EXERNL MNIFOLDS & VLVE MOUNING EXMLES C + SD02 SCKLE VLVES C + NG3 MICRO LOCKS & VLVES SD00 1.2 1.1 0 1 C O SD02 SCKLE VLVE CONVERER 2.2 2.1 3.2 3.1 4.2 4.1 2 3 4 5 X.1 side port X.2 side port (only version) 5 5.1 4 4.1 3 3.1 0 1 2 SD02 CLOSED END LE SD02 M60403010 M60403005 M60403004 C O M CONVERER C + NG6 (CEO 3) LOCKS & VLVES SD03 2.3 3.2 2.2 4.1 3.1 2.1 5 4 3 2 E60403001 E60403010 E60413001 E60423001** E60433001 1 0 E60403002 E60403004 he mini powerpack external manifolds and valves are arranged following a stack level logic. Each stack is numbered eg. n, n.1, n.2, n.3,... where n is the basic manifold stack number, n.1 is the first valve mounted on top of manifold n; n.2 is the second one mounted on top of n.1,... See above self-explanatory drawings where manifolds are coloured in orange and valves in green. Stack levels are numbered in red.
NG6 (CEO 3) MODULR MNIFOLDS, RER ORS 32,5 (1,28) 49 (1,93) 17,5 (0,69) 47,5 (1,87) 3/8 S 9/16-18UNF (US type) 0,37 Kg (0,82lb) 39 (1,54) 13 (0,51) 1/4 S 1/8 S 1 1 1 1 arallel connection Rear ports Rear ports US execution E60403001 E60403001US Option port: ORMF001 port 1/4 S F for modular blocks 33 1/4 S 1/8 S Hex.19 Note: to add external manifolds to C assembly code, just add their spare part codes at the end of the C code. eg: C-0,8 12DC-U-J-G1,1-D/280-G-1,5L+E60403004+E60403001 he Cetop attachment is on motor side. With C motor frames bigger than 71 and DC motors bigger than dia. 125mm, always add a spacer manifold E60403004 (see next page) below the Cetop manifold to avoid interference between the Cetop valve and the motor. Recommended tightening torque for M8 bolts: 16 Nm. ttention! Do not use tie-rods less than 8.8..
NG6 (CEO 3) MODULR MNIFOLDS, LERL ORS 49 (1,93) 3/8 S 9/16-18UNF (US type) 13 (0,51) 1/4 S 1/8 S 16 (0,63) 55 (2,16) 0,56 Kg (1,2lb) 1 1 1 1 arallel connection Rear ports Rear port US execution E60403010 E60403010US Option port: ORMF0001 port for modular blocks 33 1 1 1 1 Series connection Rear ports Rear port US execution E60403011 E60403011US 1/4 S Hex.19 1/8 S Note: to add external manifolds to C assembly code, just add their spare part codes at the end of the C code. Ex: C-0,8 12DC-U-J-G1,1-D/280-G-1,5L+E60403004+E60403010 he Cetop attachment is on motor side. With C motor frames bigger than 71 and DC motors bigger than dia. 125mm, always add a spacer manifold E60403004 (see next page) below the Cetop manifold to avoid interference between the Cetop valve and the motor. Recommended tightening torque for M8 bolts: 16 Nm. ttention! Do not use tie-rods less than 8.8.
NG6 (CEO 3) MODULR MNIFOLDS WIH INEGRL ILO OERED CHECK VLVES 58 (2,28) 2 X M8 bolts 108 (4,25) 1/4 S 9/16-18 UNF (US type) 48 (1,89) 23 (0,91) 24 (0,94) 0,71 Kg (1,56lb) E60413002 E60413002US* E60413001 E60413001US* E60413003 E60413003US* *: US execution with 9/16-18UNF SE06 exit ports Code does not include the Cetop solenoid valve. Recommended tightening torque for M8 bolts: 16 Nm. ttention! Don t use tie-rods less than 8.8.
MODULR MNIFOLDS WIH ILO OERED CHECK VLVES vailable on: Central manifold U4 Central manifold UR 58 (2,28) 2 X M8 bolts 108 (4,25) 1/4 S 9/16-18 UNF (US type) 32 (1,26) 0,5 Kg (1,1lb) E60403027 E60403027US* *: US execution with 9/16-18UNF SE06 exit ports Recommended tightening torque for M8 bolts: 16 Nm. ttention! Do not use tie-rods less than 8.8.
SCER ELEMENS 28 (1,10) Suitable for all central manifolds with C motors with frame bigger than 71 and DC motors with frame bigger than Ø125. 40 (1,57) 0,23 Kg (0,5lb) Mounting example E60403004 1 1 E60403004 ttention! Do not use tie-rods less than 8.8.
90 ROION MNIFOLDS 49MM IMROVED 44,5 (1,75) For C motor with frame 90 or above and DC motor Ø151 or above muste be used with E60403004. 49,5 (1,95) 0,72 Kg (1,59lb) Mounting example E60403002 1/4 S 1 1 E60403002 ttention! Do not use tie-rods less than 8.8.
90 ROION MNIFOLDS WIH DOULE-SIDED CHMEN & 79MM 93 (3,66) 44 (1,73) For C motor with frame 90 or above and DC motor Ø151 or above must be used with E60403004. 79 (3,11) 0,72 Kg Mounting example E60403005DF 1/4 S 1 1 2 2 E60403005DF ttention! Do not use tie-rods less than 8.8.