ÒZNRâÓ Transient/Surge Absorbers, SMD Moded Case Type

Similar documents
Reference Guide to Standard Products Part No. Applicable Standards Varistor at ma Allowable Clamping at 8/20μs Peak Current at 8/20μs(A) Recommended A

Metal Oxide Varistor (MOV) Data Sheet

G N R 2 0 D K * * *

Pan Overseas Zinc Oxide Varistors

Electrical Specifications 5mm. Ic (A) (V)

NFC. (Varistor Type NFC)

Metal Oxide Varistor:TVR-D Series

MVR G. Size: Unit:mm. Type Length(L) Width(W) High(H) Termination(L1) ± ± (max) 0.40±

Metal Oxide Varistor:TVR-D Series

Introduction fo FPV Series Multilayer Chip Varistor

Metal Oxide Varistor:TVR-M Series

TABLE of contents. Metal Oxide Varistor (MOV) Varistors-5D Series Varistors-7D Series Varistors-10D Series... 5

Metal Oxide Varistor:TVR-M Series

Metal Oxide Varistor:TVR Series

Metal Oxide Varistor:TVM-B Series

VE09 M K. AC Operating Voltage (EIA coding) VE. Nominal Voltage at 1 ma dc (EIA coding) VF

ORDER INFORMATION L-KLS6-MVR G

METAL OXIDE VARISTOR (MOV)

MULTILAYER CHIP VARISTORS

JNR ZINC OXIDE VARISTORS FEATURES APPLICATIONS PARAMENTERS DEFINITION HOW TO ORDER

(MLV) MULTILAYER CHIP VARISTOR

ZINC OXIDE VARISTOR. Fenghua (HK) Electronics Ltd.

Specification for Release

Surface Mount Multilayer Varistors

SINOCHIP(NANJING) ELECTRONIC CO.,LTD Catalog. Ⅳ Varistor Type MYL5 28

varistor plus catalog

Metal Oxide Varistor:TVT Type

Metal Oxide Varistor Thermally Protected Type. TPV Series FEATURE PART NUMBERING SYSTEM LEAD CONFIGURATION SURGE CURRENT STANDARD WAVEFORM

XKT. Metal Oxide Varistor FEATURES

Ancol. Ancol Electronics Co.,Ltd Non-Linear Resistor (mm) Element Diameter Packaging K ±10% Varistor Voltage

THIS PAGE WAS INTENTIONALLY LEFT BLANK.

Sensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C

Spezifikation für Freigabe / specification for release

THIS PAGE WAS INTENTIONALLY LEFT BLANK.

Spezifikation für Freigabe / specification for release

E CQC CQC CQC CQC CQC D-Seires. 11 to to to

RELIABILITY TEST P10 PRODUCT SERIES P11 ~ P16 P17 ~ P22 P23 P24 P25 P26 V-I CURVE P27 ~ P31 SURGE LIFE TIME RATINGS P32 ~ P36 OUTLINE DIMENSION

Spezifikation für Freigabe / specification for release

Glass Encapsulated SMD Varistor MLV

WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210

Features. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A

P-Series 11 to to to to to to to 1100 >1000 <25

FUJI Ceramic Surge Absorbers

VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.

Anti-Surge Thick Film Chip Resistors

WF25S WF20S WF12S ±5% 20% Power Surge Chip Resistors Size 2512, 2010, Customer : Approval No : Issue Date : Customer Approval :

PCB Relay. Single-side stable EN60950/EN41003 PCB terminal G6S-2 G6SU-2 G6SK-2 G6S-2-Y Surface mounting. stable

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series

COMPACT FLAT SIZE FOR AUTOMOTIVE

1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC

NTC Thermistor:TTC05 Series

COMPACT FLAT SIZE FOR AUTOMOTIVE

Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.

Anti-Surge Thick Film Chip Resistors

Specification YGHR411-H CUSTOMER SUPPLIER. Rev.01 December Document No. : SSC-QP (Rev.00)

Spezifikation für Freigabe / specification for release

WK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805

WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603

High Voltage PolyTerm Ceramic Capacitors

55 Series - Miniature General Purpose Relays 5-10 A

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402

AUML Varistor Series. Surface Mount Varistors

WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603

WF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :

SPHV-C Series 200W Discrete Bidirectional TVS Diode

G6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information

Zinc Oxide Varistors Part Numbering

Varistor Products Radial Lead Varistors > ZA Series

WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512

THIS PAGE WAS INTENTIONALLY LEFT BLANK.

WR10X ±1%, ±5% General purpose chip resistors Size 1210

Ordering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays

CPTC Thermistor:Dip Type PPL Series

Metal Alloy Low-Resistance Resistor Specifications

China - Germany - Korea - Singapore - United States - smc-diodes.com

WR04X ±1%, ±5% General purpose chip resistors Size 0402

WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402

Gas Discharge Tubes SL1002A Series

Design number. RC filtering circuit for USB interface

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

Teccor brand Thyristors Standard Bidirectional SIDACs

Metal Oxide Varistor:TVA Series

n For use in telecommunication circuit applications requiring low current protection with high surge tolerance

Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)

Time scale: from 0.05 s to 100 h Multi-function Plug-in for use with 96 series sockets. Relay + socket. Wiring diagram (without control signal)

VAR Series Zinc Oxide Varistor

46 and 56 Series - Relays for railway applications 8-12 A. Features 46.52T 56.32T 56.34T

MIDDLE LOAD RELAY FOR SMART J/B

S J

NTC Thermistor:TTC05 Series

SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics

High Power Low Ohm Chip Resistors. Size W, W, /2W

Applicable Terminal Relay Rated voltage Model G6D-F4B 12 VDC G6D-1A (see note) 24 VDC 12 VDC G6D-1A-AP (see note) 24 VDC G3DZ-F4B 12 VDC G3DZ-2R6PL

Thin Film Chip Resistor (ARG Series)

Application. Features. Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers

Ceramic PTC Thermistor: PPL Series

SFI Electronics Technology

Transcription:

ÒZNRâÓ Transient/Surge Absorbers, SMD Moded Case Type Type: VF Type: CF Type: SF n Features l Large withstanding surge current capability, compact size l Designed for flow/reflow soldering l Excellent response against high steep surge voltages l Low clamping voltage for better surge protection n Recommended Applications l Protection of communication module (Modems, xdsls, Terminal Adaptes) l Protection of consumer equipment l Protection of industrial equipment l Protection of automobile equipment l Absorption of switching surge from relays n Handling Precautions See Pages 134 to 136 n Explanation of Part Numbers E R Z V F E R Z F M K n Construction 1 ZNR element ZnO etc. 2 Resin mold Epoxy Resin(UL94V-0 approved) 3 Conductive adhesive Silver 4 Electrode Silver 5 Lead terminals Soldered Ni-Fe Alloy n Dimensions in mm (not to scale) Type W L H S E VF1M 6.0±0.4 8.0±0.5 3.2±0.3 1.3±0.3 2.5±0.2 VF1T0 6.0±0.4 8.0±0.5 2.3±0.1 1.3±0.3 2.5±0.2 CF 6.0±0.4 SF 6.2±0.4 8.0±0.5 3.2±0.3 1.3±0.3 2.5±0.2 Rev.02/04

n Ratings and Characteristics l Operating Temperature Range: Ð40 to 85 C l Storage Temperature Range: Ð40 to 125 C l Temperature Coefficient of Varistor : 0 to Ð0.05 %/ C Type VF1M Varistor Clamping Allowable at Ip Rated Energy Peak Current (max.) Power (2 ms) (8/20 µs, 2 times) V 1mA (V) ACrms (V) DC (V) V xa (V) Ip (A) (W) (W) (A) *ERZVF1M220 22( 20~ 24) 14 18 43 2.5 0.01 10.5 125 *ERZVF1M270 27( 24~ 30) 17 22 53 2.5 0.01 10.7 125 *ERZVF1M330 33( 30~ 36) 20 26 65 2.5 0.01 10.8 125 *ERZVF1M390 39( 35~ 43) 25 31 77 2.5 0.01 10.9 125 *ERZVF1M470 47( 42~ 52) 30 38 93 2.5 0.01 11.1 125 *ERZVF1M560 56( 50~ 62) 35 45 110 2.5 0.01 11.3 125 *ERZVF1M680 68( 61~ 75) 40 56 135 2.5 0.01 11.6 125 *ERZVF1M820 82( 74~ 90) 50 65 135 1011 0.11 12.5 600 *ERZVF1M101 100( 90~110) 60 85 165 1011 0.11 13.0 600 *ERZVF1M121 120(108~132) 75 100 200 1011 0.11 13.5 600 *ERZVF1M151 150(135~165) 95 125 250 1011 0.11 14.5 600 *ERZVF1M201 200(185~225) 130 170 340 1011 0.11 16.0 600 *ERZVF1M221 220(198~242) 140 180 360 1011 0.11 16.5 600 *ERZVF1M241 240(216~264) 150 200 395 1011 0.11 17.5 600 *ERZVF1M271 270(247~303) 175 225 455 1011 0.11 18.0 600 *ERZVF1M331 330(297~363) 210 270 545 1011 0.11 18.0 300 *ERZVF1M361 360(324~396) 230 300 595 1011 0.11 19.0 300 *ERZVF1M391 390(351~429) 250 320 650 1011 0.11 19.0 300 *ERZVF1M431 430(387~473) 275 350 710 1011 0.11 10.0 300 *ERZVF1M471 470(423~517) 300 385 775 1011 0.11 10.0 300 Packaging Style Code: Ò1Ó for bulk, Ò2Ó for embossed taping Type VF1T Varistor Clamping Allowable at Ip Rated Energy Peak Current (max.) Power (2 ms) (8/20 µs, 2 times) V 1mA (V) ACrms (V) DC (V) V xa (V) Ip (A) (W) (W) (A) ERZVF1T820 182( 74~ 90) 1150 65 145 5 0.1 1.7 400 ERZVF1T101 100( 90~110) 1160 85 175 5 0.1 2.0 400 ERZVF1T151 150(135~165) 1195 125 260 5 0.1 3.0 400 ERZVF1T241 240(216~264) 150 200 415 5 0.1 5.0 400 ERZVF1T271 270(247~303) 175 225 475 5 0.1 6.0 400 Packaging Style Code: Ò1Ó for bulk, Ò2Ó for embossed taping

n Ratings and Characteristics l Operating Temperature Range: Ð40 to 85 C l Storage Temperature Range: Ð40 to 125 C l Temperature Coefficient of Varistor : 0 to Ð0.05 %/ C Type CF Varistor Clamping Allowable at Ip Rated Energy Peak Current (max.) Power (2 ms) (8/20 µs, 2 times) V0.1 ma (V) ACrms (V) DC (V) Vx A (V) Ip (A) (W) (J) (A) ERZCF1MK220 22 ( 20Ð 24) 14 18 48 1 0.01 0.4 50 ERZCF1MK270 27 ( 24Ð 30) 17 22 60 1 0.01 0.5 50 ERZCF1MK330 33 ( 30Ð 36) 20 26 73 1 0.01 0.6 50 ERZCF1MK390 39 ( 35Ð 43) 25 31 86 1 0.01 0.8 50 ERZCF1MK470 47 ( 42Ð 52) 30 38 104 1 0.01 1.0 50 ERZCF1MK560 56 ( 50Ð 62) 35 45 123 1 0.01 1.0 50 ERZCF1MK680 68 ( 61Ð 75) 40 56 150 1 0.01 1.2 50 ERZCF1MK820 82 ( 74Ð 90) 50 65 145 5 0.1 1.7 200 ERZCF1MK101 100 ( 90Ð110) 60 85 175 5 0.1 2.0 200 ERZCF1MK121 120 (108Ð132) 75 100 210 5 0.1 2.5 200 ERZCF1MK151 150 (135Ð165) 95 125 260 5 0.1 3.0 200 ERZCF1MK201 200 (185Ð225) 130 170 355 5 0.1 4.0 200 ERZCF1MK221 220 (198Ð242) 140 180 380 5 0.1 4.5 200 ERZCF1MK241 240 (216Ð264) 150 200 415 5 0.1 5.0 200 ERZCF1MK271 270 (247Ð303) 175 225 475 5 0.1 6.0 200 ERZCF1MK361 360 (324Ð396) 230 300 620 5 0.1 6.0 200 ERZCF1MK391 390 (351Ð429) 250 320 675 5 0.1 6.0 200 ERZCF1MK431 430 (387Ð473) 275 350 745 5 0.1 6.3 200 ERZCF1MK471 470 (423Ð517) 300 385 810 5 0.1 7.0 200 Packaging Style Code: Ò1Ó for bulk, Ò2Ó for embossed taping Type SF Varistor Clamping Allowable at Ip Rated Energy Peak Current (max.) Power (2 ms) (8/20 µs, 2 times) V1 ma (V) ACrms (V) DC (V) Vx A (V) Ip (A) (W) (J) (A) ERZSF1MK220 22 ( 20Ð 25) 14 18 43 2.5 0.02 0.9 125 ERZSF1MK270 27 ( 24Ð 30) 17 22 53 2.5 0.02 1.0 125 ERZSF1MK330 33 ( 30Ð 36) 20 26 65 2.5 0.02 1.2 125 ERZSF1MK390 39 ( 35Ð 43) 25 31 77 2.5 0.02 1.5 125 ERZSF1MK470 47 ( 42Ð 52) 30 38 93 2.5 0.02 1.8 125 ERZSF1MK560 56 ( 50Ð 62) 35 45 110 2.5 0.02 2.2 125 ERZSF1MK680 68 ( 61Ð 75) 40 56 135 2.5 0.02 2.5 125 ERZSF1MK820 82 ( 74Ð 90) 50 65 135 10 0.25 3.5 600 ERZSF1MK101 100 ( 90Ð110) 60 85 165 10 0.25 4.0 600 ERZSF1MK121 120 (108Ð132) 75 100 200 10 0.25 5.0 600 ERZSF1MK151 150 (135Ð165) 95 125 250 10 0.25 6.0 600 ERZSF1MK201 200 (185Ð225) 130 170 340 10 0.25 8.0 600 ERZSF1MK221 220 (198Ð242) 140 180 360 10 0.25 9.0 600 ERZSF1MK241 240 (216Ð264) 150 200 395 10 0.25 10.0 600 ERZSF1MK271 270 (247Ð303) 175 225 455 10 0.25 12.0 600 ERZSF1MK361 360 (324Ð396) 230 300 595 10 0.20 12.0 400 ERZSF1MK391 390 (351Ð429) 250 320 650 10 0.20 12.0 400 ERZSF1MK431 430 (387Ð473) 275 350 710 10 0.20 14.0 400 ERZSF1MK471 470 (423Ð517) 300 385 775 10 0.20 14.0 400 Packaging Style Code: Ò1Ó for bulk, Ò2Ó for embossed taping

n Typical Characteristics n vs. Current n ERZVF1(2)M220 to ERZVF1(2)M680 n Impulse n ERZVF1(2)M820 to ERZVF1(2)M471 ERZVF1(2)M820 to ERZVF1(2)M271 ERZVF1(2)M331 to ERZVF1(2)M471 - - - - - - n ERZVF1(2)T820 to ERZVF1(2)T271 - - - - - -

n Typical Characteristics n vs. Current n ERZCF1 (2) MK220 to ERZCF1 (2) MK680 n Impulse n ERZCF1 (2) MK820 to ERZCF1 (2) MK471

n Typical Characteristics n vs. Current n ERZSF1 (2) MK220 to ERZSF1 (2) MK680 n Impulse n ERZSF1 (2) MK820 to ERZSF1 (2) MK471

n Marking Contents 1 Trade Mark Trade Mark 2 Product Name ZNR 3 Type 4 VF1M Type:VFM, VF1T Type:VFT CF Type:FK, SF Type:SF Abbreviation of The first two digits are significant figures and the third one denotes the number of zeros following. 5 Date Code Left(Year): 2002:B, 2003:C, 2004:D, 2005:E, 2006:F Right(Month): Jan. to Sep.:1 to 9, Oct.:0, Nov.:N, Dec.:D n Packaging Specifications l Packing Quantity Size Code Style Embossed taping Bulk ÒVF1MÓ, ÒVF1TÓ, ÒCFÓ, ÒSFÓ 2000 pcs./reel 200 pcs./bag l Reel l Embossed Taping Dimensions A B C D E (mm) 382 max. 50 min. 13.0±0.5 21.0±0.8 2.0±0.5 Dimensions W T t r +2.0 (mm) 16.4 0 22.4 max. 2.5±0.5 1.0 Dimensions A B W F E P1 (mm) 6.8±0.2 11.9 max. 16.0±0.3 7.5±0.1 1.75±0.10 8.0±0.1 Dimensions P2 P0 fd0 t1 t2 (mm) 2.0±0.1 4.0±0.1 1.5 +0.1 0.6 max. 6.5 max. -0

n Performance Characteristics Characteristics Test Methods Specifications Standard Test Condition Electrical measurements (initial/after tests) shall be conducted at temperature of 5 to 35 C, relative humidity maximum of 85 % ÑÑ Varistor Allowable Clamping Rated Power Energy Peak Current Temperature Coefficient of Varistor The voltage between two terminals with the specified measuring current CmA DC applied is called Vc or VCmA. The measurement shall be made as fast as possible to avoid heating effects. The recommended maximum sinusoidal wave voltage (rms) or the maximum DC voltage that can be applied continuously. The maximum voltage between two terminals with the specified impulse current (8/20 µs). The maximum power that can be applied within the specified ambient temperature. energy at less than ±10 % of varistor voltage change when the standard impulse (2 ms) is applied one time. current at less than ±10 % of varistor voltage change when impulse current (8/20 µs) is applied two times continuously with the interval of 5 minutes. VCmA at 85 C Ð VCmA at 25 C 1 100(%/ C) VCmA at 25 C 60 To meet the specified value. 0 to Ð0.05 %/ C Impulse Life (I) Impulse Life (II) The change of Vc shall be measured after the specified impulse is applied 10000 times continuously with the interval of 10 seconds at room temperature. Type Part Number Waveform Current ERZVF1M220 to ERZVF1M680 8/20 µs 8 A VF1M ERZVF1M820 to ERZVF1M271 8/20 µs 40 A ERZVF1M331 to ERZVF1M471 8/20 µs 30 A VF1T1 ERZVF1T820 to ERZVF1T271 8/20 µs 20 A CF ERZCF 1MK220 to ERZCF 1MK680 2 ms 0.5 A ERZCF 1MK820 to ERZCF 1MK471 8/20 µs 20 A ERZSF 1MK220 to ERZSF 1MK680 8/20 µs 18 A SF ERZSF 1MK820 to ERZSF 1MK271 8/20 µs 50 A ERZSF 1MK331 to ERZSF 1MK471 8/20 µs 40 A The change of Vc shall be measured after the specified impulse is applied 100000 times continuously with the interval of 10 seconds at room temperature. Type Part Number Waveform Current ERZVF1M220 to ERZVF1M680 8/20 µs 5 A VF1M ERZVF1M820 to ERZVF1M271 8/20 µs 25 A ERZVF1M331 to ERZVF1M471 8/20 µs 20 A VF1T1 ERZVF1T820 to ERZVF1T271 8/20 µs 14 A CF ERZCF 1MK220 to ERZCF 1MK680 2 ms 0.45 A ERZCF 1MK820 to ERZCF 1MK471 8/20 µs 14 A ERZSF 1MK220 to ERZSF 1MK680 8/20 µs 12 A SF ERZSF 1MK820 to ERZSF 1MK271 8/20 µs 35 A ERZSF 1MK331 to ERZSF 1MK471 8/20 µs 28 A ÆVCmA/VCmA < ±10 % ÆVCmA/VCmA < ±10 %