.Compact size Size is [6 7.8.mm] contribute to spacesaving The above size is not include the actuator and head..dustproof and splashproof Meets the IP6 degree of protection with high Sealing.. Contribute to simplification of installation design As a result of the overtravel min. 7, contribute to the simplification of the mounting design. ( Lever type only). Wide variety of Models 0 extensive vertical switches of actuator types:.conform to world's main safety standard UL, CSA, TUV and CE acquired. CCC will be acquired at August 0. 6. RoHS compliant As a position sensing switch in the production line of the electronic equipment, automobiles and motorcycles, TV, air conditioner, washing machine, refrigerator, raw materials and other largesized product which is carried with a conveyer. Component such as machine tools and EDM machines. Component such as multi storey car garage, automated warehouse, food processing machine, automatic packaging machine. CLS8 T.Model 0:Resin Roller Lever 0S:Metal Roller Lever 07:Rod Lever 08:Adjustable Resin Roller Lever 08S:Adjustable Metal Roller Lever :Push Plunger :Roller Plunger :Cross Roller Plunger 66:Coil Spring 69:Wire Spring
List of Models Roller Lever Rod Lever Actuator type Roller Material Model Resin CLS80T Metal CLS80ST CLS807T Adjustable Roller Lever Resin CLS808T Push Plunger Roller Plunger Cross Roller Plunger Coil Spring Wire Spring Metal Metal Metal CLS808ST CLS8T CLS8T CLS8T CLS866T CLS869T Ratings Characteristics Rated voltage (V) Noninductive load(a) Resistive load Lamp Load DC 0. 0. AC. 0.7 AC0 DC DC inductive load(a) Inductive load Motor load DC 0. 0. 0.. 0.8 Protective structure Durability Electrical (Resistive load) Contact type Allowable operating speed Insulation resistance Initial contact resistance Withstand voltage (between the same electrode terminal) Vibration resistance ( ) Mechanical Malfunction IP6 More than 0,000,000 More than 00,000 (AC0V A) circuit twin interruption form mm to 0.m/s 00MΩ or more(dc00v) 0mΩ or less AC,000V 0/60Hz min. 0 to Hz double amplitude.mm Impact resistance ( ) Destruction Malfunction More than 000m/s More than 00m/s Ambient operating temp. 0 to +60 (with no icing) Humidity 9%RH or less ( )Except at the CLS866T and CLS869T.
Structure Contact Form Za Circuit Diagram E Roller Lever CLS80T CLS80ST Unit : mm Rod Lever CLS807T Photo is CLS80T Adjustable Roller Lever CLS808T CLS808ST Push Plunger CLS8T Photo is CLS808T
Roller Plunger CLS8T Cross Roller Plunger CLS8T Coil Spring CLS866T Wire Spring CLS869T Operating specifications for each model Operating force Release force Model OF MAX RF MIN CLS80T CLS80ST.88N 0.9N CLS807T.88N 0.69N CLS808T CLS808ST 7.8N 0.9N CLS8T 9.80N.9N CLS8T 9.80N.9N CLS8T 9.80N.9N CLS866T 0.88N CLS869T 0.88N Pretravel PT MAX.mm.mm 7 9 0mm 0mm Operating characteristics Movement differential MD MAX Overtravel Total travel 0 0 7 9 0 0.mm 0 0.mm.mm.mm OT MIN 7.0mm.0mm.0mm TT MIN 9.mm.mm.mm Operating position OP 6±0.8mm 7±0.8mm 7±0.8mm
.Mounting to Front Surface A)Throughhole Panel Mounting M mounting bolt M mounting nut B)Tap Panel Mounting M mounting bolt Spring washer Spring washer.mounting to Rear Surface Mounting Diagram Mounting Diagram M mounting bolt Spring washer Mounting Diagram Note:The tap screw for body are M, P=0.8, with a minimum depth of 7.mm. Use bolts with a length of the panel thickness t + 0.7 mm or less. Loosen the Allenhead bold. Changing the Actuator Mounting Position. (CLS80T, CLS80ST, CLS807T, CLS808T, CLS808ST) By loosening the Allenhead bolt on the actuator lever, the position of the actuator can be set anywhere within the 60. Changing the Head Direction (CLS80T, CLS80ST, CLS807T, CLS808T, CLS808ST) Loosen the screw(black) By loosening one screw(black), the head can be changed at 90 increments in any of the four directions. Do not supply electric power when wiring. Otherwise electric shock may result. Keep the electrical load below the specification. Be sure to evaluate the switch under actual working conditions after installation. Do not touch the switch terminals while the switch has carry current. Otherwise electric shock may result. Be sure to connect the ground terminal to a ground wire. Do not disassemble the switch while the switch has carry current. Otherwise electric shock may result. The durability of the switch greatly varies with working conditions. Before using the switch, be sure to test under actual conditions. Do not miswiring. Otherwise the switch will not function, also the switch itself may become damaged or burnt.
Do not use in demand place of safety to human body for molding machine safety door etc. Wiring Because these switches are not full waterproof structure, do not use outdoors, also in water and oil. Do not use in atmosphere of flammable or explosive gases. Do not use the switch in locations with corrosive gas, such as sulfuric gas(h S or SO ), ammonium gas(nh ), nitric acid gas(h ), chlorine gas(cl ), or high temperature and humidity. If the switch is used in locations with silicone gas, arc energy may create silicon dioxide(sio ) on the contacts and a contact failure may result. If there is silicone oil, silicone sealant, or wire covered with silicone close to the switch, eliminate the source of silicone gas generation.. Loosen the cover mounting screws and remove the cover.. Run the lead wire through the rubber connector. (Do not connect the lead wire to switch terminals directly.). The lead wire pressfit the solderless terminal. conductors Round,. After inserting the solderless terminal into the 6 to 9 dia. Vinyl cabtire cable(vct) conductors 0.7mm switch terminals, and tighten the terminals screws. (0.9 to 0.9N.m). Mount the cover. 6. Tighten the three screws(0.9 to 0.9N.m) Applicable Terminals The solderless terminal with insulation grip Applicable Lead Wires Wire name Vinyl cabtire cord(vctf) 600V vinylinsulated sheath cable(vvf) Number of conductors conductors conductors conductors Conductor size 0.7 mm dia.,.dia.,.6 dia. Finished outside diameter Note:Do not use wires containing silicone, otherwise a contact failure may result. Appropriate Tightening Torque No. type Head mounting screw Cover mounting screw Lever mounting screw Terminal screw(m) Switch mounting screw Appropriate tightening torque 0.9 to 0.9N m 0.9 to 0.9N m. to.9n m 0.9 to 0.9N m. to.9n m In the interest of product improvement, specifications are subject to change without notice. Please use the following about the question about this catalog. (JAPAN HEAD OFFICE) TKR MANUFACTURING (MALAYSIA) SDN. BHD. TEL : +876800/8009 TEL : +6060 FAX : +876806 FAX : +606799/79 Sales representative (EMAIL) : Sales representative (EMAIL) : Mr.KUMAGAI (ykumagai@tkr.co.jp) Mr. KHOO KHONG BOON (khookb@tkr.com.my) Mr.NARITA ( rnarita@tkr.co.jp ) Mr.KAICHI (kaichi@tkr.com.my) Business Hours:8:0 ~ 7:0 Business Hours:8:00 ~ 7:00 (Company holidays is Weekends and National Holidays.) (Company holidays is Weekends and National Holidays.) 6