SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS

SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS

SÜDMO HYGIENIC CENTRIFUGAL PUMPS Designed for continuous operation on thin liquids (milk, wine, cream, beer, wort, etc.). These pumps are suitable for liquids with viscosity up to 500 mpa.s. FEATURES TECHNICAL DATA MATERIALS Standard electric motors available Available in accordance with ATEX CE Ex IIG c T3/T4 Standard mechanical seals acc. EN 12756 available Hygienic construction Favorable NPSH Low noise Easy and low cost maintenance High efficiency and capacities up to 200 m 3 /h and discharge pressures up to 13 bar Suitable for CIP Wide variety on available options such as heating jackets, frequency controllers, flushed seal, etc. Available with unions, plane ends or flanges Designed and certified in accordance with EHEDG recommendations Product friendly treatment Inspection certificate «type 3.1» according to DIN EN10204 available on request Motors 0.75 kw up to 55 kw Temperature 140 C Higher temperature seals on request Connections standard male part acc. DIN 11851 Other connections SMS, RJT, BS, Tri-clamp DIN 11864 (EHEDG), IDF or flange can be provided According European Directive 1935/2004 Wetted parts 1.4404 (AISI 316 L) Other parts 1.4301 (AISI 304) Seals Mechanical CS-SiC, SiC-SiC Elastomers NBR, FKM, EPDM, PTFE Other seal materials on request Double mechanic seals and flushed mechanic seals available FDA licensed 2

SEAL CONFIGURATIONS Single working internal mechanical seal Double working internal mechanical seal with quench (unpressurized cooling liquid) Single working external mechanical seal Double working external mechanical seal back to back (pressurized cooling liquid) HYGIENIC PUMPS 3

HP SERIES Application Designed for applications where high demands for smooth product handling and continuous operation are required. G M B D2 E1 ±10 D1 A L Standard 3A E2 ±10 K C H1/H2 J1/J2 F E1 E2 H1/J1 H2/J2 Standard 3A Single acting mechanical seal Double acting mechanical seal OVERALL DIMENSIONS Motor IEC Motor kw E1 E2 F G H1 H2 J1 J2 K L 71 0.37 / 0.55 130 191 103 154 48 74 170 195 112 155 80 0.75 / 1.1 160 200 77 210 76 102 215 240 125 160 90S 1.5 170 210 126 210 86 102.5 221 256 140 185 90L 2.2 170 210 101 210 86 102.5 246 281 140 185 100L 3 180 230 144 260 98 108 268 310 160 245 112 4 190 242 137 260 98 108 275 317 190 233 132S 5.5 / 7.5 210 262 213 310 118 108 294 356 216 253 132M 9.2 210 262 175 310 118 108 332 394 216 253 160M 11 / 15 240 290 289 364 150.5 107.5 383 477 254 297 160L 18.5 240 290 245 364 150.5 107.5 427 521 254 297 180M 22 260 310 305 374 150.5 107.5 427 521 279 317 200L 30 / 37 280 330 339 418 150.5 107.5 503 597 318 347 225S 45 305 360 402 496 150.5 107.5 500 594 356 435 OVERALL DIMENSIONS D1 D2 Pump OD-Tube Metric OD-Tube Metric A B C M HP 0215 1.5 40 1.0 25 93 30 42.0 61 HP 0715 1.5 40 1.0 25 119 55 72.0 70 HP 1515 2.0 50 1.5 40 162 55 74.5 70 HP 1232 2.0 50 1.5 40 172 70 89.5 90 HP 2532 2.5 65 2.0 50 188 70 91.5 90 HP 5032 3.0 80 2.5 65 200 70 95.5 90 HP 8032 4.0 100 3.0 80 215 70 105.0 90 HP 1250 2.0 50 1.5 40 187 70 89.5 105 HP 1251 2.0 50 1.5 40 187 70 89.5 105 HP 2550 2.5 65 2.0 50 203 70 93.0 105 HP 5050 3.0 80 2.5 65 220 70 98.0 105 HP 8050 4.0 100 3.0 80 220 70 101.5 105 HP 1280 2.0 50 1.5 40 197 70 89.0 130 HP 2580 2.5 65 2.0 50 213 70 91.5 130 HP 5080 3.0 80 2.5 65 240 70 97.5 130 HP 8080 4.0 100 3.0 80 240 70 100.5 130 4

HP SERIES Design The HP pump range is a solid stainless steel construction to meet the stringent international regulations in the various fields of hygienic requirements offering: Open impeller design Favorable NPSH EHEDG APPROVED According ATEX CE Ex IIG c T3 Duty Discharge pressure Up to 90 m Flow rates Up to 130 m 3 /hour Temperatures Maximum 140 C Higher temperatures on request Impeller HP Series - Polished 1500 RPM 3000 RPM 1800 RPM 3600 RPM HYGIENIC PUMPS 5

HP-Z SERIES Application The design is suitable for CIP and scavenge applications. Additionally the pump can be applied on venting of suction lines and the handling of entrained air. D2 M L A D1 K E1 ±10 C H1/ H2 Standard J F 3A E2 ±10 E1 E2 H1 H2 Standard 3A Single acting mechanical seal Double acting mechanical seal OVERALL DIMENSIONS Motor Motor IEC kw E1 E2 F G H1 H2 J K L 80 0.75 / 1.1 190 210 317 210 51.5 102.5 240 / 240 125 160 90 1.5 / 2.2 200 205 382 210 51.5 102.5 256 / 281 140 185 100 3 185 215 454 260 56.5 107.5 310 160 233 112 4 190 225 454 260 56.5 107.5 317 190 233 132 5.5 / 7.5 / 9.2 210 245 569 310 56.5 107.5 356 / 356 / 394 216 253 160 11 / 15 / 18.5 240 280 766 364 56.5 107.5 477 / 477 / 521 254 297 180 22 260 300 826 374 56.5 107.5 521 279 317 200 30 280 320 936 418 56.5 107.5 597 / 597 318 347 225S 45 305 350 996 496 56.5 107.5 594 356 435 OVERALL DIMENSIONS D1 D2 Pump OD-Tube Metric OD-Tube Metric A B C M N HP-Z 1232 2.0 50 1.5 40 310 215 252 254 275 HP-Z 5032 3.0 80 2.5 65 310 275 316 254 295 HP-Z 2550 2.5 65 2.0 50 340 250 290 270 320 HP-Z 8050 4.0 100 3.0 80 380 308 355 270 340 HP-Z 8080 4.0 100 3.0 80 380 307 354 270 390 6

HP-Z SERIES Design The HP-Z self priming pump is specifically designed for handling entrained air at high capacities. The impeller is of open construction and all wetted parts are constructed with stainless steel (DIN 1.4404/316L). Duty Discharge pressure Up to 60 m Flow rates Up to 130 m 3 /hour Temperatures Maximum 140 C Higher temperatures on request Impeller HP-Z Series 1500 RPM 3000 RPM 1800 RPM 3600 RPM HYGIENIC PUMPS 7

ORDER FORM Designing pumps requires exact specifications, so thanks for giving us as much detailed information as possible. CUSTOMER DATA Customer Customer No. Address Email Phone Project Name/No. PUMP DATA Capacity [m³/h] Pump Head [mwc] Product Product Temperature [ C] Density [kg/m³] Viscosity [Pas] Kind of Application Pump Location on Site Site Elevation (Height above Sea Level) [m] Pump must be Self-Priming [yes/no] Port Connections (Standard: Metric DN 11851 SC Threaded Male) Voltage [V] Frequency [Hz] PTC Sensor Required [yes/no] Ex-Proof Required [yes/no] Ex-Proof Classification Trolley required [yes/no] Heating/Cooling Jacket Required [yes/no] Drain Required [yes/no] Shroud Required [yes/no] MECHANICAL SEAL AND GASKET MATERIALS Single (Standard) or Double Mechanical Seal If Single: Internal (Standard) or External Mech. Seal If Double: Buffer Liquid Pressureless or Pressurized Primary Seal Material: Carbon/SIC (Standard) / SIC/SIC / Others Secondary Seal Material: (if Case of Double Mech. Seal): Carbon/SIC (Standard) / SIC/SIC / Others Pump Gasket: EPDM (Standard) / FKM (Viton) / NBR You can either fax the form to: +49 9081 803 154 or send it via email to: info.suedmo@pentair.com PENTAIR SÜDMO GMBH INDUSTRIESTRASSE 7, 73469 RIESBÜRG, GERMANY WWW.SUEDMO.DE All Pentair trademarks and logos are owned by Pentair. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. ID-No.: 2222521- Hyg. Centrifugal Pumps E-1/15 2015 Pentair - All Rights Reserved.