IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs -5 IPT 3181- and IPT 3181-F Protective Receptacle overs -6 IPT 3181-N and IPT 3181-NF Protective Receptacle overs -7 90376-R and 90376-Y Protective Receptacle and Plug Plastic aps -8 IPT 3115 and IPT 3115 ummy Stowage Receptacles -9 10-101949 and 10-101949-S Square Flange Panel Mount Receptacle Sealing Gaskets -10 10-101033-11 and 10-101033-12 Sealing Plug for Wire Sealing Grommet -11 IPT Series Tools / IPT S Series Tools -12 ; -13 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-1
3057- able lamp Mod. ode Options 3057-16 F11 MI-T-26482 Serie I Ø F Ø T II: MOIFITION OS Shell Finish (Omit for Standard ad/olive rab Finish) F6 - lack lectrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - lectroless Nickel (RoHs) M - Marine ronze (RoHs) General duty cable clamp suitable for jacketed cable or wires protected by tubing. T I: IMNSIONS GNIR P/N Shell size Sleeve to use Ø Ø F Thread in inches 3057-3 8 34-3 18 6.8 10.2 0.5000-28UNF.6 3057-4 10 34-4 25 8.2 10.2 0.6250-24UNF 21.0 3057-6 12 34-6 27 11.2 10.2 0.7500 - UNF 22.2 3057-8 14 34-8 28 14.2 10.2 0.8750 - UNF 24.0 3057-10 16 34-10 33 16.0 10.2 1.0000 - UNF 28.5 3057-12 18 34-12 35 19.0 10.2 1.1875-18NF 24.0 3057-12 34-12 35 19.0 10.2 1.1875-18NF 24.0 3057-16 22 34-16 43 23.8 10.5 1.4375-18NF 26.0 3057-16 24 34-16 43 23.8 10.5 1.4375-18NF 26.0 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-2
3057- able lamp Mod. ode Options 3057-12 F11 MI-T-26482 Serie I V Ø F T II: MOIFITION OS Shell Finish (Omit for Standard ad/olive rab Finish) F6 - lack lectrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - lectroless Nickel (RoHs) M - Marine ronze (RoHs) Ø Waterproof cable clamp suitable for jacketed cable or wires protected by tubing. ssures watertight integrity of connector. T I: IMNSIONS GNIR P/N Shell size Sleeve to use Ø Ø F V min. Max. Thread in inches Thread 3057-3 8 34-3.0 0.68 5.56 0.5000-28UNF 33.2 6-32 N 3057-4 10 34-4 22.6 2.38 7.93 0.6250-24UNF 32.3 6-32 N 3057-6 12 34-4 / 6 25.8 5.84 11.12 0.7500 - UNF 32.3 6-32 N 3057-8 14 34-6 / 8 28.1 8.00 13.84 0.8750 - UNF 32.3 6-32 N 3057-10 16 34-6 / 10 31.0 9.60 15.87 1.0000 - UNF 35.3 6-32 N 3057-12 18 34-8 / 12 37.3 11.30 19.00 1.1875-18NF 35.7 8-32 N 3057-12 34-8 / 12 37.3 11.30 19.00 1.1875-18NF 35.7 8-32 N 3057-16 22 34-8 / 12 / 16 42.0 15.50 23.80 1.4375-18NF 38.5 8-32 N 3057-16 24 34-8 / 12 / 16 42.0 15.50 23.80 1.4375-18NF 38.5 8-32 N 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-3
34 and 34- Neoprene Sleeve MI-T-26482 Serie I asic Part Number 34-3 T I: SS MPS GNIR O Ø GNIR P/N ±0.1 ±0.1 ±0.1 ±0.1 34-3 9.5 5.33 3.30 73.0 34-4 12.8 7.67 5.58 69.8 34-6 15.7 10.84 7.92 66.8 34-8 18.8 14:02 11.09 63.5 34-10 22.0 15.62 14.27 60.3 34-12 27.0 18.79 15.87 57.1 34-16 33.3 23:54 19.05 53.9 Ø 34 : Neoprene sleeve for protection and reduction, used with class cable clamps. MI-T-26482 Serie I asic Part Number 34-3 T II: SS MPS GNIR O Ø GNIR P/N ±0.1 ±0.1 ±0.1 34-3 5.30 2.90 50.5 34-4 7.63 5.56 50.5 34-6 10:50 7.93 50.5 34-8 13:50 11.10 50.5 34-10 15.70 11.10 50.5 34-12 18:50 13.74 50.9 34-16 23.60 19.00 50.9 Ø 34- : Neoprene sleeve for protection and reduction, used with class cable clamps. 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-4
IPT 3180- and IPT 3180-F Protective Plug overs MI-T-26482 Serie I asic Part Number anyard Style - hain F - Nylon ord Z2 - Nylon ord IPT 3180-10 F11 1 1 400 + 0.6 9 Ø3.6 Ø4.3 xample: IPT3180-18 (Stainless Steel hain) xample: IPT3180-18F (Nylon ord) xample: IPT3180-18Z2 (Nylon ord with loose terminal link and sleeve) GNIR P/N Shell size +0.02-0.12 +0.2 0 +0.6 0 1 min. IPT3180-8 8 12.01 4.3 14.3 76.2 IPT3180-10 10 14.98 4.3 14.3 76.2 IPT3180-12 12 19.05 4.3 14.3 88.9 IPT3180-14 14 22.22 4.3 14.3 88.9 IPT3180-16 16 25.40 4.3 14.3 88.9 IPT3180-18 18 28.57 4.3 14.3 88.9 IPT3180-31.75 4.3 15.9 101.6 IPT3180-22 22 34.92 4.3 15.9 101.6 IPT3180-24 24 38.10 4.3 15.9 101.6 Metal protective cover for plug connectors with stainless steel chain or nylon cord. T II: MOIFITION OS Shell Finish (Omit for Standard ad/olive rab Finish) F6 - lack lectrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - lectroless Nickel (RoHs) M - Marine ronze (RoHs) 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-5
IPT 3181- and IPT 3181-F Protective Receptacle overs MI-T-26482 Serie I asic Part Number anyard Style - hain F - Nylon ord Z1 - Nylon ord IPT 3181-10 F11 0.6 9 1 1 400 + Ø3.6 Ø4.3 xample: IPT3181-18 (Stainless Steel hain) xample: IPT3181-18F (Nylon ord) xample: IPT3181-18Z1 (Nylon ord with loose terminal link and sleeve) GNIR P/N T I: IMNSIONS Shell size Max. +0.2-0 +0.5-0 1 min. IPT3181-8 8 17.95 4.3 14.30 76.2 IPT3181-10 10 21.05 4.3 14.30 76.2 IPT3181-12 12 25.40 4.3 14.30 88.9 IPT3181-14 14 28.65 4.3 14.30 88.9 IPT3181-16 16 31.90 4.3 14.30 88.9 IPT3181-18 18 35.00 4.3 14.30 88.9 IPT3181-38.00 4.3 14.30 101.6 IPT3181-22 22 41.25 4.3 14.30 101.6 IPT3181-24 24 44.40 4.3 15.55 101.6 Metal protective cover for receptacle connectors with stainless steel chain or nylon cord. T II: MOIFITION OS Shell Finish (Omit for Standard ad/olive rab Finish) F6 - lack lectrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - lectroless Nickel (RoHs) M - Marine ronze (RoHs) 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-6
IPT 3181-N and IPT 3181-NF Protective Jam Nut Receptacle overs MI-T-26482 Serie I anyard Style N - hain NF - Nylon ord IPT 3181-10 N F11 asic Part Number 1 100 + GNIR P/N Shell size xample: IPT3181-18N (Stainless Steel hain) T I: IMNSIONS Max. +0.2-0.1 +0.25-0 1 ±3 IPT3181-8N 8 17.95 14.70 14.30 76.2 IPT3181-10N 10 21.05 17.85 14.30 76.2 IPT3181-12N 12 25.40 22.65 14.30 88.9 IPT3181-14N 14 28.65 25.80 14.30 88.9 IPT3181-16N 16 31.90 29.00 14.30 88.9 IPT3181-18N 18 35.00 32.15 14.30 88.9 IPT3181-N 38.00 35.35 14.30 101.6 IPT3181-22N 22 41.25 38.50 14.30 101.6 IPT3181-24N 24 44.40 41.00 15.55 101.6 xample: IPT3181-18NF (Nylon ord) Metal protective cover for jam nut receptacle connectors with stainless steel chain or nylon cord. T II: MOIFITION OS Shell Finish (Omit for Standard ad/olive rab Finish) F6 - lack lectrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - lectroless Nickel (RoHs) M - Marine ronze (RoHs) 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-7
90376-R and 90376-Y Protective Receptacle and Plug Plastic aps MI-T-26482 Serie I asic Part Number 90376-10R Ø Ø GNIR P/N GNIR P/N Shell size 90376-24R Receptacle 24 37.16 38.93 43.18 T II: PUG P IMNSIONS Shell size Ø T I: RPT P IMNSIONS Ø ±0.25 Ø ±0.25 Ø ±0.25 Ø ±0.25 Ø ±0.78 90376-8R Receptacle 8 12.19 13.71 18.79 90376-10R Receptacle 10 15.36 16.89 21.33 90376-14Y Receptacle 12 18.28 19.68 24.63 90376-16Y Receptacle 14 21.59 22.98 28.57 90376-18Y Receptacle 16 24.71 26.28 30.98 90376-Y Receptacle 18 27.76 29.33 33.78 90376-22Y Receptacle 31.26 33.04 37.21 90376-24Y Receptacle 22 34.03 35.81 40.38 Ø ±0.78 90376-8Y Plug 8 10.49 12.26 17.01 90376-8R Plug 10 13.46 15.11 19.05 90376-12Y Plug 12 16.63 18.16 21.84 90376-12R Plug 14 19.93 21.46 26.18 90376-16Y Plug 16 22.68 24.46 28.57 90376-16R Plug 18 26.11 27.63 31.75 90376-18R Plug 29.21 30.86 35.71 90376-R Plug 22 32.25 34.03 38.10 90376-22R Plug 24 35.30 37.08 41.65 Plastic caps for protection against dust and damage. 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-8
IPT 3115 and IPT 3115 ummy Stowage Receptacles MI-T-26482 Serie I asic Part Number ØM H IPT 3115-10 F11 IPT3115 : ummy receptacle with rear base and seal. In conformity with MI-T-26482 Serie I. G MI-T-26482 Serie I asic Part Number ØM H IPT 3115-10 F11 IPT3115 : ummy receptacle without rear base and seal. G Shell size +0.02-0.12 +0.25-0 T I G ±0.4 H ±0.1 +0.6-0.25 ØM +0.1 0 8 12.01 10.95.6 15.10 12.5 3.04 10 14.98 10.95 23.8 18.25 12.5 3.04 12 19.05 10.95 26.2.60 12.5 3.04 14 22.22 10.95 28.6 23.00 12.5 3.04 16 25.40 10.95 31.0 24.60 12.5 3.04 18 28.57 10.95 33.3 27.00 12.5 3.04 31.75 14.10 36.5 29.35 16.5 3.04 22 34.92 14.10 39.7 31.75 16.5 3.04 24 38.10 15.00 42.8 34.92 17.3 3.73 T II: MOIFITION OS Shell Finish (Omit for Standard ad/olive rab Finish) F6 - lack lectrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - lectroless Nickel (RoHs) M - Marine ronze (RoHs) 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-9
Sealing Plug for Wire Sealing Grommet asic Part Number 10-101033 Ø GNIR P/N ontact size T I ±0.13 ±0.25 Ø ±0.13 olor 10-101033-11 2.92 9.53 2.92 Red 10-101033-12 16 3.17 11.91 3.68 lue 10-101033-13 12 4.60 3.70 3. Yellow 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-11
GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy -12 IPT Series Tools * Use together as alternative. IPT RIMP TOOS - PIN ONTTS Type of contact Size Ø Ø Ø onductor Size mm 2 WG MNU TOO *PNUMTI TOO TYP TURRT INSRTION TOO XTRTION TOO 10-374- S 8 18,4 1 1,3 1,93 0,2 0,5 22 24 M. 105001 M225.1.01 F8 M M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 117346 GNIR TOO M. 118251 GNIR TOO 10-375- 24 24,3 1 1,3 1,93 0,2 0,5 22 24 M. 105001 M225.1.01 F8 M M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 117346 GNIR TOO M. 118251 GNIR TOO 10-374-16 16S 8 18 22,3 1,57 1,72 2,6 0,5 1 16 18 M. 105001 M225.1.01 F8 M M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 117083 GNIR TOO M. 118251 GNIR TOO 10-375-16 16 24 24,3 1,57 1,72 2,6 0,2 0,5 16 18 M. 105001 M225.1.01 F8 M M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 117083 GNIR TOO M. 118251 GNIR TOO 10-373-12S 12S 8 18 22,5 2,38 2,5 3,8 2,5 3 14 12 M. 105001 M225.1.01 F8 M M. 105003 W27F M M. 105012 M225/1.05 M. 117082 GNIR TOO M. 118250 GNIR TOO 10-373-12 12 8 18 26,3 2,38 2,5 3,8 2,5 3 14 12 M. 105001 M225.1.01 F8 M M. 105003 W27F M M. 105012 M225/1.05 M. 117082 GNIR TOO M. 118250 GNIR TOO U.S. G ode 06324-14 GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912 10 Glenair, Inc. Printed in U.S.. U.S. G ode 06324 06 Glenair, Inc. Printed in U.S.. T I: PIN RIMP ONTT P U.S. G ode 06324 06 Glenair, Inc. Printed in U.S.. T I: PIN RIMP ONTT P ontacts - Page 9 Manual rimp Tool Manual rimp Tool Pneumatic rimp Tool Type Pneumatic rimp Tool Type 10-40553-12 10-40553-13 16S 10-40553-15 16S 0,75-1,0 10-40553- 16S 1-2 14 10-40553-26 16S 3 12 M.105007 10-40557 16 1 1,5 18 16 M.105007 M.105009 10-40557-08 16 0,15 0,2 26 24 M.105001 M.105009 M.105003 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105 10-40557-13 16 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32 28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1 2 18 14 M.105007 M.105009 M.105002 M.105009 10-40561-50 12 10 / M.105007 M.105009 M.105002 M.105009 10-40561-58 12 13,2 6 M.105007 M.105009 M.105002 M.105009 10-40553-15 10-40553- 16S 10-40553-26 16S 3 10-40557 16 1-1,5 18-16 M 10-40557-08 16 0,15-0,2 26-24 M.105001 M 10-40557-12 16 0,6 M.105001 M.105009 10-40557-13 16 0,15-0,6 26- M.105001 M.105009 M.105003 10-40557-15 16 0,75-1,0 18 M.105007 M.105009 M.105002 M.10500 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32-28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1-2 18-14 M.105007 M.105009 M.105002 M.105009 U.S. G ode 06324-12 N, 911-2497 818-247-6000 FX 818-500-9912 Printed in U.S.. U.S. G ode 06324 Printed in U.S.. se consult our sales department for other contact options or crimp tooling details. NUMRS, SIZ & IMNSIONS U.S. G ode 06324 Printed in U.S.. se consult our sales department for other contacts or crimp tooling details. NUMRS, SIZ & IMNSIONS TOO ommital P/N M.118251 M.125007 M.118249 M.125000 345 M.118250 M.125001.117345 M.118250 M.118250 M.117345 M.118250 M.118250 M.117346 M.118250 M.125001 4 12 M.117082 M.118250 M.125001 18 16 18 16 2 26 24 M.117346 M.118250 M.125001 0,6 0,15 0,6 26 M.117346 M.118250 M.125001 0,75-1 18 1-2 14 16 3 12 M.117082 M.118250 M.125001 16 / 32 28 60-12 12 0,6 M.117345 M.118250 M.125002-40560-15 12 0,75-1 18 10-40560- 12 1 2 18 14 10-40560-22 12 2,5 / 10-40560-30 12 4-5 / 10-40560-30M 12 4 / 10-40560-38 12 6 10 10-40560-50 12 10 / / / / 40560-58 12 13,2 6 / / / GUI PIN ontacts - Page 7 Tool Removal Tool NSIONS TOO ommital P/N M.118251 M.125007 M.118249 M.125000 45 M.118250 M.125001 117345 M.118250 M.118250 M.117345 M.118250 M.118250 M.117346 M.118250 M.125001 12 M.117082 M.118250 M.125001 18-16 18-16 26-24 M.117346 M.118250 M.125001,6 0,15-0,6 26- M.117346 M.118250 M.125001 0,75-1 18 1-2 14 16 3 12 M.117082 M.118250 M.125001 16 / 32-28 0-12 12 0,6 M.117345 M.118250 M.125002 40560-15 12 0,75-1 18 10-40560- 12 1-2 18-14 10-40560-22 12 2,5 / 10-40560-30 12 4-5 / 10-40560-30M 12 4 / 10-40560-38 12 6 10 10-40560-50 12 10 / M.117344 M.118250 M.125002-40560-58 12 13,2 6 M.117344 M.118250 M.125002 GUI PIN U.S. G ode 06324-12 GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912 10 Glenair, Inc. Printed in U U.S. G ode 06324 -Mail: sales@glenair.c 06 Glenair, Inc. Printed *Please consult our sales department for other contact options or crimp tooling d U.S. G ode 06324 -Mail: sales@glenair.co 06 Glenair, Inc. Printed in ON 1 1-2 3 1 16 1 1,5 18 1 16 1 1,5 18 16 16 0,15 0,2 26 24-12 16 0,6-40556-13 16 0,15 0,6 26 10-40556-15 16 0,75-1 18 10-40556- 16 1-2 14 10-40556-26 16 3 12 10-40556-32 16 / 32 28 M. 10-40560 12 2,5-3,0 12 M.11 10-40560 TU 12 2,5-3,0 12 M.1170 10-40560-12 12 0,6 M.117345 10-40560-15 12 0,75-1 18 M.117082 10-40560- 12 1 2 18 14 M.117082 10-40560-22 12 2,5 / M.117082 10-40560-30 12 4-5 / M.117082 10-40560-30M 12 4 / M.117082 10-40560-38 12 6 10 M.117082 10-40560-50 12 10 / / 10-40560-58 12 13,2 6 / ontacts - Page 7 Insertion Tool Removal Tool Please consult our sales department for other contact options or crimp too 1-2 3 1-1,5 18 16 1-1,5 18-1 16 0,15-0,2 26-24 2 16 0,6 0556-13 16 0,15-0,6 26-10-40556-15 16 0,75-1 18 10-40556- 16 1-2 14 10-40556-26 16 3 12 10-40556-32 16 / 32-28 10-40560 12 2,5-3,0 12 M 10-40560 TU 12 2,5-3,0 12 M.1 10-40560-12 12 0,6 M.117 10-40560-15 12 0,75-1 18 M.11708 10-40560- 12 1-2 18-14 M.117082 10-40560-22 12 2,5 / M.117082 10-40560-30 12 4-5 / M.117082 10-40560-30M 12 4 / M.117082 10-40560-38 12 6 10 M.117082 10-40560-50 12 10 / M.117344 10-40560-58 12 13,2 6 M.117344 M U.S. G ode 06324-14 GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912 10 Glenair, Inc. Printed in U.S.. U.S. G ode 06324 06 Glenair, Inc. Printed in U.S.. T I: PIN RIMP ONTT PRT NUMRS, SIZ & IMNSIONS U.S. G ode 06324 06 Glenair, Inc. Printed in U.S.. T I: PIN RIMP ONTT PRT NUMRS, SIZ & IMNSIONS ontacts - Page 9 Manual rimp Tool Manual rimp Tool Pneumatic rimp Tool Type Pneumatic rimp Tool Type 10-375- 10-40579 18 0,15 0,6 26 M.105001 M.105025 M. 10-40553 16S 1 1,5 18 16 M.105007 M.105009 M.105002 M.105009 10-40553-12 16S 0.6 M.105007 M.105009 M.105002 M.105009 10-40553-13 16S 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40553- 16S 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557 16 1 1,5 18 16 M.105007 M.105009 M.105002 M.105009 10-40557-08 16 0,15 0,2 26 24 M.105001 M.105009 M.105003 M.105009 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32 28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1 2 18 14 M.105007 M.105009 M.105002 M.105009 10-40561-50 12 10 / M.105007 M.105009 M.105002 M.105009 10-40561-58 12 13,2 6 M.105007 M.105009 M.105002 M.105009 10-40553-12 16S 0.6 10-40553-13 16S 0,15-0,6 26- M.105001 M.105009 M.105003 M.10 10-40553- 16S 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557 16 1-1,5 18-16 M.105007 M.105009 M.105002 M.105009 10-40557-08 16 0,15-0,2 26-24 M.105001 M.105009 M.105003 M.105009 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15-0,6 26- M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32-28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1-2 18-14 M.105007 M.105009 M.105002 M.105009 O IPT RIMP TOOS - SOKT ONTTS Type of contact Size Ø Ø Ø onductor Size mm 2 WG MNU TOO *PNUMTI TOO TYP TURRT INSRTION TOO XTRTION TOO GUI PIN 10-571- S 8 18,4 1,08 1,3 1,93 0,2-0,5 22 24 M. 105001 M225.1.0 1F8 M M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 117346 GNIR TOO M. 118251 GNIR TOO M. 125007 GNIR TOO 10-573- 24 24,3 1,08 1,3 1,93 0,2-0,5 22 24 M. 105001 M225.1.0 1F8 M M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 117346 GNIR TOO M. 118251 GNIR TOO M. 125007 GNIR TOO 10-571-16 16S 8 18 22,3 1,07 1,72 2,6 0,5 1 16 18 M. 105001 M225.1.0 1F8 M M. 105003 W27F M M. 105001 M225/1.02 M TH1 (or VH441 M) M. 117083 GNIR TOO M. 118251 GNIR TOO M. 125001 GNIR TOO 10-573-16 16 24 24,3 1,07 1,72 2,6 0,5-1 16 18 M. 105001 M225.1.0 1F8 M M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 117083 GNIR TOO M. 118251 GNIR TOO M. 125001 GNIR TOO 10-576-12S 12S 8 18 21,45 2,48 2,5 3,8 2,5 3 14 12 M. 105001 M225.1.01 F8 M M. 105003 W27F M M. 105012 M225/1.05 M. 117082 GNIR TOO M. 118250 GNIR TOO M. 125002 GNIR TOO 10-576-12 12 8 18 25,4 2,48 2,5 3,8 2,5 3 14 12 M. 105001 M225.1.01 F8 M M. 105003 W27F M M. 105012 M225/1.05 M. 117082 GNIR TOO M. 118250 GNIR TOO M. 125002 GNIR TOO 818-247-6000 FX 818-500-9912 Printed in U.S.. Printed in U.S.. tact options or crimp tooling details. ONTT PRT NUMRS, SIZ & IMNSIONS Printed in U.S.. tacts or crimp tooling details. T PRT NUMRS, SIZ & IMNSIONS l Tools INSRTION TOO RMOV TOO WG ommital P/N ommital P/N 26 M.117346 M.118251 M.125007 26 M.117346 M.118249 M.125000 18 16 18 16 M.117345 M.118250 M.118250 M.117345 M.118250 M.118250 26 M.117346 M.118250 M.125001 18 14 12 M.117082 M.118250 M.125001 16 16 4 M.117346 M.118250 M.125001 M.117346 M.118250 M.125001 M.117082 M.118250 M.125001 M.117345 M.118250 M.125002 / / / / / / IZ GUI PIN act options or crimp tooling details. V TOOS PRT NUMRS, SIZ & IMNSIONS INSRTION TOO RMOV TOO WG ommital P/N ommital P/N 26- M.117346 M.118251 M.125007 26- M.117346 M.118249 M.125000 18-16 18-16 M.117345 M.118250 M.118250 M.117345 M.118250 M.118250 26- M.117346 M.118250 M.125001 18 14 12 M.117082 M.118250 M.125001 8-16 8-16 -24 M.117346 M.118250 M.125001 0 0 M.117346 M.118250 M.125001 M.117082 M.118250 M.125001 M.117345 M.118250 M.125002 M.117344 M.118250 M.125002 M.117344 M.118250 M.125002 SIZ GUI PIN U.S. G ode 06324 ontacts and Tools -14 GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912 10 Glenair, Inc. Printed in U.S.. S ayonet ssemblies Pin rimp ontacts Manual and Pneumatic Tools U.S. G ode 06324 Reverse ayonet ssemblies 06 Glenair, Inc. Printed in U.S.. S ayonet ssemblies Pin rimp ontacts T I: PIN RIMP ONTT PRT NUMRS, SIZ & IMNSIONS U.S. G ode 06324 Reverse ayonet ssemblies 06 Glenair, Inc. Printed in U.S.. S ayonet ssemblies Pin rimp ontacts T I: PIN RIMP ONTT PRT NUMRS, SIZ & IMNSIONS Manual and Pneumatic Tools ontacts - Page 9 Manual rimp Tool Manual rimp Tool Pneumatic rimp Tool Type Pneumatic rimp Tool Type mm 2 WG MNU TOO TURRT PNUMTI TOO TURRT 10-375- 0,15-0,6 26 M.105001 M.105026 M.105003 M.105026 10-40579 18 0,15 0,6 26 M.105001 M.105025 M.105003 M.105025 10-40553 16S 1 1,5 18 16 M.105007 M.105009 M.105002 M.105009 10-40553-12 16S 0.6 M.105007 M.105009 M.105002 M.105009 10-40553-13 16S 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40553- 16S 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557 16 1 1,5 18 16 M.105007 M.105009 M.105002 M.105009 10-40557-08 16 0,15 0,2 26 24 M.105001 M.105009 M.105003 M.105009 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32 28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1 2 18 14 M.105007 M.105009 M.105002 M.105009 10-40561-50 12 10 / M.105007 M.105009 M.105002 M.105009 10-40561-58 12 13,2 6 M.105007 M.105009 M.105002 M.105009 PNUMTI TOO TYP "" PRT NUMR WIR SIZ ONTT SIZ MNU RIMP TOO T I: MNU N PNUMTI TOOS PRT NUMRS, SIZ & IMNSIONS mm 2 WG MNU TOO TURRT PNUMTI TOO TURRT 10-375- 0,15-0,6 26- M.105001 M.105026 M.105003 M.105026 10-40579 18 0,15-0,6 26- M.105001 M.105025 M.105003 M.105025 10-40553 16S 1-1,5 18-16 M.105007 M.105009 M.105002 M.105009 10-40553-12 16S 0.6 M.105007 M.105009 M.105002 M.105009 10-40553-13 16S 0,15-0,6 26- M.105001 M.105009 M.105003 M.105009 10-40553- 16S 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557 16 1-1,5 18-16 M.105007 M.105009 M.105002 M.105009 10-40557-08 16 0,15-0,2 26-24 M.105001 M.105009 M.105003 M.105009 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15-0,6 26- M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32-28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1-2 18-14 M.105007 M.105009 M.105002 M.105009 PNUMTI TOO TYP "" PRT NUMR WIR SIZ ONTT SIZ MNU RIMP TOO U.S. G ode 06324 ontacts and Tools -12 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912. Printed in U.S.. S ayonet ssemblies Socket rimp ontacts Insertion and Removal tools U.S. G ode 06324 Reverse ayonet ssemblies Inc. Printed in U.S.. S ayonet ssemblies Socket rimp ontacts * T I: SOKT RIMP ONTT PRT NUMRS, SIZ & IMNSIONS U.S. G ode 06324 Reverse ayonet ssemblies c. Printed in U.S.. S ayonet ssemblies Pin rimp ontacts T I: PIN RIMP ONTT PRT NUMRS, SIZ & IMNSIONS Insertion and Removal Tools INSRTION TOO RMOV TOO mm 2 WG ommital P/N ommital P/N 10-405 0,15 0,6 26 M.117346 M.118251 M.125007 10-40588 18 0,15 0,6 26 M.117346 M.118249 M.125000 10-40552 16S 1 1,5 18 16 10-40552 TU 16S 1 1,5 18 16 M.117345 M.118250 M.118250 10-40552-12 16S 0,6 M.117345 M.118250 M.118250 10-40552-13 16S 0,15 0,6 26 M.117346 M.118250 M.125001 10-40552-15 16S 0,75-1 18 10-40552- 16S 1-2 14 10-40552-26 16S 3 12 M.117082 M.118250 M.125001 10-40556 16 1 1,5 18 16 10-40556 TU 16 1 1,5 18 16 10-40556-08 16 0,15 0,2 26 24 M.117346 M.118250 M.125001 10-40556-12 16 0,6 10-40556-13 16 0,15 0,6 26 M.117346 M.118250 M.125001 10-40556-15 16 0,75-1 18 10-40556- 16 1-2 14 10-40556-26 16 3 12 M.117082 M.118250 M.125001 10-40556-32 16 / 32 28 10-40560 10-40560 TU 10-40560-12 12 0,6 M.117345 M.118250 M.125002 10-40560-15 12 0,75-1 18 10-40560- 12 1 2 18 14 10-40560-22 12 2,5 / 10-40560-30 12 4-5 / 10-40560-30M 12 4 / 10-40560-38 12 6 10 10-40560-50 12 10 / / / / 10-40560-58 12 13,2 6 / / / PRT NUMR ONTT SIZ WIR SIZ GUI PIN ontacts - Page 7 Insertion Tool Removal Tool T I: INSRTION N RMOV TOOS PRT NUMRS, SIZ & IMNSIONS INSRTION TOO RMOV TOO mm 2 WG ommital P/N ommital P/N 10-405 0,15-0,6 26- M.117346 M.118251 M.125007 10-40588 18 0,15-0,6 26- M.117346 M.118249 M.125000 10-40552 16S 1-1,5 18-16 10-40552 TU 16S 1-1,5 18-16 M.117345 M.118250 M.118250 10-40552-12 16S 0,6 M.117345 M.118250 M.118250 10-40552-13 16S 0,15-0,6 26- M.117346 M.118250 M.125001 10-40552-15 16S 0,75-1 18 10-40552- 16S 1-2 14 10-40552-26 16S 3 12 M.117082 M.118250 M.125001 10-40556 16 1-1,5 18-16 10-40556 TU 16 1-1,5 18-16 10-40556-08 16 0,15-0,2 26-24 M.117346 M.118250 M.125001 10-40556-12 16 0,6 10-40556-13 16 0,15-0,6 26- M.117346 M.118250 M.125001 10-40556-15 16 0,75-1 18 10-40556- 16 1-2 14 10-40556-26 16 3 12 M.117082 M.118250 M.125001 10-40556-32 16 / 32-28 10-40560 10-40560 TU 10-40560-12 12 0,6 M.117345 M.118250 M.125002 10-40560-15 12 0,75-1 18 10-40560- 12 1-2 18-14 10-40560-22 12 2,5 / 10-40560-30 12 4-5 / 10-40560-30M 12 4 / 10-40560-38 12 6 10 10-40560-50 12 10 / M.117344 M.118250 M.125002 10-40560-58 12 13,2 6 M.117344 M.118250 M.125002 PRT NUMR ONTT SIZ WIR SIZ GUI PIN U.S. G ode 06324 ontacts and Tools -12 GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912 10 Glenair, Inc. Printed in U.S.. U.S. G ode 06324 Reverse ayonet ssemblies 06 Glenair, Inc. Printed in U.S.. * T I: SOKT RIMP ONTT PR U.S. G ode 06324 Reverse ayonet ssemblies 06 Glenair, Inc. Printed in U.S.. T I: PIN RIMP ONTT PRT NUM mm 2 WG 10-405 0,15 0,6 26 10-40588 18 0,15 0,6 26 10-40552 16S 1 1,5 18 16 10-40552 TU 16S 1 1,5 18 16 10-40552-12 16S 0,6 M 10-40552-13 16S 0,15 0,6 26 M.11 10-40552-15 16S 0,75-1 18 M.1173 10-40552- 16S 1-2 14 M.117345 10-40552-26 16S 3 12 M.117082 10-40556 16 1 1,5 18 16 M.117345 10-40556 TU 16 1 1,5 18 16 M.117345 10-40556-08 16 0,15 0,2 26 24 M.117346 10-40556-12 16 0,6 M.117345 10-40556-13 16 0,15 0,6 26 M.117346 10-40556-15 16 0,75-1 18 M.117345 M. 10-40556- 16 1-2 14 M.117345 M.11 10-40556-26 16 3 12 M.117082 M.1182 10-40556-32 16 / 32 28 M.117345 M.118250 10-40560 12 2,5-3,0 12 M.117082 M.118250 10-40560 TU 12 2,5-3,0 12 M.117082 M.118250 10-40560-12 12 0,6 M.117345 M.118250 10-40560-15 12 0,75-1 18 M.117082 M.118250 10-40560- 12 1 2 18 14 M.117082 M.118250 10-40560-22 12 2,5 / M.117082 M.118250 10-40560-30 12 4-5 / M.117082 M.118250 M. 10-40560-30M 12 4 / M.117082 M.118250 M.12 10-40560-38 12 6 10 M.117082 M.118250 M.1250 10-40560-50 12 10 / / / / 10-40560-58 12 13,2 6 / / / PRT NUMR ONTT SIZ WIR SIZ ontacts - Page 7 Insertion Tool Removal Tool T I: INSRTION N RMOV mm 2 WG 10-405 0,15-0,6 26-10-40588 18 0,15-0,6 26-10-40552 16S 1-1,5 18-16 10-40552 TU 16S 1-1,5 18-16 10-40552-12 16S 0,6 10-40552-13 16S 0,15-0,6 26- M 10-40552-15 16S 0,75-1 18 M.1 10-40552- 16S 1-2 14 M.117 10-40552-26 16S 3 12 M.11708 10-40556 16 1-1,5 18-16 M.117345 10-40556 TU 16 1-1,5 18-16 M.117345 10-40556-08 16 0,15-0,2 26-24 M.117346 10-40556-12 16 0,6 M.117345 10-40556-13 16 0,15-0,6 26- M.117346 10-40556-15 16 0,75-1 18 M.117345 10-40556- 16 1-2 14 M.117345 M 10-40556-26 16 3 12 M.117082 M.1 10-40556-32 16 / 32-28 M.117345 M.118 10-40560 12 2,5-3,0 12 M.117082 M.11825 10-40560 TU 12 2,5-3,0 12 M.117082 M.118250 10-40560-12 12 0,6 M.117345 M.118250 10-40560-15 12 0,75-1 18 M.117082 M.118250 10-40560- 12 1-2 18-14 M.117082 M.118250 10-40560-22 12 2,5 / M.117082 M.118250 10-40560-30 12 4-5 / M.117082 M.118250 10-40560-30M 12 4 / M.117082 M.118250 M 10-40560-38 12 6 10 M.117082 M.118250 M.1 10-40560-50 12 10 / M.117344 M.118250 M.125 10-40560-58 12 13,2 6 M.117344 M.118250 M.12500 PRT NUMR ONTT SIZ WIR SIZ U.S. G ode 06324 ontacts and Tools -14 GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912 10 Glenair, Inc. Printed in U.S.. S ayonet ssemblies Pin rimp ontacts Manual and Pneumatic Tools U.S. G ode 06324 Reverse ayonet ssemblies 06 Glenair, Inc. Printed in U.S.. S ayonet ssemblies Pin rimp ontacts T I: PIN RIMP ONTT PRT NUMRS, SIZ & IMNSIONS U.S. G ode 06324 Reverse ayonet ssemblies 06 Glenair, Inc. Printed in U.S.. S ayonet ssemblies Pin rimp ontacts T I: PIN RIMP ONTT PRT NUMRS, SIZ & IMNSIONS Manual and Pneumatic Tools ontacts - Page 9 Manual rimp Tool Manual rimp Tool Pneumatic rimp Tool Type Pneumatic rimp Tool Type mm 2 WG MNU TOO TURRT PNUMTI TOO TURRT 10-375- 0,15-0,6 26 M.105001 M.105026 M.105003 M.105026 10-40579 18 0,15 0,6 26 M.105001 M.105025 M.105003 M.105025 10-40553 16S 1 1,5 18 16 M.105007 M.105009 M.105002 M.105009 10-40553-12 16S 0.6 M.105007 M.105009 M.105002 M.105009 10-40553-13 16S 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40553- 16S 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557 16 1 1,5 18 16 M.105007 M.105009 M.105002 M.105009 10-40557-08 16 0,15 0,2 26 24 M.105001 M.105009 M.105003 M.105009 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32 28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1 2 18 14 M.105007 M.105009 M.105002 M.105009 10-40561-50 12 10 / M.105007 M.105009 M.105002 M.105009 10-40561-58 12 13,2 6 M.105007 M.105009 M.105002 M.105009 PNUMTI TOO TYP "" PRT NUMR WIR SIZ ONTT SIZ MNU RIMP TOO T I: MNU N PNUMTI TOOS PRT NUMRS, SIZ & IMNSIONS mm 2 WG MNU TOO TURRT PNUMTI TOO TURRT 10-375- 0,15-0,6 26- M.105001 M.105026 M.105003 M.105026 10-40579 18 0,15-0,6 26- M.105001 M.105025 M.105003 M.105025 10-40553 16S 1-1,5 18-16 M.105007 M.105009 M.105002 M.105009 10-40553-12 16S 0.6 M.105007 M.105009 M.105002 M.105009 10-40553-13 16S 0,15-0,6 26- M.105001 M.105009 M.105003 M.105009 10-40553- 16S 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557 16 1-1,5 18-16 M.105007 M.105009 M.105002 M.105009 10-40557-08 16 0,15-0,2 26-24 M.105001 M.105009 M.105003 M.105009 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15-0,6 26- M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32-28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1-2 18-14 M.105007 M.105009 M.105002 M.105009 PNUMTI TOO TYP "" PRT NUMR WIR SIZ ONTT SIZ MNU RIMP TOO
Type of contact onductor Size 10-314980-P 0,2-0,5 2 2 24 10-314980-S 0,2-0,5 22 24 16 10-314980-16S 16 0,5 1 18 16 10-314980-16P 16 0,5 1 18 * Use together as alternative. 10-40553-15 IPT S Series Tools IPT-S RIMP TOOS - PIN N SOKT ONTTS mm 2 WG MNU T OO 10-40553-12 10-40553-13 16S 10-40553- 16S 10-375- 0, 10-40553-12 16S 0.6 10-40553-15 16S 0,75-1,0 10-40553-26 16S 3 M. 105001 M. 105001 M. 105001 M. 105001 T I: PIN RIMP ONTT PR 10-40553- 16S 1-2 14 M 10-40557 16 1-1,5 18-16 M.1 10-40553-26 16S 3 12 M.105007 M 10-40557-08 16 0,15-0,2 26-24 M.105001 M.1 10-40557 16 1 1,5 18 16 M.105007 M.105009 10-40557-12 16 0,6 M.105001 M.105009 10-40557-08 16 0,15 0,2 26 24 M.105001 M.105009 M.105003 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15-0,6 26- M.105001 M.105009 M.105003 10-40557-13 16 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32-28 M.105001 M.105009 M.105003 M.105009 10-40557-32 16 / 32 28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1 2 18 14 M.105007 M.105009 M.105002 M.105009 10-40561- 12 1-2 18-14 M.105007 M.105009 M.105002 M.105009 10-40561-50 12 10 / M.105007 M.105009 M.105002 M.105009 10-40561-58 12 13,2 6 M.105007 M.105009 M.105002 M.105009 Please consult our sales department for other contacts or crimp tooling Pneumatic details. rimp Tool Type Manual rimp Tool Pneumatic rimp Tool Manual rimp Tool Type M225.1.01 F8 M M225.1.01 F8 M M225.1.01 F8 M M225.1.01 F8 M 45 M.118250 M.125001 M.125000 M.118249 M.125007 M.118251 TOO 10-40579 18 0,15 0,6 26 M.105001 M.105025 M.105003 10-40553-13 16S 0,15-0,6 26- M.105001 M.105009 M.105003 M.105009 10-40553 16S 1 1,5 18 16 M.105007 M.105009 M.105002 M.105009 10-40553-12 16S 0.6 M.105007 M.105009 M.105002 M.105009 10-40553- 16S 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40553-13 16S 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 T I: PIN RIMP ONTT PRT NUMRS, SIZ & IMNSIONS 10-40553- 16S 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557 16 1-1,5 18-16 M.105007 M.105009 M.105002 M.105009 10-40557-08 16 0,15-0,2 26-24 M.105001 M.105009 M.105003 M.105009 10-40557 16 1 1,5 18 16 M.105007 M.105009 M.105002 M.105009 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-08 16 0,15 0,2 26 24 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15-0,6 26- M.105001 M.105009 M.105003 M.105009 10-40557-12 16 0,6 M.105001 M.105009 M.105003 M.105009 10-40557-13 16 0,15 0,6 26 M.105001 M.105009 M.105003 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557- 16 1-2 14 M.105007 M.105009 M.105002 M.105009 10-40557-32 16 / 32-28 M.105001 M.105009 M.105003 M.105009 10-40557-32 16 / 32 28 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561-12 12 0,6 M.105001 M.105009 M.105003 M.105009 10-40561- 12 1-2 18-14 M.105007 M.105009 M.105002 M.105009 10-40561- 12 1 2 18 14 M.105007 M.105009 M.105002 M.105009 10-40561-50 12 10 / M.105007 M.105009 M.105002 M.105009 10-40561-58 12 13,2 6 M.105007 M.105009 M.105002 M.105009 *PNUMTI TOO TYP M. 105003 W27F M Please consult our sales department for other contacts or crimp tooling Pneumatic details. rimp Tool Type Manual rimp Tool Pneumatic rimp Tool Manual rimp Tool Type -14 TURRT INSRTION TOO XTRTION TOO M225/1.02 06 Glenair, Inc. U.S. G ode 06324 Printed in U.S.. 06 Glenair, Inc. U.S. G ode 06324 Printed in U.S.. M TH1 ontacts - Page 9 ontacts - Page 9 10 Glenair, Inc. U.S. G ode 06324 Printed in U.S.. (or VH441 M) 10 Glenair, Inc. U.S. G ode 06324 Printed in U.S.. GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-14 GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912 M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) M. 105003 W27F M M225/1.02 M TH1 (or VH441 M) ontacts - Page 7 sales@glenair.com sales@glenair.com -Mail: -Mail: l Tool Removal onsult our sales department for other contacts or crimp tooling details. details. tooling crimp or options contact other for department sales our onsult M. 117349 M. 117349 M. 117350 M. 117350 GNIR TOO GNIR TOO GNIR TOO GNIR TOO M. 118290 M. 118290 M. 118291 M. 118291 GNIR TOO GNIR TOO GNIR TOO GNIR TOO NUMRS, SIZ & IMNSIONS T NUMRS, SIZ & IMNSIONS -40560-15 12 0,75-1 18 4 0-40560-15 12 0,75-1 18 0,6.117345 M.118250 M.118250 14,2 26 24 M.117346 M.118250 M.125001 TOO 345 M.118250 M.125001 ommital P/N 0,6.117345 M.118250 M.118250 0,15 0,6 26 M.117346 M.118250 M.125001 M.117345 M.118250 M.118250 12 M.117082 M.118250 M.125001 M.118251 M.125007 18 16 M.117346 M.118250 M.125001 0,75-1 18 M.118249 M.125000 18 16 1-2 14 U NSIONS 0-12 12 0,6 M.117345 M.118250 M.125002 60-12 12 0,6 M.117345 M.118250 M.125002 ommital P/N 16 3 12 M.117082 M.118250 M.125001 10-40560- 12 1-2 18-14 0,15-0,6 26- M.117346 M.118250 M.125001 M.117345 M.118250 M.118250 16 3 12 M.117082 M.118250 M.125001 12 M.117082 M.118250 M.125001 10-40560- 12 1 2 18 14 18-16 16 / 32-28 10-40560-22 12 2,5 / M.117346 M.118250 M.125001 0,75-1 18 16 / 32 28 10-40560-22 12 2,5 / 18-16 10-40560-30 12 4-5 / 10-40560-30 12 4-5 / 1-2 14 26-24 M.117346 M.118250 M.125001 10-40560-30M 12 4 / 10-40560-30M 12 4 / GUI PIN GUI PIN 1-2 3 1-1,5 1 16 1-1,5 18-16 0,15-0,2 26-24 2 16 0,6 0556-13 16 0,15-0,6 26-10-40556-15 16 0,75-1 18 10-40556- 16 1-2 14 10-40556-26 16 3 12 10-40556-32 16 / 32-28 10-40560 12 2,5-3,0 12 M 10-40560 TU 12 2,5-3,0 12 M.1 10-40560-12 12 0,6 M.117 10-40560-15 12 0,75-1 18 M.11708 10-40560- 12 1-2 18-14 M.117082 10-40560-22 12 2,5 / M.117082 10-40560-30 12 4-5 / M.117082 10-40560-30M 12 4 / M.117082 10-40560-38 12 6 10 M.117082 10-40560-50 12 10 / M.117344 10-40560-58 12 13,2 6 M.117344 M *Please Please consult consult our our sales sales department department for for other other contact contacts options or crimp or tooling crimp tooling details. d Insertion Tool Removal Tool -Mail: -Mail: sales@glenair.co ontacts - Page 7 10 06 06 Glenair, Glenair, Glenair, Inc. Inc. Inc. U.S. U.S. U.S. G G G ode ode ode 06324 06324 06324 Printed Printed Printed in GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-12 0-40560-38 12 6 10-40560-38 12 6 10 0560-50 12 10 / M.117344 M.118250 M.125002 560-50 12 10 / / / / 0-58 12 13,2 6 M.117344 M.118250 M.125002-58 12 13,2 6 / / / G ode 06324 U.S. G ode 06324 U.S. G ode 06324 U.S. 911-2497 818-247-6000 FX 818-500-9912, -12 U.S.. Printed in U.S.. Printed in U.S.. Printed 6-12 16-1 1-2 3 16 1 1,5 16 1 1,5 16 0,15 0,2 18 16 26 24 0,6 18 1 0-40556-13 16 0,15 0,6 26 10-40556-15 16 0,75-1 18 10-40556- 16 1-2 14 10-40556-26 16 3 12 ON 10-40556-32 16 / 32 28 M 10-40560 12 2,5-3,0 12 M.1 10-40560 TU 12 2,5-3,0 12 M.117 10-40560-12 12 0,6 M.11734 10-40560-15 12 0,75-1 18 M.117082 10-40560- 12 1 2 18 14 M.117082 10-40560-22 12 2,5 / M.117082 10-40560-30 12 4-5 / M.117082 10-40560-30M 12 4 / M.117082 10-40560-38 12 6 10 M.117082 10-40560-50 12 10 / / 10-40560-58 12 13,2 6 / Please consult our sales department for other contact options or crimp to 15 Glenair, Inc. U.S. G ode 06324 Printed in Italy GNIR, IN. 1211 IR WY GN, 911-2497 818-247-6000 FX 818-500-9912-13