ISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings

Similar documents
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:

Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:

2. COMPACT CYLINDERS series STRONG (RS, RQ)

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm

Short-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread

Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread

Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552

Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217

TELESCOPIC CYLINDERS ø mm Series RT

AIR CYLINDER Series A12, A13

Aluminium tube and profile

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Cylinders Series 61 - Aluminium profile

Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Tie rod cylinders, Series 523

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm

AIR CYLINDER Series A23, A24

TECHNICAL CHARACTERISTICS

Pneumatic cylinders, piston-ø 8 25 mm Single acting DIN ISO 6432

RT2 RT3. ORIGINAL UNIVER Original design and technology. INDUSTRIALIZED Industrialized components and advanced technology

Series 63 ISO cylinders

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Double acting, cushioned, magnetic Ø mm

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm

ISO Technical details

Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25

XG*-***-****-***-****

bar -20 C C ( C for high temperature version) 1000 mm

Cylinders ISO Bores from 32 to 125 mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

ISO 6020/2 industricylindre Industrial cylinders

Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm

ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR

Our policy is one of continued research and development. We therefore reserve the right to amend,

ISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR

VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring

AIR CYLINDER Series A25, A26

BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

Strokes (mm) N/en

compact magnetic cylinders

N/** поставка оборудования для подготовки воздуха

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Sizes 32, 40, 50 and 63

SHORT STROKE CYLINDERS, Ø 20 to 100 mm

CYLINDERS. Moving more than air

Directional valves Pneumatically operated, according to standard ISO , 18 mm, CD02-AL series. Brochure

Pneumatic cylinders Compact cylinders Series P1J

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity

Stainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)

BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,

AUTO STAR with central connector M12x1

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm

AIR CYLINDER Series A75, A76

V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves

Nugget 40, V08 series

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)

SUMMARY KIT PNEUMATIC MOTION

Valve terminal systems Valve terminal systems Series TC15. Brochure

ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning

V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LRM/55401/M, Roundline cylinder Magnetic piston, double acting

Climax Pneumatics. Cnomo NFE Cylinders Easley, South Carolina

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95

HERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories

Our policy is one of continued research and development. We therefore reserve the right 1/98 N

PRA/182000, PRA/182000/M

Our policy is one of continued research and development. We therefore reserve the right 10/99 N

Construction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston

ISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m

VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm

M/1000, Heavy Duty Cylinders Double Acting

Large Bore Extruded Cylinders, ISO 6431 Series 41

ISO/VDMA Series ISO 6431 and VDMA Cylinder Line

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)

ISO CYLINDERS Ø ACTUATORS

Short-stroke cylinders ADVC/AEVC

Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287

Electric Drives. Linear Motion and Assembly Technologies Pneumatics Service. Valves, Series VP15. Technical data

5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals

Transcription:

ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid Valves 216 217-218 219 220 Series 70 & 80 Solenoid Valves Modular FRL Series Modular FRL Series, Valves Modular FRL Series, Accessories 221 222-229 230-231 232 Associated Products Nylon & Polyurethane Tubing Pneumatic Push-in Fittings Speed Controllers Plastic Finger Tight Fittings Section 10 Section 6 Section 3 Section 6 205

PNEUMATICS IT STHATEASY www.aventics.co.uk www.facebook.com/aventicsuk/ 085 6030025 www.twitter.com/aventicsuk sales.gb@aventics.com www.linkedin.com/groups/8160615 AVENTICS UK Unit C6, Sunningdale House, Caldecotte Lake Business Park, Milton Keynes MK7 8LF, www.aventics.co.uk 206

Air Cylinders General Specifications Connecting threads: M5 and G1/8 Installation position: any Ambient temperature: -25ºC to +80ºC Maximum temperature of medium: +80ºC Pneumatic Minimum acceptable pressure: 1 bar Rated pressure: 10 bar Dimensions Design Internationally exchangeable, standardised port threads (DIN ISO) Proximity switching (permanent magnet) Adjustable stroke-end cushioning Suitable for oil-free operation Long service life due to low-friction sealing elements and self-lubricating bearing bushing Cylinder tube: stainless steel, crimped at head and base Head and base: anodized aluminium profile Solid piston with stop disks Seals: groove rings of Perbunan 1 Piston rod: stainless steel, smooth rolled Modular system: mounting hardware 1 Bayer Cyl AM BE BF CD E EE EW KK KV KW KX KY L MM MR PB VA WF XC Y ZN 1 2-2 H9 d13 x 1.25 d9 ±1 ±1.2 ±1 ±1 ±1 h12 h12 Ø mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 10 12 M12 x 1.25 11 1 M5 8 M 17 5.5 7 2.2 6 12 37 11 16 6 21 73.5 13 3 12 16 M16 x 1.5 16 6 19 M5 12 M8 22 6 10 3.2 9 6 16 1 16 22 75 27 88.5 19 5 16 16 M16 x 1.5 16 6 19 M5 12 M6 22 6 10 3.2 9 6 16 7 17 22 82 27 95.5 19 5 20 20 M22 x 1.5 18 8 28 G1/8 16 M8 30 7 13 12 8 18 51 19 2 95 32 109.5 28 6 25 22 M22 x 1.5 21 8 28 G1/8 16 M10 30 7 17 12 10 19 55 21 28 10 36 119.5 28 8 ISO 632 Cylinder Double Acting, Cushioned, Magnetic Ø mm Stroke mm 0822332501 16 10 57.60 0822332502 16 25 57.86 0822332503 16 50 58.29 082233250 16 80 58.82 0822332505 16 100 59.17 0822332506 16 125 59.60 0822332507 16 160 60.22 0822332508 16 200 60.91 0822333501 20 10 6.00 0822333502 20 25 6.39 0822333503 20 50 65.01 082233350 20 80 65.76 0822333505 20 100 66.26 0822333506 20 125 66.90 0822333507 20 160 67.77 0822333508 20 200 68.77 0822333509 20 250 70.03 0822333510 20 320 71.79 1) PB + stroke 2) G1/8 8 deep 3) XC + stroke ) ZN + stroke Ø mm Stroke mm 082233501 25 10 69.86 082233502 25 25 70.30 082233503 25 50 71.03 08223350 25 80 71.92 082233505 25 100 72.51 082233506 25 125 73.25 082233507 25 160 7.28 082233508 25 200 75.6 082233509 25 250 76.93 082233510 25 320 78.99 082233511 25 00 81.35 082233512 25 500 8.30 Section 207

Cylinder Mountings Foot Mounting ISO 632 Cylinders For Cylinder Ø 1821332029 10 2.66 1821332028 12/16 3.23 1821332027 20/25.01 Cylinder Head Nut ISO 632 Cylinders For Cylinder Ø Thread 182330002 10 M12 x 1.25 2.8 2915A5120 12/16 M16 x 1.5 1.29 2915051207 20/25 M22 x 1.5 2.53 Flange Mounting ISO 632 Cylinders For Cylinder Ø 1821036012 10 2.36 1821036011 12/16 2.66 1821036010 20/25 3.23 Ambient temperature: -20ºC to +75ºC Switch point accuracy: ±0.1mm Maximum shock resistance: 50g/11ms (contact closes) Vibration resistance: 30g (50-100Hz) Section Counter Support ISO 632 Cylinders For Cylinder Ø 18270017 10 10.37 18270016 12/16 12.89 18270015 20/25 1.9 Fork Clevis ISO 632 Cylinders For Cylinder Ø Thread 1822122028 10 M.30 1822122009 12/16 M6.98 1822122010 20 M8 5.6 182212202 25 M10 x 1.25 5.96 Spherical Rod Eye ISO 632 Cylinders For Cylinder Ø Thread 182212000 10 M 16.95 182212001 12/16 M6 18.31 182212002 20 M8 18.56 182212003 25 M10 x 1.25 23.65 Piston Rod Nut ISO 632 Cylinders For Cylinder Ø Thread 81030011 10 M 2.36 1823300033 12/16 M6 2.53 182330003 20 M8.61 1823300020 25 M10 x 1.25 2. Reed Switch ISO 632 Cylinders, with Cable Designation Cable 0830100365 Cable, 2 Wire 3m PVC 28.9 0830100368 Cable, 2 Wire 3m PVC 28.32 0830100371 Cable, 3 Wire 3m PVC 3.6 Reed Switch ISO 632 Cylinders, with Plug Connection Designation Cable 0830100365 Cable, 2 Wire 3m PVC 28.9 0830100368 Cable, 2 Wire 3m PVC 28.32 0830100371 Cable, 3 Wire 3m PVC 3.6 Reed Switch ISO 632 Cylinders, with Socket Couplings Description 1838166 Straight M8 x1 16.00 1838167 Angular M8 x1 16.00 Reed Switch Clamp ISO 632 Cylinders For Cylinder Ø 1827020065 10 5.61 1827020066 12 5.61 1827020067 16 5.61 1827020068 20 5.61 1827020069 25 5.61 208

Air Cylinders Technical Information Standards: ISO 15552 Compressed air connection: internal thread Working pressure range: 1.5-10 bar Ambient temperature range: -20ºC to +80ºC Medium: compressed air Maximum particle size: 50µm Oil content of compressed air: 0-5mg/m 3 Pressure for determining piston forces: 6.3 bar Cylinder tube: aluminum, anodized Piston rod: stainless steel Front cover: die-cast aluminium End cover: die-cast aluminium Seal: polyurethane Nut for piston rod: steel, galvanized Scraper: polyurethane Dimensions Ø A -2 AF +1 ØB d11 ØBA d11 BG min E EE G H KF KK 32 22 12 30 30 16 6.5 G1/8 27.75 7.5 M6 M10 x 1.25 0 2 13.5 35 35 16 53 G1/ 33.25 53 M8 M12 x 1.25 50 32 17 0 0 16 65 G1/ 31 65 M10 M16 x 1.5 63 32 17 5 5 16 75 G3/8 38.25 75 M10 M16 x 1.5 80 0 21 5 5 17 95 G3/8 38.25 95 M12 M20 x 1.5 100 0 21 55 55 17 115 G1/2 2.25 115 M12 M20 x 1.5 125 5 28 60 60 20 10 G1/2 53.85 10 M16 M27 x 2 Ø KV KW Ømm f8 PL L2 L3 ±0,5 L8 RT SW TG VA -1 VD WH 32 16 5 12 16 16.25.5 9 ±0. M6 10 32.5 ±0.5 5 26 ±1. 0 18 6 16 20 18.25.5 105 ±0.7 M6 13 38 ±0.5 5 30 ±1. 50 2 8 20 19 25.5 106 ±0.7 M8 17 6.5 ±0.6 5 37 ±1. 63 2 8 20 2 25.5 121 ±0.8 M8 17 56.5 ±0.7 5 37 ±1.8 80 30 10 25 23.5 33 0 128 ±0.8 M10 22 72 ±0.7 5 6 ±1.8 100 30 10 25 25 36 0 138 ±1 M10 22 89 ±0.7 5 51 ±1.8 125 1 13.5 32 33 5 0 160 ±1 M12 27 110 ±1.1 6 7 65 ±2.2 Section 209

Air Cylinders Section ISO 15552 Cylinder Double Acting, Cushioned, Magnetic Ø mm Stroke mm 0822120001 32 25 101.23 0822120002 32 50 102.51 0822120003 32 80 10.05 082212000 32 100 105.07 0822120005 32 125 106.36 0822120006 32 160 108.15 0822120007 32 200 110.20 0822120008 32 250 112.77 0822120009 32 320 116.36 0822120010 32 00 120.6 0822120011 32 500 125.60 0822121001 0 25 113.62 0822121002 0 50 115.28 0822121003 0 80 117.28 082212100 0 100 118.61 0822121005 0 125 120.28 0822121006 0 160 122.60 0822121007 0 200 125.27 0822121008 0 250 128.60 0822121009 0 320 133.26 0822121010 0 00 138.59 0822121011 0 500 15.2 0822122001 50 25 130.7 0822122002 50 50 132.63 0822122003 50 80 135.21 082212200 50 100 136.9 0822122005 50 125 139.10 0822122006 50 160 12.11 0822122007 50 200 15.56 0822122008 50 250 19.87 0822122009 50 320 155.91 0822122010 50 00 162.81 0822122011 50 500 168.1 0822123001 63 25 153.53 Ø mm Stroke mm 0822123002 63 50 156.01 0822123003 63 80 158.99 082212300 63 100 160.98 0822123005 63 125 163.6 0822123006 63 160 166.9 0822123007 63 200 170.91 0822123008 63 250 175.88 0822123009 63 320 182.83 0822123010 63 00 190.78 0822123011 63 500 200.71 082212001 80 25 203.35 082212002 80 50 206.76 082212003 80 80 210.85 08221200 80 100 213.58 082212005 80 125 217.00 082212006 80 160 221.77 082212007 80 200 227.23 082212008 80 250 23.05 082212009 80 320 23.60 082212010 80 00 25.52 082212011 80 500 268.17 0822125001 100 25 28.77 0822125002 100 50 288.75 0822125003 100 80 293.5 082212500 100 100 296.72 0822125005 100 125 300.71 0822125006 100 160 306.29 0822125007 100 200 312.66 0822125008 100 250 320.63 0822125009 100 320 331.79 0822125010 100 00 3.5 0822125011 100 500 360.8 R801091 125 25 67.79 R801055 125 50 75.78 R8011371 125 80 85.37 R8007999 125 100 91.77 R8010083 125 125 99.77 R80079809 125 160 510.96 R8010833 125 200 523.76 R8011106 125 250 539.75 R8010759 125 320 562.1 R8011373 125 00 587.73 R8011666 125 500 619.71 210

Cylinder Mountings Foot Mounting ISO 15552 Cylinders For Cylinder 1827001271 32 12.90 1827001272 0 13.3 1827001273 50 15.59 182700198 63 18.05 1827001275 80 26.57 1827001276 100 30.53 1827001310 125 56.66 Counter Support ISO 15552 Cylinders For Cylinder 1827001283 32 18.70 182700128 0 19.21 1827001285 50 22.89 1827020086 63 28.5 1827001287 80 3.79 1827001288 100 3.2 182700866 125 99.8 Flange Mounting ISO 15552 Cylinders For Cylinder 1827001277 32 18.70 1827001278 0 19.0 1827001279 50 23.22 182700199 63 29.06 1827001281 80 3.1 1827001282 100 1.22 182700861 125 87.12 90º Counter Support ISO 15552 Cylinders For Cylinder 1825805275 32 20.78 1825805276 0 23.96 1825805277 50 27.55 1825805278 63 29.38 1825805279 80 0.85 1825805280 100 7.1 1825805281 125 76.30 Female Hinge ISO 15552 Cylinders For Cylinder 1827001289 32 18.70 1827001290 0 19.58 1827001291 50 23.79 1827001500 63 30.6 1827001293 80 36.95 182700129 100 7.05 182700862 125 97.20 Hinge Pin ISO 15552 Cylinders For Cylinder 1823120020 32 2.2 1823120021 0 2.38 1823120022 50 2.58 1823120023 63.3 182312002 80.90 1823120025 100 12.29 5236000092 125 15.7 Section 211

Cylinder Mountings & Accessories Piston Rod Nut ISO 15552 Cylinders Spherical Rod Eye ISO 15552 Cylinders For Cylinder Thread 1823300020 32 M10 x 1.25 2. 1823300021 0 M12 x 1.25 1.52 81030031 50/63 M16 x 1.5 1.85 8103003 80/100 M20 x 1.5 2.10 1823A00029 125 M27 x 2 13.35 For Cylinder Thread 182212003 32 M10 x 1.25 23.65 18221200 0 M12 x 1.25 28.99 182212005 50/63 M16 x 1.5.91 182212006 80/100 M20 x 1.5 57.32 182212013 125 M27 x 2 105.22 Fork Clevis ISO 15552 Cylinders For Cylinder Thread 182212202 32 M10 x 1.25 5.96 1822122025 0 M12 x 1.25 8.7 1822122005 50/63 M16 x 1.5 15.79 182212200 80/100 M20 x 1 0.18 Reed Switch ISO 15552 Cylinders, with 3m Lead Cable Kg 0830100629 3m, PUR 0.025 2.96 182700193 125 M27 x 2 75.63 General Specifications Mounting: DIN 8 M1.6 x 3 straightslotted screw-in groove for compact cylinder Ambient temperature: -20ºC to +80ºC Repeatability: ±0.1mm at 25ºC Maximum shock resistance: 50g/11ms (contact dose) Vibration resistance: 30g (50-1000Hz) Reed Switch For All Cylinders, with Socket Connector Electrical Contact: 1 n.o. contact Operating voltage (AC/DC): 10 to 30V Load current: 0.13 A AC, 0.13 A Operating current switched: < 10mA (no load) Power: 3 W/5 VA Switching response time: 10 to 30V On: approximately 0.5ms Off: approximately 0.1ms Electrical connection: PUR cable insulation 3 x 0.1mm 2 Enclosure protection class: IP 67, fully insulated Description Cable 083010088 LED, 3 Wire with Plug-in Connection 0.3m, PUR 28.38 1838166 Straight Socket Coupling with Cable, M8 x 1 3m 16.00 Section 1838167 Angular Socket Coupling with Cable, M8 x 1 3m 16.00 212

Compact Cylinders Technical Specifications Ambient temperature: -25ºC to +80ºC Maximum temperature of medium: +80ºC Pneumatic Minimum acceptable pressure: 1 bar Rated pressure: 10 bar Design Suitable for oil-free operation Piston rod: stainless steel, smooth rolled Cylinder and cover: anodized aluminium profile Cover screwed to housing galvanised screws Proximity-type: signalling Seals: polyurethane Elastic impact cushioning on cylinder Dimensions Ø AF BG ØDA ØDE ØDF ØDT E EE KF LA LB LJ LK LW ØMM PJ RT TG WH Y ZA ZJ 20 10 12.5 12 8 +0.2 6.2 8 36 M5 M6 2.5..5 2.5 10 22 M5 8 22 ±0 6 13.5 37 3 ±1 2 10 13 12 8 +0.2 6.2 8 0 M5 M6 2.5. 5. 2.5 10 2 M5 8 26 ±0. 6 13.5 39 5 ±1. 32 12 1.5 1 15 +0. 8.2 11 50 G1/8 M8 2.5 5. 5.1 2.5.5 12 29 M6 10 32 ±0.5 7 1.5 51 ±1.6 0 12 1.5 1 15 +0. 8.2 10 60 G1/8 M8 2.5 5. 9.6 2.5.5 12 30 M6 10 2 ±0.5 7 1.5 5 52 ±1 50 16 1.5 18 15 +0. 10.2 11 68 G1/8 M10 2.5 1.7 8.5 3.5 6 16 30 M8 13 50 ±0.6 8 15.5 5 53 ±1 63 16 1.5 18 15 +0. 10.2 11 8 G1/8 M10 2.5 1.7-17.8 3.5 6 16 3 M8 13 62 ±0.7 8 15.5 9 57 ±1 80 20 16.5 23 15 +0. 12.2 15 103 G1/8 M12 3 0.5-22.9 3.5 7 20 37.5 M10 16 82 ±0.7 10 18 5 6 ±2 100 2 19.5 28 15 +0. 16.2 15 12 G1/8 M16 3 3.5-27..5 8 25 7.5 M10 21 103 ±0.7 10 20 67 77 ±2 Compact Cylinder Double Acting, Cushioned, Magnetic Ø mm Stroke mm 0822391000 20 5 52.5 0822391001 20 10 53.25 0822391002 20 15 53.83 0822391003 20 20 5.6 082239100 20 25 55.13 0822391006 20 0 57.06 0822391007 20 50 58.0 0822392000 25 5 58.75 0822392001 25 10 59.89 0822392002 25 15 60.99 0822392003 25 20 62.16 082239200 25 25 63.22 0822392006 25 0 66.61 0822392007 25 50 68.8 0822393000 32 5 6.27 0822393001 32 10 66.21 0822393002 32 15 68.02 0822393003 32 20 69.90 082239300 32 25 71.86 Ø mm Stroke mm 0822395001 50 10 101.5 0822393006 32 0 77.1 0822393007 32 50 81.15 082239001 0 10 87.56 08223900 0 25 93.89 082239500 50 25 108.60 0822395007 50 50 120.56 0822396001 63 10 12.62 082239600 63 25 132.53 Section 082239007 0 50 10.37 0822396007 63 50 15.90 213

Compact Cylinders Technical Specifications Ambient temperature: -25ºC to +80ºC Maximum temperature of medium: +80ºC Pneumatic Minimum acceptable pressure: 1 bar Rated pressure: 10 bar Design Suitable for oil-free operation Piston and guide rods: stainless steel, smooth rolled Cylinder and cover: anodized aluminium profile Cover screwed to housing galvanised screws Proximity-type: signalling Seals: polyurethane Elastic impact cushioning on cylinder Dimensions Ø BC BG DA DE DG DT DX E EE FA LA LB LE LJ LM LW PL RT TG WH Y ZA 16 M3 12.5 10 8 3 6 6 29.5 M5 9.9 2.5 5 6.1 6 3.7 7.5 M 18.5 12 38 20 M 12.5 12 8 8 5 36 M5 12 2.5. 5.5 8 7.5 M5 22 5 13.5 38 25 M5 13 12 8 5 8 6 0 M5 15.6 2.5. 5 5. 8 7.5 M5 26 5.5 13.5 39.5 32 M5 1,5 1 15 5 11 8 50 G1/8 19.8 2.5 5. 8 5.1 10.5 7.5 M6 32 7.5 1.5 0 M5 1,5 1 15 5 10 8 60 G1/8 23.3 2.5 5. 8 9.6 10.5 7.5 M6 2 7 1.5 5 50 M6 1,5 18 15 6 11 10 68 G1/8 29.7 2.5 1.7 8 8.5 12 6 7.5 M8 50 7.5 15.5 5.5 Compact Cylinder Double Acting Anti-torsion, Cushioned, Magnetic Section Ø mm Stroke mm 0822391600 20 5 81.7 0822391601 20 10 82.70 0822391602 20 15 83.73 0822391603 20 20 8.75 082239160 20 25 85.61 0822391605 20 30 86.67 0822391606 20 0 88.5 0822391607 20 50 90.53 0822392600 25 5 95.7 0822392601 25 10 96.98 0822392602 25 15 98.0 0822392603 25 20 100.00 082239260 25 25 101.5 0822392605 25 30 102.98 0822392606 25 0 105.98 0822392607 25 50 108.96 0822393600 32 5 106.88 0822393601 32 10 109.25 0822393602 32 15 111.52 0822393603 32 20 113.88 082239360 32 25 116.15 0822393605 32 30 118.52 0822393606 32 0 123.1 0822393607 32 50 127.72 0822393609 32 80 11.57 0822393610 32 100 150.82 082239601 0 10 133.2 082239602 0 15 135.81 082239603 0 20 138.1 Ø mm Stroke mm 08223960 0 25 11.09 082239605 0 30 13.72 082239606 0 0 19.07 082239607 0 50 15.3 082239609 0 80 170.17 082239610 0 100 180.73 0822395602 50 15 172.17 0822395603 50 20 175. 082239560 50 25 178.62 0822395605 50 30 181.78 0822395606 50 0 188.13 0822395607 50 50 19.5 0822395609 50 80 213.55 0822395610 50 100 226.23 21

Pilot Valves Type: spool valve Working pressure: -0.9 to 10 bar (-13 to 15 psi) Nominal flow rate Qn at 6 bar (87 psi): 800 NI/min (0.8 Cv) p = 1 bar (15 psi) Ambient temperature range: 0ºC to +50ºC Medium: compressed air, lubricated or non-lubricated Body cover: PA 66 (polyamide 6.6) Seals: PU, NBR (polyurethane/nitrile butadiene rubber) Flange: ZnAI (zinc aluminium) Pc: control pressure (bar) Pw: working pressure (bar) Model No. Weight kg (Ibs) Min. Pressure Min. Control Pressure 0820260002 3 bar 3 bar 0.097 (0.21) 0820260003 Vacuum 2 bar 0820261001 0820261002 0820261003 0.103 Vacuum 3 bar TC08 Series Pilot Operated Valves 5/2 Pilot/Spring TC08 Series Pilot Operated Valves 5/3 Pilot/Pilot, Supply Sealed Mid Position, COE 0820260002 G1/8 69.5 TC08 Series Pilot Operated Valves 5/2 Pilot/Pilot 0820261002 G1/8 87.26 TC08 Series Pilot Operated Valves 5/3 Pilot/Pilot, Centre Open Pressurised Mid Position, COP 0820260003 G1/8 69.5 0820261003 G1/8 87.26 TC08 Series Pilot Operated Valves 5/3 Pilot/Pilot, Fully Sealed Mid Position, APB 0820261001 G1/8 87.26 Section 215

Pilot Valves Type: spool valve Working pressure: -0.9 to 10 bar (-13 to 15 psi) Nominal flow rate Qn at 6 bar (87 psi): 1500 NI/min (1.5 Cv) Ambient temperature range: 0ºC to +50ºC Medium: compressed air, lubricated or non-lubricated Body cover: PA 66 (polyamide 6.6) Seals: HNBR, NBR (nitrile butadiene rubber) Flange: ZnAI (zinc aluminium) Pc: control pressure (bar) Pw: working pressure (bar) Model No. Weight kg (Ibs) Min. Pressure Min. Control Pressure 0820260002 3 bar 3 bar 0.097 (0.21) 0820260003 Vacuum 2 bar 0820261001 0820261002 0820261003 0.103 Vacuum 3 bar TC15 Series Pilot Operated Valves 5/2 Pilot/Spring TC15 Series Pilot Operated Valves 5/3 Pilot/Pilot, Supply Sealed Mid Position, COE 0820258002 G1/ 83.0 TC15 Series Pilot Operated Valves 5/2 Pilot/Pilot 0820259002 G1/ 111.68 TC15 Series Pilot Operated Valves 5/3 Pilot/Pilot, Centre Open Pressurised Mid Position, COP 0820258003 G1/ 83.0 0820259003 G1/ 111.68 Section TC15 Series Pilot Operated Valves 5/3 Pilot/Pilot, Fully Sealed Mid Position, APB 0820259001 G1/ 111.68 216

Solenoid Valves Type: spool valve, zero overlap Ambient temperature range: -10ºC to +50ºC Medium temperature range: -10ºC to +50ºC Medium: compressed air Maximum particle size: 5µm Oil content of compressed air: 0mg/mg 3 to 5mg/m 3 Connector standard: ISO 15217 Form C Operational voltage: 2V DC Power consumption 2 V DC (W): 2 Housing: polyamide, fibre-glass reinforced Seals: acrylonitrile butadiene rubber, polyurethane Front plate: polyamide, fibre-glass reinforced TC08 Series Solenoid Operated Valves 5/2 Solenoid/Spring TC08 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Supply Sealed Mid Position, COE Flow Rate Value Qn (I/min) Threaded Ports Flow Rate Value Qn (I/min) Threaded Ports 0820060126 800 G1/8 81.27 0820061111 800 G1/8 137.11 TC08 Series Solenoid Operated Valves 5/2 Solenoid/Solenoid Flow Rate Value Qn (I/min) Threaded Ports 0820060601 800 G1/8 111.16 TC08 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Centre Open Pressurised Mid Position, COP Flow Rate Value Qn (I/min) Threaded Ports 0820061121 800 G1/8 137.11 TC08 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Fully Sealed Mid Position, APB Flow Rate Value Qn (I/min) Threaded Ports 0820061101 800 G1/8 137.11 Section 217

Solenoid Valves Type: spool valve, zero overlap Ambient temperature range: -10ºC to +50ºC Medium temperature range: -10ºC to +50ºC Medium: compressed air Maximum particle size: 5µm Oil content of compressed air: 0mg/mg 3 to 5mg/m 3 Connector standard: ISO 15217 Operational voltage: 2V DC Power consumption 2 V DC (W): 2 Housing: polyamide, fibre-glass reinforced Seals: acrylonitrile butadiene rubber, hydrogenated nitrile butadiene rubber Front plate: polyamide, fibre-glass reinforced TC08 Series Solenoid Operated Valves 5/2 Solenoid/Spring TC08 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Supply Sealed Mid Position, COE Flow Rate Value Qn (I/min) Threaded Ports Flow Rate Value Qn (I/min) Threaded Ports 0820058126 1500 G1/ 87.51 0820059111 1500 G1/ 13.21 TC08 Series Solenoid Operated Valves 5/2 Solenoid/Solenoid Flow Rate Value Qn (I/min) Threaded Ports 0820058601 1500 G1/ 117.27 TC08 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Centre Open Pressurised Mid Position, COP Flow Rate Value Qn (I/min) Threaded Ports 0820059121 1500 G1/ 13.21 TC08 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Fully Sealed Mid Position, APB Section Flow Rate Value Qn (I/min) Threaded Ports 0820059101 1500 G1/ 13.21 218

Solenoid Valves Type: spool valve Medium: compressed air, lubricated or non-lubricated Minimum permissible pressure: 3-10 bar (-15 psi) Power consumption: 2V DC = 2.1W Inrush power: 220/230V AC, 50/60Hz = 6.6/5.5V A Holding power: 220/230V AC, 50/60Hz =.18/3.3V A Insulation class: F to VDE 0580 Protection with el. connector: IP 65 to DIN VDE 070 Duty cycle: ED = 100% Body: Zn-diecasting Seals: NBR (nitrile butadiene rubber) Operating Voltages, DC ±10% 50 Hz: AC -20% +10% 60 Hz: AC -10% +20% Model No. Nominal flow rate Qn at 6 bar (87 psi) p + 1 bar (15 psi) Ambient Temperature Range Weight Kg (lb) 577207 100 I/min (1. Cv) 0.5 (1.190) 577607-25ºC to +50ºC 0.57 (1.257) 1200 I/min (1.2 Cv) 577627 0.75 (1.653) 577777 900 I/min (0.9 Cv) 0ºC to +50ºC 0.72 (1.587) For Socket Connector Form A (DIN 3650), see Section 9. CD7 Series Solenoid Operated Valves 3/2 Solenoid/Spring, Fully Sealed Mid Position, APB CD7 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Fully Sealed Mid Position, APB 5772075302 G1/ 100.27 5777775302 G1/ 16.55 CD7 Series Solenoid Operated Valves 5/2 Solenoid/Spring, Fully Sealed Mid Position, APB CD7 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Supply Sealed Mid Position, COE 5776075302 G1/ 10.55 5777765302 G1/ 16.55 CD7 Series Solenoid Operated Valves 5/2 Solenoid/Solenoid, Fully Sealed Mid Position, APB CD7 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Centre Open Pressurised Mid Position, COP Solenoid Coils To Suit CD7 Series Valves Description 520507022 2V DC, Form A 28.65 52857022 2V AC, Form A 30.10 52857072 110V AC, Form A 28.65 Section 5776275302 G1/ 129.89 5777755302 G1/ 189.5 52857082 230V AC, Form A 28.65 219

Solenoid Valves Medium: compressed air, lubricated or non-lubricated Minimum permissible pressure: 2-10 bar (29-15 psi) Power consumption: 2V DC = 2.10W Inrush power: 220/230V AC, 50/60Hz = 6.6/5.5V A (at 220V) Holding power: 220/230V AC, 50/60Hz =.18/3.3V A (at 220V) Ambient temperature range: -15ºC to +50ºC Insulation class: F to VDE 0580 Protection with el. connector: IP 65 to DIN VDE 070 Duty cycle: ED = 100% Operating Voltages, DC ±10% 50 Hz: 220V AC -20% +10% 60 Hz: 220V AC -10% +20% For Socket Connector Form A (DIN 3650), see Section 9. Model No. Nominal flow rate Qn at 6 bar (87 psi) p = 1 bar (15 psi) Ambient Temperature Range Weight Kg (lb) 57255 Body: AI, Seals: NBR 0.85 (1.87) 572570 100 I/min (.1 Cv) -25ºC to +50ºC 1.0 (2.205) Body: AI, PAmAD6-GF 50 572555 1.2 (2.66) Seals: NBR (nitrile butadiene rubber) 572565 3800 I/min (3.8 Cv) 0ºC to +50ºC 1.3 (2.866) CD12 Series Solenoid Operated Valves 3/2 Solenoid/Spring, Fully Sealed Mid Position, APB 572555202 G1/2 171.96 CD12 Series Solenoid Operated Valves 5/2 Solenoid/Spring, Fully Sealed Mid Position, APB 572575202 G1/2 22.3 CD12 Series Solenoid Operated Valves 5/2 Solenoid/Solenoid, Fully Sealed Mid Position, APB 5725555202 G1/2 267.19 Solenoid Coils To Suit CD12 Series Valves Section CD12 Series Solenoid Operated Valves 5/3 Solenoid/Solenoid, Fully Sealed Mid Position, APB 5725655202 G1/2 36.82 Description 520890020 2V DC, Form A 5.05 528110020 2V AC, Form A 71.70 528110070 110V AC, Form A 8.59 528110080 230V AC, Form A 5.05 220

Solenoid Valves Working pressure range: 1.5-10 bar (22-15 psi) Nominal flow rate Qn at 6 bar (87 psi) p + 1 bar (15 psi): 950 I/min (0.7 Cv) for plastic tube 8 x 1, 10 x 1 Ø Ambient temperature range: -15ºC to +50ºC Medium: compressed air, lubricated or non-lubricated Weight: 0.31kg (0.683 lbs) Body: POM Seals: NBR For Socket Connector Form A (DIN 3650), see Section 9. Working pressure range: 1.5-10 bar (22-15 psi) Nominal flow rate Qn at 6 bar (87 psi) p + 1 bar (15 psi): 200 I/min (0.2 Cv) Medium: compressed air, lubricated or non-lubricated Weight: 0.073 kg (0.161 lbs) Ambient Temperature Range: -15ºC to +50ºC (at max. 8 bar) (at max. 15 psi) -15ºC to +0ºC (at max. 10 bar) (at max. 15 psi) Body: POM Seals: NBR/PU For Socket Connector Form A (DIN 3650), see Section 9. Series 70 Solenoid Valves 5/2 Solenoid/Spring Tube Size mm 572705302 8 x 1 103.83 572755302 10 x 1 103.83 Series 80, 6 x 1mm Diameter Solenoid Valves 5/2 Solenoid/Spring Voltage & Frequency 57280020 2V DC 78.82 57280520 2V AC 83.99 Series 70 Solenoid Valves 5/2 Solenoid/Solenoid Tube Size mm 572715302 8 x 1 138.77 572765302 10 x 1 138.77 57280570 110V AC 83.99 57280580 220/230V AC 78.82 Series 80, 6 x 1mm Diameter Solenoid Valves 5/2 Solenoid/Solenoid Voltage & Frequency 57281020 2V DC 113.88 Solenoid Coils To Suit 70 Series Valves Description 520507022 2V DC, Form A 28.65 52857022 2V AC, Form A 30.10 52857072 110V AC, Form A 28.65 57281520 2V AC 116.65 57281570 110V AC 122.89 57281580 220/230V AC 113.88 Section 52857082 230V AC, Form A 28.65 221

Modular FRL Series Ambient temperature: -10ºC to +50ºC (with dried air) Medium: compressed air Installation position: vertical Filter porosity: 5µm Body: PA MXD 6 Thread bushing = die-cast zinc Reservoir: polycarbonate with bayonet catch Protective guard: PA Cover: ABS Drain Type with Options 1) PC container with PA protective guard semi-automatic, without pressure: open 2) PC container with PA protective guard fully automatic, without pressure: open A B C D F H AS1 G1/8 3 5 131.7 52 167.5 G1/8 52 59 163.5 65 180.5 G1/8 63 7 189.5 80 206 AS5 G1/8 85 103 250 109 266 Standard Filter 5 Micron Threaded Ports Drain Type Nominal Flow Qn (I/min) Inlet Pressure (bar) Weight kg AS1 R1201600 G1/ 1 1000 1.5-12 0.166 19.72 R1201602 G1/ 2 1000 1.5-12 0.18 67.1 R12006000 G1/ 1 2100 1.5-16 0.212 32.67 R12006001 G1/ 2 2100 1.5-16 0.255 71.56 R12006009 G3/8 1 2100 1.5-16 0.212 32.67 R12006010 G3/8 2 2100 1.5-16 0.255 71.56 R12007000 G3/8 1 3500 1.5-16 0.361 5.2 R12007001 G3/8 2 3500 1.5-16 0.10 76.97 R12007009 G1/2 1 3500 1.5-16 0.361 5.2 R12007010 G1/2 2 3500 1.5-16 0.10 76.97 R12009000 G3/ 1 7800 1.5-16 0.718 17.10 AS5 R12009001 G3/ 2 7800 1.5-16 0.769 178. R12009009 G1 1 7800 1.5-16 0.769 17.10 R12009010 G1 2 7800 1.5-16 0.769 178. Section 222

Modular FRL Series Temperature range: -10ºC to +50ºC Inlet pressure: 1.5-16 bar Medium: compressed air Installation position: vertical Filter porosity: 0.3µm Reservoir capacity: 12cm 3 (with semi-automatic) Body: PA MXD 6 Thread bushing: die-cast zinc Reservoir: polycarbonate with bayonet catch Protective guard: PA Cover: ABS Drain Type with Options 1) PC container with PA protective guard semi-automatic, without pressure: open 2) PC container with PA protective guard fully automatic, without pressure: open Pre-filter 0.3 Micron Micro-filter 0.01 Micron Threaded Ports Drain Type Nominal Flow Qn (I/min) Weight kg Threaded Ports Drain Type Nominal Flow Qn (I/min) Weight kg R12006018 G1/ 1 00 0.220 86.50 R12006036 G1/ 1 350 0.220 93.52 R12006019 G1/ 2 00 0.263 125.27 R12006027 G3/8 1 00 0.263 86.50 R12006037 G1/ 2 350 0.263 132.28 R1200605 G3/8 1 350 0.220 93.52 R12006028 G3/8 2 00 0.263 125.27 R1200606 G3/8 2 350 0.263 132.28 R12007018 G3/8 1 900 0.361 105.83 R12007036 G3/8 1 700 0.361 108.59 R12007019 G3/8 2 900 0.10 137.56 R12007027 G1/2 1 900 0.361 105.83 R12007037 G3/8 2 700 0.10 10.20 R1200705 G1/2 1 700 0.361 108.59 R12007028 G1/2 2 900 0.10 137.56 R1200706 G1/2 2 700 0.10 10.20 Ambient temperature: -10ºC to +50ºC (with dried air) Inlet pressure: 1.5-16 bar Medium: compressed air Installation position: vertical Reservoir capacity: 12cm 3 Body: PA MXD 6 Thread bushing: die-cast zinc Reservoir: polycarbonate with bayonet catch Protective guard: PA Cover: ABS Active Carbon Filter for Oil Removal 0.005 Micron Threaded Ports Nominal Flow Qn (I/min) Weight kg R12006072 G1/ 650 0.220 102.77 R12006075 G3/8 650 0.220 102.77 R12007072 G3/8 1000 0.375 118.00 R12007075 G1/2 1000 0.375 118.00 Section 223

Modular FRL Series Section Maximum supply pressure: 16 bar (232 psi) Temperature range: -10ºC to +50ºC Medium: compressed air Installation position: any Body: PA MXD 6 Thread bushing: die-cast zinc A B C D E F AS1 G1/ 3 63.5 52 0.80 G1/ 52 59 66.8 53.2 65 G3/8 52 59 66.8 53.2 65 G3/8 63 7 82 63.5 80 G1/2 63 7 82 63.5 80 AS5 G3/ 85 103 112 75 109 G1 85 103 112 75 109 Pressure Regulator Relieving AS1 AS5 Threaded Ports AS1 Nominal Flow Qn (I/min) Unit Supplied with Gauge Adjustment Range bar Weight kg R1201627 G1/ 1000 0.2-0.209 30.77 R1201628 G1/ 1000 0.5-8 0.209 30.77 R1201629 G1/ 1000 0.5-10 0.209 30.77 R12006101 G1/ 2200 0.1-1 0.320 5.58 R12006103 G1/ 2200 0.1-2 0.320 5.58 R12006105 G1/ 2200 0.2-0.320 5.58 R12006107 G1/ 2200 0.5-8 0.320 5.58 R12006109 G1/ 2200 0.5-10 0.320 5.58 R12006111 G1/ 2200 0.5-16 0.320 5.58 R12006113 G3/8 2700 0.1-1 0.320 5.58 R12006115 G3/8 2700 0.1-2 0.320 5.58 R12006117 G3/8 2700 0.2-0.320 5.58 R12006119 G3/8 2700 0.5-8 0.320 5.58 R12006121 G3/8 2700 0.5-10 0.320 5.58 R12006123 G3/8 2700 0.5-16 0.320 5.58 R12007101 G3/8 1600 0.1-1 0.600 62.56 R12007103 G3/8 600 0.2-2 0.600 62.56 R12007105 G3/8 5000 0.2-0.600 62.56 R12007107 G3/8 300 0.5-8 0.600 62.56 R12007109 G3/8 300 0.5-10 0.600 62.56 R12007111 G3/8 3500 0.5-6 0.600 62.56 R12007113 G1/2 1600 0.1-1 0.600 62.56 R12007115 G1/2 600 0.1-2 0.600 62.56 R12007117 G1/2 5000 0.2-0.600 62.56 R12007119 G1/2 5200 0.5-8 0.600 62.56 R12007121 G1/2 5200 0.5-10 0.600 62.56 R12007123 G1/2 000 0.5-16 0.600 62.56 R12009101 G3/ 1500 0.1-1 0.997 1.18 R12009103 G3/ 1500 0.1-2 0.997 1.18 R12009105 G3/ 1500 0.2-0.997 1.18 R12009107 G3/ 1500 0.5-8 0.997 1.18 R12009109 G3/ 1500 0.5-10 0.997 1.18 R12009111 G3/ 1500 0.5-16 0.997 1.18 R12009113 G1 1500 0.1-1 0.997 1.18 R12009115 G1 1500 0.1-2 0.997 1.18 R12009117 G1 1500 0.2-0.997 1.18 R12009119 G1 1500 0.5-8 0.997 1.18 R12009121 G1 1500 0.5-10 0.997 1.18 R12009123 G1 1500 0.5-16 0.997 1.18 22

Modular FRL Series Maximum supply pressure: 16 bar (232 psi) Temperature range: -10ºC to +50ºC Medium: compressed air Installation position: any Body: PA MXD 6 Thread bushing: die-cast zinc A B C D E F G1/ 52 59 66.8 53.2 65 G3/8 52 59 66.8 53.2 65 G3/8 63 7 82 63.5 80 G1/2 63 7 82 63.5 80 Precision Pressure Regulator Relieving Threaded Ports Nominal Flow Qn (I/min) Adjustment Range bar Weight kg R12006137 G1/ 2200 0.1-1 0.320 7.6 R12006139 G1/ 2200 0.1-2 0.320 7.6 R1200611 G1/ 2200 0.2-0.320 7.6 R1200613 G1/ 2200 0.5-8 0.320 7.6 R1200615 G1/ 2200 0.5-10 0.320 7.6 R1200619 G3/8 2700 0.1-1 0.320 7.6 R12006151 G3/8 2700 0.1-2 0.320 7.6 R12006153 G3/8 2700 0.2-0.320 7.6 R12006155 G3/8 2700 0.5-8 0.320 7.6 R12006157 G3/8 2700 0.5-10 0.320 7.6 R12007137 G3/8 1600 0.1-1 0.600 98.5 R12007139 G3/8 600 0.1-2 0.600 98.5 R1200711 G3/8 5000 0.2-0.600 98.5 R1200713 G3/8 300 0.5-8 0.600 98.5 R1200715 G3/8 300 0.5-10 0.600 98.5 R1200719 G1/2 1600 0.1-1 0.600 98.5 R12007151 G1/2 600 0.1-2 0.600 98.5 R12007153 G1/2 5000 0.2-0.600 98.5 R12007155 G1/2 5200 0.5-8 0.600 98.5 R12007157 G1/2 5200 0.5-10 0.600 98.5 Section 225

Modular FRL Series Temperature range: -10ºC to +50ºC Installation position: vertical Reservoir capacity: 0cm 3 Body: PA MXD 6 Thread bushing: die-cast zinc Reservoir: polycarbonate with bayonet catch Protective guard: PA Seal: ABS A B C D E H AS1 G1/ 3 5 52 31 12.7 G1/ 52 59 65 28.2 157 G3/8 52 59 65 28.2 157 G3/8 63 7 80 26 183 G1/2 63 7 80 26 183 AS5 G3/ 85 103 109 29 239 G1 85 103 109 29 239 Standard Lubricator Oil Mist Threaded Ports Nominal Flow Qn (I/min) Inlet Pressure bar Weight kg AS1 R120162 G1/ 100 0.8-12 0.187 26.07 AS5 R12006225 G1/ 2800 0.5-16 0.229 37.37 R12006231 G3/8 3100 0.5-16 0.229 37.37 R12007225 G3/8 8000 0.5-16 0.33 52.0 R12007231 G1/2 8000 0.5-16 0.33 52.0 R12009225 G3/ 15800 0.5-16 0.760 19.19 R12009231 G1 15800 0.5-16 0.760 19.19 Section 226

Modular FRL Series Ambient temperature: -10ºC to +50ºC (with dried air) Max supply pressure: 16 bar Medium: compressed air Installation position: vertical Reservoir capacity: 28cm 3 Filter porosity: 5µm Body: PA MXD 6 Thread bushing: die-cast zinc Reservoir: polycarbonate with bayonet catch Protective guard: PA Cover: ABS Drain Type with Options 1) PC container with PA protective guard semi-automatic, without pressure: open 2) PC container with PA protective guard fully automatic, without pressure: open A2 A B C D E F H AS1 G1/8 3 63.5 131.7 35.8 52 167.5 G1/ G1/8 52 59 163.5 53.2 65 180.5 G1/ G1/8 63 7 189.5 63.5 80 206 AS5 G1/ G1/8 63 103 250 75 109 266 Filter Regulator Relieving Threaded Ports Drain Type Nominal Flow Qn (I/min) Adjustment Range bar Weight kg R120165 G1/ 1 1000 0.5-8 0.21.89 AS1 R120166 G1/ 2 1000 0.5-8 0.259 83.1 R1201655 G1/ 1 1000 0.5-10 0.21.89 R1201656 G1/ 2 1000 0.5-10 0.259 83.1 R12006200 G1/ 1 2100 0.5-8 0.39 67.73 R12006201 G1/ 2 2100 0.5-8 0.37 106.8 R12006209 G3/8 1 2600 0.5-8 0.37 67.73 R12006210 G3/8 2 2600 0.5-8 0.37 106.8 R12007200 G3/8 1 5100 0.5-8 0.658 83.60 R12007201 G3/8 2 5100 0.5-8 0.707 115.3 R12007209 G1/2 1 5100 0.5-8 0.658 83.60 AS1 Unit Supplied With Gauge R12007210 G1/2 2 5100 0.5-8 0.707 115.3 R12009200 G3/ 1 1000 0.5-8 1.082 208.87 AS5 R12009201 G3/ 2 1000 0.5-8 1.133 20.20 R12009209 G1 1 1000 0.5-8 1.082 208.87 R12009210 G1 2 1000 0.5-8 1.133 20.20 Section 227

Modular FRL Series Max supply pressure: 16 bar Temperature range: -10ºC to +50ºC (with dried air) Medium: compressed air Installation position: vertical Filter porosity: 5µm Body = PA MXD 6 Thread bushing: die-cast zinc Reservoir: polycarbonate with bayonet catch Protective guard: PA Cover: ABS Drain Type with Options 1) PC container with PA protective guard semi-automatic, without pressure: open 2) PC container with PA protective guard fully automatic, without pressure: open A2 A B C D E F H J K O R T AS1 G1/8 129 63.5 131.7 35.8 52 159.5 G1/ G1/8 156 59 163.5 53.2 65 180.5 95 9. 52 5. 7.3 G1/ G1/8 189 7 189.5 63.5 80 206 10 71 63 6 8 AS G1/ G1/8 255 103 250 75 109 266 10 86.5 85 8.5 10 Filter, Regulator & Lubricator Relieving Threaded Ports Drain Type Nominal Flow Qn (I/min) Adjustment Range bar Weight kg AS1 R1201675 G1/ 1 80 0.5-8 0.628 8.06 R1201676 G1/ 2 80 0.5-8 0.66 121.8 R12006318 G1/ 1 100 0.5-8 0.780 122.3 AS1 AS5 R12006319 G1/ 2 100 0.5-8 0.825 160.98 R12006327 G3/8 1 1600 0.5-8 0.780 122.3 R12006328 G3/8 2 1600 0.5-8 0.825 160.98 R12007318 G3/8 1 3500 0.5-8 1.353 178.03 R12007319 G3/8 2 3500 0.5-8 1.02 209.6 R12007327 G1/2 1 3500 0.5-8 1.353 178.03 R12007328 G1/2 2 3500 0.5-8 1.02 209.6 R12009318 G3/ 1 12300 0.5-8 2.627 8.0 R12009319 G3/ 2 12300 0.5-8 2.678 79.75 R12009327 G1 1 12300 0.5-8 2.627 8.0 Unit Supplied With Gauge R12009328 G1 2 12300 0.5-8 2.678 79.75 Section 228

Modular FRL Series Max supply pressure: 16 bar Temperature range: -10ºC to +50ºC (with dried air) Medium: compressed air Installation position: vertical Filter porosity: 5µm Reservoir capacity Filter: 28 cm 3 (0.95 US fl oz) Lubricator: 0cm 3 (1.69 US fl oz) Body: PA MXD 6 Thread bushing: die-cast zinc Reservoir: polycarbonate with bayonet catch Protective guard: PA Cover: ABS A2 A B C D E F H J K R T AS1 G1/8 86 163.5 131.7 35.3 52 159.5 G1/ G1/8 10 59 163.5 53.2 65 180.5 95 9. 5. 7.3 G1/ G1/8 126 7 189.5 63.5 80 206 10 71 6. 8 AS G1/ G1/8 170 103 250 75 109 266 10 86.5 8.5 10 Drain Type with Options 1) PC container with PA protective guard semi-automatic, without pressure: open 2) PC container with PA protective guard fully automatic, without pressure: open Filter Regulator & Lubricator Relieving Threaded Ports Drain Type Nominal Flow Qn (I/min) Adjustment Range bar Weight kg AS1 R1201672 G1/ 1 700 0.5-8 0.50 7.79 R1201673 G1/ 2 700 0.5-8 0.522 112.30 R12006298 G1/ 1 1800 0.5-8 0.633 106.87 R12006299 G1/ 2 1800 0.5-8 0.676 15.63 R12006307 G3/8 1 2000 0.5-8 0.633 106.87 R12006308 G3/8 2 2000 0.5-8 0.676 15.63 R12007298 G3/8 1 3500 0.5-8 1.018 1.57 R12007299 G3/8 2 3500 0.5-8 1.067 176.19 R12007307 G1/2 1 3500 0.5-8 1.018 1.57 AS1 Unit Supplied With Gauge R12007308 G1/2 2 3500 0.5-8 1.067 176.19 R12009298 G3/ 1 12300 0.5-8 1.827 362.03 AS5 R12009299 G3/ 2 12300 0.5-8 1.878 393.39 R12009307 G1 1 12300 0.5-8 1.827 362.03 R12009308 G1 2 12300 0.5-8 1.878 393.39 Section 229

Modular FRL Series Working pressure: 0 to 10 bar Ambient temperature: -10ºC to +50ºC Medium: compressed air Pickup power with AC 50 Hz: 2.2V A Holding power with AC 50 Hz: 1.6V A Power consumption with DC: 2W Relative switch-on duration: 100% Protection class (DIN 0 050) with electrical connector: IP 65 Installation position: any Body: PA MXD 6 Thread bushing: die-cast zinc Cover: ABS 3/2 Solenoid Valve BSP Threaded Ports Nominal Flow Qn (I/min) Voltage Weight kg AS1 R1201666 G1/ 2000 2V DC 0.215 93.19 R1201668 G1/ 2000 230V AC 0.21 10.8 R12006265 G1/ 1800 2V DC 0.219 106.8 R12006266 G1/ 1800 110V AC 0.219 106.8 R12006267 G1/ 1800 230V AC 0.219 106.8 R12006269 G3/8 2000 2V DC 0.219 106.8 R12006270 G3/8 2000 110V AC 0.219 106.8 R12006271 G3/8 2000 230V AC 0.219 106.8 R12007265 G3/8 500 2V DC 0.59 115.87 R12007266 G3/8 500 110V AC 50 0.59 126.85 R12007267 G3/8 500 230V AC 50 0.59 126.85 R12007269 G1/2 500 2V DC 0.59 115.87 R12007270 G1/2 500 110V AC 50 0.59 126.85 R12007271 G1/2 500 230V DC 50 0.59 126.85 Section 230

Modular FRL Series Ambient temperature: -10ºC to +50ºC Medium: compressed air Installation position: any Body: PA MXD 6 Thread bushing: die-cast zinc Cover: ABS Medium: compressed air Installation position: any Body: PA MXD 6 Thread bushing: die-cast zinc Cover: ABS 3/2 Way Shut-off Valve BSP Distributor Block BSP Threaded Ports Nominal Flow Qn (I/min) Weight kg Threaded Ports Weight kg AS1 R120166 G1/ 2600 0.15 26.33 AS1 R1201662 G1/ 0.18 18.19 R12006260 G1/ 3000 0.206 31.8 R12006261 G3/8 3000 0.206 31.8 R12006250 G1/ 0.250 23.5 R12006251 G3/8 0.250 23.5 R12006260 G3/8 500 0.6 31.8 R12006261 G1/2 500 0.6 31.8 R12007250 G3/8 0.250 26.57 R12007251 G1/2 0.250 26.57 AS R12009260 G3/ 1500 0.825 11.65 R12009261 G1 1500 0.825 11.65 AS R12009250 G3/ 0.68 97.21 R12009251 G1 0.68 97.21 Section 231

Modular FRL Series Automatic Drain To Suit & Models Description 1827009352 Fully Automatic 71.69 Technical Specifications Type: bourdon tube pressure gauge Housing: plastic Maximum ambient temperature: +50ºC bar Maximum temperature of medium: +50ºC bar Scales bar: green psi: white Background: black Pointer: white Mounting Clip Wall Description AS1 R1201757 For All Units 3.72 R12006370 For All Units 5.69 R12007370 For All Units 7.07 AS5 R12009370 For All Units 8.27 Pressure Gauge, Back Entry BSP, ABS Case Ø mm Connection Thread Scale Range bar 182723108 0 G1/8 0-2.5 12.63 1827231018 0 G1/8 0-6 12.63 182723102 0 G1/8 0-10 12.63 1827231009 0 G1/8 0-16 12.63 1827231059 0 G1/ 0-6 12.63 Mounting Plate Wall 1827231060 0 G1/ 0-10 12.63 182723107 0 G1/ 0-16 12.63 1827231023 50 G1/ 0-1.6 12.63 Description AS1 R1201755 For All Units 5.21 R12006368 For All Units 6.16 R12007368 For All Units 8.38 AS5 R12009368 For All Units 1.88 1827231012 50 G1/ 0-2.5 12.63 1827231016 50 G1/ 0-6 12.63 1827231015 50 G1/ 0-10 12.63 1827231010 50 G1/ 0-16 12.63 1827231011 63 G1/ 0-16 12.63 Block Assembly Clip Modular Description AS1 R1201758 For All Units 2.12 Section R12006371 For All Units 3.10 R12007371 For All Units.3 AS5 R12009371 For All Units 6.27 232