Replacement s List Includes Illustrations and Replacement s Dryflo Mist Collectors and Patent s: 5,611,922 6,007,608 This manual is property of the owner. Leave with the unit when set-up and start-up are complete. Donaldson Company reserves the right to change design and specifications without prior notice. RPL 4589000 Revision 8
Donaldson Company, Inc. 2
s Express Line 800-365-1331 Contents s Drawing 1, Dryflo Mist Collector... 4 s Drawing 2, Hopper Screen... 6 s Drawing 3, First-Stage Filter... 7 s Drawing 4, Second-Stage Filter Wrap... 8 s Drawing 5, Third-Stage Filter Cartridge with Second-Stage Filter Wrap... 9 s Drawing 6, Inlet Assembly... 10 s Drawing 7, Power Pack Assembly... 12 s Drawing 8, Leg Assembly... 13 s Drawing 9, Remote-Mount Magnehelic Gauge... 14 s Drawing 10, Door-Mount Magnehelic Gauge... 16 s Drawing 11, Tubing and Fitting Kit... 17 s Drawing 12, P-Trap Assembly... 18 s Drawing 13, Drain Collection Container... 19 s Drawing 14, HEPA Filter Assembly... 20 s Drawing 15, Roof/Baffle Assembly... 21 s Drawing 16, NEMA Control Box... 22 s Drawing 17, IEC/UL Control Box... 24 s Drawing 18, NEMA Control Box Assembly with Step-Down Transformer and Optional Interlock 26 s Drawing 19, IEC Control Box Assembly with Step-Down Transformer and Optional Interlock... 28 s Drawing 20, NEMA Remote Enclosure Assembly... 30 s Drawing 21, IEC/UL Remote Enclosure Assembly... 31 s Drawing 22, Conduit Connections... 32 Magnehelic is a registered trademark of Dwyer Instruments, Inc. Data Sheet Serial Ship Date Installation Date Customer Name Address Filter Type Accessories Other Dryflo Mist Collector, s and 3
Donaldson Company, Inc. Dryflo Mist Collector 1-14 1-13 1-12 1-11 See Power Pack 1-10 1-9 1-8 1-7 1-15 1-1 1-2 1-3 See Second-Stage Filter Assembly 1-4 1-3 1-6 See Leg Assembly 1-5 s Drawing 1, Dryflo Mist Collector 4
s Express Line 800-365-1331 1-1 6MM 3472900 Lifting Lug 1-2 2053900 Hole-Tight Seal 1-3 1656200 Silicone Sealant 1-4 6MM 2435800 Cap Plug, 8-in 6MM 3482300 Cap Plug, 12-in 1-5 5PM 3515202 Horizontal Door Gasket 1-6 3EA 3471801 Filter Retention Lever 3EA 3471802 Filter Retention lever 1-7 5PM 3515201 Vertical Door Gasket, Lower 5PM 3515204 Vertical Door Gasket, Lower 5PM 3515205 Vertical Door Gasket, Lower 1-8 4MA 3475002 Bottom Door Weldment 4MA 3475003 Bottom Door Weldment 1-9 7539901 Vise Action Latch 1-10 4020101 Lift-Off Hinge, Right Hand 1-11 5PM 3515203 Vertical Door Gasket, Upper and D1 1-12 3509000 Latch, Tool Operated 1-13 4670600 5/16-in Hex T-Handle Tool 1-14 6MM 3505401 Top Door Panel with Gauge Hole and D1 6MM 3505402 Top Door Panel without Gauge Hole and D1 1-15 9RS 0824000 Polyfoam Sheet, 1 1/2-in with PSA Dryflo Mist Collector, s and 5
Donaldson Company, Inc. Hopper Screen 2 Hopper Screen hopper 2 s Drawing 2, Hopper Screen 2 4MA 3475402 Screen Weld with Handle 6
s Express Line 800-365-1331 First-Stage Filter 3 First-Stage Filter s Drawing 3, First-Stage Filter 3 P030594 First-Stage Filter, Wire Mesh and D1 3 EA 3508602 First-Stage Filter, Kimre (Polypropylene Mesh) and D1 Dryflo Mist Collector, s and 7
Donaldson Company, Inc. Second-Stage Filter Wrap 4 Second-Stage Filter Wrap s Drawing 4, Second-Stage Filter Wrap 4 P031097 P031098 Second-Stage Filter Wrap Second-Stage Filter Wrap 8
s Express Line 800-365-1331 Third-Stage Filter Cartridge with Second-Stage Filter Wrap 5 Third-Stage Filter Cartridge with Second-Stage Filter Wrap s Drawing 5, Third-Stage Filter Cartridge with Second-Stage Filter Wrap 5 3EA 3587702 Third-Stage Filter Cartridge with Second-Stage Filter Wrap 3EA 3587703 Third-Stage Filter Cartridge with Second-Stage Filter Wrap Dryflo Mist Collector, s and 9
Donaldson Company, Inc. Inlet Assembly 6-4 6-4 6-3 6-5 6-1 Inlet Collar Assembly 6-2 Inlet Weldment Assembly s Drawing 6, Inlet Assembly 10
s Express Line 800-365-1331 6-1 3EA 2445004 Inlet Collar Assembly, 6-in ID 3EA 2445005 Inlet Collar Assembly, 7-in ID 3EA 2445006 Inlet Collar Assembly, 8-in ID 6-2 2SG 3572001 Inlet Weldment Assembly, 6-in ID 2SG 3572002 Inlet Weldment Assembly, 7-in ID 2SG 3572003 Inlet Weldment Assembly, 8-in ID 2SG 3572004 Inlet Weldment Assembly, 9-in ID 2SG 3572005 Inlet Weldment Assembly, 10-in ID 2SG 3572006 Inlet Weldment Assembly, 11-in ID 2SG 3572007 Inlet Weldment Assembly, 12-in ID 6-3 6MM 2445104 Inlet Collar, 6-in ID 6MM 2445105 Inlet Collar, 7-in ID 6MM 2445106 Inlet Collar, 8-in ID 6-4 1854300 Sealant, Paintable and D1 6-5 4MA 3571801 Inlet Weldment, 6-in ID 4MA 3571802 Inlet Weldment, 7-in ID 4MA 3571803 Inlet Weldment, 8-in ID 4MA 3571804 Inlet Weldment, 9-in ID 4MA 3571805 Inlet Weldment, 10-in ID 4MA 3571806 Inlet Weldment, 11-in ID 4MA 3571807 Inlet Weldment, 12-in ID Dryflo Mist Collector, s and 11
Donaldson Company, Inc. Power Pack Assembly 7 Power Pack Assembly 7-1 7-2 7-6 7-3 7-4 7-5 s Drawing 7, Power Pack Assembly 7 2SG 3446902 Power Pack, 3 Hp, 60 Hz 2SG 3446903 Power Pack, 7 1/2 Hp, 60 Hz 7-1 1958600 Motor, 3 Hp TEFC, 3450, 208-230/460/60/ 3 1958800 Motor, 3 Hp TEFC, 3450, 575/60/ 3 0182600 Motor, 7 1/2 Hp TEFC, 3450, 208-230/460/60/ 3 1741200 Motor, 7 1/2 Hp TEFC, 3450, 575/60/ 3 7-2 6MM 1075601 Motor Mount Plate 6MM 1095300 Motor Mount Plate 7-3 3464000 Blower Wheel, Radial, 10.62 x 4-in 3464100 Blower Wheel, Radial, 13.5 x 3.5-in 7-4 0509700 1/4-in Diameter Rope-Type Sealant 7-5 0230200 Rotation Label 7-6 4MA 3467200 Cartridge/Blower Housing Weldment, 10.62 x 5.14-in 4MA 3467400 Cartridge/Blower Housing Weldment, 13.5 x 4.74-in 12
s Express Line 800-365-1331 Leg Assembly 8 Leg Assembly stub leg 3/8-in flat washer M8-1.25 hex bolt 8-1 3/8-16 (M10-1.5) anchor bolt M8-1.25 hex nut s Drawing 8, Leg Assembly 8 2SG 3470902 Leg Assembly and D1 8-1 6MM 3470802 Formed Leg and D1 Dryflo Mist Collector, s and 13
Donaldson Company, Inc. Remote-Mount Magnehelic Gauge 9 Magnehelic Gauge Assembly left side of unit when facing door 9-6 9-5 9-4 9-1 9-2 9-2 9-11 9-8 blower housing exhaust side 9-10 9-3 9-4 9-5 9-6 9-7 9-8 filter cartridge panel dirty-air chamber 9-9 s Drawing 9, Remote-Mount Magnehelic Gauge 14
s Express Line 800-365-1331 9 2SG 3564305 Magnehelic Gauge Assembly with Door 2SG 3564309 Magnehelic Gauge Assembly without Door 9-1 7545201 Magnehelic Pressure Gauge 9-2 5PM 4609801 Plastic Tubing, 3/16-in ID x 2-ft 9-3 6MM 2324600 Mounting Panel 9-4 1647700 Elbow, 90 Tube to Pipe 9-5 0900608 Flat Washer, 3/8-in Type A, ZP Steel 9-6 3782000 Adapter 1/8 NPT to 3/16-in Tube 9-7 3564000 Tubing, 1/16-in ID 9-8 2675800 Adapter, 1/8-in NPT to 3/16-in Tube 9-9 2324501 Static Pressure Tap Tee, Brass 9-10 2288100 Tee, Male Plastic 9-11 2510600 Cable Tie, Nylon Dryflo Mist Collector, s and 15
Donaldson Company, Inc. Door-Mount Magnehelic Gauge 10 Magnehelic Gauge Assembly 10-5 10-1 10-2 10-4 10-2 10-2 filter cartridge panel 10-3 s Drawing 10, Door-Mount Magnehelic Gauge 10 2SG 3564307 Magnehelic Gauge Assembly with Door 2SG 3564309 Magnehelic Gauge Assembly without Door 10-1 7545201 Magnehelic Pressure Gauge 10-2 2675800 Adapter, 1/8-in NPT to 1/16-in Tube 10-3 2324501 Static Pressure Tap Tee, Brass 10-4 2288100 Tee, Male, Plastic 10-5 5PM 2334200 Plastic Tubing, 3/16-in ID x 2-ft 16
s Express Line 800-365-1331 Tubing and Fitting Kit 11 Plastic Tubing and Fitting Kit 11-1 3/16-in diameter plastic tubing, 35-ft 11-2 3/16-in diameter plastic barbed tee 11-3 3/16-in diameter plastic barbed s Drawing 11, Tubing and Fitting Kit 11 2SG 2893200 Plastic Tubing and Fitting Kit 11-1 5PM 2334200 3/16-in Plastic Tubing, 35-ft 11-2 4588300 3/16-in Barbed Tee Connector, Plastic 11-3 4588200 3/16-in Barbed Union Connector, Plastic Dryflo Mist Collector, s and 17
Donaldson Company, Inc. P-Trap Assembly 12 P-Trap Assembly hopper 12-5 12-6 12-1 12-2 12-5 12-4 12-3 s Drawing 12, P-Trap Assembly 12 2SG 3470302 P-Trap Assembly, NPT 2SG 3470303 P-Trap Assembly, NPT 12-1 6MM 3470402 1 1/2-in NPT x 16.50-in Galvanized Pipe Nipple 6MM 3470403 1 1/2-in NPT x 17.50-in Galvanized Pipe Nipple 12-2 3203331 1 1/2-in NPT Galvanized Tee 12-3 3252031 1 1/2-in NPT Plug, Galvanized 12-4 6MM 3470203 1 1/2-in NPT x 6-in Galvanized Pipe Nipple 12-5 3203131 1 1/2-in NPT x 90 Elbow, Galvanized 12-6 6MM 3470202 1 1/2-in NPT x 5-1/2-in Galvanized Pipe Nipple and D1 Not Illustrated 1798600 L octite Pipe Sealant 18
s Express Line 800-365-1331 Drain Collection Container 13 Drain Collection Container Assembly 13-1 spacer ring 3 required 13-2 13-3 13-4 13-5 s Drawing 13, Drain Collection Container 13 2SG 3560701 Drain Collection Container Assembly 1-Gallon w/ Drain, NPT 13-1 6MM 3646000 Spacer, 2.375-in, 3 Required 13-2 3560400 Reducer Bushing, 1 1/2 to 1-in NPT 13-3 5PM 3560600 Jug, Wide Mouth, 1-Gallon 13-4 3560800 3/4-in NPT Hex Lock Nut 13-5 3560500 Faucet, Plastic 1798600 Pipe Sealant Dryflo Mist Collector, s and 19
Donaldson Company, Inc. HEPA Filter Assembly 14 HEPA Filter Assembly 14-1 14-2 14-7 14-2 14-10 14-9 14-6 14-3 14-4 14-5 14-6 14-8 14-4 s Drawing 14, HEPA Filter Assembly 14 2SG 3471404 HEPA Filter Assembly, Field Kit 2SG 3485600 HEPA Filter Assembly 14-1 4MA 3474700 Roof Weldment 14-2 0509700 1/4-in Diameter Rope-Type Sealant 14-3 4MA 3480802 Bracket Support Weldment 14-4 4557900 Wing Screw, (M8) 1.25 x 40 DIN 316 14-5 4MA 3471500 HEPA Filter Frame Weld 14-6 P030625 Filter, Absolute HEPA 24 x 24 x 12-in and D1 14-7 6MM 3485900 Roof Panel with HEPA 14-8 6MM 3484300 Hold Down Bracket 14-9 4MA 7484501 HEPA Filter Frame Weld 14-10 1656200 Silicone Sealant 20
s Express Line 800-365-1331 Roof/Baffle Assembly 15 Roof/Baffle Assembly 15-1 15-3 clean-air chamber 15-2 s Drawing 15, Roof/Baffle Assembly 15 2SG 3488302 Roof/Baffle Assembly and D1 15-1 6MM 3473600 Panel Roof 15-2 9RS 0824000 Polyfoam Sheet, 1 1/2-in with PSA 15-3 4MA 3557300 Baffle Weldment Dryflo Mist Collector, s and 21
Donaldson Company, Inc. NEMA Control Box 16 NEMA Control Box Assembly Not available as replacement part. L1 L2 L3 16-1 16-5 16-4 coil overloads reset RUN G START G STOP G 16-2 16-3 T1 T2 T3 OFF s Drawing 16, NEMA Control Box 22
s Express Line 800-365-1331 Note: When ordering replacement parts, supply the job number located inside the control panel door. If no job number is listed, supply part number information directly from the part. Component manufacturers and suppliers may change without notice. 16-1 3508702 Light, 240-Volt Green 3508703 Light, 480-Volt Green 3508704 Light, 600-Volt Green 16-2 3508901 Push Button, Green NO 16-3 3508902 Push Button, Red NC 16-4 4059424 Motor Heater Element, 230-Volt 4059417 Motor Heater Element, 460-Volt 4059415 Motor Heater Element, 575-Volt 4059434 Motor Heater Element, 230-Volt 4059427 Motor Heater Element, 460-Volt 4059424 Motor Heater Element, 575-Volt 16-5 3206004 Starter, NEMA, Size 0, 3 Ph, 230-Volt Coil 3206005 Starter, NEMA, Size 1, 3 Ph, 230-Volt Coil 3206006 Starter, NEMA, Size 0, 3 Ph, 460-Volt Coil 3206007 Starter, NEMA, Size 1, 3 Ph, 460-Volt Coil 3206008 Starter, NEMA, Size 0, 3 Ph, 575-Volt Coil DMC- C 3206009 Starter, NEMA, Size 1, 3 Ph, 575-Volt Coil Dryflo Mist Collector, s and 23
Donaldson Company, Inc. IEC/UL Control Box 17 IEC/UL Control Box Assembly Not available as replacement part. 17-3 START 17-1 17-2 17-4 17-5 17-6 17-7 STOP sub-panel 17-8 A1 A2 L1 L2 L3 L3 T1 T2 T3 14 17-9 A2 A2 X 95 96 97 98 T1 T2 T3 Sub-Panel s Drawing 17, IEC/UL Control Box 24
s Express Line 800-365-1331 17-1 3498603 Push Button, Lighted Start 17-2 3498601 Push Button, Stop Red 17-3 3523500 Adapter Mounting Block 17-4 3494202 Contact, NO, Start Cover Mount 17-5 3578301 Lamp Socket, 230-Volt 3578401 Lamp Socket, 460-Volt 3578402 Lamp Socket, 575-Volt 17-6 3501001 Lamp, 230-Volt 3501002 Lamp, 460/575-Volt 17-7 3494201 Contact, NC, Stop Cover Mount 17-8 3493203 Contactor, 230-Volt DMC- C 3493207 Contactor, 230-Volt 3493202 Contactor, 460-Volt DMC- C 3493206 Contactor, 460-Volt 3493205 Contactor, 575-Volt 17-9 3533102 Overload Relay, 460/575-Volt 3533104 Overload Relay, 230-Volt 3533104 Overload Relay, 460/575-Volt 3533105 Overload Relay, 230-Volt Dryflo Mist Collector, s and 25
Donaldson Company, Inc. NEMA Control Box Assembly with Step-Down Transformer and Optional Interlock 18 NEMA Control Box Assembly with Step-Down Transformer and Optional Interlock L1 L2 L3 18-7 18-1 18-6 18-5 coil overloads reset T1 T2 T3 T1 RUN G START G STOP G 18-2 18-3 18-4 terminal strip 1 2 3 4 5 6 7 8 9 10 11 12 s Drawing 18, NEMA Control Box Assembly with Step-Down Transformer and Optional Interlock 26
s Express Line 800-365-1331 18 8 PP 3558300 230-Volt AC Starter with step Down Transformer Assembly, 3 Hp Blower* 8 PP 3557700 460-Volt AC Starter with Step Down Transformer Assembly, 3 Hp Blower* 8 PP 3561200 575-Volt AC Starter with Step Down Transformer Assembly, 3 Hp Blower* 3558100 230-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 3 Hp Blower* 3557500 460-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 3 Hp Blower* 3561000 575-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 3 Hp Blower* 8 PP 3514300 230-Volt AC Starter with Step Down Transformer Assembly, 7 1/2 Hp Blower* 8 PP 3511600 460-Volt AC Starter with Step Down Transformer Assembly, 7 1/2 Hp Blower* 8 PP 3567900 575-Volt AC Starter with Step Down Transformer Assembly, 7 1/2 Hp Blower* 3514000 230-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 7 1/2 Hp Blower* 3511300 460-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 7 1/2 Hp Blower* 3567400 575-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 7 1/2 Hp Blower* 18-1 3508701 Light, 120-Volt Green 18-2 3508901 Push Button, Green NO 18-3 3508902 Push Button, Red NC 18-4 3510400 Terminal Block 18-5 4059424 Motor Heater Element, 230-Volt 4059417 Motor Heater Element, 460-Volt 4059415 Motor Heater Element, 575-Volt 4059434 Motor Heater Element, 230-Volt 4059427 Motor Heater Element, 460-Volt 4059424 Motor Heater Element, 575-Volt 18-6 3206001 Starter, NEMA, Size 0, 3 Ph, 230/460/575-Volt 3206002 Starter, NEMA, Size 1, 3 Ph, 230/460/575-Volt 18-7 3510701 Transformer, 240/480-120 (Covers 230/460-Volt) 8 PP 3510702 Transformer, 600/120 (Covers 575-Volt) Dryflo Mist Collector, s and 27
Donaldson Company, Inc. IEC Control Box Assembly with Step-Down Transformer and Optional Interlock 19 IEC/UL Control Box Assembly with Step-Down Transformer and Optional Interlock START 19-1 19-2 19-4 19-5 19-6 19-7 19-8 STOP OFF Hand Auto 19-3 sub-panel 19-9 A1 A2 19-10 19-11 19-12 L1 L2 L3 L3 T1 T2 T3 14 A2 A2 X 95 96 97 98 T1 T2 T3 T1 19-13 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 terminal strip Sub-Panel s Drawing 19, IEC Control Box Assembly with Step-Down Transformer and Optional Interlock 28
s Express Line 800-365-1331 19 8 PP 3559500 230-Volt AC Starter with Step Down Transformer Assembly, 3 Hp Blower* 8 PP 3558900 460-Volt AC Starter with Step Down Transformer Assembly, 3 Hp Blower* 8 PP 3561800 575-Volt AC Starter with Step Down Transformer Assembly, 3 Hp Blower* 3559300 230-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 3 Hp Blower* 3558700 460-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 3 Hp Blower* 3561600 575-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 3 Hp Blower* 8 PP 3566900 230-Volt AC Starter with Step Down Transformer Assembly, 7 1/2 Hp Blower* 8 PP 3565800 460-Volt AC Starter with Step Down Transformer Assembly, 7 1/2 Hp Blower* 8 PP 3568800 575-Volt AC Starter with Step Down Transformer Assembly, 7 1/2 Hp Blower* 8 PP 3566700 230-Volt AC Starter with Step Down Transformer Assembly, 7 1/2 Hp Blower* 8 PP 3565600 460-Volt AC Starter with Step Down Transformer Assembly, 7 1/2 Hp Blower* 3568600 575-Volt AC Starter with Step Down Transforme r and Interlock Assembly, 7 1/2 Hp Blower* 19-1 3498602 Push Button, Lighted Start 19-2 3498601 Push Button, Stop Red 19-3 8 PP 3523400 Selector Switch (If Present) 19-4 3523500 Adapter Mounting Block 19-5 3494202 Contact, NO, Start, Cover Mount 19-6 3510701 Lamp, 130-Volt 19-7 3488902 Lamp Socket 19-8 3494201 Contact, NC, Stop, Cover Mount 19-9 3493204 Contactor, 230/460/575-Volt 3493211 Contactor, 230-Volt 3493210 Contactor, 460-Volt 3493204 Contactor, 575-Volt 19-10 3533104 Overload Relay, 230-Volt 3533102 Overload Relay, 460/575-Volt 3533105 Overload Relay, 230-Volt 3533104 Overload Relay, 460/575-Volt 19-11 3489202 Terminal Block Fuse 19-12 3489300 Terminal Block 19-13 8 PP 3510701 Transformer, 240/480-120 (Covers 230/460-Volt) 8 PP 3510702 Transformer, 600/120 (Covers 575-Volt) Dryflo Mist Collector, s and 29
Donaldson Company, Inc. NEMA Remote Enclosure Assembly 20 NEMA Remote Enclosure Assembly 20-1 RUN G START G STOP 20-2 20-3 R s Drawing 20, NEMA Remote Enclosure Assembly 20 3EA 3517600 NEMA Remote Enclosure Assembly 20-1 3508701 Light, Green 120-Volt AC 20-2 3508901 Push Button Light, Green NO 20-3 3508902 Push Button Light, Red NC 30
s Express Line 800-365-1331 IEC/UL Remote Enclosure Assembly 21 IEC/UL Remote Enclosure Assembly 21-1 21-2 21-7 21-6 21-3 21-4 21-5 s Drawing 21, IEC/UL Remote Enclosure Assembly 21 3EA 3579900 Remote Enclosure Assembly, 120-Volt 60 Hz 21-1 3494204 Contact, NO, Start, Surface Mount 21-2 3498800 Adapter Mounting Block 21-3 3501001 Lamp, 130-Volt 21-4 3488901 Lamp Socket 21-5 3494203 Contact, NC, Stop, Surface Mount 21-6 3498601 Push Button, Stop Red 21-7 3498602 Push Button, Lighted Start Dryflo Mist Collector, s and 31
Donaldson Company, Inc. Conduit Connections 22 Conduit Connections See Detail A 22-1 22-2 cabinet blower housing 22-3 22-4 22-1 22-5 motor junction box electrical enclosure 22-6 22-2 s Drawing 22, Conduit Connections Detail A, View Rotated 90 22-1 3582700 Conduit, Flex, Liquid-Tigh t 22-2 3332400 1/2-in x 90 Elbow Connector 22-3 3582401 Reducing Washer 22-4 3581900 Connector, St. Flex Cord 22-5 3582500 Adapter, Liquid-Tigh t 22-6 3582600 Sealing Ring 32
s Express Line 800-365-1331 Service Notes Date Service Performed Notes Dryflo Mist Collector, s and 33
This Page Intentionally Left Blank
Limited Warranty Donaldson warrants to the original purchaser that the major structural components of the goods will be free from defects in materials and workmanship for ten (10) years from the date of shipment, if properly installed, maintained and operated under normal conditions. Donaldson warrants all other Donaldson built components and accessories including Donaldson Airlocks, TBI Fans, TRB Fans, Fume Collector products and Donaldson built Afterfilter housings for twelve (12) months from date of shipment. Donaldson warrants Donaldson built filter elements to be free from defects in materials and workmanship for eighteen (18) months from date of shipment. Donaldson does not warrant against damages due to corrosion, abrasion, normal wear and tear, product modification, or product misapplication. Donaldson also makes no warranty whatsoever as to any goods manufactured or supplied by others including electric motors, fans and control components. After Donaldson has been given adequate opportunity to remedy any defects in material or workmanship, Donaldson retains the sole option to accept return of the goods, with freight paid by the purchaser, and to refund the purchase price for the goods after confirming the goods are returned undamaged and in usable condition. Such a refund will be in the full extent of Donaldson s liability. Donaldson shall not be liable for any other costs, expenses or damages whether direct, indirect, special, incidental, consequential or otherwise. The terms of this warranty may be modified only by a special warranty document signed by a Director, General Manager or Vice President of Donaldson. Failure to use genuine Donaldson replacement parts may void this warranty. THERE EXIST NO OTHER REPRESENTATIONS, WARRANTIES OR GUARANTEES EXCEPT AS STATED IN THIS PARAGRAPH AND ALL OTHER WARRANTIES INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED. s and Service For genuine Donaldson Torit replacement filters and parts, call the s Express Line 800-365-1331 USA 800-343-3639 within Mexico www.donaldsontorit.com For faster service, have unit s model and serial number, part number, description, and quantity available. Donaldson Company, Inc. Industrial Air Filtration P.O. Box 1299 Minneapolis, MN 55440-1299 dustmktg@mail.donaldson.com Donaldson Company, Inc. is the leading designer and manufacturer of dust, mist, and fume collection equipment used to control industrial-air pollutants. Our equipment is designed to help reduce occupational hazards, lengthen machine life, reduce in-plant maintenance requirements, and improve product quality. 2002 Donaldson Company, Inc. Printed in USA RPL 4589000 Revision 8 August 2005