CombiTemp Temperature Measuring ystem Flexible building block concept All wetted parts in acid-proof, stainless steel ome hygienic connections conform to -A standards, FDA demands and EHEDG guidelines Flush mounted surface sensor ø8 mm stainless steel housing or DIN head, form B Pt1 or Pt1 sensors, - or -wire DIN A or B (1/1, 1/, 1/) elements tandard or fast response time Display and... ma transmitter Cable sensors tandard and Ex versions Description CombiTemp comprises a series of basic elements which can be combined to various temperature sensors and transmitters. The system includes -wire Pt1 cable sensors. Being a building block system CombiTemp offers a great flexibility in respect to modification, service and maintenance. A wide range of process connections according to national and international standards, sensor elements and transmitters, can be selected to meet the actual requirements. CombiTemp is particularly suitable for use in food, beverage, pharmaceutical and chemical industries. A complete temperature sensor can be ordered on one type number. Please refer to CombiTemp Accessories data sheet for a comprehensive range of accessories. Please refer to the separate data sheets for information and ordering details for transmitters and displays. The parts can be assembled by the user or delivered assembled and calibrated, if relevant. Provided an 8 mm dia. housing is used, options are also a... ma configurable display or, for stand alone indicating purposes, a battery powered display. Page
Technical Data Environmental conditions Media temperature, std. -... C urface sensor -...1 C Ambient temperature -...1 C (or max. temperature range for display/transmitter) Humidity < 1% H, condensing (or max. humidity for display/transmitter) Protection class DIN housing IP ø8 mm housing IP + IP Vibrations G, test (sensor tubes < mm only) Disposal of product and packing According to national laws or by returning to Baumer ensor tube and connection Material Acid-proof, stainless steel (AII 1/W.1.) Media pressure Max. 1 bar Time constant t. ee table below Mechanical tolerances IO 8-m ensor element ensor type Pt1, Class A or B Pt1, Class B Accuracy DIN/EN/IEC 1 1/1 DIN B ±(. +. x t) C 1/ DIN B +1/ x (. +. x t) C 1/ DIN B +1/ x (. +. x t) C 1/1 DIN A +(.1 +. x t) C Time Constant τ. ensor type iquids Air Dimension esponse Insert. m/sec. m/sec. m/sec. ø mm tube fast < 1. sec. < 1. sec. < 1. sec. ø8 mm tube fast < 1. sec. <. sec. < 181. sec. ø1 mm tube fast < 1. sec. <.8 sec. < 8.9 sec. ø1 mm tube fast < 1. sec. < 9.9 sec. < 11. sec. ø mm tube normal <.1 sec. <. sec. < 1.8 sec. ø8 mm tube normal <. sec. <. sec. <.9 sec. ø1 mm tube normal < 11.1 sec. <.8 sec. <. sec. ø1 mm tube normal < 1. sec. <.8 sec. < 19.8 sec. ø8 mm tube normal. mm < 1. sec. < 1.1 sec. <.1 sec. ø1 mm tube normal. mm < 8.1 sec. <. sec. < 1.1 sec. ø1 mm tube normal. mm < 1. sec. < 8. sec. < 89. sec. urface sensor, flush mounted < 1. sec. Dimensional Drawings - Mounting Details 8 1 G1/A 8. 11 Clamp IO 8, DN8 mounted on a tainless steel housing, ø mm Male Nipple G1/A Male Nipple G1/A Male Nipple G1/A mounted on DIN B housing mounted on ø8 mm housing Page
Examples of Application 811 11 11 xxxx 811 H1 F 11 xxxx 81 D 11 xxxx 81 C xxxx +CombiConnect connection PTFE Thermal isolation 81 A 1 Cable sensor 81-xx-xxxx BattTemp 8-11 81 D1 A 1 xxxx Display 81 - Transmitter xx-x 81 E1 A 1 Display 81 - Transmitter xx-x 81 D1 F 1 xxxx Transmitter xx-x 81 1 A1 11 xxxx 811 11 1 xxxx 811 1 1A 11 xxxx BattTemp 8-11 ensor Tube and -Element election Table ensor tube Embedded sensor, max. Cable sensor, max. ingle, -wire Duplex, -wire ingle, -wire x x x 8 1 x x x 1 x x x 1 x x x x Duplex, wire Page
Ordering Details - CombiTemp eries ensor tip Normal response sensor tip Fast response sensor tip, Note {1}, {} Connection ensor tube without thread or connection 1/ Male nipple, IO /1 G1/A Male nipple, IO 8/1 G1/ otating female nut, IO 8/1 G1/A otating male nipple, IO 8/1 G/ otating female nut, IO 8/1 G/A otating male nipple, IO 8/1 G1 otating female nut, IO 8/1 G1A otating male nipple, IO 8/1 1/ - 1 NPT Male nipple, ANI/AME B1..1 G1/A Male nipple for CombiConnect, IO 8/1 A/DN8 Hygienic, sensor tube, -A conform, Note {8} A/DN8 Hygienic, flush mounted surface sensor, -A conform, Note {8} GEA Tuchenhagen Varivent flange, DN/DN Clamp DN/8, IO 8, -A conform, Note {8} Clamp DN1, IO 8, -A conform, Note {8} 1/" - /" Tri-clamp M x 1. Male nipple, D/IO 1 M 11 otating female nut, DN8 M 11 otating female nut, DN1 ensor tube dimension ø mm x 1 mm, AII 1, see table page ø8 mm x 1 mm, AII 1, see table page ø1 mm x 1 mm, AII 1, see table page ø1 mm x 1 mm, AII 1, see table page ensor element or empty sensor tube Pt1, 1/1 DIN B, single, specified accuracy -... C Pt1, 1/1 DIN B, duplex, specified accuracy -... C Pt1, 1/ DIN B, single, specified accuracy...1 C Pt1, 1/ DIN B, duplex, specified accuracy...1 C Pt1, 1/ DIN B, single, specified accuracy...1 C Pt1, 1/ DIN B, duplex, specified accuracy...1 C Pt1, 1/1 DIN A, single, specified accuracy -... C Pt1, 1/1 DIN A, duplex, specified accuracy -... C Pt1, 1/1 DIN B, single, specified accuracy -... C, Note {} Pt1, 1/ DIN B, single, specified accuracy -... C Pt1, 1/1 DIN B, single, specified accuracy -... C ensor insert type ensor tube with embedded sensor element, -wire ensor tube with embedded sensor element, -wire ø. x. mm insert AII 1, -wire, max. length mm, Note {}, {} ø. x. mm insert AII 1, -wire, max. length mm, Note {}, {} ø. x. mm insert spring-loaded AII 1, -wire, max. length mm, Note {}, {} ø. x. mm insert spring-loaded AII 1, -wire, max. length mm, Note {}, {} Cable sensor, -wire, Note {} digit digit digit digit 8 digit 81x xxxx - - - - - - - - - - - - - - 1 8 9 A C D E G H I K M P Q 8 9 A B Page
Ordering Details - CombiTemp eries (continued) Cooling neck 1 off cooling neck (1 mm) off cooling neck (1 mm) off cooling neck (1 mm) Housing ø8 mm stainless steel housing, Note {} ø8 mm stainless steel housing with ø11 mm wall bracket, Note {} DIN B head with cover and M gland DIN B head with cover and M gland, shield connection terminal TE1 Field housing (no display) Electrical connection or std. DIN B head selected in the previous choice ø8 mm housing: 1 off M x 1. adaptor and 1 off blind plug (no gland incl.) ø8 mm housing: off M x 1. adaptor (no gland incl.) ø8 mm housing: off blind plugs ø8 mm housing: 1 off M1 gland and 1 off blind plug ø8 mm housing: off M1 gland ø8 mm housing: 1 off M1 with shield connection terminal and 1 off blind plug DIN B head: 1 off M gland for marine applications TE1 housing: M1 plug, pole TE1 housing: M1, plastic TE1 housing: M1 gland, nickel plated brass TE1 housing: M1 gland, nickel plated brass, with earth connection terminal ø8 mm housing: M1 plug, pole Cover or display Cover for ø8 mm housing Display, Note {} Terminal block or transmitter Ceramic terminal block Transmitter, Note {} Assembling Assembled, process connection at the base Assembled, process connection at the rear (ø8 mm housing only) Welded, process connection at the base (ø8 mm housing only) Welded, process connection at the rear (ø8 mm housing only) Approvals tandard version Ex ia (zone ) II 1 G EEx ia IIC Ex n (zone ) II G EEx na II ensor tube length () ength in mm. Please observe max. lengths Calibration certificate, -...1 C, points, order type number 9-1 Material certificate,.1 (EN1 ), order type number 9- Cable type no.: 18 pol M1 plug with m cable 18 pol M1 angle plug with m cable 9 digit 1 digit 11 digit 1 digit 1 digit 1 digit 1 digit 1...19 digit - - - - - - xxxx xxx xxxx 1 A B C D E F G H I xxxx Page
Notes: {1} ingle sensor element only. Max. sensor length mm. {} ø8 mm housing: Insert only if sensor tube is mounted at the rear. Observe length, refer to ensor Insert Type. {} efer to data sheet. pecify separate type number and configuration. {} Assembling is mandatory. Valid for A applications. {} Embedded sensors only. {} Not valid for a sensor with fast response tip. Dimensional Drawings AF. G1/A. G/A G1A G1/A G/A G1A AF AF AF ø...1 ø...1 ø...1 ø...1 Male nipple G1/A, 1/ and M x 1. otating male nipple G1/A, G/A and G1A DN/8 ø. DN1 ø 1 G1/ AF G/ AF G1 AF1 ø...1 ø...1 ø...1 ø...1 Clamp DN/8/1 EPDM gasket included, Note {8} otating female nut G1/, G/ and G1 Page
Dimensional Drawings AF 1. 1. ø...1 ø...1 ø...1 ø...1 Male nipple G1/A for CombiConnect A/DN8 hygienic sensor tube EPDM O-ring included, Note {8} A/DN8 hygienic flush mounted surface sensor EPDM O-ring included, Note {8} AF. 1. ø...1 ø...1 ø...1 ø...1 ø...1 ø...1 DN8 DN1 ø ø Male nipple 1/ - 1 NPT ensor tube without connection M 11 rotating female nut ø 19 ø...1 ø...1 ø...1 ø...1 Tri-Clamp 1/ - / GEA Tuchenhagen Varivent DN/DN Page
ensor inserts Calculation of insert length: When ordering an insert the length must be calculated from the formula: DIN housing with G1/A male nipple connection and sensor insert Note {8} Housing shaft Housing shaft {8} Total body length ensor length () DIN housing: 11. mm ø8 housing:. mm Insert length = ensor length + total body length + housing shaft (Total body length can be calculated from the dimensional drawings on pages and ) Example. Insert for a G1/A male nipple sensor in a DIN housing, 1 mm sensor tube, normal response sensor tip: Housing shaft = 11. mm Total body length =. + = mm (see page ) ensor length = 1 mm This insert must be ordered with a 11. mm sensor tube. Notes {1} ingle sensor element only. Max. sensor length mm. {} ø8 mm housing: Insert only if sensor tube is mounted at the rear. Observe length, refer to ensor Insert Type. {} efer to data sheet. pecify separate type number and configuration. {} Assembling is mandatory. Valid for -A applications. {} Embedded sensors only. {} Not valid for a sensor with fast response tip. -wire ensors White White ed ed White White ed ed Application Photos Warning: One of the wires may not be connected in case of a -wire connection to the temperature transmitter {8} The -A mark is valid only when the product is mounted in a -A marked counter part and installed according to the installation manual. Use also a -A marked O-ring or gasket if relevant. The -A marked products conforms to the -A anitary tandard criteria. Materials and surfaces fulfill the FDA demands and follow the EHEDG guidelines regarding design, materials and finishing. EPDM O-rings supplied with -A marked products are conform to anitary tandard Class II (8% milk fat max.) EPDM gaskets supplied with -A marked products are conform to anitary tandard Class I (8% milk fat max.) Duplex Elements UK/1-- This data sheet may only be reproduced in full. ø8 mm housing with FlexView Cut through DIN - B housing ø8 mm housing with glands Gland (blind plug at the rear) FlexTop 1 temperature transmitter Cover not mounted Clamp connection G1/A male nipple connection A/DN8 connection at the rear Fast response sensor Normal response sensor Fast response sensor Page 8