NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES... A 13 WALVOIL SECTIONAL VALVES...... A 17 WALVOIL PROPORTIONAL VALVES...... A 25 WALVOIL DIVERTER VALVES...... A 34 CABLE CONNECTION KITS...... A 42 JOYSTICK CABLE CONTROL...... A 43 OIL PILOT CONTROLS...... A 45 CONTROLLER HANDLES...... A 64 SOLENOID OPERATED VALVES ATOS SOLENOID VALVES...... A 67 MAXMA SOLENOID VALVES...... A 77 WALVOIL SERIES... FLOW... PAGE SDM080 Series... 25L/Min... A 2 SD4 Series... 45L/Min... A 3 SD5 Series... 45L/Min... A 4 SDM105 Series... 40L/Min... A 5 SD11 Series... 70L/Min... A 6 SDM140 Series... 80L/Min... A 7 SDM141Series... 80L/Min... A 8 SD14 Series... 120L/Min... A 9 SD18 Series... 150L/Min... A 10 MONOBLOCK SPOOLS...... A 11 NB: models, Codes and Specifications may be subject to change without notice.
SDM080 Series 1 to 4 sections for open and closed centre. Fitted with main pressure relief and load check. Available in parallel or tandem circuit. Optional carry-over port. 14mm Ø interchangeable spools. Available with Microswitch and remote cable control. Agricultural machinery, Truck Cranes, small overhead platforms. No. Spools Nom. Max. Press. P,A,B OPTIONS Max. Press. T DIM A (mm) L/Min BAR BAR P & T A & B SDM080/1/18/PSA 1 95 $POA SDM080/2/2X18/PSA 2 127 $POA SDM080/3/3X18/PSA 3 159 $POA SDM080/4/4X18/PSA 4 191 $POA SDM080/5/5X18/PSA 5 25 315 25 3/8 1/4 223 $POA SDM080/6/6X18/PSA 6 255 $POA The above s fitted with Cylinder Spools and Spring Centered. Type Code Description 1,2,3,4 Spool - Please refer to Page A11 No Extra 11 5V11102000 Detent 3 Position $POA AE 4TAP310007 Plug - High Pressure Carry Over $POA AEK 4TAP310007 Plug - High Pressure Carry Over (3/8 plug re.) $POA LCB 5CLO102000 Joystick - mechanical $POA Micro Switch (1st Spool) Micro Switch (Additional Spool) Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List A2 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
A41 SD4 Series Simple, compact design - single section for open and closed centre. Fitted with main pressure relief. 16mm Ø interchangeable spools. Available with remote cable control. Small tractors, log splitters, small dumpers, workshop press. Nominal Nominal Pressure L/MIN BAR P.A.B.T. SD4/1/18 45 250 1 / 2 $POA The above unit is fitted with a cylinder spool and spring centered. Type Code Description 1,2,3,4,6,7 Spool please refer to Page A11 No Extra 8 5V08105000 Spring Centre Kit $POA 11 5V11105000 DETENT KIT 3 POSITION $POA 12 5V12105000-10 DETENT KIT 2 POSITION (1,2) $POA 15 5V15105000 DETENT KIT 2 POSITION (0,1) $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A3
SD5 Series Simple, compact and heavy duty design - 1 to 7 sections for open and closed centre. Fitted with main pressure relief and load check. Available in parallel, series or tandem circuit. Optional carry-over port. 16mm Ø interchangeable spools. Available with solenoid and remote cable control. Harvesting machinery, brush cutters, front-loaders, truck cranes, dumpers. No. Spools Nom. Max. Pressure P,A,B Max. Pressure on T DIM A L/MIN BAR BAR SD5/1/18 1 100.5 $POA SD5/2/2X18 2 45 137.5 $POA SD5/3/3X18 3 174.5 $POA 315 25 3/8 SD5/4/4X18 4 40 211.5 $POA SD5/5/5X18 5 248.5 $POA SD5/6/6X18 6 35 285.5 $POA SD5/7/7X18 7 322.5 $POA The Above s With Cylinder Spools and Spring Centered Type Code Description 2,3,4,6,7 Spool - Please refer to Page A11 No Extra 8 5V08105000 Spring Centre Kit (Standard) $POA 11 5V11105000 Detent 3 Position $POA 15 5V15105000 Detent 2 Position 0 & 1 $POA 513 **SD5-513 4th Position Float $POA AE 3XGIU522460 Plug - High Pressure Carry Over $POA AEK 3XTAP522282 Plug - Closed Centre $POA AET 3XTAP623170 Plug - Open Centre (Standard) $POA PL 5V08105701 Pneumatic Control $POA LCB 5CLO205100 Joystick (on 2 spools) $POA 8IM 5IDR205021 Hydraulic Pilot - Proportional 5-15 BAR $POA ES3 5V08105930 Solenoid Control 12 Volt (2 sides) $POA ES3 5V08105960 Solenoid Control 24 Volt (2 sides) $POA MS 0462550 Micro Switch (Requires 8MS1/2/3)(1 Off required per Valve) $POA 8MS1/2/3 **SD5-8MS1/2/3 Micro Switch Striker KIT (1 Off required per Spool)(A/B/A&B) $POA 8MG1/2/3 5V08105660 Micro Switch - long life sealed unit(1 off req. per spool) $POA 2RL 5ROT/SD5 Rotary Spool Kit $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List A4 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
SDM105 Series These units are fitted with a pressure compensated flow regulator on the inlet port to provide fine tuning of the actuator speeds, it can also be fitted with a solenoid unloader valve which enables remote stop/start. No. Spools SDM105/1/M/18L/LT 1 Nom. Max.Pres. P,A,B Max. Press. on T Dim.A L/MIN BAR BAR P & T A&B mm 137.5 $POA SDM105/2/M/2X18L/LT 2 174.5 $POA SDM105/3/M/3X18L/LT 3 211.5 $POA 40 315 25 3/8 3/8 SDM105/4/M/4X18L/LT 4 248.5 $POA SDM105/5/M/5X18L/LT 5 286 $POA SDM105/6/M/6X18L/LT 6 323.5 $POA The above with cylinder spool, spring centered and without solenoid unloader. Type Code Description 1,2 SPOOL OPTIONS - Please refer to Page A11 NO EXTRA 11 5V11105000 DETENT KIT 3 POSITION $POA EL YCAR405305 UNLOADER, SOLENOID OPERATED 12 or 24 VDC $POA The above are add on s - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A5
SD11 Series Simple, compact and heavy duty design - 1 to 6 sections for open and closed centre. Available in parallel or series circuit. Optional carry over port. 20mm Ø interchangeable spools. Available with electro-hydraulic and remote cable control. Tilting vehicles, silage chopper-mixers, cranes. No. Spools Nom. Max. Pressure P,A,B Max. Pressure on T DIM L/MIN BAR BAR P,A,B T A SD11/1/18 1 129 $POA SD11/2/2X18 2 70 174 $POA SD11/3/3X18 3 315 25 1 / 2 3 219 $POA / 4 SD11/4/4X18 4 65 264 $POA SD11/5/5X18 5 309 $POA SD11/6/6X18 6 60 354 $POA Type Code Description 2,3,4,5,7 Spool - Please refer to Page A11 No Extra 11 5V11110000 Detent 3 Position $POA 15 5V15110000 Detent 2 Position 0 & 1 $POA 513 **SD11-513 4th Position Float $POA AE 3XGIU532470 Plug - High Pressure Carry Over $POA AEK 3XTAP532450 Plug - Closed Centre $POA PL 5V08110701-10 Pneumatic Control ON/OFF $POA 8PC 5V08111709 Pneumatic control Proportional $POA 8IM 5IDR210000 Hydraulic Pilot 5.8-22.4 BAR Range(max. Pilot =50 Bar) $POA LCB 5CLO211100 Joystick (on 2 spools) $POA 2RL 5ROT/SD11 Rotary Spool Kit $POA Cable Control -(Refer to page A 39) The above are add on s - Not necessarily spare parts List Power beyond Closed centre A6 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
SDM140 Series Fitted with direct or pilot operated main pressure relief. Independent load check per spool. Available in parallel circuit only. Optional carry-over port. 18mm Ø interchangeable spools. Available with manual, electro-hydraulic and remote cable control. Service. Agricultural machinery, harvesters, front-loaders, earth movers, dumpers, shovels and mobile cranes. Nominal Max. Press. P.A.B. Max Press on T No. of DIM A (mm) Spools L/MIN BAR BAR P.C.T. A. B. SDM140/1/18 1 135 $POA SDM140/2/2X18 2 180 $POA SDM140/3/3X18 3 225 $POA 80 315 25 3/4 1/2 SDM140/4/4X18 4 270 $POA SDM140/5/5X18 5 315 $POA SDM140/6/6X18 6 360 $POA The above with Cylinder Spool and Spring Centered. Type Code Description 1,2,3,4 Spool please refer to Page A11 No Extra 8 5V08110000-10 Spring Centre Kit $POA 11 5V11110000 DETENT KIT - 3 POSITION $POA 15 5V15110000 DETENT KIT 2 POSITION (0,1) $POA AE XGIU536695 G 3/4 carry--over sleeve $POA AEK XGIU532465 Plug for closed centre circuit $POA LCB 5CLO308100 Joystick lever for 2 sections $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A7
SDM141 Series Simple, compact and heavy duty design - 3 sections for open centre. Fitted with main pressure relief. Available with series circuit only. Optional carry-over port. A wide variety of service port valves. Available with manual, electro-hydraulic and remote cable control. 18mm Ø interchangeable spools. Skid-steer loaders. Nominal Nominal Pressure L/MIN BAR P.C.T. A. B. SDM141/3/3X18 80 250 3/4 1/2 $POA Type Code Description 1,5 Spool options please refer to Page A11 No Extra AE XGIU536695 G 3/4 carry--over sleeve $POA L 5LEV108000 Standard lever box $POA The above are add on s - Not necessarily spare parts List A8 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
SD14 Series Simple, compact design - single section for open and closed centre. Equipped with on/off electro-hydraulic control. Fitted with main pressure relief. 20mm Ø interchangeable spools. Available with manual, pneumatic, electro-hydraulic and remote cable control. Brush cutters, silage chopper-mixers, log splitters. Nominal Max. Press. P.A.B. Max. Press on T L/MIN BAR BAR P.A.B.T. SD14/1/18 120 250 25 3 / 4 $POA The above unit is fitted with a cylinder spool and spring centered. Type Code Description 1,2,3,4,6,7 Spool options please refer to Page A11 No Extra 8 5V08110000-10 Spring Centre Kit $POA 12 5V12110000 DETENT KIT 2 POSITION (1,2) $POA 11 5V11110000 DETENT KIT 3 POSITION $POA 15 5V15110000 DETENT KIT 2 POSITION (0,1) $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A9
SD18 Series Simple, compact and heavy duty design - 1 to 6 sections for open and closed centre. Fitted with direct or pilot operated main pressure relief. Available in parallel circuit only. Optional carry over port. 25mm Ø interchangeable spools. Available with manual and electro-hydraulic control. Control motors, large brush cutters, trash compactors and drain systems. No. Spools Nom. Max. Pressure P,A,B Max. Pressure on T DIM L/MIN BAR BAR P,A,B,C T A SD18/1/18 1 150 161 $POA SD18/2/2X18 2 350 25 3 / 4 1 212 $POA SD18/3/3X18 3 140 265 $POA Type Description 1,2,3,4,7 Spool - Please refer to Page A11 No Extra 11 5V11120000 Detent 3 Position $POA 15 5V15120000 Detent 2 Position 0 & 1 $POA AE 3XGIU541600 Plug - High Pressure Carry Over $POA AEK 3XTAP540560 Plug - Closed Centre $POA PL 5V08120701 Pneumatic Control on/off $POA 8IM 5IDR220000 Hydraulic Pilot - Proportional 6-26 Bar (50 Bar Max.) $POA Cable Control - Please refer to Page A41 The above are add on s - Not necessarily spare parts List A10 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
MONOBLOCK SPOOLS SDM080 SD4 SD5 SD14 SDM140 SD18 SPOOL 4th Pos Float VALVE SERIES SPOOL TYPE model LIST PRICE SD5 5 3CU1242100* $POA SD11 5 3CU1442100* $POA NB: This option requires a modified body. VALVE SERIES SD11 SPOOL TYPES 1 2 3 4 6 7 CYLINDER MOTOR SINGLE ACT- ING ON A SINGLE ACT- ING ON B ALL PORTS CLOSED P CLOSED A & B TO T SDM080 3CU1010130 3CU1025130 3CU1031130 3CU1035130 N/A N/A $POA SD4 1CP =3CU1110110 3CU1125130 3CU1131130 3CU1135100 3CU1150130 3CU1155130 $POA 1N = 3CU1110120 SD5 3CU1210130 3CU1225130 3CU1231130 3CU1235120 3CU1250130 3CU1255130 $POA SD11 3CU1410130 3CU1425130 3CU1431130 3CU1435130 3CU1450130 3CU1455130 $POA SDM140 3CU1310130 3CU1325401 3CU1331130 3CU1335130 N/A N/A $POA SD18 3CU1610130 3CU1625130 3CU1631100 3CU1635100 N/A N/A $POA NB: The above prices are spare part prices and are not additional to the valve price April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A11
A12 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004