715 mhp (705 bhp) 526 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 11.95 L (729.23 in 3 ) Rated Speed... 2300 Bore... 130.0 mm (5.12 in) Stroke... 150.0 mm (5.91 in) Aspiration... TA Governor... Electronic Cooling System... Heat Exchanger Weight, Net Dry (approx.)... 1,175 kg (2,590 lb) Refill Capacity Cooling System...45.0 L (11.9 gal) Lube Oil System... 28.0 L (7.4 gal) Oil Change Interval... 250 hrs Caterpillar Diesel Oil 10W30 or 15W40 Center Sump Oil Pan Rotation (from flywheel end)... CCW Flywheel and Flywheel Housing...SAE NO. 1 Flywheel Teeth...113 STANDARD ENGINE EQUIPMENT Air Inlet System Corrosion resistant sea water aftercooler; air cleaner/fumes disposal system (closed) Cooling System Self priming gear driven sea water pump with rubber impeller, gear driven jacket water pump, integral heat exchanger/expansion tank with removable tube bundle and replaceable copper-nickel tubes, thermostat and housing Exhaust System Watercooled exhaust manifold and turbocharger, round flanged outlet Fuel System Fuel priming pump, fuel transfer pump, fuel filter - RH or LH service, flexible fuel lines Instrumentation Electric service meter Lube System Crankcase breather, engine oil cooler; oil filter - RH or LH service, oil level gauge - RH or LH service, oil filler, center sump oil pan, gear driven oil pump Mounting System Front support Power Takeoffs 11 tooth spline SAE A hydraulic pump drive, single groove craknshaft pulley Protection System 12 or 24 volt electronic shutdown (energized-to-run) General Vibration damper and guard, Caterpillar yellow paint, lifting eyes, variable engine wiring, customer wiring connector and service tool connector ISO Certification Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities 1 9 November 2006 3:37 AM
PERFORMANCE CURVES E-RATING - DM9099-00 Power kw Metric Torque N m Maximum Power Prop Demand - - - - - - - g/kw-hr Maximum Power Data Torque N m Power kw g/kw-hr L/hr 2300 526 2184 220.3 138.1 2200 526 2283 214.6 134.6 2100 526 2392 210.5 132.0 2000 526 2511 208.4 130.6 1900 526 2644 208.5 130.7 1800 526 2791 209.6 131.4 1700 526 2955 210.9 132.2 1600 506 3020 212.3 128.1 1500 470 2992 215.1 120.5 1400 389 2653 217.9 101.0 1300 278 2042 219.2 72.6 1200 193 1536 219.5 50.5 1100 155 1346 220.1 40.7 1000 130 1241 223 34.6 900 108 1146 227.9 29.3 700 70 955 242.6 20.2 Power kw Prop Demand Data Torque N m g/kw-hr L/hr 2300 526 2184 220.3 138.1 2200 460.3 1998 212.5 116.6 2100 400.4 1821 207.1 98.8 2000 345.9 1651 204 84.1 1900 296.5 1490 202.7 71.7 1800 252.1 1338 202.7 60.9 1700 212.4 1193 203.4 51.5 1600 177.1 1057 205.1 43.3 1500 145.9 929 207.9 36.2 1400 118.6 809 210.9 29.8 1300 95 698 213.9 24.2 1200 74.7 594 217 19.3 1100 57.5 500 220.6 15.1 1000 43.2 413 226.6 11.7 900 31.5 334 237.2 8.9 700 14.8 202 273.5 4.8 NOTE: Prop demand data is a cubic prop demand curve with 3.0 exponent for displacement hulls only. 2 9 November 2006 3:37 AM
PERFORMANCE CURVES E-RATING - DM9099-00 Power hp English Torque lb ft Maximum Power Prop Demand - - - - - - - lb/hp-hr Maximum Power Data Torque lb ft Power hp lb/hp-hr gph 2300 705 1611.362 36.5 2200 705 1684.353 35.6 2100 705 1764.346 34.9 2000 705 1852.343 34.5 1900 705 1950.343 34.5 1800 705 2059.345 34.7 1700 705 2179.347 34.9 1600 679 2227.349 33.8 1500 630 2207.354 31.8 1400 522 1957.358 26.7 1300 373 1506.360 19.2 1200 259 1133.361 13.3 1100 208 993.362 10.8 1000 174 915.367 9.1 900 145 845.375 7.7 700 94 704.399 5.3 Power hp Prop Demand Data Torque lb ft lb/hp-hr gph 2300 705 1611.362 36.5 2200 617 1474.349 30.8 2100 537 1343.340 26.1 2000 464 1218.335 22.2 1900 398 1099.333 18.9 1800 338 987.333 16.1 1700 285 880.334 13.6 1600 237 780.337 11.4 1500 196 685.342 9.6 1400 159 597.347 7.9 1300 127 515.352 6.4 1200 100 438.357 5.1 1100 77 369.363 4.0 1000 58 305.373 3.1 900 42 246.390 2.4 700 20 149.450 1.3 NOTE: Prop demand data is a cubic prop demand curve with 3.0 exponent for displacement hulls only. 3 9 November 2006 3:37 AM
RATING DEFINITIONS AND CONDITIONS E Rating (High Performance) - % Load Factor: up to 30 % Time at Rated RPM: up to 8 Typical Time at Full Load: 1/2 hours out of 6 Typical Hour/Year: 250 to 1000 Typical Applications: For vessels operating at rated load and rated speed up to 8% of the time (up to 30% load factor). Typical applications could include but are not limited to vessels such as pleasure craft, harbor patrol boats, harbor master boats, some fishing or patrol boats. Typical operation ranges from 250 to 1000 hours per year. Power at declared engine speed is in accordance with ISO3046-1:2002E. Caterpillar maintains ISO9001:1994/QS-9000 approved engine test facilities to assure calibration of test equipment. Electronically controlled engines are set at the factory at the advertised power corrected to standard ambient conditions. The published fuel consumption rates are in accordance with ISO3046-1. Fuel rates are based on fuel oil of 35 API [16 C (60 F)] gravity having an LHV of 42 780 kj/kg (18,390 Btu/lb) when used at 29 C (85 F) and weighing 838.9 g/l (7.001 lb/u.s. gal). Additional ratings may be available for specific customer requirements. Consult your Caterpillar representative for additional information. Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of comparison with other manufacturer's engines. Actual engine performance may vary according to the particular application of the engine and operating conditions beyond Caterpillar's control. Power produced at the flywheel will be within standard tolerances up to 49º C (120º F) combustion air temperature measured at the air cleaner inlet, and fuel temperature up to 52º C (125ºF) measured at the fuel filter base. Power rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft power. 4 9 November 2006 3:37 AM
DIMENSIONS Right Side Front Dimensions (1) Length to Flywheel Housing 1573.9 mm 61.96 in (2) Width 968.6 mm 38.13 in (3) Height 1008.7 mm 39.71 in Weight, Net Dry (approx) 1175 kg 2,590 lb Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2479677 ). 5 9 November 2006 3:37 AM
Performance No.: DM9099-00 Feature Code: C12DM41 U.S. Sourced 8223656 9 November 2006 2006 Caterpillar All rights reserved. Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. 6