EFR Empire Finish & Reclaim Cabinets Section C: Table of Contents Cabinet Models Options EFR- SRB EFR- SRC Parts Cabinet Assembly Reclaimer Dust Bag Dust Collector Pipe String Blast Gun Options Details Cabinet Dust Collector C C C C C C C C C C C EFR Cabinet Models MODEL PART DUST BLOWER SHIPPING DESCRIPTION NUMBER DOOR TYPE COLLECTION MOTOR WEIGHT EFR- SRB 00 Single Bag ½ hp lbs EFR- SRC 000 Single DCR-0 ½ hp lbs IMPORTANT! Be sure Volt, 0-0 Hertz, Single-Phase electrical source is available at the installation site. Machine must be wired for the customer s electric source. Never use silica sand in any Empire equipment. 0/ Page C www.empire-airblast.com..00
Options: EFR- SRB FACTORY CUSTOMER SEE INSTALLED INSTALLED PAGE Black curtain for cone 0 0 C Black curtains for front wall 0 0 C Black curtains for interior sides and back wall 0 0 C White curtain for cone 00 0 C White curtains for front wall 0 0 C White curtains for interior sides and back wall 0 0 C Window protector, plastic 0 0 C Window protector, screen 00 00 C Cabinet Extended-Wear Options Cabinet Options Antistatic strap 0 0 C Armrest assembly 0 0 C Door interlock safety switch 0 0 C Dust-off gun assembly 0 0 C Glove hole plugs 0 0 C Gun holder, fixed 000 000 C KLEEN package 0 0 C Left-side door 0 Nozzle, ¼ boron 00 00 Nozzle, ¼ Di-Carb 0 0 Safety matting (specify length) 000 000 C Turntable, manual, rolling, includes inside/outside tracks 0 0 C Turntable, manual, stationary 0 0 C 0/ Page C www.empire-airblast.com..00
Options: EFR- SRC FACTORY CUSTOMER SEE INSTALLED INSTALLED PAGE Cabinet Extended-Wear Options Black curtain for cone 0 0 C Black curtains for front wall 0 0 C Black curtains for interior sides and back wall 0 0 C White curtain for cone 00 0 C White curtains for front wall 0 0 C White curtains for interior sides and back wall 0 0 C Window protector, plastic 0 0 C Window protector, screen 00 00 C Cabinet Options Antistatic strap 0 0 C Armrest assembly 0 0 C Door interlock safety switch 0 0 C Dust-off gun assembly 0 0 C Glove hole plugs 0 0 C Gun holder, fixed 000 000 C KLEEN package 0 0 C Left-side door 0 Nozzle, ¼ boron 00 00 Nozzle, ¼ Di-Carb 0 0 Safety matting (specify length) 000 000 Turntable, manual, rolling, includes inside/outside tracks 0 0 C Turntable, manual, stationary 0 0 C Dust Collector Options for DCR-0 Bag shaker, automatic electric, volts 00 00 C Leg extension package for gallon drum 0 0 C Leg extension package for gallon drum 00/0 00/0 C Leg extension stand (only) for gallon drum 0 0 C Leg extension stand (only) for gallon drum 00 00 C Lid assembly and drum, gallon 0 0 C Lid assembly (only) for gallon drum 0 0 C Manometer, measures pressure differential 0 0 C Minihelic gauge, measures pressure differential 0 0 C / Page C www.empire-airblast.com..00
Parts: EFR Cabinet Assembly Guide to Part Numbers 0 0 EFR CABINET COMPONENTS Item Description Part # Pipe string, EFR (See page C.) 0 Glove ring flange, bolt on 0 Knob, - ( required) 0 Glove ring flange, twist on 0 * Blast hose, ID x section Blast hose, ID (Specify length.) 00 * Blast gun, MH- (See page C.) 000 Air hose, ½ ID (specify length) 0 Window kit (Incudes bulleted items below) 0 * Safety glass, x 00 * Gasket, window ( section) Gasket, / x / (Specify length.) Frame, window 0 Knob, / ( required) 0 Bolt, / x - / Spacer, window ( required) Foot treadle, EFR Valve, foot treadle Repair kit for foot treadle * Gloves, pair 0 Glove, left hand 0 * Gasket, door (. section, side door) Gasket, ¾ x ¾ (Specify length.) 0 Clamp, ( required) 0 Bolt, door, - x Nut, - (ESNA) Handle, door 0 Cover, handle 0 Item Description Part # Light box assembly (includes bulleted items below) Light fixture with gasket Floodlight, 0 Watt 0 * Gasket, light bulb 0 Switch, on/off, amp Line cord with plug 0 Inlet filter screen 0 Inlet filter ( required) 0 Reclaimer assembly with blower (See page C.) 0 Conveying hose, x Media regulator, SAR- (See page C.) 0 Grommet, air hose, ¾ x Grommet, blast hose, x ¾ 0 Hose clamp, (one each end) 0 NOT SHOWN Floor section ( required) 0 Door hinge, 0 Z-strip, reclaimer mount 0 Decal, INSTRUCTIONS/WARNINGS Decal, orange dot strip 0 Decal, Empire logo 0 Paint, touch-up kit * Recommended spare part Consumable wear item Failure to replace glass with Empire safety glass could result in serious injury. 0/ Page C www.empire-airblast.com..00
Parts: EFR Reclaimer, 00 CFM Guide to Part Numbers EFR Reclaimer Components Reclaimer assembly with blower 0 Reclaimer assembly without blower 0 Motor key, x ½ Motor, ½ HP, -0V/0-0Hz/ Phase Reclaimer top Fan blade, ¾ diameter x ID Tuning band (steel part only), solid Gasket, tuning band, solid Tuning band (steel part only), with slots 00 Gasket, tuning band, with slots Gasket, reclaimer door Door 0 Screen 0 Pipe nipple, 0 SAR- media regulator, complete, ¼ FPT 0 0a SAR- media regulator, body 0b Thumb screw, ¼ 0 x 0 0c Plug, clean out 0 0b 0c 0a 0 Parts: EFR Dust Bag Guide to Part Numbers Dust Bag Components Item Description PART NUMBER Clamp, adjustable 0 * Dust bag, inlet, 0 sq. ft. Closure clamp 0 Blower assembly (See above.) * Recommended spare part Consumable wear item * Recommended spare part Consumable wear item 0/ Page C www.empire-airblast.com..00
Parts: EFR Dust Collector, DCR-0 Guide to Part Numbers DCR-0, Part Number 00 DCR-0 COMPONENTS Item Description PART# Bolt, levelling, - x ( required) Latch and keeper (requires welding) 0 Hose with fittings, ¼ x, dust collector Bolt, - x ¼ ( required) Knob, - ( required) 0 Access door, dust collector 0 Gasket, access door, x ½, 0 section Gasket, x ½ (specify length) 0 Valve, push-button, NPT & #0 -, P Barbed fitting, ¼ tube x #0 -, per assembly 0 Adapter, ¼ tube x MPT, 0 (for air cylinder) 0 Tubing, ¼ OD ( required) 0 Air cylinder, standard collector and auto shaker 0 Air cylinder, auto-pneumatic bag shaker only Gasket, top plate, x ¼ ( required) Top plate 0 Bag-rack weldment 0 Rubber bumper ( required) * Dust bag, cotton sateen ( required) Decal, Empire logo (not shown) 0 Decal, orange dot strip (not shown) 0 Paint, oz. aerosol, beige (not shown) Decal, Instruction/Warning 0 Dust hose, x Hose clamp, 0 Adapter, ID x OD 0 Gasket, clean-out door, dust collector * Recommended spare part Consumable wear item 0 0 DCR-0 Options FACTORY CUSTOMER SEE INSTALLED INSTALLED PAGE Automatic bag shaker cleans bags thoroughly every time the system is turned off. Electric shaker for all bag-house collectors 00 00 C Pneumatic shaker for DCR-0 0 0 Call Leg extensions raise collector so larger collection drum can be placed underneath. Leg extension package for gallon drum 0 0 C Leg extension package for gallon drum 00/0 00/0 C Leg extension stand (only) for gallon drum 0 0 C Leg extension stand (only) for gallon drum 00 00 C Lid assembies for collection drums attach securely to clean-out door. Lid assembly and drum, gallon 0 0 C Lid assembly (only) for gallon drum 0 0 C Manometer, measures pressure differential 0 0 C Minihelic gauge, measures pressure differential 0 0 C 0/ Page C www.empire-airblast.com..00
Parts: EFR Pipe String EFR Pipe String Part Number 0 Guide to Part Numbers EFR Pipe String Components Item Description Part # Pipe string, EFR (Includes items through ) 0 Regulator,, without gauge 0 Diaphragm and O-ring kit for regulator 00 Bracket ( required) Filter, manual 0 * Element for filter (not shown) 00 O-ring and gasket kit for filter (not shown) 0 Pipe plug, ¼ 0 Reducing Tee Gauge, ¼ NPT 0 Connector, brass, x ½ 0 * Recommended spare part consumable wear item Parts: EFR Blast Gun MH- Gun with ¼ Ceramic Nozzle (P # 000, Standard) Item Description PART NUMBER * Gun body, MH- long handle * Nozzle, ¼ ceramic, air jet (standard) 0 * Air jet, (orange) 0 * Nozzle adapter, plastic 0 Spring, suction-gun assist Nut, hose clamp, MH- 00 O-ring ID x OD Screw set, ¼ 0 x 0 Connector, MH- 0 0 Hose barb, ½ FPT x ½ hose 00 O-ring, ½ ID x OD ( required) * Recommended spare part Consumable wear item 0 Nozzles for MH- Guns, ¼ PART NUMBER Ceramic (each) 0 Ceramic (0 pack) 0 Di-Carb (each) 0 Boron (each) 00 0/ Page C www.empire-airblast.com..00
Options Details: EFR Cabinets Cabinet Options FACTORY CUSTOMER INSTALLED INSTALLED Antistatic strap prevents static shock to the operator. 0 0 Armrest assembly reduces fatigue. 0 0 Door interlock safety switch shuts down blasting when swing doors are opened. (Switch assembly) 0 0 Valve Valve bracket Hose barb, ¼ NPT x ½ hose Plug, ¼ NPT Dust-off gun removes fines and debris from part surfaces. (Complete assembly) 0 0 Dust-off gun only 0 0 Hose assembly, dust-off gun Grommet, dust hose, ¼ - x Glove hole plugs seal cabinet for automated operation. 0 0 Gun holder, fixed, frees operator to manipulate work pieces within the blast stream. 000 000 KLEEN package prevents dust from dropping onto the floor when cabinet doors are opened and returns pressurized media to the cabinet in the event that a blast nozzle plugs. 0 0 Rubber curtains shield cabinet interior from harsh abrasives. Rubber nuts (Part # ) required. Black curtain for cone 0 0 Black curtains for front wall 0 0 Black curtains for interior sides and back wall 0 0 White curtain for cone 00 0 White curtains for front wall 0 0 White curtains for interior sides and back wall 0 0 Safety matting protects turntables, cabinet floors and workers. (Two-foot-wide safety matting, with 000 000 pockets to catch spilled media, is sold by the linear foot. Lengths required: feet around cabinet without turntable; around cabinet with rolling turntable; feet for interior cabinet floor. Specify total length required when ordering.) Turntables facilitate the processing of heavy parts. Table, Cart & Wheels Tracks & Platforms 0 turntable Seal ( required) 00 Bearing thrust 00 Bearing 0 Wheel-bearing seal, inner V-groove wheel 0 Wheel-bearing seal, outer 0 Outside cup 00 Cotter pin x ¼ (before ) 00 Hub insert 0 0 Cart & wheels assembly, EFR only 00 Inside track for EFR, door 0 Outside track for EFR 0 Manual turntable with dolly 0 FACTORY CUSTOMER INSTALLED INSTALLED Window protector, made of clear plastic, is recommended for use with light, less aggressive abrasives. 0 0 Window protector, consisting of a steel screen, protects against heavy and coarse media. 00 00 0/ Page C www.empire-airblast.com..00
Options Details: EFR Dust Collector DCR-0 Dust Collector Options FACTORY CUSTOMER INSTALLED INSTALLED Bag shaker, automatic electric, cleans bags thoroughly every time the system is turned off. 00 00 Bag shaker, automatic pneumatic Call factory Call factory Bag Shaker, Automatic Electric Components Pressure switch, differential 0 Timer 0 Flasher Solenoid valve, 0 VAC Cylinder (not included; standard with collector) Leg extension package for gallon drum includes stand, drum cover and gallon drum 0 0 Leg extension package for gallon drum includes stand and drum cover only 00/0 00/0 Leg extension stand (only) for gallon drum 0 0 Leg extension stand (only) for gallon drum 00 00 Lid assembly for gallon drum (includes drum) 0 0 Components for Gallon Lid Assembly with Drum Drum, gallon 00 Gasket for lid (' required) 00 Hose clamp, " 0 Adapter (if required) 0 Gum rubber tube, " ID x " long 0 Lid weldment 00- Lid assembly for gallon drum (does not include drum) 0 0 Components for Gallon Lid Assembly without Drum Lid weldment 0 Gasket for lid (' required) 00 Hose clamp, " 0 Adapter (if required) 0 Dust hose, " ID x ' long Manometer measures pressure differential 0 0 Minihelic Gauge measures pressure differential 0 0 0/ Page C www.empire-airblast.com..00