Direct intervention electropilots with poppet valve system and bottom cushioned ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (360 ) separated from mechanical part Versions: 2/2 3/2 NC NO Original Univer SPEED modular subbase TECHNICL CHRCTERISTICS mbient temperature Fluid temperature Fluid Coutation system Ways/Positions Pressure Control Return Connections Nominal Ø () Nominal flow rate (Nl/min) 10 +50 C max +95 C filtered air 10 μm, lubricated or not (upon request other fluids can be used) direct intervention poppet valve system with cushioned,, (a) 2/2, = 0 10 = 3 10 electric mechanical spring on subbase or with threaded connections on the body subbase G 1/8 M5 CNOMO 1,6 6 92 150 100 95 650 92 110 1 CONSTRUCTIVE CHRCTERISTICS Materials ELECTRIC CHRCTERISTICS see features below Electropilots Series Coil Power consumption Connector Voltage DB 11W (DC) 10 V (C) M 5111 12 V DC 24 V DC 24 V C 110 V C 230 V C For other electric features see section ccessories>coils (a) = Mechanical part designed to keep the air supply always from the body (Useful in case of assembly of more NCNO pilots in series to have a unique supply port) 1_15
Sleeves with moving core (a) Exhaust Ø Pressure bar 3 10 cores and springs Weight Kg 0,060 0,060 0,060 0,070 0600 0613 0640 0643 Upon request viton and s (only NC options) NC NO Detail of machining Wrench 22 Locking rings for coils on s Version 1 = radial exhausts 2 = radial exhausts 3 = open exhausts Suitable for s Material technopolymer technopolymer brass Coil M5212 M5214 M5212B 1 2 3 In order to convey exhausts, use version 3 Standard manual s with electropilots Functionig 1 = with 2 position screw 2 = with impulse 12 position screw 3 = with button with tool 4 = with button, 1 position Suitable for s all NC electropilots that can use manual only CNOMO NC electropilots only CNOMO NC electropilots NO 3/2 electropilots / M5203(b) 1 2 3 4 (a) = Suitable for subbases with diameter from 3 6 (b) = Mounted on the = with 2 position screw = with button with tool 1_16
2/2 3/2 Electropilot for assembling on subbase zamak 0,125 1 2 2 3 150 160 En. Deen. 0681 150 160 0687 130 13 0722 B 130 92 148 13 14 10 (e) 0728 0685 B ISO 4762 3 = Exhaust Subbase: SPEED. vailable upon request: other inner diameters. 2/2 3/2 G1/8 Electropilot zamak 0,145 Electropilots 1 1 2 2 3 En. Deen. 0751 0757 12 0765 12 0771 100 150 14 11 vailable upon request: other inner diameters. (e) 0755 3 = Exhaust = close the exhaust of the electropilot to get the 2/2 NO one. (d) = the Ø shown on the 3/2 valves refers to the exhhaust. (e) = manual on M5203 ring nut Electropiltots are supplied without coil, connector and locking ring = with 2 position screw. 1_17
3/2 G1/4 Electropilot brass\ 0,225 1 2 2 3 Ecc. Dis. 200 13 11 0822 95 160 12 10 (e) 0819 Suitable for use with nonaggressive liquids. Upon request: body and. 2/2 G1/4 Electropilot 3 = Exhaust brass 0,220 1,6 2 3 3,5 4 4,5 5 5,5 6 Flow rate (Nl/min) 108 165 280 350 450 500 550 600 650 Pressure bar 0 30 0 20 0 15 0 9 0 8 0 7 0 6,5 0 6 0 5 En. Deen 6 9 11 12 10 13 13 16 21 29 0824 0825 0826 0827 0828 0829 0830 0831 0832 0833 Suitable for use with nonaggressive liquids. Coil 17 V Voltage 24V C 50/60 Hz DB0607 110V C 50/60 Hz DB0608 220V C 50/60 Hz DB0610 1_18 = close the exhaust of the electropilot to get the 2/2 NO one. (d) = the Ø shown on the 3/2 valves refers to the exhhaust. (e) = manual on M5203 ring nut Electropiltots are supplied without coil, connector and locking ring = with 2 position screw.
CNOMO 2/2 3/2 Electropilot for mounting on subbases SPEED technopolymer 0, 1 2 2 3 En. Deen. 110 170 13 12 0885 115 12 0886 92 148 0888 Subbase: SPEED. vailable upon request: brass (without manual ). Zamak. Stainless steel other inner diameters. 13 10 (e) B Modular subbase SPEED series G1/8 Override manual B ISO 4762 3 = Exhausts Electropilots 1 Electropilot for base Connections G 1/8 Material zamak Weight kg 0,075 dvantages The original UNIVER Speed series was realized to solve some operational problems 0900 Possibility of defining the number of subebases at the moment of use Possibility of freely increasing or reducing the number of elements Quick assembly with special screw (builtin) standard supplied Reduction of stock holding Easy technical intervention ir supply is rotated by 90 in comparison with side consumption Standard (builtin) screw and ORing When assembling the manifold, put the bases on a flat surface and tighten the screw until the manifold is perfecty aligned. ISO 4762 = close the exhaust of the electropilot to get the 2/2 NO one (e) = manual on ring nut M5203 Electropiltots are supplied without coil, connector and locking ring (d) = the Ø shown on the 3/2 valves refers to the exhhaust = with 2 position screw 1_19
G1/8 Subbase 2 = Use N = Number of valve position G1/8 CNOMO Subbase 2 = Use N = Number of valve position 1_20