SERIES 60,000 PSI tensile strength electro-less nickel rod bearing High strength threaded connection Hard chrome plated 100,000 PSI yield strength rod inc plated dust cover series Stopper Cylinders Common Features Nason s series stopper cylinders were designed for today s demanding conveyor systems. ith more power in a smaller package, the series stopper cylinder is offered in seven different mounting styles with three different rod end configurations to fit into almost any design situation. Compact Size Nason s series cylinders were designed with todays conveyor systems in mind. Five bore sizes with a variety of strokes and rod end options ensure a perfect fit for each application. Nason is able to fit a larger bore size into the same package as comparable competitive products. Low friction cup sealintegral rod wiper Double wound 302 SS retaining wire Machined bore anodized aluminum housing piston, available Rugged Construction The series incorporates 60,000 PSI tensile strength bearings with an oversized 100,000 PSI yield strength rod for maimum stopping power. Versatile Design The series stopper cylinders are metric in design (bore & rod size). They are offered in inch or metric mounting and porting. Five different threaded mounting options and two different flange mounting options ensure an eact fit into today s tight space requirements. Due to their 100% machined design they are easily customized by Nason. Rebuildable All series cylinders are field rebuidable. Low friction figure 8 piston seal
TABLE OF CONTENTS Series Stopper Cylinders How to Order 75 Engineering Data 76 Bore 77 25mm Bore 80 32mm Bore 83 40mm Bore 86 50mm Bore 89 Rod End Styles 92 Flange Mount 93 NE product
75 How to Order How to Order Eample: Part Number:-3215FS-EMHS 32 15 FS EM HS BORE STROKE MOUNTING OPTIONS ROD STLE MAGNETIC MOUNTING - Stopper Cylinder MF - Threads on Front Face (Rod End) MR - Threads on Rear Face (Opposite Rod) BORE 20-25 - 25mm (.98") 32-32mm (1.26") 40-40mm (1.58") 50-50mm (1.97") STROKE MAGNETIC ROD STLE BLANK (No Code) - Round Rod F - Flat Rod - Flat Rod with Roller MB - Threads on Both Faces MT - Drilled Through and Counterbored for Bolt Clearance MS - Threads on Side of Cylinder Body FR - Flange on Rear Face (Opposite Rod) FS - Flange on Side of Cylinder Body Bore 10 - Stroke BLANK (No Code) - Standard "NO MAGNET" Piston 15-15mm Stroke M - Piston and Sensor Mounting 10 - Stroke 25mm Bore 15-15mm Stroke 20 - Stroke 10 - Stroke OPTIONS 32mm Bore 15-15mm Stroke EM - InchThreads (Mounting and Ports) 40mm Bore 20 - Stroke HS - High Temperature Seals -10 C to 150 C 20 - Stroke (0 F to 302 F) 25-25mm Stroke UR - Urethane Shock Pad Rear (Opposite Rod) 30-30mm Stroke 20 - Stroke 50mm Bore 25-25mm Stroke 30-30mm Stroke
76 Operating Media: Maimum Operating Pressure: Operating Temperature: Packing: Lubrication: Stroke Tolerance: Unit eights BORE 20 25 32 40 50 kg (lbs) Operating Ranges eight - kilograms (pounds) 55 (121) 45 (99) 30 (66) 25 (55) 20 (44) 15 (33) 10 (22) 5 (11) 4 (8.8) 3 (6.6) 2 (4.4) -50-40 -32-25 -20 STROKE 10 15 20 25 30 0.15 0.16 (.34) (.36) 0.21 0.23 0.24 (.47) (.50) (.53) 0.43 0.45 0.48 (.94) (1.0) (1.06) 1 (2.2) 1 5 10 15 20 (3.3) (16.5) (33) (49.5) (66) Speed - meters/minute (feet/minute) 0.74 0.79 0.83 (1.67) (1.75) (1.83) 1.10 1.15 1.19 (2.43) (2.53) (2.63) Air (Clean, Dry or Lubricated) 17 Bar (250 PSI) -10 C to 95 C (0 F to 200 F) Buna N PTFE impregnated grease +1,0mm/-0mm (+0.04"/-0") Engineering Data Minimum Operating Pressure for Load Pressure - Bar (PSI) 10 (145) 9 (130.5) 8 (116) 7 (101.5) 6 (87) 5 (72.5) 4 (58) 3 (43.5) 2 (29) 1 (14.5) 0-20 -25-32 -40-50 10 (22) 20 (44) 30 (66) 40 (88) 50 (110) 60 (132) 70 (154) 80 (176) Lateral load - kilograms (pounds)
77 Non Front Mount Cylinder "MF" 4,5 (.18") PUSH 3,14 cm (0.48 in ) 38,0 (1.50") 15mm PULL 2,32 cm (0.36 in ) 4,5 (.18") Non Thru Mount Cylinder "MT" 4,5 (.18") 30,0 SQ. (1.181") 20 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) ÿ 20,0 38,0 (1.50") 15mm 4,5 (.18") 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) 30,0 SQ. (1.181") 18,0 (.71") BORE STROKE ROD STLE MOUNTING OPTIONS 10 - STROKE 15-15mm STROKE TAP 11 (.44") DP PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) ÿ 20,0 18,0 (.71") 4,2 (ÿ.165") DRILL THRU 7,6 (ÿ.30") C'BORE 4,5 (.18") DP (2 PLACES, OPPOSITE FACE) BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) (3/4") Bore 5,6 (.22") M50,8 #10-32 M50,8 #10-32 Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) M50,8 #10-32 5,6 (.22")
78 Front Mount Cylinder "MF" 4,5 (.18") 4,5 (.18") Thru Mount Cylinder "MT" 4,5 (.18") PUSH 3,14 cm (0.48 in ) 38,0 (1.50") 15mm PULL 2,32 cm (0.36 in ) 4,5 (.18") 30,0 SQ. (1.181") 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) 30,0 SQ. (1.181") SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) 20 ÿ 20,0 18,0 (.71") (2 PLACES, 180 APART) TAP 12,7 (.50") DP PUSH 3,14 cm (0.48 in ) 38,0 (1.50") 15mm PULL 2,32 cm (0.36 in ) 18,0 (.71") ÿ 20,0 4,2 (ÿ.165") DRILL THRU 7,6 (ÿ.30") C'BORE 4,5(.18") DP (2 PLACES, OPPOSITE FACE) (3/4") Bore 5,6 (.22") M50,8 #10-32 M50,8 #10-32 Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" M50,8 #10-32 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15-15mm STROKE (2 PLACES, 180 APART BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) M MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) 5,6 (.22") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
79 Non Side Mount Cylinder "MS" 4,5 (.18") 10,0 (.39") TAP 6,1 DP. (4 PLACES) Side Mount Cylinder "MS" 4,5 (.18") 10,0 (.39") 38,0 (1.50") 15mm 38,0 (1.50") 15mm TAP 6,1 DP. (4 PLACES) 20 SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) 20,0 (.79) (2 PLACES, 180 APART) 30,0 SQ. (1.181") PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) 20,0 (.79) 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) 30,0 SQ. (1.181") 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) (3/4") Bore 18,0 (.71") 18,0 (.71") ÿ 20,0 ÿ 20,0 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15-15mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) M50,8 #10-32 M40,7 #8-32 M50,8 #10-32 M40,7 #8-32 5,6 (.22") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS 5,6 (.22")
80 Non Front Mount Cylinder "MF" 4,75 (.19") 4,75 (.19") 25,4 (1.00") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) 15mm 38,0 (1.50") 35,0 SQ. (1.378") 25,4 (1.00") Non Thru Mount Cylinder "MT" 4,75 (.19") 25,4 (1.00") 4,75 (.19") 15mm 38,0 (1.50") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) 25 35,0 SQ. (1.378") 25,4 (1.00") ÿ 24,0 (.95") PUSH 4,91 cm (0.76 in ) PULL 3,81 cm (0.59 in ) 22,0 (.87") TAP 12,7 (.50") DP 20,8 (.82") PUSH 4,91 cm (.76 in ) PULL 3,81 cm (.59 in ) ÿ 24,0 (.95") 22,0 (.87") BORE STROKE ROD STLE MOUNTING OPTIONS 10 - STROKE 15-15mm STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) 4,2 (ÿ.165") DRILL THRU 7,6 (ÿ.30") C'BORE 4,5 (.18") DP (2 PLACES, OPPOSITE FACE) 25mm (1.0") Bore M50,8 #10-32 M50,8 #10-32 6,1 Rear Mount Cylinder "MR" M50,8 #10-32 20,8 (.82") Mount Both End Cylinder "MB" 6,1 UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
81 Front Mount Cylinder "MF" 4,75 (.19") 4,75 (.19") 25,4 (1.00") 15mm 38,0 (1.50") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) 35,0 SQ. (1.378") 25,4 (1.00") Thru Mount Cylinder "MT" 4,75 (.19") 25,4 (1.00") 4,75 (.19") 15mm 38,0 (1.50") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) 35,0 SQ. (1.378") 25,4 (1.00") 25 SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) ÿ 24 (.95") PUSH 4,91 cm (0.76 in ) PULL 3,81 cm (0.59 in ) 22,0 (.87") TAP 12,7 (.50") DP (2 PLACES, 180 APART) PUSH 4,91 cm (.76 in ) PULL 3,81 cm (.59 in ) 20,7 (.82") (2 PLACES, 180 APART) ÿ 24,0 (.95") 25mm (1.0") Bore 22,0 (.87") M50,8 #10-32 M50,8 #10-32 6,1 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15-15mm STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) 4,2 (ÿ.165") DRILL THRU 7,6 (ÿ.30") C'BORE 4,5(.18") DP (2 PLACES, OPPOSITE FACE) M Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" M50,8 #10-32 20,7 (.82") MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) 6,1 UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
82 Non Side Mount Cylinder "MS" 4,75 (.19") 10,0 (.39") 15mm 38,0 (1.50") 25,4 (1.00") TAP 7,6 (.30") DP (4 PLACES) PUSH 4,91 cm (0.76 in ) PULL 3,81 cm (0.59 in ) 20,0 Side Mount Cylinder "MS" 4,75 (.19") 10,0 (.39") 15mm 38,0 (1.50") 25,5 (1.00") TAP 7,6 (.30") DP (4 PLACES) 25 SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) 35,0 SQ. (1.378") PUSH 4,91 cm (0.76 in ) PULL 3,81 cm (0.59 in ) 20,0 22,0 (.87") 25mm (1.0") Bore ÿ 24,0 (.95") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) 35,0 SQ. (1.378") 22,0 (.87") (2 PLACES, 180 APART) 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) ÿ 24,0(.95") BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15-15mm STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) M50,8 #10-32 M50,8 #10-32 20,8 (.82") M50,8 #10-32 M50,8 #10-32 20,8 (.82") 6,1 UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS 6,1
83 Non Front Mount Cylinder "MF" 5,3 (.21") Non Thru Mount Cylinder "MT" 32mm (1-1/4") Bore PUSH 8,04 cm (1.25 in ) G 1/8 PORT 1/8-27 15mm 44,0 (1.73") M61,0 1/4-20 PULL 4,91 cm (0.76 in ) 5,3 (.21") 31,5 (1.24") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) 5,3 (.21") 31,5 (1.24") 5,3 (.21") 42,0 SQ. (1.654") 31,5 (1.24") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) 42,0 SQ. (1.654") 31,5 (1.24") 4,4 (.17") ÿ 36,0 (1.42") 20,0 TAP 16,0 (.63") DP 4,4 (.17") 25,1 (.99") PUSH 8,04 cm (1.25 in ) 15mm 44,0 (1.73") PULL 4,91 cm (0.76 in ) ÿ 36,0 (1.42") 20,0 32 BORE STROKE ROD STLE MOUNTING OPTIONS 10 - STROKE 15-15mm STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) 5,2 (ÿ.204") DRILL THRU 8,6 (ÿ.34") C'BORE 5,6 (.22") DP (2 PLACES, OPPOSITE FACE) 8,4 (.33") 7,1 (.28") Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" G 1/8 PORT 1/8-27 25,1 (.99") 8,4 (.33") 7,1 (.28") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
84 Front Mount Cylinder "MF" 5,3 (.21") Thru Mount Cylinder "MT" 32mm (1-1/4") Bore G 1/8 PORT 1/8-27 PUSH 8,04 cm (1.25 in ) 15mm 44,0 (1.73") M61,0 1/4-20 PULL 4,91 cm (0.76 in ) 5,3 (.21") 31,5 (1.24") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) 5,3 (.21") 5,3 (.21") 31,5 (1.24") 42,0 SQ. (1.654") 31,5 (1.24") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) 42,0 (1.654") SQ. 31,5 (1.24") 4,4 (.17") 15mm 44,0 (1.73) 32 SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) ÿ 36,0 (1.42") (2 PLACES. 180 APART) 4,4 (.17") 20,0 TAP 16,0 (.63") DP 25,1 (.99") PUSH 8,04 cm (1.25 in ) PULL 4,91 cm (0.76 in ) (2 PLACES. 180 APART) ÿ 36,0 (1.42") 5,2 (ÿ.204") DRILL THRU 8,6 (ÿ.34") C'BORE 5,6 (.22") DP (2 PLACES, OPPOSITE FACE) 20,0 8,4 (.33") 7,1 (.28") Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" G 1/8 PORT 1/8-27 25,1 (.99") BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15-15mm STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) M MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) 8,4 (.33") 7,1 (.28") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
85 Non Side Mount Cylinder "MS" 12,0 (.47") PUSH 8,04 cm (1.25 in ) 15mm 44,0 (1.73") PULL 4,91 cm (0.76 in ) 15,5 (.61") TAP 8,0 (.32") DP (4 PLACES) 31,5 (1.24") Side Mount Cylinder "MS" 12,0 (.47") 15mm 44,0 (1.73") 15,5 (.61") TAP 8,0 (.32") DP (4 PLACES) 32 SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) 31,5 (1.24") 5,3 (.21") 42,0 SQ. (1.654") PUSH 8,04 cm (1.25 in ) PULL 4,91 cm (0.76 in ) 5,3 (.21") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) 42,0 SQ. (1.654") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) 32mm (1-1/4") Bore 4,4 (.17") 20,0 ÿ 36,0 (1.42") 4,4 (.17") 20,0 ÿ 36,0 (1.42") (2 PLACES. 180 APART) BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15-15mm STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) G 1/8 PORT 1/8-27 M50,8 #10-32 25,1 (.99") G 1/8 PORT 1/8-27 M50,8 #10-32 25,1 (.99") 8,4 (.33") 7,1 (.28") 8,4 (.33") 7,1 (.28") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
86 Non Front Mount Cylinder "MF" 6,0 Non Thru Mount Cylinder "MT" 38,0 (1.50") PUSH 12,56 cm (1.95 in ) 25mm 47,0 (1.85") 30mm PULL 9,42 cm (1.46 in ) 6,0 25.0(Ø.984") ROD (ROD FLUSH ITH FACE) 50,0 SQ. (1.968") 38,0 (1.50") 3,6 (.14") 25mm 47,0 (1.85") 30mm 6,0 6,0 38,0 (1.50") 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) 50,0 SQ. (1.968") 38,0 (1.50") Ø44,0 (1.73") 26,4 (1.04") PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) 40mm (1-1/2") Bore 9,9 (.39") TAP 15,2(.60") DP 3,6 (.14") 5,2 (Ø.204") DRILL THRU 8,6 (Ø.34") C'BORE 5,6(.22") DP (2 PLACES, OPPOSITE FACE) Ø44,0 (1.73") 40 BORE STROKE ROD STLE MOUNTING OPTIONS 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) G 1/8 PORT 1/8-27 M61,0 1/4-20 Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" G 1/8 PORT 1/8-27 26,4 (1.04") 9,9 (.39") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
87 Front Mount Cylinder "MF" 6,0 Thru Mount Cylinder "MT" 38,0 (1.50") 25mm 47,0 (1.85") 30mm 6,0 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) 50,0 SQ. (1.968") 38,1 (1.50") 3,6 (.14") 25mm 47,0 (1.85") 30mm 6,0 38,0 (1.50") 6,0 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) 40 50,0 SQ. (1.968") 38,0 (1.50") SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) Ø44,0 (1.73") (2 PLACES. 180 APART) PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) TAP 15,2 (.60") DP 26,4 (1.04") PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) 3,6 (.14") (2 PLACES. 180 APART) 5,2 (Ø.204") DRILL THRU 8,6 (Ø.34") C'BORE 5,6 (.22") DP (2 PLACES, OPPOSITE FACE) Ø44,0 (1.73") 40mm (1-1/2") Bore G 1/8 PORT 1/8-27 M61,0 1/4-20 9,9 (.39") Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" G 1/8 PORT 1/8-27 26,4 (1.04") BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) M MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) 9,9 (.39") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
88 Non Side Mount Cylinder "MS" 12,0 (.47") 25mm 47,0 (1.85") 30mm 25,0 (.98") TAP 9,7 (.38") DP (4 PLACES) 38,0 (1.50") Side Mount Cylinder "MS" 12,0 (.47") 25mm 47,0 (1.85") 30mm 25,0 (.98") TAP 9,7 (.38") DP (4 PLACES) 40 SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) 38,0 (1.50") 6,0 6,0 50,0 SQ. (1.968") PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) 50,0 SQ. (1.968") 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) 40mm (1-1/2") Bore 3,6 (.14") 3,6 (.14") G 1/8 PORT 1/8-27 M61,0 1/4-20 Ø44,0 (1.73") Ø44,0 (1.73") (2 PLACES. 180 APART) BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) 26,4 (1.04") 26,4 (1.04") G 1/8 PORT 1/8-27 M61,0 1/4-20 9,9 (.39") 9,9 (.39") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
89 Non Front Mount Cylinder "MF" 6,5 (.26") 6,5 (.26") 50,0 (1.97") 25mm 49,5 (1.95") 30mm 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) 63,0 (2.48") SQ. 50,0 (1.97") Non Thru Mount Cylinder "MT" 6,5 (.26") 6,5 (.26") 50,0 (1.97") 25mm 49,5 (1.95") 30mm 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) 50 63,0 (2.48") SQ. 50,0 (1.97") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) 2 (1.06") ÿ 56,0 (2.21") TAP 20,3 (.80") DP PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) 2 (1.06") ÿ 56,0 (2.21") 6,8 (ÿ.268") DRILL THRU 10,4 (ÿ.41") C'BORE DP (2 PLACES, OPPOSITE FACE) 50mm (2.0") Bore BORE STROKE ROD STLE MOUNTING OPTIONS 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) G 1/8 PORT 1/8-27 M81,25 5/16-18 10,9 (.43") Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" G 1/8 PORT 1/8-27 10,9 (.43") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
90 Front Mount Cylinder "MF" 6,5 (.26") 6,5 (.26") 50,0 (1.97") 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) 63,0 SQ. (2.48") 50,0 (1.97") Thru Mount Cylinder "MT" 6,5 (.26") 25mm 49,5 (1.95") 30mm 6,5 (.26") 50,0 (1.97") 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) 25mm 49,5 (1.95") 30mm 63,0 SQ. (2.48") 50,0 (1.97") 50 SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) 2 (1.06") ÿ 56,0 (2.21") (2 PLACES. 180 APART) PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) TAP 20,3(.80") DP PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) (2 PLACES. 180 APART) 6,8 (ÿ.268") DRILL THRU 10,4 (ÿ.41") C'BORE DP (2 PLACES, OPPOSITE FACE) 2 (1.06") ÿ 56,0 (2.21") 50mm (2.0") Bore G 1/8 PORT 1/8-27 M81,25 5/16-18 10,9 (.43") BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) M Rear Mount Cylinder "MR" Mount Both End Cylinder "MB" G 1/8 PORT 1/8-27 MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) 10,9 (.43") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
91 Non Side Mount Cylinder "MS" 12,0 (.47") 25mm 49,5 (1.95") 30mm 25,0 (.98") TAP 12,0 (.47") DP (4 PLACES) 50,0 (1.97") Side Mount Cylinder "MS" 12,0 (.47") 25mm 49,5 (1.95") 30mm 25,0 (.98") TAP 12,0 (.47") DP (4 PLACES) 50 SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) 50,0 (1.97") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) 6,5 (.26") 6,5 (.26") 63,0 SQ. (2.48") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) 63,0 SQ. (2.48") 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) 50mm (2.0") Bore G 1/8 PORT 1/8-27 M81,25 5/16-18 2 (1.06") ÿ 56,0 (2.21") 2 (1.06") ÿ 56,0 (2.21") (2 PLACES. 180 APART) BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) G 1/8 PORT 1/8-27 M81,25 5/16-18 10,9 (.43") 10,9 (.43") UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
92 Round Rod - Rod Code Blank (No Code) DIA. (SHON ETENDED) Flat Rod - Rod Code"F" Bore "D" "E" 20 25 32 40 50 DIA. (SHON ETENDED) Flat Rod ith Roller - Rod Code - "" Standard orientation for flat is side "". Flat can be reoriented to any position. DIA. Standard orientation for flat is side "". Flat can be reoriented to any position. - Rod shown etended on Round Rod and Flat Rod Styles - Roller material: Plastic ORKPIECE TRANSFER DIRECTION ORKPIECE TRANSFER DIRECTION "E" STROKE (RETRACTS FLUSH) STROKE (RETRACTS FLUSH) SHON RETRACTED "F" DIA. 10,0(0.394") 8,0(0.315") 3,5 (.14") 6,35(0.25") 8,5 (0.33") 8,0 (0.32") 12,0(0.472") 10,0(0.394") 4,0(.16") 8,6(0.34") 11,0 (.43") 10,0 (0.39") 20,0(0.787") 18,0(0.709") 25,0(0.984") 22,5(0.886") 25,0(0.984") 22,5(0.886") 8,0 (.32") 9,0 (.35") 9,0 (.35") 17,0(0.67") 20,6(0.81") 20,6(0.81") 19,0 (.75") 25,0 (.98") 25,0 (.98") 18,0 (0.71") 24,0 (0.95") 24,0 (0.95") Rod End Styles SHON ETENDED SHON ETENDED "F"
93 Rear Face Flange Mount - "FR" "D" Bore 20 25 32 40 50 "G" "H" "F" "E" FLANGE CAN BE ROTATED 90 Rear Face Flange Mount "D" "E" "F" "G" "H" 5,4 (.21") 40,0 (1.58") 31,8 (1.25") 15,9 (.63") 50,8 (2.0") 9,5 (.38") 4,5 (.18") 25,4 (1.0") 3,9 (.15") 43,0 (1.69") 38,1 (1.50") 19,05 (.75") 63,5 (2.5") 5,75 (.23") 52,0 (2.05") 31,8 (1.25") 44,5 (1.75") 22,25 (.88") 9,5 (.38") 5,5 (.22") 76,2 (3.0") 8,1 (.32") 60,0 (2.36") 38,1 (1.50") 50,8 (2.00") 25,4 (1.00") 93,0 (3.66") 12,7 (.50") 7,5 (.30") 78,0 (3.07") 8,5 (.33") 46,5 (1.83") 63,5 (2.50") 31,8 (1.25") Side Flange Mount - "FS" "J" Bore 20 25 50,8 (2.00") 9,5 (.38") SEE INDIVIDUAL PRODUCT PAGE FOR CLINDER DIMENSIONS 5,4 (.21") "D" 40 (1.58") 3,9 (.15") 43 (1.69") 32 63,5 (2.50") 5,75 (.23") 52 (2.05") 9,5 (.38") 40 76,2 (3.00") 8,1 (.32") 60 (2.36") "E" 4,5 (.18") 5,5 (.22") 50 93 (3.66") 12,7 (.50") 7,5 (.30") 78 (3.07") 8,5 (.33") SEE INDIVIDUAL PRODUCT PAGE FOR CLINDER DIMENSIONS Material: Anodized Aluminum "H" "F" "G" 19 (.75") "F" "G" 9,5 (.38") 25,4 (1.00") 12,7 (.50") "F" "G" "E" (4 PLACES) "H" "D" Material: Anodized Aluminum 19.5 (.77") 16,25 (.64") 25,75 (1.01") "J" 25,4 (1.0") 31,8 (1.25") 38,1 (1.50") 46,5 (1.83")
1307 S Highway 11 alhalla 29691 800.229.4955 Phone: 864.638.9521 Fa: 864.638.7903 Orders: 800.229.4955 www.nasonptc.com ARRANT: It is the sole responsibility of the user to determine the suitability of any product or information supplied by Nason for any application or use by the user. THE FOLLOING IS IN LIEU OF ALL OTHER ARRANTIES, EPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILIT AND FITNESS FOR A PARTICULAR PURPOSE. The Nason Company warrants each product to be free from defects in material and workmanship under normal use and service. Nason s obligation under this warranty is limited to repairing of or supplying, at our option, a part or parts to replace any defective part(s) within one (1) year from the date of original sale. ear components including but not limited to seals, wear bands, and bearings are ecluded from this warranty. No product will be returned without prior authorized approval. If authorized, the transportation charges are to be prepaid to The Nason Company, alhalla,. Unauthorized returns will be returned freight collect. The provisions of this warranty will not apply to any part(s) which have been subject to misuse, negligence, or accident, or which have been repaired or altered outside of The Nason Company service department in any way so as in the judgement of Nason to adversely affect its performance, stability, or reliability. The Nason Company neither assumes nor authorizes anyone to assume for it any other obligation or liability for any loss or damage either direct, incidental or consequential resulting from or arising out of or in connection with any of its defective part(s). Nason will not be responsible for any labor or other charges in connection with the removal of a product deemed to be defective or for installation or replacement of a defective or repaired product. Buyer s sole remedies are as provided herein. In no event shall Nason be liable for any cost of Buyer s cover, or for any indirect, special, consequential, incidental, or punitive damages of any sort, whether based on tort or breach of contract and/or warranty. NAS-CL 6/10 Request Nason s catalog of custom engineered switches by calling toll free 800-229-4955 or visit our website at www.nasonptc.com