..., W A T.C H
HAMILTON WATCH MATERIALS CATALOG PREFACE The practical value of this s Catalog will be obvious to watch repairmen everywhere. But what may not be so obvious is that this catalog and the inventory of genuine materials it represents is but part of Hamilton's total facilities devoted to maintenance of service on its product. Informative technical and service literature on Hamilton watches is another. Factory service when and as needed is still another of these facilities. The keystone of the success of all of these facilities is their intelligent use by the watchmaker. And of American watchmakers, Hamilton is indeed proud. To them, more than anyone else in the industry, goes the credit for keeping America's Fine Watch fine. MATERIALS FOR HAMILTON WORLD WAR II TIMEPIECES are not included in this catalog. Because repair materials on war timepieces were generally taken over by the contracting branch of the government at the end of the war and because few war timepieces were sold for non-military use, no general statement as to the availability of materials can be made. There are no parts available, for instance, which are peculiar to the 4992B, a 16 size, 24 hour dial, sweep seconds, navigation watch. Similarly parts peculiar to Grade 2987, a 6/0 size, 12 hour dial, sweep seconds, wrist model are not available. Certain materials for still other war timepieces are also unavailable. Repair parts for the Hamilton 35 size Navigation Watch (also known as the Hamilton Chronometer Watch) and the Hamilton Marine Chronometer are available. War timepieces employing standard civilian movements such as the 992B, the 987 A, and the 987S, present no parts problems. s for all war timepieces, therefore, require separate inquiry direct to the Sales Department. CHANGES OVER PREVIOUS MATERIAL CATALOG are in some instances significant. Neither pinions nor wheels separately, nor staffs, where applicable, for center, third, and fourth are any longer available. Only wheel and pinion complete, or wheel and pinion and staff complete, as the case may be, are now available. The escape wheel, the escape pinion, and the escape wheel complete with pinion continue to be available as before. This change has been instituted to simplify inventory both here and in the watchmaker's possession as well as to afford labor savings in the trade of unstaking and restaking to replace components of the wheel and pinion assembly. Illustrations of selected grades of the different size Hamilton movements made have been added to assist the watchmaker in identifying movements. Illustrations of parts of currently manufactured movements have been replaced by enlarged illustrations of hard-to-identify parts of all Hamilton sizes and grades. Type style on tabular listings has been changed for easier reading and more rapid reference. Dial illustrations are photographic and therefore easier to identify. The new steel Hamilton Cabinet and The Mainspring Cabinet continue to be shown in this catalog. Watch oil offered in previous catalogs is no longer available. Hamilton makes its own oil for the lubrication of new watch movements but is not offering it for sale for general use. TO ORDER HAMILTON MATERIALS secure the movement grade number which is engraved on one of the bridges of virtually all Hamilton movements, then consult the index on page 2. Hamilton movements which do not have grade numbers engraved on them do carry serial numbers which can be checked against the serial numbers listed on pages 12 to 16 to secure the grade number. All materials are classified by watch size and grade on pages indicated in the index. When the material desired has been located under the appropriate grade, the order can be prepared. Always use catalog number and part name on material orders. All orders for Hamilton material should be sent to Hamilton material jobbers. The Sales Department on request will furnish a list of jobbers. Printed in U. S. A. 1-1642
TABLE OF CONTENTS AND GLOSSARY TABLE OF CONTENTS PAGE dj (Sealed) Case Construction... 33 Description of Hamil ton Wa tch Grades......... 7 Dial Descriptions... 37-41 Dial Illustrations.............. 33-36 Hand Descriptions............... 42-43 Hand Illustrations.......................... 42-43 s Difficult to Identify (Illustrations).. 10-11 Mainspring Chart... 32 Mainspring File........ 44 Cabinet... 44 Descriptions and Catalog Numbers 18 Size Movements Grades 924, 925, 926, 927, 928, 929, 930, 931, 932, 933, 934, 935, 936, 937, 938, 939, and 948... 18 Grades 940, 941, 942, 943, 944, and 946... 19 16 Size Movements Grades 950,952, 996, 950E, and 950B... 20 Grades 954, 962, 963, 966, 967, 972, 973, 956, 964, 965, 968, 969, 974, 975, 976, 977, and 978.... 21 Grades 960, 961, 970, 971, 990,991, 992, 993, 994, and 992B...................... 22 Grade 992E.............................. 23 12 Size Movements Grades 400 (Thin Model), 900, 910, 914, and 920......... 23 Grades 902, 904, 912, 916, 918, and 922...... 24 PAGE Descriptions and Catalog Numbers (Cont'd) 10 Size Movements Grades 917, 921, and 923....... 25 Size Movements Grades 981, 983, and 985.................. 25 6/ 0 Size Movements Grades 986, 988, 986A..... '....... 26 Grades 987, 987E, 987F, 987 A, 987S, and 979... 27 8/0 Size Movements Grades 747 and 748........ 28 12/ 0 Size Movements Grade 401................................ 28 14/ 0 Size Movements Grades 980, 980A, 980B, 982, and 982M... 29 18/ 0 Size Movements Grades 989 and 989E................ 29 20/0 Size Movements Grade 997................................ 30 21/ 0 Size Movements Grades 721, 750, 751 and 995............... 30 Grade 995A.............................. 31 22/ 0 Size Movements Grades 911 and 911M..................... 31 Movement Illustrati!'ns... '........... 3-6 Preface........,.............. 1 Serial Numbers... 12-16 View of a Typical Hamilton Watch (Exploded).. 8-9 GLOSSARY OF TERMS AND ABBREVIATIONS A.G.M.-Applied Gold Marker A.G.N.-Applied Gold Numeral B.F.-B1ack Figure B.M.- Blind Man &--Sealed (Cases) C.P.- Canadian Pacific D.R.-Double Roller D.S.-Double Sunk H.A.- Heavy Arabic H.G.-Heavy Gothic Htg.-Hunting HWW-Hayden W. Wheeler Incl.- Inclusive L.A.-Light Arabic L.S.- Lever Set Lum.-Luminous -Motor Barrel Movt.-Movement - Number O.D.- Outside diameter O.F.-Open face P.S.- Pendant Set S.A.--Strong Arabic S.R.-Single Roller S.S.- Single Sunk Str.-Strength T - T shape of mainspring brace W.F.-White figure Complete-an assembly which is complete with every component for that assembly Unset-Jewel, not in a setting, usually for friction use in a bridge or plate HAMILTON WATCH COMPANY LANCASTER, PENNA., U.S.A. Manufacturers of America's FINE Watch 2
HAMILTON WATCH MOVEMENT ILLUSTRATIONS 18 SIZE GRADE 936 Open face, 17 jewels, single roller before 42600 1, double roller after 426000 GRADE 925 Hunting, 17 jewels, single roller 16 SIZE GRADE 974 Open face, :u plate movt., 17 jewels, single roller before 247001, double roller after 1\0' 247000 GRADE 992 Open face, %: plate movt., 21 jewels, single rolier before 377001, d ouble roller after 1\0. 379000 GRADE 992B Open face, U plate movt.. 21 jewels, double roller GRADE 950 Open face, bridge movt., 23 jewels, double roller GRADE':950B Open face, bridge movt.. 23 jewels, double roller 3
HAMILTON WATCH MOVEMENT ILLUSTRATIONS 12 SIZE GHADE 902 Open face, bridge movt., If) jewels, double roller GRADE 912 Open face, M platemovt.. ] 7 jewels, double roller G RADE 918 Open fac ',!U piatemovt., 19 jewels, double r oller G RADE 922 Open face, bridge movt., 23 jewels, double roller 10 SIZE G RADE 917 Open face, % piatemovt., 17 jewels, double roller GIIADE 921 Open face, bridge mov., 21 jewels, double roller GRADE 923 Open face, bridge movt.. 23 jewels, double roller o SIZE G HADE 983 Hunting, bridge movt., 17 jewels, double roiler
HAMILTON WATCH MOVEMENT ILLUSTRATIONS 6/0 SIZE G n ADE 986 Open face, % plate movt" 17 j ewels, double roller GRAUE 986A OI)Cn face, pla.temovt.. 17 jewels, double ro ller GRA DE 987 H unting. M plate movt.. 17 jewels, double r oller G HADE 9a7A H unting, % plate movt., 17 j ewels, double r oller GRAUE 9875 [f unting, plate movt.. 17 jewels, d ouble roller G naue 979 H unting, %' plate movt., 19 jewels, double roller 8/0 SIZE C HADE 747 H mlting, U plate mo\' t.. 17 jewels, double roller GRAUE 7-18 (u ne p iece bllrrel br idye) II U1lting. plate movt.. 18 jewels, d o uble roller. direct drive ccnter sc<::onds GRA DE 748 (tu'v p iece barrel bdd(je) H unting. % plate movt., 18 jewels. double roller. d i r ect drive c e nte r seconds 14/0 SIZE G RADE 980 Open face, % piate movt., 17 jewels, double roller GRADE 982 Open face, U plate movt., 19 jewels, double roller G RADE 982 1 Open face, plate movt.. 19 jewels, d ouble roller 18/0 SIZE 20/0 SIZE G IlADE 989 Open face, %' plate movt., 17 jewels, double roller G RADE 99i O pe n face, * plate movt.. 17 jewels, double roller 5
HAMILTON WATCH MOVEMENT ILLUSTRATIONS 21/ 0 SIZE GRADE 721 Open face, pjatemovt.., 17 jewels, double roller GRADE 750 Open face, S platemovt. 17 jewels, double roller GRADE 751 Open face,!{ plate movt.. 17 jewels, -douale roller GRADE 995 Open face, plate movt.. 17 jewels, double roller 22/ 0 SIZE GIlADE 911 Open faco, 4 plate movt.. 17 jewels, double roller GRADE 91lM Opcu face. platemovt., 17 jewels, double roiler When and as new Hamilton movements are released plate illustrations on gummed paper will be furnished to paste on this page. ALWAYS USE GENUINE HAMILTON MATERIAL
7 DESCRIPTION OF HAMILTON WATCH GRADES 18 SIZE Grade Description Grade 910, O.F., % plate movt., 17 jewels,"d.r. DC8cription 912, O.F., % plate movt., 17 jewels, n.r. 924, O.F., Full plate movt., 17 jewels, S.R. 914, D.F., % plate movt., 17 jewels, n.r. 925, Rtg., 17 jewels, S.R. 916, O.F., % plate movt., 17 jewels, D.R. 926, O.F., 17 jewels, S.R. 918, O.F., % plate movt., 19 jewels, n.r. 927, Htg., 17 jewels, S.R. 920, O.F., bridge movt., 23 jewels, n.r. 928, O.F., 15 jewels, S.R. 922, O.F., bridge movt., 23 jewels, n.r. 929, Rtg., 15 jewels, S.R. 400, thin, O.F., bridge movt., 21 jewels, D.R. 930, O.F., 16 jewels, S.R. 931, Htg., 16 jewels, S.R. 10 SIZE 932, O.F., 16 jewels, S.R. 933, Rtg., 16 jewels, S.R. 917, O.F., % plate movt., 17 jewels, n.r. 934, O.F., 17 jewels, S.R. 921, O.F., bridge movt., 21 jewels, n.r. 935, Htg., 17 jewels, S.R. 923, O.F., bridge movt., 23 jewels, n.r. 936, O.F., 17 jewels, S.R. and D.R. 937, R tg., 17 jewels, S.R. and D.R. 0 SIZE 938, O.F., 17 jewels, D.R. 981, Rtg., plate movt., 17 jewels, D.R. 939, Rtg., 17 jewels, D.R. 983, Rtg., bridge movt. 17 jewels, D.R. 940, O.F., 21 jewels, S.R. and D.R. 985, Rtg., bridge movt. 19 jewels, D.R. 941, Rtg., 21 jewels, S.R. and D.R. 942, O.F., 21 jewels, D.R. 6/0 SIZE 943, Rtg., 21 jewels, D.R. 944, O.F., 19 jewels, D.R. 979, Rtg., %" plate movt. 19 jewels, D.R. 946, O.F., 23 jewels, n.r. 986, O.F., %" plate movt. 17 jewels, D.R. 948, O.F., 17 jewels, D.R. 986A, O.F., plate movt., 17 jewels. D.R. 987, Rtg.,.% plate movt., 17 jewels, D.R. 987A, Rtg.,.% plate movt., 17 jewels, D.R. 16 SIZE 987E, Rtg., %" plate movt., 17 jewels, D.R. 950, O.F., bridge movt., 23 jewels, D.R. 987F, Rtg., :ki: plate movt., 17 jewels, D.R. 950B, O.F., bridge movt., 23 jewels, D.R. 9875, Rtg.,.% plate movt. 17 jewels, D.R. 950E, O.F., bridge movt., 23 jewels, D.R. 988, O.F. %" plate movt., 17 jewels, D.R. 952, O.F., bridge movt., 19 jewels, D.R. 954, O.F., %' plate movt., 17 jewels, n.r. 8/0 SIZE 956, O.F.,.% plate movt., 17 jewels, S.R. 747, O.F., % plate movt., 17 jewels, n.r. 960, O.F., bridge movt., 21 jewels, D.R. 748, O.F., % plate movt., 18 jewels, D.R. 961, Htg., bridge movt., 21 jewels, D.R. 962, O.F., bridge movt., 17 jewels, n.r. 12/0 SIZE 963, Rtg., bridge movt., 17 jewels, n.r. 964, O.F., bridge movt., 17 jewels, S.R. 401, O.F., plate movt., 19 jewels, n.r. 965, Rtg., bridge movt., 17 jewels, S.R. 966, O.F., plate movt., 17 jewels, n.r. 14/0 SIZE 967, Rtg., plate movt., 17 jewels, n.r. 980, O.F.,.% plate movt., 17 jewels, n.r. 968, O.F.,.% plate movt., 17 jewels, S.R. 980A, O.F.,.% plate movt., 17 jewels, n.r. 969, Htg.,.% plate movt., 17 jewels, S.R. 980n, O.F., % plate movt., 17 jewels, n.r. 970, O.F.,.% plate movt., 21 jewels, n.r. 982, O.F.,.% plate movt., 19 jewels, n.r. 971, Htg., % plate movt., 21 jewels, D.R. 982M, O.F., % plate movt., 19 jewels, D.R. 972, O.F., % plate movt., 17 jewels, S.R. and D.R. 973, Rtg., % plate movt., 17 jewels, S.R. and D.R. 18/0 SIZE 974, O.F., % plate movt., 17 jewels, S.R. and D.R. 975, Htg., plate movt., 17 jewels, S.R. 989, O.F., % plate movt., 17 jewels, D.R. 976, O.F., % plate movt., 16 jewels, S.R. 989E, O.F., % plate movt., 17 jewels, D.R. 977, Rtg.,.% plate movt., 16 jewels, S.R. 978, O.F., %' plate movt., 17 jewels, D.R. 990, O.F., % plate movt., 21 jewels, D.R. 991, Htg.,.% plate movt., 21 jewels, D.R. 992, O.F., % plate movt., 21 jewels, S.R. and D.R. 20/0 SIZE 997, O.F., plate movt., 17 jewels, D.R. 992n, O.F., % plate movt., 21 jewels, D.R. 21/0 SIZE 992E, O.F., % plate movt., 21 jewels, D.R. 721, O.F., % plate movt., 17 jewels, D.R. 993, Htg., % plate movt., 21 jewels, D.R. 750, O.F., % plate movt., 17 jewels, D.R. 994, O.F., bridge movt., 21 jewels, D.R. 751, O.F.,.% plate movt., 17 jewels, D.R. 996, O.F., 7i plate movt., 19 jewels, D.R. 995, O.F., %" plate movt., 17 jewels, D.R. 995A, O.F., % plate movt., 17 jewels, D.R. 12 SIZE 900, O.F., bridge movt., 19 jewels, D.R. 22/0 SIZE 902, O.F., bridge movt., 19 jewels, D.R. 9U, O.F., % plate movt., 17 jewels, D.R. 904, O.F., bridge movt'j 21 jewels, D.R. 9UM, O.F., % plate movt., 17 jewels, D.R.
co, '-"", '--' 0 JEWEL, cenler lower TYPICAL PARTS OF A HAMILTON MOVEMENT SPRIHG, clulch lever lever, selting LEVER, clulch WHEEl (Sl, selling Shown here in what are known as "exploded" views are all the parts of a typical Hamilton watch movement. The illustrations are based on a Hamilton 16 size watch. Except for obvious variations in size, shape, and certain parts peculiar to given models, the illustrations show typical Hamilton parts in a manner which suggest their assembly relationship. The illustrations will be of special interest to apprentices, junior watchmakers, and others who have recently joined the trade. Not only are typical parts shown in thirddimension and in their relative positions to one another, but they are identified by part names employed throughout this catalog. WHEEL, minufe, complete with pinion SPRIHG, selling cap DIAL SIDE JEWel. balance lower PIH (Sl, banking JEWfL, third and four lh lower EHDSTOH! CAP, bal' nce lower JEWEL (S). escape and pallet lower '('; ) bj@, EHDSTOH! CAP, escape and p.llel lower a@ PINIOH, cannon WHEEl, hour S I::l -< ;; en o ""l > >-3 I:'"'
TRAIN SIDE ARBOR, barrel MAINSPRING BARREL.'" WHEEL, lower winding BRIDGE, barrel SCREW, selling Im r fb loe!...._...' SPRING, click WHEEL, third and Pinion!;:J1:Xl! WHEEL, center an d pinion :;: '--, "n-'" t! SJ == == tfj >-3./ l '" I (I "'". ",,,,, ".. ""."...,,,", "'" r l r ROLLER, sm. II L V; ROllER large,.n... '',' "", 4. / '"''' '''''' I. / q... JEWEl, balance upper SPRING, reg'i'lor SCREW. regulating, micrometric COCK, balance REGULATOR l CAP, bala... nce upper.. endslone..., / '" ""'lw / SPRING, h.ir i\, EI AHD FORI WtlH SIONES 'l BRtDGE, p.llet / q,j,f ',/./. L ARBOR, p.llet - /' /' g? 'SJ.' "" '" / 'te h WHEEL, b.lance., I JEWEL, p.ilet 'pper!j o PINION, "cape WHm, fourth,.n dpinion BRIDGE, trorn L JEWEL, "cape 'pper EHDSI OHE CAP, escape upper., 1/1t 'JEWEL, fourth 'pper
MATERIALS DIFFICULT TO IDENTIFY Setting Cap Springs Because the conventional parts of a watch are readily identified by watch repairmen, the parts illustrations employed in previous catalogs have been eliminated. Replacing the previous illustrations are the-difficultto-identify parts shown on these pages. These parts - setting levers- setting cap springs- and click springs are shown five times actual size. Beneath each illustration is the catalog number of the part, the size watch in which it is employed, and the specific grade numbers in which it is used. identification problems not covered by illustrations can be solved by sending the actual part and the grade and serial number of the model from which it was removed to your Hamilton Wholesaler or the Sales Department, Hamilton Watch Company, Lancaster, Pennsylvania. CAT. NO. m 16 Size Grade Nos.-1928. 9508 t t CAT, NO, 6039 10 Size Grade N,.-923 CAT, NO, 6040 10 Size Grade Nos.-917, 921 CAT. NO. 2mA 6/ 0 Size Grade N,.- 987A CAT. NO. 5099 H/ O Size Grade Nos.-980. 982. 9808. 982M CAT. NO. 2940 21 / 0 Size Grade Nos.-995, 995A, 997, 721 CAT. NO, 6240 22 / 0 Size Grade Nos.-911, 911M ALWAYS USE GENUINE HAMILTON MATERIAL 10
MATERIALS DIFFICULT TO IDENTIFY Setting Levers H CAT. NO. 6022 10 Size Grade Nos.-917, 921, 923 CAT. NO. 2422 CAT. NO. 2522 CAT. NO. 2SllA 6/ 0 Size 6/ 0 Size 6/0 Size Grade Nos.-986, 986A Grade Nos.-981, 981E, 981F, 919, 919F Grade -981A CAT. NO. 5022 14/ 0 Size Grade Nos.-980, 980A, 980B, 982, 9B2M 0 CAT. NO. 2122 CAT. NO. 2m 18/ 0 Size 20/0-21 / 0 Sizes Grade Nos.-989, 98H Grade Nos.-99S, 99SA, 991, 121 CAT. NO. 1222 22/0 Size Grade Nos.-9I1, 911M Click Springs CAT, NO, 50 18 Size Grade Nos.-AII Grades CAT. NO. 311 t 6 Size Grade Nos.-AII Grades, excepl 992B, 950B CAT. NO. m 16 Size Grade Nos.-992B, 9S0B CAT. NO, 1141 12 Size Grad. Nos.-910, 914, 900, 920. CAT. NO. 3041 12A l ize Grade Nos.-912, 916, 922, 901, 9a4, 918 CAT. NO. 6020 10 Size Grade Kos.-911, 921, 923 G CAT. NO. 1920 6/ 0 lize Grade Nos.-98.6, 988 CAT. NO. 2320 6/ 0, 18/ 0, 14/ 0 Sizes Grade Kos.-986A, 981, 981E, 981F, 987A, 980, 982, 982M, 980A, 980B, 989, 98H, 919, 979F CAT. NO. 2920 20/ 0-21 / 0 Sizes Grod. Nos.-995,.99SA, 991, 121 CAT. NO. 6220 22/ 0 l ize Grade Nos.-9I1, 911M ALWAYS USE GENUINE MATERIAL 11
12 SERIAL NUMBERS AND GRADES Grade Grade Grade Grade Grade 1 20 936 32001-300 926 58101-200 974 77701-900 975 121001-500 941 C 21-30 932 32301-700 930 58201-300 972 77901-78000 977 121501-122000 943 31-60 936 32701-33000 934 58301-400 966 78001-500 970 122001-300 940 C 61-400 932 33001-500 931 58401-500 976 78501-700 972 122301-400 942 401-1000 936 33501-800 927 58501-600 972 78701-900 974 122401-123000 940 1001-20 937 33801-34000 935 58601-800 97. 78901-79000 976 123001-124000 941 G 1021-30 933 34001-500 92S 58801-59000 976 79001-100 973 124001-100 942 1031-60 937 34501-700 930 59001-300 973 79101-300 975 124101-800 940 1061-1100 933 34701-800 926 59301-500 967 79301-700 977 124801-125000 942 1101-300 937 34801-35000 934 59501-700 975 79701-900 975 125001-126000 927 1301-600 933 35001-800 931 59701-60000 977 79901-80000 973 126001-127000 924 1601-2000 937 35801-36000 935 60001-500 976 80001-200 972 127001-128000 941 2001-3000 7J 36001-37000 92' 60501 7()() 974 80201-400 974 128001-129000 936 3001-100 931 37001-38000 929 60701-61000 976 80401-600 970 129001-130000 925 3101-500 935 38001-500 92. 6 1001-200 975 80601-700 972 130001-500 924 3501-600 931 38501-600 930 61201-500 977 80701-900 974 130501-131000 926 3601-900 935 38601-000 934 6 1501-600 973 80901-81000 976 13 1001-132000 925 3901-4000 931 38001-39000 926 6 1601-800 975 8 1001-300 961 132001-100 926 4001--300 930 39001-200 931 6 1SO 1-62000 977 8 1301-SOO 965 132101-200 934 4301-5100 934 39201-500 935 62001-100 972 8 1501-82000 961 132201-500 926 5101-400 926 39501-700 927 62101-300 974 82001-300 972 132501-133000 924 5401-600 934 3970.1-900 935 62301-500 976 82301-500 974 133001-134000 937 5601-6000 930 39901-40000 931 62501-700 974 82501-600 970 134001-135000 924 6001-600 93. 40001-200 930 62701-900 972 82601-700 972 135001-136000 925 6601-700 93. 40201-500 934 62901-63000 974 82701-BOO 974 136001-137000 926 6701-800 936 40501-41000 926 63001-500 977 82801-900 96S 137001-100 llj 6801-7000 932 41001-500 929 63501-600 975 82901-83000 976 137101-138000 927 7001-10 17J 41501-42000 927 63601-800 977 83001-400 977 138001-139000 940 7011-600 937 42001-43000 999 63801-900 975 83401-500 971 139001-140000 937 7601-700 939 43001-300 941 63901-64000 973 83501-700 975 140001-300 93. 7701-BOO 937 43301-500 943 64001-100 97. 83701-BOO 973 140301-141000 942 7S01-8OO0 933 43501-700 937 64 101-200 972 83S01-900 975 14 1001-142000 941 8001-700 936 43701-900 941 64201-300 97' 83901-84000 969 142001-143000 940 8701-800 93S 43901-44000 943 64301-600 972 84001-400 974 143001-100 927 8801-9000 936 44001-02 21J 64601-700 976 84401-600 970 143101-144000 925 9001-300 937 44003-400 93. 64701-900 97. 84501-700 972 144001-145000 924 9301-600 939 44401-600 942 64901-6.5000 976 84701-800 96S 145001-146000 925 9601-S00 937 44501-45000 93. 65001-200 973 84S01-85000 976 146001-400 934 9801-900 933 45001-46000 929 66201--300 977 85001-200 937 146401-147000 92. 9901-10000 939 46001-500 926 65301-400 975 85201-900 941 147001-148000 927 10001-200 93S 46501-800 934 65401-500 973 85901-86000 943 148001-149000 940 10201-400 936 4.6801-47000 930 65501-700 977 86001-87000 92. 149001-150000 925 10401-50 932 47001-600 927 65701-900 975 87001-88000 929 150001-151000 924 10451-500 936 47501-700 935 66901-66000 977 8S001-500 926 151001-400 927 10501-700 93. 47701-48000 931 66001-200 976 88501-89000 930 151401-500 935 10701-900 936 48001-05 942 66201--300 974 89001-500 941 151501-152000 927 10901-11000 93S 48006-300.40 66301-500 972 89501-90000 937 152001-153000 936 11001-12000 936 48301-500 942 66501-600 976 90001-100 92. 153001-154000 941 12001-200 939 48501-900 940 66601-700 974 90101-950 99. 154001-155000 936 12201-13000 937 48901-49000 942 66701-800 972 91001-92000 925 155001-156000 927 13001-400 999 49001-400 927 66801-67000 97. 92001-200 940 156001-157000 940 13401-14000 93S 49401-900 925 67001-100 977 92201-93000 936 157001-158000 925 14001-15000 999 49901-50 llj 67101-300 975 93001-94000 927 158001-159000 940 15001-300 939 50071-500 962 67301-600 97. 94001-003 934 159001-160000 941 15301-15401 21J 50501-750 960 67601-800 975 94004-95000 928 160001-161000 940 15302-700 937 50751-50850 964 67801-68000 9'77 95001-90000 923 161001-162000 941 15701-16000 939 50851-51000 960 68001-800 960 96001-100 942 162001-1 63000 926 16001-100 931 5 1001-5 1300 16. 68801-69000 964 96101-700 940 163001-164000 943 16101-200 930 51301-4.00 963 69001-100 977 96701-97000 936 164001-165000 940 16201-300 927 51401 650 961 69101-200 975 97001-900 929 165001-166000 925 16301-400 931 5 1651-750 965 69201-400 973 97901-98000 927 166001-167000 92. 16401-600 927 51751-52000 961 69401-600 975 98001-99000 924 167001-168000 927 16601-17000 931 52001-300 16. 69601-70000 977 99001-100000 925 168001-169000 940 17001-500 929 52301-500 976 70001-200 976 100001-101000.24 169001-400 935 17501-1S000 931 52501-700 974 70201-400 970 101001-102000 925 16401-170000 927 18001-200 928 52701-800 966 70401-600 968 102001-103000 922 170001-171000 999 18201--300 926 52801-53000 97. 70601-900 972 103001-104000 927 171001-172000.25 18301-500 928 53001-53070 16. 70901-71000 974 104001-105000 940 172001-100 934 18501-19500 930 53071-53500 977 71001-200 975 105001-500 925 172101-173000 92. 19501-700 926 53501-900 975 71201-500 971 105501-106000 927 17300 1-174000 925 19701-20000 930 53901-54000 967 71501-700 975 106001-107000 940 174001-175000 924 20001-300 934 54001-200 972 71701-90 973 107001-400 941 175002-176000 HWW'" 20301-500 926 54201-300.74 71791-800 969 107401-500 943 175001-699 HWW'" 20501-21000 999 54301-500 976 71801-900 977 107501-800 941 176001-177000 940 21001-300 935 54501-700 974 71901-72000 975 107801-108000 943 177001-178000 927 21301-500 927 54701-800 96S 72001-100 974 108001-200 92. 17BOOI-179000 942 2 150I-BOO 935 54801-55000 976 72101-300 976 108201-109000 926 179001-500 935 21S01-225OO 927 55001-300 973 72301-600 974 109001-SOO 927 179501-180000 927 22501-BOO 931 55301-600 977 72601-700 968 109501-110000 925 ls0001-181000 940 22801-23000 935 55601-700.69 72701-900 976 110001-900 940 18 1001-182000.41 23001-200 92. 55701-800 977 72901-73000 972 110901-111000 942 182001-300 926 23201-500 7J 55801-56000 975 73001-200 975 111001--500 937 182301-400 934 24001-500 926 56001--300 974 73201-300 973 111501-112000 941 182401-183000 926 24501-25000 934 56301-500 97. 73301-74000 977 112001-200 92. 183001-184000 941 25001-100 llj 56501-600 966 74001-400 97. 112201-113000 926 184001-185000 940 25101-400 927 56601-S00 972 74401-600 972 113001-11 4000 925 185001-1 86000 925 25401-800 931 56801-900 974 7460 1-75000 976 114001-003 940 186001-187000 942 25801-26000 935 56901-57000 976 75001-76799 HWW 114004-115000 93. 187001-188000 927 26001-500 930 57001-300 977 76002-76800 RWW 115001-116000 927 18800 1-189000 924 26501-27000 928 57301-500 975 77001-100 96. 116001-117000 940 189001-190000 925 27001-28000 929 57501-600 973 77101-300 973 117001-118000 925 190001-191000 926 28001-29000 999 57601-800 975 77301-500 975 118001-119000 999 191001-192000 927 29001-800 927 57801-58000 977 77501-600 971 119001-120000 925 192001-193000 924 29801-30000 935 58001-100 972 77601-700 973 120001-121000 92' 193001-194000 92. "'Haydn W. Wheeler model I I I I I = G
Grade Grade Grade Grade Grade SERIAL NUMBERS AND GRADES 194001-195000 92. 275002-100 HWW' 3 17601-700 969 355001-800 975 404001-405000 92. 195001-500 935 275102-200 HWW' 3 17701-318000 973 355801-900 973 40500 1-406000 92. 195501-196000 927 275202-460 HWW 3 18001-100 972 355901-356000 993 406001-407000 940 196001-197000 92. 275462-500 HWW' 318101-900 97' 356001-500 990 407001-408000 926 197001-198000 937 276001-277000 940 3 1S00I-3HIOOO 970 356501-357000 97' 408001-4 16000 940 19800 1-190000 9aa 277001-278000 9., 3 19001-100 971 35700 1-358000 975 416001-417000 926 199001-200000 92. 278001-279000 9'0 319101-320000 975 358001-359000 97' 417001-418000 940 200001-201000 926 279001-280000 925 320001-300 972 359001-360000 975 4 18001-419000 926 201001-202000 025 280001-281000 93. 320301-400 9.S 36000t-SSO 960 41900 1-4 20000 941 202001-500 92. 281001-282000 927 320401-321000 97. 360801-361000 960 420001-421000 9'0 202501 203000 93' 282001-283000 92. 321001-200 973 361001-100 993 421001-422000 926 203001-204000 927 283001-284000 925 321201-322000 975 36UOI-300 091 422001-423000 92' 204001-100 93' 284001-500 93' 322001-323000 97' 361301-400 993 423001-425000 926 204101-500 92. 284501-900 92. 323001-700 975 361401-700 975 425001-426000 924 204501-205000 93' 284901-285000 999 323701-324000 973 361701-20 973 426001-500 936 205001-206000 941 285001-286000 925 32400 1-325000 960 361721-362000 97. 426501-427000 944 206001-207000 940 286001-287000 940 32500 1-100 965 362001-900 974 427001-428000 924 207001-208000 927 287001-288000 927 32510 1-326000 961 362901-363000 990 428001-429000 926 208001-900 999 288001-289000 940 326001-327000 97. 363001-364000 975 429001-430000 925 208901-209000 9'0 28900 1-290000 927 327001-300 971 364001-365000 974 430001-431000 924 209001-210000 925 290001-800 93. 327301-500 973 365001-100 975 43100 1-43 2000 925 210001-211000 940 290801-29 1000 938 327501-328000 975 365101-300 973 432001-433000 940 211001-212000 927 291001-292000 925 32800 1-300 992 365301-366000 975 433001-434000 924 212001-213000 940 292001-500 940 328301-500 990 366001-367000 974 434001-.500 940 213001-500 941 29250 1-293000 942 328501-329000 992 367001-500 975 434501-600 9'2 2 13501-600 937 29300 1-294000 925 329001-330000 975 367501-368000 993 434601-435000 94. 213601-214000 925 294001-295000 926 330001-100 992 368001-369000 97. 435001-436000 924 214001-215000 924 29500 1-296000 927 33010 1-500 990 369001-370000 992 436001-438500 940 215001-216000 927 296001-297000 940 330501-331000 992 370001-100 990 43850 1-800 94. 216001-217000 940 297001-298000 927 331001-200 973 370101-400 992 438801-900 942 217001-218000 927 298001-299000 940 331201-400 975 370401-500 974 438001-440000 946 218001-219000 9.0 29900 1-300000 925 331401-500 969 370501-800 990 440001-441000 92. 219001-220000 925 300001-300 972 331501-700 971 370801-371400 992 441001-442000 940 220001-221000 924 300301-500 970 331701-800 973 371401-500 972 442001-400 946 221001-222000 927 300501-900 974 331801-332000 975 371501-373500 974 442401-500 942 222001-223000 92. 300901-301000 968 332001-200 992 373501-700 990 442501-443000 946 223001-02 927 301001-400 975 332201-800 972 373701-374000 992 443001-444000 926 223003-04 941 301401-500 971 332801-333000 974 374001-200 97. 444001-445000 924 223005 937 301501-302000 973 333001-500 975 374201-700 990 445001-446000 927 223006-224000 927 302001-100 990 333501-700 971 374701-375000 974 44600 1-447000 924 224001-225000 92' 302101-200 992 333701-900 973 375001-100 993 447001-448000 925 225001-226000 927 302201-300 990 333{l0 1-334000 975 375101-500 991 448001-449000 926 226001-227000 9'0 302301-900 992 334001-200 972 375501-376000 975 44{l00 1-450000 924 227001-228000 925 302901-303000 990 334201-800 992 376001-200 972 45000 1-451000 926 228001 229000 924 303001-100 973 334801-335000 990 376201-500 974 451001-452000 925 229001-230000 925 303101-300 971 335001-600 975 376501-377000 992 452001-453000 940 230001-500 926 303301-800 975 335601-800 971 377001-200 973 45300}-4540oo 924 230501-231000 92. 30380 1-304000 973 335801-900 973 377201-378000 975 454001-456000 940 231001-565 937 304001-100 970 335901-336000 975 3 78001-379000 974 456001-457000 999 231566-232000 927 304101-400 972 336001-200 972 379001-380800 992 457001-458000 940 232001-233000 940 304401-305000 974 336201-337000 974 380801-38 1000 990 458001-459000 999 23300 1-234000 941 305001-100 973 337001-338000 975 381001-382000 992 459001-110 946 234001-235000 940 305 101-200 971 338001-200 974 382001-100 990 459111-118 942 235001-236000 941 305201-300 969 338201-900 992 382101-383000 974 459119-200 946 236001-237000 93. 305301-900 975 338901-339000 990 383001-300 992 459201-700 942 237001-238000 941 305901-306000 973 339001-300 971 383301-700 990 459701-460000 94. 238001-239000 92. 306001-400 972 339301-500 973 383701-384000 972 460001-461900 9'0 239001-500 943 306401-..107000 974 339501-340000 975 384001-700 974 461901-462000 940 239501-240000 941 307001-100 975 340001-200 974 384701-900 972 462001-463000 999 240001-241000 940 307101-300 971 340201-300 972 384901-385000 974 463001-500 9'0 241001-242000 941 307301-400 975 340301-600 970 385001-600 972 463501-464000 940 242001-243000 940 307401-500 973 340601-341000 974 385601-800 974 464001-466000 926 243001-244000 927 307501-600 975 341001-200 973 385801-386000 990 46600 1-467000 924 244001-245000 936 307601-700 971 341201-342000 975 386001-800 974 467001-468000 926 245001-246000 925 307701-900 975 342001-300 990 386801-900 992 468001-469000 940 246001-247000 940 307901-308000 969 342301-343000 992 386901-387000 972 469001-470000 92. 247001-248000 927 308001-700 990 343001-344000 975 387001-100 990 470001-471000 926 248001-249000 940 308701-309000 992 344001-200 970 387101-900 992 471001-472000 946 249001-250000 927 309001-100 971 344201-400 972 387901-388000 972 472001-473000 924 250001-251000 92. 309101-400 973 344401-345000 97. 388001-400 990 473001-474000 940 251001-252000 927 309401-310000 975 34500 1-346000 975 388401-389000 992 474001-475000 92. 252001-253000 924 3 10001-400 970 346001-300 992 389001-391000 97. 475001-476000 940 253001-254000 925 310401-31 1000 974 346301-347000 974 391001-300 972 476001-477000 924 254001-255000 940 311001-700 975 34700 1-180 993 391301-392000 974 477001-478000 940 255001-256000 925 311701-312000 973 347181-200 991 392001-800 992 478001-479000 926 256001-257000 92. 312001-200 970 347201-300 975 392801-393000 990 479001-480000 944 257001-258000 941 3 12201-500 972 347301-400 973 393001-400 975 480001-48 1000 926 258001-259000 924 3 12501-600 968 347401-700 993 393401-600 973 48 1001-482000 927 259001-260000 941 312601-313000 97. 347701-900 991 393601-394000 993 482001-483000 924 260001-261000 940 313001-100 973 347901-348000 973 394001-200 972 483001-484000 926 261001-262000 927 3 13 101-400 971 348001-200 970 394201-395000 974 484001-485000 940 262001-263000 926 313401-600 969 34820 1-800 97' 395001-100 993 485001-486000 925 263001-264000 925 313601-314000 975 348801-349000 972 395101-900 991 486001-487000 999 264001-265000 9.0 31400J-600 974 349001-350000 975 395901-396000 993 487001-488000 92. 265001-266000 927 314601-900 972 350001-300 990 396001-397000 992 488001-489000 999 266001-267000 940 314901-315000 970 350301-400 97. 397001-200 990 4 89001-492000 92. 267001-268000 925 315001-100 971 350401-600 990 397201-398000 992 492001-493000 940 268001-269000 9'0 315101-400 973 350601-351000 992 398001-200 972 4.93001-494000 946 269001-270000 927 315401-316000 975 351001-352000 975 398201-399000 992 494001-495000 944 270001-271000 9'0 316001-200 992 352001-100 968 399001-600 993 495001-496000 940 271001-272000 925 316201-300 972 352101-353000 974 399601-400000 975 496001-497000 925 272001-273000 926 3 16301-500 992 353001-354000 975 400001-401000 024 497001-498000 999 273001-274000 941 316501-317000 972 354001-400 992 401001-402000 940 498001-499000 936 274001-275000 92. 317001-600 975 354401-355000 97. 402001-404000 924 499001-501000 940 *Haydn W. Wheeler model 13
SERIAL NUMBERS AND GRADES Grade Grade Grade Grade Grade 50 1001900 92. B625001-626000 999 Ball 717201718000 975L 776701-777000 975 836901-837000 974P 50 190 1-502000 93' 626001-627000 926 718001-721500 97' 777001-300 972 837001-838000 975P 502001-503000 92. B626001-627000 999 Ball 721501-722000 992 777301-778300 97. 838001-839000 975L 503001-504000 999 627001-628000 924 722001-724000 974 778301-800 992 839001-400 974L 504001-507000 940 B627001-628000 999 BaU 724001-725000 972 778801-900 972 839401-700 992L 507001-508000 999 628001-630800 925 725001-726000 97. 778901-779300 97. 839701 840000 990L 508001-509900 9'0 B628001-630S00 999 Ball 726001-727000 992 779301-780100 992 840001-400 952L 509901-510000 9.2 631001-636000 940 727001-728000 97. 780101-300 972 840401-900 950L 510001-511500 940 B631001-636000 999 Ba.U 728001-729000 992 780301 781300 992 840901-841000 952L 511501-700 942 636001-637000 941 729001-730000 975 781301-400 972 841001-842000 975P 511701-517000 940 B636oo1-637000 999 Ball 730001-731000 992 781401-500 97. 842001-843000 974L 517001-519000 924 637001-638000 936 73 100 1-732000 975 781501-782000 992 843001-844000 974P 519001-521000 925 B637001-638000 999 Ball 732001-734000 992 782001-783000 975 844001-200 993 521001-523000 94' 638001-639000 926 734001-735000 975 783001-600 992 844201-845000 975 523001-524000 946 B638001-639000 999 Ball 735001-736000 974 783601-784000 97. 845001-200 992 524001-531000 940 639001-640000 925 736001-738000 975 784001-785000 992 845201-400 972 531001-532000 926 B639001-640ooo 999 Ball 738001-739000 97. 785001-500 952 845401-700 954 532001-10 93' 640001-642000 924 739001-74.0000 975 785501-786000 950 845701-846000 972 532011-533000 926 B640001-6444oo 999 Ball 740001-100 97. 786001-787000 992 846001-500 952 533001-535500 999 644401-645000 940 740101-200 972 787001-400 97. 846501-847000 950 535501-536000 940 645001-645500 927 740201-900 974 787401-788000 972 847001-200 972 536001-537000 936 B645OO1-645500 999 Ball 740901-741000 975 788001-791300 992 847201-849000 974 537001-538000 924 645501-646000 925 741001-742000 992 791301-792600 97. 849001-850000 975 538001-543000 940 B645501-646ooo 999 Ball 742001-743000 974 792601-900 972 850001-300 992 543001-544000 927 646001-647000 926 743001-300 975 792901-793700 992 850301-800 990 544001-200 93' B646001-6470oo 999 Ball 743301-400 993 793701-900 990 850801-851000 972 544201-545000 926 647001-648000 940 743401-744000 975 793901-794000 992 851001-400 993 545001-546000 925 B647001-648ooo 999 Ball 744001-500 97' 794001-200 972 851401-852000 975 546001-547000 92. 648001-649000 940 744501-745000 992 794201-795000 97. 852001-853000 992 547001-548000 926 B648001-649OQO 998 Ball 745001-747000 975 795001-796400 992 853001-854000 97. 548001-549000 999 B649001-650000 998 Ball 747001-700 97. 796401-800 972 854001-600 950 549001-55 1000 9'6 B650001-651ooo 999 Ball 747701-748000 972 796801-797200 97. 854601-900 952 551001-553000 944 651001-652000 940 748001-749500 992 797201-500 954 854901-855100 960L 553001-555000 940 B651OO1-652000 998 Ball 749501-750000 974 797501-798000 97. 855101-856000 950L 555001-556000 936 652001-652700 924 750001-100 961 798001-500 990 856001-857840 975 556001-558000 92' B652oo1-652700 998 Ball 750101-200 961 798501-800 972 857841-858000 975L 558001-560000 925 652701-652800 924 750201-700 950 798801-799000 97' 858001-500 97. 56000 1-561 000 999 652801-652900 927 750701-751000 952 799001-200 95' 858501-859000 972 561001-562000 926 652901-653000 937 751001-752000 960 799201-600 992 859001-860000 97. 562001-564000 92. 653001-655000 940 752001-500 952 799601-800000 9.. 860001-862300 992 564001-565000 926 B653001-655000 999 Ball 752501-753000 950 800001-802000 97. 862301-400 95. 565001-568000 940 655001-655200 92. 753001-500 952 802001-200 964 862401-500 972 568001-569000 936 B655001-655200 999 Ball 753501-754000 950 802201-2 972 862501-600 954 569001-571000 92. 655201-656000 924 754001-100 960 802203-300 95' 862601-800 972 571001-576000 9'0 656001-657000 926 754101-500 952 802301-500 972 862801-863000 97. 576001-200 942 657001-659000 927 754501-755000 960 802501-803700 97. 863001-864000 992 576201-578000 940 659001-660000 925 755001400 992 803701-804200 95. 864001-865000 975 578001-580000 92. 660001-661000 927 755401-500 974 804201-806000 97. 865001-866000 992 580001-582000 926 661001-662QOO 924 755501-700 972 806001-807000 975 866001-600 974 582001-584000 925 662001-664000 940 755701-900 974 807001-500 993 866601-700 954 58400 1-585000 927 664001-666000 924 755901-756000 972 807501-808800 975 866701-867000 972 585001-587000 999 666001-667000 940 756001-757000 974 808801-809000 993 867001-868000 975 587001-592000 940 667001-668000 9'1 757001-300 975 809001-500 97. 86800 1-869000 992 592001-593000 926 66800 1-669000 926 757301-500 993 809501-600 972 869001-870000 975 593001-594000 924 669001-670000 999 757501-758000 975 809601-8 10000 97. 810001-872000 992 594001-601000 940 670001-100 937 758001-100 972 8 10001-300 990 872001-200 993 B60000 1-60 1 000 999 Ball 670501-673000 925 758 101-75!)OOO 992 810301-812000 97. 872201-874000 975 601001-601800 926 673001-675000 926 759001-760000 975 812001-700 992 874001-800 974 B601001-6018OO 999 Ball 675001-677000 940 760001-400 992 812701-8 13000 97. 874801-875000 975 601801-602000 93' 677001-678000 924 760401-600 972 813001-814000 974P 875001-300 952 B601801-602000 999 Ball 678001-679200 927 760601-800 97. 814001-800 974L 875301-876000 975 602001-603000 926 679201-680000 926 760801-761000 992 814801-815900 992 876001-600 993 B602oo1-603ooo 999 Ball 680001-685000 924 761001-400 975 815901-816000 974L 876601-877000 975 603001-604000 926 685001-687000 940 761401-600 993 8 1600 1-817000 974P 877001-400 992 B603001-604oo0 999 Ball 687001-688000 925 761601-762000 975 8 17001-819000 974L 877401-700 975 604001-605000 926 688001-689000 946 762001-200 992 819001-820000 974P 877701-878000 993 B604001-605000 999 Ball 689001-694000 940 762201-300 972 820001-821500 974L 878001-879400 975 605001-606000 925 694001-696000 92. 762301-763000 974 821501-822000 990L 88ooo1..{)00 992 B605OO1-606000 999 Ball 696001-697000 941 763001-300 993 822001-700 992L 880601-882400 974 606001-607000 925 697001-700000 924 763301-600 973 822701-823000 974L 882401-883400 992 B606001-6070oo 999 Ball 700001-702000 974 763601-764000 975 823001-824000 974P 883401-884100 974 607001-608000 925 702001-703800 992 764001-300 992 824001-826000 975P 884101-885300 992 B607oo1-6080oo 999 Ball 703801-704000 990 764301400 972 826001-500 975L 885301-886000 974 608001-613000 92. 704001-400 992 764401-765000 974 826501-827000 993 886001-887000 992 B608oo1-613000 999 Ball 704401-705000 990 765001-300 992 827001-828000 975P 887001-300 974 613001-614000 925 705001-700 972 765301-767000 97' 828001-829000 974L 887301-890300 992 B613OO1-614ooo 999 Ball 705701-706000 97' 767001-600 992 829001-830000 974P 890301-891000 974 614001-616500 924 706001-707000 990 767601-800 972 830001-500 990L 891001-600 992 B614001-616500 999 Ball 707001-800 972 767801-768000 97. 830501-831000 992L 891601-892200 978 616501-617000 93. 707801 708000 990 768001-769000 975 831001-100 954P 892201-896200 992 B6165Q1-617ooo 999 Ball 708001-709500 975 769001-700 992 831101-200 972P 896201-897800 974 617001-619000 926 709501-710000 973 769701-770000 972 831201-500 954P 897801-898000 972 B617oo1-619ooo 999 Ball 710001-800 993 770001-100 97. 831501-832000 974P 898001-899100 992 619001-620000 927 710801-711000 991 770101-771200 992 832001-400 974L 899101-500 978 B619001-620000 999 Ball 711001-300 973 771201-400 972 832401-833000 992L 899501-900000 97. 620001-622700 940 711301-712000 975 771401-772000 974 833001-834000 990L 900001-902000 940 B62oo01-622700 999 Ball 712001-600 993 772001-773000 975 834001-600 974P 902001-904000 926 622701-623000 9.2 712601-713000 991 773001-800 992 834601-800 974L 904001-906000 924 B622701-623000 999 Ball 713001-714900 975 773801-774000 972 834801-835000 974P 906001-914000 940 623001-624000 9.1 114901-715000 991 774001-775000 975 835001-600 992L 9 14001-916000 926 B623001-624000 999 Ball 715001-716000 993 775001-500 952 835601-800 990L 916001-917000 927 624001-625000 936 716001-100 972 775501-776000 950 835801-836000 974L 917001-919000 925 B624001 625000 999 Ball 716101-717000 974 776001-300 973 836001-500 974P 919001-921000 940 625001-626000 925 117001-200 991 776301-700 993 836501-900 954P 921001-923000 924 14
SERIAL NUMBERS AND GRADES Grade Grade G rade Grade Grade 923001-500 999 1052001-500 972P 1155001-200 994P 1270001-1271700 9SOP 1356001-1357000 974P 923501-924000 925 1052501-900 954 1155201-500 994L 1271701-1272000 974P 1357001-1359800 992L 924001 926000 940 1052901-1053000 974 115600 1-1158000 996L 1272001-1274000 996L 1359801 1361000 996L 926001-100 927 1053001-1054000 992 1158001-1160000 974P 1274001-.500 993L 1361001-1362000 992L 927001-929000 92. 1054001-1056000 974 1160001-1 162000 992L 1274501-700 992L 1362001-600 974P 929001-P33000 924 1056001-1057000 975 1162001-500 993L 1274701-1275000 992L 1362601-1363000 956P 933001-93 5000 925 1057001-1061300 992 1162501-1164000 992L 1275001-1276000 972L 1363001-1364000 992L 935001-937000 92. 1061301-1062300 972 1164001-1166000 974P 1276001-1277000 974L 1364001-1365000 975P 937001-939000 940 1062301-1066000 992 1166001-1167000 974L 1277001-1278000 992L 1365001-800 956P 939001-941000 924 1066001-1068000 974 1167001-1168000 956P 1278001-1279000 97SP 1365801-1367000 974P 941001-944000 940 1068001-1069000 975 1168001-1169000 975P 1279001-1280000 974P 1367001-1369400 992L 944001-949000 92. 10 69001-1070000 974 1169001-1170000 974P 1280001-1281000 992L 1369401-1370000 996L 949001-952000 925 1070001-1071000 992L 1170001-1174000 956P 1281001-800 974P 1370001-1371000 974L 952001-958000 924 1071001-1073000 975P 1174001-1176000 974P 1281801-1282000 956P 1371001-600 996L 958001-960000 926 1073001-1075000, 992 1176001-1177000 992L 1282001-1284000 996L 1371601-1373000 992L 960001-968000 940 1075001-1076200 974L 1177001-1178000 956P 1284001-1285000 992L 1373001-1374000 975P 968001-970000 92. 1076201-700 972L 1178001-1179000 974P 1285001-1286000 956P 1374001-1375000 992L 970001-971700 924 1076701-1077000 978L 1179001-118 1000 996L 1286001-1288000 978L 1375001-1376000 950L 971701-972000 948 1077001-1079000 974P 1181001-1182000 992L 1288001-500 993L 1376001-1377000 992L 972001-973000 924 1079001-1080000 992L 1182001-11 83000 996L 1288501-1289100 992L 1377001-1378300 974P 973001-974000 936 108000 1-1 00 952L 1183001-1184400 974P 1289101-700 990L 1378.101-1379000 956P 974001-975400 92. 1080101-200 960L 1184401-1 185400 956P 1289701-1290000 992L 1379001-1 3 80200 972L 975401-25 Spec. 926 1080201-400 994L 1185401-1186000 974P 1290001-1291500 974P 1380201-1381000 978L 975426-976000 924 1080401-108 1000 950L 1186001-1187000 992L 1291501-1292000 992P 1381001-500 956P 976001-979000 940 '108 1001-1082000 978L 1187001-1188000 99.L 1292001-1297000 992L 1381501-1383000 974P 979001-100 942 108200 1-400 993L 1188001-1189000 992L 1297001-1298000 974P 1383001-13 84000 992L 979101-98 1000 940 1082401-1083000 973L 1189001-1190000 974P 1298001-1299000 992L 1384001-1386100 974P 98 1001-982000 948 1083001-1084000 990L 119000 1-1192000 996L 1299001-1300000 975P 1386101-13 87000 956P 982001-984000 924 1084001-1085000 992L 1192001-1193000 975P 1300001-1301000 974P 1387001-1388000 992L 984001-986000 940 1085001-1086000 992L 1193001-1 194000 974P 1301001-1302000 974L 1388001-400 978L 986001-987000 946 1086001-1088QO(l 974P 1194001-1195000 956P 1302001-500 992L 1388401-1389000 978L 987001-988000 936 1088001-1091000 992L 1195001-1196000 974P 1302501-1303000 990L 1389001-300 956P 988001-992000 940 1091001-200 978L 1196001-1199000 992L 1303001-500 972L 1389301-1390000 9S6P 992001-996000 924 1091201-1092000 974L 1199001-1201000 9NP 1303501-1304000 972P 1390001-1391000 992L 996001-999998 940 1092001-1093000 992L 1201001-1202000 975P 1304001-1305000 978L 1391001-500 956P 999999-1000000 947 1093001-1095000 974P 120 2001-1203000 992L 1305001-1306000 956P 1391501-1392000 974P 1000001-1000300 972 1095001-1096000 992P 1203001-1204000 974P 1306001-1307000 974P 1392001-1393000 992L 1000301-1003000 992 1096001-400 974L 1204001-500 956P 1307001-1308500 992L 139300 1-1394000 974P 1003001-1004000 974 1096401-1097000 974P 1204501-1206000 974P 1308501-1309000 903L 1394001-1396000 992L 1004001-900 992 1097001-1098000 992L 1206001-1207000 992L 1309001-1310000 9UL 1396001-500 972L 1004901-1007100 974 1098001-400 975P 1207001-1210000 974P 1310001-1311000 972L 1396501-1398000 974L 1007101-1008300 992 1098401-1099000 975L 1210001-1212000 992L 13 11001-1312000 992L 1398001-400 974P 1008301-1009500 97. 1099001-600 993L 1212001-1213000 974P 1312001-800 974P 1398401-1399000 9S6P 1009501-1010700 992 1099601-1100000 975P 1213001-500 996L 1312801-1313000 956P 1399001-1400000 992L 1010701-1011200 972 1100001-1104000 992L 1213501-1214000 992L 1313001-1317000 992L 1400001-1401000 93. 1011201-1012700 97. 1104001-1105000 974P 1214001-1 2 14600 993L 1317001-1318000 950P 1401001-1403000 924 1012701-1013000 992 1105001-1106000 992L 1214601-1215000 975P 1318001-1321000 992L 1403001-1409000 940 1013001-1015000 978 110600 1-500 978L 1215001-1216000 974L 1321001-300 990L 1409001-500 94. 1015001-300 974 1106501-1107000 972L 1216001-1219000 992L 1321301-1322000 992L 1409501-1410000 940 1015301-1016000 992 1107001-1109000 992L 1219001-1220000 974P 1322001-700 974L 1410001-1414000 92. 1016001-300 975 1109001-1111000 972L 1220001-1 221000 992L 1322701-1323000 972L 1414001-300 941 1016301-600 973 1111001-1112000 974L 1221001-1223500 974P 1323001-1324000 992L 1414501-1415000 925 1016601-1018000 993 1112001-1113000 974P 1223501-1224000 956P 1324001-1325000 996L 1415001-1417000 92' 10 1800 1-1020000 992 1113001-1116000 992L 1224001-1227000 992L 1325001-1326500 975P 1417001-1419000 940 1020001-1022600 950 1116001-900 974P 1227001-1228000 972L 1326501-1327000 993L 141900 1-1420000 924 1022601-1023000 952 1116901-1117000 974L 1228001-700 992L 1327001-300 956P 1420001-1421000 940 1023001-700 992 1117oo1-1119000 992L 1228701-1229000 990L 1327301-1329000 974P 1421001-1422000 924 1023701-1024500 974 111900 1-1120000 978L 122900 1-500 956P 1329001-1330000 992L 1422001-1424000 940 1024501-600 97. 1120001-1122000 992L 1229501-1230000 974P 1330001-1331300 974L 1424001-1428000 924 1024601-1025000 972 1122001-1123000 974P 1230001-1231000 974L 1331301-800 972L 1428001-1430000 940 1025001-1027000 975 1123001-.500 972P 123 1001-1232000 992L 1331801-1332000 978 L 1430001-200 924 1027001-400 993 1123501-1125000 974P 1232001-1233000 974P 1332001-1334000 992L 1430201-400 948 1027401-1029600 975 1125001-1127000 992L 1233001-1236000 992L 1334001-400 974P 1430401-1431000 92. 1029601-1030000 973 1127001-1128000 972L 1236001-500 974P 1334401-1335000 956P 143 1001-1433000 940 1030001-1032000 992 11 28001-1129000 974L 1236501-1237000 956P 1335001 300 978L 1433001-1438000 924 1032001-1033000 974 1129001-1130500 974P 1237001-500 996L 1335301-1336000 972L 1438001-500 92. 1033001-200 972 1130501-1131000 956P 1237501-1238000 992L 1336001-1337000 992L 1438501-1439500 924 1033201-800 954 1131001-1132000 992L 1238001-1239000 956P 1337001-1338200 996L 1439501-1440000 92. 1033801-1035300 974 1132001-1133000 990L 1239001-124 1000 992L 1338201-1339000 996L 1440001-1441000 940 1035301-600 972 1133001-1134000 978L 1241001 1242000 975P 1339001-1340000 956P 1441001-1442000 924 1035601-1036000 97. 1134001-1135000 972L 1242001-400 974L 1340001-1341000 992L 1442001-500 92. 103600 1-300 972 1135001-1137000 992L 1242401-1 243000 972L 1341001-300 972L 1442501-1444000 924 1036301-800 954 1137001-1138000 956P 1243001-500 996L 1341301-500 974L 1444001-1445000 940 1036801-1037000 992L 113800 1-1139000 956P 1243501-1 244000 992L 1341501-1342000 978L 1445001-1447000 92' 1037001-1038000 974 1139001-1140000 978L 1244001-1245000 974P 1342001-1343000 992L 1447001-1448200 940 103 8001-1039000 992 1140001-1141000 972L 1245001-1246000 992L 1343001-400 956P 1449001-1450500 924 1039001-200 972 1141001-1142000 956P 1246001-300 974P 1343401-1344000 974P 1500001-600 974P 1039201-500 978 1142001-500 974P 1246301-800 956P 1344001-1345000 992L 1500601-1501200 956P 1039501-1040300 974 1142501-1145000 974L 1246801-1 247000 974L 1345001-600 974L 1501201-1502000 974P 1040301-1041000 992 1145001-1146000 97SP 1247001-1248000 992L 1345601-1346000 972L 1502001-1503000 993L 1041001-1042000 974 1146001-500 956P 1248001-1249700 974P 1346001-1348000 975P 150300 1-1504000 996L 1042001-700 992 1146501-1149000 974P 1249701-1250000 956P 1348001-1349000 974P 1504001-500 974L 1042701-1043000 972 114900 1-1150000 974L 1250001-1252000 983 1349001-1350000 992L 1504501-1505200 972L 1043001-700 978 1150001-600 900L 1252001-1253000 985 135000 1-600 972L 1505201-700 978L 1043701-1044000 992 1150601-115 1800 952L 1253001-1257000 983 1350601-1351000 974L 1505701-1506000 974L 1044001-1045000 974 115 1801-1152000 952P 1257001-900 985 1351001-1352000 993L 1506001-1507000 975P 104500 1-1 046000 992 1152001-900 950P 1260001-970 Chro,* 1352001-1352300 974L 1507001-1508000 992L 1046001-1047000 975 1152901-1153200 952P 1260971-1 265000 1352301-800 978L 1508001-400 974P 1047001-1048000 9 74L 1153201-300 1265001-1266000 956P 1352801-1353000 974L 1508401-1509000 956P 1048001-1049000 992 1153301-500 994P 1266001-1267000 974P 1353001-500 972P 1509001-1510000 992L 1049001-500 990 1153501-800 994L 1267001-1268200 9 78L 1353501-1354200 956P 1510001-1511000 974L 1049501-1051000 992 1153801-1154000 960L 1268201-1269000 978L 1354201-700 992P 15 11001-1512000 975P 1051001-200 975 1154001-500 950L 1269001-600 992L 1354701-1355000 974P 1512001-1513200 992L 1051201-1052000 993 1154501-1155000 950P 1269601-1270000 992L 1355001-1356000 992L 1513201-600 992P *Hamllton 36 size chronometer watch 15
r SERIAL NUMBERS AND GRADES Grade Grade Grade Grade Grade 1513601-1514000 992L 1637001-1638000 974P 1861001-1863000 900 2393001-2395000 974P 2900001 2911500 979 1514001 200 956P 1638001-1642800 992L J 863001-700 920 2395001-2397000 992L 2911601-2931900 979F 1514201-1515000 974P 1642801-1643000 992P 1863701-1864300 900 2397001-2398000 974L 3000001-3002300 922 1515001-1516000 992L 1643001 1644000 992L 1864301-1865000 920 2398001-2401000 992L 3002301-3002500 922M.P. 1516001-1517000 974P 1044001-1646000 974L 1865001-500 914 2401001-2402000 {)74P 3002501-3003800 922 1517001-1520000 992L 1646001-1648000 972L 1865501-1870300 910 2402001-2407000 90ZL 3003801-3004000 922M.P. 1520001-1521200 974L 1648001-1649000 992L 1870301-1871500 914 2407001-2409000 974P 3004001-3006100 922 1521201-1522000 978L 1649001-1652000 974P 1871501-1875100 910 2409001-2413000 992L 3006101-3006300 922M.P. 1522001-600 974P 1652001-1653000 9SOL 1875101-600 914 2413001-2414000 974P 3006301-3008000 922 1522601-1525000 956P 1653001-1654000 956P 1875601-1876500 910 2414001-2415000 974L 3008001-3008600 922M.P. 1525001-1527000 996L 1654001-1657000 974P 1876501-1877500 9 14 24'llool-2418ooo 992L 3008601-3010000 922 1527001-1528000 992L 1657001-1660000 992L 1877501-1878700 910 2418001-2420000 974P 3010001-3010500 922 1528001-1531000 974P 1660001-1661000 978L 1878701-1880000 914 2420001-2422000 992L 3010501-3010700 922M.P. 1531001-1533000 992L 1661001-1663000 974P 1880001-300 920 2422001-2423000 974P 3010701-3011900 922 1533001-600 974P 1663001-1664000 974L 1880301-1881500 900 2423001-2432000 992L 3011901-3012500 922M.P. 1533601-1534000 956P 1664001-1665000 950L 1881501-700 920 2432001-2433000 {)74P 3012501-3013100 922 1534001-100 975P 1665001-1666000 974P 1881701-900 900 2433001-2434000 992L 3013101-3013700 922M.P. 1535101-200 975P 1666001-1667000 956P 1881901-1882900 920 2434001-2435000 974P 3013701-3015700 922 1535201-600 975P 1667001-1669000 974P 1882901-1885000 900 2435001-2437000 992L 3050001-3054800 902 1535601-1536000 993L 1669001-1670000 978L 1885001-1887400 910 2437001-2438000 974P 3054801-3056000 922 1536001-1537000 972L 1670001-1671000 974P 1887401-1888600 914 2438001-2442000 992L 3056001-3060800 902 1537001-1538000 992L 1671001-300 992L 1888601-1891000 910 2442001-2445000 974P 3061001-3065100 904 1538001-800 956P 1671301-900 992P 1891001-1892200 914 2445001-2451000 992L 3100001-3133800 916 1538801-1539000 974P 1671901-1672000 992L 1892201-1894600 910 2451001-2453000 974P 3 135001-3152700 918 1539001-1540000 992L 1672001-1676000 974P 1894601-1895800 914 2453001-2455000 992L 3200001-3460900 912 1540001-500 992P 1676001-1678000 992L 1895801-1899000 910 2455001-2456000 974P 4000001-4447201 98711"' 1540501-1541000 992L 1678001-1679000 974P 1899001-300 900 245600 1 2457000 gg2l 4447301-4523000 987E 1541001-1542200 974P 1679001-1681000 974L 1899301-1900000 920 2457001-2458000 950L A-OOI to A-8900 980B 1542201-800 956P 1681001-1682000 974P 1900001-400 910 2458001-2459000 974L I B-OOI to IB- 185oo 999B 1542801-1543000 974P 1682001-1683000 956P 1900401-1902100 914 2459001-2461000 992L 2B-OOi to 2B-700 999B 1543001-1544000 996L 1683001-1685000 974P 1902101-1907000 910 2461001-2462000 974L 2B 701 to 2B-800 950B 1544001-1545000 992L 1685001-1686000 992L 1907001-1909000 914 2462001-2464000 992L 0-001 to 0-308100 092B 1545001-400 978L 1686001-1688000 974P 1909001-1910000 910 2464001-2466000 074P E-OOI to E 1l4000 989 1545401-1546000 974L 1688001-500 978L 1910001-500 920 2466001-2468000 992L E-1l4001 to E-140400 1546001-1548000 992L 1689001 600 975P 1910501-1911000 900 2468001-2469000 974P 989E 1548001-600 974L 1690001-1691000 956 1911001-1913000 920 2469001-2472000 992L F-I01 to F -57600 995 1548601-1549000 972L 1691001-1693000 992L 1913001-1914000 900 2472001-2473000 974P F-57601 to F-59850 995A 1549001-1550000 974P 1693001-1696000 956P 1914001-1920000 910 2473001-2474000 992L F-59851 to F-62000 995 1550001-500 972P 1696001-1699000 992L 1920001-1922000 920 2474001-2475000 974P F-62oo1 to F -63ooo 995A 1550501-1552000 974P 1699001-1703000 974P 1922001-1924000 910 2475001-2476000 992L F-63oo1 to F-63800 995 1552001-1555000 992L 1703001-1704000 992L 1924001-1925000 900 2476001-2477000 974P F- 63801 to F-2862oo 995A 1555001-1557000 993P 1704001-1705000 956P 1925001-1936000 910 2477001-2490000 992L 0-001 to 0-13600 980 1557001-800 972L 1705001-1706000 974P 1936001-1937000 920 2490001-2492000 974L 0-13601 to 0-14600 1557801-1558000 974L 1706001-1707100 992L 1937001-900 900 2492001-2504000 992L 980 & 980A 1558001-500 956 1708001-1714000 992L 1940001-1941000 914 2504001-2505000 9SOL 0-14601 to 0-44500 980 1558501-1559700 956P 1714001-1715000 974P 1941001-1949000 910 2505001-300 9SOL 0-44501 to G-45OOO 9SOA 1559701-1560000 974P 1715001-1717000 992L 1949001-1950000 914 2506001-2526000 992L 0-45001 to 0-47400 980 1560001-1561000 975P 1717001-800 956 1950001-1962000 910 2526001-2528000 974P 0-47401 to G48400 980A 1561001-1563000 992L 1718001-1750000 992L 1962001-1963000 914 2528001-2533000 992L 048401 to 0-58200 980 1563001-1565000 978L 1750001-1761000 900 1963001-1975000 910 2533001 2534000 974P 0-58201 to 0 58700 9S0A 1565001-1567000 992L 1761001-1765000 914 1975001-1976000 914 2534001-2535000 992L 0-58701 to 0-61600 980 1567001-1568000 974L 1765001-1767000 920 1976001-1980000 910 2535001-2536000 974P 0-61601 to 0-62500 980A 1568001-1569000 992L 1767001-1768000 914 1980001-1981000 914 2536001-2537000 974L 0-62501 to 0-67500 980 1569001-1571000 972L 1768001-1769000 900 198 1001-1988500 910 2537001 2538000 974P 0-67501 to 0-68600 980A 1571001-1572000 974P 1769001-1770000 920 1989001-400 9 14 2538001-2539000 974L 0-68601- to 0-651700 980 1572001-1573000 975P 1770001-1778200 914 2000001-2001700 988 2539001-2542000 974P H-OOI to H-I0oo 921 1573001-1575000 974P 1778201-1779000 910 2001701-2002400 986 2542001-2543000 992L H-l001 to H -1800 1575001-400 950L 1779001-1780000 920 2002401 800 988 2543001-2545000 974P 400 & 921 1575401-1576000 950P 1780001-1782000 910 2002801-2003100 986 2545001-2547000 992L H-IS01 to H-2000 921 1576001-1577000 950L 1782001-500 920 2004001-2035000 986 2547001-2548400 974P 8-2001 to H-28oo 1577001-1578000 975P 1782501-1783000 900 2035001-2037200 981 2548401-2548600 974L 400 & 921 1578001-1580000 992L 1783001 1808000 910 2040001-2064900 986 2548601-2548700 {)74P H-2801 to H-3500 400 1580001-1581200 974L 1808001-18 10000 914 2100001-2191300 986A 2548701-2550000 974L H -8501 to H-45200 921 1581201-1582000 956P 18 10001-1811000 910 2200001-2248000 987 2550001-2551000 992L 8-50001 to H-575oo 401 1582001-1583000 974P 18 11001-1813000 900 2248001-2300000 987F 2551001-2552000 974.L J-OOI to J -6190oo 982 1583001-1584000 992L 1813001-1818000 910 2300001-2311000 992L 2552001-2555000 {l92l M-OOI to M-1678oo 982M 1584001-1585000 978L 1818001-1819000 914 2311001-2312000 974L 2555001-2555600 974L N-OOl to N-532200 721 1585001-1586000 972L 1819001-1821000 910 2312001-2321700 992L 2555701-2557000 974L 0-1 to 0-486300 987A 1586001-1587000 992L 1821001-1822000 914 2321701-2323000 974L 2558001-2560000 992L R"'{)OI to R-3600 92" 1587001-500 992P 1822001-1827000 910 2323001-2326000 992L 2560001-2561000 974L S-OO I to S-100OO 950B 1587501-1589000 992L 1827001-600 914 2326001-2327000 974P 2561001-2563000 992L SS-OO I to SS-874OO 987S 1589001-500 956P 1827601-1829100 910 2327001-2333000 992L 2563001-2564000 974L T-OOI to T-783000 911 1589501-1590000 974P 1829101-500 914 2333001-2336000 974P 2564001-2566000 992L V-OOI to V-127200 911M 1590001-1591000 974L 1829501-1830000 910 2336001-2338000 992L 2566001-2566800 974L X-OOI to X -1797OO 917 1591001-1592000 992L 1830001-1831000 900 2338001-2339000 974P 2567001-2581000 992L Y-OOl to Y-273400 747 1592001-1593000 974P 1831001-1832000 920 2339001-2340000 974L 2581001-2583900 992E OY-OOI to OY-86100 748 1593001-1595000 992L 1832001-700 910 2340001-2341000 974P 2583901-2584300 992L O...{) I A to 167400-A 750 0-010 to 44200-0 751 1595001-200 974P 1832701-1833300 914 2341001-2346000 992L 2584301-2596000 992E 1595201-900 956P 1833301-1834500 910 2346001-2347000 974P 2596001-2597000 974L 1595901-1596000 974P 1834501-1835'400 9 14 2347001-2356000 992L 2597001-2608000 992E 1596001-1611000 992L 1835401-1836900 910 2356001-2358000 974P 2608001-2608800 974L 1611001-1612100 974P 1836901-1837400 914 2358001-2364000 992L 2609001-2611000 992E 1612101-1613000 956P 1837401-1839000 910 2364001-2365000 974P 2611001-2611400 950L 1613001-600 996L 1839001-500 914 2365001-2374000 992L 2611401-2613000 950E 1614001-900 956P 1839501-1844700 910 2374001-2375000 974P 2613001-2618000 092E 1614901-1615000 974P 1844701-1845700 914 2375001-2378000 992L 2618001-2619000 950E 1615001-1625000 992L 1845701-1848300 910 2378001-2380000 974L 2619001-2631000 992E 1625001-200 950L 1848301-1849500 914 2380001-2383000 992L 2631001-2631600 950E 1625201-1626000 952L 1849501-1851900 910 2383001-2384000 950L 2631801-2632000 950E 1626001-1627000 974P 1851901-1853100 914 2384001-2385000 992L 2632001-2639000 992E 1627001-1633000 992L 1853101-1856800 910 2385001-2396000 974P 2639001-2641000 950E 1633001-1635000 950L 1856801-1857900 914 2386001-2390000 992L 2641001-2649000 992E 1635001-1636000 992L 1857901-1860300 910 2390001 2391000 974P 2649001-2650600 950E 1636001-1637000 956P 1860301-1861000 914 2391001-2393000 992L 2651001-2655300 992E 16
INTRODUCTION TO MATERIALS LISTS HAMILTON WATCHES EASILY REPAIRED WITH GENUINE MATERIALS Genuine Hamilton materials are identical with those used in the original model of any given size or grade of Hamilton watch. Repair of Hamilton watches with genuine material, therefore, is a relatively simple, foolproof operation and makes it possible for the watchmaker to restore any Hamilton to the fine mechanical condition it was in when it left the factory. Genuine Hamilton materials are packaged at the factory and each envelope or container is plainly marked with essential identifying data. For definitions of terms and explanations of abbreviations employed in the following pages of materials lists refer to the Glossary of Terms and Abbreviations on page 2. All hole jewels cataloged in the following materials lists, unless they are marked unset, are jewels in settings. To order Hamilton material secure the movement grade number which is engraved on one of the bridges of virtually all Hamilton movements, then consult the index on page 2. Hamilton movements which do not have grade numbers engraved on them do carry serial numbers which can be checked against the serial numbers listed on pages 12 to 16 to secure the grade number. All materials are classified by watch size and grade on pages indicated in the index. When the material desired has been located under the appropriate grade, the order can be prepared. Always use catalog number and part name on material orders. All orders for Hamilton material should be sent to Hamilton material jobbers. If Hamilton material jobbers in your area are not known, write the Sales Department of this Company for a list of such jobbers. ALWAYS USE GENUINE HAMILTON MATERIAL
18 SIZE MOVEMENTS 924 925 926 GRADES 927 930 928 931 929 932 933 934 935 Spedal Note: Grode 924: Two Piece Pallet and Fork be/ore 655801 Solid Pallet and Fork after No, 655800 G rade 926: Two Piece Pallet and Fork be/ore 673001 Solid Pallet ami Fork after 613000 Grada 927: Two Piece Pallet and Fork before 658501 Solid Pallet and Fork ofter 658500 Co. 22 Arbor, barrel 129 Arbor, pallet. 2 piece pallet and rork 255 Arbor. pallet, soud pallet and fork 57 BalaDce. with screws 59 Balance (with screws) and Staff 243 Balance complete 104 Band, dust, O.F. 16 Darrel 17 Barrel and Arbor 71 Cap, hairspring etud 32 Click. after motif. 100000 34 Click, before 71Wf!t. 100001 76 Collet, hairspring 29 Huh, wlnding wheel MA Indell: 158 Jewel. balance upper 159 Jewel, balance lower 167 End. tone. balance upper 169 End.tone. balance lower 134 Jewel. center upper 135 J ewel. center lower 147 Jewel, escape or pallet, upper 149 Jewel, escape or pallet, lower 142 J ewel. fourth upper 143 Jewel, fourth lower 137 J ewel, third upper 138 Jewel. third lower 480 J ewel. roller 477 Stone, pallet, receiving 478 Stone, pallet, discharging (When order-ino, please state whether pallet stone is for solid or piece pallet and fork.) 68 Lever, regulator 15 Main.pring, Su. 20, refill 202 or Str. 21 69 Nut. regulator 92A 91 93A 375B 97 253 120 125 26 62 63 392 394 482 482B 193 207 208 179 205 185 192 200 190 194 Pallet, 2 p iece Fork, 2 piece Pallet and Fork, 2 piece Pallet and Fork, solid Pallet. Fork and Arbor, 2 piece "allet. Fork and Arbor, solld 1';nioo, cannon Pinion, escape Pinion, winding Regulator,O.F. Regulator, Htg. Roller Roller a.nd J ewel Pin Screw, balance Screw, meantime Screw. banking Screw. windjng bridge Screw. hairspring stud cap Screw, case Screw, click Screw, balance cock Screw, dial toot Serew, winding wheel hub Screw, index Screw, jewel, balance upper, balance lower, and lower plate 211 182 201 206 203 202 210 67 30 50 51 75 65 49 48 127 607 79 82 84 89 44 45 35A 42 38 40 27 itlaterial Serew, r egulator lever Serew, pillar Serew, shipper Serew, click s pring Screw, r egulator spring Screw, shipper spring Screw, yoke spring Serew, reator Shipper Spriog, click after movt. 100000 Spring, click, before motlt. 100001 Spring, hair Spri ng, regulator Spring, shipper Spring, yoke Staff, bala nce, S.R. Wheel, center staff and pinion Wheel. third and pinion Wheel, fourt h and pinion Wheel. escape and pinion Wb8e1. hour Wheel. minute Wheel, ratchet Wheel, setting Wbeel, winding Wbeel. Int-erwinding Yoke 936 937 GRADES 938 939 948 Special Note: Grade 936 fitted with: regular barrel before 98700] motor barrel after 987000.ingle roller before 426001 double roller after 426000 Grade 937 fitted with: regular barrel b efore 652901 motor barrel after 652900.ingle roller before 652901 double roller after 652900 22 236 129 255 56B 58A 58B 242A 242B 16 17 233 234 235 70 71 32 34 76 237 29 64A 158 159A 159 166 169 168 133 135 146 149 al Arbor. barrel Arbor, motor barrel Arbor, pallet, 2 piece pallet and fork Arbor, pallet, solid pallet and fork Balanc8. with screws Balance (with screws) and Staff, S.R. Balanc8 (with screws) and StafT, D.R. Balanee. complete, S.R. Balance, complete, D.R. Barrel Barrel and Arbor Barrel. mot-or Barrel, motor with arbor and nnt fitted Barrel, motor, complete with arbor, hub, nut and ratchet wheel tltted Ca p, regulator Ca P. hairspring stud Click, after motll. 100000 Click, before motlt. 100001 Collet, hairspring Hub. motor barrel Hub, winding wheel Ind8 l1' Jewel, balance upper Jewel. balance lower, D.R. Jewel, balance lower, S.n. Endetone, balance upper End.tone, balance lower, S.R. End.tone. balance lower, D.R. Jewel, center upper Jewel, center lower Jewel, escape upper Jewel, escape lower J8... el. fourth upper 143 146 149 136 ]38 479 475 476 68 15 232 2. 69 92 90 91 93 93A 375 95 97 252 120 125 26 60 61 62 63 391 396 395 392 394 481 482A 193 207 209 180 205 186 192 200 191 194 197 195 212 182 67 201 206 204 202 210 30 50 51 75 65 4. 48 126 127 607 7. 82 84 88 44 45 239 35A 42 38 40 27 Jewel, fourth lower Jewel. pallet upper Jewel. pallet lower Jewel. thlrd upper Jewel, tblrd lower Jewel. roller Ston8, pallet, r eceiving Stone, pallet, discharging ( When orderinu. please state whether pallet stone is for solid or piece pallet and fork.) Lever, regulator Main.pring. Btl'. 20}i. refill 202 or Btl'. 21 Main.pring.8tr. 18,, retlll 204 Nut, :h1.b. arbor Nut. regulator Pallet. 2 piece Fork, 2 piece, D.R. Fork, 2 piece, S.R. Pallet and Fork, 2 piece, D.R. Pallet and Fork, 2 piece, S.R. Pallet a.nd Fork, solid "allet, Fork and Arbor, 2 piece, D.R. Pallet, Fork and Arbor. 2 piece, S.R. Pallet, Fork and Arbor, solid Pinion, cannon Pinion, escape Pinion, winding Regulator, old stille, O.F. Regulator, old stille, Htg. Regulator. new style, O.F. Regulator, new stule, Htg. Roller, sma.li R oller, large Roller, large and jewel pin RoUer, single Roller. single and Jewel pin Sere... balance Screw. moantime Screw, banking Screw, winding bridge Screw. hairspring stud cap Screw, case Screw, click Screw, balance cock Sere... dia.l foot Serew, winding wheel hub Screw. index Screw, jewel, balance uppel' or 10wer,S.R. Sere... jewel, balance lower, D.R. Screw, jewel. plate Screw. regulator lever Screw, pillar Screw, regulator Screw, shipper Screw. click spring Screw. regulator spring Screw. shipper spring Screw, yoke spring Sbipper Spring, click, after motlt. 100000 Spring, click, before movt. 100001 Spring, hair Spring, regulator Spring. shipper Spring, yoke Staff, balance, D.R. Staff, balance, S.R. Stud. hairspring Wheel, center, staff and pinion Wheel, twrd and pinjon Wbeel. fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, motor ratchet Wheel, ratchet Wheel. setting Wbeel. winding Wheel, int(lrwinding Yok8 18
18 SIZE MOVEMENTS GRADES 940 941 942 943 Special Note: Grade 940 fitted wit/i: regular barrel btifore 594501 "lotor barrel after 594500 single roller bc!ore 512201 double roller ajter 512200 Two Piece Pallet and Fori. before NQ, 653001 Solid Pallet oncl Fork after 653000 Grade 941 fitted witli: regular barrel before 623001 motor barrel after 623000 aingle ro ller bcjore 4]9101 double roller after 419100 Grades 942 and 943: nlotor borrel on. all tnovemetlttl 22 236 128 254 56B 58A 58B 242A 242B 16 17 233 234 235 71 32 34 76 237 29 64A 158 159A 159 166 169 168 133 135 148 149A 160 162 141 143 136 13B 479 475 476 68 15 232 25 69 92 90 91 93 93A 375 94 96 251 120 124 26 60 61 62 63 391 396 395 392 394 481 482A 193 lucueried Arbor, barrel Arbor, motor barrel Arbor, pallet., 2 piece, pallet and fork Arbor, pallet, solid, pallet a nd fork Balance, with screws Balance (with screws) and Staff, S.R. Balance (with screws) a.nd Staff, D.R. Baillnce, complete, s.n. Balance, complete, D.R. Ba... el Ba... el a n d Arbor Barrel, motor Ba... el, motor, with arbor and nut fitted Ba... el, motor, complete with arbor, hub nut and ratchet fitted Cap, hairspring stud Click, used afler moll/. 100000 Click, used before morjt. 100001 Collet, hairspring Hub, motor barrel Hub, winding wheel Indel[ Jewel, balance upper Jewel, balance lower, D.R. Jewel, balance lower, S.R. Endetone, bajance upper End,tone, balance lower, B.R. End,tone, balance lower, D.R. Jewel, center upper Jewel, cenw lower Jewel, escape or pallet upper Jewel. escape Or pajlet lower End,tone, escape or pallet upper End,tone. escape or pallet lower Jewel, fourth upper J ewel, fourth lower Jewel, third upper Jewel, third lower Jewel, roller Stone, pallet, receiving Stone, pallet, discharging Lever, regulator Muin'pring, Str. 20, refill 203 Main,pring, Str. 18,, refill 204 Nut, mot-or barrel arbor Nut, regulator Pallet, 2 piece Fo.. k, 2 piece, D.R. Fork, 2 piece, S.R. Pallet and Fo.. k, 2 piece, D.R. Pallet and Fork, 2 piece, S.R. Pallet and Fork, solid Pallet, Fork a nd Arbor, 2 piece, D.R. Pallet, Fork and Arbor, 2 piece, S.R. Pallet, Fork and A.. bor, solid Pinion, cannon Pinion, escape Pinion, wiudiug R... gulator, old style. O.F. Regulato.., old Sl1l1e, Htg. Regulator, new sttlle, O.F. Regulator, new stille, ntg. Roller, small RuHer, large Holler, large. and Jewel pin Roller, single Holler, single. and jewel pin Screw. balance Sc.. ew, meantime Scr... w, banking c.. 207 209 180 205 186 192 200 191 194 197 195 212 182 67 201 206 204 202 210 30 50 51 75 65 49 48 126 127 607 7. B2 8' 87 44 45 239 35A 42 38 40 27 c.,. 23 236 129 128 255 254 56B 58B 242B 18 19 20 21 233 234 235 71 32 76 24 237 29 64 64A 158 Se.. ew, winding bridge Serew. hairspring stud cap Screw. case Screw, click Serew, balance cock Screw, dial foot Screw, winding wheel hub Screw, index Screw, jewel, balance upper or lower, S.R. Screw, jewel. balance lower, D.R, Screw, jewel. plate Screw. r egula.tor lever Screw, pillar Sc... w. regulator Sc.. ew, shipper Screw, click spring Screw, regulator sprlng Screw, shipper spring Screw, yoke spring Shippe.. Spring. click used after moot. 100000 Spring, c lick used before moot. 100001 Spring, bair Spring, regulator Spring, shipper Spring, yoke S taff, balance, D.R. Staff, balance. S.R. Wheel, center staff and pinion Whe... I, third and piolon Whe... I, fourth and pinion Wheel, escape and plnion Wheel. hour Wheel, minute Wheel, motor ratchet Wheel, ratchet Wheel. setting Wheel, winding Wbeel, interwind.lng Yoke GRADES 944 946 Spedol Note: Grade 9«fitted with: old.tyle motor borrel before 479001 n ew.tyle motor barrel offer 479000 Grode 946 fitted widh old.tyle motor barrel before No, 459801 new.tyle motor borrel offer "59800 Jltoterial Arbo.., motor barrel, old stille Arbor, motor barrel, new stl/le Arbor, pallet, 2 piece pallet and fork, Grade 944 Arhor, pallet, 2 piece pallet and fork, Grade 946 Arbor, pallet, solid pallet and fork, Grade 944 Arbo... pallet. soud pallet and fork, Grade 946 Balance with screws Balance (with screws) and Staff Balance, complete Barrel, motor, old stille Oi.e, motor Ba.rrel, mowr, old stille, with arbor and nut fitted Barrel, mowr, old stille, complete with arbor, hub, nut and ratchet wheel fitted Ba... l. motor, new stille Barrel. mot-or, new stille. with arbor and nut fitted Barrel, motor, new style, complete with arbor, bub. nut and ratchet fitted Ca p, hairspring stud Click Cullet, hairspring Hub, motor barrel. old stille liub, motor barrel, new style Hub, winding wheel Index. Grade 946 Index, Grade 944 Jewel, balance upper c.. 159 159A 166R 16. 168 130 132 133 135 146 148 149 149A 160 162 141 143 136 138 479 475 476 68 14 232 25 69 92 90 93 375 94 95 251 252 120 12. 125 2. 60 391 39. 39S 481 482A 193 216 207 209 180 205 186 192 213 200 191 194 197 195 182 67 201 206 204 202 210 30A 50 75 65 49 48 126 607 79 82 84 87 88 44 45 37 239A.2 38 39 40 27 27A Jewel, balance lower, S.R. Jewel, balance lower, D.R. Eudilltone, balance upper, Grade 946 End,tone. balance upper, Grade 944 End,tone. balance lower Jewel, barrel upper Jewel, barrel lower J... wel, center upper Jewel. center lower J... wel, escape, or pallet upper, Grade 944 Jewel, escape, or pallet upper, Grade 946 Jew... I, escape, or pallet lower, Grade 944 Jewel. escape, or pallet lower, Grade 946 End,tone. escape, or pallet upper, Grade 946 End,t.one, escape, or pallet lower, Grade 946 Jewel, fourth upper Jew... l. fourth lower Jewel, third upper Jewel. third lower lewel, roller Stone, pallet, receiving Stone, pallet, discharging L... er, regulator I\fainllpring, motor barrel, old stille Main,pring. motor barrel, new style N u t, motor barrel arbor Nut, regulator Pallet, 2 pjece Fork. 2 piece Iallet and Fork, 2 piece Pallet. and Fork, solid Pallet, Fork and Arbor. 2 piece, Grade 94' PlllJet, Fork and A.. bor. 2 piece, Grade 944 Pallet, Fork and Arbor, solld, Grade 946 Pallet, Fork and Arhor, solid, Grade 94-4- Pinion, cannon Pinion. escape. Grade 946 Pinion, escape, Grade 944 Iinion, winding Regulator Roller, small RoUe.., large RoUer, large and jewel pin Screw, balance Sc.. ew, meantime Screw, banking Screw, motor ra.tchet bridge Screw, winding brldge Serew. bairspring stud cap Screw, case Screw, click Screw, balance cock Screw, dial foot Screw, motor barrel hub Screw, winding wheel bub Screw, index Scr ew. balance upper jewel Screw, balance or barrel lower jewel Sc.. ew. plate or barrel uppilr jewel Screw, pillar Screw, regulator Screw, shipper Sc.. ew, click spring Screw, regujator spring Screw, sbip1)er spring Screw, yoke spring Shippe.. Spring, click Spring, hair Spring. regulator Spring, shipper Sp.. ing. yoke Staff. bala.nce, D.R. Stud. hairspring Wheel, center staff and pinion Whe... l. third and pinion Wheel, fourth and pinion Whe... 1 escape and pinion, Grade 946 Wheel. escape and pinion, Grade 944 Whe... I, hour Wheel, minute Wh... I. motor ratchet, Grade 944 Wheel, motor ratchet. Grade 946 Wh... el, setting Wheel. winding, Grade 944 Wh... I. winding, Grade 946 Wheel, interwlnding Yoke, Grade 944 Yoke, Grade 946 19
16 SIZE MOVEMENTS Ca 542 563 563A 432 432F 433A 433F 320 321 322 56B 379B 602 535 535A 536 S36A 328 557 058 71 33' 330A 325A 76 li43 560 561 315 559 465 466 472R 472 474 552 665J 554 447 449 458 459 461 461A 467R 469 454 455 457 462 463 464 454A 470 470A 469 450 451 453 479 475 476 414 414A 413 413A 415 534 544 562 375 376 950 GRADES 952 996 Arbor, motor barrel, Grades 950 and 95 before NQ. 848601 Arbor. motor barrel. Grades 960 and 961 after 846500 Arbor, motor barrel, Grade 998 Arbor, pallet, Grade 960 Arbor. pallet. friction, Grade 960 after 1677000 Arbol'. pallet. Grades 96 and 996 Arbor. pallet, friction, Grade 95 after /168 00 and Grade 998 after 1889000 Arbor. winding, P.S., Grades 960 and 96 before 1874401 Arbor, winding. lever set Arbor, winding, P.B.. Grades 960 and 96 after 1674400 B,.lanee, with screws Balanee (with screws) and Staff Balanc:e. complete Barrel. motor, Grades 960 and 96 Barrel, motor, Grade 998 Darrel, motor with arbor and nut fitted. Grades 950 and 9U Barrel, motor with arbor and nut fitted, Grade 996 Bridge. setting wheel Cap, motor ratchet, Grades 960 and 951 Cap, motor ra.tchet, Grade 998 Cap, hairspring stud Click, before 776001 CIi('lk, after 776000 Collet, hairspring Hub,, Grade:; 960 and 961 before 846601 Hub,, Grades 960 and 96' after 846600 Hub, motor barrel. Grade 998 Hub, wtnding wheel, two holes nub, winding wheel, one hole Jewel, balance upper Jewe l, balance lower End.tooe, balance upper, Grade 960 End. tone, balance upper, Grades 96t and 996 End.tone, balance lower Jewel, barrel upper. Grades g$o and 952 Jewel, barrel upper, Grade 996 J e wel, barre1lower Jewel, center upper Jewel, center lower Jewel, escape upper, Grades 96t and 998 Jewel, escape upper, Grade 960 Jewel, escape lower, Grades 96t and 996 Jewel, escape lower, Grade 960 End.tone, escape upper, Grade 960 End.tone, escape lower, Grade 960 Jewel, fourth upper, Grade 960 Jewel, fourth upper, Grade:; 961 and 996 Jewel, (ourth lower Jewel, pallet upper, Grade 960 Jewe l, pallet upper, Grades 96t and 996 Jewel, pallet lower, Grade 960 Jewel, pallet lower, Grade:; 96t and 996 End.tone Cap, pallet upper. Grade 960 End8tODe Cap, pallet upper, after No, 1676001 End.tone, pallet lower, Grade 960 Jewel, third upper, Grade 960 Jewel, third upper, Grades 96! and 996 Jewel. third lower Jewel, roller Stone, pallet. receiving Stone, pallet, djscharging (When ordering, please slate whether pallet slone is for solid or! piece pallet and fork.) Lever, clutch, Grades 96t and 996 Lever,, Grade 960 Lever, setting, Grades 96!! and 996 Lever, setting, Grade 960 Lever, &hop Main.pring, Str. 16, refllj 210 Nut, arbor Nut, hub, Grade 996 Pallet and Fork Pallet, Fork and Arbor, Grade 960 motor barrel, Ca 376A 323 425 429 430 326 381 asia 391 396 395 48l 482A 495 488 511 1361 209 485 '93 491 192 494A 512 5l2A 498 197 W7 518 523 523A 516 506 508 204 524 W8 529 401 565 331 417 418 421 386 383A 3830 420 420A 416 434 319 607 342 343 355 356 361 362 366 367 332 333 538 556 537 329 3130 564 564A Ca 601A 601 602 3W 604A 606 603 607 362 356 Pallet, Fork and Arbor. Grades 96! and 99B Pin, push Piuion, cannon Pinion, escape, Grade 960 Pinion, escape, Grades 96 and 996 Pinion, winding Regulator, Grade 960 Regulator. Grades 96f and 996 Roller, small Roller, large Roller, large and jewel pin Screw, balance Sctew, meantime Ser e w. banking Screw, bridge Screw, pallet bridge Screw, setting wheel bridge or ratehet cap Screw. hairspring stud cap SCtew, case Screw, click Screw, balance cock Screw, dial, for 4 rooted dial Sctew, dial, tor 3 footed dial Screw, winding wheel hub, two holes Screw, winding wheel hub. one hole Screw, jewel, balance or p late upper Screw, jewel, balance or pallet lower Screw, clutch and setting lever Screw, regulator, micrometric Screw, sbjpper, before 868001 Screw, shipper, after 868000 Screw, click spring Screw, c1uteh sprlng. lever set Screw, clutch spring, P.B. Scrow, regulator spring Screw, sbjpper spring, lever set Screw, setting lever spring, P.S. Sctew, yoke, lever set Shipper. before 868001 Shippet, after 868000 Spring, Click Spring, clutch, lever set Spting, clutch, P.S. Spring, clutch lever Spring, hair Spring, regulator and screw, Grades 960 and 96! Spring, regulator and screw, Grade 996 Spring, setting lever, Grades 962 and 996 Spring, setting lever, Grade 960 Spring, shipper, lever set Staff, balance. D,R. Stem, case Stud,h&1r8pring Wheel, center stajr and plnjon, Grades 960 and 996 Wheel, center staff and pinton, Grade 962 Wheel, third and pinion, Grade 960 Wbeel, third and pinion, Grades 96t and 996 Wheel, rourth and pinion, Grade 960 Wheel, tourth and pinion, Grades 96t and 996 Wheel, escape and pinjod, Grade 960 Wheel, escape and pinion. Grades 9U and 996 Wbeel, hour Wheel, minute Wbeel, ratchet, motor, Grade 960 and 96 Wbeel, ratchet, motor, Grade 996 Wheel, ratchet, motor, Grades 960 and 9.. Wbeel, setting W beel, winding Yoke. lever set, Grades 96! and 996 Yoke. lever set, Grade 960 MtUerial GRADE 950E Biliunce (with screws) a.nd Hub Balance (with screws) and StafT Balance, complete Collet, hairspring Hub, bala.nce Spring. hair Staff, balance Whecl, fourth and pinjon Wheel. third and pinion Ca 538 3130 Ca 683 610 680 611 60lA 612 613 681 682 616 617 618 387A 619 620 621 622 623 696 604A 624 692 6070 625 626 627 628 629 630 631 632 479 678 679 534B 35434 633 634 635 636 637 540 641 642 643 li44 481 645 482A 495 685 646 686 5097 649 650 6093 1366 651 518 652 6096 1798 687 " 68S 055 656 675 657 658 659 677 662 665 693 689 668 6042 691 670 673 695 Matflrla:J Wheel, ratchet Wbeel, winding All other procurable part.! same as Grade 950 Mater iof GRADE 950B Arbor, barrel Arbor, pallet Arbor, ratchet wheel Arbor, winding Balance (with screws) and Hub Balance (with screws) and StaIT Balance. complete Barre l Barrel and Arbor Click Clip, winding arbor Collet, hairspring End. tone Cap, balance upper End.toDe Cap, balance lower End. tone Cap. escape upper End. tone Cap, escape lower or pallet lower End.tone Cap, pallet upper Hook, mainspring Hub, balance wheel Jewel, balance upper or lower Jewel, barrel upper Jewel, barrel lower J e we l, center upper Jewe l, center lower Jewel, escape upper, or lower, or paliet lower J e wel, fourth upper or tbjrd upper Jewel, fourth lower or third lower Jewel. pallet upper Jewel, pallet stone, receiving Jewel, pallet stone, discharging J ewel, roller Lever, clutch Lever, shipper Main.pring, Str. 15 MM Mains pring, (standard) str.370, D ynavar Pallet and Fork Pallet, Fork and Arbor Pin, banking. before C4049 Pinion, cannon Pinion, escape Pinion, winding Regulator Roller, large Roller, large and jewel pin Roller, small Sere..., balance Screw, balance cock Screw, balance meantime Screw, ba.nking Screw. bridge Screw, pallet bridge Screw, case Screw, click Screw, dial (oot Screw, balance upper cap Screw, cap. balance lower, escape lower, escape upper. or pallet lower Screw, pallet upper cap Setew, shipper lever Screw, microroetric regulator Sere"w, regulator spring Screw, setting cap sprlng Screw, hairspring stud Screw, ratchet wheel Screw, winding wheel Spring, click SIIring, clutch lever Spring. bair, ElinMr Extra Spring. reg.ulator Spring, setting cap Staff, balance Wbee l, center and pinion W heel, escape and pinjon Wheel, third and pinion Wheel, rourth and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel. setting Wbeel, lower winding Wheel, winding 20
16 SIZE MOVEMENTS 954 962 GRADES 963 966 967 972 Special Note: 973 Grade 972 fitted with:.ingle Toller before 748001 double roller wter 74.8000 tke) piece pallet and/qrk bejore 724001 ljolid pollet ond/ark ofter 724(100 Grade 97Sjitted Ulith:.ingle roller before 711301 double roller after 711300 Co 324 433 433A 433F 320 321 322 S6B 379A 379B 574A 602 334 335 32S 316 71 330 330A 325A 76 315 559 465 466 472 474 447 449 458 461 455 457 463 464A 451 453 470 475 476 414 546 402 403 404 405 411 412 413A 545 415 547 317 317 410 92 90 371 375A 375 374 376A 425 430 A.rbor, barrel Arbor, pallet, 2 piece palle t and rork Arbor, pallet, solid pallet and fork Arbor, pallet. friction, 8Qlid pallet and fork, after N o. 168040 1 Arbor, winding. P.S. Arbor, winding. lever set Arbor, winding, P.S., after 1674401 Balance, with screws Balance (with screws) and Staff, s.n. BalaDce (with screws) and Staff, D.R. BalaDce. complete, S.R. Balance, complete, D.R. Barrel Donel and Arbor Bridge, setting wheel Cap, ratchet Cap, hairspring stud Click, bef ote 776001 Click, after 775000 Collet, hairspring Hub, winding wheel, 2 holes Hub, winding wheel, 1 hole Jewel, balance upper Jewel, balance lower End,tone, balance upper End, tone, balance lower Jewel, center upper Jewel, center lower J ewel, escape upper Jewel, escape lower Jewel, iourth upper Jewel. Courth lower Jewel, pallet upper Jewel, pallet lower Jewel, third upper Jewel, third lower Jewel. roller Stone, pallet, receiving Stone,pallet. cg (When ordering. please :state whether palie' stone is for solid or! znece pallet and fork.) Leyer,, O.F. Le't'er, clutch, Htg. Lever, setting, O.F., P.S., before 5 911 Lever, setting, Htg., P.B., after 5 1910 Lever, setting, O.F., P.S., Nos. 3 1911 to 719000 incl. Leyer, setting, Htg., P.S., Nos. U t 911 to 719000 incl. Lever, setting, complete, O.F., P.S., Nos. SU911 to 719000 incl. Le't'er, setting, complete, Htg., P.S., Nos. SU 011 to 719000 incl. Lever, setting, O.F., P.S., after 719000 Lenr, setting, Htg.. P.S. after 710000 Lever, shop, O.F. Lever, shop, Htg. Main'pdng, Str. 18, refill 207 Mainspring, Str. 19, refill 206 Nut, release stud Pallet, 2 piece, D.R. Fork, 2 piece, D.R. Fork, 2 piece, S.R. Pa.llel, and Fork, 2 piece Pallet and Fork, solid, D.R. J'allet, Fork and Arbor, 2 piece Pallet, Fork and Arbor, soud J'inion, cannon PiuioD, escape Co 326 323 3S2 391 396 395 392 394 4S1 482A 495 517 4SS 511 1361 209 485 493 491 192 494A 504 512 512A 49S 197 507 518 523 523A 516 506 50S 204 524 50S 200 529 401 565 331 417 41S 419 421 549 386 3830 420 54S 422 423 416 434 435 310 607 40S 344 357 363 367 332 333 3llA 329 3130 564 Pinion, winding Pin, push Regulator RoUer, small Roller, large Roller, large and jewel pin Roller, Bingle Roller, single and jewel pin Screw, balance Serew, meantime Serew, banking Serew, binding Screw, bridge Screw, pallet bridge Screw, setting wheel bridge Screw, hairspring stud cap Serew, case Screw, click Serew, balance cock Scr e w. dial, 4 footed dial Screw, diaj, 3 footed dial Serew, ratchet wheel hub Serew, winding wheel hub, 2 holes Screw, winding wheel hub, 1 hole Serew, jewel, balance upper or plate Screw, jewel, balance lower, or pallet cap Serew, setting lever or clutch lever Screw, regulator micrometric Screw, shipper, before 868001 Screw, shipper, after 868000 Scr ew, click spring Scr ew, clutch spring, lever set Serew, clutch spring, or setting lever spring, P.S. Screw, regula.tor spring Screw, shipper spring, lever set Screw, setting lever spring, P.B., 1st series Screw, setting lever spring, P.B., 2nd series Screw, yoke, lever set Shipper, before 81i8001 Shipper, after 858000 Spring, click Spring, clutch, lever set Spring, clutch, O.F., P.S. Spring, clutch, Htg., P.S. Spring, clutch lever, O.F., P.S. Spring, clutch lever, Htg., P.B. Spring. hair Spring, regulator and screw Spring, setting lever, O.F., P.S., after 719000 Spring, setting lever, Htg., P.S., after 719000 Spring, setting levor, O.F., P.S.. before 719001 Spring, setting lever. Htg., P.B., after SU MO Spring, shipper, lever set Staff, balance, D.R. Staff, balance. S.R. Stems, case Stud, release Wbeel, center stajf and pinlon Wheel, third and pinion Wheel, Courth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel, setting Wheel, winding Yoke, lever set 956 964 965 GRADES 968 969 974 975 976 977 978 Special Notet Gradea 956 964 965 968 969 975 976 and 977 t.eerefitted with: ainsle roller before 2477001 double roller a/t(lr 2477000 Grade, 974 and 978 were fitted with:. ingle roller be/ore 2490001 double roller after No, 2490000 Co 324 433 4BSA 433F 320 321 322 57 3 80 380A 575 575A 334 335 32S 550 551 316 71 330 330A 325A 76 315 559 465 466 473 474 44S 449 460 461 456 457 463 464A 452 453 479 475 476 Arbor. ba.rrel Arbor. pallet, 2 piece pallet and Cork Arbor, pallet, solid pallet and fork, before 1636 01 Arbor, pallet, solid pa.llet and Cork, after 16tJ6t00 Arbor. winding, P.B., before 1674401 Arbor, winding, lever set Arbor, winding, P.B., after 1674400 Balance, with screws Balanc" (with screws) and StafT, B.R. Balance (with screws) and Staff, D.R. Balance, complete, s.n. Balance, complete, D.R. Barr"l Barrel and Arbor Bridge, setting wheel Bridge, setting wheel. H tg., P.S. Bridge, stem, Htg., P.S. Ca p, ratchet Cap, hairspring stud Click, before 776001 Click, after 776000 Collet, hairspring Hub, winding wheel, two holes Hub, winding wheel, one hole Jewel, balance upper Jewel, balance lower Endatone, balance upper Ends tone. bala.nce lower Jewel, center upper Jewel, center lower Jewel, escape upper Jewel, escape lower Jewel, fourth upper Jewel, Courth lower Jewel, pallet upper Jewel, pallet lower Jewel, third upper Jewel, third lower Jewel, roller Stones, pa.llet, receiving Stones, pallet, discharging (When ordering, pleaj8 state whether pallet stone i3 for solid or 2. piece pallet and fork.) 414 546 402 Le't'er, clutch, P.S., O.F. Lever, clutch, P.B., Htg. Lever. setting, P.S., O.F., before N o. S 2911 403 Lever, setting, P.S., Htg., before S21J910 404 Lever, setting, P.S., O.F., No!. SU911 to 719000 incj. 405 Le't'er, setting, P.B., Htg., N os. S1J Oll to 719000 incl. 411 Leyer, setting, complete, P.B.. O.F.. N os. 3!B911 to 719000 incl. 412 L"Yer, setting, complete. P.B., Htg., N os. StB911 to 719000 incl. 413A Le't'er, setting, P.B., O.F., after 719000 545 Le't'er, setting, P.B., Htg., after 710000 415 545 31S 31S 410 92A 371 3750 375B 375 37. 376B 376A 425 430 326 323 382 391 396 395 392 394 4S2 482B 495 517 Lever, shop, O.F. Lever. shop, Htg. Mainspring, Str. 18, refill 208 Mainspring, Str. 19;i, reft1l205 Nut. release stud Pallet, 2 piece, S.R. Fork. 2 piece, B.R. Pallet and Fork, 2 piece, S.R. Pallet and Fork, soud, B.n. Pall"t and Fork, soud, D.R. Pallet. Fork and Arhor, 2 piece, S.R. Pallet, Fork and Arbor, solid, S.R. Pallet, Fork and Al'bor, solid, D.R. Pinion, cannon Pinion, escape Pinion, winding Pin, push Regulatol' Roller, small Roller. large Roller. large and jewel pin Roller. single Roller, single and jewel pin Screw, balance Scr ew, meantime Screw, banking Screw. binding Continued on page 22 21
16 SIZE MOVEMENTS 4B7 511 1361 527 20B 4B4 492 490 192 494A 503 511 511A 499 197 507 S IB 523 523A 516 506 50B 203 524 200 529 401 565 331 4 17 41B 419 421 549 3B6 830 420 54B 422 423 416 434 435 3 19 607 40B 344 357 363 368 332 333 3lIA 329 3 130 564 Jl.lateriol Screw. bridge Screw. pallet.. bridge Screw. setting wheel bridge Screw. setting wheel bridge. Htg. Screw. bairspring stud Screw. case Serew. click Screw. balance cock Sere... dial. for 4 footed dials Screw. dial. tor 3 foot-ed dials Scre w, ratchet wbeel hub Screw. winding wheel hub, 2 holes Serew, winding wheel hub. 1 hole Ser ew, jewel, balance upper or plate Screw, jewel. balance lower Screw, clutcb lever or setting level' Screw. regulator. micrometric Screw, shipper, before 858001 Screw. shipper, after 868000 Screw, click spring Screw. clutch spring, lever set.. Screw, clut-ch spring, or setting lever spring P.S. Screw, regulator spring Sc rew. shipper spring, lever set Screw. setting lever spring. P,S" Nos. Stt91l to 719000 incl. Serew. yoke, lever set S hipper. before 868001 Shipper. afler 868000 Spring. click Spring, clutch, lever set Spring, clut-ch, O.F" P.S" Nos. S i011 to 719000 Sprinjl:. clutch, Htg., P,S., Nos. 3 2911 to 719000 Spring. clutch lever, O.F., P.B., after 719000 Sprin g, clutch lever, fitg., P.S., after 719000 Spring. hair Spring, regulator and screw Sring. setting lever, P.S. O.F. after 71 9000 Spring. setting lever, P.S., fitg., after 719000 Spring. setting lever, P.S., O.F., all grades up to 719000 Spring, setting lever. P.S., ntg., all grades up to 719000 Spring. shipper, lever set Staff. balance, D.&. Staff. balance, S.&. Ste rn, case Stud. hairspring Stud. release Wheel. center staff and pinion Wheel. third a n d pinion Wbeel, fourtb and pinion Wheel. escape and pinion Wheel, bour Wheel. minute Wheel, ratchet WIH' el. setting Wbe.. l. winding Yoke, lever set 960 961 970 GRADES 971 990 991 992 993 994 Specwl Note: Grade 992 fitted w ith: /Jin g le roller be/ore S7iOOO doub le roller after 379301 Grade 993 fi tted with:.ingle roller- before 367801 double roller qfter /\'0. 367800 luoterial 324 Arbor. barrel 431 Arbor, pallet, 2 piece pa llet and rork 432 Arbor, pallet, solid pallet and fork, before 1609001 432F 320 321 322 56B 379A 37gB 574.A. 602 334 335 334A 335A 328 550 551 316 71 330 330A 325A 76 3 15 559 465 466 472 474 447 449 459 461A 467 469 455 457 462 464 470 470A 451 453 479 475 476 414 546 402 403 404 405 411 412 413A 545 415 547 317 534 4 10 92 92A 90 3 71 375A 375 372 373 376 425 429 326 323 3B2 Arbor. pallet. solid pallet and fork, after N o. 1609000 Arbor, winding, P.S.. all grades up to 719000 Arbor, winding, lever set Arbor. winding, P.S., after 719000 Balance, with screws B a lance (with screws) and Staff. S.R. Balance (with screws) and Staff, D.R. Balance. complete, S.R. Balance, complete, D.R. Barrel Barrel and Arbor Barrel, M.B.. Grade 99ft onlll Barrel and Arbor. M.B., Grade 991! onlll Bridge, setting wheel Bridge. setl:ing wheel. Htg., P.S. Bridge. stem, Htg., P.S. Cap. ratchet Cap. balrspring stud Click. before 77500 1 C lic k, after 176000 Collet. hairspring Hub. winding wheel, 2 holes Hub, winding wheel, 1 hole Jewel, balance upper J e... e l, balance lower Endstone. balance upper Ends tone. balance lower J ewel, center upper J e wel. center lower J ewel, escape upper J e wel. escape lower Endatone, escape upper Ends ton... escape or pallet lower Jewel. fourth upper J e we l. fourth lower J e... e l, pallet upper J e... e l. pallet lower Endst one Cap, pallet upper, before 1616001 Endetoue Cap, pallet upper, after 1676000 Jewel. third upper Je... e l. third lower Jewel. roller Stone, pallet, receiving Stone. pallet. discharging (When ordering. please state whether pallet stone is for solid or! piece pallet and fork.) Le.. er, clut-ch, P.S.. O.F., after 719000 Lever, clut-ch, P.S., Htg.. after 719000 Lever, setting, P.S., O.F., before SU9IO Le.. er, setting. P.S., Htg., before SftJ!91 0 Le ver, setting, P.S., O.F., Nos. SUM I to 719000 incl. Lever. setting, P.S., Htg., Nos. 3f1!911 to 719000 incl. Lever. setting, complete, P.S., O.F., Nos. Stf911 to 7 19000 1nd. Lever. set..t ing, complete, P.S., Htg., Nos. S2$911 to 7 19000 incl. Lever, setting, P.S., O.F., after 719000 Leve r, setting, P.S., Htg., after 719000 L e ver. shop, O.F. Lever, sbop, Htg. Muinspring, Str. 19, r efill 206 or Str. 18, refill N o. 207 M ai npring. Str. 16, rethl 210 Nut, r elease stud Palle t, 2 piece, D.R. Pallet. 2 piece, s.n. Fork, 2 piece, D.R. Fork. 2 piece, S.R. Palle t and Fork, 2 piece, D.R. Pallet and Fork, solid, D.R. Pallet. Fork and Arbor, 2 piece, D.R. Palle t. Fork and Arbor, 2 piece. S.R. Pallet. Fork and Arbor, solid. D.R. Pinion. cannon Pinion, escape Pinion. winding Pin, push Re/,t ulator, Grades 960, 961, 971. 901, 99, 993 and 994 382A 391 396 395 393A 392 39. 4B1 4 82A 495 51 7 488 511 1361 527 209 4 85 493 491 192 494A 504 512 512A 49B 197 498 507 518 523 523A 516 506 50B 204 52. 200 529 401 565 331 417 41 B 419 421 549 3B6 383C 420 54B 422 423 416 434 435 319 607 40B 342 355 356 361 362 366 332 333 31IA 329 3130 564 609 610 611 60lA 612 613 Regulator. Grades 970 and 990 Roller, sm&ll Roller, large Roller, la.rge and jewel pin, steel Roller, large and je wel pin, bronze Roller. single Roller, single and jewel pin Scre w, bala.nce Screw, meantime Sere... banking Screw, binding Screw, bridge Screw, pallet bridge Screw, setting wheel bridge Scr ew. setting wheel bridge Htg. Screw, hairspring stud cap Screw, case Screw, click Screw, balance cock Scre w, dial tor 4 footed dial Screw, d1a.1 for 3 footed dial Screw, ratchet wheel hub Screw, winding wheel hub. 2 holes Screw, winding wheel hub, 1 hole Sere..., balance upper jewel Screw. balance lower jewel, or pallet cap Scre w, plate jewel Scre... clutch level' or setting level' Scr ew, r egulator, mlcrometric Scr ew, swpper, before 868001 Screw, shipper, afler 868000 Screw, click spring Screw, clutch spring, lever set Screw, clutch spring, or setting lever spring, P.S. Screw, regulator spring Screw, swpper spring, lever set Screw, setting lever spring, P.S., Nos. SfE911 to 719000 Screw, yoke, level' set S hil)per. before 858001 S hipper, after 858000 SprinS, click S pring, clutcb, lever set S prins. clutch, O.F., P.S., Nos. SU911 to 71 9000 Spring. clutch. Htg., P.S., Nos. Sfe911 to 719000 Sprios, clut-ch lever. P.S., O.F.. after N o. 719000 Sprins, clutch lever, Htg., P.S.. after 7 19000 Spring. hair SprinK. regulator and screw S pring. setting lever, P.S., O.F., after 719000 Spring. setting lever, nt.g., P.S., after 7 19000 Spring, setting level', grades up to No, 719000 Spring. setting level'. grades up to 719000 Spring, sbjpper, lever set Staff, balance, D.R. Staff. balance, S.R. St.. Dl., case Stud, release Wbeel. center staff and pinion Wheel. third a nd pinion, gold Wbeel, third and pinion, brass Wheel, fourth and pinion, gold Wbel, fourth and pinion. brass Wheel. escape and pinion Wheel, hour Wbeel, mlnute Wheel, ratchet Wheel, setting Wheel, winding Yoke, lever set Jllaterial GRADE 992B P.S., O.F., all P.S., H tg., all Arbor. barrel Arbor, pallet Arbor. winding llalance (with screws) and Hub Balance (with screws) and Staff B.lance, complew 22
i 16 SIZE AND 12 SIZE MOVEMENTS j l l l <A,. 614 615 616 617 61. 387A 619 620 621 622 623 604A 624 625 626 627 628 629 630 631 632 479 67. 67. 534B 35434 633 634 635 636 Barrel Barrel and Arbol!' Click Clip, winding arbor Collet, hairspring Endetone Cap, balance upper Endetone Cap, balance lower End"tone Cap, escape upper Endstonc Cap, escape lower or pallet lower End.tone Cap, pallet upper Hub, balance wheel Jewel, bala.nce upper or lower Jewel, center upper Jewel, center lower Jewel, escape upper or lower, or pallet lower Jewel, fourth upper or third upper Jewel, rounb lower or third lower Jewel, pallet upper Jewel, pallet stone, receiving Jewel, pallet stone, discharging Je... el. roller LeTer, clutch Leyer, shipper Main.pring, Str. I5H; MM l\lainspl'i ng, (standard) str. 370, Dynavar Pall.,t and Fork Pallet, Fork and Arbor Pin, banking, before No, 04049 Pinion, cannon <A,. 637 640 641 642 643 644 481 482A 495 645 646 647 64. 649 650 6093 1366 651 51' 652 6096 1798 653 654 655 656 675 657 658 659 677 16 SIZE MOVEMENTS Pinion, escape Pinion, winding Regulator Rolle>:', large Rolle>:" large and jewel pin Rolle>:" small Screw, balance SC>:'flW, balance meantime Screw, banking, afler 04048 Sc>:'ew, bridge or balance cock Sc>:'ew, pallet bridge Screw, case Sc>:'ew, click Screw, dial foot Screw, balance upper cap Sc>:'ew, cap, balance lower. escape lower. escape upper. and pallet lower Screw, pallet upper cap Screw, shipper lever Screw, micrometric regulator Screw, regulator spring Scr ew, setting cap spring Screw, hairspring stud Screw, ratchet wheel Screw, winding wheel Spring, click Spring, clutch lever Spring, hair, Elinflar Extra S pri ng, regulator Spring, setting cap Staff", balance <A,. 662 665 672 667 66. 6042 669 670 673 674 <A,. 601A 601 602 608 350 604A 349 348 393A 606 603 605 607 Wheel, center and pinion Wheel, escape and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel, setting Wheel, lower winding Wheel, winding All other procurable parts same as Grade 992 GRADE 992E Materi61 Balance (with screws) and Hub Balance (\\-ith screws) Hub and StatT Balance, complete Bridge, pallet Collet, hairspring Hub, balance wheel Jewel, roller Roller Rollcr and Pin Spring, hair, Elinvar Extra Staff", balance Staff, balance with hub All other procurable parts same as Grade 99S 12 SIZE MOVEMENTS <A,. 3320 3355 3400 3402 3499 3314 3315 3338 3408 3340 3335 3415 3503 3326 3440 3441 3447 3449 3417 3418 3419 3421 34:'.2 3425 3426 3429 3431 3435 3442 3444 3436 3438 3452 3450 3451 3344 3328 3333 3404 3405 3348 3353 3334 3406 3413 3453 3453A GRADE 400 (Thin Model) Arbor, motor barrel Arbor, pallet Balance, with screws Balaoce and Staff", with screws Balance, complete Bar>:'el, motor Barrel, arbor, motor CliP, setting wheel Cap, hairspring stud Click. complete Collet, hairspring Hub, ratchet wheel Hub. winding wheel Jewel, balance upper J e w el. balance lower Endetone, balance upper Eudetooe, balance lower Jewel, barrel upper Jewel, barrel lower Jewel. center upper, unset Jewel, center lower Jewel, third upper, unset Jewel, third lower Jewel. fourth upper, unset Jllwlll. fourth lower Jewel, escape upper Jewel, escape lower Endetone. escape upper Endetone, escape lower Jewel, pallet upper Jewel, pallet lower Jewel, roller Stone, pallet, receiving Stone, pallet. discharging Lever, sett.ing Mainepring. Str. 16 Nut, regulator, adjust.ing Pallet and Fork Pallet, Fork and Arbor Pinion, cannon Pi nion, escape Pinion, winding R egulator Holler, combination, complete Screw, balance Screw, meantime <A,. 3460 3455 3479 3473 3475 3454 3474 3466 3461 3470 3477 3479 3471 3472 3469 3478 3342 3443 3407 3416 3411 3350 3332 3377 3386 3392 3397 3369 3370 3318 3336 3337 3322 <A,. 1229 1230 1255 Screw. banking Sc>:'ew, bridge Screw, pallet bridge or winding wheel hub Sc>:'ew, setting or minute wheel cap Screw. hairspring stud cap Screw, case Screw. ratchet wheel Screw, balance or escape lower jewel Screw, escape cap Screw, setting lever Scr ew, micrometrlc regulator Sc>:'ew, click spring Screw, clutch spring Sc>:'ew, setting lever spring Scew, setting lever stop Scr ew, regulator spring Spri ng, clutch Spring, setting lever Sp>:'ing, r egulator Sp>:'ing. hair Staff", balance SteDl, winding Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion W hee l, escape and pinion Wheel, hour Wheel, minute Wheel. ra.tchet Wbeel, setting, small Wheel, setting, large Wheel, winding GRADES 900' 910 914 *Grades with motor barrel 920' Special Note: dquble roller after 1902600 &ingle roller type before 1902601 Materi61 Arbor, motor barrel, Grades 900 and 920 Arbor, barrel, Grades 910 and 914- Arbor, pallet, Grades 900, 910 and 914 <A,. 1256 1232 1300 1301 1302 1302A 1303 1303A 1399 1400 1214 1216 1215 1217 3038 1308 1224 1225 1240 1239 3035 1315 1227 1403 126 1340 1341 1347 1347A 1348 1349 3143 1342 1344 1345 1346 1317 1318 1319 Mat(lriol Arbor, pallet, Grade 920 Arbor, winding Balllnce, with screws, Grades 900, 914 and 9 0 Balanee, with screws, Grade 910 Balance (with serews) and Staff. S.&. type, Grades 900,914 and 920 Balance (with screws) and Staff, D.R, type, Grades 900, 914 and 9iO Balance (with screws) and St.aff, S.R. type, Grade 910 Balance (with screws) and Staff", D.R. Grade 910 Balance, complete, Grades 900, 920 and 914 B.. lance, complete, Grade 910 Barrel, motor, Grades 900 and 920 Barrel, Grades 910 and 914 Barrel, arbor cap, Grades 900 and 920 Da>:'rel and Arbor, Grades 910 and 914 Bridge, setting wheel Cap, hairspring stud Cap, ratcbet wheel, Grades 900 and 9fO Cap, rat-chet wheel. Grades 910 and 914 Click, Grades 910 and 91 Click, and spring, Grades 900 and 920 Collet. hairspring liub, M,B. Grades 900 and 9fO, before 1761001 Hub,, Grades 900 and 920, after 1761000 Hub, winding wheel Jewel, balance upper J ewel. balance lower Endetone. balance upper, Grades 900 and "0 Endlltone. balance upper, Grade 914 En de tone. balance upper. Grade 910 En.ll!tone, balance lower End8tone Cap, escape upper, Grade 9f!0 ":nd8tone, escape upper, Grade 920 End.. tooe, escape lower, Grade 9 0 Eodetone Cap, pallet upper, with jewel, Grade 920 Eod.. tone. pallet lower, Grade 920 Jewel, barrel upper, Grades 900 and 920 Jewel, barrel, lower, Grades 900 and 920 Jewel, center upper, Grades 900 and 9 0 Continued on vage 24 23
12 SIZE MOVEMENTS tai9a 1320 1321 1330 1332 1333 1331 1334 1335 1326 1327 1328 1329 1336 1337 1338 1339 1322 1323 1324 1325 ]352 1350 1351 3045 3045A 1244 1244A 1246 1246A 1228 544 )304 1305 la05a 1248 1253 3054 3034 1233 1306 la06a 1312 3 112 1313 3113 3114 1353 1353A 3153B )353C 1360 494A 1376 203 1361 1375 1354 192 3157 1359 1374 1379 1365 1366 1365 3163 1362 1365 3157 1377 1358 la7l 1378 1372 1241 1243 1243A 1311 1307 3042 3042A 1250 Jewel. center upper. Grade S14 Jewel. center upper, Grade 910 Jewd. center lower J e w.,i, escape upper, Grade BOO J.. wel. escape upper, Grade 914 Jewel, escape upper, Grade 910 J.,wel, escape upper, Grade 9fO Jewel, escape lower, Grades 000, 910 and 914 Jwel, escapf> lower. Grade 9tO Jewel, tourth upper, Crades 900 and 9fO Jewel, fourth upper, Grade 914 Jewrl. fourth upper, Grade 910 Jewrl. tourth lower Jewel. pallet upper, unset, Grades 900, 910 and 014 J.. wel, pallet upper, unset. Grade 9!0 Jewel, pallet lower, Crades 900, 910 and 91, Jewel. pallet lower, Grade 9 0 Jewel. tbjrd upper, Grades 900 and 9fO Jewel, third upper, Grade 914 Jewd, thlrd upper, Grade 910 Jewel, third lower Jewel, roller Stone. pallet, receiving Stone. pallet. discharging Le... r. c lutch, Grade3 900. 910 and 914 Leyer, clulch. Grade 9 0 Lever, setting, Grade3 000 and 9fO Leyer, settinfl:, Grades 910 and 9 14 L.. nr, shop. Grades 900, 914 and 9S0 Le.. er, shop, Grade 910 Mainspring. Str. I7. refill 211 Nut, motor barrel arbor, Grades 900 and Bfa Pallet and Fork Pall.. t, Fork and Arbor, Grade 9 0 Pallet, Fork and ArbOl:, Grades 900, 910 and 014 Pinion, cannon Pinion. escape, Grade 9tO I'inion, escape. Grades 900, 910 and 914 I"lnion. winding I'in. push Uegulator. Grades 900 and 9fO Jtelgulator, Grade3 910 and 914 Rollel:, large brass, S.R. type noll"l:. large steel. D.R. noller, large and jewel pin, brass, S.R. type Itoller, large and jewel pin, steel. D.R. Itoller. small Screw, balance. Grades 900, 914 and 9 0 Screw, balance, Grade 910 Screw. meantime, Grades 900. B14 and Bfa Screw, meantime, Grade Bl0 Screw, banking Screw. bridg-e Screw. pallet bridge Screw, Intermediate cap Screw, motor barrel ratchet wheel cap Screw, hairspring stud cap Screw, case Screw, c lick, Grades 900 and BSO Screw, click. Grades 010 and 914 Serew. dial toot Screw, ratchet wheel hub Screw. winding wheel hub Screw. balance upper jewel Screw, balance lower jewel Screw. escape upper jewel, Grades 910, 9 14 and 900 Screw, escape upper jewel, Grade 9fO Ser.. w, tourth upper jewel, Grades 900 and 9fO Screw, third or fourth upper jewel, Grades 910 and 914 Screw, clutch or setting lever Screw, micrometric regulator Screw, cuck spring Screw, clutch spring Screw, regulator spring Screw, setting Jever spring Spriolg, click. Grades 910 and 914- Spring, clutch lever, Grades 910 and 914 S,)ring. clutch lever, Grades 900 and 9 0 Spring. hair Spring, r egulator and screw Spring, set.ting lever, Grades 900 and OltO Spring, setting level', Grades 910 and 914 sua, balance, S.R. type Ca 1250A 1316 1277 1278 1279 1286 1287 1288 1292 1293 1294 1297 1299 1269 1270 1218 1220 1221 3037 3036 1222 1222A 1223 902 ]Jfoterial Staff. balance. D.R. Wh"el, center, staff and pinion, Grades 900 and BfO Wheel, center, staff and pinion, Grade 91, Wheel, center, staff and pinion, Grade 910 Wheel, third and pinion, Grades 900 and Bfa Wheel. third and pinion. Grade 9 14 Wheel, third and pinion, Grade 910 Wheel, fourth and pinion, Grades SOO and B2a Wheel, fourth and plnjon. Grade 914- Whe.. I, fourth and pinion, Grade 910 Wheel, escape and pinion. Grade 9 0 Wheel, escape and pinion, Grades 900, 910 and 914 Wheel, hour Whe..,J, minute Wheel. ratchet. Grades SOD and 9fO Whc... I, ratehct. Grade 914 Wheel, ratchet, Grade 910 W h... I. setting. small Whed, setting. large Wbeel, w1nding, Grade 9fO Wheel, w1nding, Grades 900 and 914 Wheel, winding, Crade 910 GRADES 904 912 916 918 Specio' Note: 922 Grode 912 fitted with: non friction balance jewelin, before 3139801 friction bcdance jeweling after 3139800 Grade 918jiued witll: non friction bolance jeweling before 3384201 friction Lalan<:e jeweling after 3384200. 3029 3030 3055 3056 30:32 3100 3101 3102 3103 3199 3200 3014 1216 3015 3017 3038 3108 3040 3035 3115 3203 3026 3140 31401 1341 3147 3147F 3147A 3148 3148F 1349 3149F 3143 3142 3144 134.5 1346 3117 Arhor, barrel, Grades OO! and 9tf Arbol:, barrel. Grades BIt, 916, 904 and B18 Arbor, pallet. straight pivots Arbor, pallet, conical pivots Arhor, winding Balance. with gold screws Balance. with gut screws Balance (with gold screws) and Staff Balance (with gilt. screws) and Staff" Balance, complete, gold screws Balance. complete. gilt screws Barrel. Grades 90! and 9ft Barrel, Grade3 SIt. 918. 904 and 918 Barr..,I, cap and arbor. Grades 901 and Bft Barrel, cap and arbor, Grades 9lf, 0/8, 904 and 91S Bridge. setting wbeel Ca p, bairspring stud Click Collel, hairspring Huh, motor barrel Huh, winding wbeel Jewel. balance. upper Jewel. friction. balance, upper Jewel, balance, lower Enduone, balance upper, raised gold settjng End.t one. friction, balance upper, raised gold setting End.tone, balance. upper, gnld setting End.lone. balance upper, gut setting End810De, jric/wn, balance upper End.tone, balance lower End.loue, friclicm. balance lower Endlltuoe Cap, escape upper. Grade 9!B Endlltone, escape upper, gold setting, Grade OU End.tone. escape lower, Grades 904, 918 and 9t1 Enddone Cap, pallet, uppcr, Grade 9ft EnddoDe, pallet. lower, Grade BS Jewel, barrel uppor Ca 3118 3 119 3119A 3120 3 121 3 122 3123 8124 3 125 3 126 3127 3 128 3 129 3130 3 132 Mate,.ial Jewel, barrel lower Jewel, center upper. raised gold setting Jew.. l. center upper, gold setting Jewel. center upper, gilt. setting Jewel, center lower J.,"'el. third upper, ra.lsed gold settlng Jew.. I, thlrd upper. gotd setting Jewel, third upper, gilt setting Jewel. third lower Jewel, fourth upper. raised gold setting, Grades 90! and 9tH! Jewel, fourth upper, gold setting, Grades 904. 918 and 918 Jewel, tourth upper, gilt setting, Grade Bit Jew.. I, fourth lower Jewel. escape upper, raised gold setting, Grade 90!! Jewel, escape upper, gold setting. Grade 91' Jewel, escape upper. gut setting, Grade 91f Jewel, escape upper. gilt setting. Grades 904.9 and 9 18 Jewe l, escape lower. Grades 91B, 916 and Bot Jewel, escape lower, Grades 904, 018 and 3133 3131 3134 3135 9" 1336 Jewel, pallet upper, unset, Grades 91B: Ot, 904, 916 and 918 1337 3 138 Jewel, pallet upper, unset, Grade 91t Jewel. pallet lower, Grades 9It, 918, 90B and 0 18 3139 ]352 1350 1351 3045 Jew.. I, pallet lower, Grade OBI Jewel, roller Stone, pallet. receiving StOlle, pallet, discharging Leyer, clutch, Grades 90t, Otl, 904 and 918 3045A 3044 Lever, clutch, Grades 911 and 916 Lever, setting, Grades 90B, 9 B, 904 and B18 3044A 3046 3028 8104 3 105 3 t05a 3048 3053 1253 30,')4 3034 3033 3 106 3J06A 3 11 2 3 113 3 114 1353 Lever, setting. Grades 9It and 918 Lever, shop Muinspring, Str. 17U, refill 211 "ullel and Fork Pallet, Fork a.nd Arbor, conical pivot-s "nllet, Fork and Arhor, straight pivots Piuion, cannon Pinioo, escape, conical pivots ]'lnion, escape, Grade 91 8 Pinion, escape, straight pivots Pinion, winding Pin. push Regulator, Grades 902, 91S, 904 and 918 Hegulator, Grades 9It and 918 Itoller, large Uoller, large and jewel pin Itoller, small Screw, balance, Grades 90B, 904, 9/8, 918 and Bf 1353A 3 153B 3160 494A alma 3176 203 3175 1354 3157 Screw, balance, Grade 91S Screw, meantime Screw, banking Screw, bridge Screw, balance cock Screw, pallet bridge Screw, intermediate cap Screw. hairspring stud cap Screw, case Screw, click, setting lever or clutch lever 192 3179 3 174 3156 3 158 3166A Screw, dial foot Screw, winding wheel bub Screw, ratchet wheel Screw, barrel upper jewel Screw, center upper jewel Screw. escape or pallet lower jewel 3 162 Serew. fourth 0 1' escape upper jewel, Grade3 90, 904 and 9 18 3 163 1365 Screw, escape upper jewel, Grade 9t! Screw, balance. third, fourth and escape jewel, upper je wel, Grades 90, 904, 918 and 9U ]366 Screw, balance lower jewel, Grades 90t, 904, B16 and BU, 3166A Screw, balance lower jewel, Grades 9/BF and 01S. 3168 3177 3171 3178 3172 Screw, pallet cap. Grade Bt! Screw, regulator. micrometric Screw, spring clutch Screw, spring r egulator Screw. spring setting lever 24
12 SIZE, 10 SIZE AND ' O SIZE MOVEMENTS 12 SIZE MOVEMENTS 3041 1243A 1243 3111 3107A 3042 3042A 3050 3116 3077 3078 Spring, click Spring. clutch lever, Grades 90,' 004. 918 and 922 Spring, clutch lever, Grades 912 and 918 Spring. hair Spri ng, regula.tor. with screw Spring, setting lever, Grades 002, 904. 918 and 922 Spring, setting lever, Grades 912 and 916 Staff. balance Wh"""l. center, stair and pinion, swedged arm, gold Wheel. center, stair and pinion, swedged arm. gilt Cot. 3079 3086 3087 3088 3092 3093 3094 3097 1298?laterial Wheel, center, staji and pinion, flat arm, gilt Wheel. third and pinion, swedged arm, gold Wheel, thlrd and pinion, 8wedged arm. gilt Wheel, third and pinion, flat arm, gilt Wheel, fourth and pinion, swedged arm, gold Wheel, fourth and pinion, swedged arm, gilt Wheel, fourth and pinion, flat arm, gilt Wheel, escape and pinion, Grades 904 and 922 Wheel, escape and pinion, Grade 918 1299 3069 3070 3019 3020 3021 3036 3037 3022 3023 3023A Jlfaferial Wheel, escape and pinion, Grades 902, 912 and 916 Wheel, hour Wheel, minute Wheel, ratchet, Grades 90!!, 904 and 922 Wheel, ratchet, Grades 9/6 and 918 Wheel, ratchet, Grade 912 Wheel, setting I - large Wheel, setting 2- small Wheel, winding, Grade 922 Wheel, winding, Grades 902, 904. 916 and 918 Wheel. winding, Grade 91S Ca. 6011 6034 6053A 6054A 6055A 6005 6074 6019 6015 6065 6009 6010 6079 6080 6077 6067 6068 6073 6069 6075 6073 6069 6081 6082 2012 6018 6022 6021 6056 6057 6029 6033 6014 6058 6063 1353A 60."8 6087 6094 6086 5097 6091 6092 6093 6000 179R 6096 6097 6098 6020 656 6061 GRADE 917 Arbor. barrel Arhor, pallet Balance, with screws Balanee (with screws) and Staff Balance, complete Barrel Barrel and Arbor Click Collet, hairspring Hub, balance wheel Hub. winding wheel EndlltODe Cap, balance upper EDd8tone Cap, balance lower lew.. ', balance upper or lower Jewel, center upper J.. w.. I, center lower lew.,i, escape upper or escape lower Jewel. fourtb upper or fourth lower Jewel, pallet upper Jewel. pallet lower Jew.. I. third upper or third lower Ston... pallet. receiving Stone. pallet, discharging Jewel, roller L"ver, clutch Lever. setting Main8pring. Str. 17 MM Pallet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion. escape Pi nion, winding Heu"'tor Roller, combination Screw, balance Scr.. w. balance cock Screw, bridge Screw. pallet bridge Screw, case Screw, click Screw, dial foot Screw, balance upper cap Screw, balance lower cap Screw. setting lever Screw. hairspring stud Screw, setting cap spring Screw. ratchet wheel Screw, winding wheel Spri ng, click Spring, lever Spring, hair. Elinvar Extra N,?, 6040 6027 6026 6066 6045 601'i2 6048 6050 6041 6017 6042 6007 6016 6008 601lA 6012 6053A 60.,)4A 60MA 6072 6005A 60I9A 6089 6071 6070 6067A 6073A 6043 6080 6069A 6033A 1353 6100 6093 6002 6013 6004 6099 6045A 6052A 6048A 6050A 6007A 6008A 10 SIZE MOVEMENTS Spring. setting cap Staff, balance Siern. winding Wh.. el, center and pinion Wheel, escape and pinion Whe..'. third and pinion Whe.. I, Courth and pinion Wheel. bour Whe.. l. intersetting Whe..., minute Wheel, ratchet Wh.. el, setting Wheel, winding hfaterial GRADE 921 Arbor. barrel Arbor, ratchet wheel Balance, with screws Balance (with screws) and Staff Balance, complete Barrel Barrel and Arbor Click Hook, barrel arbor lewel, barrel upper Jewel. barrel lower lewel. center upper Jewel. escape upper or lower Endetone Cap. escape upper End8tone Cap, escape lower Jewel, fourth upper, or third upper Pinion, escape Screw. balance Screw, regulator Screw, regulator spring Screw, regulator strap Screw, ratchet wheel Spring, regulator Strap, regulator Wheel, center and pinion W II.. e!, esr.ape and pinion W" eel, third and pinion Whe... fourth and pinion Wheel, ratehet Wheel, winding A II other procurable parts same as Grade 91 i o SIZE MOVEMENTS 6011A 6012 6035 6025 6024 6023 6072 600.')A 6019A 6089 6030 6071 6070 6067A 6043 6080 60nA 6069A 6085 6084 5080 60nA 6090 6064 6033A 6059 5084 6093 5038 5085 1798 6013 6100 6093 6002 6060 6003 6039 6027 6099 6045A 6036 6048A 6050A 6006 6038 GRADE 923 Arbor. barrel Arbol", ratchet wheel Arbor, pallet Balance, with screws Balance (with screws) and Staff Balance, complete Darrel Barrel and Arbor Click Hook, barrel arbor Huh, balance wheel Jewel. barrel upper Jewel. barrel lower Jewel, center upper Eud8tone Cap, escape upper End"tone Cap, escape lower Jewel, escape upper or lower Jewel. fourth upper or lower Jewel, pallet upper End8tone Cap, pallet upper End8tone, pallet lower Jewel. patiet lower Lever. clutch Pallet. Fork and Arbor Pinion, escape Regulator Screw. balance Screw. escape upper or lower cap Screw. pallet upper cap Screw, pallet lower cap Screw, hairspring stud Screw, ratchet wheel Screw, regulator Screw, regulator spring Screw, regulator strap Spring, hair, Elinvar Extra Spring, regulator Spring, setting cap StatT, balance Strap, regulator Wheel, center and pinion Wheel, escape and pinion Wheel, third and pinion Wlle.,I, fourth and pinion Wheel, ratchet Wheel, winding All other procurable par.ts same as Grade 917 1524 1525 2110 981 GRADES 983 985 hlaler;al Arbor, barrel. Grade 98S Arbor, barrel, illotor, Grade 986 Al"bol". barrel, Grade 981 2133 1528 2151 1580 2152 1581 Arhor, pallet Arbor, winding Balance, with screws, Grade 981 Balance, with screws. Grades 983 and 986 Balance (with screws) and Staff. Grade 981 Balance (with screws) and Staff, Grades 983 and 985 Cat, 2153 1581A 2105 1512 1514 2106 1513 1515 Balance. complete, Grade 981 Balance. complete, Grades 988 and 985 Barrel, Grade 981 Barrd, Grade 983 Barrel. motor. Grade 985 Barrel and A.-bol", Grade 981 Barrel a.nd Arbor. Grade 983 Barrel, Motor and A.-bor. Grade 981i Continued on page 26 25
o SIZE AND 6/0 SIZE MOVEMENTS o SIZE MOVEMENTS 1534 1522A 2119 1537 1538 1531 1592 1526 1523 2109 2174 2175 1608 2176 2177 1594 1595 1590 2164 2165 1602 2170 2171 1600 2168 2169 2172 2173 1598 2166 2167 2012 2010 2011 1542 2124 1541 1911 1934 1712 1984A 1905 1906 1918 1909 1919 2515 2565 1910 2oo6 2000A 2007 1779 2008 2008A 2009 1767 1996 1997 1773 2oo2 2003 1771 2000 2oo1 2004 2005 1769 1998 1999 2012 2010 2011 1725 1724 2422 26 ltlatcriol B ridge. setting wheel Cap, rat.chet wheel, Grade 986 Click, Crade 981 Click, Grade 985 Click, Grade 98 Collet. hairspring Hub, motor b arrel, Grade 985 Jlub, winding wheel. Grade 98 Hub, winding wheel. Grade 981 and 986 Jewel, balance upper Jewel, balance lower End.toue, balance upper, Grades 983 and 985 End_toDe. balance upper, Grade 981 Endl!ltoDe. balance lower Jewel, barrel upper, Grade 985 Jewel, b a rrel lower, Grade 986 Jewel, center upper, Crades OSS and 985 Jewel, center upper, Grade 981 Jewel. center lower Jewel, escape upper, Grades 08S and 986 Jewel. escape upper. Grade 981 Jewel. escape lower Jewel, fourth upper. Grades 98S and 986 Jewel, fourth upper. Grade 981 Jewel, fourth lower J(lwcl, pallet upper, unset Jewel, palle t lower Jewel. third upper, Grades 983 and 986 Jewel, twrd upper, Grade 981 Jewel, third lower Jewel, roller Stone, pallet. receiving Ston(l. pallet, discharging Lever. c lutch, Grades 988 and 986 Lever. clutch. Grade 981 Lever, setting, Grades 98S and 986 luaterial GRADES 986 988 Arbor. barrel Arbor, pallet Arbor. winding, Grade 988 Balance. complete Barrel Barrel and A.. bor Cup, intermediate wheel Cap. ratchet wheel Click Collet, hairspring Hub, winding wheel Jewel. balance upper,.080 0.0. Jewel, balance upper,.070 O.D. J e wel, balance lower End8ton... balance upper. Grade 988 End.tone. balance upper,.080 0.0., Grade 988 End8tone, balance upper,.070 O.D. Grade 986 End4tone. balance lower J(lwel, center upper. Grade 988 Jewel. center upper, Grade 988 Jewel. center lower Je... el. escape upper, Grade 988 Jewel. escape upper, Grade 988 Jewel. escape lower Jewel, fourth upper, Grade 988 Jewel, fourth upper, Grade 988 Jewel. fourth lower J e wel, pallet upper, unset Jewel. pallet lower Jewel. third upper, Grade 988 Jewel. thlrd upper, Grade 986 Jewel. twrd lower Jewel, roller Stoo... pallet, receiving Stone. pallet, discharging Lev... r. clutch. Grade 988 Lever. setting, Grade 988 Leyer, shipper, Grade 988 2123 2125 1536 1535 1527 2154 2155 15<16 2128 2 132 2 113 2 112 1584 2156 2160 2 161 2564 16 13 2 181 2384A 2013A 1360 1615 2197 203 1620 21 83 192 3157 192 1374 1631 2199 2189 1366 1720 1921 1985 1986 1929 1933 1714 1914 1713 2357 1991 1992 2363 2564 2584 2013 2013 2013A 2019 2587 2588 2028 208 1785 2014 2014A 1787 2387 2590 2026 1802 2029 2592 1366 1792 2400 1361 2028 2031 208 2031 1798 1920 1723 1923 J\laterial Lever, setting, Grade 981 Lever, shop l\1ain&priug, Str. 1 4, refill 212, Grad 981 and 98$ l\1oin4pring. St,r. 14, M.B., Grade 986 Nut. motor barrel arbor, Grade 986 Pallet and Fork J)allet, Fork and Arbor I"inion, cannon. Grades 98S and 086 Pinion. cannon, Grade 981 Pinion. escape Pinion, winding Pin. push Regulator. Grades 983 and 986 Regulator. Grade 981 Roller, large Roller, large and jewel pin Roller. small Screw, balance. Grades 98$ and 986 S e... w. balance. Grade 98t Screw, meantime, Grades 983 and 986 Screw, meantime. Grade 98t Sc.. ew, banking Screw, bridge Screw, pallet bridge Ser... w. intermediate cap Screw, ratchet whee l cap Screw, case Screw, click, Grades 983 and 986 Screw. click. Grade 981 Screw, dial foot Scre... ratchet wheel hub, Grades 98t and 985 Screw. winding wbeet hub. Grade 983 Screw. winding wheel hub, Grades 981 and 986 Screw, balance upper jewel Screw, balance lower jewel 6/0 SIZE MOVEMENTS 1l1aterial Leyer, shop, Grade 988 Main.pring. Str. 13, retlll 213 J'allet and Fork Pallet, Fork and Arbor Pinion. cannon Pinion. escape Pinion. winding, Grade 988 Pinion, winding. Grade 988 Pin. push, Grade 988 Itegulator Rolle r. large Roller. large and jewel pin, brass Rolle r, large and jewel p in, steel Rolle r, small Screw, balance, Grade 988 Screw, balance. Grade 988 Screw, meantime, Grade 988 Screw, meantime, Grade 988 Ser... w, banking Screw, bridge Screw. balance bridge Screw, pallet bridge Screw, inte rmediate cap Ser... w. case, Grade 988 Screw, case, short, Grade 986 Screw. case, long. Grade 988 Screw, click, Grade 988 Screw. click, Grade 986 Screw, dial foot Screw. ratchet wheel hub Screw. winding whool hub, Grade 988 Screw, winding wheel hub. Grade 986 Screw, balance upper jewel Screw, balance lo... er jewel Screw. clutch lever. Grade DB8 Screw, shipper lever. Grad 986 Screw. click spring Screw, clutch spring Screw, retaining spring Screw, shipper lever spring, Grade 986 Screw, setting lever spring, Grade 988 Scr... w. hairspring stud Spring, click Spring. c lutch lever, Grade 988 Sprin&:. retaining 2191 1629. 1358 1630 2194 2196 1241 1540 2122 2159 1585 1539 2121 2126 2162A 1566 1567 2143 1572 2146 J576 2148 2150 2139 2139A 2140 1516 1519 2107 2115 1520 1521 2108 1990 1722 1925 1927 1927A 2526 2366 1975 1978 1980 1982 1971 1972 1907 1916 1917 1908 Cot. 2311 2334 235413 2505 2306 2318 2319 2515 2565 2310 2377 2007 2367 2368 2369 2370 2371 2372 2373 2374 2575 2574 2012 ltlateriol Screw, c lutch lever or setting lever Serew, rcgulatqr. micrometric Scre w. click spring, Grade 981 Screw. regulator spring Screw. setting lever spring Screw, b a h'spriog stud S,)ring, click, Grade 981 SI)ring, clutch lever, Grades D8S and 985 Spring, clutch lever, Grade 981 Spring, hair Spring, r egulator and screw Spring, setting lever, Grades 983 and 985 Spring, setting lever, Grade 081 Stuff, balance Wheel. center, st-at!' and pinion, Grade 986 Wheel. center, staff and pinion, Grade 985 Wheel, center, staff and pinion, Grade 981 Wheel. third and pinion, Grade 985 Wheel. twrd and pinjon, Grades 981 and 985 Wheel. fourth and pinion, Grade 986 Wheel. fourth and pinjou, Grades 98t and 985 Wheel, escape and pinion Whe... l. hour. long pipe Wheel, hour. short pipe Wheel. minute Wheel, ratchet, Grade 986 Wheel, ratchet. Grade 98S Wheel. ratchet, Grade 981 Wheel, setting Wheel. winding, Grade 986 Wheel. winding, Grade 98S Wheel, winding, Grade 981 J\laterial Spring, ball' Spring, setting lever. Grade 988 Spring, shipper lever, Grade 988 StnW, balance, S.R., before %041401 StnfT, balance, D.R., after Z041400 SteDl, winding, Grade 986 Wheel. center, s tafl' and pinjon Wheel,. third and pinion Wheel. fourt,h and pinjon Wheel. escape a.nd pinion Wheel, hour Wheel. minute W he.. I, ratchet Wheel. setting, small Wheel, setting, large Wheel. winding 1l1aterial GRADE 986A Arbor. barrel Arbor, pallet Dalance, complete Darrel Barrel, arbor tltted Cal" Intermediate wheel Click Collet. hairspring Hub, winding wheel Jewel. balance hole. upper Jewel, balance bole, lower Jewel, center upper Jewel, center lower Je... e l, third upper Jewel, third lower Jewel. fourth upper J e wel, fourth lower Jewd, escape upper Jewel, escape lower Je... l. pallet upper, unset Jewel, pallet lower Jewel. roller I I
6/0 SIZE MOVEMENTS Cot. 2379 2380 2010 20 11 2422 2321 2355 2356 2329 2333 1914 2357 2362 2363 256. 2013 2384A 2014A 2015A 2390 2587 2399 208 1798 2387 2590 2397 2598 2592 2593 239. 2395 2400 2589 2320 2361 2425 2327 2526 2366 2545 23'8 2350 2352 2341 2542 2507 1916 1917 2508 Cot. 2511 233. 2553A 2554A 2555A 2505 2506 2513 2319 2515 2565 2565A 2310 2377 2578 2379 2567 2567F 2568 2568F 2569 2569F 2570 2570F 2571 2571F 2572 2572F 2573 2573F ]',foteriol End.tone. balance upper End.tone. balance lower Stone. pallet. receiving Stone. pallet. dis<:harglng Leyer. shipper Moinllpring. Str. 1 2, refill 21-4 Pollet and Fork Pallet, For k and Arbor Pinion, cannon Pinion, escape Pinion, winding Regulator Roller, large Roller, large and jewel pin Roller, small Screw, balance Screw. balance. meantime Screw, case Screw, balance bridge Screw. banking Screw, bridge Screw. pallet b ridge Sc rew. intermediate wheel cap Screw, hairspring stud Sc r e w. cllck Screw. dial foot Screw, ratchet wheel Screw, winding wheel hub Scre w, balance upper jewel Screw, balance lower jewel Screw, third. fourth or escape upper Jewel Screw. center upper Jewel Scre w, shipper lever Screw, shipper lever spring Spring. click Spring. hair Spring. shipper lever Staff, balance Stern. winding Stud, hajrspring Wheel, center. staff and pinion Wheel, third and plnjon Wheel, fourth a nd pinion Wheel, escape and pinjon Wheel, hour Wheel, minute Wheel, ratchet Wheel, setting, small Wheel, setting, large Wbeel, winding 987 GRADES 987E 987F Arbor. barrel Arbor. pallet Balance, with screws, Grade 987E Balance (with screws) and Staff, Grads 981E Bola nce. complete Barrel Ba.rrel and Arbor Cap, intermediate wheel Click Collet, hairspring, Grade 987 Collet. hairspring, Grades 081E and 987F H u b, winding wheel J e wel, balance upper J ewel, balance lower J e wel, balance endstone, upper, Grade 981 J e wel, center, upper. Grade 987 J ewel, center upper, Grades 087E and 981F Jewel, center. lower, Grade 987 Jewel. center. lower, Grade 987E and 987F J ewel, third upper. Grade 987 Jewel, third upper, Grade$ 987E and 987F J ewel, third lower. Grade 981 J ewel, third lower. Grades 087E and 987F Jewel, fourth upper. Grade 087 Jewel, fourth upper, Grades 987E and B87F Jewel, fourth lower, Grade 987 J e wel, fourth lower, Grades 98rE and981f Jewel, escape upper. Grade 987 Jewel. escape upper, Grades 98TE and 087F Cot. 2574 2574F 2575 2575F 2012 2379F 2580 2010 2011 2522 2521 2355 2356 2529 2&13 2514 2357 2362 2363 2564 2584 2384.A 2586 2390 2587 2588 2399 2396 1798 2387 2590 2397 2598 2592 2593 2592 2595 2500 2589 2320 2561 2561A 2525 2527 2526 2366 2545 2548 2550 2552 2541 2542 2507 2516 2508 Cot. 2511 A 2334 253. 2535 2536 2505A 2506A 2319 2515 2565A 2310 5077 2567A 2568A 2569A 2570A 2571A 2572A 2573A 2574.!\. 2575A 2576A 2583 5079 /\-faterlal Jewel, escape or pallet lower. Grade 987 J ewel, escape or pallet lower, Grades 987E and 987P J ewel, pallet upper, unset. Grade 981 J cwel, pallet upper, Grades 981E and 087F Jew(>l. roller End.tone, balance upper. Grades 087E and 98rF End. tone, balance lower, Grade 987 Stone, pallet, receiving S tone, pallet, discharging Lever, shipper M ainepridg, St r, 12. Grade 987, 987E and 987F Pallet and Fork Pallet, Fork and Arbor Pi n io n, cannon Pinio n, escape Pinion, wind ing Regulator Rolle r, large Rolle r, large and jewel pin Holle r, small Scr e w. balance Scr e w, balance. meantime Screw. case Scr e w, banking Scre w, bridge Screw. balance cock Scr e w, palle t bridge Scr e w, setting wbeel bridge Scr e w, hairspring stud Scre w, click Screw, d ial root Scrc w, ratchet wheel Scr e w, winding wheel hub Scr e w, balance upper jewel, Grade 087 Scre w, balance lower jewel. Grads 987 Scr e w, third, fourth or escape, u pper Jewel Scr e w, center upper 'ewel Scr e w, shipper lever Screw. shipper lever spring S pring, click S pring, hair. Grades 087 and 981F Spring, hair. Grade 987E Spring, shlpper lever Staff, balance Stem, winding Wheel, center and pinion Wheel, third and pinion Wbeel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wbeel, ratchet Wbeel, intersetting Wheel, winding Jlfaterial GRADE 987A Arhor, barrel Arbor, pallet Balance, with screws BalaDce (with screws) and Staff Balance, complete Barrel Darre l and Arbor Click Collet, hairspring Hub, winding wheel J e wel, balance. upper and lower Jewel. center upper J e wel. center lower, unset J e wel, third upper J e wel, third lower Jewel, fourth u pper J ewel, fourth lower J e wel, escape upper J ewel, escape lower J e wel, pallet upper Jewel, pallet lower J e wel, r oller End.tone Cap, balance upper 5093 5080 2581 2582 2522A 2518 2321 2.'355 2356 2529 2533 25 14A 2357A 2362 2363 2564 2584 2586A 2587A 5094 5095 5088 2590 2397 5096 2598 5092 5096 2500A 2320 256ID 2920 2513A 2527 2526A 2366 2545 2548 2550 2552 2541 2542 2507A 2516A 250SA 2509 2524 2530 2537 2510 2512 5096 2517 6225 2538 2562 2577 2544 2556 Cllt. 2667 2669 2671 2673 2673F 2674 2674F 2675 2676 2621 2633 2663 2698 2696 2652 nfat,erial E nrllltone Cnp. balance lower, 2 screw holoo F.Dd8tone Cap, balance lower, screw hole S lode. pallet. r eceiving Stone, pallet, d ischarging Le"er, selling Le ver, clutch Main.pring, Str. 12>i, refill 214 Pallet and Fork I'allet. Fork and Arhor "inion, cannon l ' j niod. escape I' inion. winding Regulator Holler. large Holler. large and jewel pin Roller. small Screw, balance Screw, case Serew. bridge or balance cock Screw, pallet bridge Scre w. hairspring stud Screw, click Scre w, dial foot Screw, ratchet wheel Screw. setting cap spring Screw, winding wheel hub Sere w, balance upper endstone cap Serew, balance lower endstone cap Scre... setting lever Spring, click S prillg. hair. EllnflOr Extra Spring, clutch lever S pring, setting cap S taff, balance Stelll, winding Wheel, center and pinion Wheel, third and pinion Whecl, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel. ratchet Wheel. idtersetting Wbeel. winding Mat,erial GRADE 987S Cap, seconds setting J e... el, center upper J e wel. fourth upper J ewel, third upper Leye r, seconds setting "inion, center seconds and staff Sere... seconds setting cap Screw. stabilizer spring Spring. seconds setting lever Spriug. stabilizer Wheel, cent er seconds Wheel. center. stafl' and bushing Wheel, fourth and pinion Wheel. third and pinion A II other procurable parts same as Grade 987 A /\-taterial GRADE 979 Jewel, center upper J e wel, third upper Jewel, fourth upper J e wel, escape upper. non-friction Jewel, escape upper. friction Jewel, escape lower, non-friction J ewej, escape lower, friction End.toDe, escape upper EndSlone. escape lower Mainllpring, Str, ll Pinion, escape Rolle r, and jewel pin Screw, winding wheel hub Scr e w, escape lower endstone Wheel. escape and pinion A ll other procurable parts $ame as Grade 087 27
8/0 SIZE AND 12/0 SIZE MOVEMENTS 8/0 SIZE MOVEMENTS Ca 7211 7234 7253 7254 7255 7205 7206 7209 7219 7215 5065 7279 72RO 7210 7267 2568A 72()9 7270 7272 7273 7275 7277 2983 7281 72S2 7218 7222 7221 7256 7257 6095 7229 7289 7233 7214 7258 2963 72R4 7293 7286 7288 7291 7295 7294 GRADE 747 Arhor. barrel Arhor, pallet Balance, with screws Balance. (with screws) and staff Balance, complete Barrel Barrel and arbor Cn ITI. balance upper endstone cap retaining Click Collet, hairspring ErHI"tonc Cap, balance upper Endstone Cap, balance lower Hub, winding wheel Jewel, center upper Jewel, center lower Jewel, third or fourth upper Jewel. third lower Jewel, fourth lower Jewel, escape upper Jewel, escape lower and pallet upper or lower Jewel, balance upper or lower Jewel, roller Stone, pallet, receiving Stone. pallet, discharging Lever. clutch Lever, setting l\lain"pl'ing. Stl'. 9 Pallet and fork l allet, fork and arbor Pin, banking Pinion, cannon Pinion, cannon, long for spherical dial Pinion, escape Pinion, winding R.ogulator Roller, combination, complete Serew, balance Screw. balance lower cap Sere w, bridge or balance cock Sercw, click Sere w, dial foot Screw, hairspring stud Screw, pallet bridge 7297 7294 7300 7293 7220 7225 7240 7261 7227 7226 6266 7245 7248 7250 7252 7241 7283 7242 7216 7207 7208 7211 7234 7253 7254 7255 7205 7206 7209 7219 7215 5065 7279 7280 7210 *7367 2568A 7269 7270 7273 7275 iuaterial Screw, ratchet wheel Screw, setting cap spring Jewel, escape lower and pallet upper or lower Screw, sotting lever 7277 Jewel, balance upper or lower 2983 Jewel, roller Screw, winding wheel hub 7281 Stone. pallet, receiving Spring. click 7282 Stone, pallet, djscharging Spring, clutch lever 7218 Lever, clutch Sr.ring, setting cap Spring, hair, Elinvar Extra 7222 7221 Lever, setting Mainpr ing StatT, balance *7356 Pallet and stones Stern, winding *7357 Pallet, complete 6095 Pin. banking *7329 Pinion, cannon Wheel, center and pinion *7333 Pinion, escape Wheel. third and pinion Wheel, fourth and pinion Wheel, escape and pinion 7214 *7301 7258 Pinion, winding PI a teo thrust ReJl:ulator Wheel, hour 2963 Roller, combination, complete Wheel. hour, long pipe for spherical dial 72R4 Screw. balance 7293 Sere w, balance lower cap Wheel, minute 7286 Sere w, bridge or balance cock Wheel. setting 7288 Screws. click Wheel. ratchet Wheel, winding 7291 7295 Screw, dial Screw, hairspring stud 7294 Screw, pallet bridge 7297 Screw, ratchet wheel GRADE 748. 7294 7293 Screw, setting cap spring Screw, third lower jewel plate 7300 *7302 Screw. setting lever Screw, thrust plat-e Arbor, barrel Arbor, pallet; Balance, with screws Balance. (with screws) and stafr Balance, complete Barrel Barrel and arbor Cam, balance upper endstone retaining Click Collet, hairspring Eodstone Cap, balance upper Endstone Cap, balance lower Hub, winding wheel Jewel, center upper Jewel, center lower Jewel, third, fourth or fifth, upper Jewel, third or fifth lower Jewel, escape upper cap 7293 7220 7225 7240 7261 7227 *7303 7226 6266 *7345 *7348 *7350 *7352 7241 7242 7216 7207 7208 7304 Screw, winding wheel hub Spring, click Spri "g, clutch level' Spring, setting cap Spring, hair, ElinlJar Extra Staff, balance Staff, flfth-compiete with wheels Stern, winding Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel. escape and pinion Wheel, hour Wheel, minute Wheel. setting Wheel, ratchet Wheel, winding Yoke, bridge, afler serial number CY80600 *Parts applicable to Grade 748 only. 12/0 SIZE MOVEMENTS 4020 4055 4000 4001 4002 4014 4015 4013 4140 4135 4115 4010 4040 4041 4019 4021 4022 4025 4026 4029 4033 4034 4031 4035 GRADE 401 Arbor, barrel Arhor, pallet; Balaneel, with screws Balance (with screws) and Sta ff Balance, complete Barrel Barrel and Arbor Cap, setting and minute wheel Click Collet, hairspring Huh. winding wheel Jewel. balance upper jewel, balance lower Jewel, center upper Jelwel, center lower jewel, third upper Jewel. third lower jewel, rourth upper Jewel, fourth lower Jewel, intermediate pinton upper Jewel, Intermediate pinion lower Jewel. escape upper Jewel, escape lower 4036 4038 40.'')2 4047 4049 4050 4051 4044 4045 4128 4104 4105 4148 4053 4134 4133 4106 4113 4153 4153A 4160 4155 4154 4156 4176 J... wel, pallet upper Jewel. pallet lower J.. wel, roller EDdstoDe, balance upper End",tone, balance lower StoDe. pallet, receiving StoDe. pallet. discharging Lever, setting Lever. clutch Mnin",prin,v:. Str. 12% Pallet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion. escape Pinion, winding Pinion. intermediate Regulator Roller, combination, complete Serflw, balance Screw, meantime Screw. banking Ser... w, bridge Screw, case Screw, balance cock Serew, pallet bridge 4173 4175 4157 4179 4174 4166 4159 4171 4170 4141 4142 4116 4111 4150 4126 4149 4077 40R6 4092 4097 4069 4070 4118 4136 4122 Serew, setting or minute wheel cap Screw, hairspring stud Screw, click Screw. winding wheel hub Screw, ratchet wheel Screw. center lower jewel Screw, dial foot Screw, clutch lever Screw, setting lever Spring, click Spring. clutch lever Sr.ring. hair Staff, balance Stem, winding Washelr, winding wbeel hub Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel. escape, stool and pinion Wheel, hour Wheel, mlnute Wheel. ratchet Wh... el, setting W heel, winding 28
29 14/0 SIZE AND 18/0 SIZE MOVEMENTS 14/0 SIZE MOVEMENTS Cot. 5011 2934 5053 5054 5055 5005 5006 5013 2.119 5015 5065 5079 5080 5093 5010 5077 5067 5068 S068A 5073 5074 song 5072 5075 5076 5069 5070 2983 508 1 50R2 5018 5022 5056 5057 2990A 5029 5089 5033 5014 5058 2963 5084 2'90 5086 5087 50.4 5096 2387 5091 5092 GRADE 980 Arbor. barrel Arbor. pallet Balance. with screws Balance (with screws)pand StafT Balance, complete - Barrel Barr.. 1 and Arbor CO P. setting wheel C lick Collet. bairspring End.. lone Cap, balance upper End8tonfl Cap, balance lower, before 0177001 Endfllonfl Cap, balance lower, after 0177000 Hub. winding \vheel Jewel, balance upper or lower Jewel, center upper Jewel, center lower. be/ore 0870701 Jewel. center lower. un,s'et, aller 0870700 J e wel. escape upper J e w el. escape lower Jewel, rourtb upper Jewel. fourtb lower Jewel. pallet upper Jewel. pallet lower Jewel. tbird upper Jewel. thlrd lower Jewel. roller Stone. pallet, receiving Stone, pallet, discharging Lever. clutch Le.. er, setting Pallet and Fork Pal1et, Fork and Arbor l';n. banking P inion, cannon Pinion, cannon, long, for spherical dial Pinion, escape )'inion, winding Reguilltor Roller, combination Screw, balance Screw, banking Screw, balance cock Screw. bridge Screw, pallet. bridge Screw, setting wheel cap Screw, ctick Screw. dial root Screw. balance upper cap Cjlt. 5096 5085 5000 5096 5096 5095 5097 5098 2320 5025 5061 5021 5040 50.9 5027 5026 5066 5045 5052 5048 6050 5041 5083 SQ42 5007 5016 5008 Cral, 5080 5029B 2529A 5034 5062 2996 5096 5012 5063 5042A 5045B 2541 5017 itlalerial Screw. ba.lance lower cap, before No, G!77001 Screw, balance lower cap, after No, G277000 Screw, setting lever Screw, setting cap spring Screw, set.ting lever spring Screw. hajrspring st.ud Screw. r atchet. wheel Screw. winding wheel Spring, click Spring. clut.ch lever Sprinl{. balr. ElinTJar Extra Spring. main. St.r. 11 h-fm Spring. setting lever Spring. setting cap StafT, balance St.em, winding Stud, h airspring Wheel. center and pinion Wheel. escape and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, hour, r egular Whecl, hour, long pipe, for spherical dial Wheel, minute Wheel, ratchet Wheel, setting Wheel, winding Mraterial GRADE 980A EndetODe CaP. ba.lance lower I'inion, cannon PiDlon, minute band Poet. auxjijary minute wbeel POllt. main hand Screw. auxiliary minut-e wheel spring Screw. jewel. balance lower cap Sprin,;, auxiliary minute wheel Wal!lher. h our wbeel Wheel, auxiliary minute Wheel, center and pinion Wheel. h our Wheel, minute All other procurable parts same as Grade 980 Cal, 5009 SaM 5063 5043 5045B 5090 5017 503.5 Cal. 5036 5080 5037 5039 5033A 5038 5085 5052A 5007A 5023 5008A 5024 Crat. 5078 5093 5036 5080 5037 503. 5O:J3A 5071 5085 5038 5085 5052A 5OO7A 5008A Materiral GRADE 980B Pinion, cannon I'ost., main hand Washer. hour wheel Wheel, auxiliary mlnute Wheel, center and pinion Wheel. hour Whe"I, minute Wheel, minute hand All other procurable parts same as Grade 980 ltlaterial GRADE 982 End"tone Cap. escape upper Endlltone Cap. escape lower Jewel. escape upper Jewel, escap'e lower I'inion, escape Ser.. w. escape upper cap Screw. escape lower cap Wheel. escape and pinion Wheel, ratchet. before J8S001 Wheel. ratcbet, after J8S000 Wheel. winding. before J 8S001 Wheel. winding, after No, J8S000 All other procurable part.! same as Grade 980 itlrater'ral GRADE 982M End"tooe Cap, balance upper Endlltone Cap. bala.nce lower Endlltone Ca p. escape upper End"tone CaP. escape lower Jewel, escape upper Jewel. escape lower Pinion, escape Regulator Screw, balance lower cap Serew. escape upper cap Screw. escape lower cap Wheel. escape and piniod Whet'll, ratchet Wbeel. winding All other procurable parts same aj Grade 980 18/0 SIZE MOVEMENTS Cot. 2711 2734 2753 2753E 2754 2754E 2755 2755E 2705 2706 2713 2319 2715 5065 2710 2777 2778 2779 itlaterial GRADES 989 989E Arbor. barrel Arbor, pallet Balance, wltb screws, Grade 989 Balance, with screws, Grade 989E nolance (with screws) and StafT, Grade OBO naillnee (wit.b screws) and StafT, Grade 980E Balance, complet-e, Grade 089 Bolanee, complete, Grade 080E Barrel Darrel and Arbor Cap, intermediate C lick Collet. hairspring Hub, winding wheel Jewel, balance upper Jewel, balance lower Endlltoue Cap, balance upper Cral, 2780 2767 2768 2769 2770 2773 2774 2975 2776 2783 2781 2782 2722 2721 2756 2757 2729 2733 2714 2758 2963 2784 2784A 2787A 23.0 2787 it/oleri"l End,tone Cap. balance lower J.. wel, center upper J.. wel, center lower Jewel, third or rourth upper Jewel. third or fourth lower Jew.. I, escape upper J ewt'll, escape lower Jewel, pallet upper Jewel. pallet lower Jewel, roller Stolte, pallet receiving Stone, pallet. discharging Leve... selting Mainllpring. SU. 8J.{ Pallet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion. escape Pinion, winding R egulator Roller, combination, complete Screw. balance Serew. balance. meantjme Screw. balance cock Screw, banking Screw, bridge Cal, 2796 2794 2795 2387 2790 2797 2998 2793 2700 2789 2320 2761 2761E 2725 2727 2726 2766 2745 2748 2750 2752 2741 2742 2707 2716 2708 I"teri(l.l Ser.. w. setting wheel bridge Sc.. ew, pallet bridge Serew. hairspring 8tud Scr.. w. click Se... w. diaj foot Se.. e w. ratchet wheel Screw. winding wheel hub Serew. jewel balance lower Screw. setting lever Screw, setting lever spring Spring. click Spring. hair. Grade 089 Spring, hair, Grade 980E Spring. sett.ing lever Starr, balance Stem. winding StU'd. hairspring Wheel. center and pinion Whe.. I, third and pinjon Whed, fourth and pinion Wheel. escape and pinion Wheel, hour Whet'll. minute Wh.. el, ratchet Wheel.lntersetting Whe.. l, winding
20/0 SIZE AND 21/0 SIZE MOVEMENTS 20/0 SIZE MOVEMENTS Cot. 2911 2934 2953A 2954A 2955B 290SA 290.A 2919 2915 2965 5010 2979A 2980A 2977A 2967A 2968A 2969A 2970A 2973A 2974A GRADE 997 Arbor. barrel Arbor, pallet Balance, with screws Balance (with screws) and Staff Balance. complete Barrel Barrel and Arbor Click Cluteh Collet. hairspring Hub, winding wheel End. tone Cap. balance upper End.tone Cap, balance lower Jewel, balance upper Or lower Jewel. center upper Jewel, center lower. unset Jewel. third or fourth upper Jewel. third Or fourth lower. unset Jewel, escape upper Jewel. escape lower. unset Cot. 2975A 2976A 2983 2981 2982 2922 2918 2921 2956A 2957A 2990A 2929A 2933 291' 2958A 2963 2984 2986 2992 2987 2994 2996 2995 Jewel. pallet upper Jewel, pallet lower. u.nset Jewel, roller Stone. pallet receiving Stone. pallet discharging Leyel', setting Level', clutch Mainspring. Str. 7.J..2 Pallet and Fork I'allet, Fork and Arbor Pin, banking Pinion, cannon Pinion. escape Pinion, winding Regulator 1I0llel', combination, complete Screw. balance Screw, balance cock Screw. balance upper endstone cap Screw. barrel or train bridge Scr ew. pallet bridge Sel'ew, setting cap spring Screw, hairspring stud Cot. 2988 2998A 2997 5096 5091 2900 2989A 2920 2925 2940 296iD 2927 2926 2966A 2945B 2948A 2950A 2952 2941A 2942 2916 2908A 2907A Screw, click Screw, winding wheel hub Screw, ratchet wbeel Screw, balance lower jewel Screw, dial foot Screw, setting lever Screw, clutch lever spring Spring. click Spring. clutch le ver Spl'i ng. setting cap Spriug. hair St.afT, balance, S.R. St.em. winding Wheel, center and pinion Wheel. third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wh... el. minute Wheel. intermediate Wheel, winding Wheel, ratchet GRADE 721 Cautian: The following parts for Grade 721 are not InterclJangeable with those in the 995 or 995A movements: Wheel. center. and pinion; Wlleel. third, and pinioll; 'Theel, fourth, and pinion; Wheel. escape, and pinion, jjfaterial 2911 2934 2953A 3254 3255 2905A 2906A 2919 2915 296S 5010 2979A 3280 6278 2967 2968A 2969 2970A 296S 2970A 2973 2974A 6275 2983 2981 2982 2918 2922 2921 2956 2957A 2990A 2929A 3233 2914 6258 2963 2984 2992 S096 2986 2987 299' 2988 2790 2900 6295 2989A 5096 2997 2998A Arbor. barrel Arbor, pallet Balance, with SCrews Ba.lanee (wit h screws) and Staff Balance. complete Barrel Barrel and Arbor Click Cluteb CoUet Hub, winding wheel End. tone Cap, balance upper End.to ne Cap, balance lower Jewel, balance upper or lower. unsel Jewel. center upper Jewel. center lower, un.!el Jewel. third upper Jewel, third lower, un.!et Jewel, fourth upper Jewel, fourth lower, unset Jewel, escape upper Jewel. escape lower, unset Jewel. pallet upper or lower, unset Jewel, roller Stone. pallet, receiving Stone. pallet. d1scharging Leyel', clutch Leyel', setting Main.pl'ing, Str. 7.J..2 MM. Pallet and Fork Pallet. Fork and Arbor Pi n, banking Pinion. cannon Pinion. escape ' Pinion. winding Regulator Rolle.l'. combination Screw. balance Screw. balance upper endstone cap Screw, balance lower endst<lne cap Screw. balance cock Screw. bridge. barrel or train Screw. pallet bridge Sel'ew. cuck Se.l'ew. dial foot Screw, setting lover Screw, hairspring stud / Screw. clutch lever spring Sel'ew. set;ting cap sprin&, Screw. ratchet wheel Screw. winding wheel 21/0 SIZE MOVEMENTS Cot. 2920 2925 3261 2940 3227 2926 3266 3245 324. 3250 3252 2941A 2942 2907A 2916 2908A 7411 2934 7453 7454 7455 7405 7406 7419 7519 7415 2965 7479 74 80 7410 6267 0268 6269 6270 6273 6274 6275 6278 2983 7481 1482 74-18 7422 74.21 7456 7457 2900A 7429 6229 7433 7414 7458 IUaterial Sprins. click Spring. clutch lever Sprins, bail', Elintlar Extra Spring. setting cap Staff. balance SteDl. winding Wheel. center and pinion Wheel, third and pinion Wheel. fourth and pinion Wheel, escape and pinion Wheel, hour Wheel. minute Wbeel, ratcbet Wbeel. setting Wheel, winding GRADE 750-751 &Iaterial Arbor, barrel Arbor, pallet Balance, with screws Balance, (with screws) and stair Balance. complete Barrel Harrel and arbor Click, Grade 750 Click, Grade 751 Collet, hairspring Endstone Cap. balance upper Endst.one Cap, balance lower II u b. winding wheel Jewel, center upper Jewel. center lower lewel, thlrd or fourth upper J ewel. third or fourth lower Jewel. escape upper Jewel, escape lower lewel, pallet upper or lower J ewel, balance upper or lower Jewel. roller Stone, pallet receiving Stone, pallet discharging Level', clutcb Lever. setting Main6pl'ing. strength 6}i Pallet and fork Pallet. fork and al'bot' Pin, banking Pinion, cannon-used on applied component dials Pinion, cannon-used on plain transfer dials Pinion. escape Pinion, winding Resulatol', Grade 750 ea. 7558 2963 7484 7492 7493 7486 7488 7491 7495 7494 7400 7493 7420 7425 7440 6261 7427 7426 6266 7445 7448 7450 7452 7441 6241 6242 7416 7407 7507 7408 7508 Cau.tion: 2911 2934 2953A 2954 2955 2905 2906 2919 291S 2965 2910 2979 2980 2977 hlaterial Regulntol', Grade 751 Rollcl', combination, complete Sel'ew, balance Screw, balance upper cap Screw, balance lower cap SCI'CW, bridge or balance cock Sel'eW, click or ratchet wheol SCI'CW, dial foot Screw, hairspring stud SCI'CW, pallet bridge or setung cap spring Serew, setting lever Screw, winding wbeel hub Spring, click Spring, clutch lev:er Spl'iug. setting cap Spring, bair. EUntlar Extra StafT, balance Stem. winding Whecl, center and pinion Wbecl, third and pinion Whecl, fourth and piojon Wheel, escape and pinion Whecl, hour-used on appued component dials Wheel. hour--uscd on plain transfer dials Wheel. minute Whecl, sotting Wheel. ratchet. Grade 750 Wbecl. ratchet, Grade 751 Wheel, winding, Grade 750 Wheel. winding. Grade 751 GRADE 995 The following parts for Grade 995 are not interchangeable with those in Grade 721: 'Vheel, center. and pinion; Wheel, third, and pinion; Wheel, fourth, and pinion; Wheel, escape, and pinion. Mnterial Arbor, barrel Arbor. pallet Balance. with screws Balanee (with screws)' and Staff Balance, complete Barrel Barre l and Arbor Click Collet. hairspring Hub. winding wheel Endstone Cap. balance upper Ends tone Cap, balance lower Jewel. balance upper 30
31 21/0 SIZE AND 22/0 SIZE MOVEMENTS Ca. 2978 2967 2968 2969 2970 2972 2973 2974 2975 2976 2983 2981 2982 2922 2918 2921 2956 2957A 2929 2933 2914 2958 2963 2984 2992 2990 2986 6211 2934 6253 6254 6255 6205 6206 6219 6215 2965 2979A 6280 6210 6267 6268 6269 6270 6273 6274 Jewel, balance lower Jewel, center upper Jewel, center lower Jewel, third or fourth upper Jewel, tb1rd lower Jewel, fourth lower Jewel, escape upper Jewel, escape lower Jewel, pallet upper J ewel, pallet lower lewel, roller Stone, pallet, receiving StODtI, pallet, discharging Le'f'er, setting Le... er, clutch Main.pring, Str. 7J.i PaUet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion, escape Pinion, winding Regulator Roller, combination, complete Screw, balance Screw, balance upper endboone cap Screw. banking Screw. balance cock ltfaterial GRADES 9Il 9IlM Arbor, barrel Arbor, pallet Balance, with screws Balance (with screws) and Staff Balance, compiete Barrel Barrel and Arbor Click Collet, hairspring End. tone Cap, balance upper, Grade 911M End. tone Cap, balance lower, Grade 911M Hub. winding wheel Jewel, center upper Jewel, center lower Jewel, third or fourth upper Jewel, third or fourth lower Jewel, escape upper Jewel, escape lower 21/0 SIZE MOVEMENTS Cot. 2987 2994 2996 2995 2988 2998 2997 2993 2790 2900 2989A 2920 2925 2940 2961 2927 2926 2966 2945 2948A 2950 2952 2941A 2942 2916 2908 2907 MCltel'icd Screw, barrel or train bridge Screw, pallet bridge Screw, setting cap spring Screw, hairspring stud Screw, click Screw, winding wheel hub Screw, ratchet wheel Screw, balance lower jewel cap Screw, dial foot Screw, setting lever Screw, clutch lever spring Spring, click Spring, clutch lever Spring, setting cap Spring, hair Staff, balance SteD1., winding Wheel, center and pinion Wheel, third and pinion Wbeel, fourth and pinion Wbeel, escape and pinion Wheel, hour Wheel, minute Wheel, intermediate Wheel, winding Wheel, ratchet 22/0 SIZE MOVEMENTS ltlaterial 6275 Jewel, pallet upper or lower 6277 Jewel, balance upper or lower, clia..80, hole 8J.i. before T31001 6278 Jewel, balance upper or lower. unset. dia..90. hole 7. after T31000 2983 Jewel, roller 2981 Stone, pallet, rece1vlng 2982 Stone. pallet, discharging 6218 Le.-er, clutch, Grade 911 6217 Le-.er, clutch, Grade 911M 6222 Le-.er, setting 6221 M.. in.pring, Str. 6 2956 Pallet and Fork 2957A Pallet, Fork and Arbor 2990A Pin, ba.n1dng 6229 Pinion, cannon 6233 Pinion, escape 6214 Pinion, winding 6258 Regulator, Grade 911 6259 Regulator, Grade 911M 2963 Roller, combination, complete 6284 Screw, balance 2992 Serew, balance upper cap 5085 Screw, balance lower cap 6286 Screw, bridge or balance cock 6288 Screw, click, Grade 911 GRADE 995A Caution: The following parts for Grade 995A are not interchangeable witil those in Grade 721: Wheel, center, and pinion; 'Vheel, third, and pinion; Wheel, fourth, and pinion; Wbeel, escape, and pinion. ltlaterial 2955B 6010 2979A 2980A 2977A 2929A 2958A 2998A 6096 2989A 2961A 3266 2945A 2941A 2908A 2907A 6288 6291 6295 2994 6288 5096 6300 6298 6220 6225 6240 6239 6261 5027 5027A 6226 6266 7445 7448 7450 7452 6241 6242 6216 6207 6208 Balance, complete Hub, winding wheel Ends tone Cap, balance upper Eudl!ltone Cap, balance lower Jewel, balance bole, upper or lower Pinion, cannon Regulntor Screw, winding wbeel hub Sere..., balance lower jewel cap Screw, clutch lever spring Spring, hair. breguet Wbeel, center and pinion Wbeel, hour Wheel, winding Wheel, ratchet All other procurable parts same as Grade 996 luateriol Screw, click, Grade 911M Screw, dial foot Screw, hairspring stud Screw, pallet brldge Screw, ratchet wheel Screw, setting cap spring Screw, setting lever Screw. winding wheel hub Spring, click Spring, clutch lever Spring, setting cap, Grade 911 Spring, setting cap, Grade 911M Spring, hair, Elintar Extra Staff', baiance, before T31001 Stuff, balance, after T 31000 SteD1., winding Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, setting Wheel, ratchet Wheel, winding ALWAYS USE GENUINE HAMILTON MATERIAL
MAINSPRING CHART Always order Hamllton Ma.1nsprings by Catalog N umber and Strength. Use the figure under the "Ml1lJmetcrStrength" column t-o indicate desired strength on steel mainsprings: on DllnaJJar use required strength number and catalog number. Mainsprings identified by two different Catalog Numbers may be procured by using either number. Catalog MilIiDleter Dennieon Length Strength Width Strength Width Inehes Style Brace Catalog MilliDleter DenDi.oD Strength Width Strength Width Length Inehell Style Brace 14 15 15 15 232 317 317 } 3 18 3 17 318 534 534 534 534 534 534D 534B 534B 187'2 20 20M 21M 18 17 18 I' I'M 15 15 M 16 16M 17 15 15M 16 18 SIZE MOVEMENTS 3.18 2.87 2.87 2.87 3.18 4M 3 M 3Ji 2M 5 23 I. I. I. 22 16 SIZE MOVEMENTS 2.83 2.83 2.83 2.83 2.83 2.83 2.83 2.83 2.83 3.00 3.00 3.00 6 5 4 3J{ 7 6 M 6M 6Ji 6 7 6J{ 6 M I. I. I. I' I' I' I. 19 I' 21 21 21 25 21 21Ji 21Ji 25 21 21 Ji 21Ji 21U 20 20M 20M 20 20 23M 23 M 23M M.B: T T T T T T T 1721 } 1921 2321 2521 2621 2621 7221 7221 7221 4128 13M 12M 12 llm II 8M 'M 12M 6/0 SIZE MOVEMENTS 1.34 1.34 1.34 1.34 1.34 8M 9Ji 9 M 9J{ 10 5 5 5 5 5 8/0 SIZE MOVEMENTS 1.50 1.50 1.50 12M 12 llm 5 5 5 12/0 SIZE MOVEMENTS 1.18 9Ji 3 14/0 SIZE MOVEMENTS 13M 13 13M T T T T T M.B. 35433 35434 35435 Strength 350 (Minimum), Dynooor Strength 370 (Standard), Dyna!J4r Strength 300 (MaxiOlum), Dynoror 29M 29M 2'M 5021 5021 II llm 1.30 1.30 10 9 4 4 llm II 1228 3028 1228 3028 1228 3028 3328 6021 6021 6021 1 12 SIZE MOVEMENTS 17 1.72 6 8 17M 1.72 8 21Ji 21 18 1.72 5 8 21Ji 16 16 17 18 12 (THIN) SIZE MOVEMENTS 1.34 6 10 SIZE MOVEMENTS 1.50 1.50 1.50 6M 6 5 5 5 6 IBM 17N 17N 1734' 2721 2721 2721 2921 2921 2921 2921 2921 2921 7421 7421 7421 7421 8 8M 18/0 SIZE MOVEMENTS 1.12 1.12 1.12 13 12 M 12 2 2 2 ll M 10M loji 20/0 AND 21/0 SIZE MOVEMENTS 6M 7 7M 8 8M 6Ji 6M 6U 7 1.00 1.00 1.00 1.00 1.00 1.00 1.40 1.40 1.40 1.40 14M 14 13 M 13 12M 12 1 1 1 ll» 10 M 'J{ 9 8M 8 8M 8M 8M 8M T T T o SIZE MOVEMENTS 22/0 SIZE MOVEMENTS 1535 1536 1536 14 M 14M 15 1.38 1.38 1.38 7M 7M 7 14 14M 14J{ T T 6221 6221 6221 6 6M 7 1.40 1.40 lao 15 14 M 14 5 5 5 8Ji 7J{ 7Ji 32
d.l CASE REPLACEMENT PARTS SERIES I d.l MODELS For service information ask for Service Bulletin 201-D BJANDON 10 K Gold-fi lled LAKGDON 10 J( Gold-filled LANOE 14 J{ Gold N ORD ON 10 j( Gold-filled NOl{DE 14 /( Gold SERIES I d.l CASE REPLACEMENT PARTS STEELDON Stuinless Steel Model Crown-S leln Assemhly C rystal Gasket, Crysla l Gaskel, Bezel Key- S te IB Brandon Langdon Lange Nordon Norde Steeldon 700 701 705 706 705 706 709 710 702 703 707 703 707 703 711 703 I 704 E 708 &1-- 708 708 SERIES II d.l MODEL For service information ask for Service Bulletin 205 VARDON, Stainless steel NOTE : P a rts fo r any c1l mod e l not s hown in this catalog can be secured from your materials wholesaler. Model CASE REPLACEMENT PARTS Crown-StcIn Plastic Crystal- Hezel IlcBectot Assembly Crystal Gaskct lung K ey-stein Vardon 712 713 714 715 I 708 33
HAMILTON WATCH DIAL STYLES 18 SIZE HAMILTON WATC H D I A L S Dials for every size and grade Hamilton Watch are available for replacement purposes, The dials illustrated do not represent t he complete selection of styles available for any given grade 01' size; they are however, representative of the several dia'erent designs available, See pages 37 thru 41 for listing, Orders for dials should employ the catalogue number and, whenever possible, t he model name of the watch, When dial identity is impossible or difficult send old dial which will be matched as nearly as possible from our inventory. 529 16 SIZE 535 537 536 502M 12 SIZE 39 38 62 50 10 SIZE E4 El E 16 E2 34
8' HAMILTON WATCH DIALS 6/0 SIZE H041 H070 046 052 012 058B 058A 058 0118 098 097 0113 0108 0107 053 050 041 0111 0112 01 010M 0106 8/0 SIZE 0143 0145 0144 0153 i 12 I I - 2 it} -_. 2 9 0 3 3 il 7 ' 5 R120 R146 R154 R155 Rl61 R166 R177 R211 P.223 R228 14-/0 SIZE ill 112! ()... ". 2 'j 0 S 0 16 '! ' is D9 DI0 D41 D42 DOlO D021 ill 1\2! () " o s 16 r:- ', S =l D61 D62 D70 D98 35
HAMILTON WATCH DIALS I: m.... 0 D I: 11 '= II C D039 D47 D65 D93 D026 C D62 D96 D033 D61 C f!-'j 20/0 SIZE ", -g-. 1F'.2.Jl!:O -- z: 00 ' "' 0 I 10. i. 0 S! 0.D "j 1"' 'l l,!; i!.2!j 7d FI5 Fll F I 2 FI4 F 5 F 17 a::; 21/0 SIZE r=,.".. \1 > 1 n!::;). \.'I!... q.-! a=... &:1 I; 11 " J::! C38 C013 C42 C51 C040 C70 C20 C50 C41 11121 to- 2 9 0 ' 76 5 C034 C72 C7 CI7 C3 CI 9 C25 C066 C025 C48 o..... lij!y' n(;\. 'J::t 1,\ I f o "t <- 1 I-...- l.,. -;- '...... -? ' I: I' :! -Z-." _.'l - 0 - Il J!: I 0 t d, B 6 "g. 0 - K207 K220 K266 K 23 4 K235 ](239 K267 J U.. W.ro..!";I} \LUJ \;.!d'u,5:'; I., 22/0 SIZE m rn... 'b.,.l, n.,"'::\ ;f.!7;'; Cf-t r.: ". s!o-- 10) ;;- 0., '", I: 0 >' '".,. 0! t7 f2 ;) Gl2 G043 GOO3 G6 G020 G9 GIO? " " _...,/ f[tl].; C \ XI I Eiii2i I -- -a [;;- - 0 - l.- } 903.., 0,3; /, :'$ -I! I VI \ l!...!...!.j 'r.j GOl5 G4 GOO2 G37 G063 G2 Gl 36
DETAILED DIAL DESCRIPTIONS Glossary of Abbreviations A.G.N.-Applied Gold Numerals A.G.M.-Applied Gold Markers A.R.N.-Applied Rhodium Numerals B.F.-Black Figures Lum.-Luminous Figures W.F.- White Figures B.M.-Blind Man Numerical L.A.-Light Arabic D.S.- Double Sunk S.S.-Single Sunk S.A.-Strong Arabic a.p.-canadian Pacific H.G.- Heavy Gotbic H.A.- Heavy Arabic Number luodel 529' Round 505 Round 507 Round 508 Round 510 Round 511 Round 512 Round 525 Round 530 Round 531 Round 535* Round 536' Round 537' Round 50-024 Round 50-080 Round 50-081 Round 50-082 Round 50-084 Round 50-090 Round 502M' Round 519M Round 67 Round 69 Round 96 Round 97 Round 15 Round 3AR Round 24 Round 38' Round 39' Round 47 Round 50' Round 51 Round 62' Round 62A Round 67A Round 69A Round 18 16 12 Description Number Model Description SIZE (GRADE 400) B.F. Silver, 14B Round RF. Silver 59B Round A.G.N. Silver SIZE 10 SIZE B.M., S.S. Enamel L.A., D.S. Enamel El* Round B.F. Silver L.A., S.S. Enamel E2' Round A.O.N. Silver S.A., S.S. Enamel E3 Round A.G.M. Silver B.A., D.S. Enamel E4' Round B.F. Silver B.A., S.S. Enamel E6 Round B.F. Silver C.P., D.S. 24 Hour Enamel E7 Round A.G.N. Silver S.A., D.S. Enamel E13 Round A.G.N. Silver,C.P., S.S. Enamel E14 Round Etched Two Tone D.S. Enamel23J Rly. Spec. E15 Round Etched Coral H.G., D.S. Enamel Rly. Spec. E16* Blaine A.G.N. Rhodium Numerical D.S. Enamel Rly. Spec. E044 Elton-Hardy A.G.N. Silver H.A., S.S. Numerical Enamel E045 Hale A.G.N. Silver H.G., S.S. Enamel E046 Jefferson B.F. Gilt B.M., S.S. Enamel E047 Stanley Etched Silver B.M., S.S. Enamel E048 Elton-Hardy B.F. Silver B.M., S.S. Enamel E049 Morris Etched Silver B.M., S.S. 24 Hour Enamel EOn Elton A.R.N. Coral H.A. Silver E073 Stanley Etched Coral H.G. Silver H.G. Silver H.G. Silver 0 SIZE H.G. Silver 1554 Round L.A. Enamel H.G. Silver SIZE 6/0 SIZE 070 Grade 986A B.F. Silver B.F. Silver 073 Grade 986A B.F. Silver A.a.N. Silver 078 Grade 986A Lum. Silver A.G.N. Silver 078A Grade 986A B.F. Silver B.F. Silver 081 Grade 986A Lurn. Silver B.F. Silver 082 Grade 986A B.F. Silver Etched Silver 083 Grade 986A B.F. Silver A.a.N. Silver 084 Grade 986A Lurn. Silver A.a.N. Silver OlIA Barrel B.F. Silver A.a.N. Silver 013A Oval B.F. Silver Secometer Bi t 016 Piping Rock RF. Silver B.F. Silver 017A Hastings B.F. Silver B.F. Silver 018A Square B B.F. Silver Sbown on dial illustration pages 37
DETAILED DIAL DESCRIPTIONS Number Model Description Number Model Description 021 Coronado B.F. Silver 0108' Mason A.C.N. Silver a 027A Langley B.F. Silver 0112' Cushion A.C.N. Silver 029A Capt. Rice B.F. Silver 0114 Turner A.C.M. Silver Cl 035A Oakmontr B.F. Silver 0116 Winslow A.C.N. Silver Meadowbrook 0121 Watson A',C.N. Silver 040 Chatelaine B.F. Silver 0123 Turner B.F. Silver 046 Tonneau B.F. Silver 0123A Turner A.C.N. Silver. Oi 049A Whitney B.F. Silver 0125 Morley A.C.N. Silver 053' Greenwich B.F. Silver 0127 Lawrence A.C.N. Silver 055 Raleigh B.F. Silver 0129 H eyward A.a.N. Silver 056 Gladstone B.F. Silver 0131 Merritt A.C.N. Silver 058' Clinton B.F. Silver 0133 Sidney A.C.N. Silver III 059 Perry B.F. Silver 0135 Harris A.C.N. Silver 063 Webster B.F. Silver 0137 Reagan A.C.N. Silver Oi 066 Mt. Vernon B,F. Silver 0139 Dodson A.O.N. Silver 068A Putnam B.F. Silver 0143' Endicott A.O.N. Silver 094A Crant B.F. Silver 0146 Medwick A.C.N. Silver 096A Lee B.F. Silver 0148 Bagley A.C.N. Silver 0103 Drake B.F. Silver 0150 Russell A.C.N. Silver 0105 Scott B.F. Silver H031 Douglas A.R. N. Coral CI 0106A' Prescott B.F. Silver H041' Martin A.C.N. Silver ell 0110 Square B.F. Silver H062 Russell Etched Cilt 0111' Cushion B.F. Silver H070' Martin A.R.N. Coral ell 0113' Mason B.F. Silver H095 Vancott A.C.N. Silver 0115 Turner B.F. Silver 01' Cushion Lurn. Silver 0117 Ellsworth B.F. Silver 07 Square Lurn. Silver Cl 0118' Dixon B.F. Silver 011 Barrel Lurn. Silver 0120 Randolph B.F. Cilt 012- Tonneau Lurn. Silver 0123A Turner B.F. Silver 013 Oval Lurn. Silver 0124 Watson B.F. Silver 017 Hastings Lurn. Silver 0126 Morley B.F. Silver 018 Square B Lurn. Silver 0128 Lawrence B.F. Silver 026 Gladstone Lurn. Silver CI1 0130 Heyward B.F. Silver 027 Langley Lurn. Silver 0132 Merritt B.F. Silver 029 Capt. Rice Lurn. Silver 0134 Sidney B.F. Silver 031 Raleigh Lurn. Silver 0136 Harris B.F. Silver 035 Oakmont Lum. Silver 0138 Reagan B.F. Silver 041' Greenwich Lurn. Silver 0140 Dodson B.F. Silver 045 Perry Lurn. Silver 0144 Endicott B.F. Silver 049 Whitney Lurn. Silver 0147 Medwick B.F. Silver 058A' Clinton Lurn. Silver 0149 Bagley B.F. Silver 062 Webster Lurn. Sil ver 0151 Russell B.F. TW<rTone 068 Putnam Lurn. Silver 0152 Endicott B.F. Two-Tone H089 Sentinel Lurn. Silver 0153' Sentinel (Secometer) B.F. Silver 094 Grant Lurn. Silver H023 Sentinel (Secometer) B.F. Silver 096 Lee Lurn. Silver H055 Russell Etched Coral 097' Dixon Lurn. Silver H088 Round \V.F. Black 0100 Scott Lurn. SHver 033 Langley A.G.N. Silver 0101 Drake LlJffi. Silver 047 Oakmont A.G.N. Silver 0107' Mason Lurn. Silver 050' Greenwich A.C.N. Silver 0145 Endicott Lurn. Silver 051 Perry A.C.N. Silver 052' Tonneau A,a.N. Silver 8/0 SIZE 057 Square B A.C.N. Silver 060 Webster A.C.N. Silver R120' Kirk A.G.N.-M. Silver C 061 Capt. Rice A.C.N. Silver R146' Glenn A.C.N. Silver 090 Putnam A.C.N. Silver R154 Neil A.G.N. Silver 092 Whitney A.C.N. Silver RI55' Eric A.C.N.-D. Silver 093 Crant A.C.N. Silver R161 ' Langdon Lurn. Silver 095 Lee A.C.N. Silver R166- Dunham A.C.N.-M. Silver 098' Dixon A.C.N. Silver RI77' Dexter A.G.D. M. Silver 099 Scott A.O.N. Silver R211 ' Raymon A.R.N. Silver 0102 Drake A.O.N. Silver R223- Clinton B.F. Silver 0106' Prescott A.C.N. Silver R228' Clinton \V.F. Black.Shown on dia11llustratlon pages ;r :I = 38
DETAILED DIAL DESCRIPTIONS Number Model Description Number Model Description 12/0 Contour A.C.N. Silver SIZE D57 D58 Linwood A.C.N. Silver 1202 Byrd D60 Otis A.G.N. Black 1201 Wilkinson Lum. Silver Lum. Silver D59 Otis A.C.N. Silver 1203A Andrew B.F. Silver D61" Dunkirk A.G.N. Black 1204 Stanley Lum. Silver D62" Dunkirk A.G.N. Silver 1204A Stanley B.F. Silver D64 Bowman A.C.N. Silver 1205 'Stanley A.C.N. Silver D65" Brock B.F. Gilt 1206 Livingston A.C.M. Silver D66 Foster A.C.N. Silver 1208 Wilkinson A.C.N. Silver D67 Winthrop A.C.N. Silver 1209 Byrd A.C.N. Silver D68 Wilshire B.F. Coral D69 Winthrop B.F. Coral and Gilt 14/0 SIZE D70" Ross A.G.N. Silver D7I Wilshire A.G.N. Silver D72 Wilshire B.F. Gilt DI Sherwood B.F. Silver D73 Ross B.F. Coral D2 Sherwood A.C.N. Silver D74 Winthrop B.F. Coral D3" Custer B.F. Silver D75 Ross B.F. Coral D4" Custer A.C.N. Silver D79 Stanford A.C.N. Silver D5 Ardmore A.G.M. Silver D80 Judson A.C.N. Silver D6 Wayne A.C.N. Silver D81 Judson B.F. Gilt D7 Calvin B.F. Silver D82 Vincent A.G.N. Silver D9" Nelson B.F. Silver D83 Touraine N urn. & Dots Silver DIO" Nelson A.G.N. Silver D85 Brock B.F. Gilt DII Carson B.F. Silver D87 Essex A.C.N. Silver DI2 Carson A.G.N. Silver D88 Seckron B.F. Silver DI3 Bartlett A.G.M. Silver D89 Seckron W.F. Black DI4 Lowell A.C.N. Silver D90 Boulton A.G.N. Silver DI5 Rutledge A.G.N. Silver D91 Paige A.G.N. Silver DI6 Richmond A.C.N. Silver D92 Paige Gilt Two Tone DI7 Boone A.G.N. Silver D93'" Midas Dot & Bar Silver DI8 Cabot A.C.N. Silver D94 Ross Coral and Chrome DI9 Seckron B.F. Silver D96" Midas Dot & Bar Coral D20 Boone B.F. Gilt D97 Essex A.G.N. Coral D21 Cabot B.F. Silver D98" Ross A.G.N. Coral D22 Seckron W.F. Black D99 Wilshire A.G.N. Coral D24 Cabot B.F. Silver DOO6 Rodney B.F.Gilt D25 Cabot B.F. Green D008" Myron A.O.N. Silver D26 Custer A.G.M. Silver DOlO" Lester A.O.N. Silver D27 Clark A.C.N. Silver DOlI" Barry A G.N. Silver D28 Clark B.F. Silver D021" Lester B.F. Silver D29" Pierre A.C.N. Silver D026" Norman Dot & Num. Silver D30 Dorsey B.F. Silver D028 Gilbert A.C.N. Silver D31 Dorsey B.F. Gilt D029 Lexington W.F. Black D32 Taylor A.GM. Silver D033" Norman B.F. Gilt D33 Taylor B.F. Silver D036 Gordon Dot & Bar Silver D34 Dorsey A.C.N. Silver D037 Wesley N urn. & Dot. Silver D39 Carlisle B.F. Silver D038 Donald A.G.N. Silver D40 Carlisle A.C.N. Silver D039" Alan A G.N. Silver D41* Sutton A.G.N. Silver D068 Rodney B.F. Coral D42" Sutton B.F. Silver D069 Myron A.G.N. Coral D43 Dickens A.C.N. Silver D45 Elliott A.O.N. Silver D46 Elliott B.F. Silver 18/0 SIZE D47" Talbott A.G.N. Silver D48 Cameron A.C.N. Silver BI Chevy Chase B.F. Silver D49 Ardmore A.C.N. Silver B4 Portia B.F. Silver D51 Bentley A.G.N. Silver B5 Portia B.F. Silver D52 Langford A.C N. Silver B6 Eugenie A.O.N. Silver D53" Cilman A.C.N. Silver B7 Mont.our B.F. Silver D54 Brooke A.C.N. Silver B8 Victoria B.F. Silver D55 Brooke B.F. Silver B9 Diane B.F. Silver D56 Allison A.G.N. Silver BIO Wellesley B.F. Silver.Shown on dial illustration pages 39
DETAILED DIAL DESCRIPTIONS 0 Number Model Description C C Number Model Description B13 Edgewood D.F. Silver C28 Anitra B.F. Silver B15 Bancroft B.F. Silver C29 Lois B.F. Silver Q B16 Linden Hall B.F. Silver C30 Claire B.F. Silver B17 Bryn Mawr B,F. Silver C31 Marcia B.F. Silver Bl8 Sargent B.F. Silver C32 Suzanne B.F. Silver B19 Suffolk B.F. Silver C33 Frieda B.F. Silver 0 B20 Bryn Mawr A.C.N. Silver C35 Selena B.F. Silver B21 Millay B.F. Silver C36 ViLma. RF. Silver B23 Gail B.F. Silver C37 Constance Etched Silver B24 Joan B.F. Silver C38' Melodie Etched Silver B25 Beatrice B.F. Silver C39 Elinor B.F. Silver B26 Barbara B.F. Silver C41' Martha Etched Silver B27 Emily B.F. Silver C42* Vera B.F. Silver B28 D evon B.F. Silver 043 Marietta Etched Silver B29 Berkely RF. Silver C44 Anitra. B.F. Silver B31 Berkely B.F. Silver C45 Dorian B.F. Silver B33 D evon B.F. Silver C46 Langtry D.F. Silver B34 Norfolk A.a.N. Silver 047 Christina B.F. Silver C48' Sonya. A.O.N. Silver C49 Lois A.G.N. Silver 20/0 SIZE C50' Vera A.G.N. Silver C51' Marlyn A.G.N. Silver CF2 Audrey Etched Silver C52 Estine A.G.N. Silver CF3 Maxine Etched Silver C53 Melita A.G.N. Silver F2 Lucille B.F. Silver C54 Rhoda A.O.N. Silver F3 Audrey B.F. Silver C55 Trilby A.O.N. Silver F4 Muriel B.F. Silver C56 Suzanne A.G N. Silver F5' Eileen B.F. Silver C57 Georgia A.G.N. Silver F7 Paula B.F. Silver C59 Cora A.O.N. Silver F8 Maxine B.F. Silver C60 Lady Lancaster B.F. Silver F9 Winona B.F. Silver C61 Lady Lancaster B.F. Silver FlO Celia. Etched Silver C62 Evelyn A.O.N. Silver Fll* Winona. Etched Silver C64 Julie A.O.N. Silver F 12' Muriel Etched Silver C65 Rita Gilt & Black F I3 Lucille Etched Silver C66 Sarah B.F. Silver F14* Diane Etched Silver C67 Julie B.F. Coral F15* Margot Etched Silver C68 Georgia B.F. Gilt F 16' Leta Etched Silver C69 Arlene Etched Silver F17' Leta Etched Black C70' Laura A.a.N. Silver F18 Feleda B.F. Gilt C71 Olivia Coral & Gilt F19 Felecia B.F. Silver C72' Doris A.O.N. Silver C73 Miriam Silver 21/0 SIZE C75 Olivia Etched Silver COOl Gladys Etched Silver C013' Teresa A.O.N. Silver C3' Virginia B.F. Silver C025' Doris A.R.N. Coral C7' Caroline B.F. Silver C034' Olga A.O.N. Silver C8 Fairmont B.F. Silver C035 Amy B.F. Silver C10 Nola B.F. Silver C040' Susan A.O.N. Silver C11 Glenwood B.F. Silver C051 Miriam B.F. Silver C12 Rondeau B.F. Silver C054 Arlene Etched Coral C I4 Cordelia B.F. Silver C056 Olivia Etched Silver C I5 Roberta B.F. Silver C065 Susan A.R.N. Coral CI6 Cynthia A.O.M. Silver C066' Olga A.R.N. Coral C17' Aldice B.F. Silver C067 Amy B.F. Coral C 18 Lucia. B.F. Silver K207' Elaine A.G.N.-D. Silver C19' Sonya B.F. Silver K220' Diana A.G.N. Silver C20' Martha B.F. Silver C21 Sandra D.F. Silver K234' Cora A.O.N. Silver C22 Sandra. B.F. Silver K235' Elva A.O.N. Silver C23 Sylvian RF. Silver K239' Verna A.G.N. Silver C24 Sylvian B.F. Silver K266' Vicki B A.G.N.-D. Silver C25 Vilma B.F. Silver K267' FL-32B A.G.D.-M. Silver *Sbowu on dial illutration page.
DETAILED DIAL DESCRIPTIONS Number Model Description Number Model Description 22/0 SIZE G34 Lady Lancaster B.F. & Dot Coral G35 Lady Lancaster B.F. & Dot Coral Gl' Lady Lancaster B.F. Silver G36 Lady Lancaster B.F. Coral G2' Lady Lancaster B.F. Silver G37' Venita B.F. Coral G3 Sheila-Rowenna RF. Silver G3S Daphne B.F. Silver G4' Luetts. A.C.N. Silver GD02* Clara A.G.N. & Dot Silver G5 Francine B.F. Silver GD03' Bernice A.G.N. & Dot Silver G6' Ellyn A.O.N. Silver GDOS Joanne A.G.N. & Dot Silver G7 Yvette-Veronica B.F. Silver GOO7 Jessica B.F. & Dot Gilt GS Fritzi B.F. Silver GOO9 Monica. A.O.N. Silver G9' Victoria A.O.N. Silver GOl4 Lucy A.a.N. Silver GIO' Della A.C.N. Silver GOIS' Emily A.G.N. & Dot Silver Gil Helena A.G.N. Silver GOl6 Louise A.G.N. & Dot Silver G12' Sylvia. A.C.N. Silver GOl7 Amelia. B.F. Gilt GI3 Elise A.C.N. Silver GOIS Monica Etched Black GI4 Grace A.O.N. Silver GOl9 Emily B.F. Silver GI5 Annette-Joyce A.a.N. Silver G020' Myrtle A.C.N. Silver Gl6 Nancy A.O.N. Silver G022 Camille A.G.N. Silver Gl7 Rosalie A.O.N. Silver G027 Venita B.F. Gilt GIS Nina A.C.N. Silver G042 First Lady B.F.-Gold Dol-Coral Gl9 Lorna A.O.N. Silver G043' Frances A.G.N. Silver G20 Sophie-Daphne A.G.N. Silver G058 Lady Lancaster Oxidized Num. Silver G2l Lady Hamilton B.F. Silver G059 Lady Lancaster B.F. Gilt G22 Lady Lancaster B.F. Silver G060 Lady Lancaster B.F. Silver G23 Lady Lancaster B.F. Silver G06l Lady Lancaster B.F. Silver G24 Lady Lancaster B F. Silver G063' Jessica. B.F. Coral G26 Lorna B.F. Coral G064 Clara. A.R.N. Coral G27 Luetta. B.F. Coral G074 Jessica. B.F. Silver G28 Lorna B.F. Coral G07S First Lady B.F. Coral G30 Linda B.F. & Dot Silver G076 First Lady Gold & Black Dots-Coral G3l Daphne E. F. Gilt Two Tone G077 First Lady Gold & Black Dots-Coral G32 Janet kg.n. Silver G07S First Lady Gold & Black Dots-Coral G33 Vivian B.F. Coral GOSS First Lady Gold Dot & Black Num.-Silver Sbown on dia1lliustration pages ALWAYS USE GENUINE HAMILTON MATERIAL 41
HAMILTON HOUR AND MINUTE HANDS Color 18 SIZE Illustrations of hands show both the exact size 0 0 8001 Blue and shape; color or finish of individual hands is 16 SIZE indicated by color after the catalog number. Hand 0 0 8011 Blue colors described as GILT are gold plated; those (j 0 8012 Blue described as RHODIUM are rhodium plated. 0 0 8020 Black Orders for hands not shown must be accompanied 12 SIZE by samples. If it is not possible to duplicate the e041 Blue sample hands, they will be matched as closely as 0 0 8042 Gilt possible from available stocks. {8047 Blue 0 0 8048 Gilt When only one hand of a set is needed experience 10 SIZE indicates that a complete new set be procured to Blue insure uniformity in color, style, and fit. {8055 0 0 8056 Gilt ALWAYS ORDER HANDS BY MATERIAL Blue NUMBER. 8058 Gilt 0 0 8059 Rhodium l' 8061 Black 0 0 8060 Black - Color Color Color o SIZE {8251 Blue 0-8230 Gilt 18/0 SIZE 0--- 0 8078 Black r3 Blue <>- 8354 Blue 6/0 SIZE 0-- 0--- 8232 Gilt 0-0--- 8355 Blue r102 Blue 8242. Rhodium {8356 Blue 0-- 0--- 8103 Gilt {8262 Gilt 0-0---- 0-- 0--- 8357 Gilt 8116 Rhodium 8261 Rhodium 0-0-- e 104 Blue -- {8235 Blue 8119 Gilt 0-- 8236 Gilt 0--- {8106 Blue a 0-- 8237 Blue 20/0--21/0--22/0 SIZE - 8107 Gilt Black 0---0 0-- 0--- 8111 Luminous 8260 Gilt! r386 Blue 0+- 8113 Luminous 0-0- 8240 "Blue 8387 Gilt {8122 Black 0-- 0--- 8241 Gilt 8406 Black 0--- 0 -- 8117 Gilt* r259 Black 0-0- {8373 Blue Black* 0-- 8263 Gilt 8374 Gilt 0--- 0---!"" 8118 Gilt' 8253 Rhodium r84 Blue 8120 Gilt {8223 Blue 0-0-- 8385 Gilt 0--- a 0-0--- 8121 Rhodium 8224 White 8392 Rhodium 0--- 0 8247 White 0-8413 Black 12/0 SIZE 8/0 SIZE GRADE 747 Black 0- Blue 8395 Rhodium 0-0-- {8201 0-- 0-- 8127 Luminous 8202 Gilt! 8408 Black 0-0-- 8205 Luminous 8/0 SIZE GRADE 748 8402 Gilt 14/0 SIZE 0-0 {8124 Gilt {8404 Black 0-- 8125 Black - 8401 Gilt 0- <>- 8254 Blue e>-- 0 8126 Luminous 0-- 8412 Gilt * Also used on 8/0 size Grade 747 ALWAYS USE GENUINE HAMILTON MATERIAL d
--0---- --- 0-0- 0-- --- -- - HAMILTON SECOND HANDS Color Color 18 SIZE 6/0 SIZE 8702 Blue 16 SIZE 8707 Blue 8712 Blue 8713 Black 12 SIZE Blue f"" 8732 Gilt 8737 Blue 8738 Gilt 10 SIZE r743 Blue 8744 Gi lt 8745 Rhodium l: Blue Gilt 8752 Rhodium 8753 Black o SIZE 8773 Blue 0--- r790 Blue 8791 Gilt 8800 Rhodium {8792 Blue* 8793 Gilt {8794 Blue 8795 Gilt r796 Blue 8797 Gilt. 8799 Rhodium 8798 Black 14/0 SIZE {8866 Blue 8867 White Black Long Pipe {8832 8872 Gilt Long Pipe 8878 Rhodium Long Pipe - 11+ Color 8875 Blue - f8881 Black 8887 Gilt l8883 Rhodium {8873 Blue 8830 Rhodium 8879 \Ybite 8/0 SIZE GRADE 747 9502 9501 { 9512 Black Gilt Rhodium 8/0 SIZE GRADE 748 9503 Black 9504 Gil t 9505.475 u Long-Black (with red tip) 9506.595 " Long-Black (with red tip) 9509 Gilt (with black tip) 9507 Gilt (with red lip) 9508 Black 'Also used on 12/ 0 size ALWAYS USE GENUINE HAMILTON MATERIAL 43
HAMILTON MATERIAL CABINETS HAMILTON MATERIAL CABINET Essential equipment for every watch repair shop is a Hamilton Genuine Cabinet. Ready accessibility of materials from a neatly organized cabinet saves time. And it makes it easier to maintain inventories of essential material. Each of the cabinet drawers holds labelled bottles containing an assortment of the most-needed materials for virtually all Hamilton civilian watches from 18 size to 22/ 0 size inclusive. A convenient reference chart for staffs and jewels is an integral part of the top drawer of t he cabinet. The case measures 137:1" x 10 7:1" x 3).1; inches. Available through Hamilton Wholesalers. HAMILTON GENUINE MAINSPRING ASSORTMENT A complete assortment of Hamil ton mainsprings is also essential to every watch repair shop. And a convenient way to maintain a supply of mainsprings is through the use of the Hamilton Mainspring Cabinet. Each cabinet contains four dozen steel springs for Hamilton watches 18 size to 22/ 0 size inclusive. Each spring is packed in an individual envelope on which is printed essential in formation on catalog number, size, and strength. The cabinet measures 6 ).1; x 2).1; x 2 %' and is complete with charts and index cards. Available through Hamilton Wholesalers. ALWAYS USE GENUINE HAMILTO N MATERIAL 44