+- ase Mounted lug Lead Unit ort Solenoid Valve Series VQZ// Single Unit [Option] How to Order Valve Made to Order (For details, refer to page 7.) VQZ Series VQZ body width mm VQZ body width mm VQZ body width 8 mm position single () () () () position closed center Type of actuation Note) 8 position pressure center position double port for mixture mounting (N.C.) (R)()(R) ()() (R)()(R) position exhaust center ()() ()() (R)()(R) (R)()(R) (R)()(R) ()() (R)()(R) Note) There is no position pressure center for the metal seal type of the VQZ series. () (R) () (R) () port for mixture mounting (N.O.) () ody type ase mounted M I compliant Nil W Note) Compliant Note) VQZ/ DIN terminal rubber seal only (except external pilot). For details on I enclosure, refer to page. Nil: Non-locking push type (Tool required) +- : Locking type (Tool required) ort size Symbol ort size VQZ VQZ VQZ Nil Without sub-plate Rc /8 Rc / Rc /8 Note) For inch sizes, refer to page. Electrical entry G: Grommet (DC specification) L: L-type plug connector with lead wire With light/surge voltage suppressor LO: L-type plug connector without connector With light/surge voltage suppressor M: M-type plug connector with lead wire With light/surge voltage suppressor CE compliant Nil Q CE marked Note) C-type models that are CE compliant have DIN terminals only. MO: M-type plug connector without connector With light/surge voltage suppressor Seal type Function Symbol Specifications DC C Nil Standard (. W) High speed response type (. W) Note ) K Note ) High pressure type ( type only) (. W) R Note, ) External pilot type R Note, ) High speed response/external (. W) pilot type KR Note, ) High pressure/external pilot type ( type only) (. W) Note ) Note ) Option Note ) For details on external pilot type, refer to page. Note ) For C specification power consumption, refer to page. Caution Use standard (DC) specification for continuous duty. + +- Note ) Note ) Note Y: DIN ) YO: DIN YZ: DIN YOS: DIN Note ) Note ) YS: DIN terminal terminal terminal terminal without connector (DC speci- terminal without connector (DC specificationfication) Coil voltage VDC With light/surge voltage suppressor Note ) pplicable to the VQZ/ for DIN terminal type. For C voltage valves there is no S option. It is already built-in to the rectifier circuit. Note ) Standard lead wire length: mm With surge voltage suppressor VDC With surge voltage suppressor VC (/ Hz) VC (/ Hz) VC [ VC] (/ Hz) VC [ VC] (/ Hz) VDC VDC Note) For sub-plate part no., refer to page 7. Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Options High speed response type High pressure type ( type only) External pilot type For details on external pilot type, refer to page. Symbol X X X Series VQZ Made to Order (For details, refer to page 7.) Description ilot valve common exhaust Main valve fluoro-rubber ll fluoro-rubber Flow Characteristics position position position Configuration VQZ Closed center position Exhaust center ressure center position Single Double Closed center Exhaust center ressure center Single Double Single Double VQZ Closed center position Exhaust center ressure center Model Specifications Type Fluid Max. operating pressure (Ma) Min. operating position pressure (Ma) position mbient and fluid temperature ( C) Max. operating frequency (Hz) ilot exhaust method Lubrication VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ VQZ Single Double position single, double position Mounting orientation Impact/Vibration resistance (m/s ) Note ) Enclosure ased on IEC Note ) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and Hz. Test was performed to axis and right angle directions of the main valve and armature when pilot signal is ON and OFF. (Value in the initial state) Note ) When I compliant DIN terminals are selected: VQZ - Y W- - Solenoid Specifications Electrical entry Coil rated voltage DC (V) C / Hz llowable voltage fluctuation ower consumption (W) pparent power (V) Surge voltage suppressor Indicator light Flow characteristics / ( /) / / (/ E/E) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv.7..7............7..7.8..........................7..7............7.7..7...7..7................8.8.8.8...7..7..7..7........7....7.....8...........8...8......8....8...........7..7...7.7..7...........7..7...7.7...7. W 7 or less 7 or less or less or less or less or less or less or less or less 8 or less or less or less or less 8 or less or less 8 or less or less 8 or less or less or less or less or less or less or less or less or less or less or less or less Note ) ased on JIS 87-8 (Supply pressure:. Ma; with light/surge voltage suppressor: clean air) Response time values will change depending on pressure and air quality. The values at the time of ON are given for double types. Note ) Weight without sub-plate DC C Standard High speed response, high pressure V V [V] V V [V] ir, Inert gas.7 (High pressure type:.).7.. VQZ, position only... to (No freezing) Non-locking push type, Locking type (Tool required) Individual exhaust Not required Free Single: Free Double, position: Main valve must be horizontal. / Dustproof (DIN terminal: I Note ) ) Grommet (G) L-type plug connector (L) In common between VC and VC, and between VC and VC. For VC and VC, the allowable voltage is % to +% of rated voltage. or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less 7 or less or less or less or less or less or less or less or less or less or less M-type plug connector (M) DIN terminal (Y) G, L, M Y,,,, ±% of rated voltage. [(With light:. (DIN terminal with light:.)]. [(With light:. (DIN terminal with light:.)].78 (With light:.8).8 (With light:.8) [. (With light:.7)].8 (With light:.). (With light:.) [. (With light:.)].78 (With light:.87).8 (With light:.87) [. (With light:.7)]. (With light:.).7 (With light:.) [. (With light:.)] Varistor LED (Neon light when C with DIN terminal) Response time (ms) Note ) High pressure:. W or less or less or less or less 8 or less or less or less or less or less or less or less or less or less or less Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com Standard: High speed response:. W C or less or less or less or less or less 7 or less or less 7 or less 7 or less or less or less or less or less or less 7 or less or less 7 or less or less 7 or less or less 7 or less or less or less or less or less or less or less or less or less Note ) Mass (g) 7 8 87 SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7
Series VQZ// Construction: VQZ// type type position single () () position single () () (R) () (R) (R) () (R) position double () () position double () () (R) () (R) (R) () (R) position closed center () () position exhaust center () () position pressure center () () position closed center () () position exhaust center () () position pressure center () () (R) () (R) (R) () (R) (R) () (R) (R) () (R) (R) () (R) (R) () (R) Note) Except metal seal type of the VQZ. Component arts No. Description ody Spool, Sleeve Spool valve iston ilot valve assembly Material luminum die-casted Stainless steel luminum/hnr Resin Note) For How to Order ilot Valve ssembly, refer to page 7. Note Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Dimensions: VQZ osition Single/ ort for Mixture Mounting Grommet (G): VQZ 8 (R)- G -. /8 [(), () port] SJ SY.8.. X pprox. M x.8 (External pilot port) <External pilot only> L-type plug connector (L): VQZ 8 (R)- L - 7. E port 8.8 ().8 () R... R 7. x ø.. /8 [(), (R), (R) port]. Y. M x.8 (Not used) M-type plug connector (M): VQZ 8 (R)- M - SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7 pprox..8 [7] ().8 () pprox. 7. [8.8] () 7. [.] R R 8. [.] R R 78. [8.8] ().8 () 8.8 [7] () [ ]: C [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
Series VQZ// Dimensions: VQZ osition Double Grommet (G): VQZ (R)- G -. /8 [(), () port] pprox.. x ø...8. X 7. x E port R R Y.. M x.8 (External pilot port) <External pilot only>.. 7. /8 [(), (R), (R) port]. M x.8 (Not used) L-type plug connector (L): VQZ (R)- L - M-type plug connector (M): VQZ (R)- M - pprox.. [.] pprox.. [] 8. 7. [.] R R 8. [.] R R [ ]: C [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Dimensions: VQZ osition Closed Center/Exhaust Center/ressure Center (Except metal seal type) Grommet (G): VQZ (R)- G -. /8 [(), () port].8. SJ SY X pprox.. M x.8 (External pilot port) <External pilot only> x E port L-type plug connector (L): VQZ (R)- L - R.... R. x ø.. 7. 7. /8 [(), (R), (R) port]. Y. M x.8 (Not used) M-type plug connector (M): VQZ (R)- M - SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7 pprox..8 [8.]. [7.] pprox.. [8.].8. [7.]. 7. [.] R R 8. [.] R R [ ]: C [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com 7
Series VQZ// Dimensions: VQZ osition Single/ ort for Mixture Mounting Grommet (G): VQZ 8 (R)- G - 8 /8, / [(), () port] pprox. 8.7 8 x ø. R R.. X.8 E port Y. M x.8 (External pilot port) <External pilot only> 8 8 8 /8, / [(), (R), (R) port]. M x.8 (Not used) L-type plug connector (L): VQZ 8 (R)- L - DIN terminal (Y): VQZ 8 (R)- Y - pprox.. [.7].8 [.8] Max.. pplicable cable O.D. ø. to ø7 g7 [ ]: C M-type plug connector (M): VQZ 8 (R)- M - pprox. 8.7 [8.] 78.7 8. 7.. 8..8. [8.] 8 [ ]: C [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Dimensions: VQZ osition Double Grommet (G): VQZ (R)- G - 8 /8, / [(), () port].. X pprox..8 M x.8 (External pilot port) <External pilot only> x E port L-type plug connector (L): VQZ (R)- L - pprox..8 [.8] 8 7. 8 R R 8 8 Max. pplicable cable O.D. ø. to ø7 x ø. /8, / [(), (R), (R) port] g7. Y.8 M x.8 (Not used) pprox. 7. [.8] 7. 8. 7.. 8... [8.] 7 [.] [ ]: C DIN terminal (Y): VQZ (R)- Y - SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7 M-type plug connector (M): VQZ (R)- M - [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
Series VQZ// Dimensions: VQZ osition Closed Center/Exhaust Center/ressure Center Grommet (G): VQZ (R)- G - 8 /8, / [(), () port] x E port.8 Y 8 8 8 /8, / [(), (R), (R) port]. M x.8 (Not used) Max..8 pplicable cable O.D. ø. to ø7 g7 8. pprox.. [.8] 7.7 8.7 [.].7 8. 7.. 8... [8.] 8 x ø. pprox. R R... 8.7. X. M x.8 (External pilot port) <External pilot only> L-type plug connector (L): VQZ (R)- L - DIN terminal (Y): VQZ (R)- Y - pprox. [.] 8. [.7].8 [.8] [ ]: C M-type plug connector (M): VQZ (R)- M - [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Dimensions: VQZ osition Single/ ort for Mixture Mounting Grommet (G): VQZ 8 (R)- G - (8) /, /8 [(), () port]. pprox. 7 []. Max. pplicable cable O.D. ø. to ø7 g7. 7. [7.]. 8. 78.8 7. 8..8 8. [7.]. ( ): VQZ - G - X pprox. [7.] 7 M x.8 (External pilot port) <External pilot only> E port L-type plug connector (L): VQZ 8 (R)- L - [ ]: C M-type plug connector (M): VQZ 8 (R)- M - R. 7 R (8) (8). x ø..... /, /8 [(), (R), (R) port] Y DIN terminal (Y): VQZ 8 (R)- Y -. M x.8 (Not used) SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7 pprox. [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
Series VQZ// Dimensions: VQZ osition Double Grommet (G): VQZ (R)- G - (8) /, /8 [(), () port].. 7. pprox. 7. x ø. R R 7.8 X x E port.. Y. M x.8 (External pilot port) <External pilot only> (8) (8). /, /8 [(), (R), (R) port] M x.8 (Not used) ( ): VQZ - G - L-type plug connector (L): VQZ (R)- L - DIN terminal (Y): VQZ (R)- Y - pprox..8 [.] 7 [] Max.. [ ]: C pplicable cable O.D. ø. to ø7 g7 7.8 M-type plug connector (M): VQZ (R)- M - 8. [7.] pprox. 7. [.] 7. 8. 78.8 7. 8.. [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Dimensions: VQZ osition Closed Center/Exhaust Center/ressure Center Grommet (G): VQZ (R)- G - (8) /, /8 [(), () port]... X pprox. M x.8 (External pilot port) <External pilot only> x E port L-type plug connector (L): VQZ (R)- L - pprox. 7 []. [.7] 8. [.] [ ]: C R R....7 (8) (8) Max. pplicable cable O.D. ø. to ø7 x ø.... 7 /, /8 [(), (R), (R) port] DIN terminal (Y): VQZ (R)- Y - g7.. Y. M x.8 (Not used) ( ): VQZ - G -..8 SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7 M-type plug connector (M): VQZ (R)- M -.7 [.] 8. [7.] pprox. 8.. [.]. 8. 78.8 7. 8. 7. [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted lug Lead Unit ort Solenoid Valve Series VQZ// Manifold Connector Kit [Option] How to Order Manifold Made to Order (For details, refer to page 7.) Note) 8 Symbol C C C C8 C M CM Note ) Note) There is no position pressure center for the metal seal type of the VQZ series. VVQZ 8 C C N Series VQZ VQZ VQZ Stations stations Manifold type ase mounted stations ort size [(), () port] ort size VQZ VQZ VQZ ø. one-touch fitting ø one-touch fitting ø one-touch fitting ø8 one-touch fitting ø one-touch fitting M thread Rc /8 Rc / Mixture of port sizes Note ) Specify port mixture/with port plug by the manifold specification sheet. ort mixture and port plug are available only for one-touch fitting type. Note ) For inch size one-touch fittings, refer to page. Kit type C Connector How to Order Valve Option Nil D D Note ) VQZ M Series VQZ body width mm VQZ body width mm VQZ body width 8 mm Type of actuation position single position double position closed center position exhaust center position pressure center port for mixture mounting N.C. port for mixture mounting N.O. Caution ody type Mase mounted Seal type Function Symbol Specifications DC C Nil Standard High speed response type (. W) (. W) Note ) K Note ) High pressure type ( type only) (. W) R Note, ) External pilot type R Note, ) High speed response/ (. W) External pilot type KR Note, ) High pressure/external pilot type ( type only) (. W) Note ) Note ) Option Note ) For details on external pilot type, refer to page. Note ) For C specification power consumption, refer to page. Use standard (DC) specification for continuous duty. N R Note ) CE compliant Nil Q CE marked None DIN rail mounting (With standard DIN rail length) DIN rail mounting (Without DIN rail) Name plate (Except VQZ) External pilot type Note ) Order DIN rail separately. For DIN rail part no., refer to page. Note ) For details on options and external pilot type, refer to page. Note ) When two or more symbols are specified, indicate them alphabetically. Nil Non-locking push type (Tool required) Locking type (Tool required) Electrical entry Coil voltage VC (/ Hz) VC (/ Hz) VC [ VC] (/ Hz) VC [ VC] (/ Hz) VDC VDC CE compliant Nil Q CE marked Note) C-type models that are CE compliant have DIN terminals only. Light/surge Symbol Electrical entry voltage suppressor G Grommet (DC specification) None L L-type plug connector with lead wire LO L-type plug connector without connector Yes M M-type plug connector with lead wire MO M-type plug connector without connector None YZ Note ) DIN terminal Yes YS Note ) DIN terminal (DC specification) Yes YOS Note ) DIN terminal without connector (DC specification) (Without light) Note ) pplicable to the VQZ/. For C voltage valves there is no S option. It is already built-in to the rectifier circuit. Note ) Standard lead wire length: mm Y Note ) DIN terminal YO Note ) DIN terminal without connector I compliant Nil W Note) Compliant Note) VQZ/ DIN terminal rubber seal only (except external pilot). For details on I enclosure, refer to page. Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Manifold Specifications Series ase model iping direction iping specifications ort size (), /(R) (), () pplicable solenoid valve pplicable stations Note) Manifold base mass (g) Example D side U side Stations VQZ-L VQZ-L VQZ-L VQZ VQZ VQZ - + - + VVQZ- VVQZ- VVQZ- Note) Weight without sub-plate. How to Order Manifold ssembly (Example) Side Side Side VVQZ-CC VVQZ-- VQZ-L VQZ-L VQZ-L Rc/8 Rc/ () port Rc /8 /(R) port Rc / C (for ø.) C (for ø) C (for ø) M (M thread) C (for ø) C (for ø) C8 (for ø8) Rc /8 C (for ø) C8 (for ø8) C (for ø) Rc / VQZ VQZ VQZ VQZ VQZ VQZ to stations to stations to stations set (C kit -station manifold base part no.) set (lanking plate assembly part no.) set (Single type part no.) sets (Double type part no.) set ( position type part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Enter in order starting from the first station on the D side. stations: ddition per station: 7 stations: ddition per station: stations: 8 ddition per station: dd the valve and option part number under the manifold base part number. When entry of part numbers becomes complicated, indicate by the manifold specification sheet. SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7 VVQZ-- C: One-touch fitting for ø Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
pprox. L L.7. E port. 8... 7.. X Series VQZ// Dimensions: VQZ VVQZ- Stations ort size C Grommet (G) D side (itch) =. U side (DIN rail clamp thread) (DIN rail). R R R R (8) (.) (.) ()... (.).8 C:. N7: 7.7 x ø. L L (Rail mounting hole pitch:.) L () (.) /8 [(), (R), (R) port] 8. (). (7.)... (Station ). (Station n) (itch) =. M x.8 [(), () port] One-touch fitting [(), () port] pplicable tubing O.D.: ø., ø/8" ø, ø/" ø, ø/". [8.]. [].7 [.] 8..8 R R M x.8 (External pilot port)...8 7... (itch) =. External pilot M The dashed lines indicate the DIN rail mounting [-D]. L-type plug connector (L) M-type plug connector (M) pprox..7 [.7] pprox. 7 [7]. [.] The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Gormmet (G). [ ]: C.8 [8.]. [.]. [.]. [8.]. [] The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). [ ]: C Dimensions L n L L L L L 7. 8. 7.. 8. 7 8. 8 87..... 7.. 8. 7. 7. 8 8.. 7. 8 7. 8... Formula: L =.n +. L =.n + 7. n: Stations (Max. stations) 7 8 7 8. 8. 8.. 8 8.. 7 7 87.. 7. 7... 7 8.. 7 7. 7 8.... 7 77. 88 8.. Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
pprox. X [.] 7 [.] ase Mounted Series VQZ// Dimensions: VQZ VVQZ- Grommet (G) Stations ort size.8 [7.8] pprox. (Lead wire length) L-type plug connector (L) C.. 7.8...7 ().7 (.8) (7.).7.7 [.] D side L 7.7 7.7.. 8 R R 7 L (itch) = (itch) = /8 [(), () port] (itch) = pprox.. [.8] 7. [.8] x ø. L L () (Rail mounting hole pitch:.) L (Station ) /8 R R U side (8) (Station n) (DIN rail clamp thread) (.) 7. [7.] (DIN rail) () M-type plug connector (M) 7. One-touch fitting [(), () port] pplicable tubing O.D.: ø, ø/" ø, ø/" ø8, ø/". [.]. [.8] 7. [.8] pplicable cable O.D. ø. to ø7 Max. 8. [.] DIN terminal (Y).8.8 8..8.. 8... 7 R R External pilot E port / [(), (R), (R) port]..8 (7.8).8 8. 8. 7. g7 (.). M x.8 (External pilot port) 7.. The dashed lines indicate the DIN rail mounting [-D]... SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7 The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). [ ]: C Dimensions L n L L L L L 8. 7 7 8 87. 8 8. 8. 7. 8 8 7. 7 7.. The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). [ ]: C 8 8. 7 8 8 8 87. 7. 8. 7. 8 The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). Formula: L = n + L = n + n: Stations (Max. stations) 7 8 8. 8. 8. 8. 7 7. 7 87.. 7.. 8 7 8 8. 7.. 8.. 8 8 8 Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com 7
pprox. (Lead wire length).7. 8... L L (Rail mounting hole pitch:.) L (8) L L (itch) = R (.) () () R Series VQZ// Dimensions: VQZ VVQZ- Grommet (G) Stations ort size C D side R R U side (DIN rail clamp thread) (DIN rail) 7. x ø. 7.. 7.. E port M x.8 (X: External pilot port) (For external pilot) /8 [() port] () 7 (.). / [(R), (R) port] 8.. (Station ) (Station n) One-touch fitting [(), () port] pplicable tubing O.D.: ø, ø/" ø8, ø/" ø, ø/8" (.8) (7.). (itch) = / [(), () port] 8... 7. (itch) = / The dashed lines indicate the DIN rail mounting [-D]. L-type plug connector (L). [.7] pprox..8 [.] 7. [78.] 7. [7.] M-type plug connector (M) pprox..7 [.] 7. [.] 8.8 [8.8] 8. [.] DIN terminal (Y) pplicable cable O.D. ø. to ø7 Max... 7.8.8. 8 g7 7.7. 7. Dimensions L n L L L L L. 7... 7 8 The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). [ ]: C 8 7. 8 7.. 8. 7 7 7. 7. The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). [ ]: C 8.. 7 8 7. 8 7.. 8. 7 7 The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). Formula: L = n + L = n + n: Stations (Max. stations) 7 8. 8 7 8.. 8 7. 7.. 7. 7.. 7 7.. 8. 7.. 8. 7 7 Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Manifold Options lanking plate assembly VVQZ-- (for VQZ) VVQZ-- (for VQZ) VVQZ-- (for VQZ) It is used by attaching on the manifold block for being prepared for removing a valve for maintenance reasons or planning to mount a spare valve, etc. SJ SY Restrictor spacer (pplicable to VQZ) VVQZ-- Mount a restrictor spacer between manifold base and valve, and thus making it possible to control cylinder speed by meter-out. 7 SV SYJ SZ V. S7 VQ Individual SU spacer VVQZ---M (-Q) (for VQZ) VVQZ--- (-Q) (for VQZ) VVQZ--- (-Q) (for VQZ) Supply port can be installed individually by mounting an individual supply spacer onto the manifold block. It s used for such cases that the different pressure should be supplied into each valve, etc. Individual EXH spacer VVQZ-R--M (-Q) (for VQZ) VVQZ-R-- (-Q) (for VQZ) VVQZ-R-- (-Q) (for VQZ) D C M:VQZ Rc/8:VQZ Rc/:VQZ Dimensions Model VQZ VQZ VQZ Note) Grommet M:VQZ Rc/8:VQZ Rc/:VQZ C D Note) 7 8 VQ VQ VQC VQZ SQ VFS VFR VQ7 Exhaust port can be installed individually by mounting an individual exhaust spacer on to the manifold block. It s used for such cases that the valve exhaust is likely to affect other stations due to circuit, etc. D C Dimensions Model VQZ VQZ VQZ Note) Grommet C D Note) 7 8 ort plug VVQZ-C (for VQZ) VVQZ-C (for VQZ) VVQZ-C (for VQZ) Used to block a cylinder port when changing port valves into port valves, etc. Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
Series VQZ// Manifold Options Name plate [-N] (pplicable to VQZ/) VVQZ-N- Stations (for VQZ) VVQZ-N- Stations (for VQZ) It is a transparent resin plate for placing a label that indicates solenoid valve function, etc. Insert it into the groove on the side of the end plate and bend it as shown in the figure. To order a manifold with nameplate already attached, insert N at the end of the manifold number. - + - + clips are attached for name plate mounting. DIN rail XT-DR- s for, enter the number from the DIN rail dimensions table. For L dimension, refer to the dimensions of each kit. Each manifold can be mounted on a DIN rail. Order it by indicating an option symbol for DIN rail mounting, -D. The DIN rail is approximately mm longer than the length of manifold. L Dimension No. L dimension No. L dimension 7. 8. 8 8.. L 7 8.. 7 8 7 8 8. 8. 7. 8. 8 8 () ().. 7 7. 8.. 8 8.. L =.n +. 7 7 7 8. 8 8. 8 8.. lanking plug KQ- KQ- KQ- KQ-8 KQ- L ød Dimensions pplicable fitting size ød. 8 Model KQ- KQ- KQ- KQ-8 KQ- L D 8.. (mm). 8 Silencer (for manifold EXH port) Silencer is installed in the manifold EXH port. 8 ø ø N- N- Model Silencer part no. VQZ N- VQZ N- VQZ N- Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Manifold Options erfect block (Separated): For VQZ VQ-FG- It is used on the outlet side piping to keep the cylinder in the intermediate position for a long time. Combining the perfect block with a built-in pilot type perfect valve and a position exhaust center solenoid valve will enable the cylinder to stop in the middle or maintain its position for a long time. The combination of a position single or double solenoid with a perfect block will prevent the cylinder from dropping at stroke end when residual supply pressure is released. Specifications Maximum operating pressure Minimum operating pressure mbient and fluid temperature Flow characteristics: C Max. operating frequency Dimensions Single unit M mounting hole. (). M. mounting hole. 8. 8 (). How to Order erfect block 8 () (.) ().. () Residual pressure release (7.) (.). VQ-FG- C M - F.8 Ma. Ma to C. dm /(s bar) 8 c.p.m n x one-touch fitting assembly (, port) pplicable tubing O.D.: ø, ø. 7.7 n x M x.8 n x one-touch fitting assembly (, port) pplicable tubing O.D.: ø., ø, ø Dimensions L n L L L n L L L L. 87. 8. 7 7 87. 8 7 8. 8. IN side port size OUT side port size C C ø one-touch fitting ø one-touch fitting M C M thread ø. one-touch fitting C ø one-touch fitting C ø one-touch fitting Manifold (DIN rail mounting style) VVQ-FG- Order DIN rail Stations mounting style [-D] station for perfect block. stations <Ordering Example> VVQ-FG- stations of manifold VQ-FG-CM-D, sets erfect block VQ-FG-CM-D, sets Note) ased on JIS 87-8 (Supply pressure:. Ma) 87. 8. 7. 7 7. 8. Manifold 8 8 7. 8 7 7.. 8 8.. SMC 7. 8. 7 SMC. 7 8.. 7 7 87. 8 Formula L = n + n: Station (Maximum stations) Option Nil None DIN rail mounting D (For manifold) F With bracket N Name plate 7 8. 8. NI NI Residual pressure release OUT OUT. <Check valve operating principle> L L L To CYL port = D side Stations n n x M x.8 n x one-touch fitting assembly (, port) pplicable tubing O.D.: ø., ø, ø (R) () (R) Note) When two or more symbols are specified, indicate them alphabetically. Example) -DN Caution Since air leakage from the pipe between the valve and cylinder or the fittings will prevent the cylinder from stopping for a long time. Check for air leakage using neutral household detergent, such as dish washing soap. lso check the cylinder s tube gasket, piston packing and rod packing for air leakage. Since one-touch fittings allow slight air leakage, screw piping (with M thread) is recommended when stopping the cylinder in the middle for a long time. Combining perfect block with position closed center or pressure center solenoid valve will not work. M fitting assembly is attached, without being incorporated in the perfect block. fter screwing in the fittings, mount the assembly on the perfect block. (Tightening torque:.8 to. N m) If exhaust side of perfect block is narrowed down too much, intermediate stopping accuracy will be decreased. Cylinder side pressure () 8 7.. 8. DIN rail clamp thread U side SU side pressure () n x one-touch fitting assembly (, port) pplicable tubing O.D.: ø, ø.7 7... <Example> position position/exhaust center Drop prevention () () (R) (R) () () (R) (R) Intermediate stop (R) () (R) () () <racket assembly> art no. Tightening torque Note) VQ-. to. N m FG-F Note) It is the tightening torque for mounting a bracket for the perfect block. Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7
+ + IN IN Series VQZ// Manifold Options erfect block (Separated): For VQZ/ VQ-FG- - It is used on the outlet side piping to keep the cylinder in the intermediate position for a long time. Combining the perfect block with a built-in pilot type perfect valve and a position exhaust center solenoid valve will enable the cylinder to stop in the middle or maintain its position for a long time. The combination of a position single or double solenoid with a perfect block will prevent the cylinder from dropping at stroke end when residual supply pressure is released. Specifications Maximum operating pressure Minimum operating pressure mbient and fluid temperature Flow characteristics: C Max. operating frequency Dimensions 7 VQ-FG- - F Manifold (DIN rail mounting style) VVQ-FG- Order DIN rail mounting style [-D] for perfect block. Single unit. 8 (.) 8. How to Order erfect block 7. (.) 7. x M mounting hole. x M mounting hole. (). () Residual pressure release 7. 7. (.) IN side port size Rc /8 Rc / C ø one-touch fitting C8 ø8 one-touch fitting IN () (.) Stations station.8 Ma. Ma to C. dm /(s bar) 8 c.p.m x Rc /8, / x one-touch fitting assembly (, port) pplicable tubing O.D.: ø, ø8.. 8 (.) (For C, C8) (.) (For C, C8) x Rc /8, / x one-touch fitting assembly (, port) pplicable tubing O.D.: ø, ø8 Dimensions L L L L OUT side port size Rc /8 Rc / C ø one-touch fitting C8 ø8 one-touch fitting stations <Ordering Example> VVQ-FG- stations of manifold VQ-FG-CC-D, sets VQ-FG-C8C8-D, sets erfect block Manifold n 8 7 78 8 88 7 87.. 7.. 7. 87.. 7. 8. 8 8 7 8.... 7 8 8 Caution SMC SMC Note) ased on JIS 87-8 (Supply pressure:. Ma) Option Nil None F With bracket DIN rail mounting D (For manifold) N Name plate - - + DIN rail clamp thread -. 7 7 8. <Check valve operating principle> L L L = To CYL port Residual pressure release D side Stations n x Rc /8, / x one-touch fitting assembly (, port) pplicable tubing O.D.: ø, ø8 Note) When two or more symbols are specified, indicate them alphabetically. Example) -DN Formula L = n + n: Station Since air leakage from the pipe between the valve and cylinder or the fittings will prevent the cylinder from stopping for a long time. Check for air leakage using neutral household detergent, such as dish washing soap. lso check the cylinder s tube gasket, piston packing and rod packing for air leakage. Since one-touch fittings allow slight air leakage, screw piping is recommended when stopping the cylinder in the middle for a long time. Combining perfect block with position closed center or pressure center solenoid valve will not work. When screwing the fittings in the perfect block, proper tightening torque for screws is as shown at the right. Set the cylinder load so that the cylinder Connection thread Rc /8 Rc / (R) () (R) IN IN roper tightening torque (N m) 7 to to pressure will be within two times that of the supply pressure. If exhaust side of perfect block is narrowed down too much, intermediate stopping accuracy will be decreased. 7. IN. 7. 7. Cylinder side pressure () (.) 8 (For C, C8). SU side pressure () x Rc /8, / x one-touch fitting assembly (, port) pplicable tubing O.D.: ø, ø8 U side (.) (For C, C8) <Example> position position/exhaust center Drop prevention (R) (R) () () (R) (R) Intermediate stop (R) () (R) () () () () <racket assembly> art no. Tightening torque Note) VQ-.8 to. N m FG-F Note) It is the tightening torque for mounting a bracket for the perfect block. Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Compact ody Type with Restrictor: For VQZ Restrictors are built into the valve body, making it easier to adjust cylinder speed. Needle valve is equipped with a retainer to prevent accidental needle loss. Symbol (Single) Manifold art No. VVQZC Valve art No. Flow Characteristics Flow rate (l/min (NR)) 7 8 Fully open Number of needle rotations (turns).7ma.ma.ma.ma Note ) Valve with restrictors is available on rubber seal models only. Note ) Since the body (of this type) is made compact, there is no interchangeability with the standard VQZ. Note ) Tightening torque of needle valve lock nut should not exceed. N m. Series VQZ Compact body Stations Manifold type stations ase mounted stations C C Specifications Single Double Closed center Exhaust center Metal (Without restrictor) (Without restrictor) (With restrictor) Metal (Without restrictor) (Without restrictor) (With restrictor) Metal (Without restrictor) (Without restrictor) (With restrictor) Metal (Without restrictor) (Without restrictor) (With restrictor) D VQZ M Symbol position single position double position closed center position exhaust center ody type ase mounted Seal type Restrictor Nil None With S Note) Note) vailable with rubber seal valve only. Function Symbol Specifications DC C Nil Standard (. W) Note ) K Note ) High pressure type ( type only) (. W) Note ) Option Note ) For C specification power consumption, refer to page. position position C [Option] Configuration Note ) Flow characteristics Response time (ms) Note ) Model / ( /) / / (/ E/E) Standard: pressure: C (g) High Mass C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv. W. W VQZ- -C.7..7... or less or less or less VQZ- -C..7.... or less or less or less VQZS- -C...7... or less or less or less VQZ- -C.7..7... or less or less or less VQZ- -C..7.... or less or less or less VQZS- -C...7... or less or less or less 8 VQZ- -C.7....8. or less or less or less VQZ- -C...... or less or less 7 or less VQZS- -C.....8. or less or less 7 or less 8 VQZ- -C...... or less or less or less VQZ- -C...... or less or less 7 or less VQZS- -C...... or less or less 7 or less 8 Note ) ased on JIS 87-8 (Value for supply pressure of. Ma, with light/surge voltage suppressor, when using clean air). Response time values will change depending on pressure and air quality. The values at the time of ON are given for double styles. Note ) Weight without sub-plate ort size [(), () port] C ø. one-touch fitting C ø one-touch fitting C ø one-touch fitting Rc /8 Note ) The one-touch fittings on the compact manifold are pressed in and therefore cannot be changed out. Note ) For inch size one-touch fittings, refer to page. Coil voltage VC (/ Hz) VC (/ Hz) VC [ VC] (/ Hz) VC [ VC] (/ Hz) VDC VDC Option Nil None DIN rail mounting D (With standard DIN rail length) DIN rail mounting D Note) (Without DIN rail) Note) Order DIN rail separately. For DIN rail part no., refer to page. Compact body ort size Symbol ort size Nil Without sub-plate Rc /8 Note) For inch size one-touch fittings, refer to page. Nil Non-locking push type (Tool required) Locking type (Tool required) CE compliant Nil Q CE marked CE compliant Nil Q CE marked Electrical entry G Grommet (DC specification) L Note) L-type plug connector with lead wire LO Note) L-type plug connector without connector M Note) M-type plug connector with lead wire MO Note) M-type plug connector without connector Note) With light/surge voltage suppressor for L, LO, M, MO Sub-plate art No. VQZC-S- (-Q) Thread type lanking late ssembly VVQZC-- Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7
Series VQZ// Dimensions: VQZ (Compact ody Type: Single Unit) VQZ - G --C- Grommet (G).8 /8 [(), () port]. x ø... pprox. 7. 7. Restrictor 8. E E... MX. X. /8 [(), (E), (E) port].. 8 7. M x.8 (External pilot port) (External pilot only) L-type plug connector (L) M-type plug connector (M) pprox. 8. [.]. 8. [8.] E E 8. [.] pprox. E E [ ]: C [ ]: C Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
ase Mounted Series VQZ// Dimensions: VQZ (Compact ody Type: Manifold) VVQZC- Stations ort size D side Grommet (G) L 87. 8. (.8).. () (7.) 7.7 7. 7.. L-type plug connector (L) 7. 7. C 8 R.7.7 pprox. L (itch) = L L (Rail mounting hole pitch:.) L (Station ) /8 (itch) = /8 [(), () port] (itch) =. [7.] R (Station n) U side (DIN rail clamp thread) (8) (.) () (DIN rail) () 7. x ø. 8. 7.8 One-touch fitting [(), () port] pplicable tubing O.D.: ø., ø/8" ø, ø/" ø, ø/" pprox. Max..7 M-type plug connector (M).7. pprox. (Lead wire length) 8. /8 [(), (R) port].. (.). The dashed lines indicate the DIN rail mounting [-D].. [8.]. SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7 The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). [ ]: C 7.8 [.] 8. [.8] 7. [7.] The dashed lines indicate the DIN rail mounting [-D]. Unless otherwise indicated, dimensions are the same as Grommet (G). [ ]: C. [.8] [.] 8. [8.] Dimensions L n L L L L L 8. 7 7 8 87. 8. 8. 7. 8 8 7. 7 7 7.. 8 8. 7 8 8 87. 7. 8. 7. 87 Formula: L = n + L = n + n: Stations (Max. stations) 7 8 8. 8. 8. 8. 7 7. 7 87.. 7.. 8 7 8 8. 7.. 8.. 7 8 Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
Series VQZ Options ase Mounted External ilot Specification The external pilot specification is used when the operating pressure is below the minimum operating pressure. to. Ma or when valve is used for a vacuum application. Order a valve by adding the external pilot specification [R] to the part number. Valve art No. VQZ R Manifold art No. Entry is the same as standard products. VVQZ C R Entry is the same as standard products. Metal seal Rubber seal Operating pressure range Note) External pilot port ressure Specifications VQZ// Series position single position double position Note) External pilot pressure range. to.7 Ma VQZ, position only. to.7 Ma. to.7 Ma. to.7 Ma. to.7 Ma ka to.7 Ma Note) In case of the high pressure type, upper limit of max. operating pressure and external pilot pressure range is Ma. Inch Size One-touch Fittings and Optional Threads Inch size one-touch fittings and NT, NTF and G thread are available. Manifold art No. VVQZ N7 TC Valve art No. Entry is the same as standard products. Cylinder port Symbol N N N7 N N NM Note ) M pplicable tubing ø/8" ø/" ø/" ø/" ø/8" Mixed M /8 / O.D. thread thread thread VQZ Cylinder port VQZ VQZ (Compact) VQZ Note ) Mixing one-touch fittings and thread types is impossible. Note ) Metric size one-touch fittings (C ) are also available. VQZ T Thread type (Cylinder port and (), (R), (R) ports) Nil N T F Rc NT NTF G Entry is the same as standard products. I Enclosure (ased on IEC) DIN terminal is available with I enclosure. How to Order Single Valve (pplicable to the VQZ/ rubber seal with the exception of the external pilot type) VQZ Y W Entry is the same as standard products. Thread type (Cylinder port and (), (R), (R) ports) Nil N T F Rc NT NTF G Note) The pilot exhaust I valves is common with main valve exhaust. (The standard valve has an individual exhaust for the pilot valve.) Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com
Series VQZ ase Mounted Replacement arts One-touch Fitting ssembly (for Cylinder port) Model Fitting size VQZ VVQ--C VQZ VQZ Note) urchasing order is available in units of pieces. Without lead wire: SY-- (with connector and sockets only) Lead wire length Nil mm mm mm mm mm mm mm mm How to Order Include the connector assembly part number together with the part number for the plug connector s solenoid valve without connector. Example) In case of mm of lead wire DC VQZ-LO-M SY--- C VQZ-LO-M SY--- <Gasket and screw assembly> art no. VQZ VQZ-GS- VQZ VQZ-GS- VQZ VQZ-GS- Note) bove part number consists of units. Each unit has one gasket and two screws. urchasing order is available in units of pieces. <Sub-plate> Model VQZ VQZ VQZ Thread type <lug connector assembly> DC: SY--- VC: SY--- VC: SY--- Other C voltages: SY--- Sub-plate part no. VQZ-S- (-Q) VQZ-S- (-Q) VQZ-S- (-Q) C C C C8 C VVQ--C VVQ--C <ilot valve assembly> V VVQ--C VVQ--C VVQ--C Function Symbol Specifications DC C Nil Note) Standard High speed response type (. W) (. W) K Note) High pressure type (. W) ( type only) Note) Option Coil voltage VC (/ Hz) VC (/ Hz) VC [ VC] (/ Hz) VC [ VC] (/ Hz) VDC VDC DC G LU LOU MU MOU <DIN terminal type (pplicable to the VQZ/)> V Symbol Function Symbol Specifications DC C Nil Note) Standard High speed response type (. W) (. W) K Note) High pressure type (. W) ( type only) Note) Option Coil voltage VC (/ Hz) VC (/ Hz) VC [ VC] (/ Hz) VC [ VC] (/ Hz) VDC VDC G C LZ LOZ MZ MOZ Symbol Y YO YZ YS YOS VVQ--C8 VVQ--C8 Y X VVQ--C pplicable model (Length of screws attached is different from each other.) Nil VQZ/ and side of VQZ single, double solenoid type side of VQZ position side of VQZ position Electrical entry Light/surge Electrical entry voltage suppressor Grommet (DC specification) None L-type plug connector with lead wire L-type plug connector without connector Yes M-type plug connector with lead wire M-type plug connector without connector Electrical entry Electrical entry DIN terminal DIN terminal without connector DIN terminal with light/surge voltage suppressor DIN terminal with surge voltage suppressor (DC specification) DIN terminal with surge voltage suppressor, without connector (DC specification) Note) For C voltage valves there is no S option. It is already built-in to the rectifier circuit. Light/surge voltage suppressor None Yes Yes (Without light) Caution When replacing only the pilot valve assembly, use caution because it is not possible to convert to a V (DIN terminal) from a V (Grommet, L-type, M-type), or vice versa. Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 8-7-Main Office: () 88--Outside Local rea: (8) 8--www.stevenengineering.com 7 SJ SY SV SYJ SZ V S7 VQ VQ VQ VQC VQZ SQ VFS VFR VQ7