.5 00 (mm)hxwxd (Amps) 0x,5x, CSA, A: :0 (AC5b) 5A: 8:0000 0xx8 5A: 65:0080 0xx8 0 T C V Remote operation Series + protection Remote operation of 0, 0 and 00 is facilitated by the dedicated remote operator kit. The operator (IP5/NEMA) is mounted on the cabinet front and allows remote control, status indication and motor monitoring of an individual using RS85 serial. It incorporates the following features: AC5b* (Amps) (mm) HxWxD 8A: 6: 5 5 A: 6: 5 8 0x98x6 A: 6: 5 8A: 6: 5 C 60A: 6: 5 0/ A: 6: 59 0 5xx9 85A: 6: 59 Ctick 00A: 6: 59 0A: 6: 59 0x0x 70A: 6: 59 00A: 6: 59 0 E.g. kw 0 kw 0 0 00 0 V 00 5 V 6 00 5 8 00 0 85 0 0 5 00 500 600 700 AC5a* (Amps) (mm) HxWxD 6A: 0: 500 8A: 0: 500 A: 0: 500 0A: 0: 500 5xx70 5A: 0: 500 70A: 0: 500 76A: 0: 500 00A: 0: 500 C 0A: 0: 500 59A: 0: 500 5x6x70 88A: 0: 500 Ctick 98A: 0: 500 5x96x70 99A: 0: 500 5A: 0: 500 5A: 0: 500 850xx80 5A: 0: 500 666A: 0: 500 78A: 0: 500 985A: 0: 500 86A: 0: 500 000x560x5 8A:0: 500 0 0 00 Serial V AC/DC 0 0V AC * Example: AC5b: A: 6: 5 starting current max. times FLC (A) in 6 seconds. 5 seconds minimum between starts. Start/stop, reset LED for start, run, trip Trip codes Current display Motor temp. display 0 ma output T C V IP5/NEMA 0 and 0 come with optional plugin modules for serial. DeviceNet Profibus Modbus RTU ASi* Optional modules are available for serial with 00: DeviceNet Profibus Modbus RTU (*as of May 005) E.g. kw kw Constant effort to improve 00 V 00 6 V The focus is clear at Danfoss: as a leading supplier of drives solutions throughout the world, we have spent years accumulating our technological and application knowhow. Danfoss drives have been produced since 968 and Danfoss Bauer geared 5 7 Enclosure Bookstyle IP ( 07) Compact IP () Compact IP0 (85) B C C0 motors since 97. Today, a long list of references indicates that the name of Danfoss is widely accepted as being synonymous with excellent quality and operational security. We have focused our professional resources on just one techno logical area for years: drives solutions. Years of applying these resources to industrial production lines have given us a wealth of experience and expertise. The results speak for themselves. Danfoss has enjoyed great success, and we are proud of what we do. 0 V AC 00V AC * Example: AC5a: 70A: 0: 500 Starting current max. times FLC (70A) in 0 seconds 50% on load duty cycle and max. 0 starts per hour. 00, 0, 0, 00 s in tables above are for max. 0 C ambient temperature. For other ratings contact Danfoss. DKDD.PB.06.B.0 VLT is a trademark of Danfoss A/S www.simpatico.dk.00.
Type Concept VLT Soft Start Controller 00 VLT Soft Start Controller 00 0 A true fit and forget soft starter for DIN rail mount 00 provides basic soft start and stop function a physically compact starter physically similar to providing basic soft start and 0 but providing enhanced soft start functionality and stop functionality various motor protection functionality s Motor protection 0kW @ 00V 00 5V mains voltage 0 0V AC or V AC/DC control supply Enhanced soft start and soft stop Motor and system protection kw @ 00V 00 6V mains voltage 0 00V AC control supply Timed voltage rampup Adjustable start torque Selectable kickstart function Timed voltage rampup Adjustable initial torque Initial current rampup Initial current rampup Torque control Torque boost Dual parameter function Timed voltage rampdown Principle of Phase Angle Control A soft starter is an electronic device that regulates the voltage to the motor and this provides a smooth transition from standstill to full speed operation of the application. s all use the principle of phase angle control.: Backtoback coupled thyristors ramp up the motor voltage. In some s current transformers measure the motor current providing feedback for starting current control but also for numerous motor and application protection functions. s cover a comprehensive range ing and stopping can be controlled in a number of ways depending on the application. Some applications require nonlinear voltage rampup and the voltage ramp is therefore related to the actual current drawn. Conversely, a bandsaw usually requires a quick stop function provided by a DC brake. Then again, a number of applications require a kickstart torque for an instantaneous period of time followed by a soft rampup acceleration. s cover all of these applications and much more. 00: Micro Soft Start Controller for motors up to kw with heavy ratings as standard Unlimited number of starts per hour Contactor style design for easy selection, installation and commissioning 00: Compact Soft Starter for motors up to 0kW Voltage ramps, current limit start and intregrated motor protection Integral bypass design reduce heat dissipation Wide power range with advanced accessory modules 00: Fully featured Soft Starter for motors up to kw Total motor starting solution Advanced start, stop and protection features Local programming keypad and display Timed voltage rampdown Outputs Other features Universal two wire control Programmable via rotary for unlimited number of starts per hour LED indication IP 0 Timed voltage rampdown Linear voltage rampdown Three autoadjustable voltage ramps DC brake function Soft brake function Motor overload (adjustable trip class) Excess start time Reverse phase rotation Motor thermistor input Shorted SCR no start Supply fault no start As 0 + Under current Instantaneous overload Starter overtemperature Restart delay Warning before trips Adjustable phase imbalance sensitivity One output relay: Two output relays: Three output relays: DC brake contactor Programmable via rotary Programmable via 8 rotary Local key pad Buttons for start, stop, reset and remote control Inputs for two or three wire control IP 0 ( kw @ 00V) IP 00 ( 0kW @ 00V) IP 0 ( kw @ 00V) IP 00 ( 0kW @ 00V) Protection Control the total motor starter solution providing numerous functionality to control starting and stopping and protection of motor as well as application 0kW @ 00V 00 5V mains voltage 0 0V AC or V AC/DC control supply Protect Gear, Goods, Equipment and Environment An AC motor switched directly on to the mains power supply will struggle to reach its nominal speed as quickly as possible. This draws maximum current from the power supply and accelerates the application with its maximum torque. Depending on the application, this can cause different problems. Applications like pumps, conveyers, centrifuges and bandsaws must be started slowly, and sometimes stopped slowly, to prevent mechanical shocks such as water hammer, and strains on bands, couplings and shafts. 00 0. kw @ 00V 08 600V mains voltage 80 V AC/DC control voltage 00 Start/stop 0 Built in bars for easy connection of bypass contactor. All motor protection functions are retained in bypass mode Inside delta wiring kit ( kw) Automatic reset function Password parameter protection Trip log function IP ( kw @ 00V) IP 0 (85 kw @ 00V) Advantages of ing over Star/ Delta and Auto transformer starting Torque Soft Starters are a far better alternative to star/delta and auto transformer starters. The star/delta starter reduces start current but introduces a damaging torque transient when switching from star to delta connection. Furthermore star/ does not always allow selection of the best start current level. This sometimes means the load cannot accelerate to full speed in star configuration thereby making the star/delta starter totally ineffective. A star/delta starter does not impact the way the motor stops, thus leaving the voltage ramp down with no control. The auto transformer reduces start current but also allows some control over the level of start current. Auto transformer starters do not however eliminate the risk of a jump in torque when shifting voltage. Soft Starter xtn Auto transformer Star/Delta DOL TN Current 6xIN IN Benefits: Pumps Reduced hydraulic shocks in pipelines during start and stop Minimized mechanical stress on motor shaft Reduced starting current Undercurrent protection preventing damage from blocked pipe or low water situations (00) Automatic reset functionality ensures continued operation of unmanned pump stations (00) Phase rotation protection prevents damage from reverse pump rotation (0 and 00) Instantaneous overload protection prevents damage from debris drawn into the pump (0 and 00) Conveyors Controlled start without mechanical shocks causing damage to products and application Minimized belt stretch. Reduced counter balance stress Controlled stop without mechanical shocks Optimum soft start even with varying starting loads, e.g. coal conveyors starting loaded or unloaded (0 and 00) Extended mechanical lifetime Compressors Reduced mechanical shocks extend the life of the compressor, couplings and motor Limited start current enables large compressors to be started even when maximum power capacity is limited Phase rotation protection prevents operation in reverse direction (0 and 00) Instantaneous overload protection prevents possible damage from liquid ammonia entering the compressor screw (0 and 00) Fans Smooth application of torque Reduced starting times over star/ Centrifuges Smooth application of torque Reduced starting times over star/ Reduced stopping times thanks to DC brake and soft braking (00) Band saws Reduced time for saw band replacements since the soft braking function stops the motor quickly (00) Extended saw band life thanks to eliminated torque shocks during start Easier saw band alignment. Slow acceleration allows saw bands to be tracked without jogging Maximum overload capability available for ridethrough of operating overloads (00) The motor thermal model (0 and 00) accounts for the actual overload capability of the connected motors and will trip only if absolutely necessary.
Type Concept VLT Soft Start Controller 00 VLT Soft Start Controller 00 0 A true fit and forget soft starter for DIN rail mount 00 provides basic soft start and stop function a physically compact starter physically similar to providing basic soft start and 0 but providing enhanced soft start functionality and stop functionality various motor protection functionality s Motor protection 0kW @ 00V 00 5V mains voltage 0 0V AC or V AC/DC control supply Enhanced soft start and soft stop Motor and system protection kw @ 00V 00 6V mains voltage 0 00V AC control supply Timed voltage rampup Adjustable start torque Selectable kickstart function Timed voltage rampup Adjustable initial torque Initial current rampup Initial current rampup Torque control Torque boost Dual parameter function Timed voltage rampdown Principle of Phase Angle Control A soft starter is an electronic device that regulates the voltage to the motor and this provides a smooth transition from standstill to full speed operation of the application. s all use the principle of phase angle control.: Backtoback coupled thyristors ramp up the motor voltage. In some s current transformers measure the motor current providing feedback for starting current control but also for numerous motor and application protection functions. s cover a comprehensive range ing and stopping can be controlled in a number of ways depending on the application. Some applications require nonlinear voltage rampup and the voltage ramp is therefore related to the actual current drawn. Conversely, a bandsaw usually requires a quick stop function provided by a DC brake. Then again, a number of applications require a kickstart torque for an instantaneous period of time followed by a soft rampup acceleration. s cover all of these applications and much more. 00: Micro Soft Start Controller for motors up to kw with heavy ratings as standard Unlimited number of starts per hour Contactor style design for easy selection, installation and commissioning 00: Compact Soft Starter for motors up to 0kW Voltage ramps, current limit start and intregrated motor protection Integral bypass design reduce heat dissipation Wide power range with advanced accessory modules 00: Fully featured Soft Starter for motors up to kw Total motor starting solution Advanced start, stop and protection features Local programming keypad and display Timed voltage rampdown Outputs Other features Universal two wire control Programmable via rotary for unlimited number of starts per hour LED indication IP 0 Timed voltage rampdown Linear voltage rampdown Three autoadjustable voltage ramps DC brake function Soft brake function Motor overload (adjustable trip class) Excess start time Reverse phase rotation Motor thermistor input Shorted SCR no start Supply fault no start As 0 + Under current Instantaneous overload Starter overtemperature Restart delay Warning before trips Adjustable phase imbalance sensitivity One output relay: Two output relays: Three output relays: DC brake contactor Programmable via rotary Programmable via 8 rotary Local key pad Buttons for start, stop, reset and remote control Inputs for two or three wire control IP 0 ( kw @ 00V) IP 00 ( 0kW @ 00V) IP 0 ( kw @ 00V) IP 00 ( 0kW @ 00V) Protection Control the total motor starter solution providing numerous functionality to control starting and stopping and protection of motor as well as application 0kW @ 00V 00 5V mains voltage 0 0V AC or V AC/DC control supply Protect Gear, Goods, Equipment and Environment An AC motor switched directly on to the mains power supply will struggle to reach its nominal speed as quickly as possible. This draws maximum current from the power supply and accelerates the application with its maximum torque. Depending on the application, this can cause different problems. Applications like pumps, conveyers, centrifuges and bandsaws must be started slowly, and sometimes stopped slowly, to prevent mechanical shocks such as water hammer, and strains on bands, couplings and shafts. 00 0. kw @ 00V 08 600V mains voltage 80 V AC/DC control voltage 00 Start/stop 0 Built in bars for easy connection of bypass contactor. All motor protection functions are retained in bypass mode Inside delta wiring kit ( kw) Automatic reset function Password parameter protection Trip log function IP ( kw @ 00V) IP 0 (85 kw @ 00V) Advantages of ing over Star/ Delta and Auto transformer starting Torque Soft Starters are a far better alternative to star/delta and auto transformer starters. The star/delta starter reduces start current but introduces a damaging torque transient when switching from star to delta connection. Furthermore star/ does not always allow selection of the best start current level. This sometimes means the load cannot accelerate to full speed in star configuration thereby making the star/delta starter totally ineffective. A star/delta starter does not impact the way the motor stops, thus leaving the voltage ramp down with no control. The auto transformer reduces start current but also allows some control over the level of start current. Auto transformer starters do not however eliminate the risk of a jump in torque when shifting voltage. Soft Starter xtn Auto transformer Star/Delta DOL TN Current 6xIN IN Benefits: Pumps Reduced hydraulic shocks in pipelines during start and stop Minimized mechanical stress on motor shaft Reduced starting current Undercurrent protection preventing damage from blocked pipe or low water situations (00) Automatic reset functionality ensures continued operation of unmanned pump stations (00) Phase rotation protection prevents damage from reverse pump rotation (0 and 00) Instantaneous overload protection prevents damage from debris drawn into the pump (0 and 00) Conveyors Controlled start without mechanical shocks causing damage to products and application Minimized belt stretch. Reduced counter balance stress Controlled stop without mechanical shocks Optimum soft start even with varying starting loads, e.g. coal conveyors starting loaded or unloaded (0 and 00) Extended mechanical lifetime Compressors Reduced mechanical shocks extend the life of the compressor, couplings and motor Limited start current enables large compressors to be started even when maximum power capacity is limited Phase rotation protection prevents operation in reverse direction (0 and 00) Instantaneous overload protection prevents possible damage from liquid ammonia entering the compressor screw (0 and 00) Fans Smooth application of torque Reduced starting times over star/ Centrifuges Smooth application of torque Reduced starting times over star/ Reduced stopping times thanks to DC brake and soft braking (00) Band saws Reduced time for saw band replacements since the soft braking function stops the motor quickly (00) Extended saw band life thanks to eliminated torque shocks during start Easier saw band alignment. Slow acceleration allows saw bands to be tracked without jogging Maximum overload capability available for ridethrough of operating overloads (00) The motor thermal model (0 and 00) accounts for the actual overload capability of the connected motors and will trip only if absolutely necessary.
Type Concept VLT Soft Start Controller 00 VLT Soft Start Controller 00 0 A true fit and forget soft starter for DIN rail mount 00 provides basic soft start and stop function a physically compact starter physically similar to providing basic soft start and 0 but providing enhanced soft start functionality and stop functionality various motor protection functionality s Motor protection 0kW @ 00V 00 5V mains voltage 0 0V AC or V AC/DC control supply Enhanced soft start and soft stop Motor and system protection kw @ 00V 00 6V mains voltage 0 00V AC control supply Timed voltage rampup Adjustable start torque Selectable kickstart function Timed voltage rampup Adjustable initial torque Initial current rampup Initial current rampup Torque control Torque boost Dual parameter function Timed voltage rampdown Principle of Phase Angle Control A soft starter is an electronic device that regulates the voltage to the motor and this provides a smooth transition from standstill to full speed operation of the application. s all use the principle of phase angle control.: Backtoback coupled thyristors ramp up the motor voltage. In some s current transformers measure the motor current providing feedback for starting current control but also for numerous motor and application protection functions. s cover a comprehensive range ing and stopping can be controlled in a number of ways depending on the application. Some applications require nonlinear voltage rampup and the voltage ramp is therefore related to the actual current drawn. Conversely, a bandsaw usually requires a quick stop function provided by a DC brake. Then again, a number of applications require a kickstart torque for an instantaneous period of time followed by a soft rampup acceleration. s cover all of these applications and much more. 00: Micro Soft Start Controller for motors up to kw with heavy ratings as standard Unlimited number of starts per hour Contactor style design for easy selection, installation and commissioning 00: Compact Soft Starter for motors up to 0kW Voltage ramps, current limit start and intregrated motor protection Integral bypass design reduce heat dissipation Wide power range with advanced accessory modules 00: Fully featured Soft Starter for motors up to kw Total motor starting solution Advanced start, stop and protection features Local programming keypad and display Timed voltage rampdown Outputs Other features Universal two wire control Programmable via rotary for unlimited number of starts per hour LED indication IP 0 Timed voltage rampdown Linear voltage rampdown Three autoadjustable voltage ramps DC brake function Soft brake function Motor overload (adjustable trip class) Excess start time Reverse phase rotation Motor thermistor input Shorted SCR no start Supply fault no start As 0 + Under current Instantaneous overload Starter overtemperature Restart delay Warning before trips Adjustable phase imbalance sensitivity One output relay: Two output relays: Three output relays: DC brake contactor Programmable via rotary Programmable via 8 rotary Local key pad Buttons for start, stop, reset and remote control Inputs for two or three wire control IP 0 ( kw @ 00V) IP 00 ( 0kW @ 00V) IP 0 ( kw @ 00V) IP 00 ( 0kW @ 00V) Protection Control the total motor starter solution providing numerous functionality to control starting and stopping and protection of motor as well as application 0kW @ 00V 00 5V mains voltage 0 0V AC or V AC/DC control supply Protect Gear, Goods, Equipment and Environment An AC motor switched directly on to the mains power supply will struggle to reach its nominal speed as quickly as possible. This draws maximum current from the power supply and accelerates the application with its maximum torque. Depending on the application, this can cause different problems. Applications like pumps, conveyers, centrifuges and bandsaws must be started slowly, and sometimes stopped slowly, to prevent mechanical shocks such as water hammer, and strains on bands, couplings and shafts. 00 0. kw @ 00V 08 600V mains voltage 80 V AC/DC control voltage 00 Start/stop 0 Built in bars for easy connection of bypass contactor. All motor protection functions are retained in bypass mode Inside delta wiring kit ( kw) Automatic reset function Password parameter protection Trip log function IP ( kw @ 00V) IP 0 (85 kw @ 00V) Advantages of ing over Star/ Delta and Auto transformer starting Torque Soft Starters are a far better alternative to star/delta and auto transformer starters. The star/delta starter reduces start current but introduces a damaging torque transient when switching from star to delta connection. Furthermore star/ does not always allow selection of the best start current level. This sometimes means the load cannot accelerate to full speed in star configuration thereby making the star/delta starter totally ineffective. A star/delta starter does not impact the way the motor stops, thus leaving the voltage ramp down with no control. The auto transformer reduces start current but also allows some control over the level of start current. Auto transformer starters do not however eliminate the risk of a jump in torque when shifting voltage. Soft Starter xtn Auto transformer Star/Delta DOL TN Current 6xIN IN Benefits: Pumps Reduced hydraulic shocks in pipelines during start and stop Minimized mechanical stress on motor shaft Reduced starting current Undercurrent protection preventing damage from blocked pipe or low water situations (00) Automatic reset functionality ensures continued operation of unmanned pump stations (00) Phase rotation protection prevents damage from reverse pump rotation (0 and 00) Instantaneous overload protection prevents damage from debris drawn into the pump (0 and 00) Conveyors Controlled start without mechanical shocks causing damage to products and application Minimized belt stretch. Reduced counter balance stress Controlled stop without mechanical shocks Optimum soft start even with varying starting loads, e.g. coal conveyors starting loaded or unloaded (0 and 00) Extended mechanical lifetime Compressors Reduced mechanical shocks extend the life of the compressor, couplings and motor Limited start current enables large compressors to be started even when maximum power capacity is limited Phase rotation protection prevents operation in reverse direction (0 and 00) Instantaneous overload protection prevents possible damage from liquid ammonia entering the compressor screw (0 and 00) Fans Smooth application of torque Reduced starting times over star/ Centrifuges Smooth application of torque Reduced starting times over star/ Reduced stopping times thanks to DC brake and soft braking (00) Band saws Reduced time for saw band replacements since the soft braking function stops the motor quickly (00) Extended saw band life thanks to eliminated torque shocks during start Easier saw band alignment. Slow acceleration allows saw bands to be tracked without jogging Maximum overload capability available for ridethrough of operating overloads (00) The motor thermal model (0 and 00) accounts for the actual overload capability of the connected motors and will trip only if absolutely necessary.
.5 00 (mm)hxwxd (Amps) 0x,5x, CSA, A: :0 (AC5b) 5A: 8:0000 0xx8 5A: 65:0080 0xx8 0 T C V Remote operation Series + protection Remote operation of 0, 0 and 00 is facilitated by the dedicated remote operator kit. The operator (IP5/NEMA) is mounted on the cabinet front and allows remote control, status indication and motor monitoring of an individual using RS85 serial. It incorporates the following features: AC5b* (Amps) (mm) HxWxD 8A: 6: 5 5 A: 6: 5 8 0x98x6 A: 6: 5 8A: 6: 5 C 60A: 6: 5 0/ A: 6: 59 0 5xx9 85A: 6: 59 Ctick 00A: 6: 59 0A: 6: 59 0x0x 70A: 6: 59 00A: 6: 59 0 E.g. kw 0 kw 0 0 00 0 V 00 5 V 6 00 5 8 00 0 85 0 0 5 00 500 600 700 AC5a* (Amps) (mm) HxWxD 6A: 0: 500 8A: 0: 500 A: 0: 500 0A: 0: 500 5xx70 5A: 0: 500 70A: 0: 500 76A: 0: 500 00A: 0: 500 C 0A: 0: 500 59A: 0: 500 5x6x70 88A: 0: 500 Ctick 98A: 0: 500 5x96x70 99A: 0: 500 5A: 0: 500 5A: 0: 500 850xx80 5A: 0: 500 666A: 0: 500 78A: 0: 500 985A: 0: 500 86A: 0: 500 000x560x5 8A:0: 500 0 0 00 Serial V AC/DC 0 0V AC * Example: AC5b: A: 6: 5 starting current max. times FLC (A) in 6 seconds. 5 seconds minimum between starts. Start/stop, reset LED for start, run, trip Trip codes Current display Motor temp. display 0 ma output T C V IP5/NEMA 0 and 0 come with optional plugin modules for serial. DeviceNet Profibus Modbus RTU ASi* Optional modules are available for serial with 00: DeviceNet Profibus Modbus RTU (*as of May 005) E.g. kw kw Constant effort to improve 00 V 00 6 V The focus is clear at Danfoss: as a leading supplier of drives solutions throughout the world, we have spent years accumulating our technological and application knowhow. Danfoss drives have been produced since 968 and Danfoss Bauer geared 5 7 Enclosure Bookstyle IP ( 07) Compact IP () Compact IP0 (85) B C C0 motors since 97. Today, a long list of references indicates that the name of Danfoss is widely accepted as being synonymous with excellent quality and operational security. We have focused our professional resources on just one techno logical area for years: drives solutions. Years of applying these resources to industrial production lines have given us a wealth of experience and expertise. The results speak for themselves. Danfoss has enjoyed great success, and we are proud of what we do. 0 V AC 00V AC * Example: AC5a: 70A: 0: 500 Starting current max. times FLC (70A) in 0 seconds 50% on load duty cycle and max. 0 starts per hour. 00, 0, 0, 00 s in tables above are for max. 0 C ambient temperature. For other ratings contact Danfoss. DKDD.PB.06.B.0 VLT is a trademark of Danfoss A/S www.simpatico.dk.00.
.5 00 (mm)hxwxd (Amps) 0x,5x, CSA, A: :0 (AC5b) 5A: 8:0000 0xx8 5A: 65:0080 0xx8 0 T C V Remote operation Series + protection Remote operation of 0, 0 and 00 is facilitated by the dedicated remote operator kit. The operator (IP5/NEMA) is mounted on the cabinet front and allows remote control, status indication and motor monitoring of an individual using RS85 serial. It incorporates the following features: AC5b* (Amps) (mm) HxWxD 8A: 6: 5 5 A: 6: 5 8 0x98x6 A: 6: 5 8A: 6: 5 C 60A: 6: 5 0/ A: 6: 59 0 5xx9 85A: 6: 59 Ctick 00A: 6: 59 0A: 6: 59 0x0x 70A: 6: 59 00A: 6: 59 0 E.g. kw 0 kw 0 0 00 0 V 00 5 V 6 00 5 8 00 0 85 0 0 5 00 500 600 700 AC5a* (Amps) (mm) HxWxD 6A: 0: 500 8A: 0: 500 A: 0: 500 0A: 0: 500 5xx70 5A: 0: 500 70A: 0: 500 76A: 0: 500 00A: 0: 500 C 0A: 0: 500 59A: 0: 500 5x6x70 88A: 0: 500 Ctick 98A: 0: 500 5x96x70 99A: 0: 500 5A: 0: 500 5A: 0: 500 850xx80 5A: 0: 500 666A: 0: 500 78A: 0: 500 985A: 0: 500 86A: 0: 500 000x560x5 8A:0: 500 0 0 00 Serial V AC/DC 0 0V AC * Example: AC5b: A: 6: 5 starting current max. times FLC (A) in 6 seconds. 5 seconds minimum between starts. Start/stop, reset LED for start, run, trip Trip codes Current display Motor temp. display 0 ma output T C V IP5/NEMA 0 and 0 come with optional plugin modules for serial. DeviceNet Profibus Modbus RTU ASi* Optional modules are available for serial with 00: DeviceNet Profibus Modbus RTU (*as of May 005) E.g. kw kw Constant effort to improve 00 V 00 6 V The focus is clear at Danfoss: as a leading supplier of drives solutions throughout the world, we have spent years accumulating our technological and application knowhow. Danfoss drives have been produced since 968 and Danfoss Bauer geared 5 7 Enclosure Bookstyle IP ( 07) Compact IP () Compact IP0 (85) B C C0 motors since 97. Today, a long list of references indicates that the name of Danfoss is widely accepted as being synonymous with excellent quality and operational security. We have focused our professional resources on just one techno logical area for years: drives solutions. Years of applying these resources to industrial production lines have given us a wealth of experience and expertise. The results speak for themselves. Danfoss has enjoyed great success, and we are proud of what we do. 0 V AC 00V AC * Example: AC5a: 70A: 0: 500 Starting current max. times FLC (70A) in 0 seconds 50% on load duty cycle and max. 0 starts per hour. 00, 0, 0, 00 s in tables above are for max. 0 C ambient temperature. For other ratings contact Danfoss. DKDD.PB.06.B.0 VLT is a trademark of Danfoss A/S www.simpatico.dk.00.