ABL Series Relay Terminal Block (Screwless Type) Features Input (NPN, PNP common) and Output (Independent, Common) Selection with Jumper Bars Allows switching between NPN common and PNP common inputs by changing jumper bar location. Also allows common output by using a jumper bar. Provides flexibility for usage in various applications. Operation Status Indicator Blue LED indicators are available for each relay, offering convenient status check. NPN Common Input PNP Common Input COMMON Output Top Bottom Independent outputs without jumper bar. One-Touch Screwless Type for Easy Wiring and Stable Connection The one-touch screwless type terminal blocks are designed as a spring clamp structure. It is highly resistant to vibration and will not loosen or disconnect from extended use. It can also save installation work with simple one-touch snap wiring. Simple and Convenient Relay Replacement The relay release levers make it easy to remove and replace relays. C-40
Relay Terminal Block Control Ø/5 Relay Protection Cover The covers provide protection for the relays and a clean, tidy appearance. Types of Mounting Methods Supports DIN rail mount and screw mount methods for flexible application. Ø30 30 Round Push Button Square Push Button Selector Key Selector Double Push Button Mushroom-head Push Button Emergency Pilot Lights Buzzers Modular Terminal Blocks TUM(Spring Type) TUW(Dual Spring Type) TM(Manual Type) I/O Terminal Blocks Applications Application in Machining Centers to Provide Convenient Wiring and Maintenance for Users AFS(Interface AFL/AFR(Interface ACS(Common AFE(Sensor Connector ABS(Relay ABL(Relay Power Relay TM4 I/O Cables MITUBISHI LSIS Autonics RS Automation YOKOGAWA FUJI KDT machining center OMRON TELEMECANIQUE For SERVO Open Type Cables Cable Appearance Remote I/O Terminal Blocks ARD(DeviceNet Analog ARM(Modbus Digital Others Sensor Connectors Sockets Sensor Distribution Boxes Valve Plugs Thumbwheel C-4
ABL Series C-4 Relay Terminal Block (Screwless Type) Features Switch between NPN and PNP common input using jumper bars. Load common mode also available. Convenient one-touch screwless type connection : Spring structure design for high durability and vibration resistance. Also, maintains constant connection strength regardless of wiring experience. Easy replacement using the relay removal lever mounting methods (DIN rail, screw mount) Please read Caution for your safety in operation manual before using. Model Model Terminal type Connector type ABL-L04PQ-UN ABL-L04PQ-UY ABL-L04R6-UN ABL-L04R6-UY Specifications Screwless Screwless 4 EA No. of relay points Relay type Input logic Varistor installation MATSUSHITA (Panasonic) PQ OMRON G6B : The color of the jumper bar insertion holes indicate the relay types of the model. (green: MATSUSHITA (Panasonic) PQ, navy blue: OMRON G6B) A Terminal Specifications End Sleeve (Ferrule Terminal) crimp terminal Please use UL certified crimp terminals. B A B C Applicable wire 0 to.0 Max..0 Max. 4. AWG-6 (0.30 to.5mm ) C COM (universal) (unit: mm) Not installed Installed Not installed Installed Model ABL-L04PQ-UN ABL-L04PQ-UY ABL-L04R6-UN ABL-L04R6-UY Power supply 4VDC±0% Rated load voltage & current 50VAC 5A, 30VDC 5A Current consumption Max. 0mA 3 Output type a contact relay output Applicable relay Model PQa-4V [MATSUSHITA (Panasonic)] G6B-74P-FD-US [OMRON] No. of relay points 4-point Terminal type Screwless Terminal pitch 0.mm Applicable Solid wire Ø0.6 to Ø.5mm wire Stranded wire 4 AWG-6 (0.3 to.5mm ) Stripped wire length 8 to 0mm Insulation resistance Min.,000MΩ (at 500VDC megger) Dielectric strength,000vac 50/60Hz for min. (between coil-contact) 5,,000VAC 50/60Hz for min. (between open contacts) 6 Vibration Mechanical.5mm amplitude at frequency of 0 to 55 Hz (for min.) in each X, Y, Z direction for hours Malfunction.5mm amplitude at frequency of 0 to 55 Hz (for min.) in each X, Y, Z direction for 0 min. Shock Mechanical,000m/s (approx. 00G) in each X, Y, Z direction for 3 times Malfunction 00m/s (approx. 0G) in each X, Y, Z direction for 3 times Environment Ambient temperature -5 to 55, storage: -5 to 65 Ambient humidity 35 to 85%RH, storage: 35 to 85%RH Material Terminal block: PA66, Conducting plate: Brass, CASE&BASE: MPPO Jumper bar EA Protection structure IP0 Weight 7 Approx. 48g (approx. 9g) Approx. 50g (approx. 94g) Approx. 43g (approx. 87g) Approx. 44g (approx. 88g) : This is for contact protection and it is recommended to use at the inductive load. : Relay contact capacity for resistive load. 3: The current consumption including LED current by one relay. 4: When using stranded wire, use end Sleeve (ferrule terminal) crimp terminals. 5: OMRON relay is 3,000VAC. 6: In case of ABL-L04 -UY (varistor installed type), this is 300VAC. 7: The weight includes packaging. The weight in parentheses is for unit only. Environment resistance is rated at no freezing or condensation.
Relay Terminal Block Control Dimensions (unit: mm) Ø/5 Ø30 -Ø5 Operation indicator (blue) Jumper bar (model: JB-0.-04) For NPN or PNP common, the additional jumper bar is sold separately 36. 5. 3.6 30 Round Push Button Square Push Button Selector 6 Key Selector 98 07 0. 30.6 3.5.5 4-Ø.5 4-3.9 -C0..5 t0.5 Double Push Button Mushroom-head Push Button Emergency Pilot Lights 43 Buzzers 0. Modular Terminal Blocks TUM(Spring Type) TUW(Dual Spring Type) TM(Manual Type) 37 I/O Terminal Blocks Connections 35. 89 9.5 NPN, PNP, LOAD common are operated by the inserting position of the Jumper bar. Please refer to the ' Using jumper bars' of ' Using Jumper Bar And Replacing Relay'. AFS(Interface AFL/AFR(Interface ACS(Common AFE(Sensor Connector ABS(Relay ABL(Relay Power Relay INPUT 5 NPN common by jumper bar RY LOAD common by jumper bar OUTPUT 9 I/O Cables MITUBISHI LSIS PNP common by jumper bar 6 RY 3 0 Autonics RS Automation YOKOGAWA FUJI KDT OMRON TELEMECANIQUE 4 For SERVO Open Type Cables 7 RY3 Cable Appearance Remote I/O Terminal Blocks 3 8 RY4 5 ARD(DeviceNet Analog ARM(Modbus Digital Others 4 parts are only for ABL-L04-UY (varistor installed type). 6 Sensor Connectors Sockets Sensor Distribution Boxes Valve Plugs Thumbwheel C-43
ABL Series Connecting Crimp Terminals. Connecting and Removing end sleeve (ferrule terminal) crimp terminal at screwless type terminal block Connecting ) Push the end sleeve (ferrule) crimp terminal towards direction to complete the connection. Removing ) Press and hold the catch above the terminal in direction with a flathead screwdriver. ) Pull and remove the end sleeve (ferrule) crimp terminal towards direction 3. 3 Using Jumper Bar And Replacing Relay Removing the protection cover ) Pull the protection cover towards direction to insert jumper bars or replace relays. Using jumper bars ) Remove the protection cover and use the jumper bars accordingly. NPN COMMON PNP COMMON LOAD COMMON Insert the jumper bar to the far left towards terminals 4 and 8. Insert the jumper bar to the far right towards terminals and 5 Insert the jumper bar above terminals,, 0, 9. Replacing relays ) Remove the protection cover. ) Push the operation indicator guide in direction to remove the relay. 3) Insert a new relay to the case. : The color of the jumper bar insertion holes indicate the relay types of the model. ( green: MATSUSHITA (Panasonic) PQ, navy blue: OMRON G6B) Only insert designated relays for each model. Execute above directions only for replacing relays. If not, it may cause relay damage. Relay type color Operation indicator guide C-44
Relay Terminal Block Installation. Mounting and Removal at DIN rail Mounting ) Pull the rail lock towards direction. ) Attach the DIN rail connection hook onto the DIN rail. 3) Push the unit towards direction, then push the rail lock in to lock into position. DIN rail connection part DIN rail. Mounting with screws )The unit can be mounted on panels using the rear rail locks. )Pull the rail locks towards directions and. 3)M4 0mm spring washer screws are recommended for installation. When using flat washers, use Ø9mm diameter washers. The tightening torque should be between 0. and 5.3 kgf.cm (.0 to.5n.m). Control Ø/5 Ø30 30 Round Push Button Square Push Button Selector Key Selector Double Push Button Mushroom-head Push Button Emergency Pilot Lights Rail lock Buzzers Modular Terminal Blocks Rail lock TUM(Spring Type) TUW(Dual Spring Type) TM(Manual Type) Removing ) Insert a screwdriver into the rail lock hole and pull it towards direction. )Remove the unit by pulling the unit towards direction. I/O Terminal Blocks AFS(Interface AFL/AFR(Interface ACS(Common AFE(Sensor Connector ABS(Relay ABL(Relay Power Relay I/O Cables MITUBISHI LSIS Autonics RS Automation YOKOGAWA Caution During Use. Do not use the product outside of rated temperature and humidity.. Make sure that voltage fluctuation in the power supply is within the rated range. 3. When connecting PLC or other controllers, check the polarity of power and COMMON before wiring. 4. Use AWG -6 (0.3 to.5mm ) wire for power and use appropriate crimp connectors for the terminals. 5. Turn OFF the power supply before wiring. 6. Turn OFF the power supply before replacing relays. 7. Do not use the unit in the following environments. Environments with high vibration or shock. Environments where strong alkalis or acids are used. 3Environments with exposure to direct sunlight. 4Near machinery which produces strong magnetic force or electric noise. 8. This unit may be used in the following environments. It shall be used indoor. Altitude up to,000m 3 Pollution degree 4 Installation category II FUJI KDT OMRON TELEMECANIQUE For SERVO Open Type Cables Cable Appearance Remote I/O Terminal Blocks ARD(DeviceNet Analog ARM(Modbus Digital Others Sensor Connectors Sockets Sensor Distribution Boxes Valve Plugs Thumbwheel C-45