V&KL dental rotor d.o.o. Šmartinska cesta 152 SI-1000 Ljubljana, Slovenia tel: +386 1 361 61 57 fax: +386 1 361 61 58 info@vkl-dentalturbines.biz www.vkl-dentalturbines.biz V&KL dental rotor Catalogue 2 14
Technical Features of Dental Cartridges (pull test > 4.00kp) Every rotor is marked with a serial No. Balansing: 150µg Eccentricity of bur in rotation: MAX 0,01mm Shaft assembly: Laser Welded Shaft hardness (Ø 3.175 ±0.001 ): 52 HRC 4-lines clamping mechanism; Borer extracting force: 30-40N; Borer guide hardness: 64HCR; Opening dimension: Ø 0/1,6 +0,005 The clamping accuracy after 12 months of exploitation: 0,005-0,010 Push button opening force: 22N High speed ceramic or steel ball bearings with torlon cage, appropriate for autoclave, with radial play or angular contact configuration. Quality Products, Fast Delivery, Good Technical Support... the Advantages That Make Your Job Easier!
00. Replacement Cartridges for High Speed Dental Handpieces BEARINGS Without Steel Ceramic Integral Shield/ Original Design Cartridges for Siemens 4000S 20.000 20.005 20.006 / TM1 20.010 20.015 20.016 / TS1/TS2 20.020 20.025 20.026 / Cartridges for Sirona BEARINGS Without Steel Ceramic Integral Shield/ Original Design T1 Control/TC3 22.000 22.005 22.006 / T2 Control 22.010 22.015 22.016 22.018 Cartridges for Kavo 609/619 21.000 / / 21.009 630/640 21.010 21.015 21.016 21.019 632 21.020 21.025 21.026 / T2/T3 Racer 22.020 22.025 22.026 22.028 Sirona T1 TMC Mini 22.030 / 22.036 / Sirona T1/T2/T3 Mini 22.040 22.045 22.046 22.048 Sirona Siro Boost 22.050 22.055 22.056 22.058 635 / 21.035 21.036 21.039 636/646 21.040 21.045 21.046 / 637 / 21.055 21.056 / 639/642/645 21.060 21.065 21.066 / 647/649 / 21.075 21.076 / 650 / 21.085 21.086 21.089 655/660 21.090 21.095 21.096 21.099 680 21.100 / / 21.109 4500/5000 21.110 / / 21.119 6000 21.120 / / 21.129 6500 / / 21.136 / 7000 for original bearings 21.140 / / 21.149 7000 for not original bearings / 21.155 21.156 / 8000 / 21.165 21.166 21.169 Cartridges for W&H 395/396/695/696 23.000 23.005 23.006 / 398/795/895/898 23.010 23.015 23.016 23.018 796/896 23.020 23.025 23.026 / Trend TC95 23.030 23.035 23.036 / Synea TA98 (1998) 23.040 23.045 23.046 23.048 Synea TA98 LED/C LED/C/LM/M/ CLM/CM 23.050 23.055 23.056 23.058 Synea TA97 LED/C/CLM/CM 23.060 23.065 23.066 23.068 Synea TA96 23.070 23.075 23.076 23.078 Alegra TE-95/Synea TA98 (2007) 23.080 23.085 23.086 23.088 Alegra TE-98 23.090 23.095 23.096 23.098 Alegra TE-95 (2009)/TE-98 C LED 23.100 23.105 23.106 23.108 2 3
BEARINGS Without Steel Ceramic Integral Shield/ Original Design Cartridges for Bien Air Cartridges for NSK Black Pearl / Croma / Boralina 24.000 24.005 24.006 / Bora S36-L 24.010 24.015 24.016 / Ti Max-X700/BL/KL/SL/ WL / / 26.006 / Ti Max-X600 and X650/BL/KL/SL/WL / / 26.016 / Prestige / Prestilina / 24.025 24.026 / Ti Max-NL9000M/SM/KM/WM/BM and X500/BL/KL/SL/WL/L / / 26.026 / Cartridges for Castellini High Power M 25.000 25.005 25.006 / Gold 25.010 25.015 25.016 25.018 Cartridges for Star 430 27.000 27.005 27.006 / Castellini Silent Power 25.020 25.025 25.026 25.028 4 5
01. High Speed Dental Bearings Steel Ceramic a: MYONIC High Speed Dental Bearings b: BARDEN High Speed Dental Bearings All bearings with Deep Groove configuration - DGBB (Radial contact), Torlon cage, except * : Bearings with Angular Contact configuration ACBB, Torlon cage. for Bien Air (3,175x7,938x3,571), Smooth 1010M 1011M for Castellini (3,175x6,350x2,779), Flanged 1020M 1021M for Kavo (3,175x6,350x2,779), Groove 1030M 1031M for Kavo (3,175x6,350/2,769x2,380), Smooth - for K7000/K6000 rear / 1032M* for Kavo (3,175x6,350/2,779x2,380), Groove - for K635 rear/k6000 front / 1033M* All bearings with Deep Groove configuration - DG (Radial contact) for Bien Air (3,175x7,938x3,571), Smooth 1010B 1011B for Castellini (3,175x6,350x2,779), Flanged 1020B 1021B for Kavo (3,175x6,350x2,779), Groove 1030B 1031B for Siemens (3,175x6,350x2,380), Groove 1060B 1061B for W&H Wide (3,175x6,350x2,779), Smooth 1082B 1083B for Kavo (3,175x6,350/4,180x3,230), Groove - for K650 front / 1034M* for Kavo (3,175x6,350x2,779), Groove - for K650 rear; K635 front / 1035M* for Kavo (3,175x6,450/2,679x2,380), Groove - for K680 rear; K4500/5000 / 1036M* for Siemens (3,175x6,350x2,380), Groove 1060M 1061M for Star (3,175x6,350x2,779), Unique 1070M* 1071M* for W&H Narrow (3,175x6,350x2,380), Smooth 1080M 1081M for W&H Wide (3,175x6,350x2,779), Smooth 1082M 1083M for W&H Wide (3,175x6,350x2,779), Smooth / 1084M* for W&H Synea (3,175x6,350x2,779), Integral shield / 1086M* 6 7
02. Back Caps for Handpieces 24013 Push Button Back Cap for Bien Air Bora 24003 Push Button Back Cap for Bien Air Black Pearl 21013 Push Button Back Cap for Kavo 630/640 21083 Push Button Back Cap for Kavo 650 210134 Friction Grip Back Cap for Kavo 630/640 23003 Push Button Back Cap for W&H 395 23013 Push Button Back Cap for W&H 398/795/895 21063 Push Button Back Cap for Kavo 642 21093 Push Button Back Cap for Kavo 655 21123 Push Button Back Cap for Kavo 6000/7000 22023 Push Button Back Cap for Sirona Racer 22003 Push Button Back Cap for Sirona Control T1/Siropure P Control 21163 Push Button Back Cap for Kavo 8000 21033 Push Button Back Cap for Kavo 635/637 03. O-Rings and Wavy Washers 33100 O-Ring for Bien Air Bora/Croma (8 x 1 mm) 33101 O-Ring for Kavo (6 x 1 mm) 33115 O-Ring for Kavo (6 x 1,06 mm), new models 33102 O-Ring for W&H (6 x 0,8 mm) 33103 O-Ring for Star 33106 O-Ring for Castellini 33107 O-Ring for Bien Air Prestige, large 33110 O-Ring for Bien Air Prestige, small 33109 O-Ring for Sirona T2/T3 (6,36 x 0,82 mm) 33118 O-Ring for NSK 33119 O-Ring for Kavo 609/619 33108 Wavy Washer for Kavo 655/660/7000 33117 Wavy Washer for Kavo 8000 33112 Wavy Washer for W&H 20003 Push Button Back Cap for Siemens 4000S 8 89
04. Keys for Back Caps 41014 Back Cap Key for Kavo 630/640/642 06. LED Bulbs 67000LED LED bulb for Bien Air HS handpieces and quick connectors 41034 Back Cap Key for Kavo 635/637 41094 Back Cap Key for Kavo 647/649/650/655/6000/7000 43044 Back Cap Key for W&H Synea TA98 (2 points key) 43074 Back Cap Key for W&H Synea TA96 (2 points key) 44014 Back Cap Key for Bien Air Bora 44004 Back Cap Key for Bien Air Croma 42014 Back Cap Key for Sirona T2 Control (3 points key) 42004 Back Cap Key for Sirona models (2 points key) 67001LEDT 67001LEDM 67002LED 67003LED 67004LED 67005LED 67006LED LED bulb for Kavo quick connectors LED bulb for Kavo motors LED bulb for Bien Air motors LED bulb for Sirona quick connectors (brown) LED bulb for Sirona motors (green) LED bulb for W&H HS handpieces LED bulb for NSK quick connectors 46004 Back Cap Key for NSK TiMax 700 46014 Back Cap Key for NSK TiMax 600 05. Tools 51700 Bur measuring tool (Bur Gauge) 51705 Holder + STANDARD bearings tool + BIEN AIR bearings tool 07. Xenon Bulbs 77000 Xenon bulb for Bien Air HS handpieces and quick connectors 77001 Xenon bulb for Kavo quick connectors and motors 77002 Xenon bulb for Bien Air motors 77003 Xenon bulb for Sirona quick connectors 77004 Xenon bulb for Sirona motors 51710 51715 Tool for disassembling of bearings with the dimensions 3.175 x 6.350 mm and inner ring dimensions 4 mm and 4.1mm (standard bearings) Tool for disassembling of bearings with the dimensions 3.175 x 7.938 mm and inner ring dimensions 4.39 mm and 4.47 mm (Bien Air bearings) 77005 Xenon bulb for W&H HS handpieces 77006 Xenon bulb for NSK quick connectors 51736 Strength Controller (Dynamometer for chuck testing) 10 11
08. Electrical Rotors for Head Gears 83800 Rotor for Kavo motor K9 EWL950 (674 1261) 83801 Rotor for Kavo motor K10 (674 3321) 83802 Rotor for Kavo motor Intra K186 (676 0211) 83803 Rotor for Kavo motor K190, K196 (674 0871) 83804 Rotor for Kavo motor K192 (676 0971) 83805 Rotor for Kavo motor K193 (676 0991) 09. Carbon Brushes 93810 Carbon Brushes for Kavo motor K10 (674 2481) 93811 Carbon Brushes for Kavo motor K9, 186, 187, 188, 189 (676 0241) 93812 Carbon Brushes for Kavo motor 190, 192, 193, 196, 197, 200, 201 (676 0881) 93814 Carbon Brushes for MC2 (211.45.06) 93815 Carbon Brushes for MC3 (211.75.08) 93813 Carbon Brushes for Siemens (2491066) 83806 Rotor for Siemens 83808 Rotor MC2 40 LK (211.61.16) 83809 Rotor MC3 LK (211.75.29) 83821 Head gear for red Kavo contra angel 25LHA, LH, LCA, LHC (553 7341) 83822 Head gear for blue Kavo head 68LH, LU (540 3661) 83823 Head gear for blue Kavo head 68LDN (540 2491) 10. Chucks 103815 Chuck for Kavo SF4004 SF4005 (671 1562) 103816 Chuck for Kavo K9 EWL950/955, K10, K11 (674 7752) 103817 Chuck for K4, K5, K9 EWL4930/4932, K12, Power Grip (674 4871) 83827 Head gear for green Kavo head 67LH (540 3671) 83813 Set (Segment, Coli, Slide) 12 13
11. Low Speed and High Speed Dental Bearings for Straight and Contra Angels, Labaratory Instruments and Dental Machines Bearings for Kavo Dimensions in mm 220 0011 3,175 x 6,350 x 2,380 220 0012 2,380 x 4,763 x 1,588 220 0020 3 x 7 x 2 220 0021 3 x 7 x 2 220 0023 5 x 8 x 2 220 0044 7,859 x 15,898 x 5,98 220 0045 7,859 x 15,898 x 7,5 220 0051 3 x 7 x 2,5 x 3,35 220 0053 2,35 x 5,5 x 2,3 220 0055 7 x 14,1 x 7,5 220 0056 10 x 19 x 7 220 0058 KIT 220 0055 + 220 0056 220 0067 2,38 x 4,763 x 1,588 220 0068 4x13x5 mm 220 0069 4 x 13 x 5 220 0089 4 x 11 x 4 220 0097 3 x 8 x 3 220 0098 3 x 8 x 3 220 0102 3 x 7 x 3 220 0103 4 x 9 x 4 220 0104 3 x 6 x 2 220 0105 4 x 7 x 2 220 0106 5 x 8 x 2 220 0112 7 x 14 x 5 220 0113 8 x 16 x 6 220 0126 5 x 11 x 5 220 0136 2 x 6 x 2,3 14 Dimensions in mm 220 0138 4 x 11 x 4 220 0139 4 x 11 x 4 220 0144 2 x 6 x 2,3 220 0148 8 x 14 x 4 220 0157 4 x 11 x 4 220 0158 2 x 6 x 2,3 220 0161 3 x 7 x 2 220 0171 4 x 9 x 2,5 220 0174 4 x 11 x 4 220 0175 3 x 7 x 2 220 0179 3 x 7 x 2 220 0180 3,175 x 7,938 x 2,779 220 0218 3 x 8 x 3 220 0219 5 x 11 x 5 220 0223 5 x 11 x 4 220 0713 3 x 7 x 3 220 0730 2,35 x 5 x 1,5 220 0734 4 x 7 x 2 220 0778 3 x 8 x 4 220 0779 4 x 11 x 4 220 0797 4 x 9 x 2,5 220 1301 4 x 9 x 4 220 1302 5 x 8 x 3 220 1306 5 x 9,525 x 3,175 220 2004 3 x 7 x 2,5 220 2005 4 x 7 x 2 247 6056 8 x 22 x 7 247 6057 8 x 22 x 7 647 3841 K11 Set 1 000 3586 Set 1 000 7185 5 x 8 x 3 15
1 000 8101 3 x 8 x 3 1 001 2834 2 x 5 x 1,5 1 001 2836 4 x 7 x 2 1 001 3167 3,175 x 6,35 x 1,190 x 2,76 1 003 5383 2 x 5 x 1,5 1 004 0203 Set 1 004 0207 7 x 14 x 5 E25L Front Ceramic Bearing / E25L Back Ceramic Bearing / Bearings for Bien Air Dimensions in mm 701.01.14 3,175 x 7,938 x 3,571 701.01.23 2,38 x 7,938 x 3,571 701.01.70 2,38 x 7,938 x 3,571 701.01.71 4 x 11 x 4 701.01.81 4 x 7 x 2 Bearings for SHICK Dimensions in mm 4120 8 x 16 x 6 4178 3 x 7 x 3 4179 3 x 7 x 3 5212 4 x 9 x 4 611/1+2 7 x 14 x 5 7111 8 x 15,875 x 6 7120 10,15 x 19 x 7 7212 5 x 9,525 x 3,75 x 4 Bearings for W&H Dimensions in mm 01206200 3 x 8 x 4 01241800 3 x 10 x 4 01381900 5 x 8 x 2 01565800 5 x 8 x 2 01577000 3 x 10 x 4 01579300 2,35 x 5,5 x 2 01579600 2,35 x 5,5 x 2 01589400 3 x 7 x 2 01589600 4 x 7 x 2 1672300 / 05294400 5 x 8 x 3 01850600 3,175 x 7,983 x 3,571 02649400 4 x 7 x 2 02685500 5 x 11 x 5 03202200 7 x 14 x 5 03202300 8 x 16 x 6 04027300 4 x 7 x 2 04033500 3 x 6 x 2 04061900 2,38 x 7,938 x 3,571 04062000 4 x 11 x 4 04096800 3,175 x 7,983 x 3,571 04733900 2,35 x 5,5 x 2 04486000 4 x 7 x 2 05027200 5 x 10 x 4 05039400 4 x 7 x 1,6 05257200 3,4 x 6,5 x 1,6 05798700 16 17
Bearings for NSK Bearings for SIRONA / SIEMENS Dimensions in mm Dimensions in mm B10111-0704 4 x 7 x 2 7044688 6 x 10,35 x 2,98 B10211-1004 4 x 10 x 3 4181108 5 x 8 x 2 B10313-0703 3 x 7 x 2 4181157 3 x 7 x 2 B10321-1005 5 x 10 x 3 4181173 / 5890855 3,175 x 7 x 2 B11223-1005 5 x 10 x 4 4181132 3 x 8 x 3 B11223-1306 6 x 13 x 5 4181199 3 x 10 x 4 B12223-1005 5 x 10 x 4 7036130 2 x 6 x 2,3 B11243-1306 6 x 13 x 5 7040801 4 x 9 x 4 B13213-0804 4 x 8 x 3 for Head Gear S200L 3,175 x 6 x 2 B13313-0703 4 x 7 x 2,5 B12213-0704 4 x 7 x 2,5 B19317-4723 2,38 x 4,763 x 1,588 B20215-2763 6,35 x 12,7 x 4,763 B20245-2763 6,35 x 12,7 x 4,763 B22227-7923 2,38 x 7,938 x 3,571 18 19
Sets of Bearings for K4/K5 220 0055 220 0056 for K9 220 0113 220 0157 220 0158 for K10 220 0113 220 0778 220 0779 for W&H Synea WA56LT (till 2007) for head gear 01589600 x 2 for middle gear 01579300 x 2 for back gear 01589400 01577000 for K11 674 3841 for K12 220 0044 220 0055 for Kavo 192 220 0089 220 0136 for EWL 955 220 0113 220 0148 for EWL 4005 220 0112 247 6057 for Kavo 25 LP 1001 2836 1001 3167 for Kavo 68LDN 220 0105 220 0713 for Kavo 68LH 220 0051 220 2005 for Bien Air MC2 701 01 14 701 01 23 for Bien Air MC3 701 01 70 701 01 71 for W&H Synea WA56LT (from 2007) for head gear 05039400 x 2 for middle gear 01579300 x 2 for back gear 01589400 01577000 for W&H Synea WA99LT (till 2007) for head gear 04486000 x 2 for middle gear 01579600 x 2 for back gear 01565800 x 2 for W&H Synea WA99LT (from 2007) for head gear 05798700 05257200 for middle gear 01579600 x 2 for back gear 01565800 x 2 20 21
Shipping and Delivery We ship all orders within 48 hours after receiving the receipt and approval of your payment. We offer air mail shipping or Express post shipping. We charge 6,50 EUR shipping costs if sending by air mail and 40,00 EUR if sending by UPS for all EU orders. International orders are shipped only with express post. Customers outside the EU are responsible for any taxes or duties that may apply to their country. V&KL dental rotor is official distributor of TEHNODENT cartridges for EU market. Technodent is company specialised in production of dental cartridges. Clamping borer mechanism, patented by the company itself, fits completely the build-in dimensions of dental handpieces of world known producers. Returns and Replacements We offer 12 month warranties on all dental cartridges with ball bearings. We do not offer any warranty on dental cartridges without ball bearings. Warranties do not cover misuse or lack of maintenance on the part of the user. In the event of a valid warranty please enclose copy of our invoice, or your document with the dates of purchase of claimed cartridges, to your return shipment. We offer free replacements or repairs upon receipt and inspection of your item. Warranties apply only to parts sold by us during the specified time period covered by the warranty. Damage caused during return shipment due to unsuitable packaging is not a covered warranty item. V&KL dental rotor supplies MYONIC rotors as well. The dental handpiece industry is where Myonic first earned its reputation for excellence and innovation, for Myonic has supplied miniature ball bearings to high-tech industries worldwide for over 75 years. Their dental products deliver long life, reach speeds up to 500,000 rpm and can withstand repeated sterilization cycles. They are specifically designed for durability and low noise emission. Payment and Pricing We accept bank transfers only. We do not accept any credit cards. All of our articles are priced competitively compared to the prices charged by manufacturers. We use top quality OEM and aftermarket parts in all of our dental cartridges. Please be aware there are quality differences in aftermarket parts. We offer premium products because we want to give our customers best quality. We may offer quantity discounts. These offers are communicated with each customer separately. Ordering and Viewing Orders You can place your orders by sending us an E-mail or by using price inquiry chart on our website. On the basis of received quotation you can place an order at any time by sending an E-mail or fax. Customers will be sent an E-mail once their order is shipped which will contain a tracking number when sending by express post. For any further questions please e-mail, fax or simply call us! The V&KL dental rotor company and Tehnodent company and its products are in no way connected with the Bien Air, Castellini, Faro, Kavo, NSK, Shick, Siemens, Sirona, W&H and Star companies mentioned in this catalogue. 22 Design: Miha Deisinger 23