INSTALLATION and OPERATING INSTRUCTION MANUAL ANTI-ICE SYSTEM for PICK-UP AND INDEX MID-SIZE TRUCK SAFETY ALERT... 2 APPLICATION RATE CHART... 3 SPRAYER PARTS, VIEWS & LISTS (PICK-UP)... 4-15 VARIABLE ORIFICE NOZZLE SET-UP & ADJUSTMENT... 16-17 SPRAYER PARTS, VIEWS & LISTS (MID-SIZE)... 18-27 NAME PLATE INFORMATION... 28 WARRANTY INFORMATION... 29 May 25, 2010 R
This decal appears at both sides of the top fill opening of the tank, and next to each of the Quik - Coupling locations on the platform. It alerts personnel of the potential for the tank to contain hazardous materials, and to wear appropriate personal protective equipment (PPE) when filling or emptying the tank. This decal appears on the top of the platform, next to each of the storage leg locations. It alerts personnel to, properly, empty the tank before removing it from the truck; and to, properly, secure the legs in the down position after removing the sprayer platform from the truck, prior to storing it. DO NOT ALLOW PUMP TO RUN DRY FLUSH AND DRAIN AFTER USE TO PREVENT FREEZING IF DEFACED ORDER PART NO. 04049 390 00 This decal is affixed to the top of the platform, next to the pump. It alerts the operator to maintain the liquid level in the tank; and to make sure that the valves that supply liquid, between the tank and the pump, are properly adjusted. It also alerts personnel to, properly, flush and drain the system after use, to prevent freezing (and possible damage).
Meyer Spreader Application Rate Chart Rate: Gal / Mi 15 20 25 30 35 40 45 50 60 Truck Speed 5 MPH 1.25 1.67 2.10 2.50 2.90 3.33 3.75 4.20 5.00 10 MPH 2.50 3.33 4.20 5.00 5.80 6.67 7.50 8.33 10.00 15 MPH 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 15.00 20 MPH 5.00 6.67 8.33 10.00 11.67 13.33 15.00 16.67 20.00 25 MPH 6.75 8.33 10.40 12.50 15.80 16.67 18.75 20.80 25.00 30 MPH 7.50 10.00 12.50 15.00 17.50 20.00 22.50 25.00 35 MPH 8.75 11.67 14.60 17.50 20.40 23.33 26.25 40 MPH 10.00 13.33 16.67 20.00 23.33 26.67 45 MPH 11.25 15.00 18.75 22.50 26.25 50 MPH 12.50 16.67 20.80 25.00 Determine application rate in gallons per mile across top row. Determine speed to travel in left column. The number where these two values intersect is the gallons per minute setting for your sprayer. Adjust pump bypass flow to achieve this flow on the flow meter. Rate: Gal / Acre 15 20 25 30 35 40 45 50 60 Truck Speed 5 MPH 1.00 1.40 1.75 2.10 2.40 2.75 3.10 3.40 4.10 10 MPH 2.00 2.75 3.40 4.10 4.80 5.50 6.20 6.90 8.25 15 MPH 3.10 4.10 5.20 6.20 7.25 8.25 9.30 10.30 12.40 20 MPH 4.10 5.50 6.90 8.25 9.60 11.00 12.40 13.75 16.50 25 MPH 5.60 6.90 8.60 10.30 13.00 13.75 15.50 17.20 20.60 30 MPH 6.20 8.25 10.30 12.40 14.40 16.50 18.60 20.60 24.75 Determine application rate in gallons per acre across top row. Determine speed to travel in left column. The number where these two values intersect is the gallons per minute setting for your sprayer. Adjust pump bypass flow to achieve this flow on the flow meter.
SEE PAGES 5 THRU 11 A4 SEE PARTS LIST ON PAGE 11
52 6 37 5 80 SEE PARTS LIST ON PAGE 11 35
14 13 13 7 6 4 26 Inside Tank on other end of 4 13 13 32 12 33 31 SEE PARTS LIST ON PAGE 11
30 29 68 70 70 19 21 23 8 66 24 39 25 40 67 65 70 70 24 15 SEE PARTS LIST ON PAGE 11
41 17 11 16 34 11 9 36 10 71 38 42 71 10 71 43 10 37 10 71 44 45 42 10 71 8 66 10 71 47 SEE PARTS LIST ON PAGE 11
9 36 48 36 9 69 9 36 9 36 9 36 49 9 36 50 54 20 53 18 63 62 60 61 51 12 46 22 SEE PARTS LIST ON PAGE 11
THIS PAGE LEFT BLANK INTENTIONALLY
ANTI-ICE P/U PLATFORM ASSEMBLY 64296 ITEM NO. PART NUMBER DESCRIPTION QTY ITEM NO. PART NUMBER DESCRIPTION QTY 1 64297 Tank, 295 Gal Poly Pick-Up 1 41 63654 Elbow, 2" Flnge, 2" Hse 90D Fulprt 1 2 63627 Assembly, Ratchet/Strap 2 42 63655 Fitting, 2" X 2" Flnge Ful Prt 2 3 64298 Surge Buster, Poly, 7" Opening 11 43 63656 Tee, 2" X 2" X 2" Flnge Ful Prt 1 4 63628 Fitting, 2" Tank Blkhd (Poly) 1 44 63657 Valve, 2" Flnge, 2" Male Couplr 1 5 63629 Fitting, 2" Bulkhd Anti-Vortex 1 45 63621 Cap, Quick Coupler 2" 1 6 63630 Elbow, 2" 45 Degree Poly 2 46 63658 Strainer, 2" Flnge Line 30 Mesh 1 7 63631 Fitting, 2 MPT X 1.5 HSE 90 DG 2 47 63659 Fitting, 2" Flnge X 2" MPT Flprt 1 8 63632 Clamp, 1" Flange 2 48 63660 Fitting, 2" Flange, 2" Fpt Poly 1 9 63633 Clamp, 2" Flange 7 49 63661 Reducer, 2" Mpt, 3/4" Fpt Poly 1 10 63634 Clamp, 2" Flange Full Port Wrm 6 50 63662 Elbow, 3/4" Npt X 1/2" Barb 1 11 63635 Clamp, 2" Hose T-Bolt 2 51 63663 Elbow, 1/2" Npt X 1/2" Barb (Poly) 1 12 63891 lamp, 1" Hose 4 52 63664 Nipple, 2" Mpt, 6" Long Poly 1 13 63892 Clamp, 11/2" Hose S.S. 4 53 63665 Spray Gun, Brass 1/2 Fpt Hvy Dt 1 14 63624 Hose, 11/2" Low Temp Suction 2 ft. 54 63666 Bushing, 1/2" X 3/8" Hex Red Bra 1 15 63636 Hose, 1" Nyl Braid Clear PVC 2.5 ft. 55 64306 Bolt, 1/2-13 X 13 Hh SS 8 16 63626 Hose, 2" Id Poly 50#WP Clr Mesh 1 ft. 56 63259 Locknut, 1/2-13 Nyl Ins SS 8 17 63627 Hose, 1/2" ID Nyl Braid Clr PVC 1.5 ft. 57 62697 Bolt, 3/8-16 X 1 Hh SS 4 18 64299 Reel, Hvy Dty w/50 ft 1/2" Hose 1 58 22230 Flatwasher, 3/8" U.S.S. SS 8 19 64300 Gauge, Dial 0-160 Botm 1/4" Mpt 1 59 62743 Nut, 3/8-16 Ser Flange SS 4 20 63638 Pump, 2" Poly w/5 Hp Honda Eng 1 60 64307 Bolt, 5/16-18 X 13/4 HH SS 4 21 63639 Valve, Elec 1" Flnge Both Ends 1 61 63173 Flatwasher, 5/16" U.S.S. SS 4 22 64301 Pad, 3/8 Thk X 8 X 10 Neoprene 1 62 63309 Lockwasher, 5/16" Med Split SS 4 23 63640 Plug, 2" Flnge w/.25 Fpt Ga Pt 1 63 62641 Nut, 5/16-18 Ser Flange SS 4 24 63641 Tee, 2" Flange 2 64 64308 Bolt, 7/16" X 31/2" HH, GR5ZP 4 25 63642 Adapter, 2" Flange X 2" Mpt. 1 65 63667 Meter, 1" Mpt In-Line Flow 1 26 63643 Elbow, 11/2" 90 Deg. Str. (Poly) 1 66 63668 Gasket, 1" Flange 2 27 64302 Bushin g, 11/2" X 1 " Hex Red. Poly 2 67 63669 Fitting, 1" Fpt, 1" Hose Poly 1 28 64303 Elbow, 1" Npt X 1' Barb (Poly) 1 68 63670 Shank, 1" Npt X 1" Barb (Poly) 1 29 63644 Coupler, 11/2" Quick 1 69 63671 Coupling, 1-1/2" X 1" Rdcr, Poly 1 30 64304 Elbow, 2" Flange 90 Deg Short 1 70 63893 Clamp, 1" Hose 4 31 63645 Elbow, 11/2 Npt X 11/2 Barb 1 71 63672 Gasket, 2" Full Port Flange 6 32 63646 Adapter 2" Flange X 11/2" Mpt 1 72 64309 Foot, Leg, Platform, Anti-Ice 4 33 63647 Valve, 11/2" Fpt, 11/2" Union 1 73 64310 Tube, 11/2" Sq. Leg. Platform 4 34 63648 Tee, 2" X 2" X 1" Flange (Poly) 1 74 64311 Weldment, Platform Anti-Ice P/U 1 35 64305 Valve, 2" Fpt, 3-Way Ball, Poly 1 75 64312 Decal, Warning, Pump 1 36 63649 Gasket, 2" Flange 7 76 64313 Decal, Caution 4 37 63650 Coupler, 2" Female Quik w/2" Mpt 1 77 62497 Decal, Swenson-Black 1 38 63651 Plug, 2" Quick Coupler 1 78 64314 Decal, Danger Leg Stand 4 39 63652 Fitting, 1" Flange, 1" Fpt Poly 1 79 40 63653 Elbow, 1" 90 Deg Street (Poly) 2 80 64315 Shank, 2" Npt (M) X 2" Barb (Poly) 1 81 64316 Pin, Male Prong, Female Plug 3 82 64317 Connector, 3-Wire Female Plug 1 83 64318 Seals, Cable (22 Ga. Wire) 3
SPRAY BOOM ANTI-ICE P/U ASSEMBLY 64330 00118-932-00 ITEM NO. PART NUMBER DESCRIPTION QTY 1 64319 bushing,3/4 x 1/2 hex red(poly) 2 2 64320 bushing, 1 1/2 x 3/4 hex red (poly) 2 3 64321 plug, 1 1/2 npt pipe (plastic) 2 4 64322 tee, 1 1/2 poly npt 3 5 63673 coupler, 1 1/2 quick, male 1 6 62189 bolt, 1/4-20 x 3/4 hh ss 8 7 62690 nut, 1/4-20 ser flange ss 8 8 63587 flatwasher, 1/4 sae ss 2 9 63674 nozzel, 1/2 mpt var orfc poly 2 10 63624 hose, 1 2/2 loe temp suction 4 ft. 11 63892 clamp, 1 1/2 hose ss 8 12 64323 u-bolt, 3/8 square 2 13 64324 u-bolt, 3/8-16 for 2 pipe 6 14 64325 forming, channel spry boom p/u 1 15 64326 plug, cap2 sq. tube, ridged 2 16 64327 weldment, mtg boom, anti-ice 1 17 64328 weldment, guard nozzle anti-ice 2 18 64329 nipple, 1 1/2 king, poly 4 19 63675 elbow, 3/4 x 45 deg st (poly) 2 20 64080 decal, No Step 2 21 62743 nut, 3/8-16 ser flange ss 16
25 NOT SHOWN
CONTROL BOX ANTI-ICE P/U AND M/D ASSEMBLY 63682 ITEM NO. PART NUMBER DESCRIPTION QTY 1 62150 Enclosure 1 2 62155 Switch, On / Off Printed 1 3 62670 Panel, Mounting 1 4 64331 Plug, Mounting Panel 1 5 62159 Screw, #8 X 1/2 Slt Hwh Zp 4 6 64332 Cord Grip, 1/2 (.187-.312 range) 1 7 62199 Locknut, 1/2 Conduit 1 8 64333 Wire, 18Ga. 3-Cond. 20 9 64334 Holder, Fuse 1 10 64335 Fuse, 5 AMP 1 11 62188 16-14 Ga Butt Connectors 1 12 64336 Connector, 3-Wire Male Plug 1 13 14 62046 16-14 Ga 5/16 ring Term. H/S 2 15 64337 Seals, Cable (16-20 Ga Wire) 3 16 62158 Back, Enclosure 1 17 63676 Switch, On / Off, Gr / Red Lights 1 18 62674 Wire, 14 Ga. Black Insulated 6 19 62675 Wire, 14 Ga. Red Insulated 6 20 64338 Pin, Female Socket, Male Plug 3 21 22 62680 16-14 Ga Female Push On 9 23 62156 Double Male - Female Push On 3 24 64339 Wire, 18 Ga. Orange 0.5 25 64340 CTN, 9 1/8 X 4 7/8 X 4 3/4 RSC 1
VARIABLE ORIFICE NOZZLE SET-UP AND ADJUSTMENT BARREL DEFLECTOR TIP TRAVEL DIRECTION THE DEFLECTOR "O-NOZZLES" SPRAY BACKWARDS, THEREBY CANCELING FORWARD SPEEDS OF THE TRUCK. SPRAY STREAMS LAND SOFTLY WITHOUT THE FOG OR CLOUDS CREATED BY WIND TURBULENCE FROM THE FORWARD SPEED OF THE TRUCK. THE USUAL FOG OR CLOUD DROPLETS FROM SPRAYING ARE AVOIDED. SPRAY DIRECTION
PUMP TO RUN DRY DO NOT ALLOW SEE PARTS LIST ON PAGE 25
84 81 9 79 SEE PARTS LIST ON PAGE 25 80
14 13 13 7 6 4 26 Inside Tank on other end of 4 13 13 32 12 33 31 SEE PARTS LIST ON PAGE 11
85 58 60 25 25 51 52 53 54 19 94 64 72 63 61 62 25 25 54 35 SEE PARTS LIST ON PAGE 25
78 50 24 49 65 24 20 93 23 95 83 74 95 23 95 75 23 82 23 95 76 77 74 23 95 19 94 23 95 72 SEE PARTS LIST ON PAGE 25
20 93 66 93 20 59 20 93 20 93 20 93 67 20 93 68 70 4 71 2 29 57 26 27 69 25 73 12 SEE PARTS LIST ON PAGE 25
THIS PAGE LEFT BLANK INTENTIONALLY
MID-SIZE ANTI-ICE PLATFORM ASSEMBLY (GAS ENGINE & HYDRAULIC) 64349 & 64350 ITEM PART DESCRIPTION QTY ITEM PART DESCRIPTION QTY NO. NUMBER NO. NUMBER 1 64351 Weldment, platform 1 51 64300 Gauge, dial 0-160, bottom 1/4 mpt 1 2 64299 Reel, hvy duty w/50 ft 1/2 hose 1 52 63639 Valve elec 1 thd flange intl 1 3 64342 Leg, lower 2 53 63640 Plug, 2 flnge w/.25 fpt ga pt 1 4 63638 Pump, 2 poly w/5 hp honda eng. 1 54 63641 Tee, 2: flange 2 5 64352 Weldment, hoop 2 55 63642 Adapter, 2 flange x 2 mpt 1 6 63628 Fitting, 2 bulkhd (poly) 1 56 63643 Elbow, 1 1/2 90 deg str(poly) 1 7 64353 Bracket mtg, wheel 2 57 20326 Washer, med split 4 8 64309 Foot, leg, platform, anti-ice 2 58 63644 Coupler, 1 1/2 quick 1 9 63629 Fitting, 2 bulkhead anti-vortex 1 59 63671 Coupling, 1 1/2 x 1 rdcr, poly 1 10 63631 Fitting, 2 mpt x 1.5 hse 90 deg 1 60 63670 Shank, 1 npt x 1 hose barb 1 11 64354 Spacer, leg 2 61 63669 Fitting, 1 fpt, 1 hose barb 1 12 64301 Pad, 3/8 thk x 8 x 10 neoprene 1 62 663667 Meter, 1 mpt in-line flow 1 13 64355 Spacer, tank 4 63 63653 Elbow, 1 90 deg street (poly) 1 14 64356 Rod, strap, 61 x 5/8-11 thd 1 64 63652 Fitting, 1 flange, 1 fpt poly 1 15 64357 Wheel, 5 nylon anti-ice MD 2 65 63648 Tee, 2 x2 x2 flange (poly)( 1 16 63815 Tank, 550 gallon, poly anti-ice md 1 66 63660 Fitting, 2 flange, 2 fpt, poly 1 17 64358 Surge buster, poly, 15 opening 11 67 63661 Reducer, 2 mpt, 3/4 fpt poly 1 18 64312 Decal, warning pump 1 68 63662 Elbow, 3/4 npt c 1/2 barb 1 19 63632 Clamp, 1 flange 2 69 63663 Elbow, 1/2 npt x 1/2 barb 1 20 63633 Clamp, 2 flange 7 70 63666 Bushing, 1/2x3/8 hex red bra 1 21 64345 Pin 1/2 x 1/2 clevis 2 71 63665 Spray gun, brass 1/2fpt hvy dty 1 22 61232 Keeper, hairpin small 2 72 63659 Fitting, 2 flange, 2 mpt poly 1 23 63634 Clamp, 2: flange full port wm 6 73 63658 Strainer, 2 flange, 30 mesh 1 24 63635 Clamp 2 hose t-bolt 2 74 63655 Fitting, 2 x2 flange full port 2 25 63893 Clamp 1 hose 8 75 63656 Tee 2x2x2 flange full port 1 26 64359 Bolt, 5/16-18 x 1 3/4 hh gr5 zp 4 76 63657 Valve 2 flange 2 male coupler 1 27 20352 Flatwasher, 5/16 uss zp 4 77 63621 Cap, quick coupler, 2 1 28 63892 Clamp, 1 1/2 hose ss 4 78 63654 Elbow, 2 flange 2 hose, 90d fulprt 1 29 63304 Nut, 5/16-18 ser flange zp 1 79 64315 Fitting, 2 mpt x 2 barb (poly) 1 30 63624 Hose, 1/1/2 low temp suction 5 ft 80 64305 Valve, 2 fpt x 3-way ball, poly 1 31 20049 Bolt, 3/8-16 x 1 hh gr5 zp 4 81 63630 Elbow, 2 45 drg, poly 2 32 20353 Flatwasher, 3/8 uss zp 4 82 63650 Coupler, 2 female quik w/2 mpt 1 33 20327 Lockwasher 3/8 med split zp 4 83 63651 Plug, 2 quick coupler 1 34 63306 Nut 3/8-16 hex zp 4 84 64365 Nipple, 2 mpt, 4 long poly 1 35 63636 Hose, 1 nylon braid clear pvc 2.5 ft 85 64304 Elbow, 2 flange 90 deg short 1 36 64308 Bolt, 7/16 x 3 1/2 hh gr5 zp 2 86 63646 Adapter, 2 flange x 1 1/2 mpt 1 37 20354 Flatwasher, 7/16 uss zp 4 87 63645 Elbow,1 1/2 mpt x 1 1/2 barb 1 38 64360 Nut, 7/16-14 hex zp 2 88 62497 Decal, 2 39 64361 Locknut, 7/16-14 nylon ins zp 2 89 64313 Decal, Caution 2 40 63433 Bolt, 1/2-13, x 1 1/4 hh gr5 zp 2 90 64314 Decal, danger leg stand 4 41 63442 Bolt, 1/2-13 x 3 hh gr5 zp 2 42 64323 Bolt, 1/2-13 x 4 hh gr5 zp 4 92 63647 Valve, 1 1/2 fpt, 1 1/2 union 1 43 20355 Flatwasher 1/2 uss zp 6 93 63649 Gasket, 2 flange 7 44 20347 Locknut, 1/2-13 nyl ins zp 10 94 63668 Gasket, 1 flange 2 45 62570 Nut, 1/2-13 ser flange zp 4 95 63672 Gasket, 2 full port flange 6 46 64363 Flatwasher, 5/8 uss zp 6 96 64316 Pin, male prong, female plug 3 47 63279 Locknut, 5/8-11, top lock, zp 2 97 64317 Connector, 3-wire female plug 1 48 64364 Leg, upper 2 98 64318 Seals, cable, (22 ga wire) 3 49 63626 hose, 2 id, poly, clr 50#wp clr mesh 1 ft 50 63637 hose, 1/2 id nyl braid clr pvc 1.5 ft
SPRAY BAR ASSEMBLY 64341 64332 64343 64309 64344 64345 64346 61232 63673 64347 64348 64322 63624 64321 63674 64320 64319 64329 64323 64324 20003 20325 62478 63267 62611 63892 63675
NAME PLATE INFORMATION When ordering parts or requesting information or assistance, always include the information listed below. The Model Number and Serial Number for the Spreader are shown on the name plate. The space below is provided as a convenient place to record these numbers; just fill in the blanks. MODEL NUMBER SERIAL NUMBER DATE PURCHASED DEALER PURCHASED FROM DEALER S SERVICE DEPARTMENT PHONE NUMBER May be covered by one or more of these patents: XXXXXX Description: P, SJDS - MEYER SPREDER 18513 Euclid Ave. Cleveland, OH 44112 (216) 486-1313 Part Number: XXXXX Serial Number: XXXXX CALL YOUR AUTHORIZED MEYER PRODUCTS DEALER FOR PARTS AND SERVICE MEYER PRODUCTS (216) 486-1313 FAX (216) 486-9775 email: warranty@meyerproducts.com NOTICE: INSTRUCTIONAL MATERIAL AND PARTS LISTS INCLUDED IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE.
SPREADER ONE YEAR WARRANTY Meyer Products ( Meyer ) warrants to the original purchaser only that it will repair, or, at the sole option of Meyer, replace any part of the new Meyer covered product which proves to be defective in workmanship or material under normal use for a period of one year from the date of delivery to the original purchaser. This warranty is not transferable or assignable. The original purchaser s sole and exclusive remedy against Meyer and Meyer s sole obligation for any and all claims, whether for breach of contract, warranty, tort (including negligence) or otherwise shall be limited to providing, through its Distributor/Sub Distributor network, all labor and or parts necessary to correct such defects free of charge. Any cost incurred in returning the product to the Distributor/Sub-Distributor is the responsibility of the original purchaser. The gasoline engine used in this product is covered by its own warranty as provided by the engine manufacturer. A copy of this warranty is included with the engine. EXCLUSIONS THIS WARRANTY DOES NOT COVER PAINT, EXCEPT EXPENDABLE PARTS SUCH AS PINS, SPREADER FINS, AND OTHER NORMAL WEAR ITEMS. MEYER SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY CLAIMS ARISING HEREUNDER, OR FOR DAMAGES RESULTING FROM LACK OF NECESSARY MAINTENANCE, OR FROM MISUSE, ACTS OF GOD, ALTERATION OF A MEYER PLOW, SPREADER OR PART, OR FROM USE OF PARTS OR HYDRAULIC FLUID NOT SUPPLIED BY MEYER. USE OF THE MEYER SNOWPLOW, SPREADER FOR ANY PURPOSE OTHER THAN PLOWING SNOW OR SPREADING APPROVED MATERIAL ARE EXAMPLES OF AN ABUSE AND MISUSE. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. WARRANTY SERVICE In order to obtain service under this warranty, the original purchaser must return the Meyer claimed defective product to the Distributor/Sub-Distributor from whom the product was purchased or to any authorized Meyer Distributor/Sub-Distributor, transportation and freight charges prepaid. Only Meyer Distributor/Sub-Distributors are authorized to perform the obligations under these warranties. GENERAL It is the responsibility of the original purchaser to establish the warranty period by verifying the original delivery date. A bill of sale, cancelled check or some other appropriate payment record may be kept for that purpose. It is recommended, but not required, that the consumer verify the original delivery date by immediately returning the attached Warranty Registration Card. No person is authorized to change this warranty or to create any warranty other than that set forth herein. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Meyer Products 18513 Euclid Avenue Cleveland, Ohio 44112 Phone (216) 486-1313 Fax (216) 486-3073 E-Mail advertising@meyerproducts.com
MEYER PRODUCTS, LLC 18513 EUCLID AVE. CLEVELAND, OHIO 44112-1084 PHONE: (216) 486-1313 FAX: (216) 486-9775 email:warranty@meyerproducts.com website: www.meyerproducts.com IMPORTANT INFORMATION ENCLOSED