A GROVE WORLDWIDE COMPANY

A GROVE WORLDWIDE COMPANY

R each work areas that were previously unreachable with the Grove Manlift MZll6D aerial work platform! Check these features: Working heights of 116 ft. (35.35m). 700 Ibs. (317kg) unrestricted platform capacity, the largest in this class. Industry leading horizontal reach of 74 ft. (22.55m). Standard 4-wheel crab and coordinated steer. Hydraulically extendable axles. buttons for auxiliary power, engine start, choke, emergency stop and driving horn. Separate operational zone display panel with digital read-out for boom angle and length; a working range diagram with indicator lights; system test push button with indicator light and tilt alarm indicator light. The MZ116D's unsurpassed reach, performance and specifications make it the machine of choice for applications such as shipyards, petrochemica!, bridge work, airports or any application that requires maximum reach and performance. The MZ116D has over 5,090 sq. ft. (473m3) of work area, by far the largest working range in its class. This means more work can be done without time consuming machine relocation. The result... increased productivity and reduced costs. The hydraulically extendable axles provide a solid base for lifting men and materials to the work site. With the axles in the retracted position, the MZll6D maintains a compact width for ease of transport. When the job requires maximum reach, performance and value, the Grove Manlift MZll6D is the right choice. Standard EqaPpnmt PLATFORM All-welded 36 x 60 in. (0.92 x 1.53111) tubular aluminum work platform assembly with inside handrails, sliding bar gate and 180" hydraulic platform rotator. 44 in. (1.12111) high railings with 6 in. (0.15m) toeboard. 110-volt AC wiring with plug and junction box on the turntable and two outlets on the platform, 15 amp resettable circuit breaker, and ground fault interrupter. CONTROLS Proportional controllers with adjustable "ramp-tozero" for drive, lift, telescope and swing. Nonproportional control switches for platform level and platform rotation. Selection switches for highllow engine idle and function speed. Control enable system* with engine run indicator light and foot pedal. Boom cable back-up indicator light. Push - An excluslye PAT Operation Zone System measures boom angle and boom lengtb topmvkce maximam ouh-eacb in all boom c+guratitms. Lower control panel features non-proportional control switches for lift, telescope, swing, platform level and platform rotate. Selection switches for lower/upper control, axle/boom function selection and auxiliary power. Voltmeter, hourmeter, and ignition switch. Electric motor and gear pump driven off the starter batteries provides auxiliary power. Controllable from both control stations. Lockable battery disconnect switch. BOOM All-steel 3-section trapezoidal boom. Mid-section extends by a single stage double acting hydraulic cylinder with integral load holding valve. Synchronized extension of fly section by a leaf-chain with cable back-up. Patented track bridge@ power guide routes hydraulic and electric lines to the platform. Double-acting lift cylinder with integral load holding valve provides boom elevation. Ball bearing swing circle with 360 continuous rotation. Hydraulically driven Grove planetary gear box. Automatic spring applied, hydraulically released disc brakes. Plunger type mechanical house lock.

Standard four-wbeel steeringpnwfdes ex< lonal maneuveramcuy and tbe tigbtest turning rhjs in tbb class. HYDRAULIC SYSTEM Pressure/flow compensated, variable displacement axial piston pump with 43 gpm (163 Ipm). Maximum system operating pressure of 3,700 psi (259 bar). Electrically activated consolidated valve bank provides simultaneous function capability. 10 micron hydraulic pressure filter, 10 micron return filter and magnetic plug in reservoir. 67.5 gal. (255 liter) steel, strap-mounted hydraulic reservoir with integral sight level gauge. POWER PLANT Ford CSG-649 6-cylinder water cooled engine with 110 hp (82kw) @ 2500 rpm. 60 amp alternator. 2 x 12-volt DC negative ground batteries connected in series with 750 CCA Q 0' F (-17' C). 30 gal. (114 liter) steel fuel tank with sight gauge. Patented Grove rcablre "Patcnt pending Pptkmal four-wheel drive provides extra tra&on far -rmersing rougb terrakr CHASSIS Hydraulically extendable front and rear axles with automatic locking cylinders**. Dual hydraulic jacks raise the chassis for axle extensiordretraction. Two-wheel, two speed planetary drive hubs on the front wheels. Rotary flow divider provides differential traction. Four wheel crab and coordinated steering. Tilt alarm, all motion alarm Tie down lugs. Options Ford CSG-649 duavfuel engine. Curnrnins 4BT3.9 4-cylinder turbo charged water cooled diesel with 100 hp (75 kw) 8 2500 rpm. 72 in. (1.83m) or 96 in. (2.44m) platform. 4-wheel drive. 2000 watt llov AC generator. Air power to platform. Platform worklights. Amber strobe light. Travel lights (drive and back-up). Hostile Environment Protection Package. I I@ tbe cbasds OsJ)Jbr axle extenston /rerracnof All axlej*@don controls an? COUV&& grouped (rtgbt) far +tck om&. I

SP~C~~#CC~~#O~S MZ116D Platform Performance Working Height... 116 ft. (35.35m) Maximum Drive Speed: Platform Height...I10 ft. (33.53m) 2 Wheel Drive...3.0 mph (4.8 km/h) Horizontal Reach...-74 ft. (22.55m) 4 Wheel Drive...2.5 mph (4.0 km/h) Platform Capacity: Gradeability (theoretical): Standard 60 in. (1.53m)...700 lbs. (317kg) 2 Wheel Drive...30% Optional 72 in. (1.83m)...700 lbs. (317kg) 4 Wheel Drive...50% Optional 96 in. (2.44m)... 500 lbs. (227kg) Tire Size...13.00R20 Tire Fill...Foam Swing Speed...O. 5 RPM Dimensions Platform Size...36 x 60 in. (0.92 x 1.53m) Overall Height (stowed)...8 ft. 7 1/2 in. (2.63m) Power Source Overall Length...46 ft. 4 in. (14.12m) Engine Make/Model...Ford CSG-649 Overall Width: Engine Horsepower...l 10 hp (82 Kw) Axles Retracted...8 ft. 6 in. (2.59m) Fuel Tank Capacity...30 gal. (114 liters) Axles Extended...12 ft. (3.65m) Turning Radius (inside): Hydraulics Axles Retracted...ll ft. 9 in. (3.58m) Reservoir Capacity...67.5 gal. (255 liters) Axles Extended...14 ft. 9 in. (4.49m) Hydraulic Pump....Axial Piston Turning Radius (outside): Auxiliary Power...Yes Axles Retracted...21 ft. (6.4m).26 ft. (7.92m) Shipping Information Axles Extended... Wheel base...10 ft. 9 in. (3.28m) Weight...39,200 lbs. ( 17781 kg) Tailswing (beyond tires)...4 ft. 11 in. (1.5m) Shipping Cube... 3,413 cu. ft. (96.65m3)

Range Dz*agram ~211 7-10' 0' 10' 20' 30' 40' 50' 60' 70' 80' (-3.0m) (0.h) (3.h) (6.(kn) (9. lm) (12.lrn) (15.2rn) (18.3m) (21.3m) (24.4rn) (-3.h) 3.