA3 5317 GP1 66.0 93.0 875 50 1200 365T 575 GP10 Ball 1LE22013CC213AA3 5317 GP1 52.8 93.0 875 60 3600 364TS 230/460 GP10 Ball 1LE22013DA116AA3 4759 GP1 68.0 93.0 709 60 3600 364TS 575 GP10 Ball 1LE22013DA113AA3 4704 GP1 54.4 93.0 709 60 1800 364T 230/460 GP10 Ball 1LE22013CB116AA3 4767 GP1 71.0 93.6 720 60 1800 364T 575 GP10 Ball 1LE22013CB113AA3 4767 GP1 56.8 93.6 800 60 1200 404T 230/460 GP10 Ball 1LE22014AC116AA3 6332 GP1 74.0 93.6 1135 60 1200 404T 575 GP10 Ball 1LE22014AC113AA3 6332 GP1 59.2 93.6 1135 75 3600 365TS 230/460 GP10 Ball 1LE22013DA216AA3 5924 GP1 85.0 93.0 875 75 3600 365TS 575 GP10 Ball 1LE22013DA213AA3 5924 GP1 68.0 93.0 875 75 1800 365T 230/460 GP10 Ball 1LE22013CB216AA3 6109 GP1 87.0 94.1 875 75 1800 365T 575 GP10 Ball 1LE22013CB213AA3 6109 GP1 69.6 94.1 875 75 1200 405T 230/460 GP10 Ball 1LE22014AC216AA3 7489 GP1 93.0 93.6 1300 75 1200 405T 575 GP10 Ball 1LE22014AC213AA3 7489 GP1 74.4 93.6 1300 100 3600 405TS 460 GP10 Ball 1LE22014BA212AA3 7917 GP1 112.0 93.6 1300 100 3600 405TS 575 GP10 Ball 1LE22014BA213AA3 7917 GP1 89.6 93.6 1300 100 1800 405T 460 GP10 Ball 1LE22014AB212AA3 7483 GP1 114.0 94.5 1300 100 1800 405TS 460 GP10 Ball 1LE22014BB212AA3 7483 GP1 114.0 94.5 1300 100 1800 405T 575 GP10 Ball 1LE22014AB213AA3 7483 GP1 91.2 94.5 1300 100 1200 444T 460 GP10 Roller 1LE22014CC112AA3 10293 GP1 117.0 94.1 1625 100 1200 444TS 460 GP10 Ball 1LE22014DC112AA3 10293 GP1 117.0 94.1 1625 100 1200 444T 575 GP10 Roller 1LE22014CC113AA3 10293 GP1 93.6 94.1 1625 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZP stock motors are depleted Stock Model DOE#CC032A

General Purpose - TEFC GP10 - (Cast Iron Frame) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 125 3600 444TS 460 GP10 Ball 1LE22014DA112AA3 10829 GP1 138.0 94.5 1552 125 3600 444TS 575 GP10 Ball 1LE22014DA113AA3 10829 GP1 110.4 94.5 1552 125 1800 444T 460 GP10 Roller 1LE22014CB112AA3 10081 GP1 145.0 94.5 1625 125 1800 B444T 460 GP10 Ball 1LE22014EB112AA3 10081 GP1 145.0 94.5 1625 125 1800 444TS 460 GP10 Ball 1LE22014DB112AA3 10081 GP1 145.0 94.5 1625 125 1800 444T 575 GP10 Roller 1LE22014CB113AA3 10081 GP1 117.0 94.5 1625 125 1800 B444T 575 GP10 Ball 1LE22014EB113AA3 10081 GP1 117.0 94.5 1600 125 1800 444TS 575 GP10 Ball 1LE22014DB113AA3 10081 GP1 117.0 94.5 1600 125 1200 445T 460 GP10 Roller 1LE22014CC212AA3 12303 GP1 145.0 94.1 1900 125 1200 B445T 460 GP10 Ball 1LE22014EC212AA3 12303 GP1 145.0 94.1 1900 125 1200 445TS 460 GP10 Ball 1LE22014DC212AA3 12303 GP1 145.0 94.1 1900 125 1200 445T 575 GP10 Roller 1LE22014CC213AA3 12303 GP1 116.0 94.1 1900 125 1200 B445T 575 GP10 Ball 1LE22014EC213AA3 12303 GP1 116.0 94.1 1900 125 1200 445TS 575 GP10 Ball 1LE22014DC213AA3 12303 GP1 116.0 94.1 1900 150 3600 445TS 460 GP10 Ball 1LE22014DA212AA3 13359 GP1 165.0 94.5 1900 150 3600 445TS 575 GP10 Ball 1LE22014DA213AA3 13359 GP1 132.0 94.5 1900 150 1800 445T 460 GP10 Roller 1LE22014CB212AA3 11906 GP1 170.0 95.0 1900 150 1800 B445T 460 GP10 Ball 1LE22014EB212AA3 11906 GP1 170.0 95.0 1900 150 1800 445TS 460 GP10 Ball 1LE22014DB212AA3 11906 GP1 170.0 95.0 1900 150 1800 445T 575 GP10 Roller 1LE22014CB213AA3 11906 GP1 136.0 95.0 1900 150 1800 B445T 575 GP10 Ball 1LE22014EB213AA3 11906 GP1 136.0 95.0 1900 150 1800 445TS 575 GP10 Ball 1LE22014DB213AA3 11906 GP1 136.0 95.0 1900 150 1200 447T 460 GP10 Roller 1LE22014CC312AA3 14243 GP1 171.0 95.0 2174 150 1200 B447T 460 GP10 Ball 1LE22014EC312AA3 14243 GP1 171.0 95.0 2174 150 1200 447TS 460 GP10 Ball 1LE22014DC312AA3 14243 GP1 171.0 95.0 2174 150 1200 447T 575 GP10 Roller 1LE22014CC313AA3 14243 GP1 136.0 95.0 2174 150 1200 B447T 575 GP10 Ball 1LE22014EC313AA3 14243 GP1 136.0 95.0 2174 150 1200 447TS 575 GP10 Ball 1LE22014DC313AA3 14243 GP1 136.0 95.0 2174 200 3600 447TS 460 GP10 Ball 1LE22014DA312AA3 16964 GP1 212.0 95.0 2280 200 3600 447TS 575 GP10 Ball 1LE22014DA313AA3 16974 GP1 169.6 95.0 2280 200 1800 447T 460 GP10 Roller 1LE22014CB312AA3 14660 GP1 225.0 95.0 2280 200 1800 B447T 460 GP10 Ball 1LE22014EB312AA3 14660 GP1 225.0 95.0 2280 200 1800 447TS 460 GP10 Ball 1LE22014DB312AA3 14660 GP1 225.0 95.0 2280 200 1800 447T 575 GP10 Roller 1LE22014CB313AA3 14660 GP1 180.0 95.0 2280 200 1800 B447T 575 GP10 Ball 1LE22014EB313AA3 14660 GP1 180.0 95.0 2280 200 1800 447TS 575 GP10 Ball 1LE22014DB313AA3 14660 GP1 180.0 95.0 2280 200 1200 449T 460 GP10 Roller 1LE22014CC512AA3 17804 GP1 224.0 95.0 2363 200 1200 B449T 460 GP10 Ball 1LE22014EC512AA3 17804 GP1 224.0 95.0 2363 200 1200 449TS 460 GP10 Ball 1LE22014DC512AA3 17804 GP1 224.0 95.0 2363 200 1200 449T 575 GP10 Roller 1LE22014CC513AA3 17804 GP1 179.2 95.0 2363 200 1200 B449T 575 GP10 Ball 1LE22014EC513AA3 17804 GP1 179.2 95.0 2363 200 1200 449TS 575 GP10 Ball 1LE22014DC513AA3 17804 GP1 179.2 95.0 2363 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZP stock motors are depleted DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 2-11 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose - TEFC GP10 - (Cast Iron Frame) HP RPM Frame Voltage Type C-Face, Horizontal, Foot Mounted DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 3600 143TC 208-230/460 GP10 Ball 1LE22011AA114EA3 371 GP1 1.4 80.0 51 1 3600 143TC 575 GP10 Ball 1LE22011AA113EA3 371 GP1 1.1 80.0 51 1 1800 143TC 208-230/460 GP10 Ball 1LE22011AB214EA3 371 GP1 1.5 82.5 53 1 1800 143TC 575 GP10 Ball 1LE22011AB213EA3 371 GP1 1.2 82.5 53 1 1200 145TC 208-230/460 GP10 Ball 1LE22011AC314EA3 448 GP1 1.6 80.0 54 1 1200 145TC 575 GP10 Ball 1LE22011AC313EA3 448 GP1 1.3 80.0 54 1 900 182TC 208-230/460 GP10 Ball 1LE22011CD114EA3 694 GP1 2.1 74.0 86 1 900 182TC 575 GP10 Ball 1LE22011CD113EA3 694 GP1 1.6 74.0 86 1.5 3600 143TC 208-230/460 GP10 Ball 1LE22011AA214EA3 379 GP1 2.0 82.5 53 1.5 3600 143TC 575 GP10 Ball 1LE22011AA213EA3 379 GP1 1.6 82.5 53 1.5 1800 145TC 208-230/460 GP10 Ball 1LE22011AB314EA3 403 GP1 2.2 84.0 58 1.5 1800 145TC 575 GP10 Ball 1LE22011AB313EA3 403 GP1 1.8 84.0 58 1.5 1200 182TC 208-230/460 GP10 Ball 1LE22011CC114EA3 499 GP1 2.4 85.5 83 1.5 1200 182TC 575 GP10 Ball 1LE22011CC113EA3 499 GP1 1.9 85.5 83 1.5 900 184TC 208-230/460 GP10 Ball 1LE22011CD314EA3 746 GP1 3.0 77.0 99 1.5 900 184TC 575 GP10 Ball 1LE22011CD313EA3 746 GP1 2.4 77.0 99 2 3600 145TC 208-230/460 GP10 Ball 1LE22011AA314EA3 432 GP1 2.6 84.0 54 2 3600 145TC 575 GP10 Ball 1LE22011AA313EA3 432 GP1 2.1 84.0 54 2 1800 145TC 208-230/460 GP10 Ball 1LE22011AB414EA3 433 GP1 3.0 84.0 59 2 1800 145TC 575 GP10 Ball 1LE22011AB413EA3 433 GP1 2.4 84.0 59 2 1200 184TC 208-230/460 GP10 Ball 1LE22011CC314EA3 543 GP1 3.1 86.5 94 2 1200 184TC 575 GP10 Ball 1LE22011CC313EA3 543 GP1 2.5 86.5 94 2 900 213TC 208-230/460 GP10 Ball 1LE22012AD114EA3 846 GP1 3.3 82.5 123 2 900 213TC 575 GP10 Ball 1LE22012AD113EA3 846 GP1 2.6 82.5 123 3 3600 182TC 208-230/460 GP10 Ball 1LE22011CA114EA3 499 GP1 3.7 85.5 85 3 3600 182TC 575 GP10 Ball 1LE22011CA113EA3 499 GP1 3.0 85.5 85 3 1800 182TC 208-230/460 GP10 Ball 1LE22011CB114EA3 513 GP1 4.0 87.5 88 3 1800 182TC 575 GP10 Ball 1LE22011CB113EA3 513 GP1 3.2 87.5 88 3 1200 213TC 208-230/460 GP10 Ball 1LE22012AC114EA3 675 GP1 4.2 87.5 143 3 1200 213TC 575 GP10 Ball 1LE22012AC113EA3 675 GP1 3.4 87.5 143 3 900 215TC 208-230/460 GP10 Ball 1LE22012AD214EA3 1178 GP1 4.8 84.0 138 3 900 215TC 575 GP10 Ball 1LE22012AD213EA3 1178 GP1 3.8 84.0 138 5 3600 184TC 208-230/460 GP10 Ball 1LE22011CA314EA3 626 GP1 6.2 87.5 91 5 3600 184TC 575 GP10 Ball 1LE22011CA313EA3 626 GP1 5.0 87.5 91 5 1800 184TC 208-230/460 GP10 Ball 1LE22011CB314EA3 574 GP1 6.7 87.5 94 5 1800 184TC 575 GP10 Ball 1LE22011CB313EA3 574 GP1 5.4 87.5 94 5 1200 215TC 208-230/460 GP10 Ball 1LE22012AC214EA3 967 GP1 6.8 87.5 151 5 1200 215TC 575 GP10 Ball 1LE22012AC213EA3 967 GP1 5.4 87.5 151 5 900 254TC 208-230/460 GP10 Ball 1LE22012BD114EA3 1629 GP1 8.8 85.5 218 5 900 254TC 575 GP10 Ball 1LE22012BD113EA3 1629 GP1 7.0 85.5 218 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZP stock motors are depleted Stock Model 2-12 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

General Purpose - TEFC GP10 - (Cast Iron Frame) HP RPM Frame Voltage Type C-Face, Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 7.5 3600 213TC 208-230/460 GP10 Ball 1LE22012AA114EA3 793 GP1 9.0 88.5 137 7.5 3600 213TC 575 GP10 Ball 1LE22012AA113EA3 793 GP1 7.2 88.5 137 7.5 1800 213TC 208-230/460 GP10 Ball 1LE22012AB114EA3 771 GP1 9.5 89.5 143 7.5 1800 213TC 575 GP10 Ball 1LE22012AB113EA3 771 GP1 7.6 89.5 143 7.5 1200 254TC 208-230/460 GP10 Ball 1LE22012BC114EA3 1233 GP1 10.5 89.5 224 7.5 1200 254TC 575 GP10 Ball 1LE22012BC113EA3 1233 GP1 8.4 89.5 224 7.5 900 256TC 208-230/460 GP10 Ball 1LE22012BD214EA3 1696 GP1 13.0 85.5 250 7.5 900 256TC 575 GP10 Ball 1LE22012BD213EA3 1696 GP1 10.4 85.5 250 10 3600 215TC 208-230/460 GP10 Ball 1LE22012AA214EA3 921 GP1 11.5 89.5 150 10 3600 215TC 575 GP10 Ball 1LE22012AA213EA3 921 GP1 9.2 89.5 150 10 1800 215TC 208-230/460 GP10 Ball 1LE22012AB214EA3 921 GP1 12.5 89.5 151 10 1800 215TC 575 GP10 Ball 1LE22012AB213EA3 921 GP1 10.0 89.5 151 10 1200 256TC 208-230/460 GP10 Ball 1LE22012BC214EA3 1433 GP1 13.5 89.5 236 10 1200 256TC 575 GP10 Ball 1LE22012BC213EA3 1433 GP1 10.8 89.5 236 15 3600 254TC 208-230/460 GP10 Ball 1LE22012BA114EA3 1198 GP1 18.0 90.2 228 15 3600 254TC 575 GP10 Ball 1LE22012BA113EA3 1198 GP1 14.4 90.2 228 15 1800 254TC 208-230/460 GP10 Ball 1LE22012BB114EA3 1172 GP1 19.0 91.0 227 15 1800 254TC 575 GP10 Ball 1LE22012BB113EA3 1172 GP1 15.2 91.0 227 20 3600 256TC 208-230/460 GP10 Ball 1LE22012BA214EA3 1459 GP1 23.5 90.2 241 20 3600 256TC 575 GP10 Ball 1LE22012BA213EA3 1459 GP1 18.8 90.2 241 20 1800 256TC 208-230/460 GP10 Ball 1LE22012BB214EA3 1391 GP1 25.0 91.0 246 20 1800 256TC 575 GP10 Ball 1LE22012BB213EA3 1391 GP1 20.0 91.0 246 C-Face, Horizontal, Footless 1 3600 143TC 208-230/460 GP10 Ball 1LE22011AA114GA3 386 GP1 1.4 80.0 51 1 3600 143TC 575 GP10 Ball 1LE22011AA113GA3 386 GP1 1.1 80.0 51 1 1800 143TC 208-230/460 GP10 Ball 1LE22011AB214GA3 386 GP1 1.5 82.5 53 1 1800 143TC 575 GP10 Ball 1LE22011AB213GA3 386 GP1 1.2 82.5 53 1 1200 145TC 208-230/460 GP10 Ball 1LE22011AC314GA3 463 GP1 1.6 80.0 54 1 1200 145TC 575 GP10 Ball 1LE22011AC313GA3 463 GP1 1.3 80.0 54 1 900 182TC 208-230/460 GP10 Ball 1LE22011CD114GA3 718 GP1 2.1 74.0 86 1 900 182TC 575 GP10 Ball 1LE22011CD113GA3 718 GP1 1.6 74.0 86 1.5 3600 143TC 208-230/460 GP10 Ball 1LE22011AA214GA3 393 GP1 2.0 82.5 53 1.5 3600 143TC 575 GP10 Ball 1LE22011AA213GA3 393 GP1 1.6 82.5 53 1.5 1800 145TC 208-230/460 GP10 Ball 1LE22011AB314GA3 418 GP1 2.2 84.0 58 1.5 1800 145TC 575 GP10 Ball 1LE22011AB313GA3 418 GP1 1.8 84.0 58 1.5 1200 182TC 208-230/460 GP10 Ball 1LE22011CC114GA3 523 GP1 2.4 85.5 83 1.5 1200 182TC 575 GP10 Ball 1LE22011CC113GA3 523 GP1 1.9 85.5 83 1.5 900 184TC 208-230/460 GP10 Ball 1LE22011CD314GA3 770 GP1 3.0 77.0 99 1.5 900 184TC 575 GP10 Ball 1LE22011CD313GA3 770 GP1 2.4 77.0 99 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZP stock motors are depleted DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 2-13 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose - TEFC GP10 - (Cast Iron Frame) HP RPM Frame Voltage Type C-Face, Horizontal, Footless - continued DE Bearing 2-14 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 2 3600 145TC 208-230/460 GP10 Ball 1LE22011AA314GA3 446 GP1 2.6 84.0 54 2 3600 145TC 575 GP10 Ball 1LE22011AA313GA3 446 GP1 2.1 84.0 54 2 1800 145TC 208-230/460 GP10 Ball 1LE22011AB414GA3 447 GP1 3.0 84.0 59 2 1800 145TC 575 GP10 Ball 1LE22011AB413GA3 447 GP1 2.4 84.0 59 2 1200 184TC 208-230/460 GP10 Ball 1LE22011CC314GA3 567 GP1 3.1 86.5 94 2 1200 184TC 575 GP10 Ball 1LE22011CC313GA3 567 GP1 2.5 86.5 94 2 900 213TC 208-230/460 GP10 Ball 1LE22012AD114GA3 870 GP1 3.3 82.5 123 2 900 213TC 575 GP10 Ball 1LE22012AD113GA3 870 GP1 2.6 82.5 123 3 3600 182TC 208-230/460 GP10 Ball 1LE22011CA114GA3 523 GP1 3.7 85.5 85 3 3600 182TC 575 GP10 Ball 1LE22011CA113GA3 523 GP1 3.0 85.5 85 3 1800 182TC 208-230/460 GP10 Ball 1LE22011CB114GA3 537 GP1 4.0 87.5 88 3 1800 182TC 575 GP10 Ball 1LE22011CB113GA3 537 GP1 3.2 87.5 88 3 1200 213TC 208-230/460 GP10 Ball 1LE22012AC114GA3 699 GP1 4.2 87.5 143 3 1200 213TC 575 GP10 Ball 1LE22012AC113GA3 699 GP1 3.4 87.5 143 3 900 215TC 208-230/460 GP10 Ball 1LE22012AD214GA3 1202 GP1 4.8 84.0 138 3 900 215TC 575 GP10 Ball 1LE22012AD213GA3 1202 GP1 3.8 84.0 138 5 3600 184TC 208-230/460 GP10 Ball 1LE22011CA314GA3 650 GP1 6.2 87.5 91 5 3600 184TC 575 GP10 Ball 1LE22011CA313GA3 650 GP1 5.0 87.5 91 5 1800 184TC 208-230/460 GP10 Ball 1LE22011CB314GA3 598 GP1 6.7 87.5 94 5 1800 184TC 575 GP10 Ball 1LE22011CB313GA3 598 GP1 5.4 87.5 94 5 1200 215TC 208-230/460 GP10 Ball 1LE22012AC214GA3 991 GP1 6.8 87.5 151 5 1200 215TC 575 GP10 Ball 1LE22012AC213GA3 991 GP1 5.4 87.5 151 5 900 254TC 208-230/460 GP10 Ball 1LE22012BD114GA3 1664 GP1 8.8 85.5 218 5 900 254TC 575 GP10 Ball 1LE22012BD113GA3 1664 GP1 7.0 85.5 218 7.5 3600 213TC 208-230/460 GP10 Ball 1LE22012AA114GA3 817 GP1 9.0 88.5 137 7.5 3600 213TC 575 GP10 Ball 1LE22012AA113GA3 817 GP1 7.2 88.5 137 7.5 1800 213TC 208-230/460 GP10 Ball 1LE22012AB114GA3 795 GP1 9.5 89.5 143 7.5 1800 213TC 575 GP10 Ball 1LE22012AB113GA3 795 GP1 7.6 89.5 143 7.5 1200 254TC 208-230/460 GP10 Ball 1LE22012BC114GA3 1268 GP1 10.5 89.5 224 7.5 1200 254TC 575 GP10 Ball 1LE22012BC113GA3 1268 GP1 8.4 89.5 224 7.5 900 256TC 208-230/460 GP10 Ball 1LE22012BD214GA3 1731 GP1 13.0 85.5 250 7.5 900 256TC 575 GP10 Ball 1LE22012BD213GA3 1731 GP1 10.4 85.5 250 10 3600 215TC 208-230/460 GP10 Ball 1LE22012AA214GA3 945 GP1 11.5 89.5 150 10 3600 215TC 575 GP10 Ball 1LE22012AA213GA3 945 GP1 9.2 89.5 150 10 1800 215TC 208-230/460 GP10 Ball 1LE22012AB214GA3 945 GP1 12.5 89.5 151 10 1800 215TC 575 GP10 Ball 1LE22012AB213GA3 945 GP1 10.0 89.5 151 10 1200 256TC 208-230/460 GP10 Ball 1LE22012BC214GA3 1468 GP1 13.5 89.5 236 10 1200 256TC 575 GP10 Ball 1LE22012BC213GA3 1468 GP1 10.8 89.5 236 15 3600 254TC 208-230/460 GP10 Ball 1LE22012BA114GA3 1233 GP1 18.0 90.2 228 15 3600 254TC 575 GP10 Ball 1LE22012BA113GA3 1233 GP1 14.4 90.2 228 15 1800 254TC 208-230/460 GP10 Ball 1LE22012BB114GA3 1207 GP1 19.0 91.0 227 15 1800 254TC 575 GP10 Ball 1LE22012BB113GA3 1207 GP1 15.2 91.0 227 20 3600 256TC 208-230/460 GP10 Ball 1LE22012BA214GA3 1494 GP1 23.5 90.2 241 20 3600 256TC 575 GP10 Ball 1LE22012BA213GA3 1494 GP1 18.8 90.2 241 20 1800 256TC 208-230/460 GP10 Ball 1LE22012BB214GA3 1426 GP1 25.0 91.0 246 20 1800 256TC 575 GP10 Ball 1LE22012BB213GA3 1426 GP1 20.0 91.0 246 Stock Model DOE#CC032A

General Purpose - TEFC RGZP (Cast Iron Frame) RGZP motors are ideal for both indoor and outdoor applications and in operating atmospheres that contain moisture, dust and grit. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other general purpose applications. Specifications 25 to 200 HP 1.15 service factor, 40ºC ambient 3600, 1800, 1200 or 900 RPM 3-phase, 60 Hz; 230/460 volt operation under 100 HP, 460 volt 100 HP and above, 575 volt available Meets or exceeds EPAct efficiency standards Class F insulation, Class B temperature rise NEMA design B, continuous duty 284T through 449T frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation T-drains provided. Lifting eyebolts are included. Rotor A unique rotor design provides improved efficiency. Large cross section bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses. Insulation Proprietary, inverterrated, Class F non-hygroscopic insulation system with NEMA Class B temperature rise @ 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. This insulation system meets or exceeds NEMA MG1-2006, Part 31, making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Polycarbonate fan covers are provided on 284T-365T frames and cast iron for frames 404T and larger. Bearings Oversized, regreasable, single shielded, with cast iron inner caps (444T 449T). Alemite grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance. For added bearing protection, motors are equipped with a drive end shaft V-ring slinger. High Efficiency Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. Oversized Conduit Box Larger than industry standards, diagonallysplit, gasketed and rotatable in 90 increments for quick and easy connections. Leads are non-wicking and are clearly and permanently marked. Steel construction for frames 284T to 405T and cast iron for 444T frames and larger. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion. Modifiable & Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 2-15 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose - TEFC RGZP (Cast Iron Frame) HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 15 1200 284T 230/460 RGZP Ball 1LE29312CC116AA3 1730 SA-7ST 20 90.2 375 15 1200 284T 575 RGZP Ball 1LE29312CC113AA3 1730 SA-7ST 16 90.2 375 20 1200 286T 230/460 RGZP Ball 1LE29312CC216AA3 2070 SA-7ST 26 90.2 430 20 1200 286T 575 RGZP Ball 1LE29312CC213AA3 2070 SA-7ST 21 90.2 430 25 3600 284TS 230/460 RGZP Ball 1LE29312DA116AA3 1574 SA-7ST 29 91 375 25 3600 284TS 575 RGZP Ball 1LE29312DA113AA3 1574 SA-7ST 23 91 375 25 1800 284T 230/460 RGZP Ball 1LE29312CB116AA3 1502 SA-7ST 29 92.4 390 25 1800 284T 575 RGZP Ball 1LE29312CB113AA3 1502 SA-7ST 23 92.4 375 25 1200 324T 230/460 RGZP Ball 1LE29313AC116AA3 2480 SA-7ST 33 91.7 565 25 1200 324T 575 RGZP Ball 1LE29313AC113AA3 2480 SA-7ST 26 91.7 565 30 3600 286TS 230/460 RGZP Ball 1LE29312DA216AA3 1861 SA-7ST 34 91 430 30 3600 286TS 575 RGZP Ball 1LE29312DA213AA3 1861 SA-7ST 27 91 430 30 1800 286T 230/460 RGZP Ball 1LE29312CB216AA3 1770 SA-7ST 35 92.4 408 30 1800 286T 575 RGZP Ball 1LE29312CB213AA3 1770 SA-7ST 28 92.4 407 30 1200 326T 230/460 RGZP Ball 1LE29313AC216AA3 3100 SA-7ST 39 91.7 600 30 1200 326T 575 RGZP Ball 1LE29313AC213AA3 3100 SA-7ST 31 91.7 600 40 3600 324TS 230/460 RGZP Ball 1LE29313BA116AA3 2412 SA-7ST 46 91.7 537 40 3600 324TS 575 RGZP Ball 1LE29313BA113AA3 2412 SA-7ST 37 91.7 537 40 1800 324T 230/460 RGZP Ball 1LE29313AB116AA3 2330 SA-7ST 47 93 542 40 1800 324T 575 RGZP Ball 1LE29313AB113AA3 2330 SA-7ST 38 93 542 40 1200 364T 230/460 RGZP Ball 1LE29313CC116AA3 4105 SA-7ST 52 93 800 40 1200 364T 575 RGZP Ball 1LE29313CC113AA3 4105 SA-7ST 42 93 800 50 3600 326TS 230/460 RGZP Ball 1LE29313BA216AA3 3060 SA-7ST 55 92.4 580 50 3600 326TS 575 RGZP Ball 1LE29313BA213AA3 3060 SA-7ST 44 92.4 580 50 1800 326T 230/460 RGZP Ball 1LE29313AB216AA3 2860 SA-7ST 58 93 600 50 1800 326T 575 RGZP Ball 1LE29313AB213AA3 2860 SA-7ST 46 93 600 50 1200 365T 230/460 RGZP Ball 1LE29313CC216AA3 4778 SA-7ST 66 93 875 50 1200 365T 575 RGZP Ball 1LE29313CC213AA3 4778 SA-7ST 53 93 875 60 3600 364TS 230/460 RGZP Ball 1LE29313DA116AA3 4277 SA-7ST 68 93 709 60 3600 364TS 575 RGZP Ball 1LE29313DA113AA3 4227 SA-7ST 54 93 709 60 1800 364T 230/460 RGZP Ball 1LE29313CB116AA3 4284 SA-7ST 71 93.6 720 60 1800 364T 575 RGZP Ball 1LE29313CB113AA3 4284 SA-7ST 57 93.6 800 60 1200 404T 230/460 RGZP Ball 1LE29314AC116AA3 5690 SA-7ST 74 93.6 1135 60 1200 404T 575 RGZP Ball 1LE29314AC113AA3 5690 SA-7ST 59 93.6 1135 75 3600 365TS 230/460 RGZP Ball 1LE29313DA216AA3 5324 SA-7ST 85 93 875 75 3600 365TS 575 RGZP Ball 1LE29313DA213AA3 5324 SA-7ST 68 93 875 High Efficiency 75 1800 365T 230/460 RGZP Ball 1LE29313CB216AA3 5490 SA-7ST 87 94.1 875 75 1800 365T 575 RGZP Ball 1LE29313CB213AA3 5490 SA-7ST 70 94.1 875 75 1200 405T 230/460 RGZP Ball 1LE29314AC216AA3 6730 SA-7ST 93 93.6 1300 75 1200 405T 575 RGZP Ball 1LE29314AC213AA3 6730 SA-7ST 74 93.6 1300 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZP motors will be discontinued when present stock is depleted Stock Model 2-16 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

General Purpose - TEFC RGZP (Cast Iron Frame) HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 100 3600 405TS 460 RGZP Ball 1LE29314BA212AA3 7115 SA-7ST 112 93.6 1300 100 3600 405TS 575 RGZP Ball 1LE29314BA213AA3 7115 SA-7ST 90 93.6 1300 100 1800 405T 460 RGZP Ball 1LE29314AB212AA3 6725 SA-7ST 114 94.5 1300 100 1800 405TS 460 RGZP Ball 1LE29314BB212AA3 6725 SA-7ST 114 94.5 1300 100 1800 405T 575 RGZP Ball 1LE29314AB213AA3 6725 SA-7ST 91 94.5 1300 100 1200 444T 460 RGZP Roller 1LE29314CC112AA3 9250 SA-7ST 117 94.1 1625 100 1200 444TS 460 RGZP Ball 1LE29314DC112AA3 9250 SA-7ST 117 94.1 1625 100 1200 444T 575 RGZP Roller 1LE29314CC113AA3 9250 SA-7ST 94 94.1 1625 125 3600 444TS 460 RGZP Ball 1LE29314DA112AA3 9732 SA-7ST 138 94.5 1552 125 3600 444TS 575 RGZP Ball 1LE29314DA113AA3 9732 SA-7ST 110 94.5 1552 125 1800 444T 460 RGZP Roller 1LE29314CB112AA3 9060 SA-7ST 145 94.5 1625 125 1800 B444T 460 RGZP Ball 1LE29314EB112AA3 9060 SA-7ST 145 94.5 1625 125 1800 444TS 460 RGZP Ball 1LE29314DB112AA3 9060 SA-7ST 145 94.5 1625 125 1800 444T 575 RGZP Roller 1LE29314CB113AA3 9060 SA-7ST 116 94.5 1625 125 1200 445T 460 RGZP Roller 1LE29314CC212AA3 11056 SA-7ST 145 94.1 1900 125 1200 445TS 460 RGZP Ball 1LE29314DC212AA3 11056 SA-7ST 145 94.1 1900 125 1200 445T 575 RGZP Roller 1LE29314CC213AA3 11056 SA-7ST 116 94.1 1900 150 3600 445TS 460 RGZP Ball 1LE29314DA212AA3 12005 SA-7ST 165 94.5 1900 150 3600 445TS 575 RGZP Ball 1LE29314DA213AA3 12005 SA-7ST 132 94.5 1900 150 1800 445T 460 RGZP Roller 1LE29314CB212AA3 10700 SA-7ST 170 95 1900 150 1800 B445T 460 RGZP Ball 1LE29314EB212AA3 10700 SA-7ST 170 95 1900 150 1800 445TS 460 RGZP Ball 1LE29314DB212AA3 10700 SA-7ST 170 95 1900 150 1800 445T 575 RGZP Roller 1LE29314CB213AA3 10700 SA-7ST 136 95 1900 150 1200 447T 460 RGZP Roller 1LE29314CC312AA3 12800 SA-7ST 171 95 2174 150 1200 447TS 460 RGZP Ball 1LE29314DC312AA3 12800 SA-7ST 171 95 2174 150 1200 447T 575 RGZP Roller 1LE29314CC313AA3 12800 SA-7ST 136 95 2174 200 3600 447TS 460 RGZP Ball 1LE29314DA312AA3 15245 SA-7ST 212 95 2280 200 3600 447TS 575 RGZP Ball 1LE29314DA313AA3 15254 SA-7ST 170 95 2280 200 1800 447T 460 RGZP Roller 1LE29314CB312AA3 13175 SA-7ST 225 95 2280 200 1800 447TS 460 RGZP Ball 1LE29314DB312AA3 13175 SA-7ST 225 95 2280 200 1800 447T 575 RGZP Roller 1LE29314CB313AA3 13175 SA-7ST 180 95 2280 200 1200 449T 460 RGZP Roller 1LE29314CC512AA3 16000 SA-7ST 224 95 2363 200 1200 449TS 460 RGZP Ball 1LE29314DC512AA3 16000 SA-7ST 224 95 2363 200 1200 449T 575 RGZP Roller 1LE29314CC513AA3 16000 SA-7ST 179 95 2363 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZP motors will be discontinued when present stock is depleted Stock Model Introduction General Purpose Duty Duty Purpose DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 2-17 Dimensions

Introduction General Purpose Duty Duty General Purpose - TEFC GP100A (Cast Aluminum Frame) GP100A general purpose TEFC motors are available in two configurations they exceed NEMA Premium efficiency with our exclusive, leading-edge, die cast copper rotor design or meet NEMA Premium efficiency with our die cast aluminum rotor design. Either way, these motors significantly reduce operating costs and pay for themselves in a short time through energy savings. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other industrial applications. Specifications 1 to 20 HP 1.15 service factor, 40 C ambient 3600, 1800 or 1200 RPM 3 phase, 60 Hz; 208-230/460 and 575 volt operation Meets or exceeds NEMA Premium efficiency standards Class F insulation, Class B temperature rise @ 1.0SF NEMA Design B, Continuous Duty Meets IP54 143T through 256T frame Features for Long Life Frame & Bearing Housings Die cast aluminum construction for exceptional heat dissipation and structural integrity. Maximum mounting flexibility assured with bolt-on feet. Condensation drain holes provided. Integrally cast lifting eyes. Unique frame fin design maximizes cooling. Rotor Each rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary inverter rated NEMA Class F non-hygroscopic insulation system with Class B temperature rise @ 1.0SF, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. This insulation system meets or exceeds NEMA MG1-2006, Part 31, making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Polycarbonate fan covers are provided on all frame sizes. Bearings Lubricated for life, oversized, complete with external bearing protection. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. Oversized Conduit Box Cast aluminum construction that is larger than industry standards, diagonally split and rotatable in 90º increments for quick and easy connections. Ground lug included. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Die cast aluminum construction, polycarbonate fan and fan cover, zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist corrosion. Modifiable Siemens GP100A motors are available with a variety of modifications and kits. Specifications table begins on the next page Dimensions Purpose 2-18 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose - TEFC GP100A (Cast Aluminum Frame - Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 3600 143T 208-230/460 GP100A Ball 1LE21211AA114AA3 327 GPA2 1.4 77 29 1 3600 143T 575 GP100A Ball 1LE21211AA113AA3 327 GPA2 1.12 77 29 1 1800 143T 208-230/460 GP100A Ball 1LE21211AB214AA3 327 GPA2 1.4 85.5 41 1 1800 143T 575 GP100A Ball 1LE21211AB213AA3 327 GPA2 1.12 85.5 41 1 1200 145T 208-230/460 GP100A Ball 1LE21211AC314AA3 406 GPA2 1.6 82.5 45 1 1200 145T 575 GP100A Ball 1LE21211AC313AA3 406 GPA2 1.28 82.5 45 1.5 3600 143T 208-230/460 GP100A Ball 1LE21211AA214AA3 335 GPA2 2 84 35 1.5 3600 143T 575 GP100A Ball 1LE21211AA213AA3 335 GPA2 1.6 84 35 1.5 1800 145T 208-230/460 GP100A Ball 1LE21211AB314AA3 359 GPA2 2 86.5 47 1.5 1800 145T 575 GP100A Ball 1LE21211AB313AA3 359 GPA2 1.6 86.5 47 1.5 1200 182T 208-230/460 GP100A Ball 1LE21211CC114AA3 434 GPA2 2.5 87.5 63 1.5 1200 182T 575 GP100A Ball 1LE21211CC113AA3 434 GPA2 2 87.5 63 2 3600 145T 208-230/460 GP100A Ball 1LE21211AA314AA3 390 GPA2 2.5 85.5 38 2 3600 145T 575 GP100A Ball 1LE21211AA313AA3 390 GPA2 2 85.5 38 2 1800 145T 208-230/460 GP100A Ball 1LE21211AB414AA3 391 GPA2 2.8 86.5 46 2 1800 145T 575 GP100A Ball 1LE21211AB413AA3 391 GPA2 2.24 86.5 46 2 1200 184T 208-230/460 GP100A Ball 1LE21211CC314AA3 479 GPA2 3.2 88.5 72 2 1200 184T 575 GP100A Ball 1LE21211CC313AA3 479 GPA2 2.56 88.5 72 3 3600 182T 208-230/460 GP100A Ball 1LE21211CA114AA3 434 GPA2 3.9 86.5 57 3 3600 182T 575 GP100A Ball 1LE21211CA113AA3 434 GPA2 3.12 86.5 57 3 1800 182T 208-230/460 GP100A Ball 1LE21211CB114AA3 449 GPA2 4 89.5 68 3 1800 182T 575 GP100A Ball 1LE21211CB113AA3 449 GPA2 3.2 89.5 68 3 1200 213T 208-230/460 GP100A Ball 1LE21212AC114AA3 616 GPA2 4.6 89.5 104 3 1200 213T 575 GP100A Ball 1LE21212AC113AA3 616 GPA2 3.68 89.5 104 5 3600 184T 208-230/460 GP100A Ball 1LE21211CA314AA3 565 GPA2 6 88.5 67 5 3600 184T 575 GP100A Ball 1LE21211CA313AA3 565 GPA2 4.8 88.5 67 5 1800 184T 208-230/460 GP100A Ball 1LE21211CB314AA3 511 GPA2 6.9 89.5 74 5 1800 184T 575 GP100A Ball 1LE21211CB313AA3 511 GPA2 5.52 89.5 74 5 1200 215T 208-230/460 GP100A Ball 1LE21212AC214AA3 919 GPA2 6.6 89.5 116 5 1200 215T 575 GP100A Ball 1LE21212AC213AA3 919 GPA2 5.28 89.5 116 7.5 3600 213T 208-230/460 GP100A Ball 1LE21212AA114AA3 738 GPA2 9 89.5 100 7.5 3600 213T 575 GP100A Ball 1LE21212AA113AA3 738 GPA2 7.2 89.5 100 7.5 1800 213T 208-230/460 GP100A Ball 1LE21212AB114AA3 715 GPA2 10 91.7 130 7.5 1800 213T 575 GP100A Ball 1LE21212AB113AA3 715 GPA2 8 91.7 130 7.5 1200 254T 208-230/460 GP100A Ball 1LE21212BC114AA3 1174 GPA2 10.5 91 200 7.5 1200 254T 575 GP100A Ball 1LE21212BC113AA3 1174 GPA2 8.4 91 200 10 3600 215T 208-230/460 GP100A Ball 1LE21212AA214AA3 870 GPA2 11.5 90.2 113 10 3600 215T 575 GP100A Ball 1LE21212AA213AA3 870 GPA2 9.2 90.2 113 10 1800 215T 208-230/460 GP100A Ball 1LE21212AB214AA3 870 GPA2 13 91.7 136 10 1800 215T 575 GP100A Ball 1LE21212AB213AA3 870 GPA2 10.4 91.7 136 10 1200 256T 208-230/460 GP100A Ball 1LE21212BC214AA3 1381 GPA2 13 91 196 10 1200 256T 575 GP100A Ball 1LE21212BC213AA3 1381 GPA2 10.4 91 196 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V DOE#CC032A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 2-19 Introduction General Purpose Duty Duty Purpose Dimensions

General Purpose - TEFC GP100A (Cast Aluminum Frame - Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 15 3600 254T 208-230/460 GP100A Ball 1LE21212BA114AA3 1138 GPA2 17.5 91 196 15 3600 254T 575 GP100A Ball 1LE21212BA113AA3 1138 GPA2 14 91 196 15 1800 254T 208-230/460 GP100A Ball 1LE21212BB114AA3 1111 GPA2 19.5 92.4 198 15 1800 254T 575 GP100A Ball 1LE21212BB113AA3 1111 GPA2 15.6 92.4 198 20 3600 256T 208-230/460 GP100A Ball 1LE21212BA214AA3 1408 GPA2 23 91 231 20 3600 256T 575 GP100A Ball 1LE21212BA213AA3 1408 GPA2 18.4 91 231 20 1800 256T 208-230/460 GP100A Ball 1LE21212BB214AA3 1337 GPA2 26 93 229 20 1800 256T 575 GP100A Ball 1LE21212BB213AA3 1337 GPA2 20.8 93 229 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency Stock Model Dimensions Introduction General Purpose Duty Duty Purpose 2-20 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

General Purpose - TEFC GP100A (Cast Aluminum Frame - Copper Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing NEMA Premium Efficiency Plus List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 1800 143T 208-230/460 GP100A Ball 1LE21111AB214AA3 362 GPA2 1.5 86.5 47 1 1800 143T 575 GP100A Ball 1LE21111AB213AA3 362 GPA2 1.2 86.5 47 1 1200 145T 208-230/460 GP100A Ball 1LE21111AC314AA3 452 GPA2 1.6 84 48 1 1200 145T 575 GP100A Ball 1LE21111AC313AA3 452 GPA2 1.28 84 48 1.5 3600 143T 208-230/460 GP100A Ball 1LE21111AA214AA3 372 GPA2 1.9 87.5 45 1.5 3600 143T 575 GP100A Ball 1LE21111AA213AA3 372 GPA2 1.52 87.5 45 1.5 1800 145T 208-230/460 GP100A Ball 1LE21111AB314AA3 399 GPA2 2.1 87.5 48 1.5 1800 145T 575 GP100A Ball 1LE21111AB313AA3 399 GPA2 1.68 87.5 48 2 3600 145T 208-230/460 GP100A Ball 1LE21111AA314AA3 433 GPA2 2.6 88.5 45 2 3600 145T 575 GP100A Ball 1LE21111AA313AA3 433 GPA2 2.08 88.5 45 2 1800 145T 208-230/460 GP100A Ball 1LE21111AB414AA3 434 GPA2 2.8 87.5 48 2 1800 145T 575 GP100A Ball 1LE21111AB413AA3 434 GPA2 2.24 87.5 48 3 3600 182T 208-230/460 GP100A Ball 1LE21111CA114AA3 482 GPA2 3.8 89.5 71 3 3600 182T 575 GP100A Ball 1LE21111CA113AA3 482 GPA2 3.04 89.5 71 3 1800 182T 208-230/460 GP100A Ball 1LE21111CB114AA3 499 GPA2 4 90.2 75 3 1800 182T 575 GP100A Ball 1LE21111CB113AA3 499 GPA2 3.2 90.2 75 3 1200 213T 208-230/460 GP100A Ball 1LE21112AC114AA3 685 GPA2 4.3 90.2 110 3 1200 213T 575 GP100A Ball 1LE21112AC113AA3 685 GPA2 3.44 90.2 110 5 3600 184T 208-230/460 GP100A Ball 1LE21111CA314AA3 628 GPA2 6.2 90.2 73 5 3600 184T 575 GP100A Ball 1LE21111CA313AA3 628 GPA2 4.96 90.2 73 5 1800 184T 208-230/460 GP100A Ball 1LE21111CB314AA3 568 GPA2 6.7 90.2 79 5 1800 184T 575 GP100A Ball 1LE21111CB313AA3 568 GPA2 5.36 90.2 79 5 1200 215T 208-230/460 GP100A Ball 1LE21112AC214AA3 1021 GPA2 6.8 90.2 123 5 1200 215T 575 GP100A Ball 1LE21112AC213AA3 1021 GPA2 5.44 90.2 123 7.5 3600 213T 208-230/460 GP100A Ball 1LE21112AA114AA3 820 GPA2 8.5 91.7 130 7.5 3600 213T 575 GP100A Ball 1LE21112AA113AA3 820 GPA2 6.8 91.7 130 7.5 1800 213T 208-230/460 GP100A Ball 1LE21112AB114AA3 795 GPA2 9.5 92.4 137 7.5 1800 213T 575 GP100A Ball 1LE21112AB113AA3 795 GPA2 7.6 92.4 137 7.5 1200 254T 208-230/460 GP100A Ball 1LE21112BC114AA3 1369 GPA2 10.5 92.4 244 7.5 1200 254T 575 GP100A Ball 1LE21112BC113AA3 1369 GPA2 8.4 92.4 244 10 3600 215T 208-230/460 GP100A Ball 1LE21112AA214AA3 967 GPA2 11.5 91.7 135 10 3600 215T 575 GP100A Ball 1LE21112AA213AA3 967 GPA2 9.2 91.7 135 10 1800 215T 208-230/460 GP100A Ball 1LE21112AB214AA3 967 GPA2 12.5 92.4 144 10 1800 215T 575 GP100A Ball 1LE21112AB213AA3 967 GPA2 10 92.4 144 10 1200 256T 208-230/460 GP100A Ball 1LE21112BC214AA3 1611 GPA2 13.5 92.4 245 10 1200 256T 575 GP100A Ball 1LE21112BC213AA3 1611 GPA2 10.8 92.4 245 15 3600 254T 208-230/460 GP100A Ball 1LE21112BA114AA3 1327 GPA2 17 92.4 218 15 3600 254T 575 GP100A Ball 1LE21112BA113AA3 1327 GPA2 13.6 92.4 218 15 1800 254T 208-230/460 GP100A Ball 1LE21112BB114AA3 1296 GPA2 19 93 207 15 1800 254T 575 GP100A Ball 1LE21112BB113AA3 1296 GPA2 15.2 93 207 20 3600 256T 208-230/460 GP100A Ball 1LE21112BA214AA3 1642 GPA2 23 92.4 241 20 3600 256T 575 GP100A Ball 1LE21112BA213AA3 1642 GPA2 18 92.4 241 20 1800 256T 208-230/460 GP100A Ball 1LE21112BB214AA3 1559 GPA2 25 93.6 248 20 1800 256T 575 GP100A Ball 1LE21112BB213AA3 1559 GPA2 20 93.6 248 DOE#CC032A Exceeds Energy Independence & Security Act Efficiency Levels 2010 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 2-21 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty General Purpose - TEFC GP100 (Cast Iron Frame) GP100 general purpose TEFC motors are available in two configurations they exceed NEMA Premium efficiency with our exclusive, leading-edge, die cast copper rotor design or meet NEMA Premium efficiency with our die cast aluminum rotor design. Either way, these motors significantly reduce operating costs and pay for themselves in a short time through energy savings. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other industrial applications. Specifications 1 to 20 HP 1.15 service factor, 40 C ambient 3600, 1800 or 1200 RPM 3 phase, 60 Hz; 208-230/460 and 575 volt operation Meets or exceeds NEMA Premium efficiency standards Class F insulation, Class B temperature rise @ 1.0SF NEMA Design B, Continuous Duty Meets IP55 143T through 256T frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity, equipped with integrally cast feet. Condensation drain holes provided. Lifting eyebolts are included for frames 180T to 256T. Unique frame fin design maximizes cooling. Rotor Each rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary inverterrated NEMA Class F non-hygroscopic insulation system with Class B temperature rise @ 1.0 SF, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. This insulation system meets or exceeds NEMA MG1-2006, Part 31, making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Polycarbonate fan covers are provided on all frame sizes. Bearings Lubricated for life, oversized, complete with external bearing protection. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. Oversized Conduit Box Cast aluminum construction that is larger than industry standards, diagonallysplit and rotatable in 90º increments for quick and easy connections. A ground lug is included. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, polycarbonate fan, zinc plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & Siemens motors are available with a wide variety of modifications & custom designs to meet your specific motor needs. Specifications table begins on the next page Dimensions Purpose 2-22 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose - TEFC GP100 (Cast Iron Frame - Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps FL Nom. Eff. (%) Weight (lbs) 1 3600 143T 208-230/460 GP100 Ball 1LE22211AA114AA3 355 GP2 1.4 77 60 1 3600 143T 575 GP100 Ball 1LE22211AA113AA3 355 GP2 1.12 77 60 1 1800 143T 208-230/460 GP100 Ball 1LE22211AB214AA3 355 GP2 1.4 85.5 62 1 1800 143T 575 GP100 Ball 1LE22211AB213AA3 355 GP2 1.12 85.5 62 1 1200 145T 208-230/460 GP100 Ball 1LE22211AC314AA3 441 GP2 1.6 82.5 64 1 1200 145T 575 GP100 Ball 1LE22211AC313AA3 441 GP2 1.28 82.5 64 1.5 3600 143T 208-230/460 GP100 Ball 1LE22211AA214AA3 364 GP2 2 84 56 1.5 3600 143T 575 GP100 Ball 1LE22211AA213AA3 364 GP2 1.6 84 56 1.5 1800 145T 208-230/460 GP100 Ball 1LE22211AB314AA3 391 GP2 2 86.5 66 1.5 1800 145T 575 GP100 Ball 1LE22211AB313AA3 391 GP2 1.6 86.5 66 1.5 1200 182T 208-230/460 GP100 Ball 1LE22211CC114AA3 471 GP2 2.5 87.5 93 1.5 1200 182T 575 GP100 Ball 1LE22211CC113AA3 471 GP2 2 87.5 93 2 3600 145T 208-230/460 GP100 Ball 1LE22211AA314AA3 423 GP2 2.5 85.5 59 2 3600 145T 575 GP100 Ball 1LE22211AA313AA3 423 GP2 2 85.5 59 2 1800 145T 208-230/460 GP100 Ball 1LE22211AB414AA3 424 GP2 2.8 86.5 66 2 1800 145T 575 GP100 Ball 1LE22211AB413AA3 424 GP2 2.24 86.5 66 2 1200 184T 208-230/460 GP100 Ball 1LE22211CC314AA3 521 GP2 3.2 88.5 102 2 1200 184T 575 GP100 Ball 1LE22211CC313AA3 521 GP2 2.56 88.5 102 3 3600 182T 208-230/460 GP100 Ball 1LE22211CA114AA3 471 GP2 3.9 86.5 87 3 3600 182T 575 GP100 Ball 1LE22211CA113AA3 471 GP2 3.12 86.5 87 3 1800 182T 208-230/460 GP100 Ball 1LE22211CB114AA3 487 GP2 4 89.5 98 3 1800 182T 575 GP100 Ball 1LE22211CB113AA3 487 GP2 3.2 89.5 98 3 1200 213T 208-230/460 GP100 Ball 1LE22212AC114AA3 670 GP2 4.6 89.5 144 3 1200 213T 575 GP100 Ball 1LE22212AC113AA3 670 GP2 3.68 89.5 144 5 3600 184T 208-230/460 GP100 Ball 1LE22211CA314AA3 614 GP2 6 88.5 98 5 3600 184T 575 GP100 Ball 1LE22211CA313AA3 614 GP2 4.8 88.5 98 5 1800 184T 208-230/460 GP100 Ball 1LE22211CB314AA3 555 GP2 6.9 89.5 104 5 1800 184T 575 GP100 Ball 1LE22211CB313AA3 555 GP2 5.52 89.5 104 5 1200 215T 208-230/460 GP100 Ball 1LE22212AC214AA3 999 GP2 6.6 89.5 156 5 1200 215T 575 GP100 Ball 1LE22212AC213AA3 999 GP2 5.28 89.5 156 7.5 3600 213T 208-230/460 GP100 Ball 1LE22212AA114AA3 802 GP2 9 89.5 148 7.5 3600 213T 575 GP100 Ball 1LE22212AA113AA3 802 GP2 7.2 89.5 148 7.5 1800 213T 208-230/460 GP100 Ball 1LE22212AB114AA3 778 GP2 10 91.7 171 7.5 1800 213T 575 GP100 Ball 1LE22212AB113AA3 778 GP2 8 91.7 171 7.5 1200 254T 208-230/460 GP100 Ball 1LE22212BC114AA3 1276 GP2 10.5 91 262 7.5 1200 254T 575 GP100 Ball 1LE22212BC113AA3 1276 GP2 8.4 91 262 10 3600 215T 208-230/460 GP100 Ball 1LE22212AA214AA3 946 GP2 11.5 90.2 163 10 3600 215T 575 GP100 Ball 1LE22212AA213AA3 946 GP2 9.2 90.2 163 10 1800 215T 208-230/460 GP100 Ball 1LE22212AB214AA3 946 GP2 13 91.7 177 10 1800 215T 575 GP100 Ball 1LE22212AB213AA3 946 GP2 10.4 91.7 177 10 1200 256T 208-230/460 GP100 Ball 1LE22212BC214AA3 1500 GP2 13 91 259 10 1200 256T 575 GP100 Ball 1LE22212BC213AA3 1500 GP2 10.4 91 259 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V DOE#CC032A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 2-23 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose - TEFC GP100 (Cast Iron Frame - Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 15 3600 254T 208-230/460 GP100 Ball 1LE22212BA114AA3 1237 GP2 17.5 91 258 15 3600 254T 575 GP100 Ball 1LE22212BA113AA3 1237 GP2 14 91 258 15 1800 254T 208-230/460 GP100 Ball 1LE22212BB114AA3 1207 GP2 19.5 92.4 259 15 1800 254T 575 GP100 Ball 1LE22212BB113AA3 1207 GP2 15.6 92.4 259 20 3600 256T 208-230/460 GP100 Ball 1LE22212BA214AA3 1530 GP2 23 91 293 20 3600 256T 575 GP100 Ball 1LE22212BA213AA3 1530 GP2 18.4 91 293 20 1800 256T 208-230/460 GP100 Ball 1LE22212BB214AA3 1453 GP2 26 93 292 20 1800 256T 575 GP100 Ball 1LE22212BB213AA3 1453 GP2 20.8 93 292 C-Face, Horizontal, Footless Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency 1 3600 143TC 208-230/460 GP100 Ball 1LE22211AA114GA3 421 GP2 1.4 77 60 1 3600 143TC 575 GP100 Ball 1LE22211AA113GA3 421 GP2 1.12 77 60 1 1800 143TC 208-230/460 GP100 Ball 1LE22211AB214GA3 421 GP2 1.4 85.5 62 1 1800 143TC 575 GP100 Ball 1LE22211AB213GA3 421 GP2 1.12 85.5 62 1 1200 145TC 208-230/460 GP100 Ball 1LE22211AC314GA3 508 GP2 1.6 82.5 64 1 1200 145TC 575 GP100 Ball 1LE22211AC313GA3 508 GP2 1.28 82.5 64 1.5 3600 143TC 208-230/460 GP100 Ball 1LE22211AA214GA3 431 GP2 2 84 56 1.5 3600 143TC 575 GP100 Ball 1LE22211AA213GA3 431 GP2 1.6 84 56 1.5 1800 145TC 208-230/460 GP100 Ball 1LE22211AB314GA3 458 GP2 2 86.5 66 1.5 1800 145TC 575 GP100 Ball 1LE22211AB313GA3 458 GP2 1.6 86.5 66 1.5 1200 182TC 208-230/460 GP100 Ball 1LE22211CC114GA3 570 GP2 2.5 87.5 93 1.5 1200 182TC 575 GP100 Ball 1LE22211CC113GA3 570 GP2 2 87.5 93 2 3600 145TC 208-230/460 GP100 Ball 1LE22211AA314GA3 489 GP2 2.5 85.5 59 2 3600 145TC 575 GP100 Ball 1LE22211AA313GA3 489 GP2 2 85.5 59 2 1800 145TC 208-230/460 GP100 Ball 1LE22211AB414GA3 490 GP2 2.8 86.5 66 2 1800 145TC 575 GP100 Ball 1LE22211AB413GA3 490 GP2 2.24 86.5 66 2 1200 184TC 208-230/460 GP100 Ball 1LE22211CC314GA3 620 GP2 3.2 88.5 102 2 1200 184TC 575 GP100 Ball 1LE22211CC313GA3 620 GP2 2.56 88.5 102 3 3600 182TC 208-230/460 GP100 Ball 1LE22211CA114GA3 570 GP2 3.9 86.5 87 3 3600 182TC 575 GP100 Ball 1LE22211CA113GA3 570 GP2 3.12 86.5 87 3 1800 182TC 208-230/460 GP100 Ball 1LE22211CB114GA3 586 GP2 4 89.5 98 3 1800 182TC 575 GP100 Ball 1LE22211CB113GA3 586 GP2 3.2 89.5 98 3 1200 213TC 208-230/460 GP100 Ball 1LE22212AC114GA3 769 GP2 4.6 89.5 144 3 1200 213TC 575 GP100 Ball 1LE22212AC113GA3 769 GP2 3.68 89.5 144 5 3600 184TC 208-230/460 GP100 Ball 1LE22211CA314GA3 713 GP2 6 88.5 98 5 3600 184TC 575 GP100 Ball 1LE22211CA313GA3 713 GP2 4.8 88.5 98 5 1800 184TC 208-230/460 GP100 Ball 1LE22211CB314GA3 654 GP2 6.9 89.5 104 5 1800 184TC 575 GP100 Ball 1LE22211CB313GA3 654 GP2 5.52 89.5 104 5 1200 215TC 208-230/460 GP100 Ball 1LE22212AC214GA3 1097 GP2 6.6 89.5 156 5 1200 215TC 575 GP100 Ball 1LE22212AC213GA3 1097 GP2 5.28 89.5 156 7.5 3600 213TC 208-230/460 GP100 Ball 1LE22212AA114GA3 901 GP2 9 89.5 148 7.5 3600 213TC 575 GP100 Ball 1LE22212AA113GA3 901 GP2 7.2 89.5 148 7.5 1800 213TC 208-230/460 GP100 Ball 1LE22212AB114GA3 876 GP2 10 91.7 171 7.5 1800 213TC 575 GP100 Ball 1LE22212AB113GA3 876 GP2 8 91.7 171 7.5 1200 254TC 208-230/460 GP100 Ball 1LE22212BC114GA3 1402 GP2 10.5 91 262 7.5 1200 254TC 575 GP100 Ball 1LE22212BC113GA3 1402 GP2 8.4 91 262 Stock Model 2-24 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

General Purpose - TEFC GP100 (Cast Iron Frame - Aluminum Rotor) HP RPM Frame Voltage Type C-Face, Horizontal, Footless - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 10 3600 215TC 208-230/460 GP100 Ball 1LE22212AA214GA3 1045 GP2 11.5 90.2 163 10 3600 215TC 575 GP100 Ball 1LE22212AA213GA3 1045 GP2 9.2 90.2 163 10 1800 215TC 208-230/460 GP100 Ball 1LE22212AB214GA3 1045 GP2 13 91.7 177 10 1800 215TC 575 GP100 Ball 1LE22212AB213GA3 1045 GP2 10.4 91.7 177 10 1200 256TC 208-230/460 GP100 Ball 1LE22212BC214GA3 1627 GP2 13 91 259 10 1200 256TC 575 GP100 Ball 1LE22212BC213GA3 1627 GP2 10.4 91 259 15 3600 254TC 208-230/460 GP100 Ball 1LE22212BA114GA3 1364 GP2 17.5 91 258 15 3600 254TC 575 GP100 Ball 1LE22212BA113GA3 1364 GP2 14 91 258 15 1800 254TC 208-230/460 GP100 Ball 1LE22212BB114GA3 1334 GP2 19.5 92.4 259 15 1800 254TC 575 GP100 Ball 1LE22212BB113GA3 1334 GP2 15.6 92.4 259 20 3600 256TC 208-230/460 GP100 Ball 1LE22212BA214GA3 1656 GP2 23 91 293 20 3600 256TC 575 GP100 Ball 1LE22212BA213GA3 1656 GP2 18.4 91 293 20 1800 256TC 208-230/460 GP100 Ball 1LE22212BB214GA3 1580 GP2 26 93 292 20 1800 256TC 575 GP100 Ball 1LE22212BB213GA3 1580 GP2 20.8 93 292 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model Introduction General Purpose Duty Duty Purpose DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 2-25 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose - TEFC GP100 (Cast Iron Frame - Copper Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing NEMA Premium Efficiency Plus List Price $ 2-26 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A Mult. Sym. Exceeds Energy Independence & Security Act Efficiency Levels 2010 FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 1800 143T 208-230/460 GP100 Ball 1LE22111AB214AA3 394 GP2 1.5 86.5 67 1 1800 143T 575 GP100 Ball 1LE22111AB213AA3 394 GP2 1.2 86.5 67 1 1200 145T 208-230/460 GP100 Ball 1LE22111AC314AA3 490 GP2 1.6 84 67 1 1200 145T 575 GP100 Ball 1LE22111AC313AA3 490 GP2 1.28 84 67 1.5 3600 143T 208-230/460 GP100 Ball 1LE22111AA214AA3 404 GP2 1.9 87.5 65 1.5 3600 143T 575 GP100 Ball 1LE22111AA213AA3 404 GP2 1.52 87.5 65 1.5 1800 145T 208-230/460 GP100 Ball 1LE22111AB314AA3 434 GP2 2.1 87.5 67 1.5 1800 145T 575 GP100 Ball 1LE22111AB313AA3 434 GP2 1.68 87.5 67 2 3600 145T 208-230/460 GP100 Ball 1LE22111AA314AA3 470 GP2 2.6 88.5 66 2 3600 145T 575 GP100 Ball 1LE22111AA313AA3 470 GP2 2.08 88.5 66 2 1800 145T 208-230/460 GP100 Ball 1LE22111AB414AA3 471 GP2 2.8 87.5 68 2 1800 145T 575 GP100 Ball 1LE22111AB413AA3 471 GP2 2.24 87.5 68 3 3600 182T 208-230/460 GP100 Ball 1LE22111CA114AA3 524 GP2 3.8 89.5 101 3 3600 182T 575 GP100 Ball 1LE22111CA113AA3 524 GP2 3.04 89.5 101 3 1800 182T 208-230/460 GP100 Ball 1LE22111CB114AA3 542 GP2 4 90.2 105 3 1800 182T 575 GP100 Ball 1LE22111CB113AA3 542 GP2 3.2 90.2 105 3 1200 213T 208-230/460 GP100 Ball 1LE22112AC114AA3 744 GP2 4.3 90.2 150 3 1200 213T 575 GP100 Ball 1LE22112AC113AA3 744 GP2 3.44 90.2 150 5 3600 184T 208-230/460 GP100 Ball 1LE22111CA314AA3 683 GP2 6.2 90.2 103 5 3600 184T 575 GP100 Ball 1LE22111CA313AA3 683 GP2 4.96 90.2 103 5 1800 184T 208-230/460 GP100 Ball 1LE22111CB314AA3 617 GP2 6.7 90.2 109 5 1800 184T 575 GP100 Ball 1LE22111CB313AA3 617 GP2 5.36 90.2 109 5 1200 215T 208-230/460 GP100 Ball 1LE22112AC214AA3 1110 GP2 6.8 90.2 163 5 1200 215T 575 GP100 Ball 1LE22112AC213AA3 1110 GP2 5.44 90.2 163 7.5 3600 213T 208-230/460 GP100 Ball 1LE22112AA114AA3 891 GP2 8.5 91.7 178 7.5 3600 213T 575 GP100 Ball 1LE22112AA113AA3 891 GP2 6.8 91.7 178 7.5 1800 213T 208-230/460 GP100 Ball 1LE22112AB114AA3 864 GP2 9.5 92.4 178 7.5 1800 213T 575 GP100 Ball 1LE22112AB113AA3 864 GP2 7.6 92.4 178 7.5 1200 254T 208-230/460 GP100 Ball 1LE22112BC114AA3 1489 GP2 10.5 92.4 307 7.5 1200 254T 575 GP100 Ball 1LE22112BC113AA3 1489 GP2 8.4 92.4 307 10 3600 215T 208-230/460 GP100 Ball 1LE22112AA214AA3 1051 GP2 11.5 91.7 185 10 3600 215T 575 GP100 Ball 1LE22112AA213AA3 1051 GP2 9.2 91.7 185 10 1800 215T 208-230/460 GP100 Ball 1LE22112AB214AA3 1051 GP2 12.5 92.4 185 10 1800 215T 575 GP100 Ball 1LE22112AB213AA3 1051 GP2 10 92.4 185 10 1200 256T 208-230/460 GP100 Ball 1LE22112BC214AA3 1750 GP2 13.5 92.4 307 10 1200 256T 575 GP100 Ball 1LE22112BC213AA3 1750 GP2 10.8 92.4 307 15 3600 254T 208-230/460 GP100 Ball 1LE22112BA114AA3 1443 GP2 17 92.4 279 15 3600 254T 575 GP100 Ball 1LE22112BA113AA3 1443 GP2 13.6 92.4 279 15 1800 254T 208-230/460 GP100 Ball 1LE22112BB114AA3 1408 GP2 19 93 268 15 1800 254T 575 GP100 Ball 1LE22112BB113AA3 1408 GP2 15.2 93 268 20 3600 256T 208-230/460 GP100 Ball 1LE22112BA214AA3 1785 GP2 23 92.4 303 20 3600 256T 575 GP100 Ball 1LE22112BA213AA3 1785 GP2 18 92.4 303 20 1800 256T 208-230/460 GP100 Ball 1LE22112BB214AA3 1695 GP2 25 93.6 311 20 1800 256T 575 GP100 Ball 1LE22112BB213AA3 1695 GP2 20 93.6 311 Prices and specifications are subject to change without notice Stock availability subject to sale Stock Model delivery for stocked motors only *FL Amps at 460V or 575V

General Purpose - TEFC GP100 (Cast Iron Frame - Copper Rotor) HP RPM Frame Voltage Type C-Face, Horizontal, Footless DOE#CC032A DE Bearing NEMA Premium Efficiency Plus List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 1800 143TC 208-230/460 GP100 Ball 1LE22111AB214GA3 468 GP2 1.5 86.5 67 1 1800 143TC 575 GP100 Ball 1LE22111AB213GA3 468 GP2 1.2 86.5 67 1 1200 145TC 208-230/460 GP100 Ball 1LE22111AC314GA3 565 GP2 1.6 84 67 1 1200 145TC 575 GP100 Ball 1LE22111AC313GA3 565 GP2 1.28 84 67 1.5 3600 143TC 208-230/460 GP100 Ball 1LE22111AA214GA3 478 GP2 1.9 87.5 65 1.5 3600 143TC 575 GP100 Ball 1LE22111AA213GA3 478 GP2 1.52 87.5 65 1.5 1800 145TC 208-230/460 GP100 Ball 1LE22111AB314GA3 508 GP2 2.1 87.5 67 1.5 1800 145TC 575 GP100 Ball 1LE22111AB313GA3 508 GP2 1.68 87.5 67 2 3600 145TC 208-230/460 GP100 Ball 1LE22111AA314GA3 544 GP2 2.6 88.5 66 2 3600 145TC 575 GP100 Ball 1LE22111AA313GA3 544 GP2 2.08 88.5 66 2 1800 145TC 208-230/460 GP100 Ball 1LE22111AB414GA3 545 GP2 2.8 87.5 68 2 1800 145TC 575 GP100 Ball 1LE22111AB413GA3 545 GP2 2.24 87.5 68 3 3600 182TC 208-230/460 GP100 Ball 1LE22111CA114GA3 633 GP2 3.8 89.5 101 3 3600 182TC 575 GP100 Ball 1LE22111CA113GA3 633 GP2 3.04 89.5 101 3 1800 182TC 208-230/460 GP100 Ball 1LE22111CB114GA3 651 GP2 4 90.2 105 3 1800 182TC 575 GP100 Ball 1LE22111CB113GA3 651 GP2 3.2 90.2 105 3 1200 213TC 208-230/460 GP100 Ball 1LE22112AC114GA3 854 GP2 4.3 90.2 150 3 1200 213TC 575 GP100 Ball 1LE22112AC113GA3 854 GP2 3.44 90.2 150 5 3600 184TC 208-230/460 GP100 Ball 1LE22111CA314GA3 792 GP2 6.2 90.2 103 5 3600 184TC 575 GP100 Ball 1LE22111CA313GA3 792 GP2 4.96 90.2 103 5 1800 184TC 208-230/460 GP100 Ball 1LE22111CB314GA3 727 GP2 6.7 90.2 109 5 1800 184TC 575 GP100 Ball 1LE22111CB313GA3 727 GP2 5.36 90.2 109 5 1200 215TC 208-230/460 GP100 Ball 1LE22112AC214GA3 1219 GP2 6.8 90.2 163 5 1200 215TC 575 GP100 Ball 1LE22112AC213GA3 1219 GP2 5.44 90.2 163 7.5 3600 213TC 208-230/460 GP100 Ball 1LE22112AA114GA3 1001 GP2 8.5 91.7 178 7.5 3600 213TC 575 GP100 Ball 1LE22112AA113GA3 1001 GP2 6.8 91.7 178 7.5 1800 213TC 208-230/460 GP100 Ball 1LE22112AB114GA3 973 GP2 9.5 92.4 178 7.5 1800 213TC 575 GP100 Ball 1LE22112AB113GA3 973 GP2 7.6 92.4 178 7.5 1200 254TC 208-230/460 GP100 Ball 1LE22112BC114GA3 1636 GP2 10.5 92.4 307 7.5 1200 254TC 575 GP100 Ball 1LE22112BC113GA3 1636 GP2 8.4 92.4 307 10 3600 215TC 208-230/460 GP100 Ball 1LE22112AA214GA3 1160 GP2 11.5 91.7 185 10 3600 215TC 575 GP100 Ball 1LE22112AA213GA3 1160 GP2 9.2 91.7 185 10 1800 215TC 208-230/460 GP100 Ball 1LE22112AB214GA3 1160 GP2 12.5 92.4 185 10 1800 215TC 575 GP100 Ball 1LE22112AB213GA3 1160 GP2 10 92.4 185 10 1200 256TC 208-230/460 GP100 Ball 1LE22112BC214GA3 1898 GP2 13.5 92.4 307 10 1200 256TC 575 GP100 Ball 1LE22112BC213GA3 1898 GP2 10.8 92.4 307 15 3600 254TC 208-230/460 GP100 Ball 1LE22112BA114GA3 1591 GP2 17 92.4 279 15 3600 254TC 575 GP100 Ball 1LE22112BA113GA3 1591 GP2 13.6 92.4 279 15 1800 254TC 208-230/460 GP100 Ball 1LE22112BB114GA3 1556 GP2 19 93 268 15 1800 254TC 575 GP100 Ball 1LE22112BB113GA3 1556 GP2 15.2 93 268 20 3600 256TC 208-230/460 GP100 Ball 1LE22112BA214GA3 1932 GP2 23 92.4 303 20 3600 256TC 575 GP100 Ball 1LE22112BA213GA3 1932 GP2 18 92.4 303 20 1800 256TC 208-230/460 GP100 Ball 1LE22112BB214GA3 1843 GP2 25 93.6 311 20 1800 256TC 575 GP100 Ball 1LE22112BB213GA3 1843 GP2 20 93.6 311 Prices and specifications are subject to change without notice Stock availability subject to sale Exceeds Energy Independence & Security Act Efficiency Levels 2010 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model delivery for stocked motors only *FL Amps at 460V or 575V 2-27 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose (GP ) Description Type / Frame List Price Adder Per Frame ($) Order GP10A GP10 143 182 213 254 284 324 364 404 444 447 Code Code Pos GP100A GP100 145 184 215 256 286 326 365 405 445 449 Altitude / Ambient Rerate/Derate Y80 Z 140-250 140-440 110 110 110 110 110 110 110 110 110 110 110 Assembly - Mounting & Terminal Box Position F-2 2 16 140-250 140-440 200 200 200 200 200 200 200 200 200 200 - F-3 0 16 140-250 - 90 90 90 90 - - - - - - - W-1 9+R1A 16+Z 140-250 140-440 200 200 200 200 200 200 200 200 200 200 - W-2 9+R2A 16+Z 140-250 140-440 90 90 90 90 90 90 90 90 90 90 90 W-3 9+R3A 16+Z 140-250 140-440 90 90 90 90 90 90 90 90 90 90 90 W-4 9+R4A 16+Z 140-250 140-440 200 200 200 200 200 200 200 200 200 200 - W-5 6 16 140-250 140-440 200 200 200 200 200 200 200 200 200 200 - W-8 7 16 140-250 140-440 90 90 90 90 90 90 90 90 90 90 90 C-1 8 16 140-250 140-440 200 200 200 200 200 200 200 200 200 200 - C-2 1 16 140-250 140-440 90 90 90 90 90 90 90 90 90 90 90 Bearings Sealed Ball bearings 1 L68 Z - 140-440 160 160 160 320 320 320 400 640 640 640 800 (except 2 pole, 360+ frames) Breathers & Drain Plugs T Drain SS L45 Z - 140-440 110 110 110 160 160 160 210 210 210 210 210 Crouse Hinds - UL Approved L46 Z - 280-440 - - - - 240 240 240 240 240 240 240 Conduit Box - Main Orient 90 deg CCW J84 Z 140-250 140-440 90 90 90 90 90 90 90 90 90 90 90 Orient 180 deg CCW J85 Z 140-250 140-440 90 90 90 90 90 90 90 90 90 90 90 Orient 270 deg CCW J86 Z 140-250 140-440 90 90 90 90 90 90 90 90 90 90 90 Conduit Box - Auxiliary for Thermostats Condulet to Main Box J12 Z - 440 165 165 165 165 165 165 165 Conduit Box - Auxiliary for Space Heaters Condulet to Main Box J52 Z - 440 165 165 165 165 165 165 165 Drip Cover Drip cover without vertical K33 Z 140-250 140-440 106 106 106 114 114 204 414 580 1072 1072 1072 lifting devices Export Packaging Sea Freight - Siemens Sandard B09 Z 140-250 140-440 225 225 225 225 510 760 760 1010 1010 1010 1010 Flanged End Shields C-Face w/ Feet 2 E 14 140-250 140-440 143 173 197 435 602 651 703 872 1033 1033 - C-Face w/o Feet G 14 140-250 140-250 157 196 220 470 675 741 947 1220 1451 1678 - D-Flange w/ Feet F 14 140-250 140-250 196 249 273 534 - - - - - - - Grounding Provision (tapped hole on L27 Z - 140-440 95 95 95 110 110 125 125 125 175 175 175 frame w/bolt) Hardware Stainless Steel L22 Z - 140-440 134 134 134 134 134 165 203 250 308 379 425 Lifting Eyebolt 3 L20 Z Standard 140 30 std std std std std std std std std std Insulation Fungus Protection C07 Z - 140-440 142 142 142 208 208 208 208 360 360 360 360 For further details please refer to section 8 1 Sealed Ball not available for 2 pole motors with frames > 360 2 C face with fee for 440 frames, only available with ball bearings 3 Lisfting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 2-28 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose (GP ) Description Type / Frame List Price Adder Per Frame ($) Order GP10A GP10 143 182 213 254 284 324 364 404 444 447 Code Code Pos GP100A GP100 145 184 215 256 286 326 365 405 445 449 Leads / Terminal Blocks Burndy Hydent type YA K80 Z 140-250 140-440 115 115 115 115 115 115 115 115 115 115 115 Sealed Leads K89 Z - 280-440 150 150 150 150 150 150 200 200 200 200 200 Lubrication Grease Fitting / L60 Z - 280-440 125 125 125 125 125 125 125 125 125 125 125 Pressure Relief Nameplate Extra M21 Z 140-250 140-440 110 110 110 110 110 110 110 110 110 110 110 Division 2 4 M22 Z - 140-440 205 205 205 205 205 205 205 205 205 205 205 Change (Rerate/Derate) Y80 Z 140-250 140-440 110 110 110 110 110 110 110 110 110 110 110 Auxiliary Y82 Z 140-250 140-440 110 110 110 110 110 110 110 110 110 110 110 Protective Devices - Windings Thermostats, normally G 15-140-440 150 150 150 150 150 200 200 300 300 370 370 closed, 2 per motor Rotation Arrow Bidirectional (not applicable K70 Z 140-250 140-440 95 95 95 95 95 95 95 95 95 95 95 for uni-directional motors) Clockwise (facing ODE) K71 Z 140-250 140-440 95 95 95 95 95 95 95 95 95 95 95 Counterclockwise K72 Z 140-250 140-440 95 95 95 95 95 95 95 95 95 95 95 (facing ODE) Service Factor Rerate/Derate Y80 Z 140-250 140-440 110 110 110 110 110 110 110 110 110 110 110 Shaft Seal Slinger & O Ring L76 Z 140-250 140-440 60 60 60 85 85 115 115 145 145 145 145 (4, 6, 8 Pole only) Software Documentation in Spanish D05 Z 140-250 140-440 0 0 0 0 0 0 0 0 0 0 0 Certificate of Compliance F00 Z 140-250 140-440 200 200 200 200 200 200 200 200 200 200 200 Standard Transmittal F40 Z 140-250 140-440 30 30 30 30 30 30 30 30 30 30 30 Standard Dimension Sheet F42 Z 140-250 140-440 30 30 30 30 30 30 30 30 30 30 30 Conduit Box Dimension Sheet F44 Z 140-250 140-440 30 30 30 30 30 30 30 30 30 30 30 Wiring Diagram F45 Z 140-250 140-440 30 30 30 30 30 30 30 30 30 30 30 IOM F46 Z 140-250 140-440 30 30 30 30 30 30 30 30 30 30 30 Renewal Parts F47 Z 140-250 140-440 30 30 30 30 30 30 30 30 30 30 30 Sheets F49 Z 140-250 140-440 175 175 175 175 175 175 175 175 175 175 175 F03 Z 140-250 140-440 500 500 500 500 500 500 500 500 500 500 500 Space Heater 115V, Single Phase A40 Z - 140-440 237 237 237 237 351 351 351 407 407 407 407 230V, Single Phase A41 Z - 140-440 237 237 237 237 351 351 351 407 407 407 407 115V, Single Phase, Div 2 A42 Z - 140-440 292 292 292 292 436 436 524 640 758 856 856 230V, Single Phase, Div 2 A44 Z - 140-440 292 292 292 292 436 436 524 640 758 856 856 For further details please refer to section 8 1 Sealed Ball not available for 2 pole motors with frames > 360 2 C face with fee for 440 frames, only available with ball bearings 3 Lisfting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 2-29 Dimensions

Introduction General Purpose General Purpose (GP ) Description Type / Frame List Price Adder Per Frame ($) Order GP10A GP10 143 182 213 254 284 324 364 404 444 447 Code Code Pos GP100A GP100 145 184 215 256 286 326 365 405 445 449 Testing Routine Test Report F10 Z 140-250 140-440 200 200 200 200 200 200 200 200 200 200 200 Routine Test Report with F20 Z 140-250 140-440 400 400 400 400 400 400 400 400 400 400 400 Vibration Test Voltage Single Voltage - 230V 11 12&13 140-250 75HP 85 85 95 110 110 110 140 140 - - - (outside leads connection only) Single Voltage - 460V (outside leads connection only) 12 12&13 140-250 75HP 85 85 95 110 110 110 140 140 - - - For further details please refer to section 8 1 Sealed Ball not available for 2 pole motors with frames > 360 2 C face with fee for 440 frames, only available with ball bearings 3 Lisfting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 Dimensions Duty Duty Purpose 2-30 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose (RGZP ) Description Code Order Code Pos Type / Frame RGZP List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Altitude / Ambient Rerate/Derate Y80 Z 280-440 110 110 110 110 110 110 110 110 110 110 110 Assembly - Mounting & Terminal Box Position F-2 2 16 280-440 200 200 200 200 200 200 200 200 200 200 - W-1 9+R1A 16+Z 280-440 200 200 200 200 200 200 200 200 200 200 - W-2 9+R2A 16+Z 280-440 90 90 90 90 90 90 90 90 90 90 90 W-3 9+R3A 16+Z 280-440 90 90 90 90 90 90 90 90 90 90 90 W-4 9+R4A 16+Z 280-440 200 200 200 200 200 200 200 200 200 200 - W-5 6 16 280-440 200 200 200 200 200 200 200 200 200 200 - W-8 7 16 280-440 90 90 90 90 90 90 90 90 90 90 90 C-1 8 16 280-440 200 200 200 200 200 200 200 200 200 200 - C-2 1 16 280-440 90 90 90 90 90 90 90 90 90 90 90 Bearings Sealed Ball bearings 1 L68 Z 280-440 160 160 160 320 320 320 400 640 640 640 800 (except 2 pole, 360+ frames) Breathers and Drain Plugs T Drain SS L45 Z 280-440 110 110 110 160 160 160 210 210 210 210 210 Crouse Hinds - UL Approved L46 Z 280-440 - - - - 240 240 240 240 240 240 240 Conduit Box - Main Orient 90 deg CCW J84 Z 280-440 90 90 90 90 90 90 90 90 90 90 90 Orient 180 deg CCW J85 Z 280-440 90 90 90 90 90 90 90 90 90 90 90 Orient 270 deg CCW J86 Z 280-440 90 90 90 90 90 90 90 90 90 90 90 Conduit Box - Auxiliary for Thermostats Condulet to Main Box J12 Z 280-440 165 165 165 165 165 165 165 165 165 165 165 Conduit Box - Auxiliary for Space Heaters Condulet to Main Box J52 Z 280-440 165 165 165 165 165 165 165 165 165 165 165 Drip Cover Drip cover without vertical lifting devices K33 Z 280-440 106 106 106 114 114 204 414 580 1072 1072 1072 Export Packaging Sea Freight - Siemens Standard B09 Z 280-440 225 225 225 225 510 760 760 1010 1010 1010 1010 Flanged End Shields C-Face with Feet 2 E 14 280-440 143 173 197 435 602 651 703 872 1033 1033 - Grounding Provision (tapped hole on frame w/bolt) L27 Z 280-440 95 95 95 110 110 125 125 125 175 175 175 Hardware Stainless Steel L22 Z 280-440 134 134 134 134 134 165 203 250 308 379 425 Lifting Eyebolt 3 L20 Z Standard 30 std std std std std std std std std std Insulation Fungus Protection C07 Z 280-440 142 142 142 208 208 208 208 360 360 360 360 Leads / Terminal Blocks Burndy Hydent type YA K80 Z 280-440 115 115 115 115 115 115 115 115 115 115 115 Sealed Leads K89 Z 280-440 150 150 150 150 150 150 200 200 200 200 200 Lubrication Grease Fitting / Pressure Relief L60 Z 280-440 125 125 125 125 125 125 125 125 125 125 125 S449 Introduction General Purpose Duty Duty Purpose For further details please refer to section 8 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. 2009-2010 Low Voltage AC Selection and Pricing Guide 2-31 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose (RGZP ) Description Code Order Code Pos Type / Frame RGZP List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Nameplate Extra M21 Z 280-440 110 110 110 110 110 110 110 110 110 110 110 Division 2 4 M22 Z 280-440 205 205 205 205 205 205 205 205 205 205 205 Change (Rerate/Derate) Y80 Z 280-440 110 110 110 110 110 110 110 110 110 110 110 Auxiliary Y82 Z 280-440 110 110 110 110 110 110 110 110 110 110 110 Protective Devices - Windings Thermostats, normally closed, 2 per G 15 280-440 150 150 150 150 150 200 200 300 300 370 370 motor Rotation Arrow Bidirectional K70 Z 280-440 95 95 95 95 95 95 95 95 95 95 95 (not applicable for uni-directional motors) Clockwise (facing ODE) K71 Z 280-440 95 95 95 95 95 95 95 95 95 95 95 Counterclockwise (facing ODE) K72 Z 280-440 95 95 95 95 95 95 95 95 95 95 95 Service Factor Rerate/Derate Y80 Z 280-440 110 110 110 110 110 110 110 110 110 110 110 Shaft Seal Slinger & O Ring (4, 6, 8 Pole only) L76 Z 280-440 60 60 60 85 85 115 115 145 145 145 145 Inpro Seal / DE L79 Z - 363 363 379 442 458 482 553 679 742 742 742 Inpro Seal / ODE L80 Z - 363 363 379 442 458 482 553 679 742 742 742 Inpro Seal / Both Ends L81 Z - 726 726 758 884 916 964 1106 1358 1484 1484 1484 Software Documentation in Spanish D05 Z 280-440 0 0 0 0 0 0 0 0 0 0 0 Certificate of Compliance F00 Z 280-440 200 200 200 200 200 200 200 200 200 200 200 Standard Transmittal F40 Z 280-440 30 30 30 30 30 30 30 30 30 30 30 Standard Dimension Sheet F42 Z 280-440 30 30 30 30 30 30 30 30 30 30 30 Conduit Box Dimension Sheet F44 Z 280-440 30 30 30 30 30 30 30 30 30 30 30 Wiring Diagram F45 Z 280-440 30 30 30 30 30 30 30 30 30 30 30 IOM F46 Z 280-440 30 30 30 30 30 30 30 30 30 30 30 Renewal Parts F47 Z 280-440 30 30 30 30 30 30 30 30 30 30 30 Sheets F49 Z 280-440 175 175 175 175 175 175 175 175 175 175 175 F03 Z 280-440 500 500 500 500 500 500 500 500 500 500 500 Space Heater 115V, Single Phase A40 Z 280-440 237 237 237 237 351 351 351 407 407 407 407 230V, Single Phase A41 Z 280-440 237 237 237 237 351 351 351 407 407 407 407 115V, Single Phase, Div 2 A42 Z 280-440 292 292 292 292 436 436 524 640 758 856 856 230V, Single Phase, Div 2 A44 Z 280-440 292 292 292 292 436 436 524 640 758 856 856 Testing Routine Test Report F10 Z 280-440 200 200 200 200 200 200 200 200 200 200 200 Routine Test Report with Vibration Test F20 Z 280-440 400 400 400 400 400 400 400 400 400 400 400 Voltage Single Voltage - 230V 11 12&13 75HP 85 85 95 110 110 110 140 - - - - (outside leads connection only) Single Voltage - 460V (outside leads connection only) 12 12&13 75HP 85 85 95 110 110 110 140 - - - - For further details please refer to section 8 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. S449 2-32 2009-2010 Low Voltage AC Selection and Pricing Guide

Options General Purpose (GP ) Description Type / Frame List Price Adder Per Frame ($) Order GP10A GP10 143 182 213 254 284 324 364 404 444 447 Code Code Pos GP100A GP100 145 184 215 256 286 326 365 405 445 449 Assembly - Mounting & Terminal Box Position W-6 4 16-440-440 - - - - - - - 140 140 140 140 W-7 5 16-440 - - - - - - - 200 200 200 - Auxiliary Boxes 1 Auxiliary conduit box location (Digit 2) Condulet on main box J 0 Z - 280-440 - - - - 165 165 165 165 165 165 165 side Condulet to main J 2 Z - 140-440 165 165 165 165 165 165 165 165 165 165 165 conduit box Auxiliary conduit box J 3 Z - 280-440 - - - - 291 291 291 291 291 291 291 on main conduit box Condulet - opposite of J 4 Z - 180-440 165 165 165 165 165 165 165 165 165 165 165 main conduit box side Auxiliary box- opposite of main conduit box side J 5 Z - 280-440 165 165 165 165 291 291 291 291 291 291 291 Temperature Detector Device (Digit 1) Thermistors 0 Thermostats 1 KTY 84 Thermistor 2 Space heaters 5 Stator RTD s to auxiliary conduit box of opposite of main box side Balance Select the number that corresponds with the appropriate Temperature Detector Device to create your initial 3 digital ordering code. J35-280-440 - - - - 291 291 291 291 291 291 291 Precision M69 Z - 140-440 - 128 128 147 147 167 167 211 211 404 404 Extra Precision M70 Z - 140-440 - 216 216 228 228 260 260 350 350 450 450 Bearings Insulated L66 Z - 280-440 765 765 1050 1315 1665 1975 2350 5100 7850 7850 7850 Insulated - ODE only L67 Z - 280-440 385 385 525 660 835 990 1175 2550 3925 3925 5530 Couplings er Supplied H10 Z - 140-440 325 325 325 325 325 325 480 480 480 480 480 Export Packaging Special B10 Z 140-250 140-440 cf cf cf cf cf cf cf cf cf cf cf Fans Bronze M10 Z - 140-440 418 418 540 575 720 870 910 1014 1400 1400 1400 For further details please refer to section 9 1 Condulet or Auxiliary box to Main only available for GP motors when ordered with Cast Iron Terminal Box For availability on Flanges and End shields as Options see page 9-14 S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 2-33 Dimensions

Introduction General Purpose Duty Duty Options General Purpose (GP ) Description Insulation Type / Frame List Price Adder Per Frame ($) Order GP10A GP10 143 182 213 254 284 324 364 404 444 447 Code Code Pos GP100A GP100 145 184 215 256 286 326 365 405 445 449 Class H C00 Z - 140-440 82 82 82 105 175 230 294 425 606 1573 1573 Vacuum Pressure Impregnation (VPI) C01 Z - 140-440 1120 1120 1120 1120 1440 1440 1820 2300 2500 2500 3600 Moisture/Powerhouse C04 Z - 140-440 105 105 105 137 227 294 373 524 722 1234 1234 (extra dip & bake) Tropicalization Moisture C08 Z - 140-440 146 146 146 189 314 405 510 708 961 1528 1528 (extra dip & bake, fungus spray) Leads / Terminal Blocks Terminal Block - 3 lead K83 Z - 140-360 150 150 150 225 225 330 330 - - - - only Leads, Special Cable Y85 Z - 140-440 cf cf cf cf cf cf cf cf cf cf cf Length Lubrication Special Grease (High & L57 Z - 140-440 325 600 600 600 600 825 825 1100 1100 1100 1100 Low Temp) (Mobil 28) Special Grease (Mobilith L58 Z - 140-440 225 225 225 225 225 425 425 425 425 425 425 SHC 100) Paint Paint - 2 Part Epoxy N02 Z - - 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 Standard Primer Only N03 Z 140-250 140-440 385 385 385 385 385 385 385 385 385 385 385 Standard Paint, Special Y60 Z 140-250 140-440 385 385 385 385 385 385 385 385 385 385 385 Color Special Paint, Special Color Y61 Z 140-250 140-440 cf cf cf cf cf cf cf cf cf cf cf For further details please refer to section 9 1 Condulet or Auxiliary box to Main only available for GP motors when ordered with Cast Iron Terminal Box S449 Dimensions Purpose 2-34 2009-2010 Low Voltage AC Selection and Pricing Guide

Options General Purpose (GP ) Description Type / Frame List Price Adder Per Frame ($) Order GP10A GP10 143 182 213 254 284 324 364 404 444 447 S449 Code Code Pos GP100A GP100 145 184 215 256 286 326 365 405 445 449 Protective Devices - Windings PTC thermistors, 3 B 15-140-440 425 425 425 425 425 425 425 425 425 425 425 embedded temperature sensors for tripping PTC thermistors, 6 C 15-140-440 850 850 850 850 850 850 850 850 850 850 850 embedded temperature sensors for alarm and tripping KTY84-130, 2 F 15-140-440 658 658 658 658 658 658 658 658 658 658 658 embedded temperature sensors Thermocouples, J 15-360-440 - - - - - - 1186 1186 1186 1186 1186 coil head Winding temperature protection, Stator RTD s (coil head, 1 per phase), 100Ω Platinum, complete with auxiliary box with terminal strip opposite to main box K 15-360-440 - - - - - - 1996 1996 1996 1996 1996 Protective Devices - Bearings Bearing thermal A51 Z - 400-440 - - - - - - - 2200 2200 2200 2200 protection, Bearing RTDs with connection head and terminal block - both ends, 100Ω Platinum Shafts Carbon Steel (C4140) M57 Z - - - - - - - - - 2975 3190 3365 3365 Shaft DE Special to Y50 Z - 140-440 cf cf cf cf cf cf cf cf cf cf cf er Specifications Shaft ODE Special to Y51 Z - 140-250 cf cf cf cf cf cf cf cf cf cf cf er Specifications NEMA Standard Short M53 Z - 140-250 91 91 91 122 185 266 301 333 368 368 368 Shaft - ODE NEMA Standard Long Shaft - ODE M52 Z - 140-250 91 91 91 122 185 266 301 333 368 368 368 For further details please refer to section 9 1 Condulet or Auxiliary box to Main only available for GP motors when ordered with Cast Iron Terminal Box Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 2-35 Dimensions

Introduction General Purpose Options General Purpose (GP ) Description Type / Frame List Price Adder Per Frame ($) Order GP10A GP10 143 182 213 254 284 324 364 404 444 447 S449 Code Code Pos GP100A GP100 145 184 215 256 286 326 365 405 445 449 Software Nonstandard F43 Z 140-250 140-440 350 350 350 350 350 350 350 350 350 350 350 Dimension Sheet er Specific F50 Z 140-250 140-440 350 350 350 350 350 350 350 350 350 350 350 Sheets Special Calculated F07 Z 140-250 140-440 850 850 850 850 850 850 850 850 850 850 850 Terminal Box - Main Cast Iron Instead of L01 Z - 140-400 115 120 125 130 140 155 170 195 - - - Cast Aluminum or Steel Testing Routine Test Report F12 Z 140-250 140-440 1100 1100 1100 1100 1100 1320 1500 1720 1860 2420 3040 - (Witnessed) Complete Test F15 Z 140-250 140-440 4560 4560 4560 4560 4560 5300 6480 7400 8040 8960 13520 Complete Test (Witnessed) F17 Z 140-250 140-440 6840 6840 6840 6840 6840 7960 9720 11100 12060 13440 20280 Calibration Test F27 Z 140-250 140-3420 3420 3420 3420 3420 3975 4860 5550 6030 6720 10140 S449 Electrical Duplicate- F36 Z 140-250 140-200 200 200 200 200 200 200 200 200 200 200 (Routine Test) S449 Electrical Duplicate (Complete Test) F37 Z 140-250 140- S449 300 300 300 300 300 300 300 300 300 300 300 Noise F30 Z 140-250 140-2800 2800 2800 2800 2800 2800 3600 3600 3600 3600 3600 S449 Noise (Witnessed) F32 Z 140-250 140-4400 4400 4400 4400 4400 4400 5200 5200 5200 5200 5200 S449 Routine Test Report with Vibration Test (Witnessed) Vertical Jacking Vertical Jacking Provision F22 Z 140-250 140- S449 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 M39 Z - 280-440 - - - - 600 600 600 600 600 600 600 For further details please refer to section 9 1 Condulet or Auxiliary box to Main only available for GP motors when ordered with Cast Iron Terminal Box Dimensions Duty Duty Purpose 2-36 2009-2010 Low Voltage AC Selection and Pricing Guide

Options General Purpose (GP ) Description Voltage Special Voltage 200-460V Special Voltage 461-600V Part Winding Start - 200V, 60Hz Part Winding Start - 230V, 60Hz Part Winding Start - 460V, 60Hz Part Winding Start - 575V, 60Hz Wye Start - Delta Run - 200V, 60Hz Wye Start - Delta Run - 230V, 60Hz Wye Start - Delta Run - 460V, 60Hz Wye Start - Delta Run - 575V, 60Hz Type / Frame List Price Adder Per Frame ($) Order GP10A GP10 143 182 213 254 284 324 364 404 444 447 Code Code Pos GP100A GP100 145 184 215 256 286 326 365 405 445 449 9-0 + M1Y 12,13+Z 140-250 140-440 81 81 81 112 134 323 366 479 796 979 979 9-0 + 12,13+Z 140-250 140-440 81 81 81 112 134 323 366 479 796 979 979 M2Y 20 12&13-280-360 - - - - 104 126 185 - - - - 21 12&13-280-360 - - - - 104 126 185 - - - - 22 12&13-280-440 - - - - 104 126 185 290 482 506 506 23 12&13-280-440 - - - - 104 126 185 290 482 506 506 30 12&13-280-360 - - - - 104 126 185 - - - - 31 12&13-280-360 - - - - 104 126 185 - - - - 32 12&13-280-440 - - - - 104 126 185 290 482 506 506 33 12&13-280-440 - - - - 104 126 185 290 482 506 506 For further details please refer to section 9 1 Condulet or Auxiliary box to Main only available for GP motors when ordered with Cast Iron Terminal Box S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 2-37 Dimensions

Notes Dimensions Introduction Purpose Duty Duty General Purpose 2-38 2009-2010 Low Voltage AC Selection and Pricing Guide

- TEFC SD10 SD10 severe duty TEFC motors meets or exceeds EPAct efficiency standards. They are ideal for both indoor and outdoor applications and in severe operating atmospheres. These industry workhorses are for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/chemical applications. Specifications 1 to 400 HP 1.15 service factor, 40ºC ambient 3600, 1800, 1200 & 900 RPM 3-phase, 60 Hz; 208-230/460 and 575 volt operation (143T 256T) 3-phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above, 200 & 575 volt available (284T S449) Meets or exceeds EPAct efficiency standards Class F insulation, Class B temperature rise @ 1.0SF NEMA design B, continuous duty 143T to S449 frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation T-drains are provided. Lifting eyebolts are included with motors > 75 lbs. Rotor A unique rotor design provides improved efficiency. Large cross section bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses. Insulation Proprietary inverter-rated Class F non-hygroscopic insulation system with NEMA Class B temperature rise @ 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. This insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized double shielded (143T 256T) / single shielded (284T S449T) with cast iron inner caps. Alemite grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance. Frames 143T 256T are equipped with drive end and opposite drive end shaft V-ring slingers for added bearing protection. Provisions for Inpro/Seal bearing isolators are standard on both ends. Frames 284T S449 are equipped with a drive end shaft V-ring slinger. High Efficiency Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. A ground lug is included. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, polycarbonate fan, zincplated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose Specifications table begins on the next page 2009-2010 Low Voltage AC Selection and Pricing Guide 3-1 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC SD10 HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 3600 143T 208-230/460 SD10 Ball 1LE23011AA114AA3 350 SD1 1.4 80 65 1 3600 143T 575 SD10 Ball 1LE23011AA113AA3 350 SD1 1.12 80 65 1 1800 143T 208-230/460 SD10 Ball 1LE23011AB214AA3 336 SD1 1.5 82.5 67 1 1800 143T 575 SD10 Ball 1LE23011AB213AA3 336 SD1 1.2 82.5 67 1 1200 145T 208-230/460 SD10 Ball 1LE23011AC314AA3 418 SD1 1.6 80 67 1 1200 145T 575 SD10 Ball 1LE23011AC313AA3 418 SD1 1.28 80 67 1 900 182T 208-230/460 SD10 Ball 1LE23011CD114AA3 655 SD1 2.1 74 106 1 900 182T 575 SD10 Ball 1LE23011CD113AA3 655 SD1 1.64 74 106 1.5 3600 143T 208-230/460 SD10 Ball 1LE23011AA214AA3 355 SD1 2 82.5 66 1.5 3600 143T 575 SD10 Ball 1LE23011AA213AA3 355 SD1 1.6 82.5 66 1.5 1800 145T 208-230/460 SD10 Ball 1LE23011AB314AA3 373 SD1 2.2 84 71 1.5 1800 145T 575 SD10 Ball 1LE23011AB313AA3 373 SD1 1.76 84 71 1.5 1200 182T 208-230/460 SD10 Ball 1LE23011CC114AA3 464 SD1 2.4 85.5 103 1.5 1200 182T 575 SD10 Ball 1LE23011CC113AA3 464 SD1 1.92 85.5 103 1.5 900 184T 208-230/460 SD10 Ball 1LE23011CD314AA3 737 SD1 3 77 119 1.5 900 184T 575 SD10 Ball 1LE23011CD313AA3 737 SD1 2.4 77 119 2 3600 145T 208-230/460 SD10 Ball 1LE23011AA314AA3 422 SD1 2.6 84 68 2 3600 145T 575 SD10 Ball 1LE23011AA313AA3 422 SD1 2.08 84 68 2 1800 145T 208-230/460 SD10 Ball 1LE23011AB414AA3 408 SD1 3 84 73 2 1800 145T 575 SD10 Ball 1LE23011AB413AA3 408 SD1 2.4 84 73 2 1200 184T 208-230/460 SD10 Ball 1LE23011CC314AA3 517 SD1 3.1 86.5 114 2 1200 184T 575 SD10 Ball 1LE23011CC313AA3 517 SD1 2.48 86.5 114 2 900 213T 208-230/460 SD10 Ball 1LE23012AD114AA3 856 SD1 3.3 82.5 143 2 900 213T 575 SD10 Ball 1LE23012AD113AA3 856 SD1 2.64 82.5 143 3 3600 182T 208-230/460 SD10 Ball 1LE23011CA114AA3 474 SD1 3.7 85.5 105 3 3600 182T 575 SD10 Ball 1LE23011CA113AA3 474 SD1 2.96 85.5 105 3 1800 182T 208-230/460 SD10 Ball 1LE23011CB114AA3 457 SD1 4 87.5 108 3 1800 182T 575 SD10 Ball 1LE23011CB113AA3 457 SD1 3.2 87.5 108 3 1200 213T 208-230/460 SD10 Ball 1LE23012AC114AA3 640 SD1 4 87.5 145 3 1200 213T 575 SD10 Ball 1LE23012AC113AA3 640 SD1 3.36 87.5 145 3 900 215T 208-230/460 SD10 Ball 1LE23012AD214AA3 1180 SD1 4.8 84 158 3 900 215T 575 SD10 Ball 1LE23012AD213AA3 1180 SD1 3.84 84 158 5 3600 184T 208-230/460 SD10 Ball 1LE23011CA314AA3 595 SD1 6.2 87.5 111 5 3600 184T 575 SD10 Ball 1LE23011CA313AA3 595 SD1 4.96 87.5 111 5 1800 184T 208-230/460 SD10 Ball 1LE23011CB314AA3 531 SD1 6.7 87.5 114 5 1800 184T 575 SD10 Ball 1LE23011CB313AA3 531 SD1 5.36 87.5 114 5 1200 215T 208-230/460 SD10 Ball 1LE23012AC214AA3 917 SD1 6.8 87.5 160 5 1200 215T 575 SD10 Ball 1LE23012AC213AA3 917 SD1 5.44 87.5 160 5 900 254T 208-230/460 SD10 Ball 1LE23012BD114AA3 1660 SD1 8.8 85.5 247 5 900 254T 575 SD10 Ball 1LE23012BD113AA3 1660 SD1 7.04 85.5 247 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only Stock Model *FL Amps at 460V or 575V Frames 280-440 available after RGZESD stock motors are depleted 1 CW Rotation facing opposite drive end 3-2 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC SD10 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 7.5 3600 213T 208-230/460 SD10 Ball 1LE23012AA114AA3 736 SD1 9 88.5 156 7.5 3600 213T 575 SD10 Ball 1LE23012AA113AA3 736 SD1 7.2 88.5 156 7.5 1800 213T 208-230/460 SD10 Ball 1LE23012AB114AA3 726 SD1 9.5 89.5 163 7.5 1800 213T 575 SD10 Ball 1LE23012AB113AA3 726 SD1 7.6 89.5 163 7.5 1200 254T 208-230/460 SD10 Ball 1LE23012BC114AA3 1222 SD1 10.5 89.5 253 7.5 1200 254T 575 SD10 Ball 1LE23012BC113AA3 1222 SD1 8.4 89.5 253 7.5 900 256T 208-230/460 SD10 Ball 1LE23012BD214AA3 1879 SD1 13 85.5 279 7.5 900 256T 575 SD10 Ball 1LE23012BD213AA3 1879 SD1 10.4 85.5 279 10 3600 215T 208-230/460 SD10 Ball 1LE23012AA214AA3 863 SD1 11.5 89.5 170 10 3600 215T 575 SD10 Ball 1LE23012AA213AA3 863 SD1 9.2 89.5 170 10 1800 215T 208-230/460 SD10 Ball 1LE23012AB214AA3 877 SD1 12.5 89.5 170 10 1800 215T 575 SD10 Ball 1LE23012AB213AA3 877 SD1 10 89.5 170 10 1200 256T 208-230/460 SD10 Ball 1LE23012BC214AA3 1476 SD1 13.5 89.5 265 10 1200 256T 575 SD10 Ball 1LE23012BC213AA3 1476 SD1 10.8 89.5 265 10 900 284T 230/460 SD10 Ball 1LE23012CD116AA3 2557 SD1 15 91 375 10 900 284T 575 SD10 Ball 1LE23012CD113AA3 2557 SD1 12 91 375 15 3600 254T 208-230/460 SD10 Ball 1LE23012BA114AA3 1185 SD1 18 90.2 257 15 3600 254T 575 SD10 Ball 1LE23012BA113AA3 1185 SD1 14.4 90.2 257 15 1800 254T 208-230/460 SD10 Ball 1LE23012BB114AA3 1162 SD1 19 91 256 15 1800 254T 575 SD10 Ball 1LE23012BB113AA3 1162 SD1 15.2 91 256 15 1200 284T 230/460 SD10 Ball 1LE23012CC116AA3 2096 SD1 20 91 375 15 1200 284T 575 SD10 Ball 1LE23012CC113AA3 2096 SD1 16 91 375 15 900 286T 230/460 SD10 Ball 1LE23012CD216AA3 3328 SD1 23 91 430 15 900 286T 575 SD10 Ball 1LE23012CD213AA3 3328 SD1 18.4 91 430 20 3600 256T 208-230/460 SD10 Ball 1LE23012BA214AA3 1467 SD1 23.5 90.2 70 20 3600 256T 575 SD10 Ball 1LE23012BA213AA3 1467 SD1 18.8 90.2 70 20 1800 256T 208-230/460 SD10 Ball 1LE23012BB214AA3 1433 SD1 25 91 275 20 1800 256T 575 SD10 Ball 1LE23012BB213AA3 1433 SD1 20 91 275 20 1200 286T 230/460 SD10 Ball 1LE23012CC216AA3 2554 SD1 26 91.7 430 20 1200 286T 575 SD10 Ball 1LE23012CC213AA3 2554 SD1 20.8 91.7 430 20 900 324T 230/460 SD10 Ball 1LE23013AD116AA3 4068 SD1 31 91 567 20 900 324T 575 SD10 Ball 1LE23013AD113AA3 4068 SD1 24.8 91 567 25 3600 284T 460 SD10 Ball 1LE23012CA112AA3 1914 SD1 29 91.7 375 25 3600 284TS 460 SD10 Ball 1LE23012DA112AA3 1914 SD1 29 91.7 375 25 3600 284TS 575 SD10 Ball 1LE23012DA113AA3 1914 SD1 23.2 91.7 375 25 1800 284T 460 SD10 Ball 1LE23012CB112AA3 1828 SD1 29 93 477 25 1800 284TS 460 SD10 Ball 1LE23012DB112AA3 1828 SD1 29 93 375 25 1800 284T 575 SD10 Ball 1LE23012CB113AA3 1828 SD1 23.2 93 375 25 1200 324T 460 SD10 Ball 1LE23013AC112AA3 3096 SD1 33 92.4 565 25 1200 324T 575 SD10 Ball 1LE23013AC113AA3 3096 SD1 26.4 92.4 565 25 900 326T 460 SD10 Ball 1LE23013AD212AA3 4730 SD1 38 90.2 600 25 900 326T 575 SD10 Ball 1LE23013AD213AA3 4730 SD1 30.4 90.2 600 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only DOE#CC032A High Efficiency 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model *FL Amps at 460V or 575V Frames 280-440 available after RGZESD stock motors are depleted 1 CW Rotation facing opposite drive end 3-3 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC SD10 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 30 3600 286T 460 SD10 Ball 1LE23012CA212AA3 2235 SD1 34 91.7 520 30 3600 286TS 460 SD10 Ball 1LE23012DA212AA3 2235 SD1 34 91.7 465 30 3600 286TS 575 SD10 Ball 1LE23012DA213AA3 2235 SD1 27.2 91.7 430 30 1800 286T 460 SD10 Ball 1LE23012CB212AA3 2125 SD1 35 93 494 30 1800 286TS 460 SD10 Ball 1LE23012DB212AA3 2125 SD1 35 93 494 30 1800 286T 575 SD10 Ball 1LE23012CB213AA3 2125 SD1 28 93 430 30 1200 326T 460 SD10 Ball 1LE23013AC212AA3 3566 SD1 39 92.4 669 30 1200 326T 575 SD10 Ball 1LE23013AC213AA3 3566 SD1 31.2 92.4 600 30 900 364T 460 SD10 Ball 1LE23013CD112AA3 5598 SD1 47 91 800 30 900 364T 575 SD10 Ball 1LE23013CD113AA3 5598 SD1 37.6 91 800 40 3600 324T 460 SD10 Ball 1LE23013AA112AA3 2948 SD1 45 93.6 565 40 3600 324TS 460 SD10 Ball 1LE23013BA112AA3 2948 SD1 45 93.6 565 40 3600 324TS 575 SD10 Ball 1LE23013BA113AA3 2948 SD1 36 93.6 565 40 1800 324T 460 SD10 Ball 1LE23013AB112AA3 2823 SD1 47 93.6 565 40 1800 324TS 460 SD10 Ball 1LE23013BB112AA3 2823 SD1 47 93.6 565 40 1800 324T 575 SD10 Ball 1LE23013AB113AA3 2823 SD1 37.6 93.6 565 40 1200 364T 460 SD10 Ball 1LE23013CC112AA3 4833 SD1 52 93.6 800 40 1200 364T 575 SD10 Ball 1LE23013CC113AA3 4833 SD1 41.6 93.6 800 40 900 365T 460 SD10 Ball 1LE23013CD212AA3 6769 SD1 63 91.7 875 40 900 365T 575 SD10 Ball 1LE23013CD213AA3 6769 SD1 50.4 91.7 875 50 3600 326T 460 SD10 Ball 1LE23013AA212AA3 3814 SD1 55 93.6 710 50 3600 326TS 460 SD10 Ball 1LE23013BA212AA3 3814 SD1 55 93.6 710 50 3600 326TS 575 SD10 Ball 1LE23013BA213AA3 3814 SD1 44 93.6 600 50 1800 326T 460 SD10 Ball 1LE23013AB212AA3 3467 SD1 58 93.6 600 50 1800 326TS 460 SD10 Ball 1LE23013BB212AA3 3467 SD1 58 93.6 639 50 1800 326T 575 SD10 Ball 1LE23013AB213AA3 3467 SD1 46.4 93.6 600 50 1200 365T 460 SD10 Ball 1LE23013CC212AA3 5549 SD1 66 93.6 875 50 1200 365T 575 SD10 Ball 1LE23013CC213AA3 5549 SD1 52.8 93.6 875 50 900 404T 460 SD10 Ball 1LE23014AD112AA3 8088 SD1 67 91.7 1135 50 900 404T 575 SD10 Ball 1LE23014AD113AA3 8088 SD1 53.6 91.7 1135 60 3600 364T 460 SD10 Ball 1LE23013CA112AA3 5017 SD1 68 93.6 800 60 3600 364TS 460 SD10 Ball 1LE23013DA112AA3 5017 SD1 68 93.6 800 60 3600 364TS 575 SD10 Ball 1LE23013DA113AA3 5017 SD1 54.4 93.6 800 60 1800 364T 460 SD10 Ball 1LE23013CB112AA3 4974 SD1 71 93.6 831 60 1800 364TS 460 SD10 Ball 1LE23013DB112AA3 4974 SD1 71 93.6 800 60 1800 364T 575 SD10 Ball 1LE23013CB113AA3 4974 SD1 56.8 93.6 800 60 1200 404T 460 SD10 Ball 1LE23014AC112AA3 6502 SD1 74 94.1 1135 60 1200 404T 575 SD10 Ball 1LE23014AC113AA3 6502 SD1 59.2 94.1 1135 60 900 405T 460 SD10 Ball 1LE23014AD212AA3 9239 SD1 78 91.7 1300 60 900 405T 575 SD10 Ball 1LE23014AD213AA3 9239 SD1 62.4 91.7 1300 60 720 444T 460 SD10 Roller 1LE23014CE112AA3 16035 SD1 1900 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only Stock Model *FL Amps at 460V or 575V Frames 280-440 available after RGZESD stock motors are depleted 1 CW Rotation facing opposite drive end 3-4 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC SD10 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 75 3600 365T 460 SD10 Ball 1LE23013CA212AA3 6300 SD1 85 94.1 875 75 3600 365TS 460 SD10 Ball 1LE23013DA212AA3 6300 SD1 85 94.1 875 75 3600 365TS 575 SD10 Ball 1LE23013DA213AA3 6300 SD1 68 94.1 875 75 1800 365T 460 SD10 Ball 1LE23013CB212AA3 6305 SD1 87 94.1 875 75 1800 365TS 460 SD10 Ball 1LE23013DB212AA3 6305 SD1 87 94.1 875 75 1800 365T 575 SD10 Ball 1LE23013CB213AA3 6305 SD1 69.6 94.1 875 75 1200 405T 460 SD10 Ball 1LE23014AC212AA3 7655 SD1 93 94.5 1300 75 1200 405T 575 SD10 Ball 1LE23014AC213AA3 7655 SD1 74.4 94.5 1300 75 900 444T 460 SD10 Roller 1LE23014CD112AA3 12175 SD1 94 93 1625 75 900 B444T 460 SD10 Ball 1LE23014ED112AA3 12175 SD1 94 93 1625 75 900 444TS 460 SD10 Ball 1LE23014DD112AA3 12475 SD1 94 93 1625 75 900 444T 575 SD10 Roller 1LE23014CD113AA3 12175 SD1 75.2 93 1625 75 900 B444T 575 SD10 Ball 1LE23014ED113AA3 12175 SD1 75.2 93 1625 75 900 444TS 575 SD10 Ball 1LE23014DD113AA3 12175 SD1 75.2 93 1625 75 720 445T 460 SD10 Roller 1LE23014CE212AA3 17014 SD1 1900 100 3600 405TS 460 SD10 Ball 1LE23014BA212AA3 8442 SD1 108 94.1 1300 100 3600 405TS 575 SD10 Ball 1LE23014BA213AA3 8442 SD1 86.4 94.1 1300 100 1800 405TS 460 SD10 Ball 1LE23014BB212AA3 7790 SD1 113 94.5 1300 100 1800 405T 460 SD10 Ball 1LE23014AB212AA3 7790 SD1 113 94.5 1300 100 1800 405T 575 SD10 Ball 1LE23014AB213AA3 7790 SD1 90.4 94.5 1300 100 1200 444T 460 SD10 Roller 1LE23014CC112AA3 10462 SD1 117 94.5 1740 100 1200 B444T 460 SD10 Ball 1LE23014EC112AA3 10462 SD1 117 94.5 1566 100 1200 444TS 460 SD10 Ball 1LE23014DC112AA3 10462 SD1 117 94.5 1625 100 1200 444T 575 SD10 Roller 1LE23014CC113AA3 10462 SD1 93.6 94.5 1625 100 1200 B444T 575 SD10 Ball 1LE23014EC113AA3 10462 SD1 93.6 94.5 1625 100 1200 444TS 575 SD10 Ball 1LE23014DC113AA3 40462 SD1 93.6 94.5 1625 100 900 445T 460 SD10 Roller 1LE23014CD212AA3 15053 SD1 123 94.1 1900 100 900 B445T 460 SD10 Ball 1LE23014ED212AA3 15053 SD1 123 94.1 1900 100 900 445TS 460 SD10 Ball 1LE23014DD212AA3 15053 SD1 123 94.1 1900 100 900 445T 575 SD10 Roller 1LE23014CD213AA3 15053 SD1 98.4 94.1 1900 100 900 B445T 575 SD10 Ball 1LE23014ED213AA3 15053 SD1 98.4 94.1 1900 100 900 445TS 575 SD10 Ball 1LE23014DD213AA3 15053 SD1 98.4 94.1 1900 100 720 447T 460 SD10 Roller 1LE23014CE312AA3 21107 SD1 2280 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZESD stock motors are depleted 1 CW Rotation facing opposite drive end High Efficiency Stock Model Introduction General Purpose Duty Duty Purpose DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 3-5 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC SD10 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 125 3600 444TS 460 SD10 Ball 1LE23014DA112AA3 11035 SD1 138 94.5 1552 125 3600 444TS 575 SD10 Ball 1LE23014DA113AA3 11035 SD1 110.4 94.5 1600 125 1800 444TS 460 SD10 Ball 1LE23014DB112AA3 10255 SD1 143 95 1625 125 1800 B444T 460 SD10 Ball 1LE23014EB112AA3 10255 SD1 143 95 1930 125 1800 444T 460 SD10 Roller 1LE23014CB112AA3 10255 SD1 143 95 1625 125 1800 444TS 575 SD10 Ball 1LE23014DB113AA3 10255 SD1 114.4 95 1625 125 1800 444T 575 SD10 Roller 1LE23014CB113AA3 10255 SD1 114.4 95 1625 125 1800 B444T 575 SD10 Ball 1LE23014EB113AA3 10255 SD1 114.4 95 1625 125 1200 B445T 460 SD10 Ball 1LE23014EC212AA3 12850 SD1 144 94.5 1930 125 1200 445TS 460 SD10 Ball 1LE23014DC212AA3 12850 SD1 144 94.5 1737 125 1200 445T 460 SD10 Roller 1LE23014CC212AA3 12850 SD1 144 94.5 1900 125 1200 445T 575 SD10 Roller 1LE23014CC213AA3 12850 SD1 115.2 94.5 1900 125 1200 B445T 575 SD10 Ball 1LE23014EC213AA3 12850 SD1 115.2 94.5 1900 125 1200 445TS 575 SD10 Ball 1LE23014DC213AA3 12850 SD1 115.2 94.5 1900 125 900 447T 460 SD10 Roller 1LE23014CD312AA3 16040 SD1 152 93.6 2280 125 900 B447T 460 SD10 Ball 1LE23014ED312AA3 16040 SD1 152 93.6 2280 125 900 447TS 460 SD10 Ball 1LE23014DD312AA3 16040 SD1 152 93.6 2280 125 900 447T 575 SD10 Roller 1LE23014CD313AA3 16040 SD1 121.6 93.6 2280 125 900 447TS 575 SD10 Ball 1LE23014DD313AA3 16040 SD1 121.6 93.6 2280 125 900 B447T 575 SD10 Ball 1LE23014ED313AA3 16040 SD1 121.6 93.6 2280 125 720 449T 460 SD10 Roller 1LE23014CE512AA3 23907 SD1 2600 150 3600 445TS 460 SD10 Ball 1LE23014DA212AA3 13257 SD1 164 95 1900 150 3600 445TS 575 SD10 Ball 1LE23014DA213AA3 13257 SD1 131.2 95 1700 150 1800 445TS 460 SD10 Ball 1LE23014DB212AA3 11922 SD1 170 95.8 1900 150 1800 B445T 460 SD10 Ball 1LE23014EB212AA3 11922 SD1 170 95.8 1930 150 1800 445T 460 SD10 Roller 1LE23014CB212AA3 11922 SD1 170 95.8 1900 150 1800 445TS 575 SD10 Ball 1LE23014DB213AA3 11922 SD1 136 95.8 1900 150 1800 445T 575 SD10 Roller 1LE23014CB213AA3 11922 SD1 136 95.8 1900 150 1800 B445T 575 SD10 Ball 1LE23014EB213AA3 11922 SD1 136 95.8 1900 150 1200 447T 460 SD10 Roller 1LE23014CC312AA3 14377 SD1 170 95 2280 150 1200 B447T 460 SD10 Ball 1LE23014EC312AA3 14377 SD1 170 95 2415 150 1200 447TS 460 SD10 Ball 1LE23014DC312AA3 14377 SD1 170 95 2174 150 1200 447T 575 SD10 Roller 1LE23014CC313AA3 14377 SD1 136 95 2280 150 1200 B447T 575 SD10 Ball 1LE23014EC313AA3 14377 SD1 136 95 2280 150 1200 447TS 575 SD10 Ball 1LE23014DC313AA3 14377 SD1 136 95 2280 150 900 447T 460 SD10 Roller 1LE23014CD412AA3 20400 SD1 186 94.1 2280 150 900 B447T 460 SD10 Ball 1LE23014ED412AA3 20400 SD1 186 94.1 2280 150 900 447TS 460 SD10 Ball 1LE23014DD412AA3 20400 SD1 186 94.1 2280 150 900 447T 575 SD10 Roller 1LE23014CD413AA3 20400 SD1 148.8 94.1 2280 150 900 B447T 575 SD10 Ball 1LE23014ED413AA3 20400 SD1 148.8 94.1 2280 150 900 447TS 575 SD10 Ball 1LE23014DD413AA3 20400 SD1 148.8 94.1 2280 150 720 449T 460 SD10 Roller 1LE23014CE612AA3 25655 SD1 2600 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only Stock Model *FL Amps at 460V or 575V Frames 280-440 available after RGZESD stock motors are depleted 1 CW Rotation facing opposite drive end 3-6 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC SD10 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 200 3600 447TS 460 SD10 Ball 1LE23014DA312AA3 16770 SD1 216 95 2280 200 3600 447TS 575 SD10 Ball 1LE23014DA313AA3 16770 SD1 172.8 95 2000 200 1800 B447T 460 SD10 Ball 1LE23014EB312AA3 14501 SD1 225 95.8 2015 200 1800 447TS 460 SD10 Ball 1LE23014DB312AA3 14501 SD1 225 95.8 2280 200 1800 447T 460 SD10 Roller 1LE23014CB312AA3 14501 SD1 225 95.8 2149 200 1800 447TS 575 SD10 Ball 1LE23014DB313AA3 14501 SD1 180 95.8 2280 200 1800 447T 575 SD10 Roller 1LE23014CB313AA3 14501 SD1 180 95.8 2280 200 1800 B447T 575 SD10 Ball 1LE23014EB313AA3 14501 SD1 180 95.8 2280 200 1200 449T 460 SD10 Roller 1LE23014CC512AA3 17600 SD1 226 95 2600 200 1200 B449T 460 SD10 Ball 1LE23014EC512AA3 17600 SD1 226 95 2625 200 1200 449TS 460 SD10 Ball 1LE23014DC512AA3 17600 SD1 226 95 2363 200 1200 449T 575 SD10 Roller 1LE23014CC513AA3 17600 SD1 180.8 95 2600 200 1200 B449T 575 SD10 Ball 1LE23014EC513AA3 17600 SD1 180.8 95 2600 200 1200 449TS 575 SD10 Ball 1LE23014DC513AA3 17600 SD1 180.8 95 2600 200 900 449T 460 SD10 Roller 1LE23014CD612AA3 20700 SD1 241 94.5 2600 200 900 B449T 460 SD10 Ball 1LE23014ED612AA3 20700 SD1 241 94.5 2600 200 900 449TS 460 SD10 Ball 1LE23014DD612AA3 20700 SD1 241 94.5 2600 200 900 449T 575 SD10 Roller 1LE23014CD613AA3 20700 SD1 192.8 94.5 2600 200 900 B449T 575 SD10 Ball 1LE23014ED613AA3 20700 SD1 192.8 94.5 2600 200 900 449TS 575 SD10 Ball 1LE23014DD613AA3 20700 SD1 192.8 94.5 2600 250 3600 449TS 460 SD10 Ball 1LE23014DA512AA3 21150 SD1 267 95.4 2600 250 3600 449TS 575 SD10 Ball 1LE23014DA513AA3 21150 SD1 267 95.4 2600 250 1800 449TS 460 SD10 Ball 1LE23014DB512AA3 18192 SD1 281 95.8 2600 250 1800 B449T 460 SD10 Ball 1LE23014EB512AA3 18192 SD1 281 95.8 2625 250 1800 449T 460 SD10 Roller 1LE23014CB512AA3 18192 SD1 281 95.8 2482 250 1800 449T 575 SD10 Roller 1LE23014CB513AA3 18192 SD1 224.7 95.8 2482 250 1800 B449T 575 SD10 Ball 1LE23014EB513AA3 18192 SD1 224.7 95.8 2482 250 1800 449TS 575 SD10 Ball 1LE23014DB513AA3 18192 SD1 224.7 95.8 2482 250 1200 B449T 460 SD10 Ball 1LE23014EC612AA3 19152 SD1 280 95 2625 250 1200 449TS 460 SD10 Ball 1LE23014DC612AA3 19152 SD1 280 95 2070 250 1200 449T 460 SD10 Roller 1LE23014CC612AA3 19152 SD1 280 95 2600 250 1200 449T 575 SD10 Roller 1LE23014CC613AA3 19152 SD1 224 95 2600 250 1200 B449T 575 SD10 Ball 1LE23014EC613AA3 19152 SD1 224 95 2600 250 1200 449TS 575 SD10 Ball 1LE23014DC613AA3 19152 SD1 224 95 2600 250 900 S449LS 460 SD10 Roller 1LE23014FD212AA3 29500 SD1 303 94.5 3316 250 900 S449LS 575 SD10 Ball 1LE23014FD213AA3 29500 SD1 303 94.5 3316 300 3600 449TS 460 SD10 Ball 1LE23014DA612AA3 26319 SD1 323 95.8 2600 300 3600 449TS 575 SD10 Ball 1LE23014DA613AA3 26319 SD1 258.4 95.8 2600 300 1800 449TS 460 SD10 Ball 1LE23014DB612AA3 19288 SD1 346 95.4 2352 300 1800 449T 460 SD10 Roller 1LE23014CB612AA3 19288 SD1 346 95.4 2600 300 1800 B449T 460 SD10 Ball 1LE23014EB612AA3 19288 SD1 346 95.4 2625 300 1800 449T 575 SD10 Ball 1LE23014CB613AA3 19288 SD1 276.8 95.4 2600 300 1800 B449T 575 SD10 Ball 1LE23014EB613AA3 19288 SD1 276.8 95.4 2600 300 1800 449TS 575 SD10 Ball 1LE23014DB613AA3 19288 SD1 276.8 95.4 2600 300 1200 S449LS 460 SD10 Roller 1LE23014FC112AA3 35702 SD1 336 95.8 3442 300 1200 S449LS 575 SD10 Ball 1LE23014FC113AA3 34702 SD1 272 95.8 3442 DOE#CC032A High Efficiency 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-7 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC SD10 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 350 3600 S449SS 460 SD10 Ball 1 1LE23014GA112AA3 33060 SD1 369 95.4 3063 350 3600 S449SS 575 SD10 Ball 1LE23014GA113AA3 33060 SD1 295.2 95.4 3063 350 1800 S449SS 460 SD10 Ball 1LE23014GB212AA3 30612 SD1 390 95.8 3309 350 1800 S449LS 460 SD10 Roller 1LE23014FB212AA3 30612 SD1 390 95.8 3346 350 1800 S449LS 575 SD10 Ball 1LE23014FB213AA3 30612 SD1 312 95.8 3346 350 1200 S449LS 460 SD10 Roller 1LE23014FC312AA3 40642 SD1 395 95 3000 350 1200 S449LS 575 SD10 Ball 1LE23014FC313AA3 40642 SD1 316 95 3000 400 3600 S449SS 460 SD10 Ball 1 1LE23014GA312AA3 37105 SD1 418 95.4 3217 400 3600 S449SS 575 SD10 Ball 1LE23014GA313AA3 37105 SD1 95.4 3217 400 1800 S449SS 460 SD10 Ball 1LE23014GB312AA3 34365 SD1 449 95.8 3869 400 1800 S449LS 460 SD10 Roller 1LE23014FB312AA3 34365 SD1 449 95.8 3388 400 1800 S449LS 575 SD10 Ball 1LE23014FB313AA3 34365 SD1 95.8 3388 400 1200**S449LS 460 SD10 Roller 1LE23014FC412AA3 43080 SD1 455 94.5 3050 400 1200**S449LS 575 SD10 Ball 1LE23014FC413AA3 43080 SD1 94.5 3050 C-Face, Horizontal, Footless High Efficiency 1 3600 143TC 208-230/460 SD10 Ball 1LE23011AA114GA3 417 SD1 1.4 80 65 1 3600 143TC 575 SD10 Ball 1LE23011AA113GA3 417 SD1 1.12 80 65 1 1800 143TC 208-230/460 SD10 Ball 1LE23011AB214GA3 403 SD1 1.5 82.5 67 1 1800 143TC 575 SD10 Ball 1LE23011AB213GA3 403 SD1 1.2 82.5 67 1 1200 145TC 208-230/460 SD10 Ball 1LE23011AC314GA3 485 SD1 1.6 80 67 1 1200 145TC 575 SD10 Ball 1LE23011AC313GA3 485 SD1 1.28 80 67 1 900 182TC 208-230/460 SD10 Ball 1LE23011CD114GA3 754 SD1 2.1 74 106 1 900 182TC 575 SD10 Ball 1LE23011CD113GA3 754 SD1 1.64 74 106 1.5 3600 143TC 208-230/460 SD10 Ball 1LE23011AA214GA3 422 SD1 2 82.5 66 1.5 3600 143TC 575 SD10 Ball 1LE23011AA213GA3 422 SD1 1.6 82.5 66 1.5 1800 145TC 208-230/460 SD10 Ball 1LE23011AB314GA3 440 SD1 2.2 84 71 1.5 1800 145TC 575 SD10 Ball 1LE23011AB313GA3 440 SD1 1.76 84 71 1.5 1200 182TC 208-230/460 SD10 Ball 1LE23011CC114GA3 563 SD1 2.4 85.5 103 1.5 1200 182TC 575 SD10 Ball 1LE23011CC113GA3 563 SD1 1.92 85.5 103 1.5 900 184TC 208-230/460 SD10 Ball 1LE23011CD314GA3 836 SD1 3 77 119 1.5 900 184TC 575 SD10 Ball 1LE23011CD313GA3 836 SD1 2.4 77 119 2 3600 145TC 208-230/460 SD10 Ball 1LE23011AA314GA3 489 SD1 2.6 84 68 2 3600 145TC 575 SD10 Ball 1LE23011AA313GA3 489 SD1 2.08 84 68 2 1800 145TC 208-230/460 SD10 Ball 1LE23011AB414GA3 475 SD1 3 84 73 2 1800 145TC 575 SD10 Ball 1LE23011AB413GA3 475 SD1 2.4 84 73 2 1200 184TC 208-230/460 SD10 Ball 1LE23011CC314GA3 616 SD1 3.1 86.5 114 2 1200 184TC 575 SD10 Ball 1LE23011CC313GA3 616 SD1 2.48 86.5 114 2 900 213TC 208-230/460 SD10 Ball 1LE23012AD114GA3 955 SD1 3.3 82.5 143 2 900 213TC 575 SD10 Ball 1LE23012AD113GA3 955 SD1 2.64 82.5 143 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V **Available only with Service Factor 1.0 and NEMA design A. Frames 280-440 available after RGZESD stock motors are depleted 1 CW Rotation facing opposite drive end Stock Model 3-8 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC SD10 HP RPM Frame Voltage Type C-Face, Horizontal, Footless - continued DE Bearing List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 3 3600 182TC 208-230/460 SD10 Ball 1LE23011CA114GA3 573 SD1 3.7 85.5 105 3 3600 182TC 575 SD10 Ball 1LE23011CA113GA3 573 SD1 2.96 85.5 105 3 1800 182TC 208-230/460 SD10 Ball 1LE23011CB114GA3 556 SD1 4 87.5 108 3 1800 182TC 575 SD10 Ball 1LE23011CB113GA3 556 SD1 3.2 87.5 108 3 1200 213TC 208-230/460 SD10 Ball 1LE23012AC114GA3 739 SD1 4 87.5 145 3 1200 213TC 575 SD10 Ball 1LE23012AC113GA3 739 SD1 3.36 87.5 145 3 900 215TC 208-230/460 SD10 Ball 1LE23012AD214GA3 1279 SD1 4.8 84 158 3 900 215TC 575 SD10 Ball 1LE23012AD213GA3 1279 SD1 3.84 84 158 5 3600 184TC 208-230/460 SD10 Ball 1LE23011CA314GA3 694 SD1 6.2 87.5 111 5 3600 184TC 575 SD10 Ball 1LE23011CA313GA3 694 SD1 4.96 87.5 111 5 1800 184TC 208-230/460 SD10 Ball 1LE23011CB314GA3 630 SD1 6.7 87.5 114 5 1800 184TC 575 SD10 Ball 1LE23011CB313GA3 630 SD1 5.36 87.5 114 5 1200 215TC 208-230/460 SD10 Ball 1LE23012AC214GA3 1016 SD1 6.8 87.5 160 5 1200 215TC 575 SD10 Ball 1LE23012AC213GA3 1016 SD1 5.44 87.5 160 5 900 254TC 208-230/460 SD10 Ball 1LE23012BD114GA3 1794 SD1 8.8 85.5 247 5 900 254TC 575 SD10 Ball 1LE23012BD113GA3 1794 SD1 7.04 85.5 247 7.5 3600 213TC 208-230/460 SD10 Ball 1LE23012AA114GA3 835 SD1 9 88.5 156 7.5 3600 213TC 575 SD10 Ball 1LE23012AA113GA3 835 SD1 7.2 88.5 156 7.5 1800 213TC 208-230/460 SD10 Ball 1LE23012AB114GA3 825 SD1 9.5 89.5 163 7.5 1800 213TC 575 SD10 Ball 1LE23012AB113GA3 825 SD1 7.6 89.5 163 7.5 1200 254TC 208-230/460 SD10 Ball 1LE23012BC114GA3 1356 SD1 10.5 89.5 253 7.5 1200 254TC 575 SD10 Ball 1LE23012BC113GA3 1356 SD1 8.4 89.5 253 7.5 900 256TC 208-230/460 SD10 Ball 1LE23012BD214GA3 2013 SD1 13 85.5 279 7.5 900 256TC 575 SD10 Ball 1LE23012BD213GA3 2013 SD1 10.4 85.5 279 10 3600 215TC 208-230/460 SD10 Ball 1LE23012AA214GA3 962 SD1 11.5 89.5 170 10 3600 215TC 575 SD10 Ball 1LE23012AA213GA3 962 SD1 9.2 89.5 170 10 1800 215TC 208-230/460 SD10 Ball 1LE23012AB214GA3 976 SD1 12.5 89.5 170 10 1800 215TC 575 SD10 Ball 1LE23012AB213GA3 976 SD1 10 89.5 170 10 1200 256TC 208-230/460 SD10 Ball 1LE23012BC214GA3 1610 SD1 13.5 89.5 265 10 1200 256TC 575 SD10 Ball 1LE23012BC213GA3 1610 SD1 10.8 89.5 265 15 3600 254TC 208-230/460 SD10 Ball 1LE23012BA114GA3 1319 SD1 18 90.2 257 15 3600 254TC 575 SD10 Ball 1LE23012BA113GA3 1319 SD1 14.4 90.2 257 15 1800 254TC 208-230/460 SD10 Ball 1LE23012BB114GA3 1296 SD1 19 91 256 15 1800 254TC 575 SD10 Ball 1LE23012BB113GA3 1296 SD1 15.2 91 256 20 3600 256TC 208-230/460 SD10 Ball 1LE23012BA214GA3 1601 SD1 23.5 90.2 275 20 3600 256TC 575 SD10 Ball 1LE23012BA213GA3 1601 SD1 18.8 90.2 275 20 1800 256TC 208-230/460 SD10 Ball 1LE23012BB214GA3 1567 SD1 25 91 275 20 1800 256TC 575 SD10 Ball 1LE23012BB213GA3 1567 SD1 20 91 275 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZESD stock motors are depleted 1 CW Rotation facing opposite drive end DOE#CC032A High Efficiency 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-9 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty - TEFC RGZESD RGZESD motors are ideal for both indoor and outdoor applications and in operating atmospheres that contain moisture, dust and grit. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other general purpose applications. Specifications 25 to 400 HP 1.15 service factor, 40ºC ambient 3600, 1800, 1200 or 900 RPM 3-phase, 60 Hz; 230/460 volt operation under 100 HP, 460 volt 100 HP and above, 575 volt available Meets or exceeds EPAct efficiency standards Class F insulation, Class B temperature rise NEMA design B, continuous duty 284T through 449T frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation T-drains provided. Lifting eyebolts are included for frames > 75 lbs. Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary inverter rated NEMA Class F non-hygroscopic insulation system with Class B temperature rise, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges This insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with adjustable speed drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes Bearings Regreasable, oversized single shielded with cast iron inner caps. Alemite grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance. For added bearing protection, a drive end shaft V-ring slinger is provided. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. A ground lug is included. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Dimensions Purpose 3-10 2009-2010 Low Voltage AC Selection and Pricing Guide

- TEFC RGZESD HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 10 900 284T 230/460 RGZESD Ball 1LE29512CD116AA3 2557 SA-7XSD 15 91 375 10 900 284T 575 RGZESD Ball 1LE29512CD113AA3 2557 SA-7XSD 12 91 375 15 1200 284T 230/460 RGZESD Ball 1LE29512CC116AA3 2096 SA-7XSD 20 91 375 15 1200 284T 575 RGZESD Ball 1LE29512CC113AA3 2096 SA-7XSD 16 91 375 15 900 286T 230/460 RGZESD Ball 1LE29512CD216AA3 3328 SA-7XSD 23 91 430 15 900 286T 575 RGZESD Ball 1LE29512CD213AA3 3328 SA-7XSD 18.4 91 430 20 1200 286T 230/460 RGZESD Ball 1LE29512CC216AA3 2554 SA-7XSD 26 91.7 430 20 1200 286T 575 RGZESD Ball 1LE29512CC213AA3 2554 SA-7XSD 20.8 91.7 430 20 900 324T 230/460 RGZESD Ball 1LE29513AD116AA3 4068 SA-7XSD 31 91 567 20 900 324T 575 RGZESD Ball 1LE29513AD113AA3 4068 SA-7XSD 24.8 91 567 25 3600 284T 460 RGZESD Ball 1LE29512CA112AA3 1914 SA-7XSD 29 91.7 375 25 3600 284TS 460 RGZESD Ball 1LE29512DA112AA3 1914 SA-7XSD 29 91.7 375 25 3600 284TS 575 RGZESD Ball 1LE29512DA113AA3 1914 SA-7XSD 23.2 91.7 375 25 1800 284T 460 RGZESD Ball 1LE29512CB112AA3 1828 SA-7XSD 29 93 477 25 1800 284TS 460 RGZESD Ball 1LE29512DB112AA3 1828 SA-7XSD 29 93 375 25 1800 284T 575 RGZESD Ball 1LE29512CB113AA3 1828 SA-7XSD 23.2 93 375 25 1200 324T 460 RGZESD Ball 1LE29513AC112AA3 3096 SA-7XSD 33 92.4 565 25 1200 324T 575 RGZESD Ball 1LE29513AC113AA3 3096 SA-7XSD 26.4 92.4 565 25 900 326T 460 RGZESD Ball 1LE29513AD212AA3 4730 SA-7XSD 38 90.2 600 25 900 326T 575 RGZESD Ball 1LE29513AD213AA3 4730 SA-7XSD 30.4 90.2 600 30 3600 286T 460 RGZESD Ball 1LE29512CA212AA3 2235 SA-7XSD 34 91.7 520 30 3600 286TS 460 RGZESD Ball 1LE29512DA212AA3 2235 SA-7XSD 34 91.7 465 30 3600 286TS 575 RGZESD Ball 1LE29512DA213AA3 2235 SA-7XSD 27.2 91.7 430 30 1800 286T 460 RGZESD Ball 1LE29512CB212AA3 2125 SA-7XSD 35 93 494 30 1800 286TS 460 RGZESD Ball 1LE29512DB212AA3 2125 SA-7XSD 35 93 494 30 1800 286T 575 RGZESD Ball 1LE29512CB213AA3 2125 SA-7XSD 28 93 430 30 1200 326T 460 RGZESD Ball 1LE29513AC212AA3 3566 SA-7XSD 39 92.4 669 30 1200 326T 575 RGZESD Ball 1LE29513AC213AA3 3566 SA-7XSD 31.2 92.4 600 30 900 364T 460 RGZESD Ball 1LE29513CD112AA3 5598 SA-7XSD 47 91 800 30 900 364T 575 RGZESD Ball 1LE29513CD113AA3 5598 SA-7XSD 37.6 91 800 40 3600 324T 460 RGZESD Ball 1LE29513AA112AA3 2948 SA-7XSD 45 93.6 565 40 3600 324TS 460 RGZESD Ball 1LE29513BA112AA3 2948 SA-7XSD 45 93.6 565 40 3600 324TS 575 RGZESD Ball 1LE29513BA113AA3 2948 SA-7XSD 36 93.6 565 40 1800 324T 460 RGZESD Ball 1LE29513AB112AA3 2823 SA-7XSD 47 93.6 565 40 1800 324TS 460 RGZESD Ball 1LE29513BB112AA3 2823 SA-7XSD 47 93.6 565 40 1800 324T 575 RGZESD Ball 1LE29513AB113AA3 2823 SA-7XSD 37.6 93.6 565 40 1200 364T 460 RGZESD Ball 1LE29513CC112AA3 4833 SA-7XSD 52 93.6 800 40 1200 364T 575 RGZESD Ball 1LE29513CC113AA3 4833 SA-7XSD 41.6 93.6 800 40 900 365T 460 RGZESD Ball 1LE29513CD212AA3 6769 SA-7XSD 63 91.7 875 40 900 365T 575 RGZESD Ball 1LE29513CD213AA3 6769 SA-7XSD 50.4 91.7 875 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZESD motors will be discontinued when present stock is depleted DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 3-11 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC RGZESD HP RPM Frame Voltage Type DE Bearing 3-12 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 50 3600 326T 460 RGZESD Ball 1LE29513AA212AA3 3814 SA-7XSD 55 93.6 710 50 3600 326TS 460 RGZESD Ball 1LE29513BA212AA3 3814 SA-7XSD 55 93.6 710 50 3600 326TS 575 RGZESD Ball 1LE29513BA213AA3 3814 SA-7XSD 44 93.6 600 50 1800 326T 460 RGZESD Ball 1LE29513AB212AA3 3467 SA-7XSD 58 93.6 600 50 1800 326TS 460 RGZESD Ball 1LE29513BB212AA3 3467 SA-7XSD 58 93.6 639 50 1800 326T 575 RGZESD Ball 1LE29513AB213AA3 3467 SA-7XSD 46.4 93.6 600 50 1200 365T 460 RGZESD Ball 1LE29513CC212AA3 5549 SA-7XSD 66 93.6 875 50 1200 365T 575 RGZESD Ball 1LE29513CC213AA3 5549 SA-7XSD 52.8 93.6 875 50 900 404T 460 RGZESD Ball 1LE29514AD112AA3 8088 SA-7XSD 67 91.7 1135 50 900 404T 575 RGZESD Ball 1LE29514AD113AA3 8088 SA-7XSD 53.6 91.7 1135 60 3600 364T 460 RGZESD Ball 1LE29513CA112AA3 5017 SA-7XSD 68 93.6 800 60 3600 364TS 460 RGZESD Ball 1LE29513DA112AA3 5017 SA-7XSD 68 93.6 800 60 3600 364TS 575 RGZESD Ball 1LE29513DA113AA3 5017 SA-7XSD 54.4 93.6 800 60 1800 364T 460 RGZESD Ball 1LE29513CB112AA3 4974 SA-7XSD 71 93.6 831 60 1800 364TS 460 RGZESD Ball 1LE29513DB112AA3 4974 SA-7XSD 71 93.6 800 60 1800 364T 575 RGZESD Ball 1LE29513CB113AA3 4974 SA-7XSD 56.8 93.6 800 60 1200 404T 460 RGZESD Ball 1LE29514AC112AA3 6502 SA-7XSD 74 94.1 1135 60 1200 404T 575 RGZESD Ball 1LE29514AC113AA3 6502 SA-7XSD 59.2 94.1 1135 60 900 405T 460 RGZESD Ball 1LE29514AD212AA3 9239 SA-7XSD 78 91.7 1300 60 900 405T 575 RGZESD Ball 1LE29514AD213AA3 9239 SA-7XSD 62.4 91.7 1300 60 720 444T 460 RGZESD Roller 1LE29514CE112AA3 16035 SA-7XSD 1900 75 3600 365T 460 RGZESD Ball 1LE29513CA212AA3 6300 SA-7XSD 85 94.1 875 75 3600 365TS 460 RGZESD Ball 1LE29513DA212AA3 6300 SA-7XSD 85 94.1 875 75 3600 365TS 575 RGZESD Ball 1LE29513DA213AA3 6300 SA-7XSD 68 94.1 875 75 1800 365T 460 RGZESD Ball 1LE29513CB212AA3 6305 SA-7XSD 87 94.1 875 75 1800 365TS 460 RGZESD Ball 1LE29513DB212AA3 6305 SA-7XSD 87 94.1 875 75 1800 365T 575 RGZESD Ball 1LE29513CB213AA3 6305 SA-7XSD 69.6 94.1 875 75 1200 405T 460 RGZESD Ball 1LE29514AC212AA3 7655 SA-7XSD 93 94.5 1300 75 1200 405T 575 RGZESD Ball 1LE29514AC213AA3 7655 SA-7XSD 74.4 94.5 1300 75 900 444T 460 RGZESD Roller 1LE29514CD112AA3 12175 SA-7XSD 94 93 1625 75 900 444T 575 RGZESD Roller 1LE29514CD113AA3 12175 SA-7XSD 75.2 93 1625 75 720 445T 460 RGZESD Roller 1LE29514CE212AA3 17014 SA-7XSD 1900 100 3600 405TS 460 RGZESD Ball 1LE29514BA212AA3 8442 SA-7XSD 108 94.1 1300 100 3600 405TS 575 RGZESD Ball 1LE29514BA213AA3 8442 SA-7XSD 86.4 94.1 1300 100 1800 405TS 460 RGZESD Ball 1LE29514BB212AA3 7790 SA-7XSD 113 94.5 1300 100 1800 405T 460 RGZESD Ball 1LE29514AB212AA3 7790 SA-7XSD 113 94.5 1300 100 1800 405T 575 RGZESD Ball 1LE29514AB213AA3 7790 SA-7XSD 90.4 94.5 1300 100 1200 B444T 460 RGZESD Ball 1LE29514EC112AA3 10462 SA-7XSD 117 94.5 1740 100 1200 444TS 460 RGZESD Ball 1LE29514DC112AA3 10462 SA-7XSD 117 94.5 1566 100 1200 444T 460 RGZESD Roller 1LE29514CC112AA3 10462 SA-7XSD 117 94.5 1625 100 1200 444T 575 RGZESD Roller 1LE29514CC113AA3 10462 SA-7XSD 93.6 94.5 1625 100 900 445T 460 RGZESD Roller 1LE29514CD212AA3 15053 SA-7XSD 123 94.1 1900 100 900 445T 575 RGZESD Roller 1LE29514CD213AA3 15053 SA-7XSD 98.4 94.1 1900 100 720 447T 460 RGZESD Roller 1LE29514CE312AA3 21107 SA-7XSD 2280 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZESD motors will be discontinued when present stock is depleted Stock Model DOE#CC032A

- TEFC RGZESD HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 125 3600 444TS 460 RGZESD Ball 1LE29514DA112AA3 11035 SA-7XSD 138 94.5 1552 125 3600 444TS 575 RGZESD Ball 1LE29514DA113AA3 11035 SA-7XSD 110.4 94.5 1600 125 1800 444TS 460 RGZESD Ball 1LE29514DB112AA3 10255 SA-7XSD 143 95 1625 125 1800 B444T 460 RGZESD Ball 1LE29514EB112AA3 10255 SA-7XSD 143 95 1930 125 1800 444T 460 RGZESD Roller 1LE29514CB112AA3 10255 SA-7XSD 143 95 1625 125 1800 444TS 575 RGZESD Ball 1LE29514DB113AA3 10255 SA-7XSD 114.4 95 1625 125 1800 444T 575 RGZESD Roller 1LE29514CB113AA3 10255 SA-7XSD 114.4 95 1625 125 1200 B445T 460 RGZESD Ball 1LE29514EC212AA3 12850 SA-7XSD 144 94.5 1930 125 1200 445TS 460 RGZESD Ball 1LE29514DC212AA3 12850 SA-7XSD 144 94.5 1737 125 1200 445T 460 RGZESD Roller 1LE29514CC212AA3 12850 SA-7XSD 144 94.5 1900 125 1200 445T 575 RGZESD Roller 1LE29514CC213AA3 12850 SA-7XSD 115.2 94.5 1900 125 900 447T 460 RGZESD Roller 1LE29514CD312AA3 16040 SA-7XSD 152 93.6 2280 125 900 447T 575 RGZESD Roller 1LE29514CD313AA3 16040 SA-7XSD 121.6 93.6 2280 125 720 449T 460 RGZESD Roller 1LE29514CE512AA3 23907 SA-7XSD 2600 150 3600 445TS 460 RGZESD Ball 1LE29514DA212AA3 13257 SA-7XSD 164 95 1900 150 3600 445TS 575 RGZESD Ball 1LE29514DA213AA3 13257 SA-7XSD 131.2 95 1700 150 1800 445TS 460 RGZESD Ball 1LE29514DB212AA3 11922 SA-7XSD 170 95.8 1900 150 1800 B445T 460 RGZESD Ball 1LE29514EB212AA3 11922 SA-7XSD 170 95.8 1930 150 1800 445T 460 RGZESD Roller 1LE29514CB212AA3 11922 SA-7XSD 170 95.8 1900 150 1800 445TS 575 RGZESD Ball 1LE29514DB213AA3 11922 SA-7XSD 136 95.8 1900 150 1800 445T 575 RGZESD Roller 1LE29514CB213AA3 11922 SA-7XSD 136 95.8 1900 150 1200 B447T 460 RGZESD Ball 1LE29514EC312AA3 14377 SA-7XSD 170 95 2415 150 1200 447TS 460 RGZESD Ball 1LE29514DC312AA3 14377 SA-7XSD 170 95 2174 150 1200 447T 460 RGZESD Roller 1LE29514CC312AA3 14377 SA-7XSD 170 95 2280 150 1200 447T 575 RGZESD Roller 1LE29514CC313AA3 14377 SA-7XSD 136 95 2280 150 900 447T 460 RGZESD Roller 1LE29514CD412AA3 20400 SA-7XSD 186 94.1 2280 150 900 447T 575 RGZESD Roller 1LE29514CD413AA3 20400 SA-7XSD 148.8 94.1 2280 150 720 449T 460 RGZESD Roller 1LE29514CE612AA3 25655 SA-7XSD 2600 200 3600 447TS 460 RGZESD Ball 1LE29514DA312AA3 16770 SA-7XSD 216 95 2280 200 3600 447TS 575 RGZESD Ball 1LE29514DA313AA3 16770 SA-7XSD 172.8 95 2000 200 1800 B447T 460 RGZESD Ball 1LE29514EB312AA3 14501 SA-7XSD 225 95.8 2015 200 1800 447TS 460 RGZESD Ball 1LE29514DB312AA3 14501 SA-7XSD 225 95.8 2280 200 1800 447T 460 RGZESD Roller 1LE29514CB312AA3 14501 SA-7XSD 225 95.8 2149 200 1800 447TS 575 RGZESD Ball 1LE29514DB313AA3 14501 SA-7XSD 180 95.8 2280 200 1800 447T 575 RGZESD Roller 1LE29514CB313AA3 14501 SA-7XSD 180 95.8 2280 200 1200 B449T 460 RGZESD Ball 1LE29514EC512AA3 17600 SA-7XSD 226 95 2625 200 1200 449TS 460 RGZESD Ball 1LE29514DC512AA3 17600 SA-7XSD 226 95 2363 200 1200 449T 460 RGZESD Roller 1LE29514CC512AA3 17600 SA-7XSD 226 95 2600 200 1200 449T 575 RGZESD Roller 1LE29514CC513AA3 17600 SA-7XSD 180.8 95 2600 200 900 449T 460 RGZESD Roller 1LE29514CD612AA3 20700 SA-7XSD 241 94.5 2600 200 900 449T 575 RGZESD Roller 1LE29514CD613AA3 20700 SA-7XSD 192.8 94.5 2600 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZESD motors will be discontinued when present stock is depleted DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 3-13 Dimensions

- TEFC RGZESD HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. FL Amps High Efficiency FL Nom. Eff. (%) Weight (lbs) 250 3600 449TS 460 RGZESD Ball 1LE29514DA512AA3 21150 SA-7XSD 267 95.4 2600 250 1800 449TS 460 RGZESD Ball 1LE29514DB512AA3 18192 SA-7XSD 281 95.8 2600 250 1800 B449T 460 RGZESD Ball 1LE29514EB512AA3 18192 SA-7XSD 281 95.8 2625 250 1800 449T 460 RGZESD Roller 1LE29514CB512AA3 18192 SA-7XSD 281 95.8 2482 250 1800 449T 575 RGZESD Roller 1LE29514CB513AA3 18192 SA-7XSD 224.7 95.8 2482 250 1200 B449T 460 RGZESD Ball 1LE29514EC612AA3 19152 SA-7XSD 280 95 2625 250 1200 449TS 460 RGZESD Ball 1LE29514DC612AA3 19152 SA-7XSD 280 95 2070 250 1200 449T 460 RGZESD Roller 1LE29514CC612AA3 19152 SA-7XSD 280 95 2600 250 1200 449T 575 RGZESD Roller 1LE29514CC613AA3 19152 SA-7XSD 224 95 2600 250 900 S449LS 460 RGZESD Roller 1LE29514FD212AA3 29500 SA-7XSD 303 94.5 3316 300 3600 449TS 460 RGZESD Ball 1LE29514DA612AA3 26319 SA-7XSD 323 95.8 2600 300 1800 449TS 460 RGZESD Ball 1LE29514DB612AA3 19288 SA-7XSD 346 95.4 2352 300 1800 449T 460 RGZESD Roller 1LE29514CB612AA3 19288 SA-7XSD 346 95.4 2600 300 1800 B449T 460 RGZESD Ball 1LE29514EB612AA3 19288 SA-7XSD 346 95.4 2625 300 1200 S449LS 460 RGZESD Roller 1LE29514FC112AA3 35702 SA-7XSD 336 95 3442 350 3600 S449SS 460 RGZESD Ball 1LE29514GA112AA3 33060 SA-7XSD 369 95.4 3063 350 1800 S449SS 460 RGZESD Ball 1LE29514GB212AA3 30612 SA-7XSD 390 95.8 3309 350 1800 S449LS 460 RGZESD Roller 1LE29514FB212AA3 30612 SA-7XSD 390 95.8 3346 350 1200 S449LS 460 RGZESD Roller 1LE29514FC312AA3 40642 SA-7XSD 395 95 3000 400 3600 S449SS 460 RGZESD Ball 1LE29514GA312AA3 37105 SA-7XSD 418 95.4 3217 400 1800 S449SS 460 RGZESD Ball 1LE29514GB312AA3 34365 SA-7XSD 449 95.8 3869 400 1800 S449LS 460 RGZESD Roller 1LE29514FB312AA3 34365 SA-7XSD 449 95.8 3388 400 1200 S449LS 460 RGZESD Roller 1LE29514FC412AA3 43080 SA-7XSD 455 94.5 3050 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZESD motors will be discontinued when present stock is depleted Stock Model Dimensions Introduction General Purpose Duty Duty Purpose 3-14 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC Multi-Speed SD10 MS - 1 Winding Variable Torque SD10 MS high efficiency, severe duty, multi-speed motors are ideal for both indoor and outdoor applications and in severe duty operating atmospheres, such as cooling towers, which require more than one base speed. They meet or exceed NEMA and CSA standards and the operational standards for severe operating environments. Specifications 1 to 250 HP 1.15 service factor, 40ºC ambient 1 winding, 1800/900 RPM, variable torque 3 phase, 60 Hz; 460 volt; 200, 230 & 575 volt available Meets or exceeds NEMA efficiency standards Class F insulation, Class B temperature rise NEMA design B, continuous duty 143T through 449T frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity and corrosion resistance. Condensation T-drains provided. Lifting eyebolts are included for frames > 75 lbs. Rotor A unique rotor bar design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary NEMA Class F non-hygroscopic insulation system with Class B temperature rise, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes Bearings Regreasable, oversized single shielded with cast iron inner caps. Alemite grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance. For added bearing protection, 143T-256T frames have a drive end shaft seal and 284T-449T frames have a drive end shaft V-ring slinger. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. A ground lug is provided. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 3-15 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC Multi-Speed SD10 MS - 1 Winding Variable Torque HP Continuous High Low RPM Frame Voltage Type 3-16 2009-2010 Low Voltage AC Selection and Pricing Guide DE Bearing High Efficiency List Price $ 1 0.25 1800/900 143T 460 SD10 MS Ball 1LE23011AM240AA3 521 SD4 1.5 0.37 1800/900 145T 460 SD10 MS Ball 1LE23011AM340AA3 559 SD4 2 0.5 1800/900 182T 460 SD10 MS Ball 1LE23011CM140AA3 641 SD4 3 0.75 1800/900 184T 460 SD10 MS Ball 1LE23011CM340AA3 711 SD4 5 1.2 1800/900 184T 460 SD10 MS Ball 1LE23011CM440AA3 800 SD4 5 1.2 1800/900 213T 460 SD10 MS Ball 1LE23012AM140AA3 831 SD4 7.5 1.9 1800/900 213T 460 SD10 MS Ball 1LE23012AM740AA3 1080 SD4 7.5 1.9 1800/900 215T 460 SD10 MS Ball 1LE23012AM240AA3 1125 SD4 10 2.5 1800/900 215T 460 SD10 MS Ball 1LE23012AM840AA3 1300 SD4 10 2.5 1800/900 254T 460 SD10 MS Ball 1LE23012BM140AA3 1356 SD4 15 3.7 1800/900 254T 460 SD10 MS Ball 1LE23012BM740AA3 1680 SD4 15 3.7 1800/900 256T 460 SD10 MS Ball 1LE23012BM240AA3 1786 SD4 20 5 1800/900 256T 460 SD10 MS Ball 1LE23012BM840AA3 2120 SD4 20 5 1800/900 284T 460 SD10 MS Ball 1LE23012CM140AA3 2226 SD4 20 5 1800/900 284T 575 SD10 MS Ball 1LE23012CM144AA3 2226 SD4 25 6.2 1800/900 284T 460 SD10 MS Ball 1LE23012CM740AA3 2540 SD4 25 6.2 1800/900 284T 575 SD10 MS Ball 1LE23012CM744AA3 2540 SD4 25 6.2 1800/900 286T 460 SD10 MS Ball 1LE23012CM240AA3 2643 SD4 25 6.2 1800/900 286T 575 SD10 MS Ball 1LE23012CM244AA3 2643 SD4 30 7.5 1800/900 286T 460 SD10 MS Ball 1LE23012CM840AA3 2975 SD4 30 7.5 1800/900 286T 575 SD10 MS Ball 1LE23012CM844AA3 2975 SD4 30 7.5 1800/900 324T 460 SD10 MS Ball 1LE23013AM140AA3 3081 SD4 30 7.5 1800/900 324T 575 SD10 MS Ball 1LE23013AM144AA3 3081 SD4 40 10 1800/900 326T 460 SD10 MS Ball 1LE23013AM240AA3 4093 SD4 40 10 1800/900 326T 575 SD10 MS Ball 1LE23013AM244AA3 4093 SD4 50 12 1800/900 364T 460 SD10 MS Ball 1LE23013CM140AA3 5027 SD4 50 12 1800/900 364T 575 SD10 MS Ball 1LE23013CM144AA3 5027 SD4 60 15 1800/900 365T 460 SD10 MS Ball 1LE23013CM240AA3 7212 SD4 60 15 1800/900 365T 575 SD10 MS Ball 1LE23013CM244AA3 7212 SD4 75 19 1800/900 405T 460 SD10 MS Ball 1LE23014AM240AA3 9142 SD4 75 19 1800/900 405T 575 SD10 MS Ball 1LE23014AM244AA3 9142 SD4 100 25 1800/900 444TS 460 SD10 MS Ball 1LE23014DM140AA3 10331 SD4 100 25 1800/900 444TS 575 SD10 MS Ball 1LE23014DM144AA3 10331 SD4 100 25 1800/900 B444T 460 SD10 MS Ball 1LE23014EM140AA3 10331 SD4 100 25 1800/900 B444T 575 SD10 MS Ball 1LE23014EM144AA3 10331 SD4 125 31 1800/900 445TS 460 SD10 MS Ball 1LE23014DM240AA3 13162 SD4 125 31 1800/900 445TS 575 SD10 MS Ball 1LE23014DM244AA3 13162 SD4 125 31 1800/900 B445T 460 SD10 MS Ball 1LE23014EM240AA3 13162 SD4 125 31 1800/900 B445T 575 SD10 MS Ball 1LE23014EM244AA3 13162 SD4 150 37 1800/900 447TS 460 SD10 MS Ball 1LE23014DM340AA3 15887 SD4 150 37 1800/900 447TS 575 SD10 MS Ball 1LE23014DM544AA3 15887 SD4 150 37 1800/900 B447T 460 SD10 MS Ball 1LE23014EM540AA3 15887 SD4 150 37 1800/900 B447T 575 SD10 MS Ball 1LE23014EM544AA3 15887 SD4 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only FL Amps at 460V or 575V Available in RGZZESD designs. Contact factory for pricing. Multi. Sym. Stock Model

- TEFC Multi-Speed SD10 MS - 1 Winding Variable Torque HP Continuous High Low RPM Frame Voltage Type DE Bearing High Efficiency List Price $ 200 50 1800/900 449TS 460 SD10 MS Ball 1LE23014EM540AA3 19103 SD4 200 50 1800/900 449TS 575 SD10 MS Ball 1LE23014DM544AA3 19103 SD4 200 50 1800/900 B449T 460 SD10 MS Ball 1LE23014EM540AA3 19103 SD4 200 50 1800/900 B449T 575 SD10 MS Ball 1LE23014EM544AA3 19103 SD4 250 63 1800/900 449TS 460 SD10 MS Ball 1LE23014DM640AA3 26378 SD4 250 63 1800/900 449TS 575 SD10 MS Ball 1LE23014DM644AA3 26378 SD4 250 63 1800/900 B449T 460 SD10 MS Ball 1LE23014EM640AA3 26378 SD4 250 63 1800/900 B449T 575 SD10 MS Ball 1LE23014EM644AA3 26378 SD4 Multi. Sym. Stock Model Introduction General Purpose Duty Lines Speeds L1 L2 L3 Conn. Low Speed T1 T2 T3 T4 T5 T6 Open Y High Speed T6 T4 T5 T1 T2 T3 Together YY Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only FL Amps at 460V or 575V Available in RGZZESD designs. Contact factory for pricing. 2009-2010 Low Voltage AC Selection and Pricing Guide 3-17 Dimensions

Introduction General Purpose Duty Duty - TEFC severe duty TEFC motors are available in two configurations they exceed NEMA Premium efficiency with our exclusive, leading-edge, die cast copper rotor design (143T 256T) or meet NEMA Premium efficiency with our die cast aluminum rotor design. Either way, these motors significantly reduce operating costs and pay for themselves in a short time through energy savings. They are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/ chemical applications. Specifications 1 to 400 HP 1.15 service factor, 40ºC ambient 3600, 1800 or 1200 RPM 3-phase, 60 Hz; 208-230/460 and 575 volt operation (143T -256T) 3-phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above, 200 & 575 volt available (284T S449T) Meets or exceeds NEMA Premium efficiency standards Class F insulation, Class B temperature rise @ 1.0SF NEMA design B (except as noted), continuous duty Meets IP54 & IEEE 45 143T to S449T frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation T-drains are provided. Lifting eyebolts are included with motors > 75 lbs. Rotor Each rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses. Insulation Proprietary inverterrated Class F non-hygroscopic insulation system with NEMA Class B temperature rise @ 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. This insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with Adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized double shielded (143T 256T) / single shielded (284T S449T) with cast iron inner caps on both ends of the motor. Alemite grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance. All motors are equipped with drive end and opposite drive end shaft V-ring slingers for added bearing protection. Provisions for Inpro/ Seal bearing isolators are standard on both ends. Lubrication A specially formulated, high temperature tested, polyurea based grease is used to provide more than four times the lubrication life of other greases. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. A ground lug is provided. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, polycarbonate fan, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Dimensions Purpose 3-18 2009-2010 Low Voltage AC Selection and Pricing Guide

- TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 3600 143T 208-230/460 Ball 1LE23211AA114AA3 408 SD2 1.4 77 75 1 3600 143T 575 Ball 1LE23211AA113AA3 408 SD2 1.12 77 75 1 1800 143T 208-230/460 Ball 1LE23211AB214AA3 381 SD2 1.4 85.5 76 1 1800 143T 575 Ball 1LE23211AB213AA3 381 SD2 1.12 85.5 76 1 1200 145T 208-230/460 Ball 1LE23211AC314AA3 473 SD2 1.6 82.5 77 1 1200 145T 575 Ball 1LE23211AC313AA3 473 SD2 1.28 82.5 77 1.5 3600 143T 208-230/460 Ball 1LE23211AA214AA3 408 SD2 2 84 70 1.5 3600 143T 575 Ball 1LE23211AA213AA3 408 SD2 1.6 84 70 1.5 1800 145T 208-230/460 Ball 1LE23211AB314AA3 422 SD2 2 86.5 80 1.5 1800 145T 575 Ball 1LE23211AB313AA3 422 SD2 1.6 86.5 80 1.5 1200 182T 208-230/460 Ball 1LE23211CC114AA3 533 SD2 2.5 87.5 113 1.5 1200 182T 575 Ball 1LE23211CC113AA3 533 SD2 2 87.5 113 2 3600 145T 208-230/460 Ball 1LE23211AA314AA3 488 SD2 2.5 85.5 72 2 3600 145T 575 Ball 1LE23211AA313AA3 488 SD2 2 85.5 72 2 1800 145T 208-230/460 Ball 1LE23211AB414AA3 465 SD2 2.8 86.5 80 2 1800 145T 575 Ball 1LE23211AB413AA3 465 SD2 2.24 86.5 80 2 1200 184T 208-230/460 Ball 1LE23211CC314AA3 596 SD2 3.2 88.5 122 2 1200 184T 575 Ball 1LE23211CC313AA3 596 SD2 2.56 88.5 122 3 3600 182T 208-230/460 Ball 1LE23211CA114AA3 549 SD2 3.9 86.5 107 3 3600 182T 575 Ball 1LE23211CA113AA3 549 SD2 3.12 86.5 107 3 1800 182T 208-230/460 Ball 1LE23211CB114AA3 515 SD2 4 89.5 118 3 1800 182T 575 Ball 1LE23211CB113AA3 515 SD2 3.2 89.5 118 3 1200 213T 208-230/460 Ball 1LE23212AC114AA3 726 SD2 4.6 89.5 164 3 1200 213T 575 Ball 1LE23212AC113AA3 726 SD2 3.68 89.5 164 5 3600 184T 208-230/460 Ball 1LE23211CA314AA3 680 SD2 6 88.5 118 5 3600 184T 575 Ball 1LE23211CA313AA3 680 SD2 4.8 88.5 118 5 1800 184T 208-230/460 Ball 1LE23211CB314AA3 602 SD2 6.9 89.5 124 5 1800 184T 575 Ball 1LE23211CB313AA3 602 SD2 5.52 89.5 124 5 1200 215T 208-230/460 Ball 1LE23212AC214AA3 1023 SD2 6.6 89.5 176 5 1200 215T 575 Ball 1LE23212AC213AA3 1023 SD2 5.28 89.5 176 7.5 3600 213T 208-230/460 Ball 1LE23212AA114AA3 821 SD2 9 89.5 160 7.5 3600 213T 575 Ball 1LE23212AA113AA3 821 SD2 7.2 89.5 160 7.5 1800 213T 208-230/460 Ball 1LE23212AB114AA3 816 SD2 10 91.7 191 7.5 1800 213T 575 Ball 1LE23212AB113AA3 816 SD2 8 91.7 191 7.5 1200 254T 208-230/460 Ball 1LE23212BC114AA3 1361 SD2 10.5 91 292 7.5 1200 254T 575 Ball 1LE23212BC113AA3 1361 SD2 8.4 91 292 10 3600 215T 208-230/460 Ball 1LE23212AA214AA3 960 SD2 11.5 90.2 174 10 3600 215T 575 Ball 1LE23212AA213AA3 960 SD2 9.2 90.2 174 10 1800 215T 208-230/460 Ball 1LE23212AB214AA3 984 SD2 13 91.7 197 10 1800 215T 575 Ball 1LE23212AB213AA3 984 SD2 10.4 91.7 197 10 1200 256T 208-230/460 Ball 1LE23212BC214AA3 1662 SD2 13 91 288 10 1200 256T 575 Ball 1LE23212BC213AA3 1662 SD2 10.4 91 288 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V DOE#CC032A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Frames 280-440 available after RGZEESD stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-19 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 FL Amps* FL Nom. Eff. (%) Weight (lbs) 15 3600 254T 208-230/460 Ball 1LE23212BA114AA3 1319 SD2 17.5 91 287 15 3600 254T 575 Ball 1LE23212BA113AA3 1319 SD2 14 91 287 15 1800 254T 208-230/460 Ball 1LE23212BB114AA3 1296 SD2 19.5 92.4 289 15 1800 254T 575 Ball 1LE23212BB113AA3 1296 SD2 15.6 92.4 289 15 1200 284T 230/460 Ball 1LE23212CC116AA3 2110 SD2 21 91.7 400 15 1200 284T 575 Ball 1LE23212CC113AA3 2110 SD2 16.8 91.7 400 20 3600 256T 208-230/460 Ball 1LE23212BA214AA3 1633 SD2 23 91 323 20 3600 256T 575 Ball 1LE23212BA213AA3 1633 SD2 18.4 91 323 20 1800 256T 208-230/460 Ball 1LE23212BB214AA3 1614 SD2 26 93 322 20 1800 256T 575 Ball 1LE23212BB213AA3 1614 SD2 20.8 93 322 20 1200 286T 230/460 Ball 1LE23212CC216AA3 2570 SD2 27 91.7 465 20 1200 286T 575 Ball 1LE23212CC213AA3 2570 SD2 21.6 91.7 465 25 3600 284TS 460 Ball 1LE23212DA112AA3 1926 SD2 29 91.7 415 25 3600 284TS 575 Ball 1LE23212DA113AA3 1926 SD2 23.2 91.7 415 25 1800 284TS 460 Ball 1LE23212DB112AA3 1838 SD2 30 93.6 445 25 1800 284T 460 Ball 1LE23212CB112AA3 1838 SD2 30 93.6 445 25 1800 284TS 575 Ball 1LE23212DB113AA3 1838 SD2 24 93.6 445 25 1800 284T 575 Ball 1LE23212CB113AA3 1838 SD2 24 93.6 445 25 1200 324T 460 Ball 1LE23213AC112AA3 3028 SD2 33 93 640 25 1200 324T 575 Ball 1LE23213AC113AA3 3028 SD2 26.4 93 640 30 3600 286TS 460 Ball 1LE23212DA212AA3 2249 SD2 34 91.7 430 30 3600 286TS 575 Ball 1LE23212DA213AA3 2249 SD2 27.2 91.7 430 30 1800 286TS 460 Ball 1LE23212DB212AA3 2139 SD2 35 93.6 465 30 1800 286T 460 Ball 1LE23212CB212AA3 2139 SD2 35 93.6 465 30 1800 286TS 575 Ball 1LE23212DB213AA3 2139 SD2 28 93.6 465 30 1800 286T 575 Ball 1LE23212CB213AA3 2139 SD2 28 93.6 465 30 1200 326T 460 Ball 1LE23213AC212AA3 3587 SD2 39 93 675 30 1200 326T 575 Ball 1LE23213AC213AA3 3587 SD2 31.2 93 675 40 3600 324TS 460 Ball 1LE23213BA112AA3 2967 SD2 45 93.6 575 40 3600 324TS 575 Ball 1LE23213BA113AA3 2967 SD2 36 93.6 575 40 1800 324TS 460 Ball 1LE23213BB112AA3 2841 SD2 46 94.1 666 40 1800 324T 460 Ball 1LE23213AB112AA3 2841 SD2 46 94.1 666 40 1800 324TS 575 Ball 1LE23213BB113AA3 2841 SD2 36.8 94.1 666 40 1800 324T 575 Ball 1LE23213AB113AA3 2841 SD2 36.8 94.1 666 40 1200 364T 460 Ball 1LE23213CC112AA3 4864 SD2 49 94.1 863 40 1200 364T 575 Ball 1LE23213CC113AA3 4864 SD2 39.2 94.1 863 50 3600 326TS 460 Ball 1LE23213BA212AA3 3838 SD2 55 93.6 610 50 3600 326TS 575 Ball 1LE23213BA213AA3 3838 SD2 44 93.6 610 50 1800 326TS 460 Ball 1LE23213BB212AA3 3489 SD2 58 94.5 700 50 1800 326T 460 Ball 1LE23213AB212AA3 3489 SD2 58 94.5 700 50 1800 326TS 575 Ball 1LE23213BB213AA3 3489 SD2 46.4 94.5 700 50 1800 326T 575 Ball 1LE23213AB213AA3 3489 SD2 46.4 94.5 700 50 1200 365T 460 Ball 1LE23213CC212AA3 5584 SD2 62 94.1 900 50 1200 365T 575 Ball 1LE23213CC213AA3 5584 SD2 49.6 94.1 900 Stock Model 3-20 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DOE#CC032A DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 60 3600 364TS 460 Ball 1LE23213DA112AA3 5049 SD2 68 93.6 717 60 3600 364TS 575 Ball 1LE23213DA113AA3 5049 SD2 54.4 93.6 717 60 1800 364TS 460 Ball 1LE23213DB112AA3 5005 SD2 68 95 930 60 1800 364T 460 Ball 1LE23213CB112AA3 5005 SD2 68 95 930 60 1800 364TS 575 Ball 1LE23213DB113AA3 5005 SD2 54.4 95 930 60 1800 364T 575 Ball 1LE23213CB113AA3 5005 SD2 54.4 95 930 60 1200 404T 460 Ball 1LE23214AC112AA3 6543 SD2 74 94.5 1100 60 1200 404T 575 Ball 1LE23214AC113AA3 6543 SD2 59.2 94.5 1100 75 3600 365TS 460 Ball 1LE23213DA212AA3 6340 SD2 85 94.1 815 75 3600 365TS 575 Ball 1LE23213DA213AA3 6340 SD2 68 94.1 815 75 1800 365TS 460 Ball 1LE23213DB212AA3 6345 SD2 85 95.4 1000 75 1800 365T 460 Ball 1LE23213CB212AA3 6345 SD2 85 95.4 1000 75 1800 365TS 575 Ball 1LE23213DB213AA3 6345 SD2 68 95.4 1000 75 1800 365T 575 Ball 1LE23213CB213AA3 6345 SD2 68 95.4 1000 75 1200 405T 460 Ball 1LE23214AC212AA3 7703 SD2 93 94.5 1150 75 1200 405T 575 Ball 1LE23214AC213AA3 7703 SD2 74.4 94.5 1150 100 3600 405TS 460 Ball 1LE23214BA212AA3 8496 SD2 108 94.1 1100 100 3600 405TS 575 Ball 1LE23214BA213AA3 8496 SD2 86.4 94.1 1100 100 1800 405TS 460 Ball 1LE23214BB212AA3 7839 SD2 113 95.4 1160 100 1800 405T 460 Ball 1LE23214AB212AA3 7839 SD2 113 95.4 1160 100 1800 405TS 575 Ball 1LE23214BB213AA3 7839 SD2 90.4 95.4 1160 100 1800 405T 575 Ball 1LE23214AB213AA3 7839 SD2 90.4 95.4 1160 100 1200 444TS 460 Ball 1LE23214DC112AA3 10529 SD2 117 95 1545 100 1200 444T 460 Roller 1LE23214CC112AA3 10529 SD2 117 95 1545 100 1200 B444T 460 Ball 1LE23214EC112AA3 10529 SD2 117 95 1545 100 1200 444TS 575 Ball 1LE23214DC113AA3 10529 SD2 93.6 95 1545 100 1200 444T 575 Roller 1LE23214CC113AA3 10529 SD2 93.6 95 1545 100 1200 B444T 575 Ball 1LE23214EC113AA3 10529 SD2 93.6 95 1545 125 3600 444TS 460 Ball 1LE23214DA112AA3 11105 SD2 138 95 1454 125 3600 444TS 575 Ball 1LE23214DA113AA3 11105 SD2 110.4 95 1454 125 1800 444TS 460 Ball 1LE23214DB112AA3 10320 SD2 143 95.4 1600 125 1800 444T 460 Roller 1LE23214CB112AA3 10320 SD2 143 95.4 1600 125 1800 B444T 460 Ball 1LE23214EB112AA3 10320 SD2 143 95.4 1600 125 1800 444TS 575 Ball 1LE23214DB113AA3 10320 SD2 114.4 95.4 1600 125 1800 444T 575 Roller 1LE23214CB113AA3 10320 SD2 114.4 95.4 1600 125 1800 B444T 575 Ball 1LE23214EB113AA3 10320 SD2 114.4 95.4 1600 125 1200 445TS 460 Ball 1LE23214DC212AA3 12932 SD2 144 95 1720 125 1200 445T 460 Roller 1LE23214CC212AA3 12932 SD2 144 95 1720 125 1200 B445T 460 Ball 1LE23214EC212AA3 12932 SD2 144 95 1720 125 1200 445TS 575 Ball 1LE23214DC213AA3 12932 SD2 115.2 95 1720 125 1200 445T 575 Roller 1LE23214CC213AA3 12932 SD2 115.2 95 1720 125 1200 B445T 575 Ball 1LE23214EC213AA3 12932 SD2 115.2 95 1720 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Frames 280-440 available after RGZEESD stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-21 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 150 3600 445TS 460 Ball 1LE23214DA212AA3 13341 SD2 164 95 1615 150 3600 445TS 575 Ball 1LE23214DA213AA3 13341 SD2 131.2 95 1615 150 1800 445TS 460 Ball 1LE23214DB212AA3 11998 SD2 170 95.8 1710 150 1800 445T 460 Roller 1LE23214CB212AA3 11998 SD2 170 95.8 1710 150 1800 B445T 460 Ball 1LE23214EB212AA3 11998 SD2 170 95.8 1710 150 1800 445TS 575 Ball 1LE23214DB213AA3 11998 SD2 136 95.8 1710 150 1800 445T 575 Roller 1LE23214CB213AA3 11998 SD2 136 95.8 1710 150 1800 B445T 575 Ball 1LE23214EB213AA3 11998 SD2 136 95.8 1710 150 1200 447TS 460 Ball 1LE23214DC312AA3 14469 SD2 172 95.8 1995 150 1200 447T 460 Roller 1LE23214CC312AA3 14469 SD2 172 95.8 1995 150 1200 B447T 460 Ball 1LE23214EC312AA3 14469 SD2 172 95.8 1995 150 1200 447TS 575 Ball 1LE23214DC313AA3 14469 SD2 137.6 95.8 1995 150 1200 447T 575 Roller 1LE23214CC313AA3 14469 SD2 137.6 95.8 1995 150 1200 B447T 575 Ball 1LE23214EC313AA3 14469 SD2 137.6 95.8 1995 200 3600 447TS 460 Ball 1LE23214DA312AA3 16876 SD2 216 95.4 1890 200 3600 447TS 575 Ball 1LE23214DA313AA3 16876 SD2 172.8 95.4 1890 200 1800 447TS 460 Ball 1LE23214DB312AA3 14593 SD2 226 96.2 2035 200 1800 447T 460 Roller 1LE23214CB312AA3 14593 SD2 226 96.2 2035 200 1800 B447T 460 Ball 1LE23214EB312AA3 14593 SD2 226 96.2 2035 200 1800 447TS 575 Ball 1LE23214DB313AA3 14593 SD2 180.8 96.2 2035 200 1800 447T 575 Roller 1LE23214CB313AA3 14593 SD2 180.8 96.2 2035 200 1800 B447T 575 Ball 1LE23214EB313AA3 14593 SD2 180.8 96.2 2035 200 1200 449TS 460 Ball 1LE23214DC512AA3 17712 SD2 227 95.8 2425 200 1200 449T 460 Roller 1LE23214CC512AA3 17712 SD2 227 95.8 2425 200 1200 B449T 460 Ball 1LE23214EC512AA3 17712 SD2 227 95.8 2425 200 1200 449TS 575 Ball 1LE23214DC513AA3 17712 SD2 181.6 95.8 2425 200 1200 449T 575 Roller 1LE23214CC513AA3 17712 SD2 181.6 95.8 2425 200 1200 B449T 575 Ball 1LE23214EC513AA3 17712 SD2 181.6 95.8 2425 250 3600 449TS 460 Ball 1LE23214DA512AA3 21285 SD2 269 95.8 2272 250 3600 449TS 575 Ball 1LE23214DA513AA3 21285 SD2 215.2 95.8 2272 250 1800 449TS 460 Ball 2 1LE23214DB512AA3 18308 SD2 278 96.2 2425 250 1800 449T 460 Roller 2 1LE23214CB512AA3 18308 SD2 278 96.2 2425 250 1800 B449T 460 Ball 2 1LE23214EB512AA3 18308 SD2 278 96.2 2425 250 1800 449TS 575 Ball 2 1LE23214DB513AA3 18308 SD2 224.8 96.2 2425 250 1800 449T 575 Roller 2 1LE23214CB513AA3 18308 SD2 224.8 96.2 2425 250 1800 B449T 575 Ball 2 1LE23214EB513AA3 18308 SD2 224.8 96.2 2425 250 1200 449TS 460 Ball 2 1LE23214DC612AA3 19274 SD2 281 95.8 2390 250 1200 449T 460 Roller 2 1LE23214CC612AA3 19274 SD2 281 95.8 2390 250 1200 B449T 460 Ball 2 1LE23214EC612AA3 19274 SD2 281 95.8 2390 250 1200 449TS 575 Ball 2 1LE23214DC613AA3 19274 SD2 224.8 95.8 2390 250 1200 449T 575 Roller 2 1LE23214CC613AA3 19274 SD2 224.8 95.8 2390 250 1200 B449T 575 Ball 2 1LE23214EC613AA3 19274 SD2 224.8 95.8 2390 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Frames 280-440 available after RGZEESD stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A Stock Model 3-22 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DOE#CC032A DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 300 3600 449TS 460 Ball 1LE23214DA612AA3 26486 SD2 323 95.8 2200 300 3600 449TS 575 Ball 1LE23214DA613AA3 26486 SD2 258.4 95.8 2200 300 1800 449TS 460 Ball 2 1LE23214DB612AA3 19410 SD2 346 96.2 3130 300 1800 449T 460 Roller 2 1LE23214CB612AA3 19410 SD2 346 96.2 3130 300 1800 B449T 460 Ball 2 1LE23214EB612AA3 19410 SD2 346 96.2 3130 300 1800 449TS 575 Ball 2 1LE23214DB613AA3 19410 SD2 276.8 96.2 3130 300 1800 449T 575 Roller 2 1LE23214CB613AA3 19410 SD2 276.8 96.2 3130 300 1800 B449T 575 Ball 2 1LE23214EB613AA3 19410 SD2 276.8 96.2 3130 300 1200 S449LS 460 Roller 2 1LE23214FC112AA3 35929 SD2 342 95.8 3240 300 1200 S449LS 575 Roller 2 1LE23214FC113AA3 35929 SD2 273.6 95.8 3240 350 3600 S449SS 460 Ball 1 1LE23214GA112AA3 33271 SD2 372 95.8 2890 350 3600 S449SS 575 Ball 1 1LE23214GA113AA3 33271 SD2 297.6 95.8 2890 350 1800 S449SS 460 Ball 1LE23214GB212AA3 30807 SD2 392 96.2 3190 350 1800 S449LS 460 Roller 1LE23214FB212AA3 30807 SD2 392 96.2 3190 350 1800 S449SS 575 Ball 1LE23214GB213AA3 30807 SD2 313.6 96.2 3190 350 1800 S449LS 575 Roller 1LE23214FB213AA3 30807 SD2 313.6 96.2 3190 400 3600 S449SS 460 Ball 1 1LE23214GA312AA3 37341 SD2 422 95.8 3065 400 3600 S449SS 575 Ball 1 1LE23214GA313AA3 37341 SD2 337.6 95.8 3065 400 1800 S449SS 460 Ball 1LE23214GB312AA3 34584 SD2 454 96.2 3240 400 1800 S449LS 460 Roller 1LE23214FB312AA3 34584 SD2 454 96.2 3240 400 1800 S449SS 575 Ball 1LE23214GB313AA3 34584 SD2 363.2 96.2 3240 400 1800 S449LS 575 Roller 1LE23214FB313AA3 34584 SD2 363.2 96.2 3240 C-Face, Horizontal, Footless 1 3600 143TC 208-230/460 Ball 1LE23211AA114GA3 471 SD2 1.4 77 75 1 3600 143TC 575 Ball 1LE23211AA113GA3 471 SD2 1.12 77 75 1 1800 143TC 208-230/460 Ball 1LE23211AB214GA3 445 SD2 1.4 85.5 76 1 1800 143TC 575 Ball 1LE23211AB213GA3 445 SD2 1.12 85.5 76 1 1200 145TC 208-230/460 Ball 1LE23211AC314GA3 536 SD2 1.6 82.5 77 1 1200 145TC 575 Ball 1LE23211AC313GA3 536 SD2 1.28 82.5 77 1.5 3600 143TC 208-230/460 Ball 1LE23211AA214GA3 471 SD2 2 84 70 1.5 3600 143TC 575 Ball 1LE23211AA213GA3 471 SD2 1.6 84 70 1.5 1800 145TC 208-230/460 Ball 1LE23211AB314GA3 486 SD2 2 86.5 80 1.5 1800 145TC 575 Ball 1LE23211AB313GA3 486 SD2 1.6 86.5 80 1.5 1200 182TC 208-230/460 Ball 1LE23211CC114GA3 626 SD2 2.5 87.5 113 1.5 1200 182TC 575 Ball 1LE23211CC113GA3 626 SD2 2 87.5 113 2 3600 145TC 208-230/460 Ball 1LE23211AA314GA3 551 SD2 2.5 85.5 72 2 3600 145TC 575 Ball 1LE23211AA313GA3 551 SD2 2 85.5 72 2 1800 145TC 208-230/460 Ball 1LE23211AB414GA3 528 SD2 2.8 86.5 80 2 1800 145TC 575 Ball 1LE23211AB413GA3 528 SD2 2.24 86.5 80 2 1200 184TC 208-230/460 Ball 1LE23211CC314GA3 689 SD2 3.2 88.5 122 2 1200 184TC 575 Ball 1LE23211CC313GA3 689 SD2 2.56 88.5 122 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Frames 280-440 available after RGZEESD stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-23 Introduction General Purpose Duty Duty Purpose Dimensions

- TEFC Introduction (Aluminum Rotor) HP RPM Frame Voltage Type C-Face, Horizontal, Footless - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 3 3600 182TC 208-230/460 Ball 1LE23211CA114GA3 643 SD2 3.9 86.5 107 3 3600 182TC 575 Ball 1LE23211CA113GA3 643 SD2 3.12 86.5 107 3 1800 182TC 208-230/460 Ball 1LE23211CB114GA3 608 SD2 4 89.5 118 3 1800 182TC 575 Ball 1LE23211CB113GA3 608 SD2 3.2 89.5 118 3 1200 213TC 208-230/460 Ball 1LE23212AC114GA3 820 SD2 4.6 89.5 164 3 1200 213TC 575 Ball 1LE23212AC113GA3 820 SD2 3.68 89.5 164 5 3600 184TC 208-230/460 Ball 1LE23211CA314GA3 773 SD2 6 88.5 118 5 3600 184TC 575 Ball 1LE23211CA313GA3 773 SD2 4.8 88.5 118 5 1800 184TC 208-230/460 Ball 1LE23211CB314GA3 696 SD2 6.9 89.5 124 5 1800 184TC 575 Ball 1LE23211CB313GA3 696 SD2 5.52 89.5 124 5 1200 215TC 208-230/460 Ball 1LE23212AC214GA3 1117 SD2 6.6 89.5 176 5 1200 215TC 575 Ball 1LE23212AC213GA3 1117 SD2 5.28 89.5 176 7.5 3600 213TC 208-230/460 Ball 1LE23212AA114GA3 914 SD2 9 89.5 160 7.5 3600 213TC 575 Ball 1LE23212AA113GA3 914 SD2 7.2 89.5 160 7.5 1800 213TC 208-230/460 Ball 1LE23212AB114GA3 910 SD2 10 91.7 191 7.5 1800 213TC 575 Ball 1LE23212AB113GA3 910 SD2 8 91.7 191 7.5 1200 254TC 208-230/460 Ball 1LE23212BC114GA3 1488 SD2 10.5 91 292 7.5 1200 254TC 575 Ball 1LE23212BC113GA3 1488 SD2 8.4 91 292 10 3600 215TC 208-230/460 Ball 1LE23212AA214GA3 1054 SD2 11.5 90.2 174 10 3600 215TC 575 Ball 1LE23212AA213GA3 1054 SD2 9.2 90.2 174 10 1800 215TC 208-230/460 Ball 1LE23212AB214GA3 1077 SD2 13 91.7 197 10 1800 215TC 575 Ball 1LE23212AB213GA3 1077 SD2 10.4 91.7 197 10 1200 256TC 208-230/460 Ball 1LE23212BC214GA3 1789 SD2 13 91 288 10 1200 256TC 575 Ball 1LE23212BC213GA3 1789 SD2 10.4 91 288 15 3600 254TC 208-230/460 Ball 1LE23212BA114GA3 1445 SD2 17.5 91 287 15 3600 254TC 575 Ball 1LE23212BA113GA3 1445 SD2 14 91 287 15 1800 254TC 208-230/460 Ball 1LE23212BB114GA3 1422 SD2 19.5 92.4 289 15 1800 254TC 575 Ball 1LE23212BB113GA3 1422 SD2 15.6 92.4 289 20 3600 256TC 208-230/460 Ball 1LE23212BA214GA3 1760 SD2 23 91 323 20 3600 256TC 575 Ball 1LE23212BA213GA3 1760 SD2 18.4 91 323 20 1800 256TC 208-230/460 Ball 1LE23212BB214GA3 1741 SD2 26 93 322 20 1800 256TC 575 Ball 1LE23212BB213GA3 1741 SD2 20.8 93 322 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Frames 280-440 available after RGZEESD stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A Stock Model Dimensions General Purpose Duty Duty Purpose 3-24 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC (Copper Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ NEMA Premium Efficiency Plus Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 1800 143T 208-230/460 Ball 1LE23111AB214AA3 444 SD2 1.5 86.5 81 1 1800 143T 575 Ball 1LE23111AB213AA3 444 SD2 1.2 86.5 81 1 1200 145T 208-230/460 Ball 1LE23111AC314AA3 551 SD2 1.6 84 81 1 1200 145T 575 Ball 1LE23111AC313AA3 551 SD2 1.28 84 81 1.5 3600 143T 208-230/460 Ball 1LE23111AA214AA3 476 SD2 1.9 87.5 80 1.5 3600 143T 575 Ball 1LE23111AA213AA3 476 SD2 1.52 87.5 80 1.5 1800 145T 208-230/460 Ball 1LE23111AB314AA3 492 SD2 2.1 87.5 81 1.5 1800 145T 575 Ball 1LE23111AB313AA3 492 SD2 1.68 87.5 81 2 3600 145T 208-230/460 Ball 1LE23111AA314AA3 569 SD2 2.6 88.5 80 2 3600 145T 575 Ball 1LE23111AA313AA3 569 SD2 2.08 88.5 80 2 1800 145T 208-230/460 Ball 1LE23111AB414AA3 543 SD2 2.8 87.5 81 2 1800 145T 575 Ball 1LE23111AB413AA3 543 SD2 2.24 87.5 81 3 3600 182T 208-230/460 Ball 1LE23111CA114AA3 641 SD2 3.8 89.5 121 3 3600 182T 575 Ball 1LE23111CA113AA3 641 SD2 3.04 89.5 121 3 1800 182T 208-230/460 Ball 1LE23111CB114AA3 601 SD2 4 90.2 125 3 1800 182T 575 Ball 1LE23111CB113AA3 601 SD2 3.2 90.2 125 3 1200 213T 208-230/460 Ball 1LE23112AC114AA3 847 SD2 4.3 90.2 170 3 1200 213T 575 Ball 1LE23112AC113AA3 847 SD2 3.44 90.2 170 5 3600 184T 208-230/460 Ball 1LE23111CA314AA3 793 SD2 6.2 90.2 123 5 3600 184T 575 Ball 1LE23111CA313AA3 793 SD2 4.96 90.2 123 5 1800 184T 208-230/460 Ball 1LE23111CB314AA3 702 SD2 6.7 90.2 129 5 1800 184T 575 Ball 1LE23111CB313AA3 702 SD2 5.36 90.2 129 5 1200 215T 208-230/460 Ball 1LE23112AC214AA3 1194 SD2 6.8 90.2 184 5 1200 215T 575 Ball 1LE23112AC213AA3 1194 SD2 5.44 90.2 184 7.5 3600 213T 208-230/460 Ball 1LE23112AA114AA3 958 SD2 8.5 91.7 191 7.5 3600 213T 575 Ball 1LE23112AA113AA3 958 SD2 6.8 91.7 191 7.5 1800 213T 208-230/460 Ball 1LE23112AB114AA3 952 SD2 9.5 92.4 198 7.5 1800 213T 575 Ball 1LE23112AB113AA3 952 SD2 7.6 92.4 198 7.5 1200 254T 208-230/460 Ball 1LE23112BC114AA3 1588 SD2 10.5 92.4 336 7.5 1200 254T 575 Ball 1LE23112BC113AA3 1588 SD2 8.4 92.4 336 10 3600 215T 208-230/460 Ball 1LE23112AA214AA3 1120 SD2 11.5 91.7 196 10 3600 215T 575 Ball 1LE23112AA213AA3 1120 SD2 9.2 91.7 196 10 1800 215T 208-230/460 Ball 1LE23112AB214AA3 1148 SD2 12.5 92.4 206 10 1800 215T 575 Ball 1LE23112AB213AA3 1148 SD2 10 92.4 206 10 1200 256T 208-230/460 Ball 1LE23112BC214AA3 1939 SD2 13.5 92.4 337 10 1200 256T 575 Ball 1LE23112BC213AA3 1939 SD2 10.8 92.4 337 15 3600 254T 208-230/460 Ball 1LE23112BA114AA3 1538 SD2 17 92.4 309 15 3600 254T 575 Ball 1LE23112BA113AA3 1538 SD2 13.6 92.4 309 15 1800 254T 208-230/460 Ball 1LE23112BB114AA3 1512 SD2 19 93 297 15 1800 254T 575 Ball 1LE23112BB113AA3 1512 SD2 15.2 93 297 20 3600 256T 208-230/460 Ball 1LE23112BA214AA3 1905 SD2 23 92.4 333 20 3600 256T 575 Ball 1LE23112BA213AA3 1905 SD2 18 92.4 333 20 1800 256T 208-230/460 Ball 1LE23112BB214AA3 1883 SD2 25 93.6 341 20 1800 256T 575 Ball 1LE23112BB213AA3 1883 SD2 20 93.6 341 Prices and specifications are subject to change without notice Stock availability subject to sale DOE#CC032A Exceeds Energy Independence & Security Act Efficiency Levels 2010 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model delivery for stocked motors only *FL Amps at 460V or 575V 3-25 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC (Copper Rotor) HP RPM Frame Voltage Type C-Face, Horizontal, Footless DE Bearing List Price $ NEMA Premium Efficiency Plus Mult. Sym. Exceeds Energy Independence & Security Act Efficiency Levels 2010 FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 1800 143TC 208-230/460 Ball 1LE23111AB214GA3 519 SD2 1.5 86.5 81 1 1800 143TC 575 Ball 1LE23111AB213GA3 519 SD2 1.2 86.5 81 1 1200 145TC 208-230/460 Ball 1LE23111AC314GA3 625 SD2 1.6 84 81 1 1200 145TC 575 Ball 1LE23111AC313GA3 625 SD2 1.28 84 81 1.5 3600 143TC 208-230/460 Ball 1LE23111AA214GA3 549 SD2 1.9 87.5 80 1.5 3600 143TC 575 Ball 1LE23111AA213GA3 549 SD2 1.52 87.5 80 1.5 1800 145TC 208-230/460 Ball 1LE23111AB314GA3 567 SD2 2.1 87.5 81 1.5 1800 145TC 575 Ball 1LE23111AB313GA3 567 SD2 1.68 87.5 81 2 3600 145TC 208-230/460 Ball 1LE23111AA314GA3 643 SD2 2.6 88.5 80 2 3600 145TC 575 Ball 1LE23111AA313GA3 643 SD2 2.08 88.5 80 2 1800 145TC 208-230/460 Ball 1LE23111AB414GA3 616 SD2 2.8 87.5 81 2 1800 145TC 575 Ball 1LE23111AB413GA3 616 SD2 2.24 87.5 81 3 3600 182TC 208-230/460 Ball 1LE23111CA114GA3 750 SD2 3.8 89.5 121 3 3600 182TC 575 Ball 1LE23111CA113GA3 750 SD2 3.04 89.5 121 3 1800 182TC 208-230/460 Ball 1LE23111CB114GA3 710 SD2 4 90.2 125 3 1800 182TC 575 Ball 1LE23111CB113GA3 710 SD2 3.2 90.2 125 3 1200 213TC 208-230/460 Ball 1LE23112AC114GA3 957 SD2 4.3 90.2 170 3 1200 213TC 575 Ball 1LE23112AC113GA3 957 SD2 3.44 90.2 170 5 3600 184TC 208-230/460 Ball 1LE23111CA314GA3 902 SD2 6.2 90.2 123 5 3600 184TC 575 Ball 1LE23111CA313GA3 902 SD2 4.96 90.2 123 5 1800 184TC 208-230/460 Ball 1LE23111CB314GA3 812 SD2 6.7 90.2 129 5 1800 184TC 575 Ball 1LE23111CB313GA3 812 SD2 5.36 90.2 129 5 1200 215TC 208-230/460 Ball 1LE23112AC214GA3 1303 SD2 6.8 90.2 184 5 1200 215TC 575 Ball 1LE23112AC213GA3 1303 SD2 5.44 90.2 184 7.5 3600 213TC 208-230/460 Ball 1LE23112AA114GA3 1067 SD2 8.5 91.7 191 7.5 3600 213TC 575 Ball 1LE23112AA113GA3 1067 SD2 6.8 91.7 191 7.5 1800 213TC 208-230/460 Ball 1LE23112AB114GA3 1062 SD2 9.5 92.4 198 7.5 1800 213TC 575 Ball 1LE23112AB113GA3 1062 SD2 7.6 92.4 198 7.5 1200 254TC 208-230/460 Ball 1LE23112BC114GA3 1736 SD2 10.5 92.4 336 7.5 1200 254TC 575 Ball 1LE23112BC113GA3 1736 SD2 8.4 92.4 336 10 3600 215TC 208-230/460 Ball 1LE23112AA214GA3 1230 SD2 11.5 91.7 196 10 3600 215TC 575 Ball 1LE23112AA213GA3 1230 SD2 9.2 91.7 196 10 1800 215TC 208-230/460 Ball 1LE23112AB214GA3 1257 SD2 12.5 92.4 206 10 1800 215TC 575 Ball 1LE23112AB213GA3 1257 SD2 10 92.4 206 10 1200 256TC 208-230/460 Ball 1LE23112BC214GA3 2087 SD2 13.5 92.4 337 10 1200 256TC 575 Ball 1LE23112BC213GA3 2087 SD2 10.8 92.4 337 15 3600 254TC 208-230/460 Ball 1LE23112BA114GA3 1685 SD2 17 92.4 309 15 3600 254TC 575 Ball 1LE23112BA113GA3 1685 SD2 13.6 92.4 309 15 1800 254TC 208-230/460 Ball 1LE23112BB114GA3 1659 SD2 19 93 297 15 1800 254TC 575 Ball 1LE23112BB113GA3 1659 SD2 15.2 93 297 20 3600 256TC 208-230/460 Ball 1LE23112BA214GA3 2053 SD2 23 92.4 333 20 3600 256TC 575 Ball 1LE23112BA213GA3 2053 SD2 18 92.4 333 20 1800 256TC 208-230/460 Ball 1LE23112BB214GA3 2031 SD2 25 93.6 341 20 1800 256TC 575 Ball 1LE23112BB213GA3 2031 SD2 20 93.6 341 Stock Model Prices and specifications are subject to change without notice Stock availability subject to sale 3-26 2009-2010 Low Voltage AC Selection and Pricing Guide delivery for stocked motors only *FL Amps at 460V or 575V DOE#CC032A

- TEFC RGZEESD RGZEESD severe duty TEFC motors meet or exceed NEMA Premium efficiencies. These motors significantly reduce operating costs and pay for themselves in a short time through energy savings. They are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/ chemical applications. Specifications 25 to 400 HP 1.15 service factor, 40ºC ambient 3600, 1800 or 1200 RPM 3-phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above, 200 & 575 volt available Meets or exceeds NEMA Premium efficiency standards Class F insulation, Class B temperature rise @ 1.0SF NEMA design B (except as noted), continuous duty Meets IP55 & IEEE 45 284T to S449 frame RGZEESD Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation T-drains are provided. Lifting eyebolts are included with motors > 75 lbs. Rotor Each rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses. Insulation Proprietary inverterrated Class F non-hygroscopic insulation system with NEMA Class B temperature rise @ 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. This insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized single shielded, with cast iron inner caps. Alemite grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance. All motors are equipped with drive end and opposite drive end shaft V-ring slingers for added bearing protection. Provisions for Inpro/Seal bearing isolators are standard on both ends. Lubrication A specially formulated, high temperature tested, polyurea based grease is used to provide more than four times the lubrication life of other greases. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. Includes a ground lug. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, polycarbonate fan, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & Cutom Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose Specifications table begins on the next page 2009-2010 Low Voltage AC Selection and Pricing Guide 3-27 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions - TEFC RGZEESD HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. NEMA Premium Efficiency FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 3600 143T 230/460 RGZEESD Ball 1LE29721AA116AA3 410 SA-7EXSD 1.3 82.5 58 1 3600 143T 575 RGZEESD Ball 1LE29721AA113AA3 410 SA-7EXSD 1.04 82.5 58 1 1800 143T 230/460 RGZEESD Ball 1LE29721AB216AA3 384 SA-7EXSD 1.5 85.5 62 1 1800 143T 575 RGZEESD Ball 1LE29721AB213AA3 384 SA-7EXSD 1.2 85.5 62 1.5 3600 143T 230/460 RGZEESD Ball 1LE29721AA216AA3 410 SA-7EXSD 1.9 85.5 60 1.5 3600 143T 575 RGZEESD Ball 1LE29721AA213AA3 410 SA-7EXSD 1.52 85.5 60 1.5 1800 145T 230/460 RGZEESD Ball 1LE29721AB316AA3 426 SA-7EXSD 2.2 86.5 65 1.5 1800 145T 575 RGZEESD Ball 1LE29721AB313AA3 426 SA-7EXSD 1.76 86.5 65 2 3600 145T 230/460 RGZEESD Ball 1LE29721AA316AA3 491 SA-7EXSD 2.4 86.5 67 2 3600 145T 575 RGZEESD Ball 1LE29721AA313AA3 491 SA-7EXSD 1.92 86.5 67 2 1800 145T 230/460 RGZEESD Ball 1LE29721AB416AA3 469 SA-7EXSD 2.8 86.5 69 2 1800 145T 575 RGZEESD Ball 1LE29721AB413AA3 469 SA-7EXSD 2.24 86.5 69 3 3600 182T 230/460 RGZEESD Ball 1LE29721CA116AA3 553 SA-7EXSD 3.6 86.5 82 3 3600 182T 575 RGZEESD Ball 1LE29721CA113AA3 553 SA-7EXSD 2.88 86.5 82 3 1800 182T 230/460 RGZEESD Ball 1LE29721CB116AA3 519 SA-7EXSD 4 89.5 113 3 1800 182T 575 RGZEESD Ball 1LE29721CB113AA3 519 SA-7EXSD 3.2 89.5 113 5 3600 184T 230/460 RGZEESD Ball 1LE29721CA316AA3 685 SA-7EXSD 5.7 88.5 95 5 3600 184T 575 RGZEESD Ball 1LE29721CA313AA3 685 SA-7EXSD 4.56 88.5 95 5 1800 184T 230/460 RGZEESD Ball 1LE29721CB316AA3 607 SA-7EXSD 6.4 89.5 126 5 1800 184T 575 RGZEESD Ball 1LE29721CB313AA3 607 SA-7EXSD 5.12 89.5 126 7.5 3600 213T 230/460 RGZEESD Ball 1LE29722AA116AA3 828 SA-7EXSD 8.6 89.5 146 7.5 3600 213T 575 RGZEESD Ball 1LE29722AA113AA3 828 SA-7EXSD 6.88 89.5 146 7.5 1800 213T 230/460 RGZEESD Ball 1LE29722AB116AA3 823 SA-7EXSD 9.5 91.7 205 7.5 1800 213T 575 RGZEESD Ball 1LE29722AB113AA3 823 SA-7EXSD 7.6 91.7 205 10 3600 215T 230/460 RGZEESD Ball 1LE29722AA216AA3 968 SA-7EXSD 11.4 90.2 164 10 3600 215T 575 RGZEESD Ball 1LE29722AA213AA3 968 SA-7EXSD 9.12 90.2 164 10 1800 215T 230/460 RGZEESD Ball 1LE29722AB216AA3 991 SA-7EXSD 12.5 91.7 222 10 1800 215T 575 RGZEESD Ball 1LE29722AB213AA3 991 SA-7EXSD 10 91.7 222 15 3600 254T 230/460 RGZEESD Ball 1LE29722BA116AA3 1329 SA-7EXSD 17 91 251 15 3600 254T 575 RGZEESD Ball 1LE29722BA113AA3 1329 SA-7EXSD 13.6 91 251 15 1800 254T 230/460 RGZEESD Ball 1LE29722BB116AA3 1306 SA-7EXSD 19 92.4 315 15 1800 254T 575 RGZEESD Ball 1LE29722BB113AA3 1306 SA-7EXSD 15.2 92.4 315 15 1200 284T 230/460 RGZEESD Ball 1LE29722CC116AA3 2222 SA-7EXSD 21 91.7 400 15 1200 284T 575 RGZEESD Ball 1LE29722CC113AA3 2222 SA-7EXSD 16.8 91.7 400 20 3600 256T 230/460 RGZEESD Ball 1LE29722BA216AA3 1646 SA-7EXSD 23 91 275 20 3600 256T 575 RGZEESD Ball 1LE29722BA213AA3 1646 SA-7EXSD 18.4 91 275 20 1800 256T 230/460 RGZEESD Ball 1LE29722BB216AA3 1627 SA-7EXSD 24 93 340 20 1800 256T 575 RGZEESD Ball 1LE29722BB213AA3 1627 SA-7EXSD 19.2 93 340 20 1200 286T 230/460 RGZEESD Ball 1LE29722CC216AA3 2707 SA-7EXSD 27 91.7 465 20 1200 286T 575 RGZEESD Ball 1LE29722CC213AA3 2707 SA-7EXSD 21.6 91.7 465 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZEESD motors will be discontinued when present stock is depleted Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model 3-28 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC RGZEESD HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency FL Amps* FL Nom. Eff. (%) Weight (lbs) 25 3600 284TS 460 RGZEESD Ball 1LE29722DA112AA3 2029 SA-7EXSD 29 91.7 415 25 3600 284TS 575 RGZEESD Ball 1LE29722DA113AA3 2029 SA-7EXSD 23.2 91.7 415 25 1800 284TS 460 RGZEESD Ball 1LE29722DB112AA3 1936 SA-7EXSD 30 93.6 445 25 1800 284T 460 RGZEESD Ball 1LE29722CB112AA3 1936 SA-7EXSD 30 93.6 445 25 1800 284TS 575 RGZEESD Ball 1LE29722DB113AA3 1936 SA-7EXSD 24 93.6 445 25 1800 284T 575 RGZEESD Ball 1LE29722CB113AA3 1936 SA-7EXSD 24 93.6 445 25 1200 324T 460 RGZEESD Ball 1LE29723AC112AA3 3189 SA-7EXSD 33 93 640 25 1200 324T 575 RGZEESD Ball 1LE29723AC113AA3 3189 SA-7EXSD 26.4 93 640 30 3600 286TS 460 RGZEESD Ball 1LE29722DA212AA3 2369 SA-7EXSD 34 91.7 430 30 3600 286TS 575 RGZEESD Ball 1LE29722DA213AA3 2369 SA-7EXSD 27.2 91.7 430 30 1800 286TS 460 RGZEESD Ball 1LE29722DB212AA3 2253 SA-7EXSD 35 93.6 465 30 1800 286T 460 RGZEESD Ball 1LE29722CB212AA3 2253 SA-7EXSD 35 93.6 465 30 1800 286TS 575 RGZEESD Ball 1LE29722DB213AA3 2253 SA-7EXSD 28 93.6 465 30 1800 286T 575 RGZEESD Ball 1LE29722CB213AA3 2253 SA-7EXSD 28 93.6 465 30 1200 326T 460 RGZEESD Ball 1LE29723AC212AA3 3778 SA-7EXSD 39 93 675 30 1200 326T 575 RGZEESD Ball 1LE29723AC213AA3 3778 SA-7EXSD 31.2 93 675 40 3600 324TS 460 RGZEESD Ball 1LE29723BA112AA3 3125 SA-7EXSD 45 93.6 575 40 3600 324TS 575 RGZEESD Ball 1LE29723BA113AA3 3125 SA-7EXSD 36 93.6 575 40 1800 324TS 460 RGZEESD Ball 1LE29723BB112AA3 2992 SA-7EXSD 46 94.1 666 40 1800 324T 460 RGZEESD Ball 1LE29723AB112AA3 2992 SA-7EXSD 46 94.1 666 40 1800 324TS 575 RGZEESD Ball 1LE29723BB113AA3 2992 SA-7EXSD 36.8 94.1 666 40 1800 324T 575 RGZEESD Ball 1LE29723AB113AA3 2992 SA-7EXSD 36.8 94.1 666 40 1200 364T 460 RGZEESD Ball 1LE29723CC112AA3 5123 SA-7EXSD 49 94.1 863 40 1200 364T 575 RGZEESD Ball 1LE29723CC113AA3 5123 SA-7EXSD 39.2 94.1 863 50 3600 326TS 460 RGZEESD Ball 1LE29723BA212AA3 4043 SA-7EXSD 55 93.6 610 50 3600 326TS 575 RGZEESD Ball 1LE29723BA213AA3 4043 SA-7EXSD 44 93.6 610 50 1800 326TS 460 RGZEESD Ball 1LE29723BB212AA3 3675 SA-7EXSD 58 94.5 700 50 1800 326T 460 RGZEESD Ball 1LE29723AB212AA3 3675 SA-7EXSD 58 94.5 700 50 1800 326TS 575 RGZEESD Ball 1LE29723BB213AA3 3675 SA-7EXSD 46.4 94.5 700 50 1800 326T 575 RGZEESD Ball 1LE29723AB213AA3 3675 SA-7EXSD 46.4 94.5 700 50 1200 365T 460 RGZEESD Ball 1LE29723CC212AA3 5882 SA-7EXSD 62 94.1 900 50 1200 365T 575 RGZEESD Ball 1LE29723CC213AA3 5882 SA-7EXSD 49.6 94.1 900 60 3600 364TS 460 RGZEESD Ball 1LE29723DA112AA3 5318 SA-7EXSD 68 93.6 717 60 3600 364TS 575 RGZEESD Ball 1LE29723DA113AA3 5318 SA-7EXSD 54.4 93.6 717 60 1800 364TS 460 RGZEESD Ball 1LE29723DB112AA3 5272 SA-7EXSD 68 95 930 60 1800 364T 460 RGZEESD Ball 1LE29723CB112AA3 5272 SA-7EXSD 68 95 930 60 1800 364TS 575 RGZEESD Ball 1LE29723DB113AA3 5272 SA-7EXSD 54.4 95 930 60 1800 364T 575 RGZEESD Ball 1LE29723CB113AA3 5272 SA-7EXSD 54.4 95 930 60 1200 404T 460 RGZEESD Ball 1LE29724AC112AA3 6892 SA-7EXSD 74 94.5 1100 60 1200 404T 575 RGZEESD Ball 1LE29724AC113AA3 6892 SA-7EXSD 59.2 94.5 1100 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZEESD motors will be discontinued when present stock is depleted DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 3-29 Dimensions

- TEFC Introduction General Purpose RGZEESD HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. NEMA Premium Efficiency FL Amps* FL Nom. Eff. (%) Weight (lbs) 75 3600 365TS 460 RGZEESD Ball 1LE29723DA212AA3 6678 SA-7EXSD 85 94.1 815 75 3600 365TS 575 RGZEESD Ball 1LE29723DA213AA3 6678 SA-7EXSD 68 94.1 815 75 1800 365TS 460 RGZEESD Ball 1LE29723DB212AA3 6683 SA-7EXSD 85 95.4 1000 75 1800 365T 460 RGZEESD Ball 1LE29723CB212AA3 6683 SA-7EXSD 85 95.4 1000 75 1800 365TS 575 RGZEESD Ball 1LE29723DB213AA3 6683 SA-7EXSD 68 95.4 1000 75 1800 365T 575 RGZEESD Ball 1LE29723CB213AA3 6683 SA-7EXSD 68 95.4 1000 75 1200 405T 460 RGZEESD Ball 1LE29724AC212AA3 8114 SA-7EXSD 93 94.5 1150 75 1200 405T 575 RGZEESD Ball 1LE29724AC213AA3 8114 SA-7EXSD 74.4 94.5 1150 100 3600 405TS 460 RGZEESD Ball 1LE29724BA212AA3 8949 SA-7EXSD 108 94.1 1100 100 3600 405TS 575 RGZEESD Ball 1LE29724BA213AA3 8949 SA-7EXSD 86.4 94.1 1100 100 1800 405TS 460 RGZEESD Ball 1LE29724BB212AA3 8257 SA-7EXSD 113 95.4 1160 100 1800 405T 460 RGZEESD Ball 1LE29724AB212AA3 8257 SA-7EXSD 113 95.4 1160 100 1800 405TS 575 RGZEESD Ball 1LE29724BB213AA3 8257 SA-7EXSD 90.4 95.4 1160 100 1800 405T 575 RGZEESD Ball 1LE29724AB213AA3 8257 SA-7EXSD 90.4 95.4 1160 100 1200 444TS 460 RGZEESD Ball 1LE29724DC112AA3 11090 SA-7EXSD 117 95 1545 100 1200 444T 460 RGZEESD Roller 1LE29724CC112AA3 11090 SA-7EXSD 117 95 1545 100 1200 B444T 460 RGZEESD Ball 1LE29724EC112AA3 11090 SA-7EXSD 117 95 1545 100 1200 444TS 575 RGZEESD Ball 1LE29724DC113AA3 11090 SA-7EXSD 93.6 95 1545 100 1200 444T 575 RGZEESD Roller 1LE29724CC113AA3 11090 SA-7EXSD 93.6 95 1545 100 1200 B444T 575 RGZEESD Ball 1LE29724EC113AA3 11090 SA-7EXSD 93.6 95 1545 125 3600 444TS 460 RGZEESD Ball 1LE29724DA112AA3 11697 SA-7EXSD 138 95 1454 125 3600 444TS 575 RGZEESD Ball 1LE29724DA113AA3 11697 SA-7EXSD 110.4 95 1454 125 1800 444TS 460 RGZEESD Ball 1LE29724DB112AA3 10870 SA-7EXSD 143 95.4 1600 125 1800 444T 460 RGZEESD Roller 1LE29724CB112AA3 10870 SA-7EXSD 143 95.4 1600 125 1800 B444T 460 RGZEESD Ball 1LE29724EB112AA3 10870 SA-7EXSD 143 95.4 1600 125 1800 444TS 575 RGZEESD Ball 1LE29724DB113AA3 10870 SA-7EXSD 114.4 95.4 1600 125 1800 444T 575 RGZEESD Roller 1LE29724CB113AA3 10870 SA-7EXSD 114.4 95.4 1600 125 1800 B444T 575 RGZEESD Ball 1LE29724EB113AA3 10870 SA-7EXSD 114.4 95.4 1600 125 1200 445TS 460 RGZEESD Ball 1LE29724DC212AA3 13621 SA-7EXSD 144 95 1720 125 1200 445T 460 RGZEESD Roller 1LE29724CC212AA3 13621 SA-7EXSD 144 95 1720 125 1200 B445T 460 RGZEESD Ball 1LE29724EC212AA3 13621 SA-7EXSD 144 95 1720 125 1200 445TS 575 RGZEESD Ball 1LE29724DC213AA3 13621 SA-7EXSD 115.2 95 1720 125 1200 445T 575 RGZEESD Roller 1LE29724CC213AA3 13621 SA-7EXSD 115.2 95 1720 125 1200 B445T 575 RGZEESD Ball 1LE29724EC213AA3 13621 SA-7EXSD 115.2 95 1720 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZEESD motors will be discontinued when present stock is depleted Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model Dimensions Duty Duty Purpose 3-30 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

- TEFC RGZEESD HP RPM Frame Voltage Type DOE#CC032A DE Bearing List Price $ Mult. Sym. NEMA Premium Efficiency FL Amps* FL Nom. Eff. (%) Weight (lbs) 150 3600 445TS 460 RGZEESD Ball 1LE29724DA212AA3 14052 SA-7EXSD 164 95 1615 150 3600 445TS 575 RGZEESD Ball 1LE29724DA213AA3 14052 SA-7EXSD 131.2 95 1615 150 1800 445TS 460 RGZEESD Ball 1LE29724DB212AA3 12637 SA-7EXSD 170 95.8 1710 150 1800 445T 460 RGZEESD Roller 1LE29724CB212AA3 12637 SA-7EXSD 170 95.8 1710 150 1800 B445T 460 RGZEESD Ball 1LE29724EB212AA3 12637 SA-7EXSD 170 95.8 1710 150 1800 445TS 575 RGZEESD Ball 1LE29724DB213AA3 12637 SA-7EXSD 136 95.8 1710 150 1800 445T 575 RGZEESD Roller 1LE29724CB213AA3 12637 SA-7EXSD 136 95.8 1710 150 1800 B445T 575 RGZEESD Ball 1LE29724EB213AA3 12637 SA-7EXSD 136 95.8 1710 150 1200 447TS 460 RGZEESD Ball 1LE29724DC312AA3 15240 SA-7EXSD 172 95.8 1995 150 1200 447T 460 RGZEESD Roller 1LE29724CC312AA3 15240 SA-7EXSD 172 95.8 1995 150 1200 B447T 460 RGZEESD Ball 1LE29724EC312AA3 15240 SA-7EXSD 172 95.8 1995 150 1200 447TS 575 RGZEESD Ball 1LE29724DC313AA3 15240 SA-7EXSD 137.6 95.8 1995 150 1200 447T 575 RGZEESD Roller 1LE29724CC313AA3 15240 SA-7EXSD 137.6 95.8 1995 150 1200 B447T 575 RGZEESD Ball 1LE29724EC313AA3 15240 SA-7EXSD 137.6 95.8 1995 200 3600 447TS 460 RGZEESD Ball 1LE29724DA312AA3 17776 SA-7EXSD 216 95.4 1890 200 3600 447TS 575 RGZEESD Ball 1LE29724DA313AA3 17776 SA-7EXSD 172.8 95.4 1890 200 1800 447TS 460 RGZEESD Ball 1LE29724DB312AA3 15371 SA-7EXSD 226 96.2 2035 200 1800 447T 460 RGZEESD Roller 1LE29724CB312AA3 15371 SA-7EXSD 226 96.2 2035 200 1800 B447T 460 RGZEESD Ball 1LE29724EB312AA3 15371 SA-7EXSD 226 96.2 2035 200 1800 447TS 575 RGZEESD Ball 1LE29724DB313AA3 15371 SA-7EXSD 180.8 96.2 2035 200 1800 447T 575 RGZEESD Roller 1LE29724CB313AA3 15371 SA-7EXSD 180.8 96.2 2035 200 1800 B447T 575 RGZEESD Ball 1LE29724EB313AA3 15371 SA-7EXSD 180.8 96.2 2035 200 1200 449TS 460 RGZEESD Ball 1LE29724DC512AA3 18656 SA-7EXSD 227 95.8 2425 200 1200 449T 460 RGZEESD Roller 1LE29724CC512AA3 18656 SA-7EXSD 227 95.8 2425 200 1200 B449T 460 RGZEESD Ball 1LE29724EC512AA3 18656 SA-7EXSD 227 95.8 2425 200 1200 449TS 575 RGZEESD Ball 1LE29724DC513AA3 18656 SA-7EXSD 181.6 95.8 2425 200 1200 449T 575 RGZEESD Roller 1LE29724CC513AA3 18656 SA-7EXSD 181.6 95.8 2425 200 1200 B449T 575 RGZEESD Ball 1LE29724EC513AA3 18656 SA-7EXSD 181.6 95.8 2425 250 3600 449TS 460 RGZEESD Ball 1LE29724DA512AA3 22419 SA-7EXSD 269 95.8 2272 250 3600 449TS 575 RGZEESD Ball 1LE29724DA513AA3 22419 SA-7EXSD 215.2 95.8 2272 250 1800 449TS 460 RGZEESD Ball 1LE29724DB512AA3 19284 SA-7EXSD 281 96.2 2425 250 1800 449T 460 RGZEESD Roller 1LE29724CB512AA3 19284 SA-7EXSD 281 96.2 2425 250 1800 B449T 460 RGZEESD Ball 1LE29724EB512AA3 19284 SA-7EXSD 281 96.2 2425 250 1800 449TS 575 RGZEESD Ball 1LE29724DB513AA3 19284 SA-7EXSD 224.8 96.2 2425 250 1800 449T 575 RGZEESD Roller 1LE29724CB513AA3 19284 SA-7EXSD 224.8 96.2 2425 250 1800 B449T 575 RGZEESD Ball 1LE29724EB513AA3 19284 SA-7EXSD 224.8 96.2 2425 250 1200 449TS 460 RGZEESD Ball 1LE29724DC612AA3 20301 SA-7EXSD 281 95.8 2390 250 1200 449T 460 RGZEESD Roller 1LE29724CC612AA3 20301 SA-7EXSD 281 95.8 2390 250 1200 B449T 460 RGZEESD Ball 1LE29724EC612AA3 20301 SA-7EXSD 281 95.8 2390 250 1200 449TS 575 RGZEESD Ball 1LE29724DC613AA3 20301 SA-7EXSD 224.8 95.8 2390 250 1200 449T 575 RGZEESD Roller 1LE29724CC613AA3 20301 SA-7EXSD 224.8 95.8 2390 250 1200 B449T 575 RGZEESD Ball 1LE29724EC613AA3 20301 SA-7EXSD 224.8 95.8 2390 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZEESD motors will be discontinued when present stock is depleted Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-31 Introduction General Purpose Duty Duty Purpose Dimensions

- TEFC RGZEESD HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. NEMA Premium Efficiency FL Amps* FL Nom. Eff. (%) Weight (lbs) 300 3600 449TS 460 RGZEESD Ball 1LE29724DA612AA3 27898 SA-7EXSD 323 95.8 2200 300 3600 449TS 575 RGZEESD Ball 1LE29724DA613AA3 27898 SA-7EXSD 258.4 95.8 2200 300 1800 449TS 460 RGZEESD Ball 1LE29724DB612AA3 20445 SA-7EXSD 346 96.2 3130 300 1800 449T 460 RGZEESD Roller 1LE29724CB612AA3 20445 SA-7EXSD 346 96.2 3130 300 1800 B449T 460 RGZEESD Ball 1LE29724EB612AA3 20445 SA-7EXSD 346 96.2 3130 300 1800 449TS 575 RGZEESD Ball 1LE29724DB613AA3 20445 SA-7EXSD 276.8 96.2 3130 300 1800 449T 575 RGZEESD Roller 1LE29724CB613AA3 20445 SA-7EXSD 276.8 96.2 3130 300 1800 B449T 575 RGZEESD Ball 1LE29724EB613AA3 20445 SA-7EXSD 276.8 96.2 3130 300 1200 S449LS 460 RGZEESD Roller 1LE29724FC112AA3 37844 SA-7EXSD 342 95.8 3240 300 1200 S449LS 575 RGZEESD Roller 1LE29724FC113AA3 37844 SA-7EXSD 273.6 95.8 3240 350 3600 S449SS 460 RGZEESD Ball 1LE29724GA112AA3 35044 SA-7EXSD 372 95.8 2890 350 3600 S449SS 575 RGZEESD Ball 1LE29724GA113AA3 35044 SA-7EXSD 297.6 95.8 2890 350 1800 S449SS 460 RGZEESD Ball 1LE29724GB212AA3 32449 SA-7EXSD 392 96.2 3190 350 1800 S449LS 460 RGZEESD Roller 1LE29724FB212AA3 32449 SA-7EXSD 392 96.2 3190 350 1800 S449SS 575 RGZEESD Ball 1LE29724GB213AA3 32449 SA-7EXSD 313.6 96.2 3190 350 1800 S449LS 575 RGZEESD Roller 1LE29724FB213AA3 32449 SA-7EXSD 313.6 96.2 3190 400 3600 S449SS 460 RGZEESD Ball 1LE29724GA312AA3 39331 SA-7EXSD 422 95.8 3065 400 3600 S449SS 575 RGZEESD Ball 1LE29724GA313AA3 39331 SA-7EXSD 337.6 95.8 3065 400 1800 S449SS 460 RGZEESD Ball 1LE29724GB312AA3 36427 SA-7EXSD 454 96.2 3240 400 1800 S449LS 460 RGZEESD Roller 1LE29724FB312AA3 36427 SA-7EXSD 454 96.2 3240 400 1800 S449SS 575 RGZEESD Ball 1LE29724GB313AA3 36427 SA-7EXSD 363.2 96.2 3240 400 1800 S449LS 575 RGZEESD Roller 1LE29724FB313AA3 36427 SA-7EXSD 363.2 96.2 3240 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZEESD motors will be discontinued when present stock is depleted Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model Dimensions Introduction General Purpose Duty Duty Purpose 3-32 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

/ IEEE 841 - TEFC severe duty/ieee 841 TEFC motors are available in two configurations they exceed NEMA Premium efficiency with our exclusive, leading-edge, die cast copper rotor design or meet NEMA Premium efficiency with our die cast aluminum rotor design. They also exceed IEEE 841-2001 standards for high performance, rugged construction and long service life for the most demanding applications. They are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/ chemical applications. Specifications 1 to 400 HP 1.15 service factor, 40ºC ambient 3600, 1800, 1200 or 900 RPM 3-phase, 60 Hz; 460 and 575 volt operation Meets or exceeds NEMA Premium efficiency standards Class F insulation, Class B temperature rise @ 1.0SF NEMA design B (except as noted), continuous duty 0.06 IPS vibration / 0.005" foot flatness Meets IP55 & IEEE 45 143T to S449T Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation T-drains Provided. Lifting eyebolts are included with motors > 75 lbs. Specifications table begins on the next page Rotor Frame size 143T 256T offer Siemens exclusive, leading edge, die cast copper rotor design which provides industry leading efficiencies, exceeding NEMA Premium. Die cast aluminum rotor motors, which meet the NEMA Premium efficiency levels, are dynamically balanced for extended bearing life. Rotor assembly includes a high-strength carbon steel (C1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses. Insulation Proprietary inverterrated Class F non-hygroscopic insulation system with NEMA Class B temperature rise @ 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. This insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, nonsparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized single shielded with cast iron inner caps. Alemite grease inlet fittings and automatic grease relief fittings for ease of routine maintenance. Inpro/Seal bearing isolators are standard on bearing housings. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency Lubrication A specially formulated, high temperature tested, polyurea based grease is used to provide more than four times the lubrication life of other greases. Seamless, grease filled lubrication pipes are included. Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. A ground lug is provided. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, polycarbonate fan, zinc-plated hardware, epoxy enamel paint and embossed stainless steel nameplate resist rust and corrosion. Modifiable & Siemens motors are available with a wide variety of modifications & custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 3-33 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions / IEEE 841 - TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 3600 143T 460 Ball 1LE24211AA112AA3 512 SD3 1.4 77 75 1 3600 143T 575 Ball 1LE24211AA113AA3 512 SD3 1.12 77 75 1 1800 143T 460 Ball 1LE24211AB212AA3 496 SD3 1.4 85.5 76 1 1800 143T 575 Ball 1LE24211AB213AA3 496 SD3 1.12 85.5 76 1 1200 145T 460 Ball 1LE24211AC312AA3 584 SD3 1.6 82.5 77 1 1200 145T 575 Ball 1LE24211AC313AA3 584 SD3 1.28 82.5 77 1 900 182T 460 Ball 1LE24211CD112AA3 948 SD3 2.1 81.5 106 1 900 182T 575 Ball 1LE24211CD113AA3 948 SD3 1.64 81.5 106 1.5 3600 143T 460 Ball 1LE24211AA212AA3 513 SD3 2 84 70 1.5 3600 143T 575 Ball 1LE24211AA213AA3 513 SD3 1.6 84 70 1.5 1800 145T 460 Ball 1LE24211AB312AA3 535 SD3 2 86.5 80 1.5 1800 145T 575 Ball 1LE24211AB313AA3 535 SD3 1.6 86.5 80 1.5 1200 182T 460 Ball 1LE24211CC112AA3 655 SD3 2.5 87.5 113 1.5 1200 182T 575 Ball 1LE24211CC113AA3 655 SD3 2 87.5 113 1.5 900 184T 460 Ball 1LE24211CD312AA3 1119 SD3 3 82.5 119 1.5 900 184T 575 Ball 1LE24211CD313AA3 1119 SD3 2.4 82.5 119 2 3600 145T 460 Ball 1LE24211AA312AA3 589 SD3 2.5 85.5 72 2 3600 145T 575 Ball 1LE24211AA313AA3 589 SD3 2 85.5 72 2 1800 145T 460 Ball 1LE24211AB412AA3 572 SD3 2.8 86.5 80 2 1800 145T 575 Ball 1LE24211AB413AA3 572 SD3 2.24 86.5 80 2 1200 184T 460 Ball 1LE24211CC312AA3 697 SD3 3.2 88.5 122 2 1200 184T 575 Ball 1LE24211CC313AA3 697 SD3 2.56 88.5 122 2 900 213T 460 Ball 1LE24212AD112AA3 1317 SD3 3.3 84 145 2 900 213T 575 Ball 1LE24212AD113AA3 1317 SD3 2.64 84 145 3 3600 182T 460 Ball 1LE24211CA112AA3 617 SD3 3.9 86.5 107 3 3600 182T 575 Ball 1LE24211CA113AA3 617 SD3 3.12 86.5 107 3 1800 182T 460 Ball 1LE24211CB112AA3 591 SD3 4 89.5 118 3 1800 182T 575 Ball 1LE24211CB113AA3 591 SD3 3.2 89.5 118 3 1200 213T 460 Ball 1LE24212AC112AA3 879 SD3 4.6 89.5 164 3 1200 213T 575 Ball 1LE24212AC113AA3 879 SD3 3.68 89.5 164 3 900 215T 460 Ball 1LE24212AD212AA3 1671 SD3 4.8 85.5 160 3 900 215T 575 Ball 1LE24212AD213AA3 1671 SD3 3.84 85.5 160 5 3600 184T 460 Ball 1LE24211CA312AA3 751 SD3 6 88.5 118 5 3600 184T 575 Ball 1LE24211CA313AA3 751 SD3 4.8 88.5 118 5 1800 184T 460 Ball 1LE24211CB312AA3 673 SD3 6.9 89.5 124 5 1800 184T 575 Ball 1LE24211CB313AA3 673 SD3 5.52 89.5 124 5 1200 215T 460 Ball 1LE24212AC212AA3 1157 SD3 6.6 89.5 176 5 1200 215T 575 Ball 1LE24212AC213AA3 1157 SD3 5.28 89.5 176 5 900 254T 460 Ball 1LE24212BD112AA3 2220 SD3 8.8 86.5 247 5 900 254T 575 Ball 1LE24212BD113AA3 2220 SD3 7.04 86.5 247 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZEESDX stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model 3-34 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

/ IEEE 841 - TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 7.5 3600 213T 460 Ball 1LE24212AA112AA3 926 SD3 9 89.5 160 7.5 3600 213T 575 Ball 1LE24212AA113AA3 926 SD3 7.2 89.5 160 7.5 1800 213T 460 Ball 1LE24212AB112AA3 899 SD3 10 91.7 191 7.5 1800 213T 575 Ball 1LE24212AB113AA3 899 SD3 8 91.7 191 7.5 1200 254T 460 Ball 1LE24212BC112AA3 1488 SD3 10.5 91 292 7.5 1200 254T 575 Ball 1LE24212BC113AA3 1488 SD3 8.4 91 292 7.5 900 256T 460 Ball 1LE24212BD212AA3 2800 SD3 13 87.5 279 7.5 900 256T 575 Ball 1LE24212BD213AA3 2800 SD3 10.4 87.5 279 10 3600 215T 460 Ball 1LE24212AA212AA3 1064 SD3 11.5 90.2 174 10 3600 215T 575 Ball 1LE24212AA213AA3 1064 SD3 9.2 90.2 174 10 1800 215T 460 Ball 1LE24212AB212AA3 1076 SD3 13 91.7 197 10 1800 215T 575 Ball 1LE24212AB213AA3 1076 SD3 10.4 91.7 197 10 1200 256T 460 Ball 1LE24212BC212AA3 1850 SD3 13 91 288 10 1200 256T 575 Ball 1LE24212BC213AA3 1850 SD3 10.4 91 288 10 900 284T 460 Ball 1LE24212CD112AA3 2864 SD3 15 90.2 362 10 900 284T 575 Ball 1LE24212CD113AA3 2864 SD3 12 90.2 362 15 3600 254T 460 Ball 1LE24212BA112AA3 1444 SD3 17.5 91 287 15 3600 254T 575 Ball 1LE24212BA113AA3 1444 SD3 14 91 287 15 1800 254T 460 Ball 1LE24212BB112AA3 1418 SD3 19.5 92.4 289 15 1800 254T 575 Ball 1LE24212BB113AA3 1418 SD3 15.6 92.4 289 15 1200 284T 460 Ball 1LE24212CC112AA3 2307 SD3 21 91.7 400 15 1200 284T 575 Ball 1LE24212CC113AA3 2307 SD3 16.8 91.7 400 15 900 286T 460 Ball 1LE24212CD212AA3 3664 SD3 23 90.2 420 15 900 286T 575 Ball 1LE24212CD213AA3 3664 SD3 18.4 90.2 420 20 3600 256T 460 Ball 1LE24212BA212AA3 1772 SD3 23 91 323 20 3600 256T 575 Ball 1LE24212BA213AA3 1772 SD3 18.4 91 323 20 1800 256T 460 Ball 1LE24212BB212AA3 1828 SD3 26 93 322 20 1800 256T 575 Ball 1LE24212BB213AA3 1828 SD3 20.8 93 322 20 1200 286T 460 Ball 1LE24212CC212AA3 2812 SD3 27 91.7 465 20 1200 286T 575 Ball 1LE24212CC213AA3 2812 SD3 21.6 91.7 465 20 900 324T 460 Ball 1LE24213AD112AA3 4479 SD3 31 91 570 20 900 324T 575 Ball 1LE24213AD113AA3 4479 SD3 24.8 91 570 25 3600 284TS 460 Ball 1LE24212DA112AA3 2107 SD3 29 91.7 415 25 3600 284TS 575 Ball 1LE24212DA113AA3 2107 SD3 23.2 91.7 415 25 1800 284T 460 Ball 1LE24212CB112AA3 2012 SD3 30 93.6 445 25 1800 284T 575 Ball 1LE24212CB113AA3 2012 SD3 24 93.6 445 25 1800 284TS 460 Ball 1LE24212DB112AA3 2012 SD3 30 93.6 445 25 1800 284TS 575 Ball 1LE24212DB113AA3 2012 SD3 24 93.6 445 25 1200 324T 460 Ball 1LE24213AC112AA3 3408 SD3 33 93 640 25 1200 324T 575 Ball 1LE24213AC113AA3 3408 SD3 26.4 93 640 25 900 326T 460 Ball 1LE24213AD212AA3 5208 SD3 41 90.2 582 25 900 326T 575 Ball 1LE24213AD213AA3 5208 SD3 32.8 90.2 582 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZEESDX stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A DOE#CC032A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-35 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions / IEEE 841 - TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 30 3600 286TS 460 Ball 1LE24212DA212AA3 2461 SD3 34 91.7 430 30 3600 286TS 575 Ball 1LE24212DA213AA3 2461 SD3 27.2 91.7 430 30 1800 286T 460 Ball 1LE24212CB212AA3 2340 SD3 35 93.6 465 30 1800 286T 575 Ball 1LE24212CB213AA3 2340 SD3 28 93.6 465 30 1800 286TS 460 Ball 1LE24212DB212AA3 2340 SD3 35 93.6 465 30 1800 286TS 575 Ball 1LE24212DB213AA3 2340 SD3 28 93.6 465 30 1200 326T 460 Ball 1LE24213AC212AA3 3926 SD3 39 93 675 30 1200 326T 575 Ball 1LE24213AC213AA3 3926 SD3 31.2 93 675 30 900 364T 460 Ball 1LE24213CD112AA3 6164 SD3 47 91.7 740 30 900 364T 575 Ball 1LE24213CD113AA3 6164 SD3 37.6 91.7 740 40 3600 324TS 460 Ball 1LE24213BA112AA3 3246 SD3 45 93.6 575 40 3600 324TS 575 Ball 1LE24213BA113AA3 3246 SD3 36 93.6 575 40 1800 324T 460 Ball 1LE24213AB112AA3 3108 SD3 46 94.1 666 40 1800 324T 575 Ball 1LE24213AB113AA3 3108 SD3 36.8 94.1 666 40 1800 324TS 460 Ball 1LE24213BB112AA3 3108 SD3 46 94.1 666 40 1800 324TS 575 Ball 1LE24213BB113AA3 3108 SD3 36.8 94.1 666 40 1200 364T 460 Ball 1LE24213CC112AA3 5321 SD3 49 94.1 863 40 1200 364T 575 Ball 1LE24213CC113AA3 5321 SD3 39.2 94.1 863 40 900 365T 460 Ball 1LE24213CD212AA3 7452 SD3 63 91.7 840 40 900 365T 575 Ball 1LE24213CD213AA3 7452 SD3 50.4 91.7 840 50 3600 326TS 460 Ball 1LE24213BA212AA3 4127 SD3 55 93.6 610 50 3600 326TS 575 Ball 1LE24213BA213AA3 4127 SD3 44 93.6 610 50 1800 326T 460 Ball 1LE24213AB212AA3 3784 SD3 58 94.5 700 50 1800 326T 575 Ball 1LE24213AB213AA3 3784 SD3 46.4 94.5 700 50 1800 326TS 460 Ball 1LE24213BB212AA3 3784 SD3 58 94.5 700 50 1800 326TS 575 Ball 1LE24213BB213AA3 3784 SD3 46.4 94.5 700 50 1200 365T 460 Ball 1LE24213CC212AA3 6056 SD3 62 94.1 900 50 1200 365T 575 Ball 1LE24213CC213AA3 6056 SD3 49.6 94.1 900 50 900 404T 460 Ball 1LE24214AD112AA3 8674 SD3 67 92.4 1116 50 900 404T 575 Ball 1LE24214AD113AA3 8674 SD3 53.6 92.4 1116 60 3600 364TS 460 Ball 1LE24213DA112AA3 5476 SD3 68 93.6 717 60 3600 364TS 575 Ball 1LE24213DA113AA3 5476 SD3 54.4 93.6 717 60 1800 364T 460 Ball 1LE24213CB112AA3 5381 SD3 68 95 930 60 1800 364T 575 Ball 1LE24213CB113AA3 5381 SD3 54.4 95 930 60 1800 364TS 460 Ball 1LE24213DB112AA3 5381 SD3 68 95 930 60 1800 364TS 575 Ball 1LE24213DB113AA3 5381 SD3 54.4 95 930 60 1200 404T 460 Ball 1LE24214AC112AA3 6911 SD3 74 94.5 1100 60 1200 404T 575 Ball 1LE24214AC113AA3 6911 SD3 59.2 94.5 1100 60 900 405T 460 Ball 1LE24214AD212AA3 9733 SD3 78 92.4 1182 60 900 405T 575 Ball 1LE24214AD213AA3 9733 SD3 62.4 92.4 1182 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZEESDX stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model 3-36 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

/ IEEE 841 - TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 75 3600 365TS 460 Ball 1LE24213DA212AA3 6876 SD3 85 94.1 815 75 3600 365TS 575 Ball 1LE24213DA213AA3 6876 SD3 68 94.1 815 75 1800 365T 460 Ball 1LE24213CB212AA3 6703 SD3 85 95.4 1000 75 1800 365T 575 Ball 1LE24213CB213AA3 6703 SD3 68 95.4 1000 75 1800 365TS 460 Ball 1LE24213DB212AA3 6703 SD3 85 95.4 1000 75 1800 365TS 575 Ball 1LE24213DB213AA3 6703 SD3 68 95.4 1000 75 1200 405T 460 Ball 1LE24214AC212AA3 8065 SD3 93 94.5 1150 75 1200 405T 575 Ball 1LE24214AC213AA3 8065 SD3 74.4 94.5 1150 75 900 444T 460 Roller 1LE24214CD112AA3 12942 SD3 94 93.6 1525 75 900 444TS 460 Ball 1LE24214DD112AA3 12492 SD3 94 93.6 1525 75 900 B444T 460 Ball 1LE24214ED112AA3 12492 SD3 94 93.6 1525 75 900 444T 575 Roller 1LE24214CD113AA3 12942 SD3 75.2 93.6 1525 75 900 444TS 575 Ball 1LE24214DD113AA3 12492 SD3 75.2 93.6 1525 75 900 B444T 575 Ball 1LE24214ED113AA3 12492 SD3 75.2 93.6 1525 100 3600 405TS 460 Ball 1LE24214BA212AA3 9134 SD3 108 94.1 1100 100 3600 405TS 575 Ball 1LE24214BA213AA3 9134 SD3 86.4 94.1 1100 100 1800 405T 460 Ball 1LE24214AB212AA3 8281 SD3 113 95.4 1160 100 1800 405T 575 Ball 1LE24214AB213AA3 8281 SD3 90.4 95.4 1160 100 1800 405TS 460 Ball 1LE24214BB212AA3 8281 SD3 113 95.4 1160 100 1800 405TS 575 Ball 1LE24214BB213AA3 8281 SD3 90.4 95.4 1160 100 1200 444T 460 Roller 1LE24214CC112AA3 11121 SD3 117 95 1545 100 1200 444T 575 Roller 1LE24214CC113AA3 11121 SD3 93.6 95 1545 100 1200 444TS 460 Ball 1LE24214DC112AA3 11121 SD3 117 95 1545 100 1200 444TS 575 Ball 1LE24214DC113AA3 11121 SD3 93.6 95 1545 100 1200 B444T 460 Ball 1LE24214EC112AA3 11121 SD3 117 95 1545 100 1200 B444T 575 Ball 1LE24214EC113AA3 11121 SD3 93.6 95 1545 100 900 445T 460 Roller 1LE24214CD212AA3 15860 SD3 123 94.1 1697 100 900 445TS 460 Ball 1LE24214DD212AA3 15860 SD3 123 94.1 1697 100 900 B445T 460 Ball 1LE24214ED212AA3 15860 SD3 123 94.1 1697 100 900 445T 575 Roller 1LE24214CD213AA3 15860 SD3 98.4 94.1 1697 100 900 445TS 575 Ball 1LE24214DD213AA3 15860 SD3 98.4 94.1 1697 100 900 B445T 575 Ball 1LE24214ED213AA3 15860 SD3 98.4 94.1 1697 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZEESDX stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model Introduction General Purpose Duty Duty Purpose DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 3-37 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions / IEEE 841 - TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 125 3600 444TS 460 Ball 1LE24214DA112AA3 11731 SD3 138 95 1454 125 3600 444TS 575 Ball 1LE24214DA113AA3 11731 SD3 110.4 95 1454 125 1800 444T 460 Roller 1LE24214CB112AA3 10804 SD3 143 95.4 1600 125 1800 444T 575 Roller 1LE24214CB113AA3 10804 SD3 114.4 95.4 1600 125 1800 444TS 460 Ball 1LE24214DB112AA3 10804 SD3 143 95.4 1600 125 1800 444TS 575 Ball 1LE24214DB113AA3 10804 SD3 114.4 95.4 1600 125 1800 B444T 460 Ball 1LE24214EB112AA3 10804 SD3 143 95.4 1600 125 1800 B444T 575 Ball 1LE24214EB113AA3 10804 SD3 114.4 95.4 1600 125 1200 445T 460 Roller 1LE24214CC212AA3 13416 SD3 144 95 1720 125 1200 445T 575 Roller 1LE24214CC213AA3 13416 SD3 115.2 95 1720 125 1200 445TS 460 Ball 1LE24214DC212AA3 13416 SD3 144 95 1720 125 1200 445TS 575 Ball 1LE24214DC213AA3 13416 SD3 115.2 95 1720 125 1200 B445T 460 Ball 1LE24214EC212AA3 13416 SD3 144 95 1720 125 1200 B445T 575 Ball 1LE24214EC213AA3 13416 SD3 115.2 95 1720 125 900 447T 460 Roller 1LE24214CD312AA3 16290 SD3 152 94.1 2018 125 900 447TS 460 Ball 1LE24214DD312AA3 16290 SD3 152 94.1 2018 125 900 B447T 460 Ball 1LE24214ED312AA3 16290 SD3 152 94.1 2018 125 900 447T 575 Roller 1LE24214CD313AA3 16290 SD3 121.6 94.1 2018 125 900 447TS 575 Ball 1LE24214DD313AA3 16290 SD3 121.6 94.1 2018 125 900 B447T 575 Ball 1LE24214ED313AA3 16290 SD3 121.6 94.1 2018 150 3600 445TS 460 Ball 1LE24214DA212AA3 13715 SD3 164 95 1615 150 3600 445TS 575 Ball 1LE24214DA213AA3 13715 SD3 131.2 95 1615 150 1800 445T 460 Roller 1LE24214CB212AA3 12220 SD3 170 95.8 1710 150 1800 445T 575 Roller 1LE24214CB213AA3 12220 SD3 136 95.8 1710 150 1800 445TS 460 Ball 1LE24214DB212AA3 12220 SD3 170 95.8 1710 150 1800 445TS 575 Ball 1LE24214DB213AA3 12220 SD3 136 95.8 1710 150 1800 B445T 460 Ball 1LE24214EB212AA3 12220 SD3 170 95.8 1710 150 1800 B445T 575 Ball 1LE24214EB213AA3 12220 SD3 136 95.8 1710 150 1200 447T 460 Roller 1LE24214CC312AA3 14737 SD3 172 95.8 1995 150 1200 447T 575 Roller 1LE24214CC313AA3 14737 SD3 137.6 95.8 1995 150 1200 447TS 460 Ball 1LE24214DC312AA3 14737 SD3 172 95.8 1995 150 1200 447TS 575 Ball 1LE24214DC313AA3 14737 SD3 137.6 95.8 1995 150 1200 B447T 460 Ball 1LE24214EC312AA3 14737 SD3 172 95.8 1995 150 1200 B447T 575 Ball 1LE24214EC313AA3 14737 SD3 137.6 95.8 1995 150 900 449T 460 Roller 1LE24214CD512AA3 20828 SD3 180 94.1 2480 150 900 449TS 460 Ball 1LE24214DD512AA3 20828 SD3 180 94.1 2480 150 900 B449T 460 Ball 1LE24214ED512AA3 20828 SD3 180 94.1 2480 150 900 449T 575 Roller 1LE24214CD513AA3 20828 SD3 144 94.1 2480 150 900 449TS 575 Ball 1LE24214DD513AA3 20828 SD3 144 94.1 2480 150 900 B449T 575 Ball 1LE24214ED513AA3 20828 SD3 144 94.1 2480 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZEESDX stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model 3-38 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

/ IEEE 841 - TEFC (Aluminum Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DOE#CC032A DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 200 3600 447TS 460 Ball 1LE24214DA312AA3 17200 SD3 216 95.4 1890 200 3600 447TS 575 Ball 1LE24214DA313AA3 17200 SD3 172.8 95.4 1890 200 1800 447T 460 Roller 1LE24214CB312AA3 14863 SD3 226 96.2 2035 200 1800 447T 575 Roller 1LE24214CB313AA3 14863 SD3 180.8 96.2 2035 200 1800 447TS 460 Ball 1LE24214DB312AA3 14863 SD3 226 96.2 2035 200 1800 447TS 575 Ball 1LE24214DB313AA3 14863 SD3 180.8 96.2 2035 200 1800 B447T 460 Ball 1LE24214EB312AA3 14863 SD3 226 96.2 2035 200 1800 B447T 575 Ball 1LE24214EB313AA3 14863 SD3 180.8 96.2 2035 200 1200 449T 460 Roller 1LE24214CC512AA3 17874 SD3 227 95.8 2425 200 1200 449T 575 Roller 1LE24214CC513AA3 17874 SD3 181.6 95.8 2425 200 1200 449TS 460 Ball 1LE24214DC512AA3 17874 SD3 227 95.8 2425 200 1200 449TS 575 Ball 1LE24214DC513AA3 17874 SD3 181.6 95.8 2425 200 1200 B449T 460 Ball 1LE24214EC512AA3 17874 SD3 227 95.8 2425 200 1200 B449T 575 Ball 1LE24214EC513AA3 17874 SD3 181.6 95.8 2425 200 900 S449LS 460 Roller 1LE24214FD112AA3 29684 SD3 240 94.5 3200 200 900 S449LS 575 Roller 1LE24214FD113AA3 29684 SD3 192 94.5 3200 250 3600 449TS 460 Ball 1LE24214DA512AA3 21678 SD3 269 95.8 2272 250 3600 449TS 575 Ball 1LE24214DA513AA3 21678 SD3 215.2 95.8 2272 250 1800 449T 460 Roller 2 1LE24214CB512AA3 18650 SD3 281 96.2 2425 250 1800 449T 575 Roller 2 1LE24214CB513AA3 18650 SD3 224.8 96.2 2425 250 1800 449TS 460 Ball 1 1LE24214DB512AA3 18650 SD3 281 96.2 2425 250 1800 449TS 575 Ball 1 1LE24214DB513AA3 18650 SD3 224.8 96.2 2425 250 1800 B449T 460 Ball 1 1LE24214EB512AA3 18650 SD3 281 96.2 2425 250 1800 B449T 575 Ball 1 1LE24214EB513AA3 18650 SD3 224.8 96.2 2425 250 1200 449T 460 Roller 2 1LE24214CC612AA3 19447 SD3 281 95.8 2390 250 1200 449T 575 Roller 2 1LE24214CC613AA3 19447 SD3 224.8 95.8 2390 250 1200 449TS 460 Ball 1 1LE24214DC612AA3 19447 SD3 281 95.8 2390 250 1200 449TS 575 Ball 1 1LE24214DC613AA3 19447 SD3 224.8 95.8 2390 250 1200 B449T 460 Ball 1 1LE24214EC612AA3 19447 SD3 281 95.8 2390 250 1200 B449T 575 Ball 1 1LE24214EC613AA3 19447 SD3 224.8 95.8 2390 250 900 S449LS 460 Roller 1LE24214FD212AA3 32199 SD3 303 94.5 3220 250 900 S449LS 575 Roller 1LE24214FD213AA3 32199 SD3 242.4 94.5 3220 300 3600 449TS 460 Ball 1 1LE24214DA612AA3 29261 SD3 323 95.8 2200 300 3600 449TS 575 Ball 1 1LE24214DA613AA3 29261 SD3 258.4 95.8 2200 300 1800 S449LS 460 Roller 1,2 1LE24214FB112AA3 26888 SD3 346 96.2 3130 300 1800 S449LS 575 Roller 1,2 1LE24214FB113AA3 26888 SD3 276.8 96.2 3130 300 1800 S449SS 460 Ball 1,2 1LE24214GB112AA3 26888 SD3 346 96.2 3130 300 1800 S449SS 575 Ball 1,2 1LE24214GB113AA3 26888 SD3 276.8 96.2 3130 300 1200 S449LS 460 Roller 1,2 1LE24214FC112AA3 35924 SD3 342 95.8 3240 300 1200 S449SS 460 Ball 1,2 1LE24214GC112AA3 35924 SD3 342 95.8 3240 300 1200 S449LS 575 Roller 1,2 1LE24214FC113AA3 35924 SD3 273.6 95.8 3240 300 1200 S449SS 575 Ball 1,2 1LE24214GC113AA3 35924 SD3 273.6 95.8 3240 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZEESDX stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-39 Introduction General Purpose Duty Duty Purpose Dimensions

/ IEEE 841 - TEFC (Aluminum Rotor) Introduction HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 350 3600 S449SS 460 Ball 1 1LE24214GA112AA3 33257 SD3 372 95.8 2890 350 3600 S449SS 575 Ball 1 1LE24214GA113AA3 33257 SD3 297.6 95.8 2890 350 1800 S449LS 460 Roller 1 1LE24214FB212AA3 30799 SD3 392 96.2 3190 350 1800 S449LS 575 Roller 1 1LE24214FB213AA3 30799 SD3 313.6 96.2 3190 350 1800 S449SS 460 Ball 1 1LE24214GB212AA3 30799 SD3 392 96.2 3190 350 1800 S449SS 575 Ball 1 1LE24214GB213AA3 30799 SD3 313.6 96.2 3190 400 3600 S449SS 460 Ball 1 1LE24214GA312AA3 37300 SD3 422 95.8 3065 400 3600 S449SS 575 Ball 1 1LE24214GA313AA3 37300 SD3 337.6 95.8 3065 400 1800 S449LS 460 Roller 1 1LE24214FB312AA3 34548 SD3 454 96.2 3240 400 1800 S449LS 575 Roller 1 1LE24214FB313AA3 34548 SD3 363.2 96.2 3240 400 1800 S449SS 460 Ball 1 1LE24214GB312AA3 34548 SD3 454 96.2 3240 400 1800 S449SS 575 Ball 1 1LE24214GB313AA3 34548 SD3 363.2 96.2 3240 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Frames 280-440 available after RGZEESDX stock motors are depleted 1 CW Rotation facing opposite drive end 2 NEMA Design A Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model Dimensions General Purpose Duty Duty Purpose 3-40 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

/ IEEE 841 - TEFC (Copper Rotor) HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing NEMA Premium Efficiency Plus List Price $ Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 1 1800 143T 460 Ball 1LE24111AB212AA3 579 SD3 1.5 86.5 81 1 1800 143T 575 Ball 1LE24111AB213AA3 579 SD3 1.2 86.5 81 1 1200 145T 460 Ball 1LE24111AC312AA3 681 SD3 1.6 84 81 1 1200 145T 575 Ball 1LE24111AC313AA3 681 SD3 1.28 84 81 1.5 3600 143T 460 Ball 1LE24111AA212AA3 599 SD3 1.9 87.5 80 1.5 3600 143T 575 Ball 1LE24111AA213AA3 599 SD3 1.52 87.5 80 1.5 1800 145T 460 Ball 1LE24111AB312AA3 624 SD3 2.1 87.5 81 1.5 1800 145T 575 Ball 1LE24111AB313AA3 624 SD3 1.68 87.5 81 2 3600 145T 460 Ball 1LE24111AA312AA3 687 SD3 2.6 88.5 80 2 3600 145T 575 Ball 1LE24111AA313AA3 687 SD3 2.08 88.5 80 2 1800 145T 460 Ball 1LE24111AB412AA3 668 SD3 2.8 87.5 81 2 1800 145T 575 Ball 1LE24111AB413AA3 668 SD3 2.24 87.5 81 3 3600 182T 460 Ball 1LE24111CA112AA3 720 SD3 3.8 89.5 121 3 3600 182T 575 Ball 1LE24111CA113AA3 720 SD3 3.04 89.5 121 3 1800 182T 460 Ball 1LE24111CB112AA3 690 SD3 4 90.2 125 3 1800 182T 575 Ball 1LE24111CB113AA3 690 SD3 3.2 90.2 125 3 1200 213T 460 Ball 1LE24112AC112AA3 1026 SD3 4.3 90.2 170 3 1200 213T 575 Ball 1LE24112AC113AA3 1026 SD3 3.44 90.2 170 5 3600 184T 460 Ball 1LE24111CA312AA3 876 SD3 6.2 90.2 123 5 3600 184T 575 Ball 1LE24111CA313AA3 876 SD3 4.96 90.2 123 5 1800 184T 460 Ball 1LE24111CB312AA3 785 SD3 6.7 90.2 129 5 1800 184T 575 Ball 1LE24111CB313AA3 785 SD3 5.36 90.2 129 5 1200 215T 460 Ball 1LE24112AC212AA3 1349 SD3 6.8 90.2 184 5 1200 215T 575 Ball 1LE24112AC213AA3 1349 SD3 5.44 90.2 184 7.5 3600 213T 460 Ball 1LE24112AA112AA3 1080 SD3 8.5 91.7 191 7.5 3600 213T 575 Ball 1LE24112AA113AA3 1080 SD3 6.8 91.7 191 7.5 1800 213T 460 Ball 1LE24112AB112AA3 1049 SD3 9.5 92.4 198 7.5 1800 213T 575 Ball 1LE24112AB113AA3 1049 SD3 7.6 92.4 198 7.5 1200 254T 460 Ball 1LE24112BC112AA3 1736 SD3 10.5 92.4 336 7.5 1200 254T 575 Ball 1LE24112BC113AA3 1736 SD3 8.4 92.4 336 10 3600 215T 460 Ball 1LE24112AA212AA3 1241 SD3 11.5 91.7 196 10 3600 215T 575 Ball 1LE24112AA213AA3 1241 SD3 9.2 91.7 196 10 1800 215T 460 Ball 1LE24112AB212AA3 1256 SD3 12.5 92.4 206 10 1800 215T 575 Ball 1LE24112AB213AA3 1256 SD3 10 92.4 206 10 1200 256T 460 Ball 1LE24112BC212AA3 2159 SD3 13.5 92.4 337 10 1200 256T 575 Ball 1LE24112BC213AA3 2159 SD3 10.8 92.4 337 15 3600 254T 460 Ball 1LE24112BA112AA3 1684 SD3 17 92.4 309 15 3600 254T 575 Ball 1LE24112BA113AA3 1684 SD3 13.6 92.4 309 15 1800 254T 460 Ball 1LE24112BB112AA3 1654 SD3 19 93 297 15 1800 254T 575 Ball 1LE24112BB113AA3 1654 SD3 15.2 93 297 20 3600 256T 460 Ball 1LE24112BA212AA3 2067 SD3 23 92.4 333 20 3600 256T 575 Ball 1LE24112BA213AA3 2067 SD3 18 92.4 333 20 1800 256T 460 Ball 1LE24112BB212AA3 2133 SD3 25 93.6 341 20 1800 256T 575 Ball 1LE24112BB213AA3 2133 SD3 20 93.6 341 Prices and specifications are subject to change without notice Stock availability subject to sale DOE#CC032A delivery for stocked motors only *FL Amps at 460V or 575V Exceeds Energy Independence & Security Act Efficiency Levels 2010 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 3-41 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose / IEEE 841 - TEFC RGZEESDX RGZEESDX severe duty IEEE 841 TEFC motors meet or exceed NEMA Premium efficiencies. They also exceed IEEE 841-2001 standards for high performance, rugged construction and long service life for the most demanding applications. They are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/ chemical applications. Specifications 25 to 400 HP 1.15 service factor, 40ºC ambient 3600, 1800, 1200 or 900 RPM 3-phase, 60 Hz; 460 and 575 volt operation Meets or exceeds NEMA Premium efficiency standards Class F insulation, Class B temperature rise @ 1.0SF NEMA design B (except as noted), continuous duty 0.06 IPS vibration / 0.005" foot flatness Meets IP55 & IEEE 45 284T to S449 frames Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity & corrosion resistance, equipped with integrally cast feet. Condensation T-drains provided. Lifting eyebolts are included with motors > 75 lbs. Specifications table begins on the next page Rotor A unique, low loss, die cast aluminum rotor. Each rotor assembly is dynamically balanced for extended bearing life, and includes a high-strength carbon steel(c1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses. Insulation Proprietary inverterrated Class F non-hygroscopic insulation system with NEMA Class B temperature rise @ 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. This insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized single shielded with cast iron inner caps. Alemite grease inlet fittings and automatic grease relief fittings for ease of routine maintenance. Inpro/Seal bearing isolators are standard on bearing housings. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 NEMA Premium Efficiency Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. Seamless, grease filled lubrication pipes an automatic grease relief fittings are included. Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. Includes a ground lug. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, polycarbonate fan, zinc-plated hardware, epoxy enamel paint and embossed stainless steel nameplate resist rust and corrosion. Modifiable & Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Dimensions 3-42 2009-2010 Low Voltage AC Selection and Pricing Guide

/ IEEE 841 - TEFC RGZEESDX HP RPM Frame Voltage Type DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 FL Amps* FL Nom. Eff. (%) Weight (lbs) 10 900 284T 460 RGZEESDX Ball 1LE29822CD112AA3 3018 SA-7IEE 15 90.2 362 10 900 284T 575 RGZEESDX Ball 1LE29822CD113AA3 3018 SA-7IEE 12 90.2 362 15 1200 284T 460 RGZEESDX Ball 1LE29822CC112AA3 2431 SA-7IEE 21 91.7 400 15 1200 284T 575 RGZEESDX Ball 1LE29822CC113AA3 2431 SA-7IEE 16.8 91.7 400 15 900 286T 460 RGZEESDX Ball 1LE29822CD212AA3 3860 SA-7IEE 23 90.2 420 15 900 286T 575 RGZEESDX Ball 1LE29822CD213AA3 3860 SA-7IEE 18.4 90.2 420 20 1200 286T 460 RGZEESDX Ball 1LE29822CC212AA3 2963 SA-7IEE 27 91.7 465 20 1200 286T 575 RGZEESDX Ball 1LE29822CC213AA3 2963 SA-7IEE 21.6 91.7 465 20 900 324T 460 RGZEESDX Ball 1LE29823AD112AA3 4719 SA-7IEE 31 91 570 20 900 324T 575 RGZEESDX Ball 1LE29823AD113AA3 4719 SA-7IEE 24.8 91 570 25 3600 284TS 460 RGZEESDX Ball 1LE29822DA112AA3 2220 SA-7IEE 29 91.7 415 25 3600 284TS 575 RGZEESDX Ball 1LE29822DA113AA3 2220 SA-7IEE 23.2 91.7 415 25 1800 284T 460 RGZEESDX Ball 1LE29822CB112AA3 2120 SA-7IEE 30 93.6 445 25 1800 284T 575 RGZEESDX Ball 1LE29822CB113AA3 2120 SA-7IEE 24 93.6 445 25 1800 284TS 460 RGZEESDX Ball 1LE29822DB112AA3 2120 SA-7IEE 30 93.6 445 25 1800 284TS 575 RGZEESDX Ball 1LE29822DB113AA3 2120 SA-7IEE 24 93.6 445 25 1200 324T 460 RGZEESDX Ball 1LE29823AC112AA3 3591 SA-7IEE 33 93 640 25 1200 324T 575 RGZEESDX Ball 1LE29823AC113AA3 3591 SA-7IEE 26.4 93 640 25 900 326T 460 RGZEESDX Ball 1LE29823AD212AA3 5487 SA-7IEE 41 90.2 582 25 900 326T 575 RGZEESDX Ball 1LE29823AD213AA3 5487 SA-7IEE 32.8 90.2 582 30 3600 286TS 460 RGZEESDX Ball 1LE29822DA212AA3 2593 SA-7IEE 34 91.7 430 30 3600 286TS 575 RGZEESDX Ball 1LE29822DA213AA3 2593 SA-7IEE 27.2 91.7 430 30 1800 286T 460 RGZEESDX Ball 1LE29822CB212AA3 2465 SA-7IEE 35 93.6 465 30 1800 286T 575 RGZEESDX Ball 1LE29822CB213AA3 2465 SA-7IEE 28 93.6 465 30 1800 286TS 460 RGZEESDX Ball 1LE29822DB212AA3 2465 SA-7IEE 35 93.6 465 30 1800 286TS 575 RGZEESDX Ball 1LE29822DB213AA3 2465 SA-7IEE 28 93.6 465 30 1200 326T 460 RGZEESDX Ball 1LE29823AC212AA3 4137 SA-7IEE 39 93 675 30 1200 326T 575 RGZEESDX Ball 1LE29823AC213AA3 4137 SA-7IEE 31.2 93 675 30 900 364T 460 RGZEESDX Ball 1LE29823CD112AA3 6494 SA-7IEE 47 91.7 740 30 900 364T 575 RGZEESDX Ball 1LE29823CD113AA3 6494 SA-7IEE 37.6 91.7 740 40 3600 324TS 460 RGZEESDX Ball 1LE29823BA112AA3 3420 SA-7IEE 45 93.6 575 40 3600 324TS 575 RGZEESDX Ball 1LE29823BA113AA3 3420 SA-7IEE 36 93.6 575 40 1800 324T 460 RGZEESDX Ball 1LE29823AB112AA3 3275 SA-7IEE 46 94.1 666 40 1800 324T 575 RGZEESDX Ball 1LE29823AB113AA3 3275 SA-7IEE 36.8 94.1 666 40 1800 324TS 460 RGZEESDX Ball 1LE29823BB112AA3 3275 SA-7IEE 46 94.1 666 40 1800 324TS 575 RGZEESDX Ball 1LE29823BB113AA3 3275 SA-7IEE 36.8 94.1 666 40 1200 364T 460 RGZEESDX Ball 1LE29823CC112AA3 5606 SA-7IEE 49 94.1 863 40 1200 364T 575 RGZEESDX Ball 1LE29823CC113AA3 5606 SA-7IEE 39.2 94.1 863 40 900 365T 460 RGZEESDX Ball 1LE29823CD212AA3 7852 SA-7IEE 63 91.7 840 40 900 365T 575 RGZEESDX Ball 1LE29823CD213AA3 7852 SA-7IEE 50.4 91.7 840 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only FL Amps at 460V or 575V All RGZEESDX motors will be discontinued when present stock is depleted DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 3-43 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions / IEEE 841 - TEFC RGZEESDX HP RPM Frame Voltage Type DE Bearing 3-44 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 50 3600 326TS 460 RGZEESDX Ball 1LE29823BA212AA3 4348 SA-7IEE 55 93.6 610 50 3600 326TS 575 RGZEESDX Ball 1LE29823BA213AA3 4348 SA-7IEE 44 93.6 610 50 1800 326T 460 RGZEESDX Ball 1LE29823AB212AA3 3987 SA-7IEE 58 94.5 700 50 1800 326T 575 RGZEESDX Ball 1LE29823AB213AA3 3987 SA-7IEE 46.4 94.5 700 50 1800 326TS 460 RGZEESDX Ball 1LE29823BB212AA3 3987 SA-7IEE 58 94.5 700 50 1800 326TS 575 RGZEESDX Ball 1LE29823BB213AA3 3987 SA-7IEE 46.4 94.5 700 50 1200 365T 460 RGZEESDX Ball 1LE29823CC212AA3 6381 SA-7IEE 62 94.1 900 50 1200 365T 575 RGZEESDX Ball 1LE29823CC213AA3 6381 SA-7IEE 49.6 94.1 900 50 900 404T 460 RGZEESDX Ball 1LE29824AD112AA3 9139 SA-7IEE 67 92.4 1116 50 900 404T 575 RGZEESDX Ball 1LE29824AD113AA3 9139 SA-7IEE 53.6 92.4 1116 60 3600 364TS 460 RGZEESDX Ball 1LE29823DA112AA3 5770 SA-7IEE 68 93.6 717 60 3600 364TS 575 RGZEESDX Ball 1LE29823DA113AA3 5770 SA-7IEE 54.4 93.6 717 60 1800 364T 460 RGZEESDX Ball 1LE29823CB112AA3 5670 SA-7IEE 68 95 930 60 1800 364T 575 RGZEESDX Ball 1LE29823CB113AA3 5670 SA-7IEE 54.4 95 930 60 1800 364TS 460 RGZEESDX Ball 1LE29823DB112AA3 5670 SA-7IEE 68 95 930 60 1800 364TS 575 RGZEESDX Ball 1LE29823DB113AA3 5670 SA-7IEE 54.4 95 930 60 1200 404T 460 RGZEESDX Ball 1LE29824AC112AA3 7282 SA-7IEE 74 94.5 1100 60 1200 404T 575 RGZEESDX Ball 1LE29824AC113AA3 7282 SA-7IEE 59.2 94.5 1100 60 900 405T 460 RGZEESDX Ball 1LE29824AD212AA3 10255 SA-7IEE 78 92.4 1182 60 900 405T 575 RGZEESDX Ball 1LE29824AD213AA3 10255 SA-7IEE 62.4 92.4 1182 75 3600 365TS 460 RGZEESDX Ball 1LE29823DA212AA3 7245 SA-7IEE 85 94.1 815 75 3600 365TS 575 RGZEESDX Ball 1LE29823DA213AA3 7245 SA-7IEE 68 94.1 815 75 1800 365T 460 RGZEESDX Ball 1LE29823CB212AA3 7062 SA-7IEE 85 95.4 1000 75 1800 365T 575 RGZEESDX Ball 1LE29823CB213AA3 7062 SA-7IEE 68 95.4 1000 75 1800 365TS 460 RGZEESDX Ball 1LE29823DB212AA3 7062 SA-7IEE 85 95.4 1000 75 1800 365TS 575 RGZEESDX Ball 1LE29823DB213AA3 7062 SA-7IEE 68 95.4 1000 75 1200 405T 460 RGZEESDX Ball 1LE29824AC212AA3 8497 SA-7IEE 93 94.5 1150 75 1200 405T 575 RGZEESDX Ball 1LE29824AC213AA3 8497 SA-7IEE 74.4 94.5 1150 75 900 444T 460 RGZEESDX Roller 1LE29824CD112AA3 13636 SA-7IEE 94 93.6 1525 75 900 444T 575 RGZEESDX Roller 1LE29824CD113AA3 13636 SA-7IEE 75.2 93.6 1525 100 3600 405TS 460 RGZEESDX Ball 1LE29824BA212AA3 9624 SA-7IEE 108 94.1 1100 100 3600 405TS 575 RGZEESDX Ball 1LE29824BA213AA3 9624 SA-7IEE 86.4 94.1 1100 100 1800 405T 460 RGZEESDX Ball 1LE29824AB212AA3 8725 SA-7IEE 113 95.4 1160 100 1800 405T 575 RGZEESDX Ball 1LE29824AB213AA3 8725 SA-7IEE 90.4 95.4 1160 100 1800 405TS 460 RGZEESDX Ball 1LE29824BB212AA3 8725 SA-7IEE 113 95.4 1160 100 1800 405TS 575 RGZEESDX Ball 1LE29824BB213AA3 8725 SA-7IEE 90.4 95.4 1160 100 1200 444T 460 RGZEESDX Roller 1LE29824CC112AA3 11717 SA-7IEE 117 95 1545 100 1200 444T 575 RGZEESDX Roller 1LE29824CC113AA3 11717 SA-7IEE 93.6 95 1545 100 1200 444TS 460 RGZEESDX Ball 1LE29824DC112AA3 11717 SA-7IEE 117 95 1545 100 1200 444TS 575 RGZEESDX Ball 1LE29824DC113AA3 11717 SA-7IEE 93.6 95 1545 100 1200 B444T 460 RGZEESDX Ball 1LE29824EC112AA3 11717 SA-7IEE 117 95 1545 100 1200 B444T 575 RGZEESDX Ball 1LE29824EC113AA3 11717 SA-7IEE 93.6 95 1545 100 900 445T 460 RGZEESDX Roller 1LE29824CD212AA3 16710 SA-7IEE 123 94.1 1697 100 900 445T 575 RGZEESDX Roller 1LE29824CD213AA3 16710 SA-7IEE 98.4 94.1 1697 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZEESDX motors will be discontinued when present stock is depleted Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model DOE#CC032A

/ IEEE 841 - TEFC RGZEESDX HP RPM Frame Voltage Type DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 125 3600 444TS 460 RGZEESDX Ball 1LE29824DA112AA3 12360 SA-7IEE 138 95 1454 125 3600 444TS 575 RGZEESDX Ball 1LE29824DA113AA3 12360 SA-7IEE 110.4 95 1454 125 1800 444T 460 RGZEESDX Roller 1LE29824CB112AA3 11383 SA-7IEE 143 95.4 1600 125 1800 444T 575 RGZEESDX Roller 1LE29824CB113AA3 11383 SA-7IEE 114.4 95.4 1600 125 1800 444TS 460 RGZEESDX Ball 1LE29824DB112AA3 11383 SA-7IEE 143 95.4 1600 125 1800 444TS 575 RGZEESDX Ball 1LE29824DB113AA3 11383 SA-7IEE 114.4 95.4 1600 125 1800 B444T 460 RGZEESDX Ball 1LE29824EB112AA3 11383 SA-7IEE 143 95.4 1600 125 1800 B444T 575 RGZEESDX Ball 1LE29824EB113AA3 11383 SA-7IEE 114.4 95.4 1600 125 1200 445T 460 RGZEESDX Roller 1LE29824CC212AA3 14135 SA-7IEE 144 95 1720 125 1200 445T 575 RGZEESDX Roller 1LE29824CC213AA3 14135 SA-7IEE 115.2 95 1720 125 1200 445TS 460 RGZEESDX Ball 1LE29824DC212AA3 14135 SA-7IEE 144 95 1720 125 1200 445TS 575 RGZEESDX Ball 1LE29824DC213AA3 14135 SA-7IEE 115.2 95 1720 125 1200 B445T 460 RGZEESDX Ball 1LE29824EC212AA3 14135 SA-7IEE 144 95 1720 125 1200 B445T 575 RGZEESDX Ball 1LE29824EC213AA3 14135 SA-7IEE 115.2 95 1720 125 900 447T 460 RGZEESDX Roller 1LE29824CD312AA3 17163 SA-7IEE 152 94.1 2018 125 900 447T 575 RGZEESDX Roller 1LE29824CD313AA3 17163 SA-7IEE 121.6 94.1 2018 150 3600 445TS 460 RGZEESDX Ball 1LE29824DA212AA3 14450 SA-7IEE 164 95 1615 150 3600 445TS 575 RGZEESDX Ball 1LE29824DA213AA3 14450 SA-7IEE 131.2 95 1615 150 1800 445T 460 RGZEESDX Roller 1LE29824CB212AA3 12875 SA-7IEE 170 95.8 1710 150 1800 445T 575 RGZEESDX Roller 1LE29824CB213AA3 12875 SA-7IEE 136 95.8 1710 150 1800 445TS 460 RGZEESDX Ball 1LE29824DB212AA3 12875 SA-7IEE 170 95.8 1710 150 1800 445TS 575 RGZEESDX Ball 1LE29824DB213AA3 12875 SA-7IEE 136 95.8 1710 150 1800 B445T 460 RGZEESDX Ball 1LE29824EB212AA3 12875 SA-7IEE 170 95.8 1710 150 1800 B445T 575 RGZEESDX Ball 1LE29824EB213AA3 12875 SA-7IEE 136 95.8 1710 150 1200 447T 460 RGZEESDX Roller 1LE29824CC312AA3 15527 SA-7IEE 172 95.8 1995 150 1200 447T 575 RGZEESDX Roller 1LE29824CC313AA3 15527 SA-7IEE 137.6 95.8 1995 150 1200 447TS 460 RGZEESDX Ball 1LE29824DC312AA3 15527 SA-7IEE 172 95.8 1995 150 1200 447TS 575 RGZEESDX Ball 1LE29824DC313AA3 15527 SA-7IEE 137.6 95.8 1995 150 1200 B447T 460 RGZEESDX Ball 1LE29824EC312AA3 15527 SA-7IEE 172 95.8 1995 150 1200 B447T 575 RGZEESDX Ball 1LE29824EC313AA3 15527 SA-7IEE 137.6 95.8 1995 150 900 449T 460 RGZEESDX Roller 1LE29824CD512AA3 21945 SA-7IEE 180 94.1 2480 150 900 449T 575 RGZEESDX Roller 1LE29824CD513AA3 21945 SA-7IEE 144 94.1 2480 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZEESDX motors will be discontinued when present stock is depleted Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model Introduction General Purpose Duty Duty Purpose DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 3-45 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions / IEEE 841 - TEFC RGZEESDX HP RPM Frame Voltage Type DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 FL Amps* FL Nom. Eff. (%) Weight (lbs) 200 3600 447TS 460 RGZEESDX Ball 1LE29824DA312AA3 18122 SA-7IEE 216 95.4 1890 200 3600 447TS 575 RGZEESDX Ball 1LE29824DA313AA3 18122 SA-7IEE 172.8 95.4 1890 200 1800 447T 460 RGZEESDX Roller 1LE29824CB312AA3 15660 SA-7IEE 226 96.2 2035 200 1800 447T 575 RGZEESDX Roller 1LE29824CB313AA3 15660 SA-7IEE 180.8 96.2 2035 200 1800 447TS 460 RGZEESDX Ball 1LE29824DB312AA3 15660 SA-7IEE 226 96.2 2035 200 1800 447TS 575 RGZEESDX Ball 1LE29824DB313AA3 15660 SA-7IEE 180.8 96.2 2035 200 1800 B447T 460 RGZEESDX Ball 1LE29824EB312AA3 15660 SA-7IEE 226 96.2 2035 200 1800 B447T 575 RGZEESDX Ball 1LE29824EB313AA3 15660 SA-7IEE 180.8 96.2 2035 200 1200 449T 460 RGZEESDX Roller 1LE29824CC512AA3 18832 SA-7IEE 227 95.8 2425 200 1200 449T 575 RGZEESDX Roller 1LE29824CC513AA3 18832 SA-7IEE 181.6 95.8 2425 200 1200 449TS 460 RGZEESDX Ball 1LE29824DC512AA3 18832 SA-7IEE 227 95.8 2425 200 1200 449TS 575 RGZEESDX Ball 1LE29824DC513AA3 18832 SA-7IEE 181.6 95.8 2425 200 1200 B449T 460 RGZEESDX Ball 1LE29824EC512AA3 18832 SA-7IEE 227 95.8 2425 200 1200 B449T 575 RGZEESDX Ball 1LE29824EC513AA3 18832 SA-7IEE 181.6 95.8 2425 200 900 S449LS 460 RGZEESDX Roller 1LE29824FD112AA3 31275 SA-7IEE 240 94.5 3200 200 900 S449LS 575 RGZEESDX Roller 1LE29824FD113AA3 31275 SA-7IEE 192 94.5 3200 250 3600 449TS 460 RGZEESDX Ball 1LE29824DA512AA3 22840 SA-7IEE 269 95.8 2272 250 3600 449TS 575 RGZEESDX Ball 1LE29824DA513AA3 22840 SA-7IEE 215.2 95.8 2272 250 1800 449T 460 RGZEESDX Roller 1LE29824CB512AA3 19650 SA-7IEE 281 96.2 2425 250 1800 449T 575 RGZEESDX Roller 1LE29824CB513AA3 19650 SA-7IEE 224.8 96.2 2425 250 1800 449TS 460 RGZEESDX Ball 1LE29824DB512AA3 19650 SA-7IEE 281 96.2 2425 250 1800 449TS 575 RGZEESDX Ball 1LE29824DB513AA3 19650 SA-7IEE 224.8 96.2 2425 250 1800 B449T 460 RGZEESDX Ball 1LE29824EB512AA3 19650 SA-7IEE 281 96.2 2425 250 1800 B449T 575 RGZEESDX Ball 1LE29824EB513AA3 19650 SA-7IEE 224.8 96.2 2425 250 1200 449T 460 RGZEESDX Roller 1LE29824CC612AA3 20490 SA-7IEE 281 95.8 2390 250 1200 449T 575 RGZEESDX Roller 1LE29824CC613AA3 20490 SA-7IEE 224.8 95.8 2390 250 1200 449TS 460 RGZEESDX Ball 1LE29824DC612AA3 20490 SA-7IEE 281 95.8 2390 250 1200 449TS 575 RGZEESDX Ball 1LE29824DC613AA3 20490 SA-7IEE 224.8 95.8 2390 250 1200 B449T 460 RGZEESDX Ball 1LE29824EC612AA3 20490 SA-7IEE 281 95.8 2390 250 1200 B449T 575 RGZEESDX Ball 1LE29824EC613AA3 20490 SA-7IEE 224.8 95.8 2390 250 900 S449LS 460 RGZEESDX Roller 1LE29824FD212AA3 33925 SA-7IEE 303 94.5 3220 250 900 S449LS 575 RGZEESDX Roller 1LE29824FD213AA3 33925 SA-7IEE 242.4 94.5 3220 300 3600 449TS 460 RGZEESDX Ball 1LE29824DA612AA3 30830 SA-7IEE 323 95.8 2200 300 3600 449TS 575 RGZEESDX Ball 1LE29824DA613AA3 30830 SA-7IEE 258.4 95.8 2200 300 1800 S449LS 460 RGZEESDX Roller 1LE29824FB112AA3 28330 SA-7IEE 346 96.2 3130 300 1800 S449LS 575 RGZEESDX Roller 1LE29824FB113AA3 28330 SA-7IEE 276.8 96.2 3130 300 1800 S449SS 460 RGZEESDX Ball 1LE29824GB112AA3 28330 SA-7IEE 346 96.2 3130 300 1800 S449SS 575 RGZEESDX Ball 1LE29824GB113AA3 28330 SA-7IEE 276.8 96.2 3130 300 1200 S449LS 460 RGZEESDX Roller 1LE29824FC112AA3 37850 SA-7IEE 342 95.8 3240 300 1200 S449LS 575 RGZEESDX Roller 1LE29824FC113AA3 37850 SA-7IEE 273.6 95.8 3240 350 3600 S449SS 460 RGZEESDX Ball 1LE29824GA112AA3 35040 SA-7IEE 372 95.8 2890 350 3600 S449SS 575 RGZEESDX Ball 1LE29824GA113AA3 35040 SA-7IEE 297.6 95.8 2890 350 1800 S449LS 460 RGZEESDX Roller 1LE29824FB212AA3 32450 SA-7IEE 392 96.2 3190 350 1800 S449LS 575 RGZEESDX Roller 1LE29824FB213AA3 32450 SA-7IEE 313.6 96.2 3190 350 1800 S449SS 460 RGZEESDX Ball 1LE29824GB212AA3 32450 SA-7IEE 392 96.2 3190 350 1800 S449SS 575 RGZEESDX Ball 1LE29824GB213AA3 32450 SA-7IEE 313.6 96.2 3190 Stock Model 3-46 2009-2010 Low Voltage AC Selection and Pricing Guide DOE#CC032A

/ IEEE 841 - TEFC RGZEESDX HP RPM Frame Voltage Type DE Bearing List Price $ NEMA Premium Efficiency Mult. Sym. FL Amps* FL Nom. Eff. (%) Weight (lbs) 400 3600 S449SS 460 RGZEESDX Ball 1LE29824GA312AA3 39300 SA-7IEE 422 95.8 3065 400 3600 S449SS 575 RGZEESDX Ball 1LE29824GA313AA3 39300 SA-7IEE 337.6 95.8 3065 400 1800 S449LS 460 RGZEESDX Roller 1LE29824FB312AA3 36400 SA-7IEE 454 96.2 3240 400 1800 S449LS 575 RGZEESDX Roller 1LE29824FB313AA3 36400 SA-7IEE 363.2 96.2 3240 400 1800 S449SS 460 RGZEESDX Ball 1LE29824GB312AA3 36400 SA-7IEE 454 96.2 3240 400 1800 S449SS 575 RGZEESDX Ball 1LE29824GB313AA3 36400 SA-7IEE 363.2 96.2 3240 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZEESDX motors will be discontinued when present stock is depleted Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Stock Model Introduction General Purpose Duty Duty Purpose DOE#CC032A 2009-2010 Low Voltage AC Selection and Pricing Guide 3-47 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions (SD ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) SD10 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Altitude / Ambient Rerate/Derate Y80 Z 140-S449 140-S449 110 110 110 110 110 110 110 110 110 110 110 Assembly - Mounting & Terminal Box Position F-2 2 16 140-440 140-440 200 200 200 200 200 200 200 200 200 200 - W-1 9+R1A 16+Z 140-440 140-440 200 200 200 200 200 200 200 200 200 200 - W-2 9+R2A 16+Z 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 W-3 9+R3A 16+Z 140-S449 140-S449 90 90 90 90 90 90 90 90 90 90 90 W-4 9+R4A 16+Z 140-440 140-S449 200 200 200 200 200 200 200 200 200 200 - W-5 6 16 140-440 140-440 200 200 200 200 200 200 200 200 200 200 - W-8 7 16 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 C-1 8 16 140-440 140-440 200 200 200 200 200 200 200 200 200 200 - C-2 1 16 140-S449 140-S449 90 90 90 90 90 90 90 90 90 90 90 Bearings Sealed Ball bearings 1 L68 Z 140-S449-160 160 160 320 320 320 400 640 640 640 800 (except 2 pole, 360+ frames) Breathers & Drain Plugs T Drain SS L45 Z 140-S449 140-S449 110 110 110 160 160 160 210 210 210 210 210 Crouse Hinds - UL Approved L46 Z 280-S449 280-S449 - - - - 240 240 240 240 240 240 240 Conduit Box - Main Orient 90 deg CCW J84 Z 140-S449 140-S449 90 90 90 90 90 90 90 90 90 90 90 Orient 180 deg CCW J85 Z 140-S449 140-S449 90 90 90 90 90 90 90 90 90 90 90 Orient 270 deg CCW J86 Z 140-S449 140-S449 90 90 90 90 90 90 90 90 90 90 90 Conduit Box - Auxiliary for Thermostats Condulet to Main Box J12 Z 140-S449 140-S449 165 165 165 165 165 165 165 165 165 165 165 Conduit Box - Auxiliary for Space Heaters Condulet to Main Box J52 Z 140-S449 140-S449 165 165 165 165 165 165 165 165 165 165 165 Drip Cover Drip cover w/o vertical K33 Z 140-S449 140-S449 106 106 106 114 114 204 414 580 1072 1072 1072 lifting devices Export Packaging Sea Freight - B09 Z 140-S449 140-S449 225 225 225 225 510 760 760 1010 1010 1010 1010 Siemens Standard Flanged End Shields C-Face with Feet 2 E 14 140-440 140-S449 143 173 197 435 602 651 703 872 1033 1033 - C-Face without Feet G 14 140-250 140-250 157 196 220 470 - - - - - - - D-Flange with Feet F 14 140-250 140-250 196 249 273 534 - - - - - - - Grounding Provision (tapped hole on L27 Z 140-S449 140-S449 95 95 95 110 110 125 125 125 175 175 175 frame w/bolt) Hardware Stainless Steel L22 Z 140-S449 140-S449 134 134 134 134 134 165 203 250 308 379 425 Lifting Eyebolt 3 L20 Z 140 std 30 std std std std std std std std std std For further details please refer to section 8 1 Sealed Ball not available for 2 pole motors with frames > 360 2 C face with fee for 440 frames, only available with ball bearings 3 Lisfting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 3-48 2009-2010 Low Voltage AC Selection and Pricing Guide

(SD ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) SD10 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Insulation Fungus Protection C07 Z 140-S449 140-S449 142 142 142 208 208 208 208 360 360 360 360 Leads / Terminal Blocks Burndy Hydent type YA K80 Z 140-S449 140-S449 115 115 115 115 115 115 115 115 115 115 115 Sealed Leads K89 Z 140-S449 140-S449 150 150 150 150 150 150 200 200 200 200 200 Lubrication Grease Fitting / Pressure L60 Z 140-S449 std 125 125 125 125 125 125 125 125 125 125 125 Relief Nameplate Extra M21 Z 140-S449 140-S449 110 110 110 110 110 110 110 110 110 110 110 Division 2 4 M22 Z 140-S449 140-S449 205 205 205 205 205 205 205 205 205 205 205 Change (Rerate/Derate) Y80 Z 140-S449 140-S449 110 110 110 110 110 110 110 110 110 110 110 Auxiliary Y82 Z 140-S449 140-S449 110 110 110 110 110 110 110 110 110 110 110 Protective Devices - Windings Thermostats, normally G 15 140-S449 140-S449 150 150 150 150 150 200 200 300 300 370 370 closed, 2 per motor Rotation Arrow Bidirectional (not applicable K70 Z 140-S449 140-S449 95 95 95 95 95 95 95 95 95 95 95 for uni-directional motors) Clockwise (facing ODE) K71 Z 140-S449 140-S449 95 95 95 95 95 95 95 95 95 95 95 Counterclockwise (facing K72 Z 140-S449 140-S449 95 95 95 95 95 95 95 95 95 95 95 ODE) Service Factor Rerate/Derate Y80 Z 140-S449 140-S449 110 110 110 110 110 110 110 110 110 110 110 Shaft Seal Slinger & O Ring L76 Z 140-S449 140-S449 60 60 60 85 85 115 115 145 145 145 145 (4, 6, 8 Pole only) Inpro Seal / DE L79 Z 140-S449-363 363 379 442 458 482 553 679 742 742 742 Software Documentation in Spanish D05 Z 140-S449 140-S449 0 0 0 0 0 0 0 0 0 0 0 Certificate of Compliance F00 Z 140-S449 140-S449 200 200 200 200 200 200 200 200 200 200 200 Standard Transmittal F40 Z 140-S449 140-S449 30 30 30 30 30 30 30 30 30 30 30 Standard Dimension Sheet F42 Z 140-S449 140-S449 30 30 30 30 30 30 30 30 30 30 30 Conduit Box Dimension F44 Z 140-S449 140-S449 30 30 30 30 30 30 30 30 30 30 30 Sheet Wiring Diagram F45 Z 140-S449 140-S449 30 30 30 30 30 30 30 30 30 30 30 IOM F46 Z 140-S449 140-S449 30 30 30 30 30 30 30 30 30 30 30 Renewal Parts F47 Z 140-S449 140-S449 30 30 30 30 30 30 30 30 30 30 30 Sheets F49 Z 140-S449 140-S449 175 175 175 175 175 175 175 175 175 175 175 F03 Z 140-S449 140-S449 500 500 500 500 500 500 500 500 500 500 500 For further details please refer to section 8 1 Sealed Ball not available for 2 pole motors with frames > 360 2 C face with fee for 440 frames, only available with ball bearings 3 Lisfting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 3-49 Dimensions

Introduction General Purpose Duty (SD ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) SD10 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Space Heater 115V, Single Phase A40 Z 140-S449 140-S449 237 237 237 237 351 351 351 407 407 407 407 230V, Single Phase A41 Z 140-S449 140-S449 237 237 237 237 351 351 351 407 407 407 407 115V, Single Phase, Div 2 A42 Z 140-S449 140-S449 292 292 292 292 436 436 524 640 758 856 856 230V, Single Phase, Div 2 A44 Z 140-S449 140-S449 292 292 292 292 436 436 524 640 758 856 856 Testing Routine Test Report F10 Z 140-S449-200 200 200 200 200 200 200 200 200 200 200 Routine Test Report with F20 Z 140-S449 140-S449 400 400 400 400 400 400 400 400 400 400 400 Vibration Test Voltage Single Voltage - 230V 11 12&13 140-250 - 85 85 95 110 - - - - - - - (outside leads connection only) Single Voltage - 460V (outside leads connection only) 12 12&13 140-250 - 85 85 95 110 - - - - - - - For further details please refer to section 8 1 Sealed Ball not available for 2 pole motors with frames > 360 2 C face with fee for 440 frames, only available with ball bearings 3 Lisfting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 Dimensions Duty Purpose 3-50 2009-2010 Low Voltage AC Selection and Pricing Guide

(RGZ ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) RGZESD RGZEESD RGZEESDX 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Altitude / Ambient Rerate/Derate Y80 Z 280-S449 280-S449 280-S449 110 110 110 110 110 110 110 110 110 110 110 Assembly - Mounting & Terminal Box Position F-2 2 16 280-440 280-440 280-440 200 200 200 200 200 200 200 200 200 200 - W-1 9+R1A 16+Z 280-440 280-440 280-440 200 200 200 200 200 200 200 200 200 200 - W-2 9+R2A 16+Z 280-S449 280-S449 280-S449 90 90 90 90 90 90 90 90 90 90 90 W-3 9+R3A 16+Z 280-S449 280-S449 280-S449 90 90 90 90 90 90 90 90 90 90 90 W-4 9+R4A 16+Z 280-440 280-440 280-440 200 200 200 200 200 200 200 200 200 200 - W-5 6 16 280-440 280-440 280-440 200 200 200 200 200 200 200 200 200 200 - W-8 7 16 280-S449 280-S449 280-S449 90 90 90 90 90 90 90 90 90 90 90 C-1 8 16 280-440 280-440 280-440 200 200 200 200 200 200 200 200 200 200 - C-2 1 16 280-S449 280-S449 280-S449 90 90 90 90 90 90 90 90 90 90 90 Bearings Sealed Ball bearings 1 L68 Z 280-S449 280-S449-160 160 160 320 320 320 400 640 640 640 800 (except 2 pole, 360+ frames) Breathers & Drain Plugs T Drain SS L45 Z 280-S449 280-S449 280-S449 110 110 110 160 160 160 210 210 210 210 210 Crouse Hinds - UL L46 Z 280-S449 280-S449 280-S449 - - - - 240 240 240 240 240 240 240 Approved Conduit Box - Main Orient 90 deg CCW J84 Z 280-S449 280-S449 280-S449 90 90 90 90 90 90 90 90 90 90 90 Orient 180 deg CCW J85 Z 280-S449 280-S449 280-S449 90 90 90 90 90 90 90 90 90 90 90 Orient 270 deg CCW J86 Z 280-S449 280-S449 280-S449 90 90 90 90 90 90 90 90 90 90 90 Conduit Box - Auxiliary for Thermostats Condulet to Main Box J12 Z 280-S449 280-S449 280-S449 165 165 165 165 165 165 165 165 165 165 165 Conduit Box - Auxiliary for Space Heaters Condulet to Main Box J52 Z 280-S449 280-S449 280-S449 165 165 165 165 165 165 165 165 165 165 165 Drip Cover Drip cover without K33 Z 280-S449 280-S449 280-S449 106 106 106 114 114 204 414 580 1072 1072 1072 vertical lifting devices Export Packaging Sea Freight- Siemens B09 Z 280-S449 280-S449 280-S449 225 225 225 225 510 760 760 1010 1010 1010 1010 Standard Flanged End Shields C-Face with Feet 2 E 14 280-440 280-440 280-440 143 173 197 435 602 651 703 872 1033 1033 - Grounding Provision (tapped hole L27 Z 280-S449 280-S449 280-S449 95 95 95 110 110 125 125 125 175 175 175 on frame w/bolt) Hardware Stainless Steel L22 Z 280-S449 280-S449 280-S449 134 134 134 134 134 165 203 250 308 379 425 Lifting Eyebolt 3 L20 Z Standard Standard Standard 30 std std std std std std std std std std Altitude / Ambient Fungus Protection C07 Z 280-S449 280-S449 280-S449 142 142 142 208 208 208 208 360 360 360 360 For further details please refer to section 8 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. 2009-2010 Low Voltage AC Selection and Pricing Guide S449 3-51 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions (RGZ ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 RGZESD RGZEESD RGZEESDX 145 184 215 256 286 326 365 405 445 449 Leads / Terminal Blocks Burndy Hydent type YA K80 Z 280-S449 280-S449 280-S449 115 115 115 115 115 115 115 115 115 115 115 Sealed Leads K89 Z 280-S449 280-S449 280-S449 150 150 150 150 150 150 200 200 200 200 200 Lubrication Grease Fitting / Pressure L60 Z 280-S449 280-S449 Standard 125 125 125 125 125 125 125 125 125 125 125 Relief Nameplate Extra M21 Z 280-S449 280-S449 280-S449 110 110 110 110 110 110 110 110 110 110 110 Division 2 4 M22 Z 280-S449 280-S449 280-S449 205 205 205 205 205 205 205 205 205 205 205 Change (Rerate/Derate) Y80 Z 280-S449 280-S449 280-S449 110 110 110 110 110 110 110 110 110 110 110 Auxiliary Y82 Z 280-S449 280-S449 280-S449 110 110 110 110 110 110 110 110 110 110 110 Protective Devices - Windings Thermostats, normally G 15 280-S449 280-S449 280-S449 150 150 150 150 150 200 200 300 300 370 370 closed, 2 per motor Rotation Arrow Bidirectional (not K70 Z 280-S449 280-S449 280-S449 95 95 95 95 95 95 95 95 95 95 95 applicable for unidirectional motors) Clockwise (facing ODE) K71 Z 280-S449 280-S449 280-S449 95 95 95 95 95 95 95 95 95 95 95 Counterclockwise K72 Z 280-S449 280-S449 280-S449 95 95 95 95 95 95 95 95 95 95 95 (facing ODE) Service Factor Rerate/Derate Y80 Z 280-S449 280-S449 280-S449 110 110 110 110 110 110 110 110 110 110 110 Shaft Seal Slinger & O Ring (4, 6, 8 Pole only) L76 Z 280-S449 280-S449 280-S449 60 60 60 85 85 115 115 145 145 145 145 Inpro Seal / DE L79 Z 280-S449 280-S449-363 363 379 442 458 482 553 679 742 742 742 Inpro Seal / ODE L80 Z - 280-S449-363 363 379 442 458 482 553 679 742 742 742 Inpro Seal / Both Ends L81 Z - 280-S449 std 726 726 758 884 916 964 1106 1358 1484 1484 1484 Software Documentation in Spanish D05 Z 280-S449 280-S449 280-S449 0 0 0 0 0 0 0 0 0 0 0 Certificate of Compliance F00 Z 280-S449 280-S449 280-S449 200 200 200 200 200 200 200 200 200 200 200 Standard F40 Z 280-S449 280-S449 280-S449 30 30 30 30 30 30 30 30 30 30 30 Transmittal Standard Dimension F42 Z 280-S449 280-S449 280-S449 30 30 30 30 30 30 30 30 30 30 30 Sheet Conduit Box Dimension F44 Z 280-S449 280-S449 280-S449 30 30 30 30 30 30 30 30 30 30 30 Sheet Wiring Diagram F45 Z 280-S449 280-S449 280-S449 30 30 30 30 30 30 30 30 30 30 30 IOM F46 Z 280-S449 280-S449 280-S449 30 30 30 30 30 30 30 30 30 30 30 Renewal Parts F47 Z 280-S449 280-S449 280-S449 30 30 30 30 30 30 30 30 30 30 30 F49 Z 280-S449 280-S449 280-S449 175 175 175 175 175 175 175 175 175 175 175 Sheets F03 Z 280-S449 280-S449 280-S449 500 500 500 500 500 500 500 500 500 500 500 For further details please refer to section 8 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 3-52 2009-2010 Low Voltage AC Selection and Pricing Guide

(RGZ ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 RGZESD RGZEESD RGZEESDX 145 184 215 256 286 326 365 405 445 449 Space Heater 115V, Single Phase A40 Z 280-S449 280-S449 280-S449 237 237 237 237 351 351 351 407 407 407 407 230V, Single Phase A41 Z 280-S449 280-S449 280-S449 237 237 237 237 351 351 351 407 407 407 407 115V, Single Phase, A42 Z 280-S449 280-S449 280-S449 292 292 292 292 436 436 524 640 758 856 856 Div 2 230V, Single Phase, A44 Z 280-S449 280-S449 280-S449 292 292 292 292 436 436 524 640 758 856 856 Div 2 Testing Routine Test Report F10 Z 280-S449 280-S449-200 200 200 200 200 200 200 200 200 200 200 Routine Test Report with Vibration Test F20 Z 280-S449 280-S449 280-S449 400 400 400 400 400 400 400 400 400 400 400 Voltage Single Voltage - 230V (outside leads connection only) Single Voltage - 460V (outside leads connection only) 11 12 &13 12 12 &13 For further details please refer to section 8 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. - 20HP - 85 85 95 110 110 110 140 - - - - - 20HP - 85 85 95 110 110 110 140 - - - - S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 3-53 Dimensions

Introduction General Purpose Duty Duty Purpose Options (SD ) Description Code Order Code Pos SD10 List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Assembly - Mounting & Terminal Box Position W-6 4 16 440-S449 440-S449 - - - - - - - 140 140 140 140 W-7 5 16 440 440 - - - - - - - 200 200 200 - F-2 2 16 S449 S449 200 200 200 200 200 200 200 200 200 200 - Auxiliary boxes 1 Auxiliary conduit box location (Digit 2) Condulet on main side J 0 Z 280-S449 280-S449 - - - - 165 165 165 165 165 165 165 Condulet to main J 2 Z 140-S449 140-S449 165 165 165 165 165 165 165 165 165 165 165 conduit box Auxiliary conduit box J 3 Z 280-S449 280-S449 - - - - 291 291 291 291 291 291 291 to main conduit box Condulet- opposite of J 4 Z 180-S449 180-S449 165 165 165 165 165 165 165 165 165 165 main conduit box side Auxiliary box- opposite of main conduit box side J 5 Z 280-S449 280-S449 165 165 165 165 291 291 291 291 291 291 291 Temperature detector device (Digit 1) Select the number that corresponds with the appropriate Temperature Detector Device to create your initial 3 digital ordering code. Thermistors 0 Thermostats 1 KTY 84 Thermistor 2 Space heaters 5 Stator RTD s on J35 280-S449 280-S449 - - - - 291 291 291 291 291 291 291 auxiliary conduit box on main Balance Precision M69 Z 140-S449 std - 128 128 147 147 167 167 211 211 404 404 Extra Precision M70 Z 140-S449 140-S449-216 216 228 228 260 260 350 350 450 450 Bearings Roller Instead of Ball L65 Z 280-400 280-400 - - - - 825 825 825 825 std std std Insulated L66 Z 140-S449-765 765 1050 1315 1665 1975 2350 5100 7850 7850 7850 Insulated - ODE only L67 Z 140-S449-385 385 525 660 835 990 1175 2550 3925 3925 5530 Couplings er Supplied H10 Z 140-S449 140-S449 325 325 325 325 325 325 480 480 480 480 480 Export Packaging Special B10 Z 140-S449 140-S449 cf cf cf cf cf cf cf cf cf cf cf Fans Bronze M10 Z 140-S449 140-S449 418 418 540 575 720 870 910 1014 1400 1400 1400 For further details please refer to section 9 For availability on Flanges and End shields as Options see page 9-14 S449 Dimensions 3-54 2009-2010 Low Voltage AC Selection and Pricing Guide

Options (SD ) Description Code Order Code Pos SD10 List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Insulation Class H C00 Z 140-S449 140-S449 82 82 82 105 175 230 294 425 606 1573 1573 Vacuum Pressure Impregnation (VPI) C01 Z 140-S449 140-S449 1120 1120 1120 1120 1440 1440 1820 2300 2500 2500 3600 Moisture/Powerhouse C04 Z 140-S449 140-S449 105 105 105 137 227 294 373 524 722 1234 1234 (extra dip & bake) Tropicalization C08 Z 140-S449 140-S449 146 146 146 189 314 405 510 708 961 1528 1528 Moisture (extra dip & bake, fungus spray) Leads / Terminal Blocks Terminal Block - 3 lead K83 Z 140-360 140-360 150 150 150 225 225 330 330 - - - - only Leads, Special Cable Y85 Z 140-S449 140-S449 cf cf cf cf cf cf cf cf cf cf cf Length Lubrication Special Grease (High & L57 Z 140-S449 140-S449 325 600 600 600 600 825 825 1100 1100 1100 1100 Low Temp) (Mobil 28) Special Grease (Mobilith L58 Z 140-S449 140-S449 225 225 225 225 225 425 425 425 425 425 425 SHC 100) Paint Paint - 3 Part Epoxy N01 Z 140-S449 140-S449 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 (Carboline or Ameron) Paint - 2 Part Epoxy N02 Z 140-S449 140-S449 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 Standard Primer Only N03 Z 140-S449 140-S449 385 385 385 385 385 385 385 385 385 385 385 Standard Paint, Special Y60 Z 140-S449 140-S449 385 385 385 385 385 385 385 385 385 385 385 Color Special Paint, Special Color Y61 Z 140-S449 140-S449 cf cf cf cf cf cf cf cf cf cf cf For further details please refer to section 9 S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 3-55 Dimensions

Introduction General Purpose Duty Duty Options (SD ) Description Code Order Code Pos SD10 List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Protective Devices - Windings PTC thermistors, 3 B 15 140-S449 140-S449 425 425 425 425 425 425 425 425 425 425 425 embedded temperature sensors for tripping PTC thermistors, 6 C 15 140-S449 140-S449 850 850 850 850 850 850 850 850 850 850 850 embedded temperature sensors for alarm and tripping KTY84-130, 2 F 15 140-S449 140-S449 658 658 658 658 658 658 658 658 658 658 658 embedded temperature sensors Thermocouples, coil J 15 360-S449 360-S449 - - - - - - 1186 1186 1186 1186 1186 head Winding temperature protection, Stator RTD's (coil head, 1 per phase), 100Ω Platinum, complete with auxiliary box with terminal strip opposite to main box K 15 360-S449 360-S449 - - - - - - 1996 1996 1996 1996 1996 Protective Devices - Bearings Bearing thermal A51 Z 400-S449 400-S449 - - - - - - - 2200 2200 2200 2200 protection, Bearing RTDs with connection head and terminal block - both ends, 100Ω Platinum Shafts Carbon Steel (C4140) M57 Z 400-S449 400-S449 - - - - - - - 2975 3190 3365 3365 Shaft DE Special to Y50 Z 140-S449 140-S449 cf cf cf cf cf cf cf cf cf cf cf er Specifications Shaft ODE Special to Y51 Z 140-S449 140-S449 cf cf cf cf cf cf cf cf cf cf cf er Specifications NEMA Standard Short M53 Z 140-S449 140-S449 91 91 91 122 185 266 301 333 368 368 368 Shaft - ODE NEMA Standard Long Shaft - ODE M52 Z 140-S449 140-S449 91 91 91 122 185 266 301 333 368 368 368 For further details please refer to section 9 S449 Dimensions Purpose 3-56 2009-2010 Low Voltage AC Selection and Pricing Guide

Options (SD ) Description Code Order Code Pos SD10 List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Software Nonstandard Dimension F43 Z 140-S449 140-S449 350 350 350 350 350 350 350 350 350 350 350 Sheet er Specific F50 Z 140-S449 140-S449 350 350 350 350 350 350 350 350 350 350 350 Sheets Special Calculated F07 Z 140-S449 140-S449 850 850 850 850 850 850 850 850 850 850 850 Testing Routine Test Report - F12 Z 140-S449-1100 1100 1100 1100 1100 1320 1500 1720 1860 2420 3040 (Witnessed) Complete Test F15 Z 140-S449 140-S449 4560 4560 4560 4560 4560 5300 6480 7400 8040 8960 13520 Complete Test F17 Z 140-S449 140-S449 6840 6840 6840 6840 6840 7960 9720 11100 12060 13440 20280 (Witnessed) Calibration Test F27 Z 140-S449 140-S449 3420 3420 3420 3420 3420 3975 4860 5550 6030 6720 10140 Electrical Duplicate - F36 Z 140-S449 140-S449 200 200 200 200 200 200 200 200 200 200 200 (Routine Test) Electrical Duplicate F37 Z 140-S449 140-S449 300 300 300 300 300 300 300 300 300 300 300 (Complete Test) Noise F30 Z 140-S449 140-S449 2800 2800 2800 2800 2800 2800 3600 3600 3600 3600 3600 Noise (Witnessed) F32 Z 140-S449 140-S449 4400 4400 4400 4400 4400 4400 5200 5200 5200 5200 5200 Routine Test Report F22 Z 140-S449 140-S449 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 with Vibration Test (Witnessed) Vertical Jacking Vertical Jacking M39 Z 280-S449 280-S449 - - - - 600 600 600 600 600 600 600 Provision Vibration Detectors Vibraswitch Robert A66 Z 280-S449 280-S449 - - - - 2650 2650 2650 3250 3250 3250 3250 Shaw malfunction detector Model 366 - D8 120VAC Provision for vibration sensors (PMC/Beta) on D.E. & O.D.E A67 Z 280-S449 280-S449 - - - - 2375 2375 2375 2875 2875 2875 2875 For further details please refer to section 9 S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 3-57 Dimensions

Introduction General Purpose Duty Options (SD ) Description Voltage Special Voltage 200-460V Special Voltage 461-600V Code 9-0 + M1Y 9-0 + M2Y Order Code Pos 12, 13+Z 12, 13+Z SD10 List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 140-S449 140-S449 81 81 81 112 134 323 366 479 796 979 979 140-S449 140-S449 81 81 81 112 134 323 366 479 796 979 979 Part Winding Start - 20 12&13 280-360 280-360 - - - - 104 126 185 - - - - 200V, 60Hz Part Winding Start - 21 12&13 280-360 280-360 - - - - 104 126 185 - - - - 230V, 60Hz Part Winding Start - 22 12&13 280-S449 280-S449 - - - - 104 126 185 290 482 506 506 460V, 60Hz Part Winding Start - 23 12&13 280-S449 280-S449 - - - - 104 126 185 290 482 506 506 575V, 60Hz Wye Start - Delta Run - 30 12&13 280-360 280-360 - - - - 104 126 185 - - - - 200V, 60Hz Wye Start - Delta Run - 31 12&13 280-360 280-360 - - - - 104 126 185 - - - - 230V, 60Hz Wye Start - Delta Run - 32 12&13 280-S449 280-S449 - - - - 104 126 185 290 482 506 506 460V, 60Hz Wye Start - Delta Run - 575V, 60Hz 33 12&13 280-S449 280-S449 - - - - 104 126 185 290 482 506 506 For further details please refer to section 9 S449 Dimensions Duty Purpose 3-58 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty - TEFC RGZZESD - Class I, Group D, Class II, Groups F & G, Division 1 RGZZESD high efficiency explosionproof motors are UL listed for dust ignition proof environments, and are suitable for use in Class I, Group D, Class II, Groups F & G, Division 1 hazardous areas. They are ideal for use in applications such as chemical processing, grain handling & pulp and paper. Specifications 1 to 300 HP 1.0 service factor, 40ºC ambient T3B temperature code (T3C / Group C & D available as a custom option) 900, 1200, 1800, or 3600 RPM 3 phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25HP and above; 200 & 575 volt available Class F insulation, Class B temperature rise NEMA design B, continuous duty 143T through 449T frame Features for Long Life Frame and End Shields Cast iron frame and end shields for exceptional structural integrity, with sintered condensation / breather drains on 404T 449T frames. Lifting eyebolts are included for motors > 75 lbs. Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary Class F non-hygroscopic insulation system with NEMA Class B temperature rise, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. Two seriesconnected normally closed Class B thermostats are supplied as standard. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized single shielded bearings with cast iron inner caps. Alemite grease fittings on the inlets, and pipe plugs on the relief ports for ease of routine maintenance. Frames 143T 256T are equipped with a shaft seal on the drive end; 284T 449T frames have a drive end V-ring slinger for added bearing life. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split and rotatable in 90º increments for quick and easy connections. A ground lug is included. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & Cutsom All Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 4-1 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty - TEFC RGZZESD - Class I, Group D, Class II, Groups F & G, Division 1 HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 1800 143T 230/460 RGZZESD Ball 1MB29211AB216AG3 534 SA-7XXP 1.5 82.5 65 1 1800 143T 575 RGZZESD Ball 1MB29211AB213AG3 534 SA-7XXP 1.2 82.5 60 1 1200 145T 230/460 RGZZESD Ball 1MB29211AC316AG3 623 SA-7XXP 1.8 80 70 1 1200 145T 575 RGZZESD Ball 1MB29211AC313AG3 623 SA-7XXP 1.44 80 70 1 900 182T 230/460 RGZZESD Ball 1MB29211CD116AG3 1153 SA-7XXP 1.9 78.5 113 1 900 182T 575 RGZZESD Ball 1MB29211CD113AG3 1153 SA-7XXP 1.52 78.5 113 1.5 3600 143T 230/460 RGZZESD Ball 1MB29211AA216AG3 560 SA-7XXP 2 82.5 60 1.5 3600 143T 575 RGZZESD Ball 1MB29211AA213AG3 560 SA-7XXP 1.6 82.5 60 1.5 1800 145T 230/460 RGZZESD Ball 1MB29211AB316AG3 575 SA-7XXP 2.2 84 70 1.5 1800 145T 575 RGZZESD Ball 1MB29211AB313AG3 575 SA-7XXP 1.76 84 75 1.5 1200 182T 230/460 RGZZESD Ball 1MB29211CC116AG3 682 SA-7XXP 2.3 85.5 100 1.5 1200 182T 575 RGZZESD Ball 1MB29211CC113AG3 682 SA-7XXP 1.84 85.5 100 1.5 900 184T 230/460 RGZZESD Ball 1MB29211CD316AG3 1360 SA-7XXP 2.6 80 117 1.5 900 184T 575 RGZZESD Ball 1MB29211CD313AG3 1360 SA-7XXP 2.08 80 117 2 3600 145T 230/460 RGZZESD Ball 1MB29211AA316AG3 638 SA-7XXP 2.5 84 70 2 3600 145T 575 RGZZESD Ball 1MB29211AA313AG3 638 SA-7XXP 2 84 70 2 1800 145T 230/460 RGZZESD Ball 1MB29211AB416AG3 616 SA-7XXP 2.9 84 70 2 1800 145T 575 RGZZESD Ball 1MB29211AB413AG3 616 SA-7XXP 2.32 84 70 2 1200 184T 230/460 RGZZESD Ball 1MB29211CC316AG3 772 SA-7XXP 3 86.5 120 2 1200 184T 575 RGZZESD Ball 1MB29211CC313AG3 772 SA-7XXP 2.4 86.5 120 2 900 213T 230/460 RGZZESD Ball 1MB29212AD116AG3 1632 SA-7XXP 3.3 82.5 153 2 900 213T 575 RGZZESD Ball 1MB29212AD113AG3 1632 SA-7XXP 2.64 82.5 153 3 3600 182T 230/460 RGZZESD Ball 1MB29211CA116AG3 698 SA-7XXP 3.6 86.5 100 3 3600 182T 575 RGZZESD Ball 1MB29211CA113AG3 698 SA-7XXP 2.88 86.5 100 3 1800 182T 230/460 RGZZESD Ball 1MB29211CB116AG3 695 SA-7XXP 3.9 87.5 100 3 1800 182T 575 RGZZESD Ball 1MB29211CB113AG3 695 SA-7XXP 3.12 87.5 100 3 1200 213T 230/460 RGZZESD Ball 1MB29212AC116AG3 942 SA-7XXP 4 87.5 160 3 1200 213T 575 RGZZESD Ball 1MB29212AC113AG3 942 SA-7XXP 3.2 87.5 160 3 900 215T 230/460 RGZZESD Ball 1MB29212AD216AG3 1962 SA-7XXP 4.7 84 171 3 900 215T 575 RGZZESD Ball 1MB29212AD213AG3 1962 SA-7XXP 3.76 84 171 5 3600 184T 230/460 RGZZESD Ball 1MB29211CA316AG3 854 SA-7XXP 5.8 87.5 120 5 3600 184T 575 RGZZESD Ball 1MB29211CA313AG3 854 SA-7XXP 4.64 87.5 120 5 1800 184T 230/460 RGZZESD Ball 1MB29211CB316AG3 779 SA-7XXP 6.5 87.5 125 5 1800 184T 575 RGZZESD Ball 1MB29211CB313AG3 779 SA-7XXP 5.2 87.5 115 5 1200 215T 230/460 RGZZESD Ball 1MB29212AC216AG3 1230 SA-7XXP 6.8 88.5 180 5 1200 215T 575 RGZZESD Ball 1MB29212AC213AG3 1230 SA-7XXP 5.44 88.5 180 5 900 254T 230/460 RGZZESD Ball 1MB29212BD116AG3 2049 SA-7XXP 7.5 86.5 292 5 900 254T 575 RGZZESD Ball 1MB29212BD113AG3 2049 SA-7XXP 6 86.5 292 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Stock Model 4-2 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty - TEFC RGZZESD - Class I, Group D, Class II, Groups F & G, Division 1 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 7.5 3600 213T 230/460 RGZZESD Ball 1MB29212AA116AG3 1034 SA-7XXP 8.8 88.5 160 7.5 3600 213T 575 RGZZESD Ball 1MB29212AA113AG3 1034 SA-7XXP 7.04 88.5 160 7.5 1800 213T 230/460 RGZZESD Ball 1MB29212AB116AG3 1029 SA-7XXP 9.5 89.5 160 7.5 1800 213T 575 RGZZESD Ball 1MB29212AB113AG3 1029 SA-7XXP 7.6 89.5 160 7.5 1200 254T 230/460 RGZZESD Ball 1MB29212BC116AG3 1598 SA-7XXP 9.8 90.2 265 7.5 1200 254T 575 RGZZESD Ball 1MB29212BC113AG3 1598 SA-7XXP 7.84 90.2 265 7.5 900 256T 230/460 RGZZESD Ball 1MB29212BD216AG3 2513 SA-7XXP 12 87.5 324 7.5 900 256T 575 RGZZESD Ball 1MB29212BD213AG3 2513 SA-7XXP 9.6 87.5 324 10 3600 215T 230/460 RGZZESD Ball 1MB29212AA216AG3 1169 SA-7XXP 12 89.5 180 10 3600 215T 575 RGZZESD Ball 1MB29212AA213AG3 1169 SA-7XXP 9.6 89.5 180 10 1800 215T 230/460 RGZZESD Ball 1MB29212AB216AG3 1191 SA-7XXP 13 89.5 180 10 1800 215T 575 RGZZESD Ball 1MB29212AB213AG3 1191 SA-7XXP 10.4 89.5 180 10 1200 256T 230/460 RGZZESD Ball 1MB29212BC216AG3 1891 SA-7XXP 13 90.2 325 10 1200 256T 575 RGZZESD Ball 1MB29212BC213AG3 1891 SA-7XXP 10.4 90.2 325 10 900 284T 230/460 RGZZESD Ball 1MB29212CD116AG3 3039 SA-7XXP 15 91 410 10 900 284T 575 RGZZESD Ball 1MB29212CD113AG3 3039 SA-7XXP 12 91 410 15 3600 254T 230/460 RGZZESD Ball 1MB29212BA116AG3 1559 SA-7XXP 17 90.2 265 15 3600 254T 575 RGZZESD Ball 1MB29212BA113AG3 1559 SA-7XXP 13.6 90.2 265 15 1800 254T 230/460 RGZZESD Ball 1MB29212BB116AG3 1536 SA-7XXP 19 91.7 265 15 1800 254T 575 RGZZESD Ball 1MB29212BB113AG3 1536 SA-7XXP 15.2 91.7 265 15 1200 284T 230/460 RGZZESD Ball 1MB29212CC116AG3 2568 SA-7XXP 20 91 410 15 1200 284T 575 RGZZESD Ball 1MB29212CC113AG3 2568 SA-7XXP 16 91 410 15 900 286T 230/460 RGZZESD Ball 1MB29212CD216AG3 3825 SA-7XXP 23 91 460 15 900 286T 575 RGZZESD Ball 1MB29212CD213AG3 3825 SA-7XXP 18.4 91 460 20 3600 256T 230/460 RGZZESD Ball 1MB29212BA216AG3 1864 SA-7XXP 23 90.2 325 20 3600 256T 575 RGZZESD Ball 1MB29212BA213AG3 1864 SA-7XXP 18.4 90.2 325 20 1800 256T 230/460 RGZZESD Ball 1MB29212BB216AG3 1845 SA-7XXP 26 91.7 325 20 1800 256T 575 RGZZESD Ball 1MB29212BB213AG3 1845 SA-7XXP 20.8 91.7 325 20 1200 286T 230/460 RGZZESD Ball 1MB29212CC216AG3 3036 SA-7XXP 26 91.7 460 20 1200 286T 575 RGZZESD Ball 1MB29212CC213AG3 3036 SA-7XXP 20.8 91.7 460 20 900 324T 230/460 RGZZESD Ball 1MB29213AD116AG3 4780 SA-7XXP 31 91 589 20 900 324T 575 RGZZESD Ball 1MB29213AD113AG3 4780 SA-7XXP 24.8 91 589 25 3600 284TS 460 RGZZESD Ball 1MB29212DA112AG3 2383 SA-7XXP 29 91.7 410 25 3600 284TS 575 RGZZESD Ball 1MB29212DA113AG3 2383 SA-7XXP 23.2 91.7 410 25 1800 284T 460 RGZZESD Ball 1MB29212CB112AG3 2295 SA-7XXP 29 93 410 25 1800 284T 575 RGZZESD Ball 1MB29212CB113AG3 2295 SA-7XXP 23.2 93 410 25 1200 324T 460 RGZZESD Ball 1MB29213AC112AG3 3788 SA-7XXP 33 92.4 589 25 1200 324T 575 RGZZESD Ball 1MB29213AC113AG3 3788 SA-7XXP 26.4 92.4 589 25 900 326T 460 RGZZESD Ball 1MB29213AD212AG3 5761 SA-7XXP 38 90.2 645 25 900 326T 575 RGZZESD Ball 1MB29213AD213AG3 5761 SA-7XXP 30.4 90.2 645 Stock Model Introduction General Purpose Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V 2009-2010 Low Voltage AC Selection and Pricing Guide 4-3 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty - TEFC RGZZESD - Class I, Group D, Class II, Groups F & G, Division 1 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 30 3600 286TS 460 RGZZESD Ball 1MB29212DA212AG3 2710 SA-7XXP 34 91.7 460 30 3600 286TS 575 RGZZESD Ball 1MB29212DA213AG3 2710 SA-7XXP 27.2 91.7 460 30 1800 286T 460 RGZZESD Ball 1MB29212CB212AG3 2598 SA-7XXP 35 93 460 30 1800 286T 575 RGZZESD Ball 1MB29212CB213AG3 2598 SA-7XXP 28 93 460 30 1200 326T 460 RGZZESD Ball 1MB29213AC212AG3 4268 SA-7XXP 39 92.4 645 30 1200 326T 575 RGZZESD Ball 1MB29213AC213AG3 4268 SA-7XXP 31.2 92.4 645 30 900 364T 460 RGZZESD Ball 1MB29213CD112AG3 6504 SA-7XXP 47 91 865 30 900 364T 575 RGZZESD Ball 1MB29213CD113AG3 6504 SA-7XXP 37.6 91 865 40 3600 324TS 460 RGZZESD Ball 1MB29213BA112AG3 3637 SA-7XXP 45 93.6 589 40 3600 324TS 575 RGZZESD Ball 1MB29213BA113AG3 3637 SA-7XXP 36 93.6 589 40 1800 324T 460 RGZZESD Ball 1MB29213AB112AG3 3510 SA-7XXP 47 93.6 589 40 1800 324T 575 RGZZESD Ball 1MB29213AB113AG3 3510 SA-7XXP 37.6 93.6 589 40 1200 364T 460 RGZZESD Ball 1MB29213CC112AG3 5812 SA-7XXP 52 93.6 865 40 1200 364T 575 RGZZESD Ball 1MB29213CC113AG3 5812 SA-7XXP 41.6 93.6 865 40 900 365T 460 RGZZESD Ball 1MB29213CD212AG3 7698 SA-7XXP 63 91.7 915 40 900 365T 575 RGZZESD Ball 1MB29213CD213AG3 7698 SA-7XXP 50.4 91.7 915 50 3600 326TS 460 RGZZESD Ball 1MB29213BA212AG3 4521 SA-7XXP 55 93.6 738 50 3600 326TS 575 RGZZESD Ball 1MB29213BA213AG3 4521 SA-7XXP 44 93.6 738 50 1800 326T 460 RGZZESD Ball 1MB29213AB212AG3 4167 SA-7XXP 58 93.6 645 50 1800 326T 575 RGZZESD Ball 1MB29213AB213AG3 4167 SA-7XXP 46.4 93.6 645 50 1200 365T 460 RGZZESD Ball 1MB29213CC212AG3 6542 SA-7XXP 66 93.6 915 50 1200 365T 575 RGZZESD Ball 1MB29213CC213AG3 6542 SA-7XXP 52.8 93.6 915 50 900 404T 460 RGZZESD Ball 1MB29214AD112AG3 9340 SA-7XXP 67 91.7 1230 50 900 404T 575 RGZZESD Ball 1MB29214AD113AG3 9340 SA-7XXP 53.6 91.7 1230 60 3600 364TS 460 RGZZESD Ball 1MB29213DA112AG3 5911 SA-7XXP 68 93.6 865 60 3600 364TS 575 RGZZESD Ball 1MB29213DA113AG3 5911 SA-7XXP 54.4 93.6 865 60 1800 364T 460 RGZZESD Ball 1MB29213CB112AG3 5867 SA-7XXP 71 93.6 865 60 1800 364T 575 RGZZESD Ball 1MB29213CB113AG3 5867 SA-7XXP 56.8 93.6 865 60 1200 404T 460 RGZZESD Ball 1MB29214AC112AG3 7826 SA-7XXP 74 94.1 1230 60 1200 404T 575 RGZZESD Ball 1MB29214AC113AG3 7826 SA-7XXP 59.2 94.1 1230 60 900 405T 460 RGZZESD Ball 1MB29214AD212AG3 10514 SA-7XXP 78 91.7 1335 60 900 405T 575 RGZZESD Ball 1MB29214AD213AG3 10514 SA-7XXP 62.4 91.7 1335 75 3600 365TS 460 RGZZESD Ball 1MB29213DA212AG3 7220 SA-7XXP 85 94.1 915 75 3600 365TS 575 RGZZESD Ball 1MB29213DA213AG3 7220 SA-7XXP 68 94.1 915 75 1800 365T 460 RGZZESD Ball 1MB29213CB212AG3 7225 SA-7XXP 87 94.1 915 75 1800 365T 575 RGZZESD Ball 1MB29213CB213AG3 7225 SA-7XXP 69.6 94.1 915 75 1200 405T 460 RGZZESD Ball 1MB29214AC212AG3 9003 SA-7XXP 93 94.5 1335 75 1200 405T 575 RGZZESD Ball 1MB29214AC213AG3 9003 SA-7XXP 74.4 94.5 1335 75 900 444T 460 RGZZESD Roller 1MB29214CD112AG3 13836 SA-7XXP 94 93 1700 75 900 444T 575 RGZZESD Roller 1MB29214CD113AG3 13836 SA-7XXP 75.2 93 1700 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Stock Model 4-4 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty - TEFC RGZZESD - Class I, Group D, Class II, Groups F & G, Division 1 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 100 3600 405TS 460 RGZZESD Ball 1MB29214BA212AG3 9701 SA-7XXP 108 94.1 1335 100 3600 405TS 575 RGZZESD Ball 1MB29214BA213AG3 9701 SA-7XXP 86.4 94.1 1335 100 1800 405T 460 RGZZESD Ball 1MB29214AB212AG3 9036 SA-7XXP 113 94.5 1335 100 1800 405T 575 RGZZESD Ball 1MB29214AB213AG3 9036 SA-7XXP 90.4 94.5 1335 100 1200 444T 460 RGZZESD Roller 1MB29214CC112AG3 12089 SA-7XXP 117 94.5 1700 100 1200 444T 575 RGZZESD Roller 1MB29214CC113AG3 12089 SA-7XXP 93.6 94.5 1700 100 900 445T 460 RGZZESD Roller 1MB29214CD212AG3 16772 SA-7XXP 123 94.1 1900 100 900 445T 575 RGZZESD Roller 1MB29214CD213AG3 16772 SA-7XXP 98.4 94.1 1900 125 3600 444TS 460 RGZZESD Ball 1MB29214DA112AG3 12674 SA-7XXP 138 94.5 1700 125 3600 444TS 575 RGZZESD Ball 1MB29214DA113AG3 12674 SA-7XXP 110.4 94.5 1700 125 1800 444TS 460 RGZZESD Ball 1MB29214DB112AG3 11878 SA-7XXP 143 95 1700 125 1800 444T 460 RGZZESD Roller 1MB29214CB112AG3 11878 SA-7XXP 143 95 1700 125 1800 B444T 460 RGZZESD Ball 1MB29214EB112AG3 11878 SA-7XXP 143 95 1700 125 1800 444TS 575 RGZZESD Ball 1MB29214DB113AG3 11878 SA-7XXP 114.4 95 1700 125 1800 444T 575 RGZZESD Roller 1MB29214CB113AG3 11878 SA-7XXP 114.4 95 1700 125 1200 445T 460 RGZZESD Roller 1MB29214CC212AG3 14614 SA-7XXP 144 94.5 1900 125 1200 445T 575 RGZZESD Roller 1MB29214CC213AG3 14614 SA-7XXP 115.2 94.5 1900 125 900 447T 460 RGZZESD Roller 1MB29214CD312AG3 18056 SA-7XXP 152 93.6 2450 125 900 447T 575 RGZZESD Roller 1MB29214CD313AG3 18056 SA-7XXP 121.6 93.6 2450 150 3600 445TS 460 RGZZESD Ball 1MB29214DA212AG3 14940 SA-7XXP 164 95 1900 150 3600 445TS 575 RGZZESD Ball 1MB29214DA213AG3 14940 SA-7XXP 131.2 95 1900 150 1800 445TS 460 RGZZESD Ball 1MB29214DB212AG3 13578 SA-7XXP 170 95.8 1900 150 1800 445T 460 RGZZESD Roller 1MB29214CB212AG3 13578 SA-7XXP 170 95.8 1900 150 1800 B445T 460 RGZZESD Ball 1MB29214EB212AG3 13578 SA-7XXP 170 95.8 1900 150 1800 445TS 575 RGZZESD Ball 1MB29214DB213AG3 13578 SA-7XXP 136 95.8 1900 150 1800 445T 575 RGZZESD Roller 1MB29214CB213AG3 13578 SA-7XXP 136 95.8 1900 150 1200 447T 460 RGZZESD Roller 1MB29214CC312AG3 16171 SA-7XXP 170 95 2450 150 1200 447T 575 RGZZESD Roller 1MB29214CC313AG3 16171 SA-7XXP 136 95 2450 150 900 449T 460 RGZZESD Roller 1MB29214CD512AG3 22503 SA-7XXP 186 94.1 2535 150 900 449T 575 RGZZESD Roller 1MB29214CD513AG3 22503 SA-7XXP 148.8 94.1 2535 200 3600 447TS 460 RGZZESD Ball 1MB29214DA312AG3 18801 SA-7XXP 216 95 2450 200 3600 447TS 575 RGZZESD Ball 1MB29214DA313AG3 18801 SA-7XXP 172.8 95 2450 200 1800 447TS 460 RGZZESD Ball 1MB29214DB312AG3 16486 SA-7XXP 225 95.8 2450 200 1800 447T 460 RGZZESD Roller 1MB29214CB312AG3 16486 SA-7XXP 225 95.8 2450 200 1800 B447T 460 RGZZESD Ball 1MB29214EB312AG3 16486 SA-7XXP 225 95.8 2450 200 1800 447TS 575 RGZZESD Ball 1MB29214DB313AG3 16486 SA-7XXP 180 95.8 2450 200 1800 447T 575 RGZZESD Roller 1MB29214CB313AG3 16486 SA-7XXP 180 95.8 2450 200 1200 449T 460 RGZZESD Roller 1MB29214CC512AG3 19005 SA-7XXP 226 95 2535 200 1200 449T 575 RGZZESD Roller 1MB29214CC513AG3 19005 SA-7XXP 180.8 95 2535 200 1200 B449T 460 RGZZESD Ball 1MB29214EC512AG3 19005 SA-7XXP 226 95 2535 200 900 449T 460 RGZZESD Roller 1MB29214CD612AG3 23829 SA-7XXP 241 94.5 2535 200 900 449T 575 RGZZESD Roller 1MB29214CD613AG3 23829 SA-7XXP 192.8 94.5 2535 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 4-5 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty - TEFC RGZZESD - Class I, Group D, Class II, Groups F & G, Division 1 HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing 4-6 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 250 3600 449TS 460 RGZZESD Ball 1MB29214DA512AG3 22381 SA-7XXP 267 95.4 2535 250 3600 449TS 575 RGZZESD Ball 1MB29214DA513AG3 22381 SA-7XXP 213.6 95.4 2535 Stock Model 250 1800 449T 460 RGZZESD Roller 1MB29214CB512AG3 19289 SA-7XXP 281 95.8 2535 250 1800 449TS 460 RGZZESD Ball 1MB29214DB512AG3 19289 SA-7XXP 281 95.8 2535 250 1800 449TS 575 RGZZESD Ball 1MB29214DB513AG3 19289 SA-7XXP 224.8 95.8 2535 250 1800 B449T 460 RGZZESD Ball 1MB29214EB512AG3 19289 SA-7XXP 281 95.8 2535 250 1200 449TS 460 RGZZESD Ball 1MB29214DC612AG3 22615 SA-7XXP 280 95 2535 250 1200 449TS 575 RGZZESD Ball 1MB29214DC613AG3 22615 SA-7XXP 224 95 2535 300 3600 449TS 460 RGZZESD Ball 1MB29214DA612AG3 29100 SA-7XXP 323 95.8 2535 300 3600 449TS 575 RGZZESD Ball 1MB29214DA613AG3 29100 SA-7XXP 258.4 95.8 2535 300 1800 449T 460 RGZZESD Roller 1MB29214CB612AG3 21928 SA-7XXP 346 95.4 2535 300 1800 449TS 460 RGZZESD Ball 1MB29214DB612AG3 21928 SA-7XXP 346 95.4 2535 300 1800 449TS 575 RGZZESD Ball 1MB29214DB613AG3 21928 SA-7XXP 276.8 95.4 2535 C-Face, Vertical with Drip Cover, Footless 1 1800 143TCV 230/460 RGZZESD Ball 1MB29211AB216LG3 697 SA-7XXP 1.5 82.5 60 1 1200 145TCV 230/460 RGZZESD Ball 1MB29211AC316LG3 785 SA-7XXP 1.8 80 80 1 900 182TCV 230/460 RGZZESD Ball 1MB29211CD116LG3 1315 SA-7XXP 1.9 78.5 130 1.5 3600 143TCV 230/460 RGZZESD Ball 1MB29211AA216LG3 722 SA-7XXP 2 82.5 70 1.5 1800 145TCV 230/460 RGZZESD Ball 1MB29211AB316LG3 737 SA-7XXP 2.2 84 80 1.5 1200 182TCV 230/460 RGZZESD Ball 1MB29211CC116LG3 845 SA-7XXP 2.3 85.5 130 1.5 900 184TCV 230/460 RGZZESD Ball 1MB29211CD316LG3 1522 SA-7XXP 2.6 80 135 2 3600 145TCV 230/460 RGZZESD Ball 1MB29211AA316LG3 800 SA-7XXP 2.5 84 72 2 1800 145TCV 230/460 RGZZESD Ball 1MB29211AB416LG3 778 SA-7XXP 2.9 84 80 2 1200 184TCV 230/460 RGZZESD Ball 1MB29211CC316LG3 934 SA-7XXP 3 86.5 135 2 900 213TCV 230/460 RGZZESD Ball 1MB29212AD116LG3 1794 SA-7XXP 3.3 82.5 175 3 3600 182TCV 230/460 RGZZESD Ball 1MB29211CA116LG3 860 SA-7XXP 3.6 86.5 130 3 1800 182TCV 230/460 RGZZESD Ball 1MB29211CB116LG3 857 SA-7XXP 3.9 87.5 130 3 1200 213TCV 230/460 RGZZESD Ball 1MB29212AC116LG3 1105 SA-7XXP 4 87.5 175 3 900 215TCV 230/460 RGZZESD Ball 1MB29212AD216LG3 2125 SA-7XXP 4.7 84 195 5 3600 184TCV 230/460 RGZZESD Ball 1MB29211CA316LG3 1016 SA-7XXP 5.8 87.5 135 5 1800 184TCV 230/460 RGZZESD Ball 1MB29211CB316LG3 941 SA-7XXP 6.5 87.5 135 5 1200 215TCV 230/460 RGZZESD Ball 1MB29212AC216LG3 1392 SA-7XXP 6.8 88.5 195 5 900 254TCV 230/460 RGZZESD Ball 1MB29212BD116LG3 2266 SA-7XXP 7.5 86.5 295 7.5 3600 213TCV 230/460 RGZZESD Ball 1MB29212AA116LG3 1196 SA-7XXP 8.8 88.5 175 7.5 1800 213TCV 230/460 RGZZESD Ball 1MB29212AB116LG3 1191 SA-7XXP 9.5 89.5 175 7.5 1200 254TCV 230/460 RGZZESD Ball 1MB29212BC116LG3 1816 SA-7XXP 9.8 90.2 295 7.5 900 256TCV 230/460 RGZZESD Ball 1MB29212BD216LG3 2731 SA-7XXP 12 87.5 365 10 3600 215TCV 230/460 RGZZESD Ball 1MB29212AA216LG3 1331 SA-7XXP 12 89.5 195 10 1800 215TCV 230/460 RGZZESD Ball 1MB29212AB216LG3 1354 SA-7XXP 13 89.5 195 10 1200 256TCV 230/460 RGZZESD Ball 1MB29212BC216LG3 2108 SA-7XXP 13 90.2 365 15 3600 254TCV 230/460 RGZZESD Ball 1MB29212BA116LG3 1776 SA-7XXP 17 90.2 295 15 1800 254TCV 230/460 RGZZESD Ball 1MB29212BB116LG3 1753 SA-7XXP 19 91.7 295 15 1200 284TCV 230/460 RGZZESD Ball 1MB29212CC116LG3 2893 SA-7XXP 20 91 450 20 3600 256TCV 230/460 RGZZESD Ball 1MB29212BA216LG3 2081 SA-7XXP 23 90.2 365 20 1800 256TCV 230/460 RGZZESD Ball 1MB29212BB216LG3 2062 SA-7XXP 26 91.7 365 20 1200 286TCV 230/460 RGZZESD Ball 1MB29212CC216LG3 3360 SA-7XXP 26 91.7 525

Duty - TEFC RGZZESD ID1 - Class I, Group D, Division 1 - T2A, 1.15SF RGZZESD ID1 high efficiency explosionproof motors are designed to meet demanding standards of performance and provide long life under oil field operating conditions. They are UL listed and CSA certified for Class I, Division 1, Group D and Class I, Zone 1, Group IIA hazardous locations and meet the requirements of IP54 for enclosure protection. Specifications 1 to 300 HP 1.15 SF @ 40ºC ambient, 1.15 SF @ 55ºC ambient (143T 447T), 1.0 SF @ 60ºC ambient 3600, 1800, 1200 or 900 RPM 3-phase, 60 Hz; 230/460 volt operation under 100 HP, 460 volt 100 HP and above, 575 volt available Meets or exceeds EPAct efficiency standards Class F insulation, Class B temperature rise NEMA design B, continuous duty 284T through 449T frame T2A temperature code (280ºC maximum surface temperature) 3600, 1800 or 1200 RPM 3 phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above; 200 & 575 volt available Class F insulation, Class B temperature rise NEMA design B, continuous duty 143T through 449T frame Features for Long Life Frame and Bearing Housings Cast iron frame and end shields for exceptional structural integrity, with sintered condensation drains on 404T 449T frames. Lifting eyebolts are included for frames 213T to 449T. Specifications table begins on the next page Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary Class F non-hygroscopic insulation system with NEMA Class B temperature rise, provides an extra margin of thermal life. Varnish system application insures maximum wire penetration to provide protection from moisture and corrosion. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized single shielded bearings with cast iron inner caps. Alemite grease fittings on the inlets, and pipe plugs on the relief ports for ease of routine maintenance. Frames 143T 256T are equipped with a shaft seal on the drive end; 284T 449T frames have a drive end V-ring slinger for added bearing life. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast iron, explosion proof construction, that is larger than industry standards, for quick and easy connections. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens motors are available with a wide variety of QuickMOD modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 4-7 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty - TEFC RGZZESD ID1 - Class I, Group D, Division 1 - T2A, 1.15SF HP RPM Frame Voltage Type Horizontal, Foot Mounted DE Bearing 4-8 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 1800 143T 230/460 RGZZESD ID1 Ball 1MB29111AB216AA3 524 SA-7XXP 1.5 82.5% 57 1 1200 145T 230/460 RGZZESD ID1 Ball 1MB29111AC316AA3 611 SA-7XXP 1.8 80.0% 65 1.5 3600 143T 230/460 RGZZESD ID1 Ball 1MB29111AA216AA3 549 SA-7XXP 2 82.5% 65 1.5 1800 145T 230/460 RGZZESD ID1 Ball 1MB29111AB316AA3 564 SA-7XXP 2.2 84.0% 62 1.5 1200 182T 230/460 RGZZESD ID1 Ball 1MB29111CC116AA3 669 SA-7XXP 2.3 85.5% 95 2 3600 145T 230/460 RGZZESD ID1 Ball 1MB29111AA316AA3 625 SA-7XXP 2.5 84.0% 75 2 1800 145T 230/460 RGZZESD ID1 Ball 1MB29111AB416AA3 604 SA-7XXP 2.9 84.0% 66 2 1800 145T 575 RGZZESD ID1 Ball 1MB29111AB413AA3 604 SA-7XXP 2.32 84.0% 66 2 1200 184T 230/460 RGZZESD ID1 Ball 1MB29111CC316AA3 757 SA-7XXP 3 86.5% 106 3 3600 182T 230/460 RGZZESD ID1 Ball 1MB29111CA116AA3 684 SA-7XXP 3.6 86.5% 92 3 1800 182T 230/460 RGZZESD ID1 Ball 1MB29111CB116AA3 681 SA-7XXP 3.9 87.5% 95 3 1800 182T 575 RGZZESD ID1 Ball 1MB29111CB113AA3 681 SA-7XXP 3.12 87.5% 95 3 1200 213T 230/460 RGZZESD ID1 Ball 1MB29112AC116AA3 924 SA-7XXP 4 87.5% 155 5 3600 184T 230/460 RGZZESD ID1 Ball 1MB29111CA316AA3 837 SA-7XXP 5.8 87.5% 104 5 1800 184T 230/460 RGZZESD ID1 Ball 1MB29111CB316AA3 764 SA-7XXP 6.5 87.5% 107 5 1800 184T 575 RGZZESD ID1 Ball 1MB29111CB313AA3 764 SA-7XXP 5.2 87.5% 107 5 1200 215T 230/460 RGZZESD ID1 Ball 1MB29112AC216AA3 1206 SA-7XXP 6.8 88.5% 178 7.5 3600 213T 230/460 RGZZESD ID1 Ball 1MB29112AA116AA3 1014 SA-7XXP 8.8 88.5% 162 7.5 1800 213T 230/460 RGZZESD ID1 Ball 1MB29112AB116AA3 1009 SA-7XXP 9.5 89.5% 168 7.5 1800 213T 575 RGZZESD ID1 Ball 1MB29112AB113AA3 1009 SA-7XXP 7.6 89.5% 168 7.5 1200 254T 230/460 RGZZESD ID1 Ball 1MB29112BC116AA3 1567 SA-7XXP 9.8 90.2% 295 10 3600 215T 230/460 RGZZESD ID1 Ball 1MB29112AA216AA3 1146 SA-7XXP 12 89.5% 176 10 1800 215T 230/460 RGZZESD ID1 Ball 1MB29112AB216AA3 1168 SA-7XXP 13 89.5% 183 10 1800 215T 575 RGZZESD ID1 Ball 1MB29112AB213AA3 1168 SA-7XXP 10.4 89.5% 183 10 1200 256T 230/460 RGZZESD ID1 Ball 1MB29112BC216AA3 1854 SA-7XXP 13 90.2% 337 15 3600 254T 230/460 RGZZESD ID1 Ball 1MB29112BA116AA3 1528 SA-7XXP 17 90.2% 265 15 1800 254T 230/460 RGZZESD ID1 Ball 1MB29112BB116AA3 1506 SA-7XXP 19 91.7% 284 15 1800 254T 575 RGZZESD ID1 Ball 1MB29112BB113AA3 1506 SA-7XXP 15.2 91.7% 284 15 1200 284T 230/460 RGZZESD ID1 Ball 1MB29112CC116AA3 2518 SA-7XXP 20 91.0% 450 20 3600 256T 230/460 RGZZESD ID1 Ball 1MB29112BA216AA3 1827 SA-7XXP 23 90.2% 302 20 1800 256T 230/460 RGZZESD ID1 Ball 1MB29112BB216AA3 1809 SA-7XXP 26 91.7% 332 20 1800 256T 575 RGZZESD ID1 Ball 1MB29112BB213AA3 1809 SA-7XXP 20.8 91.7% 332 20 1200 286T 230/460 RGZZESD ID1 Ball 1MB29112CC216AA3 2976 SA-7XXP 26 91.7% 525 Stock Model 25 3600 284TS 230/460 RGZZESD ID1 Ball 1MB29112DA116AA3 2336 SA-7XXP 29 91.7% 450 25 1800 284T 230/460 RGZZESD ID1 Ball 1MB29112CB116AA3 2250 SA-7XXP 29 93.0% 450 25 1800 284T 575 RGZZESD ID1 Ball 1MB29112CB113AA3 2250 SA-7XXP 23.2 93.0% 450 25 1200 324T 230/460 RGZZESD ID1 Ball 1MB29113AC116AA3 3714 SA-7XXP 33 92.4% 660 30 3600 286TS 230/460 RGZZESD ID1 Ball 1MB29112DA216AA3 2657 SA-7XXP 34 91.7% 525 30 1800 286T 230/460 RGZZESD ID1 Ball 1MB29112CB216AA3 2547 SA-7XXP 35 93.0% 525 30 1800 286T 575 RGZZESD ID1 Ball 1MB29112CB213AA3 2547 SA-7XXP 28 93.0% 525 30 1200 326T 230/460 RGZZESD ID1 Ball 1MB29113AC216AA3 4184 SA-7XXP 39 92.4% 690 40 3600 324TS 230/460 RGZZESD ID1 Ball 1MB29113BA116AA3 3566 SA-7XXP 45 93.6% 660 40 1800 324T 230/460 RGZZESD ID1 Ball 1MB29113AB116AA3 3441 SA-7XXP 47 93.6% 660 40 1800 324T 575 RGZZESD ID1 Ball 1MB29113AB113AA3 3441 SA-7XXP 37.6 93.6% 660 40 1200 364T 230/460 RGZZESD ID1 Ball 1MB29113CC116AA3 5698 SA-7XXP 52 93.6% 900

Duty - TEFC RGZZESD ID1 - Class I, Group D, Division 1 - T2A, 1.15SF HP RPM Frame Voltage Type Horizontal, Foot Mounted - continued DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 50 3600 326TS 230/460 RGZZESD ID1 Ball 1MB29113BA216AA3 4432 SA-7XXP 55 93.6% 690 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 50 1800 326T 230/460 RGZZESD ID1 Ball 1MB29113AB216AA3 4085 SA-7XXP 58 93.6% 690 50 1800 326T 575 RGZZESD ID1 Ball 1MB29113AB213AA3 4085 SA-7XXP 46.4 93.6% 690 50 1200 365T 230/460 RGZZESD ID1 Ball 1MB29113CC216AA3 6414 SA-7XXP 66 93.6% 915 60 3600 364TS 230/460 RGZZESD ID1 Ball 1MB29113DA116AA3 5795 SA-7XXP 68 93.6% 900 60 1800 364T 230/460 RGZZESD ID1 Ball 1MB29113CB116AA3 5752 SA-7XXP 71 93.6% 900 60 1800 364T 575 RGZZESD ID1 Ball 1MB29113CB113AA3 5752 SA-7XXP 56.8 93.6% 900 60 1200 404T 230/460 RGZZESD ID1 Ball 1MB29114AC116AA3 7673 SA-7XXP 74 94.1% 1290 75 3600 365TS 230/460 RGZZESD ID1 Ball 1MB29113DA216AA3 7078 SA-7XXP 85 94.1% 915 75 1800 365T 230/460 RGZZESD ID1 Ball 1MB29113CB216AA3 7083 SA-7XXP 87 94.1% 915 75 1800 365T 575 RGZZESD ID1 Ball 1MB29113CB213AA3 7083 SA-7XXP 69.6 94.1% 915 75 1200 405T 230/460 RGZZESD ID1 Ball 1MB29114AC216AA3 8826 SA-7XXP 93 94.5% 1420 100 3600 405TS 230/460 RGZZESD ID1 Ball 1MB29114BA216AA3 9511 SA-7XXP 108 94.1% 1420 100 1800 405T 230/460 RGZZESD ID1 Ball 1MB29114AB216AA3 8859 SA-7XXP 113 94.5% 1420 100 1800 405T 575 RGZZESD ID1 Ball 1MB29114AB213AA3 8859 SA-7XXP 90.4 94.5% 1420 100 1200 444T 230/460 RGZZESD ID1 Roller 1MB29114CC116AA3 11852 SA-7XXP 117 94.5% 1740 100 1200 B444T 230/460 RGZZESD ID1 Ball 1MB29114EC116AA3 11852 SA-7XXP 117 94.5% 1740 125 3600 444TS 460 RGZZESD ID1 Ball 1MB29114DA112AA3 12425 SA-7XXP 138 94.5% 1740 125 1800 444T 460 RGZZESD ID1 Roller 1MB29114CB112AA3 11645 SA-7XXP 143 95.0% 1740 125 1800 B444T 460 RGZZESD ID1 Ball 1MB29114EB112AA3 11645 SA-7XXP 143 95.0% 1740 125 1800 444T 575 RGZZESD ID1 Roller 1MB29114CB113AA3 11645 SA-7XXP 114.4 95.0% 1740 125 1800 B444T 575 RGZZESD ID1 Ball 1MB29114EB113AA3 11645 SA-7XXP 114.4 95.0% 1740 125 1200 445T 460 RGZZESD ID1 Roller 1MB29114CC212AA3 14327 SA-7XXP 144 94.5% 1930 125 1200 B445T 460 RGZZESD ID1 Ball 1MB29114EC212AA3 14327 SA-7XXP 144 94.5% 1930 150 3600 445TS 460 RGZZESD ID1 Ball 1MB29114DA212AA3 14647 SA-7XXP 164 95.0% 1930 150 1800 445T 460 RGZZESD ID1 Roller 1MB29114CB212AA3 13312 SA-7XXP 170 95.8% 1930 150 1800 B445T 460 RGZZESD ID1 Ball 1MB29114EB212AA3 13312 SA-7XXP 170 95.8% 1930 150 1800 445T 575 RGZZESD ID1 Roller 1MB29114CB213AA3 13312 SA-7XXP 136 95.8% 1930 150 1800 B445T 575 RGZZESD ID1 Ball 1MB29114EB213AA3 13312 SA-7XXP 136 95.8% 1930 150 1200 447T 460 RGZZESD ID1 Roller 1MB29114CC312AA3 15854 SA-7XXP 170 95.0% 2415 150 1200 B447T 460 RGZZESD ID1 Ball 1MB29114EC312AA3 15854 SA-7XXP 170 95.0% 2415 200 3600 447TS 460 RGZZESD ID1 Ball 1MB29114DA312AA3 18432 SA-7XXP 216 95.0% 2415 200 1800 447T 460 RGZZESD ID1 Roller 1MB29114CB312AA3 16163 SA-7XXP 225 95.8% 2415 200 1800 B447T 460 RGZZESD ID1 Ball 1MB29114EB312AA3 16163 SA-7XXP 225 95.8% 2415 200 1200 449T 460 RGZZESD ID1 Roller 1MB29114CC512AA3 18632 SA-7XXP 226 95.0% 2625 200 1200 B449T 460 RGZZESD ID1 Ball 1MB29114EC512AA3 18632 SA-7XXP 226 95.0% 2625 250 3600 449TS 460 RGZZESD ID1 Ball 1MB29114DA512AA3 21942 SA-7XXP 267 95.4% 2625 250 1800 449T 460 RGZZESD ID1 Roller 1MB29114CB512AA3 18911 SA-7XXP 281 95.8% 2625 250 1800 B449T 460 RGZZESD ID1 Ball 1MB29114EB512AA3 18911 SA-7XXP 281 95.8% 2625 300 3600 449TS 460 RGZZESD ID1 Ball 1MB29114DA612AA3 28529 SA-7XXP 323 95.8% 2625 300 1800 449T 460 RGZZESD ID1 Roller 1MB29114CB612AA3 21498 SA-7XXP 346 95.4% 2625 300 1800 B449T 460 RGZZESD ID1 Ball 1MB29114EB612AA3 21498 SA-7XXP 346 95.4% 2625 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V 4-9 Introduction General Purpose Duty Duty Purpose Dimensions

Duty - TEFC RGZZESD ID1 - Class I, Group D, Division 1 - T2A, 1.15SF HP RPM Frame Voltage Type Introduction C-Face, Vertical with Drip Cover, Footless DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 1800 143TCV 230/460 RGZZESD ID1 Ball 1MB29111AB216LA3 683 SA-7XXP 1.5 82.5% 57 1.5 1800 145TCV 230/460 RGZZESD ID1 Ball 1MB29111AB316LA3 723 SA-7XXP 2.2 84.0% 62 2 1800 145TCV 230/460 RGZZESD ID1 Ball 1MB29111AB416LA3 763 SA-7XXP 2.9 84.0% 66 3 1800 182TCV 230/460 RGZZESD ID1 Ball 1MB29111CB116LA3 840 SA-7XXP 3.9 87.5% 95 5 1800 184TCV 230/460 RGZZESD ID1 Ball 1MB29111CB316LA3 923 SA-7XXP 6.5 87.5% 107 7.5 1800 213TCV 230/460 RGZZESD ID1 Ball 1MB29112AB116LA3 1168 SA-7XXP 9.5 89.5% 168 10 1800 215TCV 230/460 RGZZESD ID1 Ball 1MB29112AB216LA3 1327 SA-7XXP 13 89.5% 183 15 1800 254TCV 230/460 RGZZESD ID1 Ball 1MB29112BB116LA3 1719 SA-7XXP 19 91.7% 284 20 1800 256TCV 230/460 RGZZESD ID1 Ball 1MB29112BB216LA3 2022 SA-7XXP 26 91.7% 332 25 1800 284TCV 230/460 RGZZESD ID1 Ball 1MB29112CB116LA3 2568 SA-7XXP 29 93.0% 450 30 1800 286TCV 230/460 RGZZESD ID1 Ball 1MB29112CB216LA3 2865 SA-7XXP 35 93.0% 525 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Stock Model Dimensions General Purpose Duty Duty Purpose 4-10 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty (XP ) Type / Frame List Price Adder Per Frame ($) Order 143 182 213 254 284 324 364 404 444 447 Description RGZZESD RGZZESD 1D1 Code Code 145 184 215 256 286 326 365 405 445 449 Pos S449 Altitude / Ambient Rerate/Derate Y80 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Assembly - Mounting & Terminal Box Position W-2 9+R2A 16+Z 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 W-3 9+R3A 16+Z 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 W-8 7 16 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 C-2 1 16 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 Bearings Sealed Ball bearings 1 L68 Z 140-440 140-440 160 160 160 320 320 320 400 640 640 640 800 (except 2 pole, 360+ frames) Breathers & Drain Plugs Crouse Hinds - UL Approved L46 Z 280-440 280-440 - - - - 240 240 240 240 240 240 240 Conduit Box - Main Orient 90 deg CCW J84 Z 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 Orient 180 deg CCW J85 Z 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 Orient 270 deg CCW J86 Z 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 Drip Cover Drip cover without vertical K33 Z 140-440 140-440 106 106 106 114 114 204 414 580 1072 1072 1072 lifting devices Export Packaging Sea Freight - Siemens B09 Z 140-440 140-440 225 225 225 225 510 760 760 1010 1010 1010 1010 Standard Flanged End Shields C-Face with Feet 2 E 14 140-440 140-440 143 173 197 435 602 651 703 872 1033 1033 - C-Face without Feet G 14 140-250 140-250 157 196 220 470 - - - - - - - Grounding Provision (tapped hole on L27 Z 140-440 140-440 95 95 95 110 110 125 125 125 175 175 175 frame w/bolt) Hardware Lifting Eyebolt 3 L20 Z 140 140 30 std std std std std std std std std std Duty Group D, F&G, 1.15SF M80 Z 140-250 - 235 235 235 235 - - - - - - - (Rerate) Insulation Fungus Protection C07 Z 140-440 140-440 142 142 142 208 208 208 208 360 360 360 360 Leads / Terminal Blocks Burndy Hydent type YA K80 Z 140-440 140-440 115 115 115 115 115 115 115 115 115 115 115 Sealed Leads K89 Z std std std std std std std std std std std std std Lubrication Grease Fitting / Pressure Relief L60 Z 140-440 140-440 125 125 125 125 125 125 125 125 125 125 125 Nameplate Extra M21 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Division 2 4 M22 Z - - 205 205 205 205 205 205 205 205 205 205 205 Change (Rerate/Derate) Y80 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Auxiliary Y82 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 For further details please refer to section 8 1 Sealed Ball not available for 2 pole motors with frames > 360 2 C face with fee for 440 frames, only available with ball bearings 3 Lisfting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. 2009-2010 Low Voltage AC Selection and Pricing Guide 4-11 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Duty (XP ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 RGZZESD RGZZESD 1D1 145 184 215 256 286 326 365 405 445 449 Protective Devices - Windings Thermostats, normally G 15 std - std std std std std std std std std std std closed, 2 per motor Rotation Arrow Bidirectional (not applicable K70 Z 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 for uni-directional motors) Clockwise (facing ODE) K71 Z 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 Counterclockwise (facing K72 Z 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 ODE) Service Factor Rerate/Derate Y80 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Shaft Seal Slinger & O Ring L76 Z 140-440 140-440 60 60 60 85 85 115 115 145 145 145 145 (4, 6, 8 Pole only) Software Documentation in Spanish D05 Z 140-440 140-440 0 0 0 0 0 0 0 0 0 0 0 Certificate of Compliance F00 Z 140-440 140-440 200 200 200 200 200 200 200 200 200 200 200 Standard Transmittal F40 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Standard Dimension Sheet F42 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Conduit Box Dimension Sheet F44 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Wiring Diagram F45 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 IOM F46 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Renewal Parts F47 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Sheets F49 Z 140-440 140-440 175 175 175 175 175 175 175 175 175 175 175 F03 Z 140-440 140-440 500 500 500 500 500 500 500 500 500 500 500 Testing Routine Test Report F10 Z 140-440 140-440 200 200 200 200 200 200 200 200 200 200 200 Routine Test Report with Vibration Test F20 Z 140-440 140-440 400 400 400 400 400 400 400 400 400 400 400 Voltage Single Voltage - 230V (outside leads connection only) Single Voltage - 460V (outside leads connection only) 11 12 &13 12 12 &13 For further details please refer to section 8 1 Sealed Ball not available for 2 pole motors with frames > 360 2 C face with fee for 440 frames, only available with ball bearings 3 Lisfting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. 20HP - 85 85 95 110 - - - - - - - 20HP - 85 85 95 110 - - - - - - - S449 Dimensions 4-12 2009-2010 Low Voltage AC Selection and Pricing Guide

Options Duty (XP ) Description Type / Frame List Price Adder Per Frame ($) Order RGZZESD RGZZESD 143 182 213 254 284 324 364 404 444 447 S449 Code Code 1D1 145 184 215 256 286 326 365 405 445 449 Pos Assembly - Mounting & Terminal Box Position W-6 4 16 140-440 140-440 - - - - - - - 140 140 140 140 W-7 5 16 140-440 140-440 - - - - - - - 200 200 200 - F-2 2 16 140-440 140-440 200 200 200 200 200 200 200 200 200 200 - Auxiliary boxes 1 Auxiliary conduit box location (Digit 2) XP condulet opposite to main box J 6 Z 280-400 280-400 - - - - - 400 400 400 400 400 400 Temperature detector device (Digit 1) Select the number that corresponds with the appropriate Temperature Detector Device to create your initial 3 digital ordering code. Thermostats 1 Space heaters 5 Balance Precision M69 Z 140-440 140-440 - 128 128 147 147 167 167 211 211 404 404 Extra Precision M70 Z 140-440 140-440 - 216 216 228 228 260 260 350 350 450 450 Bearings Roller Instead of Ball L65 Z 280-400 280-400 - - - - 825 825 825 825 std std std Couplings er Supplied H10 Z 140-440 140-440 325 325 325 325 325 325 480 480 480 480 480 Export Packaging Special B10 Z 140-440 140-440 cf cf cf cf cf cf cf cf cf cf cf Fans Bronze M10 Z 140-440 140-440 418 418 540 575 720 870 910 1014 1400 1400 1400 Duty Group C&D, 1.15SF M81 Z 140-250 - 235 235 235 235 - - - - - - - Group C&D, F&G, 1.0SF M82 Z 140-440 140-440 235 235 235 235 235 235 235 235 235 235 235 Only Insulation Class H C00 Z 140-440 140-440 82 82 82 105 175 230 294 425 606 1573 1573 Vacuum Pressure Impregnation (VPI) C01 Z 140-440 140-440 1120 1120 1120 1120 1440 1440 1820 2300 2500 2500 3600 Moisture/Powerhouse C04 Z 140-440 140-440 105 105 105 137 227 294 373 524 722 1234 1234 (extra dip & bake) Tropicalization Moisture C08 Z 140-440 140-440 146 146 146 189 314 405 510 708 961 1528 1528 (extra dip & bake, fungus spray) Lubrication Special Grease (High & L57 Z 140-440 140-440 325 600 600 600 600 825 825 1100 1100 1100 1100 Low Temp) (Mobil 28) Special Grease (Mobilith SHC 100) L58 Z 140-440 140-440 225 225 225 225 225 425 425 425 425 425 425 For further details please refer to section 9 For availability for Flanges and End shields as Options see page 9-14 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 4-13 Dimensions

Introduction General Purpose Duty Duty Purpose Options Duty (XP ) Description Order Code Code Pos Type / Frame List Price Adder Per Frame ($) RGZZESD RGZZESD 143 182 213 254 284 324 364 404 444 447 1D1 145 184 215 256 286 326 365 405 445 449 Paint Paint - 3 Part Epoxy N01 Z 140-440 140-440 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 (Carboline or Ameron) Paint - 2 Part Epoxy N02 Z 140-440 140-440 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 Standard Primer Only N03 Z 140-440 140-440 385 385 385 385 385 385 385 385 385 385 385 Standard Paint, Special Y60 Z 140-440 140-440 385 385 385 385 385 385 385 385 385 385 385 Color Special Paint, Special Color Y61 Z 140-440 140-440 cf cf cf cf cf cf cf cf cf cf cf Protective Devices - Windings PTC thermistors, 3 B 15 140-440 140-440 425 425 425 425 425 425 425 425 425 425 425 embedded temperature sensors for tripping PTC thermistors, 6 C 15 140-440 140-440 850 850 850 850 850 850 850 850 850 850 850 embedded temperature sensors for alarm and tripping KTY84-130, 2 F 15 140-440 140-440 658 658 658 658 658 658 658 658 658 658 658 embedded temperature sensors Thermocouples, coil J 15 360-440 360-440 - - - - - - 1186 1186 1186 1186 1186 head Winding temperature K 15 360-440 360-440 - - - - - - 1996 1996 1996 1996 1996 protection, Stator RTD's (coil head, 1 per phase), 100Ω Platinum, complete with auxiliary box with terminal strip opposite to main box Shafts Carbon Steel (C4140) M57 Z 400-440 400-440 - - - - - - - 2975 3190 3365 3365 Shaft DE Special to Y50 Z 140-440 140-440 cf cf cf cf cf cf cf cf cf cf cf er Specifications Shaft ODE Special to Y51 Z 140-440 140-440 cf cf cf cf cf cf cf cf cf cf cf er Specifications NEMA Standard Short M53 Z 140-440 140-440 91 91 91 122 185 266 301 333 368 368 368 Shaft - ODE NEMA Standard Long Shaft - ODE M52 Z 140-440 140-440 91 91 91 122 185 266 301 333 368 368 368 For further details please refer to section 9 S449 Dimensions 4-14 2009-2010 Low Voltage AC Selection and Pricing Guide

Options Duty (XP ) Description Order Code Code Pos Type / Frame List Price Adder Per Frame ($) RGZZESD RGZZESD 143 182 213 254 284 324 364 404 444 447 1D1 145 184 215 256 286 326 365 405 445 449 Shaft Seal Brass Seal L84 Z 140-440 140-440 42 42 42 44 59 72 87 102 102 102 - Software Nonstandard Dimension F43 Z 140-440 140-440 350 350 350 350 350 350 350 350 350 350 350 Sheet er Specific F50 Z 140-440 140-440 350 350 350 350 350 350 350 350 350 350 350 Sheets Special Calculated F07 Z 140-440 140-440 850 850 850 850 850 850 850 850 850 850 850 Space Heater 115V, Single Phase, Ex. A43 Z 140-440 140-440 292 292 292 292 436 436 524 640 758 856 - Proof Testing Routine Test Report - F12 Z 140-440 140-440 1100 1100 1100 1100 1100 1320 1500 1720 1860 2420 3040 (Witnessed) Complete Test F15 Z 140-440 140-440 4560 4560 4560 4560 4560 5300 6480 7400 8040 8960 13520 Complete Test (Witnessed) F17 Z 140-440 140-440 6840 6840 6840 6840 6840 7960 9720 11100 12060 13440 20280 Calibration Test F27 Z 140-440 140-440 3420 3420 3420 3420 3420 3975 4860 5550 6030 6720 10140 Electrical Duplicate - F36 Z 140-440 140-440 200 200 200 200 200 200 200 200 200 200 200 (Routine Test) Electrical Duplicate (Complete Test) F37 Z 140-440 140-440 300 300 300 300 300 300 300 300 300 300 300 Noise F30 Z 140-440 140-440 2800 2800 2800 2800 2800 2800 3600 3600 3600 3600 3600 Noise (Witnessed) F32 Z 140-440 140-440 4400 4400 4400 4400 4400 4400 5200 5200 5200 5200 5200 Routine Test Report F22 Z 140-440 140-440 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 with Vibration Test (Witnessed) Vertical Jacking Vertical Jacking M39 Z 280-440 280-440 - - - - 600 600 600 600 600 600 600 Provision Vibration Detectors Vibraswitch Robert Shaw malfunction detector Model 366 - D8 120VAC A66 Z 280-440 280-440 - - - - 2650 2650 2650 3250 3250 3250 3250 For further details please refer to section 9 S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 4-15 Dimensions

Introduction General Purpose Duty Options Duty (XP ) Description Voltage Special Voltage 200-460V Special Voltage 461-600V Part Winding Start - 200V, 60Hz Part Winding Start - 230V, 60Hz Part Winding Start - 460V, 60Hz Part Winding Start - 575V, 60Hz Wye Start - Delta Run - 200V, 60Hz Wye Start - Delta Run - 230V, 60Hz Wye Start - Delta Run - 460V, 60Hz Wye Start - Delta Run - 575V, 60Hz Order Code Code Pos 9-0 + 12, M1Y 13+Z 9-0 + 12, M2Y 13+Z 20 12 &13 21 12 &13 22 12 &13 23 12 &13 30 12 &13 31 12 &13 32 12 &13 33 12 &13 For further details please refer to section 9 Type / Frame List Price Adder Per Frame ($) RGZZESD RGZZESD 143 182 213 254 284 324 364 404 444 447 1D1 145 184 215 256 286 326 365 405 445 449 140-440 140-440 81 81 81 112 134 323 366 479 796 979 979 140-440 140-440 81 81 81 112 134 323 366 479 796 979 979 280-360 280-360 - - - - 104 126 185 - - - - 280-360 280-360 - - - - 104 126 185 - - - - 280-440 280-440 - - - - 104 126 185 290 482 506 506 280-440 280-440 - - - - 104 126 185 290 482 506 506 280-360 280-360 - - - - 104 126 185 - - - - 280-360 280-360 - - - - 104 126 185 - - - - 280-440 280-440 - - - - 104 126 185 290 482 506 506 280-440 280-440 - - - - 104 126 185 290 482 506 506 S449 Dimensions Duty Purpose 4-16 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty - TEFC RGZESDI - 10:1 Constant Torque RGZESDI inverter duty high efficiency severe duty TEFC motors are designed for inverter or vector applications where up to a 10:1 constant torque speed range is required. These motors are well suited to be used in adjustable speed applications such as mixers, chemical processing, pulp and paper, waste management and petro/chemical. Specifications 1 to 350 HP 1.15 service factor on sine wave power, 40ºC ambient 1.0 service factor on inverter power 3600, 1800, 1200 or 900 RPM 3 phase, 60 Hz, 460 volt; 200, 230 & 575 volt available Meets or exceeds EPAct Efficiency standards Class F insulation, Class B temperature rise Continuous Duty 143T through S449 frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity and corrosion resistance. Condensation T-drains provided. Lifting eyebolts are included for motors > 75 lbs. Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation Proprietary inverter duty Class F non-hygroscopic (corona resistant) insulation system with NEMA Class B temperature rise provides an extra margin of thermal life. All motors are equipped with two series connected, normally closed, Class F thermostats for detection of overload conditions and/or excessive heating. Suitable for operation from adjustable speed drives with an insulation system that meets or exceeds NEMA MG1-2006, Part 31. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized single shielded with cast iron inner caps. Alemite grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance. For added bearing protection, 143T-256T frames have a drive end shaft seal and 284T-S449 frames have a drive end shaft V-ring slinger. Lubrication A specially formulated, high temperature tested, polyurea based grease is used to provide more than four times the lubrication life of other polyurea greases. High Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. A ground lug is provided. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 5-1 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty - TEFC RGZESDI - 10:1 Constant Torque HP RPM Frame Voltage Type DE Bearing 5-2 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 1800 143T 460 RGZESDI Ball 1PC28911AB212AG3 775 SA-7INV 1.5 82.5 45 1 1200 145T 460 RGZESDI Ball 1PC28911AC312AG3 855 SA-7INV 1.8 80 55 1 900 182T 460 RGZESDI Ball 1PC28911CD112AG3 1180 SA-7INV 1.9 78.5 85 1.5 3600 143T 460 RGZESDI Ball 1PC28911AA212AG3 875 SA-7INV 2 82.5 45 1.5 1800 145T 460 RGZESDI Ball 1PC28911AB312AG3 805 SA-7INV 2.2 84 55 1.5 1200 182T 460 RGZESDI Ball 1PC28911CC112AG3 1005 SA-7INV 2.3 85.5 85 1.5 900 184T 460 RGZESDI Ball 1PC28911CD312AG3 1385 SA-7INV 2.6 80 100 2 3600 145T 460 RGZESDI Ball 1PC28911AA312AG3 910 SA-7INV 2.5 84 55 2 1800 145T 460 RGZESDI Ball 1PC28911AB412AG3 840 SA-7INV 2.9 84 62 2 1200 184T 460 RGZESDI Ball 1PC28911CC312AG3 1075 SA-7INV 3 86.5 100 2 900 213T 460 RGZESDI Ball 1PC28912AD112AG3 1540 SA-7INV 3.3 82.5 135 3 3600 182T 460 RGZESDI Ball 1PC28911CA112AG3 1070 SA-7INV 3.6 86.5 85 3 1800 182T 460 RGZESDI Ball 1PC28911CB112AG3 985 SA-7INV 3.9 87.5 85 3 1200 213T 460 RGZESDI Ball 1PC28912AC112AG3 1185 SA-7INV 4 87.5 135 3 900 215T 460 RGZESDI Ball 1PC28912AD212AG3 1850 SA-7INV 4.7 84 162 5 3600 184T 460 RGZESDI Ball 1PC28911CA312AG3 1178 SA-7INV 5.8 87.5 100 5 1800 184T 460 RGZESDI Ball 1PC28911CB312AG3 1085 SA-7INV 6.5 87.5 100 5 1200 215T 460 RGZESDI Ball 1PC28912AC212AG3 1515 SA-7INV 6.8 88.5 160 5 900 256T 460 RGZESDI Ball 1PC28912BD012AG3 2650 SA-7INV 7.5 86.5 300 7.5 3600 213T 460 RGZESDI Ball 1PC28912AA112AG3 1395 SA-7INV 8.8 88.5 151 7.5 1800 213T 460 RGZESDI Ball 1PC28912AB112AG3 1275 SA-7INV 9.5 89.5 157 7.5 1200 256T 460 RGZESDI Ball 1PC28912BC012AG3 2165 SA-7INV 9.8 90.2 300 7.5 900 284T 460 RGZESDI Ball 1PC28912CD712AG3 2990 SA-7INV 12 87.5 336 10 3600 215T 460 RGZESDI Ball 1PC28912AA212AG3 1595 SA-7INV 12 89.5 160 10 1800 215T 460 RGZESDI Ball 1PC28912AB212AG3 1455 SA-7INV 13 89.5 160 10 1200 284T 460 RGZESDI Ball 1PC28912CC712AG3 2785 SA-7INV 13 89.5 380 10 900 286T 460 RGZESDI Ball 1PC28912CD812AG3 3350 SA-7INV 15 91 410 15 3600 256T 460 RGZESDI Ball 1PC28912BA012AG3 2301 SA-7INV 17 90.2 295 15 1800 256T 460 RGZESDI Ball 1PC28912BB012AG3 2215 SA-7INV 19 91.7 295 15 1200 286T 460 RGZESDI Ball 1PC28912CC812AG3 3256 SA-7INV 20 91 450 15 900 324T 460 RGZESDI Ball 1PC28913BD712AG3 4068 SA-7INV 23 91 565 20 3600 284TS 460 RGZESDI Ball 1PC28912DA512AG3 3089 SA-7INV 23 90.2 380 20 1800 284T 460 RGZESDI Ball 1PC28912CB712AG3 2576 SA-7INV 26 91.7 380 20 1200 324T 460 RGZESDI Ball 1PC28913BC712AG3 3966 SA-7INV 26 91.7 565 20 900 326T 460 RGZESDI Ball 1PC28913AD012AG3 4730 SA-7INV 31 91 600 25 3600 286TS 460 RGZESDI Ball 1PC28912DA612AG3 3516 SA-7INV 29 91.7 450 25 1800 286T 460 RGZESDI Ball 1PC28912CB812AG3 3175 SA-7INV 29 93 450 25 1200 326T 460 RGZESDI Ball 1PC28913AC012AG3 4465 SA-7INV 33 92.4 600 25 900 364T 460 RGZESDI Ball 1PC28913DD712AG3 5598 SA-7INV 38 90.2 830 30 3600 324TS 460 RGZESDI Ball 1PC28913BA512AG3 4120 SA-7INV 34 91.7 565 30 1800 324T 460 RGZESDI Ball 1PC28913BB712AG3 3590 SA-7INV 35 93 565 30 1200 364T 460 RGZESDI Ball 1PC28913DC712AG3 5785 SA-7INV 39 92.4 830 30 900 365T 460 RGZESDI Ball 1PC28913CD012AG3 6769 SA-7INV 47 91 850 40 3600 326TS 460 RGZESDI Ball 1PC28913BA612AG3 4762 SA-7INV 45 93.6 600 40 1800 326T 460 RGZESDI Ball 1PC28913AB012AG3 4360 SA-7INV 47 93.6 600 40 1200 365T 460 RGZESDI Ball 1PC28913CC012AG3 6522 SA-7INV 52 93.6 850 40 900 404T 460 RGZESDI Ball 1PC28914AD712AG3 9239 SA-7INV 63 91.7 1000 Stock Model

Duty - TEFC RGZESDI - 10:1 Constant Torque HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) 50 3600 364TS 460 RGZESDI Ball 1PC28913DA512AG3 6480 SA-7INV 55 93.6 830 50 1800 364T 460 RGZESDI Ball 1PC28913DB712AG3 5929 SA-7INV 58 93.6 830 50 1200 404T 460 RGZESDI Ball 1PC28914AC712AG3 8366 SA-7INV 66 93.6 1100 50 900 405T 460 RGZESDI Ball 1PC28914BD612AG3 12175 SA-7INV 67 91.7 1250 60 3600 365TS 460 RGZESDI Ball 1PC28913DA612AG3 7985 SA-7INV 68 93.6 850 60 1800 365T 460 RGZESDI Ball 1PC28913CB012AG3 7295 SA-7INV 71 93.6 850 60 1200 405T 460 RGZESDI Ball 1PC28914BC612AG3 9746 SA-7INV 74 94.1 1250 60 900 444TS 460 RGZESDI Ball 1PC28914PD112AG3 13650 SA-7INV 78 91.7 1620 75 3600 405TS 460 RGZESDI Ball 1PC28914BA512AG3 10889 SA-7INV 85 94.1 1250 75 1800 405T 460 RGZESDI Ball 1PC28914BB612AG3 9097 SA-7INV 87 94.1 1250 75 1200 444TS 460 RGZESDI Ball 1PC28914PC112AG3 12042 SA-7INV 93 94.5 1620 75 900 445TS 460 RGZESDI Ball 1PC28914PD212AG3 16363 SA-7INV 94 93 1740 100 3600 444TS 460 RGZESDI Ball 1PC28914PA112AG3 12924 SA-7INV 108 94.1 1620 100 1800 444TS 460 RGZESDI Ball 1PC28914PB112AG3 11827 SA-7INV 113 94.5 1620 100 1200 445TS 460 RGZESDI Ball 1PC28914PC212AG3 14500 SA-7INV 117 94.5 1740 100 900 447TS 460 RGZESDI Ball 1PC28914PD312AG3 16291 SA-7INV 123 94.1 2000 125 3600 445TS 460 RGZESDI Ball 1PC28914PA212AG3 13544 SA-7INV 138 94.5 2740 125 1800 445TS 460 RGZESDI Ball 1PC28914PB212AG3 13544 SA-7INV 143 95 1740 125 1200 447TS 460 RGZESDI Ball 1PC28914PC312AG3 16073 SA-7INV 144 94.5 2000 125 900 447TS 460 RGZESDI Ball 1PC28914DD812AG3 21710 SA-7INV 152 93.6 2000 150 3600 447TS 460 RGZESDI Ball 1PC28914PA312AG3 18580 SA-7INV 164 95 1740 150 1800 447TS 460 RGZESDI Ball 1PC28914PB312AG3 16198 SA-7INV 170 95.8 2000 150 1200 449TS 460 RGZESDI Ball 1PC28914PC412AG3 19390 SA-7INV 170 95 2300 150 900 449TS 460 RGZESDI Ball 1PC28914PD512AG3 21210 SA-7INV 186 94.1 2300 200 3600 449TS 460 RGZESDI Ball 1PC28914PA412AG3 22958 SA-7INV 223 95 2300 200 1800 449TS 460 RGZESDI Ball 1PC28914PB412AG3 20000 SA-7INV 239 95.8 2300 200 1200 449TS 460 RGZESDI Ball 1PC28914PC512AG3 22099 SA-7INV 238 95 2300 250 3600 449TS 460 RGZESDI Ball 1PC28914PA512AG3 28189 SA-7INV 282 95.4 2300 250 1800 449TS 460 RGZESDI Ball 1PC28914PB512AG3 22673 SA-7INV 302 95.8 2300 250 1200 S449SS 460 RGZESDI Ball 1PC28914GC212AG3 37512 SA-7INV 296 95 3050 300 3600 S449SS 460 RGZESDI Ball 1PC28914GA212AG3 34872 SA-7INV 333 95.8 3063 300 1800 S449SS 460 RGZESDI Ball 1PC28914GB112AG3 32422 SA-7INV 356 95.4 3050 350 3600 S449SS 460 RGZESDI Ball 1PC28914GA112AG3 38915 SA-7INV 392 95.4 3050 350 1800 S449SS 460 RGZESDI Ball 1PC28914GB212AG3 36175 SA-7INV 406 95.8 3050 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V Weight (lbs) Stock Model Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 5-3 Dimensions

Introduction General Purpose Duty Duty Duty - TEFC & TEBC RGKESDI & RGZESDI - 1000:1 Constant Torque RGZESDI inverter duty high efficiency severe duty TEFC & TEBC (blower cooled) motors are designed for inverter or vector applications where up to a 1000:1 constant torque speed range is required. These motors are well suited to be used in adjustable speed applications such as mixers, chemical processing, pulp and paper and petro/chemical. Specifications 1 to 400 HP 1.15 service factor on sine wave power, 40ºC ambient 1.0 service factor on inverter power 3600, 1800, 1200 or 900 RPM 3 phase, 60 Hz, 460 volt; 200, 230 & 575 volt available Meets or exceeds EPAct Efficiency standards Class F insulation, Class B temperature rise Continuous Duty 143T through S449 frame Features for Long Life Frame & Bearing Housings Cast iron construction for exceptional structural integrity and corrosion protection. Condensation T-drains provided. Lifting eyebolts are included for motors > 75 lbs. Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation Proprietary inverterduty Class F non-hygroscopic (corona resistant) insulation system with NEMA Class B temperature rise provides an extra margin of thermal life. All motors are equipped with two series connected, normally closed, Class F thermostats for detection of overload conditions and/or excessive heating. Suitable for operation from adjustable speed drives with an insulation system that meets or exceeds NEMA MG1-2006, Part 31. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized single shielded with cast iron inner caps. Alemite grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance. For added bearing protection, 143T-256T frames have a drive end shaft seal and 284T-S449 frames have a drive end shaft V-ring slinger. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene gasketed and rotatable in 90º increments for quick and easy connections. A ground lug is provided. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Dimensions Purpose 5-4 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty - TEFC & TEBC RGKESDI & RGZESDI - 1000:1 Constant Torque HP RPM Frame Voltage Type DE Bearing Enclosure List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 1 1800 145T 460 RGKESDI Ball TEFC 1PC29111AB512AG3 805 SA-7INV 1.4 82.5 55 1 1200 182T 460 RGKESDI Ball TEFC 1PC29111CC612AG3 1005 SA-7INV 1.8 80 85 1.5 3600 182T 460 RGKESDI Ball TEFC 1PC29111CA612AG3 1070 SA-7INV 2 82.5 85 1.5 1800 182T 460 RGKESDI Ball TEFC 1PC29111CB612AG3 895 SA-7INV 2.2 84 85 1.5 1200 184T 460 RGKESDI Ball TEFC 1PC29111CC712AG3 1075 SA-7INV 2.4 85.5 100 2 3600 184T 460 RGKESDI Ball TEFC 1PC29111CA812AG3 1178 SA-7INV 2.5 84 100 2 1800 182T 460 RGKESDI Ball TEFC 1PC29111CB512AG3 985 SA-7INV 2.7 84 85 2 1200 213T 460 RGKESDI Ball TEFC 1PC29112KC512AG3 1205 SA-7INV 3.2 86.5 130 3 3600 213T 460 RGKESDI Ball TEFC 1PC29112KA112AG3 1395 SA-7INV 3.7 86.5 130 3 1800 184T 460 RGKESDI Ball TEFC 1PC29111CB712AG3 1085 SA-7INV 4.2 87.5 100 3 1200 215T 460 RGKESDI Ball TEFC 1PC29112AC012AG3 1515 SA-7INV 4.3 87.5 162 5 3600 215T 460 RGKESDI Ball TEFC 1PC29112KA212AG3 1595 SA-7INV 5.8 87.5 162 5 1800 213T 460 RGKESDI Ball TEFC 1PC29112KB512AG3 1275 SA-7INV 6.5 87.5 157 5 1200 254T 460 RGKESDI Ball TEFC 1PC29112KC612AG3 1775 SA-7INV 7.1 88.5 250 5 900 254T 460 RGZESDI Ball TEBC 1PC29212BD112AG3 3817 SA-7INV 7.5 86.5 330 7.5 3600 254T 460 RGKESDI Ball TEFC 1PC29112KA312AG3 1840 SA-7INV 8.7 88.5 250 7.5 1800 254T 460 RGKESDI Ball TEFC 1PC29112BB712AG3 1740 SA-7INV 9.5 89.5 245 7.5 1200 256T 460 RGKESDI Ball TEFC 1PC29112BC012AG3 2112 SA-7INV 10 90.2 300 7.5 900 256T 460 RGZESDI Ball TEBC 1PC29212BD212AG3 4140 SA-7INV 12 87.5 375 10 3600 256T 460 RGKESDI Ball TEFC 1PC29112KA412AG3 2191 SA-7INV 12.5 89.5 300 10 1800 256T 460 RGKESDI Ball TEFC 1PC29112BB812AG3 2105 SA-7INV 12.5 89.5 285 10 1200 256T 460 RGZESDI Ball TEBC 1PC29212BC212AG3 3405 SA-7INV 13 90.2 330 10 900 284T 460 RGZESDI Ball TEBC 1PC29212CD112AG3 4590 SA-7INV 15 91 460 15 3600 254T 460 RGZESDI Ball TEBC 1PC29212BA112AG3 2972 SA-7INV 18 90.2 330 15 1800 254T 460 RGZESDI Ball TEBC 1PC29212BB112AG3 2154 SA-7INV 20 91.7 330 15 1200 284T 460 RGZESDI Ball TEBC 1PC29212CC112AG3 4285 SA-7INV 20 91 460 15 900 286T 460 RGZESDI Ball TEBC 1PC29212CD212AG3 4840 SA-7INV 23 91 530 20 3600 256T 460 RGZESDI Ball TEBC 1PC29212BA212AG3 3265 SA-7INV 23 90.2 375 20 1800 256T 460 RGZESDI Ball TEBC 1PC29212BB212AG3 2557 SA-7INV 27 91.7 375 20 1200 286T 460 RGZESDI Ball TEBC 1PC29212CC212AG3 4319 SA-7INV 26 91.7 530 20 900 324T 460 RGZESDI Ball TEBC 1PC29213AD112AG3 5558 SA-7INV 31 91 645 25 3600 284TS 460 RGZESDI Ball TEBC 1PC29212DA112AG3 3816 SA-7INV 29 91.7 4600 25 1800 284T 460 RGZESDI Ball TEBC 1PC29212CB112AG3 3561 SA-7INV 29 93 460 25 1200 324T 460 RGZESDI Ball TEBC 1PC29213AC112AG3 5460 SA-7INV 33 92.4 645 25 900 326T 460 RGZESDI Ball TEBC 1PC29213AD212AG3 6220 SA-7INV 38 90.2 680 30 3600 286TS 460 RGZESDI Ball TEBC 1PC29212DA212AG3 4217 SA-7INV 34 91.7 680 30 1800 286T 460 RGZESDI Ball TEBC 1PC29212CB212AG3 3926 SA-7INV 35 93 680 30 1200 326T 460 RGZESDI Ball TEBC 1PC29213AC212AG3 6444 SA-7INV 39 92.4 680 30 900 364T 460 RGZESDI Ball TEBC 1PC29213CD112AG3 7088 SA-7INV 47 91 910 40 3600 324TS 460 RGZESDI Ball TEBC 1PC29213BA112AG3 5341 SA-7INV 46 93.6 645 40 1800 324T 460 RGZESDI Ball TEBC 1PC29213AB112AG3 4964 SA-7INV 47 93.6 645 40 1200 364T 460 RGZESDI Ball TEBC 1PC29213CC112AG3 8294 SA-7INV 52 93.6 910 40 900 365T 460 RGZESDI Ball TEBC 1PC29213CD212AG3 9578 SA-7INV 63 91.7 930 50 3600 326TS 460 RGZESDI Ball TEBC 1PC29213BA212AG3 6325 SA-7INV 55 93.6 680 50 1800 326T 460 RGZESDI Ball TEBC 1PC29213AB212AG3 5858 SA-7INV 58 93.6 680 50 1200 365T 460 RGZESDI Ball TEBC 1PC29213CC212AG3 9942 SA-7INV 66 93.6 930 50 900 404T 460 RGZESDI Ball TEBC 1PC29214AD112AG3 10729 SA-7INV 67 91.7 1180 60 3600 364TS 460 RGZESDI Ball TEBC 1PC29213DA112AG3 8141 SA-7INV 68 93.6 910 60 1800 364T 460 RGZESDI Ball TEBC 1PC29213CB112AG3 7540 SA-7INV 71 93.6 910 60 1200 404T 460 RGZESDI Ball TEBC 1PC29214AC112AG3 11029 SA-7INV 72 94.1 1180 60 900 405T 460 RGZESDI Ball TEBC 1PC29214AD212AG3 13655 SA-7INV 78 91.7 1330 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 5-5 Introduction General Purpose Duty Duty Purpose Dimensions

Duty - TEFC & TEBC RGKESDI & RGZESDI - 1000:1 Constant Torque Introduction HP RPM Frame Voltage Type DE Bearing Enclosure List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) 75 3600 365TS 460 RGZESDI Ball TEBC 1PC29213DA212AG3 9789 SA-7INV 85 94.1 930 75 1800 365T 460 RGZESDI Ball TEBC 1PC29213CB212AG3 9038 SA-7INV 87 94.1 930 75 1200 405T 460 RGZESDI Ball TEBC 1PC29214AC212AG3 12155 SA-7INV 87 94.5 1330 75 900 444TS 460 RGZESDI Ball TEBC 1PC29214DD112AG3 15140 SA-7INV 94 93 1700 100 3600 405TS 460 RGZESDI Ball TEBC 1PC29214BA212AG3 11936 SA-7INV 110 94.1 1330 100 1800 405T 460 RGZESDI Ball TEBC 1PC29214AB212AG3 11014 SA-7INV 113 94.5 1330 100 1200 444TS 460 RGZESDI Ball TEBC 1PC29214DC112AG3 15279 SA-7INV 115 94.5 1700 100 900 445TS 460 RGZESDI Ball TEBC 1PC29214DD212AG3 16573 SA-7INV 123 94.1 1820 125 3600 444TS 460 RGZESDI Ball TEBC 1PC29214DA112AG3 15089 SA-7INV 136 94.5 1700 125 1800 444TS 460 RGZESDI Ball TEBC 1PC29214DB112AG3 13890 SA-7INV 143 95 1700 125 1200 445TS 460 RGZESDI Ball TEBC 1PC29214DC212AG3 17342 SA-7INV 144 94.5 1820 125 900 447TS 460 RGZESDI Ball TEBC 1PC29214DD312AG3 19777 SA-7INV 152 93.6 2080 150 3600 445TS 460 RGZESDI Ball TEBC 1PC29214DA212AG3 17152 SA-7INV 160 95 1820 150 1800 445TS 460 RGZESDI Ball TEBC 1PC29214DB212AG3 15765 SA-7INV 169 95.8 1820 150 1200 447TS 460 RGZESDI Ball TEBC 1PC29214DC312AG3 20533 SA-7INV 169 95 2080 150 900 447TS 460 RGZESDI Ball TEBC 1PC29214DD412AG3 20888 SA-7INV 186 94.1 2080 200 3600 447TS 460 RGZESDI Ball TEBC 1PC29214DA312AG3 20940 SA-7INV 208 95 2080 200 1800 447TS 460 RGZESDI Ball TEBC 1PC29214DB312AG3 18666 SA-7INV 223 95.8 2080 200 1200 449TS 460 RGZESDI Ball TEBC 1PC29214DC512AG3 28971 SA-7INV 222 95 2380 200 900 449TS 460 RGZESDI Ball TEBC 1PC29214DD612AG3 29444 SA-7INV 241 94.5 2380 250 3600 449TS 460 RGZESDI Ball TEBC 1PC29214DA512AG3 25509 SA-7INV 264 95.4 2380 250 1800 449TS 460 RGZESDI Ball TEBC 1PC29214DB512AG3 23417 SA-7INV 282 95.8 2380 250 1200 449TS 460 RGZESDI Ball TEBC 1PC29214DC612AG3 31721 SA-7INV 285 95 2380 250 900 S449SS 460 RGZESDI Ball TEBC 1PC29214GD212AG3 42555 SA-7INV 303 94.5 4130 300 3600 449TS 460 RGZESDI Ball TEBC 1PC29214DA612AG3 33369 SA-7INV 330 95.8 2380 300 1800 449TS 460 RGZESDI Ball TEBC 1PC29214DB612AG3 26337 SA-7INV 345 95.4 2380 300 1200 S449SS 460 RGZESDI Ball TEBC 1PC29214GC112AG3 40542 SA-7INV 335 95 4130 350 3600 S449SS 460 RGZESDI Ball TEBC 1PC29214GA112AG3 37910 SA-7INV 370 95.4 4130 350 1800 S449SS 460 RGZESDI Ball TEBC 1PC29214GB212AG3 33732 SA-7INV 390 95.8 4130 350 1200 S449SS 460 RGZESDI Ball TEBC 1PC29214GC312AG3 45482 SA-7INV 396 95 4130 400 3600 S449SS 460 RGZESDI Ball TEBC 1PC29214GA312AG3 41945 SA-7INV 420 95.4 4130 400 1800 S449SS 460 RGZESDI Ball TEBC 1PC29214GB312AG3 39205 SA-7INV 450 95.8 4130 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V Weight (lbs) Stock Model Dimensions General Purpose Duty Duty Purpose 5-6 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty - TEFC RGZZESDI - Class I, Group D, Class II, Groups F & G, Division 1 RGZZESDI high efficiency explosionproof motors are UL listed for dust ignition proof environments, and are suitable for use in Class I, Group D, Class II, Groups F & G, Division 1 hazardous areas. They are ideal for use in applications such as chemical processing, pulp and paper, waste management, and petro/chemical. Specifications 1 to 200 HP 1.0 service factor, 40ºC ambient T3B temperature code 3600, 1800, 1200, or 900 RPM 3 phase, 60 Hz; 230 or 460 volt operation under 25 HP 460 volt 25 HP and above; 200 & 575 volt available Class F insulation, Class B temperature rise NEMA design B, continuous duty 143T through 449T frame Features for Long Life Frame & Bearing Housings Cast iron frame and end shields for exceptional structural integrity and corrosion resistance. Sintered condensation / breather drains on 404T 449T frames. Lifting eyebolts are included for motors > 75 lbs. Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation Proprietary Class F non-hygroscopic insulation system with NEMA Class B temperature rise provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. Two seriesconnected normally closed Class B thermostats are supplied as standard. Suitable for operation from adjustable speed drives with an insulation system that meets or exceeds NEMA MG1-2006, Part 31. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, oversized single shielded bearings with cast iron inner caps. Alemite grease fittings on the inlets, and pipe plugs on the relief ports for ease of routine maintenance. Frames 143T 256T are equipped with a shaft seal on the drive end; 284T 449T frames have a drive end V-ring slinger for added bearing life. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split and rotatable in 90º increments for quick and easy connections. A ground lug is provided. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 5-7 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty - TEFC RGZZESDI - Class I, Group D, Class II, Groups F & G, Division 1 HP RPM Frame Voltage Type DE Bearing 5-8 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) 1 3600 143T 460 RGZZESDI Ball 1PC29311AA112AG3 672 SA-7XXP 1.5 82.5 65 1 1800 145T 460 RGZZESDI Ball 1PC29311AB512AG3 687 SA-7XXP 1.7 83.6 70 1 1200 182T 460 RGZZESDI Ball 1PC29311CC612AG3 795 SA-7XXP 1.7 85.5 125 1 900 184T 460 RGZZESDI Ball 1PC29311CD712AG3 1523 SA-7XXP 1.9 78.5 130 1.5 3600 145T 460 RGZZESDI Ball 1PC29311AA512AG3 750 SA-7XXP 1.9 84 70 1.5 1800 145T 460 RGZZESDI Ball 1PC29311AB312AG3 728 SA-7XXP 2.5 84 70 1.5 1200 184T 460 RGZZESDI Ball 1PC29311CC712AG3 884 SA-7XXP 2.6 86.2 130 1.5 900 213T 460 RGZZESDI Ball 1PC29312KD512AG3 1744 SA-7XXP 2.8 80 170 2 3600 182T 460 RGZZESDI Ball 1PC29311CA512AG3 810 SA-7XXP 2.6 86.5 100 2 1800 182T 460 RGZZESDI Ball 1PC29311CB512AG3 807 SA-7XXP 3 87.5 100 2 1200 213T 460 RGZZESDI Ball 1PC29312KC512AG3 1055 SA-7XXP 2.8 88.5 170 2 900 215T 460 RGZZESDI Ball 1PC29312AD012AG3 2075 SA-7XXP 3.5 82.5 180 3 3600 184T 460 RGZZESDI Ball 1PC29311CA712AG3 966 SA-7XXP 3.6 87.5 115 3 1800 184T 460 RGZZESDI Ball 1PC29311CB712AG3 891 SA-7XXP 4.6 87.5 115 3 1200 215T 460 RGZZESDI Ball 1PC29312AC012AG3 1342 SA-7XXP 4.4 89.5 180 3 900 254T 460 RGZZESDI Ball 1PC29312KD612AG3 2161 SA-7XXP 5.5 84 290 5 3600 213T 460 RGZZESDI Ball 1PC29312KA512AG3 1146 SA-7XXP 6.2 88.5 160 5 1800 213T 460 RGZZESDI Ball 1PC29312KB512AG3 1141 SA-7XXP 7.3 89.5 160 5 1200 254T 460 RGZZESDI Ball 1PC29312KC612AG3 1711 SA-7XXP 7 90.2 290 5 900 256T 460 RGZZESDI Ball 1PC29312BD012AG3 2625 SA-7XXP 9 86.5 360 7.5 3600 215T 460 RGZZESDI Ball 1PC29312AA012AG3 1281 SA-7XXP 9.2 89.5 180 7.5 1800 215T 460 RGZZESDI Ball 1PC29312AB012AG3 1304 SA-7XXP 10.7 89.5 180 7.5 1200 256T 460 RGZZESDI Ball 1PC29312BC012AG3 2003 SA-7XXP 10 90.2 360 7.5 900 284T 460 RGZZESDI Ball 1PC29312CD712AG3 3151 SA-7XXP 12 87.5 450 10 3600 254T 460 RGZZESDI Ball 1PC29312KA612AG3 1671 SA-7XXP 11.8 90.2 265 10 1800 254T 460 RGZZESDI Ball 1PC29312KB612AG3 1648 SA-7XXP 13.7 91.7 265 10 1200 284T 460 RGZZESDI Ball 1PC29312CC712AG3 2681 SA-7XXP 14.5 91 450 10 900 286T 460 RGZZESDI Ball 1PC29312CD812AG3 3937 SA-7XXP 17 91 525 15 3600 256T 460 RGZZESDI Ball 1PC29312BA012AG3 1976 SA-7XXP 17.6 90.2 325 15 1800 256T 460 RGZZESDI Ball 1PC29312BB012AG3 1957 SA-7XXP 20 91.7 325 15 1200 286T 460 RGZZESDI Ball 1PC29312CC812AG3 3148 SA-7XXP 20 91.7 525 15 900 324T 460 RGZZESDI Ball 1PC29313BD712AG3 4892 SA-7XXP 25 91 660 20 3600 284TS 460 RGZZESDI Ball 1PC29312DA512AG3 2495 SA-7XXP 23.4 91.7 410 20 1800 284T 460 RGZZESDI Ball 1PC29312CB712AG3 2407 SA-7XXP 24 93 410 20 1200 324T 460 RGZZESDI Ball 1PC29313BC712AG3 3900 SA-7XXP 28 92.4 660 20 900 326T 460 RGZZESDI Ball 1PC29313AD012AG3 5567 SA-7XXP 33 91 690 25 3600 286TS 460 RGZZESDI Ball 1PC29312DA612AG3 2822 SA-7XXP 28.5 91.7 460 25 1800 286T 460 RGZZESDI Ball 1PC29312CB812AG3 2710 SA-7XXP 30 93 460 25 1200 326T 460 RGZZESDI Ball 1PC29313AC012AG3 4380 SA-7XXP 33 92.4 690 25 900 364T 460 RGZZESDI Ball 1PC29313DD712AG3 6616 SA-7XXP 41 91 900 30 3600 324TS 460 RGZZESDI Ball 1PC29313BA512AG3 3750 SA-7XXP 35.3 93.6 589 30 1800 324T 460 RGZZESDI Ball 1PC29313BB712AG3 3622 SA-7XXP 34 93.6 589 30 1200 364T 460 RGZZESDI Ball 1PC29313DC712AG3 5924 SA-7XXP 41 93.6 900 30 900 365T 460 RGZZESDI Ball 1PC29313CD012AG3 7810 SA-7XXP 52 91 915 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V Weight (lbs)

Duty - TEFC RGZZESDI - Class I, Group D, Class II, Groups F & G, Division 1 HP RPM Frame Voltage Type DE Bearing List Price $ Mult. Sym. FL Amps* High Efficiency FL Nom. Eff. (%) 40 3600 326TS 460 RGZZESDI Ball 1PC29313BA612AG3 4633 SA-7XXP 44.5 93.6 645 40 1800 326T 460 RGZZESDI Ball 1PC29313AB012AG3 4279 SA-7XXP 48 93.6 645 40 1200 365T 460 RGZZESDI Ball 1PC29313CC012AG3 6654 SA-7XXP 55 93.6 915 40 900 404T 460 RGZZESDI Ball 1PC29314AD712AG3 9452 SA-7XXP 53 91.7 1290 50 3600 364TS 460 RGZZESDI Ball 1PC29313DA512AG3 6023 SA-7XXP 57 93.6 865 50 1800 364T 460 RGZZESDI Ball 1PC29313DB712AG3 5979 SA-7XXP 60 93.6 865 50 1200 404T 460 RGZZESDI Ball 1PC29314AC712AG3 7939 SA-7XXP 61 94.1 1290 50 900 405T 460 RGZZESDI Ball 1PC29314BD612AG3 10626 SA-7XXP 66 91.7 1420 60 3600 365TS 460 RGZZESDI Ball 1PC29313DA612AG3 7332 SA-7XXP 69 94.1 915 60 1800 365T 460 RGZZESDI Ball 1PC29313CB012AG3 7337 SA-7XXP 71 94.1 915 60 1200 405T 460 RGZZESDI Ball 1PC29314BC612AG3 9115 SA-7XXP 74 94.5 1420 60 900 444TS 460 RGZZESDI Ball 1PC29314PD112AG3 13949 SA-7XXP 77 91.7 1740 75 3600 405TS 460 RGZZESDI Ball 1PC29314BA512AG3 9813 SA-7XXP 81 94.1 1335 75 1800 405T 460 RGZZESDI Ball 1PC29314BB612AG3 9148 SA-7XXP 86 94.5 1335 75 1200 444TS 460 RGZZESDI Ball 1PC29314PC112AG3 12201 SA-7XXP 88 94.5 1740 75 900 445TS 460 RGZZESDI Ball 1PC29314PD212AG3 16884 SA-7XXP 95 93 1930 100 3600 444TS 460 RGZZESDI Ball 1PC29314PA112AG3 12786 SA-7XXP 111 94.5 1740 100 1800 444TS 460 RGZZESDI Ball 1PC29314PB112AG3 11990 SA-7XXP 118 95 1740 100 1200 445TS 460 RGZZESDI Ball 1PC29314PC212AG3 14726 SA-7XXP 118 94.5 1930 100 900 447TS 460 RGZZESDI Ball 1PC29314PD312AG3 18168 SA-7XXP 124 94.1 2415 125 3600 445TS 460 RGZZESDI Ball 1PC29314PA212AG3 15052 SA-7XXP 137 95 1930 125 1800 445TS 460 RGZZESDI Ball 1PC29314PB212AG3 13690 SA-7XXP 143 95.8 1930 125 1200 447TS 460 RGZZESDI Ball 1PC29314PC312AG3 16283 SA-7XXP 142 95 2415 125 900 449TS 460 RGZZESDI Ball 1PC29314PD412AG3 22615 SA-7XXP 159 93.6 2625 150 3600 447TS 460 RGZZESDI Ball 1PC29314PA312AG3 18913 SA-7XXP 159 95 2415 150 1800 447TS 460 RGZZESDI Ball 1PC29314PB312AG3 16598 SA-7XXP 171 95.8 2415 150 1200 449TS 460 RGZZESDI Ball 1PC29314PC412AG3 19117 SA-7XXP 170 95 2625 200 3600 449TS 460 RGZZESDI Ball 1PC29314PA412AG3 22493 SA-7XXP 213 95.4 2625 200 1800 449TS 460 RGZZESDI Ball 1PC29314PB412AG3 19401 SA-7XXP 223 95.8 2625 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V Weight (lbs) Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 5-9 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty (Variable Speed ) Description Type / Frame List Price Adder Per Frame ($) Order 143 182 213 254 284 324 364 404 444 447 RGZESDI RGZZESDI S449 Code Code 145 184 215 256 286 326 365 405 445 449 Pos Altitude / Ambient Rerate/Derate Y80 Z 140-S449 140-440 110 110 110 110 110 110 110 110 110 110 110 Assembly - Mounting & Terminal Box Position W-2 9+R2A 16+Z 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 W-3 9+R3A 16+Z 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 W-8 7 16 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 C-2 1 16 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 Bearings Sealed Ball bearings 1 L68 Z 140-S449 140-440 160 160 160 320 320 320 400 640 640 640 800 (except 2 pole, 360+ frames) Breathers and Drain Plugs T Drain SS L45 Z 140-S449-110 110 110 160 160 160 210 210 210 210 210 Crouse Hinds - UL Approved L46 Z 280-S449 280-440 - - - - 240 240 240 240 240 240 240 Conduit Box - Main Orient 90 deg CCW J84 Z 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 Orient 180 deg CCW J85 Z 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 Orient 270 deg CCW J86 Z 140-S449 140-440 90 90 90 90 90 90 90 90 90 90 90 Conduit Box - Auxiliary for Thermostats Condulet to Main Box J12 Z 140-S449-165 165 165 165 165 165 165 165 165 165 165 Conduit Box - Auxiliary for Space Heaters Condulet to Main Box J52 Z 140-S449-165 165 165 165 165 165 165 165 165 165 165 Drip Cover Drip cover without vertical lifting K33 Z 140-S449 140-440 106 106 106 114 114 204 414 580 1072 1072 1072 devices Export Packaging Sea Freight - Siemens Standard B09 Z 140-S449 140-440 225 225 225 225 510 760 760 1010 1010 1010 1010 Flanged End Shields C-Face with Feet 2 E 14 140-440 140-440 143 173 197 435 602 651 703 872 1033 1033 - C-Face without Feet G 14 140-250 140-250 157 196 220 470 - - - - - - - D-Flange with Feet F 14 140-250 - 196 249 273 534 - - - - - - - Grounding Provision (tapped hole on frame w/ L27 Z 140-S449 140-440 95 95 95 110 110 125 125 125 175 175 175 bolt) Hardware Stainless Steel L22 Z 140-S449-134 134 134 134 134 165 203 250 308 379 425 Lifting Eyebolt 3 L20 Z 140 140 30 std std std std std std std std std std Insulation Fungus Protection C07 Z 140-S449 140-440 142 142 142 208 208 208 208 360 360 360 360 Leads / Terminal Blocks Burndy Hydent type YA K80 Z 140-S449 140-440 115 115 115 115 115 115 115 115 115 115 115 Sealed Leads K89 Z 140-S449 Standard 150 150 150 150 150 150 200 200 200 200 200 Lubrication Grease Fitting / Pressure Relief L60 Z 140-S449 140-440 125 125 125 125 125 125 125 125 125 125 125 Nameplate Extra M21 Z 140-S449 140-440 110 110 110 110 110 110 110 110 110 110 110 Division 2 4 M22 Z 140-S449-205 205 205 205 205 205 205 205 205 205 205 Change (Rerate/Derate) Y80 Z 140-S449 140-440 110 110 110 110 110 110 110 110 110 110 110 Auxiliary Y82 Z 140-S449 140-440 110 110 110 110 110 110 110 110 110 110 110 Protective Devices - Windings Thermostats, normally closed, 2 per motor G 15 140-S449 Standard 150 150 150 150 150 200 200 300 300 370 370 For further details please refer to section 8 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings. 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. 5-10 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty (Variable Speed ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 RGZESDI RGZZESDI 145 184 215 256 286 326 365 405 445 449 Rotation Arrow Bidirectional (not applicable for unidirectional K70 Z 140-S449 140-440 95 95 95 95 95 95 95 95 95 95 95 motors) Clockwise (facing ODE) K71 Z 140-S449 140-440 95 95 95 95 95 95 95 95 95 95 95 Counterclockwise (facing ODE) K72 Z 140-S449 140-440 95 95 95 95 95 95 95 95 95 95 95 Service Factor Rerate/Derate Y80 Z 140-S449 140-440 110 110 110 110 110 110 110 110 110 110 110 Shaft Seal Slinger & O Ring (4, 6, 8 Pole only) L76 Z 140-S449 140-440 60 60 60 85 85 115 115 145 145 145 145 Software Documentation in Spanish D05 Z 140-S449 140-440 0 0 0 0 0 0 0 0 0 0 0 Certificate of Compliance F00 Z 140-S449 140-440 200 200 200 200 200 200 200 200 200 200 200 Standard Transmittal F40 Z 140-S449 140-440 30 30 30 30 30 30 30 30 30 30 30 Standard Dimension Sheet F42 Z 140-S449 140-440 30 30 30 30 30 30 30 30 30 30 30 Conduit Box Dimension Sheet F44 Z 140-S449 140-440 30 30 30 30 30 30 30 30 30 30 30 Wiring Diagram F45 Z 140-S449 140-440 30 30 30 30 30 30 30 30 30 30 30 IOM F46 Z 140-S449 140-440 30 30 30 30 30 30 30 30 30 30 30 Renewal Parts F47 Z 140-S449 140-440 30 30 30 30 30 30 30 30 30 30 30 Sheets F49 Z 140-S449 140-440 175 175 175 175 175 175 175 175 175 175 175 F03 Z 140-S449 140-440 500 500 500 500 500 500 500 500 500 500 500 Testing Routine Test Report F10 Z 140-S449 140-440 200 200 200 200 200 200 200 200 200 200 200 Routine Test Report with Vibration Test F20 Z 140-S449 140-440 400 400 400 400 400 400 400 400 400 400 400 For further details please refer to section 8 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings. 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 5-11 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Options Duty Description Type / Frame List Price Adder Per Frame ($) Order 143 182 213 254 284 324 364 404 444 447 RGZESDI RGZZESDI S449 Code Code 145 184 215 256 286 326 365 405 445 449 Pos Assembly - Mounting & Terminal Box Position W-6 4 16 440-S449 140-440 - - - - - - - 140 140 140 140 W-7 5 16 440-S449 140-440 - - - - - - - 200 200 200 - F-2 2 16-140-440 200 200 200 200 200 200 200 200 200 200 - Auxiliary boxes 1 Auxiliary conduit box location (Digit 2) XP condulet - opposite of main conduit box side J 6 Z - 280-440 - - - - 400 400 400 400 400 400 400 Temperature detector device (Digit 1) Select the number that corresponds with the appropriate Temperature Detector Device to create your initial 3 digital ordering code. Thermostats 1 Space heaters 5 Balance Precision M69 Z 140-S449 140-440 - 128 128 147 147 167 167 211 211 404 404 Extra Precision M70 Z 140-S449 140-440 - 216 216 228 228 260 260 350 350 450 450 Bearings Roller Instead of Ball L65 Z 280-400 280-400 - - - - 825 825 825 825 std std std Insulated L66 Z 140-S449-765 765 1050 1315 1665 1975 2350 5100 7850 7850 7850 Insulated - ODE only L67 Z 140-S449-385 385 525 660 835 990 1175 2550 3925 3925 5530 Couplings er Supplied H10 Z 140-440 140-440 325 325 325 325 325 325 480 480 480 480 480 Encoder - Single Output - TEFC Avtron M3 1024 PPR G00 Z 140-360 - 1741 1741 1741 1741 1741 1741 1741 - - - - Avtron M4 1024 PPR G01 Z 400-S449 - - - - - - - - 2346 2346 2346 2346 Avtron M56 1024 PPR G02 Z 140-180 - 1298 1298 - - - - - - - - - Avtron M85 1024 PPR G03 Z 210-S449 - - - 1529 1529 1529 1529 1529 2574 2574 2574 2574 BEI HS35 1024 PPR G04 Z 140-S449-1246 1246 1246 1246 1246 1246 1246 1246 1246 1246 1246 Dynapar HS35 1024 PPR G05 Z 140-S449-900 900 900 900 900 900 900 900 900 900 900 Northstar 8500 1024 PPR (210-360) G06 Z 210-360 - - - 4380 4380 4380 4380 4380 - - - - Northstar 8500 1024 PPR (400-440) G07 Z 400-S449 - - - - - - - - 5140 5140 5140 5140 Northstar SL56 1024 PPR G08 Z 140-180 - 1400 1400 - - - - - - - - - Avtron HS35A G09 Z 140-360 - 875 875 875 875 875 875 875 - - - - Encoder - Special Special Y75 Z 140-S449 - cf cf cf cf cf cf cf cf cf cf cf Export Packaging Special B10 Z 140-S449 140-440 cf cf cf cf cf cf cf cf cf cf cf Fans Bronze M10 Z 140-S449 140-440 418 418 540 575 720 870 910 1014 1400 1400 1400 Duty Group C&D, F&G, 1.0SF M82 Z - 140-440 235 235 235 235 235 235 235 235 235 235 - Only Insulation Class H C00 Z 140-S449 140-440 82 82 82 105 175 230 294 425 606 1573 1573 Vacuum Pressure Impregnation (VPI) C01 Z 140-S449 140-440 1120 1120 1120 1120 1440 1440 1820 2300 2500 2500 3600 Moisture/Powerhouse (extra C04 Z 140-S449 140-440 105 105 105 137 227 294 373 524 722 1234 1234 dip & bake) Tropicalization Moisture (extra dip & bake, fungus spray) C08 Z 140-S449 140-440 146 146 146 189 314 405 510 708 961 1528 1528 For further details please refer to section 9 For availability on Flanges and End shields as Options see page 9-14 5-12 2009-2010 Low Voltage AC Selection and Pricing Guide

Options Duty Description Order Code Code Pos Type / Frame List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 RGZESDI RGZZESDI 145 184 215 256 286 326 365 405 445 449 Leads / Terminal Blocks Terminal Block - 3 lead only K83 Z 140-360 - 150 150 150 225 225 330 330 - - - - Leads, Special Cable Length Y85 Z 140-S449 - cf cf cf cf cf cf cf cf cf cf cf Lubrication Special Grease (High & Low L57 Z 140-S449 140-440 325 600 600 600 600 825 825 1100 1100 1100 1100 Temp) (Mobil 28) Special Grease (Mobilith L58 Z 140-S449 140-440 225 225 225 225 225 425 425 425 425 425 425 SHC 100) Paint Paint - 3 Part Epoxy N01 Z 140-S449 140-440 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 (Carboline or Ameron) Paint - 2 Part Epoxy N02 Z 140-S449 140-440 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 Standard Primer Only N03 Z 140-S449 140-440 385 385 385 385 385 385 385 385 385 385 385 Standard Paint, Special Y60 Z 140-S449 140-440 385 385 385 385 385 385 385 385 385 385 385 Color Special Paint, Special Color Y61 Z 140-S449 140-440 cf cf cf cf cf cf cf cf cf cf cf Protective Devices - Windings PTC thermistors, 3 B 15 140-S449 140-440 425 425 425 425 425 425 425 425 425 425 425 embedded temperature sensors for tripping PTC thermistors, 6 C 15 140-S449 140-440 850 850 850 850 850 850 850 850 850 850 850 embedded temperature sensors for alarm and tripping KTY84-130, 2 embedded F 15 140-S449 140-440 658 658 658 658 658 658 658 658 658 658 658 temperature sensors Thermocouples, coil head J 15 360-440 360-440 - - - - - - 1186 1186 1186 1186 1186 Winding temperature K 15 360-S449 360-440 - - - - - - 1996 1996 1996 1996 1996 protection, Stator RTD's (coil head, 1 per phase), 100Ω Platinum, complete with auxiliary box with terminal strip opposite to main box Protective Devices - Bearings Bearing thermal protection, Bearing RTDs with connection head and terminal block - both ends, 100Ω Platinum A51 Z 400-S449 - - - - - - - - 2200 2200 2200 2200 For further details please refer to section 9 S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 5-13 Dimensions

Introduction General Purpose Duty Duty Purpose Options Duty Description Order Code Code Pos Type / Frame List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 RGZESDI RGZZESDI 145 184 215 256 286 326 365 405 445 449 Shafts Carbon Steel (C4140) M57 Z 400-S449 400-440 - - - - - - - 2975 3190 3365 3365 Shaft DE Special to Y50 Z 140-S449 140-440 cf cf cf cf cf cf cf cf cf cf cf er Specifications Shaft ODE Special to Y51 Z 140-S449 140-440 cf cf cf cf cf cf cf cf cf cf cf er Specifications NEMA Standard Short Shaft M53 Z 140-S449 140-440 91 91 91 122 185 266 301 333 368 368 368 - ODE NEMA Standard Long Shaft M52 Z 140-S449 140-440 91 91 91 122 185 266 301 333 368 368 368 - ODE Shaft Grounding Brush Shaft Grounding Brush L29 Z 140-S449-1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 Shaft Seal Brass Seal L84 Z - 140-440 42 42 42 44 59 72 87 102 102 102 - Software Nonstandard Dimension F43 Z 140-S449 140-440 350 350 350 350 350 350 350 350 350 350 350 Sheet er Specific F50 Z 140-S449 140-440 350 350 350 350 350 350 350 350 350 350 350 Sheets Special Calculated F07 Z 140-S449 140-440 850 850 850 850 850 850 850 850 850 850 850 Space Heater 115V, Single Phase, A43 Z - 140-440 292 292 292 292 436 436 524 640 758 856 - Ex. Proof Testing Routine Test Report - F12 Z 140-S449 140-440 1100 1100 1100 1100 1100 1320 1500 1720 1860 2420 3040 (Witnessed) Complete Test F15 Z 140-S449 140-440 4560 4560 4560 4560 4560 5300 6480 7400 8040 8960 13520 Complete Test (Witnessed) F17 Z 140-S449 140-440 6840 6840 6840 6840 6840 7960 9720 11100 12060 13440 20280 Calibration Test F27 Z 140-S449 140-440 3420 3420 3420 3420 3420 3975 4860 5550 6030 6720 10140 Electrical Duplicate - F36 Z 140-S449 140-440 200 200 200 200 200 200 200 200 200 200 200 (Routine Test) Electrical Duplicate (Complete Test) F37 Z 140-S449 140-440 300 300 300 300 300 300 300 300 300 300 300 Noise F30 Z 140-S449 140-440 2800 2800 2800 2800 2800 2800 3600 3600 3600 3600 3600 Noise (Witnessed) F32 Z 140-S449 140-440 4400 4400 4400 4400 4400 4400 5200 5200 5200 5200 5200 Routine Test Report with F22 Z 140-S449 140-440 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 Vibration Test (Witnessed) Vertical Jacking Vertical Jacking Provision M39 Z 280-S449 280-440 - - - - 600 600 600 600 600 600 600 Vibration Detectors Vibraswitch Robert Shaw A66 Z 280-S449 280-440 - - - - 2650 2650 2650 3250 3250 3250 3250 malfunction detector Model 366 - D8 120VAC Provision for vibration sensors (PMC/Beta) on D.E. & O.D.E A67 Z 280-S449 - - - - - 2375 2375 2375 2875 2875 2875 2875 For further details please refer to section 9 S449 Dimensions 5-14 2009-2010 Low Voltage AC Selection and Pricing Guide

Options Duty Description Voltage Special Voltage 200-460V Special Voltage 461-600V Part Winding Start - 200V, 60Hz Part Winding Start - 230V, 60Hz Part Winding Start - 460V, 60Hz Part Winding Start - 575V, 60Hz Wye Start - Delta Run - 200V, 60Hz Wye Start - Delta Run - 230V, 60Hz Wye Start - Delta Run - 460V, 60Hz Wye Start - Delta Run - 575V, 60Hz Order Code Code Pos 9-0 + 12, M1Y 13+Z 9-0 + 12, M2Y 13+Z 20 12 &13 21 12 &13 22 12 &13 23 12 &13 30 12 &13 31 12 &13 32 12 &13 33 12 &13 For further details please refer to section 9 Type / Frame List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 RGZESDI RGZZESDI 145 184 215 256 286 326 365 405 445 449 S449 140-S449 140-440 81 81 81 112 134 323 366 479 796 979 979 140-S449 140-440 81 81 81 112 134 323 366 479 796 979 979 280-360 280-360 - - - - 104 126 185 - - - - 280-360 280-360 - - - - 104 126 185 - - - - 280-S449 280-440 - - - - 104 126 185 290 482 506 506 280-S449 280-440 - - - - 104 126 185 290 482 506 506 280-360 280-360 - - - - 104 126 185 - - - - 280-360 280-360 - - - - 104 126 185 - - - - 280-S449 280-440 - - - - 104 126 185 290 482 506 506 280-S449 280-440 - - - - 104 126 185 290 482 506 506 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 5-15 Dimensions

Notes Dimensions Introduction Purpose Duty Duty General Purpose 5-16 2009-2010 Low Voltage AC Selection and Pricing Guide

Purpose - TEFC P-Base RGZVESD - Vertical Solid Shaft - Normal Thrust RGZVESD P-base vertical solid shaft motors are ideal for applications such as centrifugal and turbine pumps. Specifications 1 to 250 HP 1.15 service factor, 40ºC ambient Continuous thrust: Up: 355 to 1,860 lbs. Down: 380 to 2,800 lbs. 3600, 1800, 1200, or 900 RPM 3 phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above; 200 & 575 volt available Class F insulation, Class B temperature rise NEMA design B, continuous duty 143 HP through 449 HP frame Features for Long Life Frame & Bearing Housings These motors feature a cast iron frame and end shields for exceptional structural integrity. A drive end T-drain, drip cover and lifting lugs are included. Rotor A offset rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel shaft for maximum rotor performance. Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary inverter rated NEMA Class F non-hygroscopic insulation system with Class B temperature rise, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. This insulation system meets or exceeds NEMA MG1-2006, Part 31, making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable ball bearings with cast iron caps. Alemite grease fittings on the inlets, and pipe plugs on the relief ports for ease of routine maintenance. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprene-gasketed and rotatable in 90º increments for quick and easy connections. A ground lug is included. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens vertical motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose Specifications table begins on the next page 2009-2010 Low Voltage AC Selection and Pricing Guide 6-1 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Purpose - TEFC P-Base RGZVESD - Vertical Solid Shaft - Normal Thrust HP RPM Frame Voltage Type Cont. Thrust 1Yr. Life Min. Up (lbs) Down (lbs) 6-2 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ FL FL Nom. Amps* Eff. (%) High Efficiency 1 1800 143HP 230/460 RGZVESD 380 355 1PC28111BB216TA3 500 1.5 82.5 70 1 1200 145HP 230/460 RGZVESD 445 415 1PC28111BC316TA3 678 1.6 82.5 75 1 900 182HP 230/460 RGZVESD 495 465 1PC28111DD116TA3 1037 1.9 77 85 1.5 3600 143HP 230/460 RGZVESD 295 275 1PC28111BA216TA3 643 1.9 82.5 70 1.5 1800 145HP 230/460 RGZVESD 385 330 1PC28111BB316TA3 578 2.2 84 75 1.5 1200 182HP 230/460 RGZVESD 550 510 1PC28111DC116TA3 802 2.3 84 85 1.5 900 184HP 230/460 RGZVESD 615 570 1PC28111DD216TA3 1170 2.6 78.5 100 2 3600 145HP 230/460 RGZVESD 295 275 1PC28111BA316TA3 678 2.5 84 75 2 1800 145HP 230/460 RGZVESD 385 350 1PC28111BB416TA3 655 2.7 84 75 2 1200 184HP 230/460 RGZVESD 550 510 1PC28111DC216TA3 923 3 85.5 100 2 900 213HP 230/460 RGZVESD 615 570 1PC28112AD316TA3 1340 3.3 81.5 135 Weight (lbs) 3 3600 182HP 230/460 RGZVESD 365 340 1PC28111DA116TA3 890 3.6 85.5 85 3 1800 182HP 230/460 RGZVESD 480 430 1PC28111DB116TA3 785 3.9 86.5 85 3 1200 213HP 230/460 RGZVESD 785 725 1PC28112AC316TA3 1218 4 86.5 135 3 900 215HP 230/460 RGZVESD 875 810 1PC28112AD416TA3 1685 4.7 82.5 160 5 3600 184HP 230/460 RGZVESD 375 330 1PC28111DA216TA3 1248 5.8 86.5 100 5 1800 184HP 230/460 RGZVESD 485 425 1PC28111DB216TA3 1093 6.5 86.5 100 5 1200 215HP 230/460 RGZVESD 790 720 1PC28112AC416TA3 1715 6.8 87.5 160 5 900 254HP 230/460 RGZVESD 885 805 1PC28112BD316TA3 2063 7.5 85.5 245 7.5 3600 213HP 230/460 RGZVESD 525 475 1PC28112AA316TA3 1548 8.8 87.5 135 7.5 1800 213HP 230/460 RGZVESD 685 610 1PC28112AB316TA3 1498 9.5 88.5 135 7.5 1200 254HP 230/460 RGZVESD 1130 1025 1PC28112BC316TA3 2045 9.8 88.5 245 7.5 900 256HP 230/460 RGZVESD 1260 1150 1PC28112BD416TA3 2505 11.5 86.5 285 10 3600 215HP 230/460 RGZVESD 530 470 1PC28112AA416TA3 1685 12 88.5 160 10 1800 215HP 230/460 RGZVESD 690 605 1PC28112AB416TA3 1685 12.5 88.5 160 10 1200 256HP 230/460 RGZVESD 1140 1015 1PC28112BC416TA3 2310 13 88.5 285 10 900 284HP 230/460 RGZVESD 1275 1140 1PC28112CD316TA3 3045 15 89.5 485 15 3600 254HP 230/460 RGZVESD 760 670 1PC28112BA316TA3 1943 17 88.5 245 15 1800 254HP 230/460 RGZVESD 980 870 1PC28112BB316TA3 2013 18.7 90.2 245 15 1200 284HP 230/460 RGZVESD 1170 985 1PC28112CC316TA3 2693 20 89.5 485 15 900 286HP 230/460 RGZVESD 1310 1100 1PC28112CD416TA3 3703 23 89.5 520 20 3600 256HP 230/460 RGZVESD 765 665 1PC28112BA416TA3 2125 23 88.5 285 20 1800 256HP 230/460 RGZVESD 995 855 1PC28112BB416TA3 2295 26 90.2 285 20 1200 286HP 230/460 RGZVESD 1190 965 1PC28112CC416TA3 3273 26 90.2 520 20 900 324HP 230/460 RGZVESD 1330 1080 1PC28113AD316TA3 4522 31 89.5 565 25 3600 284HP 460 RGZVESD 785 645 1PC28112CA312TA3 2289 29 90.2 485 25 1800 284HP 460 RGZVESD 1020 830 1PC28112CB312TA3 2558 29 91.7 485 25 1200 324HP 460 RGZVESD 1795 1535 1PC28113AC312TA3 3830 33 91 565 25 900 326HP 460 RGZVESD 2000 1720 1PC28113AD412TA3 5184 38 88.5 710 30 3600 286HP 460 RGZVESD 795 635 1PC28112CA412TA3 2478 34 90.2 520 30 1800 286HP 460 RGZVESD 1035 815 1PC28112CB412TA3 2878 35 91.7 520 30 1200 326HP 460 RGZVESD 1820 1510 1PC28113AC412TA3 4373 39 91 710 30 900 364HP 460 RGZVESD 2320 1860 1PC28113CD312TA3 6013 46.8 89.5 800 40 3600 324HP 460 RGZVESD 1205 1005 1PC28113AA312TA3 3402 45 92.4 565 40 1800 324HP 460 RGZVESD 1570 1290 1PC28113AB312TA3 3428 47 92.4 565 40 1200 364HP 460 RGZVESD 2075 1675 1PC28113CC312TA3 5725 52 92.4 800 40 900 365HP 460 RGZVESD 2340 1840 1PC28113CD412TA3 7184 63 90.2 875 Stock Model

Purpose - TEFC P-Base RGZVESD - Vertical Solid Shaft - Normal Thrust HP RPM Frame Voltage Type Cont. Thrust 1Yr. Life Min. Up (lbs) Down (lbs) List Price $ FL FL Nom. Amps* Eff. (%) High Efficiency Weight (lbs) 50 3600 326HP 460 RGZVESD 1215 995 1PC28113AA412TA3 4268 55 92.4 710 50 1800 326HP 460 RGZVESD 1585 1275 1PC28113AB412TA3 4065 58 92.4 710 50 1200 365HP 460 RGZVESD 2095 1660 1PC28113CC412TA3 6750 66 92.4 875 50 900 404HP 460 RGZVESD 2370 1810 1PC28114AD312TA3 8591 67 90.2 1290 60 3600 364HP 460 RGZVESD 1410 1080 1PC28113CA312TA3 5432 68 92.4 800 60 1800 364HP 460 RGZVESD 1795 1435 1PC28113CB312TA3 5389 71 92.4 800 60 1200 404HP 460 RGZVESD 2155 1595 1PC28114AC312TA3 7697 74 93 1290 60 900 405HP 460 RGZVESD 2410 1770 1PC28114AD412TA3 9742 78 90.2 1420 75 3600 365HP 460 RGZVESD 1420 1070 1PC28113CA412TA3 6715 85 93 875 75 1800 365HP 460 RGZVESD 1815 1415 1PC28113CB412TA3 6720 87 93 875 75 1200 405HP 460 RGZVESD 2195 1555 1PC28114AC412TA3 9025 93 93.6 1420 75 900 444HP 460 RGZVESD 2495 1685 1PC28114HD112TA3 12777 94 91.7 1740 100 3600 405HP 460 RGZVESD 1475 1015 1PC28114AA412TA3 8945 108 93 1420 100 1800 405HP 460 RGZVESD 1915 1315 1PC28114AB412TA3 8293 113 93.6 1420 100 1200 444HP 460 RGZVESD 2315 1435 1PC28114HC112TA3 12065 117 93.6 1740 100 900 445HP 460 RGZVESD 2565 1615 1PC28114HD212TA3 15655 123 93 1930 125 1800 444HP 460 RGZVESD 1975 1255 1PC28114HB112TA3 10857 143 94.1 1740 125 1200 445HP 460 RGZVESD 2385 1365 1PC28114HC212TA3 14585 144 93.6 1930 125 900 447HP 460 RGZVESD 2670 1510 1PC28114HD312TA3 17985 152 92.4 2280 150 1800 445HP 460 RGZVESD 2060 1170 1PC28114HB212TA3 12525 170 94.5 1930 150 1200 447HP 460 RGZVESD 2400 1350 1PC28114HC312TA3 18125 170 94.1 2280 150 900 447HP 460 RGZVESD 2730 1450 1PC28114HD412TA3 20451 186 93 2280 200 1800 447HP 460 RGZVESD 2115 1115 1PC28114HB312TA3 17120 225 94.5 2280 200 1200 449HP 460 RGZVESD 2450 1300 1PC28114HC512TA3 20650 226 94.1 2600 200 900 449HP 460 RGZVESD 2800 1380 1PC28114HD612TA3 23010 241 93.6 2600 250 1800 449HP 460 RGZVESD 2185 1045 1PC28114HB512TA3 19890 281 94.5 2600 250 1200 449HP 460 RGZVESD 2520 1230 1PC28114HC612TA3 22710 280 94.1 2600 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Stock Model Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 6-3 Dimensions

Introduction General Purpose Duty Duty Purpose - TEFC P-Base RGZZVESD - VSS Normal Thrust - Class I, Group D, Division 1 RGZZVESD P-base vertical solid shaft explosion-proof motors are UL listed for use in Class I, Group D, Division 1 hazardous areas and are ideal for applications such as centrifugal and turbine pumps. Specifications 1 to 250 HP 1.0 service factor, 40ºC ambient T2D temperature code Continuous thrust: Up: 355 to 1,860 lbs. Down: 380 to 2,800 lbs. 3600, 1800, 1200, or 900 RPM 3 phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above; 200 & 575 volt available Class F insulation, Class B temperature rise NEMA design B, continuous duty 143 HP through 449 HP frame Features for Long Life Frame & Bearing Housings These motors feature a cast iron frame and end shields for exceptional structural integrity. A drive end sintered condensation / breather drain, drip cover, and lifting lugs are included. Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance and lowers stator losses. Insulation Proprietary Class F non-hygroscopic insulation system with NEMA Class B temperature rise, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. Two series-connected normally closed Class B thermostats are supplied as standard. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable ball bearings with cast iron caps. Alemite grease fittings on the inlets, and pipe plugs on the relief ports for ease of routine maintenance. Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. High Efficiency Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split and rotatable in 90º increments for quick and easy connections. A ground lug is provided. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Dimensions Purpose 6-4 2009-2010 Low Voltage AC Selection and Pricing Guide

Purpose - TEFC P-Base RGZZVESD - VSS Normal Thrust - Class I, Group D, Division 1 HP RPM Frame Voltage Type Cont. Thrust 1Yr. Life Min. Up (lbs) Down (lbs) List Price $ Multiplier Symbol FL Amps* High Efficiency FL Nom. Eff. (%) 1 1800 143HP 230/460 RGZZVESD 380 355 1PC28411BB216TG3 816 SA-7EN 1.5 82.5 80 1 1200 145HP 230/460 RGZZVESD 445 415 1PC28411BC316TG3 998 SA-7EN 1.6 82.5 85 1 900 182HP 230/460 RGZZVESD 495 465 1PC28411DD116TG3 1331 SA-7EN 1.9 77 130 1.5 3600 143HP 230/460 RGZZVESD 295 275 1PC28411BA216TG3 962 SA-7EN 1.9 82.5 80 1.5 1800 145HP 230/460 RGZZVESD 385 330 1PC28411BB316TG3 896 SA-7EN 2.2 84 85 1.5 1200 182HP 230/460 RGZZVESD 550 510 1PC28411DC116TG3 1124 SA-7EN 2.3 84 130 1.5 900 184HP 230/460 RGZZVESD 615 570 1PC28411DD216TG3 1459 SA-7EN 2.6 78.5 135 2 3600 145HP 230/460 RGZZVESD 295 275 1PC28411BA316TG3 998 SA-7EN 2.5 84 85 2 1800 145HP 230/460 RGZZVESD 385 350 1PC28411BB416TG3 974 SA-7EN 2.7 84 85 2 1200 184HP 230/460 RGZZVESD 550 510 1PC28411DC216TG3 1285 SA-7EN 3 85.5 135 2 900 213HP 230/460 RGZZVESD 615 570 1PC28412AD316TG3 1681 SA-7EN 3.3 81.5 175 Weight (lbs) 3 3600 182HP 230/460 RGZZVESD 365 340 1PC28411DA116TG3 1214 SA-7EN 3.6 85.5 130 3 1800 182HP 230/460 RGZZVESD 480 430 1PC28411DB116TG3 1140 SA-7EN 3.9 86.5 130 3 1200 213HP 230/460 RGZZVESD 785 725 1PC28412AC316TG3 1586 SA-7EN 4 86.5 175 3 900 215HP 230/460 RGZZVESD 875 810 1PC28412AD416TG3 2165 SA-7EN 4.7 82.5 195 5 3600 184HP 230/460 RGZZVESD 375 330 1PC28411DA216TG3 1617 SA-7EN 5.8 86.5 135 5 1800 184HP 230/460 RGZZVESD 485 425 1PC28411DB216TG3 1459 SA-7EN 6.5 86.5 135 5 1200 215HP 230/460 RGZZVESD 790 720 1PC28412AC416TG3 2196 SA-7EN 6.8 87.5 195 5 900 254HP 230/460 RGZZVESD 885 805 1PC28412BD316TG3 2550 SA-7EN 7.5 85.5 295 7.5 3600 213HP 230/460 RGZZVESD 525 475 1PC28412AA316TG3 1923 SA-7EN 8.8 87.5 175 7.5 1800 213HP 230/460 RGZZVESD 685 610 1PC28412AB316TG3 1974 SA-7EN 9.5 88.5 175 7.5 1200 254HP 230/460 RGZZVESD 1130 1025 1PC28412BC316TG3 2533 SA-7EN 9.8 88.5 295 7.5 900 256HP 230/460 RGZZVESD 1260 1150 1PC28412BD416TG3 3233 SA-7EN 11.5 86.5 365 10 3600 215HP 230/460 RGZZVESD 530 470 1PC28412AA416TG3 2165 SA-7EN 12 88.5 195 10 1800 215HP 230/460 RGZZVESD 690 605 1PC28412AB416TG3 2165 SA-7EN 12.5 88.5 195 10 1200 256HP 230/460 RGZZVESD 1140 1015 1PC28412BC416TG3 3172 SA-7EN 13 88.5 365 10 900 284HP 230/460 RGZZVESD 1275 1140 1PC28412CD316TG3 3808 SA-7EN 15 89.5 410 15 3600 254HP 230/460 RGZZVESD 760 670 1PC28412BA316TG3 2428 SA-7EN 17 88.5 295 15 1800 254HP 230/460 RGZZVESD 980 870 1PC28412BB316TG3 2869 SA-7EN 18.7 90.2 295 15 1200 284HP 230/460 RGZZVESD 1170 985 1PC28412CC316TG3 4022 SA-7EN 20 89.5 410 15 900 286HP 230/460 RGZZVESD 1310 1100 1PC28412CD416TG3 4677 SA-7EN 23 89.5 460 20 3600 256HP 230/460 RGZZVESD 765 665 1PC28412BA416TG3 2984 SA-7EN 23 88.5 365 20 1800 256HP 230/460 RGZZVESD 995 855 1PC28412BB416TG3 3157 SA-7EN 26 90.2 365 20 1200 286HP 230/460 RGZZVESD 1190 965 1PC28412CC416TG3 4613 SA-7EN 26 90.2 460 20 900 324HP 230/460 RGZZVESD 1330 1080 1PC28413AD316TG3 5781 SA-7EN 31 89.5 589 25 3600 284HP 460 RGZZVESD 785 645 1PC28412CA312TG3 3565 SA-7EN 29 90.2 410 25 1800 284HP 460 RGZZVESD 1020 830 1PC28412CB312TG3 3884 SA-7EN 29 91.7 410 25 1200 324HP 460 RGZZVESD 1795 1535 1PC28413AC312TG3 5641 SA-7EN 33 91 589 25 900 326HP 460 RGZZVESD 2000 1720 1PC28413AD412TG3 6393 SA-7EN 38 88.5 738 30 3600 286HP 460 RGZZVESD 795 635 1PC28412CA412TG3 3803 SA-7EN 34 90.2 460 30 1800 286HP 460 RGZZVESD 1035 815 1PC28412CB412TG3 4211 SA-7EN 35 91.7 460 30 1200 326HP 460 RGZZVESD 1820 1510 1PC28413AC412TG3 6194 SA-7EN 39 91 738 30 900 364HP 460 RGZZVESD 2320 1860 1PC28413CD312TG3 7898 SA-7EN 46.8 89.5 865 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model *FL Amps at 460V or 575V All RGZZVESD motors will be discontinued when present stock is depleted 6-5 Introduction General Purpose Duty Duty Purpose Dimensions

Purpose - TEFC P-Base Introduction General Purpose Duty Duty Purpose RGZZVESD - VSS Normal Thrust - Class I, Group D, Division 1 HP RPM Frame Voltage Type Cont. Thrust 1Yr. Life Min. Up (lbs) Down (lbs) List Price $ Multiplier Symbol FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 40 3600 324HP 460 RGZZVESD 1205 1005 1PC28413AA312TG3 5069 SA-7EN 45 92.4 589 40 1800 324HP 460 RGZZVESD 1570 1290 1PC28413AB312TG3 5231 SA-7EN 47 92.4 589 40 1200 364HP 460 RGZZVESD 2075 1675 1PC28413CC312TG3 8135 SA-7EN 52 92.4 865 40 900 365HP 460 RGZZVESD 2340 1840 1PC28413CD412TG3 9047 SA-7EN 63 90.2 915 50 3600 326HP 460 RGZZVESD 1215 995 1PC28413AA412TG3 5579 SA-7EN 55 92.4 738 50 1800 326HP 460 RGZZVESD 1585 1275 1PC28413AB412TG3 5880 SA-7EN 58 92.4 738 50 1200 365HP 460 RGZZVESD 2095 1660 1PC28413CC412TG3 9180 SA-7EN 66 92.4 915 50 900 404HP 460 RGZZVESD 2370 1810 1PC28414AD312TG3 11369 SA-7EN 67 90.2 1290 60 3600 364HP 460 RGZZVESD 1410 1080 1PC28413CA312TG3 7211 SA-7EN 68 92.4 865 60 1800 364HP 460 RGZZVESD 1795 1435 1PC28413CB312TG3 7426 SA-7EN 71 92.4 865 60 1200 404HP 460 RGZZVESD 2155 1595 1PC28414AC312TG3 10357 SA-7EN 74 93 1290 60 900 405HP 460 RGZZVESD 2410 1770 1PC28414AD412TG3 11369 SA-7EN 78 90.2 1420 75 3600 365HP 460 RGZZVESD 1420 1070 1PC28413CA412TG3 8818 SA-7EN 85 93 915 75 1800 365HP 460 RGZZVESD 1815 1415 1PC28413CB412TG3 8928 SA-7EN 87 93 915 75 1200 405HP 460 RGZZVESD 2195 1555 1PC28414AC412TG3 11738 SA-7EN 93 93.6 1420 75 900 444HP 460 RGZZVESD 2495 1685 1PC28414HD112TG3 15188 SA-7EN 94 91.7 1740 100 3600 405HP 460 RGZZVESD 1475 1015 1PC28414AA412TG3 10787 SA-7EN 108 93 1420 100 1800 405HP 460 RGZZVESD 1915 1315 1PC28414AB412TG3 10389 SA-7EN 113 93.6 1420 100 1200 444HP 460 RGZZVESD 2315 1435 1PC28414HC112TG3 15412 SA-7EN 117 93.6 1740 100 900 445HP 460 RGZZVESD 2565 1615 1PC28414HD212TG3 18018 SA-7EN 123 93 1930 125 1800 444HP 460 RGZZVESD 1975 1255 1PC28414HB112TG3 13337 SA-7EN 143 94.1 1740 125 1200 445HP 460 RGZZVESD 2385 1365 1PC28414HC212TG3 17983 SA-7EN 144 93.6 1930 125 900 447HP 460 RGZZVESD 2670 1510 1PC28414HD312TG3 20992 SA-7EN 152 92.4 2450 150 1800 445HP 460 RGZZVESD 2060 1170 1PC28414HB212TG3 15606 SA-7EN 170 94.5 1930 150 1200 447HP 460 RGZZVESD 2400 1350 1PC28414HC312TG3 22068 SA-7EN 170 94.1 2450 150 900 447HP 460 RGZZVESD 2730 1450 1PC28414HD412TG3 22899 SA-7EN 186 93 2450 200 1800 447HP 460 RGZZVESD 2115 1115 1PC28414HB312TG3 21043 SA-7EN 225 94.5 2450 200 1200 449HP 460 RGZZVESD 2450 1300 1PC28414HC512TG3 24041 SA-7EN 226 94.1 2650 200 900 449HP 460 RGZZVESD 2800 1380 1PC28414HD612TG3 25719 SA-7EN 241 93.6 2650 250 1800 449HP 460 RGZZVESD 2185 1045 1PC28414HB512TG3 23271 SA-7EN 281 94.5 2650 250 1200 449HP 460 RGZZVESD 2520 1230 1PC28414HC612TG3 26148 SA-7EN 280 94.1 2650 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only Stock Model *FL Amps at 460V or 575V All RGZZVESD motors will be discontinued when present stock is depleted Dimensions 6-6 2009-2010 Low Voltage AC Selection and Pricing Guide

Purpose - TEFC P-Base RGZVILESD - Vertical Solid Shaft - In-Line Thrust RGZVILESD motors are ideal for dependable and energy efficient operation in applications such as centrifugal and turbine pumps. Specifications 3 to 250 HP 1.15 service factor, 40ºC ambient Continuous thrust: Up: 785 to 3,735 lbs. Down: 735 to 1,550 lbs. Radial: 930 to 2,140 lbs. 3600, 1800, or 1200 RPM 3 phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above; 200 & 575 volt available Class F insulation, Class B temperature rise NEMA design B, continuous duty 182LP through 449LP frame Features for Long Life Frame & Bearing Housings Vertical inline solid shaft severe duty motors feature a cast iron frame and end shields for exceptional structural integrity. A drive end T-drain, drip cover and lifting lugs are included. Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation Proprietary inverterrated Class F non-hygroscopic insulation system with NEMA Class B temperature rise, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. This insulation system meets or exceeds NEMA MG1-2006, Part 31, making all motors suitable for operation with adjustable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable drive end is open ball bearing (182LP 256LP frames), double shielded ball bearing (284LP 449LP frames); opposite drive end is a duplex angular contact thrust bearing (143LP 449LP frames) with cast iron caps. Alemite grease fittings on the inlets, and pipe plugs on the relief ports for ease of routine maintenance. High Efficiency Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split, neoprenegasketed and rotatable in 90º increments for quick and easy connections. Includes a ground lug and non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable All Siemens vertical motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 6-7 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Purpose - TEFC P-Base RGZVILESD - Vertical Solid Shaft - In-Line Thrust HP RPM Frame Voltage Type Continuous Thrust 2Yr. Life Min. Up (lbs) Down (lbs) Rad. (lbs) 6-8 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Multiplier Symbol FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 3 3600 182LP 230/460 RGZVILESD 785 735 930 1PC28311DA416TA3 1182 SA-7EN 3.6 85.5 133 3 1800 182LP 230/460 RGZVILESD 980 910 1160 1PC28311DB416TA3 1150 SA-7EN 3.9 86.5 133 3 1200 213LP 230/460 RGZVILESD 1115 1055 1320 1PC28312AC516TA3 1374 SA-7EN 4 86.5 215 5 3600 184LP 230/460 RGZVILESD 785 735 930 1PC28311DA516TA3 1306 SA-7EN 5.8 86.5 144 5 1800 184LP 230/460 RGZVILESD 980 910 1160 1PC28311DB516TA3 1233 SA-7EN 6.5 86.5 144 5 1200 215LP 230/460 RGZVILESD 1120 1050 1320 1PC28312AC616TA3 1788 SA-7EN 6.8 87.5 160 7.5 3600 213LP 230/460 RGZVILESD 785 735 930 1PC28312AA516TA3 1613 SA-7EN 8.8 87.5 215 7.5 1800 213LP 230/460 RGZVILESD 980 910 1160 1PC28312AB516TA3 1560 SA-7EN 9.5 88.5 215 7.5 1200 254LP 230/460 RGZVILESD 1350 1240 1600 1PC28312BC516TA3 2130 SA-7EN 9.8 88.5 245 10 3600 215LP 230/460 RGZVILESD 790 730 930 1PC28312AA616TA3 1755 SA-7EN 12 88.5 160 10 1800 215LP 230/460 RGZVILESD 985 905 1160 1PC28312AB616TA3 1755 SA-7EN 12.5 88.5 160 10 1200 256LP 230/460 RGZVILESD 1360 1230 1600 1PC28312BC616TA3 2405 SA-7EN 13 88.5 330 15 3600 254LP 230/460 RGZVILESD 945 855 1100 1PC28312BA516TA3 2023 SA-7EN 17 88.5 245 15 1800 254LP 230/460 RGZVILESD 1185 1075 1400 1PC28312BB516TA3 2098 SA-7EN 18.7 90.2 245 15 1200 284LPH 230/460 RGZVILESD 1975 1785 2120 1PC28312EC116TA3 2896 SA-7EN 20 89.5 375 20 3600 256LP 230/460 RGZVILESD 950 850 1100 1PC28312BA616TA3 2270 SA-7EN 23 88.5 285 20 1800 256LP 230/460 RGZVILESD 1200 1060 1400 1PC28312BB616TA3 2390 SA-7EN 26 90.2 285 20 1200 286LPH 230/460 RGZVILESD 1990 1770 2120 1PC28312EC416TA3 3410 SA-7EN 26 90.2 520 25 3600 284LPH 460 RGZVILESD 1460 1320 1475 1PC28312EA112TA3 2714 SA-7EN 29 90.2 375 25 1800 284LPH 460 RGZVILESD 1725 1535 1850 1PC28312EB112TA3 2665 SA-7EN 29 91.7 375 25 1200 324LP 460 RGZVILESD 2010 1750 1875 1PC28313AC512TA3 3988 SA-7EN 33 91 565 30 3600 286LPH 460 RGZVILESD 1470 1310 1475 1PC28312EA412TA3 2880 SA-7EN 34 90.2 430 30 1800 286LPH 460 RGZVILESD 1740 1520 1850 1PC28312EB412TA3 2998 SA-7EN 35 91.7 430 30 1200 326LP 460 RGZVILESD 2035 1725 1875 1PC28313AC612TA3 4458 SA-7EN 39 91 600 40 3600 324LP 460 RGZVILESD 1490 1290 1600 1PC28313AA512TA3 3840 SA-7EN 45 92.4 565 40 1800 324LP 460 RGZVILESD 1770 1490 1650 1PC28313AB512TA3 3715 SA-7EN 47 92.4 565 40 1200 364LP 460 RGZVILESD 2540 2140 2120 1PC28313CC512TA3 5673 SA-7EN 52 92.4 800 50 3600 326LP 460 RGZVILESD 1505 1275 1600 1PC28313AA612TA3 4706 SA-7EN 55 92.4 600 50 1800 326LP 460 RGZVILESD 1785 1475 1650 1PC28313AB612TA3 4359 SA-7EN 58 92.4 600 50 1200 365LP 460 RGZVILESD 2560 2120 2120 1PC28313CC612TA3 6675 SA-7EN 66 92.4 875 60 3600 364LP 460 RGZVILESD 1840 1510 1475 1PC28313CA512TA3 5857 SA-7EN 68 92.4 800 60 1800 364LP 460 RGZVILESD 2330 2060 1850 1PC28313CB512TA3 5814 SA-7EN 71 92.4 800 60 1200 404LP 460 RGZVILESD 2620 2060 2120 1PC28314AC512TA3 7610 SA-7EN 74 93 1290 75 3600 365LP 460 RGZVILESD 1850 1500 1475 1PC28313CA612TA3 7140 SA-7EN 85 93 875 75 1800 365LP 460 RGZVILESD 2345 1945 1850 1PC28313CB612TA3 7145 SA-7EN 87 93 875 75 1200 405LP 460 RGZVILESD 2660 2020 2120 1PC28314AC612TA3 8951 SA-7EN 93 93.6 1300 100 3600 405LP 460 RGZVILESD 1905 1445 1475 1PC28314AA612TA3 9633 SA-7EN 108 93 1300 100 1800 405LP 460 RGZVILESD 2445 1845 1850 1PC28314AB612TA3 8682 SA-7EN 113 93.6 1300 100 1200 444LP 460 RGZVILESD 2780 1900 2120 1PC28314JC112TA3 11876 SA-7EN 117 93.6 1740 125 1800 444LP 460 RGZVILESD 2530 1760 1850 1PC28314JB112TA3 11031 SA-7EN 143 94.1 1740 125 1200 445LP 460 RGZVILESD 2850 1830 2120 1PC28314JC212TA3 15335 SA-7EN 144 93.6 1930 150 1800 445LP 460 RGZVILESD 2590 1700 1850 1PC28314JB212TA3 12880 SA-7EN 170 94.5 1930 150 1200 447LP 460 RGZVILESD 2945 1735 2120 1PC28314JC312TA3 17835 SA-7EN 170 94.1 2280 200 1800 447LP 460 RGZVILESD 2650 1645 1850 1PC28314JB312TA3 16848 SA-7EN 225 94.5 2280 200 1200 449LP 460 RGZVILESD 3040 1640 2120 1PC28314JC512TA3 17866 SA-7EN 226 94.1 2600 250 1800 449LP 460 RGZVILESD 2710 1590 1850 1PC28314JB512TA3 18458 SA-7EN 281 94.5 2600 250 1200 449LP 460 RGZVILESD 3735 1550 2120 1PC28314JC612TA3 19328 SA-7EN 280 94.1 2600 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V Stock Model

Purpose - P-Base RGZZVILESD - VSS - In-Line Thrust - Class I, Group D, Division 1 RGZZVILESD P-base in-line vertical solid shaft high efficiency explosionproof motors are UL listed for use in Class I, Group D, Division 1 hazardous areas and are ideal for applications such as centrifugal and turbine pumps. Specifications 3 to 250 HP 1.0 service factor, 40ºC ambient T2D temperature code Continuous thrust: Up: 785 to 3,735 lbs. Down: 735 to 1,550 lbs. Radial: 930 to 2,140 lbs. 3600, 1800, 1200, or 900 RPM 3 phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above; 200 & 575 volt available Class F insulation, Class B temperature rise NEMA design B, continuous duty 182LP through 449LP frame Features for Long Life Frame & End Bearing Housings These motors feature a cast iron frame and end shields for exceptional structural integrity. A drive end sintered condensation / breather drain, drip cover and lifting lugs are included. Rotor A unique rotor design provides improved efficiency while larger bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a high strength carbon steel shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation Proprietary Class F non-hygroscopic insulation system with NEMA Class B temperature rise, provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges. Two series-connected normally closed Class B thermostats are supplied as standard. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling. Cast iron fan covers are provided on all frame sizes. Bearings Regreasable, drive end is open ball bearing (182LP 256LP frames), double-shielded ball bearing (284LP 449LP frames); opposite drive end is a duplex angular contact thrust bearing (143LP 449LP frames) with cast iron caps. Alemite grease fittings on the inlets, and pipe plugs on the relief ports for ease of routine maintenance. High Efficiency Lubrication A specially formulated, high temperature, polyurea based grease is used to provide more than four times the lubrication life of other greases. Oversized Conduit Box Cast iron construction that is larger than industry standards, diagonally-split and rotatable in 90º increments for quick and easy connections. A ground lug is provided. Non-wicking, clearly and permanently marked leads. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion. Modifiable & All Siemens motors are available with a wide variety of modifications and custom designs to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 6-9 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Purpose - TEFC P-Base RGZZVILESD - VSS - In-Line Thrust - Class I, Group D, Division 1 HP RPM Frame Voltage Type Continuous Thrust 2Yr. Life Min. Up (lbs) Down (lbs) Rad. (lbs) 6-10 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Multiplier Symbol FL Amps* High Efficiency FL Nom. Eff. (%) Weight (lbs) 3 3600 182LP 230/460 RGZZVILESD 785 735 930 1PC28611DA416TG3 1450 SA-7EN 3.6 85.5 130 3 1800 182LP 230/460 RGZZVILESD 980 910 1160 1PC28611DB416TG3 1418 SA-7EN 3.9 86.5 135 3 1200 213LP 230/460 RGZZVILESD 1115 1055 1320 1PC28612AC516TG3 1667 SA-7EN 4 86.5 175 5 3600 184LP 230/460 RGZZVILESD 785 735 930 1PC28611DA516TG3 1671 SA-7EN 5.8 86.5 135 5 1800 184LP 230/460 RGZZVILESD 980 910 1160 1PC28611DB516TG3 1505 SA-7EN 6.5 86.5 135 5 1200 215LP 230/460 RGZZVILESD 1120 1050 1320 1PC28612AC616TG3 2270 SA-7EN 6.8 87.5 195 7.5 3600 213LP 230/460 RGZZVILESD 785 735 930 1PC28612AA516TG3 1989 SA-7EN 8.8 87.5 175 7.5 1800 213LP 230/460 RGZZVILESD 980 910 1160 1PC28612AB516TG3 2038 SA-7EN 9.5 88.5 175 7.5 1200 254LP 230/460 RGZZVILESD 1350 1240 1600 1PC28612BC516TG3 2619 SA-7EN 9.8 88.5 295 10 3600 215LP 230/460 RGZZVILESD 790 730 930 1PC28612AA616TG3 2237 SA-7EN 12 88.5 195 10 1800 215LP 230/460 RGZZVILESD 985 905 1160 1PC28612AB616TG3 2237 SA-7EN 12.5 88.5 195 10 1200 256LP 230/460 RGZZVILESD 1360 1230 1600 1PC28612BC616TG3 3269 SA-7EN 13 88.5 365 15 3600 254LP 230/460 RGZZVILESD 945 855 1100 1PC28612BA516TG3 2509 SA-7EN 17 88.5 295 15 1800 254LP 230/460 RGZZVILESD 1185 1075 1400 1PC28612BB516TG3 2956 SA-7EN 18.7 90.2 295 15 1200 284LPH 230/460 RGZZVILESD 1975 1785 2120 1PC28612EC116TG3 4136 SA-7EN 20 89.5 410 20 3600 256LP 230/460 RGZZVILESD 950 850 1100 1PC28612BA616TG3 3073 SA-7EN 23 88.5 365 20 1800 256LP 230/460 RGZZVILESD 1200 1060 1400 1PC28612BB616TG3 3254 SA-7EN 26 90.2 365 20 1200 286LPH 230/460 RGZZVILESD 1990 1770 2120 1PC28612EC416TG3 4753 SA-7EN 26 90.2 460 25 3600 284LPH 460 RGZZVILESD 1460 1320 1475 1PC28612EA112TG3 3660 SA-7EN 29 90.2 410 25 1800 284LPH 460 RGZZVILESD 1725 1535 1850 1PC28612EB112TG3 3993 SA-7EN 29 91.7 410 25 1200 324LP 460 RGZZVILESD 2010 1750 1875 1PC28613AC512TG3 5598 SA-7EN 33 91 589 30 3600 286LPH 460 RGZZVILESD 1470 1310 1475 1PC28612EA412TG3 3907 SA-7EN 34 90.2 460 30 1800 286LPH 460 RGZZVILESD 1740 1520 1850 1PC28612EB412TG3 4333 SA-7EN 35 91.7 460 30 1200 326LP 460 RGZZVILESD 2035 1725 1875 1PC28613AC612TG3 6143 SA-7EN 39 91 589 40 3600 324LP 460 RGZZVILESD 1490 1290 1600 1PC28613AA512TG3 5440 SA-7EN 45 92.4 589 40 1800 324LP 460 RGZZVILESD 1770 1490 1650 1PC28613AB512TG3 5190 SA-7EN 47 92.4 589 40 1200 364LP 460 RGZZVILESD 2540 2140 2120 1PC28613CC512TG3 8068 SA-7EN 52 92.4 865 50 3600 326LP 460 RGZZVILESD 1505 1275 1600 1PC28613AA612TG3 6008 SA-7EN 55 92.4 589 50 1800 326LP 460 RGZZVILESD 1785 1475 1650 1PC28613AB612TG3 5834 SA-7EN 58 92.4 589 50 1200 365LP 460 RGZZVILESD 2560 2120 2120 1PC28613CC612TG3 9104 SA-7EN 66 92.4 915 60 3600 364LP 460 RGZZVILESD 1840 1510 1475 1PC28613CA512TG3 7757 SA-7EN 68 92.4 865 60 1800 364LP 460 RGZZVILESD 2330 2060 1850 1PC28613CB512TG3 7370 SA-7EN 71 92.4 865 60 1200 404LP 460 RGZZVILESD 2620 2060 2120 1PC28614AC512TG3 10268 SA-7EN 74 93 1290 75 3600 365LP 460 RGZZVILESD 1850 1500 1475 1PC28613CA612TG3 9450 SA-7EN 85 93 915 75 1800 365LP 460 RGZZVILESD 2345 1945 1850 1PC28613CB612TG3 8857 SA-7EN 87 93 915 75 1200 405LP 460 RGZZVILESD 2660 2020 2120 1PC28614AC612TG3 11636 SA-7EN 93 93.6 1335 100 3600 405LP 460 RGZZVILESD 1905 1445 1475 1PC28614AA612TG3 11703 SA-7EN 108 93 1335 100 1800 405LP 460 RGZZVILESD 2445 1845 1850 1PC28614AB612TG3 10300 SA-7EN 113 93.6 1335 100 1200 444LP 460 RGZZVILESD 2780 1900 2120 1PC28614JC112TG3 15216 SA-7EN 117 93.6 1740 125 1800 444LP 460 RGZZVILESD 2530 1760 1850 1PC28614JB112TG3 13170 SA-7EN 143 94.1 1740 125 1200 445LP 460 RGZZVILESD 2850 1830 2120 1PC28614JC212TG3 18957 SA-7EN 144 93.6 1930 150 1800 445LP 460 RGZZVILESD 2590 1700 1850 1PC28614JB212TG3 15400 SA-7EN 170 94.5 1930 150 1200 447LP 460 RGZZVILESD 2945 1735 2120 1PC28614JC312TG3 21772 SA-7EN 170 94.1 2450 200 1800 447LP 460 RGZZVILESD 2650 1645 1850 1PC28614JB312TG3 20765 SA-7EN 225 94.5 2450 200 1200 449LP 460 RGZZVILESD 3040 1640 2120 1PC28614JC512TG3 21315 SA-7EN 226 94.1 2650 250 1800 449LP 460 RGZZVILESD 2710 1590 1850 1PC28614JB512TG3 21661 SA-7EN 281 94.5 2650 250 1200 449LP 460 RGZZVILESD 3735 1550 2120 1PC28614JC612TG3 22402 SA-7EN 280 94.1 2650 Prices and specifications are subject to change without notice Stock availability subject to sale delivery for stocked motors only *FL Amps at 460V or 575V All RGZZVILESD motors will be discontinued when present stock is depleted Stock Model

Purpose (Vertical ) Description Code Order Code Pos RGZVESD RGZVILESD Type / Frame List Price Adder Per Frame ($) RGZZVESD RGZZVILESD 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 Altitude / Ambient Rerate/Derate Y80 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Conduit Box - Main Orient 90 deg CCW J84 Z 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 Orient 180 deg CCW J85 Z 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 Orient 270 deg CCW J86 Z 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 Conduit Box - Auxiliary for Thermostats Condulet to Main Box J12 Z 140-440 - 165 165 165 165 165 165 165 165 165 165 165 Conduit Box - Auxiliary for Space Heaters Condulet to Main Box J52 Z 140-440 - 165 165 165 165 165 165 165 165 165 165 165 Grounding Provision (tapped hole on L27 Z 140-440 140-440 95 95 95 110 110 125 125 125 175 175 175 frame w/bolt) Hardware Stainless Steel L22 Z 140-440 - 134 134 134 134 134 165 203 250 308 379 425 Lifting Eyebolt 3 L20 Z Standard Standard 30 std std std std std std std std std std Duty Group D, F&G, 1.15SF M80 Z - 140-250 235 235 235 235 - - - - - - - (Rerate) Insulation Fungus Protection C07 Z 140-440 140-440 142 142 142 208 208 208 208 360 360 360 360 Leads / Terminal Blocks Burndy Hydent type YA K80 Z 140-440 140-440 115 115 115 115 115 115 115 115 115 115 115 Sealed Leads K89 Z 140-440 Standard 150 150 150 150 150 150 200 200 200 200 200 Lubrication Grease Fitting / Pressure L60 Z 140-440 140-440 125 125 125 125 125 125 125 125 125 125 125 Relief Nameplate Extra M21 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Division 2 4 M22 Z 140-440 - 205 205 205 205 205 205 205 205 205 205 205 Change (Rerate/Derate) Y80 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Auxiliary Y82 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 For further details please refer to section 8 S449 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 6-11 Dimensions

Introduction General Purpose Duty Duty Purpose Purpose (Vertical ) Description Code Order Code Pos Type / Frame List Price Adder Per Frame ($) RGZVESD RGZVILESD RGZZVESD RGZZVILESD 143 145 182 184 213 215 254 256 284 286 324 326 364 365 404 405 444 445 447 449 Protective Devices - Windings Thermostats, normally G 15 140-440 Standard 150 150 150 150 150 200 200 300 300 370 370 closed, 2 per motor Rotation Arrow Bidirectional (not applicable K70 Z 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 for uni-directional motors) Clockwise (facing ODE) K71 Z 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 Counterclockwise (facing K72 Z 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 ODE) Service Factor Rerate/Derate Y80 Z 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Software Documentation in Spanish D05 Z 140-440 140-440 0 0 0 0 0 0 0 0 0 0 0 Certificate of Compliance F00 Z 140-440 140-440 200 200 200 200 200 200 200 200 200 200 200 Standard Transmittal F40 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Standard Dimension Sheet F42 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Conduit Box Dimension F44 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Sheet Wiring Diagram F45 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 IOM F46 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Renewal Parts F47 Z 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 Sheets F49 Z 140-440 140-440 175 175 175 175 175 175 175 175 175 175 175 F03 Z 140-440 140-440 500 500 500 500 500 500 500 500 500 500 500 Space Heater 115V, Single Phase A40 Z 140-440 - 237 237 237 237 351 351 351 407 407 407 407 230V, Single Phase A41 Z 140-440 - 237 237 237 237 351 351 351 407 407 407 407 115V, Single Phase, Div 2 A42 Z 140-440 - 292 292 292 292 436 436 524 640 758 856 856 230V, Single Phase, Div 2 A44 Z 140-440 - 292 292 292 292 436 436 524 640 758 856 856 Testing Routine Test Report F10 Z 140-440 140-440 200 200 200 200 200 200 200 200 200 200 200 Routine Test Report with F20 Z 140-440 140-440 400 400 400 400 400 400 400 400 400 400 400 Vibration Test Voltage Single Voltage - 230V 11 12&13 20HP 20HP 85 85 95 110 - - - - - - - (outside leads connection only) Single Voltage - 460V (outside leads connection only) 12 12&13 20HP 20HP 85 85 95 110 - - - - - - - For further details please refer to section 8 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. S449 Dimensions 6-12 2009-2010 Low Voltage AC Selection and Pricing Guide

Options Purpose (Vertical ) Description Type / Frame List Price Adder Per Frame ($) Order 143 182 213 254 284 324 364 404 444 447 RGZVESD S449 Code Code RGZVILESD 145 184 215 256 286 326 365 405 445 449 Pos Auxiliary boxes Auxiliary conduit box location (Digit 2) Condulet to main conduit J 2 Z 140-440 165 165 165 165 165 165 165 165 165 165 165 box Auxiliary box - opposite of main conduit box side J 5 Z 280-440 165 165 165 165 291 291 291 291 291 291 291 Temperature detector device (Digit 1) Select the number that corresponds with the appropriate Temperature Detector Device to create your initial 3 digital ordering code. Thermistors. 0 Thermostats. 1 KTY 84 Thermistor 2 Space heaters 5 Stator RTD's to auxiliary J35 280-440 - - - - 291 291 291 291 291 291 291 conduit box of opposite of main box side Balance Precision M69 Z 140-440 - 128 128 147 147 167 167 211 211 404 404 Couplings er Supplied H10 Z 140-440 325 325 325 325 325 325 480 480 480 480 480 Export Packaging Sea Freight - Siemens B09 Z 140-440 225 225 225 225 510 760 760 1010 1010 1010 - Standard Special B10 Z 140-440 cf cf cf cf cf cf cf cf cf cf cf Fans Bronze M10 Z 140-440 418 418 540 575 720 870 910 1014 1400 1400 1400 Insulation Class H C00 Z 140-440 82 82 82 105 175 230 294 425 606 1573 1573 Vacuum Pressure Impregnation (VPI) C01 Z 140-440 1120 1120 1120 1120 1440 1440 1820 2300 2500 2500 3600 Moisture/Powerhouse (extra C04 Z 140-440 105 105 105 137 227 294 373 524 722 1234 1234 dip & bake) Tropicalization Moisture (extra dip & bake, fungus spray) C08 Z 140-440 146 146 146 189 314 405 510 708 961 1528 1528 For further details please refer to section 9 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 6-13 Dimensions

Introduction General Purpose Duty Duty Purpose Options Purpose (Vertical ) Description Order Code Code Pos Type / Frame List Price Adder Per Frame ($) RGZVESD RGZVILESD 143 145 182 184 213 215 254 256 284 286 324 326 364 365 404 405 444 445 447 449 Leads / Terminal Blocks Terminal Block - 3 lead only K83 Z 140-360 150 150 150 225 225 330 330 - - - - Leads, Special Cable Length Y85 Z 140-440 cf cf cf cf cf cf cf cf cf cf cf Lubrication Special Grease (High & Low L57 Z 140-440 325 600 600 600 600 825 825 1100 1100 1100 1100 Temp) (Mobil 28) Special Grease (Mobilith L58 Z 140-440 225 225 225 225 225 425 425 425 425 425 425 SHC 100) Paint Paint - 3 Part Epoxy N01 Z 140-440 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 (Carboline or Ameron) Paint - 2 Part Epoxy N02 Z 140-440 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 Standard Primer Only N03 Z 140-440 385 385 385 385 385 385 385 385 385 385 385 Standard Paint, Special Color Y60 Z 140-440 385 385 385 385 385 385 385 385 385 385 385 Special Paint, Special Color Y61 Z 140-440 cf cf cf cf cf cf cf cf cf cf cf Protective Devices - Windings PTC thermistors, 3 B 15 140-440 425 425 425 425 425 425 425 425 425 425 425 embedded temperature sensors for tripping PTC thermistors, 6 C 15 140-440 850 850 850 850 850 850 850 850 850 850 850 embedded temperature sensors for alarm and tripping KTY84-130, 2 embedded F 15 140-440 658 658 658 658 658 658 658 658 658 658 658 temperature sensors Thermocouples, coil head J 15 360-440 - - - - - - 1186 1186 1186 1186 1186 Winding temperature K 15 360-440 - - - - - - 1996 1996 1996 1996 1996 protection, Stator RTD's (coil head, 1 per phase), 100Ω Platinum, complete with auxiliary box with terminal strip opposite to main box Protective Devices - Bearings Bearing thermal protection, A51 Z 400-440 - - - - - - - 2200 2200 2200 2200 Bearing RTDs with connection head and terminal block - both ends, 100Ω Platinum Shafts Carbon Steel (C4140) M57 Z 400-440 - - - - - - - 2975 3190 3365 3365 Shaft DE Special to er Specifications Y50 Z 140-440 cf cf cf cf cf cf cf cf cf cf cf For further details please refer to section 9 S449 Dimensions 6-14 2009-2010 Low Voltage AC Selection and Pricing Guide

Options Purpose (Vertical ) Description Order Code Code Pos Type / Frame List Price Adder Per Frame ($) RGZVESD RGZVILESD 143 145 182 184 213 215 254 256 284 286 324 326 364 365 404 405 444 445 447 449 Software Nonstandard Dimension F43 Z 140-440 350 350 350 350 350 350 350 350 350 350 350 Sheet er Specific F50 Z 140-440 350 350 350 350 350 350 350 350 350 350 350 Sheets Special Calculated F07 Z 140-440 850 850 850 850 850 850 850 850 850 850 850 Space Heater 115V, Single Phase, Ex. A43 Z - 292 292 292 292 436 436 524 640 758 856 - Proof Testing Routine Test Report - F12 Z 140-440 1100 1100 1100 1100 1100 1320 1500 1720 1860 2420 3040 (Witnessed) Complete Test F15 Z 140-440 4560 4560 4560 4560 4560 5300 6480 7400 8040 8960 13520 Complete Test (Witnessed) F17 Z 140-440 6840 6840 6840 6840 6840 7960 9720 11100 12060 13440 20280 Calibration Test F27 Z 140-440 3420 3420 3420 3420 3420 3975 4860 5550 6030 6720 10140 Electrical Duplicate - F36 Z 140-440 200 200 200 200 200 200 200 200 200 200 200 (Routine Test) Electrical Duplicate (Complete Test) F37 Z 140-440 300 300 300 300 300 300 300 300 300 300 300 Noise F30 Z 140-440 2800 2800 2800 2800 2800 2800 3600 3600 3600 3600 3600 Noise (Witnessed) F32 Z 140-440 4400 4400 4400 4400 4400 4400 5200 5200 5200 5200 5200 Routine Test Report with F22 Z 140-440 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 Vibration Test (Witnessed) Vibration Detectors Vibraswitch Robert Shaw A66 Z 280-440 - - - - 2650 2650 2650 3250 3250 3250 3250 malfunction detector Model 366 - D8 120VAC Provision for vibration A67 Z 280-440 - - - - 2375 2375 2375 2875 2875 2875 2875 sensors (PMC/Beta) on D.E. & O.D.E Voltage Special Voltage 200-460V 9-0 + 12, 140-440 81 81 81 112 134 323 366 479 796 979 979 M1Y 13+Z Special Voltage 461-600V 9-0 + 12, 140-440 81 81 81 112 134 323 366 479 796 979 979 M2Y 13+Z Part Winding Start - 200V, 20 12 280-360 - - - - 104 126 185 - - - - 60Hz &13 Part Winding Start - 230V, 21 12 280-360 - - - - 104 126 185 - - - - 60Hz &13 Part Winding Start - 460V, 22 12 280-440 - - - - 104 126 185 290 482 506 506 60Hz &13 Part Winding Start - 575V, 23 12 280-440 - - - - 104 126 185 290 482 506 506 60Hz &13 Wye Start - Delta Run - 30 12 280-360 - - - - 104 126 185 - - - - 200V, 60Hz &13 Wye Start - Delta Run - 31 12 280-360 - - - - 104 126 185 - - - - 230V, 60Hz &13 Wye Start - Delta Run - 460V, 60Hz 32 12 &13 280-440 - - - - 104 126 185 290 482 506 506 Wye Start - Delta Run - 575V, 60Hz 33 12 &13 280-440 - - - - 104 126 185 290 482 506 506 S449 Introduction General Purpose Duty Duty Purpose For further details please refer to section 9 2009-2010 Low Voltage AC Selection and Pricing Guide 6-15 Dimensions

Notes Dimensions Introduction Purpose Duty Duty General Purpose 6-16 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFCs 1LA7 The 1LA7 motors, with their wide variety of options, fit in every drive system concept and cover more than 90% of all imaginable applications worldwide, suitable for indoor and outdoor applications where light weight and excellent price/performance ratio and high degree of operational reliability are required. This powerful energy-saving motor is less harmful to the environment thanks to reduction in CO 2 emission. Specifications 90W to 18.5kW Overload reserve in continuous mode (SF 1.1) Dual Frequency rated 3000, 1500, 1000, 750 RPM 3600, 1800, 1200, 900 RPM 3 phase, 50 Hz; 230VD/400VY and 60 Hz; 460VY 3 phase, 50 Hz; 400VD/690VY and 60 Hz; 460VD All commonly used voltages (50Hz and 60Hz) available EU/CEMEP efficiency classification EFF2 (Improved efficiency) Class F insulation, Class B temperature rise Continuous Duty, Suitable for Converted fed operation CE Marked, IEC 60034 NEMA MG1-12 compatibility available UL and CSA label marks available 56 through 160 frame Features for Long Life Frame & End Shields Cast aluminum construction for exceptional heat dissipation and structural integrity. All motors are designed with degree of protection IP55 (IEC 529), suitable for use in dusty or damp surroundings, ready for their use in the tropics. (IP56 and IP65 available) Specifications table begins on the next page Rotor A unique offset laminated rotor core design provides improved efficiency while larger bars and Aluminum end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced (IEC 60034-14) for extended bearing life. Stator/Windings Manufactured with premium electrical grade steel laminations and the finest copper electrical magnet wire for lower losses and improved efficiencies. A unique stator core design lowers flux density and increases cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation DURIGNIT IR 2000, inverter-compatible up to 500 V, optionally up to 690 V. This insulation system comprised of high-grade enameled wires and insulating sheet materials combine with solvent-free impregnating resin. The system ensures a high level of mechanical and electrical strength as well as good serviceability and long motor life. The insulation offers general protection for the windings against corrosive gases, vapors, dust, oil and increased humidity, and resists the normal stresses of vibration. Cooling are fitted with a radial-flow fan which functions independently of the direction of rotation (cooling method IC 411 to DIN EN 60034-6). The material of the external cooling fans is reinforced plastic. This material is tested and certified for a 20 year lifetime. Fan cowls are made of corrosion protected steel plate. Bearings The bearing nominal life is specified by standard calculation (DIN ISO 281) and is achieved or exceeds by 90% if used according to instructions, if the operating conditions are below average a bearing life of 100,000 (Lh10 hours) can be achieved. Standard Efficiency Lubrication The grease life, for pre-lubricated motors, is tailored to the bearing life. In those cases where re-lubrication is chosen, the motors are provided with a grease retaining system that prevents grease from entering the motor. Siemens IEC motors use a lithium based grease. Conduit Box Cast aluminum construction, top mounted as standard, the terminal box can be ordered to either side of the motor or be rotated 90º or 180º (frames size 80 and above) providing a more flexible outing. In addition to the standard terminal box earthing, an external earthing is also made available for all motors upon request. Corrosion Resistance Zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion. (Stainless steel hardware also available) Flexible All Siemens IEC motors are available with a wide variety of options to meet your specific motor needs. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-1 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions IEC - TEFCs 1LA7 - Foot Mounted kw 50Hz kw 60Hz RPM 50Hz Frame Type DE Bearing Part Number 7-2 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz Weight (kg) 0.06 0.07 1500 56M 1LA7 BALL 1LA7050-4AB10 204 CA-EF20 0.2 56.0% 3.0 0.09 0.1 3000 56M 1LA7 BALL 1LA7050-2AA10 204 CA-EF20 0.26 63.0% 3.0 0.09 0.1 1500 56M 1LA7 BALL 1LA7053-4AB10 205 CA-EF20 0.29 58.0% 3.0 0.09 0.1 1000 63M 1LA7 BALL 1LA7063-6AB10 225 CA-EF20 0.44 45.0% 4.1 0.09 0.1 750 71M 1LA7 BALL 1LA7070-8AB10 255 CA-EF20 0.36 53.0% 6.3 0.12 0.14 3000 56M 1LA7 BALL 1LA7053-2AA10 205 CA-EF20 0.32 65.0% 3.0 0.12 0.14 1500 63M 1LA7 BALL 1LA7060-4AB10 203 SA-EF20 0.42 55.0% 3.5 0.12 0.14 1000 71M 1LA7 BALL 1LA7073-8AB10 287 CA-EF20 0.51 53.0% 6.3 0.18 0.21 3000 63M 1LA7 BALL 1LA7060-2AA10 205 CA-EF20 0.5 63.0% 3.5 0.18 0.21 1500 63M 1LA7 BALL 1LA7063-4AB10 217 SA-EF20 0.56 60.0% 4.1 0.18 0.21 1000 71M 1LA7 BALL 1LA7070-6AA10 234 CA-EF20 0.67 53.0% 5.0 0.18 0.21 750 80M 1LA7 BALL 1LA7080-8AB10 301 CA-EF20 0.75 51.0% 9.0 0.25 0.29 3000 63M 1LA7 BALL 1LA7063-2AA10 217 CA-EF20 0.68 65.0% 4.1 0.25 0.29 1500 71M 1LA7 BALL 1LA7070-4AB10 220 CA-EF20 0.77 60.0% 4.8 0.25 0.29 1000 71M 1LA7 BALL 1LA7073-6AA10 262 CA-EF20 0.79 60.0% 6.3 0.25 0.29 750 80M 1LA7 BALL 1LA7083-8AB10 372 CA-EF20 1.02 55.0% 10.0 0.37 0.43 3000 71M 1LA7 BALL 1LA7070-2AA10 224 CA-EF20 1 66.0% 5.0 0.37 0.43 1500 71M 1LA7 BALL 1LA7073-4AB10 247 CA-EF20 1.06 65.0% 6.0 0.37 0.43 1000 80M 1LA7 BALL 1LA7080-6AA10 285 CA-EF20 1.2 62.0% 9.0 0.37 0.43 750 90S 1LA7 BALL 1LA7090-8AB10 451 CA-EF20 1.14 63.0% 10.5 0.55 0.63 3000 71M 1LA7 BALL 1LA7073-2AA10 253 CA-EF20 1.36 71.0% 6.0 0.55 0.63 1500 80M 1LA7 BALL 1LA7080-4AA10 274 SA-EF20 1.46 67.0% 9.0 0.55 0.63 1000 80M 1LA7 BALL 1LA7083-6AA10 330 SA-EF20 1.6 67.0% 10.0 0.55 0.63 750 90L 1LA7 BALL 1LA7096-8AB10 549 CA-EF20 1.58 66.0% 13.2 0.75 0.86 3000 80M 1LA7 BALL 1LA7080-2AA10 285 CA-EF20 1.73 73.0% 9.0 0.75 0.86 1500 80M 1LA7 BALL 1LA7083-4AA10 297 CA-EF20 1.91 72.0% 10.0 0.75 0.86 1000 90S 1LA7 BALL 1LA7090-6AA10 384 CA-EF20 2.05 69.0% 12.5 0.75 0.86 750 100L 1LA7 BALL 1LA7106-8AB10 603 CA-EF20 2.15 66.0% 19.0 1.1 1.3 3000 80M 1LA7 BALL 1LA7083-2AA10 327 CA-EF20 2.4 77.0% 11.0 1.1 1.3 1500 90S 1LA7 BALL 1LA7090-4AA10 364 CA-EF20 2.55 77.0% 13.0 1.1 1.3 1000 90L 1LA7 BALL 1LA7096-6AA10 476 CA-EF20 2.85 72.0% 15.7 1.1 1.3 750 100L 1LA7 BALL 1LA7107-8AB10 764 CA-EF20 2.9 72.0% 22.0 1.5 1.75 3000 90S 1LA7 BALL 1LA7090-2AA10 389 CA-EF20 3.25 79.0% 12.9 1.5 1.75 1500 90L 1LA7 BALL 1LA7096-4AA10 432 CA-EF20 3.40 79.0% 15.6 1.5 1.75 1000 100L 1LA7 BALL 1LA7106-6AA10 580 CA-EF20 3.9 74.0% 21.0 1.5 1.75 750 112M 1LA7 BALL 1LA7113-8AB60 906 CA-EF20 3.85 74.0% 24.0 2.2 2.55 3000 90L 1LA7 BALL 1LA7096-2AA10 501 CA-EF20 4.55 82.0% 15.7 2.2 2.55 1500 100L 1LA7 BALL 1LA7106-4AA10 545 CA-EF20 4.7 82.0% 21.0 2.2 2.55 1000 112M 1LA7 BALL 1LA7113-6AA60 727 CA-EF20 5.2 78.0% 26.0 2.2 2.55 750 132S 1LA7 BALL 1LA7130-8AB60 1170 CA-EF20 5.7 75.0% 38.0 3 3.45 3000 100L 1LA7 BALL 1LA7106-2AA10 620 CA-EF20 6.1 84.0% 22.0 3 3.45 1500 100L 1LA7 BALL 1LA7107-4AA10 627 CA-EF20 6.4 83.0% 24.0 3 3.45 1000 132S 1LA7 BALL 1LA7130-6AA60 918 CA-EF20 7.2 79.0% 38.0 3 3.45 750 132M 1LA7 BALL 1LA7133-8AB60 1430 CA-EF20 7.6 77.0% 44.0 4 4.6 3000 112M 1LA7 BALL 1LA7113-2AA60 764 CA-EF20 7.8 86.0% 29.0 4 4.6 1500 112M 1LA7 BALL 1LA7113-4AA60 798 CA-EF20 8.2 85.0% 31.0 4 4.6 1000 132M 1LA7 BALL 1LA7133-6AA60 1140 CA-EF20 9.4 80.5% 44.0 4 4.6 750 160M 1LA7 BALL 1LA7163-8AB60 1750 CA-EF20 10 80.0% 64.0 5.5 6.3 3000 132S 1LA7 BALL 1LA7130-2AA60 984 CA-EF20 10.4 86.5% 39.0 5.5 6.3 1500 132S 1LA7 BALL 1LA7130-4AA60 1020 CA-EF20 11.4 86.0% 41.0 5.5 6.3 1000 132M 1LA7 BALL 1LA7134-6AA60 1450 CA-EF20 12.6 83.0% 52.0 5.5 6.3 750 160M 1LA7 BALL 1LA7164-8AB60 2180 CA-EF20 13 83.5% 74.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model

IEC - TEFCs 1LA7 - Foot Mounted kw 50Hz kw 60Hz RPM 50Hz Frame Type DE Bearing Part Number List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz 7.5 8.6 3000 132S 1LA7 BALL 1LA7131-2AA60 1260 CA-EF20 13.8 88.0% 48.0 7.5 8.6 1500 132M 1LA7 BALL 1LA7133-4AA60 1310 CA-EF20 15.2 87.0% 49.0 7.5 8.6 1000 160M 1LA7 BALL 1LA7163-6AA60 1880 CA-EF20 17 86.0% 74.0 7.5 8.6 750 160L 1LA7 BALL 1LA7166-8AB60 2690 CA-EF20 17.6 85.5% 94.0 11 12.6 3000 160M 1LA7 BALL 1LA7163-2AA60 1750 CA-EF20 20 89.5% 68.0 11 12.6 1500 160M 1LA7 BALL 1LA7163-4AA60 1790 CA-EF20 21.5 88.5% 73.0 11 12.6 1000 160L 1LA7 BALL 1LA7166-6AA60 2600 CA-EF20 24.5 87.5% 95.0 15 17.3 3000 160M 1LA7 BALL 1LA7164-2AA60 2290 CA-EF20 26.5 90.0% 77.0 15 17.3 1500 160L 1LA7 BALL 1LA7166-4AA60 2320 CA-EF20 28.5 90.0% 85.0 18.5 21.3 3000 160L 1LA7 BALL 1LA7166-2AA60 2730 CA-EF20 32 91.0% 86.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Weight (kg) Stock Model Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-3 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions IEC - TEFCs 1LA7 - Foot Mounted and PTC (1x Phase) kw 50Hz kw 60Hz RPM Frame Type DE Bearing Part Number 7-4 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz Weight (kg) 0.06 0.07 1500 56M 1LA7 BALL 1LA7050-4AB10-Z A11 280 CA-EF20 0.2 56.0% 3.0 0.09 0.1 3000 56M 1LA7 BALL 1LA7050-2AA10-Z A11 280 CA-EF20 0.26 63.0% 3.0 0.09 0.1 1500 56M 1LA7 BALL 1LA7053-4AB10-Z A11 281 CA-EF20 0.29 58.0% 3.0 0.09 0.1 1000 63M 1LA7 BALL 1LA7063-6AB10-Z A11 301 CA-EF20 0.44 45.0% 4.1 0.09 0.1 750 71M 1LA7 BALL 1LA7070-8AB10-Z A11 331 CA-EF20 0.36 53.0% 6.3 0.12 0.14 3000 56M 1LA7 BALL 1LA7053-2AA10-Z A11 281 CA-EF20 0.32 65.0% 3.0 0.12 0.14 1500 63M 1LA7 BALL 1LA7060-4AB10-Z A11 284 CA-EF20 0.42 55.0% 3.5 0.12 0.14 750 71M 1LA7 BALL 1LA7073-8AB10-Z A11 363 CA-EF20 0.51 53.0% 6.3 0.18 0.21 3000 63M 1LA7 BALL 1LA7060-2AA10-Z A11 287 CA-EF20 0.5 63.0% 3.5 0.18 0.21 1500 63M 1LA7 BALL 1LA7063-4AB10-Z A11 300 SA-EF20 0.56 60.0% 4.1 0.18 0.21 1000 71M 1LA7 BALL 1LA7070-6AA10-Z A11 318 CA-EF20 0.67 53.0% 5.0 0.18 0.21 750 80M 1LA7 BALL 1LA7080-8AB10-Z A11 389 CA-EF20 0.75 51.0% 9.0 0.25 0.29 3000 63M 1LA7 BALL 1LA7063-2AA10-Z A11 300 CA-EF20 0.68 65.0% 4.1 0.25 0.29 1500 71M 1LA7 BALL 1LA7070-4AB10-Z A11 296 CA-EF20 0.77 60.0% 4.8 0.25 0.29 1000 71M 1LA7 BALL 1LA7073-6AA10-Z A11 346 CA-EF20 0.79 60.0% 6.3 0.25 0.29 750 80M 1LA7 BALL 1LA7083-8AB10-Z A11 460 CA-EF20 1.02 55.0% 10.0 0.37 0.43 3000 71M 1LA7 BALL 1LA7070-2AA10-Z A11 306 CA-EF20 1 66.0% 5.0 0.37 0.43 1500 71M 1LA7 BALL 1LA7073-4AB10-Z A11 323 CA-EF20 1.06 65.0% 6.0 0.37 0.43 1000 80M 1LA7 BALL 1LA7080-6AA10-Z A11 382 CA-EF20 1.2 62.0% 9.0 0.37 0.43 750 90S 1LA7 BALL 1LA7090-8AB10-Z A11 539 CA-EF20 1.14 63.0% 10.5 0.55 0.63 3000 71M 1LA7 BALL 1LA7073-2AA10-Z A11 328 SA-EF20 1.36 71.0% 6.0 0.55 0.63 1500 80M 1LA7 BALL 1LA7080-4AA10-Z A11 362 CA-EF20 1.46 67.0% 9.0 0.55 0.63 1000 80M 1LA7 BALL 1LA7083-6AA10-Z A11 428 CA-EF20 1.6 67.0% 10.0 0.55 0.63 750 90L 1LA7 BALL 1LA7096-8AB10-Z A11 637 CA-EF20 1.58 66.0% 13.2 0.75 0.86 3000 80M 1LA7 BALL 1LA7080-2AA10-Z A11 373 SA-EF20 1.73 73.0% 9.0 0.75 0.86 1500 80M 1LA7 BALL 1LA7083-4AA10-Z A11 384 CA-EF20 1.91 72.0% 10.0 0.75 0.86 1000 90S 1LA7 BALL 1LA7090-6AA10-Z A11 484 CA-EF20 2.05 69.0% 12.5 0.75 0.86 750 100L 1LA7 BALL 1LA7106-8AB10-Z A11 704 CA-EF20 2.15 66.0% 19.0 1.1 1.3 3000 80M 1LA7 BALL 1LA7083-2AA10-Z A11 415 CA-EF20 2.4 77.0% 11.0 1.1 1.3 1500 90S 1LA7 BALL 1LA7090-4AA10-Z A11 450 CA-EF20 2.55 77.0% 13.0 1.1 1.3 1000 90L 1LA7 BALL 1LA7096-6AA10-Z A11 578 CA-EF20 2.85 72.0% 15.7 1.1 1.3 750 100L 1LA7 BALL 1LA7107-8AB10-Z A11 865 CA-EF20 2.9 72.0% 22.0 1.5 1.75 3000 90S 1LA7 BALL 1LA7090-2AA10-Z A11 475 CA-EF20 3.25 79.0% 12.9 1.5 1.75 1500 90L 1LA7 BALL 1LA7096-4AA10-Z A11 518 CA-EF20 3.4 79.0% 15.6 1.5 1.75 1000 100L 1LA7 BALL 1LA7106-6AA10-Z A11 681 CA-EF20 3.9 74.0% 21.0 1.5 1.75 750 112M 1LA7 BALL 1LA7113-8AB60-Z A11 1007 CA-EF20 3.85 74.0% 24.0 2.2 2.55 3000 90L 1LA7 BALL 1LA7096-2AA10-Z A11 588 CA-EF20 4.55 82.0% 15.7 2.2 2.55 1500 100L 1LA7 BALL 1LA7106-4AA10-Z A11 646 CA-EF20 4.7 82.0% 21.0 2.2 2.55 1000 112M 1LA7 BALL 1LA7113-6AA60-Z A11 828 CA-EF20 5.2 78.0% 26.0 2.2 2.55 750 132S 1LA7 BALL 1LA7130-8AB60-Z A11 1320 CA-EF20 5.7 75.0% 38.0 3 3.45 3000 100L 1LA7 BALL 1LA7106-2AA10-Z A11 721 CA-EF20 6.1 84.0% 22.0 3 3.45 1500 100L 1LA7 BALL 1LA7107-4AA10-Z A11 728 CA-EF20 6.4 83.0% 24.0 3 3.45 1000 132S 1LA7 BALL 1LA7130-6AA60-Z A11 1068 CA-EF20 7.2 79.0% 38.0 3 3.45 750 132M 1LA7 BALL 1LA7133-8AB60-Z A11 1580 CA-EF20 7.6 77.0% 44.0 4 4.6 3000 112M 1LA7 BALL 1LA7113-2AA60-Z A11 865 CA-EF20 7.8 86.0% 29.0 4 4.6 1500 112M 1LA7 BALL 1LA7113-4AA60-Z A11 899 CA-EF20 8.2 85.0% 31.0 4 4.6 1000 132M 1LA7 BALL 1LA7133-6AA60-Z A11 1290 CA-EF20 9.4 80.5% 44.0 4 4.6 750 160M 1LA7 BALL 1LA7163-8AB60-Z A11 1900 CA-EF20 10 80.0% 64.0 5.5 6.3 3000 132S 1LA7 BALL 1LA7130-2AA60-Z A11 1134 CA-EF20 10.4 86.5% 39.0 5.5 6.3 1500 132S 1LA7 BALL 1LA7130-4AA60-Z A11 1170 CA-EF20 11.4 86.0% 41.0 5.5 6.3 1000 132M 1LA7 BALL 1LA7134-6AA60-Z A11 1600 CA-EF20 12.6 83.0% 52.0 5.5 6.3 750 160M 1LA7 BALL 1LA7164-8AB60-Z A11 2330 CA-EF20 13 83.5% 74.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model

IEC - TEFCs 1LA7 - Foot Mounted and PTC (1x Phase) kw 50Hz kw 60Hz RPM Frame Type DE Bearing Part Number List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz 7.5 8.6 3000 132S 1LA7 BALL 1LA7131-2AA60-Z A11 1410 CA-EF20 13.8 88.0% 48.0 7.5 8.6 1500 132M 1LA7 BALL 1LA7133-4AA60-Z A11 1460 CA-EF20 15.2 87.0% 49.0 7.5 8.6 1000 160M 1LA7 BALL 1LA7163-6AA60-Z A11 2030 CA-EF20 17 86.0% 74.0 7.5 8.6 750 160L 1LA7 BALL 1LA7166-8AB60-Z A11 2840 CA-EF20 17.6 85.5% 94.0 11 12.6 3000 160M 1LA7 BALL 1LA7163-2AA60-Z A11 1900 CA-EF20 20 89.5% 68.0 11 12.6 1500 160M 1LA7 BALL 1LA7163-4AA60-Z A11 1940 CA-EF20 21.5 88.5% 73.0 11 12.6 1000 160L 1LA7 BALL 1LA7166-6AA60-Z A11 2750 CA-EF20 24.5 87.5% 95.0 15 17.3 3000 160M 1LA7 BALL 1LA7164-2AA60-Z A11 2440 CA-EF20 26.5 90.0% 77.0 15 17.3 1500 160L 1LA7 BALL 1LA7166-4AA60-Z A11 2470 CA-EF20 28.5 90.0% 85.0 18.5 21.3 3000 160L 1LA7 BALL 1LA7166-2AA60-Z A11 2880 CA-EF20 32 91.0% 86.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Weight (kg) Stock Model Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-5 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions IEC - TEFCs 1LA7 - B5 Flange, Footless (w/o canopy) kw 50Hz kw 60Hz RPM Frame Type DE Bearing Part Number 7-6 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz 0.06 0.07 1500 56M 1LA7 BALL 1LA7050-4AB11 241 CA-EF20 0.2 56.0% 3.0 0.09 0.1 3000 56M 1LA7 BALL 1LA7050-2AA11 241 CA-EF20 0.26 63.0% 3.0 0.09 0.1 1500 56M 1LA7 BALL 1LA7053-4AB11 242 CA-EF20 0.29 58.0% 3.0 0.09 0.1 1000 63M 1LA7 BALL 1LA7063-6AB11 262 CA-EF20 0.44 45.0% 4.1 0.09 0.1 750 71M 1LA7 BALL 1LA7070-8AB11 296 CA-EF20 0.36 53.0% 6.3 0.12 0.14 3000 56M 1LA7 BALL 1LA7053-2AA11 242 CA-EF20 0.32 65.0% 3.0 Weight (kg) 0.12 0.14 1500 63M 1LA7 BALL 1LA7060-4AB11 240 SA-EF20 0.42 55.0% 3.5 0.12 0.14 750 71M 1LA7 BALL 1LA7073-8AB11 328 CA-EF20 0.51 53.0% 6.3 0.18 0.21 3000 63M 1LA7 BALL 1LA7060-2AA11 242 CA-EF20 0.5 63.0% 3.5 0.18 0.21 1500 63M 1LA7 BALL 1LA7063-4AB11 255 SA-EF20 0.56 60.0% 4.1 0.18 0.21 1000 71M 1LA7 BALL 1LA7070-6AA11 275 CA-EF20 0.67 53.0% 5.0 0.18 0.21 750 80M 1LA7 BALL 1LA7080-8AB11 347 CA-EF20 0.75 51.0% 9.0 0.25 0.29 3000 63M 1LA7 BALL 1LA7063-2AA11 255 SA-EF20 0.68 65.0% 4.1 0.25 0.29 1500 71M 1LA7 BALL 1LA7070-4AB11 261 SA-EF20 0.77 60.0% 4.8 0.25 0.29 1000 71M 1LA7 BALL 1LA7073-6AA11 303 SA-EF20 0.79 60.0% 6.3 0.25 0.29 750 80M 1LA7 BALL 1LA7083-8AB11 418 CA-EF20 1.02 55.0% 10.0 0.37 0.43 3000 71M 1LA7 BALL 1LA7070-2AA11 265 CA-EF20 1 66.0% 5.0 0.37 0.43 1500 71M 1LA7 BALL 1LA7073-4AB11 287 SA-EF20 1.06 65.0% 6.0 0.37 0.43 1000 80M 1LA7 BALL 1LA7080-6AA11 330 SA-EF20 1.2 62.0% 9.0 0.37 0.43 750 90S 1LA7 BALL 1LA7090-8AB11 506 CA-EF20 1.14 63.0% 10.5 0.55 0.63 3000 71M 1LA7 BALL 1LA7073-2AA11 294 SA-EF20 1.36 71.0% 6.0 0.55 0.63 1500 80M 1LA7 BALL 1LA7080-4AA11 320 SA-EF20 1.46 67.0% 9.0 0.55 0.63 1000 80M 1LA7 BALL 1LA7083-6AA11 376 CA-EF20 1.6 67.0% 10.0 0.55 0.63 750 90L 1LA7 BALL 1LA7096-8AB11 604 CA-EF20 1.58 66.0% 13.2 0.75 0.86 3000 80M 1LA7 BALL 1LA7080-2AA11 330 CA-EF20 1.73 73.0% 9.0 0.75 0.86 1500 80M 1LA7 BALL 1LA7083-4AA11 343 CA-EF20 1.91 72.0% 10.0 0.75 0.86 1000 90S 1LA7 BALL 1LA7090-6AA11 438 CA-EF20 2.05 69.0% 12.5 0.75 0.86 750 100L 1LA7 BALL 1LA7106-8AB11 671 CA-EF20 2.15 66.0% 19.0 1.1 1.3 3000 80M 1LA7 BALL 1LA7083-2AA11 373 CA-EF20 2.4 77.0% 11.0 1.1 1.3 1500 90S 1LA7 BALL 1LA7090-4AA11 418 CA-EF20 2.55 77.0% 13.0 1.1 1.3 1000 90L 1LA7 BALL 1LA7096-6AA11 529 CA-EF20 2.85 72.0% 15.7 1.1 1.3 750 100L 1LA7 BALL 1LA7107-8AB11 832 CA-EF20 2.9 72.0% 22.0 1.5 1.75 3000 90S 1LA7 BALL 1LA7090-2AA11 443 CA-EF20 3.25 79.0% 12.9 1.5 1.75 1500 90L 1LA7 BALL 1LA7096-4AA11 486 CA-EF20 3.4 79.0% 15.6 1.5 1.75 1000 100L 1LA7 BALL 1LA7106-6AA11 648 CA-EF20 3.9 74.0% 21.0 1.5 1.75 750 112M 1LA7 BALL 1LA7113-8AB11 991 CA-EF20 3.85 74.0% 24.0 2.2 2.55 3000 90L 1LA7 BALL 1LA7096-2AA11 555 SA-EF20 4.55 82.0% 15.7 2.2 2.55 1500 100L 1LA7 BALL 1LA7106-4AA11 613 CA-EF20 4.7 82.0% 21.0 2.2 2.55 1000 112M 1LA7 BALL 1LA7113-6AA11 812 CA-EF20 5.2 78.0% 26.0 2.2 2.55 750 132S 1LA7 BALL 1LA7130-8AB11 1280 CA-EF20 5.7 75.0% 38.0 3 3.45 3000 100L 1LA7 BALL 1LA7106-2AA11 688 CA-EF20 6.1 84.0% 22.0 3 3.45 1500 100L 1LA7 BALL 1LA7107-4AA11 695 CA-EF20 6.4 83.0% 24.0 3 3.45 1000 132S 1LA7 BALL 1LA7130-6AA11 1028 CA-EF20 7.2 79.0% 38.0 3 3.45 750 132M 1LA7 BALL 1LA7133-8AB11 1540 CA-EF20 7.6 77.0% 44.0 4 4.6 3000 112M 1LA7 BALL 1LA7113-2AA11 849 CA-EF20 7.8 86.0% 29.0 4 4.6 1500 112M 1LA7 BALL 1LA7113-4AA11 883 CA-EF20 8.2 85.0% 31.0 4 4.6 1000 132M 1LA7 BALL 1LA7133-6AA11 1250 CA-EF20 9.4 80.5% 44.0 4 4.6 750 160M 1LA7 BALL 1LA7163-8AB11 1893 CA-EF20 10 80.0% 64.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model

EC - TEFCs 1LA7 - B5 Flange, Footless (w/o canopy) kw 50Hz kw 60Hz RPM Frame Type DE Bearing Part Number List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz 5.5 6.3 3000 132S 1LA7 BALL 1LA7130-2AA11 1094 CA-EF20 10.4 86.5% 39.0 5.5 6.3 1500 132S 1LA7 BALL 1LA7130-4AA11 1130 CA-EF20 11.4 86.0% 41.0 5.5 6.3 1000 132M 1LA7 BALL 1LA7134-6AA11 1560 CA-EF20 12.6 83.0% 52.0 5.5 6.3 750 160M 1LA7 BALL 1LA7164-8AB11 2323 CA-EF20 13 83.5% 74.0 7.5 8.6 3000 132S 1LA7 BALL 1LA7131-2AA11 1370 CA-EF20 13.8 88.0% 48.0 7.5 8.6 1500 132M 1LA7 BALL 1LA7133-4AA11 1420 CA-EF20 15.2 87.0% 49.0 7.5 8.6 1000 160M 1LA7 BALL 1LA7163-6AA11 2023 CA-EF20 17 86.0% 74.0 7.5 8.6 750 160L 1LA7 BALL 1LA7166-8AB11 2833 CA-EF20 17.6 85.5% 94.0 Weight (kg) 11 12.6 3000 160M 1LA7 BALL 1LA7163-2AA11 1893 SA-EF20 20 89.5% 68.0 11 12.6 1500 160M 1LA7 BALL 1LA7163-4AA11 1933 CA-EF20 21.5 88.5% 73.0 11 12.6 1000 160L 1LA7 BALL 1LA7166-6AA11 2743 CA-EF20 24.5 87.5% 95.0 15 17.3 3000 160M 1LA7 BALL 1LA7164-2AA11 2433 CA-EF20 26.5 90.0% 77.0 15 17.3 1500 160L 1LA7 BALL 1LA7166-4AA11 2463 CA-EF20 28.5 90.0% 85.0 18.5 21.3 3000 160L 1LA7 BALL 1LA7166-2AA11 2873 CA-EF20 32 91.0% 86.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-7 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions IEC - TEFCs 1LA7 -B14 Flange, Footless (w/o canopy) kw 50Hz kw 60Hz RPM Frame Type DE Bearing Part Number 7-8 2009-2010 Low Voltage AC Selection and Pricing Guide List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz 0.06 0.07 1500 56M 1LA7 BALL 1LA7050-4AB12 241 CA-EF20 0.2 56.0% 3.0 0.09 0.1 3000 56M 1LA7 BALL 1LA7050-2AA12 241 CA-EF20 0.26 63.0% 3.0 0.09 0.1 1500 56M 1LA7 BALL 1LA7053-4AB12 242 CA-EF20 0.29 58.0% 3.0 0.09 0.1 1000 63M 1LA7 BALL 1LA7063-6AB12 262 CA-EF20 0.44 45.0% 4.1 0.09 0.1 750 71M 1LA7 BALL 1LA7070-8AB12 296 CA-EF20 0.36 53.0% 6.3 0.12 0.14 3000 56M 1LA7 BALL 1LA7053-2AA12 242 CA-EF20 0.32 65.0% 3.0 Weight (kg) 0.12 0.14 1500 63M 1LA7 BALL 1LA7060-4AB12 240 SA-EF20 0.42 55.0% 3.5 0.12 0.14 750 71M 1LA7 BALL 1LA7073-8AB12 328 CA-EF20 0.51 53.0% 6.3 0.18 0.21 3000 63M 1LA7 BALL 1LA7060-2AA12 242 SA-EF20 0.5 63.0% 3.5 0.18 0.21 1500 63M 1LA7 BALL 1LA7063-4AB12 255 SA-EF20 0.56 60.0% 4.1 0.18 0.21 1000 71M 1LA7 BALL 1LA7070-6AA12 275 CA-EF20 0.67 53.0% 5.0 0.18 0.21 750 80M 1LA7 BALL 1LA7080-8AB12 347 CA-EF20 0.75 51.0% 9.0 0.25 0.29 3000 63M 1LA7 BALL 1LA7063-2AA12 255 CA-EF20 0.68 65.0% 4.1 0.25 0.29 1500 71M 1LA7 BALL 1LA7070-4AB12 261 SA-EF20 0.77 60.0% 4.8 0.25 0.29 1000 71M 1LA7 BALL 1LA7073-6AA12 303 SA-EF20 0.79 60.0% 6.3 0.25 0.29 750 80M 1LA7 BALL 1LA7083-8AB12 418 CA-EF20 1.02 55.0% 10.0 0.37 0.43 3000 71M 1LA7 BALL 1LA7070-2AA12 265 SA-EF20 1 66.0% 5.0 0.37 0.43 1500 71M 1LA7 BALL 1LA7073-4AB12 287 SA-EF20 1.06 65.0% 6.0 0.37 0.43 1000 80M 1LA7 BALL 1LA7080-6AA12 330 SA-EF20 1.2 62.0% 9.0 0.37 0.43 750 90S 1LA7 BALL 1LA7090-8AB12 506 CA-EF20 1.14 63.0% 10.5 0.55 0.63 3000 71M 1LA7 BALL 1LA7073-2AA12 294 SA-EF20 1.36 71.0% 6.0 0.55 0.63 1500 80M 1LA7 BALL 1LA7080-4AA12 320 SA-EF20 1.46 67.0% 9.0 0.55 0.63 1000 80M 1LA7 BALL 1LA7083-6AA12 376 SA-EF20 1.6 67.0% 10.0 0.55 0.63 750 90L 1LA7 BALL 1LA7096-8AB12 604 CA-EF20 1.58 66.0% 13.2 0.75 0.86 3000 80M 1LA7 BALL 1LA7080-2AA12 330 CA-EF20 1.73 73.0% 9.0 0.75 0.86 1500 80M 1LA7 BALL 1LA7083-4AA12 343 SA-EF20 1.91 72.0% 10.0 0.75 0.86 1000 90S 1LA7 BALL 1LA7090-6AA12 438 CA-EF20 2.05 69.0% 12.5 0.75 0.86 750 100L 1LA7 BALL 1LA7106-8AB12 671 CA-EF20 2.15 66.0% 19.0 1.1 1.3 3000 80M 1LA7 BALL 1LA7083-2AA12 373 CA-EF20 2.4 77.0% 11.0 1.1 1.3 1500 90S 1LA7 BALL 1LA7090-4AA12 418 CA-EF20 2.55 77.0% 13.0 1.1 1.3 1000 90L 1LA7 BALL 1LA7096-6AA12 529 CA-EF20 2.85 72.0% 15.7 1.1 1.3 750 100L 1LA7 BALL 1LA7107-8AB12 832 CA-EF20 2.9 72.0% 22.0 1.5 1.75 3000 90S 1LA7 BALL 1LA7090-2AA12 443 CA-EF20 3.25 79.0% 12.9 1.5 1.75 1500 90L 1LA7 BALL 1LA7096-4AA12 486 SA-EF20 3.4 79.0% 15.6 1.5 1.75 1000 100L 1LA7 BALL 1LA7106-6AA12 648 CA-EF20 3.9 74.0% 21.0 1.5 1.75 750 112M 1LA7 BALL 1LA7113-8AB12 918 CA-EF20 3.85 74.0% 24.0 2.2 2.55 3000 90L 1LA7 BALL 1LA7096-2AA12 555 CA-EF20 4.55 82.0% 15.7 2.2 2.55 1500 100L 1LA7 BALL 1LA7106-4AA12 613 CA-EF20 4.7 82.0% 21.0 2.2 2.55 1000 112M 1LA7 BALL 1LA7113-6AA12 812 CA-EF20 5.2 78.0% 26.0 2.2 2.55 750 132S 1LA7 BALL 1LA7130-8AB12 1280 CA-EF20 5.7 75.0% 38.0 3 3.45 3000 100L 1LA7 BALL 1LA7106-2AA12 688 CA-EF20 6.1 84.0% 22.0 3 3.45 1500 100L 1LA7 BALL 1LA7107-4AA12 695 CA-EF20 6.4 83.0% 24.0 3 3.45 1000 132S 1LA7 BALL 1LA7130-6AA12 1028 CA-EF20 7.2 79.0% 38.0 3 3.45 750 132M 1LA7 BALL 1LA7133-8AB12 1540 CA-EF20 7.6 77.0% 44.0 4 4.6 3000 112M 1LA7 BALL 1LA7113-2AA12 849 CA-EF20 7.8 86.0% 29.0 4 4.6 1500 112M 1LA7 BALL 1LA7113-4AA12 883 CA-EF20 8.2 85.0% 31.0 4 4.6 1000 132M 1LA7 BALL 1LA7133-6AA12 1250 CA-EF20 9.4 80.5% 44.0 4 4.6 750 160M 1LA7 BALL 1LA7163-8AB12 1893 CA-EF20 10 80.0% 64.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model

IEC - TEFCs 1LA7 -B14 Flange, Footless (w/o canopy) kw 50Hz kw 60Hz RPM Frame Type DE Bearing Part Number List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz 5.5 6.3 3000 132S 1LA7 BALL 1LA7130-2AA12 1094 CA-EF20 10.4 86.5% 39.0 5.5 6.3 1500 132S 1LA7 BALL 1LA7130-4AA12 1130 CA-EF20 11.4 86.0% 41.0 5.5 6.3 1000 132M 1LA7 BALL 1LA7134-6AA12 1560 CA-EF20 12.6 83.0% 52.0 5.5 6.3 750 160M 1LA7 BALL 1LA7164-8AB12 2323 CA-EF20 13 83.5% 74.0 7.5 8.6 3000 132S 1LA7 BALL 1LA7131-2AA12 1370 CA-EF20 13.8 88.0% 48.0 7.5 8.6 1500 132M 1LA7 BALL 1LA7133-4AA12 1420 CA-EF20 15.2 87.0% 49.0 7.5 8.6 1000 160M 1LA7 BALL 1LA7163-6AA12 2023 CA-EF20 17 86.0% 74.0 7.5 8.6 750 160L 1LA7 BALL 1LA7166-8AB12 2833 CA-EF20 17.6 85.5% 94.0 11 12.6 3000 160M 1LA7 BALL 1LA7163-2AA12 1893 CA-EF20 20 89.5% 68.0 11 12.6 1500 160M 1LA7 BALL 1LA7163-4AA12 1933 CA-EF20 21.5 88.5% 73.0 11 12.6 1000 160L 1LA7 BALL 1LA7166-6AA12 2743 CA-EF20 24.5 87.5% 95.0 15 17.3 3000 160M 1LA7 BALL 1LA7164-2AA12 2433 CA-EF20 26.5 90.0% 77.0 15 17.3 1500 160L 1LA7 BALL 1LA7166-4AA12 2463 CA-EF20 28.5 90.0% 85.0 18.5 21.3 3000 160L 1LA7 BALL 1LA7166-2AA12 2873 CA-EF20 32 91.0% 86.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Weight (kg) Stock Model Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-9 Dimensions

Introduction IEC - TEFCs 1LA6 - Foot Mounted Standard Efficiency General Purpose Duty Duty Purpose The 1LA6 motors, with their wide variety of options, fit in every drive system concept and cover more than 90% of all imaginable worldwide. They are suitable for indoor and outdoor applications where excellent price/performance ratio and high degree of operational reliability in severe operating atmospheres are required. This powerful energy-saving motor is less harmful to the environment thanks to reduction in CO2 emission. These industry workhorses are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/chemical applications. Specifications 0.75W to 18.5kW Dual Frequency rated 3000, 1500, 1000 RPM - 50 Hz 3600, 1800, 1200 RPM - 60 Hz 3 phase, 50 Hz; 230VD/400VY and 60 Hz 460VY 3 phase, 50 Hz; 400VD/690VY and 60 Hz 460VD All commonly used voltages (50 Hz and 60 Hz) available EU/CEMEP efficiency classification EFF2 (Improved efficiency) Class F insulation, Class B temperature rise Continuous Duty, Suitable for Converted fed operation CE Marked, IEC 60034 NEMA MG1-12 available UL and CSA label marks available 100 through 160 frame Features for Long Life Frame & End Shields Cast Iron construction for high degree of operational reliability in aggressive atmospheres. All motors are designed for IP55 (IEC 529), suitable for use in dusty or damp surroundings, ready for their use in the tropics. (IP56 and IP65 available) Rotor A unique offset laminated rotor core design provides improved efficiency while larger bars and Aluminum end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced (IEC 60034-14) for extended bearing life. Stator/Windings Manufactured with premium electrical grade steel laminations and the finest copper electrical magnet wire for lower losses and improved efficiencies. A unique stator core design lowers flux density and increases cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation DURIGNIT IR 2000, inverter-compatible up to 500 V, optionally up to 690 V. This insulation system comprised of high-grade enameled wires and insulating sheet materials combine with solvent-free impregnating resin. The system ensures a high level of mechanical and electrical strength as well as good serviceability and long motor life. The insulation offers general protection for the windings against corrosive gases, vapors, dust, oil and increased humidity, and resists the normal stresses of vibration. Cooling are fitted with a radial-flow fan which functions independently of the direction of rotation (cooling method IC 411 to DIN EN 60034-6). The material of the external cooling fans is reinforced plastic. This material is tested and certified for a 20 year lifetime. Fan cowls are made of corrosion protected steel plate. Bearings The bearing nominal life is specified by standard calculation (DIN ISO 281) and is achieved or exceeds by 90% if used according to instructions, if the operating conditions are below average a bearing life of 100,000 (Lh10 hours) can be achieved. Lubrication The grease life, for pre-lubricated motors, is tailored to the bearing life. In those cases where re-lubrication is chosen, the motors are provided with a grease retaining system that prevents grease from entering the motor. Siemens IEC motors use a lithium based grease. Conduit Box Cast Iron-construction, top mounted as standard, the terminal box can be ordered to either side of the motor or be rotated 90º or 180º, providing a more flexible mounting. In addition to the standard terminal box earthing, an external earthing is also made available for all motors upon request. Corrosion Resistance Zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion. (Stainless steel hardware also available) Flexible All Siemens IEC motors are available with a wide variety of options to meet your specific motor needs. Dimensions Specifications table begins on the next page 7-10 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFCs 1LA6 - Foot Mounted kw 50Hz kw 60Hz RPM Frame Type DE Bearing Part Number List Price $ Mult. Symb. FL Amps 50Hz Standard Efficiency FL Nom. Eff. 50Hz 0.75 0.86 750 100L 1LA6 BALL 1LA6106-8AB60 689 CA-EF22 2.15 66.0% 29.0 1.1 1.3 750 100L 1LA6 BALL 1LA6107-8AB60 875 CA-EF22 2.9 72.0% 32.0 1.5 1.75 1000 100L 1LA6 BALL 1LA6106-6AA60 665 CA-EF22 3.9 74.0% 33.0 1.5 1.75 750 112M 1LA6 BALL 1LA6113-8AB60 1050 CA-EF22 3.85 74.0% 39.0 2.2 2.55 1500 100L 1LA6 BALL 1LA6106-4AA60 624 CA-EF22 4.7 82.0% 33.0 2.2 2.55 1000 112M 1LA6 BALL 1LA6113-6AA60 830 CA-EF22 5.2 78.0% 40.0 2.2 2.55 750 132S 1LA6 BALL 1LA6130-8AB60 1320 CA-EF22 5.7 75.0% 50.0 3 3.45 3000 100L 1LA6 BALL 1LA6106-2AA60 712 CA-EF22 6.1 84.0% 34.0 3 3.45 1500 100L 1LA6 BALL 1LA6107-4AA60 719 CA-EF22 6.4 83.0% 36.0 3 3.45 1000 132S 1LA6 BALL 1LA6130-6AA60 1040 CA-EF22 7.2 79.0% 50.0 3 3.45 750 132M 1LA6 BALL 1LA6133-8AB60 1590 CA-EF22 7.6 77.0% 57.0 4 4.6 3000 112M 1LA6 BALL 1LA6113-2AA60 875 CA-EF22 7.8 86.0% 43.0 4 4.6 1500 112M 1LA6 BALL 1LA6113-4AA60 919 CA-EF22 8.2 85.0% 45.0 4 4.6 1000 132M 1LA6 BALL 1LA6133-6AA60 1280 CA-EF22 9.4 80.5% 57.0 4 4.6 750 160M 1LA6 BALL 1LA6163-8AB60 1880 CA-EF22 10 80.0% 91.0 5.5 6.3 3000 132S 1LA6 BALL 1LA6130-2AA60 1090 CA-EF22 10.4 86.5% 53.0 5.5 6.3 1500 132S 1LA6 BALL 1LA6130-4AA60 1140 CA-EF22 11.4 86.0% 55.0 5.5 6.3 1000 132M 1LA6 BALL 1LA6134-6AA60 1620 CA-EF22 12.6 83.0% 66.0 Weight (kg) 5.5 6.3 750 160M 1LA6 BALL 1LA6164-8AB60 2370 CA-EF22 13 83.5% 102.0 7.5 8.6 3000 132S 1LA6 BALL 1LA6131-2AA60 1410 CA-EF22 13.8 88.0% 58.0 7.5 8.6 1500 132M 1LA6 BALL 1LA6133-4AA60 1450 CA-EF22 15.2 87.0% 62.0 7.5 8.6 1000 160M 1LA6 BALL 1LA6163-6AA60 2060 CA-EF22 17 86.0% 103.0 7.5 8.6 750 160L 1LA6 BALL 1LA6166-8AB60 2960 CA-EF22 17.6 85.5% 122.0 11 12.6 3000 160M 1LA6 BALL 1LA6163-2AA60 1880 CA-EF22 20 89.5% 96.0 11 12.6 1500 160M 1LA6 BALL 1LA6163-4AA60 1960 CA-EF22 21.5 88.5% 100.0 11 12.6 1000 160L 1LA6 BALL 1LA6166-6AA60 2840 CA-EF22 24.5 87.5% 122.0 15 17.3 3000 160M 1LA6 BALL 1LA6164-2AA60 2490 CA-EF22 26.5 90.0% 105.0 15 17.3 1500 160L 1LA6 BALL 1LA6166-4AA60 2540 CA-EF22 28.5 90.0% 114.0 18.5 21.3 3000 160L 1LA6 BALL 1LA6166-2AA60 2980 CA-EF22 32 91.0% 115.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-11 Dimensions

Introduction IEC - TEFCs 1LA9 High Efficiency General Purpose Duty Duty The 1LA9 motors, with their wide variety of options, fit in every drive system concept and cover more than 90% of all imaginable applications worldwide, suitable for indoor and outdoor applications where light weight and excellent price/performance ratio and high degree of operational reliability are required. This powerful energy-saving motor is less harmful to the environment thanks to reduction in CO 2 emission. Specifications 90W to 18.5kW 1.15 Service Factor, 40º C ambient Dual Frequency rated 3000, 1500, 1000 RPM - 50 Hz 3600, 1800, 1200 RPM - 60 Hz 3 phase, 50 Hz, 230VD/400VY and 60 Hz, 460VY 3 phase, 50 Hz, 400VD/690VY and 60 Hz, 460VD Special voltages (50 Hz and 60 Hz) available Meets or exceeds EPAct efficiency standards (CC 032A) Class F insulation, Class B temperature rise Continuous Duty, Suitable for Converted fed operation CE Marked, IEC 60034 NEMA MG1-12 available UL and CSA label marks available 56 through 160 frame Features for Long Life Frame & End Shields Cast aluminum construction for exceptional heat dissipation and structural integrity. All motors are designed with degree of protection IP55 (IEC 529), suitable for use in dusty or damp surroundings, ready for their use in the tropics. (IP56 and IP65 available) Rotor A unique offset laminated rotor core design provides improved efficiency while larger bars and Aluminum end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced (IEC 60034-14) for extended bearing life. Stator/Windings Manufactured with premium electrical grade steel laminations and the finest copper electrical magnet wire for lower losses and improved efficiencies. A unique stator core design lowers flux density and increases cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation DURIGNIT IR 2000, inverter-compatible up to 500 V, optionally up to 690 V. This insulation system comprised of high-grade enameled wires and insulating sheet materials combine with solvent-free impregnating resin. The system ensures a high level of mechanical and electrical strength as well as good serviceability and long motor life. The insulation offers general protection for the windings against corrosive gases, vapors, dust, oil and increased humidity, and resists the normal stresses of vibration. Cooling are fitted with a radial flow fan which functions independently of the direction of rotation (cooling method IC 411 to DIN EN 60034-6). The material of the external cooling fans is reinforced plastic. This material is tested and certified for a 20 year lifetime. Fan cowls are made of corrosion protected steel plate. Bearings The bearing nominal life is specified by standard calculation (DIN ISO 281) and is achieved or exceeds by 90% if used according to instructions, if the operating conditions are below average a bearing life of 100,000 (Lh10 hours) can be achieved. Lubrication The grease life, for pre-lubricated motors, is tailored to the bearing life. In those cases where re-lubrication is chosen, the motors are provided with a grease retaining system that prevents grease from entering the motor. Siemens IEC motors use a lithium based grease Conduit Box Cast aluminumconstruction, top mounted as standard, the terminal box can be ordered to either side of the motor or be rotated 90º or 180º (frames size 80 and above), providing a more flexible mounting. In addition to the standard terminal box earthing, an external earthing is also made available for all motors. Corrosion Resistance Zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion. (Stainless steel hardware also available) Flexible All Siemens IEC motors are available with a wide variety of options to meet your specific motor needs. Specifications table begins on the next page Dimensions Purpose 7-12 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFCs 1LA9 - Foot Mounted kw 50Hz Power HP 60Hz 50Hz RPM 60Hz Frame Type DE Bearing List Price $ Mult. Symb. FL Current High Efficiency FL Nom. Eff. 0.06 0.08 1500 1800 56M 1LA9 BALL 1LA9050-4KA10 286 CA-EF10 0.22 0.18 61.0% 63.0% 3.0 0.09 0.12 3000 3600 56M 1LA9 BALL 1LA9050-2KA10 275 CA-EF10 0.24 0.22 68.0% 70.0% 3.0 0.09 0.12 1500 1800 56M 1LA9 BALL 1LA9053-4KA10 287 CA-EF10 0.31 0.26 62.0% 64.0% 3.8 0.12 0.16 3000 3600 56M 1LA9 BALL 1LA9053-2KA10 277 CA-EF10 0.31 0.28 69.0% 71.0% 3.8 0.12 0.16 1500 1800 63M 1LA9 BALL 1LA9060-4KA10 291 CA-EF10 0.41 0.34 66.0% 69.0% 4.1 0.18 0.25 3000 3600 63M 1LA9 BALL 1LA9060-2KA10 285 CA-EF10 0.48 0.43 70.0% 71.0% 4.1 0.18 0.25 1500 1800 63M 1LA9 BALL 1LA9063-4KA10 314 CA-EF10 0.62 0.54 62.0% 65.0% 5.1 0.25 0.33 3000 3600 63M 1LA9 BALL 1LA9063-2KA10 302 CA-EF10 0.63 0.52 70.0% 72.0% 5.1 0.25 0.33 1500 1800 71M 1LA9 BALL 1LA9070-4KA10 318 CA-EF10 0.81 0.75 70.0% 69.0% 6.0 0.37 0.5 3000 3600 71M 1LA9 BALL 1LA9070-2KA10 310 CA-EF10 0.94 0.87 74.0% 72.0% 6.0 0.37 0.5 1500 1800 71M 1LA9 BALL 1LA9073-4KA10 356 CA-EF10 1.03 0.98 71.0% 70.0% 7.2 0.55 0.75 3000 3600 71M 1LA9 BALL 1LA9073-2KA10 351 CA-EF10 1.42 1.32 75.0% 73.0% 7.2 0.55 0.75 1500 1800 80M 1LA9 BALL 1LA9080-4KA10 395 CA-EF10 1.32 1.26 77.0% 75.5% 9.8 0.75 1 3000 3600 80M 1LA9 BALL 1LA9080-2KA10 397 CA-EF10 1.65 1.52 80.0% 75.5% 9.8 400v 50Hz 460v 60Hz 400v 50Hz 460v 60Hz 2009-2010 Low Voltage AC Selection and Pricing Guide Weight (kg) 0.75 1 1500 1800 80M 1LA9 BALL 1LA9083-4KA10 430 SA-EF10 1.80 1.58 81.0% 82.5% 12.3 0.75 1 1000 1200 90S 1LA9 BALL 1LA9090-6KA10 515 SA-EF10 2.00 1.78 75.5% 80.0% 15.7 1.1 1.5 3000 3600 80M 1LA9 BALL 1LA9083-2KA10 455 SA-EF10 2.15 1.94 84.0% 82.5% 12.3 1.1 1.5 1500 1800 90S 1LA9 BALL 1LA9090-4KA10 525 SA-EF10 2.45 2.20 84.0% 84.0% 15.0 1.1 1.5 1000 1200 90L 1LA9 BALL 1LA9096-6KA10 637 SA-EF10 2.80 2.55 82.0% 85.5% 19.0 1.5 2 3000 3600 90S 1LA9 BALL 1LA9090-2KA10 541 SA-EF10 2.95 2.60 85.0% 84.0% 15.0 1.5 2 1500 1800 90L 1LA9 BALL 1LA9096-4KA10 623 SA-EF10 3.30 2.95 85.0% 84.0% 18.0 1.5 2 1000 1200 100L 1LA9 BALL 1LA9106-6KA10 754 CA-EF10 3.65 3.20 85.0% 86.5% 25.0 2.2 3 3000 3600 90L 1LA9 BALL 1LA9096-2KA10 697 SA-EF10 4.25 3.85 86.5% 85.5% 18.6 2.2 3 1500 1800 100L 1LA9 BALL 1LA9106-4KA10 763 SA-EF10 4.55 4.05 86.5% 87.5% 25.0 2.2 3 1000 1200 112M 1LA9 BALL 1LA9113-6KA60 945 SA-EF10 5.40 4.85 84.0% 87.5% 37.0 3 4 3000 3600 100L 1LA9 BALL 1LA9106-2KA10 837 CA-EF10 5.70 4.95 87.0% 86.5% 24.0 3 4 1500 1800 100L 1LA9 BALL 1LA9107-4KA10 878 CA-EF10 6.10 5.40 87.5% 87.5% 30.0 4 5 3000 3600 112M 1LA9 BALL 1LA9113-2KA60 993 SA-EF10 7.40 6.10 88.5% 87.5% 35.0 4 5 1500 1800 112M 1LA9 BALL 1LA9113-4KA60 1080 SA-EF10 8.10 6.80 88.5% 87.5% 37.0 4 5 1000 1200 132M 1LA9 BALL 1LA9133-6KA60 1480 CA-EF10 8.50 6.90 84.0% 87.5% 49.0 5.5 7.5 3000 3600 132S 1LA9 BALL 1LA9130-2KA60 1250 SA-EF10 9.90 8.80 89.5% 88.5% 43.0 5.5 7.5 1500 1800 132S 1LA9 BALL 1LA9130-4KA60 1340 SA-EF10 10.6 9.7 89.5% 89.5% 45.0 5.5 7.5 1000 1200 132M 1LA9 BALL 1LA9134-6KA60 1860 CA-EF10 12.0 10.8 86.0% 89.5% 64.0 7.5 10 3000 3600 132S 1LA9 BALL 1LA9131-2KA60 1580 SA-EF10 13.0 11.4 90.5% 89.5% 56.0 7.5 10 1500 1800 132M 1LA9 BALL 1LA9133-4KA60 1700 SA-EF10 14.3 12.8 90.3% 89.5% 60.0 7.5 10 1000 1200 160M 1LA9 BALL 1LA9163-6KA60 2350 CA-EF10 17.1 15.0 88.0% 89.5% 98.0 11 15 3000 3600 160M 1LA9 BALL 1LA9163-2KA60 2190 SA-EF10 19.4 17.2 91.0% 90.2% 73.0 11 15 1500 1800 160M 1LA9 BALL 1LA9163-4KA60 2240 SA-EF10 20.5 18.2 91.5% 91.0% 81.0 11 15 1000 1200 160L 1LA9 BALL 1LA9166-6KA60 3250 CA-EF10 23.0 20.0 88.5% 90.2% 105.0 15 20 3000 3600 160M 1LA9 BALL 1LA9164-2KA60 2860 SA-EF10 26.3 23.0 91.5% 90.2% 82.0 15 20 1500 1800 160L 1LA9 BALL 1LA9166-4KA60 2900 SA-EF10 27.5 24.0 92.0% 91.0% 107.0 18.5 25 3000 3600 160L 1LA9 BALL 1LA9166-2KA60 3410 SA-EF10 31.5 28.0 92.3% 91.0% 102.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model 7-13 Introduction General Purpose Duty Duty Purpose Dimensions

IEC - TEFCs Introduction 1LA9 - Foot Mounted and PTC (1x Phase) High Efficiency General Purpose kw 50Hz Power HP 60Hz RPM 50Hz 60Hz Frame Type DE Bearing List Price $ Mult. Symb. FL Current 400v 50Hz 460v 60Hz FL Nom. Eff. 400v 50Hz 460v 60Hz Weight (kg) Stock Model Duty 0.06 0.08 1500 1800 56M 1LA9 BALL 1LA9050-4KA10-Z A11 362 CA-EF10 0.22 0.18 61.0% 63.0 3.0 0.09 0.12 3000 3600 56M 1LA9 BALL 1LA9050-2KA10-Z A11 351 CA-EF10 0.24 0.22 68.0% 70.0% 3.0 0.09 0.12 1500 1800 56M 1LA9 BALL 1LA9053-4KA10-Z A11 363 CA-EF10 0.31 0.26 62.0% 64.0% 3.8 0.12 0.16 3000 3600 56M 1LA9 BALL 1LA9053-2KA10-Z A11 353 CA-EF10 0.31 0.28 69.0% 71.0% 3.8 0.12 0.16 1500 1800 63M 1LA9 BALL 1LA9060-4KA10-Z A11 367 CA-EF10 0.41 0.34 66.0% 69.0% 4.1 0.18 0.25 3000 3600 63M 1LA9 BALL 1LA9060-2KA10-Z A11 361 CA-EF10 0.48 0.43 70.0% 71.0% 4.1 0.18 0.25 1500 1800 63M 1LA9 BALL 1LA9063-4KA10-Z A11 390 CA-EF10 0.62 0.54 62.0% 65.0% 5.1 0.25 0.33 3000 3600 63M 1LA9 BALL 1LA9063-2KA10-Z A11 378 CA-EF10 0.63 0.52 70.0% 72.0% 5.1 0.25 0.33 1500 1800 71M 1LA9 BALL 1LA9070-4KA10-Z A11 394 CA-EF10 0.81 0.75 70.0% 69.0% 6.0 0.37 0.5 3000 3600 71M 1LA9 BALL 1LA9070-2KA10-Z A11 386 CA-EF10 0.94 0.87 74.0% 72.0% 6.0 0.37 0.5 1500 1800 71M 1LA9 BALL 1LA9073-4KA10-Z A11 432 CA-EF10 1.03 0.98 71.0% 70.0% 7.2 0.55 0.75 3000 3600 71M 1LA9 BALL 1LA9073-2KA10-Z A11 427 CA-EF10 1.42 1.32 75.0% 73.0% 7.2 0.55 0.75 1500 1800 80M 1LA9 BALL 1LA9080-4KA10-Z A11 483 CA-EF10 1.32 1.26 77.0% 75.5% 9.8 0.75 1 3000 3600 80M 1LA9 BALL 1LA9080-2KA10-Z A11 485 CA-EF10 1.65 1.52 80.0% 75.5% 9.8 0.75 1 1500 1800 80M 1LA9 BALL 1LA9083-4KA10-Z A11 518 SA-EF10 1.80 1.58 81.0% 82.5% 12.3 0.75 1 1000 1200 90S 1LA9 BALL 1LA9090-6KA10-Z A11 603 CA-EF10 2.00 1.78 75.5% 80.0% 15.7 1.1 1.5 3000 3600 80M 1LA9 BALL 1LA9083-2KA10-Z A11 543 CA-EF10 2.15 1.94 84.0% 82.5% 12.3 1.1 1.5 1500 1800 90S 1LA9 BALL 1LA9090-4KA10-Z A11 613 CA-EF10 2.45 2.20 84.0% 84.0% 15.0 1.1 1.5 1000 1200 90L 1LA9 BALL 1LA9096-6KA10-Z A11 725 CA-EF10 2.80 2.55 82.0% 85.5% 19.0 1.5 2 3000 3600 90S 1LA9 BALL 1LA9090-2KA10-Z A11 629 CA-EF10 2.95 2.60 85.0% 84.0% 15.0 1.5 2 1500 1800 90L 1LA9 BALL 1LA9096-4KA10-Z A11 711 CA-EF10 3.30 2.95 85.0% 84.0% 18.0 1.5 2 1000 1200 100L 1LA9 BALL 1LA9106-6KA10-Z A11 855 CA-EF10 3.65 3.20 85.0% 86.5% 25.0 2.2 3 3000 3600 90L 1LA9 BALL 1LA9096-2KA10-Z A11 785 SA-EF10 4.25 3.85 86.5% 85.5% 18.6 2.2 3 1500 1800 100L 1LA9 BALL 1LA9106-4KA10-Z A11 864 CA-EF10 4.55 4.05 86.5% 87.5% 25.0 2.2 3 1000 1200 112M 1LA9 BALL 1LA9113-6KA60-Z A11 1046 CA-EF10 5.40 4.85 84.0% 87.5% 37.0 3 4 3000 3600 100L 1LA9 BALL 1LA9106-2KA10-Z A11 938 CA-EF10 5.70 4.95 87.0% 86.5% 24.0 3 4 1500 1800 100L 1LA9 BALL 1LA9107-4KA10-Z A11 979 CA-EF10 6.10 5.40 87.5% 87.5% 30.0 4 5 3000 3600 112M 1LA9 BALL 1LA9113-2KA60-Z A11 1094 SA-EF10 7.40 6.10 88.5% 87.5% 35.0 4 5 1500 1800 112M 1LA9 BALL 1LA9113-4KA60-Z A11 1181 SA-EF10 8.10 6.80 88.5% 87.5% 37.0 4 5 1000 1200 132M 1LA9 BALL 1LA9133-6KA60-Z A11 1630 CA-EF10 8.50 6.90 84.0% 87.5% 49.0 5.5 7.5 3000 3600 132S 1LA9 BALL 1LA9130-2KA60-Z A11 1400 SA-EF10 9.90 8.80 89.5% 88.5% 43.0 5.5 7.5 1500 1800 132S 1LA9 BALL 1LA9130-4KA60-Z A11 1490 SA-EF10 10.6 9.7 89.5% 89.5% 45.0 5.5 7.5 1000 1200 132M 1LA9 BALL 1LA9134-6KA60-Z A11 2010 CA-EF10 12.0 10.8 86.0% 89.5% 64.0 7.5 10 3000 3600 132S 1LA9 BALL 1LA9131-2KA60-Z A11 1730 SA-EF10 13.0 11.4 90.5% 89.5% 56.0 7.5 10 1500 1800 132M 1LA9 BALL 1LA9133-4KA60-Z A11 1850 CA-EF10 14.3 12.8 90.3% 89.5% 60.0 7.5 10 1000 1200 160M 1LA9 BALL 1LA9163-6KA60-Z A11 2500 CA-EF10 17.1 15.0 88.0% 89.5% 98.0 11 15 3000 3600 160M 1LA9 BALL 1LA9163-2KA60-Z A11 2340 SA-EF10 19.4 17.2 91.0% 90.2% 73.0 11 15 1500 1800 160M 1LA9 BALL 1LA9163-4KA60-Z A11 2390 SA-EF10 20.5 18.2 91.5% 91.0% 81.0 11 15 1000 1200 160L 1LA9 BALL 1LA9166-6KA60-Z A11 3400 CA-EF10 23.0 20.0 88.5% 90.2% 105.0 15 20 3000 3600 160M 1LA9 BALL 1LA9164-2KA60-Z A11 3010 CA-EF10 26.3 23.0 91.5% 90.2% 82.0 15 20 1500 1800 160L 1LA9 BALL 1LA9166-4KA60-Z A11 3050 SA-EF10 27.5 24.0 92.0% 91.0% 107.0 18.5 25 3000 3600 160L 1LA9 BALL 1LA9166-2KA60-Z A11 3560 CA-EF10 31.5 28.0 92.3% 91.0% 102.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Dimensions Duty Purpose 7-14 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFCs 1LA9 - B5 Flange, Footless (w/o canopy) Power kw 50Hz HP 60Hz RPM 50Hz 60Hz Frame Type DE Bearing List Price $ Mult. Symb. FL Current 400v 50Hz 460v 60Hz FL Nom. Eff. 400v 50Hz High Efficiency 460v 60Hz Weight (kg) Stock Model Introduction General Purpose 0.06 0.08 1500 1800 56M 1LA9 BALL 1LA9050-4KA11 323 CA-EF10 0.22 0.18 61.0% 63.0 3.0 0.09 0.12 3000 3600 56M 1LA9 BALL 1LA9050-2KA11 312 CA-EF10 0.24 0.22 68.0% 70.0% 3.0 0.09 0.12 1500 1800 56M 1LA9 BALL 1LA9053-4KA11 324 CA-EF10 0.31 0.26 62.0% 64.0% 3.8 0.12 0.16 3000 3600 56M 1LA9 BALL 1LA9053-2KA11 314 CA-EF10 0.31 0.28 69.0% 71.0% 3.8 0.12 0.16 1500 1800 63M 1LA9 BALL 1LA9060-4KA11 328 CA-EF10 0.41 0.34 66.0% 69.0% 4.1 0.18 0.25 3000 3600 63M 1LA9 BALL 1LA9060-2KA11 322 CA-EF10 0.48 0.43 70.0% 71.0% 4.1 0.18 0.25 1500 1800 63M 1LA9 BALL 1LA9063-4KA11 351 CA-EF10 0.62 0.54 62.0% 65.0% 5.1 0.25 0.33 3000 3600 63M 1LA9 BALL 1LA9063-2KA11 339 CA-EF10 0.63 0.52 70.0% 72.0% 5.1 0.25 0.33 1500 1800 71M 1LA9 BALL 1LA9070-4KA11 359 CA-EF10 0.81 0.75 70.0% 69.0% 6.0 0.37 0.5 3000 3600 71M 1LA9 BALL 1LA9070-2KA11 351 CA-EF10 0.94 0.87 74.0% 72.0% 6.0 0.37 0.5 1500 1800 71M 1LA9 BALL 1LA9073-4KA11 397 CA-EF10 1.03 0.98 71.0% 70.0% 7.2 0.55 0.75 3000 3600 71M 1LA9 BALL 1LA9073-2KA11 392 CA-EF10 1.42 1.32 75.0% 73.0% 7.2 0.55 0.75 1500 1800 80M 1LA9 BALL 1LA9080-4KA11 441 CA-EF10 1.32 1.26 77.0% 75.5% 9.8 0.75 1 3000 3600 80M 1LA9 BALL 1LA9080-2KA11 443 CA-EF10 1.65 1.52 80.0% 75.5% 9.8 0.75 1 1500 1800 80M 1LA9 BALL 1LA9083-4KA11 476 SA-EF10 1.80 1.58 81.0% 82.5% 12.3 0.75 1 1000 1200 90S 1LA9 BALL 1LA9090-6KA11 570 CA-EF10 2.00 1.78 75.5% 80.0% 15.7 1.1 1.5 3000 3600 80M 1LA9 BALL 1LA9083-2KA11 501 SA-EF10 2.15 1.94 84.0% 82.5% 12.3 1.1 1.5 1500 1800 90S 1LA9 BALL 1LA9090-4KA11 580 SA-EF10 2.45 2.20 84.0% 84.0% 15.0 1.1 1.5 1000 1200 90L 1LA9 BALL 1LA9096-6KA11 692 SA-EF10 2.80 2.55 82.0% 85.5% 19.0 1.5 2 3000 3600 90S 1LA9 BALL 1LA9090-2KA11 596 SA-EF10 2.95 2.60 85.0% 84.0% 15.0 1.5 2 1500 1800 90L 1LA9 BALL 1LA9096-4KA11 678 SA-EF10 3.30 2.95 85.0% 84.0% 18.0 1.5 2 1000 1200 100L 1LA9 BALL 1LA9106-6KA11 822 CA-EF10 3.65 3.20 85.0% 86.5% 25.0 2.2 3 3000 3600 90L 1LA9 BALL 1LA9096-2KA11 752 SA-EF10 4.25 3.85 86.5% 85.5% 18.6 2.2 3 1500 1800 100L 1LA9 BALL 1LA9106-4KA11 831 SA-EF10 4.55 4.05 86.5% 87.5% 25.0 2.2 3 1000 1200 112M 1LA9 BALL 1LA9113-6KA11 1030 SA-EF10 5.40 4.85 84.0% 87.5% 37.0 3 4 3000 3600 100L 1LA9 BALL 1LA9106-2KA11 905 SA-EF10 5.70 4.95 87.0% 86.5% 24.0 3 4 1500 1800 100L 1LA9 BALL 1LA9107-4KA11 946 SA-EF10 6.10 5.40 87.5% 87.5% 30.0 4 5 3000 3600 112M 1LA9 BALL 1LA9113-2KA11 1078 SA-EF10 7.40 6.10 88.5% 87.5% 35.0 4 5 1500 1800 112M 1LA9 BALL 1LA9113-4KA11 1165 SA-EF10 8.10 6.80 88.5% 87.5% 37.0 4 5 1000 1200 132M 1LA9 BALL 1LA9133-6KA11 1590 CA-EF10 8.50 6.90 84.0% 87.5% 49.0 5.5 7.5 3000 3600 132S 1LA9 BALL 1LA9130-2KA11 1360 SA-EF10 9.90 8.80 89.5% 88.5% 43.0 5.5 7.5 1500 1800 132S 1LA9 BALL 1LA9130-4KA11 1450 SA-EF10 10.6 9.7 89.5% 89.5% 45.0 5.5 7.5 1000 1200 132M 1LA9 BALL 1LA9134-6KA11 1970 SA-EF10 12.0 10.8 86.0% 89.5% 64.0 7.5 10 3000 3600 132S 1LA9 BALL 1LA9131-2KA11 1690 SA-EF10 13.0 11.4 90.5% 89.5% 56.0 7.5 10 1500 1800 132M 1LA9 BALL 1LA9133-4KA11 1810 SA-EF10 14.3 12.8 90.3% 89.5% 60.0 7.5 10 1000 1200 160M 1LA9 BALL 1LA9163-6KA11 2493 SA-EF10 17.1 15.0 88.0% 89.5% 98.0 11 15 3000 3600 160M 1LA9 BALL 1LA9163-2KA11 2333 CA-EF10 19.4 17.2 91.0% 90.2% 73.0 11 15 1500 1800 160M 1LA9 BALL 1LA9163-4KA11 2383 SA-EF10 20.5 18.2 91.5% 91.0% 81.0 11 15 1000 1200 160L 1LA9 BALL 1LA9166-6KA11 3393 CA-EF10 23.0 20.0 88.5% 90.2% 105.0 15 20 3000 3600 160M 1LA9 BALL 1LA9164-2KA11 3003 CA-EF10 26.3 23.0 91.5% 90.2% 82.0 15 20 1500 1800 160L 1LA9 BALL 1LA9166-4KA11 3043 CA-EF10 27.5 24.0 92.0% 91.0% 107.0 18.5 25 3000 3600 160L 1LA9 BALL 1LA9166-2KA11 3553 CA-EF10 31.5 28.0 92.3% 91.0% 102.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-15 Dimensions

IEC - TEFCs Introduction General Purpose Duty Duty Purpose 1LA9 - B14 Flange, Footless (w/o canopy) kw 50Hz Power HP 60Hz 50Hz RPM 60Hz Frame Type DE Bearing List Price $ Mult. Symb. FL Current 400v 50Hz 460v 60Hz High Efficiency FL Nom. Eff. 400v 50Hz 460v 60Hz Weight (kg) 0.06 0.08 1500 1800 56M 1LA9 BALL 1LA9050-4KA12 323 CA-EF10 0.22 0.18 61.0% 63.0% 3.0 0.09 0.12 3000 3600 56M 1LA9 BALL 1LA9050-2KA12 312 CA-EF10 0.24 0.22 68.0% 70.0% 3.0 0.09 0.12 1500 1800 56M 1LA9 BALL 1LA9053-4KA12 324 CA-EF10 0.31 0.26 62.0% 64.0% 3.8 0.12 0.16 3000 3600 56M 1LA9 BALL 1LA9053-2KA12 314 CA-EF10 0.31 0.28 69.0% 71.0% 3.8 0.12 0.16 1500 1800 63M 1LA9 BALL 1LA9060-4KA12 328 CA-EF10 0.41 0.34 66.0% 69.0% 4.1 0.18 0.25 3000 3600 63M 1LA9 BALL 1LA9060-2KA12 322 CA-EF10 0.48 0.43 70.0% 71.0% 4.1 0.18 0.25 1500 1800 63M 1LA9 BALL 1LA9063-4KA12 351 CA-EF10 0.62 0.54 62.0% 65.0% 5.1 0.25 0.33 3000 3600 63M 1LA9 BALL 1LA9063-2KA12 339 CA-EF10 0.63 0.52 70.0% 72.0% 5.1 0.25 0.33 1500 1800 71M 1LA9 BALL 1LA9070-4KA12 359 CA-EF10 0.81 0.75 70.0% 69.0% 6.0 0.37 0.5 3000 3600 71M 1LA9 BALL 1LA9070-2KA12 351 CA-EF10 0.94 0.87 74.0% 72.0% 6.0 0.37 0.5 1500 1800 71M 1LA9 BALL 1LA9073-4KA12 397 CA-EF10 1.03 0.98 71.0% 70.0% 7.2 0.55 0.75 3000 3600 71M 1LA9 BALL 1LA9073-2KA12 392 CA-EF10 1.42 1.32 75.0% 73.0% 7.2 0.55 0.75 1500 1800 80M 1LA9 BALL 1LA9080-4KA12 441 CA-EF10 1.32 1.26 77.0% 75.5% 9.8 0.75 1 3000 3600 80M 1LA9 BALL 1LA9080-2KA12 443 CA-EF10 1.65 1.52 80.0% 75.5% 9.8 0.75 1 1500 1800 80M 1LA9 BALL 1LA9083-4KA12 476 SA-EF10 1.80 1.58 81.0% 82.5% 12.3 0.75 1 1000 1200 90S 1LA9 BALL 1LA9090-6KA12 570 CA-EF10 2.00 1.78 75.5% 80.0% 15.7 1.1 1.5 3000 3600 80M 1LA9 BALL 1LA9083-2KA12 501 CA-EF10 2.15 1.94 84.0% 82.5% 12.3 1.1 1.5 1500 1800 90S 1LA9 BALL 1LA9090-4KA12 580 CA-EF10 2.45 2.20 84.0% 84.0% 15.0 1.1 1.5 1000 1200 90L 1LA9 BALL 1LA9096-6KA12 692 CA-EF10 2.80 2.55 82.0% 85.5% 19.0 1.5 2 3000 3600 90S 1LA9 BALL 1LA9090-2KA12 596 SA-EF10 2.95 2.60 85.0% 84.0% 15.0 1.5 2 1500 1800 90L 1LA9 BALL 1LA9096-4KA12 678 CA-EF10 3.30 2.95 85.0% 84.0% 18.0 1.5 2 1000 1200 100L 1LA9 BALL 1LA9106-6KA12 822 CA-EF10 3.65 3.20 85.0% 86.5% 25.0 2.2 3 3000 3600 90L 1LA9 BALL 1LA9096-2KA12 752 CA-EF10 4.25 3.85 86.5% 85.5% 18.6 2.2 3 1500 1800 100L 1LA9 BALL 1LA9106-4KA12 831 SA-EF10 4.55 4.05 86.5% 87.5% 25.0 2.2 3 1000 1200 112M 1LA9 BALL 1LA9113-6KA12 1030 CA-EF10 5.40 4.85 84.0% 87.5% 37.0 3 4 3000 3600 100L 1LA9 BALL 1LA9106-2KA12 905 CA-EF10 5.70 4.95 87.0% 86.5% 24.0 3 4 1500 1800 100L 1LA9 BALL 1LA9107-4KA12 946 SA-EF10 6.10 5.40 87.5% 87.5% 30.0 4 5 3000 3600 112M 1LA9 BALL 1LA9113-2KA12 1078 CA-EF10 7.40 6.10 88.5% 87.5% 35.0 4 5 1500 1800 112M 1LA9 BALL 1LA9113-4KA12 1165 CA-EF10 8.10 6.80 88.5% 87.5% 37.0 4 5 1000 1200 132M 1LA9 BALL 1LA9133-6KA12 1590 CA-EF10 8.50 6.90 84.0% 87.5% 49.0 5.5 7.5 3000 3600 132S 1LA9 BALL 1LA9130-2KA12 1360 CA-EF10 9.90 8.80 89.5% 88.5% 43.0 5.5 7.5 1500 1800 132S 1LA9 BALL 1LA9130-4KA12 1450 CA-EF10 10.6 9.7 89.5% 89.5% 45.0 5.5 7.5 1000 1200 132M 1LA9 BALL 1LA9134-6KA12 1970 CA-EF10 12.0 10.8 86.0% 89.5% 64.0 7.5 10 3000 3600 132S 1LA9 BALL 1LA9131-2KA12 1690 CA-EF10 13.0 11.4 90.5% 89.5% 56.0 7.5 10 1500 1800 132M 1LA9 BALL 1LA9133-4KA12 1810 CA-EF10 14.3 12.8 90.3% 89.5% 60.0 7.5 10 1000 1200 160M 1LA9 BALL 1LA9163-6KA12 2493 CA-EF10 17.1 15.0 88.0% 89.5% 98.0 11 15 3000 3600 160M 1LA9 BALL 1LA9163-2KA12 2333 CA-EF10 19.4 17.2 91.0% 90.2% 73.0 11 15 1500 1800 160M 1LA9 BALL 1LA9163-4KA12 2383 CA-EF10 20.5 18.2 91.5% 91.0% 81.0 11 15 1000 1200 160L 1LA9 BALL 1LA9166-6KA12 3393 CA-EF10 23.0 20.0 88.5% 90.2% 105.0 15 20 3000 3600 160M 1LA9 BALL 1LA9164-2KA12 3003 CA-EF10 26.3 23.0 91.5% 90.2% 82.0 15 20 1500 1800 160L 1LA9 BALL 1LA9166-4KA12 3043 CA-EF10 27.5 24.0 92.0% 91.0% 107.0 18.5 25 3000 3600 160L 1LA9 BALL 1LA9166-2KA12 3553 CA-EF10 31.5 28.0 92.3% 91.0% 102.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model Dimensions 7-16 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFCs 1LG6 The 1LG6 series of IEC motors are ideal for both indoor and outdoor applications and in severe operating atmospheres. These industry workhorses are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/chemical applications. Specifications 18.5kW to 200kW 1.15 service factor, 40 C ambient Dual Frequency rated 3000, 1500, 1000 RPM - 50 Hz 3600, 1800, 1200 RPM - 60 Hz 3 phase, 50 Hz; 230VD/400VY and 60 Hz; 460VY 3 phase, 50 Hz; 400VD/690VY and 60 Hz; 460VD Special voltages (50 Hz and 60 Hz) available Increase Energy Saving EU efficency class EFF1 Meets or exceeds EPAct efficiency standards (CC 032A) Class F insulation, Class B temperature rise Continuous Duty, Suitable for Converted fed operation CE Marked, IEC 60034 NEMA MG1-12 UL and CSA marks available 180 through 315 frames Features for Long Life Frame & End Shields Cast Iron construction for exceptional structural integrity. All motors are designed for IP55 (IEC 529), suitable for use in dusty or damp surroundings, ready for their use in the tropics. (IP56 and IP65 available) Rotor A unique offset laminated rotor core design provides improved efficiency while larger bars and Aluminum end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced (IEC 60034-14) for extended bearing life. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical grade steel laminations and the finest copper electrical magnet wire for lower losses and improved efficiencies. A unique stator core design lowers flux density and increases cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation DURIGNIT IR 2000, inverter-compatible up to 500 V, optionally up to 690 V. This insulation system comprised of high-grade enameled wires and insulating sheet materials combine with solvent-free impregnating resin. The system ensures a high level of mechanical and electrical strength as well as good serviceability and long motor life. The insulation offers general protection for the windings against corrosive gases, vapors, dust, oil and increased humidity, and resists the normal stresses of vibration. Cooling are fitted with a radial flow fan which functions independently of the direction of rotation (cooling method IC 411 to DIN EN 60034-6). The material of the external cooling fans is reinforced plastic. This material is tested and certified for a 20 year lifetime. Fan cowls are made of corrosion protected steel plate. Bearings Non-regreasable bearings, but optionally available with regreasing devices up to frame size 250 (Standard from frame 280 and above). The bearing nominal life is specified by standard calculation (DIN ISO 281) and is achieved or exceeds by 90% if used properly, if the operating conditions are below average a bearing life of 100,000 (Lh10 hours) can be achieved. Lubrication The grease life, for pre-lubricated motors, is tailored to the bearing life. For re-lubricated bearings, the motors are provided with a grease retaining system with the provision that when the grease containing chamber is full of old grease the grease is then ejected to the outside of the motor. High Efficiency Conduit Box The top mounted, Cast aluminum-construction terminal box (frames 225 and below, cast iron construction available as an option) and the Cast Iron-construction (frame 250 and above) can be ordered to the Right or left hand side of the motor as well as rotated 90º and 180º. Corrosion Resistance Zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion. (Stainless steel hardware also available) Flexible All Siemens IEC motors are available with a wide variety of options to meet your specific motor needs. 2009-2010 Low Voltage AC Selection and Pricing Guide 7-17 Introduction General Purpose Duty Duty Purpose Dimensions

IEC - TEFCs Introduction 1LG6 - Foot Mounted High Efficiency General Purpose kw 50Hz Power HP 60Hz 50Hz RPM 60Hz Frame Type DE Bearing List Price $ Mult. Symb. FL Current 400v 50Hz 460v 60Hz FL Nom. Eff. 400v 50Hz 460v 60Hz Weight (kg) Stock Model Duty Duty 15 20 1000 1200 180L 1LG6 BALL 1LG6186-6AA60 4290 SA-EF11 29.5 25.5 90.9% 91.0% 175.0 18.5 25 1500 1800 180M 1LG6 BALL 1LG6183-4AA60 3460 SA-EF11 34.5 31 92.6% 92.4% 155.0 18.5 25 1000 1200 200L 1LG6 BALL 1LG6206-6AA60 5250 CA-EF11 36 32 91.2% 91.7% 210.0 22 30 3000 3600 180M 1LG6 BALL 1LG6183-2AA60 4080 SA-EF11 38.5 34 94.1% 93.6% 180.0 22 30 1500 1800 180L 1LG6 BALL 1LG6186-4AA60 4020 CA-EF11 40.5 36.5 93.2% 92.4% 180.0 22 30 1000 1200 200L 1LG6 BALL 1LG6207-6AA60 6080 CA-EF11 42.0 38.5 91.9% 91.7% 240.0 30 40 3000 3600 200L 1LG6 BALL 1LG6206-2AA60 5290 CA-EF11 53 46 93.5% 92.4% 225.0 30 40 1500 1800 200L 1LG6 BALL 1LG6207-4AA60 5210 CA-EF11 55 48 93.3% 93.0% 225.0 30 40 1000 1200 225M 1LG6 BALL 1LG6223-6AA60 8150 CA-EF11 56 49 93.2% 93.0% 325.0 37 50 3000 3800 200L 1LG6 BALL 1LG6207-2AA60 6640 CA-EF11 64 57 94.1% 92.4% 255.0 37 50 1500 1800 225S 1LG6 BALL 1LG6220-4AA60 6330 CA-EF11 67 60 94.0% 93.6% 290.0 37 50 1000 1200 250M 1LG6 BALL 1LG6253-6AA60 9880 CA-EF11 69 61 93.7% 93.0% 405.0 45 60 3000 3600 225M 1LG6 BALL 1LG6223-2AA60 7920 CA-EF11 77 67 94.9% 94.1% 330.0 45 60 1500 1800 225M 1LG6 BALL 1LG6223-4AA60 7460 CA-EF11 81 70 94.5% 94.1% 330.0 45 60 1000 1200 280S 1LG6 BALL 1LG6280-6AA60 12100 CA-EF11 81 72 94.4% 94.1% 520.0 55 75 3000 3600 250M 1LG6 BALL 1LG6253-2AA60 9410 CA-EF11 93 84 95.3% 93.6% 420.0 55 75 1500 1800 250M 1LG6 BALL 1LG6253-4AA60 9050 CA-EF11 96 86 95.1% 94.5% 460.0 55 75 1000 1200 280M 1LG6 BALL 1LG6283-6AA60 14300 CA-EF11 99 89 94.6% 94.5% 570.0 75 100 3000 3600 280S 1LG6 BALL 1LG6280-2AB60 12900 CA-EF11 128 110 95.2% 95.0% 530.0 75 100 1500 1800 280S 1LG6 BALL 1LG6280-4AA60 12200 CA-EF11 130 114 95.1% 95.0% 575.0 75 100 1000 1200 315S 1LG6 BALL 1LG6310-6AA60 19400 CA-EF11 138 120 95.0% 94.5% 760.0 90 125 3000 3600 280M 1LG6 BALL 1LG6283-2AB60 15200 CA-EF11 150 136 95.6% 95.0% 615.0 90 125 1500 1800 280M 1LG6 BALL 1LG6283-4AA60 14300 CA-EF11 158 144 95.4% 95.0% 675.0 90 125 1000 1200 315M 1LG6 BALL 1LG6313-6AA60 21900 CA-EF11 160 148 95.3% 94.5% 935.0 110 150 3000 3600 315S 1LG6 BALL 1LG6310-2AB60 18300 CA-EF11 182 164 95.8% 94.5% 790.0 110 150 1500 1800 315S 1LG6 BALL 1LG6310-4AA60 17800 CA-EF11 190 170 95.9% 95.0% 810.0 110 150 1000 1200 315L 1LG6 BALL 1LG6316-6AA60 26400 CA-EF11 196 176 95.6% 95.0% 1010.0 132 175 3000 3600 315M 1LG6 BALL 1LG6313-2AB60 21900 CA-EF11 220 190 96.0% 95.0% 915.0 132 175 1500 1800 315M 1LG6 BALL 1LG6313-4AA60 21100 CA-EF11 225 198 96.1% 95.4% 965.0 132 175 1000 1200 315L 1LG6 BALL 1LG6317-6AA60 31400 CA-EF11 235 205 95.8% 95.4% 1180.0 160 200 3000 3600 315L 1LG6 BALL 1LG6316-2AB60 27200 CA-EF11 260 215 96.4% 95.4% 1055.0 160 200 1500 1800 315L 1LG6 BALL 1LG6316-4AA60 25500 CA-EF11 275 225 96.3% 95.4% 1105.0 160 200 1000 1200 315L 1LG6 BALL 1LG6318-6AA60 38100 CA-EF11 280 235 95.8% 95.4% 1245.0 200 250 3000 3600 315L 1LG6 BALL 1LG6317-2AB60 34000 CA-EF11 320 265 96.5% 95.4% 1245.0 200 250 1500 1800 315L 1LG6 BALL 1LG6317-4AA60 31800 CA-EF11 340 280 96.4% 95.8% 1305.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Dimensions Purpose 7-18 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFCs 1LG6 - Foot Mounted and PTC (1x Phase) kw 50Hz Power HP 60Hz RPM 50Hz 60Hz Frame Type DE Bearing List Price $ Mult. Symb. FL Current 400v 50Hz 460v 60Hz High Efficiency FL Nom. Eff. 400v 50Hz 460v 60Hz Weight (kg) Stock Model Introduction General Purpose 15 20 1000 1200 180L 1LG6 BALL 1LG6186-6AA60-Z A11 4290 CA-EF11 29.5 25.5 90.9% 91.0% 175.0 18.5 25 1500 1800 180M 1LG6 BALL 1LG6183-4AA60-Z A11 3460 CA-EF11 34.5 31 92.6% 92.4% 155.0 18.5 25 1000 1200 200L 1LG6 BALL 1LG6206-6AA60-Z A11 5250 CA-EF11 36 32 91.2% 91.7% 210.0 22 30 3000 3600 180M 1LG6 BALL 1LG6183-2AA60-Z A11 4080 CA-EF11 38.5 34 94.1% 93.6% 180.0 22 30 1500 1800 180L 1LG6 BALL 1LG6186-4AA60-Z A11 4020 SA-EF11 40.5 36.5 93.2% 92.4% 180.0 22 30 1000 1200 200L 1LG6 BALL 1LG6207-6AA60-Z A11 6280 CA-EF11 42.0 38.5 91.9% 91.7% 240.0 30 40 3000 3600 200L 1LG6 BALL 1LG6206-2AA60-Z A11 5490 SA-EF11 53 46 93.5% 92.4% 225.0 30 40 1500 1800 200L 1LG6 BALL 1LG6207-4AA60-Z A11 5410 SA-EF11 55 48 93.3% 93.0% 225.0 30 40 1000 1200 225M 1LG6 BALL 1LG6223-6AA60-Z A11 8423 CA-EF11 56 49 93.2% 93.0% 325.0 37 50 3000 3800 200L 1LG6 BALL 1LG6207-2AA60-Z A11 6840 SA-EF11 64 57 94.1% 92.4% 255.0 37 50 1500 1800 225S 1LG6 BALL 1LG6220-4AA60-Z A11 6303 SA-EF11 67 60 94.0% 93.6% 290.0 37 50 1000 1200 250M 1LG6 BALL 1LG6253-6AA60-Z A11 10153 CA-EF11 69 61 93.7% 93.0% 405.0 45 60 3000 3600 225M 1LG6 BALL 1LG6223-2AA60-Z A11 8193 CA-EF11 77 67 94.9% 94.1% 330.0 45 60 1500 1800 225M 1LG6 BALL 1LG6223-4AA60-Z A11 7733 CA-EF11 81 70 94.5% 94.1% 330.0 45 60 1000 1200 280S 1LG6 BALL 1LG6280-6AA60-Z A11 12440 CA-EF11 81 72 94.4% 94.1% 520.0 55 75 3000 3600 250M 1LG6 BALL 1LG6253-2AA60-Z A11 9683 CA-EF11 93 84 95.3% 93.6% 420.0 55 75 1500 1800 250M 1LG6 BALL 1LG6253-4AA60-Z A11 9323 SA-EF11 96 86 95.1% 94.5% 460.0 55 75 1000 1200 280M 1LG6 BALL 1LG6283-6AA60-Z A11 14640 CA-EF11 99 89 94.6% 94.5% 570.0 75 100 3000 3600 280S 1LG6 BALL 1LG6280-2AB60-Z A11 13240 CA-EF11 128 110 95.2% 95.0% 530.0 75 100 1500 1800 280S 1LG6 BALL 1LG6280-4AA60-Z A11 12540 SA-EF11 130 114 95.1% 95.0% 575.0 75 100 1000 1200 315S 1LG6 BALL 1LG6310-6AA60-Z A11 19740 CA-EF11 138 120 95.0% 94.5% 760.0 90 125 3000 3600 280M 1LG6 BALL 1LG6283-2AB60-Z A11 15540 CA-EF11 150 136 95.6% 95.0% 615.0 90 125 1500 1800 280M 1LG6 BALL 1LG6283-4AA60-Z A11 14640 SA-EF11 158 144 95.4% 95.0% 675.0 90 125 1000 1200 315M 1LG6 BALL 1LG6313-6AA60-Z A11 22240 CA-EF11 160 148 95.3% 94.5% 935.0 110 150 3000 3600 315S 1LG6 BALL 1LG6310-2AB60-Z A11 18640 CA-EF11 182 164 95.8% 94.5% 790.0 110 150 1500 1800 315S 1LG6 BALL 1LG6310-4AA60-Z A11 18140 SA-EF11 190 170 95.9% 95.0% 810.0 110 150 1000 1200 315L 1LG6 BALL 1LG6316-6AA60-Z A11 26740 CA-EF11 196 176 95.6% 95.0% 1010.0 132 175 3000 3600 315M 1LG6 BALL 1LG6313-2AB60-Z A11 22240 CA-EF11 220 190 96.0% 95.0% 915.0 132 175 1500 1800 315M 1LG6 BALL 1LG6313-4AA60-Z A11 21440 CA-EF11 225 198 96.1% 95.4% 965.0 132 175 1000 1200 315L 1LG6 BALL 1LG6317-6AA60-Z A11 31740 CA-EF11 235 205 95.8% 95.4% 1180.0 160 200 3000 3600 315L 1LG6 BALL 1LG6316-2AB60-Z A11 27540 CA-EF11 260 215 96.4% 95.4% 1055.0 160 200 1500 1800 315L 1LG6 BALL 1LG6316-4AA60-Z A11 25840 CA-EF11 275 225 96.3% 95.4% 1105.0 160 200 1000 1200 315L 1LG6 BALL 1LG6318-6AA60-Z A11 38440 CA-EF11 280 235 95.8% 95.4% 1245.0 200 250 3000 3600 315L 1LG6 BALL 1LG6317-2AB60-Z A11 34340 CA-EF11 320 265 96.5% 95.4% 1245.0 200 250 1500 1800 315L 1LG6 BALL 1LG6317-4AA60-Z A11 31800 CA-EF11 340 280 96.4% 95.8% 1305.0 Duty Duty Purpose Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz 2009-2010 Low Voltage AC Selection and Pricing Guide 7-19 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Options IEC Standard Description Order Type / Frame Code Pos. 1LA6 1LA7 1LA9 1LG6 Voltage 230VD / 400VY 50 Hz - 460VY 60Hz 1 11 100-160 56-160 56-160 180-315 400VD / 690VY 50 Hz - 460VD 60Hz 6 11 100-160 56-160 56-160 180-315 See Additional Voltages Below 9 11 100-160 56-160 56-160 180-315 Additional Voltages 440V D 60Hz L2R Z 460V D 60Hz L2T Z 575V D 60Hz L2V Z 220VD / 380VY 50Hz L1R Z 380VD / 660VY 50Hz L1L Z 415VD 50Hz L1D Z Feet & Flanges B3 Foot Monted - IMB3 0 12 100-160 56-160 56-160 180-315 IMV5 / IMV6 (No canopy) B5 Flange - IMB5 IMV3 / IMV1 (No canopy) 1 12 100-160 56-160 56-160 180-315 B14 Flange - IMB14 IMV19 / IMV18 (No canopy) 2 12 100-160 56-160 56-160 - B5 Flange - IMV1 with canopy 4 12 100-160 63-160 63-160 180-315 B5 Flange with Feet - IMB35 (No canopy) 6 12 100-160 63-160 63-160 180-315 B14 Flange with Feet - IMB34 (No canopy) 7 12 100-160 56-160 56-160 - Motor Protection 3 x PTC Thermistors Tripping - VFD Zone2 A10 Z 100-160 63-160 56-160 180-315 3 x PTC Thermistors Trippinig A11 Z 100-160 63-160 56-160 180-315 6 x PTC Thermistors Alarm and Tripping A12 Z 100-160 63-160 56-160 180-315 Motor temp. sensor KTY-84-130 A23 Z 100-160 63-160 56-160 180-315 Temperature sensor Tripping A31 Z 100-160 63-160 56-160 180-315 3 X RTD PT100 Alarm and Tripping A60 Z 100-160 100-160 100-160 180-315 Cooling Temperature & Insulation Increased air humidity/temperature C19 Z 100-160 63-160 63-160 180-315 30 to 60 g per m3 of air THCL.F, acc. to B, Cooling Temp. 45ºC, C22 Z 100-160 56-160 56-160 180-315 Power reduction 4% THCL.F, acc. to B, Cooling Temp. 50ºC, C23 Z 100-160 56-160 56-160 180-315 Power reduction 8% THCL.F, acc. to B, Cooling Temp. 55ºC, C24 Z 100-160 56-160 56-160 180-315 Power reduction 13% THCL.F, acc. to B, Cooling Temp. 60ºC, C25 Z 100-160 56-160 56-160 180-315 Power reduction 18% Increased air humidity/temperature 60 to 100 g per m3 of air C26 Z 100-160 63-160 63-160 180-315 External earthing L13 Z 100-160 56-160 56-160 - Country Certification CCC China Compulsory Certification (Only 1LA7 and 1LA9) 1) D01 Z - 56-90 56-90 - Electrical acc. to NEMA MG1-1 D30 Z 100-160 56-160 56-160 180-315 (Standard for 1LA9 and 1LG6) Designed to UL with recognition mark D31 Z 100-160 56-160 56-160 180-315 China Ex-Zone 2 Certificate D32 Z 100-160 63-160 63-160 180-315 Canadian standards (CSA) D40 Z 100-160 63-160 63-160 180-315 Zone 2 Version for Zone 2 main operation M72 Z 100-160 63-160 63-160 180-315 Version for Zone 2 VFD operation M73 Z 100-160 56-160 56-160 180-315 Prices and specifications are subject to change without notice 7-20 2009-2010 Low Voltage AC Selection and Pricing Guide

List Price Adder Per Frame ($) 56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 24 24 28 31 37 45 55 70 70 116 133 181 207 267 346 Introduction General Purpose 37 37 41 46 54 68 85 110 143 226 274 354 426 620 882 1) 37 37 41 46 54 68 85 110 143 - - - - - - - 73 80 93 111 129 154 199 268 386 515 677 835 1100 1530-52 56 62 71 85 111 139 201 305 401 592 807 1050 1380 52 52 56 62 71 85 111 139 201 - - - - - - 75 75 75 88 88 101 101 150 150 224 224 273 273 340 340 75 75 75 88 89 101 101 150 150 200 200 273 273 340 340 129 129 129 140 140 172 172 230 230 353 353 459 459 570 570 76 76 76 88 101 101 101 150 150 284 284 389 505 505 744 85 85 85 99 99 112 112 164 164 227 227 307 307 380 380 - - - - - 1270 1270 1270 1270 1270 1270 1270 1400 1400 1400-125 125 125 125 125 125 125 189 832 1060 1260 1580 1920 2350 Duty Duty Purpose 35 42 42 45 48 41 41 54 54 69 69 78 78 92 92 35 42 42 45 48 41 41 54 54 69 69 78 78 92 92 47 54 62 73 86 91 110 140 140 225 274 406 511 654 850 47 54 62 73 86 91 110 140 140 225 274 406 511 654 850-228 228 235 235 243 272 294 391 Consult Factory 20 20 20 20 24 24 24 24 24 Standard 34 34 34 34 34 - - - - - - - - - - 34 34 34 34 34 34 34 34 34 Standard 56 60 64 68 76 85 101 129 157 251 345 434 512 634 828-138 138 138 138 186 186 186 195 195 284 284 375 550 654 56 60 64 68 76 85 101 129 157 212 283 354 426 567 703-83 99 119 133 144 171 216 216 393 511 616 745 877 1050-273 309 347 360 376 401 465 465 750 974 1170 1430 1680 2010 2009-2010 Low Voltage AC Selection and Pricing Guide 7-21 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Options IEC Standard Description Order Type / Frame Code Pos. 1LA6 1LA7 1LA9 1LG6 Degree of Protection Degree of protection IP65 K50 Z 100-160 56-160 56-160 180-315 Degree of protection IP56 K52 Z 100-160 63-160 63-160 180-315 Condensation drain holes L12 Z 100-160 56-160 56-160 - Heating and Ventilation Anti-condensation heating for 230V K45 Z 100-160 56-160 56-160 180-315 Consult with factory for Zone 2 Anti-condensation heating for 115V K46 Z 100-160 56-160 56-160 180-315 Consult with factory for Zone 2 Metal Fan K35 Z 100-160 180-315 Steel plate fan cover L36 Z - - - 180-315 Connection Box Terminal Box on Right Hand Side K09 Z 100-160 80-160 80-160 180-315 (View from DE) Terminal Box on Left Hand Side K10 Z 100-160 80-160 80-160 180-315 (View from DE) Rotation of terminal box 90º K83 Z 100-160 56-160 56-160 180-315 (entry from DE) Rotation of terminal box 90º K84 Z 100-160 56-160 56-160 180-315 (entry from NDE) Cast Iron Terminal Box K15 Z - - - 180-315 Standard for 1LA6 motors Paint Special Paint Finish on RAL7030 K26 Z - - - 180-315 Primed Only K24 Z 100-160 56-160 56-160 180-315 Special Paint Finish on RAL Y54 100-160 56-160 56-160 180-315 See Table Below 2) Bearings & Lubrication Bearing for increased cantilever forces K20 Z 100-160 100-160 100-160 180-315 Regreasing device K40 Z 100-160 100-160 100-160 180-250 Test Certificates & Auxiliary Nameplates Auxiliary Nameplate with customer data Y82 Z 100-160 56-160 56-160 180-315 Routine Test Certificate 3.1 acc. EN 10204 B02 Z 100-160 56-160 56-160 180-315 Type test with heat run, Horizontal motors F83 Z 100-160 56-160 56-160 180-315 1 CCC Certificate Requirements 2 Pole : 2.2kw 4 Pole : 1.1kw 6 Pole : 0.75kw8 Pole : 0.55kw 2 Other Colors in RAL RAL Color Name RAL Color Name 1015 Light Ivory 5017 Traffic Blue 1019 Grey Beige 5018 Teal Blue 2003 Pastel Orange 5019 Capri Blue 2004 Pure Orange 6019 Patel Green 3007 Balck Red 7000 Squirrel 5007 Brilliant Blue 7004 Signal Grey 5009 Azure Blue 7011 Iron Grey 5010 Gentian Blue 7016 Anthracite Grey 5012 Light Blue 7022 Umber Grey 5015 Sky Blue 7033 Cement Grey Prices and specifications are subject to change without notice 7-22 2009-2010 Low Voltage AC Selection and Pricing Guide

List Price Adder Per Frame ($) 56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 126 126 126 126 126 126 126 126 189 253 314 379 443 505 568 139 139 139 139 139 139 139 139 208 276 347 417 486 556 624 20 20 20 20 20 25 25 25 25 Standard 309 309 348 348 348 362 362 435 484 536 616 740 764 764 795 309 309 355 358 361 362 386 435 435 536 616 740 764 764 795-126 126 126 126 159 189 220 253 284 314 347 379 410 443 - - - - - - - - - 71 88 98 140 180 197 - - - 30 34 88 96 103 110 311 367 434 645 724 834 Introduction General Purpose Duty - - - 30 34 88 96 103 110 311 367 434 645 724 834 14 14 15 17 20 50 62 82 101 38 49 61 73 87 104 14 14 15 17 20 50 62 82 101 38 49 61 73 87 104 - - - - - - - - - 330 438 645 Standard Standard 159 198 294 356 438 563 18 18 18 18 23 23 23 37 37 70 70 70 70 70 70 51 51 51 51 51 87 87 113 113 159 198 294 356 438 563 Duty Purpose - - - - - 85 99 111 148 233 270 305 352 395 441 - - - - - 267 273 281 305 321 362 401 482 Standard 35 35 35 35 35 35 35 35 35 58 58 58 73 73 92 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 3570 3570 3570 4160 4760 5350 5700 6190 6540 7480 8350 8830 8830 9950 11200 2009-2010 Low Voltage AC Selection and Pricing Guide 7-23 Dimensions

Introduction General Purpose Duty Duty IEC - TEFCs 1MJ6/1MJ7 Siemens explosion-protected motors go further than the basic safety requirements. Our rugged EEx motors are completely reliable even under the most extreme conditions and under hazardous environments such as in chemical plants, the oil industry or in gas works. They comply with the strictest safety standards for the protection of life, machines and environment. All explosion-protected motors from Siemens have been tested by the German Federal Institute of Science and Technology (PTB) or by the German Coal and Steel Technology Co. (DMT). Specifications.25kW to 132kW Guideline 94/9/94EG, ATEX 100a 3000, 1500, 1000 or 750 RPM 3 Phase, 50 Hz; 230D/400Y V 3 Phase, 50 Hz; 400D/690Y V Special voltages (50 Hz and 60 Hz) available Increase Energy Saving EU efficiency class EFF2 Class F insulation, Class B temperature rise Continuous Duty Suitable for Converted fed operation CE Marked, IEC 60034, IEC 60079 71 through 315 frames Features for Long Life Frame & End Shields Cast Iron construction for high degree of operational reliability in aggressive atmospheres. All motors are designed for IP55 (IEC 529), suitable for use in dusty or damp surroundings, ready for their use in the tropics. (IP56 available) Specifications table begins on the next page Rotor A unique offset laminated rotor core design provides improved efficiency while larger bars and Aluminum end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced (IEC 60034-14) for extended bearing life Stator/Windings Manufactured with premium electrical grade steel laminations and the finest copper electrical magnet wire for lower losses and improved efficiencies. A unique stator core design lowers flux density and increases cooling capacity. Large conductor cross section reduces resistance, also lowering stator losses. Insulation DURIGNIT IR 2000, inverter-compatible up to 500 V, optionally up to 690 V. This insulation system comprised high-grade enameled wires and insulating sheet materials combine with solvent-freeimpregnating resin. The system ensures a high level of mechanical and electrical strength as well as good serviceability and long motor life. The insulation offers general protection for the windings against corrosive gases, vapors, dust, oil and increased humidity, and resists the normal stresses of vibration. Cooling are fitted with a radial-flow fan which functions independently of the direction of rotation (cooling method IC 411 to DIN EN 60034-6). The material of the external cooling fans is reinforced plastic. This material is tested and certified for a 20 year lifetime. Fan cowls are made of corrosion protected steel plate. Bearings The bearing nominal life is specified by standard calculation (DIN ISO 281) and is achieved or exceeds by 90% if used according to instructions, if the operating conditions are below average a bearing life of 100,000 (Lh10 hours) can be achieved. Explosion Proof Lubrication The grease life, for pre-lubricated motors, is tailored to the bearing life. In those cases where re-lubrication is chosen, the motors are provided with a grease retaining system that prevents grease from entering the motor. Siemens IEC motors use lithium based grease. Conduit Box Aluminum-construction for frames up to 160M, Cast Iron construction for frames 160L and above, top mounted as standard. The terminal box can be ordered to either side of the motor or be rotated 90º or 180º (frames size 80 and above), providing a more flexible mounting. Corrosion Resistance Zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion. (Stainless steel hardware also available) Flexible All Siemens IEC motors are available with a wide variety of options to meet your specific motor needs. Dimensions Purpose 7-24 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFCs 1MJ6 - Foot Mounted kw 50Hz kw 60Hz RPM rame Type DE Bearing Part Number List Price $ Mult. Symb. FL Amps 50Hz FL Nom. Eff. 50Hz 0.25 0.29 1500 71M 1MJ6 BALL 1MJ6070-4CB60 887 CA-EXD1 0.78 60.0% 20.0 0.25 0.29 1000 71M 1MJ6 BALL 1MJ6073-6CA60 933 CA-EXD1 0.82 63.0% 16.0 0.37 0.43 3000 71M 1MJ6 BALL 1MJ6070-2CA60 897 CA-EXD1 0.98 67.0% 19.0 0.37 0.43 1500 71M 1MJ6 BALL 1MJ6073-4CB60 919 CA-EXD1 1.13 64.0% 21.0 0.37 0.43 1000 80M 1MJ6 BALL 1MJ6080-6CA60 948 CA-EXD1 1.18 64.0% 35.0 0.37 0.43 750 90L 1MJ6 BALL 1MJ6096-8CB60 1170 CA-EXD1 1.16 61.0% 27.5 0.55 0.63 3000 71M 1MJ6 BALL 1MJ6073-2CA60 925 CA-EXD1 1.38 71.0% 20.0 0.55 0.63 1500 80M 1MJ6 BALL 1MJ6080-4CA60 937 CA-EXD1 1.42 71.0% 24.0 0.55 0.63 1000 80M 1MJ6 BALL 1MJ6083-6CA60 1020 CA-EXD1 1.67 64.0% 22.5 0.55 0.63 750 90L 1MJ6 BALL 1MJ6097-8CB60 1290 CA-EXD1 1.62 65.0% 29.5 0.75 0.86 3000 80M 1MJ6 BALL 1MJ6080-2CA60 948 CA-EXD1 1.75 72.0% 24.0 0.75 0.86 1500 80M 1MJ6 BALL 1MJ6083-4CA60 964 CA-EXD1 1.88 73.0% 26.0 0.75 0.86 1000 90L 1MJ6 BALL 1MJ6096-6CA60 1110 CA-EXD1 2.1 69.0% 32.0 0.75 0.86 750 100L 1MJ6 BALL 1MJ6106-8CB60 1450 CA-EXD1 2.15 65.0% 40.0 1.1 1.3 3000 80M 1MJ6 BALL 1MJ6083-2CA60 1020 CA-EXD1 2.45 74.0% 26.0 1.1 1.3 1500 90L 1MJ6 BALL 1MJ6096-4CA60 1100 CA-EXD1 2.7 73.0% 32.0 1.1 1.3 1000 90L 1MJ6 BALL 1MJ6097-6CA60 1230 CA-EXD1 2.95 72.0% 32.0 1.1 1.3 750 100L 1MJ6 BALL 1MJ6107-8CB60 1730 CA-EXD1 2.9 74.0% 48.0 1.5 1.75 3000 90L 1MJ6 BALL 1MJ6096-2CA60 1110 CA-EXD1 3.3 78.0% 32.0 1.5 1.75 1500 90L 1MJ6 BALL 1MJ6097-4CA60 1190 CA-EXD1 3.5 77.0% 35.0 1.5 1.75 1000 100L 1MJ6 BALL 1MJ6106-6CA60 1420 CA-EXD1 4 75.0% 39.0 1.5 1.75 750 112M 1MJ6 BALL 1MJ6113-8CB60 2050 CA-EXD1 4 74.0% 52.0 2.2 2.55 3000 90L 1MJ6 BALL 1MJ6097-2CA60 1280 CA-EXD1 4.6 80.0% 35.0 2.2 2.55 1500 100L 1MJ6 BALL 1MJ6106-4CA60 1410 CA-EXD1 5.1 78.0% 44.0 2.2 2.55 1000 112M 1MJ6 BALL 1MJ6113-6CA60 1840 CA-EXD1 5.5 76.0% 52.0 2.2 2.55 750 132S 1MJ6 BALL 1MJ6130-8CB60 2490 CA-EXD1 6 74.0% 78.0 3 3.45 3000 100L 1MJ6 BALL 1MJ6106-2CA60 1590 CA-EXD1 6.2 82.0% 44.0 3 3.45 1500 100L 1MJ6 BALL 1MJ6107-4CA60 1610 CA-EXD1 6.6 80.0% 47.0 3 3.45 1000 132S 1MJ6 BALL 1MJ6130-6CA60 2260 CA-EXD1 7.4 78.0% 78.0 3 3.45 750 132M 1MJ6 BALL 1MJ6133-8CB60 2850 CA-EXD1 7.9 76.0% 85.0 4 4.6 3000 112M 1MJ6 BALL 1MJ6113-2CA60 1860 CA-EXD1 7.8 84.0% 57.0 4 4.6 1500 112M 1MJ6 BALL 1MJ6113-4CA60 1880 CA-EXD1 8.5 83.0% 58.0 4 4.6 1000 132M 1MJ6 BALL 1MJ6133-6CA60 2600 CA-EXD1 9.6 79.0% 85.0 Explosion Proof Weight (kg) 4 4.6 750 160M 1MJ6 BALL 1MJ6163-8CB60 3380 CA-EXD1 9.9 81.0% 119.0 5.5 6.3 3000 132S 1MJ6 BALL 1MJ6130-2CA60 2280 CA-EXD1 10.5 85.0% 75.0 5.5 6.3 1500 132S 1MJ6 BALL 1MJ6130-4CA60 2330 CA-EXD1 11.1 86.0% 76.0 5.5 6.3 1000 132M 1MJ6 BALL 1MJ6134-6CA60 2880 CA-EXD1 12.6 83.0% 92.0 5.5 6.3 750 160M 1MJ6 BALL 1MJ6164-8CB60 4020 CA-EXD1 13.3 83.0% 134.0 7.5 8.6 3000 132S 1MJ6 BALL 1MJ6131-2CA60 2600 CA-EXD1 14 87.0% 82.0 7.5 8.6 1500 132M 1MJ6 BALL 1MJ6133-4CA60 2730 CA-EXD1 15 86.0% 85.0 7.5 8.6 1000 160M 1MJ6 BALL 1MJ6163-6CA60 3590 CA-EXD1 17.5 86.0% 134.0 7.5 8.6 750 160L 1MJ6 BALL 1MJ6166-8CB60 4840 CA-EXD1 17.9 84.0% 159.0 11 12.6 3000 160M 1MJ6 BALL 1MJ6163-2CA60 3540 CA-EXD1 20.5 88.0% 123.0 11 12.6 1500 160M 1MJ6 BALL 1MJ6163-4CA60 3550 CA-EXD1 21.5 87.0% 128.0 11 12.6 1000 160L 1MJ6 BALL 1MJ6166-6CA60 4690 CA-EXD1 24.5 87.0% 167.0 11 13.2 750 180L 1MJ6 BALL 1MJ6186-8CB60 6290 CA-EXD1 26 87.0% 191.0 15 17.3 3000 160M 1MJ6 BALL 1MJ6164-2CA60 4310 CA-EXD1 26.5 89.0% 134.0 15 17.3 1500 160L 1MJ6 BALL 1MJ6166-4CA60 4450 CA-EXD1 28.5 89.0% 158.0 15 18 1000 180L 1MJ6 BALL 1MJ6186-6CA60 6240 CA-EXD1 29.5 89.0% 190.0 15 18 750 200L 1MJ6 BALL 1MJ6207-8CB60 8090 CA-EXD1 32 87.5% 263.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz 2009-2010 Low Voltage AC Selection and Pricing Guide Stock Model 7-25 Introduction General Purpose Duty Duty Purpose Dimensions

IEC - TEFCs 1MJ6 - Foot Mounted kw 50Hz kw 60Hz RPM rame Type DE Bearing Part Number List Price $ Mult. Symb. FL Amps 50Hz FL Nom. Eff. 50Hz Explosion Proof Weight (kg) 18.5 21.3 3000 160L 1MJ6 BALL 1MJ6166-2CA60 4910 CA-EXD1 32.5 91.0% 161.0 18.5 21.3 1500 180M 1MJ6 BALL 1MJ6183-4CA60 5490 CA-EXD1 35 90.5% 175.0 18.5 22 1000 200L 1MJ6 BALL 1MJ6206-6CA60 7500 CA-EXD1 36 90.2% 240.0 22 24.5 3000 180M 1MJ6 BALL 1MJ6183-2CA60 5840 CA-EXD1 39 92.0% 175.0 22 25.3 1500 180L 1MJ6 BALL 1MJ6186-4CA60 6130 CA-EXD1 41 91.2% 189.0 22 26.5 1000 200L 1MJ6 BALL 1MJ6207-6CA60 8230 CA-EXD1 42.5 90.8% 255.0 30 33.5 3000 200L 1MJ6 BALL 1MJ6206-2CA60 7500 CA-EXD1 53 92.3% 250.0 30 34.5 1500 200L 1MJ6 BALL 1MJ6207-4CA60 7650 CA-EXD1 55 91.8% 247.0 37 41.5 3000 200L 1MJ6 BALL 1MJ6207-2CA60 8750 CA-EXD1 64 92.8% 266.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Stock Model Dimensions Introduction General Purpose Duty Purpose Duty 7-26 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFCs 1MJ7 - Foot Mounted kw 50Hz kw 60Hz RPM Frame Type DE Bearing Part Number List Price $ Mult. Symb. FL Amps 50Hz Explosion Proof FL Nom. Eff. 50Hz 18.5 22 750 225S 1MJ6 BALL 1MJ7220-8CB60 9680 CA-EXD2 37.5 88.6% 325.0 22 26.5 750 225M 1MJ7 BALL 1MJ7223-8CB60 11300 CA-EXD2 43.5 90.1% 350.0 30 36 1000 225M 1MJ7 BALL 1MJ7223-6CA60 11100 CA-EXD2 56 92.0% 330.0 30 36 750 250M 1MJ7 BALL 1MJ7253-8CB60 14300 CA-EXD2 58 91.6% 465.0 37 42.5 1500 225S 1MJ7 BALL 1MJ7220-4CA60 9310 CA-EXD2 67 93.0% 325.0 37 44.5 1000 250M 1MJ7 BALL 1MJ7253-6CA60 14200 CA-EXD2 69 92.4% 440.0 37 44.5 750 280S 1MJ7 BALL 1MJ7280-8CB60 18400 CA-EXD2 70 92.7% 570.0 45 51 3000 225M 1MJ7 BALL 1MJ7223-2CB60 11200 CA-EXD2 77 93.9% 335.0 45 52 1500 225M 1MJ7 BALL 1MJ7223-4CA60 10700 CA-EXD2 80 93.4% 355.0 45 54 1000 280S 1MJ7 BALL 1MJ7280-6CA60 17700 CA-EXD2 81 93.0% 560.0 45 54 750 280M 1MJ7 BALL 1MJ7283-8CB60 21600 CA-EXD2 84 92.8% 620.0 55 62 3000 250M 1MJ7 BALL 1MJ7253-2CB60 13600 CA-EXD2 94 93.7% 445.0 55 63 1500 250M 1MJ7 BALL 1MJ7253-4CA60 13400 CA-EXD2 97 94.0% 465.0 55 66 1000 280M 1MJ7 BALL 1MJ7283-6CA60 21200 CA-EXD2 99 93.6% 600.0 55 66 750 315S 1MJ7 Roller (DE) 1MJ7310-8CB60 27700 CA-EXD2 104 93.1% 780.0 75 84 3000 280S 1MJ7 BALL 1MJ7280-2CC60 18700 CA-EXD2 128 94.7% 600.0 75 86 1500 280S 1MJ7 BALL 1MJ7280-4CA60 18200 CA-EXD2 132 94.7% 630.0 75 90 1000 315S 1MJ7 Roller (DE) 1MJ7310-6CA60 27800 CA-EXD2 136 93.8% 810.0 75 90 750 315M 1MJ7 Roller (DE) 1MJ7313-8CB60 34800 CA-EXD2 140 93.6% 890.0 90 101 3000 280M 1MJ7 BALL 1MJ7283-2CC60 21700 CA-EXD2 150 95.1% 640.0 90 104 1500 280M 1MJ7 BALL 1MJ7283-4CA60 20800 CA-EXD2 160 95.0% 680.0 90 108 1000 315M 1MJ7 Roller (DE) 1MJ7313-6CA60 32600 CA-EXD2 162 94.2% 870.0 110 123 3000 315S 1MJ7 Roller (DE) 1MJ7310-2CC60 28500 CA-EXD2 186 94.8% 840.0 110 127 1500 315S 1MJ7 Roller (DE) 1MJ7310-4CA60 25600 CA-EXD2 194 94.8% 870.0 132 148 3000 315M 1MJ7 Roller (DE) 1MJ7313-2CC60 33300 CA-EXD2 225 95.1% 900.0 132 152 1500 315M 1MJ7 Roller (DE) 1MJ7313-4CA60 30300 CA-EXD2 232 95.5% 950.0 Prices and specifications are subject to change without notice Stock availability subject to sale FL Amps at 400V 50Hz Weight (kg) Stock Model Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-27 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Options IEC Explosion Proof Description Code Pos. 1MJ6 1MJ7 Voltage 230VD / 400VY 1 11 71-200 225-315 50 Hz - 460VY 60Hz 400VD / 690VY 6 11 71-200 225-315 50 Hz - 460VD 60Hz See Additional 9 11 71-200 225-315 Voltages Below Additional Voltages 440V D 60Hz L2R Z 460V D 60Hz L2T Z 575V D 60Hz L2V Z 220VD / 380VY 50Hz L1R Z 380VD / 660VY 50Hz L1L Z 425VD 50Hz L1D Z Feet & Flanges B3 Foot Monted - IMB3IMV5 / IMV6 (No canopy) 0 12 71-200 225-315 B5 Flange - IMB5 IMV3 / IMV1 (No canopy) 1 12 71-200 225-315 B14 Flange - IMB14 IMV19 / IMV18 (No canopy) 2 12 71-90 - B5 Flange - IMV1 with canopy 4 12 71-200 225-315 B5 Flange with Feet - IMB35 (No canopy) 6 12 71-200 225-315 B14 Flange with Feet - IMB34 (No canopy) 7 12 71-90 - Motor Protection 3 x PTC Thermistors Trippinig A11 Z 71-200 225-315 6 x PTC Thermistors Alarm and Tripping A12 Z 71-200 225-315 3 x PTC Thermistors Alarm, VFD A15 Z 71-200 225-315 6 x PTC Thermistors Alarm and Tripping, VFD A16 Z 71-200 225-315 Cooling Temperature & Insulation Increased air humidity/temperature C19 Z 71-200 225-315 30 to 60 g per m3 of air THCL.F, acc. to B, Cooling Temp. 45ºC, C22 Z 71-200 225-315 Power reduction 4% THCL.F, acc. to B, Cooling Temp. 50ºC, C23 Z 71-200 225-315 Power reduction 8% THCL.F, acc. to B, Cooling Temp. 55ºC, C24 Z 71-200 225-315 Power reduction 13% THCL.F, acc. to B, Cooling Temp. 60ºC, C25 Z 71-200 225-315 Power reduction 18% Increased air humidity/temperature C26 Z 71-200 225-315 60 to 100 g per m3 of air External earthing L13 Z 71-200 225-315 Country Certification CCC China Compulsory Certification D01 Z 71-90 - (Only 1LA7 and 1LA9) China Ex-Zone 2 Certificate D32 Z 71-200 225-315 Degree of Protection Degree of protection IP65 K50 Z 71-200 225-315 Degree of protection IP56 K52 Z 71-200 225-315 Heating & Ventilation Anti-condensation heating for 230V K45 Z 71-200 225-315 Consult with factory for Zone 2 Anti-condensation heating for 115V K46 Z 71-200 225-315 Consult with factory for Zone 2 Metal Fan K35 Z 100-200 225-315 Prices and specifications are subject to change without notice 7-28 2009-2010 Low Voltage AC Selection and Pricing Guide

71 80 90 100 112 132 160 180 200 225 250 280 315 28 31 37 45 55 70 86 112 129 181 207 267 346 Introduction General Purpose Duty 64 73 84 103 129 175 234 380 448 562 713 890 1170 64 73 84 - - - - - - - - - - 112 132 149 175 214 283 382 616 755 942 1180 1460 1930 80 84 104 129 167 269 411 482 562 713 960 1250 1640 80 84 104 - - - - - - - - - - 336 347 347 362 362 422 422 522 522 701 701 799 799 527 545 545 573 573 632 632 801 801 1020 1020 1090 1090 357 369 369 383 383 397 397 547 547 688 688 1020 1020 592 592 592 592 592 592 592 1020 1020 1250 1250 1490 1490 498 498 498 542 570 590 840 981 1110 2200 2590 3070 3500 4 35 35 41 41 54 54 69 69 78 78 92 92 Duty Purpose 32 32 32 38 38 50 50 64 64 72 72 85 85 57 65 76 94 113 145 174 225 285 421 530 680 883 57 65 76 94 105 134 161 208 264 390 491 630 818 600 608 608 660 717 758 1040 1210 1310 Consult Factory Standard 34 34 34 - - - - - - - - - - 138 138 138 186 186 186 195 195 284 284 375 550 654 203 203 203 222 222 222 222 493 541 618 791 906 1010 748 748 748 748 958 1050 1050 1130 1130 4180 4680 5210 5720 373 373 373 417 445 464 651 727 798 845 936 1060 1060 373 373 373 417 445 464 651 727 798 845 936 1060 1060 - - - 159 189 220 253 354 354 625 666 666 755 2009-2010 Low Voltage AC Selection and Pricing Guide 7-29 Dimensions

Options IEC Explosion Proof Introduction Description Code Pos. 1MJ6 1MJ7 Connection Box Terminal Box on Right Hand Side (View from DE) K09 Z 90-200 225-315 Terminal Box on Left Hand Side (View from DE) K10 Z 90-200 225-315 Rotation of terminal box 90º(entry from DE) K83 Z 71-200 225-315 Rotation of terminal box 90º (entry from NDE) K84 Z 71-200 225-315 Cast Iron Terminal Box (Standard for 160L Frame) K15 Z 71-200 225-315 Paint Special Paint Finish on RAL7030 K26 Z 71-200 225-315 Primed Only K24 Z 71-200 225-315 Special Paint Finish on RAL See Table Below 2) Y54 71-200 225-315 Bearings and Lubrication Bearing for increased cantilever forces K20 Z 71-200 225-315 Regreasing device K40 Z 71-200 225-315 Test Certificates & Auxiliary Nameplates Bearing for increased cantilever forces Y82 Z 71-200 225-315 Regreasing device B02 Z 71-200 225-315 Type test with heat run, Horizontal motors F83 Z 71-200 225-315 2 Other Colors in RAL RAL Color Name RAL Color Name 1015 Light Ivory 5017 Traffic Blue 1019 Grey Beige 5018 Teal Blue 2003 Pastel Orange 5019 Capri Blue 2004 Pure Orange 6019 Patel Green 3007 Balck Red 7000 Squirrel 5007 Brilliant Blue 7004 Signal Grey 5009 Azure Blue 7011 Iron Grey 5010 Gentian Blue 7016 Anthracite Grey 5012 Light Blue 7022 Umber Grey 5015 Sky Blue 7033 Cement Grey Prices and specifications are subject to change without notice Dimensions General Purpose Duty Duty Purpose 7-30 2009-2010 Low Voltage AC Selection and Pricing Guide

71 80 90 100 112 132 160 180 200 225 250 280 315 - - 98 102 110 120 175 311 367 434 645 724 834 - - 98 102 110 120 175 311 367 434 645 724 834 25 27 33 43 54 72 83 91 101 111 123 136 148 25 27 33 43 54 72 83 91 101 111 123 136 148 667 667 667 667 906 960 960 1130 1130 1130 Standard Standard 351 430 524 676 18 18 23 23 23 37 37 69 69 69 69 69 69 51 51 51 87 87 113 113 159 198 481 608 770 1020 - - - - - - - 213 246 276 321 - - - - - - - - - 386 434 482 579 Standard 35 35 35 35 35 35 35 58 58 58 73 73 92 24 24 24 24 24 24 24 24 24 24 24 24 24 3570 4160 4760 5350 5700 6190 6540 7480 8350 8830 8830 9950 11200 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 7-31 Dimensions

Notes Dimensions Introduction Purpose Duty Duty General Purpose 7-32 2009-2010 Low Voltage AC Selection and Pricing Guide

Introduction General Purpose Duty NEMA Motor Modifications Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 8-1 Dimensions

Introduction Siemens new program provides 'quick' deliveries for a wide selection of stock motor modifications from the Little Rock Modification Center. Definitions Delivery - 2 days* - Consists of a combination of 16 figures and letters structured to describe the characteristics of the NEMA motor for order entry. Please refer to Section 9 for the complete part numbering system. Example: 1LE21012AB214AA3 - GP10A, 10HP, 1800RPM, 208-230/460V, 215T, horizontal foot-mounted Positioning 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 L E 2 1 0 1 2 A B 2 1 4 A A 3 Order Code - Figures or letters describing the or Option. Order Code Position - The position within the that the or Option Order Code would be added. Ordering Instructions 1. Select stock motor from Sections 2 thru 4. (Note ) 2. Verify applicability of desired (s). (Per motor type & frame on pages 5-4 to 5-7) 3. Select applicable (s). (Note Order Code, Order Code Position and List Price Adder from pages 5-4 to 5-7) 4. Construct new and List Price. (See examples) a. If the Order Code Position is 12, 13, 14, 15 or 16, replace the figure(s) or letter(s) at the same position in the stock motor with the Order Code. b. If the Order Code Position is Z, add a '-Z' to the end of the stock motor. Then add a '+' sign followed by the Order Code. plus Options (See Section 6) - Available as custom built motors only. Please contact Siemens for delivery time. See example on page 6-1. * Working days, calculated from normal business hours excluding holidays and weekends, not including the day the purchase order is received. Subject to availability of the stock motors and parts at the time of order entry. Maximum 3 s per motor. Dimensions General Purpose Duty Duty Purpose 8-2 2009-2010 Low Voltage AC Selection and Pricing Guide

Motor Pricing Examples Example #1: 10HP, 1800RPM, 208-230/460V, 215T, GP10A, D-flange with feet, normally closed thermostats and bi-directional rotation arrow. Introduction General Purpose Base List Price: $649 1LE21012AB214AA3 List Price Adders: D-Flange with Feet $273 Order Code F, Order Code Position 14 Thermostats $150 Order Code G, Order Code Position 15 Rotation Arrow $95 Order Code K70, Order Code Position Z Total List Price: $1,167 New - 1LE21012AB214FG3-Z +K70 Delivery: 2 Working Days, subject to availability Duty Example #2: 75HP, 1800RPM, 460V, 365T, RGZESD, horizontal foot mounted with C-face and 115 volt space heaters. Base List Price: $6,305 1LE29513CB212AA3 List Price Adders: C-Face $703 Order Code E, Order Code Position 14 Space Heaters $351 Order Code A40, Order Code Position Z Total List Price: $7,359 New - 1LE29513CB212EA3-Z +A40 Delivery: 2 Working Days, subject to availability Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 8-3 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Overview Description Code Order Code Pos GP10A GP100A GP10 GP100 RGZP 8-4 2009-2010 Low Voltage AC Selection and Pricing Guide Motor Type / Frame Applicability SD10 RGZESD RGZEESD RGZEESDX Altitude / Ambient Rerate/Derate Y80 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Assembly - Mounting & Terminal Box Position F-2 2 16 140-250 140-440 280-440 140-440 280-440 280-440 140-440 280-440 F-3 0 16 140-250 - - - - - - - W-1 9+R1A 16+Z 140-250 140-440 280-440 140-440 280-440 280-440 140-440 280-440 W-2 9+R2A 16+Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 W-3 9+R3A 16+Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 W-4 9+R4A 16+Z 140-250 140-440 280-440 140-440 280-440 280-440 140-440 280-440 W-5 6 16 140-250 140-440 280-440 140-440 280-440 280-440 140-440 280-440 W-8 7 16 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 C-1 8 16 140-250 140-440 280-440 140-440 280-440 280-440 140-440 280-440 C-2 1 16 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Bearings Sealed Ball bearings 1 (except 2 pole, 360+ frames) L68 Z - 140-440 280-440 140-S449 280-S449 280-S449 - - Breathers and Drain Plugs T Drain SS L45 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Crouse Hinds - UL L46 Z - 280-440 280-440 280-S449 280-S449 280-S449 280-S449 280-S449 Approved Conduit Box - Main Orient 90 deg CCW J84 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Orient 180 deg CCW J85 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Orient 270 deg CCW J86 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Conduit Box - Auxiliary for Thermostats Condulet to Main Box J12 Z - 440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Conduit Box - Auxiliary for Space Heaters Condulet to Main Box J52 Z - 440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Drip Cover Drip cover without K33 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 vertical lifting devices Export Packaging Sea Freight - Siemens B09 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Standard Flanged End Shields C-Face with Feet 2 E 14 140-250 140-440 280-440 140-440 280-440 280-440 140-440 280-440 C-Face without Feet G 14 140-250 140-250 - 140-250 - - 140-250 - D-Flange with Feet F 14 140-250 140-250 - 140-250 - - 140-250 - Grounding Provision (tapped hole L27 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 on frame w/bolt) Hardware Stainless Steel L22 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Lifting Eyebolt 3 L20 Z Standard 140 Standard 140 Standard Standard Standard Standard Duty Group D, F&G, 1.15SF M80 Z - - - - - - - - (Rerate) Insulation Fungus Protection C07 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Leads / Terminal Blocks Burndy Hydent type YA K80 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Sealed Leads K89 Z - 280-440 280-440 140-440 280-440 280-440 140-440 280-440 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames

RGZZESD RGZZESD 1D1 RGZESDI RGZZESDI RGZV -ESD -ILESD RGZZV -ESD -ILESD List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 S449 Introduction General Purpose 140-440 140-440 140-S449 140-440 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 - - - - - - 200 200 200 200 200 200 200 200 200 200 - - - - - - - 90 90 90 90 - - - - - - - - - - - - - 200 200 200 200 200 200 200 200 200 200-140-440 140-440 140-S449 140-440 - - 90 90 90 90 90 90 90 90 90 90 90 140-440 140-440 140-S449 140-440 - - 90 90 90 90 90 90 90 90 90 90 90 - - - - - - 200 200 200 200 200 200 200 200 200 200 - - - - - - - 200 200 200 200 200 200 200 200 200 200-140-440 140-440 140-S449 140-440 - - 90 90 90 90 90 90 90 90 90 90 90 - - - - - - 200 200 200 200 200 200 200 200 200 200-140-440 140-440 140-S449 140-440 - - 90 90 90 90 90 90 90 90 90 90 90 140-440 140-440 140-S449 140-440 - - 160 160 160 320 320 320 400 640 640 640 800 Duty Duty - - 140-S449 - - - 110 110 110 160 160 160 210 210 210 210 210 280-440 280-440 280-S449 280-440 - - - - - - 240 240 240 240 240 240 240 140-440 140-440 140-S449 140-440 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 140-440 140-440 140-S449 140-440 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 140-440 140-440 140-S449 140-440 140-440 140-440 90 90 90 90 90 90 90 90 90 90 90 - - 140-S449-140-440-165 165 165 165 165 165 165 165 165 165 165 - - 140-S449-140-440-165 165 165 165 165 165 165 165 165 165 165 140-440 140-440 140-S449 140-440 - - 106 106 106 114 114 204 414 580 1072 1072 1072 140-440 140-440 140-S449 140-440 - - 225 225 225 225 510 760 760 1010 1010 1010 1010 Purpose 140-440 140-440 140-440 140-440 - - 143 173 197 435 602 651 703 872 1033 1033-140-250 140-250 140-250 140-250 - - 157 196 220 470 - - - - - - - - - 140-250 - - - 196 249 273 534 - - - - - - - 140-440 140-440 140-S449 140-440 140-440 140-440 95 95 95 110 110 125 125 125 175 175 175 - - 140-S449-140-440-134 134 134 134 134 165 203 250 308 379 425 140 140 140 140 Standard Standard 30 std std std std std std std std std std 140-250 - - - - 140-250 235 235 235 235 - - - - - - - 140-440 140-440 140-S449 140-440 140-440 140-440 142 142 142 208 208 208 208 360 360 360 360 140-440 140-440 140-S449 140-440 140-440 140-440 115 115 115 115 115 115 115 115 115 115 115 Standard Standard 140-440 Standard 140-440 Standard 150 150 150 150 150 150 200 200 200 200 200 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. 2009-2010 Low Voltage AC Selection and Pricing Guide 8-5 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Overview Description Code Order Code Pos Motor Type / Frame Applicability GP10A GP100A GP10 GP100 RGZP SD10 RGZESD RGZEESD RGZEESDX Lubrication Grease Fitting / Pressure L60 Z - 280-440 280-440 140-S449 280-S449 280-S449 Standard Standard Relief Nameplate Extra M21 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Division 2 4 M22 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Change (Rerate/Derate) Y80 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Auxiliary Y82 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Protective Devices - Windings Thermostats, normally G 15-140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 closed, 2 per motor Rotation Arrow Bidirectional (not K70 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 applicable for unidirectional motors) Clockwise (facing ODE) K71 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Counterclockwise K72 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 (facing ODE) Service Factor Rerate/Derate Y80 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Shaft Seal Slinger & O Ring (4, 6, 8 L76 Z 140-250 280-440 280-440 140-S449 280-S449 280-S449 140-250 280-S449 Pole only) Inpro Seal / DE L79 Z - - - 140-S449 280-S449 280-S449 - - Inpro Seal / ODE L80 Z - - - - - 280-S449 - - Inpro Seal / Both Ends L81 Z - - - - - 280-S449 Standard Standard Software Documentation in D05 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Spanish Certificate of Compliance F00 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Standard F40 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Transmittal Standard Dimension F42 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Sheet Conduit Box Dimension F44 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Sheet Wiring Diagram F45 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 IOM F46 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Renewal Parts F47 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Sheets F49 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 F03 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Space Heater 115V, Single Phase A40 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 230V, Single Phase A41 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 115V, Single Phase, Div 2 A42 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 230V, Single Phase, Div 2 A44 Z - 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Testing Routine Test Report F10 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 - - Routine Test Report with F20 Z 140-250 140-440 280-440 140-S449 280-S449 280-S449 140-S449 280-S449 Vibration Test Voltage Single Voltage - 11 12&13 140-250 75HP 75HP 140-250 - 20HP - - 230V (outside leads connection only) Single Voltage - 460V (outside leads connection only) 12 12&13 140-250 75HP 75HP 140-250 - 20HP - - 1 Sealed Ball bearings not available for 2 pole motors with frames > 360 2 C face with feet for 440 frames, only available with ball bearings 8-6 2009-2010 Low Voltage AC Selection and Pricing Guide 3 Lifting eyebolt is provided as standard except where indicated for 140 Frames

RGZZESD RGZZESD 1D1 RGZESDI RGZZESDI RGZV -ESD -ILESD RGZZV -ESD -ILESD List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 S449 Introduction General Purpose 140-440 140-440 140-S449 140-440 140-440 140-440 125 125 125 125 125 125 125 125 125 125 125 140-440 140-440 140-S449 140-440 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 - - 140-S449-140-440-205 205 205 205 205 205 205 205 205 205 205 140-440 140-440 140-S449 140-440 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 140-440 140-440 140-S449 140-440 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 Standard - 140-S449 Standard 140-440 Standard 150 150 150 150 150 200 200 300 300 370 370 Duty 140-440 140-440 140-S449 140-440 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 140-440 140-440 140-S449 140-440 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 140-440 140-440 140-S449 140-440 140-440 140-440 95 95 95 95 95 95 95 95 95 95 95 Duty 140-440 140-440 140-S449 140-440 140-440 140-440 110 110 110 110 110 110 110 110 110 110 110 140-440 140-440 140-S449 140-440 - - 60 60 60 85 85 115 115 145 145 145 145 - - - - - - 363 363 379 442 458 482 553 679 742 742 742 - - - - - - 363 363 379 442 458 482 553 679 742 742 742 - - - - - - 726 726 758 884 916 964 1106 1358 1484 1484 1484 140-440 140-440 140-S449 140-440 140-440 140-440 0 0 0 0 0 0 0 0 0 0 0 140-440 140-440 140-S449 140-440 140-440 140-440 200 200 200 200 200 200 200 200 200 200 200 140-440 140-440 140-S449 140-440 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 140-440 140-440 140-S449 140-440 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 140-440 140-440 140-S449 140-440 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 140-440 140-440 140-S449 140-440 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 140-440 140-440 140-S449 140-440 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 140-440 140-440 140-S449 140-440 140-440 140-440 30 30 30 30 30 30 30 30 30 30 30 140-440 140-440 140-S449 140-440 140-440 140-440 175 175 175 175 175 175 175 175 175 175 175 140-440 140-440 140-S449 140-440 140-440 140-440 500 500 500 500 500 500 500 500 500 500 500 - - 140-S449-140-440-237 237 237 237 351 351 351 407 407 407 407 - - 140-S449-140-440-237 237 237 237 351 351 351 407 407 407 407 - - 140-S449-140-440-292 292 292 292 436 436 524 640 758 856 856 - - 140-S449-140-440-292 292 292 292 436 436 524 640 758 856 856 140-440 140-440 140-S449 140-440 140-440 140-440 200 200 200 200 200 200 200 200 200 200 200 140-440 140-440 140-S449 140-440 140-440 140-440 400 400 400 400 400 400 400 400 400 400 400 Purpose 20HP - - - 20HP 20HP 85 85 95 110 110 110 140 - - - - 20HP - - - 20HP 20HP 85 85 95 110 110 110 140 - - - - 4 Surface temperature of space heaters will be shown on external surface of motor. CSA certification; Class, Division and T Code required with order. ASD operation, Type RGZESDI is required. 2009-2010 Low Voltage AC Selection and Pricing Guide 8-7 Dimensions

Introduction General Purpose Duty s ALTITUDE TEFC (General Purpose & ) motors with a 1.15 service factor in a 40 C ambient at 3300 feet will operate at a 1.0 service factor in a 40 C ambient at altitudes up to 9900 feet. For altitudes greater than 9900 feet, please consult Siemens. Standard motors will operate at their rated service factor at altitudes above 3300 feet at the corresponding ambient temperatures as shown in the following table. AMBIENT TEFC (General Purpose & ) motors with a 1.15 service factor in a 40 C ambient at 3300 feet will operate at a 1.0 service factor at 3300 feet altitude up to a 65 C ambient. For ambients greater than 65 C or below -25 C, please consult Siemens. Maximum Altitude Feet Ambient Temperature (ºC) 3300 40 6600 30 Duty Purpose ASSEMBLY - Mounting & Terminal Box Position can be furnished in assemblies shown. Modifications will be of F-1 assembly stock motors. When motors are ordered according to a particular mounting, bearing brackets are assembled and grease fittings are properly installed for operation with the motor in the position shown. However, no attempt is made to locate fittings on any particular side of the motor. CAUTION: ** Horizontal ball bearing motors assembly W-5, W-6, W-7 and W-8 are not suitable for external thrust in excess of the weight of the rotor and half-coupling. CONDUIT BOX - AUXILIARY Condulet to Main Box Dimensions HARDWARE Stainless steel hardware, limited to bearing housing bolts, terminal housing bolts, and breather drains only. HAZARDOUS DUTY - RERATE Motor type RGZZESD (Class I, Group D, Class II, Groups F & G, Division 1) with 1.0 service factor can be re-nameplated to RGZZESD (Class I, Group D, Division 1) with 1.15 service factor for 140-250 frame motors only. NAMEPLATES Division 2 Non hazardous duty motors can be used in Class I and Class II Division 2 areas provided no arcing devices are used. Advise ignition temperature or T-code and Class with requests. ODP motors not available for application in Division 1 or Division 2 areas. Non (agency) certified, general purpose and severe duty motors are available with the following metal tag: 8-8 2009-2010 Low Voltage AC Selection and Pricing Guide MOTOR MEETS, DURING NORMAL OPERATION, THE DEFINITION IN THE NATIONAL ELECTRICAL CODE 2005-501-125(B) FOR MOTORS PERMITTED TO BE INSTALLED IN CLASS I, DIVISION 2 AREAS. NATIONAL ELECTRICAL CODE REQUIREMENTS AND RESTRICTIONS MUST BE OBSERVED. 51518308001

s Frequency Change The following tabulation shows the synchronous speeds for 60 and 50 hertz. For different frequencies or adjustable frequency applications, contact Siemens. To derate a continuous duty 60 hertz motor to a continuous 50 hertz motor, use the modifiable list price of the next larger HP 60 hertz motor and add the list price as shown in the table. Motor will be Class F, 1.15 service factor. Speed (RPM) No. of Poles 60 Hertz 50 Hertz 2 3600 3000 4 1800 1500 6 1200 1000 8 900 750 Introduction General Purpose SERVICE FACTOR For non-standard service factor, contact Siemens. Refer to Duty for rerating RGZZESD motors from the standard 1.0 service factor to a 1.15 service factor. SPACE HEATERS Leads marked H1 & H2 List price addition covers space heaters installed in motors with leads terminated in the main conduit box. NEC (2005) requires any Division 2 motor that is not agency certified and is a general purpose non-explosion enclosure to permanently mark on a visible nameplate on the motor surface the max surface temp based on 40 C ambient - this plate will show 200 C. CAUTION: Use in Division 2 areas with iginition temperatures below 250 C (250 x.80 = 200) should be avoided. [Reference: 501-8(b)]. SOFTWARE D05 Documentation in Spanish Duty Duty Purpose F00 F40 F42 F44 F45 F46 F47 F49 Certificate of Compliance, Copy of original customer P.O. must accompany order Standard Transmittal and certification sheet, including motor description and nameplate data Standard Tabulated Dimension Sheet Standard Conduit Box Dimension Sheet Standard wiring/coonection diagram Standard operation and maintanence bulletins Standard renewal parts bulletin for standard construction Standard Tabulation performance data sheets with typical data; only 460V 60HZ F03 TESTING All Siemens motors are given a routine line test per NEMA MG1 and IEEE-112. Vibration data is NOT recorded with a routine test. If required, please add. Test report of routine test is based on IEEE Std. 112 Form A-1 and includes complete nameplate information. Standard curves, single page format includes curves of speed vs. torque, amps, horspower vs power factor, efficiency, amps, speed; based on typical data ROUTINE TEST Routine test consists of the following items tested in accordance with IEEE standard 112. No Load Current No Load Speed Locked-Rotor Current Winding Resistance High Potential Bearings/Vibration Check 2009-2010 Low Voltage AC Selection and Pricing Guide 8-9 Dimensions

Introduction General Purpose Duty Duty Purpose Accessories BASES SLIDE BASS - Shippped loose Base Description Frame List Price Adder $ Lead Time (Days) Single Adjustment Slide CP-839-481-120 143T 83 5 CP-839-481-121 145T 83 5 CP-839-481-122 182T 83 5 CP-839-481-123 184T 83 5 CP-839-481-124 213T 93 5 CP-839-481-125 215T 93 5 Double Adjustment Slide CP-839-481-156 254T 170 5 CP-839-481-157 256T 170 5 CP-839-481-158 284t 190 5 CP-839-481-159 286T 190 5 CP-839-481-160 324T 250 5 CP-839-481-161 326T 250 5 CP-839-481-162 364T 290 5 CP-839-481-132 365T 290 5 CP-839-481-133 404T 585 5 CP-839-481-150 405T 585 5 CP-839-481-151 444T 650 5 CP-839-481-152 445T 650 5 CP-839-481-153 447T 870 5 CP-839-481-155 449T 870 5 Dimensions ADAPTER BASES (RG Only) - Shipped loose Old Frame Base Adapter New Frame List Price Adder $ CP-839-481-101 182U-184U 143T-145T 168 5 CP-839-481-102 213U-215U 182T-184T 168 5 CP-839-481-103 254U-256U 213T-215T 168 5 CP-839-481-104 284U-286U 254T-256T 168 5 CP-839-481-105 324S 284TS 192 5 CP-839-481-106 324S-326S 284-TS-286TS 192 5 CP-839-481-107 324U-326U 284T-286T 192 5 CP-839-481-110 364U-365U 324T-326T 224 5 CP-839-481-108 364US-365US 324TS 224 5 CP-839-481-109 365US 326TS 224 5 CP-839-481-111 404U-405U 364T-365T 304 5 CP-839-481-112 404US-405US 364TS-365TS 304 5 CP-839-481-116 444U-445U 364T-365T 368 5 CP-839-481-113 444U-445U 404T-405T 304 5 CP-839-481-115 444US-445US 364T-365T 368 5 CP-839-481-117 444US-445US 364TS-365TS 368 5 CP-839-481-114 444US-445US 404TS-405TS 304 5 * If special adapter base is required, refer to Factory for price and shipment Lead Time (Days) 8-10 2009-2010 Low Voltage AC Selection and Pricing Guide

Options All Options selected from this section will require a custom built motor. Please contact Siemens for delivery time. Introduction General Purpose Definitions: See Page 5-2. Ordering Instructions: 1. Select stock motor from Sections 2 thru 4. (Note ) 2. Verify applicability of desired Option(s). (Per motor type & frame on pages 6-2 to 6-9) 3. Select applicable Options(s). (Note Order Code, Order Code Position and List Price Adder from pages 6-2 to 6-9) 4. Construct new and List Price. (See examples) a. If the Option Order Code Position is 12, 13, 14, 15 or 16, replace the figure(s) or letter(s) at the same position in the stock motor with the Option Order Code. b. If the Option Order Code Position is Z, add a '-Z' to the end of the stock motor. Then add a '+' sign followed by the Option Order Code. Duty Duty Options can be combined with s from Section 5. Please contact Siemens for delivery time. See Example below. Options combined with Motor Pricing Example: Purpose 15HP, 1800RPM, 208-230/460V, 254T,, D-flange with feet, PTC thermistors (3 embedded temperature sensors for tripping) with condulet to main box and Class H insulation. Base List Price: $1,440 1LE23112BB114AA3 List Price Adders: D-Flange with Feet $534 Order Code F, Order Code Position 14 ( from Section 5) PTC Thermistors $150 Order Code B, Order Code Position 15 Condulet to Main Box $165 Order Code J02, Order Code Position Z Class H Insulation $105 Order Code C00, Order Code Position Z Total List Price: $2,394 New - 1LE23112BB114FB3-Z +J02 +C00 Delivery: Please contact Siemens for delivery 2009-2010 Low Voltage AC Selection and Pricing Guide 9-1 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Options Overview Description Code Order Code Pos 9-2 2009-2010 Low Voltage AC Selection and Pricing Guide GP10A GP100A Motor Type / Frame Applicability GP10 GP100 SD10 Assembly - Mounting & Terminal Box Position W-6 4 16-440-440 440-S449 440-S449 W-7 5 16-440 440 440 F-2 2 16 - - S449 S449 Auxiliary boxes 1 Auxiliary conduit box location (Digit 2) Condulet on main box side J 0 Z - 280-440 280-S449 280-S449 Condulet to main conduit box J 2 Z - 140-440 140-S449 140-S449 Auxiliary conduit box to main conduit box J 3 Z - 280-440 280-S449 280-S449 Condulet - opposite of main conduit box side J 4 Z - 180-440 180-S449 180-S449 Auxiliary box - opposite of main conduit box side J 5 Z - 280-440 280-S449 280-S449 XP condulet - opposite of main conduit box side J 6 Z - - - Temperature detector device (Digit 1) Select the number that corresponds with the appropriate Temperature DetectorDevice to create your initial 3 digital ordering code. Thermistors 0 Thermostats 1 KTY 84 Thermistor 2 Space heaters 5 Stator RTD s to auxiliary conduit box J35-280-440 280-S449 280-S449 of opposite of main box side Balance Precision M69 Z - 140-440 140-S449 Standard Extra Precision M70 Z - 140-440 140-S449 140-S449 Bearings Roller Instead of Ball L65 Z - - 280-400 280-400 Insulated L66 Z - 280-440 140-S449 - Insulated - ODE only L67 Z - 280-440 140-S449 - Couplings er Supplied H10 Z - 140-440 140-S449 140-S449 Encoder - Single Output - TEFC Avtron M3 1024 PPR G00 Z - - - - Avtron M4 1024 PPR G01 Z - - - - Avtron M56 1024 PPR G02 Z - - - - Avtron M85 1024 PPR G03 Z - - - - BEI HS35 1024 PPR G04 Z - - - - Dynapar HS35 1024 PPR G05 Z - - - - Northstar 8500 1024 PPR (210-360) G06 Z - - - - Northstar 8500 1024 PPR (400-440) G07 Z - - - - Northstar SL56 1024 PPR G08 Z - - - - Avtron HS35A G09 Z - - - - Encoder - Special Special Y75 Z - - - - Export Packaging Sea Freight - Siemens Standard B09 Z - - - - Special B10 Z 140-250 140-440 140-S449 140-S449 Fans Bronze M10 Z - 140-440 140-S449 140-S449 Duty Group C&D, 1.15SF M81 Z - - - - Group C&D, F&G, 1.0SF Only M82 Z - - - - Insulation Class H C00 Z - 140-440 140-S449 140-S449 Vacuum Pressure Impregnation (VPI) C01 Z - 140-440 140-S449 140-S449 Moisture/Powerhouse (extra dip & bake) C04 Z - 140-440 140-S449 140-S449 Tropicalization Moisture (extra dip & bake, fungus spray) C08 Z - 140-440 140-S449 140-S449 1 Condulet or Auxiliary box to Main only available for GP motors when ordered with Cast Iron Terminal Box For availability on Flanges and End shields as Options see page 9-14

RGZZESD RGZZESD 1D1 RGZESDI RGZZESDI RGZV -ESD -ILESD List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 S449 Introduction General Purpose 140-440 140-440 440-S449 140-440 - - - - - - - - 140 140 140 140 140-440 140-440 440-S449 140-440 - - - - - - - - 200 200 200-140-440 140-440 - 140-440 - 200 200 200 200 200 200 200 200 200 200 - - - - - - - - - - 165 165 165 165 165 165 165 - - - - 140-440 165 165 165 165 165 165 165 165 165 165 165 - - - - - - - - - 291 291 291 291 291 291 291 - - - - - 165 165 165 165 165 165 165 165 165 165 - - - - 280-440 165 165 165 165 291 291 291 291 291 291 291 280-440 280-440 - 280-440 - 400 400 400 400 400 400 400 Duty - - - - 280-440 - - - - 291 291 291 291 291 291 291 140-440 140-440 140-S449 140-440 140-440 - 128 128 147 147 167 167 211 211 404 404 140-440 140-440 140-S449 140-440 - - 216 216 228 228 260 260 350 350 450 450 280-400 280-400 280-400 280-400 - - - - - 825 825 825 825 std std std - - 140-S449 - - 765 765 1050 1315 1665 1975 2350 5100 7850 7850 7850 - - 140-S449 - - 385 385 525 660 835 990 1175 2550 3925 3925 5530 140-440 140-440 140-440 140-440 140-440 325 325 325 325 325 325 480 480 480 480 480 - - 140-360 - - 1741 1741 1741 1741 1741 1741 1741 - - - - - - 400-S449 - - - - - - - - - 2346 2346 2346 2346 - - 140-180 - - 1298 1298 - - - - - - - - - - - 210-S449 - - - - 1529 1529 1529 1529 1529 2574 2574 2574 2574 - - 140-S449 - - 1246 1246 1246 1246 1246 1246 1246 1246 1246 1246 1246 - - 140-S449 - - 900 900 900 900 900 900 900 900 900 900 900 - - 210-360 - - - - 4380 4380 4380 4380 4380 - - - - - - 400-S449 - - - - - - - - - 5140 5140 5140 5140 - - 140-180 - - 1400 1400 - - - - - - - - - - - 140-360 - - 875 875 875 875 875 875 875 - - - - - - 140-S449 - - cf cf cf cf cf cf cf cf cf cf cf - - - - 140-440 225 225 225 225 510 760 760 1010 1010 1010-140-440 140-440 140-S449 140-440 140-440 cf cf cf cf cf cf cf cf cf cf cf 140-440 140-440 140-S449 140-440 140-440 418 418 540 575 720 870 910 1014 1400 1400 1400 140-250 - - - - 235 235 235 235 - - - - - - - 140-440 140-440 - 140-440 - 235 235 235 235 235 235 235 235 235 235-140-440 140-440 140-S449 140-440 140-440 82 82 82 105 175 230 294 425 606 1573 1573 140-440 140-440 140-S449 140-440 140-440 1120 1120 1120 1120 1440 1440 1820 2300 2500 2500 3600 140-440 140-440 140-S449 140-440 140-440 105 105 105 137 227 294 373 524 722 1234 1234 140-440 140-440 140-S449 140-440 140-440 146 146 146 189 314 405 510 708 961 1528 1528 2009-2010 Low Voltage AC Selection and Pricing Guide 9-3 Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Options Overview Description Code Order Code Pos GP10A GP100A Motor Type / Frame Applicability GP10 GP100 SD10 Leads / Terminal Blocks Terminal Block - 3 lead only K83 Z - 140-360 140-360 140-360 Leads, Special Cable Length Y85 Z - 140-440 140-S449 140-S449 Lubrication Special Grease (High & Low Temp) (Mobil 28) L57 Z - 140-440 140-S449 140-S449 Special Grease (Mobilith SHC 100) L58 Z - 140-440 140-S449 140-S449 Paint Paint - 3 Part Epoxy (Carboline or Ameron) N01 Z - 140-440 140-S449 140-S449 Paint - 2 Part Epoxy N02 Z - - 140-S449 140-S449 Standard Primer Only N03 Z 140-250 140-440 140-S449 140-S449 Standard Paint, Special Color Y60 Z 140-250 140-440 140-S449 140-S449 Special Paint, Special Color Y61 Z 140-250 140-440 140-S449 140-S449 Protective Devices - Windings PTC thermistors, 3 embedded temperature B 15-140-440 140-S449 140-S449 sensors for tripping PTC thermistors, 6 embedded temperature C 15-140-440 140-S449 140-S449 sensors for alarm and tripping KTY84-130, 2 embedded temperature sensors F 15-140-440 140-S449 140-S449 Thermocouples, coil head J 15-360-440 360-S449 360-S449 Winding temperature protection, Stator RTD's (coil head, K 15-360-440 360-S449 360-S449 1 per phase), 100Ω Platinum, complete with auxiliary box with terminal strip opposite to main box Protective Devices - Bearings Bearing thermal protection, Bearing RTDs with connection A51 Z - 400-440 400-S449 400-S449 head and terminal block - both ends, 100Ω Platinum Shafts Carbon Steel (C4140) M57 Z - - 400-S449 400-S449 Shaft DE Special to er Specifications Y50 Z - 140-440 140-S449 140-S449 Shaft ODE Special to er Specifications Y51 Z - 140-250 140-S449 140-S449 NEMA Standard Short Shaft - ODE M53 Z - 140-250 140-S449 140-S449 NEMA Standard Long Shaft - ODE M52 Z - 140-250 140-S449 140-S449 Shaft Grounding Brush Shaft Grounding Brush L29 Z - - - - Shaft Seal Brass Seal L84 Z - - - - Software Nonstandard Dimension Sheet F43 Z 140-250 140-440 140-S449 140-S449 er Specific Sheets F50 Z 140-250 140-440 140-S449 140-S449 Special Calculated F07 Z 140-250 140-440 140-S449 140-S449 1 Condulet or Auxiliary box to Main only available for GP motors when ordered with Cast Iron Terminal Box Dimensions 9-4 2009-2010 Low Voltage AC Selection and Pricing Guide

RGZZESD RGZZESD 1D1 RGZESDI RGZZESDI RGZV -ESD -ILESD List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 S449 Introduction General Purpose - - 140-360 - 140-360 150 150 150 225 225 330 330 - - - - - - 140-S449-140-440 cf cf cf cf cf cf cf cf cf cf cf 140-440 140-440 140-S449 140-440 140-440 325 600 600 600 600 825 825 1100 1100 1100 1100 140-440 140-440 140-S449 140-440 140-440 225 225 225 225 225 425 425 425 425 425 425 140-440 140-440 140-S449 140-440 140-440 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 3750 140-440 140-440 140-S449 140-440 140-440 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 1875 140-440 140-440 140-S449 140-440 140-440 385 385 385 385 385 385 385 385 385 385 385 140-440 140-440 140-S449 140-440 140-440 385 385 385 385 385 385 385 385 385 385 385 140-440 140-440 140-S449 140-440 140-440 cf cf cf cf cf cf cf cf cf cf cf 140-440 140-440 140-S449 140-440 140-440 425 425 425 425 425 425 425 425 425 425 425 140-440 140-440 140-S449 140-440 140-440 850 850 850 850 850 850 850 850 850 850 850 140-440 140-440 140-S449 140-440 140-440 658 658 658 658 658 658 658 658 658 658 658 360-440 360-440 360-440 360-440 360-440 - - - - - - 1186 1186 1186 1186 1186 360-440 360-440 360-S449 360-440 360-440 - - - - - - 1996 1996 1996 1996 1996 - - 400-S449-400-440 - - - - - - - 2200 2200 2200 2200 Duty Duty Purpose 400-440 400-440 400-S449 400-440 400-440 - - - - - - - 2975 3190 3365 3365 140-440 140-440 140-S449 140-440 140-440 cf cf cf cf cf cf cf cf cf cf cf 140-440 140-440 140-S449 140-440 - cf cf cf cf cf cf cf cf cf cf cf 140-440 140-440 140-S449 140-440 - 91 91 91 122 185 266 301 333 368 368 368 140-440 140-440 140-S449 140-440 - 91 91 91 122 185 266 301 333 368 368 368 - - 140-S449 - - 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 140-440 140-440 - 140-440 - 42 42 42 44 59 72 87 102 102 102-140-440 140-440 140-S449 140-440 140-440 350 350 350 350 350 350 350 350 350 350 350 140-440 140-440 140-S449 140-440 140-440 350 350 350 350 350 350 350 350 350 350 350 140-440 140-440 140-S449 140-440 140-440 850 850 850 850 850 850 850 850 850 850 850 2009-2010 Low Voltage AC Selection and Pricing Guide 9-5 Dimensions

Introduction General Purpose Duty Duty Options Overview Description Code Order Code Pos GP10A GP100A Motor Type / Frame Applicability GP10 GP100 SD10 Space Heater 115V, Single Phase, Ex. Proof A43 Z - - - - Terminal Box - Main Cast Iron Instead of Cast Aluminum or Steel L01 Z - 140-400 - - Testing Routine Test Report - (Witnessed) F12 Z 140-250 140-440 140-S449 - Complete Test F15 Z 140-250 140-440 140-S449 140-S449 Complete Test (Witnessed) F17 Z 140-250 140-440 140-S449 140-S449 Calibration Test F27 Z 140-250 140-440 140-S449 140-S449 Electrical Duplicate - (Routine Test) F36 Z 140-250 140-440 140-S449 140-S449 Electrical Duplicate (Complete Test) F37 Z 140-250 140-440 140-S449 140-S449 Noise F30 Z 140-250 140-440 140-S449 140-S449 Noise (Witnessed) F32 Z 140-250 140-440 140-S449 140-S449 Routine Test Report with Vibration Test (Witnessed) F22 Z 140-250 140-440 140-S449 140-S449 Vertical Jacking Vertical Jacking Provision M39 Z - 280-440 280-S449 280-S449 Vibration Detectors Vibraswitch Robert Shaw malfunction detector Model A66 Z - - 280-S449 280-S449 366 - D8 120VAC Provision for vibration sensors (PMC/Beta) on A67 Z - - 280-S449 280-S449 D.E. & O.D.E Voltage Special Voltage 200-460V 9-0 + M1Y 12,13+Z 140-250 140-440 140-S449 140-S449 Special Voltage 461-600V 9-0 + M2Y 12,13+Z 140-250 140-440 140-S449 140-S449 Part Winding Start - 200V, 60Hz 20 12&13-280-360 280-360 280-360 Part Winding Start - 230V, 60Hz 21 12&13-280-360 280-360 280-360 Part Winding Start - 460V, 60Hz 22 12&13-280-440 280-S449 280-S449 Part Winding Start - 575V, 60Hz 23 12&13-280-440 280-S449 280-S449 Wye Start - Delta Run - 200V, 60Hz 30 12&13-280-360 280-360 280-360 Wye Start - Delta Run - 230V, 60Hz 31 12&13-280-360 280-360 280-360 Wye Start - Delta Run - 460V, 60Hz 32 12&13-280-440 280-S449 280-S449 Wye Start - Delta Run - 575V, 60Hz 33 12&13-280-440 280-S449 280-S449 1 Condulet or Auxiliary box to Main only available for GP motors when ordered with Cast Iron Terminal Box Dimensions Purpose 9-6 2009-2010 Low Voltage AC Selection and Pricing Guide

RGZZESD RGZZESD 1D1 RGZESDI RGZZESDI RGZV -ESD -ILESD List Price Adder Per Frame ($) 143 182 213 254 284 324 364 404 444 447 145 184 215 256 286 326 365 405 445 449 S449 Introduction General Purpose 140-440 140-440 - 140-440 - 292 292 292 292 436 436 524 640 758 856 - - - - - - 115 120 125 130 140 155 170 195 - - - 140-440 140-440 140-S449 140-440 140-440 1100 1100 1100 1100 1100 1320 1500 1720 1860 2420 3040 140-440 140-440 140-S449 140-440 140-440 4560 4560 4560 4560 4560 5300 6480 7400 8040 8960 13520 140-440 140-440 140-S449 140-440 140-440 6840 6840 6840 6840 6840 7960 9720 11100 12060 13440 20280 140-440 140-440 140-S449 140-440 140-440 3420 3420 3420 3420 3420 3975 4860 5550 6030 6720 10140 140-440 140-440 140-S449 140-440 140-440 200 200 200 200 200 200 200 200 200 200 200 140-440 140-440 140-S449 140-440 140-440 300 300 300 300 300 300 300 300 300 300 300 140-440 140-440 140-S449 140-440 140-440 2800 2800 2800 2800 2800 2800 3600 3600 3600 3600 3600 140-440 140-440 140-S449 140-440 140-440 4400 4400 4400 4400 4400 4400 5200 5200 5200 5200 5200 140-440 140-440 140-S449 140-440 140-440 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 280-440 280-440 280-S449 280-440 - - - - - 600 600 600 600 600 600 600 280-440 280-440 280-S449 280-440 280-440 - - - - 2650 2650 2650 3250 3250 3250 3250 - - 280-S449-280-440 - - - - 2375 2375 2375 2875 2875 2875 2875 140-440 140-440 140-S449 140-440 140-440 81 81 81 112 134 323 366 479 796 979 979 140-440 140-440 140-S449 140-440 140-440 81 81 81 112 134 323 366 479 796 979 979 280-360 280-360 280-360 280-360 280-360 - - - - 104 126 185 - - - - 280-360 280-360 280-360 280-360 280-360 - - - - 104 126 185 - - - - 280-440 280-440 280-S449 280-440 280-440 - - - - 104 126 185 290 482 506 506 280-440 280-440 280-S449 280-440 280-440 - - - - 104 126 185 290 482 506 506 280-360 280-360 280-360 280-360 280-360 - - - - 104 126 185 - - - - 280-360 280-360 280-360 280-360 280-360 - - - - 104 126 185 - - - - 280-440 280-440 280-S449 280-440 280-440 - - - - 104 126 185 290 482 506 506 280-440 280-440 280-S449 280-440 280-440 - - - - 104 126 185 290 482 506 506 Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 9-7 Dimensions

Introduction General Purpose Duty Duty Purpose Options s BALANCE All motors are dynamically balanced to commercial limits measure in accordance with NEMA MG1-12.06. Modified motors can be built to exceed standard commercial limits based on Table 1 below. BALANCE LIMITS MAXIMUM AMPLITUDE, INCHES, PEAK TO PEAK NEMA Balance Standard Precision Extra Precision RPM 143T 143T 364T 143T 284T 364T 449T 326T 449T 256T 326T 449T mils P/P mils P/P mils P/P 0-999 2.5 0.5 0.75 0.2 0.3 0.4 1000-1999 2.0 0.5 0.75 0.2 0.3 0.4 2000-2999 1.5 0.5 0.75 0.2 0.3 0.4 3000-4000 1.0 0.5 0.75 0.2 0.3 0.4 VELOCITY, INCHES INCHES/SECOND Balance NEMA Standard Precision Extra Precision RPM 143T 143T 364T 143T 284T 364T 449T 326T 449T 256T 326T 449T in/sec in/sec in/sec 0-999 0.131 0.026 0.039 0.105 0.016 0.021 1000-1999 0.209 0.052 0.079 0.021 0.031 0.042 2000-2999 0.236 0.079 0.118 0.031 0.047 0.063 3000-4000 0.209 0.105 0.157 0.042 0.063 0.084 NOTE: IN P-P refers to amplitude displacement. NEMA unfiltered velocity limit 0.15 in/s peak. IEEE Std 841 unfiltered velocity limit 0.08 in/s peak. NOTE: For balance limits greater than Precision balance, contact factory. BEARINGS Insulated bearings are only available as sealed bearings. having roller bearings (444T to 449T) require a minimum radial load. Use of these motors in direct connected applications is discouraged to avoid excessive drive end bearing noise and/or reduced bearing life. Dimensions 9-8 2009-2010 Low Voltage AC Selection and Pricing Guide

Options s AUXILIARY BOXES Condulet - On Main Box side Condulet to Main Box Auxiliary Box to Main Box Condulet - Opposite of Main Box Auxiliary Box- Opposite of Main Box Explosion Proof Condulet - Opposite of Main Box PTC Thermistors J00 J02 J03 J04 J05 J06 Thermostats J10 J12 J13 J14 J15 J16 KTY84 Temperature Sensors J20 J22 J23 J24 J25 J26 Space Heaters J50 J52 J53 J54 J55 J56 Introduction General Purpose Duty Duty Purpose CONNECTIONS Part Winding Start - Starting torques are reduced at the motor shaft. Wye Start - Delta Run - Starting torques are reduced at the motor shaft. Standard 50 hertz voltages are 220, 380, 400, 415, 440, 550 and 220/380. Standard 60 hertz voltages are 200, 230, 460, 575 and 230/460. COUPLINGS - er Supplied Rigid couplings, flexible couplings, pinions and V-belt sheaves can be pressed on at List Price adders per the table below. Couplings, pinions or sheaves must be finish bored and key seated to Siemens shaft dimensions and must be shipped to the plant freight prepaid. 2009-2010 Low Voltage AC Selection and Pricing Guide 9-9 Dimensions

Introduction General Purpose Options s ENCODERS Encoder Selection Guide Encoders (also known as tachometers) mount on the motor shaft to provide precise speed and position feedback to the control system. Encoders use two basic technologies: Magnetic/Magneto resistive, and Optical; and two common mounting methods: hollow shaft and modular. Encoder selection should be based on several factors: mechanical service duty, and environment. Duty Duty Purpose Type of Encoder Optical encoders are usually less expensive, but are more vulnerable to shock, vibration, and contamination from dusty, dirty, wet or chemical environments; Siemens recommends magnetic encoders for these environments. Encoder Mounting Hollow shaft / tethered encoders are easier to mount, but are less robust than modular encoders; Siemens recommends modular encoders for rough mechanical service applications. Other mountings technologies, such as solid shaft coupled, are available and may be required for special applications, but are not generally recommended. Call factory for pricing. Encoder Wiring: Encoders may be connected via military connectors (solder connections with screw housing) or industrial connectors (pin connections with terminal strip) Vendor standard connectors shown; call factory for special connectors. Applications Recommended Type Conveying Converting Films Paper Steel Hoist Marine Oil Drilling Light Standard Heavy Darker = Better suited for application. Order Codes Accessory Single Output Dual Output Marker Pulse Shaft Grounding Avtron M3 1024 PPR G00 Y75 Std Y75 Avtron M4 1024 PPR G01 Y75 Std Y75 Avtron M561024 PPR G02 Y75 Std Y75 Avtron M85 1024 PPR G03 Y75 Std Y75 BEI HS35 1024 PPR G04 NA Std Y75 Dynapar HS35 1024 PPR G05 NA Std Y75 Northstar 8500 1024 PPR (210-360) G06 Y75 Y75 Y75 Northstar 8500 1024 PPR (400-440) G07 Y75 Y75 Y75 Northstar SL56 1024 PPR G08 Y75 Y75 Y75 Avtron HS35A G09 NA Std Y75 Dimensions 9-10 2009-2010 Low Voltage AC Selection and Pricing Guide

Options s Encoders can be factory installed at Siemens for RGZESDI and RGZZSDI motors only. Unless specified, all encoders have 1024PPR; other PPR & special voltage output ranges available upon request. Introduction General Purpose NEMA Frame Model Mill Duty Encoder Style List Price Adder $ Optional List Price Adder $ Connector Single Dual Marker Shaft Style Output Output Pulse Grounding Output (VDC) Totally Enclosed Fan Cooled Avtron M3 Standard Optical Hollow Shaft 1741 2529 Std 420 Industrial 5-24 E Avtron M56 Heavy Magnetic Modular 1298 1911 Std cf Industrial 5-24 C 143-184 Avtonr HS35A Light Optical Hollow Shaft 875 NA Std cf Military 5-24 E BEI HS35 Light Optical Hollow Shaft 1246 NA Std cf Military 5-24 E Dynapar HS35 Light Optical Hollow Shaft 900 NA Std cf Military 5-24 E Northstar SL56 Heavy Magnetic Modular 1400 2550 66 cf Industrial 5-15 C Avtron M3 Standard Optical Hollow Shaft 1741 2529 Std 420 Industrial 5-24 E Avtron M85 Heavy Magnetic Modular 1529 2253 Std cf Industrial 5-24 C 213-365 Avtonr HS35A Light Optical Hollow Shaft 875 NA Std cf Military 5-24 E BEI HS35 Light Optical Hollow Shaft 1246 NA Std cf Military 5-24 E Dynapar HS35 Light Optical Hollow Shaft 900 NA Std cf Military 5-24 E Northstar 8500 Heavy Magnetic Modular 4380 5381 327 972 Industrial 5-15 F Avtron M4 Heavy Magnetic hollow Shaft 2346 3380 Std 458 Industrial 5-24 E Avtron M85 Heavy Magnetic Modular 2574 3002 Std cf Industrial 5-24 C 400-S449 BEI HS35 Light Optical Hollow Shaft 1246 NA Std cf Military 5-24 E Dynapar HS35 Light Optical Hollow Shaft 900 NA Std cf Military 5-24 E Northstar 8500 Heavy Magnetic Modular 5140 6441 327 972 Industrial 5-15 D Figure Duty Duty Purpose NEMA Frame Model Mill Duty Encoder Style List Price Adder $ Optional List Price Adder $ Connector Single Dual Marker Shaft Style Output Output Pulse Grounding Output (VDC) Totally Enclosed Blower Cooled Avtron M4 Heavy Magnetic hollow Shaft 2503 3451 Std 420 Industrial 5-24 B Avtron M56 Heavy Magnetic Modular 1646 2260 Std cf Industrial 5-24 B 254-256 Avtonr HS35A Light Optical Hollow Shaft 1245 NA Std cf Military 5-24 B BEI HS35 Light Optical Hollow Shaft 1616 NA Std cf Military 5-24 B Dynapar HS35 Light Optical Hollow Shaft 1270 NA Std cf Military 5-24 B Northstar SL56 Heavy Magnetic Modular 1734 2884 66 cf Industrial 5-15 B Avtron M4 Heavy Magnetic hollow Shaft 2731 3765 Std 458 Industrial 5-24 B 213-365 Avtron M85 Heavy Magnetic Modular 2196 2657 Std cf Industrial 5-24 B BEI HS35 Light Optical Hollow Shaft 1616 NA Std cf Military 5-24 B Northstar 8500 Heavy Magnetic Modular 4767 5381 327 973 Industrial 5-15 B Dynapar HS35 Light Optical Hollow Shaft 1270 NA Std cf Military 5-24 B 284-365 Avtonr HS35A Light Optical Hollow Shaft 1245 NA Std cf Military 5-24 B Northstar SL56 Heavy Magnetic Modular 1734 2884 66 cf Industrial 5-15 B Avtron M4 Heavy Magnetic hollow Shaft 2348 3382 Std 458 Industrial 5-24 B 324-365 Avtron M85 Heavy Magnetic Modular 2340 3002 Std cf Industrial 5-24 B 400-S449 Northstar 8500 Heavy Magnetic Modular 5140 6441 327 973 Industrial 5-15 B Figure 2009-2010 Low Voltage AC Selection and Pricing Guide 9-11 Dimensions

Introduction General Purpose Duty Options s HAZARDOUS DUTY MOTORS Class I: Gr. B Gr. C Gr. D Class II: Gr. E Gr. F Gr. G Hydrogen (not available). Atmospheres containing ethyl and ether vapor. Atmospheres containing gasoline, petroleum, naphtha, alcohols, acetone lacquer solvent vapors and natural gas. Atmospheres containing metal dust. Atmospheres containing carbon black, coal or coke dust. Atmospheres containing grain dust. Motor type RGZZESD (Class I, Groups C & D, Division 1) with 1.0 service factor can be rerated to RGZZESD (Class I, Groups C & D, Division 1) with 1.15 service factor for 140-250 frame motors only. Duty Motor type RGZZESD (Class I, Groups C & D, Division 1) with 1.0 service factor can be rerated to RGZZESD (Class I, Groups C & D, Class II, Groups F & G, Division 1) with 1.0 service factor. LUBRICATION Purpose Provisions for Oil Mist - Convert a motor built with grease lubricated bearings to one that can be converted to oil-mist lubricated bearings at a future date. Siemens does not supply the oil mist system, reclassified orifice, details of flow rate or oil-air ratios. Such information must be obtained from the oil-mist vendor. Oil Mist Ready - Convert a motor built with grease lubricated bearings to oil mist lubricated bearings for immediate use. Siemens does not supply the oil mist system, reclassified orifice, details of flow rate or oil-air ratios. Such information must be obtained from the oil-mist vendor. PAINT Siemens standard finish paint consists of the following: Epoxy modified acrylic air dry enamel. Viscosity: 28-30 seconds No.2 Zahn cup @ 77 F Fineness: 7 N.S. units Hegeman gage Adhesion: 90% Cross-hatch test (tape) Impact resistance: 40 inch pounds direct - No cracks Composition: Lead and Chromate free Color: RAL 7030 stone gray PROTECTIVE DEVICES WINDING PROTECTION Control Modules are available for thermistors. Order Code A90. Add $450 List. Shipped loose for customer installation. Price does not include temperature readout devices. Contact factory for other resistance values. Thermistors - leads marked PM1 & PM2 BEARING PROTECTION Price does not include temperature readout devices. Contact factory for other resistance values. Dimensions 9-12 2009-2010 Low Voltage AC Selection and Pricing Guide

Options s SHAFTS Standard dimensions are shown in the Dimensions section. The following opposite drive end standard double-end shafts are available as custom built motors. Shaft dimensions not shown should be referred to your Siemens Representative for quotation. Double-End Shafts, Standard Steel - Drive End Standard - Opposite Drive End as Follows Order Code - M53 NEMA Standard Short Shaft Order Code - M52 NEMA Standard Long Shaft Frame FU Key FN-FW FV Key Length FN-FW FV Key Length 143-145T 0.625 0.188 - - - 162 1.38 0.91 182-184T 0.875 0.188 - - - 2.25 2.00 1.41 213-215T 1.125 0.25-0.25 - - - 2.75 2.50 1.75 254-156T 1.375.312-.312 - - - 3.37 3.12 2.37 284-286T 1.625.375-.375 3.25 3 1.87 4 3.75 2.87 324-326T 1.875.50-.50 3.75 3.50 2 4.62 4.37 3.25 364-365T 1.875.50-.50 3.75 3.50 2 4.62 4.37 3.25 404-405T 2.125.50-.50 4.25 4 2.75 5.25 5 3.87 444-449T 2.375.625-.625 4.75 4.50 3 5.87 5.62 4.25 Introduction General Purpose Duty Duty TESTING COMPLETE TEST Complete test consists of the following items tested in accordance with NEMA and IEEE-112 test standards. Full Load Heat Run Temperature Rise at F.L. Winding Resistance Rated F.L. Slip No Load Current Breakdown Torque Locked Rotor Torque-Amps High Potential Tests Efficiencies @ 100, 75, 50 Percent Load Power Factor @ 100, 75, 50 Percent Load Test report of complete test is based on IEEE Std. Form A-2 and includes complete nameplate information. CALIBRATION TESTS Calibration test consists of 0-125% rated load test measurement of speed, torque, current, power factor and efficiency, at rated voltage. is curve rated voltage. is curve plotted, on Siemens standard format. Foot mounted motors only. SPECIAL TESTS For tests or reporting format other than those listed below, contact Siemens with complete specification, for price additions. ers will be notified approximately 2 weeks before witnessed testing. Refer to Siemens for prices of test reports for adjustable speed drives. Multispeed motor test reports are priced based upon the number of speeds tested. List prices are at the following percentage of the single speed price: One speed tested 100% Two speeds tested 150% Pricing: Five copies of each test report are provided on 8.5" x 11" paper suitable for reproduction. Additional copies are available for $35 List per copy. Purpose VERTICAL JACKING PROVISIONS This option is provided on foot mounted motors only. It is used to assist the installer in proper alignment of the motor shaft with the driven piece of equipment for shimming purposes. Siemens will provide the tapped hole (one per foot), four per motor. A 1/2-13 UNC threaded hole will be provided on 280T frame, a 3/4-10 UNC threaded hole on 320T-360T and a 7/8-14 UNF threaded hole on 400T-440T frames. The customer is responsible for providing the bolts. 2009-2010 Low Voltage AC Selection and Pricing Guide 9-13 Dimensions

Notes Dimensions Introduction Purpose Duty Duty General Purpose 9-14 2009-2010 Low Voltage AC Selection and Pricing Guide

Technical Notes HP x.746 = kw kw x 1.341 = HP Torque (lb. - ft.) = HP x 520 RPM HP = Torque (lb. - ft.) X RPM 5250 WK2 (Inertia - Lb. Ft.2) at Motor Shaft = (Load RPM Mtr. F.L. RPM)2 x Load WK 2 Inertia (Kilogram - meter 2 ): kgm 2 x 23.73 = lb. ft. 2 (lb. ft. 2 23.73 = kgm 2 ) (lb. ft. 2 x.042 = kgm 2 ) GD2 (kgfm 2 ) x 5.933 = lb. ft 2 kgfm 2 4 = kgm 2 Torque (Newton - meters): Power (Kilowatts): Nm x.7376 = lb. - ft. (lb. ft. x 1.356 = Nm) kw x 1.341 = HP (HP 1.341 = kw) (HP x.746 = kw) Temperature: Deg C = 5/9 ( F - 32) F = (9/5 x C) + 32 Notes: To find amperes at various voltages: 575 V = 460 V Amperes x.80 230 V = 460 V Amperes x 2.0 200 V = 460 V Amperes x 2.3 (Amperes = Full Load, Locked Rotor and No Load Values - from data pages) All other data (kva Code, Efficiencies, Power Factors, Torques and Stall Times) remain same as 460 V (winding connections can change - rarely - with voltage designs). When NEMA Nominal F.L. Efficiency is Then Minimum F.L. Efficiency is 96.5 95.8 96.2 95.4 95.8 95.0 95.4 94.5 95.0 94.1 94.5 93.6 94.1 93.0 93.6 92.4 93.0 91.7 92.4 91.0 91.7 90.2 91.0 89.5 90.2 88.5 89.5 87.5 88.5 86.5 87.5 85.5 86.5 84.0 85.5 82.5 84.0 81.5 82.5 80.0 81.5 78.5 80.0 77.0 78.5 75.5 77.0 74.0 75.5 72.0 74.0 70.0 Introduction General Purpose Duty Duty Purpose General Capabilities For Use With Adjustable Speed Drives Product Line Efficiency Voltage Frame Size Variable Torque Constant Torque GP10A High 208-230/460 143T 256T 3 Hz 60 Hz 15 Hz 60 Hz GP10 High 208-230/460 143T 256T 3 Hz 60 Hz 15 Hz 60 Hz SD10 High 208-230/460 143T 256T 3 Hz 60 Hz 15 Hz 60 Hz GP100A NEMA Premium 208-230/460 143T 256T 3 Hz 60 Hz 15 Hz 60 Hz GP100 NEMA Premium 208-230/460 143T 256T 3 Hz 60 Hz 15 Hz 60 Hz NEMA Premium 208-230/460 143T 256T 3 Hz 60 Hz 15 Hz 60 Hz 230/460 & 460 284T 449T NEMA Premium 460 143T 449T 3 Hz 60 Hz 15 Hz 60 Hz GP100A Exceeds NEMA 208-230/460 143T 256T 3 Hz 60 Hz 6 Hz 60 Hz Premium (Cu rotor) GP100 Exceeds NEMA 208-230/460 143T 256T 3 Hz 60 Hz 6 Hz 60 Hz Premium (Cu rotor) Exceeds NEMA 208-230/460 143T 256T 3 Hz 60 Hz 6 Hz 60 Hz Premium (Cu rotor) Exceeds NEMA Premium (Cu rotor) 460 143T 256T 3 Hz 60 Hz 6 Hz 60 Hz 2009-2010 Low Voltage AC Selection and Pricing Guide 10-1 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose & - TEFC GP10A / GP10 / SD10 HP Synch RPM F.L. RPM Frame No Load Current [A] Full Load 460 Volts, NEMA Design B, 40 C Ambient Lckd Rotor kva/ HP Code Nominal Efficiency (%) Power Factor (%) ½ ¾ Full Load ½ ¾ Full Load Full Load (lb-ft) Torque Lckd Rotor Break- Down High Efficiency LR Stall Time Hot (Sec) Cold (Sec) Winding Conn. 1 3600 3520 143T 0.8 1.4 14 N 75.5 79 80 63 74 81 1.5 4 7 12 16 wye 1 1800 1750 143T 1 1.5 13 M 80 82.5 82.5 53 66 76 3 9 12 15 22 wye 1 1200 1150 145T 1 1.6 9 J 79.5 81 80 53 66 73 4.6 9 14 13 22 wye 1 900 870 182T 1.5 2.1 9 J 71 73 74 36 47 56 6 10 15 50 68 wye 1.5 3600 3490 143T 0.9 2 16 L 81.5 83.5 82.5 69 81 85 2.3 5 9 13 17 wye 1.5 1800 1750 145T 1.4 2.2 20 M 82 84 84 55 69 76 4.5 15 19 12 17 wye 1.5 1200 1170 182T 1.4 2.4 15 K 84 85.5 85.5 52 64 68 6.7 15 28 27 36 wye 1.5 900 865 184T 2.3 3 17 H 74 76.5 77 35 47 56 9.1 20 35 43 63 wye 2 3600 3495 145T 1.2 2.6 23 L 82.5 84.5 84 66 78 85 3 7 12 13 17 wye 2 1800 1740 145T 1.8 3 25 L 83 84.5 84 54 68 77 6 22 27 13 20 wye 2 1200 1170 184T 1.8 3.1 25 K 85 87 86.5 49 61 70 9 20 36 19 26 wye 2 900 870 213T 2 3.3 16 H 78 81.5 82.5 51 63 68 12.1 21 41 22 38 wye 3 3600 3515 182T 1.5 3.7 32 K 83 85.5 85.5 67 80 85 4.5 8 15 30 20 wye 3 1800 1750 182T 2 4 32 K 86.5 88 87.5 59 72 78 9 19 33 15 25 wye 3 1200 1170 213T 2.2 4.2 32 K 86.5 87.5 87.5 57 70 76 14 30 49 16 24 wye 3 900 870 215T 3 4.8 25 H 81 83.5 84 45 59 68 18 36 56 19 31 wye 5 3600 3505 184T 2.3 6.2 46 J 87 88 87.5 72 82 85 7.5 14 30 13 25 wye 5 1800 1735 184T 2.9 6.7 46 J 88.5 88.5 87.5 64 75 79 15 29 48 12 24 wye 5 1200 1165 215T 3.3 6.8 46 J 88 88.5 87.5 62 74 79 23 45 77 13 20 wye 5 900 875 254T 5.5 8.8 33 F 80 85 85.5 43 54 62 30 57 59 65 115 wye 7.5 3600 3520 213T 3.5 9 63 H 86.5 88.5 88.5 75 84 89 11 21 40 16 29 wye 7.5 1800 1750 213T 4.1 9.5 63 H 89.5 90 89.5 66 77 82 23 45 77 15 25 wye 7.5 1200 1175 254T 5.5 11 63 H 88.5 90 89.5 55 68 79 34 54 94 21 37 wye 7.5 900 875 256T 7 13 50 G 82 85 85.5 44 57 62 45 85 89 50 100 wye 10 3600 3515 215T 4 11.5 81 H 90 90.5 89.5 79 86 89 15 28 57 14 27 wye 10 1800 1750 215T 5.7 12.5 81 H 89.5 90 89.5 66 77 82 30 63 108 13 23 wye 10 1200 1175 256T 7 14 81 H 89 90 89.5 58 69 75 45 77 118 15 31 wye 10 900 875 284T 4.0 12 81 H 89.4 90.9 91 50 61 60 60 15 30 delta 15 1200 1175 284T 10.0 18 116 G 90.2 90.9 90.2 57 71 78 67 107 181 20 45 wye 15 1800 1760 254T 8.8 19 116 G 90 91 91 64 75 81 45 103 118 17 40 wye 15 1200 1175 284T 10 20 116 G 91 91.7 91 57 71 77 67 107 181 20 45 delta 15 900 875 286T 11.2 23 116 G 90.1 91.4 91 50 60 67 90 135 198 18 35 delta 20 3600 3515 256T 6.5 23.5 145 G 89 90 90.2 81 87 88 29.9 63 80 18 48 delta 20 1800 1755 256T 11 25 145 G 91.5 91.5 91 66 77 79 59.8 132 150 13 38 delta 20 1200 1175 286T 10.4 26 145 G 92.1 92.4 91.7 62 73 79 89 142 223 19 43 delta 20 900 880 324T 18 31 145 G 90 91.2 91 50 61 67 119 167 238 15 35 delta 25 3600 3525 284TS 8 29 183 G 92 92.2 91.7 80 85 88 37 59 93 16 30 delta 25 1800 1765 284T 7.6 29 183 G 93.2 93.6 93 72 82 87 74 163 207 19 40 delta 25 1200 1180 324T 15 33 183 G 92.2 92.7 92.4 57 69 77 111 189 266 25 50 delta 25 900 880 326T 22 38 183 G 89.2 90.5 90.2 50 61 68 149 224 298 22 40 delta 30 3600 3525 286TS 9.5 34 218 G 92 92.2 91.7 84 89 90 45 72 113 16 30 delta 30 1800 1765 286T 15 35 218 G 93.2 93.6 93 71 82 86 89 196 249 19 40 delta 30 1200 1180 326T 19 39 218 G 92.6 92.9 92.4 58 70 78 134 228 322 25 50 delta 30 900 885 364T 15 47 218 G 89.9 91.3 91 50 62 66 178 267 356 22 40 delta Prices and specifications are subject to change without notice 10-2 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose & - TEFC GP10A / GP10 / SD10 HP Synch RPM Current [A] kva/ F.L. RPM Frame HP No Full Lckd Code Load Load Rotor 460 Volts, NEMA Design B, 40 C Ambient Nominal Efficiency (%) Power Factor (%) ½ ¾ Full Load ½ ¾ Full Load Full Load (lb-ft) Torque Lckd Rotor Break- Down High Efficiency LR Stall Time Hot (Sec) Cold (Sec) 2009-2010 Low Voltage AC Selection and Pricing Guide Winding Conn. 40 3600 3530 324TS 12 45 290 G 94 94.1 93.6 80 87 89 60 90 150 22 45 delta 40 1800 1770 324T 15 47 290 G 94 94.2 93.6 77 82 85 119 226 286 20 40 delta 40 1200 1180 364T 24 52 290 G 93.6 93.9 93.6 59 71 77 178 303 409 29 55 delta 40 900 885 365T 36 63 290 G 90.7 92 91.7 49 60 65 237 356 474 25 40 delta 50 3600 3530 326TS 15 55 363 G 94.1 94.2 93.6 82 89 91 74 111 185 18 37 delta 50 1800 1770 326T 18 58 363 G 94.1 94.2 93.6 77 87 86 148 281 355 20 40 delta 50 1200 1180 365T 30 66 363 G 94 94.2 93.6 60 71 76 223 379 513 29 55 delta 50 900 885 404T 28 67 363 G 92.3 92.4 91.7 64 73 76 297 416 594 25 40 delta 60 3600 3565 364TS 19 68 435 G 93.8 94.1 93.6 80 86 88 89 142 223 16 28 delta 60 1800 1775 364T 21 71 435 G 93.9 94.1 93.6 74 82 85 178 285 427 22 45 delta 60 1200 1185 404T 26 74 435 G 94.1 94.5 94.1 70 78 81 266 399 532 25 50 delta 60 900 885 405T 30 78 435 G 92.3 92.4 91.7 67 76 79 356 498 712 30 35 delta 75 3600 3565 365TS 22 85 543 G 94.3 94.5 94.1 81 86 88 111 178 289 16 27 delta 75 1800 1775 365T 27 87 543 G 94.4 94.6 94.1 74 83 85 222 344 533 22 45 delta 75 1200 1185 405T 34 93 434.4 G 94.7 94.9 94.5 68 77 80 332 498 664 33 45 delta 75 900 885 444T 37 94 543 G 92.9 93.3 93 67 76 80 445 601 890 25 32 delta 100 3600 3570 405TS 19 108 725 G 94.6 94.7 94.1 90 92 92 147 176 294 25 45 delta 100 1800 1780 405T 30 113 725 G 95 95.2 94.5 80 85 87 295 472 590 25 35 delta 100 1200 1185 444T 38 117 725 G 94.7 94.9 94.5 75 82 85 443 620 886 30 35 delta 100 900 885 445T 48 123 725 G 94.1 94.2 94.1 70 78 81 593 771 1186 22 30 delta 125 3600 3575 444TS 32 138 908 G 94 94.6 94.5 85 89 89 184 221 368 18 23 delta 125 1800 1785 444T 42 143 908 G 95.1 95.3 95 78 84 86 368 589 736 20 25 delta 125 1200 1185 445T 44 144 908 G 94.7 94.9 94.5 77 84 86 554 776 1108 25 35 delta 125 900 885 447T 54 152 908 G 94.1 94.2 93.6 70 79 82 742 965 1484 20 30 delta 150 3600 3575 445TS 37 164 1085 G 94.8 95.2 95 84 89 90 220 264 440 15 18 delta 150 1800 1785 445T 45 170 1085 G 95.7 96 95.8 80 85 86 441 662 882 20 30 delta 150 1200 1185 447TS 45 170 1085 G 95.4 95.6 95 81 86 87 665 831 1330 28 43 delta 150 900 885 447T 72 186 1085 G 94.1 94.5 94.1 67 76 80 890 1157 1780 20 25 delta 200 3600 3575 447TS 40 216 1450 G 94.9 95.2 95 88 90 91 294 353 588 16 20 delta 200 1800 1785 447T 60 225 1450 G 96 96.1 95.8 81 86 87 588 882 1176 18 25 delta 200 1200 1185 449T 55 226 1450 G 95.4 95.5 95 82 86 87 886 1108 1772 25 32 delta 200 900 885 449T 101 241 1450 G 94.5 94.8 94.5 71 79 82 1186 1483 2372 15 25 delta 250 3600 3570 449TS 45 267 1825 G 95.3 95.6 95.4 90 92 92 368 442 736 12 18 delta 250 1800 1785 449TS 78 281 1825 G 95.8 96 95.8 80 85 87 735 1029 1470 18 25 delta 250 1200 1185 449T 75 280 1825 G 95.5 95.5 95 82 87 88 1108 1330 2216 20 25 delta 250 900 885 S449LS 111 303 1825 G 94.5 94.8 94.5 70 78 82 1483 1557 2966 25 32 delta 300 3600 3575 449TS 68 323 2200 G 95.2 95.8 95.8 86 90 91 441 441 882 12 13 delta 300 1800 1785 449TS 110 346 2200 G 95 95.5 95.4 76 83 85 882 1058 1764 12 15 delta 300 1200 1185 S449LS 90 340 2400 H 96 96.1 95.8 82 85 86 1329 1396 2658 26 33 delta 350 3600 3570 S449SS 67 369 2550 G 95.4 95.7 95.4 90 92 93 515 412 1030 20 26 delta 350 1800 1785 S449LS 115 390 2550 G 95.5 95.9 95.8 79 76 88 1029 1029 2058 25 32 delta 350 1200 1185 S449LS 133 395 2550 G 95.2 95.3 95 77 84 87 1551 1551 3102 17 20 delta 400 3600 3570 S449SS 80 418 2900 G 94.2 95.6 95.4 90 93 94 588 470 1176 17 24 delta 400 1800 1785 S449LS 138 449 2900 G 95.7 96 95.8 79 85 87 1176 1176 2352 21 26 delta 400 1200 1185 S449LS 145 455 3260 H 95.2 95.2 94.5 94.5 79 84 1772 1418 3544 - - delta Prices and specifications are subject to change without notice 10-3 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions General Purpose & GP100A / GP100 / / (Aluminum Rotor) NEMA Premium Efficiency HP Synch RPM F.L. RPM Frame No Load Current [A] Full Load Lckd Rotor 460 Volts, NEMA Design B, 40 C Ambient kva/ HP Code Nominal Efficiency (%) Power Factor (%) Torque LR Stall Time ½ ¾ Full Min. Load Guar. ½ ¾ Full Load Full Load (lb-ft) Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 Lckd Rotor Break- Down Hot (Sec) Cold (Sec) Winding Conn. 1 3600 3520 143T 0.7 1.4 12 K 79.3 82.1 82.5 80.0 65.2 77.4 81.1 1.5 2.6 5.7 12 16 Wye 1 1800 1755 143T 0.8 1.4 13 L 83.4 85.4 85.5 82.5 58.4 71.5 78.2 3.0 9.0 11.5 18 26 Wye 1 1200 1165 145T 1.0 1.6 11 K 80.2 82.5 82.5 80.0 50.2 63.3 70.9 4.5 11.5 15.5 18 31 Wye 1 900* 870 182T 1.5 2.1 9 J 77.0 80.0 81.5 78.5 36.0 47.0 56.0 8 11 20 50 68 Wye 1.5 3600 3525 143T 1.1 2.0 19 L 80.0 83.2 84.0 81.5 64.2 77.0 83.6 2.2 6.0 10.0 14 19 Wye 1.5 1800 1740 145T 1.1 2.1 19 L 85.8 87.0 86.5 84.0 58.5 71.8 77.3 4.5 15.0 19.0 15 21 Wye 1.5 1200 1160 182T 1.4 2.4 15 J 85.3 87.6 87.5 85.5 48.4 58.4 66.9 6.8 14.0 22.5 34 46 Wye 1.5 900* 865 184T 2.3 3.0 17 H 78.5 82.0 82.5 80.0 35.0 47.0 56.0 12 16 28 43 63 Wye 2 3600 3515 145T 1.2 2.5 23 L 84.0 85.7 85.5 82.5 69.0 81.3 87.6 2.9 7.4 12.5 13 18 Wye 2 1800 1740 145T 1.5 2.8 24 L 86.0 87.2 86.5 84.0 57.8 70.8 77.3 6.0 19.3 23.6 14 22 Wye 2 1200 1160 184T 1.9 3.2 20 J 87.5 88.7 88.5 86.5 46.5 58.8 66.1 9.1 22.0 28.0 23 32 Wye 2 900* 870 213T 2.0 3.3 16 H 84.0 84.5 84.0 81.5 51.0 63.0 67.0 16 28 42 22 38 Wye 3 3600 3520 182T 1.7 3.8 30 J 84.2 86.3 86.5 84.0 69.5 79.8 85.5 4.4 8.2 17.0 20 30 Wye 3 1800 1760 182T 2.1 4.0 33 K 87.8 89.4 89.5 87.5 59.5 71.7 78.5 9.0 21.0 32.0 17 29 Wye 3 1200 1175 213T 2.5 4.3 32 K 87.8 89.3 89.5 87.5 52.1 65.4 73.0 13.4 35.5 63.0 23 35 Wye 3 900* 870 215T 3.0 4.8 25 H 85.5 86.5 85.5 82.5 45.0 59.0 68.0 24.0 47.0 65.0 19 31 Wye 5 3600 3505 184T 2.0 6.0 46 J 88.2 89.1 88.5 86.5 78.1 85.9 88.2 7.5 13.0 32.0 15 29 Wye 5 1800 1755 184T 3.0 6.5 46 J 89.2 90.0 89.5 87.5 63.6 75.1 80.5 15.0 33.0 53.0 14 29 Wye 5 1200 1165 215T 4.5 6.7 46 J 89.5 90.1 89.5 87.5 59.4 71.4 78.1 26.5 50.0 86.0 14 21 Wye 5 900* 875 254T 5.5 8.8 33 F 85.5 87.0 86.5 84.0 43.0 54.0 61.0 41 64 86 65 115 Wye 7.5 3600 3520 213T 3.0 8.8 63 H 89.6 90.1 89.5 87.5 78.5 86.8 89.2 11.0 20.0 55.0 17 30 Wye 7.5 1800 1765 213T 5.0 9.7 63 H 90.7 91.7 91.7 90.2 60.5 72.3 78.9 22.0 60.0 100.0 25 42 Wye 7.5 1200 1175 254T 5.0 10.0 63 H 91.1 91.5 91.0 89.5 58.4 70.2 77.2 33.0 55.0 86.0 26 45 Wye 7.5 900* 875 256T 7.9 13.0 50 G 87.0 88.0 87.5 85.5 0.4 0.6 0.6 61 101 122 50 100 Wye 10 3600 3515 215T 3.5 11.5 81 H 91.0 91.1 90.2 88.5 81.5 88.8 90.3 15.0 27.0 66.0 14 28 Wye 10 1800 1755 215T 6.1 12.5 81 H 91.7 92.2 91.7 90.2 63.8 76.2 81.7 30.0 81.0 123.0 20 36 Wye 10 1200 1175 256T 6.3 13.5 81 H 91.4 91.6 91.0 89.5 61.0 71.6 76.2 45.0 74.0 112.0 18 38 Wye 10 900* 875 284T 9.1 15 81 G 87.9 89.7 90.2 88.5 49 61 69 60 90.0 132.0 15 30 Delta 15 3600 3530 254T 5.1 17.5 116 G 90.7 91.3 91.0 89.5 80.6 87.4 88.2 22.0 46.0 57.0 24 48 Wye 15 1800 1770 254T 11.8 19.0 116 G 92.3 92.8 92.4 91.0 64.5 74.7 80.0 44.0 81.0 103.0 21 33 Wye 15 1200 1180 284T 11 21 116 G 90.9 91.8 91.7 90.2 53 66 90 67 100.5 160.8 22 48 Delta 15 900* 875 286T 14 23 116 G 88.7 90 90.2 88.5 48 60 67 90 135.0 198.0 18 35 Delta 20 3600 3515 256T 5.2 22.5 145 G 92.1 91.6 91.0 89.5 86.2 91.3 91.5 30.0 55.0 69.0 20 45 Wye 20 1800 1770 256T 10.5 25.0 145 G 93.1 93.4 93.0 91.7 65.3 75.9 80.5 60.0 110.0 144.0 15 33 Wye 20 1200 1180 286T 13 27 145 G 91.2 92 91.7 90.2 57 69 93 89 133.5 213.6 20 45 Delta 20 900* 880 324T 18 31 145 G 89.8 91.1 91 89.5 50 61 67 119 166.6 238.0 15 35 Delta 25 3600 3525 284TS 8 29 183 G 92 92.2 91.7 90.2 80 85 88 37 59.2 92.5 16 30 Delta 25 1800 1775 284T 11 30 183 G 93.5 94 93.6 92.4 71 80 84 74 133.2 185.0 24 44 Delta 25 1200 1185 324T 14 33 183 G 92.7 93.2 93 91.7 62 72 76 111 188.7 266.4 28 54 Delta 25 900* 880 326T 24 41 183 G 89.2 90.5 90.2 88.5 47 57 63 149 223.5 298.0 22 40 Delta 30 3600 3525 286TS 9.5 34 218 G 92 92.2 91.7 90.2 84 89 90 45 72.0 112.5 16 30 Delta 30 1800 1775 286T 12 35 218 G 93.9 94.1 93.6 92.4 73 82 85 89 160.2 222.5 24 44 Delta 30 1200 1185 326T 15 39 218 G 93.1 93.5 93 91.7 61 73 77 133 226.1 292.6 26 52 Delta 30 900* 885 364T 26 47 218 G 90.6 92 91.7 90.2 49 61 65 178 267.0 356.0 22 40 Delta Prices and specifications are subject to change without notice 10-4 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose & GP100A / GP100 / / (Aluminum Rotor) NEMA Premium Efficiency HP Synch RPM F.L. RPM Frame No Load Current [A] Full Load Lckd Rotor 460 Volts, NEMA Design B, 40 C Ambient kva/ HP Code Nominal Efficiency (%) Power Factor (%) Torque LR Stall Time ½ ¾ Full Min. Load Guar. ½ ¾ Full Load Full Load (lb-ft) Lckd Rotor Break- Down Hot (Sec) Cold (Sec) 2009-2010 Low Voltage AC Selection and Pricing Guide Winding Conn. 40 3600 3535 324TS 12 45 290 G 94.1 93.6 93.6 92.4 80 87 89 60 90.0 150.0 22 45 Delta 40 1800 1780 324T 15 46 290 G 94.3 94.1 94.1 93 75 83 86 118 212.4 271.4 22 45 Delta 40 1200 1185 364T 18 49 290 G 94.4 94.1 94.1 93 70 79 81 117 222.3 257.4 29 55 Delta 40 900* 885 365T 36 63 290 G 93 93.1 91.7 90.2 49 60 65 237 355.5 474.0 25 40 Delta 50 3600 3535 326TS 15 55 363 G 93.8 94.1 93.6 92.4 82 89 91 74 111.0 185.0 18 37 Delta 50 1800 1780 326T 19 58 363 G 94.8 95 94.5 93.6 74 82 85 148 251.6 340.4 22 45 Delta 50 1200 1185 365T 24 62 363 G 94 94.3 94.1 93 67 76 80 222 421.8 488.4 29 55 Delta 50 900* 885 404T 28 67 363 G 93 93.1 92.4 91 64 73 76 297 415.8 594.0 25 40 Delta 60 3600 3565 364TS 19 68 435 G 93.8 94.1 93.6 92.4 80 86 88 89 142.4 222.5 16 28 Delta 60 1800 1780 364T 21 68 435 G 95.2 95.4 95 94.1 77 85 87 177 318.6 424.8 26 38 Delta 60 1200 1185 404T 28 74 435 G 94.2 94.7 94.5 93.6 65 76 80 266 478.8 585.2 25 50 Delta 60 900* 885 405T 30 78 435 G 93 93.1 92.4 91 66 75 78 356 498.4 712.0 30 35 Delta 75 3600 3565 365TS 22 86 553 G 93.7 94.3 94.1 93 81 86 88 111 177.6 288.6 16 27 Delta 75 1800 1780 365T 25 85 543 G 95.6 95.8 95.4 94.5 78 85 87 221 397.8 530.4 25 35 Delta 75 1200 1185 405T 34 93 543 G 94.7 94.9 94.5 93.6 68 77 80 332 597.6 730.4 33 45 Delta 75 900* 885 444T 37 94 543 G 93.5 93.9 93.6 92.4 67 76 80 445 600.8 890 25 32 Delta 100 3600 3570 405TS 19 108 725 G 94.6 94.7 94.1 93 90 92 92 147 176.4 294.0 25 45 Delta 100 1800 1780 405T 30 113 725 G 95.8 96 95.4 94.5 80 86 87 295 531.0 590.0 25 35 Delta 100 1200 1185 444T 39 117 725 G 95.1 95.3 95 94.1 73 81 84 443 708.8 886.0 30 35 Delta 100 900* 885 445T 48 123 725 G 94.2 94.5 94.1 93 70 78 81 593 770.9 1186.0 22 30 Delta 125 3600 3575 444TS 37 140 753 G 94.5 95.1 95 94.1 84 88 89 184 220.8 368.0 18 23 Delta 125 1800 1785 444T 45 143 908 G 95.4 95.6 95.4 94.5 78 84 86 368 588.8 736.0 20 25 Delta 125 1200 1185 445T 48 144 908 G 95.1 95.4 95 94.1 74 82 85 554 886 1108 25 35 Delta 125 900* 885 447T 54 152 908 G 94.6 94.7 94.1 93 70 79 82 742 964.6 1484.0 20 30 Delta 150 3600 3575 445TS 43 162 1045 G 94.8 95.2 95 94.1 84 89 90 220 264.0 440.0 15 18 Delta 150 1800 1785 445T 52 170 1085 G 95.7 96 95.8 95 78 84 86 441 661.5 882.0 20 30 Delta 150 1200 1190 447T 59 172 1085 G 95.6 96 95.8 95 73 82 85 662 926 1324 28 43 Delta 150 900* 885 449T 61 180 1085 G 94.3 94.5 94.1 93.0 72 80 83 890 1157 1780 20 25 Delta 200 3600 3575 447TS 59 220 1350 G 95.3 95.6 95.4 94.5 88 90 91 294 352.8 588.0 16 20 Delta 200 1800 1785 447T 70 226 1450 G 96.2 96.5 96.2 95.4 76 84 86 588 940.8 1176.0 18 25 Delta 200 1200 1190 449T 73 227 1450 G 95.6 96.2 95.8 95.0 75 83 86 883 1103.5 1776 25 32 Delta 200 900* 885 S449LS 78 240 1450 G 95 95 94.5 93.6 71 79 83 1187 1483.5 2374 15 25 Delta 250 3600 3575 449TS 45 269 1825 G 95.7 96 95.8 95 89 91 91 368 441.6 736.0 12 18 Delta 250 1800 1785 449T 90 281 2100 H 96.1 96.3 96.2 95.4 78 85 87 735 1029.0 1470.0 18 25 Delta 250 1200 1190 449T 86 281 2050 H 95.7 96 95.8 95 81 86 87 1104 1325 2648 20 25 Delta 250 900* 885 S449LS 109 303 1825 G 94.5 94.8 94.5 93.6 70 78 82 1483 1557.2 2966.0 25 32 Delta 300 3600 3570 449TS 68 323 2200 G 95.2 95.8 95.8 95 86 90 91 441 441.0 882.0 12 13 Delta 300 1800 1785 S449LS 114 346 2400 H 96.1 96.3 96.2 95.4 75 83 86 882 1234.8 1764.0 22 30 Delta 300 1200 1185 S449LS 119 340 2400 H 96 96.1 95.8 95.0 82 85 86 1329 1395.5 2658.0 26 33 Delta 350 3600 3570 S449SS 68 372 2550 G 95.8 96.1 95.8 95 89 91 92 515 412.0 1030.0 20 26 Delta 350 1800 1785 S449LS 115 392 2550 G 95.8 96.3 96.2 95.4 77 84 86 1029 1029.0 2058.0 25 32 Delta 400 3600 3570 S449SS 80 422 2900 G 94.6 96.1 95.8 95 89 92 93 588 470.4 1176.0 21 23 Delta 400 1800 1785 S449LS 130 454 2900 G 96 96.4 96.2 95.4 77 84 86 1176 1176.0 2352.0 21 26 Delta Prices and specifications are subject to change without notice Meets or Exceeds Energy Independence & Security Act Efficiency Levels 2010 10-5 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty General Purpose & - TEFC GP100A / GP100 / / (Copper Rotor) NEMA Premium Efficiency Plus HP Synch RPM F.L. RPM Frame No Load Current [A] Full Load Lckd Rotor 460 Volts, NEMA Design B, 40 C Ambient kva/ HP Code Nominal Efficiency (%) Power Factor (%) Torque LR Stall Time ½ ¾ Full Min. Load Guar. ½ ¾ Full Load Full Load (lb-ft) Lckd Rotor Break- Down 1 1800 1775 143T 0.9 1.5 15 N 83 86 86.5 85.5 53 65 74 3 290 480 16 20 wye 1 1200 1175 145T 1 1.6 12 L 80.5 83.5 84 82.5 49 61 70 4.5 210 380 19 27 wye 1.5 3600 3550 143T 0.8 1.9 20 M 83 86 87.5 86.5 69 79 85 2.2 230 480 19 26 wye 1.5 1800 1770 145T 1.2 2.1 20 M 85 87 87.5 86.5 57 69 77 4.5 250 460 14 19 wye 2 3600 3550 145T 1.2 2.6 25 M 85 88 88.5 87.5 66 77 83 3 250 490 18 26 wye 2 1800 1765 145T 1.6 2.8 25 L 86 87.5 87.5 86.5 55 69 78 6 240 440 15 21 wye 3 3600 3565 182T 1.5 3.8 32 K 85.5 89 89.5 88.5 69 79 83 4.4 220 400 36 51 wye 3 1800 1770 182T 1.8 4 32 K 88.5 90 90.2 89.5 63 73 79 8.9 230 390 31 45 wye 3 1200 1180 213T 2.3 4.3 32 K 88.5 90 90.2 89.5 55 67 74 13 170 360 27 35 wye 5 3600 3550 184T 2.3 6.2 46 J 89 90.2 90.2 89.5 70 80 84 7.4 200 440 21 38 wye 5 1800 1770 184T 3.2 6.7 46 J 89.5 90 90.2 89.5 62 72 78 15 225 340 19 35 wye 5 1200 1180 215T 3.5 6.8 46 J 89 90.5 90.2 89.5 56 68 76 22 190 350 21 31 wye 7.5 3600 3560 213T 2.6 8.5 63 H 91 92 91.7 91 78 86 88 11 170 340 19 31 wye 7.5 1800 1775 213T 4 9.5 63 H 92 92.5 92.4 91.7 65 76 81 22 250 340 34 49 wye 7.5 1200 1180 254T 5 10.5 63 H 91.5 92.5 92.4 91 57 67 76 33 190 230 66 92 wye 10 3600 3555 215T 3.4 11.5 81 H 92 92.3 91.7 91 78 86 89 15 200 360 13 24 wye 10 1800 1770 215T 5.5 12.5 81 H 92 92.5 92.4 91.7 64 75 81 30 250 280 25 41 wye 10 1200 1185 256T 6.5 13.5 81 H 92 92.5 92.4 91 57 68 72 44 242 252 45 73 wye 15 3600 3565 254T 5 17 116 G 91 92 92.4 91.7 81 87 89 22 220 285 45 81 wye 15 1800 1780 254T 7.3 19 116 G 92.5 93.5 93 92.4 66 76 80 44 198 253 25 55 wye 20 3600 3560 256T 5.5 23 145 G 92 92.5 92.4 91.7 84 88 88 30 210 250 34 75 wye 20 1800 1780 256T 9.5 25 145 G 93 93.5 93.6 93 68 78 80 59 187 230 28 56 wye Prices and specifications are subject to change without notice * EPAct Efficient - motors only Exceeds Energy Independence & Security Act Efficiency Levels 2010 Hot (Sec) Cold (Sec) Winding Conn. Dimensions Purpose 10-6 2009-2010 Low Voltage AC Selection and Pricing Guide

Notes Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 10-7 Dimensions

Introduction General Purpose SD10 MS Multi-Speed 1 Winding Variable Torque HP Current [A] kva/ Synch F.L. Frame HP RPM RPM No Full Lckd Load Load Rotor Code 460 Volts, NEMA Design B, 40 C Ambient 1/0.25 1800/900 1745/850 143T 1.3/0.8 1.8/0.9 11/2.5 K 1,5/0.37 1800/900 1740/855 145T 1.4/0.9 2.2/1 14.6/3.3 K 2/0.5 1800/900 1745/865 182T 1.2/0.9 2.7/1.3 20/4.9 K 3/0.75 1800/900 1735/855 184T 2/1.1 4/1.5 32/5.5 J 5/1.2 1800/900 1760/865 213T 3.6/1.9 6.6/2.4 46/9 J 7,5/1.9 1800/900 1760/865 215T 5.2/2.6 9.9/3.5 63/13 J 10/2.5 1800/900 1770/880 254T 6/4.3 12.9/5.4 81/18 H 15/3.7 1800/900 1770/880 256T 7.7/5.6 18.5/7.5 115/26 J 20/5 900 1770/880 284T 10/7.2 25/9.3 153/37 G 25/6.2 900 1765/880 286T 10.5/8 30/11.5 177/46 G 30/7.5 900 1770/885 324T 11.5/8.5 35/13 240/554 H 40/10 900 1770/885 326T 16/11.2 46/17 340/81 H 50/12.5 900 1780/890 364T 20.5/15.5 58/22.5 425/97 H 60/15 900 1780/885 365T 26/18.5 93.3/86.2 458/103 G 75/19 900 1785/890 405T 26.5/20 86/32 568/120 G 100/25 900 1790/890 444TS 41.5/31 118/46 804/178 H 100/25 900 1790/890 B444T 41.5/31 118/46 804/178 H 125/31 900 1790/890 445TS 46/39 158/57 1045/223 H 125/31 900 1790/890 B445T 46/39 158/57 1045/223 H 150/37 900 1785/890 447TS 64.5/45.5 176/68 1260/273 H 150/37 900 1785/890 B447T 64.5/45.5 176/68 1260/273 H 200/50 900 1785/890 B449T 65/51 230/86 1460/291 G 200/50 900 1785/890 449TS 65/51 230/86 1460/291 G 250/62.5 900 1785/890 449TS 81/59 289/105 1835/366 G 250/62.5 900 1785/890 B449T 81/59 289/105 1835/366 G Prices and specifications are subject to change without notice Dimensions Duty Duty Purpose 10-8 2009-2010 Low Voltage AC Selection and Pricing Guide

½ Nominal Efficiency (%) Power Factor (%) Torque LR Stall Time ¾ Full Load ½ ¾ Full Load Full Load (lb-ft) Lckd Rotor (%) Break-Down (%) Hot (Sec) Cold (Sec) Winding Conn. Introduction General Purpose 70.5/42 74.5/48.8 75.5/52.5 47/34 60/42 69/50 3/1.5 250/160 290/250 12 22 YY//Y 79.7/48.5 81.9/53.9 81.5/55.5 57/47 70.4/58.7 78.3/62.4 4.5/2.2 250/140 280/225 12 24 YY//Y 82.7/60.72 84.3/67.1 84/70 62.6/33.3 76.16/42.7 82.57/51.45 6.0/3.0 235/140 290/225 12 25 YY//Y 85.5/69.8 85.4/74.1 84/75.5 69/40.4 79/52.5 83.6/62.0 9.0/4.6 240/135 290/220 18 36 YY//Y 84.6/72.05 85.9/76.9 85.5/78.5 62.6/40.2 75.7/51.4 82.9/59.6 14.9/7.3 185/120 225/200 14 26 YY//Y 85.1/70 86/72.5 85.5/74 62/46 76/60 82.9/68.6 22.4/11.5 175/130 215/210 14 26 YY//Y 87.8/75 88.7/79.7 88.5/81.5 65.8/34.6 76.7/45.1 82.0/53.1 29.7/14.9 165/110 200/180 14 29 YY//Y 89.8/79 90.5/82.9 90.2/84 69/37.06 79/47.8 84.2/54.9 44.5/22.09 160/120 200/180 17 32 YY//Y 88.7/80 89/83 88.5/84 71/38 51/50 85/59 59.4/30 113/54 159/75 19 40 YY//Y 90.3/82.9 90.4/85.2 89.5/85.5 76/40 84/52 87/60 74/37 140/55 177/74 19 40 YY//Y 91.9/85 92.3/87.7 91.7/88.5 85/44 77/56 88/61 89/45 195/67 240/90 20 40 YY//Y 92.7/85.8 92.9/88.4 92.4/88.5 73/41 83/53 88/61 124/59 248/88 322/129 20 40 YY//Y 93.3/86.4 93.5/88.8 93/89.5 73/38 83/50 86/58 147/74 265/96 352/192 22 42 YY//Y 93.3/86.2 93.5/81 93/88.5 73/39 81/51 85/59 178/89 284/112 384/178 22 45 YY//Y 90.5/85.8 92.6/88.1 93/88.5 79/45 84/56 86/63 220/112 352/156 550/212 23 42 YY//Y 94/88.4 94.1/90.4 93.6/91 73/40 81/51 84/59 293/147 644/220 820/286 28 36 YY//Y 94/88.4 94.1/90.4 93.6/91 73/40 81/51 84/59 293/147 644/220 820/286 28 36 YY//Y 92.7/88.9 93.2/90.9 93/91.7 67/38 77/48 81/56 367/182 697/273 880/364 20 23 YY//Y 92.7/88.9 93.2/90.9 93/91.7 67/38 77/48 81/56 367/182 697/273 880/364 20 23 YY//Y 92.1/87.6 93.2/89.6 93.6/90.2 73/39 82/50 85/58 441/221 926/375 1190/440 24 29 YY//Y 92.1/87.6 93.2/89.6 93.6/90.2 73/39 82/50 85/58 441/221 926/375 1190/440 24 29 YY//Y 92.3/91.6 93.3/92.9 94.5/93 79/43 85/53 86/58 588/295 1058/383 1410/501 22 30 YY//Y 92.3/91.6 93.3/92.9 94.5/93 79/43 85/53 86/58 588/295 1058/383 1410/501 22 30 YY//Y 92.9/90 93.6/91.1 93.6/91 79/45 85/56 87/61 735/369 1433/516 1984/590 20 25 YY//Y 92.9/90 93.6/91.1 93.6/91 79/45 85/56 87/61 735/369 1433/516 1984/590 20 25 YY//Y Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 10-9 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions & Duty RGZZESD, RGZZESD ID1, RGZZESDI 10-10 2009-2010 Low Voltage AC Selection and Pricing Guide High Efficiency HP Current [A] kva/ Synch F.L. Frame HP RPM RPM No Full Lckd Load Load Rotor Code 460 Volts, NEMA Design B (except as noted), 40 C Ambient 1 1800 1745 143T 1.1 1.5 11 K 1 1200 1140 145T 1.3 1.8 9 J 1 900 860 182T 1.2 1.9 8 H 1.5 3600 3485 143T 0.9 2 16 K 1.5 1800 1740 145T 1.4 2.2 17 K 1.5 1200 1160 182T 1.5 2.3 16 K 1.5 900 860 184T 1.8 2.6 13 H 2 3600 3495 145T 1.1 2.5 22 K 2 1800 1735 145T 1.9 2.9 21 K 2 1200 1160 184T 1.9 3 22 K 2 900 865 213T 2.2 3.3 17 H 3 3600 3510 182T 1.7 3.6 32 K 3 1800 1740 182T 1.8 3.9 30 K 3 1200 1165 213T 2.3 4 32 K 3 900 865 215T 3.1 4.7 26 H 5 3600 3490 184T 1.8 5.8 46 J 5 1800 1730 184T 3.2 6.5 46 J 5 1200 1160 215T 3.3 6.8 46 J 5 900 865 254T 4.1 7.5 40 H 7.5 3600 3515 213T 3.4 8.8 64 H 7.5 1800 1750 213T 4.2 9.5 64 H 7.5 1200 1170 254T 4.5 9.8 60 H 7.5 900 865 256T 6.6 12 64 H 10 3600 3505 215T 4 12 81 H 10 1800 1750 215T 5.4 13 81 H 10 1200 1165 256T 5 13 75 G 10 900 875 284T 9.1 15 81 H 15 3600 3530 254T 5 17 116 G 15 1800 1760 254T 7.3 19 116 G 15 1200 1175 284T 10 20 116 G 15 900 875 286T 14 23 116 G 20 3600 3525 256T 7.4 23 145 G 20 1800 1755 256T 9.1 26 145 G 20 1200 1175 286T 12 26 145 G 20 900 880 324T 18 31 145 G 25 3600 3525 284TS 8 29 183 G 25 1800 1765 284T 13 29 183 G 25 1200 1180 324T 15 33 183 G 25 900 880 326T 22 38 183 G 30 3600 3525 286TS 9.5 34 218 G 30 1800 1765 286T 15 35 218 G 30 1200 1180 326T 19 39 218 G 30 900 885 364T 26 47 218 G 40 3600 3530 324TS 12 45 290 G 40 1800 1770 324T 15 47 290 G 40 1200 1180 364T 24 52 290 G 40 900 885 365T 36 63 290 G Prices and specifications are subject to change without notice * NEMA Design A. 1.0SF, Class F.

½ Nominal Efficiency (%) Power Factor (%) Torque LR Stall Time ¾ Full Load ½ ¾ Full Load Full Load (lb-ft) Lckd Rotor (%) Break- Down (%) Hot (Sec) Cold (Sec) Winding Conn. Introduction General Purpose 78.7 81.8 82.5 52 66 76 3 290 320 14 30 wye 76.4 78.8 80 42 56 65 4.6 230 290 19 40 wye 76.6 78.9 78.5 42 54 63 6.1 220 260 20 40 wye 78 82 82.5 69 79 85 2.3 270 320 13 28 wye 80.7 83.5 84 54 67 76 4.5 290 320 13 29 wye 81.6 84.2 85.5 50 63 71 6.8 280 320 22 33 wye 78 80.4 80 45 58 68 9.2 220 270 18 30 wye 79.9 83.2 84 73 83 89 3 270 320 15 33 wye 80.7 83.6 84 52 67 77 6.1 290 310 12 25 wye 84.5 86 86.5 50 63 72 9.1 220 300 21 32 wye 80 82 82.5 46 60 69 12 200 290 18 30 wye 83.8 86.2 86.5 75 84 90 4.5 230 320 15 34 wye 87.5 88 87.5 65 76 82 9.1 260 300 16 35 wye 85.8 87.6 87.5 58 73 80 14 210 300 17 35 wye 82.5 84.2 84 48 62 71 18 190 280 15 32 wye 86.5 87.8 87.5 82 89 92 8 260 320 12 26 wye 87.5 88.2 87.5 63 75 82 15 260 300 17 36 wye 89 89.7 88.5 59 71 78 23 210 300 14 29 wye 86 87 86.5 53 66 72 30 180 260 13 25 wye 87 88 88.5 77 86 90 11 190 280 11 25 wye 89 90 89.5 66 77 83 23 210 270 14 29 wye 90.6 90.9 90.2 59 72 78 34 180 250 18 35 wye 87 88 87.5 49 61 69 46 190 260 15 30 wye 89 89.8 89.5 80 89 87 15 190 260 14 29 wye 89.5 90 89.5 68 79 84 30 210 270 15 30 wye 91.7 91.5 90.2 65 75 80 45 170 250 18 35 wye 89.4 90.9 91 50 61 69 60 150 220 15 30 delta 88.5 90 90.2 84 90 92 22 190 260 17 31 wye 91.7 92.1 91.7 68 78 82 45 190 260 18 35 wye 91 91.7 91 57 71 77 67 160 270 20 45 delta 90.1 91.4 91 50 60 67 90 150 220 18 35 delta 88.3 89.9 90.2 82 86 90 30 180 260 17 25 wye 92.1 92.4 91.7 67 76 80 60 190 270 18 35 wye 92.1 92.4 91.7 62 73 79 89 160 250 19 43 delta 90 91.2 91 50 61 67 119 140 200 15 35 delta 92 92.2 91.7 80 85 88 37 160 250 16 30 delta 93.3 93.6 93 72 82 87 74 220 280 19 40 delta 92.2 92.7 92.4 57 69 77 111 170 240 25 50 delta 89.2 90.5 90.2 50 61 68 149 150 200 22 40 delta 92 92.2 91.7 84 89 90 45 160 250 16 30 delta 93.2 93.6 93 71 82 86 89 220 280 19 40 delta 92.6 92.9 92.4 58 70 78 134 170 240 25 50 delta 89.9 91.3 91 50 62 66 178 150 200 22 40 delta 94 94.1 93.6 80 87 89 60 150 250 22 45 delta 94 94.2 93.6 77 82 85 119 190 240 20 40 delta 93.6 93.9 93.6 59 71 77 178 170 230 29 55 delta 90.7 92 91.7 49 60 65 237 150 200 25 40 delta 2009-2010 Low Voltage AC Selection and Pricing Guide 10-11 Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions & Duty RGZZESD, RGZZESD ID1, RGZZESDI High Efficiency HP Current [A] kva/ Synch F.L. Frame HP RPM RPM No Full Lckd Load Load Rotor Code 460 Volts, NEMA Design B (except as noted), 40 C Ambient 50 3600 3530 326TS 15 55 363 G 50 1800 1770 326T 18 58 363 G 50 1200 1180 365T 30 66 363 G 50 900 885 404T 28 67 363 G 60 3600 3565 364TS 19 68 435 G 60 1800 1775 364T 21 71 435 G 60 1200 1185 404T 26 74 435 G 60 900 885 405T 30 78 435 G 75 3600 3565 365TS 22 85 543 G 75 1800 1775 365T 27 87 543 G 75 1200 1185 405T 34 93 543 G 75 900 885 444T 37 94 543 G 100 3600 3570 405TS 19 108 725 G 100 1800 1780 405T 30 113 725 G 100 1200 1185 444T 38 117 725 G 100 900 885 445T 48 123 725 G 125 3600 3575 444TS 32 138 908 G 125 1800 1785 444T 42 143 908 G 125 1200 1185 445T 44 144 908 G 125 900 885 447T 54 152 908 G 150 3600 3575 445TS 37 164 1085 G 150 1800 1785 445T 45 170 1085 G 150 1200 1185 447T 45 170 1085 G 150 900 885 449T 72 186 1085 G 200 3600 3575 447TS 40 216 1450 G 200 1800 1785 447T 60 225 1450 G 200 1200 1185 449T 55 226 1450 G 200 900 885 S449 101 241 1450 G 250 3600 3570 449TS 45 267 1825 G 250 1800 1785 449T 78 281 1825 G 250 1200 1185 449T 75 280 1825 G 250 900 885 S449 111 303 1825 G 300 3600 3575 449TS 68 323 2200 G 300 1800 1785 S449 110 346 2200 G 300 1200 1185 S449 90 336 2200 G 350 3600 3570 S449SS 67 369 2550 G 350 1800 1785 S449 115 390 2550 G 350 1200 1185 S449 133 395 2550 G 400 3600 3570 S449SS 80 418 2900 G 400 1800 1785 S449 138 449 2900 G 400 1200 1185 S449 145 455 3260 H * Prices and specifications are subject to change without notice * NEMA Design A. 1.0SF, Class F. 10-12 2009-2010 Low Voltage AC Selection and Pricing Guide

½ Nominal Efficiency (%) Power Factor (%) Torque LR Stall Time ¾ Full Load ½ ¾ Full Load Full Load (lb-ft) Lckd Rotor (%) Break- Down (%) Hot (Sec) Cold (Sec) Winding Conn. Introduction General Purpose 94.1 94.2 93.6 82 89 91 74 150 250 18 37 delta 94.1 94.2 93.6 77 87 86 148 190 240 20 40 delta 94 94.2 93.6 60 71 76 223 170 230 29 55 delta 92.3 92.4 91.7 64 73 76 297 140 200 25 40 delta 93.8 94.1 93.6 80 86 88 89 160 250 16 28 delta 93.9 94.1 93.6 74 82 85 178 160 240 22 45 delta 94.1 94.5 94.1 70 78 81 266 150 200 25 50 delta 92.3 92.4 91.7 67 76 79 356 140 200 30 35 delta 94.3 94.5 94.1 81 86 88 111 160 260 16 27 delta 94.4 94.6 94.1 74 83 85 222 155 240 22 45 delta 94.7 94.9 94.5 68 77 80 332 150 200 33 45 delta 92.9 93.3 93 67 76 80 445 135 200 25 32 delta 94.6 94.7 94.1 90 92 92 147 120 200 25 45 delta 95 95.2 94.5 80 85 87 295 160 200 25 35 delta 94.6 94.9 94.5 75 82 85 443 140 200 30 35 delta 94.2 94.5 94.1 70 78 81 593 130 200 22 30 delta 94 94.6 94.5 85 89 89 184 120 200 18 23 delta 95.1 95.3 95 78 84 86 368 160 200 20 25 delta 94.7 94.9 94.5 77 84 86 554 140 200 25 35 delta 94.1 94.2 93.6 70 79 82 742 130 200 20 30 delta 94.8 95.2 95 84 89 90 220 120 200 15 18 delta 95.7 96 95.8 80 85 86 441 150 200 20 30 delta 95.4 95.6 95 81 86 87 665 125 200 28 43 delta 94.1 94.5 94.1 67 76 80 890 130 200 20 25 delta 94.9 95.2 95 88 90 91 294 120 200 16 20 delta 96 96.1 95.8 81 86 87 588 150 200 18 25 delta 95.4 95.5 95 82 86 87 886 125 200 25 32 delta 94.8 94.9 94.5 71 79 82 1186 125 200 15 25 delta 95.3 95.6 95.4 90 92 92 368 120 200 12 18 delta 95.8 96 95.8 80 85 87 735 140 200 18 25 delta 95.5 95.5 95 82 87 88 1108 120 200 20 25 delta 94.5 94.8 94.5 70 78 82 1483 105 200 25 32 delta 95.2 95.8 95.8 86 90 91 441 100 200 12 13 delta 95 95.5 95.4 76 83 85 882 120 200 12 15 delta 95.5 95.5 95 82 87 88 1329 105 200 26 33 delta 95.4 95.7 95.4 90 92 93 515 80 200 20 26 delta 95.5 95.9 95.8 79 86 88 1029 100 200 25 32 delta 95.2 95.3 95 77 84 87 1551 100 200 17 20 delta 94.2 95.6 95.4 90 93 94 588 80 200 17 24 delta 95.7 96 95.8 79 85 87 1176 100 200 21 26-95.2 95.3 94.5 79 84 87 1772 100 200 - - - Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 10-13 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty - TEFC RGZESDI HP Synch RPM Frame Speed Range 460 Volts, 40 C Ambient F.L. RPM FL Amps NL Amps Nom. FL Eff. (%) FL Torque (lb-ft) Max Torque Const. HP (lb-ft) Max RPM Const. HP HP @ Min Const. Torque 10:1 Constant Torque Ohms/Phase (Y equiv.) Circuit Parameters 25ºC X1 X2 XM R1 R2 1 1800 143T 10:1 1745 1.5 1.1 82.5 3 1.5 3490 0.07 7.33 8.02 306 9.45 5.85 1 1200 145T 10:1 1140 1.8 1.3 80 4.6 2.3 2280 0.05 7.47 6.54 214 12.5 8.68 1 900 182T 10:1 890 1.9 1.2 78.5 6.1 3.1 1760 0.09 12.28 17.15 297 15.68 12.28 1.5 3600 143T 10:1 3485 2 0.9 82.5 2.3 1.2 5225 0.11 6.87 3.18 372 6.4 4.52 1.5 1800 145T 10:1 1740 2.2 1.4 84 4.5 2.3 3480 0.10 4.94 5.27 199 6.98 4.37 1.5 1200 182T 10:1 1160 2.3 1.5 85.5 6.8 3.4 2320 0.10 5.22 9.4 185 6.28 4.54 1.5 900 184T 10:1 860 2.6 1.8 80 9.2 4.6 1760 0.09 8.31 12.02 202 8.31 12.08 2 3600 145T 10:1 3495 2.5 1.1 84 3 1.5 5240 0.15 4.87 2.45 286 4.59 3.56 2 1800 145T 10:1 1735 2.9 1.9 84 6.1 3 3470 0.13 3.8 4.16 165 5.05 3.56 2 1200 184T 10:1 1160 3 1.9 86.5 9.1 4.5 2320 0.14 3.59 7.37 145 4.26 3.43 2 900 213T 10:1 865 3.3 2.2 82.5 12 6 1765 0.13 7.53 6.74 147 7.46 5.13 3 3600 182T 10:1 3510 3.6 1.7 86.5 4.5 2.3 5265 0.23 4.34 2.21 193 2.84 2.02 3 1800 182T 10:1 1740 3.9 1.8 87.5 9.1 4.5 3480 0.21 2.98 4.54 146 3.13 2.62 3 1200 213T 10:1 1165 4 2.3 87.5 14 6.8 2330 0.23 3.24 4.57 130 3.25 1.73 3 900 215T 10:1 865 4.7 3.1 84 18 9 1765 0.19 5.66 5.287 118 5.23 3.87 5 3600 184T 10:1 3490 5.8 1.8 87.5 7.5 3.8 5235 0.36 2.62 1.54 135 1.86 1.4 5 1800 184T 10:1 1730 6.5 3.2 87.5 15 7.6 3460 0.31 1.71 2.7 84.2 1.85 1.64 5 1200 215T 10:1 1160 6.8 3.3 88.5 23 11.3 2320 0.35 2.01 2.91 86.8 1.99 1.23 5 900 256T 10:1 865 7.5 4.1 86.5 30 15 1765 0.31 3 3.69 56.1 0.91 1.47 7.5 3600 213T 10:1 3515 8.8 3.4 88.5 11 7.5 5270 0.58 2.08 1.46 83.6 1.2 0.71 7.5 1800 213T 10:1 1750 9.5 4.2 89.5 23 11.3 3500 0.57 1.27 2.48 63.2 1.03 0.75 7.5 1200 256T 10:1 1170 9.8 5 90.2 34 16.8 2340 0.58 1.41 1.71 52.1 0.68 0.53 7.5 900 284T 10:1 865 12 6.6 87.5 46 23 1765 0.48 2.02 2.44 34.6 0.65 0.49 10 3600 215T 10:1 3505 12 4 89.5 15 10 5255 0.76 1.67 1.27 74 0.97 0.6 10 1800 215T 10:1 1750 13 5.4 89.5 30 15 3500 0.74 0.99 1.98 49.6 0.82 0.61 10 1200 284T 10:1 1165 13 10 89.5 45 22.5 2330 0.73 1 1.11 26.3 0.4 0.24 10 900 286T 10:1 875 15 9.1 91 60 36 1475 0.74 1.34 1.68 23.8 0.38 0.33 15 3600 256T 10:1 3530 17 7.4 90.2 22 15 5295 1.2 0.95 0.8 40.3 0.3 0.27 15 1800 256T 10:1 1760 19 9.1 91.7 45 22.4 3520 1.2 0.6 1.26 30.7 0.26 0.26 15 1200 286T 10:1 1175 20 12 91 67 40 1955 1.2 0.77 0.93 22.9 0.29 0.21 15 900 324T 10:1 875 23 18 91 90 54 1475 1.1 1.15 1.68 14.8 0.23 0.193 20 3600 284TS 10:1 3525 23 8 90.2 30 19.9 5285 1.6 0.55 1.14 38.5 0.27 0.21 20 1800 284T 10:1 1755 26 13 91.7 60 29.9 3510 1.5 0.55 0.88 22.8 0.19 0.18 20 1200 324T 10:1 1175 26 15 91.7 89 54 1955 1.6 0.67 0.65 16.1 0.17 0.15 20 900 326T 10:1 880 31 22 91 119 71 1480 1.6 0.95 1.41 12.6 0.174 0.16 25 3600 286TS 10:1 3525 29 9.5 91.7 37 24.9 4700 2 0.42 0.98 33.8 0.2 0.17 25 1800 286T 10:1 1765 29 15 93 74 49.7 2940 2 0.44 0.75 20.3 0.15 0.15 25 1200 326T 10:1 1180 33 19 92.4 111 67 1965 2.1 0.556 0.56 13.9 0.15 0.13 25 900 364T 10:1 880 38 26 90.2 149 89 1480 2 0.77 1.15 9.65 0.144 0.083 30 3600 324TS 10:1 3525 34 12 91.7 45 29.8 4700 2.4 0.33 0.6 22.6 0.088 0.100 30 1800 324T 10:1 1765 35 15 93 89 59.6 2940 2.5 0.38 0.67 18.5 0.110 0.100 30 1200 364T 10:1 1180 39 24 92.4 134 80 1965 2.6 0.41 0.7 11.6 0.1 0.07 30 900 365T 10:1 885 47 28 91 178 119 1335 2.5 0.56 0.87 7.2 0.094 0.06 Prices and specifications are subject to change without notice Efficiency Values are shown for 60 hertz sine wave power. 10-14 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty - TEFC RGZESDI HP Synch RPM Frame Speed Range 460 Volts, 40 C Ambient F.L. RPM FL Amps NL Amps Nom. FL Eff. (%) FL Torque (lb-ft) Max Torque Const. HP (lb-ft) Max RPM Const. HP HP @ Min Const. Torque 10:1 Constant Torque Ohms/Phase (Y equiv.) Circuit Parameters 25ºC X1 X2 XM R1 R2 40 3600 326TS 10:1 3530 45 15 93.6 60 47.7 4705 3.3 0.25 0.49 18.8 0.072 0.083 40 1800 326T 10:1 1770 47 18 93.6 119 79.2 2940 3.4 0.31 0.54 15.8 0.082 0.082 40 1200 365T 10:1 1180 52 30 93.6 178 119 1770 3.4 0.32 0.58 10.4 0.081 0.058 40 900 404T 10:1 885 63 28 91.7 237 158 1335 3.4 0.49 0.82 10.2 0.079 0.071 50 3600 364TS 10:1 3530 55 19 93.6 74 59.6 4705 4.1 0.3 0.56 14.8 0.066 0.054 50 1800 364T 10:1 1770 58 21 93.6 148 98.9 2950 4.2 0.30 0.46 11.6 0.066 0.051 50 1200 404T 10:1 1180 66 26 93.6 223 148 1770 4.2 0.35 0.58 10.8 0.049 0.033 50 900 405T 10:1 885 67 30 91.7 297 198 1330 4.2 0.49 0.82 10.2 0.08 0.071 60 3600 365TS 10:1 3565 68 22 93.6 89 89 4455 5.5 0.20 0.46 12.8 0.045 0.041 60 1800 365T 10:1 1775 71 27 93.6 178 118 2660 5.3 0.23 0.37 9.2 0.051 0.041 60 1200 405T 10:1 1185 74 34 94.1 266 177 1775 5.3 0.26 0.45 8.4 0.035 0.025 60 900 444T 10:1 885 78 37 91.7 356 237 1330 5.1 0.27 0.47 7.8 0.05 0.044 75 3600 405TS 10:1 3565 85 19 94.1 111 111 4455 6.9 0.21 0.32 16 0.034 0.015 75 1800 405T 10:1 1775 87 30 94.1 222 148 2660 6.6 0.2 0.37 9.6 0.028 0.016 75 1200 444T 10:1 1185 93 38 94.5 332 222 1775 6.6 0.17 0.35 7.3 0.026 0.016 75 900 445T 10:1 885 94 48 93 445 297 1335 6.4 0.2 0.36 6.1 0.03 0.033 100 3600 444TS 10:1 3570 108 32 94.1 147 147 3570 9.2 0.14 0.27 8.8 0.018 0.010 100 1800 444T 10:1 1780 113 42 94.5 295 197 2670 9 0.14 0.33 6.7 0.017 0.011 100 1200 445T 10:1 1185 117 44 94.5 443 296 1775 8.9 0.14 0.29 6.2 0.02 0.013 100 900 447T 10:1 885 123 54 94.1 593 395 1335 8.5 0.15 0.29 4.8 0.027 0.03 125 3600 445TS 10:1 3575 138 37 94.5 184 184 3575 11.7 0.1 0.21 7.2 0.012 0.007 125 1800 445T 10:1 1785 143 45 95 368 245 2675 11.6 0.12 0.3 6.1 0.015 0.009 125 1200 447T 10:1 1185 144 45 94.5 554 370 1775 11.1 0.13 0.28 6.1 0.017 0.012 125 900 447T 10:1 885 152 72 93.6 742 495 1335 10.6 0.15 0.29 4.8 0.027 0.026 150 3600 447TS 10:1 3575 164 40 95 220 220 3575 14 0.087 0.2 7 0.01 0.006 150 1800 447T 10:1 1785 170 60 95.8 441 294 2675 13.9 0.085 0.22 4.6 0.01 0.007 150 1200 449T 10:1 1185 170 55 95 665 444 1775 13.3 0.092 0.21 4.8 0.013 0.009 150 900 449T 10:1 885 186 101 94.1 890 593 1335 12.7 0.10 0.19 3.1 0.018 0.018 200 3600 449TS 10:1 3575 223 45 95 294 294 3575 18.8 0.69 0.17 6.4 0.008 0.005 200 1800 449T 10:1 1785 239 78 95.8 588 471 2375 18.5 0.064 0.18 3.7 0.007 0.005 200 1200 449T 10:1 1185 238 75 95 886 592 1775 17.7 0.076 0.18 3.8 0.01 0.008 250 3600 449TS 10:1 3575 282 68 95.4 368 368 3570 23.5 0.05 0.13 4.1 0.006 0.004 250 1800 449TS 10:1 1785 302 110 95.8 735 589 2380 23.1 0.052 0.141 2.7 0.007 0.004 250 1200 S449SS 10:1 1185 296 90 95 1108 739 1775 22.2 0.092 0.091 3.2 0.007 0.008 300 3600 S449SS 10:1 3575 333 67 95.8 441 441 3575 28.1 0.064 0.062 4.2 0.005 0.004 300 1800 S449SS 10:1 1785 356 115 95.4 882 882 2380 27.7 0.066 0.079 2.4 0.004 0.004 350 3600 S449SS 10:1 3575 392 80 95.4 515 515 3570 32.9 0.05 0.052 3.5 0.004 0.004 350 1800 S449SS 10:1 1785 406 138 95.8 1029 1029 2380 32.3 0.06 0.071 2 0.003 0.004 Prices and specifications are subject to change without notice Efficiency Values are shown for 60 hertz sine wave power. Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 10-15 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Duty - TEFC & TEBC RGKESDI & RGZESDI HP Synch RPM Frame Encl. Speed Range 460 Volts, 40 C Ambient F.L. RPM FL Amps NL Amps Nom. FL Eff. (%) FL Torque (lb-ft) Max Torque Const. HP (lb-ft) Max RPM Const. HP 1000:1 Constant Torque Ohms/Phase (Y equiv.) Circuit Parameters 25ºC X1 X2 XM R1 R2 1 1800 145T TEFC 1000:1 1740 1.4 1.1 82.5 3 1.5 3480 7.12 8.21 335 11.28 7.59 1 1200 182T TEFC 1000:1 1175 1.8 1.5 80 4.5 2.3 2400 5.2 9.40 185 6.28 4.54 1.5 3600 182T TEFC 1000:1 3485 2 1.6 82.5 2.3 1.5 5225 4.34 2.21 193 2.84 2.02 1.5 1800 182T TEFC 1000:1 1740 2.2 1.8 84 4.5 2.2 3480 4.93 8.37 305 5.48 4.45 1.5 1200 184T TEFC 1000:1 1160 2.4 1.9 85.5 6.8 3.4 2320 3.59 7.37 145 4.26 3.43 2 3600 184T TEFC 1000:1 3505 2.5 1.7 84 3 2 5275 2.62 1.54 135 1.86 1.4 2 1800 182T TEFC 1000:1 1740 2.7 1.8 84 6.1 3 3480 3.7 6.07 209 4.32 3.57 2 1200 213T TEFC 1000:1 1160 3.2 2.3 86.5 9.1 4.5 2320 3.24 4.57 130 3.25 1.73 3 3600 213T TEFC 1000:1 3510 3.7 3.3 86.5 4.5 3 5265 2.08 1.46 83.6 1.2 0.71 3 1800 184T TEFC 1000:1 1740 4.2 3.2 87.5 9.1 4.5 3480 2.17 3.78 123 2.58 2.29 3 1200 215T TEFC 1000:1 1160 4.3 3.1 87.5 14 6.8 2320 2.01 2.91 86.8 1.99 1.23 5 3600 215T TEFC 1000:1 3510 5.8 3.5 87.5 7.5 5 5265 1.67 1.27 74 0.97 0.6 5 1800 213T TEFC 1000:1 1760 6.5 4.2 87.5 15 7.5 3520 1.6 3.2 84 1.3 0.92 5 1200 254T TEFC 1000:1 1165 7.1 4.5 88.5 23 11.3 2330 1.66 1.89 54.3 0.82 0.58 5 900 254T TEBC 1000:1 865 7.5 4.1 86.5 30 15 1730 4.09 4.8 68.4 1.46 1.99 7.5 3600 254T TEFC 1000:1 3510 8.7 5 88.5 11 7.5 5265 1.33 1.03 57.6 0.39 0.31 7.5 1800 254T TEFC 1000:1 1775 9.5 7.3 89.5 23 11.1 3550 1.3 2.7 66 0.7 0.52 7.5 1200 256T TEFC 1000:1 1165 10 5 90.2 34 16.8 2330 1.41 1.71 52.1 0.68 0.53 7.5 900 256T TEBC 1000:1 865 12 6.6 87.5 46 23 1730 3 3.69 56.1 0.91 1.47 10 3600 256T TEFC 1000:1 3515 12.5 6 89.5 15 10 5270 0.95 0.8 40.3 0.3 0.27 10 1800 256T TEFC 1000:1 1770 12.5 5.7 89.5 30 15 3500 0.86 1.90 48 0.45 0.38 10 1200 256T TEBC 1000:1 1165 13 10 90.2 45 22 2330 1.41 1.71 52 0.68 0.53 10 900 284T TEBC 1000:1 875 15 9.1 91 60 36 1475 2.02 2.44 35 0.65 0.49 15 3600 254T TEBC 1000:1 3530 18 5 90.2 22 15 5295 1.33 1.03 57.6 0.39 0.31 15 1800 254T TEBC 1000:1 1760 20 7.3 91.7 45 22 3520 0.85 1.61 38.5 0.38 0.34 15 1200 284T TEBC 1000:1 1175 20 10 91 67 40 1955 1.00 1.11 26.3 0.40 0.24 15 900 286T TEBC 1000:1 875 23 14 91 90 54 1475 1.34 1.68 23.8 0.38 0.33 20 3600 256T TEBC 1000:1 3525 23 7.4 90.2 30 20 5285 0.95 0.80 40.3 0.30 0.27 20 1800 256T TEBC 1000:1 1755 27 9.1 91.7 60 30 3510 0.60 1.26 30.7 0.26 0.26 20 1200 286T TEBC 1000:1 1175 26 12 91.7 89 54 1955 0.77 0.93 22.9 0.29 0.21 20 900 324T TEBC 1000:1 880 31 18 91 119 71 1480 1.15 1.68 14.8 0.23 0.193 25 3600 284TS TEBC 1000:1 3525 29 8 91.7 37 25 4700 0.55 1.14 38.5 0.27 0.21 25 1800 284T TEBC 1000:1 1765 29 13 93 74 50 2940 0.55 0.88 22.8 0.19 0.18 25 1200 324T TEBC 1000:1 1180 33 15 92.4 111 67 1965 0.67 0.65 16.1 0.17 0.15 25 900 326T TEBC 1000:1 880 38 22 90.2 149 89 1480 0.95 1.41 12.6 0.174 0.159 30 3600 286TS TEBC 1000:1 3525 34 9.5 91.7 45.0 30 4700 0.42 0.98 33.8 0.2 0.17 30 1800 286T TEBC 1000:1 1765 35 15 93 89 60 2940 0.44 0.75 20.3 0.15 0.15 30 1200 326T TEBC 1000:1 1180 39 19 92.4 134 80 1965 0.56 0.56 13.9 0.15 0.13 30 900 364T TEBC 1000:1 885 47 26 91 178 119 1335 0.77 1.15 9.7 0.144 0.083 40 3600 324TS TEBC 1000:1 3530 46 12 93.6 60 48 4705 0.33 0.60 22.6 0.088 0.100 40 1800 324T TEBC 1000:1 1770 47 15 93.6 119 79 2940 0.38 0.67 18.5 0.110 0.100 40 1200 364T TEBC 1000:1 1180 52 24 93.6 178 119 1770 0.41 0.70 11.6 0.100 0.070 40 900 365T TEBC 1000:1 885 63 36 91.7 237 158 1335 0.56 0.87 7.2 0.094 0.061 Prices and specifications are subject to change without notice Efficiency Values are shown for 60 hertz sine wave power. 10-16 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty - TEFC & TEBC RGKESDI & RGZESDI HP Synch RPM Frame Encl. Speed Range 460 Volts, 40 C Ambient F.L. RPM FL Amps NL Amps Nom. FL Eff. (%) FL Torque (lb-ft) Max Torque Const. HP (lb-ft) Max RPM Const. HP 1000:1 Constant Torque Ohms/Phase (Y equiv.) Circuit Parameters 25ºC X1 X2 XM R1 R2 50 3600 326TS TEBC 1000:1 3530 55 15 93.6 74 60 4705 0.25 0.49 18.8 0.072 0.083 50 1800 326T TEBC 1000:1 1770 58 18 93.6 148 99 2950 0.31 0.54 15.8 0.082 0.082 50 1200 365T TEBC 1000:1 1180 66 30 93.6 223 148 1770 0.32 0.58 10.4 0.081 0.058 50 900 404T TEBC 1000:1 880 67 28 91.7 297 198 1330 0.49 0.82 10.2 0.079 0.071 60 3600 364TS TEBC 1000:1 3565 68 19 93.6 89 89 4455 0.30 0.56 14.8 0.066 0.054 60 1800 364T TEBC 1000:1 1775 71 21 93.6 178 118 2660 0.30 0.46 11.6 0.066 0.051 60 1200 404TS TEBC 1000:1 1185 72 26 94.1 266 177 1775 0.35 0.58 10.8 0.049 0.033 60 900 405TS TEBC 1000:1 880 78 28 91.7 356 237 1330 0.41 0.70 8.8 0.063 0.06 75 3600 365TS TEBC 1000:1 3565 85 22 94.1 111 111 4455 0.20 0.46 12.8 0.045 0.041 75 1800 365T TEBC 1000:1 1775 87 27 94.1 222 148 2660 0.23 0.37 9.2 0.051 0.041 75 1200 405TS TEBC 1000:1 1185 87 34 94.5 332 222 1775 0.26 0.45 8.4 0.035 0.025 75 900 444TS TEBC 1000:1 885 94 37 93 445 297 1335 0.27 0.47 7.5 0.05 0.044 100 3600 405TS TEBC 1000:1 3570 110 19 94.1 147 147 3570 0.21 0.32 16.0 0.034 0.015 100 1800 405TS TEBC 1000:1 1780 113 30 94.5 295 197 2670 0.2 0.37 9.6 0.028 0.016 100 1200 444TS TEBC 1000:1 1185 115 38 94.5 443 296 1775 0.17 0.35 7.3 0.026 0.016 100 900 445TS TEBC 1000:1 885 123 48 94.1 593 395 1335 0.2 0.36 6.1 0.034 0.033 125 3600 444TS TEBC 1000:1 3575 136 32 94.5 184 184 3575 0.14 0.27 8.8 0.018 0.010 125 1800 444TS TEBC 1000:1 1785 143 42 95 368 245 2675 0.14 0.33 6.7 0.017 0.011 125 1200 445TS TEBC 1000:1 1185 144 44 94.5 554 370 1775 0.14 0.29 6.2 0.02 0.013 125 900 447TS TEBC 1000:1 885 152 54 93.6 742 495 1335 0.15 0.29 4.8 0.027 0.026 150 3600 445TS TEBC 1000:1 3575 160 37 95 220 220 3575 0.1 0.21 7.2 0.012 0.007 150 1800 445TS TEBC 1000:1 1785 169 45 95.8 441 294 2675 0.12 0.3 6.1 0.015 0.009 150 1200 447TS TEBC 1000:1 1185 169 45 95 665 444 1775 0.13 0.28 6.1 0.017 0.012 150 900 447TS TEBC 1000:1 885 186 72 94.1 890 593 1335 0.12 0.23 3.5 0.022 0.021 200 3600 447TS TEBC 1000:1 3575 208 40 95 294 294 3575 0.087 0.2 7.0 0.01 0.006 200 1800 447TS TEBC 1000:1 1785 223 60 95.8 588 471 2375 0.085 0.22 4.6 0.01 0.007 200 1200 449TS TEBC 1000:1 1185 222 55 95 886 592 1775 0.092 0.21 4.8 0.013 0.009 200 900 449TS TEBC 1000:1 885 241 101 94.5 1186 791 1335 0.100 0.19 3.1 0.018 0.018 250 3600 449TS TEBC 1000:1 3570 264 45 95.4 368 368 3570 0.690 0.17 6.4 0.008 0.005 250 1800 449TS TEBC 1000:1 1785 282 78 95.8 735 589 2380 0.064 0.18 3.7 0.007 0.005 250 1200 449TS TEBC 1000:1 1185 285 75 95 1108 739 1775 0.076 0.18 3.8 0.01 0.008 250 900 S449SS TEBC 1000:1 885 303 111 94.5 1483 989 1335 0.110 0.11 2.7 0.009 0.012 300 3600 449TS TEBC 1000:1 3575 330 68 95.8 441 441 3575 0.051 0.13 4.1 0.006 0.004 300 1800 449TS TEBC 1000:1 1785 345 110 95.4 882 706 2380 0.052 0.141 2.7 0.007 0.004 300 1200 S449SS TEBC 1000:1 1185 335 90 95 1329 886 1775 0.092 0.091 3.2 0.007 0.008 350 3600 S449SS TEBC 1000:1 3570 370 67 95.4 515 515 3570 0.064 0.062 4.2 0.005 0.004 350 1800 S449SS TEBC 1000:1 1785 390 115 95.8 1029 825 2380 0.066 0.079 2.4 0.004 0.004 350 1200 S449SS TEBC 1000:1 1185 396 133 95 1551 1034 1775 0.069 0.067 2.3 0.005 0.006 400 3600 S449SS TEBC 1000:1 3570 420 80 95.4 588 588 3570 0.052 0.052 3.5 0.004 0.004 400 1800 S449SS TEBC 1000:1 1785 450 138 95.8 1176 942 2380 0.060 0.071 2.0 0.003 0.004 Prices and specifications are subject to change without notice Efficiency Values are shown for 60 hertz sine wave power. 2009-2010 Low Voltage AC Selection and Pricing Guide 10-17 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions Purpose P-Base (VSS) RGZVESD / RGZVILESD HP Synch RPM F.L. RPM Frame No Load Current [A] Full Load 460 Volts, NEMA Design B, 40 C Ambient Lckd Rotor kva/ HP Code Nominal Efficiency (%) Power Factor (%) ½ ¾ Full Load ½ ¾ Full Full Load Load (lb-ft) Torque Lckd Rotor (%) Break- Down (%) Vertical LR Stall Time Hot (Sec) Cold (Sec) Winding Conn. 1 1800 1745 143 1 1.5 13 L 78.5 81.6 82.5 54 67 76 3 275 320 16 35 wye 1 1200 1160 145 1 1.6 10 J 79.9 82.3 82.5 48 62 79 4.5 240 300 19 31 wye 1 900 860 182 1.2 1.9 8 H 75.1 77.4 77 43 55 64 6.1 220 260 20 40 wye 1.5 3600 3520 143 1 1.9 18 L 76.5 80.7 82.5 76 85 90 2.2 270 320 15 33 wye 1.5 1800 1750 145 1.3 2.2 19 L 81.5 83.6 84 55 68 76 4.5 290 320 15 32 wye 1.5 1200 1160 182 1.5 2.3 16 K 80.2 82.7 84 51 65 73 6.8 280 320 22 33 wye 1.5 900 855 184 1.8 2.6 13 H 76.5 78.9 78.5 46 59 69 9.2 220 270 18 30 wye 2 3600 3515 145 1.1 2.5 22 K 79.4 82.9 84 75 84 89 3 260 320 15 33 wye 2 1800 1740 145 1.5 2.7 21 K 83.2 84.5 84 61 74 82 6 260 310 13 27 wye 2 1200 1160 184 1.9 3 22 K 83.5 85 85.5 51 64 73 9.1 220 300 21 32 wye 2 900 865 213 2.2 3.3 17 H 79 81 81.5 47 61 70 12 200 290 18 30 wye 3 3600 3510 182 1.7 3.6 32 K 82.8 85.2 85.5 76 85 91 4.5 230 320 15 34 wye 3 1800 1740 182 1.8 3.9 30 K 86.5 87 86.5 66 77 83 9.1 260 300 16 35 wye 3 1200 1165 213 2.3 4 32 K 84.8 86.6 86.5 59 74 81 14 210 300 17 35 wye 3 900 865 215 3.1 4.7 26 H 81 82.7 82.5 49 63 72 18 190 280 15 32 wye 5 3600 3490 184 1.8 5.8 46 J 85.5 86.8 86.5 83 90 93 8 260 320 12 26 wye 5 1800 1730 184 3.2 6.5 46 J 86.5 87.2 86.5 64 76 83 15 260 300 17 36 wye 5 1200 1160 215 3.3 6.8 46 J 88 88.7 87.5 60 72 79 23 210 300 14 29 wye 5 900 865 254 4.1 7.5 40 H 85 86 85.5 54 67 73 30 180 260 13 25 wye 7.5 3600 3515 213 3.4 8.8 64 H 86 87 87.5 78 87 91 11 190 280 11 25 wye 7.5 1800 1750 213 4.2 9.5 64 H 88 89 88.5 66 78 84 23 210 270 14 29 wye 7.5 1200 1170 254 4.5 9.8 60 H 88.9 89.2 88.5 61 75 81 34 180 250 18 35 wye 7.5 900 865 256 6.6 11.5 64 H 86 87 86.5 50 62 70 46 190 260 15 30 wye 10 3600 3505 215 4 12 81 H 88 88.8 88.5 81 90 88 15 190 260 14 29 wye 10 1800 1750 215 5.4 12.5 81 H 88.5 89 88.5 69 80 85 30 210 270 15 30 wye 10 1200 1165 256 5 13 75 G 90 89.8 88.5 66 76 81 45 170 250 18 35 wye 10 900 875 284 9.1 15 81 H 87.9 89.4 89.5 51 62 70 60 150 220 15 30 delta 15 3600 3530 254 5 17 116 G 86.8 88.3 88.5 85 91 93 22 190 260 17 31 wye 15 1800 1760 254 7.3 19 116 G 90.2 90.6 90.2 69 79 83 45 190 260 18 35 wye 15 1200 1175 284 10 20 116 G 89.5 90.2 89.5 58 72 79 67 160 270 20 45 delta 15 900 875 286 14 23 116 G 88.6 89.9 89.5 51 61 68 90 150 220 18 35 delta 20 3600 3525 256 7.4 23 145 G 86.6 88.2 88.5 84 88 92 30 180 260 17 25 wye 20 1800 1755 256 9.1 26 145 G 90.6 90.9 90.2 68 77 81 60 190 270 18 35 wye 20 1200 1175 286 12 26 145 G 90.6 90.9 90.2 63 74 80 89 160 250 19 43 delta 20 900 880 324 18 31 145 G 88.5 89.7 89.5 51 62 68 119 140 200 15 35 delta 25 3600 3525 284 8 29 183 G 90.5 90.7 90.2 81 86 90 37 160 250 16 30 delta 25 1800 1765 284 13 29 183 G 92 92.3 91.7 73 83 88 74 220 280 19 40 delta 25 1200 1180 324 15 33 183 G 90.8 91.3 91 58 70 78 111 170 240 25 50 delta 25 900 880 326 22 38 183 G 87.5 88.8 88.5 51 63 70 149 150 200 22 40 delta 30 3600 3525 286 9.5 34 218 G 90.5 90.7 90.2 86 91 92 45 160 250 16 30 delta 30 1800 1765 286 15 35 218 G 91.9 92.3 91.7 73 84 88 89 220 280 19 40 delta 30 1200 1180 326 19 39 218 G 91.2 91.5 91 59 71 79 134 170 240 25 50 delta 30 900 885 364 26 47 218 G 88.4 89.8 89.5 51 63 67 178 150 200 22 40 delta Prices and specifications are subject to change without notice 10-18 2009-2010 Low Voltage AC Selection and Pricing Guide

Purpose P-Base (VSS) RGZVESD / RGZVILESD HP Synch RPM Current [A] kva/ F.L. RPM Frame HP No Full Lckd Code Load Load Rotor 460 Volts, NEMA Design B, 40 C Ambient Nominal Efficiency (%) Power Factor (%) ½ ¾ Full Load ½ ¾ Full Full Load Load (lb-ft) Torque Lckd Rotor (%) Break- Down (%) Vertical LR Stall Time Hot (Sec) Cold (Sec) Winding Conn. 40 3600 3530 324 12 45 290 G 92.8 92.9 92.4 81 88 90 60 150 250 22 45 delta 40 1800 1770 324 15 47 290 G 92.8 93 92.4 78 83 86 119 190 240 20 40 delta 40 1200 1180 364 24 52 290 G 92.4 92.7 92.4 60 72 78 178 170 230 29 55 delta 40 900 885 365 36 63 290 G 89.2 90.5 90.2 50 61 66 237 150 200 25 40 delta 50 3600 3530 326 15 55 363 G 92.9 93 92.4 83 90 92 74 150 250 18 37 delta 50 1800 1770 326 18 58 363 G 92.9 93 92.4 78 88 87 148 190 240 20 40 delta 50 1200 1180 365 30 66 363 G 92.8 93 92.4 61 72 77 223 170 230 29 55 delta 50 900 885 404 28 67 363 G 90.8 90.9 90.2 65 74 78 297 140 200 25 45 delta 60 3600 3565 364 19 68 435 G 92.6 92.9 92.4 81 87 89 89 160 250 16 28 delta 60 1800 1775 364 21 71 435 G 92.7 92.9 92.4 75 83 86 178 160 240 22 45 delta 60 1200 1185 404 26 74 435 G 93 93.4 93 71 79 82 266 150 200 25 50 delta 60 900 885 405 30 78 435 G 90.8 90.9 90.2 68 77 80 356 140 200 30 35 delta 75 3600 3565 365 22 85 543 G 93.2 93.4 93 82 87 89 111 160 260 16 27 delta 75 1800 1775 365 27 87 543 G 93.3 93.5 93 75 84 86 222 155 240 22 45 delta 75 1200 1185 405 34 93 543 G 93.8 94 93.6 69 78 81 332 150 200 33 45 delta 75 900 885 444 37 94 543 G 91.6 92 91.7 68 77 82 445 135 200 25 32 delta 100 3600 3570 405 19 108 725 G 93.5 93.6 93 91 93 93 147 120 200 25 45 delta 100 1800 1780 405 30 113 725 G 94 94.3 93.6 81 86 88 295 160 200 25 35 delta 100 1200 1185 444 38 117 725 G 93.7 94 93.6 76 83 86 443 140 200 30 35 delta 100 900 885 445 48 123 725 G 93.1 93.4 93 71 79 82 593 130 200 22 30 delta 125 3600 3575 444 32 138 908 G 93.1 93.7 93.6 86 90 91 184 120 200 18 23 delta 125 1800 1785 444 42 143 908 G 94.2 94.4 94.1 79 85 87 368 160 200 20 25 delta 125 1200 1185 445 44 144 908 G 93.8 94 93.6 79 85 87 554 140 200 25 35 delta 125 900 885 447 54 152 908 G 92.9 93 92.4 71 80 83 742 130 200 20 40 delta 150 3600 3575 445 37 164 1085 G 93.9 94.3 94.1 85 90 91 220 120 200 15 18 delta 150 1800 1785 445 45 170 1085 G 94.4 94.7 94.5 81 86 87 441 150 200 20 30 delta 150 1200 1185 447 45 170 1085 G 94.5 94.7 94.1 82 87 88 665 125 200 28 43 delta 150 900 885 447 72 186 1085 G 93 93.4 93 68 77 81 890 130 200 20 25 delta 200 3600 3575 447 40 216 1450 G 94 94.3 94.1 89 91 92 294 120 200 16 20 delta 200 1800 1785 447 60 225 1450 G 94.7 94.8 94.5 82 87 88 588 150 200 18 25 delta 200 1200 1185 449 55 226 1450 G 94.5 94.6 94.1 83 87 88 886 125 200 25 32 delta 200 900 885 449 101 241 1450 G 93.8 94 93.6 72 80 83 1186 125 200 15 25 delta 250 3600 3570 449 45 267 1825 G 94 94.3 94.1 91 93 93 368 120 200 12 18 delta 250 1800 1785 449 78 281 1825 G 94.5 94.7 94.5 81 86 88 735 140 200 18 25 delta 250 1200 1185 449 75 280 1825 G 94.5 94.6 94.1 83 88 89 1108 120 200 20 25 delta Prices and specifications are subject to change without notice Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 10-19 Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions IEC - TEFC 1LA7 Standard Efficiency (eff 2) kw RPM 50HZ 50Hz 60Hz Synch. F.L. 400 Volts, 50Hz - 40 C Ambient Frame Current [A] 50Hz Full Load Locked Rotor Nominal Efficiency 50Hz 10-20 2009-2010 Low Voltage AC Selection and Pricing Guide Power Factor 50Hz 4/4 3/4 4/4 Full Load Torque [Nm] 50Hz Locked Rotor Break Down J [ Kg m 2 ] Lpf [ db(a) ] 0.06 0.07 1500 1350 56M 0.20 2.6 56.0 55.0 0.77 0.4 1.9 1.9 0.000 42 0.09 0.11 3000 2830 56M 0.26 3.7 63.0 62.0 0.81 0.3 2.0 2.3 0.000 41 0.09 0.11 1500 1350 56M 0.29 2.6 58.0 57.0 0.77 0.6 1.9 1.9 0.000 42 0.09 0.1 1000 850 63M 0.44 2.0 45.0 41.5 0.66 1.0 1.8 1.9 0.000 39 0.09 0.1 750 630 71M 0.36 2.2 53.0 54.5 0.68 1.4 1.9 1.7 0.001 36 0.12 0.14 3000 2800 56M 0.32 3.7 65.0 64.0 0.83 0.4 2.1 2.4 0.000 41 0.12 0.14 1500 1350 63M 0.42 2.8 55.0 54.0 0.75 0.9 1.9 2.0 0.000 42 0.12 0.14 750 645 71M 0.51 2.2 53.0 49.5 0.64 1.8 2.2 2.0 0.001 36 0.18 0.21 3000 2820 63M 0.50 3.7 63.0 62.0 0.82 0.6 2.0 2.2 0.000 49 0.18 0.21 1500 1350 63M 0.56 3.0 60.0 60.0 0.77 1.3 1.9 1.9 0.000 42 0.18 0.21 1000 835 71M 0.67 2.3 53.0 54.5 0.73 2.0 2.1 1.9 0.001 39 0.18 0.21 750 675 80M 0.75 2.3 51.0 49.5 0.68 2.5 1.7 1.9 0.001 41 0.25 0.29 3000 2830 63M 0.68 4.0 65.0 65.0 0.82 0.8 2.0 2.2 0.000 49 0.25 0.29 1500 1350 71M 0.77 3.0 60.0 60.0 0.78 1.8 1.9 1.9 0.001 44 0.25 0.29 1000 829 71M 0.79 2.7 60.0 58.5 0.76 2.8 2.2 2.0 0.001 39 0.25 0.29 750 685 80M 1.02 2.6 55.0 50.5 0.64 3.5 2.0 2.2 0.002 41 0.37 0.43 3000 2740 71M 1.00 3.5 66.0 65.0 0.82 1.3 2.3 2.3 0.000 52 0.37 0.43 1500 1369 71M 1.06 3.3 65.0 65.0 0.78 2.6 1.9 2.1 0.001 44 0.37 0.43 1000 919 80M 1.20 3.1 62.0 60.5 0.72 3.8 1.9 2.1 0.001 40 0.37 0.43 750 675 90S 1.14 2.9 63.0 62.0 0.75 5.2 1.6 1.8 0.002 41 0.55 0.63 3000 2800 71M 1.36 4.3 71.0 70.0 0.82 1.9 2.5 2.6 0.000 52 0.55 0.63 1500 1395 80M 1.46 3.9 67.0 67.0 0.81 3.8 2.2 2.2 0.001 47 0.55 0.63 1000 910 80M 1.60 3.4 67.0 66.5 0.74 5.8 2.1 2.2 0.002 40 0.55 0.63 750 675 90L 1.58 3.0 66.0 65.0 0.76 7.8 1.7 1.9 0.003 41 0.75 0.86 3000 2854 80M 1.73 5.6 73.0 72.0 0.86 2.5 2.3 2.4 0.001 56 0.75 0.86 1500 1395 80M 1.91 4.2 72.0 72.0 0.80 5.1 2.3 2.3 0.002 47 0.75 0.86 1000 915 90S 2.05 3.7 69.0 69.0 0.76 7.8 2.2 2.2 0.002 43 0.75 0.86 750 679 100L 2.15 3.0 66.0 65.0 0.76 11.0 1.6 1.9 0.005 45 1.1 1.3 3000 2845 80M 2.40 6.1 77.0 77.0 0.87 3.7 2.6 2.7 0.001 56 1.1 1.3 1500 1414 90S 2.55 4.6 77.0 77.0 0.81 7.4 2.3 2.4 0.002 48 1.1 1.3 1000 915 90L 2.85 3.8 72.0 72.0 0.77 11.0 2.3 2.3 0.003 43 1.1 1.30 750 679 100L 2.90 3.3 72.0 72.0 0.76 15.0 1.8 2.1 0.006 45 1.5 1.75 3000 2860 90S 3.25 5.5 79.0 80.0 0.85 5.0 2.4 2.7 0.001 60 1.5 1.75 1500 1420 90L 3.40 5.3 79.0 79.0 0.81 10.0 2.4 2.6 0.003 48 1.5 1.75 1000 925 100L 3.90 4.0 74.0 74.0 0.75 15.0 2.3 2.3 0.005 47 1.5 1.75 750 705 112M 3.85 3.7 74.0 74.0 0.76 20.0 1.8 2.1 0.013 49 2.2 2.55 3000 2880 90L 4.55 6.3 82.0 82.0 0.85 7.3 2.8 3.1 0.002 60 2.2 2.55 1500 1420 100L 4.70 5.6 82.0 82.5 0.82 15.0 2.5 2.8 0.005 53 2.2 2.55 1000 940 112M 5.20 4.6 78.0 78.5 0.78 22.0 2.2 2.5 0.009 52 2.2 2.55 750 700 132S 5.70 3.9 75.0 75.0 0.74 30.0 1.9 2.3 0.014 53 3 3.45 3000 2890 100L 6.10 6.8 84.0 84.0 0.85 9.9 2.8 3.0 0.004 62 3 3.45 1500 1420 100L 6.40 5.6 83.0 83.5 0.82 20.0 2.7 3.0 0.006 53 3 3.45 1000 949 132S 7.20 4.2 79.0 79.5 0.76 30.0 1.9 2.2 0.015 63 3 3.45 750 700 132M 7.60 4.1 77.0 77.5 0.74 41.0 2.1 2.4 0.019 53 Prices and specifications are subject to change without notice CEMEP Eff2

IEC - TEFC 1LA7 Standard Efficiency (eff 2) kw RPM 50HZ 50Hz 60Hz Synch. F.L. 400 Volts, 50Hz - 40 C Ambient Frame Current [A] 50Hz Full Load Locked Rotor Nominal Efficiency 50Hz Power Factor 50Hz 4/4 3/4 4/4 Full Load Torque [Nm] 50Hz Locked Rotor Break Down J [ Kg m 2 ] Lpf [ db(a) ] 4 4.6 3000 2905 112M 7.80 7.2 86.0 86.0 0.86 13.0 2.6 2.9 0.006 63 4 4.6 1500 1440 112M 8.20 6.0 85.0 85.5 0.83 27.0 2.7 3.0 0.012 53 4 4.6 1000 949 132M 9.40 4.5 80.5 80.5 0.76 40.0 2.1 2.4 0.019 63 4 4.6 750 715 160M 10.00 4.5 80.0 80.0 0.72 53.0 2.2 2.6 0.036 63 5.5 6.3 3000 2925 132S 10.40 5.9 86.5 86.5 0.89 18.0 2.0 2.8 0.015 68 5.5 6.3 1500 1455 132S 11.40 6.3 86.0 86.0 0.81 36.0 2.5 3.1 0.018 62 5.5 6.3 1000 949 132M 12.60 5.0 83.0 83.0 0.76 55.0 2.3 2.6 0.025 63 5.5 6.3 750 709 160M 13.00 4.7 83.5 83.5 0.73 74.0 2.3 2.7 0.046 63 7.5 8.6 3000 2930 132S 13.80 6.9 88.0 88.0 0.89 24.0 2.3 3.0 0.019 68 7.5 8.6 1500 1455 132M 15.20 6.7 87.0 87.5 0.82 49.0 2.7 3.2 0.023 62 7.5 8.6 1000 960 160M 17.00 4.6 86.0 86.0 0.74 75.0 2.1 2.5 0.044 66 7.5 8.6 750 715 160L 17.60 5.3 85.5 85.5 0.72 100.0 2.7 2.7 0.064 63 11 12.6 3000 2930 160M 20.00 6.5 89.5 89.5 0.88 36.0 2.1 2.9 0.034 70 11 12.6 1500 1459 160M 21.50 6.2 88.5 89.0 0.84 72.0 2.2 2.7 0.043 66 11 12.6 1000 960 160L 24.50 4.8 87.5 87.5 0.74 109.0 2.3 2.6 0.063 66 15 17.3 3000 2940 160M 26.50 6.6 90.0 90.2 0.90 49.0 2.2 3.0 0.043 70 15 17.3 1500 1459 160L 28.50 6.5 90.0 90.2 0.84 98.0 2.6 3.0 0.055 66 18.5 21.3 3000 2940 160L 32.00 7.0 91.0 91.2 0.91 60.0 2.4 3.1 0.051 70 Prices and specifications are subject to change without notice CEMEP Eff2 Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 10-21 Dimensions

Introduction General Purpose Duty Duty Purpose IEC - TEFC 1LA6 Standard Efficiency (eff 2) kw RPM 50Hz 50Hz 60Hz Synch. F.L. 400 Volts, 50Hz - 40 C Ambient Frame Current [A] 50Hz Full Load Locked Rotor Nominal Efficiency 50Hz Power Factor 50Hz 4/4 3/4 4/4 Full Load Torque [Nm] 50Hz Locked Rotor Break Down J [ Kg m 2 ] 0.75 0.86 750 679 100L 2.15 3.0 66.0 65.0 0.76 11.0 1.6 1.9 0.005 45 Lpf [ db(a) ] 1.1 1.30 750 679 100L 2.90 3.3 72.0 72.0 0.76 15.0 1.8 2.1 0.006 45 1.5 1.75 1000 925 100L 3.90 4.0 74.0 74.0 0.75 15.0 2.3 2.3 0.005 47 1.5 1.75 750 705 112M 3.85 3.7 74.0 74.0 0.76 20.0 1.8 2.1 0.013 49 2.2 2.55 1500 1420 100L 4.70 5.6 82.0 82.5 0.82 15.0 2.5 2.8 0.005 53 2.2 2.55 1000 940 112M 5.20 4.6 78.0 78.5 0.78 22.0 2.2 2.5 0.009 52 2.2 2.55 750 700 132S 5.70 3.9 75.0 75.0 0.74 30.0 1.9 2.3 0.014 53 3 3.45 3000 2890 100L 6.10 6.8 84.0 84.0 0.85 9.9 2.8 3.0 0.004 62 3 3.45 1500 1420 100L 6.40 5.6 83.0 83.5 0.82 20.0 2.7 3.0 0.006 53 3 3.45 1000 949 132S 7.20 4.2 79.0 79.5 0.76 30.0 1.9 2.2 0.015 63 3 3.45 750 700 132M 7.60 4.1 77.0 77.5 0.74 41.0 2.1 2.4 0.019 53 4 4.6 3000 2905 112M 7.80 7.2 86.0 86.0 0.86 13.0 2.6 2.9 0.006 63 4 4.6 1500 1440 112M 8.20 6.0 85.0 85.5 0.83 27.0 2.7 3.0 0.012 53 4 4.6 1000 949 132M 9.40 4.5 80.5 80.5 0.76 40.0 2.1 2.4 0.019 63 4 4.6 750 715 160M 10.00 4.5 80.0 80.0 0.72 53.0 2.2 2.6 0.036 63 5.5 6.3 3000 2925 132S 10.40 5.9 86.5 86.5 0.89 18.0 2.0 2.8 0.015 68 5.5 6.3 1500 1455 132S 11.40 6.3 86.0 86.0 0.81 36.0 2.5 3.1 0.018 62 5.5 6.3 1000 949 132M 12.60 5.0 83.0 83.0 0.76 55.0 2.3 2.6 0.025 63 5.5 6.3 750 709 160M 13.00 4.7 83.5 83.5 0.73 74.0 2.3 2.7 0.046 63 7.5 8.6 3000 2929 132S 13.80 6.9 88.0 88.0 0.89 24.0 2.3 3.0 0.019 68 7.5 8.6 1500 1455 132M 15.20 6.7 87.0 87.5 0.82 49.0 2.7 3.2 0.023 62 7.5 8.6 1000 960 160M 17.00 4.6 86.0 86.0 0.74 75.0 2.1 2.5 0.044 66 7.5 8.6 750 715 160L 17.60 5.3 85.5 85.5 0.72 100.0 2.7 3.0 0.064 63 11 12.6 3000 2940 160M 20.00 6.5 89.5 89.5 0.88 36.0 2.1 2.9 0.034 70 11 12.6 1500 1459 160M 21.50 6.2 88.5 89.0 0.84 72.0 2.2 2.7 0.043 66 11 12.6 1000 960 160L 24.50 4.8 87.5 87.5 0.74 109.0 2.3 2.6 0.063 66 15 17.3 3000 2940 160M 26.50 6.6 90.0 90.2 0.90 49.0 2.2 3.0 0.043 70 15 17.3 1500 1459 160L 28.50 6.5 90.0 90.2 0.84 98.0 2.6 3.0 0.055 66 18.5 21.3 3000 2940 160L 32.00 7.0 91.0 91.2 0.91 60.0 2.4 3.1 0.051 70 Prices and specifications are subject to change without notice CEMEP Eff1 Dimensions 10-22 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFC 1LA9 Standard Efficiency (eff 1) kw Synch. RPM F.L. 400 Volts, 50Hz - 40 C Frame Current [A] Full Load Locked Rotor Nominal Efficiency Power Factor 4/4 3/4 4/4 Full Load Torque [Nm] Locked Rotor Break Down J [ Kg m 2 ] Lpf [ db(a) ] 0.06 1500 1380 56M 0.22 3.1 61.0 61.0 0.66 0.4 2.7 2.8 0.000 42 0.09 3000 2830 56M 0.24 4.5 70.0 70.0 0.76 0.3 3.6 3.0 0.000 41 0.09 1500 1390 56M 0.31 3.2 62.0 62.0 0.68 0.6 2.8 2.8 0.000 42 0.12 3000 2830 56M 0.31 4.3 69.0 69.0 0.81 0.4 3.2 2.8 0.000 41 0.12 1500 1395 63M 0.41 3.5 66.0 66.0 0.65 0.8 2.7 2.6 0.000 42 0.18 3000 2839 63M 0.48 4.8 70.0 70.0 0.78 0.6 2.8 3.1 0.000 49 0.18 1500 1395 63M 0.59 3.6 65.0 65.0 0.68 1.3 3.0 2.5 0.000 42 0.25 3000 2840 63M 0.63 4.9 72.0 72.0 0.80 0.8 2.5 2.5 0.000 49 0.25 1500 1410 71M 0.81 4.3 70.0 70.0 0.64 1.7 3.6 3.1 0.001 44 0.37 3000 2839 71M 0.94 6.5 74.0 74.0 0.77 1.2 3.3 3.1 0.000 52 0.37 1500 1384 71M 1.04 4.2 71.0 71.0 0.73 2.6 3.3 3.0 0.001 44 0.55 3000 2835 71M 1.42 6.3 75.0 75.0 0.75 1.9 3.6 2.9 0.001 52 0.55 1500 1410 80M 1.32 5.6 77.0 77.0 0.78 3.7 3.4 2.9 0.002 47 0.75 3000 2869 80M 1.66 8.3 80.0 80.0 0.82 2.5 4.4 3.2 0.001 56 0.75 1500 1399 80M 1.78 5.8 81.0 81.0 0.75 5.1 4.0 3.5 0.002 47 0.75 1000 925 90S 2.00 4.4 75.5 75.5 0.72 7.7 3.0 2.5 0.003 43 1.1 3000 2860 80M 2.10 7.0 84.0 84.0 0.89 3.7 3.8 3.2 0.001 56 1.1 1500 1440 90S 2.45 6.4 84.0 84.0 0.77 7.3 3.1 3.2 0.003 48 1.1 1000 940 90L 2.75 5.7 82.0 82.0 0.70 11.0 3.7 3.2 0.005 43 1.5 3000 2890 90S 2.95 7.0 85.0 85.0 0.87 5.0 4.1 3.5 0.002 60 1.5 1500 1440 90L 3.30 6.7 85.0 85.0 0.77 9.9 3.6 3.4 0.004 48 1.5 1000 949 100L 3.65 6.2 85.0 85.0 0.70 15.0 3.5 3.4 0.007 47 2.2 3000 2890 90L 4.20 7.0 86.5 86.5 0.87 7.3 4.1 3.5 0.002 60 2.2 1500 1435 100L 4.50 7.0 86.5 86.5 0.82 15.0 3.4 3.6 0.006 53 2.2 1000 955 112M 5.40 6.2 84.0 84.0 0.70 22.0 2.9 3.0 0.014 52 3 3000 2890 100L 5.70 7.0 87.0 87.0 0.88 9.9 3.4 3.2 0.004 62 3 1500 1435 100L 6.10 7.0 87.5 87.7 0.81 20.0 3.8 3.9 0.008 53 4 3000 2905 112M 7.30 7.0 88.5 88.5 0.89 13.0 2.8 3.2 0.008 63 4 1500 1440 112M 8.10 6.9 88.5 89.0 0.81 27.0 3.2 3.2 0.014 53 4 1000 949 132M 8.50 6.3 84.0 84.0 0.81 40.0 3.0 2.7 0.025 63 5.5 3000 2929 132S 9.90 7.0 89.5 89.5 0.90 18.0 2.7 3.2 0.019 68 5.5 1500 1455 132S 10.60 7.0 89.5 89.5 0.84 36.0 3.2 3.6 0.023 62 5.5 1000 960 132M 12.00 7.3 86.0 86.0 0.77 55.0 3.7 3.6 0.03 63 7.5 3000 2929 132S 13.00 7.0 90.5 90.5 0.92 24.0 2.8 3.1 0.024 68 7.5 1500 1455 132M 14.20 7.0 90.3 90.5 0.84 49.0 3.4 3.6 0.029 62 7.5 1000 964 160M 17.00 5.5 88.0 88.0 0.72 74.0 2.4 2.5 0.063 66 11 3000 2944 160M 19.40 7.0 91.0 91.0 0.90 36.0 2.5 3.1 0.044 70 11 1500 1459 160M 20.50 6.9 91.5 92.0 0.85 72.0 2.6 3.2 0.055 66 11 1000 960 160L 23.00 6.9 88.5 88.5 0.78 109.0 3.1 3.2 0.007 66 15 3000 2944 160M 26.50 7.0 91.5 91.5 0.90 49.0 2.5 3.1 0.051 70 15 1500 1459 160L 27.50 7.0 92.0 92.3 0.86 98.0 2.8 3.3 0.072 66 18.5 3000 2940 160L 31.50 7.0 92.3 92.5 0.92 60.0 2.4 3.1 0.065 70 Prices and specifications are subject to change without notice 2009-2010 Low Voltage AC Selection and Pricing Guide CEMEP Eff1 10-23 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions IEC - TEFC 1LA9 Standard Efficiency (eff 1) HP Synch. RPM F.L. 460 Volts, 60Hz - 40 C Frame Current [A] Full Load Locked Rotor Nominal Efficiency Power Factor 4/4 4/4 Full Load Torque [Nm] Locked Rotor Break Down J [ Kg m 2 ] Lpf [ db(a) ] EPAct Nr. CC032A 0.08 1800 1715 56M 0.18 3.4 63.0 0.65 0.3 2.7 3.0 0.000 46 0.12 3600 3440 56M 0.23 5.5 70.0 0.74 0.3 3.6 3.8 0.000 45 0.12 1800 1725 56M 0.29 3.5 64.0 0.60 0.5 2.8 3.0 0.000 46 0.16 3600 3440 56M 0.28 5.4 71.0 0.76 0.3 3.2 3.4 0.000 45 0.16 1800 1710 63M 0.37 3.9 68.0 0.60 0.7 2.7 2.8 0.000 46 0.25 3600 3440 63M 0.40 4.9 71.0 0.79 0.5 2.8 3.3 0.000 53 0.25 1800 1705 63M 0.54 3.6 66.0 0.63 1.1 3.0 3.1 0.000 46 0.33 3600 3460 63M 0.56 5.0 72.0 0.76 0.7 2.5 2.7 0.000 53 0.33 1800 1730 71M 0.76 4.9 69.0 0.60 1.4 3.6 3.4 0.001 48 0.5 3600 3445 71M 0.86 7.5 72.0 0.75 1.0 3.3 3.4 0.000 56 0.5 1800 1725 71M 0.98 4.9 70.0 0.68 2.1 3.3 3.4 0.001 48 0.75 3600 3445 71M 1.30 7.2 73.0 0.73 1.6 3.4 3.7 0.001 56 0.75 1800 1725 80M 1.24 6.8 75.5 0.74 3.1 3.4 3.6 0.002 51 1 3600 3485 80M 1.52 9.6 75.5 0.82 2.0 4.4 4.4 0.001 60 1 1800 1720 80M 1.59 7.3 82.5 0.75 4.1 4.0 3.9 0.002 51 1 1200 1140 90S 1.78 5.6 80.0 0.66 6.2 3.0 3.0 0.003 47 1.5 3600 3480 80M 1.90 8.6 82.5 0.88 3.1 3.8 3.2 0.001 60 1.5 1800 1755 90S 2.15 7.7 84.0 0.76 6.1 3.1 3.9 0.003 52 2 1200 1150 90L 2.55 6.4 85.5 0.64 9.3 3.7 3.7 0.005 47 2 3600 3510 90S 2.60 8.6 84.0 0.86 4.1 4.1 4.1 0.002 64 2 1800 1775 90L 2.95 8.1 84.0 0.76 14.0 3.6 4.2 0.004 52 2 1200 1160 100L 3.20 7.2 86.5 0.68 12.0 3.5 3.8 0.007 51 3 3600 3510 90L 3.80 8.5 85.5 0.85 6.1 4.1 5.1 0.002 64 3 1800 1750 100L 4.00 8.4 87.5 0.79 12.0 3.4 4.3 0.006 57 3 1200 1160 112M 4.80 7.5 87.5 0.66 18.0 2.9 3.7 0.014 56 4 3600 3510 100L 5.00 8.6 86.5 0.87 8.1 3.4 3.7 0.004 66 4 1800 1750 100L 5.50 8.7 87.5 0.79 16.0 3.8 4.6 0.008 57 5 3600 3540 112M 6.00 9.2 87.5 0.88 10.0 2.8 4.0 0.008 67 5 1800 1755 112M 6.70 8.6 87.5 0.79 20.0 3.2 3.9 0.014 57 5 1200 1160 132M 6.90 7.9 87.5 0.77 31.0 3.0 3.6 0.025 67 7.5 3600 3540 132S 8.70 8.5 88.5 0.90 15.0 2.7 3.8 0.019 72 7.5 1800 1760 132S 9.50 8.7 89.5 0.81 30.0 3.2 4.1 0.023 66 7.5 1200 1160 132M 10.60 8.4 89.5 0.73 46.0 3.7 4.3 0.03 67 10 3600 3540 132S 11.40 8.3 89.5 0.92 20.0 2.8 3.7 0.024 72 10 1800 1760 132M 12.80 8.7 89.5 0.82 40.0 3.4 4.1 0.029 66 10 1200 1165 160M 15.00 6.4 89.5 0.70 61.0 2.4 2.8 0.063 70 15 3600 3555 160M 17.00 8.5 90.2 0.90 30.0 2.5 3.7 0.044 74 15 1800 1765 160M 17.90 8.1 91.0 0.85 61.0 2.6 3.2 0.055 70 15 1200 1165 160L 19.00 8.3 90.2 0.77 92.0 3.1 3.8 0.007 70 20 3600 3555 160M 23.20 8.5 90.2 0.90 40.0 2.5 3.7 0.051 74 20 1800 1765 160L 24.50 8.5 91.0 0.85 81.0 2.8 3.5 0.072 70 25 3600 3550 160L 27.70 8.5 91.0 0.92 50.0 2.4 3.5 0.065 74 Prices and specifications are subject to change without notice 10-24 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFC 1LG6 Standard Efficiency (eff 1) kw RPM RPM F.L. Frame Current [A] Efficiency Cos φ Torque [Nm] Full Load 460 Volts, 60Hz - 40 C - continued Locked Rotor 4/4 3/4 4/4 Full Load Locked Rotor Break Down J [ Kg m 2 ] Lpf [ db(a) ] 11 750 725 180L 23.5 4.6 88.7 89.6 0.76 145 1.7 2.2 0.21 62 15 1000 975 180L 29.5 5.5 90.9 91.7 0.81 147 2.4 2.5 0.2 52 15 750 725 200L 30.5 5.3 89.3 89.8 0.8 198 2.3 2.6 0.37 62 18.5 1500 1470 180M 34.5 6.4 92.6 93.2 0.83 120 2.5 3 0.12 60 18.5 1000 978 200L 36 5.6 91.2 91.8 0.81 181 2.4 2.4 0.29 59 18.5 750 730 225S 36 5.6 91.1 91.8 0.81 242 2.3 2.6 0.55 54 22 3000 2955 180M 38.5 7.2 94.1 94.5 0.88 71 2.5 3.4 0.086 67 22 1500 1470 180L 40.5 6.7 93.2 93.5 0.84 143 2.5 3.1 0.14 60 22 1000 978 200L 42 5.6 91.9 92.5 0.82 215 2.4 2.4 0.36 56 22 750 730 225M 43 5.8 91.6 92.1 0.81 288 2.4 2.8 0.66 58 30 3000 2960 200L 53 7 93.5 93.4 0.88 97 2.4 3.3 0.15 71 30 1500 1470 200L 55 6.7 93.3 93.4 0.85 195 2.6 3.3 0.23 62 30 1000 980 225M 56 6.5 93.2 93.7 0.83 292 2.8 2.9 0.63 54 30 750 735 250M 57 6 92.8 93.3 0.82 390 2.5 2.8 1.1 53 37 3000 2960 200L 64 7.2 94.1 94 0.89 119 2.5 3.3 0.18 71 37 1500 1480 225S 67 6.8 94 94.4 0.85 239 2.7 3 0.4 60 37 1000 985 250M 69 6.8 93.7 94.1 0.83 359 2.9 2.5 0.93 57 37 750 738 280S 71 5.7 93.1 93.3 0.81 479 2.3 2.3 1.4 58 45 3000 2965 225M 77 7.3 94.9 95.1 0.89 145 2.5 3.2 0.27 71 45 1500 1480 225M 81 6.9 94.5 94.7 0.85 290 2.8 3 0.49 60 45 1000 988 280S 81 6.8 94.4 94.6 0.85 435 3 2.7 1.4 58 45 750 738 280M 86 6.1 93.7 94 0.81 582 2.6 2.5 1.6 58 55 3000 2975 250M 93 6.8 95.3 95.3 0.9 177 2.4 3 0.47 71 55 1500 1485 250M 96 7.5 95.1 95.3 0.87 354 2.6 3 0.86 61 55 1000 988 280M 99 7.3 94.6 94.8 0.85 532 3.3 2.9 1.6 58 55 750 740 315S 102 6.3 94.3 94.4 0.82 710 2.5 2.9 2.5 58 75 3000 2975 280S 128 7 95.2 95.2 0.89 241 2.5 3 0.83 73 75 1500 1485 280S 130 6.8 95.1 95.2 0.87 482 2.5 2.9 1.4 67 75 1000 990 315S 138 7.3 95 95 0.83 723 2.8 3 2.5 61 75 750 740 315M 138 6.7 94.5 94.7 0.83 968 2.5 2.9 3.1 58 90 3000 2978 280M 150 7.6 95.6 95.7 0.9 289 2.6 3.1 1 73 90 1500 1486 280M 158 7.5 95.4 95.5 0.86 578 2.7 3.1 1.7 67 90 1000 990 315M 160 7.3 95.3 95.4 0.85 868 2.7 2.9 3.2 61 90 750 740 315L 164 6.3 94.7 95.1 0.84 1161 2.4 2.8 3.9 57 110 3000 2982 315S 182 6.9 95.8 95.7 0.91 352 2.4 2.8 1.4 76 110 1500 1488 315S 190 7.1 95.9 96 0.87 706 2.7 2.9 2.3 65 110 1000 990 315L 196 7.4 95.6 95.7 0.85 1061 2.9 2.9 4 61 110 750 740 315L 200 6.4 94.8 95.1 0.84 1420 2.4 2.6 4.5 57 132 3000 2982 315M 220 7.1 96 95.9 0.91 423 2.6 2.9 1.6 76 132 1500 1488 315M 225 7.3 96.1 96.2 0.88 847 2.7 2.9 2.9 64 132 1000 990 315L 235 7.8 95.8 95.8 0.85 1273 3.1 3.1 4.7 61 132 750 740 315L 240 6.7 94.9 95.2 0.84 1704 2.5 2.9 5.3 58 160 3000 2982 315L 260 7.1 96.4 96.4 0.92 512 2.5 2.9 2.1 76 160 1500 1490 315L 275 7.4 96.3 96.4 0.88 1026 3 3 3.5 64 160 1000 990 315L 280 7.8 95.8 95.9 0.86 1543 3.2 3.1 5.4 64 200 3000 2982 315L 320 6.9 96.5 96.5 0.93 641 2.5 2.8 2.5 76 200 1500 1490 315L 340 7.6 96.4 96.5 0.88 1282 3.2 3 4.2 64 Prices and specifications are subject to change without notice 2009-2010 Low Voltage AC Selection and Pricing Guide CEMEP eff1 10-25 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions IEC - TEFC 1LG6 High Efficiency (eff 1) kw RPM RPM F.L. Frame 400 Volts 50Hz - 40 C Ambient Current [A] Efficiency Cos φ Torque [Nm] Full Load Locked Rotor 4/4 3/4 4/4 10-26 2009-2010 Low Voltage AC Selection and Pricing Guide Full Load Locked Rotor Break Down J [ Kg m 2 ] Lpf [ db(a) ] 11 750 725 180L 23.5 4.6 88.7 89.6 0.76 145 1.7 2.2 0.21 62 15 1000 975 180L 29.5 5.5 90.9 91.7 0.81 147 2.4 2.5 0.2 52 15 750 725 200L 30.5 5.3 89.3 89.8 0.8 198 2.3 2.6 0.37 62 18.5 1500 1470 180M 34.5 6.4 92.6 93.2 0.83 120 2.5 3 0.12 60 18.5 1000 978 200L 36 5.6 91.2 91.8 0.81 181 2.4 2.4 0.29 59 18.5 750 730 225S 36 5.6 91.1 91.8 0.81 242 2.3 2.6 0.55 54 22 3000 2955 180M 38.5 7.2 94.1 94.5 0.88 71 2.5 3.4 0.086 67 22 1500 1470 180L 40.5 6.7 93.2 93.5 0.84 143 2.5 3.1 0.14 60 22 1000 978 200L 42 5.6 91.9 92.5 0.82 215 2.4 2.4 0.36 56 22 750 730 225M 43 5.8 91.6 92.1 0.81 288 2.4 2.8 0.66 58 30 3000 2960 200L 53 7 93.5 93.4 0.88 97 2.4 3.3 0.15 71 30 1500 1470 200L 55 6.7 93.3 93.4 0.85 195 2.6 3.3 0.23 62 30 1000 980 225M 56 6.5 93.2 93.7 0.83 292 2.8 2.9 0.63 54 30 750 735 250M 57 6 92.8 93.3 0.82 390 2.5 2.8 1.1 53 37 3000 2960 200L 64 7.2 94.1 94 0.89 119 2.5 3.3 0.18 71 37 1500 1480 225S 67 6.8 94 94.4 0.85 239 2.7 3 0.4 60 37 1000 985 250M 69 6.8 93.7 94.1 0.83 359 2.9 2.5 0.93 57 37 750 738 280S 71 5.7 93.1 93.3 0.81 479 2.3 2.3 1.4 58 45 3000 2965 225M 77 7.3 94.9 95.1 0.89 145 2.5 3.2 0.27 71 45 1500 1480 225M 81 6.9 94.5 94.7 0.85 290 2.8 3 0.49 60 45 1000 988 280S 81 6.8 94.4 94.6 0.85 435 3 2.7 1.4 58 45 750 738 280M 86 6.1 93.7 94 0.81 582 2.6 2.5 1.6 58 55 3000 2975 250M 93 6.8 95.3 95.3 0.9 177 2.4 3 0.47 71 55 1500 1485 250M 96 7.5 95.1 95.3 0.87 354 2.6 3 0.86 61 55 1000 988 280M 99 7.3 94.6 94.8 0.85 532 3.3 2.9 1.6 58 55 750 740 315S 102 6.3 94.3 94.4 0.82 710 2.5 2.9 2.5 58 75 3000 2975 280S 128 7 95.2 95.2 0.89 241 2.5 3 0.83 73 75 1500 1485 280S 130 6.8 95.1 95.2 0.87 482 2.5 2.9 1.4 67 75 1000 990 315S 138 7.3 95 95 0.83 723 2.8 3 2.5 61 75 750 740 315M 138 6.7 94.5 94.7 0.83 968 2.5 2.9 3.1 58 90 3000 2978 280M 150 7.6 95.6 95.7 0.9 289 2.6 3.1 1 73 90 1500 1486 280M 158 7.5 95.4 95.5 0.86 578 2.7 3.1 1.7 67 90 1000 990 315M 160 7.3 95.3 95.4 0.85 868 2.7 2.9 3.2 61 90 750 740 315L 164 6.3 94.7 95.1 0.84 1161 2.4 2.8 3.9 57 110 3000 2982 315S 182 6.9 95.8 95.7 0.91 352 2.4 2.8 1.4 76 110 1500 1488 315S 190 7.1 95.9 96 0.87 706 2.7 2.9 2.3 65 110 1000 990 315L 196 7.4 95.6 95.7 0.85 1061 2.9 2.9 4 61 110 750 740 315L 200 6.4 94.8 95.1 0.84 1420 2.4 2.6 4.5 57 132 3000 2982 315M 220 7.1 96 95.9 0.91 423 2.6 2.9 1.6 76 132 1500 1488 315M 225 7.3 96.1 96.2 0.88 847 2.7 2.9 2.9 64 132 1000 990 315L 235 7.8 95.8 95.8 0.85 1273 3.1 3.1 4.7 61 132 750 740 315L 240 6.7 94.9 95.2 0.84 1704 2.5 2.9 5.3 58 160 3000 2982 315L 260 7.1 96.4 96.4 0.92 512 2.5 2.9 2.1 76 160 1500 1490 315L 275 7.4 96.3 96.4 0.88 1026 3 3 3.5 64 160 1000 990 315L 280 7.8 95.8 95.9 0.86 1543 3.2 3.1 5.4 64 200 3000 2982 315L 320 6.9 96.5 96.5 0.93 641 2.5 2.8 2.5 76 200 1500 1490 315L 340 7.6 96.4 96.5 0.88 1282 3.2 3 4.2 64 CEMEP eff1

IEC - TEFC 1LG6 High Efficiency (eff 1) HP RPM RPM F.L. Frame 460 Volts 60Hz - 40 C Ambient Current [A] Efficiency Cos φ Torque [Nm] Full Load Locked Rotor 4/4 4/4 Full Load Locked Rotor Break Down J [ Kg m2 ] Lpf [ db(a) ] 2009-2010 Low Voltage AC Selection and Pricing Guide EPAct Nr. CC032A 20 1200 1178 180L 25.5 6.5 91 0.8 121 2.9 3 0.2 57 25 1800 1775 180M 31 7.1 92.4 0.82 100 2.9 3.3 0.12 65 25 1200 1180 200L 32.5 6.5 91.7 0.79 151 2.9 2.7 0.29 65 30 3600 3560 180M 34 7.9 93 0.88 60 2.7 3.7 0.086 72 30 1800 1775 180L 36.5 7.4 92.4 0.83 120 2.8 3.4 0.14 65 30 1200 1180 200L 38.5 6.4 91.7 0.8 181 2.9 2.7 0.36 65 40 3600 3565 200L 46 7.8 91.7 0.88 80 2.7 3.7 0.15 75 40 1800 1775 200L 48 7.7 93 0.84 160 3 3.7 0.23 66 40 1200 1184 225M 49 7.2 93 0.82 241 3.4 3.4 0.63 62 50 3600 3565 200L 57 7.8 92.4 0.89 100 2.8 3.7 0.18 75 50 1800 1785 225S 60 7.5 93.6 0.84 199 3.1 3.4 0.4 65 50 1200 1184 225M 61 7.6 93 0.83 301 3.2 3.4 0.76 61 50 1200 1186 250M 61 7.4 93 0.82 300 3.4 2.9 0.93 63 60 3600 3570 225M 67 8.3 93.6 0.89 120 2.8 3.6 0.27 74 60 1800 1785 225M 70 7.9 94.1 0.85 239 3.3 3.5 0.49 65 60 1200 1186 250M 73 7.4 93.6 0.82 361 3.4 2.9 1.07 65 60 1200 1190 280S 72 7.7 94.1 0.83 359 3.6 3.1 1.4 62 75 3600 3570 225M 83 8.7 94.5 0.9 150 3.3 3.7 0.32 74 75 3600 3578 250M 84 7.5 93.6 0.89 149 2.7 3.2 0.47 75 75 1800 1785 225M 88 7.8 94.1 0.85 299 3 3.3 0.66 64 75 1800 1790 250M 86 8.2 94.5 0.86 298 2.9 3.4 0.86 68 75 1200 1190 280M 89 8.3 94.5 0.83 449 3.9 3.3 1.6 62 100 3600 3580 250M 112 8.4 94.1 0.89 199 2.8 3.5 0.57 79 100 3600 3580 280S 110 7.9 95 0.89 199 2.8 3.4 0.83 77 100 1800 1788 250M 116 8.1 94.5 0.86 398 3 3.3 0.99 72 100 1800 1788 280S 114 7.6 94.5 0.86 398 2.9 3.2 1.4 71 100 1200 1190 280M 118 8.4 94.5 0.84 599 4 3.3 1.94 64 100 1200 1191 315S 120 8.4 94.5 0.82 598 3.3 3.4 2.5 66 125 3600 3580 280M 136 8.3 95 0.9 249 2.9 3.4 1 77 125 1800 1790 280M 144 8.2 95 0.86 497 3 3.4 1.7 71 125 1200 1191 315M 148 7.9 95 0.84 747 3 3.1 3.2 66 150 3600 3580 280M 164 8.5 95 0.9 299 3.1 3.6 1.16 77 150 3600 3585 315S 164 7.5 94.5 0.91 298 2.6 3.1 1.4 81 150 1800 1788 280M 172 8.4 95 0.86 598 3.1 3.5 1.88 71 150 1800 1791 315S 170 7.8 95 0.87 596 3.1 3.2 2.3 75 150 1200 1192 315L 176 8.5 95 0.84 896 3.3 3.3 4 66 175 3600 3586 315M 190 8.3 95 0.91 348 3 3.3 1.6 81 175 1800 1791 315M 198 8.4 95.4 0.87 696 3.2 3.3 2.9 75 175 1200 1192 315L 205 8.9 95 0.84 1046 3.6 3.6 4.7 66 200 3600 3588 315L 215 8.4 95.4 0.91 397 3 3.5 2.1 81 200 1800 1792 315L 225 9 95.4 0.87 795 3.7 3.6 3.5 75 200 1200 1192 315L 235 9.4 95.4 0.84 1195 4 4 5.4 69 250 3600 3588 315L 265 8.6 95.4 0.93 496 3.2 3.4 2.5 81 250 1800 1792 315L 280 9.1 95.8 0.87 994 4 3.7 4.2 75 300 3600 3591 315L 320 10 95.4 0.92 595 4.1 3.9 2.74 83 300 1800 1792 315L 335 9.3 95.8 0.87 1193 4 3.7 4.5 81 Prices and specifications are subject to change without notice 10-27 Introduction General Purpose Duty Duty Purpose Dimensions

Introduction General Purpose Duty Duty Purpose Dimensions IEC - TEFC 1MJ6 ATEX - Ex de IIC T4 kw RPM 50Hz 50Hz 60Hz Synch. F.L. 400 Volts, 50Hz - 40 C Ambient Frame Current [A] 50Hz Full Load Locked Rotor Nominal Efficiency 50Hz Power Factor 50Hz 4/4 4/4 Full Load Torque [Nm] 50Hz Locked Rotor Break Down J [ Kg m 2 ] Explosion Proof Lpf [ db(a) ] Terminal Box Material 0.25 0.29 1500 1325 71M 0.78 3.2 60.0 0.77 1.0 1.8 1.8 0.001 44 Alum. 0.25 0.29 1000 870 71M 0.82 3.1 63.0 0.70 2.0 2.2 2.2 0.001 39 Alum. 0.37 0.43 3000 2750 71M 0.98 4.3 67.0 0.81 1.0 2.3 2.3 0.000 52 Alum. 0.37 0.43 1500 1375 71M 1.13 3.6 64.0 0.74 2.0 2.0 2.0 0.001 44 Alum. 0.37 0.43 1000 910 80M 1.18 3.3 64.0 0.71 3.0 1.9 2.0 0.002 40 Alum. 0.37 0.43 750 655 90L 1.16 2.8 61.0 0.76 5.0 1.4 1.7 0.003 41 Alum. 0.55 0.63 3000 2790 71M 1.38 5.3 71.0 0.81 1.0 2.3 2.3 0.000 52 Alum. 0.55 0.63 1500 1395 80M 1.42 4.7 71.0 0.79 3.0 2.3 2.4 0.002 47 Alum. 0.55 0.63 1000 900 80M 1.67 3.5 64.0 0.74 5.0 2.0 2.1 0.002 40 Alum. 0.55 0.63 750 655 90L 1.62 2.9 65.0 0.76 7.0 1.5 1.7 0.004 41 Alum. 0.75 0.86 3000 2840 80M 1.75 6.3 72.0 0.86 2.0 2.4 2.3 0.001 56 Alum. 0.75 0.86 1500 1395 80M 1.88 5.0 73.0 0.79 5.0 2.5 2.6 0.002 47 Alum. 0.75 0.86 1000 910 90L 2.10 3.9 69.0 0.76 8.0 2.2 2.3 0.003 43 Alum. 0.75 0.86 750 685 100L 2.30 3.5 65.0 0.72 10.0 1.6 1.8 0.005 45 Alum. 1.1 1.3 3000 2835 80M 2.45 6.3 74.0 0.87 3.0 2.6 2.3 0.001 56 Alum. 1.1 1.3 1500 1410 90L 2.70 4.9 73.0 0.80 7.0 2.1 2.5 0.003 48 Alum. 1.1 1.3 1000 905 90L 2.95 4.3 72.0 0.75 12.0 2.4 2.4 0.004 43 Alum. 1.1 1.3 750 685 100L 2.90 3.9 74.0 0.74 16.0 1.8 2.0 0.007 45 Alum. 1.5 1.75 3000 2850 90L 3.30 6.7 78.0 0.84 5.0 2.5 2.5 0.002 60 Alum. 1.5 1.75 1500 1420 90L 3.50 5.8 77.0 0.80 10.0 2.2 2.6 0.004 48 Alum. 1.5 1.75 1000 930 100L 4.00 4.5 75.0 0.73 15.0 2.3 2.5 0.006 47 Alum. 1.5 1.75 750 700 112M 4.00 4.4 74.0 0.73 21.0 1.8 2.0 0.01 49 Alum. 2.2 2.55 3000 2860 90L 4.60 7.1 80.0 0.86 7.0 2.8 2.8 0.002 60 Alum. 2.2 2.55 1500 1420 100L 5.10 6.0 78.0 0.80 15.0 2.2 2.6 0.005 53 Alum. 2.2 2.55 1000 945 112M 5.50 4.8 76.0 0.76 22.0 2.2 2.5 0.01 52 Alum. 2.2 2.55 750 695 132S 6.00 4.2 74.0 0.72 30.0 1.7 2.1 0.01 53 Alum. 3 3.45 3000 2885 100L 6.20 7.7 82.0 0.85 9.0 2.8 3.0 0.004 62 Alum. 3 3.45 1500 1415 100L 6.60 6.4 80.0 0.82 20.0 2.7 3.0 0.006 53 Alum. 3 3.45 1000 945 132S 7.40 4.8 78.0 0.75 30.0 2.0 2.2 0.01 63 Alum. 3 3.45 750 700 132M 7.90 4.4 76.0 0.72 40.0 1.9 2.2 0.01 53 Alum. 4 4.6 3000 2895 112M 7.80 7.6 84.0 0.88 13.0 2.4 2.8 0.006 63 Alum. 4 4.6 1500 1435 112M 8.00 7.2 83.0 0.82 27.0 2.8 3.0 0.01 53 Alum. 4 4.6 1000 945 132M 9.60 5.0 79.0 0.76 40.0 2.0 2.4 0.01 63 Alum. 4 4.6 750 715 160M 9.90 4.8 81.0 0.72 54.0 2.1 2.3 0.03 63 Alum. 5.5 6.3 3000 2925 132S 10.50 5.9 85.0 0.89 18.0 2.0 2.6 0.01 68 Alum. 5.5 6.3 1500 1450 132S 11.10 6.9 86.0 0.83 36.0 2.4 3.3 0.01 62 Alum. 5.5 6.3 1000 950 132M 12.60 5.4 83.0 0.76 55.0 2.2 2.5 0.02 63 Alum. 5.5 6.3 750 710 160M 13.30 5.1 83.0 0.72 74.0 2.3 2.5 0.04 63 Alum. 7.5 8.6 3000 2930 132S 14.50 6.9 87.0 0.89 24.0 2.3 2.6 0.01 68 Alum. 7.5 8.6 1500 1450 132M 15.00 7.7 86.0 0.84 49.0 2.7 3.3 0.02 62 Alum. 7.5 8.6 1000 960 160M 17.50 5.1 86.0 0.72 75.0 2.1 2.5 0.04 66 Alum. 7.5 8.6 750 715 160L 17.90 5.8 84.0 0.72 100.0 2.6 2.8 0.06 63 C.I. Prices and specifications are subject to change without notice 10-28 2009-2010 Low Voltage AC Selection and Pricing Guide

IEC - TEFC 1MJ6 ATEX - Ex de IIC T4 kw RPM 50Hz 50Hz 60Hz Synch. F.L. 400 Volts, 50Hz - 40 C Ambient Frame Current [A] 50Hz Full Load Locked Rotor Nominal Efficiency 50Hz Power Factor 50Hz 4/4 4/4 Full Load Torque [Nm] 50Hz Locked Rotor Break Down J [ Kg m 2 ] Explosion Proof Lpf [ db(a) ] Terminal Box Material 11 12.6 3000 2940 160M 20.50 6.5 88.0 0.88 36.0 2.1 2.6 0.03 70 Alum. 11 12.6 1500 1455 160M 21.50 6.6 87.0 0.85 72.0 2.4 2.9 0.04 66 Alum. 11 12.6 1000 960 160L 24.50 5.5 87.0 0.74 109.0 2.3 2.5 0.04 66 C.I. 11 13.2 750 725 180L 26.00 5.0 87.0 0.70 145.0 2.0 2.2 0.21 60 Alum. 15 17.3 3000 2940 160M 26.50 6.6 89.0 0.91 49.0 2.2 3.1 0.04 70 Alum. 15 17.3 1500 1455 160L 28.50 7.4 89.0 0.85 98.0 2.8 3.2 0.05 66 C.I. 15 18.0 1000 970 180L 29.50 6.3 89.0 0.83 148.0 2.6 2.4 0.2 66 Alum. 15 18.0 750 725 200L 32.00 5.0 87.5 0.78 198.0 2.1 2.2 0.37 58 Alum. 18.5 21.3 3000 2940 160L 32.50 7.0 91.0 0.91 60.0 2.4 3.3 0.05 70 C.I. 18.5 21.3 1500 1460 180M 35.00 7.1 90.5 0.84 121.0 2.3 3.0 0.13 63 Alum. 18.5 22.0 1000 975 200L 36.00 6.3 90.2 0.82 181.0 2.6 2.3 0.29 66 Alum. 22 24.5 3000 2940 180M 39.00 6.9 92.0 0.88 71.0 2.5 3.2 0.07 70 Alum. 22 25.3 1500 1460 180L 41.00 7.1 91.2 0.85 144.0 2.3 3.0 0.15 63 Alum. 22 26.5 1000 975 200L 42.50 5.7 90.8 0.83 215.0 2.5 2.3 0.33 66 Alum. 30 33.5 3000 2940 200L 53.00 6.5 92.3 0.89 97.0 2.4 2.8 0.14 71 Alum. 30 34.5 1500 1465 200L 55.00 7.4 91.8 0.86 196.0 2.6 3.2 0.24 65 Alum. 37 41.5 3000 2945 200L 64.00 7.7 92.8 0.90 120.0 2.4 2.8 0.16 71 Alum. Prices and specifications are subject to change without notice Introduction General Purpose Duty Duty Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 10-29 Dimensions

Introduction General Purpose Duty Duty IEC - TEFC 1MJ7 ATEX - Ex de IIC T4 kw RPM 50Hz 50Hz 60Hz Synch. F.L. 400 Volts, 50Hz - 40 C Ambient Frame Current [A] 50Hz Full Load Locked Rotor Nominal Efficiency 50Hz Power Factor 50Hz 4/4 4/4 Full Load Torque [Nm] 50Hz Locked Rotor Break Down J [ Kg m 2 ] Explosion Proof Lpf [ db(a) ] 18.5 22 750 725 225S 37.5 5.0 88.6 0.80 244 2.1 2.2 0.58 58 C.I. Terminal Box Material 22 26.5 750 725 225M 43.5 5.0 90.1 0.81 290 2.1 2.2 0.66 58 C.I. 30 36 900 978 225M 56 5.7 92.0 0.84 293 2.6 2.2 0.57 66 C.I. 30 36 750 730 250M 58 5.0 91.6 0.81 392 2.1 2.1 1.1 57 C.I. 37 42.5 1500 1475 225S 67 7.0 93.0 0.86 240 2.5 3.1 0.44 65 C.I. 37 44.5 900 980 250M 69 6.0 92.4 0.84 361 2.6 2.1 0.89 60 C.I. 37 44.5 750 732 280S 70 5.5 92.7 0.82 483 2.2 2.2 1.4 58 C.I. 45 51 3000 2955 225M 77 6.9 93.9 0.90 145 2.3 2.7 0.24 71 C.I. 45 52 1500 1475 225M 80 7.0 93.4 0.87 292 2.6 3.2 0.52 65 C.I. 45 54 900 982 280S 81 6.0 93.0 0.86 438 2.4 2.3 1.3 60 C.I. 45 54 750 734 280M 84 5.5 92.8 0.83 585 2.2 2.2 1.6 58 C.I. 55 62 3000 2965 250M 93 6.9 94.0 0.90 177 2.1 2.8 0.45 75 C.I. 55 63 1500 1480 250M 97 6.7 94.0 0.87 355 2.6 2.5 0.79 65 C.I. 55 66 900 984 280M 99 6.2 93.6 0.86 534 2.5 2.4 1.5 60 C.I. 55 66 750 738 315S 104 6.0 93.1 0.82 712 2.2 2.4 2.3 62 C.I. 75 84 3000 2975 280S 128 7.0 94.7 0.90 241 1.9 2.7 0.79 77 C.I. 75 86 1500 1485 280S 132 6.7 94.7 0.86 482 2.5 2.7 1.4 67 C.I. 75 90 900 988 315S 136 6.2 93.8 0.85 725 2.4 2.5 2.4 63 C.I. 75 90 750 738 315M 140 6.2 93.6 0.82 970 2.3 2.5 3 62 C.I. 90 101 3000 2975 280M 150 7.0 95.1 0.91 289 2.0 2.7 0.92 77 C.I. 90 104 1500 1485 280M 160 6.8 95.0 0.86 579 2.5 2.8 1.6 67 C.I. 90 108 900 988 315M 162 6.2 94.2 0.85 870 2.4 2.5 2.9 63 C.I. 110 123 3000 2980 315S 186 7.0 94.8 0.90 353 1.8 2.8 1.3 79 C.I. 110 127 1500 1486 315S 194 6.7 94.8 0.86 707 2.5 2.7 2.2 69 C.I. 132 148 3000 2980 315M 225 7.0 95.1 0.90 423 1.9 2.8 1.5 79 C.I. 132 152 1500 1486 315M 232 7.2 95.5 0.86 848 2.7 3.0 2.7 69 C.I. Prices and specifications are subject to change without notice Dimensions Purpose 10-30 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose GP10A / GP100A - Foot Mounted - Aluminum 143-250 Introduction General Purpose Duty Duty Frame Poles C 2F N-W P U BA AB 2E D O Keyseat R S ES 143T All 14.37 4 2.25 7.6 0.875 2.25 7 5.5 4 7.28 0.771 0.188 1.41 145T All 14.37 5 2.25 7.6 0.875 2.25 7 5.5 4 7.28 0.771 0.188 1.41 182T (1) All 15.69 4.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 182T (2) All 16.68 4.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 184T (1) All 15.69 5.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 184T (2) All 16.68 5.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 213T (3) All 18.68 5.5 3.38 10.3 1.375 3.5 8.27 8.5 5 10.41 1.201 0.312 2.44 213T (4) All 20.65 5.5 3.38 10.3 1.375 3.5 8.27 8.5 5 10.41 1.201 0.312 2.44 215T (3) All 18.68 7 3.38 10.3 1.375 3.5 8.27 9 5 10.41 1.201 0.312 2.44 215T (4) All 20.65 7 3.38 10.3 1.375 3.5 8.27 9 5 10.41 1.201 0.312 2.44 254T (5) All 23.8 8.25 4 12.4 1.625 4.25 9.35 10 6 12.43 1.416 0.375 2.91 254T (6) All 26.16 8.25 4 12.4 1.625 4.25 9.35 10 6 12.43 1.416 0.375 2.91 256T (5) All 23.8 10 4 12.4 1.625 4.25 9.35 10 6.25 12.43 1.416 0.375 2.91 256T (6) All 26.16 10 4 12.4 1.625 4.25 9.35 10 6.25 12.43 1.416 0.375 2.91 * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. (1) All GP10A except 5HP, 1800RPM & 1.5HP, 900RPM. (2) All GP100A and 5HP, 1800RPM & 1.5HP, 900RPM GP10A. (3) All GP10A except 10HP, 3600RPM & 10HP, 1800RPM. (4) All GP100A and 10HP, 3600RPM & 10HP, 1800RPM GP10A. (5) All GP10A. (6) All GP100A. * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. (1) Not according to NEMA standard All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 11-1 Dimensions

Introduction General Purpose General Purpose GP10A / GP100A - C-Face Foot Mounted, Footless - Aluminum Frames 140-250 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U BA AB 2E D O 11-2 2009-2010 Low Voltage AC Selection and Pricing Guide Keyseat C-Face R S ES AH AJ AK BD BF # BF 143T All 14.37 4 2.25 7.6 0.875 2.25 7 5.5 4 7.28 0.771 0.188 1.41 2.12 6 4.5 6.60 4 3/8-16 145T All 14.37 5 2.25 7.6 0.875 2.25 7 5.5 4 7.28 0.771 0.188 1.41 2.12 6 4.5 6.60 4 3/8-16 182T (1) All 15.69 4.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 2.62 7 8.5 * 8.90 4 1/2-13 182T (2) All 16.68 4.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 2.62 7 8.5 * 8.90 4 1/2-13 184T (1) All 15.69 5.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 2.62 7 8.5 * 8.90 4 1/2-13 184T (2) All 16.68 5.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 2.62 7 8.5 * 8.90 4 1/2-13 213T (3) All 18.68 5.5 3.38 10.3 1.375 3.5 8.27 8.5 5 10.41 1.201 0.312 2.44 3.12 7 8.5 8.90 4 1/2-13 213T (4) All 20.65 5.5 3.38 10.3 1.375 3.5 8.27 8.5 5 10.41 1.201 0.312 2.44 3.12 7 8.5 8.90 4 1/2-13 215T (3) All 18.68 7 3.38 10.3 1.375 3.5 8.27 9 5 10.41 1.201 0.312 2.44 3.12 7 8.5 8.90 4 1/2-13 215T (4) All 20.65 7 3.38 10.3 1.375 3.5 8.27 9 5 10.41 1.201 0.312 2.44 3.12 7 8.5 8.90 4 1/2-13 254T (5) All 23.8 8.25 4 12.4 1.625 4.25 9.35 10 6 12.43 1.416 0.375 2.91 3.75 7 8.5 9.30 4 1/2-13 254T (6) All 26.16 8.25 4 12.4 1.625 4.25 9.35 10 6 12.43 1.416 0.375 2.91 3.75 7 8.5 9.30 4 1/2-13 256T (5) All 23.8 10 4 12.4 1.625 4.25 9.35 10 6.25 12.43 1.416 0.375 2.91 3.75 7 8.5 9.30 4 1/2-13 256T (6) All 26.16 10 4 12.4 1.625 4.25 9.35 10 6.25 12.43 1.416 0.375 2.91 3.75 7 8.5 9.30 4 1/2-13 * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. (1) All GP10A except 5HP, 1800RPM & 1.5HP, 900RPM. (2) All GP100A and 5HP, 1800RPM & 1.5HP, 900RPM GP10A. (3) All GP10A except 10HP, 3600RPM & 10HP, 1800RPM. (4) All GP100A and 10HP, 3600RPM & 10HP, 1800RPM GP10A. (5) All GP10A. (6) All GP100A. * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet.

General Purpose GP10A / GP100A - D Flange Foot Mounted, Footless - Aluminum Frames 140-250 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U BA AB 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 143T All 14.37 4 2.25 7.6 0.875 2.25 7 5.5 4 7.28 0.771 0.188 1.41 2.25 10 9.0 10.90 4 0.53 145T All 14.37 5 2.25 7.6 0.875 2.25 7 5.5 4 7.28 0.771 0.188 1.41 2.25 10 9.0 10.90 4 0.53 182T (1) All 15.69 4.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 2.75 10 9.0 11.00 4 0.53 182T (2) All 16.68 4.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 2.75 10 9.0 11.00 4 0.53 184T (1) All 15.69 5.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 2.75 10 9.0 11.00 4 0.53 184T (2) All 16.68 5.5 2.75 8.7 1.125 2.75 6.94 7.5 5 8.87 0.986 0.25 1.81 2.75 10 9.0 11.00 4 0.53 213T (3) All 18.68 5.5 3.38 10.3 1.375 3.5 8.27 8.5 5 10.41 1.201 0.312 2.44 3.38 10 9.0 10.90 4 0.53 213T (4) All 20.65 5.5 3.38 10.3 1.375 3.5 8.27 8.5 5 10.41 1.201 0.312 2.44 3.38 10 9.0 10.90 4 0.53 215T (3) All 18.68 7 3.38 10.3 1.375 3.5 8.27 9 5 10.41 1.201 0.312 2.44 3.38 10 9.0 10.90 4 0.53 215T (4) All 20.65 7 3.38 10.3 1.375 3.5 8.27 9 5 10.41 1.201 0.312 2.44 3.38 10 9.0 10.90 4 0.53 254T (5) All 23.8 8.25 4 12.4 1.625 4.25 9.35 10 6 12.43 1.416 0.375 2.91 4.00 13 11.0 13.90 4 0.81 254T (6) All 26.16 8.25 4 12.4 1.625 4.25 9.35 10 6 12.43 1.416 0.375 2.91 4.00 13 11.0 13.90 4 0.81 256T (5) All 23.8 10 4 12.4 1.625 4.25 9.35 10 6.25 12.43 1.416 0.375 2.91 4.00 13 11.0 13.90 4 0.81 256T (6) All 26.16 10 4 12.4 1.625 4.25 9.35 10 6.25 12.43 1.416 0.375 2.91 4.00 13 11.0 13.90 4 0.81 * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. (1) All GP10A except 5HP, 1800RPM & 1.5HP, 900RPM. (2) All GP100A and 5HP, 1800RPM & 1.5HP, 900RPM GP10A. (3) All GP10A except 10HP, 3600RPM & 10HP, 1800RPM. (4) All GP100A and 10HP, 3600RPM & 10HP, 1800RPM GP10A. (5) All GP10A. (6) All GP100A. * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-3 Dimensions

Introduction General Purpose General Purpose GP10 - Foot Mounted - Frames 143-320 Purpose Frame Poles C 2F N-W (1) P U BA AB 2E D O Keyseat R S ES 143T All 13.44 4 2.25 7.6 0.875 2.25 6.9 5.5 4 7.5 0.771 0.188 1.41 145T All 14.4 5 2.25 7.6 0.875 2.25 6.9 5.5 4 7.5 0.771 0.188 1.41 182T All 15.74 4.5 2.75 9.6 1.125 2.75 7.8 7.5 5 11.1 0.986 0.25 1.81 184T All 16.7 5.5 2.75 9.6 1.125 2.75 7.8 7.5 5 11.1 0.986 0.25 1.81 213T All 19.17 5.5 3.38 10.7 1.375 3.5 9.45 8.5 5 10.66 1.201 0.312 2.44 215T All 20.7 7 3.38 10.7 1.375 3.5 9.45 8.5 5 10.66 1.201 0.312 2.44 254T All 24.41 8.25 4 12.9 1.625 4.25 10.197 10.0 6 12.75 1.416 0.375 2.91 256T All 26.16 10 4 12.9 1.625 4.25 10.197 10.0 6 12.75 1.416 0.375 2.91 284T All 27.4 9.5 4.63 15.5 1.875 13.4 4.75 6 7 14.19 0.5 1.59 3.25 286T All 28.9 11 4.63 15.5 1.875 13.4 4.75 6 7 14.19 0.5 1.59 3.25 284TS All 26 9.5 3.25 15.5 1.625 13.4 4.75 6 7 14.19 0.375 1.42 1.88 286TS All 27.5 11 3.25 15.5 1.625 13.4 4.75 6 7 14.19 0.375 1.42 1.88 324T All 32 10.5 5.25 17.1 2.125 15.75 5.25 6 8 15.94 0.5 1.85 3.88 326T All 32 12 5.25 17.1 2.125 15.75 5.25 6 8 15.94 0.5 1.85 3.88 324TS All 30 10.5 3.75 17.1 1.875 15.75 5.25 6 8 15.94 0.5 1.59 2 326TS All 30 12 3.75 17.1 1.875 15.75 5.25 6 8 15.94 0.5 1.59 2 * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. (1) Not according to NEMA standard. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. Dimensions Duty Duty 11-4 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose GP10 - Foot Mounted - Frames 360-440 Introduction General Purpose Duty Duty Frame Poles C 2F N-W (1) P U AB AB 2E D O Keyseat R S ES 364T All 34.2 11 5.88 18.5 2.375 17.69 5.88 7 9 17.81 0.625 2.02 4.25 365T All 34.2 12 5.88 18.5 2.375 17.69 5.88 7 9 17.81 0.625 2.02 4.25 364TS All 32.1 11.25 3.75 18.5 1.875 17.69 5.88 7 9 17.81 0.500 1.59 2 365TS All 32.1 12.25 3.75 18.5 1.875 17.69 5.88 7 9 17.81 0.500 1.59 2 404T All 39.5 12.25 7.25 19.6 2.875 17.5 6.625 8 10 19.9 0.75 2.45 5.63 405T All 39.5 13.75 7.25 19.6 2.875 17.5 6.625 8 10 19.9 0.75 2.45 5.63 404TS All 36.5 12.25 4.25 19.6 2.125 17.5 6.625 8.0 10 19.9 0.5 1.85 2.75 405TS All 36.5 13.75 4.25 19.6 2.125 17.5 6.625 8.0 10 19.9 0.5 1.85 2.75 444T All 45.6 14.5 8.5 21.7 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 445T All 45.6 16.5 8.5 21.7 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 444TS All 41.8 14.5 4.75 21.7 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 445TS All 41.8 16.5 4.75 21.7 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 447T All 49.1 20 8.5 21.8 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 447TS All 45.4 20 4.75 21.8 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 449T All 54.1 25 8.5 21.8 3.375 22 7.5 9 11 21.9 0.875 2.88 6.88 449TS All 50.3 25 4.75 21.8 2.375 22 7.5 9 11 21.9 0.625 2.02 3 * Only for 400HP, 2 Pole (1) Not according to NEMA standard. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 11-5 Dimensions

Introduction General Purpose General Purpose GP10 - C-Face Foot Mounted, Footless - Frames 140-320 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U BA AB 2E D O Keyseat C-Face R S ES AH AJ AK BD BF # BF 143T All 13.44 4 2.25 7.6 0.875 2.25 6.9 5.5 4 7.5 0.771 0.188 1.41 2.12 6 4.5 6.60 4 3/8-16 145T All 14.4 5 2.25 7.6 0.875 2.25 6.9 5.5 4 7.5 0.771 0.188 1.41 2.12 6 4.5 6.60 4 3/8-16 182T All 15.74 4.5 2.75 9.6 1.125 2.75 7.8 7.5 5 11.1 0.986 0.25 1.81 2.62 7 8.5 * 8.90 4 1/2-13 184T All 16.7 5.5 2.75 9.6 1.125 2.75 7.8 7.5 5 11.1 0.986 0.25 1.81 2.62 7 8.5 * 8.90 4 1/2-13 213T All 19.17 5.5 3.38 10.7 1.375 3.5 9.45 8.5 5 10.66 1.201 0.31 2.44 3.12 7 8.5 8.90 4 1/2-13 215T All 20.7 7 3.38 10.7 1.375 3.5 9.45 8.5 5 10.66 1.201 0.31 2.44 3.12 7 8.5 8.90 4 1/2-13 254T All 24.41 8.25 4 12.9 1.625 4.25 10.197 10 6 12.75 1.416 0.375 2.91 3.75 7 8.5 9.30 4 1/2-13 256T All 26.16 10 4 12.9 1.625 4.25 10.197 10 6 12.75 1.416 0.375 2.91 3.75 7 8.5 9.30 4 1/2-13 284T All 27.4 9.5 4.63 15.5 1.875 13.4 4.75 5.5 7 14.19 0.5 1.59 3.25 4.38 9 10.5 10.75 4 1/2"-13NC 286T All 28.9 11 4.63 15.5 1.875 13.4 4.75 6 7 14.19 0.5 1.59 3.25 4.38 9 10.5 10.75 4 1/2"-13NC 284TS All 26 9.5 3.25 15.5 1.625 13.4 4.75 6 7 14.19 0.375 1.42 1.88 3.00 9 10.5 10.75 4 1/2"-13NC 286TS All 27.5 11 3.25 15.5 1.625 13.4 4.75 6 7 14.19 0.375 1.42 1.88 3.00 9 10.5 10.75 4 1/2"-13NC 324T All 32 10.5 5.25 17.1 2.125 15.75 5.25 6 8 15.94 0.5 1.85 3.88 5.00 11 12.5 12.75 4 5/8"-11NC 326T All 32 12 5.25 17.1 2.125 15.75 5.25 6 8 15.94 0.5 1.85 3.88 5.00 11 12.5 12.75 4 5/8"-11NC 324TS All 30 10.5 3.75 17.1 1.875 15.75 5.25 6 8 15.94 0.5 1.59 2 3.50 11 12.5 12.75 4 5/8"-11NC 326TS All 30 12 3.75 17.1 1.875 15.75 5.25 6 8 15.94 0.5 1.59 2 3.50 11 12.5 12.75 4 5/8"-11NC (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet. 11-6 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose GP10 - C-Face Foot Mounted, Footless - Frames 360-440 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U BA AB 2E D O Keyseat C-Face R S ES AH AJ AK BD BF # BF 364T All 34.2 11 5.88 18.5 2.375 17.69 5.88 7 9 17.81 0.625 2.02 4.25 5.62 11 13 12.75 8 5/8"-11NC 365T All 34.2 12 5.88 18.5 2.375 17.69 5.88 7 9 17.81 0.625 2.02 4.25 5.62 11 13 12.75 8 5/8"-11NC 364TS All 32.1 11.25 3.75 18.5 1.875 17.69 5.88 7 9 17.81 0.500 1.59 2 3.50 11 13 12.75 8 5/8"-11NC 365TS All 32.1 12.25 3.75 18.5 1.875 17.69 5.88 7 9 17.81 0.500 1.59 2 3.50 11 13 12.75 8 5/8"-11NC 404T All 39.5 12.25 7.25 19.6 2.875 17.5 6.625 8 10 19.9 0.75 2.45 5.63 7.00 11 13 12.75 8 5/8"-11NC 405T All 39.5 13.75 7.25 19.6 2.875 17.5 6.625 8 10 19.9 0.75 2.45 5.63 7.00 11 13 12.75 8 5/8"-11NC 404TS All 36.5 12.25 4.25 19.6 2.125 17.5 6.625 8.0 10 19.9 0.5 1.85 2.75 4.00 11 13 12.75 8 5/8"-11NC 405TS All 36.5 13.75 4.25 19.6 2.125 17.5 6.625 8.0 10 19.9 0.5 1.85 2.75 4.00 11 13 12.75 8 5/8"-11NC 444T All 45.6 14.5 8.5 21.7 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 8.25 14 16 16.62 8 5/8"-11NC 445T All 45.6 16.5 8.5 21.7 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 8.25 14 16 16.62 8 5/8"-11NC 444TS All 41.8 14.5 4.75 21.7 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 4.50 14 16 16.62 8 5/8"-11NC 445TS All 41.8 16.5 4.75 21.7 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 4.50 14 16 16.62 8 5/8"-11NC 447T All 49.1 20 8.5 21.8 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 8.25 14 16 16.62 8 5/8"-11NC 447TS All 45.4 20 4.75 21.8 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 4.50 14 16 16.62 8 5/8"-11NC 449T All 54.1 25 8.5 21.8 3.375 22 7.5 9 11 21.9 0.875 2.88 6.88 8.25 14 16 16.62 8 5/8"-11NC 449TS All 50.3 25 4.75 21.8 2.375 22 7.5 9 11 21.9 0.625 2.02 3 4.50 14 16 16.62 8 5/8"-11NC (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-7 Dimensions

Introduction General Purpose General Purpose GP10 - D Flange Foot Mounted, Footless - Frames 140-320 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U BA AB 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 143T All 13.44 4 2.25 7.6 0.875 2.25 6.9 5.5 4 7.5 0.771 0.188 1.41 2.25 10 9.0 10.90 4 0.53 145T All 14.4 5 2.25 7.6 0.875 2.25 6.9 5.5 4 7.5 0.771 0.188 1.41 2.25 10 9.0 10.90 4 0.53 182T All 15.74 4.5 2.75 9.6 1.125 2.75 7.8 7.5 5 11.1 0.986 0.25 1.81 2.75 10 9.0 11.00 4 0.53 184T All 16.7 5.5 2.75 9.6 1.125 2.75 7.8 7.5 5 11.1 0.986 0.25 1.81 2.75 10 9.0 11.00 4 0.53 213T All 19.17 5.5 3.38 10.7 1.375 3.5 9.45 8.5 5 10.66 1.201 0.312 2.44 3.38 10 9.0 10.90 4 0.53 215T All 20.7 7 3.38 10.7 1.375 3.5 9.45 8.5 5 10.66 1.201 0.312 2.44 3.38 10 9.0 10.90 4 0.53 254T All 24.41 8.25 4 12.9 1.625 4.25 10.197 10.0 6 12.75 1.416 0.375 2.91 4.00 13 11.0 13.90 4 0.81 256T All 26.16 10 4 12.9 1.625 4.25 10.197 10.0 6 12.75 1.416 0.375 2.91 4.00 13 11.0 13.90 4 0.81 284T All 27.4 9.5 4.63 15.5 1.875 13.4 4.75 6 7 14.19 0.5 1.59 3.25 4.62 13 11.0 13.88 4 0.812 286T All 28.9 11 4.63 15.5 1.875 13.4 4.75 6 7 14.19 0.5 1.59 3.25 4.62 13 11.0 13.88 4 0.812 284TS All 26 9.5 3.25 15.5 1.625 13.4 4.75 6 7 14.19 0.375 1.42 1.88 3.25 13 11.0 13.88 4 0.812 286TS All 27.5 11 3.25 15.5 1.625 13.4 4.75 6 7 14.19 0.375 1.42 1.88 3.25 13 11.0 13.88 4 0.812 324T All 32 10.5 5.25 17.1 2.125 15.75 5.25 6 8 15.94 0.5 1.85 3.88 5.25 16 14.0 17.88 4 0.812 326T All 32 12 5.25 17.1 2.125 15.75 5.25 6 8 15.94 0.5 1.85 3.88 5.25 16 14.0 17.88 4 0.812 324TS All 30 10.5 3.75 17.1 1.875 15.75 5.25 6 8 15.94 0.5 1.59 2 3.75 16 14.0 17.88 4 0.812 326TS All 30 12 3.75 17.1 1.875 15.75 5.25 6 8 15.94 0.5 1.59 2 3.75 16 14 17.88 4 0.812 (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet. 11-8 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose GP10 - D Flange Foot Mounted, Footless - Frames 360-440 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U BA AB 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 364T All 34.2 11 5.88 18.5 2.375 17.69 5.88 7 9 17.81 0.625 2.02 4.25 5.88 16 14 17.88 4 0.81 365T All 34.2 12 5.88 18.5 2.375 17.69 5.88 7 9 17.81 0.625 2.02 4.25 5.88 16 14 17.88 4 0.81 364TS All 32.1 11.25 3.75 18.5 1.875 17.69 5.88 7 9 17.81 0.500 1.59 2 3.75 16 14 17.88 4 0.81 365TS All 32.1 12.25 3.75 18.5 1.875 17.69 5.88 7 9 17.81 0.500 1.59 2 3.75 16 14 17.88 4 0.81 404T All 39.5 12.25 7.25 19.6 2.875 17.5 6.625 8 10 19.9 0.75 2.45 5.63 7.25 20 18 21.88 8 0.81 405T All 39.5 13.75 7.25 19.6 2.875 17.5 6.625 8 10 19.9 0.75 2.45 5.63 7.25 20 18 21.88 8 0.81 404TS All 36.5 12.25 4.25 19.6 2.125 17.5 6.625 8.0 10 19.9 0.5 1.85 2.75 4.25 20 18 21.88 8 0.81 405TS All 36.5 13.75 4.25 19.6 2.125 17.5 6.625 8.0 10 19.9 0.5 1.85 2.75 4.25 20 18 21.88 8 0.81 444T All 45.6 14.5 8.5 21.7 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 8.50 20 18 21.88 8 0.81 445T All 45.6 16.5 8.5 21.7 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 8.50 20 18 21.88 8 0.81 444TS All 41.8 14.5 4.75 21.7 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 4.75 20 18 21.88 8 0.81 445TS All 41.8 16.5 4.75 21.7 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 4.75 20 18 21.88 8 0.81 447T All 49.1 20 8.5 21.8 3.375 19.94 7.5 9 11 21.9 0.875 2.88 6.88 8.50 20 18 21.88 8 0.81 447TS All 45.4 20 4.75 21.8 2.375 19.94 7.5 9 11 21.9 0.625 2.02 3 4.75 20 18 21.88 8 0.81 449T All 54.1 25 8.5 21.8 3.375 22 7.5 9 11 21.9 0.875 2.88 6.88 8.50 20 18 21.88 8 0.81 449TS All 50.3 25 4.75 21.8 2.375 22 7.5 9 11 21.9 0.625 2.02 3 4.75 20 18 21.88 8 0.81 (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-9 Dimensions

Introduction General Purpose General Purpose GP100 Foot Mounted + C-Face + D Flange - Frames 140-250 Purpose Duty Duty Dimensions Frame C 2F N-W P U BA AB 2E D O Keyseat C-Face with Feet D Flange with Feet R S ES AH AJ AK BD BF AH AJ AK BD BF 143T 14.4 4 2.25 7.6 0.875 2.25 6.9 5.5 3.5 7.5 0.771 0.188 1.41 2.12 5.88 4.50 6.60 3/8-16 2.25 10 9 10.90 0.53 145T 14.4 5 2.25 7.6 0.875 2.25 6.9 5.5 3.5 7.5 0.771 0.188 1.41 2.12 5.88 4.50 6.60 3/8-16 2.25 10 9 10.90 0.53 182T 16.7 4.5 2.75 9.6 1.125 2.75 7.8 7.5 4.5 11.1 0.986 0.25 1.81 2.62 7.25 8.5* 8.90 1/2-13 2.75 10 9 11.00 0.53 184T 16.7 5.5 2.75 9.6 1.125 2.75 7.8 7.5 4.5 11.1 0.986 0.25 1.81 2.62 7.25 8.5* 8.90 1/2-13 2.75 10 9 11.00 0.53 213T 20.7 5.5 3.38 10.7 1.375 3.5 9.45 8.5 5.25 10.66 1.201 0.312 2.44 3.12 7.25 8.50 8.90 1/2-13 3.38 10 9 10.90 0.53 215T 20.7 7 3.38 10.7 1.375 3.5 9.45 8.5 5.25 10.66 1.201 0.312 2.44 3.12 7.25 8.50 8.90 1/2-13 3.38 10 9 10.90 0.53 254T 26.16 8.25 4 12.91 1.625 4.25 10.197 10 6.25 12.75 1.416 0.375 2.91 3.75 7.25 8.50 9.30 1/2-13 4.00 12.5 11.0 13.90 0.81 256T 26.16 10 4 12.91 1.625 4.25 10.197 10 6.25 12.75 1.416 0.375 2.91 3.75 7.25 8.50 9.30 1/2-13 4.00 12.5 11.0 13.90 0.81 * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. 11-10 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose GP100 Footless C-Face, D Flange - Frames 140-250 Introduction General Purpose Duty Duty Purpose Frame C N-W P U AB O Keyseat C-Face without Feet D Flange without Feet R S ES AH AJ AK BD BF AH AJ AK BD BF 143T 14.4 2.25 7.6 0.875 6.9 7.5 0.771 0.188 1.41 2.12 5.88 4.50 6.60 3/8-16 2.25 10 9 10.90 0.53 145T 14.4 2.25 7.6 0.875 6.9 7.5 0.771 0.188 1.41 2.12 5.88 4.50 6.60 3/8-16 2.25 10 9 10.90 0.53 182T 16.7 2.75 9.6 1.125 7.8 11.1 0.986 0.25 1.81 2.62 7.25 8.5* 8.90 1/2-13 2.75 10 9 11.00 0.53 184T 16.7 2.75 9.6 1.125 7.8 11.1 0.986 0.25 1.81 2.62 7.25 8.5* 8.90 1/2-13 2.75 10 9 11.00 0.53 213T 20.7 3.38 10.7 1.375 9.45 10.66 1.201 0.312 2.44 3.12 7.25 8.50 8.90 1/2-13 3.38 10 9 10.90 0.53 215T 20.7 3.38 10.7 1.375 9.45 10.66 1.201 0.312 2.44 3.12 7.25 8.50 8.90 1/2-13 3.38 10 9 10.90 0.53 254T 26.16 4 12.91 1.625 10.197 12.75 1.416 0.375 2.91 3.75 7.25 8.50 9.30 1/2-13 4.00 12.5 11.0 13.90 0.81 256T 26.16 4 12.91 1.625 10.197 12.75 1.416 0.375 2.91 3.75 7.25 8.50 9.30 1/2-13 4.00 12.5 11.0 13.90 0.81 * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-11 Dimensions

Introduction General Purpose SD10 - Foot Mounted - Frames 143-320 Purpose Frame Poles C 2F N-W (1) P U BA AB 2E D O Keyseat R S ES 143T All 13.17 4 2.25 8.2 0.875 2.25 7.4 11 4 7.5 0.771 0.188 1.41 145T All 14.15 5 2.25 8.2 0.875 2.25 7.4 11 4 7.5 0.771 0.188 1.41 182T All 15.43 4.5 2.75 9.6 1.125 2.75 8.2 15 5 11.1 0.986 0.25 1.81 184T All 16.4 5.5 2.75 9.6 1.125 2.75 8.2 15 5 11.1 0.986 0.25 1.81 213T All 18.7 5.5 3.38 10.7 1.375 3.5 10.39 17 5 10.66 1.201 0.312 2.44 215T All 20.2 7 3.38 10.7 1.375 3.5 10.39 17 5 10.66 1.201 0.312 2.44 254T All 24.02 8.25 4 12.9 1.625 4.25 11.14 20.0 6 12.75 1.416 0.375 2.91 256T All 25.77 10 4 12.9 1.625 4.25 11.14 20.0 6 12.75 1.416 0.375 2.91 284T All 27.4 9.5 4.63 15.5 1.875 13.4 4.75 11 7 14.19 0.5 1.59 3.25 286T All 28.9 11 4.63 15.5 1.875 13.4 4.75 11 7 14.19 0.5 1.59 3.25 284TS All 26 9.5 3.25 15.5 1.625 13.4 4.75 11 7 14.19 0.375 1.42 1.88 286TS All 27.5 11 3.25 15.5 1.625 13.4 4.75 11 7 14.19 0.375 1.42 1.88 324T All 32 10.5 5.25 17.1 2.125 15.75 5.25 13 8 15.94 0.5 1.85 3.88 326T All 32 12 5.25 17.1 2.125 15.75 5.25 13 8 15.94 0.5 1.85 3.88 324TS All 30 10.5 3.75 17.1 1.875 15.75 5.25 13 8 15.94 0.5 1.59 2 326TS All 30 12 3.75 17.1 1.875 15.75 5.25 13 8 15.94 0.5 1.59 2 * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. (1) Not according to NEMA standard. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. Dimensions Duty Duty 11-12 2009-2010 Low Voltage AC Selection and Pricing Guide

SD10 - Foot Mounted - Frames 360 - S440 Introduction General Purpose Duty Duty Frame Poles C 2F N-W (1) P U BA AB 2E D O Keyseat R S ES 364T All 34.2 11 5.88 18.5 2.375 17.69 5.88 14 9 17.81 0.625 2.02 4.25 365T All 34.2 12 5.88 18.5 2.375 17.69 5.88 14 9 17.81 0.625 2.02 4.25 364TS All 32.1 11.25 3.75 18.5 1.875 17.69 5.88 14 9 17.81 0.500 1.59 2 365TS All 32.1 12.25 3.75 18.5 1.875 17.69 5.88 14 9 17.81 0.500 1.59 2 404T All 39.5 12.25 7.25 19.6 2.875 17.5 6.625 16 10 19.9 0.75 2.45 5.63 405T All 39.5 13.75 7.25 19.6 2.875 17.5 6.625 16 10 19.9 0.75 2.45 5.63 404TS All 36.5 12.25 4.25 19.6 2.125 17.5 6.625 16.0 10 19.9 0.5 1.85 2.75 405TS All 36.5 13.75 4.25 19.6 2.125 17.5 6.625 16.0 10 19.9 0.5 1.85 2.75 444T All 45.6 14.5 8.5 21.7 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 445T All 45.6 16.5 8.5 21.7 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 444TS All 41.8 14.5 4.75 21.7 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 445TS All 41.8 16.5 4.75 21.7 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 447T All 49.1 20 8.5 21.8 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 447TS All 45.4 20 4.75 21.8 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 449T All 54.1 25 8.5 21.8 3.375 22 7.5 18 11 21.9 0.875 2.88 6.88 449TS All 50.3 25 4.75 21.8 2.375 22 7.5 18 11 21.9 0.625 2.02 3 S449LS All 67.1 25 9.12 25.4 3.625 23.01 7.5 18 11 23.4 0.875 3.13 7.5 S449SS All 67.1 25 5.25 25.4 2.625 23.01 7.5 18 11 23.4 0.625 2.28 3.5 * Only for 400HP, 2 Pole. (1) Not according to NEMA standard. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 11-13 Dimensions

Introduction General Purpose SD10 - C-Face Foot Mounted, Footless - Frames 140-320 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U BA AB 2E D O Keyseat C-Face R S ES AH AJ AK BD BF # BF 143TC All 13.17 4 2.25 8.2 0.875 2.25 7.4 11 4 7.5 0.771 0.188 1.41 2.12 6 4.5 6.60 3/8-16 145TC All 14.15 5 2.25 8.2 0.875 2.25 7.4 11 4 7.5 0.771 0.188 1.41 2.12 6 4.5 6.60 3/8-16 182TC All 15.43 4.5 2.75 9.6 1.125 2.75 8.2 15 5 11.1 0.986 0.25 1.81 2.62 7 8.5* 8.90 1/2-13 184TC All 16.4 5.5 2.75 9.6 1.125 2.75 8.2 15 5 11.1 0.986 0.25 1.81 2.62 7 8.5* 8.90 1/2-13 213TC All 18.7 5.5 3.38 10.7 1.375 3.5 10.39 17 5 10.66 1.201 0.31 2.44 3.12 7 8.5 8.90 1/2-13 215TC All 20.2 7 3.38 10.7 1.375 3.5 10.39 17 5 10.66 1.201 0.31 2.44 3.12 7 8.5 8.90 1/2-13 254TC All 24.02 8.25 4 12.9 1.625 4.25 11.14 20 6 12.75 1.416 0.375 2.91 3.75 7 8.5 9.30 1/2-13 256TC All 25.77 10 4 12.9 1.625 4.25 11.14 20 6 12.75 1.416 0.375 2.91 3.75 7 8.5 9.30 1/2-13 284TC All 27.4 9.5 4.63 15.5 1.875 13.4 4.75 11.0 7 14.19 0.5 1.59 3.25 4.38 9 10.5 10.75 4 1/2"-13NC 286TC All 28.9 11 4.63 15.5 1.875 13.4 4.75 11.0 7 14.19 0.5 1.59 3.25 4.38 9 10.5 10.75 4 1/2"-13NC 284TSC All 26 9.5 3.25 15.5 1.625 13.4 4.75 11 7 14.19 0.375 1.42 1.88 3.00 9 10.5 10.75 4 1/2"-13NC 286TSC All 27.5 11 3.25 15.5 1.625 13.4 4.75 11 7 14.19 0.375 1.42 1.88 3.00 9 10.5 10.75 4 1/2"-13NC 324TC All 32 10.5 5.25 17.1 2.125 15.75 5.25 13 8 15.94 0.5 1.85 3.88 5.00 11 12.5 12.75 4 5/8"-11NC 326TC All 32 12 5.25 17.1 2.125 15.75 5.25 13 8 15.94 0.5 1.85 3.88 5.00 11 12.5 12.75 4 5/8"-11NC 324TSC All 30 10.5 3.75 17.1 1.875 15.75 5.25 13 8 15.94 0.5 1.59 2 3.50 11 12.5 12.75 4 5/8"-11NC 326TSC All 30 12 3.75 17.1 1.875 15.75 5.25 13 8 15.94 0.5 1.59 2 3.50 11 12.5 12.75 4 5/8"-11NC (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet. 11-14 2009-2010 Low Voltage AC Selection and Pricing Guide

SD10 - C-Face Foot Mounted, Footless - Frames 360-440 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U BA AB 2E D O Keyseat C-Face R S ES AH AJ AK BD BF# BF 364TC All 34.2 11 5.88 18.5 2.375 17.69 5.88 14 9 17.81 0.625 2.02 4.25 5.62 11 13 12.75 8 5/8"-11NC 365TC All 34.2 12 5.88 18.5 2.375 17.69 5.88 14 9 17.81 0.625 2.02 4.25 5.62 11 13 12.75 8 5/8"-11NC 364TSC All 32.1 11.25 3.75 18.5 1.875 17.69 5.88 14 9 17.81 0.500 1.59 2 3.50 11 13 12.75 8 5/8"-11NC 365TSC All 32.1 12.25 3.75 18.5 1.875 17.69 5.88 14 9 17.81 0.500 1.59 2 3.50 11 13 12.75 8 5/8"-11NC 404TC All 39.5 12.25 7.25 19.6 2.875 17.5 6.625 16 10 19.9 0.75 2.45 5.63 7.00 11 13 13.50 8 5/8"-11NC 405TC All 39.5 13.75 7.25 19.6 2.875 17.5 6.625 16 10 19.9 0.75 2.45 5.63 7.00 11 13 13.50 8 5/8"-11NC 404TSC All 36.5 12.25 4.25 19.6 2.125 17.5 6.625 16.0 10 19.9 0.5 1.85 2.75 4.00 11 13 13.50 8 5/8"-11NC 405TSC All 36.5 13.75 4.25 19.6 2.125 17.5 6.625 16.0 10 19.9 0.5 1.85 2.75 4.00 11 13 13.50 8 5/8"-11NC 444TC All 45.6 14.5 8.5 21.7 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 8.25 14 16 16.62 8 5/8"-11NC 445TC All 45.6 16.5 8.5 21.7 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 8.25 14 16 16.62 8 5/8"-11NC 444TSC All 41.8 14.5 4.75 21.7 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 4.50 14 16 16.62 8 5/8"-11NC 445TSC All 41.8 16.5 4.75 21.7 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 4.50 14 16 16.62 8 5/8"-11NC 447TC All 49.1 20 8.5 21.8 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 8.25 14 16 16.62 8 5/8"-11NC 447TSC All 45.4 20 4.75 21.8 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 4.50 14 16 16.62 8 5/8"-11NC 449TC All 54.1 25 8.5 21.8 3.375 22 7.5 18 11 21.9 0.875 2.88 6.88 8.25 14 16 16.62 8 5/8"-11NC 449TSC All 50.3 25 4.75 21.8 2.375 22 7.5 18 11 21.9 0.625 2.02 3 4.50 14 16 16.62 8 5/8"-11NC (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-15 Dimensions

Introduction General Purpose SD10 - D Flange Foot Mounted, Footless - Frames 140-320 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U BA AB 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 143TD All 13.17 4 2.25 8.2 0.875 2.25 7.4 11 4 7.5 0.771 0.188 1.41 2.25 10 9.0 10.90 0.53 145TD All 14.15 5 2.25 8.2 0.875 2.25 7.4 11 4 7.5 0.771 0.188 1.41 2.25 10 9.0 10.90 0.53 182TD All 15.43 4.5 2.75 9.6 1.125 2.75 8.2 15 5 11.1 0.986 0.25 1.81 2.75 10 9.0 11.00 0.53 184TD All 16.4 5.5 2.75 9.6 1.125 2.75 8.2 15 5 11.1 0.986 0.25 1.81 2.75 10 9.0 11.00 0.53 213TD All 18.7 5.5 3.38 10.7 1.375 3.5 10.39 17 5 10.66 1.201 0.312 2.44 3.38 10 9.0 10.90 0.53 215TD All 20.2 7 3.38 10.7 1.375 3.5 10.39 17 5 10.66 1.201 0.312 2.44 3.38 10 9.0 10.90 0.53 254TD All 24.02 8.25 4 12.9 1.625 4.25 11.14 20.0 6 12.75 1.416 0.375 2.91 4.00 13 11.0 13.90 0.81 256TD All 25.77 10 4 12.9 1.625 4.25 11.14 20.0 6 12.75 1.416 0.375 2.91 4.00 13 11.0 13.90 0.81 284TD All 27.4 9.5 4.63 15.5 1.875 13.4 4.75 11 7 14.19 0.5 1.59 3.25 4.62 13 11.0 13.88 4 0.812 286TD All 28.9 11 4.63 15.5 1.875 13.4 4.75 11 7 14.19 0.5 1.59 3.25 4.62 13 11.0 13.88 4 0.812 284TSD All 26 9.5 3.25 15.5 1.625 13.4 4.75 11 7 14.19 0.375 1.42 1.88 3.25 13 11.0 13.88 4 0.812 286TSD All 27.5 11 3.25 15.5 1.625 13.4 4.75 11 7 14.19 0.375 1.42 1.88 3.25 13 11.0 13.88 4 0.812 324TD All 32 10.5 5.25 17.1 2.125 15.75 5.25 13 8 15.94 0.5 1.85 3.88 5.25 16 14.0 17.88 4 0.812 326TD All 32 12 5.25 17.1 2.125 15.75 5.25 13 8 15.94 0.5 1.85 3.88 5.25 16 14.0 17.88 4 0.812 324TSD All 30 10.5 3.75 17.1 1.875 15.75 5.25 13 8 15.94 0.5 1.59 2 3.75 16 14.0 17.88 4 0.812 326TSD All 30 12 3.75 17.1 1.875 15.75 5.25 13 8 15.94 0.5 1.59 2 3.75 16 14.0 17.88 4 0.812 (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet 11-16 2009-2010 Low Voltage AC Selection and Pricing Guide

SD10 - D Flange Foot Mounted, Footless - Frames 360-440 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U BA AB 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 364TD All 34.2 11 5.88 18.5 2.375 17.69 5.88 14 9 17.81 0.625 2.02 4.25 5.88 16 14 17.88 4 0.81 365TD All 34.2 12 5.88 18.5 2.375 17.69 5.88 14 9 17.81 0.625 2.02 4.25 5.88 16 14 17.88 4 0.81 364TSD All 32.1 11.25 3.75 18.5 1.875 17.69 5.88 14 9 17.81 0.500 1.59 2 3.75 16 14 17.88 4 0.81 365TSD All 32.1 12.25 3.75 18.5 1.875 17.69 5.88 14 9 17.81 0.500 1.59 2 3.75 16 14 17.88 4 0.81 404TD All 39.5 12.25 7.25 19.6 2.875 17.5 6.625 16 10 19.9 0.75 2.45 5.63 7.25 20 18 21.88 8 0.81 405TD All 39.5 13.75 7.25 19.6 2.875 17.5 6.625 16 10 19.9 0.75 2.45 5.63 7.25 20 18 21.88 8 0.81 404TSD All 36.5 12.25 4.25 19.6 2.125 17.5 6.625 16.0 10 19.9 0.5 1.85 2.75 4.25 20 18 21.88 8 0.81 405TSD All 36.5 13.75 4.25 19.6 2.125 17.5 6.625 16.0 10 19.9 0.5 1.85 2.75 4.25 20 18 21.88 8 0.81 444TD All 45.6 14.5 8.5 21.7 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 8.50 20 18 21.88 8 0.81 445TD All 45.6 16.5 8.5 21.7 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 8.50 20 18 21.88 8 0.81 444TSD All 41.8 14.5 4.75 21.7 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 4.75 20 18 21.88 8 0.81 445TSD All 41.8 16.5 4.75 21.7 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 4.75 20 18 21.88 8 0.81 447TD All 49.1 20 8.5 21.8 3.375 19.94 7.5 18 11 21.9 0.875 2.88 6.88 8.50 20 18 21.88 8 0.81 447TSD All 45.4 20 4.75 21.8 2.375 19.94 7.5 18 11 21.9 0.625 2.02 3 4.75 20 18 21.88 8 0.81 449TD All 54.1 25 8.5 21.8 3.375 22 7.5 18 11 21.9 0.875 2.88 6.88 8.50 20 18 21.88 8 0.81 449TSD All 50.3 25 4.75 21.8 2.375 22 7.5 18 11 21.9 0.625 2.02 3 4.75 20 18 21.88 8 0.81 (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet 2009-2010 Low Voltage AC Selection and Pricing Guide 11-17 Dimensions

Introduction General Purpose - Foot Mounted - Frames 143-320 Purpose Frame Poles C 2F N-W (1) P U BA AB 2E D O Keyseat R S ES 143T 14.15 4 2.25 8.2 0.875 2.25 7.4 11 4 7.5 0.771 0.188 1.41 145T 14.15 5 2.25 8.2 0.875 2.25 7.4 11 4 7.5 0.771 0.188 1.41 182T 16.4 4.5 2.75 9.6 1.125 2.75 8.2 15 5 11.1 0.986 0.25 1.81 184T 16.4 5.5 2.75 9.6 1.125 2.75 8.2 15 5 11.1 0.986 0.25 1.81 213T 20.2 5.5 3.38 10.7 1.375 3.5 10.39 17 5 10.66 1.201 0.312 2.44 215T 20.2 7 3.38 10.7 1.375 3.5 10.39 17 5 10.66 1.201 0.312 2.44 254T 25.77 8.25 4 12.9 1.625 4.25 11.14 20.0 6 12.75 1.416 0.375 2.91 256T 25.77 10 4 12.9 1.625 4.25 11.14 20.0 6 12.75 1.416 0.375 2.91 284T 4,6 29.38 9.5 4.625 15.8 1.875 4.75 14.3 11 7 14.87 0.5 1.591 3.25 286T 4,6 29.38 11 4.625 15.8 1.875 4.75 14.3 11 7 14.87 0.5 1.591 3.25 284TS 2 26 9.5 3.25 14.4 1.625 4.75 13.39 11 7 14.27 0.375 1.416 1.88 284TS 4,6 28.01 9.5 3.25 15.8 1.625 4.75 14.33 11 7 14.87 0.375 1.416 1.88 286TS 2 27.5 11 3.25 14.4 1.625 4.75 13.39 11 7 14.27 0.375 1.416 1.88 286TS 4,6 28.01 11 3.25 15.8 1.625 4.75 14.33 11 7 14.87 0.375 1.416 1.88 324T 4,6 32.07 10.5 5.25 17.7 2.125 5.25 15.99 13 8 16.66 0.5 1.845 3.88 326T 4,6 32.07 12 5.25 17.7 2.125 5.25 15.99 13 8 16.66 0.5 1.845 3.88 324TS 2 30 10.5 3.75 15.8 1.875 5.25 15.5 13 8 15.9 0.5 1.591 2 324TS 4,6 30.57 10.5 3.75 17.7 1.875 5.25 15.99 13 8 16.66 0.5 1.591 2 326TS 2 30 12 3.75 15.8 1.875 5.25 15.5 13 8 15.9 0.5 1.591 2 326TS 4,6 30.57 12 3.75 17.7 1.875 5.25 15.99 13 8 16.66 0.5 1.591 2 * Optional 4.5 inch AK is available for 182/184TC frame motors. Contact factory if required. (1) Not according to NEMA standard. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. Dimensions Duty Duty 11-18 2009-2010 Low Voltage AC Selection and Pricing Guide

- Foot Mounted - Frames 360-440 Introduction General Purpose Duty Duty Frame Poles C 2F N-W (1) P U BA AB 2E D O Keyseat R S ES 364T 4,6 35.53 11 5.88 19.6 2.375 5.88 18.57 14 9 18.48 0.625 2.021 4.25 365T 4,6 35.53 12 5.88 19.6 2.375 5.88 18.57 14 9 18.48 0.625 2.021 4.25 364TS 2 32.06 11.25 3.75 17.7 1.875 5.88 17.94 14 9 17.81 0.500 1.59 2 364TS 4,6 33.4 11.25 3.75 19.6 1.875 5.88 18.57 14 9 18.48 0.500 1.59 2 365TS 2 32.06 12.25 3.75 17.7 1.875 5.88 17.94 14 9 17.81 0.5 1.591 2 365TS 4,6 33.4 12.25 3.75 19.6 1.875 5.88 18.57 14 9 18.48 0.5 1.591 2 404T 39.4 12.25 7.25 19.6 2.875 6.62 18.38 16.0 10 19.6 0.75 2.45 5.63 405T 39.4 13.75 7.25 19.6 2.875 6.62 18.38 16.0 10 19.6 0.75 2.45 5.63 404TS 36.4 12.25 4.25 19.6 2.125 6.62 18.38 16 10 19.6 0.5 1.845 2.75 405TS 36.4 13.75 4.25 19.6 2.125 6.62 18.38 16 10 19.6 0.5 1.845 2.75 444T 45.58 14.5 8.5 21.8 3.375 7.5 19.63 18 11 21.8 0.875 2.88 6.88 445T 45.58 16.5 8.5 21.8 3.375 7.5 19.63 18 11 21.8 0.875 2.88 6.88 444TS 41.82 14.5 4.75 21.8 2.375 7.5 19.63 18 11 21.8 0.625 2.021 3.05 445TS 41.82 16.5 4.75 21.8 2.375 7.5 19.63 18 11 21.8 0.625 2.021 3.05 447T 49 20 8.5 21.8 3.375 7.5 19.63 18 11 22 0.875 2.88 6.88 447TS 45.26 20 4.75 21.8 2.375 7.5 19.63 18 11 22 0.625 2.021 3.05 449T 54 25 8.5 21.8 3.375 7.5 22 18 11 22 0.875 2.88 6.88 449TS 50.3 25 4.75 21.8 2.375 7.5 22 18 11 22 0.625 2.021 3.05 S449LS 63.6 25 9.12 24.6 3.625 7.5 23 18 11 23.3 0.875 3.134 7.5 S449SS 59.8 25 5.25 24.6 2.625 7.5 23 18 11 23.3 0.625 2.275 3.5 S449SS * 63.2 25 5.25 24.6 2.625 7.5 23 18 11 23.3 0.625 2.275 3.5 * Only for 400HP, 2 Pole. (1) Not according to NEMA standard. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. Purpose 2009-2010 Low Voltage AC Selection and Pricing Guide 11-19 Dimensions

Introduction General Purpose - C-Face Foot Mounted, Footless - Frames 140-320 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U BA AB 2E D O 11-20 2009-2010 Low Voltage AC Selection and Pricing Guide Keyseat C-Face R S ES AH AJ AK BD BF # BF 143TC 14.15 4 2.25 8.2 0.875 2.25 (1) 7.4 11 4 7.5 0.771 0.188 1.41 1.96 6 4.5 6.50 4 3/8"-16NC 145TC 14.15 5 2.25 8.2 0.875 2.25 (1) 7.4 11 4 7.5 0.771 0.188 1.41 1.96 6 4.5 6.50 4 3/8"-16NC 182TC 16.4 4.5 2.75 9.6 1.125 2.75 (1) 8.2 15 5 11.1 0.986 0.25 1.81 2.62 7 8.5 9.00 4 1/2"-13NC 182TCH 16.4 4.5 2.75 9.6 1.125 2.75 (1) 8.2 15 5 11.1 0.986 0.25 1.81 2.62 6 4.5 6.50 4 1/2"-13NC 184TC 16.4 5.5 2.75 9.6 1.125 2.75 (1) 8.2 15 5 11.1 0.986 0.25 1.81 2.62 7 8.5 9.00 4 1/2"-13NC 184TCH 16.4 5.5 2.75 9.6 1.125 2.75 (1) 8.2 15 5 11.1 0.986 0.25 1.81 2.62 6 4.5 6.50 4 1/2"-13NC 213TC 20.2 5.5 3.38 10.7 1.375 3.5 (1) 10.39 17 5 10.66 1.201 0.312 2.44 3.12 7 8.5 9.00 4 1/2"-13NC 215TC 20.2 7 3.38 10.7 1.375 3.5 (1) 10.39 17 5 10.66 1.201 0.312 2.44 3.12 7 8.5 9.00 4 1/2"-13NC 254TC 25.77 8.25 4 12.9 1.625 4.25 (1) 11.14 20.0 6 12.75 1.416 0.375 2.91 3.75 7 8.5 10.00 4 1/2"-13NC 256TC 25.77 10 4 12.9 1.625 4.25 (1) 11.14 20.0 6 12.75 1.416 0.375 2.91 3.75 7 8.5 10.00 4 1/2"-13NC 284TC 4,6 29.38 9.5 4.625 15.8 1.875 4.75 14.3 11 7 14.87 0.5 1.591 3.25 4.38 9 10.5 11.25 4 1/2"-13NC 286TC 4,6 29.38 11 4.625 15.8 1.875 4.75 14.3 11 7 14.87 0.5 1.591 3.25 4.38 9 10.5 11.25 4 1/2"-13NC 284TSC 2 26 9.5 3.25 14.4 1.625 4.75 13.39 11 7 14.27 0.375 1.416 1.88 3.00 9 10.5 11.25 4 1/2"-13NC 284TSC 4,6 28.01 9.5 3.25 15.8 1.625 4.75 14.33 11 7 14.87 0.375 1.416 1.88 3.00 9 10.5 11.25 4 1/2"-13NC 286TSC 2 27.5 11 3.25 14.4 1.625 4.75 13.39 11 7 14.27 0.375 1.416 1.88 3.00 9 10.5 11.25 4 1/2"-13NC 286TSC 4,6 28.01 11 3.25 15.8 1.625 4.75 14.33 11 7 14.87 0.375 1.416 1.88 3.00 9 10.5 11.25 4 1/2"-13NC 324TC 4,6 32.07 10.5 5.25 17.7 2.125 5.25 15.99 13 8 16.66 0.5 1.845 3.88 5.00 11 12.5 14.00 4 5/8"-11NC 326TC 4,6 32.07 12 5.25 17.7 2.125 5.25 15.99 13 8 16.66 0.5 1.845 3.88 5.00 11 12.5 14.00 4 5/8"-11NC 324TSC 2 30 10.5 3.75 15.8 1.875 5.25 15.5 13 8 15.9 0.5 1.591 2 3.50 11 13 14.00 4 5/8"-11NC 324TSC 4,6 30.57 10.5 3.75 17.7 1.875 5.25 15.99 13 8 16.66 0.5 1.591 2 3.50 11 13 14.00 4 5/8"-11NC 326TSC 2 30 12 3.75 15.8 1.875 5.25 15.5 13 8 15.9 0.5 1.591 2 3.50 11 13 14.00 4 5/8"-11NC 326TSC 4,6 30.57 12 3.75 17.7 1.875 5.25 15.99 13 8 16.66 0.5 1.591 2 3.50 11 13 14.00 4 5/8"-11NC (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet.

- C-Face Foot Mounted, Footless - Frames 360 - S440 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U BA AB 2E D O Keyseat C-Face R S ES AH AJ AK BD BF # BF 364T 4,6 35.53 11 5.88 19.6 2.375 5.88 18.57 14 9 18.48 0.625 2.021 4.25 5.63 11 13 12.75 8 5/8"-11NC 365T 4,6 35.53 12 5.88 19.6 2.375 5.88 18.57 14 9 18.48 0.625 2.021 4.25 5.63 11 13 12.75 8 5/8"-11NC 364TS 2 32.06 11.25 3.75 17.7 1.875 5.88 17.94 14 9 17.81 0.500 1.59 2 3.50 11 13 14.00 8 5/8"-11NC 364TS 4,6 33.4 11.25 3.75 19.6 1.875 5.88 18.57 14 9 18.48 0.500 1.59 2 3.50 11 13 12.75 8 5/8"-11NC 365TS 2 32.06 12.25 3.75 17.7 1.875 5.88 17.94 14 9 17.81 0.5 1.591 2 3.50 11 13 14.00 8 5/8"-11NC 365TS 4,6 33.4 12.25 3.75 19.6 1.875 5.88 18.57 14 9 18.48 0.5 1.591 2 3.50 11 13 12.75 8 5/8"-11NC 404T 39.4 12.25 7.25 19.6 2.875 6.62 18.38 16.0 10 19.6 0.75 2.45 5.63 7.00 11 13 15.50 8 5/8"-11NC 405T 39.4 13.75 7.25 19.6 2.875 6.62 18.38 16.0 10 19.6 0.75 2.45 5.63 7.00 11 13 15.50 8 5/8"-11NC 404TS 36.4 12.25 4.25 19.6 2.125 6.62 18.38 16 10 19.6 0.5 1.845 2.75 4.00 11 13 15.50 8 5/8"-11NC 405TS 36.4 13.75 4.25 19.6 2.125 6.62 18.38 16 10 19.6 0.5 1.845 2.75 4.00 11 13 15.50 8 5/8"-11NC 444T 45.58 14.5 8.5 21.8 3.375 7.5 19.63 18 11 21.8 0.875 2.88 6.88 8.25 14 16 18.00 8 5/8"-11NC 445T 45.58 16.5 8.5 21.8 3.375 7.5 19.63 18 11 21.8 0.875 2.88 6.88 8.25 14 16 18.00 8 5/8"-11NC 444TS 41.82 14.5 4.75 21.8 2.375 7.5 19.63 18 11 21.8 0.625 2.021 3.05 4.50 14 16 18.00 8 5/8"-11NC 445TS 41.82 16.5 4.75 21.8 2.375 7.5 19.63 18 11 21.8 0.625 2.021 3.05 4.50 14 16 18.00 8 5/8"-11NC 447T 49 20 8.5 21.8 3.375 7.5 19.63 18 11 22 0.875 2.88 6.88 8.25 14 16 18.00 8 5/8"-11NC 447TS 45.26 20 4.75 21.8 2.375 7.5 19.63 18 11 22 0.625 2.021 3.05 4.50 14 16 18.00 8 5/8"-11NC 449T 54 25 8.5 21.8 3.375 7.5 22 18 11 22 0.875 2.88 6.88 8.25 14 16 18.00 8 5/8"-11NC 449TS 50.3 25 4.75 21.8 2.375 7.5 22 18 11 22 0.625 2.021 3.05 4.50 14 16 18.00 8 5/8"-11NC S449LS 63.6 25 9.12 24.6 3.625 7.5 23 18 11 23.3 0.875 3.134 7.5 8.25 14 16 18.00 8 5/8"-11NC S449SS 59.8 25 5.25 24.6 2.625 7.5 23 18 11 23.3 0.625 2.275 3.5 4.50 14 16 18.00 8 5/8"-11NC (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-21 Dimensions

Introduction General Purpose - D Flange Foot Mounted, Footless - Frames 140-320 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U BA AB 2E D O 11-22 2009-2010 Low Voltage AC Selection and Pricing Guide Keyseat D Flange R S ES AH AJ AK BD BF # BF 143TD 14.15 4 2.25 8.2 0.875 2.25 (1) 7.4 11 4 7.5 0.771 0.188 1.41 2.00 10 4.5 11.00 4 0.53 145TD 14.15 5 2.25 8.2 0.875 2.25 (1) 7.4 11 4 7.5 0.771 0.188 1.41 2.00 10 9.0 11.00 4 0.53 182TD 16.4 4.5 2.75 9.6 1.125 2.75 (1) 8.2 15 5 11.1 0.986 0.25 1.81 2.50 10 9.0 11.00 4 0.53 184TD 16.4 5.5 2.75 9.6 1.125 2.75 (1) 8.2 15 5 11.1 0.986 0.25 1.81 2.50 10 9.0 11.00 4 0.53 213TD 20.2 5.5 3.38 10.7 1.375 2.75 (1) 10.39 17 5 10.66 1.201 0.312 2.44 3.13 10 9.0 11.00 4 0.53 215TD 20.2 7 3.38 10.7 1.375 2.75 (1) 10.39 17 5 10.66 1.201 0.312 2.44 3.13 10 9.0 11.00 4 0.53 254TD 25.77 8.25 4 12.9 1.625 3.5 (1) 11.14 20.0 6 12.75 1.416 0.375 2.91 3.75 13 11.0 14.00 4 0.81 256TD 25.77 10 4 12.9 1.625 3.5 (1) 11.14 20.0 6 12.75 1.416 0.375 2.91 3.75 13 11.0 14.00 4 0.81 284TD 4,6 29.38 9.5 4.625 15.8 1.875 4.25 (1) 14.3 11 7 14.87 0.5 1.591 3.25 4.37 13 11.0 14.00 4 0.81 286TD 4,6 29.38 11 4.625 15.8 1.875 4.25 (1) 14.3 11 7 14.87 0.5 1.591 3.25 4.37 13 11.0 14.00 4 0.81 284TSD 2 26 9.5 3.25 14.4 1.625 4.75 13.39 11 7 14.27 0.375 1.416 1.88 3.00 13 11.0 14.00 4 0.81 284TSD 4,6 28.01 9.5 3.25 15.8 1.625 4.75 14.33 11 7 14.87 0.375 1.416 1.88 3.00 13 11.0 14.00 4 0.81 286TSD 2 27.5 11 3.25 14.4 1.625 4.75 13.39 11 7 14.27 0.375 1.416 1.88 3.00 13 11.0 14.00 4 0.81 286TSD 4,6 28.01 11 3.25 15.8 1.625 4.75 14.33 11 7 14.87 0.375 1.416 1.88 3.00 13 11.0 14.00 4 0.81 324TD 4,6 32.07 10.5 5.25 17.7 2.125 5.25 15.99 13 8 16.66 0.5 1.845 3.88 5.00 16 14.0 18.00 4 0.81 326TD 4,6 32.07 12 5.25 17.7 2.125 5.25 15.99 13 8 16.66 0.5 1.845 3.88 5.00 16 14.0 18.00 4 0.81 324TSD 2 30 10.5 3.75 15.8 1.875 5.25 15.5 13 8 15.9 0.5 1.591 2 3.50 16 14 18.00 4 0.81 324TSD 4,6 30.57 10.5 3.75 17.7 1.875 5.25 15.99 13 8 16.66 0.5 1.591 2 3.50 16 14 18.00 4 0.81 326TSD 2 30 12 3.75 15.8 1.875 5.25 15.5 13 8 15.9 0.5 1.591 2 3.50 16 14 18.00 4 0.81 326TSD 4,6 30.57 12 3.75 17.7 1.875 5.25 15.99 13 8 16.66 0.5 1.591 2 3.50 16 14 18.00 4 0.81 (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet

- D Flange Foot Mounted, Footless - Frames 360 - S440 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U BA AB 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 364TD 4,6 35.53 11 5.88 19.6 2.375 5.88 18.57 14 9 18.48 0.625 2.021 4.25 5.63 16 14 18.00 4 0.81 365TD 4,6 35.53 12 5.88 19.6 2.375 5.88 18.57 14 9 18.48 0.625 2.021 4.25 5.63 16 14 18.00 4 0.81 364TSD 2 32.06 11.25 3.75 17.7 1.875 5.88 17.94 14 9 17.81 0.500 1.59 2 3.50 16 14 18.00 4 0.81 364TSD 4,6 33.4 11.25 3.75 19.6 1.875 5.88 18.57 14 9 18.48 0.500 1.59 2 3.50 16 14 18.00 4 0.81 365TSD 2 32.06 12.25 3.75 17.7 1.875 5.88 17.94 14 9 17.81 0.5 1.591 2 3.50 16 14 18.00 4 0.81 365TSD 4,6 33.4 12.25 3.75 19.6 1.875 5.88 18.57 14 9 18.48 0.5 1.591 2 3.50 16 14 18.00 4 0.81 404TD 39.4 12.25 7.25 19.6 2.875 6.62 18.38 16.0 10 19.6 0.75 2.45 5.63 7.00 20 18 22.00 4 0.81 405TD 39.4 13.75 7.25 19.6 2.875 6.62 18.38 16.0 10 19.6 0.75 2.45 5.63 7.00 20 18 22.00 4 0.81 404TSD 36.4 12.25 4.25 19.6 2.125 6.62 18.38 16 10 19.6 0.5 1.845 2.75 4.00 20 18 22.00 4 0.81 405TSD 36.4 13.75 4.25 19.6 2.125 6.62 18.38 16 10 19.6 0.5 1.845 2.75 4.00 20 18 22.00 4 0.81 444TD 45.58 14.5 8.5 21.8 3.375 7.5 19.63 18 11 21.8 0.875 2.88 6.88 8.25 20 18 22.00 8 0.81 445TD 45.58 16.5 8.5 21.8 3.375 7.5 19.63 18 11 21.8 0.875 2.88 6.88 8.25 20 18 22.00 8 0.81 444TSD 41.82 14.5 4.75 21.8 2.375 7.5 19.63 18 11 21.8 0.625 2.021 3.05 4.50 20 18 22.00 8 0.81 445TSD 41.82 16.5 4.75 21.8 2.375 7.5 19.63 18 11 21.8 0.625 2.021 3.05 4.50 20 18 22.00 8 0.81 447TD 49 20 8.5 21.8 3.375 7.5 19.63 18 11 22 0.875 2.88 6.88 8.25 20 18 22.00 8 0.81 447TSD 45.26 20 4.75 21.8 2.375 7.5 19.63 18 11 22 0.625 2.021 3.05 4.50 20 18 22.00 8 0.81 449TD 54 25 8.5 21.8 3.375 7.5 22 18 11 22 0.875 2.88 6.88 8.25 20 18 22.00 8 0.81 449TSD 50.3 25 4.75 21.8 2.375 7.5 22 18 11 22 0.625 2.021 3.05 4.50 20 18 22.00 8 0.81 S449LSD 63.6 25 9.12 24.6 3.625 7.5 23 18 11 23.3 0.875 3.134 7.5 8.25 20 18 22.00 8 0.81 S449SSD 59.8 25 5.25 24.6 2.625 7.5 23 18 11 23.3 0.625 2.275 3.5 4.50 20 18 22.00 8 0.81 (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet 2009-2010 Low Voltage AC Selection and Pricing Guide 11-23 Dimensions

Introduction General Purpose (Cast Iron Frame) - Foot Mounted - Frames 143-320 Duty Duty Purpose Dimensions Frame Poles C 2F N-W P U AB BA (1) 2E D O 11-24 2009-2010 Low Voltage AC Selection and Pricing Guide Keyseat R S ES 143T 2,4,6,8 13.97 4 1.77 8.1 0.875 7.05 2.73 5.5 4 7.42 0.771 0.188 1.41 145T 2,4,6,8 13.97 5 1.77 8.1 0.875 7.05 2.73 5.5 4 7.42 0.771 0.188 1.41 182T 2,8 14.8 4.5 2.46 9.0 1.125 8 3.03 7.5 5 9 0.986 0.25 1.78 182T 4,6 16.22 4.5 2.46 10.8 1.125 8.58 3.03 7.5 5 9.74 0.986 0.25 1.78 184T 2,8 15.9 5.5 2.46 9.0 1.125 8 3.03 7.5 5 9 0.986 0.25 1.78 184T 4,6 16.22 5.5 2.46 10.8 1.125 8.58 3.03 7.5 5 9.74 0.986 0.25 1.78 213T 2,8 18.15 5.5 2.88 10.6 1.375 9.4 4 8.5 5 10.43 1.201 0.312 2.41 213T 4,6 20.27 5.5 2.85 12.2 1.375 10.63 4.03 8.5 5 11.35 1.201 0.312 2.41 215T 2,8 19.7 7 2.88 10.6 1.375 9.4 4 9 5 10.43 1.201 0.312 2.41 215T 4,6 20.27 7 2.85 12.2 1.375 10.63 4.03 9 5 11.35 1.201 0.312 2.41 254T 2,8 23.15 8.25 3.55 12.7 1.625 10.65 4.7 10 6 12.33 1.416 0.375 2.91 254T 4,6 25.83 8.25 3.47 14.4 1.625 11.62 4.78 10 6 13.34 1.416 0.375 2.91 256T 2,8 24.85 10 3.55 12.7 1.625 10.65 4.7 10 6.25 12.33 1.416 0.375 2.91 256T 4,6 25.83 10 3.47 14.4 1.625 11.62 4.78 10 6.25 13.34 1.416 0.375 2.91 284T 8 27.4 9.5 4.17 14.4 1.875 13.39 5.2 11 7 14.27 1.591 0.5 3.25 284T 4,6 29.38 9.5 4.09 15.8 1.875 14.3 5.29 11 7 14.87 1.591 0.5 3.25 286T 8 28.9 11 4.17 14.4 1.875 13.39 5.2 11 7 14.27 1.591 0.5 3.25 286T 4,6 29.38 11 4.09 15.8 1.875 14.3 5.29 11 7 14.87 1.591 0.5 3.25 284TS 2,8 26 9.5 2.8 14.4 1.625 13.39 5.2 11 7 14.27 1.416 0.375 1.88 284TS 4,6 28.01 9.5 2.72 15.8 1.625 14.33 5.28 11 7 14.87 1.416 0.375 1.88 286TS 2,8 27.5 11 2.8 14.4 1.625 13.39 5.2 11 7 14.27 1.416 0.375 1.88 286TS 4,6 28.01 11 2.72 15.8 1.625 14.33 5.28 11 7 14.87 1.416 0.375 1.88 324T 8 31.5 10.5 4.75 15.8 2.125 15.5 5.75 13 8 15.9 1.845 0.5 3.88 324T 4,6 32.07 10.5 4.69 17.7 2.125 15.99 5.8 13 8 16.66 1.845 0.5 3.88 326T 8 31.5 12 4.75 15.8 2.125 15.5 5.75 13 8 15.9 1.845 0.5 3.88 326T 4,6 32.07 12 4.69 17.7 2.125 15.99 5.8 13 8 16.66 1.845 0.5 3.88 324TS 2 30 10.5 3.25 15.8 1.875 15.5 5.75 13 8 15.9 1.591 0.5 2 324TS 4,6 30.57 10.5 3.25 17.7 1.875 15.99 5.75 13 8 16.66 1.591 0.5 2 326TS 2 30 12 3.25 15.8 1.875 15.5 5.75 13 8 15.9 1.591 0.5 2 326TS 4,6 30.57 12 3.25 17.7 1.875 15.99 5.75 13 8 16.66 1.591 0.5 2 (1) Not according to NEMA standard. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames.

(Cast Iron Frame) - Foot Mounted - Frames 360-440 Introduction General Purpose Duty Duty Frame Poles C 2F N-W P U AB BA (1) 2E D O Keyseat R S ES 364T 8 34.19 11 5.44 17.7 2.375 17.94 6.31 14 9 17.81 2.021 0.625 4.25 364T 4,6 35.53 11 5.4 19.6 2.375 18.57 6.35 14 9 18.48 2.021 0.625 4.25 365T 8 34.19 12.25 5.44 17.7 2.375 17.94 6.31 14 9 17.81 2.021 0.63 4.25 365T 4,6 35.53 12.25 5.4 19.6 2.375 18.57 6.35 14 9 18.48 2.021 0.63 4.25 364TS 2 32.06 11.25 3.31 17.7 1.875 17.94 6.31 14 9 17.81 1.591 0.5 2 364TS 4,6 33.4 11.25 3.28 19.6 1.875 18.57 6.35 14 9 18.48 1.591 0.5 2 365TS 2 32.06 12.25 3.31 17.7 1.875 17.94 6.31 14.0 9 17.81 1.591 0.5 2 365TS 4,6 33.4 12.25 3.28 19.6 1.875 18.57 6.35 14.0 9 18.48 1.591 0.5 2 404T 39.4 12.25 6.78 19.6 2.875 18.38 7.1 16 10 19.6 2.45 0.75 5.63 405T 39.4 13.75 6.78 19.6 2.875 18.38 7.1 16 10 19.6 2.45 0.75 5.63 404TS 36.4 12.25 3.5 19.6 2.125 18.38 7.38 16 10 19.6 1.845 0.5 2.75 405TS 36.4 13.75 3.5 19.6 2.125 18.38 7.38 16 10 19.6 1.845 0.5 2.75 444T 45.58 14.5 8.1 21.8 3.375 19.63 7.9 18 11 21.8 2.88 0.875 6.88 445T 45.58 16.5 8.1 21.8 3.375 19.63 7.9 18 11 21.8 2.88 0.875 6.88 444TS 41.82 14.5 4 21.8 2.375 19.63 8.25 18 11 21.8 2.021 0.625 3.05 445TS 41.82 16.5 4 21.8 2.375 19.63 8.25 18 11 21.8 2.021 0.625 3.05 447T 49 20 8.03 21.8 3.375 19.63 7.96 18 11 22 2.88 0.875 6.88 447TS 45.26 20 4 21.8 2.375 19.63 8.25 18 11 22 2.021 0.625 3.05 449T 54 25 8.03 21.8 3.375 22 7.96 18 11 22 2.88 0.875 6.88 449TS 50.3 25 4 21.8 2.375 22 8.25 18 11 22 2.021 0.625 3.05 S449LS 63.6 25 8.67 24.6 3.625 23 7.95 18 11 23.3 3.134 0.875 7.5 S449LS ** 66.7 25 8.67 24.6 3.625 23 7.95 18 11 23.3 3.134 0.875 7.5 S449SS 59.8 25 4.59 24.6 2.625 23 8.16 18 11 23.3 2.275 0.625 3.5 S449SS * 63.2 25 4.59 24.6 2.625 23 8.16 18 11 23.3 2.275 0.625 3.5 (1) Not according to NEMA standard. ** Only for 400HP, 2 Pole. ** Only for 300, 350 & 400HP, 4 Pole. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-25 Purpose Dimensions

Introduction General Purpose C-Face Foot Mounted, Footless - Frames 140-280 Purpose Duty Dimensions Duty Frame Poles C 2F N-W P U AB BA (1) 2E D O 11-26 2009-2010 Low Voltage AC Selection and Pricing Guide Keyseat C-Face R S ES AH AJ AK BD BF # BF 143TC 2,4,6 13.97 4 1.77 8.1 0.875 7.05 2.73 5.5 4 7.42 0.771 0.188 1.41 1.96 6 4.5 6.50 4 3/8"-16NC 145TC 2,4,6 13.97 5 1.77 8.1 0.875 7.05 2.73 5.5 4 7.42 0.771 0.188 1.41 1.96 6 4.5 6.50 4 3/8"-16NC 182TC 2 14.8 4.5 2.46 9.0 1.125 8 3.03 7.5 5 9 0.986 0.25 1.78 2.62 7 8.5 9.00 4 1/2"-13NC 182TC 4,6 16.22 4.5 2.46 10.8 1.125 8.58 3.03 7.5 5 9.74 0.986 0.25 1.78 2.62 7 8.5 9.00 4 1/2"-13NC 182TCH 2 14.8 4.5 2.46 9.0 1.125 8 3.03 7.5 5 9 0.986 0.25 1.78 2.62 6 4.5 6.50 4 1/2"-13NC 182TCH 4,6 16.22 4.5 2.46 10.8 1.125 8.58 3.03 7.5 5 9.74 0.986 0.25 1.78 2.62 6 4.5 6.50 4 1/2"-13NC 184TC 2 15.9 5.5 2.46 9.0 1.125 8 3.03 7.5 5 9 0.986 0.25 1.78 2.62 7 8.5 9.00 4 1/2"-13NC 184TC 4,6 16.22 5.5 2.46 10.8 1.125 8.58 3.03 7.5 5 9.74 0.986 0.25 1.78 2.62 7 8.5 9.00 4 1/2"-13NC 184TCH 2 15.9 5.5 2.46 9.0 1.125 8 3.03 7.5 5 9 0.986 0.25 1.78 2.62 6 4.5 6.50 4 1/2"-13NC 184TCH 4,6 16.22 5.5 2.46 10.8 1.125 8.58 3.03 7.5 5 9.74 0.986 0.25 1.78 2.62 6 4.5 6.50 4 1/2"-13NC 213TC 2 18.15 5.5 2.88 10.6 1.375 9.4 4 8.5 5 10.43 1.201 0.31 2.41 3.12 7 8.5 9.00 4 1/2"-13NC 213TC 4,6 20.27 5.5 2.85 12.2 1.375 10.63 4.03 8.5 5 11.35 1.201 0.31 2.41 3.12 7 8.5 9.00 4 1/2"-13NC 215TC 2 19.7 7 2.88 10.6 1.375 9.4 4 8.5 5 10.43 1.201 0.31 2.41 3.12 7 8.5 9.00 4 1/2"-13NC 215TC 4,6 20.27 7 2.85 12.2 1.375 10.63 4.03 8.5 5 11.35 1.201 0.31 2.41 3.12 7 8.5 9.00 4 1/2"-13NC 254TC 2 23.15 8.25 3.55 12.7 1.625 10.65 4.7 10 6 12.33 1.416 0.375 2.91 3.75 7 8.5 10.00 4 1/2"-13NC 254TC 4,6 25.83 8.25 3.47 14.4 1.625 11.62 4.78 10 6 13.34 1.416 0.375 2.91 3.75 7 8.5 10.00 4 1/2"-13NC 256TC 2 24.85 10 3.55 12.7 1.625 10.65 4.7 10.0 6 12.33 1.416 0.375 2.91 3.75 7 8.5 10.00 4 1/2"-13NC 256TC 4,6 25.83 10 3.47 14.4 1.625 11.62 4.78 10.0 6 13.34 1.416 0.375 2.91 3.75 7 8.5 10.00 4 1/2"-13NC 284TC 4,6 27.4 9.5 4.17 14.4 1.875 13.39 5.2 11 7 14.27 1.591 0.5 3.25 4.38 9 10.5 11.25 4 1/2"-13NC 284TC 4,6 29.38 9.5 4.09 15.8 1.875 14.3 5.29 11 7 14.87 1.591 0.5 3.25 4.38 9 10.5 11.25 4 1/2"-13NC 286TC 4,6 28.9 11 4.17 14.4 1.875 13.39 5.2 11 7 14.27 1.591 0.5 3.25 4.38 9 10.5 11.25 4 1/2"-13NC 286TC 4,6 29.38 11 4.09 15.8 1.875 14.3 5.29 11 7 14.87 1.591 0.5 3.25 4.38 9 10.5 11.25 4 1/2"-13NC (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames.

C-Face Foot Mounted, Footless - Frames 280-360 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U AB BA (1) 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 284TSC 2 26 9.5 2.8 14.4 1.625 13.39 5.2 11 7 14.27 1.416 0.38 1.88 3.00 9 10.5 11.25 4 1/2"-13NC 284TSC 4,6 28.01 9.5 2.72 15.8 1.625 14.33 5.28 11 7 14.87 1.416 0.38 1.88 3.00 9 10.5 11.25 4 1/2"-13NC 286TSC 2 27.5 11 2.8 14.4 1.625 13.39 5.2 11 7 14.27 1.416 0.38 1.88 3.00 9 10.5 11.25 4 1/2"-13NC 286TSC 4,6 28.01 11 2.72 15.8 1.625 14.33 5.28 11 7 14.87 1.416 0.38 1.88 3.00 9 10.5 11.25 4 1/2"-13NC 324TC 4,6 31.5 10.5 4.75 15.8 2.125 15.5 5.75 12.5 8 15.9 1.845 0.50 3.88 5.00 11 12.5 14.00 4 5/8"-11NC 324TC 4,6 32.07 10.5 4.69 17.7 2.125 15.99 5.8 12.5 8 16.66 1.845 0.50 3.88 5.00 11 12.5 14.00 4 5/8"-11NC 326TC 4,6 31.5 12 4.75 15.8 2.125 15.5 5.75 12.5 8 15.9 1.845 0.50 3.88 5.00 11 12.5 14.00 4 5/8"-11NC 326TC 4,6 32.07 12 4.69 17.7 2.125 15.99 5.8 12.5 8 16.66 1.845 0.50 3.88 5.00 11 12.5 14.00 4 5/8"-11NC 324TSC 2 30 10.5 3.25 15.8 1.875 15.5 5.75 12.5 8 15.9 1.591 0.50 2 3.50 11 12.5 14.00 4 5/8"-11NC 324TSC 4,6 30.57 10.5 3.25 17.7 1.875 15.99 5.75 12.5 8 16.66 1.591 0.50 2 3.50 11 12.5 14.00 4 5/8"-11NC 326TSC 2 30 12 3.25 15.8 1.875 15.5 5.75 12.5 8 15.9 1.591 0.5 2 3.50 11 12.5 14.00 4 5/8"-11NC 326TSC 4,6 30.57 12 3.25 17.7 1.875 15.99 5.75 12.5 8 16.66 1.591 0.5 2 3.50 11 12.5 14.00 4 5/8"-11NC 364TC 4,6 34.19 11.25 5.44 17.7 2.375 17.94 6.31 14.0 9 17.81 2.021 0.625 4.25 5.63 11 12.5 12.75 8 5/8"-11NC 364TC 4,6 35.53 11.25 5.4 19.6 2.375 18.57 6.35 14.0 9 18.48 2.021 0.625 4.25 5.63 11 12.5 12.75 8 5/8"-11NC 365TC 4,6 34.19 12.25 5.44 17.7 2.375 17.94 6.31 14 9 17.81 2.021 0.625 4.25 5.63 11 12.5 12.75 8 5/8"-11NC 365TC 4,6 35.53 12.25 5.4 19.6 2.375 18.57 6.35 14 9 18.48 2.021 0.625 4.25 5.63 11 12.5 12.75 8 5/8"-11NC 364TSC 2 32.06 11.25 3.31 17.7 1.875 17.94 6.31 14 9 17.81 1.591 0.5 2 3.50 11 12.5 14.00 8 5/8"-11NC 364TSC 4,6 33.4 11.25 3.28 19.6 1.875 18.57 6.35 14 9 18.48 1.591 0.5 2 3.50 11 12.5 12.75 8 5/8"-11NC 365TSC 2 32.06 12.25 3.31 17.7 1.875 17.94 6.31 14 9 17.81 1.591 0.5 2 3.50 11 12.5 14.00 8 5/8"-11NC 365TSC 4,6 33.4 12.25 3.28 19.6 1.875 18.57 6.35 14 9 18.48 1.591 0.5 2 3.50 11 12.5 12.75 8 5/8"-11NC (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-27 Dimensions

Introduction General Purpose C Face Foot Mounted, Footless - Frames 400 S440 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U AB BA (1) 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 404TC 39.4 12 6.78 19.6 2.875 18.38 7.1 16 10 19.6 2.45 0.75 5.63 7.00 11 12.5 15.50 8 5/8"-11NC 405TC 39.4 14 6.78 19.6 2.875 18.38 7.1 16 10 19.6 2.45 0.75 5.63 7.00 11 12.5 15.50 8 5/8"-11NC 404TSC 36.4 12.25 3.5 19.6 2.125 18.38 7.38 16 10 19.6 1.845 0.50 2.75 4.00 11 12.5 15.50 8 5/8"-11NC 405TSC 36.4 13.75 3.5 19.6 2.125 18.38 7.38 16 10 19.6 1.845 0.50 2.75 4.00 11 12.5 15.50 8 5/8"-11NC 444TC 45.58 14.5 8.1 21.8 3.375 19.63 7.9 18 11 21.8 2.880 0.88 6.88 8.25 14 16.0 18.00 8 5/8"-11NC 445TC 45.58 16.5 8.1 21.8 3.375 19.63 7.9 18 11 21.8 2.880 0.88 6.88 8.25 14 16.0 18.00 8 5/8"-11NC 444TSC 41.82 14.5 4 21.8 2.375 19.63 8.25 18 11 21.8 2.021 0.63 3.05 4.50 14 16.0 18.00 8 5/8"-11NC 445TSC 41.82 16.5 4 21.8 2.375 19.63 8.25 18 11 21.8 2.021 0.63 3.05 4.50 14 16.0 18.00 8 5/8"-11NC 447TC 49 20 8.03 21.8 3.375 19.63 7.96 18 11 22 2.880 0.88 6.88 8.25 14 16.0 18.00 8 5/8"-11NC 447TSC 45.26 20 4 21.8 2.375 19.63 8.25 18 11 22 2.021 0.63 3.05 4.50 14 16.0 18.00 8 5/8"-11NC 449TC 54 25 8.03 21.8 3.375 22 7.96 18 11 22 2.880 0.88 6.88 8.25 14 16.0 18.00 8 5/8"-11NC 449TSC 50.3 25 4 21.8 2.375 22 8.25 18 11 22 2.021 0.63 3.05 4.50 14 16.0 18.00 8 5/8"-11NC S449LS 63.6 25 8.67 24.6 3.625 23 7.95 18 11 23.3 3.134 0.88 7.5 8.25 14 16.0 18.00 8 5/8"-11NC S449LS ** 66.7 25 8.67 24.6 3.625 23 7.95 18 11 23.3 3.134 0.88 7.5 8.25 14 16.0 18.00 8 5/8"-11NC S449SS 59.8 25 4.59 24.6 2.625 23 8.16 18 11 23.3 2.275 0.625 3.5 4.50 14 16.0 18.00 8 5/8"-11NC S449SS * 63.2 25 4.59 24.6 2.625 23 8.16 18 11 23.3 2.275 0.625 3.5 4.50 14 16.0 18.00 8 5/8"-11NC ** Only for 400HP, 2 Pole ** Only for 300, 350 & 400HP, 4 Pole (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. 11-28 2009-2010 Low Voltage AC Selection and Pricing Guide

D Flange Foot Mounted, Footless - Frames 140-280 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U BA (1) BA 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 143TD 2,4,6 13.97 4 1.77 8.1 0.875 7.05 2.73 5.5 4 7.42 0.771 0.188 1.41 2.00 10 4.5 11.00 4 0.53 145TD 2,4,6 13.97 5 1.77 8.1 0.875 7.05 2.73 5.5 4 7.42 0.771 0.188 1.41 2.00 10 9.0 11.00 4 0.53 182TD 2 14.8 4.5 2.46 9.0 1.125 8 3.03 7.5 5 9 0.986 0.25 1.78 2.50 10 9.0 11.00 4 0.53 182TD 4,6 16.22 4.5 2.46 10.8 1.125 8.58 3.03 7.5 5 9.74 0.986 0.25 1.78 2.50 10 9.0 11.00 4 0.53 184TD 2 15.9 5.5 2.46 9.0 1.125 8 3.03 7.5 5 9 0.986 0.25 1.78 2.50 10 9.0 11.00 4 0.53 184TD 4,6 16.22 5.5 2.46 10.8 1.125 8.58 3.03 7.5 5 9.74 0.986 0.25 1.78 2.50 10 9.0 11.00 4 0.53 213TD 2 18.15 5.5 2.88 10.6 1.375 9.4 4 8.5 5 10.43 1.201 0.31 2.41 3.13 10 9.0 11.00 4 0.53 213TD 4,6 20.27 5.5 2.85 12.2 1.375 10.63 4.03 8.5 5 11.35 1.201 0.31 2.41 3.13 10 9.0 11.00 4 0.53 215TD 2 19.7 7 2.88 10.6 1.375 9.4 4 8.5 5 10.43 1.201 0.31 2.41 3.13 10 9.0 11.00 4 0.53 215TD 4,6 20.27 7 2.85 12.2 1.375 10.63 4.03 8.5 5 11.35 1.201 0.31 2.41 3.13 10 9.0 11.00 4 0.53 254TD 2 23.15 8.25 3.55 12.7 1.625 10.65 4.7 10 6 12.33 1.416 0.375 2.91 3.75 13 11.0 14.00 4 0.81 254TD 4,6 25.83 8.25 3.47 14.4 1.625 11.62 4.78 10 6 13.34 1.416 0.375 2.91 3.75 13 11.0 14.00 4 0.81 256TD 2 24.85 10 3.55 12.7 1.625 10.65 4.7 10.0 6 12.33 1.416 0.375 2.91 3.75 13 11.0 14.00 4 0.81 256TD 4,6 25.83 10 3.47 14.4 1.625 11.62 4.78 10.0 6 13.34 1.416 0.375 2.91 3.75 13 11.0 14.00 4 0.81 284TD 4,6 27.4 9.5 4.17 14.4 1.875 13.39 5.2 11 7 14.27 1.591 0.5 3.25 4.37 13 11.0 4 0.81 284TD 4,6 29.38 9.5 4.09 15.8 1.875 14.3 5.29 11 7 14.87 1.591 0.5 3.25 4.37 13 11.0 14.00 4 0.81 286TD 4,6 28.9 11 4.17 14.4 1.875 13.39 5.2 11 7 14.27 1.591 0.5 3.25 4.37 13 11.0 4 0.81 286TD 4,6 29.38 11 4.09 15.8 1.875 14.3 5.29 11 7 14.87 1.591 0.5 3.25 4.37 13 11.0 14.00 4 0.81 (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-29 Dimensions

Introduction General Purpose D Flange Foot Mounted, Footless - Frames 280-360 Purpose Duty Duty Dimensions Frame Poles C 2F N-W P U AB BA (1) 2E D O 11-30 2009-2010 Low Voltage AC Selection and Pricing Guide Keyseat D Flange R S ES AH AJ AK BD BF # BF 284TSD 2 26 9.5 2.8 14.4 1.625 13.39 5.2 11 7 14.27 1.416 0.38 1.88 3.00 13 11.0 14.00 4 0.81 284TSD 4,6 28.01 9.5 2.72 15.8 1.625 14.33 5.28 11 7 14.87 1.416 0.38 1.88 3.00 13 11.0 14.00 4 0.81 286TSD 2 27.5 11 2.8 14.4 1.625 13.39 5.2 11 7 14.27 1.416 0.38 1.88 3.00 13 11.0 14.00 4 0.81 286TSD 4,6 28.01 11 2.72 15.8 1.625 14.33 5.28 11 7 14.87 1.416 0.38 1.88 3.00 13 11.0 14.00 4 0.81 324TD 4,6 31.5 10.5 4.75 15.8 2.125 15.5 5.75 12.5 8 15.9 1.845 0.50 3.88 5.00 16 14.0 18.00 4 0.81 324TD 4,6 32.07 10.5 4.69 17.7 2.125 15.99 5.8 12.5 8 16.66 1.845 0.50 3.88 5.00 16 14.0 18.00 4 0.81 326TD 4,6 31.5 12 4.75 15.8 2.125 15.5 5.75 12.5 8 15.9 1.845 0.50 3.88 5.00 16 14.0 18.00 4 0.81 326TD 4,6 32.07 12 4.69 17.7 2.125 15.99 5.8 12.5 8 16.66 1.845 0.50 3.88 5.00 16 14.0 18.00 4 0.81 324TSD 2 30 10.5 3.25 15.8 1.875 15.5 5.75 12.5 8 15.9 1.591 0.50 2 3.50 16 14.0 18.00 4 0.81 324TSD 4,6 30.57 10.5 3.25 17.7 1.875 15.99 5.75 12.5 8 16.66 1.591 0.50 2 3.50 16 14.0 18.00 4 0.81 326TSD 2 30 12 3.25 15.8 1.875 15.5 5.75 12.5 8 15.9 1.591 0.5 2 3.50 16 14.0 18.00 4 0.81 326TSD 4,6 30.57 12 3.25 17.7 1.875 15.99 5.75 12.5 8 16.66 1.591 0.5 2 3.50 16 14.0 18.00 4 0.81 364TD 4,6 34.19 11.25 5.44 17.7 2.375 17.94 6.31 14.0 9 17.81 2.021 0.625 4.25 5.63 16 14.0 18.00 4 0.81 364TD 4,6 35.53 11.25 5.4 19.6 2.375 18.57 6.35 14.0 9 18.48 2.021 0.625 4.25 5.63 16 14.0 18.00 4 0.81 365TD 4,6 34.19 12.25 5.44 17.7 2.375 17.94 6.31 14 9 17.81 2.021 0.625 4.25 5.63 16 14.0 18.00 4 0.81 365TD 4,6 35.53 12.25 5.4 19.6 2.375 18.57 6.35 14 9 18.48 2.021 0.625 4.25 5.63 16 14.0 18.00 4 0.81 364TSD 2 32.06 11.25 3.31 17.7 1.875 17.94 6.31 14 9 17.81 1.591 0.5 2 3.50 16 14.0 18.00 4 0.81 364TSD 4,6 33.4 11.25 3.28 19.6 1.875 18.57 6.35 14 9 18.48 1.591 0.5 2 3.50 16 14.0 18.00 4 0.81 365TSD 2 32.06 12.25 3.31 17.7 1.875 17.94 6.31 14 9 17.81 1.591 0.5 2 3.50 16 14.0 18.00 4 0.81 365TSD 4,6 33.4 12.25 3.28 19.6 1.875 18.57 6.35 14 9 18.48 1.591 0.5 2 3.50 16 14.0 18.00 4 0.81 (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames.

D Flange Foot Mounted, Footless - Frames 400 - S440 Introduction General Purpose Duty Duty Purpose Frame Poles C 2F N-W P U AB BA (1) 2E D O Keyseat D Flange R S ES AH AJ AK BD BF # BF 404TD 39.4 12 6.78 19.6 2.875 18.38 7.1 16 10 19.6 2.45 0.75 5.63 7.00 20 18.0 22.00 4 0.81 405TD 39.4 14 6.78 19.6 2.875 18.38 7.1 16 10 19.6 2.45 0.75 5.63 7.00 20 18.0 22.00 4 0.81 404TSD 36.4 12.25 3.5 19.6 2.125 18.38 7.38 16 10 19.6 1.845 0.50 2.75 4.00 20 18.0 22.00 4 0.81 405TSD 36.4 13.75 3.5 19.6 2.125 18.38 7.38 16 10 19.6 1.845 0.50 2.75 4.00 20 18.0 22.00 4 0.81 444TD 45.58 14.5 8.1 21.8 3.375 19.63 7.9 18 11 21.8 2.880 0.88 6.88 8.25 20 18.0 22.00 8 0.81 445TD 45.58 16.5 8.1 21.8 3.375 19.63 7.9 18 11 21.8 2.880 0.88 6.88 8.25 20 18.0 22.00 8 0.81 444TSD 41.82 14.5 4 21.8 2.375 19.63 8.25 18 11 21.8 2.021 0.63 3.05 4.50 20 18.0 22.00 8 0.81 445TSD 41.82 16.5 4 21.8 2.375 19.63 8.25 18 11 21.8 2.021 0.63 3.05 4.50 20 18.0 22.00 8 0.81 447TD 49 20 8.03 21.8 3.375 19.63 7.96 18 11 22 2.880 0.88 6.88 8.25 20 18.0 22.00 8 0.81 447TSD 45.26 20 4 21.8 2.375 19.63 8.25 18 11 22 2.021 0.63 3.05 4.50 20 18.0 22.00 8 0.81 449TD 54 25 8.03 21.8 3.375 22 7.96 18 11 22 2.880 0.88 6.88 8.25 20 18.0 22.00 8 0.81 449TSD 50.3 25 4 21.8 2.375 22 8.25 18 11 22 2.021 0.63 3.05 4.50 20 18.0 22.00 8 0.81 S449LS 63.6 25 8.67 24.6 3.625 23 7.95 18 11 23.3 3.134 0.88 7.5 8.25 20 18.0 22.00 8 0.81 S449LS ** 66.7 25 8.67 24.6 3.625 23 7.95 18 11 23.3 3.134 0.88 7.5 8.25 20 18.0 22.00 8 0.81 S449SS 59.8 25 4.59 24.6 2.625 23 8.16 18 11 23.3 2.275 0.625 3.5 4.50 20 18.0 22.00 8 0.81 S449SS * 63.2 25 4.59 24.6 2.625 23 8.16 18 11 23.3 2.275 0.625 3.5 4.50 20 18.0 22.00 8 0.81 ** Only for 400HP, 2 Pole ** Only for 300, 350 & 400HP, 4 Pole (1) Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. S449 frame motors are only available with feet All of the above motors have 8 hole footprints except 182 to 286 frames (2 pole only) and S449 frames. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-31 Dimensions

Introduction General Purpose General Purpose, Severe & Duty - TEFC RGZP / RGZESD / RGZZESD Duty Purpose Dimensions Duty Frame S R ES C D E 2F BA N-W O P AB U 143T 0.188 0.77 1.38 12.2 3.50 2.75 4.0 2.25 2.25 6.93 7.7 6.46 0.875 145T 0.188 0.77 1.38 13.3 3.50 2.75 5.0 2.25 2.25 6.93 7.7 6.46 0.875 182T 0.250 0.99 1.75 14.2 4.50 3.75 4.5 2.75 2.75 8.86 9.7 7.36 1.125 184T 0.250 0.99 1.75 15.2 4.50 3.75 5.5 2.75 2.75 8.86 9.7 7.36 1.125 213T 0.313 1.2 2.38 18 5.25 4.25 5.5 3.5 3.38 10.62 11.2 9.02 1.375 215T 0.313 1.2 2.38 19.1 5.25 4.25 7.0 3.5 3.38 10.62 11.2 9.02 1.375 254T 0.375 1.42 2.88 22.3 6.25 5 8.25 4.25 4 12.62 13.4 9.92 1.625 256T 0.375 1.42 2.88 24.1 6.25 5 10 4.25 4 12.62 13.4 9.92 1.625 284T 0.500 1.59 3.25 27.4 7 5.5 9.5 4.75 4.63 14.19 15.5 13.4 1.875 286T 0.500 1.59 3.25 28.9 7 5.5 11 4.75 4.63 14.19 15.5 13.4 1.875 284TS 0.375 1.42 1.88 26 7 5.5 9.5 4.75 3.25 14.19 15.5 13.4 1.625 286TS 0.375 1.42 1.88 27.5 7 5.5 11 4.75 3.25 14.19 15.5 13.4 1.625 324T 0.5 1.85 3.88 32 8 6.25 10.5 5.25 5.25 15.94 17.1 15.75 2.125 326T 0.5 1.85 3.88 32 8 6.25 12 5.25 5.25 15.94 17.1 15.75 2.125 324TS 0.5 1.59 2 30 8 6.25 10.5 5.25 3.75 15.94 17.1 15.75 1.875 326TS 0.5 1.59 2 30 8 6.25 12 5.25 3.75 15.94 17.1 15.75 1.875 364T 0.625 2.02 4.25 34.2 9 7 11.25 5.88 5.88 17.81 18.5 17.69 2.375 365T 0.625 2.02 4.25 34.2 9 7 12.25 5.88 5.88 17.81 18.5 17.69 2.375 364TS 0.5 1.59 2 32.1 9 7 11.25 5.88 3.75 17.81 18.5 17.69 1.875 365TS 0.5 1.59 2 32.1 9 7 12.25 5.88 3.75 17.81 18.5 17.69 1.875 404T 0.75 2.45 5.63 39.5 10 8 12.25 6.625 7.25 19.9 19.6 17.5 2.875 405T 0.75 2.45 5.63 39.5 10 8 13.75 6.625 7.25 19.9 19.6 17.5 2.875 404TS 0.5 1.85 2.75 36.5 10 8 12.25 6.625 4.25 19.9 19.6 17.5 2.125 405TS 0.5 1.85 2.75 36.5 10 8 13.75 6.625 4.25 19.9 19.6 17.5 2.125 444T 0.875 2.88 6.88 45.6 11 9 14.5 7.5 8.5 21.9 21.7 19.94 3.375 445T 0.875 2.88 6.88 45.6 11 9 16.5 7.5 8.5 21.9 21.7 19.94 3.375 444TS 0.625 2.02 3 41.8 11 9 14.5 7.5 4.75 21.9 21.7 19.94 2.375 445TS 0.625 2.02 3 41.8 11 9 16.5 7.5 4.75 21.9 21.7 19.94 2.375 447T 0.875 2.88 6.88 49.1 11 9 20 7.5 8.5 21.9 21.8 19.94 3.375 447TS 0.625 2.02 3 45.4 11 9 20 7.5 4.75 21.9 21.8 19.94 2.375 449T 0.875 2.88 6.88 54.1 11 9 25 7.5 8.5 21.9 21.8 22 3.375 449TS 0.625 2.02 3 50.3 11 9 25 7.5 4.75 21.9 21.8 22 2.375 S449LS 0.875 3.13 7.5 67.1 11 9 25 7.5 9.12 23.4 25.4 23.01 3.625 S449SS 0.625 2.28 3.5 67.1 11 9 25 7.5 5.25 23.4 25.4 23.01 2.625 11-32 2009-2010 Low Voltage AC Selection and Pricing Guide

General Purpose, Severe & Duty - TEFC RGZP / RGZESD / RGZZESD C-Face with & without feet Introduction General Purpose Duty Duty Purpose Frame BD AJ AK U AH BA ES S BF # BF DIA 143/5TC 6.5 5.875 4.5 0.875 2.12 2.25 ** 1.41 0.188 4 3/8"-16NC 182/4TC 9 7.25 8.5 * 1.125 2.62 2.75 ** 1.78 0.25 4 1/2"-13NC 213/5TC 9 7.25 8.5 1.375 3.12 3.5 ** 2.41 0.312 4 1/2"-13NC 254/6TC 10 7.25 8.5 1.625 3.75 4.25 ** 2.91 0.375 4 1/2"-13NC 284/6TC 10.75 9 10.5 1.875 4.38 4.75 3.25 0.5 4 1/2"-13NC 284/6TSC 10.75 9 10.5 1.625 3 4.75 1.88 0.38 4 1/2"-13NC 324/6TC 12.75 11 12.5 2.125 5 5.25 3.88 0.5 4 5/8"-11NC 324/6TSC 12.75 11 12.5 1.875 3.5 5.25 2 0.5 4 5/8"-11NC 364/5TC 12.75 11 12.5 2.375 5.62 5.88 4.25 0.625 8 5/8"-11NC 364/5TSC 12.75 11 12.5 1.875 3.5 5.88 2 0.5 8 5/8"-11NC 404/5TC 13.5 11 12.5 2.875 7 6.625 5.62 0.75 8 5/8"-11NC 404/5TSC 13.5 11 12.5 2.125 4 6.625 2.75 0.5 8 5/8"-11NC 444/5TC 16.62 14 16 3.375 8.25 7.5 6.88 0.875 8 5/8"-11NC 444/5TSC 16.62 14 16 2.375 4.5 7.5 3 0.625 8 5/8"-11NC 447TC 16.62 14 16 3.375 8.25 7.5 6.88 0.875 8 5/8"-11NC 447TSC 16.62 14 16 2.375 4.5 7.5 3 0.625 8 5/8"-11NC 449TC 16.62 14 16 3.375 8.25 7.5 6.88 0.875 8 5/8"-11NC 449TSC 16.62 14 16 2.375 4.5 7.5 3 0.625 8 5/8"-11NC ** Optional 4.5 inch AK (See 143/5TC) is available for 182/4TC. Contact factory if required. ** Not according to NEMA standard. Drip Cover dimension (when used) - max. 3 inches. 2009-2010 Low Voltage AC Selection and Pricing Guide 11-33 Dimensions

Introduction General Purpose Duty RGZESDI / RGZZESDI Figure A Totally Enclosed Fan Cooled Duty Purpose Dimensions Duty Frame XC XD XE C D E 2F BA N-W O P W AB U 143T 0.188 0.188 1.38 12.2 3.5 2.75 4 2.25 2.25 7.2 7.7 0.13 6.7 0.875* 145T 0.188 0.188 1.38 13.7 3.5 2.75 5 2.25 2.25 7.2 7.7 0.13 6.7 0.875* 182T 0.25 0.25 1.8 14.8 4.5 3.75 4.5 2.75 2.75 9 9.4 0.13 8 1.125* 184T 0.25 0.25 1.8 15.8 4.5 3.75 5.5 2.75 2.75 9 9.4 0.13 8 1.125* 213T 0.313 0.313 2.31 18.2 5.25 4.25 5.5 3.5 3.38 10.5 10.8 0.13 9.4 1.375* 215T 0.313 0.313 2.31 19.6 5.25 4.25 7 3.5 3.38 10.5 10.8 0.13 9.4 1.375* 254T 0.375 0.375 2.81 23 6.25 5 8.25 4.25 4 12.6 13.1 0.13 10.7 1.625** 256T 0.375 0.375 2.81 24.8 6.25 5 10 4.25 4 12.6 13.1 0.13 10.7 1.625** 284T 0.5 0.5 3.25 27.4 7 5.5 9.5 4.75 4.63 14.3 14.9 0.13 13.4 1.875** 286T 0.5 0.5 3.25 28.9 7 5.5 11 4.75 4.63 14.3 14.9 0.13 13.4 1.875** 284TS 0.375 0.375 1.88 27.5 7 5.5 9.5 4.75 3.25 14.3 14.9 0.13 13.4 1.625** 286TS 0.375 0.375 1.88 27.5 7 5.5 11 4.75 3.25 14.3 14.9 0.13 13.4 1.625** 324T 0.5 0.5 3.88 31.5 8 6.25 10.5 5.25 5.25 16 16.6 0.13 15.5 2.125** 326T 0.5 0.5 3.88 31.5 8 6.25 12 5.25 5.25 16 16.6 0.13 15.5 2.125** 324TS 0.5 0.5 2 30 8 6.25 10.5 5.25 3.75 16 16.6 0.13 15.5 1.875** 326TS 0.5 0.5 2 30 8 6.25 12 5.25 3.75 16 16.6 0.13 15.5 1.875** 364T 0.625 0.625 4.25 34.2 9 7 11.25 5.88 5.88 17.8 18.4 0.38 18 2.375** 365T 0.625 0.625 4.25 34.2 9 7 12.25 5.88 5.88 17.8 18.4 0.38 18 2.375** 364TS 0.5 0.5 2 32.1 9 7 11.25 5.88 3.75 17.8 18.4 0.38 18 1.875** 365TS 0.5 0.5 2 32.1 9 7 12.25 5.88 3.75 17.8 18.4 0.38 18 1.875** 404T 0.75 0.75 5.63 39.5 10 8 12.25 6.625 7.25 19.9 19.6 0.13 18.7 2.875** 405T 0.75 0.75 5.63 39.5 10 8 13.75 6.625 7.25 19.9 19.6 0.13 18.7 2.875** 404TS 0.5 0.5 2.75 36.5 10 8 12.25 6.625 4.25 19.9 19.6 0.13 18.7 2.125** 405TS 0.5 0.5 2.75 36.5 10 8 13.75 6.625 4.25 19.9 19.6 0.13 18.7 2.125** 444T 0.875 0.875 6.88 45.6 11 9 14.5 7.5 8.5 21.9 21.7 0.13 20 3.375** 445T 0.875 0.875 6.88 45.6 11 9 16.5 7.5 8.5 21.9 21.7 0.13 20 3.375** 444TS 0.625 0.625 3 41.8 11 9 14.5 7.5 4.75 21.9 21.7 0.13 20 2.375** 445TS 0.625 0.625 3 41.8 11 9 16.5 7.5 4.75 21.9 21.7 0.13 20 2.375** 447T 0.875 0.875 6.88 49.1 11 9 20 7.5 8.5 21.9 21.8 0.13 20 3.375 447TS 0.625 0.625 3 45.4 11 9 20 7.5 4.75 21.9 21.8 0.13 20 2.375 449T 0.875 0.875 6.88 54.1 11 9 25 7.5 8.5 21.9 21.8 0.13 20 3.375 449TS 0.625 0.625 3 50.3 11 9 25 7.5 4.75 21.9 21.8 0.13 20 2.375 S449LS 0.875 0.875 7.5 63.7 11 9 25 7.5 9.12 23.4 25.4 0.13 23 3.625 S449SS 0.625 0.625 3.5 59.8 11 9 25 7.5 5.25 23.4 25.4 0.13 23 2.625 ** Tolerance: +0.00, -0.0005 ** Tolerance: +0.00, -0.001 11-34 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty RGZESDI Figure B Totally Enclosed Fan Blower Cooled with or without Encoder Introduction General Purpose Duty Frame XC XD XE C D E 2F BA N-W O P W AB U 143T 0.188 0.188 1.38 12.2 3.5 2.75 4 2.25 2.25 7.2 7.7 0.13 6.7 0.875** 145T 0.188 0.188 1.38 13.7 3.5 2.75 5 2.25 2.25 7.2 7.7 0.13 6.7 0.875** 182T 0.25 0.25 1.8 14.8 4.5 3.75 4.5 2.75 2.75 9 9.4 0.13 8 1.125** 184T 0.25 0.25 1.8 15.8 4.5 3.75 5.5 2.75 2.75 9 9.4 0.13 8 1.125** 213T 0.313 0.313 2.31 18.2 5.25 4.25 5.5 3.5 3.38 10.5 10.8 0.13 9.4 1.375** 215T 0.313 0.313 2.31 19.6 5.25 4.25 7 3.5 3.38 10.5 10.8 0.13 9.4 1.375** 254T 0.375 0.375 2.81 23 6.25 5 8.25 4.25 4 12.6 13.1 0.13 10.7 1.625** 256T 0.375 0.375 2.81 24.8 6.25 5 10 4.25 4 12.6 13.1 0.13 10.7 1.625** 284T 0.5 0.5 3.25 27.4 7 5.5 9.5 4.75 4.63 14.3 14.9 0.13 13.4 1.875** 286T 0.5 0.5 3.25 28.9 7 5.5 11 4.75 4.63 14.3 14.9 0.13 13.4 1.875** 284TS 0.375 0.375 1.88 27.5 7 5.5 9.5 4.75 3.25 14.3 14.9 0.13 13.4 1.625** 286TS 0.375 0.375 1.88 27.5 7 5.5 11 4.75 3.25 14.3 14.9 0.13 13.4 1.625** 324T 0.5 0.5 3.88 31.5 8 6.25 10.5 5.25 5.25 16 16.6 0.13 15.5 2.125** 326T 0.5 0.5 3.88 31.5 8 6.25 12 5.25 5.25 16 16.6 0.13 15.5 2.125** 324TS 0.5 0.5 2 30 8 6.25 10.5 5.25 3.75 16 16.6 0.13 15.5 1.875** 326TS 0.5 0.5 2 30 8 6.25 12 5.25 3.75 16 16.6 0.13 15.5 1.875** 364T 0.625 0.625 4.25 34.2 9 7 11.25 5.88 5.88 17.8 18.4 0.38 18 2.375** 365T 0.625 0.625 4.25 34.2 9 7 12.25 5.88 5.88 17.8 18.4 0.38 18 2.375** 364TS 0.5 0.5 2 32.1 9 7 11.25 5.88 3.75 17.8 18.4 0.38 18 1.875** 365TS 0.5 0.5 2 32.1 9 7 12.25 5.88 3.75 17.8 18.4 0.38 18 1.875** 404T 0.75 0.75 5.63 39.5 10 8 12.25 6.625 7.25 19.9 19.6 0.13 18.7 2.875** 405T 0.75 0.75 5.63 39.5 10 8 13.75 6.625 7.25 19.9 19.6 0.13 18.7 2.875** 404TS 0.5 0.5 2.75 36.5 10 8 12.25 6.625 4.25 19.9 19.6 0.13 18.7 2.125** 405TS 0.5 0.5 2.75 36.5 10 8 13.75 6.625 4.25 19.9 19.6 0.13 18.7 2.125** 444T 0.875 0.875 6.88 45.6 11 9 14.5 7.5 8.5 21.9 21.7 0.13 20 3.375** 445T 0.875 0.875 6.88 45.6 11 9 16.5 7.5 8.5 21.9 21.7 0.13 20 3.375** 444TS 0.625 0.625 3 41.8 11 9 14.5 7.5 4.75 21.9 21.7 0.13 20 2.375** 445TS 0.625 0.625 3 41.8 11 9 16.5 7.5 4.75 21.9 21.7 0.13 20 2.375** 447T 0.875 0.875 6.88 49.1 11 9 20 7.5 8.5 21.9 21.8 0.13 20 3.375 447TS 0.625 0.625 3 45.4 11 9 20 7.5 4.75 21.9 21.8 0.13 20 2.375 449T 0.875 0.875 6.88 54.1 11 9 25 7.5 8.5 21.9 21.8 0.13 20 3.375 449TS 0.625 0.625 3 50.3 11 9 25 7.5 4.75 21.9 21.8 0.13 20 2.375 S449LS 0.875 0.875 7.5 63.7 11 9 25 7.5 9.12 23.4 25.4 0.13 23 3.625 S449SS 0.625 0.625 3.5 59.8 11 9 25 7.5 5.25 23.4 25.4 0.13 23 2.625 ** Tolerance: +0.00, -0.001 2009-2010 Low Voltage AC Selection and Pricing Guide 11-35 Duty Purpose Dimensions

Introduction General Purpose Duty RGZESDI Figure C Motor with Lake Shore SL56 Encoder Duty Duty Frame XC XD XE C D E 2F BA N-W O P W AB U 143T 0.188 0.188 1.38 15.9 3.5 2.75 4 2.25 2.25 7.25 7.5 0.13 6.7, -0.0005 0.875, +0.00 145T 0.188 0.188 1.38 16.9 3.5 2.75 5 2.25 2.25 7.25 7.5 0.13 6.7, -0.0005 0.875, +0.00 182T 0.25 0.25 1.81 18.5 4.5 3.75 4.5 2.75 2.75 9.12 9.3 0.13 8, -0.0005 1.125, +0.00 184T 0.25 0.25 1.81 19.5 4.5 3.75 5.5 2.75 2.75 9.12 9.3 0.13 8, -0.0005 1.125, +0.00 Purpose Duty RGZESDI Figure D Motor with internally Mounted Encoder Dimensions Frame XC XD XE C D E 2F BA N-W O P W AB U 404T 0.75 0.75 5.63 43.66 10 8 12.25 6.625 7.25 19.9 19.6 0.13 18.4, -0.001 2.875, +0.00 405T 0.75 0.75 5.63 43.66 10 8 13.75 6.625 7.25 19.9 19.6 0.13 18.4, -0.001 2.875, +0.00 404TS 0.5 0.5 2.75 40.66 10 8 12.25 6.625 4.25 19.9 19.6 0.13 18.4, -0.001 2.125, +0.00 405TS 0.5 0.5 2.75 40.66 10 8 13.75 6.625 4.25 19.9 19.6 0.13 18.4, -0.001 2.125, +0.00 444T 0.875 0.875 6.88 49.87 11 9 14.5 7.5 8.5 21.9 21.7 0.13 19.6, -0.001 3.375, +0.00 445T 0.875 0.875 6.88 49.87 11 9 16.5 7.5 8.5 21.9 21.7 0.13 19.6, -0.001 3.375, +0.00 444TS 0.625 0.625 3 46.12 11 9 14.5 7.5 4.75 21.9 21.7 0.13 19.6, -0.001 2.375, +0.00 445TS 0.625 0.625 3 46.12 11 9 16.5 7.5 4.75 21.9 21.7 0.13 19.6, -0.001 2.375, +0.00 447T 0.875 0.875 6.88 53.48 11 9 20 7.5 8.5 21.9 21.8 0.13 19.6 3.375 447TS 0.625 0.625 3 49.74 11 9 20 7.5 4.75 21.9 21.8 0.13 19.6 2.375 449T 0.875 0.875 6.88 58.37 11 9 25 7.5 8.5 21.9 21.8 0.13 19.6 3.375 449TS 0.625 0.625 3 54.62 11 9 25 7.5 4.75 21.9 21.8 0.13 19.6 2.375 S449LS 0.875 0.875 7.5 67.82 11 9 25 7.5 9.12 23.4 25.4 0.13 23 3.625 S449SS 0.625 0.625 3.5 63.95 11 9 25 7.5 5.25 23.4 25.4 0.13 23 2.625 11-36 2009-2010 Low Voltage AC Selection and Pricing Guide

Duty RGZESDI Figure E Motor with Dynapar HS35 Encoder Introduction General Purpose Duty Frame XC XD XE C D E 2F BA N-W O P W AB U 143T 0.188 0.188 1.38 15.2 3.5 2.75 4 2.25 2.25 6.93 7.7 0.13 6.7* 0.875*** 145T 0.188 0.188 1.38 16.3 3.5 2.75 5 2.25 2.25 6.93 7.7 0.13 6.7* 0.875*** 182T 0.25 0.25 1.75 17.2 4.5 3.75 4.5 2.75 2.75 8.86 9.7 0.13 8* 1.125*** 184T 0.25 0.25 1.75 18.3 4.5 3.75 5.5 2.75 2.75 8.86 9.7 0.13 8* 1.125*** 213T 0.313 0.313 2.38 20.5 5.25 4.25 5.5 3.5 3.38 10.62 11.2 0.13 9.4* 1.375*** 215T 0.313 0.313 2.38 22.1 5.25 4.25 7 3.5 3.38 10.62 11.2 0.13 9.4* 1.375*** 254T 0.375 0.375 2.88 25.5 6.25 5 8.25 4.25 4 12.36 13.4 0.13 10.6** 1.625*** 256T 0.375 0.375 2.88 27.2 6.25 5 10 4.25 4 12.36 13.4 0.13 10.6** 1.625*** 284T 0.5 0.5 3.25 29.8 7 5.5 9.5 4.75 4.63 14.27 14.9 0.13 13.4** 1.875*** 286T 0.5 0.5 3.25 31.3 7 5.5 11 4.75 4.63 14.27 14.9 0.13 13.4** 1.875*** 284TS 0.375 0.375 1.88 28.3 7 5.5 9.5 4.75 3.25 14.27 14.9 0.13 13.4** 1.625*** 286TS 0.375 0.375 1.88 29.8 7 5.5 11 4.75 3.25 14.27 14.9 0.13 13.4** 1.625*** 324T 0.5 0.5 3.88 32.4 8 6.25 10.5 5.25 5.25 15.9 16.6 0.13 15.5** 2.125*** 326T 0.5 0.5 3.88 32.4 8 6.25 12 5.25 5.25 15.9 16.6 0.13 15.5** 2.125*** 324TS 0.5 0.5 2 31.9 8 6.25 10.5 5.25 3.75 15.9 16.6 0.13 15.5** 1.875*** 326TS 0.5 0.5 2 31.9 8 6.25 12 5.25 3.75 15.9 16.6 0.13 15.5** 1.875*** 364T 0.625 0.625 4.25 36.6 9 7 11.25 5.88 5.88 17.81 18.5 0.26 17.9** 2.375*** 365T 0.625 0.625 4.25 36.6 9 7 12.25 5.88 5.88 17.81 18.5 0.26 17.9** 2.375*** 364TS 0.5 0.5 2 34.5 9 7 11.25 5.88 3.75 17.81 18.5 0.26 17.9** 1.875*** 365TS 0.5 0.5 2 34.5 9 7 12.25 5.88 3.75 17.81 18.5 0.26 17.9** 1.875*** 404T 0.75 0.75 5.63 41.8 10 8 12.25 6.625 7.25 19.62 19.6 0.13 18.6** 2.875*** 405T 0.75 0.75 5.63 41.8 10 8 13.75 6.625 7.25 19.62 19.6 0.13 18.6** 2.875*** 404TS 0.5 0.5 2.75 38.8 10 8 12.25 6.625 4.25 19.62 19.6 0.13 18.6** 2.125*** 405TS 0.5 0.5 2.75 38.8 10 8 13.75 6.625 4.25 19.62 19.6 0.13 18.6** 2.125*** 444T 0.875 0.875 6.88 51.8 11 9 14.5 7.5 8.5 21.88 21.7 0.13 20** 3.375*** 445T 0.875 0.875 6.88 51.8 11 9 16.5 7.5 8.5 21.88 21.7 0.13 20** 3.375*** 444TS 0.625 0.625 3 48 11 9 14.5 7.5 4.75 21.88 21.7 0.13 20** 2.375*** 445TS 0.625 0.625 3 48 11 9 16.5 7.5 4.75 21.88 21.7 0.13 20** 2.375*** 447T 0.875 0.875 6.88 51.4 11 9 20 7.5 8.5 21.88 21.8 0.13 20 3.375 447TS 0.625 0.625 3 47.7 11 9 20 7.5 4.75 21.88 21.8 0.13 20 2.375 449T 0.875 0.875 6.88 56.5 11 9 25 7.5 8.5 21.88 21.8 0.13 20 3.375 449TS 0.625 0.625 3 52.6 11 9 25 7.5 4.75 21.88 21.8 0.13 20 2.375 S449LS 0.875 0.875 7.5 69.4 11 9 25 7.5 9.12 23.4 25.4 0.13 23 3.625 S449SS 0.625 0.625 3.5 65.5 11 9 25 7.5 5.25 23.4 25.4 0.13 23 2.625 *** Tolerance: -0.0005 *** Tolerance: -0.001 *** Tolerance: +0.00 2009-2010 Low Voltage AC Selection and Pricing Guide 11-37 Duty Purpose Dimensions