Linear telescopic lifting columns dynamic capacity up to 11 tons ( kn) standard lift stroke up to 23 feet (7 m), higher lift stroke available high speed / high cycle systems
SERAPID lift systems provide a mechanical way to elevate heavy loads. Just like the horizontal motion systems, this is based on the locking and unlocking of flexibly connected, linked elements. When lifting a load, the specially shaped chain links interlock with each other, forming a rigid bar or column. When lowered, the links unlock, allowing it to remain flexible. The chain bends or coils into a compact package. Linear telescopic lifting columns The Rigid Chain combines the strengths of other transfer methods, such as belts or spindle screws, and at the same time it does away with their weaknesses. This is especially true in the case of vertical motion: repeatable positioning in the millimeter range, even at high speed standard speed up to 9 ft/s ( mm/s), faster speeds available on request load capacities to 10 tons per lifting column, stroke up to 23 ft (7 m) or more maintains position with no drift space-saving chain return storage simple configuration, design flexibility 80% system efficiency long life and low maintenance 2
ChainLift: proven rigid-chain technology ChainLift The ChainLift standard model range ChainLift 40 ChainLift 60 dyn / stat capacity [kn (lbf)] 7.5 (1700) 20 (4500) max stroke [m (in)] 1 (40) 2 (80) max speed [mm/s (ft/mn)] (40) (40) pitch of link [mm] 40 60 segment radius of drive pinions [mm] 40 60 weight of chain [kg/m] 7.8 10.5 weight of drive housing [kg] 15 45 standard magazines: length [mm] max stroke [mm] 500 396 0 0 646 688.5 1188.5 The ChainLift was developed from our horizontal push-pull chain. The links were reinforced with double plates, four driving rollers, plus larger guide rollers, making the chain capable of lifting. Additional stability is achieved in the drive housing through a thicker and longer reaction plate. The lifting force is applied through four driving pinions. For requirements outside of our specifications, please contact us. ChainLift = K = = J = I H F L max stroke N G D C O E max stroke C E F G H I J K L N O ChainLift 40 0 255 202 168.2 25 101 59 146 40 40 120 ChainLift 60 0 350 272 201.4 45 136 95 197.7 130 130 60 60 140 standard magazines, length (D) max stroke 500 0 0 ChainLift 40, D = 396 646 ChainLift 60, D = 688.5 1188.5 3
HD Lift: strength and endurance The systems in our heavy-duty line are designed for high operating cycles (> 10 cycles / h). The guaranteed minimum lifetime is one million cycles under maximum load. All types include a permanent lubrication system, with oil-proof drive housing and chain magazine. The product range includes five standard systems, covering dynamic loads up to 11240 lbf and strokes up to 8 feet. The diagram below shows the lifetime curves of our heay-duty lifts in relation to load. These curves are based on actual test data. For requirements outside of our specifications, please contact us. kn 50 40 30 20 10 HD Lift 90D HD Lift 90S HD Lift 60J HD Lift 60 The HD Lift standard model range 0 million 1.1 1.5 2.5 cycles HD Lift 40 HD Lift 60 HD Lift 60J HD Lift 90S HD Lift 90D dyn / stat capacity [kn (lbf)] 6.5 (1450) 12.5 (2800) 25 (5600) 40 (9000) 50 (11) max stroke [m (in)] 1 (40) 1.5 (60) 1.5 (60) 2 (80) 2.5 () max speed [mm/s (ft/mn)] (60) (60) (60) (60) (60) pitch of link [mm] 40 60 60 90 90 segment radius of drive pinions [mm] 40 60 60 90 90 weight of chain [kg/m] 7.8 10.5 2 x 10.5 31 49 HD Lift 40 / HD Lift 60 V = K = = J = = U = = T = W L max stroke I H M = N = Q G min F HD Lift R S D = N = = C = = E = = P = = O = All dimensions in mm. max stroke C D E F G H I J K L M N O P Q R S T U V W HD Lift 40 0 230 202 0 148.2 Ø25g6 101 60 145 40 40 120 184 170 86 10 70 70 26 8.5 HD Lift 60 1500 272 1500 180 Ø45g6 136 70 140 130 130 60 60 180 220 220 101 18 90 90 35 11 4
HD Lift HD Lift 60J 130 1500 max 210.2 250 60 60 111 R60 135 135 180 70 ø60g6 135 1500 max. 135 135 180 340 HD Lift 90S 90 0 max 90 146.5 R90 150 400 277 142 151 ø70g6 150 500 0 max. 350 HD Lift 90D 90 2500 max 90 234 380 R90 150 400 344 164 161 150 øg6 500 2500 max. 438 5
LinkLift: the lifting chain The LinkLift was specifically designed for heavy loads and significant heights. The blockshaped links, with square cross-sections, ensure the center of gravity is right in the geometric center. The links are aligned inside the drive housing and interlock to form a rigid structural column. This creates a telescopic lifting column with high strength and rigidity. This is why the LinkLift has been patented internationally and won several awards. The LinkLift standard model range LinkLift 30 LinkLift 50 / 50 R LinkLift 80 LinkLift / R dynamic load capacity [kn] 10 15 / 30 35 50 / [lbf] 2250 3350 / 6700 7850 11 / 22400 static load capacity [kn] 20 30 70 [lbf] 4500 6700 15700 22400 max stroke [m (ft)] 1.9 (6.2) 3.0 (9.8) 5.0 (16.4) 7.0 (23) nominal speed up to [mm/s (ft/mn)] (40) (40) (40) (40) system efficiency rate [%] 80 80 80 80 chain pitch [mm] 30 50 80 segment radius of pinions [mm] 30 50 80 minimum height [mm] 190 291 460 572 weight of chain [kg/m] 15 21 / 22 35 71 / 74 weight of drive housing [kg] 8 29 / 33 80 192 / 213 standard magazines: max stroke [m]: weight [kg] 1.9: 8 1.4: 19 2.2: 58 2.56: 83 2.2: 29 3.54: 82 4.56: 132 3.0: 39 5.0: 97 5.58: 159 7.0: 196 LinkLift With the reinforced version LinkLift R, the maximum load and maximum stroke cannot be used together. If this is a requirement, please contact us. Please also call for shaft dimensions of R-versions. LinkLift 30 ø10 (M8) 170 4 x ø9 (M8) 30 47 10 23.5 56.5 10 45 Longer strokes, higher speeds and special magazines on request. R30 ø80 180 2 x 6 M8 190 ø70+0.3+0.1 stroke: 1900 max. 0.5 M10 x 20 2.5 79.4 =142= =55= 2020 12 2.5 62 8 A 115 ø30g6 ø70+0,3+0.1 M10 x 20 3 1122 1135 4 x ø9 (M8) 15 135 165 30 33 15 119 134 6
LinkLift LinkLift 50 / 50R LinkLift 50 LinkLift 50R magazine sizes stroke P M < 1400 420 840 < 2 625 1250 < 0 825 1650 4 x ø13 (M12) 65 50 15 130 78 28 12 70 2x6 M8 ø 120 ø+0.3+0.1 stroke: 0 max. =118.4= =175= =80= 28 28 15 4 4 ø45g6 ø+0.3+0.1 14 18 ø60g6 255 291 A M12 x 27 5 M16 x 32 177 R50 5 4 x ø12 (M12) 2 x ø14 (M10) P 35 M 270 35 48.5 19 173 202 242 LinkLift 80 magazine sizes stroke P M < 2 665 1330 < 3540 0 0 < 5000 1365 2730 80 105 25 220 4 x ø18 (M16) 130 50 20 112 ø 220 2 x 6 M12 ø+0.3+0.1 stroke: 5000 max 181 =290= =120= 40 40 20 130 ø+0.3+0.1 5 20 402 10 4 x ø18 (M16) 60 270 74,5 2 x ø14 (M12) 305 P 52 320 345 M 424 460 18 R80 M12 x 27 M20 x 40 13 A 280 ø70g6 magazine sizes stroke P M < 2560 745 1490 < 4560 1245 2490 < 5580 1500 0 < 7000 1855 3710 130 30 280 160 60 30 4 x ø21 (M20) 140 ø 250 2x 6 M16 LinkLift ø220+0.3+0.1 stroke: 7000 max. 229.4 =368= =150= 55 55 30 6 6 163 22 ø220+0.3+0.1 LinkLift R 163 500 10 572 M12 x 27 15 R A 348 ø80g6 M20 x 40 ø79.3h11 80x74 e9 DIN 5482 2 x ø14 (M12) M 6 x 18 (M16) P 65 75 530 22 347 355 395 7
LINEA TEXT + DESIGN Linear telescopic lifting columns AXIS & Stuifmeel V Coenecoop 618-620 2741 PV Waddinxveen Netherlands Tel: +31 (0) 182 64 70 70 www.axis-stuifmeel.nl info@axis-stuifmeel.nl Official Serapid distributor for the enelux Second Edition, Revision A SERAPID USA 06-8 rand and product names are trademarks of their respective holders. Subject to change.