TECHNICAL SPECIFICATIONS MS 96217 PAGE 1 USED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors The Homag/Torwegge base construction features many technological advances that allow greater flexibility and reliability. The heavy-duty construction of all components of the Torwegge machine will provide a long life with consistent quality processing. For its foundation the machine is built with two (2) continuous machine frames and two (2) precision hardened chain track guides for both the running and guiding surfaces. Fixed side left, moveable side right. Flat guideways support the machine, coupled with motorized width adjustment using high precision spindles and spindle lubrication. The roller bearing style feed chain includes bearings on both the running and guiding surfaces with automatic chain track lubrication. This insures long feed chain life and exacting precision.
TECHNICAL SPECIFICATIONS MS 96217 PAGE 2 Workpieces are held securely for processing by the steel upper pressure beam with driven V-belt. The contour processing (CF) function on the left side of this machine suitable for processing arched workpieces of various sizes. Feed speed variable via frequency invertor. Magnetic braking of feed motor. Full lighted sound enclosure over the processing area with dust extraction channel in the machine base. Free standing switch cabinet. Installation according to UL specifications. Machine paint color grey RDS 240 80 05. Technical Specifications working level 950 mm (37-13/32") feed speed 10 to 40 m/min (ft/min) workpiece min. 130 mm + 2 times (5-1/8 ) dimensions* workpiece overhang/ profile depth max. 2600 mm (102-11/32") panel thickness min. 12.7 mm (1/2 ) max. 46 mm (1-3/16") contour depth max. 80 mm (3-5/32 ) * dimension from outside of chain to outside of chain is 130 mm (5-1/8 ). Electrical equipment installed according to UL regulations. Voltage supplied must not fluctuate in excess of +/- 5% of its stated value. Voltage must be balanced phase-to-phase and phase-to-ground. Note: Max. adjusting range is not necessarily the appropriate working speed In case of variations in technical specifications and capacities between the base machine and working units, the specifications and capacities given for the working units are to be considered correct. Conditions of floor at installation site must adhere to foundation plan.
TECHNICAL SPECIFICATIONS MS 96217 PAGE 3 Extension of Front Loading Area by 915 mm (36 ) Chain Dogs with 500mm spacing max. dog height 20 mm (25/32 ) Electronic Height Adjustment Electronic Width Adjustment CNC Adjustment for Infeed Fence with Stepless Axis for lateral adjustment to different panel overhangs CNC adjustment with servo motor Fence for Moveable Side special fence for sizing of narrow parts which must be run single sided with pneumatic cylinder to move in/out of position used with electronic width adjustment for automatic sizing position Machine Drive for Contour Processing Unit #0833 for processing curved panels enhanced line control for better resolution of line points First Column Front Side Hogging Unit 7.5 kw one (1) motor 7.5 kw, 200 Hz; 12,000 rpm adjustment vertical, manual via spindle servo axis horizontal tool diameter 120 to 200 mm (4-23/32 to 7-7/8 ) used for pre-trimming of contours Panel Support for CF Trimming Unit supporting ring at processing motor upper mounting with tension springs height adjustment: max. tolerance in panel thickness 0.3 mm
TECHNICAL SPECIFICATIONS MS 96217 PAGE 4 Hood Interlock for Noise Protection Cover Standard Trimming Unit 6.6 kw one (1) motor 6.6 kw, 100 Hz; 6000 rpm cross support, pole changing switch for direction of rotation suction hood swiveling range 180 tool diameter max. 200 mm (7-7/8 ) electronic frequency inverter with motor braking for trim/hog tool on horizontal spindle First Column Rear Side Liquid-cooled Main Spindle 7.5 kw for tool interface with HSK F 63 DIN 69893 max. useable shaft length (stack height) approx. 75 mm (2-15/16") max. tool diameter 200 mm (7-7/8 ) rpm regulation by frequency inverter (1000 to 10,000 rpm) rated capacity at 6000 rpm 1.5 kw at 1000 rpm horizontal and vertical adjustment via servo drive without tooling or HSK chuck Automatic 8-Position Tool Changer for tooling and aggregates with HSK 63 max. useable shaft length approx. 75 mm (2-15/16") tool diameter max. 200 mm (7-7/8") Panel Support for CF Trimming Unit supporting ring at processing motor upper mounting with tension springs height adjustment max. tolerance in panel thickness 0.3 mm
TECHNICAL SPECIFICATIONS MS 96217 PAGE 5 Hood Interlock For Noise Protection Cover Liquid-cooled Main Spindle 7.5 kw for tool interface with HSK F 63 DIN 69893 max. useable shaft length (stack height) approx. 75 mm (2-15/16") max. tool diameter 200 mm (7-7/8 ) rpm regulation by frequency inverter (1000 to 10,000 rpm) rated capacity at 6000 rpm 1.5 kw at 1000 rpm horizontal and vertical adjustment via servo drive without tooling or HSK chuck Automatic 8-Position Tool Changer for tooling and aggregates with HSK 63 max. useable shaft length approx. 75 mm (2-15/16") tool diameter max. 200 mm (7-7/8") Hood Interlock For Noise Protection Cover Second Column Front Side Liquid-cooled Main Spindle 7.5 kw for tool interface with HSK F 63 DIN 69893 max. useable shaft length (stack height) approx. 75 mm (2-15/16") max. tool diameter 200 mm (7-7/8) rpm regulation by frequency inverter (1000 to 10,000 rpm) rated capacity at 6000 rpm 1.5 kw at 1000 rpm horizontal and vertical adjustment via servo drive without tooling or HSK chuck
TECHNICAL SPECIFICATIONS MS 96217 PAGE 6 Automatic 8-Position Tool Changer for tooling and aggregates with HSK 63 max. useable shaft length approx. 75 mm (2-15/16") tool diameter max. 200 mm (7-7/8") Panel Support for CF Trimming Unit supporting ring at processing motor upper mounting with tension springs height adjustment max. tolerance in panel thickness 0.3 mm Hood Interlock For Noise Protection Cover Liquid-cooled Main Spindle 7.5 kw for tool interface with HSK F 63 DIN 69893 max. useable shaft length (stack height) approx. 75 mm (2-15/16") max. tool diameter 200 mm (7-7/8 ) rpm regulation by frequency inverter (1000 to 10,000 rpm) rated capacity at 6000 rpm 1.5 kw at 1000 rpm horizontal and vertical adjustment via servo drive without tooling or HSK chuck Automatic 8-Position Tool Changer for tooling and aggregates with HSK 63 max. useable shaft length approx. 75 mm (2-15/16") tool diameter max. 200 mm (7-7/8") Hood Interlock For Noise Protection Cover
TECHNICAL SPECIFICATIONS MS 96217 PAGE 7 Outfeed Transport Devices driven belts operating at slightly faster speed than the feed chain to prevent damage from dogs and facilitate efficient offloading CNC Programming System WoodWOP Post Processor for CF Operator Interface Unit PC22 Homag Unit #6322(changed from PC 21) with graphic display for user-friendly programming and machine operation
TECHNICAL SPECIFICATIONS MS 96217 PAGE 8 Electronic Control Unit #6202 control with programmable memory (PLC) all input/output indicated by LED integrated line control for the operation of all processing units recommended environmental temperature min. +5 C (41 F) max. +35 C (95 F) Software: menu-guided operation virus protection Bar Code Reading Software Bar Code Scanner Air Conditioning for electrical cabinet Diagnosis System WoodScout Homag Unit 6383 (1 left) With the WoodScout system it is possible to systematically eliminate faults which leads to a considerable decrease in down time. This software provides: graphical PLC diagnosis displayed in different levels a data base system that lets the operator/maintenance personnel enter the reason of the fault and the measures taken to correct it. The next time the fault is displayed so also is the procedure to correct it. The information is shared by all shifts and written by customer for ease of understanding. Cable Prolongation Homag Unit 6801 for switch cabinet