BMW E46 Android Touch Screen Radio Installation Instructions

Similar documents
OE Style Touch Screen Navigation

E90 AVIN Non-iDrive Head Unit Install with Logic 7 Integration

spec.dock BMW 5-Series e60 v.2 Installation Instructions

Genuine Corvette Accessories Carbon Fiber Radio Surround Installation Instructions for Corvettes.

by B6 Boost Volkswagen -> (46) Golf & Jetta V (13) Passat B6 (11) Passat B5.5 (4) Phaeton (8) Eurovan (7) Touareg (3) Audi

Bremmen Automatic Headlight Conversion Kit Installation Instructions

Thank you for purchasing your new ECS Tuning Adjustable Clutch Pedal Stop, we appreciate your business! Project Overview:

for Audi B7/A4 ( ) Part Number ES8017 Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit

MKVI Jetta Fog Light Kit

PART NUMBER: H630SSJ000. Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4)

Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit

Volkswagen MKVI Jetta w/keyless Start Traction Control Button Retrofit Kit Installation Instructions

vacuum/boost vent mounted ES best viewed in Acrobat Reader This tutorial is provided as a courtesy by ECS Tuning.

EN: CIGARETTE LIGHTER KIT LEGACY / OUTBACK, IMPREZA, ASCENT,FORESTER. Installation Instruction. No. Name Qty Socket ASSY 1 Plug 1 Ring 1 TOOLS NEEDED

Push Start Ignition (05-10 All) Installation

INSTALLATION INSTRUCTIONS

RS5mesh style Grille. Audi A5/S5. Installation Instructions. pre-facelift ES best viewed in Acrobat Reader

Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit

Installation Instructions

ES Installation Instructions. best viewed in Acrobat Reader. This tutorial is provided as a courtesy by ECS Tuning.

Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit

BMW 7 Series BMW Bluetooth Hands-Free Telephone system Replacement

General Applicability Note: Recommended Tools. Personal & Vehicle Protection Safety Goggles Seat Covers Floor Covers Special Tools. Installation Tools

Audi A3 8P RS4-Style Grille

Volkswagen MKVI GTI Carbon Fiber Front Diffuser Installation Instructions

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Audi B5 A4/S4 B6 A4 APR Performance Chip Tune ECU Removal and Installation

Thank you for purchasing your new Carbon Fiber Front Strut Brace, we appreciate your business! Project Overview:

TOYOTA tc HANDS FREE BLU LOGIC Preparation

Ziza Interior Lighting Package Installation ES

Audi C6 A6 RS-style Grille Installation Tutorial

Ziza Interior Lighting Package Installation ES

INSTALLATION INSTRUCTIONS

Remove four screws from radio trim

Required Parts and Tools

INSTALLATION INSTRUCTIONS

Installation Procedures

Installation Instructions

TOYOTA CAMRY HANDS FREE BLU LOGIC Preparation

Audi B6/B7 A4/S4/RS4 Refrigerated Glove Box Kit. Part Number ES This tutorial is provided as a courtesy by ECS Tuning.

EN: CIGARETTE LIGHTER KIT LEGACY / OUTBACK IMPREZA. Installation Instruction. No. Name Qty Socket ASSY 1 Plug 1 Ring 1 TOOLS NEEDED

INSTALLATION INSTRUCTIONS

(1) Remote Control with (2) AAA Batteries

BMW E46 AVIN Avant-2 Installation Guide

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Aux Port. Installation Instructions For Radio Harness

Ziza Interior Lighting Package Installation ES

VW MK7 Golf/GTI/R/SportWagen S2T Aluminum Paddle Shifter Set Installation Instructions

M-7210-Z3 Focus Short-Throw Shifter (fits 2000-April 2002) INSTALLATION INSTRUCTIONS

Toggle Button Kit. Installation Instructions MK5 / MK6 Golf, MK5 Jetta

Ziza Interior Lighting Package Installation Procedures

Mercedes Benz SLK Class

INSTALLATION INSTRUCTIONS

2015 Copyright Maxspeed-Motorsports.com

TOYOTA VENZA HANDS FREE BLU LOGIC Preparation

BA/BF ICC Install Instructions - DISCONNECT BATTERY Negative terminal.

Toggle Button Kit. Installation Instructions

Installation Procedures

MKVI Jetta Fog Light Kit

INSTALLATION INSTRUCTIONS C-VS-2000-DUR-1 20 VEHICLE SPECIFIC CONSOLE for 2018 Dodge Durango with Standard Shifter

INSTALLATION INSTRUCTIONS INFINITI CELLPORT UNIVERSAL HANDS FREE SYSTEM

Volkswagen MK6 Golf and Jetta Sportwagen Fog Light Conversion Kit Installation

Hatch Button Kit. Installation Instructions

INSTALLATION GUIDE. AV8900H Dual Multimedia Headrest Replacement System

INSTALLATION INSTRUCTIONS

Raxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler)

Under-Seat Storage Tray

Audi Q5/SQ5 Ziza LED Interior Lighting Kit Installation Instructions

Installation Instructions - ECS Tuning Vent Pod Vacuum/Boost Gauge Kit

Audi B7 A4 Street Shield Skid Plate Installation Instructions

INSTALLATION INSTRUCTIONS

MINI VIDI Integrated Digital Vent Gauge

MK7 Installation Instructions

Ziza Interior Lighting Package Installation ES for BMW F10-5 Series (2011+)

INSTALLATION GUIDE Car Show Dual DVD Headrest Replacement System

PART NUMBER: H630SXC001. Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4)

M GT 2005 up Mustang ENGINE START Push-Button INSTRUCTION SHEET

INSTALLATION INSTRUCTIONS

For additional technical tips, please visit

Installation Instructions PISTOL GRIP HANDLE Fits: Dodge Challenger and Charger w/ Automatic Transmission Catalog #

Audi B5 A4 Street Shield Skid Plate Installation Instructions

INSTALLATION INSTRUCTIONS

Audi Brembo Q5 4-Piston Caliper Upgrade Installation Information

Volkswagen MKIV 1.8T/2.0L/VR6 XAS Cold Air Intake System Installation

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3

Ziza Interior Lighting Package Installation Procedures

Ziza Interior Lighting Package Installation Procedures

Essentials. Simple and Easy to Follow Installation Manual % Free Call! Expert Advice.

Ziza Interior Lighting Package Installation Procedures

INSTALLATION GUIDE AV7900 Dual Multimedia Headrest Replacement System

ECS Tuning 3095 Cleveland-Massillon Rd. Norton, Ohio Phone Fax Web

DASH AUDIO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev 01 04/16 Page 1 of 6. Verify accessory fitment at Polaris.com.

Ziza Interior Lighting Package Installation Procedures

BODY-24, Late Model 944 ( and Newer) Dash Replacement

LGT-306L / LB Club Car Precedent LED Light Bar Bumper Kit Installation Instructions

STEPS FOR REMOVING REAR ASHTRAY & CUP HOLDER, CENTER ARMREST, E- BRAKE CONSOLE, FRONT ASHTRAY, LOWER CENTER CONSOLE AND GLOVE BOX

TOYOTA im NAVIGATION UPGRADE Preparation

Transcription:

BMW E46 Android Touch Screen Radio Installation Instructions Enjoy your new Android Radio from Bremmen Parts, we appreciate your business. Vibrant Touch Display This radio features a responsive 9 touch display capable of stunning HD resolution. Easy Installation: Each kit includes all required hardware for your specific vehicle, making installation quick and seamless. Easy Audio Streaming: Music can be easily streamed from your mobile device via bluetooth or USB. Music can also be listened to via flash drive, Micro SD, or imported to the radio s internal storage. Thousands of Apps: From the Google play store you can download your favorite audio streaming service, video streaming apps, or even apps that can diagnose and monitor your vehicles systems. Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

Listed below are the components which will need to be removed in order to install the new radio: 1. RH trim panel 2. LH trim panel 3. Upper Vent 4. Factory Radio 5. Climate Control Panel 6. Factory radio cage 7. Storage Bin 8. Mounting Bracket 9. Center Console 2 3 4 5 7 8 9 6 1 Listed below are the different ports on the back of the radio and components we will be plugging into them: 1. Wiring harness 2. Radio antenna 3. GPS antenna 4. WiFi antenna 5. USB port 2 4 5 3 1 This photo shows what the radio will look like once installed. All of the mounting brackets and hardware are included for an easy installation. 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 2 OF 14

1 2 3 4 5 6 7 8 9 1. WiFi Antenna 2. USB Port 3. GPS Antenna 4. CAN-bus decoder Here s what s included in the box: 5. Wiring Harness (Early Models) 6. Wiring Harness (Late Models) 7. USB Adapter 8. Radio Antenna Adapter 9. Component Input Adapter 1 2 3 Here s all the tools required for this install: 1. Phillips Screwdriver 2. T10 Torx 3. Trim Removal Tools 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 3 OF 14

Section 1: Removing the Stock Radio Step #1 Step #2 Step #3 Step #4 Ensure that your battery is disconnected prior to beginning installation. Use a non-marring trim removal tool to gently pry on the RH trim panel and remove it as shown in the #1 photo below. Repeat this procedure to remove the LH trim panel (not shown). Remove the two screws which secure the upper vent to the dash and radio. Carefully pry up along the bottom of the vent to pop it free from the dash. Set the vent aside on top of the dash, there is no need to disconnect the cable. Remove the last two screws holding the radio to the cage. 1 2 3 4 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 4 OF 14

Section 1: Removing the Stock Radio Step #5 Step #6 Step #7 Step #8 Pull the radio partially out of the cage. Pry upward as shown on the factory connector sliding lock to release it from the back side of the unit. Remove the two other connectors from the back of the radio. Firmly pull the climate control panel forward to pop it free from the cage. Disconnect the four connectors from the back of the climate control panel. Set the climate control panel aside. 5 6 7 8 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 5 OF 14

Section 1: Removing the Stock Radio Step #9 Step #10 Step #11 Remove the last two screws (arrows) securing the factory radio cage. Pull the cage out from the dash. Using a small hack saw, shears or other suitable cutting tool, trim away the excess dash material (highlighted in RED). This will help the radio to sit flush against the dash once installed. In order to install the new radio, we need to relocate the climate control panel to the lower mounting bracket, If your vehicle has a factory navigation system, or your climate control panel is already located in the lower mounting bracket, please skip to step #1 on page 11. Step #12 Grasp the upper storage bin and pull it forward to pop it free from the mounting bracket. 9 10 11 12 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 6 OF 14

Section 1: Removing the Stock Radio Step #13 Step #14 Step #15 Step #16 Remove the two vertical screws (arrows) which secure the lower mounting bracket. Firmly gasp the shift knob and pull straight up to pop it free from the shifter. Pry up on the shift boot assembly to pop it free. Lift the whole shift boot assembly off the shifter and disconnect the connector (arrow). 13 14 15 16 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 7 OF 14

Section 1: Removing the Stock Radio Step #17 Step #18 Step #19 Step #20 Remove the two screws securing the center console trim (arrows). Disconnect the two connectors (arrows). Remove the two screws (arrows) which secure the mounting bracket to the center console. Remove the two connectors from the bottom of the outlet (arrows). 17 18 19 20 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 8 OF 14

Section 1: Removing the Stock Radio Step #21 Step #22 Step #23 Step #24 Disconnect the two connectors (arrows) from the back of the accessory panel and pull the whole mounting bracket out from the cage. Remove the two T10 screws securing the accessory panel to the mounting bracket. Remove the cigarette lighter and ash tray from the mounting bracket. Transfer the cigarette lighter and ash tray to the new mounting bracket. 21 22 23 24 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 9 OF 14

Section 1: Removing the Stock Radio Step #25 Step #26 Step #27 Step #28 Install the accessory panel into the new mounting bracket with the two T10 screws. Install the four screws (arrows) securing the cage to the dash. Reconnect the connectors and install the center console trim with the two screws. Reconnect the connector and install the shift boot assembly and shift knob. 25 26 27 3 28 4 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 10 OF 14

Section 2: Installing the New Radio Step #29 Step #30 Step #1 Step #2 Route the four climate control wires down to the newly installed mounting bracket, and connect them to the climate control panel. Install the climate control panel into the cage. Inspect the factory connector and identify if it utilizes round style pins (early models) or flat style pins (later models), and select the corresponding wiring harness. Install the appropriate harness into the factory connector and close the sliding lock. Install the CAN-bus decoder module into the white connector in the new harness. 29 30 31 42 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 11 OF 14

Section 2: Installing the New Radio Step #3 Step #4 Step #5 Step #6 Install the included radio antenna adapter onto the factory radio antenna cable. Plug the black connector on the new wiring harness into the back of the new radio. Plug the radio antenna adapter into the back of the new radio. Install the new GPS antenna by doing the following: - Find a suitable location to mount the GPS antenna which is clear of obstacles that may cause signal interference. - Mount the GPS antenna in the desired location using double-sided tape or the integrated magnet. - Route the cable from the mounting location to the back of the new radio, removing trim panels to tuck and secure the cable as needed. 3 4 5 6 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 12 OF 14

Section 2: Installing the New Radio Step #7 Step #8 Step #9 Connect the GPS antenna connector into the back of the new radio. Screw the WiFi antenna into the back of the new radio and tighten it until snug. Install the USB adapter harness into the back of the new radio. Step #10 Install the USB port by doing the following: - Find a convenient location to mount the USB port, we found the center console to work well on this model. - Plug the USB port into the USB adapter labeled USB-OTG on the back of the new radio. - Route the USB port to the desired mounting location, removing trim panels to tuck and secure the cable as needed. 7 8 9 10 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 13 OF 14

Section 2: Installing the New Radio Step #11 Step #12 Slide the new radio into the dash and adjust it until the radio face is flush with the rest of the dash. Install the two mounting screws and tighten them until they are snug, but do not over tighten them. Install the vent and secure it to the radio with the two screws. Turn the radio on and test for functionality (sound, video, steering wheel controls, GPS, Wifi, etc.) then: - Reinstall the RH trim panel. - Reinstall the LH trim panel. Congratulations, your installation is complete! 11 12 1000 SEVILLE RD. WADSWORTH, OH 44281 1.800.924.5172 WWW.ECSTUNING.COM PAGE 14 OF 14