Pictures FOSCHF Horizontal Fiber Optic Splice Closure Characteristics Holds up to 48 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Integrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications Duct Aerial
Direct buried Parameters Outside dimension (LxWxH) Weight (excluding outside box) Number of inlet/outlet ports Diameter of fiber cable Capacity of FOSC 430x200x80 (mm) 1650g-1800g 2 (pieces) on each side (total 4 pieces) Φ8 Φ23(mm) Bunchy: 48 (Cores) Main components Name of tools Fiber cutter Fiber stripper Band tape Usage Cutting off fibers Strip off protective coat of fiber cable Measuring fiber cable Scissor Metal wrench Screwdriver Tightening nut of reinforced core Crossing/Paralleling screwdriver Accessories No. Accessories Quantity Usage Remarks Heat shrinkable 1 Protecting fiber splices protective sleeve capacity 2 Nylon tie Fixing fiber with protective coat capacity Enlarging diameter of fiber cable for 3 Insulation tape 1 roll easy fixing
Cover for seal fitting Port plug A Port plug C Earthing device Double fiber cable pressboard 4 Seal tape 1 roll Enlarging diameter of fiber cable which fits in with seal fitting 5 Hanging hook 1 set For aerial use 6 Earthing wire 1 piece Putting through between earthing devices 7 Abrasive cloth 1 piece Scratching fiber cable 8 Labeling paper 1 piece Labeling fiber 9 Special wrench 3 pieces s, tightening nut of reinforced core 10 Measuring paper 1 piece To measure circle, of which its diameter is enlarged with seal tape 11 Buffer tube to be decided by Hitched to fibers and fixed with FOST, customers managing buffer 12 Desiccant 1 bag Put into FOSC before sealing for desiccating air. specification requirement reinforced core Foundation Seal fitting FOSC bottom Shaft Insert plate Single fiber cable pressboard Fixing device for FOST cover Drawing 1 Bolt for insert plate FOSC cover Locating bolt
2.2030mm length of protective coat of fiber cable to be stripped off 1. Fixing length of fiber cable inside FOSC Fiber cable 70mm 3.430mm length of fiber with protective coat 4.1600mm length of protective coat of fiber to be stripped Drawing 2 Temp locating mark Stripping terminal fiber cable Fiber cable Cutter Drawing 3 Adhesive tape Insulation tape Seal tape 5~10mm 10 40mm Reinforced core 25 20 15 Fiber Bunchy/ribbon fiber (with protective coat) Drawing 4 for fiber cable Fiber cable Pressboard Nut for reinforced core Seal fitting Housing Fixing device for fiber cable Drawing 5 Fiber Fixing device for reinforced core
Terminal B fiber with protective coat Fiber with protective coat Fixing device for reinforced core Reinforced core Fiber Double fiber cable pressboard Nylon tie Fixing slot of heat shrinkable protective sleeve (bunchy) Grommet Heat shrinkable protective sleeve Fixing slot of heat shrinkable protective sleeve (Ribbon) Left terminal fiber with protective coat Fiber FOST Right terminal fiber with protective coat Drawing 6 FOST cover FOST Single fiber cable pressboard Seal fitting Terminal A fiber cable Seal tape Insulation tape FOST Grommet Nylon tie Grommet Earthing device Nylon tie Terminal A fiber with protective coat Fixing slot of heat shrinkable protective sleeve Heat shrinkable protective sleeve Drawing 7 Seal tape Terminal B fiber cable Seal fitting Port plug C
cable pressboard Seal fitting Cover of seal fitting Port plug A Port plug C Earthing device Double fiber Pressure testing valve Insert plate Single Fiber cable pressboard Foundation FOSC cover FOSC bottom Insert plate Bolt of insert plate Bolt for insert plate FOST cover Panel FOSC cover (at 4 corners) Earthing deriving device Drawing 8 Locking hole with female thread on insert plate The location to dismantle percussion Port A Port B Port C Fixing slot for hanging hook FOSC bottom