Workholding for... High-volume machining

Workholding for... High-volume machining

The Name To Know In Workholding Since 1916, LMC has been the name to know in workholding and it keeps getting better. Growing. Re-investing in engineering capabilities. Listening, learning. Creating international partnerships. And seeking out the best in workholding worldwide and bring you the right solutions to your workholding problems especially within high volume applications within automotive and other markets. It all starts with your part and/or print. Your custom-engineered workholding solution is analyzed by LMC from all angles. Our global experience and support is seamlessly combined with local application engineering/installation/training/service/support. In addition, we maintain strong relationships with all machine tool builders, leading to stronger teamwork in developing your solution. We re reknown for our quality product (including ISO9000 certification) and responsive service. Take a look at a few of our products geared for high volume turning applications but it s more than just these products. We remain focused on your increased productivity, improved part/process quality, and delivering industry-leading chipcutting know how. Find out how LMC can tackle the toughest of your workholding requirements give us a call today. Global Partnerships In 1989, Logansport Machine Company joined forces with Japan s Matsumoto Machine Company (Kanazawa, Japan), a world-class partner and international leader in power chucks, rotary tables and other workholding devices. In 1992, LMC associated with Neidlein Spannzeuge Gmbh (Stuttgart, Germany) to provide face drivers and live and dead centers worldwide. Most recently, LMC has partnered with Atlings Maskinfabrik AB (Ockelbo, Sweden), a leader in steady rests.

Chuck Selector Guide Standard Chuck For More Secure Gripping PB Pin Arbor Chucks PB type chucks pull the jaws back to more securely clamp the work. Pulling action of jaw clamps provide secure, yet not excessive workholding force Dust seal for maintenance free operation 5, 6 8 and 10 sizes available For More Turning Speed and More Secure Clamping Accuracy PBH Pin Arbor Chucks Similar to the PB in pull down clamping action, PBH type chucks also provide O.D. slide guides to enhance increased turning speed, accuracy. Pulling action of jaw clamps provide secure, yet not excessive workholding force O.D. slide guide delivers more accurate clamping high speed turning capabilities 5, 6 8, 10, 12, and 15 sizes available For Angled Work Parts Requiring Accurate Clamping and More Gripping Force PG & PS Power Swing Chucks Jaws swing to clamp work, suited for nearly round forged or cast parts. Pulls the work piece when clamped Securely clamps work with draft angle by swing clamp action (best sealing, ensures accuracy, steadiness over long machining periods) 6, 8, 10, 12, 15 and 21 sizes available (For ID gripping of ring shaped parts, choose our PBN Pin Arbor Chucks.) Secure Clamp Specifications Coolant and fixture plate dimensions on center of chuck Std. X. Coolant Hole Pitch Y. Fixture Hole Pitch Dimension 5 6 8 10 12 15 18 21 5 6 8 10 12 15 18 21 PB (mm) 10 10 10 10 - - - - 28 28 28 28 - - - - PBH (mm) 10 10 - - 48 48 - - PG/PS (mm) - 10 10 10 10 15 20 20-28 28 35 35 35 35 35

PS/ PSC & PG/PGC Power Swing Chucks Our PS and PG Chucks are suited for round/nearly round parts (specifically forged or cast parts) that require machining. They use a ball lock, knuckle mechanism that functions as a pull-down and clamping device, improving clamp accuracy and steadiness over long machining periods. Both models are offered standard in 6, 8, 10, 12 15, 18 and 21 sizes. The PS Chuck is typically used for centering work not requiring a thru-hole. The PG Chuck can be supplied with air (for sensors) or coolant through the chuck. PS Chuck PS (& PSC) Dimensions PS-6 PS-8 PS-10 PS-12 PS-15 PS-18 PS-21 Gripping Force, Kgf 6600 8700 10,800 10,800 16,500 16,500 16,500 Max Draw Pull, Kgf 2200 2900 3600 3600 5500 5500 5500 Max Rotation Speed, rpm 3000 2800 2500 2000 1600 1200 900 Jaw Stroke, mm 7.9 9.5 12.7 12.7 15.8 15.8 15.8 Shifter Stroke, mm 11.3 13.3 17.5 17.5 22.3 22.3 22.3 Clamping Dia (i.d.), mm 12.7-120 16-152 50-203 63-241 76-317 89-394 162-470 Clamping Dia (o.d.), mm 70-152 76-203 85-235 127-305 165-381 241-457 317-533 Weight, Kg 18 27 45 67.5 84.5 120 180 GD 2, Kg-m 2 0.15 0.48 1.23 2.42 8.49 15.17 25.00 Applicable Cylinder 2R105 2R120 2R120 2R120 RNKP150 RNKP150 RNKP150 /21-25 /21-25 /21-25 /21-25 /35-01 /35-01 /35-01 A1, mm 4.4 4.0 4.0 4.0 12.7 12.7 12.7 A2, mm 10.6 12 13.5 13.5 24.7 24.7 24.7 A3, mm 15.7 17.3 21.5 21.5 35 35 35 B, mm 26 30 31.4 31.4 34.9 34.9 34.9 D, mm 162 200 254 300 381 457 533 E, mm 85.2 100 118 118 131 131 131 F M16 M16 M18 M18 M24 M30 M30 G, mm 59.2 70 86.6 86.6 96.1 96.1 96.1 L, mm 104.5 123.3 147.1 147.1 163.4 163.4 163.4 L1, mm 73.15 88.95 112.7 133.27 171.45 209.55 247.65 L2, mm 78 92.2 112.7 133 176 213.6 252 M1, mm 17.3 22.1 30 50.6 65.8 103.9 142 M2, mm 22.2 25.3 30.1 50.7 69.8 107.9 146.0 N, mm 24.9 29.4 36.5 36.5 41.9 41.9 41.9 Q, mm 37.5 50 65 65 62.5 90 90 R, mm 67.5 85 105 105 107.5 145 145 T M8 M8 M10 M10 M12 M16 M16 U1, mm 41.5 44.0 57.0 57.0 76.0 105.0 105.0 U2 M6 x 12 M6 x 12 M8 x 15 M8 x 15 M8 x 15 M10 x 15 M10 x 15

PG Chuck PG (& PGC) Dimensions PG-6 PG-8 PG-10 PG-12 PG-15 PG-18 PG-21 Gripping Force, Kgf 6600 8700 10,800 10,800 16,500 16,500 16,500 Max Draw Pull, Kgf 2200 2900 3600 3600 5500 5500 5500 Max Rotation Speed, rpm 3000 2800 2500 2000 1600 1200 900 Jaw Stroke, mm 7.9 9.5 12.7 12.7 15.8 15.8 15.8 Shifter Stroke, mm 11.3 13.3 17.5 17.5 22.3 22.3 22.3 Clamping Dia (i.d.), mm 12.7-120 16-152 50-203 63-241 76-317 89-394 162-470 Clamping Dia (o.d.), mm 70-152 76-203 85-235 127-305 165-381 241-457 317-533 Weight, Kg 18 27 45 67.5 84.5 120 180 GD 2, Kg-m 2 0.15 0.48 1.23 2.42 8.49 15.17 25.00 Applicable Cylinder 2R105 2R120 2R120 2R120 RNKP150 RNKP150 RNKP150 /21-25 /21-25 /21-25 /21-25 /35-01 /35-01 /35-01 A1, mm 4.4 4.0 4.0 4.0 12.7 12.7 12.7 A2, mm 10.6 12 13.5 13.5 24.7 24.7 24.7 A3, mm 15.7 17.3 21.5 21.5 35 35 35 B, mm 26 30 31.4 31.4 34.9 34.9 34.9 D, mm 162 200 254 300 381 457 533 E, mm 85.2 100 118 118 131 131 131 F M22P1.5 M22P1.5 M30P1.5 M30P1.5 M42P1.5 M45P1.5 M45P1.5 G, mm 59.2 70 86.6 86.6 96.1 96.1 96.1 L, mm 104.5 123.3 147.1 147.1 163.4 163.4 163.4 L1, mm 73.15 88.95 112.7 133.27 171.45 209.55 247.65 L2, mm 78 92.2 112.7 133 176 213.6 252 M, mm 17 17 20 20 26.5 33.5 33.5 M1, mm 17.3 22.1 30 50.6 65.8 103.9 142 M2, mm 22.2 25.3 30.1 50.7 69.8 107.9 146.0 N, mm 24.9 29.4 36.5 36.5 41.9 41.9 41.9 Q, mm 37.5 50 65 65 62.5 90 90 R, mm 67.5 85 105 105 107.5 145 145 T M8 M8 M10 M10 M12 M16 M16 PSC & PGC Compensating Power Swing Chucks Our PS and PG chucks are supplied with compensating jaws, the PSC and PGC Models. Because the jaws float independently, it is suited for rough castings that are not perfectly round and are more difficult to clamp with self-centering chucks. The PSC and PGC chucks are designed with chuck jaws that compensate to make sure that grip force equals out on all jaws. Both compensating models are available with air, coolant or both air and coolant through the chuck.

PB Pin Arbor Chucks LMC offers multiple models and sizes of Pin Arbor Chucks. Our PB Chuck is suited to holding round workpieces with flat surfaces (IE: machining brake disc rotors). When flat faced, large diameter parts need to be faced or bored out, often the application calls for the force on the radial surface to be minimized. Because the PB Chuck offers a pull-down feature and radial clamping feature, excessive clamping force and distortion is nearly eliminated. The PB Chuck is offered standard in 5, 6, 8, and 10 sizes. It can be supplied with air, coolant through the chuck, or both air and coolant. PB Dimensions PB-5 PB-6 PB-8 PB-10 Thru-hole, mm 12 25 34 34 Jaw Stroke, mm (dia) 4.2 5.5 6.8 8.5 Pin Stroke, mm 10 13 16 20 Max Clamping Dia, mm 121 148.5 189 229 Min Clamping dia, mm 22 34.4 38 46 Gripping Force, Kgf 2400 3600 5500 6500 Max Draw Pull, Kgf 1100 1650 2120 2600 Max Rotation Speed, rpm 7000 6000 4500 3200 GD 2, Kg-m 2 0.05 0.18 0.46 1.35 Weight, Kg 6 13 24.5 42 Applicable Cylinder 2R105 2R105 2R120 2R120 /21-25 /21-25 /21-25 /21-25 A, mm 130 165 220 254 B P.C.D. 82.6 P.C.D. 104.8 P.C.D. 133.35 P.C.D. 171.4 C, mm 110 140 170 225 D, mm 5 5 7.5 7.5 F M20P1.5 M30P1.5 M39P1.5 M39P1.5 H, mm 70 85 98 120 J 3-M10 6-M10 6-M12 6-M16 L1, mm 27.5 42.5 47.5 47.5 L2, mm 7.5 7.5 8 8 M, mm 12 25 34 34 N, max, mm 44 61.2 72 85 N, min, mm 41.9 58.45 68.6 80.75 P, max, mm 36.5 45 58 70 P, min, mm 26.5 32 42 50 Q, mm 25 40 40 80 R, mm 30 25 45 30 T 6-M6 x 12 6-M8 x 15 6-M10 x 20 6-M12 x 18 U1, mm 26 40 50 50 U2 3-M5 3-M5 3-M5 3-M5 W1, mm 38 52 64 64 W2, mm 16 30 40 40 U3, mm - 80 110 110 U4-3-M8 3-M10 3-M10 V1, mm - 30 30 30 V3, mm - 12 15 15

PBH Pin Arbor Chucks Like our PB Chuck, our PBH Chuck holds round workpieces with flat surfaces. The PBH Chuck additionally features a standoff behind the chuck to support the back side of the jaws. The result it gives the chuck added rigidity and greater support so longer parts will not flex during machining, especially important in higher speed machining. The PBH Chuck is offered standard in 5, 6, 8, and 10 sizes. It can be supplied with air, coolant through the chuck, or both air and coolant. PBH Dimensions PBH-5 PBH-6 PBH-8 PBH-10 PBH-12 PBH-15 Jaw Stroke, mm (dia) 3.4 4.2 4.2 4.2 4.2 4.2 Clamping Dia-standard, mm 65-80 86-100 120-140 150-180 190-230 240-290 Clamping Dia-hard type, mm 15-60 20-80 60-110 100-145 120-200 220-280 Gripping Force, Kgf 5500 9400 11,700 14,000 18,000 18,000 Max Draw Pull, Kgf 1200 2000 2500 3000 4000 4000 Max Rotation Speed, rpm 7000 6000 4500 3200 2500 2000 GD 2, Kg-m 2 0.067 0.2 0.54 1.43 3.5 10.4 Weight, Kg 8 16 27 46 70 130 Applicable Cylinder 2R105 2R105 2R120 2R120 RNKP150 RNKP150 /21-25 /21-25 /21-25 /21-25 /35-01 /35-01 A, mm 130 162 210 250 320 400 B, h6 60 80 80 80 ASA#8 380 C, mm 24 32 40 45 50 60 D, mm 72 90 100 110 130 137 E, mm 103 130 155 165 200 241 F, mm 5 7 7 7 7 G, mm 20 30 30 30 40 40 H, max, mm 18 20 25 25 30 25 H, min, mm 10 10 15 15 20 15 I M20 x P1.5 M25 x P1.5 M25 x P1.5 M28 x P1.5 M32 x P1.5 M42 x P1.5 J 3-M8 3-M12 3-M16 3-M16 6-M16 3-M24 P.C.D.100 P.C.D.130 P.C.D.175 P.C.D.210.C.D.171.4 P.C.D.330.2 M, mm 16 20 20 21 23.5 33.5 U1, mm 28 60 60 66 70 80 U2 3-M5 3-M5 3-M8 3-M8 3-M8 3-M8 V1, mm 25 28 28 28 28 28 V2, mm 5 5 5 5 5 5 V3, mm 10 12 12 12 12 12 W1, mm 16 35 40 40 50 60 W2, mm 16 25 26 26 36 46 W3, mm 5 8 8 8 8 8

PBN Pin Arbor Chucks Our PBN Chuck is our pin arbor model suited to handle ID gripping of ring shaped parts. The PB Chuck is offered standard in 5, 6, 8, and 10 sizes. It can be supplied with air, coolant through the chuck, or both air and coolant. The PBH Chuck is offered standard in 5 and 6 sizes. It can be supplied with air, coolant through the chuck, or both air and coolant. PBN Dimensions PBN-6 PBN-8 Jaw Stroke, mm (dia) 4.2 7.2 Pin Stroke, mm 10 10 Clamping Diameter, mm 27-171 60-189 Gripping Force, Kgf 2700 4500 Max Draw Pull, Kgf 1500 2500 Max Rotation Speed, rpm 3000 4500 GD 2, Kg-m 2 0.29 0.66 Weight, Kg 16 28 Applicable Cylinder 2R105/21-25 2R120/21-25 A, mm 190 210 B, mm P.C.D. 150 P.C.D. 133.4 C, mm 80 190 D, mm 7 5 F M16 P2.0 M20 P2.5 H, mm 74 95 J 3-M16 6-M12 N, max, mm 19.05 46.6 N, min, mm 16.95 43 P, max, mm 51 54 P, min, mm 41 44 Q, mm 130 165 T 3-M6 x 12 6-M10 x 20

2R Cylinder Just one of several different models and sizes of hydraulicallypowered rotating cylinders, our System 2R Hydraulic Rotating Cylinder is well suited to handle a wide range of your high performance chucking applications. They are compact (for increased operation in restricted areas, ideal in vertical applications where spindle-to-floor dimensions are critical) and lightweight to help high speed operation. Stroke detection via proximity switches ensures the chuck s opening/closing. 2R Cylinder Dimensions 2R 105/21-25 2R 120/21-25 2R 120/21-35 RNKP150/35-01 Max Speed (min-1) 6000 5000 5000 4200 Max Pressure (Kgf/cm 2 ) 40 40 40 40 Piston Dia (mm) 105 120 120 150 Piston Stroke (mm) 25 25 35 35 Piston Area-Push (cm 2 ) 78.1 104.6 104.6 175.5 Piston Area-Pull (cm 2 ) 75.2 101.8 101.8 165.4 Weight(kg) 11 11.5 13 17.5 GD 2 (Kg-m 2 ) 0.18 0.18 0.18 0.36 A, mm 105 120 120 150 B, mm 180 192 192 222 C, mm 85 120 120 110 D, mm 128 150 150 175 E, mm 38 38 38 38 F M28P1.5 M28P1.5 M28P1.5 M24P3.0 MALE G (max/min) 32/7 37/12 42/7 105/70 H, mm 5 5 5 5 L, mm 167.5 167.5 190 180 M, mm 21 21 21 6 N, mm 35 35 35 38 P 6-M8 x 75 6-M10 x 75 6-M10 x 85 6-M12 S, mm 25 25 35 35 U, mm 9 9 9 - W, mm 49 49 49 - X, mm 110 110 130 - PT PT1/4 PT1/2 PT1/2 PT 1/4

2R Options Option B The above figure is the case with attached Option B. Option A and C are available for customer specification. Also coolant or three air lines available. Please consult LMC for special applications. 2R Hollow Rotary Actuator Option Dimensions 2R 105/21-25 2R 120/21-25 2R 120/21-35 Overall Length, Option A (mm) 281.5 276.5 304 Overall Length, Option B (mm) 310.5 305.5 333 Overall Length, Option C (mm) 251.5 246.5 274 Special Option E High-Volume Coolant 2R Hollow Rotary Actuator Specifications 2R 120/21-35-10 Max. Speed Min 1 3000 Max. Pressure MPa (kgf/cm 2 ) 4.0 (40.8) Overall Length mm 367 Weight kg 14.5 Moment of Inertia N-m 3 (kgf/m 2 ) 2.35 (0.24) Characteristic Option B with 110L/min. High-volume coolant

Our Comprehensive Workholding Product Line LMC/Matsumoto Workholding: Power Operated Chucks ZA (3-jaw, thru-hole and solid center models) ZJA (2-jaw, thru-hole) H (3-jaw, big bore thru-hole) HHA (3-jaw, solid center) Rotating Cylinders ZKP & RHKP (hydraulic thru-hole) RNKP, RCKP & 2R (hydraulic closed cylinders) AVKP (thru-hole high speed air cylinders) LMC Wheel Chucks/Actuators: workholding for producing passenger car, light truck, heavy truck, and motorcycle wheels Standard size wheels from 12 to 25 Quick change chucks from 15 to 25 Special sizes and fixtures for wheel machining LMC/Matsumoto Rotary Tables: (high precision, zero backlash ) NC Rotary Table: Horizontal/Vertical Type KDH (1-axis, 2 models, 200 to 300mm dia face, economical) MD/MDH (1-axis, 16 models 320 to 1200mm dia face, large thru-hole) NC Rotary Table: Vertical Type MDB (1-axis, 8 models 180 to 500mm dia face, motor mounted on back) MDU (1-axis, 13 models 230 to 1200mm dia face, motor mounted on top, large thru-hole) MDDV (1-axis front and back mirror image table faces, 5 models 230 to 500mm dia face, for vertical use only) NC Rotary Table: Super High Speed MDVi (1-axis, 2 models 210 to 340mm dia face, 150rpm, for vertical use only) MDC/EDC (direct drive up to 180 rpm) 2 Axis NC Rotary Table MDAT (2-axis tilting, 7 models 175 to 630mm dia face) NC Rotary Table for EDM MDE (1- and 2-axis, 6 models 80 to 600mm dia face for submersible or wire-cut EDMing) Neidlein: face drivers, live and ultra-live centers, dead centers Spring loaded or fixed center face drivers Standards and specials available for diameters from 0.1 to 25 Standard and special ultra live and dead centers Atling: steady rests for turning long and/or slender workpieces Patented lever design varies grip force only 7% over gripping range (vs. competitors 37%) Many sizes available for gripping diameters from 0.1 to 40 Specifications are subject to change without notice.

U.S. Factory & Headquarters LMC Workholding (Logansport, Indiana USA): standard workholding, wheel chucks, tooling and other special products. Overseas Factories Matsumoto Machine Company (Kanazawa, Japan): power chucks, rotary tables and other workholding devices. Neidlein Spannzeuge Gmbh (Stuttgart, Germany): face drivers, live and dead centers. Atlings Maskinfabrik AB (Ockelbo, Sweden): steady rests. Logansport Matsumoto Company P.O. Box 7006 1200 West Linden Avenue Logansport, Indiana 46947-7006 Phone 574-735-0225 Fax 574-722-6559 www.logan-mmk.com E-mail: info@logan-mmk.com www.logan-mmk.com 93-4727 2003 Logansport Matsumoto Company Printed in USA