QA, Q, Q8, Q8A, Q8B, Q6A, QA, Q8A and Q Intermittent Pilot Burner/Igniter-Sensors PRODUCT DATA FEATURES QA, Q8A, Q8B and QA Intermittent Pilot Burner/Igniter-Sensors are compatible with all Honeywell intermittent ignition control modules. Q and Q8 Single-rod Pilot Burner/Igniter Sensors have an integral cable and bent rod that sparks to hood. QA Q,Q8 Q6A Intermittent Pilot Burner/Igniter-Sensor is used with S86, S860, S90, and S860 nonlockout and 90-second lockout modules. Q8A Intermittent Pilot Burner/Igniter-Sensor is used with S86 nonlockout and 90-second lockout modules. Q Two-rod Pilot Burner/Igniter Sensor is used with S8600A,B,C; S860A,B,C,U; S860C; S8600J,K; and S860J,K Two-rod Ignition Modules. Q6A is for energy efficient applications. Q8A,B Q6A QA Q8A is for horizontal mounting only.,000v open circuit spark ignition. Natural and LP gas orifices available. Variety of target styles available. Variety of mounting brackets available. Q8A Q GENERAL These Intermittent Pilot Burner/Igniter-Sensors consist of low output conventional target type pilot burners and either a combination spark igniter and flame sensor or a separate spark igniter and flame sensor (two rod) mounted in place of the thermocouple. Contents General... Features... Specifications... Ordering Information... Installation... Startup and Checkout... 6 Operation... Service... Copyright 996 Honeywell Inc. All Rights Reserved 68-009-
SPECIFICATIONS IMPORTANT The specifications given in this publication do not include normal manufacturing tolerances. Therefore, this unit might not exactly match the listed specifications. Also, this product is tested and calibrated under closely controlled conditions, and some minor differences in performance can be expected when those conditions are changed. TRADELINE Models TRADELINE models are selected and packaged for ease of handling, ease of stocking, and maximum replacement value. TRADELINE model specifications are the same as those of standard models, except as noted. TRADELINE Models Available: QA, Q and Q8 Pilot Burner/Igniter-Sensors. Additional Features: QA, Q and Q8 Pilot Burner/Igniter-Sensors include a mounting bracket adapter for converting style B mounting brackets to style A mounting brackets. Models: Refer to Table. Target Styles and Flame Patterns: Refer to Fig.. Mounting Brackets and Dimensions: Refer to Fig. through 0. Style A Mounting Bracket Adapter Dimensions: Refer to Fig.. Type of Gas: Models available for Natural and LP gas. ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE wholesaler or your distributor, refer to the TRADELINE Catalog or price sheets for complete ordering number, or specify:. Device number.. Target wingspan (Q8 only).. Tip style. 6. Raised or standard target (Q only).. Mounting bracket style (number or letter).. Accessories, if required.. Type of gas. ORDERING EXAMPLE: Device Tip Style Mounting Bracket Style Type of Gas QA K 80R* Natural * R specifies a raised target. Use this example to order a QAK80R-Natural Pilot Burner. If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:. Your local Honeywell Home and Building Control Sales Office (check white pages or phone directory).. Home and Building Control Customer Relations Honeywell, 88 Douglas Drive North Minneapolis, Minnesota In Canada Honeywell Limited, Dynamic Drive, Scarborough, Ontario MV Z9. International Sales and Service Offices in all principal cities of the world. 68-009
Table. Model Specifications. Models Type of Gas Orifice Type Targert Style and Mounting Brackets Accessories (Specify when ordering) QA Natural and LP Insert Refer to Fig. and Bleed tube clip compression fitting Q Natural and LP Insert Refer to Fig. Bleed tube clip compression fitting Q8 Natural and LP Insert Refer to Fig. Bleed tube clip compression fitting QA Natural and LP Insert Refer to Fig. Bleed tube clip compression fitting Q8A and Q8B Natural and LP Spud Refer to Fig. 6 and Bleed tube clip compression fitting Q6A Natural and LP Insert Refer to Fig. 8 Bleed tube clip compression fitting Q8A Natural and LP Insert Refer to Fig. 9 Bleed tube clip compression fitting Q Natural and LP Insert Refer to Fig. 0 N/A Maximum Temperature Ratings: Ignition Electrode Insulator: Most models: F (968 C); Q only: 0 F (6 C). Pilot Burner Target Tip: 00 F (86 C). Insulator: 0 F (6 C). Cable Temperature (for Q model only): 8 F (0 C). Bracket: 000 F (8 C). Orifice: 800 F ( C). Electrode/Flame Rod Material: Kanthal. Spark Gap (all models except Q, Q and Q8): /8 in. ( mm) Q, Q8:.080 in. to.0 in. Q:.00 to.0 in. Wiring Connection: Most models: Single / in. (6 mm) diameter base stud for ignition cable; Q only: / in. (6 mm) quick connect for igniter rod,.8 in. quick connect for sensor rod. Ignition Cable (All except Q, Q8 and Q): Refer to Table. Table. Recommended Ignition Cables. Temperature Rating Cable Type Vrms Rating F C UL Style 0,000 0 0 UL Style 0,000 8 0 Approvals: Underwriters Laboratories Inc. Listed: File no. MP998, Guide no. MCUR. Canadian Gas Association Certified: 09-AB-886 (09-ABI-8, Q8 only); 09-ABI-86A, Q only). International Approval Services Certified: L000, except Q8A and Q. Accessories: 869 Replacement / in. OD Compression Fitting. 90 /8 in. Bleed Tube Fitting. 00DB Spark/Sensor Replacement for Q. 68-009
/ / /6 / / /8 / /6 -/6 /6 / / / -/6 -/ A B / -/ / / / /8 - / -/ -9/ E 6 -/8 STANDARD, -9/6 RAISED. /8 STANDARD, RAISED. HOLE FOR BLEED TUBE. MOUNTING HOLE (), TAPPED FOR 0- NC SCREW. MOUNTING HOLE (), /6 DIA ( ) (CLEARS NO. 8 SCREW). MOUNTING HOLE (), /6 DIA ( ) (CLEARS NO. 0 SCREW). / COMPRESSION FITTING. / /6 / /8 / /6 / / 9/ 0.8.6...0.8.6 6.. /6 / /8 / /6 / / / 9/6.9 8. 9. 0...9... 9/ / / / / /6 /..9 6.. 8. 9. 9.8 0.6. /8 9/ /6 /..0.8.6. 0.8 M0B Fig.. A, B, and E mounting bracket dimensions in in. (mm) for QA. 68-009
-/ / / / -9/ / -/ /8 - / - /6 /8 / / -/ K / / -9/ -/ /8 No. -/ / / / /8 - / -/ -9/ No. 6 -/8 STANDARD, -9/6 RAISED. /8 STANDARD, RAISED. HOLE FOR BLEED TUBE. MOUNTING HOLE (), TAPPED FOR 0- NC SCREW. MOUNTING HOLE (), /6 DIA ( ) (CLEARS NO. 8 SCREW). MOUNTING HOLE (), /6 DIA ( ) (CLEARS NO. 0 SCREW). / COMPRESSION FITTING. / /6 / /8 / /6 / / 9/ 0.8.6...0.8.6 6.. /6 / /8 / /6 / / / 9/6.9 8. 9. 0...9... 9/ / / / / /6 /..9 6.. 8. 9. 9.8 0.6. /8 9/ /6 /..0.8.6. 0.8 M0B Fig.. K, No. and No. mounting bracket dimensions in in. (mm) for QA. 68-009