CAG Electric Machinery HGLIE2 series THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE Introduction Motors HGL IE2 with cast iron frame offers increased power output with reduced power consumption. This protects the environment and reduces costs for operation. An interesting option is also variable terminal boxes. The cooling method of motors is TEFC, connecting dimensions are according to IEC standard, the protection degree IP55 and temperature insulation class F. This assembly ensures great power and easy interchangeability. Many years of experience in motor construction have enabled us to build a product that excels in low noise, low weight, low vibration and with modern design. Motors require minimal maintenance and have a long life at all. Operating conditions Electrical conditions: Protection conditions: Ambient conditions: Rated frequency: 50, 60Hz Insulation class: F Ambient temperature: -20 to +40 Rated voltage: 400/690V Protection degree: IP 55 Altitude: 1000m Type of duty cycle: S1
Technical information Standard feature: Efficiency class: High Efficiency (IE2) Cooling method: TEFC (Totally enclosed fan cooled) IC411 Rated output: from 15 to 315 kw Number of poles: 2, 4, 6 Frame size: from 180 to 355 Rated frequency: 50 Hz and 60 Hz Rated voltage: 50 Hz: 400/690 V, 60 Hz: 460 V Standard color: RAL 5007 Service factor: 1.00 Ambient temperature: -20 to +40 C, Altitude: 1000 m. a. s. l. Insulation class: F Protection degree: IP55 Standard mounting: IM B3 Vibration class: A Type of duty cycle: S1 Insulation system of motor is suitable for drive the motor by frequency inverter Standard thermal protection: 3xPTO in series (1pc of Bimetal in each coil) Rotor: Aluminum, with squirrel cage Shaft sealing: Oil seal (Gufero) Material of nameplate: Steel Thread in the forward side of shaft Special insulation of winding till the voltage 550V Bearings: Stronger range Cable glands: 2 pc of power, 1 pc of control Optional available: Other mounting: IM B5, B14, B35, B34 Various required voltage Increased insulation class: H Increased vibration class: B Additional vibration sensor Optional thermal protector: 3xPTC in winding (3 in series) 3xPT100 in winding (1 per coil) 2xPT100 in bearing (1 per bearing) Increased protection degree: IP56, IP65, IP66 Optional shaft sealing: labyrinth seal, V-ring Auxiliary terminal box for sensors Winding heating Material of the cooling fan: aluminum, bronzed Roof on the fan cover Double shaft end Encoder (speed sensor) Material of cable gland: metal Material of shaft: Stainless steel Various cooling method Various ambient temperatures
Electrical parameters MODEL Output Current Speed Eff Power Istart/In Tstart/Tn Tmaxd/Tn kw HP A (at 400V) rpm % factor 2 pole / 3000 rpm HGL IE2 180M2-2 22 30 39 2940 91,3 0,89 7,5 2,0 2,3 HGL IE2 200L1-2 30 40 53 2950 92,0 0,89 7,5 2,0 2,3 HGL IE2 200L2-2 37 50 65 2950 92,5 0,90 7,5 2,0 2,3 HGL IE2 225M-2 45 60 78 2950 92,9 0,89 7,5 2,0 2,3 HGL IE2 250M-2 55 75 96 2950 93,2 0,89 7,5 2,0 2,3 HGL IE2 280S-2 75 100 127 2950 93,8 0,91 7,5 2,0 2,3 HGL IE2 280M-2 90 125 152 2950 94,1 0,91 7,5 2,0 2,3 HGL IE2 315S-2 110 150 185 2950 94,3 0,91 7,1 1,8 2,2 HGL IE2 315M-2 132 180 221 2950 94,6 0,91 7,1 1,8 2,2 HGL IE2 315L1-2 160 220 264 2950 94,8 0,92 7,1 1,8 2,2 HGL IE2 315L2-2 200 270 331 2950 95,0 0,92 7,1 1,8 2,2 HGL IE2 355M-2 250 340 411 2950 95,0 0,92 7,1 1,8 2,2 HGL IE2 355L-2 315 430 517 2950 95,0 0,93 7,1 1,8 2,2 4 pole / 1500 rpm HGL IE2 180M-4 18,5 25 35 1470 91,2 0,84 7,5 2,2 2,3 HGL IE2 180L-4 22 30 41 1470 91,6 0,84 7,5 2,2 2,3 HGL IE2 200L-4 30 40 55 1480 92,3 0,86 7,5 2,2 2,3 HGL IE2 225S-4 37 50 66 1480 92,7 0,87 7,2 2,2 2,3 HGL IE2 225M-4 45 60 80 1480 93,1 0,87 7,2 2,2 2,3 HGL IE2 250M-4 55 75 98 1480 93,5 0,87 7,2 2,2 2,3 HGL IE2 280S-4 75 100 133 1480 94,0 0,87 7,2 2,2 2,3 HGL IE2 280M-4 90 125 159 1480 94,2 0,87 7,2 2,2 2,3 HGL IE2 315S-4 110 150 191 1480 94,5 0,88 6,9 2,1 2,2 HGL IE2 315M-4 132 180 228 1480 94,7 0,88 6,9 2,1 2,2 HGL IE2 315L1-4 160 220 273 1480 94,9 0,89 6,9 2,1 2,2 HGL IE2 315L2-4 200 270 341 1480 95,1 0,89 6,9 2,1 2,2 HGL IE2 355M-4 250 340 421 1480 95,1 0,90 6,9 2,1 2,2 HGL IE2 355L-4 315 430 528 1480 95,1 0,91 6,9 2,1 2,2 6 pole / 1000 rpm HGL IE2 180L-6 15 20 30 980 89,7 0,80 7,0 2,0 2,1 HGL IE2 200L1-6 18,5 25 37 980 90,4 0,81 7,0 2,1 2,1 HGL IE2 200L2-6 22 30 42 980 90,9 0,82 7,0 2,1 2,1 HGL IE2 225M-6 30 40 56 980 91,7 0,84 7,0 2,0 2,1 HGL IE2 250M-6 37 50 67 980 92,2 0,86 7,0 2,1 2,1 HGL IE2 280S-6 45 60 82 990 92,7 0,86 7,0 2,1 2,0 HGL IE2 280M-6 55 75 101 990 93,1 0,85 7,0 2,1 2,0 HGL IE2 315S-6 75 100 133 990 93,7 0,87 7,0 2,0 2,0 HGL IE2 315M-6 90 125 161 990 94,0 0,86 7,0 2,0 2,0 HGL IE2 315L1-6 110 150 196 990 94,3 0,86 6,7 2,0 2,0 HGL IE2 315L2-6 132 180 232 990 94,6 0,87 6,7 2,0 2,0 HGL IE2 355M1-6 160 220 277 990 94,8 0,88 6,7 1,9 2,0 HGL IE2 355M2-6 200 270 347 990 95,0 0,88 6,7 1,9 2,0 HGL IE2 355L-6 250 340 432 990 95,0 0,88 6,7 1,9 2,0
List of mountings IMB3 IMB5 IMB14
Outlines and mounting dimensions IM B3 Frame size Number of poles Mounting simensions Overall dimensions A B C D E F G H K AB AC AD HD L 180M 2,4,6,8 271 241 121 48 110 14 42,5 180 14,5 355 380 280 455 740 180L 2,4,6,8 279 279 121 48 110 14 42,5 180 14,5 355 380 280 455 790 200L 2,4,6,8 318 305 133 55 110 16 49 200 18,5 395 420 305 505 790 225S 4 356 286 149 60 140 18 53 200 18,5 395 420 305 505 790 225M 2 356 311 149 55 110 16 49 225 18,5 435 470 335 560 825 225M 4,6,8 356 311 149 60 140 18 53 225 18,5 435 470 335 560 855 250M 2 406 349 168 60 140 18 53 250 24 490 510 370 615 915 250M 4,6,8 457 368 190 65 140 18 58 250 24 490 510 370 615 915 280S 2 457 368 190 65 140 18 58 280 24 550 580 410 680 985 280S 4,6,8 457 368 190 75 140 20 67,5 280 24 550 580 410 680 985 280M 2 457 419 190 65 140 18 58 280 24 550 580 410 680 1035 280M 4,6,8 457 419 190 75 140 20 67,5 280 24 550 580 410 680 1035 315S 2 508 406 216 65 140 18 58 315 28 635 645 530 854 1180 315S 4,6,8 508 406 216 80 170 22 71 315 28 635 645 530 854 1210 315M 2 508 457 216 65 140 18 58 315 28 635 645 530 854 1290 315M 4,6,8 508 457 216 80 170 22 71 315 28 635 645 530 854 1320 315L 2 508 508 216 65 140 18 58 315 28 635 645 530 854 1290 315L 4,6 508 508 216 80 170 22 71 315 28 635 645 530 854 1320 355M 2 610 560 254 75 140 20 67,5 315 28 730 710 655 1010 1525 355M 4,6,8 610 560 254 95 170 25 86 355 28 730 710 655 1010 1550 355L 2 610 630 254 75 140 20 67,5 355 28 730 710 655 1010 1525 355L 4,6,8 610 630 254 95 170 25 86 355 28 730 710 655 1010 1550
Outlines and mounting dimensions IM B5 Frame size Flange size Number of poles D E F G M N P R S T AC AD HF L 180M FF300 2,4,6,8 48 110 14 42,5 300 250 350 0±3,0 18,5 5 380 280 430 740 180L FF300 2,4,6,8 48 110 14 42,5 300 250 350 0±3,0 18,5 5 380 280 430 790 200L FF350 2,4,6,8 55 110 16 49 350 300 400 0±3,0 18,5 5 420 305 480 790 225S FF400 4 60 140 18 53 400 350 450 0±4,0 18,5 5 470 335 535 830 225M FF400 2 55 110 16 49 400 350 450 0±4,0 18,5 5 470 335 535 825 225M FF400 4,6,8 60 140 18 53 400 350 450 0±4,0 18,5 5 470 335 535 825 250M FF500 2 60 140 18 53 500 450 550 0±4,0 18,5 5 470 335 535 855 250M FF500 4,6,8 65 140 18 58 500 450 550 0±4,0 18,5 5 510 370 595 915 280S FF500 2 65 140 18 58 500 450 550 0±4,0 18,5 5 580 410 650 985 280S FF500 4,6,8 75 140 20 67,5 500 450 550 0±4,0 18,5 5 580 410 650 985 280M FF500 2 65 140 18 58 500 450 550 0±4,0 18,5 5 580 410 650 1035 280M FF500 4,6,8 75 140 20 67,5 500 450 550 0±4,0 18,5 5 580 410 650 1035 IM B35 Frame size Flange size Number of poles A B C D E F G H K M N P R S T AB AC AD HD L 180M FF300 2,4,6,8 279 241 121 48 110 14 42,5 180 14,5 300 250 350 0±3,0 18,5 5 355 380 280 455 740 180L FF300 2,4,6,8 279 279 121 48 110 14 42,5 180 14,5 300 350 0±3,0 18,5 5 355 380 280 455 790 200L FF350 2,4,6,8 318 305 133 55 110 16 49 200 18,5 350 300 400 0±3,0 18,5 5 395 420 305 505 790 225S FF400 4 356 286 149 60 140 18 53 225 18,5 400 350 450 0±4,0 18,5 5 435 470 335 560 830 225M FF400 2 356 311 149 55 110 16 49 225 18,5 400 350 450 0±4,0 18,5 5 435 470 335 560 825 225M FF400 4,6,8 356 311 149 60 140 18 53 225 18,5 400 350 450 0±4,0 18,5 5 435 470 335 560 855 250M FF500 2 406 349 168 60 140 18 53 250 24 500 450 550 0±4,0 18,5 5 490 510 370 615 915 250M FF500 4,6,8 406 349 168 65 140 18 58 250 24 500 450 550 0±4,0 18,5 5 490 510 370 615 915 280S FF500 2 457 368 190 65 140 18 58 280 24 500 450 550 0±4,0 18,5 5 550 580 410 680 985 280S FF500 4,6,8 457 368 190 75 140 20 67,5 280 24 500 450 550 0±4,0 18,5 5 550 580 410 680 985 280M FF500 2 457 419 190 65 140 18 58 280 24 500 450 550 0±4,0 18,5 5 550 580 410 680 1035 280M FF500 4,6,8 457 419 190 75 140 20 67,5 280 24 500 450 550 0±4,0 18,5 5 550 580 410 680 1035 315S FF600 2 508 406 216 65 140 18 58 315 28 600 550 660 0±4,0 24 6 635 645 530 845 1180 315S FF600 4,6,8 508 406 216 80 170 22 71 315 28 600 550 660 0±4,0 24 6 635 645 530 845 1210 315M FF600 2 508 457 216 65 140 18 58 315 28 600 550 660 0±4,0 24 6 635 645 530 845 1290 315M FF600 4,6,8 508 457 216 80 170 22 71 315 28 600 550 660 0±4,0 24 6 635 645 530 845 1320 315L FF600 2 508 508 216 65 140 18 58 315 28 600 550 660 0±4,0 24 6 635 645 530 845 1290 315L FF600 4,6,8 508 508 216 80 170 22 71 315 28 600 550 660 0±4,0 24 6 635 645 530 845 1320 355M FF740 2 610 560 254 75 140 20 67,5 355 28 740 680 800 0±4,0 24 6 730 710 655 1010 1525 355M FF740 4,6,8 610 560 254 95 170 25 86 355 28 740 680 800 0±4,0 24 6 730 710 655 1010 1550 355L FF740 2 610 630 254 75 140 20 67,5 355 28 740 680 800 0±4,0 24 6 730 710 655 1010 1525 355L FF740 4,6,8 610 630 254 95 170 25 86 355 28 740 680 800 0±4,0 24 6 730 710 655 1010 1550
Motor namepate: HGL IE2 200 L1-4 HGL - Name of series IE2 - Efficiency class 200 - Height of shaft L1 - Length of frame 4 - Number of poles
CAG Electric Machinery s.r.o. www.cagem.eu