LIFTS: Self-Propelled, Material Handling, etc.

Price quote for: LIFTS: Self-Propelled, Material Handling, etc. Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Email Address: Ziegler Inc. Jeff Drake 901 W 94th St Minneapolis, MN 55420 952-888-4121 800-352-2812 jeff.drake@zieglercat.com Version of Excel used: 2013 PERCENTAGE DISCOUNT OFF LIST PRICING Spec # Information Requested Answer 1.0 CATALOG SECTION 1.1 Manufacturer Skyjack 1.2 Catalog / Price List Title / I.D. Nbr. Catalog / Price List Date 1/1/2017 1.3 Percentage Discount to be applied to Price List: 39% Discount 1.4 Warranty 2 year full machine / 5 year structural 1.5 Price for Additional Set of Fluid and Air Filters (if applicable): $ 500 1.6 Price for Set of Repair, Parts and Operating Manuals: $ 500 1.7 For Vendor Owned Rental Return Or Demo Equipment Program DEDUCT cost per Used Hour from the original Contract Price: (See Solicitation Special Terms and Conditions.) N/A 2.0 DELIVERY (See Special Terms and Conditions - No Flat Rate Allowed) 2.1 City, State, & Zip Code Nearest Ziegler Location 2.2 Price per loaded mile $5.00 per mile ($250 minimum) 3.0 INSTALLATION - LABOR RATE PER HOUR (Hourly Shop Rate): Installation services may be requested on an "as needed" basis - see special terms and conditions.) $131/hr 4.0 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 4.1, 4.2 etc. (Specify months/years or hours extended term covers.) Price: $

VERTICAL MAST LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ 12 $17,320 12 (3.65 m) Raised Platform Height 30.5 (0.77 m) Overall Width 54 (1.37 m) Overall Length 70.3 (1.79 m) Stowed Height 27 x 36.8 (0.69 x 0.93 m) Platform Size (Inside) SJ 16 $18,965 15 7 (4.75 m) Raised Platform Height 30.5 (0.77 m) Overall Width 54 (1.37 m) Overall Length 70.3 (1.79 m) Stowed Height 27 x 36.8 (0.69 x 0.93 m) Platform Size (Inside) Variable speed, front two wheel hydraulic drive Zero inside turning radius Dual holding brakes Proportional controls 20 (0.51 m) Traversing platform 24V DC power source Low voltage battery protection 30% Gradeability Solid rubber, non-marking tires Pothole protection system 110V AC outlet at platform with GFI 28 mph wind rating Tilt alarm with drive & lift cut-out All motion audible alarm Lanyard attachment points Lift rings/tie downs Chain entrance Color coded and numbered wiring system Light duty pipe rack...$480 Tool tray... $120 Florescent tube carrier... $295 Dual flashing lights...$465 800W AC inverter...$2,425 AGM Batteries...$1,105 Full height spring hinged gate...$365 Saloon gate...$420 Bio oil... $390 Shroud-style control box guard... $160 Standard lead times may be increased when optional equipment is added, consult factory

DC ELECTRIC SCISSOR LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJIII 3215 $16,755 15 (4.6 m) Raised Platform Height 600 lbs (272 kg) Capacity 32 (0.81 m) Overall Width 70 (1.8 m) Overall Length 60.1 OPT (1.5 m) Stowed Height (Rails Down) 26 x 64 (0.66 x 1.6 m) Platform Size (Inside) SJIII 3219 $17,370 19 (5.8 m) Raised Platform Height 550 lbs (249 kg) Capacity 32 (0.81 m) Overall Width 70 (1.8 m) Overall Length 64.5 OPT (1.6 m) Stowed Height (Rails Down) 26 x 64 (0.66 x 1.6 m) Platform Size (Inside) Variable speed, front two wheel hydraulic drive DC motor controller 90 steering (zero inside turning radius) Dual holding brakes Proportional controls for drive & lift functions 3 (0.9 m) Roll out extension deck 24V DC power source Low voltage battery protection 30% Gradeability Solid rubber, non-marking tires Pothole protection system 28 mph wind rating Tilt alarm with drive & lift cut-out All motion audible alarm Lanyard attachment points Forklift pockets and tie down/lift lugs Color coded and numbered wiring system Light duty pipe rack...$480 Heavy duty pipe rack...$1,060 Board carrier (SJIII 3219 only)...$720 Flashing light...$245 Dual flashing lights...$465 Extended control box cable... $115 800W AC inverter...$2,425 250 Ah batteries (cannot be combined with EE rating package)... $315 AGM Batteries...$1,105 EE rating package (not available with motor controller)... $1,025 Hinged railing system... $820 Half height spring hinged gate... $260 Full height spring hinged gate *... $365 Shroud-style control box guard... $155 *not available with hinged railing system Standard lead times may be increased when optional equipment is added, consult factory

DC ELECTRIC SCISSOR LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJIII 3220 $20,505 20 (6.1 m) Raised Platform Height 900 lbs (408 kg) Capacity 32 (0.81 m) Overall Width 91.5 (2.3 m) Overall Length 63.5 OPT (1.6 m) Stowed Height (Rails Down) 28 x 84 (0.71 x 2.1 m) Platform Size (Inside) SJIII 3226 $25,080 26 (7.9 m) Raised Platform Height 32 (0.81 m) Overall Width 91.5 (2.3 m) Overall Length 70.6 (1.8 m) Stowed Height (Rails Down) 28 x 84 (0.71 x 2.1 m) Platform Size (Inside) SJIII 4626 $26,110 26 (7.9 m) Raised Platform Height 1,000 lbs (454 kg) Capacity 46 (1.2 m) Overall Width 91 (2.3 m) Overall Length 70.5 (1.8 m) Stowed Height (Rails Down) 42 x 84 (1.1 x 2.1 m) Platform Size (Inside) SJIII 4632 $32,480 32 (9.8 m) Raised Platform Height 700 lbs (318 kg) Capacity 46 (1.2 m) Overall Width 91 (2.3 m) Overall Length 74 (1.9 m) Stowed Height (Rails Down) 42 x 84 (1.1 x 2.1 m) Platform Size (Inside) Standard lead times may be increased when optional equipment is added, consult factory # Aircraft protection package includes other listed options as part of package (Option includes full height gate, 6 power deck, bumper padding, bumper rails, morton tread plate, modified air-line to platform, spin-off hydraulic filter, extension deck interlock, front access gate with interlock, filter fittings on power deck ext. hydraulic circuit, base powerdeck controls (Incl. keyless start/base toggle switches), entry handrails, safety labels, interlock on rear entrance, e-coating on deck only, napa ground strap manuals (1 operator, 1 parts, 1 service, 1 usb per machine), 35 mph wind rating, off-board battery charger) Variable speed, rear two wheel hydraulic drive DC motor controller Dual holding brakes Proportional controls for drive & lift functions 3 (0.9 m) Roll out extension deck (32XX s) 4 (1.2 m) Roll out extension deck (46XX s) 24V DC power source Low voltage battery protection Up to 30% Gradeability Solid rubber, non-marking tires Pothole protection system 28 mph wind rating Tilt alarm with drive & lift cut-out All motion audible alarm Lanyard attachment points Hinged railing system (except SJIII 3220) Forklift pockets and tie down/lift lugs Color coded and numbered wiring system Light duty pipe rack...$480 Heavy duty pipe rack...$1,060 Board carrier (SJIII 3226 and SJIII 4632 only)...$720 Flashing light...$245 Dual flashing lights...$465 Extended control box cable... $115 6 (1.8 m) Powered ext. deck (SJIII 3220) *...$3,390 *adds 280 lbs to unit weight and reduces overall capacity to 800 lbs 6 (1.8 m) Powered ext. deck (SJIII 4626) *...$4,340 *adds 280 lbs to unit weight and capacity remains the same 800W AC inverter...$2,425 250 Ah batteries (cannot be combined with EE rating package)... $315 AGM Batteries...$1,105 EE rating package (not available with motor controller)... $1,025 Aircraft protection package # (SJIII 4626)... $17,470 Hinged railing system (SJIII 3220)... $820 Half height spring hinged gate... $260 Full height spring hinged gate *... $365 *not available with hinged railing system on SJIII 32XX s Shroud-style control box guard... $160

DC ELECTRIC SCISSOR LIFTS LIST LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJIII 4740 $43,795 38 7 (11.8 m) Raised Platform Height 47 (1.19 m) Overall Width 94.5 (2.40 m) Overall Length 87.3 (2.21 m) Stowed Height (Rails Down) 42 x 86 (1.06 x 2.19 m) Platform Size (Inside) Variable speed, front wheel hydraulic drive DC motor controller Half height hinged gate Dual holding brakes Proportional controls for drive & lift functions 3 (0.9 m) Roll out extension deck 24V DC power source Low voltage battery protection 25% Gradeability Solid rubber, non-marking tires Pothole protection system 28 mph wind rating Tilt alarm with drive & lift cut-out All motion audible alarm Lanyard attachment points Hinged railing system Forklift pockets and tie down/lift lugs Color coded and numbered wiring system Telematics Ready Light duty pipe rack...$480 Heavy duty pipe rack...$1,060 Board carrier...$720 Flashing light...$245 Dual flashing lights...$465 Extended control box cable... $115 800W AC inverter...$2,425 AGM Batteries...$1,105 Full height spring hinged gate... $260 Shroud-style control box guard... $160 Standard lead times may be increased when optional equipment is added, consult factory

ROUGH TERRAIN SCISSOR LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ6832 RTE $56,475 32 (9.8 m) Raised Platform Height 1,000 lbs (454 kg) Capacity 69.5 (1.76 m) Overall Width 107 (2.7 m) Overall Length 69 (1.8 m) Stowed Height (Rails Down) 56 x 96 (1.4 x 2.4 m) Platform Size (Inside) 16hp AC electric motor with motor controller 48V 250Ah battery pack Low voltage battery protection Standard foam filled grip lug non-marking tires Color coded and numbered wiring 2 Year Warranty Crossover symmetrical 4WD with roll out deck fully extended 5 (1.52 m) roll out extension deck Multiple wet disc spring applied, hydraulic release (SAHR) brakes Tilt alarm with drive & lift cut-out Lanyard attachment points All motion audible alarm Hinged railing system Forklift pockets and tie down/lift lugs Full height spring-hinged gate at rear of unit Heavy duty pipe rack...$1,980 Independent/auto leveling outriggers...$9,600 Hybrid Power Pack (2.2kW Genset)...$3,080 800W AC Inverter... $3,290 High Capacity AGM Batteries (330 Ah)...$3,595 Flashing Light...$245 Shroud-style control box guard... $160 Standard lead times may be increased when optional equipment is added, consult factory

ROUGH TERRAIN SCISSOR LIFTS LIST LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ6826 RT $50,025 26 (7.9 m) Raised Platform Height 1,250 lbs (567 kg) Capacity 69.5 (1.76 m) Overall Width 107 (2.7 m) Overall Length 63.5 (1.6 m) Stowed Height (Rails Down) 56 x 96 (1.4 x 2.4 m) Platform Size (Inside) SJ6832 RT $56,395 32 (9.8 m) Raised Platform Height 1,000 lbs (454 kg) Capacity 69.5 (1.76 m) Overall Width 107 (2.7 m) Overall Length 69 (1.8 m) Stowed Height (Rails Down) 56 x 96 (1.4 x 2.4 m) Platform Size (Inside) Crossover symmetrical 4WD with roll out deck fully extended 5 (1.52 m) Roll out extension deck Dual fuel (gas/propane) or diesel engine 90 swing out engine tray Multiple wet disc spring applied hydraulic release brakes Up to 50% Gradeability Foam-filled low profile grip lug tires Tilt alarm with drive & lift cut-out Lanyard attachment points All motion audible alarm Hinged railing system Forklift pockets and tie down/lift lugs Full height spring hinged gate at rear of unit Color coded and numbered wiring system Heavy duty pipe rack...$1,980 Diesel scrubber for tier 4 final engine...$1,165 Independent/auto leveling outriggers... $9,645 Flashing light...$245 Heavy Duty Pipe rack...$1,690 2000W hydraulic generator...$4,525 Cold weather start package... $1,165 (Includes hydraulic oil tank heater, battery blanket, coolant or block heater) Positive air shut-off valve... $3,295 Shroud-style control box guard... $160 Tire Air-filled tires (SJ6826 RT only)...n/c Foam-filled non-marking tires... $1,355 Standard lead times may be increased when optional equipment is added, consult factory

ROUGH TERRAIN SCISSOR LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ8831 RT $78,080 31 (9.4 m) Raised Platform Height 2,000 lbs (907 kg) Capacity 87 (2.2 m) Overall Width 139 (3.5 m) Overall Length 78.5 (2.0 m) Stowed Height (Rails Down) 67 x 134 (1.7 x 3.4 m) Platform Size (Inside) 4 (1.2 m) Roll out extension deck SJ8841 RT $85,785 41 (12.5 m) Raised Platform Height 1,500 lbs (680 kg) Capacity 87 (2.2 m) Overall Width 139 (3.5 m) Overall Length 87.5 (2.2 m) Stowed Height (Rails Down) 67 x 134 (1.7 x 3.4 m) Platform Size (Inside) 4 (1.2 m) Roll out extension deck Axle based 4WD system Detroit Locker type rear differential and limited slip front differential Dual fuel (gas/propane) or diesel engine Self-centering scissor design allows extension decks to be added to both ends 4 (1.2 m) Roll out extension deck Disc brake system on rear axle 30% Gradeability Tilt alarm with drive & lift cut-out All motion audible alarm Lanyard attachment points Tie down/lift lugs Flashing light Fold down hinged railing system Half height spring hinged gates on both sides Grip Lug, air-filled tires Color coded and numbered wiring system Heavy duty pipe rack...$1,980 Material handling stand...$2,965 Dual 4 (1.2 m) Roll out extension decks...$2,210 3500W hydraulic generator...$4,525 Independent/auto leveling outriggers... $10,380 Diesel scrubber for tier 4 interim engine...$1,165 Full height spring hinged gates...$615 Cold weather start package...$1,165 (Includes hydraulic oil tank heater, battery blanket, coolant or block heater) Positive air shut-off valve... $3,295 Shroud-style control box guard... $160 * Flotation type tires reduce capacity to 1,700 lbs on SJ8831 RT, and reduces capacity to 1,250 lbs on SJ8841 RT Tire Grip lug foam-filled tires...$2,445 High flotation air-filled tires*... $2,655 Non-marking grip lug air-filled tires...$1,505 Non-marking grip lug foam-filled tires...$3,450

ROUGH TERRAIN SCISSOR LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ9250 RT $106,855 50 (15.2 m) Raised Platform Height 1,500 lbs (680 kg) Capacity 92 (2.3 m) Overall Width 176 (4.5 m) Overall Length 90 (2.3 m) Stowed Height (Rails Down) 74 x 168 (1.9 x 4.3 m) Platform Size (Inside) 5 (1.5 m) Powered extension deck Axle based 4WD system Detroit Locker type rear differential and limited slip front differential Dual fuel (gas/propane) or diesel engine Self-centering scissor design allows extension decks to be added to both ends 5 (1.5 m) Powered extension deck Disc brake system on rear axle Independent/Auto leveling outriggers 30% Gradeability Tilt alarm with drive & lift cut-out All motion audible alarm Lanyard attachment points Tie down/lift lugs Flashing light Fold down hinged railing system Half height spring hinged gates on both sides Grip Lug, air-filled tires Color coded and numbered wiring system Heavy duty pipe rack...$1,980 Material handling stand...$2,965 Dual 5 (1.5 m) Powered extension decks...$5,690 3500W hydraulic generator...$4,525 Diesel scrubber for tier 4 interim engine...$1,165 Full height spring hinged gates...$615 Cold weather start package...$1,165 (Includes hydraulic oil tank heater, battery blanket, coolant or block heater) Positive air shut-off valve... $3,295 Shroud-style control box guard... $160 Tire Grip lug foam-filled tires...$2,445 Non-marking grip lug air-filled tires...$1,505 Non-marking grip lug foam-filled tires...$3,450

ARTICULATING BOOM LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ30 AJE $78,065 29 9 (9.07 m) Platform Height 4 1 (1.25 m) Jib 20 6 (6.25 m) Horizontal Reach 13 1 (3.99 m) Up and Over Height 355 Non-Continuous Turret Rotation 30 x 46 (0.76 x 1.17 m) Platform Size SJ30 ARJE $80,295 29 6 (9.00 m) Platform Height 4 1 (1.25 m) Jib 180 Horizontal Jib Rotation 20 6 (6.25 m) Horizontal Reach 13 1 (3.99 m) Up and Over Height 355 Non-continuous Turret Rotation 30 x 46 (0.76 x 1.17 m) Platform Size Pipe rack... $850 Platform work lights...$830 High capacity batteries (360 Ah)... $630 AGM batteries (330 Ah)... $4,000 Rear entry gate... $315 Bio oil... $355 Control box cover... $745 Flashing light... $245 1/2 airline to platform... $670 800W AC Inverter... $5,015 Direct AC electric drive Dual spring applied, electromagnetically released brakes Regenerative braking Speed and angle sensing traction control 48V 305 Ah battery pack 28 mph (12.5 m/s) wind rating DC Powered emergency lowering Secondary guarding electrical (SGE) 355 Non-continuous turret rotation 35% Gradeability Swing out battery trays Swing out cowlings Modular platform railing system Rear-entry sliding mid rail Direction sensing drive and steer controls Proportional drive and boom controls Function speed selector Color coded and numbered wiring Hourmeter All motion alarm Tie down/lifting lugs 22 x 7 x 12 solid rubber, non-marking tires

ARTICULATING BOOM LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ46 AJ $101,825 46 3 (14.10 m) Platform Height 5 (1.5 m) Jib 25 2 (7.7 m) Horizontal Reach 25 0 (7.6 m) Up and Over Height 360 Continuous Turret Rotation 30 x 72 (0.8 x 1.8 m) Platform Size Axle based 4WD system Operator controlled locking rear differential and limited slip front differential Oscillating axle 360 continuous turret rotation 45% Gradeability Diesel or dual fuel engine Swing out engine tray Swing up cowlings Modular platform railing system Dual-entry sliding mid rails Direction sensing drive and steer controls Proportional controls Color coded and numbered wiring Hourmeter All motion alarm Tie down/lifting lugs Wet disc SAHR brakes (rear axle) 12 x 16.5 grip lug air-filled tires Pipe rack... $850 Glazier kit... $965 Platform work lights...$830 30 x 60 Platform... N/C 3.5 kw generator... $5,085 (Includes hydraulic oil cooler) Welder ready package... $10,670 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, and welder mount) Welder package... $15,365 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, welder mount, and Lincoln V275-S welder) Cold weather start kit*... $2,360 *Recommended for regions where average monthly low temperatures can reach 14 F / -10 C (Includes cold start engine oil, battery blanket, hydraulic tank heater, and engine load kit (Deutz D2.9L)) Arctic weather package*... $2,880 *Recommended for regions where average monthly low temperatures can reach -0.4 F / -18 C (Includes arctic engine oil, battery blanket, hydraulic tank heater, engine load kit (Deutz D2.9L), block heater, arctic hydraulic oil, arctic platform rotator and arctic gear oil in the axles and swing drive. Glow plugs, arctic hydraulic hoses (all), and oversized foot switch cover are also included (standard equipment).) Hydraulic oil cooler... $1,765 Side gate... $315 Flashing light... $635 1/2 airline to platform... $670 Auxiliary top rail (30 x 72 platform only)... $955 Control box cover... $745 Positive air shut-off valve... $3,295 Secondary Guarding (electrical or mechanical)... $1,975 Tire Grip lug air-filled non-marking tires... $1,980 Grip lug foam-filled non marking tires... $5,090 Grip lug foam-filled tires... $3,270 High flotation air-filled tires... $3,450

ARTICULATING BOOM LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ63 AJ $151,205 63 7 (19.4 m) Platform Height 5 6 (1.7 m) Jib 40 0 (12.2 m) Horizontal Reach 27 6 (8.4 m) Up and Over Height 360 Continuous Turret Rotation 36 x 96 (0.9 x 2.4 m) Platform Size Axle based 4WD system Operator controlled locking rear differential and limited slip front differential Oscillating axle 360 continuous turret rotation 45% Gradeability Diesel or dual fuel engine Swing out engine tray Swing up cowlings Modular platform railing system Tri-entry sliding mid-rails Direction sensing drive and steer controls Proportional controls Color coded and numbered wiring Hourmeter All motion alarm Tie down/lifting lugs Wet disc SAHR brakes (front and rear axle) Grip lug air-filled tires Pipe rack... $850 Glazier kit... $965 Platform work lights...$830 36 x 72 Platform... N/C 3.5 kw generator... $5,085 (Includes hydraulic oil cooler) Welder ready package... $10,670 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, and welder mount) Welder package... $15,365 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, welder mount, and Lincoln V275-S welder) Cold weather start kit*... $2,360 *Recommended for regions where average monthly low temperatures can reach 14 F / -10 C (Includes cold start engine oil, battery blanket, hydraulic tank heater, and engine load kit (Deutz TD2.9L)) Arctic weather package*... $3,570 *Recommended for regions where average monthly low temperatures can reach -0.4 F / -18 C (Includes arctic engine oil, battery blanket, hydraulic tank heater, engine load kit (Deutz TD2.9L), block heater, arctic hydraulic oil, arctic platform rotator and arctic gear oil in the axles and swing drive. Glow plugs, arctic hydraulic hoses (all), and oversized foot switch cover are also included (standard equipment).) Extra propane tank and bracket (dual fuel only)... $825 Hydraulic oil cooler... $1,765 Flashing light... $635 1/2 airline to platform... $670 Hostile environment package... $4,575 (Includes cylinder bellows, boom wipers, covers for the fly boom cutouts, and control box cover) Auxiliary top rail (36 x 96 platform only)... $955 Control box cover... $745 Side gate... $315 Positive air shut-off valve... $3,295 Secondary Guarding (electrical or mechanical)... $1,975 Tire Grip lug air-filled non-marking tires... $1,970 Grip lug foam-filled non marking tires... $5,425 Grip lug foam-filled tires... $4,210 High flotation air-filled tires... $5,855

TELESCOPIC BOOM LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ40 T $108,315 40 7 (12.4 m) Platform Height 650 lbs (295 kg) Capacity 34 (10.4 m) Horizontal Reach 170 Platform Rotation 36 x 96 (0.91 x 2.4 m) Platform Size SJ45 T $117,675 45 2 (13.8 m) Platform Height 5 Jib 39 9 (12.1 m) Horizontal Reach 170 Platform Rotation 36 x 96 (0.91 x 2.4 m) Platform Size Axle based 4WD system Detroit Locker type rear differential and limited slip front differential Oscillating axle 45% Gradeability Diesel or dual fuel engine Swing out engine tray Swing up cowlings Modular platform railing system Tri-entry sliding mid rails Direction sensing drive and steer controls Proportional controls Color coded and numbered wiring 360 continuous turret rotation Hourmeter All motion alarm Tie down/lifting lugs Wet disc SAHR brakes (rear axle) 12 x 16.5 grip lug air-filled tires Pipe rack... $850 Glazier kit... $965 Platform work lights...$830 36 x 72 Platform... N/C 3.5 kw generator... $5,085 (Includes hydraulic oil cooler) Welder ready package... $10,670 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, and welder mount) Welder package... $15,365 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, welder mount, and Lincoln V275-S welder) Cold weather start kit*... $2,360 *Recommended for regions where average monthly low temperatures can reach 14 F / -10 C (Includes cold start engine oil, battery blanket, hydraulic tank heater, and engine load kit (Deutz D2.9L)) Arctic weather package*... $3,570 *Recommended for regions where average monthly low temperatures can reach -0.4 F / -18 C (Includes arctic engine oil, battery blanket, hydraulic tank heater, engine load kit (Deutz D2.9L), block heater, arctic hydraulic oil, arctic platform rotator and arctic gear oil in the axles and swing drive. Glow plugs, arctic hydraulic hoses (all), and oversized foot switch cover are also included (standard equipment).) Hydraulic oil cooler... $1,765 Side gate... $315 Flashing light... $635 1/2 airline to platform... $670 Auxiliary top rail (36 x 96 platform only)... $955 Control box cover... $745 Positive air shut-off valve... $3,295 Secondary Guarding (electrical or mechanical)... $1,975 Tire Grip lug foam-filled tires... $3,275 High flotation air-filled tires... $3,450

TELESCOPIC BOOM LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ61 T $154,955 61 3 (18.7 m) Platform Height 51 3 (15.6 m) Horizontal Reach 170 Platform Rotation 36 x 96 (0.91 x 2.4 m) Platform Size SJ66 T $163,955 66 (20.1 m) Platform Height 5 Jib 57 (17.4 m) Horizontal Reach 170 Platform Rotation 36 x 96 (0.91 x 2.4 m) Platform Size Axle based 4WD system Detroit Locker type rear differential and limited slip front differential Oscillating axle 50% Gradeability Diesel or dual fuel engine Swing out engine tray Swing up cowlings Modular platform railing system Tri-entry sliding mid rails Direction sensing drive and steer controls Proportional controls Color coded and numbered wiring 360 continuous turret rotation Hourmeter All motion alarm Tie down/lifting lugs Wet disc SAHR brakes (front and rear axle) 15 x 19.5 grip lug air-filled tires Pipe rack... $850 Glazier kit... $965 Platform work lights...$830 36 x 72 Platform... N/C 3.5 kw generator... $5,085 (Includes hydraulic oil cooler) Welder ready package... $10,670 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, and welder mount) Welder package... $15,365 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, welder mount, and Lincoln V275-S welder) Cold weather start kit*... $2,360 *Recommended for regions where average monthly low temperatures can reach 14 F / -10 C (Includes cold start engine oil, battery blanket, hydraulic tank heater, and engine load kit (Deutz TD2.9L)) Arctic weather package*... $3,570 *Recommended for regions where average monthly low temperatures can reach -0.4 F / -18 C (Includes arctic engine oil, battery blanket, hydraulic tank heater, engine load kit (Deutz TD2.9L), block heater, arctic hydraulic oil, arctic platform rotator and arctic gear oil in the axles and swing drive. Glow plugs, arctic hydraulic hoses (all), and oversized foot switch cover are also included (standard equipment).) Hydraulic oil cooler... $1,765 Side gate... $315 Flashing light... $635 1/2 airline to platform... $670 Auxiliary top rail (36 x 96 platform only)... $955 Control box cover... $745 Positive air shut-off valve... $3,295 Secondary Guarding (electrical or mechanical)... $1,975 Tire Grip lug foam-filled tires... $5,015 High flotation air-filled tires... $9,000

TELESCOPIC BOOM LIFTS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ82 T $222,375 82 (24.99 m) Platform Height Dual Capacity 500 lbs (227 kg) / 1,000 lbs (455 kg) 72 6 (22.10 m) Horizontal Reach 170 Platform Rotation 36 x 96 (0.91 x 2.4 m) Platform Size SJ86 T $231,620 86 (26.21 m) Platform Height 5 Jib Dual Capacity 500 lbs (227 kg) / 750 lbs (341 kg) 76 10 (23.42 m) Horizontal Reach 170 Platform Rotation 36 x 96 (0.91 x 2.4 m) Platform Size Axle based 4WD system Operator controlled locking rear differential and limited slip front differential Oscillating axle Dual capacity rating 45% Gradeability Diesel engine Swing out engine tray Swing up cowlings Modular platform railing system Tri-entry sliding mid rails Direction sensing drive and steer controls Proportional controls Color coded and numbered wiring 360 continuous turret rotation Hourmeter All motion alarm Tie down points Wet disc SAHR brakes (front and rear axle) 18 x 625 grip lug foam filled tires Pipe rack... $850 Glazier kit... $965 Platform work lights...$830 36 x 72 Platform... N/C 3.5 kw generator... $5,085 (Includes hydraulic oil cooler) Welder ready package... $10,670 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, and welder mount) Welder package... $15,365 (Includes 12 kw generator, hydraulic oil cooler, 3-phase power connection in platform, welder mount, and Lincoln V275-S welder) Cold weather start kit*... $2,360 *Recommended for regions where average monthly low temperatures can reach 14 F / -10 C (Includes cold start engine oil, battery blanket, hydraulic tank heater, and engine load kit (Deutz TD2.9L)) Arctic weather package*... $3,570 *Recommended for regions where average monthly low temperatures can reach -0.4 F / -18 C (Includes arctic engine oil, battery blanket, hydraulic tank heater, engine load kit (Deutz TD2.9L), block heater, arctic hydraulic oil, arctic platform rotator and arctic gear oil in the axles and swing drive. Glow plugs, arctic hydraulic hoses (all), and oversized foot switch cover are also included (standard equipment).) Hydraulic oil cooler... $1,765 Flashing light... $635 1/2 airline to platform... $725 Hostile environment package... $5,160 (Includes cylinder bellows, boom wipers, covers for the fly boom cutouts, and control box cover) Auxiliary top rail (36 x 96 platform only)... $955 Control box cover... $745 Side gate... $315 Lifting lugs... $255 Positive air shut-off valve... $3,295 Secondary Guarding (electrical or mechanical)... $1,975 Tire Grip lug foam-filled non marking tires... $1,370

TELEHANDLER LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ643 TH $109,000 6,000 lbs (2,722 kg) Maximum lift capacity 43 4 (13.2 m) Maximum lift height 6,000 lbs (2,722 kg) Capacity @ maximum lift height 28 7 (8.7 m) Maximum forward reach 1,000 lbs (454 kg) Capacity @ maximum forward reach DPF & DEF Free Tier 4 Final 74 hp/221 lb-ft Deutz TCD 2.9L engine Powershift, 3 speed transmission 3 Mode steering 48 floating pin carriage with 48 pallet forks Auxiliary hydraulics Engine block heater Quick attach carriage mount Rear window with wiper Side window Suspension seat Single multifunction pilot operated joystick control In cab engine multifunction display Hydraulic test ports Lockable in cab storage box Fiberglass engine cowling Steel component and access covers Carriages 60" Floating Pin (In lieu of standard)... $665 72" Floating Pin (In lieu of standard)... $1,275 48" Floating Pin, Side Tilting (In lieu of standard)... $2,690 60" Floating Pin, Side Tilting (In lieu of standard)... $3,360 72" Floating Pin, Side Tilting (In lieu of standard)... $3,830 72" Swing Carriage (In lieu of standard)... $5,295 Closed Cab... $4,760 Air Conditioning (Closed Cab Only)... $3,170 Four Wheel Fenders... $1,740 Road Lights... $865 Work Lights... $895 Boom Lights... $325 Rotating Beacon... $295 Cold Weather Package... $835 (Includes cold start engine oil, battery blanket & hyd tank heater) Service Convienence Package... $255 (Includes remote axle grease points & clean drain oil valve) Posi-Air Shutoff Valve... $3,295 Reserve Brake System... $1,270 Pintle Hitch... $490 Non destructive testing... $1,170 Additional Attachments 2' High Capacity Jib Boom... $4,445 12' Truss Boom... $2,370 1.75 Cubic Yard Bucket... $4,000 Tire Foam Filled 13 x 24 Rough Terrain (In lieu of standard)... $4,485 Hard Surface 13 x 24 (In lieu of standard)... $2,430 Foam Filled 13 x 24 Hard Surface (In lieu of standard)... $6,915 Airless Solid Rubber 13 x 24 (In lieu of standard)... $9,520 Forks Pallet Forks, 2"x4"x60", 6,000lbs capacity (In lieu of standard)... $220 Pallet Forks, 2"x4"x48", 6,000lbs capacity (Additional set)... $1,000 Pallet Forks, 2"x4"x60", 6,000lbs capacity (Additional set)... $1,215 Pallet Forks, 2.25"x5"x48", 10,000lbs capacity (in lieu of std):... $495 Pallet Forks, 2.25"x5"x60", 10,000lbs capacity (in lieu of std):... $590 Pallet Forks, 2.25"x5"x48", 10,000lbs capacity (additional set):... $1,510 Pallet Forks, 2.25"x5"x60", 10,000lbs capacity (additional set):... $1,730 Block Forks, 6 of, 2"x1.5"x46", 9,000lbs capacity (in lieu of std):... $1,250 Block Forks, 6 of, 2"x1.5"x46", 9,000lbs capacity (additional set):. $2,610 This literature is for illustrative purposes only. Consult the Operating, Service and Parts manuals for proper procedures. Telehandler machine design complies with ANSI/ITSDF B56.6-2005 stability requirements for rough terrain forklifts. Specifications are nominal and subject to change without notice. Pricing is subject to change without notice. Option and Attachment pricing valid only with new equipment purchases.

TELEHANDLER LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ843 TH $118,490 8,000 lbs (3,629 kg) Maximum lift capacity 43 4 (13.2 m) Maximum lift height 6,000 lbs (2,722 kg) Capacity @ maximum lift height 28 7 (8.7 m) Maximum forward reach 1,900 lbs (862 kg) Capacity @ maximum forward reach 2 x4 x48 Forks DPF & DEF Free Tier 4 Final 74 hp/221 lb-ft Deutz TCD 2.9L engine Powershift, 3 speed transmission 3 Mode steering 48 floating pin carriage with 48 pallet forks Auxiliary hydraulics Engine block heater Quick attach carriage mount Rear window with wiper Side window Suspension seat Single multifunction pilot operated joystick control In cab engine multifunction display Hydraulic test ports Lockable in cab storage box Fiberglass engine cowling Steel component and access covers Carriages 60" Floating Pin (In lieu of standard)... $665 72" Floating Pin (In lieu of standard)... $1,275 48" Floating Pin, Side Tilting (In lieu of standard)... $2,690 60" Floating Pin, Side Tilting (In lieu of standard)... $3,360 72" Floating Pin, Side Tilting (In lieu of standard)... $3,830 72" Swing Carriage (In lieu of standard)... $5,295 Closed Cab... $4,760 Air Conditioning (Closed Cab Only)... $3,170 Four Wheel Fenders... $1,740 Road Lights... $865 Work Lights... $895 Boom Lights... $325 Rotating Beacon... $295 Cold Weather Package... $835 (Includes cold start engine oil, battery blanket & hyd tank heater) Service Convienence Package... $255 (Includes remote axle grease points & clean drain oil valve) Posi-Air Shutoff Valve... $3,295 Reserve Brake System... $1,270 Pintle Hitch... $490 Non destructive testing... $1,170 Additional Attachments 2' High Capacity Jib Boom... $4,445 12' Truss Boom... $2,370 1.75 Cubic Yard Bucket... $4,000 Tire Foam Filled 13 x 24 Rough Terrain (In lieu of standard)... $4,485 Hard Surface 13 x 24 (In lieu of standard)... $2,430 Foam Filled 13 x 24 Hard Surface (In lieu of standard)... $6,915 Airless Solid Rubber 13 x 24 (In lieu of standard)... $9,520 Forks Pallet Forks, 2"x5"x60", 8,000lbs capacity (In lieu of standard)... $220 Fully Tapered Forks, 1.75"x7"x48", 10,000lbs capacity... $740 (In lieu of standard) Pallet Forks, 2"x5"x48", 8,000lbs capacity (Additional set)... $1,090 Pallet Forks, 2"x5"x60", 8,000lbs capacity (Additional set)... $1,310 Fully Tapered Forks, 1.75"x7"x48", 10,000lbs capacity... $1,830 (Additional set) Pallet Forks, 2.25"x5"x48", 10,000lbs capacity (in lieu of std):... $495 Pallet Forks, 2.25"x5"x60", 10,000lbs capacity (in lieu of std):... $590 Pallet Forks, 2.25"x5"x48", 10,000lbs capacity (additional set):... $1,510 Pallet Forks, 2.25"x5"x60", 10,000lbs capacity (additional set):... $1,730 Block Forks, 6 of, 2"x1.5"x46", 9,000lbs capacity (in lieu of std):... $1,250 Block Forks, 6 of, 2"x1.5"x46", 9,000lbs capacity (additional set):. $2,610 This literature is for illustrative purposes only. Consult the Operating, Service and Parts manuals for proper procedures. Telehandler machine design complies with ANSI/ITSDF B56.6-2005 stability requirements for rough terrain forklifts. Specifications are nominal and subject to change without notice. Pricing is subject to change without notice. Option and Attachment pricing valid only with new equipment purchases.

TELEHANDLER LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ1044 TH $134,410 10,000 lbs (4,535 kg) Maximum lift capacity 44 3 (13.49 m) Maximum lift height 7,000 lbs (3,175 kg) Capacity @ maximum lift height 8,000 lbs (3,629 kg) Capacity @ maximum lift height with optional outriggers 29 6 (9.0 m) Maximum forward reach 1,800 lbs (816 kg) Capacity @ maximum forward reach 4,700 lbs (2,132 kg) Capacity @ maximum forward reach with optional outriggers 2.25 x5 x48 Forks DPF & DEF Free Tier 4 Final 74 hp/287 lb-ft Deutz TCD 3.6L engine Powershift, 3 speed transmission 3 Mode steering 48 floating pin carriage with 48 pallet forks Auxiliary hydraulics Engine block heater Quick attach carriage mount Rear window with wiper Side window Suspension seat Single multifunction pilot operated joystick control In cab engine multifunction display Hydraulic test ports Lockable in cab storage box Fiberglass engine cowling Steel component and access covers Carriages 60" Floating Pin (In lieu of standard)... $665 72" Floating Pin (In lieu of standard)... $1,275 48" Floating Pin, Side Tilting (In lieu of standard)... $2,690 60" Floating Pin, Side Tilting (In lieu of standard)... $3,360 72" Floating Pin, Side Tilting (In lieu of standard)... $3,830 72" Swing Carriage (In lieu of standard)... $5,295 Forks Pallet Forks, 2.25"x5"x60", 10,000lbs capacity (In lieu of standard)... $220 Pallet Forks, 2.25"x5"x72", 10,000lbs capacity (In lieu of standard)... $630 Fully Tapered Forks, 1.75"x7"x48", 10,000lbs capacity... $320 (In lieu of standard) Block Forks, (set of 6) 2 x1.5 x45, 9,000lbs capacity... $1,100 (In lieu of standard) Pallet Forks, 2.25"x5"x48", 10,000lbs capacity (Additional set)... $1,510 Pallet Forks, 2.25"x5"x60", 10,000lbs capacity (Additional set)... $1,730 Pallet Forks, 2.25"x5"x72", 10,000lbs capacity (Additional set)... $2,140 Fully Tapered Forks, 1.75"x7"x48", 10,000lbs capacity... $1,830 (Additional set) Block Forks, (set of 6) 2 x1.5 x45, 9,000lbs capacity... $2,610 (Additional set) Axle mount outriggers... $11,090 Closed Cab... $4,760 Air Conditioning (Closed Cab Only)... $3,170 Four Wheel Fenders... $1,740 Road Lights... $865 Work Lights... $895 Boom Lights... $325 Rotating Beacon... $295 Cold Weather Package... $835 (Includes cold start engine oil, battery blanket & hyd tank heater) Service Convienence Package... $255 (Includes remote axle grease points & clean drain oil valve) Posi-Air Shutoff Valve... $3,295 Reserve Brake System... $1,270 Pintle Hitch... $490 Non destructive testing... $1,170 Optional Engine 107hp Deutz TCD3.6L... $5,975 Additional Attachments 2' High Capacity Jib Boom... $4,445 12' Truss Boom... $2,370 15' Truss Boom... $2,940 1.75 Cubic Yard Bucket... $4,000 Tire Foam Filled 14 x 24 Rough Terrain (In lieu of standard)... $5,455 Airless Solid Rubber 13 x 24 (In lieu of standard)... $9,520 This literature is for illustrative purposes only. Consult the Operating, Service and Parts manuals for proper procedures. Telehandler machine design complies with ANSI/ITSDF B56.6-2005 stability requirements for rough terrain forklifts. Specifications are nominal and subject to change without notice. Pricing is subject to change without notice. Option and Attachment pricing valid only with new equipment purchases.

TELEHANDLER LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 SJ1056 TH $152,130 10,000 lbs (4,535 kg) Maximum lift capacity 56 3 (17.1 m) Maximum lift height 4,000 lbs (1,814 kg) Capacity @ maximum lift height 6,000 lbs (2,722 kg) Capacity @ maximum lift height with outriggers down 42 6 (12.95 m) Maximum forward reach 400 lbs (181 kg) Capacity @ maximum forward reach 3,000 lbs (1,361 kg) Capacity @ maximum forward reach with outriggers down 2.25 x5 x48 Forks DPF & DEF Free Tier 4 Final 74 hp/287 lb-ft Deutz TCD 3.6L engine Powershift, 3 speed transmission 3 Mode steering 48 floating pin carriage with 48 pallet forks Axle mount outriggers Auxiliary hydraulics Engine block heater Quick attach carriage mount Rear window with wiper Side window Suspension seat Single multifunction pilot operated joystick control In cab engine multifunction display Hydraulic test ports Lockable in cab storage box Fiberglass engine cowling Steel component and access covers Carriages 60" Floating Pin (In lieu of standard)... $665 72" Floating Pin (In lieu of standard)... $1,275 48" Floating Pin, Side Tilting (In lieu of standard)... $2,690 60" Floating Pin, Side Tilting (In lieu of standard)... $3,360 72" Floating Pin, Side Tilting (In lieu of standard)... $3,830 72" Swing Carriage (In lieu of standard)... $5,295 Forks Pallet Forks, 2.25"x5"x60", 10,000lbs capacity (In lieu of standard)... $220 Pallet Forks, 2.25"x5"x72", 10,000lbs capacity (In lieu of standard)... $630 Fully Tapered Forks, 1.75"x7"x48", 10,000lbs capacity... $320 (In lieu of standard) Block Forks, (set of 6) 2 x1.5 x45, 9,000lbs capacity... $1,100 (In lieu of standard) Pallet Forks, 2.25"x5"x48", 10,000lbs capacity (Additional set)... $1,510 Pallet Forks, 2.25"x5"x60", 10,000lbs capacity (Additional set)... $1,730 Pallet Forks, 2.25"x5"x72", 10,000lbs capacity (Additional set)... $2,140 Fully Tapered Forks, 1.75"x7"x48", 10,000lbs capacity... $1,830 (Additional set) Block Forks, (set of 6) 2 x1.5 x45, 9,000lbs capacity... $2,610 (Additional set) Closed Cab... $4,760 Air Conditioning (Closed Cab Only)... $3,170 Four Wheel Fenders... $1,740 Road Lights... $865 Work Lights... $895 Boom Lights... $325 Rotating Beacon... $295 Cold Weather Package... $835 (Includes cold start engine oil, battery blanket & hyd tank heater) Service Convienence Package... $255 (Includes remote axle grease points & clean drain oil valve) Posi-Air Shutoff Valve... $3,295 Reserve Brake System... $1,270 Pintle Hitch... $490 Non destructive testing... $1,170 Optional Engine 107hp Deutz TCD3.6L... $5,975 Additional Attachments 2' High Capacity Jib Boom... $4,445 12' Truss Boom... $2,370 15' Truss Boom... $2,940 1.75 Cubic Yard Bucket... $4,000 Tire Foam Filled 14 x 24 Rough Terrain (In lieu of standard)... $5,455 Airless Solid Rubber 13 x 24 (In lieu of standard)... $9,520 This literature is for illustrative purposes only. Consult the Operating, Service and Parts manuals for proper procedures. Telehandler machine design complies with ANSI/ITSDF B56.6-2005 stability requirements for rough terrain forklifts. Specifications are nominal and subject to change without notice. Pricing is subject to change without notice. Option and Attachment pricing valid only with new equipment purchases.

TELEHANDLER LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 ZB2044 $342,025 20,000 lbs (9,072 kg) Maximum lift capacity 44 10 (13.7 m) Maximum lift height 12,000 lbs (5,443 kg) Capacity @ maximum lift height 27 5 (8.4 m) Maximum forward reach 7,000 lbs (3,175 kg) Capacity @ maximum forward reach Cummins T4F QSB4.5C, turbocharged and charge-air-cooled diesel, 163hp @ 2500 rpm Powershift, 3 speed transmission 3 Mode steering 72 floating pin carriage with 60 pallet forks Outriggers Rear axle Stable-Lock cylinder with backup accumulator Standard quick attach carriage mount system Auxiliary hydraulic group for boom attachments Dual lift cylinders High pivot boom mount design ROPS/FOPS certified cab Rear window and side screen Lockable under cab storage compartment / step Adjustable suspension seat with seat belt Dual joystick pilot operated controls for boom and frame level functions Tilt adjustable joystick console Gauge instrumentation Electronic powerview engine monitor/gauge Lockable steel swing up engine doors Engine grid heater Dual element air cleaner with flow restriction indicator Dual batteries Independent front/rear brake systems Dual brake accumulators for dead engine braking Brake activated transmission disconnect 55 gallon (208 L) steel hydraulic tank 49 gallon (185 L) steel fuel tank Horn and backup alarm Mirrors, right and left side Remote grease fittings for axle trunnion mount lubrication Easy to remove steel component and access covers Operator/maintenance and parts manuals 12 months/2000 hour warranty (4 years on structure) Carriages 72 Dual Hydraulic Fork Positioner (In lieu of standard)... $3,960 84 Dual Hydraulic Fork Positioner (In lieu of standard)... $4,665 72 Side Shift Carriage and Dual Hydraulic Fork Positioner... $8,330 (In lieu of standard) 84 Side Shift Carriage and Dual Hydraulic Fork Positioner... $8,840 (In lieu of standard) Forks 2 3/4 x 6 x 72 Forks (In lieu of standard)... $370 2 3/4 x 6 x 96 Forks (In lieu of standard)... $1,335 2 3/4 x 6 x 60 Forks (Additional set)... $3,630 2 3/4 x 6 x 72 Forks (Additional set)... $3,885 2 3/4 x 6 x 96 Forks (Additional set)... $4,660 Flashing Beacon Light... $350 Lighting Kit w/ Guards 2 Front white / 2 Rear Red... $650 Front and Rear Turn Signals w/ Flashers... $600 Extra Operating Light with Guard... $245 Boom Mounted Operating Lights... $510 Front and Rear Fenders... $3,015 Fully Enclosed Operator Cab,... $7,535 (Includes sound insulation, heater, defroster, dome light, front and top windshield wiper) Air Conditioning requires enclosed cab option... $5,625 Mine Package... $16,370 (Includes backup braking & steering systems, drive shaft covers) Posi-Air Shutoff Valve... $3,295 Non destructive testing... $1,170 Additional Attachments 5 ft Jib Boom (20,000 lbs Capacity)... $12,655 2.0 Cu. Yd. Light Material Handling Bucket... $5,135 Hydraulic Winch (15,000 lbs Capacity)... $11,615 Pipe and Pole Clamp... $30,830 Rotating Pipe and Pole Manipulator... $35,965 Bridge Stripper... $8,835 Tire Foam Filled Tires... $6,835 This literature is for illustrative purposes only. Consult the Operating, Service and Parts manuals for proper procedures. Telehandler machine design complies with ANSI/ITSDF B56.6-2005 stability requirements for rough terrain forklifts. Specifications are nominal and subject to change without notice. Pricing is subject to change without notice. Option and Attachment pricing valid only with new equipment purchases.

EXTENDED WARRANTY PLANS LIST PRICING (USD) EFFECTIVE JANUARY 1ST, 2017 EXTENDED WARRANTY PLANS FOR NEW EQUIPMENT ONLY* LIST PRICING 2 years / 3000 hours 3 years / 4000 hours 5 years / 5000 hours SJ12, SJ16 n/c $515 $855 SJIII 3215, 3219 n/c $515 $855 SJIII 3220, 3226, 4626, 4632, 4740 n/c $745 $1,240 SJ6826 RT, 6832 RT, 6832 RTE n/c $1,700 $2,830 SJ8831 RT, 8841 RT n/c $2,625 $4,370 SJ9250 RT n/c $3,395 $5,655 SJ30 AJE, SJ30 ARJE n/c $2,535 $4,220 SJ46 AJ n/c $3,240 $5,400 SJ63 AJ n/c $4,750 $7,920 SJ40 T, SJ45 T n/c $3,500 $5,915 SJ61 T, SJ66 T n/c $4,835 $8,175 SJ82 T, SJ86 T n/c $6,835 $11,565 SJ643 TH n/c $6,475 $10,795 SJ843 TH n/c $6,775 $11,205 SJ1044 TH, SJ1056 TH n/c $7,920 $13,310 ZB2044 n/c $14,775 $24,615 *TERMS AND CONDITIONS: Extended warranty applies to new machines only and follows the standard warranty policy and procedure for the machine(s) purchased. Extended warranties must be purchased at point of machinery purchase and may not be applied to units that have entered service. SKYJACK STANDARD WARRANTY POLICY SKYJACK INC., warrants that each new aerial work platform ( AWP ) will be free of defective parts and workmanship for two years (24 months or 3,000 hours, whichever comes first) from the date the product was invoiced to the purchaser or from the date the product was first put into service, whichever comes first. For the following 36 months, structural components found to be defective will be replaced or repaired at no charge. For further clarity AWP Products include Scissor lifts and Boom Lifts.* SKYJACK INC., warrants that each new Telehandler manufactured by Skyjack Inc. will be free of defective parts and workmanship for two years (24 months or 3,000 hours, whichever comes first) from the date the product was invoiced to the purchaser or from the date the product was first put into service, whichever comes first. For the following 36 months structural components found to be defective will be replaced or repaired at no charge.* All warranty claims are subject to approval by Skyjack s Service Department. Skyjack Inc. reserves a right to limit or adjust claims with regard to defective parts, labor or travel time based on usual and customary guidelines. Parts purchased from sources other than Skyjack will not be covered under this warranty. Misuse or improper operation, lack of normal maintenance and inspections as outlined in the Operating Manual, Parts Manual or Service Manual, alterations to original designs and/or components or accidents will void all warranty. Batteries, wear items and engines are not covered by this warranty. Any claims, should refer to the manufactures warranties. Electrical failures due to loose wiring, corrosion & poor maintenance are not covered by this warranty. *SKYJACK INC. will repair or replace, at it s option, the defective part or workmanship at its factory or authorized service center. The above warranty statement is exclusive and no other warranty whether written, oral or implied shall apply. Skyjack Inc. excludes any implied warranty of merchantability and fitness and accepts no liability for consequential damages or for others negligence.