R 954 C 108, , / 326 HP - PDF Free Download

Crawler Excavator R 94 C Operating Weight: Engine Rating: Bucket Capacity: 8,00 -,700 lb 40 kw / 6 HP.60 -.90 yd³

R 94 C Operating Weight: Engine Output: Bucket Capacity: 8,00 -,700 lb 40 kw / 6 HP.60 -.90 yd³ R 94 C Litronic

Liebherr Diesel Engine Specifically designed for construction equipment Long life expectancy Incline lubrication capability for an up to 0% grade LIDEC-Engine Control Liebherr Diesel Engine Control State-of-the-art technology with common rail injection system Complies with emission standard IIIA / Tier 4 R 94 C Litronic

Performance Liebherr crawler excavators feature state-of-the-art technology and high-quality workmanship. The most important components of the drive system are all produced by Liebherr factories and are perfectly coordinated to each other. The engine developed for the C series, assures an effective power delivery, a high degree of efficiency, long life expectancy and complies with the emission standard IIIA / Tier. High Productivity High digging and break-out forces Regeneration Plus Liebherr Engine Technology Liebherr Diesel Power Emission reduces combustion The R 94 C features high digging and break-out forces due to optimal attachment geometry. The remarkable forces are especially accomplished with the utilization of large-size stick and bucket cylinders. The Regeneration Plus function guarantees faster lowering speed, less pressure loss and more safety. A high productivity is achieved with the optimization and interaction of the functions less pressure lowering, regeneration and load holding in combination with a high hydraulic performance. The 6-cylinder in-line engine, developed for the R 94 C with the new common rail injection assures an effective power output, a high efficiency and a long life expectancy. Already at a low speed range the engine develops a high output and contributes substantially to the economical operation of the entire machine. The new engine generation with optimal performance density assures for a more environment friendly fuel combustion. Higher ignition pressures and the newly designed injection technology guarantee the compliance with the emission standard IIIA / Tier. Heavy-duty undercarriage The combination of high-tensile strength steel plates and steel castings minimize tension Undercarriage sizes for every application are available Multi-function tool carrier The correct digging tool for every material and application A modular quick coupler system designed and manufactured by Liebherr allows for the change-over of mechanical and hydraulic tools in a matter of seconds With Likufix, the change-over of all hydraulic and mechanical tools can be completed from the operator s station R 94 C Litronic

Dependable design Designed with casted bell-housings Features two separate pins Maximum strength even at high forces Long term advantages due to optimal stress-flow design 6 R 94 C Litronic

Reliability The high demand for performance and quality is converted into landmark solutions to achieve the highest level of dependability and availability. Liebherr has 0 years experience in the production of hydraulic excavators and has an unparalleled competence in design and know-how. Technology with a vision Optimized hydraulics Power pack Quality to the last detail Heavy-duty attachments with long-term advantage Robust attachment concept Optimized stress flow External bypass lines at the control valve apply the oil flow to the appropriate attachment functions. The optimal hose routing from the control valve to the attachment substantially increases the dependability of the hydraulic system. The individual components of the drive unit (i.e. construction equipment engine, travel and swing gearboxes, main pumps and hydraulic cylinders), pro duced by sister companies of Liebherr are coordinated to fit each other perfectly. They guarantee maximum dependability as an integral part of the total system which is designed for long life expectancy. The clearly laid out routing of the hydraulic, lubrication and electrical lines assures the highest reliability and performance of the machine. Optimal corrosion protection is achieved with pre-painted and surface treated parts. With the utilization of steel castings at every pivot point, the attachment is consistently able to withstand the most server demands. The swing ring tower is made from one piece, which transfers the forces following the principal of stress flow design - into the undercarriage. For lasting protection against dirt and damage, Liebherr swing rings are sealed and have internal teeth. Bucket linkage Optional sealed linkage bearings Optimal protection for under-water work Increased life expectancy of the attachment Key components made by Liebherr Decades of experience with the development, design and manufacturing of components Engines, hydraulic pumps and motors, swing and travel gearboxes as well as electronic elements from in-house production Manufacturing centers for components in Germany and Switzerland produce according to the latest production methods R 94 C Litronic 7

Hydraulic reservoir stop valve Easy and quick interruption of the oil circuit between hydraulic reservoir and hydraulic system No drainage of fluid necessary for service or repair work on the hydraulic system 8 R 94 C Litronic

Comfort The operator s station is designed with comfort in mind. The standard automatic climate control provides a pleasant working environment during any weather condition. Liebherr crawler excavators are service-friendly: maintenance work is easy and simply accomplished due to well accessible service points. Standard maintenance advantage Easy accessibility Maintenance friendly track components All service points are easily accessible and the R 94 C features a central lubrication point as a standard feature. Daily preventive maintenance can be completed in a short period of time. Top rollers, track rollers and track link pins are lubricated for the life of the excavator. The grease cylinder of the idler tensioner is sealed against dirt. Work place with feel-well character Optimal visibility Well thought-out arrangement Easy operation The operator station s generously-sized windows provide outstanding visibility of the work and surrounding area. Design and arrangement of the seat, controls and displays are perfectly tuned to each other in an ergonomically-integrated concept. The operator s seat has shock-absorbing suspension and is adjustable to the individual preference of each operator. The control consoles and information display are arranged within clear view of the operator and are easy to reach. New joysticks, with reduced operating force, are ergonomically shaped and allow pleasant and fatigue-free work. Easy access Comfortably positioned ascents on both sides provide good accessibility to all service points Ergonomically positioned hand rails ensure secure ascent and descent Additional hand rails guarantee maximum safety Liebherr Operator s station Generously-sized windows allow for optimal visibility Operator s seat is individually adjustable and includes a shock-absorbing cushion Standard automatic climate control Right-side window without vertical center post Lockable storage behind seat R 94 C Litronic 9

Hydrostatic fan drive The new cooling system consists of two hydrostatically driven fans The fan speed is thermostatically-controlled by the temperature of hydraulic fluid, charging air and radiator fluid Accelerated warm-up period Fan uses only the needed power, reducing fuel consumption R 94 C Litronic

Economy The Liebherr crawler excavators maximize productivity. The sensitive excavator controls assure optimal efficiency of excavator hydraulics and electronics. A wide selection of attachments, accessory tools and varied dimension undercarriages provide the correct choice for each application. Top technology for maximum profitability Electronic engine speed sensing control Liebherr Tool Control Outstanding parts available Quick spare parts supply Professional help on-call Extensive service packages This regulating system causes an efficient conversion of the engine output in hydraulic performance which results in better utilization of the available engine power. The result: higher digging forces, shorter cycle times and lower fuel consumption. Immediately after the exchange of a hydraulic tool, the required pressure and oil flow settings are available with the push of a button. Up to combinations with the designated names of the tools can be programmed. No tool changeover system is as simple or time-saving. 80,000 line items are always in stock for the global part requirements. Emergency part orders are shipped within 4 hours. Liebherr s customer service is accessible on a 4/7 basis. Qualified professionals are available around the clock to respond to all questions from part supplies to repair advise. Custom tailored service packages guarantee individually focused technical and logistic attention. Liebherr provides solutions with components from remanufactured repair or rebuild programs for every requirement manufactured to maintain genuine quality. New bucket shape The new L-shape features a longer bottom and a strong waved side cutters Suitable for applications in rocky conditions as well as for loading hard and coarse material Ideal for placing rip-rap on embankments Turbo charger with waste-gate Optimized turbo charger technology Full utilization of the performance potential for power development in lower speed ranges Less wear on the turbine components R 94 C Litronic

Technical Data Engine Rating per ISO 949 6 hp (40 kw) at 800 rpm Model Liebherr D 96 L Type 6 cylinder in-line Bore/Stroke 4.80/.90 in Displacement 64 in Engine operation 4-stroke diesel unit pump system turbo-charged and after-cooled reduced emissions Cooling water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements, automatic dust discharge Fuel tank 9 gal Standard sensor controlled engine idling Electrical system Voltage 4 V Batteries x 70 Ah/ V Starter 4 V/7.8 kw Alternator three phase current 8 V/80 A Hydraulic System Hydraulic pump for attachment and travel drive two Liebherr variable flow, swash plate pumps Max. flow x 9. gpm Max. pressure,07 psi Pump regulation electro-hydraulic with electronic engine speed sensing regulation, pressure compensation, flow compensation, automatic oil flow optimizer Hydraulic pump for swing drive reversible, variable flow, swash plate pump, closed-loop circuit Max. flow 6 gpm Max. pressure,69 psi Hydraulic tank 6 gal Hydraulic system 09 gal Hydraulic oil filter full flow filters in return line with inte grated fine filter area ( µm) Cooling system cooler unit, consisting of radiator for engine coolant with after-cooler core, sandwiched with cooler for hydraulic fluid and fuel with hydro - statically controlled fan drive MODE selection adjustment of machine performance and the hydraulics via a mode selector to match application ECO for economical and environmentally friendly operation POWER for maximum digging power and heavy duty jobs LIFT for lifting FINE for precision work and lifting with sensitive movements RPM adjustment step less adjustment of engine output via rpm at each selected mode Liebherr Tool Control ten pre-adjustable pump flows and pressures for add on tools Hydraulic Controls Power distribution via monoblock control valve with integrated relief and safety valves Flow summation to boom and stick Closed-loop circuit for uppercarriage swing drive Servo circuit Attachment and swing proportional via joystick levers Travel proportional via foot pedals or removable hand levers speed pre-selection Additional functions via joystick push buttons or foot pedals Swing Drive Drive by Liebherr swash plate motor with integrated brake valves Transmission Liebherr compact planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed 0.6 rpm step less Swing torque,698 lbf ft Holding brake wet multi-disc (spring applied, pressure released) Option pedal controlled positioning brake Operator s Cab Cab resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window Operator s seat fully adjustable, shock absorbing suspension, adjustable to operator s weight and size, 6-way adjustable Liebherr seat Joysticks integrated into adjustable consoles Monitoring LCD display with menu-driven current operating data display. Acoustical and optical warning signals. Automatic engine shut-off e.g. engine over heating, low engine oil pressure, low hydraulic fluid level Air conditioning standard air conditioning, combined cooler/heater, additional dust filter in fresh air/recircu lated Noise emission ISO 696 L pa (inside cab) = 77 db(a) 000/4/EC L WA (surround noise) = db(a) Undercarriage Version HD heavy duty S-HD heavy-duty version for extreme and severe application, e.g. quarries Drive Liebherr swash plate motors with integrated brake valves on both sides Transmission Liebherr planetary reduction gears Travel speed HD: low range.0 mph high range.0 mph S-HD: low range.6 mph high range. mph Drawbar pull max. HD: 96,44 lbf S-HD: 4,9 lbf Track components HD: D 7 G, maintenance-free S-HD: D 8 K, maintenance-free Track rollers/carrier rollers HD: / S-HD: 8/ Tracks sealed and greased Track pads HD triple grouser S-HD double grouser Digging locks wet multi-discs (spring applied, pressure released) Attachment Design high strength steel plates with steel castings in high-stress areas Hydraulic cylinders Liebherr cylinders with special seal-system, shock absorbed Pivots sealed, low maintenance Lubrication semi-automatic central lubrication system (except link and tilt geometry) Hydraulic connections pipes and hoses equipped with SAE split-flange connections Bucket standard equipped with 9, lb lifting eye R 94 C Litronic

Dimensions E D A W H C K Q P L U Z N S B V G X HD ft in S-HD ft in A A* 9 8 9 8 C 9 D E 4 4 H 9 6 9 K 4 4 9 L 4 4 P 4 Q 9 S 9 6 9 6 U 7 8 7 6 Z 0 9 N 0 4 0 0 4 0 B 6 6 G 6 6 6 * without grip HD-Undercarriage Stick Goose- Goose- Goose- Goose- Length neck neck neck neck Boom Boom Boom Boom 4 6 0 ft in ft in ft in ft in ft in V 7 8 7 8 7 9 6 6 9 6 * 9 4 W 7 8 8 9 9 6 4 6 4 X 7 8 9 6 4 44 7 48 9 6 9 6 4 44 7 48 9 6 4 44 48 * without bucket S-HD-Undercarriage Stick Goose- Goose- Length neck neck Boom Boom 4 ft in ft in ft in V 7 8 4 4 9 6 W 7 8 9 9 6 X 7 8 9 4 4 8 9 6 9 4 4 8 R 94 C Litronic

Backhoe Attachment with Gooseneck Boom ft m Digging Envelope 0 9 8 7 Stick lengths ft in 7 8 9 6 Max. digging depth ft in 8 Max. reach at ground level ft in 9 7 6 40 4 Max. dump height ft in 4 Max. teeth height ft in 4 6 0 6 4 Digging force SAE lbf/lb,8/,470 46,/46,97 8,89/8,80 Digging force ISO lbf/lb,7/6,879 48,784/48,7 40,690/4,006 Breakout force SAE lbf/lb 60,474/60,407 60,474/60,407 60,474/60,407 Breakout force ISO lbf/lb 70,6/70,7 70,6/70,7 70,6/70,7 Breakout force max. ISO 77,6 lbf/77,60 lb 0-0 - - Operating Weight and Ground Pressure - - -0 - - -4 - -6-7 -8-9 40 9 0 8 7 6 0 4 0m 0ft Operating weight includes basic machine with gooseneck boom, stick 7 8 and bucket. yd. Undercarriage HD Pad width in 0 4 0 Weight lb 8,470 9,70,0 Ground pressure psi 4.8.7.4 Optional: heavy duty counterweight (Heavy duty counterweight increases the operating weight by 4,400 lb and ground pressure by 0.7 psi) Buckets Cutting width in 9 ) 6 ) 67 ) 69 ) 7 ) 7 ) 77 ) Capacity ISO 74 yd.60.60....90. Weight lb 4,900 6,70,00 6,700,800 6,000 7,00 Suitable for material up to a specific weight of with stick 7 8 lb/yd,700,700,700,700,000,000,00 with stick 9 6 lb/yd,700,700,000,000,00,00,00 with stick lb/yd,000,000,00,00,000 ) Medium-duty bucket with Liebherr teeth size (appropriate for materials up to classification, according to VOB, Section C, DIN 800) ) Heavy-duty rock bucket with Esco teeth size 6 (appropriate for materials above classification 6, according to VOB, Section C, DIN 800) 4 R 94 C Litronic

Lift Capacities with Gooseneck Boom Stick 7 8 HD Stick 9 6 HD HD,87x (,87x) HD 8,78x (8,78x) 6,887x (6,887x),4x (,4x) HD,96x (,96x),4x (,4x) 4,84x (4,84x) 9,7 (0,8x),9 (6,9x) HD,4x (,4x) 9,09x (9,09x) 4,04 (7,6x) HD 40,8 (4,6x) 6,4 (9,86x) 8,409 (,0x),94 (9,90x) HD 9,7x (9,7x) 7,09 (7,448x) 8,607 (,804x),6 (8,69x) HD 7,80 (4,900x) 4,9 (,x) 7,40 (,96x),677 (,0x) HD 8,8 (47,444x) 4,74 (,9x) 7,06 (4,40x),88 (0,x) 6,66 (0,77x),49 (,60x) 6,44 (7,07x),6 (0,878 ),0x (,0x) 6,487 (0,464x),7 (4,767x) 6,6 (6,79x),07 (0,679 ) HD 8,47x (8,47x) 6, (49,8x),70 (,69x) 6,094 (7,49x) HD,7x (,7x) 6,068 (0,x), (,60x),89 (7,007x),77 (0,9 ) HD,9x (,9x) 7,08 (4,8x),994 (,6x) 6,9 (,48x) HD 47,444x (47,444x) 6,464 (47,x),7 (4,9x),89 (6,08x) HD,6x (,6x) 8,00x (8,00x) 4,008 (8,9x) HD 9,94x (9,94x) 7,89 (4,9x),7 (0,40x) 4,9x (4,9x) 0,07x (0,07x) HD HD HD HD Stick HD HD HD HD HD HD HD HD 9,48x ( 9,48x),470x (,470x) 6,04x (6,04x) 4, (4,9x) 7,84x ( 7,84x) 47,840x (47,840x),76x (,76x),678x (,678x) 9,09 (9,4x),4 (6,667x) 9,678 (,670x) 7,0x (7,0x) 40,477 (4,69x),74 (8,947x) 7,67 (,67x),6 (8,47x) 9, (,9x),0x (,0x) 7,68 (48,48x),64 (,87x) 6,446 (4,78x),97 (9,996x) 8,88 (,067x) 8,947x (8,947x) 6,068 (0,4x), (4,9x),67 (6,7x),44 (0,084 ) 8,84x (8,84x),869 (49,9x),4 (,009x),44 (6,4x), (9,90 ),x (,x) 6,487 (4,7x),77 (,78x),4 (4,60x),04x (,04x) 7,67x (7,67x),47 (7,0x) HD HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, triple grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (. yd ), the lift capacities will increase by, lb, without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. R 94 C Litronic

Backhoe Attachment with Gooseneck Boom 4 ft 40 0 0 m 9 8 7 6 4 Digging Envelope Stick lengths ft in 7 8 9 6 Max. digging depth ft in 4 6 9 9 8 Max. reach at ground level ft in 9 40 8 4 7 Max. dump height ft in 6 9 7 9 9 4 Max. teeth height ft in 8 4 9 4 4 Digging force SAE lbf/lb,8/,470 46,/46,97 8,89/8,80 Digging force ISO lbf/lb,7/6,879 48,784/48,7 40,690/4,006 Breakout force SAE lbf/lb 60,474/60,407 60,474/60,407 60,474/60,407 Breakout force ISO lbf/lb 70,6/70,7 70,6/70,7 70,6/70,7 Breakout force max. ISO 77,6 lbf/77,60 lb 0-0 - - Operating Weight and Ground Pressure - - -0 - -0 - -4 - -6-7 -8-9 - 4 4 40 9 0 8 7 6 0 4 0m 0ft Operating weight includes basic machine with gooseneck boom 4 stick 9 6 and bucket.60 yd. Undercarriage HD Pad width in 0 4 0 Weight lb 9,0,0,00 Ground pressure psi 4.9..4 Optional: heavy duty counterweight (Heavy duty counterweight increases the operating weight by 4,400 lb and ground pressure by 0.7 psi) Buckets Cutting width in ) ) 9 ) 6 ) 67 ) 69 ) 7 ) 7 ) Capacity ISO 74 yd...60.60...0.90 Weight lb 4,60,00 4,960 6,70,00 6,700,80 6,070 Suitable for material up to a specific weight of with stick 7 8 lb/yd,700,000,000,000,00,000 with stick 9 6 lb/yd,700,700,000,000,00,00,000 with stick lb/yd,000,000,00,00,000 ) Medium-duty bucket with Liebherr teeth size (appropriate for materials up to classification, according to VOB, Section C, DIN 800) ) Heavy-duty rock bucket with Esco teeth size 6 (appropriate for materials above classification 6, according to VOB, Section C, DIN 800) 6 R 94 C Litronic

Lift Capacities with Gooseneck Boom 4 Stick 7 8 HD Stick 9 6 HD 6,60x (6,60x) HD 7,74x (7,74x),99x (,99x) HD 4,79x (4,79x) 8,6x (8,6x) 4,08 (6,777x) 7,8x (7,8x) 4,46 (,44x) HD 8,779x (8,779x) 6,0x (6,0x) 8,80 (0,86x),8 (7,87x) HD 4,60x (4,60x) 4,07x (4,07x) 9,6 (9,4x),669 (6,689x) 9,8 (,80x) HD 4,8 (0,6x) 7,06 (,9x),7 (9,6x) HD 8,748x (8,748x) 4,9 (8,84x) 7,7 (,98x),74 (8,44x) 9,9 (,89x) HD, (,488x) 6,00 (,089x),97 (0,60x) HD 0,49x (0,49x),69 (,0x) 6,8 (4,4x),97 (9,467x) 8,99 (,807 ),0x (,0x),9 (4,44x),6 (6,x),464 (0,06 ) 7,x (7,x),8 (,99x),90 (,x),88 (9,908 ) 8,98 (,4 ) HD,948x (,948x) 4,9 (4,64x),64 (,7x) 4,947 (6,07x),66 (9,84 ) HD,49x (,49x),86 (8,7x) 0,966 (,9x) 4,77 (,904x),979 (9, ) HD 4,94x (4,94x),64 (40,67x),9 (,6x),4 (4,66x),08 (9,4x) HD,67x (,67x) 4,480 (4,078x),098 (,86x) 4,77 (,000x),0 (9,99 ) HD 44,x (44,x) 4,899x (4,899x),99 (7,8x),89 (,04x) HD 49,494x (49,494x),60 (7,90x),78 (9,0x),90 (,x),7x (,7x) 9,4x (9,4x) 8,7x (8,7x) 9,674x (9,674x),70x (,70x) HD HD HD HD Stick HD HD HD HD HD HD HD HD HD,670x (,670x),00x (,00x) 6,967x ( 6,967x),404x (,404x),494 (,97x) 6,998x (6,998x),977 (4,8x),0 (,448x) 7,897x (7,897x),640x (,640x) 8,0 (9,80x),96 (6,49x) 9,46 (4,96x) 0,8x (0,8x), (9,98x) 6, (,4x),0 (8,0x) 8,86 (,66x),04x (,04x) 9,x (9,x),760 (,76x), (4,8x), (9,79x) 8,78 (,4 ) 9,7x (9,7x), (4,899x) 0,878 (,797x) 4,7 (,97x),74 (9,90 ) 8,09 (4,9 ) 8,86x (8,86x),687 (44,40x) 0,67 (,46x) 4,08 (,87x),6 (9,09 ) 8,069 (4,90 ) 9,64x (9,64x) 4,46 (4,9x) 0,966 (,09x) 4,46 (,744x),74 (8,4x) 0,089x (0,089x),47x (,47x),804 (6,6x),46 (0,06x) 4,84x (4,84x) 8,0x (8,0x) HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, triple grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (.60 yd ), the lift capacities will increase by 4,960 lb, without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. R 94 C Litronic 7

Backhoe Attachment with Gooseneck Boom 6 ft 0 4 40 0 0 0 - - - -0 - m 6 4 9 8 7 6 4 0 - - - -4 - -6-7 -8 0 4 4 40 9 0 8 7 6 0 4 0m 0ft Digging Envelope Stick lengths ft in 7 8 9 6 Max. digging depth ft in 0 4 Max. reach at ground level ft in 40 8 4 6 4 Max. dump height ft in 4 9 7 Max. teeth height ft in 4 46 49 4 Digging force SAE lbf/lb,8/,470 46,/46,97 8,89/8,80 Digging force ISO lbf/lb,7/6,879 48,784/48,7 40,690/4,006 Breakout force SAE lbf/lb 60,474/60,407 60,474/60,407 60,474/60,407 Breakout force ISO lbf/lb 70,6/70,7 70,6/70,7 70,6/70,7 Breakout force max. ISO 77,6 lbf/77,60 lb Operating Weight and Ground Pressure Operating weight includes basic machine with gooseneck boom 6, stick 9 6 and bucket.60 yd. Undercarriage HD Pad width in 0 4 0 Weight lb,0,0 4,00 Ground pressure psi.08.66.8 Optional: heavy duty counterweight (Heavy duty counterweight increases the operating weight by 4,400 lb and ground pressure by 0.7 psi) Buckets Cutting width in ) ) 9 ) 6 ) 67 ) Capacity ISO 74 yd...60.60. Weight lb 4,60, 4,960 6,70, Suitable for material up to a specific weight of with stick 7 8 lb/yd,700,000,000,000,00 with stick 9 6 lb/yd,700,000,000,00,000 with stick lb/yd,000,00,00,000 ) Medium-duty bucket with Liebherr teeth size (appropriate for materials up to classification, according to VOB, Section C, DIN 800) ) Heavy-duty rock bucket with Esco teeth size 6 (appropriate for materials above classification 6, according to VOB, Section C, DIN 800) 8 R 94 C Litronic

Lift Capacities with Gooseneck Boom 6 Stick 7 8 Stick 9 6 HD,0x (,0x) HD 4,79x (4,79x),948x (,948x),0 (,090x) 9,9x (9,9x),8x (,8x) HD 7,49x (7,49x) 0,4 (,x) 4,04 (9,44x) HD,x (,x) 0,790 (,9x) 4,86 (8,4x) 40,609x (40,609x) 8,07 (9,60x) 9,8 (,64x),4 (9,798x) 9,9x (9,9x) 7,74x (7,74x) 8,04x (8,04x) 9, (,x),647 (8,960x) 9,64 (,78x) HD,0 (,4x) 7,7 (4,9x),6 (0,7x) 9,9 (6,8) HD 40,4 (44,74x),904 (,09x) 7,87 (,986x),76 (9,64x) 9, (6,60 ) HD,046 (,9x),99 (,794x),77 (0,48 ) 8,774 (,67) HD,796 (,90x) 6,8 (,99x),79 (0,94x) 8,686 (,609 ) HD 0,49 (,46x) 4,749 (,77x),0 (9,66 ) 8,78 (,6) HD 0,70 (,98x) 4,87 (,96x),97 (9,6 ) 8, (, ) 9,84 (0,600x) 4,088 (4,60x),8 (9,8 ) 8,7 (,06),6x (,6x) 9,798 (,8x),999 (4,846x),84 (8,98 ) 7,89 (4,749 ) HD 6,874x (6,874x) 9,974 (6,676x),9 (,046x),40 (7,0x) HD 7,646x (7,646x) 9,64 (8,06x),69 (,840x),4 (8,06x) 7,86 (,77x) HD,67x (,67x) 0, (,4x) 4,4 (8,06x),77 (,84x) HD 6,88x (6,88x) 0,08 (,744x),8 (9,40x), (,x) HD 4,x (4,x),949x (,949x) HD 8,76x (8,76x) 7,6x (7,6x) 4,4x (4,4x) 9,8x ( 9,8x) HD HD HD HD Stick HD HD HD HD HD HD HD HD 8,708x ( 8,708x) 4,76x (4,76x) 9,07x ( 9,07x),x (,x),69x (,69x),4x (,4x) 6,6x (6,6x) 4,77 (,76x),9 (,09x) 9,7x (9,7x) 9,687x (9,687x) 4,04 (7,49x) 9,877 (,6x) 40,04x (40,04x) 7,49 (8,94x) 8,6 (,77x),07 (8,4x) 9,48 (,6x) 6,70 ( 9,0x) 9,740x (9,740x) 4,8 (,68x) 6,7 (4,008x),0 (9,90x) 8,708 (,6 ) 6,6 (,99 ) 6,08x (6,08x),6 (,90x),68 (,0x),04 (9,7 ) 8, (,0 ),9 (,66 ) 8,409x (8,409x) 0,08 (,9x) 4,066 (,0x),96 (8,96 ) 7,60 (4,8 ),74 (,44 ),404x (,404x),4x (,4x) 9,4 (0,7x),470 (,788x) 9,8 (8,4 ) 7,408 (4,4 ),09x (,09x),88 (,400x) 9,44 (6,896x),8 (,x) 9,744 (6,6x) 7,408 (,46x),x (,x) 9,9 (,4x),6 (7,0x),009 (,96x) 7,87 ( 7,89x),867x (,867x),8x (,8x) 6,48x (6,48x) HD HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, triple grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (.60 yd ), the lift capacities will increase by 4,960 lb, without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. R 94 C Litronic 9

Backhoe Attachment with Gooseneck Boom 0 and Heavy Duty Counterweight ft 0 4 40 0 0 0 - - - -0 - -0 - -40 m 4 9 8 7 6 4 0 - - - -4 - -6-7 -8-9 - - - 7 6 4 9 8 7 6 4 0m Digging Envelope * Stick lengths ft in 9 6 6 Max. digging depth ft in 8 4 7 8 Max. reach at ground level ft in 46 49 Max. dump height ft in 6 Max. teeth height ft in 4 44 9 46 Digging force SAE lbf/lb 46,/46,97 8,89/8,80,97/,68 Digging force ISO lbf/lb 48,784/48,7 40,690/4,006,7/,7 Breakout force SAE lbf/lb 60,474/60,407 60,474/60,407 47,4/47,99 Breakout force ISO lbf/lb 70,6/70,7 70,6/70,7,0/, * with bucket R 944 C Operating Weight and Ground Pressure Operating weight includes basic machine with gooseneck boom 0, stick and bucket. yd. Undercarriage HD Pad width in 0 4 0 Weight lb,080 6,80 9,60 Ground pressure psi.6..8 0 4 40 0 0 0ft Buckets Cutting width in ) 9 ) 67 ) 47 ) ) 69 ) 6 ) Capacity ISO 74 yd..60.00.60.9.0.60 Weight lb 4,60 4,960,00,980,00,40,700 Suitable for material up to a specific weight of with stick 9 6 lb/yd,000,00,000 with stick lb/yd,000,000 with stick 6 lb/yd,700,000,000,00 ) Medium-duty bucket with Liebherr teeth size (appropriate for materials up to classification, according to VOB, Section C, DIN 800) ) Medium-duty bucket from R 944 C litronic` with teeth size 0 0 R 94 C Litronic

Lift Capacities with Gooseneck Boom 0 and Heavy Duty Counterweight Stick 9 6 Stick HD HD 7,97x ( 7,97x),494x (,494x) 8,99x ( 8,99x) HD,707x (,707x),8x (,8x) HD 9,04x ( 9,04x) 8,88 ( 8,97x) 9,476x (9,476x) 9,x (9,x),6x (,6x),87x (,87x),40 (,44x) 8, (,0x),44x (,44x),0x (,0x) 8, ( 9,04x) HD 4,6x (4,6x) 7,7x (7,7x) 4,64 (4,08x),69 (,80x) 7,98 (,067x) HD 0,966x (0,966x),697x (,697x),787x (,787x),869 (,00x) 8,047 ( 9,8x) HD 0,988x (0,988x) 7,40 (0,8x),0 (,807x) 9,94 (,8x) 7,6 (,96x) HD 4,78 (,x) 7,990 (8,0x),60 (4,48x),0 (,07x) 7,40 (,6x),6 (6,680x) HD 7,0x (7,0x),807 (,98x),09 (7,086x) 9,04 (4,066x) 7,87 (,x) HD,89 (7,09x) 6,70 (0,x),6 (,97x) 9,8 (,0x) 7,0 (,x),9 (7,7x),076 (,89x),06 (,97x),98 (7,968x) 8,88 (4,70x) 6,900 (,44x),64 (6,786x),68 (,04x),76 (7,064x) 8,686 (,867x) 6,680 (,68x) HD 4,08x (4,08x),86 (0,09x) 4,749 (,9x),067 (8,4x) 8,76 (4,969x) 6,8 (,44x) HD,78x (,78x) 0,84 (0,44x) 4,9 (,774x),869 (7,769x) 8, (4,96x) 6,48 (,99x) HD,7x (,7x) 8,484x (8,484x),9 (8,88x) 4,87 (,708x),0 (8,44x) 8,76 (4,77x) HD 7,49x (7,49x) 4,9x (4,9x) 0,944 (9,76x) 4,440 (,7x),648 (7,94x) 8, (4,,06x) 6,9 (,86x) HD,87x (,87x),7x (,7x),79 (6,874x),4 (,407x), (7,x) 8,99 (,60x) HD,77x (,77x),89x (,89x),6 (8,07x) 4,67 (,980x),77 (7,47x) 8,4 (,977x) 7,46x (7,46x) 9,60x (9,60x),9 (,766x) 6,006 (9,004x),07 (4,90x),009x (,009x),687x (,687x),4 (,88x),46 (0,60x), (6,006x) 8,7 (,46x) HD,7x (,7x) 8,69x (8,69x) 4,48x (4,48x) HD 8,096x (8,096x) 8,97x (8,97x),94x (,94x) 6,094 (7,8x), (,87x) 9,709x (9,709x),4x (,4x) HD HD Stick 6 HD HD HD HD HD HD HD HD HD 8,86x ( 8,86x) 9,06x ( 9,06x) 4,740x ( 4,740x),6x (,6x) 9,46x ( 9,46x) 7,694 ( 8,x),76x (,76x),44x (,44x) 9,7 (,x) 7,408 ( 9,64x) 7,87x (7,87x) 4,074x (4,074x) 7,990x (7,990x) 4,9x (4,9x),89 (,478x) 9,49 (,067x) 7,077 (,9x),74x (,74x),684 (8,6x) 8,78 (0,67x) 4,4 (6,8x),0 (,669x) 8,98 (,88x) 6,74 (,648x),677x (,677x),8 (0,909x) 7,7 (,708x),8 (7,8x),8 (4,77x) 8, (,6x) 6,4 (,089x),009x (,009x) 7,0x (7,0x),884 (,6x) 6,469 (4,008x), (8,894x) 9,789 (,x) 7,760 (,40x) 6,7 (, ),984x (,984x),840x (,840x),7 (,0x) 6,08 (4,60x), (9,467x) 9,480 (,99x) 7,6 (,8x) 6,7 ( 8,0x),79x (,79x) 9,696x (9,696x),686 (,48x),96 (4,9x),0 (9,4x) 9,9 (,87x) 7,6 (,8x) 9,4x (9,4x) 7,6 (8,40x),7 (9,89x) 6,04 (,8x),70 (8,6x) 9,68 (,x) 7,47x (7,47x),6x (,6x),986 (6,874x) 6,799 (,4x),677 (6,799x),4 (,98x) 9,88x (9,88x) 8,704x (8,704x),090x (,090x) 7,74x (7,74x),677x (,677x) HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, triple grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb/46,97 lb*. Without bucket (. yd /.00 yd *), the lift capacities will increase by 4,60 lb/,00 lb*, without bucket cylinder, link and lever they increase by an additional,60 lb/,0 lb*. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. * only for stick 6 R 94 C Litronic

Backhoe Attachment with Gooseneck Boom HD ft m Digging Envelope 0 9 8 7 Stick lengths ft in 7 8 9 6 Max. digging depth ft in 9 4 7 Max. reach at ground level ft in 9 7 Max. dump height ft in 7 4 Max. teeth height ft in 4 9 9 0 6 4 Digging force SAE lbf/lb,8/,470 46,/46,97 Digging force ISO lbf/lb,7/6,879 48,784/48,7 Breakout force SAE lbf/lb 60,474/60,407 60,474/60,407 Breakout force ISO lbf/lb 70,6/70,7 70,6/70,7 Breakout force max. ISO 77,6 lbf/77,60 lb 0-0 - - Operating Weight and Ground Pressure - - -0 - - -4 - -6-7 -8-9 40 9 0 8 7 6 0 4 0m 0ft Operating weight includes basic machine with gooseneck boom HD, stick HD 7 8 and bucket.60 yd. Undercarriage S-HD Pad width in 0 4 0 Weight lb,00, 460 4,60 Ground pressure psi 6.78 4.08. Optional: heavy duty counterweight (Heavy duty counterweight increases the operating weight by 4,400 lb and ground pressure by 0.7 psi) Buckets Cutting width in ) 6 ) 69 ) 77 ) Capacity ISO 74 yd..60..0 Weight lb,00 6,70 6,70 7,80 Suitable for material up to a specific weight of with stick 7 8 lb/yd,700,700,700,000 with stick 9 6 lb/yd,700,700,000,00 ) Heavy-duty rock bucket with Esco teeth size 6 (appropriate for materials above classification 6, according to VOB, Section C, DIN 800) R 94 C Litronic

Lift Capacities with Gooseneck Boom HD Stick 7 8 40 S-HD S-HD 0 S-HD Stick 9 6 40 S-HD S-HD 0 S-HD S-HD 6,6x (6,6x) S-HD 0 S-HD 7,7x (7,7x) 0 S-HD,76x (,76x),6x (,6x) S-HD 0,0x (0,0x),8x (,8x),4x (,4x) 9,x (9,x) 4,749 (7,47x) S-HD,x (,x) 7,880x (7,880x) 4,88 (6,006x) S-HD 4,447x (4,447x) 8,0 (8,04x) 9,467 (,96x),999 (8,607x) S-HD 7,76x (7,76x) 6,0x (6,0x) 9,709 (0,48x) 4,04 (7,94x) S-HD 9,49 (46,49x),66 (,7x) 8, (4,097x),7 (9,7x) S-HD 40,6 (4,08x) 6, (0,x) 8, (,98x),06 (8,80x) 0 S-HD,4x (,4x) 8,8 (48,7x) 4,7 (,66x) 7,8 (,46x),787 (0,4x) 0 S-HD,8x (,8x) 8,7 (47,9x) 4,449 (,87x) 7, (4,74x),88 (9,798x) S-HD 8,074x (8,074x) 8,7 (46,76x),876 (,7x) 6,84 (,68x) S-HD,400x (,400x) 8,0 (47,60x),7 (,66x) 6,60 (,7x),80 (9,90x) S-HD 4,498x (4,498x) 9,088 (4,880x) 4,8 (,68x) 7,086 (,876x) S-HD 46,78x (46,78x) 8, (44,798x),744 (,40x) 6,79 (4,449x) S-HD 49,9x (49,9x),77x (,77x), (6,67x) S-HD 6,8x (6,8x) 8,96x (8,96x) 4, (8,06x) 0 S-HD 0 S-HD 9,x (9,x) 7,866x (7,866x) S-HD S-HD 0 S-HD 0 S-HD S-HD S-HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, double grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (.60 yd ), the lift capacities will increase by 6,70 lb without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. R 94 C Litronic

Backhoe Attachment with Gooseneck Boom HD 4 ft 40 0 0 m 9 8 7 6 4 Digging Envelope Stick lengths ft in 7 8 9 6 Max. digging depth ft in 4 7 6 Max. reach at ground level ft in 8 40 8 Max. dump height ft in 7 8 Max. teeth height ft in 8 8 9 8 Digging force SAE lbf/lb,8/,470 46,/46,97 Digging force ISO lbf/lb,7/6,879 48,784/48,7 Breakout force SAE lbf/lb 60,474/60,407 60,474/60,407 Breakout force ISO lbf/lb 70,6/70,7 70,6/70,7 Breakout force max. ISO 77,6 lbf/77,60 lb 0-0 - - Operating Weight and Ground Pressure - - -0 - -0 - -4 - -6-7 -8-9 - 4 4 40 9 0 8 7 6 0 4 0m 0ft Operating weight includes basic machine with gooseneck boom HD 4, stick HD 7 8 and bucket.60 yd. Undercarriage S-HD Pad width in 0 4 0 Weight lb,0,70,660 Ground pressure psi 6.9 4..66 Optional: heavy duty counterweight (Heavy duty counterweight increases the operating weight by 4,400 lb and ground pressure by 0.7 psi) Buckets Cutting width in ) 6 ) 69 ) Capacity ISO 74 yd..60. Weight lb,00 6,70 6,70 Suitable for material up to a specific weight of with stick 7 8 lb/yd,700,000,000 with stick 9 6 lb/yd,700,000,00 ) Heavy-duty rock bucket with Esco teeth size 6 (appropriate for materials above classification 6, according to VOB, Section C, DIN 800) 4 R 94 C Litronic

Lift Capacities with Gooseneck Boom HD 4 Stick 7 8 40 S-HD S-HD 0 S-HD Stick 9 6 40 S-HD S-HD 0 S-HD S-HD,x (,x),7x (,7x) S-HD,0x (,0x) 0 S-HD 6,9x (6,9x) 4,77 (4,99x) 0 S-HD,44x (,44x),7x (,7x) 7,76x ( 7,76x) S-HD 6,046x (6,046x) 4,x (4,x) 8,960x (8,960x),84 (6,08x) S-HD,0x (,0x),89x (,89x) 7,9x (7,9x),977 (4,90x) 9,899 (,94x) S-HD 4,94 (8,x) 7,70 (,0x),8 (7,8x) 9,70 (,7x) S-HD 8,947x (8,947x),794 (6,00x) 7,990 (9,90x),99 (6,48x) 9,48 (,977x) S-HD,686 (0,7x) 6,48 (,840x),99 (8,4x) 8,9 (,x) S-HD 0,900x (0,900x), (9,696x) 6,40 (,98x),97 (7,48x) 8,796 (4,67x) 0 S-HD 6,x (6,x),67 (,70x),66 (,766x),40 (8,87x) 0 S-HD 7,6x (7,6x),804 (,9x),44 (,x),66 (8,98x) 8,4 (4,947x) S-HD,78x (,78x),8 (4,08x),49 (0,887x),06 (,64x),99 (8,607x) S-HD,97x (,97x) 4,8 (7,6x),9 (,9x) 4,8 (,0x),89 (8,4x) S-HD 40,8x (40,8x) 6,66 (7,47x),96 (8,748x),4 (,4x),486 (7,064x) S-HD 4,679x (4,679x),6 (9,77x),49 (9,86x) 4,8 (,69x),97 (7,0x) S-HD 40,477x (40,477x),769x (,769x),90 (4,76x) 6,07 (8,78x) S-HD 47,4x (47,4x) 4,7x (4,7x),67 (6,0x),66 (0,040x) 0 S-HD,44x (,44x) 6,976x (6,976x) 0 S-HD 4,987x (4,987x) 6,64x (6,64x) 0,94x (0,94x) S-HD S-HD 0 S-HD 0 S-HD S-HD S-HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, double grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (.60 yd ), the lift capacities will increase by 6,70 lb without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. R 94 C Litronic

Lift Capacities with Gooseneck Boom and Heavy Counterweight Stick 7 8 HD Stick 9 6 HD HD,87x (,87x) HD 8,78x (8,78x) 6,887x (6,887x),4x (,4x) HD,96x (,96x),4x (,4x) 4,84x (4,84x) 0,8x (0,8x) 6,08 (6,9x) HD,4x (,4x) 9,09x (9,09x) 6,8 (7,6x) HD 4,6x (4,6x) 9,86x (9,86x),0 (,0x),88 (9,90x) HD 9,7x (9,7x) 7,448x (7,448x), (,804x),4 (8,69x) HD 4,7 (4,900x) 7,844 (,x) 9,864 (,96x) 4,77 (,0x) HD 4,60 (47,444x) 8,9 (,9x) 9,90 (4,40x) 4,68 (0,x) 4, (0,77x) 6,6 (,60x) 9,048 (7,07x) 4,0 (,804x),0x (,0x) 4,76 (0,464x) 6,70 (4,767x) 8,98 (6,79x) 4, (,86x) HD 8,47x (8,47x) 4,79 (49,8x) 6, (,69x) 8,77 (7,49x) HD,7x (,7x) 4,7 (0,x) 6,09 (,60x) 8,4 (7,007x),867 (,4x) HD,9x (,9x) 4,07 (4,8x) 6,00 (,6x) 8,98 (,48x) HD 47,444x (47,444x) 4,74 (47,x) 6,08 (4,9x) 8,4 (6,08x) HD,6x (,6x) 8,00x (8,00x) 7,4 (8,9x) HD 9,94x (9,94x) 4,9x (4,9x) 6,74 (0,40x) 4,9x (4,9x) 0,07x (0,07x) HD HD HD HD Stick HD HD HD HD HD HD HD HD 9,48x ( 9,48x),470x (,470x) 6,04x (6,04x) 4,9x (4,9x) 7,84x ( 7,84x) 47,840x (47,840x),76x (,76x),678x (,678x) 9,4x (9,4x),609 (6,667x),670x (,670x) 7,0x (7,0x) 4,69x (4,69x) 8,947x (8,947x) 0,60 (,67x) 4,749 (8,47x),97 (,9x),0x (,0x) 4,67 (48,48x) 7,9 (,87x) 9,070 (4,78x) 4,0 (9,996x),8 (,067x) 8,947x (8,947x) 4,7 (0,4x) 6,07 (4,9x) 8,98 (6,7x),8 (0,86x) 8,84x (8,84x) 4,8 (49,9x),640 (,009x) 7,968 (6,4x),404 (0,69x),x (,x) 4,76 (4,7x),88 (,78x) 8,66 (4,60x),04x (,04x) 7,67x (7,67x) 6,8 (7,0x) HD HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, triple grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (. yd ), the lift capacities will increase by, lb, without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. 6 R 94 C Litronic

Lift Capacities with Gooseneck Boom 4 and Heavy Counterweight Stick 7 8 HD Stick 9 6 HD 6,60x (6,60x) HD 7,74x (7,74x),99x (,99x) HD 4,79x (4,79x) 8,6x (8,6x) 6,40 (6,777x) 7,8x (7,8x),44x (,44x) HD 8,779x (8,779x) 6,0x (6,0x) 0,86x (0,86x),67 (7,87x) HD 4,60x (4,60x) 4,07x (4,07x) 9,4x (9,4x),76 (6,689x),96 (,80x) HD 7,690 (0,6x) 9,90 (,9x) 4,8 (9,6x) HD 8,748x (8,748x) 8,48 (8,84x) 0, (,98x) 4,89 (8,44x), (,89x) HD,78 (,488x) 8,67 (,089x) 4,066 (0,60x) HD 0,49x (0,49x) 6, (,0x) 8,76 (4,4x) 4,0 (9,467x),670 (6,x),0x (,0x) 4,84 (4,44x) 7,880 (6,x),8 (0,900x) 7,x (7,x) 4,890 (,99x) 7,8 (,x),404 (0,7x),40 (6,86x) HD,948x (,948x) 9,68 (4,64x) 4,670 (,7x) 7,7 (6,07x),60 (0,7x) HD,49x (,49x) 8,7x (8,7x) 4,47 (,9x) 7,0 (,904x),07 (0,47x) HD 4,94x (4,94x) 40,4 (40,67x),0 (,6x) 7,747 (4,66x),60 (9,4x) HD,67x (,67x) 9,749 (4,078x) 4,604 (,86x) 7,0 (,000x),8 (9,6x) HD 44,x (44,x) 4,899x (4,899x),904 (7,8x) 8,4 (,04x) HD 49,494x (49,494x) 7,90x (7,90x),4 (9,0x) 7,8 (,x),7x (,7x) 9,4x (9,4x) 8,7x (8,7x) 9,674x (9,674x),70x (,70x) HD HD HD HD Stick HD HD HD HD HD HD HD HD HD,670x (,670x),00x (,00x) 6,967x ( 6,967x),404x (,404x),97x (,97x) 6,998x (6,998x) 4,8x (4,8x),77 (,448x) 7,897x (7,897x),640x (,640x) 9,80x (9,80x),080 (6,49x),77 (4,96x) 0,8x (0,8x) 7,09 (9,98x) 9,6 (,4x) 4, (8,0x),604 (,66x),04x (,04x) 9,x (9,x),6 (,76x) 7,946 (4,8x),6 (9,79x),9 (6,094x) 9,7x (9,7x) 4,899x (4,899x) 4,8 (,797x) 7,96 (,97x),809 (0,06x) 9,8 (6,8x) 8,86x (8,86x) 8,96 (44,40x) 4,6 (,46x) 6,9 (,87x),6 (9,886x) 9,8 (,46x) 9,64x (9,64x) 9,70 (4,9x) 4,47 (,09x) 7,086 (,744x),809 (8,4x) 0,089x (0,089x),47x (,47x),09 (6,6x) 7,769 (0,06x) 4,84x (4,84x) 8,0x (8,0x) HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, triple grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (.60 yd ), the lift capacities will increase by 4,960 lb, without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. R 94 C Litronic 7

Lift Capacities with Gooseneck Boom 6 and Heavy Counterweight Stick 7 8 Stick 9 6 HD,0x (,0x) HD 4,79x (4,79x),948x (,948x),090x (,090x) 9,9x (9,9x),8x (,8x) HD 7,49x (7,49x),x (,x) 6,60 (9,44x) HD,x (,x),,9x (,9x) 6,40 (8,4x) 40,609x (40,609x) 9,60x (9,60x),78 (,64x),609 (9,798x) 9,9x (9,9x) 7,74x (7,74x) 8,04x (8,04x),4 (,x),76 (8,960x),76 (,78x) HD 8,8 (,4x) 0, (4,9x) 4,77 (0,7x),9 (7,064x) HD 44,74x (44,74x) 9,4 (,09x) 0,48 (,986x) 4,89 (9,64x),97 (6,7x) HD, (,9x) 8,6 (,794x),867 (0,679x),6 (6,998x) HD 6,0 (,90x) 8,80 (,99x),889 (0,94x),48 (6,667x) HD,84 (,46x) 7,7 (,77x),40 (0,x),9 (6,x) HD 4,07 (,98x) 7,46 (,96x),0 (0,0x) 9,96 (6,44x),47 (0,600x) 6,7 (4,60x),677 (9,x) 9,9 (,78x),6x (,6x),0 (,8x) 6,6 (4,846x),478 (9,66x) 9,64 (,87x) HD 6,874x (6,874x),479 (6,676x) 6,7 (,046x),44 (7,0x) HD 7,646x (7,646x),49 (8,06x) 6,4 (,840x),6 (8,06x) 9,68 (,77x) HD,67x (,67x),4x (,4x) 6,86 (8,06x),8 (,84x) HD 6,88x (6,88x), (,744x) 6,446 (9,40x),46 (,x) HD 4,x (4,x),949x (,949x) HD 8,76x (8,76x) 7,6x (7,6x) 4,4x (4,4x) 9,8x ( 9,8x) HD HD HD HD Stick HD HD HD HD HD HD HD HD 8,708x ( 8,708x) 4,76x (4,76x) 9,07x ( 9,07x),x (,x),69x (,69x),4x (,4x) 6,6x (6,6x),76x (,76x),97 (,09x) 9,7x (9,7x) 9,687x (9,687x) 6,8 (7,49x),640 (,6x) 40,04x (40,04x) 8,94x (8,94x),86 (,77x),68 (8,4x),089 (,6x) 8,069 ( 9,0x) 9,740x (9,740x) 7,690 (,68x) 9,79 (4,008x) 4, (9,90x),40 (6,006x) 7,760 (,70x) 6,08x (6,08x),067 (,90x) 7,79 (,0x),40 (9,798x) 9,877 (6,6x) 7,4 (,09x) 8,409x (8,409x), (,9x) 6,689 (,0x),90 (9,687x) 9,44 (,76x) 7, (,0x),404x (,404x),4x (,4x),98 (0,7x) 6,094 (,788x),949 (8,77x) 9,49 (4,68x),09x (,09x),400x (,400x),90 (6,896x),96 (,x),89 (6,6x) 9,49 (,46x),x (,x),4x (,4x) 6,48 (7,0x), (,96x) 7,89x ( 7,89x),867x (,867x),8x (,8x) 6,48x ( 6,48x) HD HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, triple grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (.60 yd ), the lift capacities will increase by 4,960 lb, without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. 8 R 94 C Litronic

Lift Capacities with Gooseneck Boom HD and Heavy Counterweight Stick 7 8 40 S-HD S-HD 0 S-HD Stick 9 6 40 S-HD S-HD 0 S-HD S-HD 6,6x (6,6x) S-HD 0 S-HD 7,7x (7,7x) 0 S-HD,76x (,76x),6x (,6x) S-HD 0,0x (0,0x),8x (,8x),4x (,4x) 9,x (9,x) 6,84 (7,47x) S-HD,x (,x) 7,880x (7,880x) 6,006x (6,006x) S-HD 4,447x (4,447x) 8,04x (8,04x),96x (,96x) 6,094 (8,607x) S-HD 7,76x (7,76x) 6,0x (6,0x) 0,48x (0,48x) 6,8 (7,94x) S-HD 44,7 (46,49x) 9,89 (,7x) 0,768 (4,097x),88 (9,7x) S-HD 4,08x (4,08x) 9,6 (0,x) 0,878 (,98x), (8,80x) 0 S-HD,4x (,4x) 4,4 (48,7x) 7,844 (,66x) 9,84 (,46x) 4,88 (0,4x) 0 S-HD,8x (,8x) 4,80 (47,9x) 7,977 (,87x) 9,798 (4,74x) 4,70 (9,798x) S-HD 8,074x (8,074x) 4,8 (46,76x) 7,40 (,7x) 9,489 (,68x) S-HD,400x (,400x) 4,6 (47,60x) 7,49 (,66x) 9,4 (,7x) 4,96 (9,90x) S-HD 4,498x (4,498x) 4,880x (4,880x) 7,7 (,68x) 9,7 (,876x) S-HD 46,78x (46,78x) 4,88 (44,798x) 7,7 (,40x) 9,4 (4,449x) S-HD 49,9x (49,9x),77x (,77x) 6,67x (6,67x) S-HD 6,8x (6,8x) 8,96x (8,96x) 8,04 (8,06x) 0 S-HD 0 S-HD 9,x (9,x) 7,866x (7,866x) S-HD S-HD 0 S-HD 0 S-HD S-HD S-HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, double grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (.60 yd ), the lift capacities will increase by 6,70 lb without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. R 94 C Litronic 9

Lift Capacities with Gooseneck Boom HD 4 and Heavy Counterweight Stick 7 8 40 S-HD S-HD 0 S-HD Stick 9 6 40 S-HD S-HD 0 S-HD S-HD,x (,x),7x (,7x) S-HD,0x (,0x) 0 S-HD 6,9x (6,9x) 4,99x (4,99x) 0 S-HD,44x (,44x),7x (,7x) 7,76x ( 7,76x) S-HD 6,046x (6,046x) 4,x (4,x) 8,960x (8,960x),96 (6,08x) S-HD,0x (,0x),89x (,89x) 7,9x (7,9x) 4,90x (4,90x),640 (,94x) S-HD 8,x (8,x) 0,7 (,0x) 4,969 (7,8x), (,7x) S-HD 8,947x (8,947x) 6,00x (6,00x) 9,90x (9,90x),06 (6,48x),089 (,977x) S-HD 6, (0,7x) 8,894 (,840x) 4, (8,4x),69 (,x) S-HD 0,900x (0,900x) 6,74 (9,696x) 9,048 (,98x) 4,066 (7,48x),60 (4,67x) 0 S-HD 6,x (6,x),99 (,70x) 7,990 (,766x),4 (8,87x) 0 S-HD 7,6x (7,6x), (,9x) 7,968 (,x),60 (8,98x),6 (4,947x) S-HD,78x (,78x) 40,6 (4,08x),0 (0,887x) 7,68 (,64x),6 (8,607x) S-HD,97x (,97x) 7,6x (7,6x) 4,846 (,9x) 7,46 (,0x),007 (8,4x) S-HD 40,8x (40,8x) 7,47x (7,47x),46 (8,748x) 7,880 (,4x),80 (7,064x) S-HD 4,679x (4,679x) 9,77x (9,77x),0 (9,86x) 7,46 (,69x),0 (7,0x) S-HD 40,477x (40,477x),769x (,769x) 4,76x (4,76x) 8,77 (8,78x) S-HD 47,4x (47,4x) 4,7x (4,7x),794 (6,0x) 8,0 (0,040x) 0 S-HD,44x (,44x) 6,976x (6,976x) 0 S-HD 4,987x (4,987x) 6,64x (6,64x) 0,94x (0,94x) S-HD S-HD 0 S-HD 0 S-HD S-HD S-HD The load values are quoted in lb on the backhoe bucket s load hook, and may be swung 60 on firm and even ground. Values quoted in brackets apply to the undercarriage when in longitudinal position. Capacities are valid for 4 wide, double grouser pads. Indicated loads are based on ISO 67 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via x). Maximum load for the backhoe bucket s lifting eye is 9, lb. Without bucket (.60 yd ), the lift capacities will increase by 6,70 lb without bucket cylinder, link and lever they increase by an additional,60 lb. Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. 0 R 94 C Litronic

Equipment Undercarriage S O Two-stage travel motors Three track guides per track frame Lifetime lubricated track rollers Tracks sealed and greased Idler protection Pads 4 Pads 0 Pads 0 Different undercarriage versions Four track guide Strong bottom sheet center part Renforced cover Uppercarriage S O Lockable tool box Handrails, non slip surfaces Tool kit Maintenance-free swing brake lock Maintenance-free HD-batteries Main switch for electric circuit Sound insulation Electric re-fueling pump Foot pedal swing positioning brake Customized colors Hydraulics S O Electronic pump regulation Step less work mode selector Accumulator for controlled attachment lowering with engine turned-off Filter with integrated fine filter area ( µm) Pressure test ports Leakage filter Liebherr Tool Control Hydraulic tank shut-off valve Pressure compensation Flow compensation Additional hydraulic circuits Bio-degradable hydr. oil Filter for secondary circuit Engine S O After-cooled Unit pump system Turbo charger Dry-type air cleaner w/pre-cleaner, main and safety element Air filter with automatic dust ejector Two hydrostatic fans Sensor controlled engine idling Fuel water separator Conform with standard level IIIA / Tier Engine cold starting aid Operator s Cab S O Load bearing sectional profile structure Roof right window and windshield armored Tinted windows Right window made of one piece (without post) Door with sliding window Rain hood over front window opening Wiper blades Emergecy exit rear window Sun blinds Seat and consoles independently adjustable (6-way adjustable seat) Storage tray Closed storage space Coat hook Removable foot mat Dome light Inside rear mirror Cigarette lighter and ashtray Seat belt Mechanical hour meters, readable from outside the cab Displays for engine operating condition Automatic air conditioning with defroster Radio installation Radio stereo Cooler Sun shade Heat Additional flood lights Wiper for lower window Roof window wiper Bullet proof window (fixed installation can not be opened) Upper protection guard (FOPS) Air power seat adjustment with heated cushion Electronic theft protection Beacon Extinguisher Attachment S O Semi-automatic central lubrication system (except link and tilt geometry) Cylinders with shock absorbers ReGeneration plus SAE split flanges on all high pressure lines Two flood lights on boom Sealed pivots/o-ring sealant between bucket and stick 9, lb lift eye on bucket or on quick change coupler Automatic central lubrication system (except link and tilt geometry) Central lubrication for lever with protection cover Bucket kinematics sealed up completely Overload warning device Hydr. or mechanical quick change coupler Likufix Piston rod protection Hydraulic lines for additional tools Quick disconnect hose couplers for additional tools Liebherr line of buckets Special application buckets Customized colors S = Standard, O = Option Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr to retain warranty. All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 948. R 94 C Litronic

The Liebherr Group of Companies Wide product range The Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr s highvalue products and services enjoy a high reputation in many other fields, too. The wide range includes domes - tic appliances, aerospace and transportation systems, machine tools and maritime cranes. Exceptional customer benefit Every product line provides a complete range of models in many different versions. With both its technical excel - lence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application. State-of-the-art technology To provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manu factured inhouse, for instance the entire drive and control techno - logy for construction equipment. Worldwide and independent Hans Liebherr founded the Liebherr family company in 949. Since that time, the enterprise has steadily grown to a Group of 0 companies with over 8,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the com pany. www.liebherr.us Printed in Germany by Eberl RG-BK-RP LFR/SP 4096--0.08 Liebherr Construction Equipment Co. 40 Chestnut Avenue, Newport News, VA 607, USA (7 7) 4, Fax (7 7) 9 8 87 0 www.liebherr.us, E-Mail: info.lce@liebherr.com