Key Features Energy efficient narrow spaced LED flexible linear light strip for continuous consistant color in linear applications. Ideal for IP66 exterior cove, under-counter/cabinet, lighting accents. Complete with encased silicone jacket for outdoor rated IP66, sold per foot. ll Duratape features 2-circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability. ll Duratape features double sided solder points for maximum conductivity and durability. Pre-assembled to specific lengths with various connector options for project requirements and efficient power configuration. Max continuous length: up to 36 per run (1.5W/ft) up to 22 per run (3.0W/ft) up to 19 per run (3.9W/ft) up to 16 per run (4.4W/ft) Multiple dimming options available. Dimensional Drawings 0.33" O.C. Field cut possible every 4. Caution! Field cutting should only be done before power is connected. 0.48" Spacing LEDs Wattage 0.33 OC LED Spacing 36 LEDs per foot 1.5W/ft / 3.0W/ft / 3.9W/ft / 4.4W/ft Color Temp 2700 K / 3000 K / 3500 K / 4000 K Color Consistency CRI 1-2 weeks Details dvanced LED binning with +/- 2-step Macdam Ellipses +95 CRI End Preps Factory prepped wiring options (See Page 2) Mounting Installation Power Supply Certifications Compliance Warranty Essential White ES Tapelight Flexible linear LED strip for continuous consistent color linear applications. MRI CLIFORNI T24 COMPLINT Includes installation-ready 3M tape adhesive for simplified installation directly to mounting channel or application surface Optional mounting channels and clips, protective lens covers, thermal channels and heat transfer tape for optimal maintainance. Field trimmable every 4 Listed Class 2 output, DC power supply required culus Class 2 Wet Listed E471161 Tested in accordance with LM-79-08 Title 24 commercial installation compliant. MRI Safe, driver to be mounted outside of MRI room RoHS compliant 3 year warranty IP66 Class 2 0.16" Duratape features double-sided solder points for maximum continuity for long lifespan. Design Installation Examples Cove Under Counter Directional Cove Lighting Ordering Guide Under Counter Task Under Under Counter Directional Directional Task Fixture Data Model 3000 K Efficacy* Lm/Wt Lm/Ft Wt/Ft ES 1.5W/ft 60.00* 90 1.5 ES 3.0W/ft 60.00* 180 3.0 ES 3.9W/ft 76.41* 298 3.9 ES 4.4W/ft 81.27* 357 4.4 * Meets Title 24 High efficacy rating. Under Counter Cove Lighting LED Data Model Wattage Viewing ngle Lifespan at 90% drive ES 1.5W/ft 0.04W 120 60,000hrs ES 3.0W/ft 0.08W ES 3.9W/ft 0.10W 60,000hrs 50,000hrs ES 4.4W/ft 0.12W 40,000hrs * LEDs operating at 90% of LED manufacturers maximum current rating. Cove Lighting PRODUCT CODE INTENSITY WTTGE IP RTING COLOR TEMP CRI VOLTGE + END PREP + MOUNTING + POWER SUPPLY Toe Kick DL Duratape Shelf Lighting ES Essential White 15 1.5W/ft O Outdoor IP66 27 2700K HC +95 CRI 24 DC 30 3.0W/ft Toe Kick Shelf 30 Lighting 3000K Toe Kick Shelf Lighting 39 3.9W/ft 35 3500K 44 4.4W/ft 40 4000K 1-2 weeks DLES30O30HC24 QS + 07UX1CBL1 QS * Lead time for quick ship fixtures is 1-2 weeks from processed PO date. Consult factory for quantites of over 1,000ft to confirm lead time. Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 03.12.19 - Page 1 of 7
F F End Preps and Connectors 24 dditional 24 lead dditional wire 24 lead dditional wire lead wire lead wire using the new lead lockable wire using interconnect the new lead lockable wire using interconnect the new lockable interconnect B C C D D 07UX1CBL1 Factory attached single lead wire prep. 24 Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. H 07UX1DDCBL-XX: DDITIONL LED WIRE dditional lead wire purchased per foot and H factory attached to specified run leads. Lead wire can be field cut to desired length. B 07UX1CBL2 Factory attached double ended lead wire prep. 24 lead wire at both ends. One end can be used for power connectivity while the other end can be used for interconnection to run to an additional length of Duratape. Caution: Pay attention to max run lengths and voltage drops from total lead/fold wire lengths. C 07UX1FOLDCBL-XX Wire fold (specified length). Wire folds are factory attached to Duratape to meet your specified installation requirements. Wire fold lengths available are 1, 2, 3, 4, 6, 12. dd length number to end of part number. Caution: Pay attention to max run lengths and Gvoltage drops from total lead/fold wire lengths. G D 07UX1DDCON dditional connectors. Lead wire connectors 2/ea per connection. H 07UX1DDCBL-XX: DDITIONL LED WIRE 12 dditional lead wire purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length. Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 03.12.19 - Page 2 of 7
Mounting ccessories DL-EC-66 Optional silicone end cap for termination of IP66 tape, sold individually. DL-CLP-66 DuraTape ES plastic mounting clip, package of 10 each. Recommended quantities per use: Straight flat run aiming upward 12" O.C. (1/ft); Curved aiming upward or wall mounted straight 6" O.C. (2/ft); Wall mounted curved or ceiling mounted 3" O.C. (4/ft). Profiles DL-LUM-U-8 Low profi le aluminum U-Channel for linear run lengths. vailable in 8ft lengths. 1/2 ID, 5/8 OD, 1/4 H DL-LUM-L-6 luminum L-Channel 1/2 x 1/2 for linear run lengths. Duratape can be mounted at either 0º or 90º mounting positions. vailable in 6 lengths. DL-O-MCHN-4 Linear Mounting channel. vailable in 4 lengths. DL-W-2PC-C (Clear) DL-W-2PC-F10/F30/F60 (Frosted) Two-piece mounting tube; base (clear) with cover (frosted) for linear applications. Frosted diffusion levels,, 30% or 60%. vailable in 4 lengths. DL-W-45-MCH-4 (Base, REQUIRED) 45 mounting base for 45 mounted linear applications. vailable in 4 lengths. DL-W-45-CVR-4-C (Clear) DL-W-45-CVR-4-F10/F30/F60 (Frosted) 45 mounting base cover. vailable in 4 lengths. 0.66 0.20 0.73 0.20 0.375 0.66 0.62 0.81 0.87 Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 03.12.19 - Page 3 of 7
Profiles 1.12 0.84 0.51 0.50 0.40 0.88 0.76 0.81 0.81 1.00 PRP66 Surface mount aluminum channel. nodized aluminum rigid profi le complete with opal translucent diffuser cover. vailable in 6 lengths. KTPRP66 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRIN66 Flush mount aluminum channel. nodized aluminum rigid profi le complete with opal translucent diffuser cover. vailable in 6 lengths. KTPRIN66 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRN66 45º aluminum channel. nodized aluminum rigid profi le complete with opal translucent diffuser cover. vailable in 6 lengths. KTPRN66 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRINTCG Surface mounted walk over rated continuous illumination aluminum channel. Includes frosted polycarbonate cover for shadowless light distribution. Complete with track for easy strip insertion. vailable in 1M lengths. KTPRINTCG Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length 0.60 1.00 2.52 DLLUMC6 Surface mounted two-piece continuous illumination channel. 1/2 H x 5/8 W aluminum U-channel with 6 OC screw holes. Snap in full diffusion lens for shadowless light distribution. Sold in 6 lengths. PRINCG Flush Mount aluminum profi le for installation in plasterboard. Complete with white lens. vailable in 6 lengths. Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 03.12.19 - Page 4 of 7
1.37 2.15 1.42 0.65 Profile ccessories - (FOR USE WITH PRP66 PROFILE ONLY) 1.75 1.16 DJUSTBLE STRIP SUPPORT set of two adjustable supports for aluminum profiles. llows the profile to be adjusted up to 90º. 90 Used to position a profile at a distance from the wall/ceiling. 1.18 DL-OR-DEVKT68 Pair of stainless steel fixing brackets for profiles for aluminum profiles. Only to be used with PRP66. DL-PRDJ-SPIKE Single ground stake, mounts to bottom foot of adjustable bracket. For use in planter area, 4¼ long. To be completed with DLORDEVKT68. Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 03.12.19 - Page 5 of 7
Power Supply (REQUIRED) Type Wattage Input/Output Voltage Dimmable IP Rating Output Dimensions DMLV40124D MGNETIC LOW VOLTGE TRNSFORMER 40W 120V / NEM3R UL CLSS 2 8.13 x 3.93 x 1.59 1 DMLV60124D MGNETIC LOW VOLTGE TRNSFORMER 60W 120V / NEM3R UL CLSS 2 8.13 x 3.93 x 1.59 1 DMLV96124D MGNETIC LOW VOLTGE TRNSFORMER 96W 120V / NEM3R UL CLSS 2 8.13 x 3.93 x 1.59 1 DMLV192224D MGNETIC LOW VOLTGE TRNSFORMER 192W 120V / NEM3R UL CLSS 2 8.00 x 4.15 x 3.41 1 DELV40124D ELECTRONIC LOW VOLTGE TRNSFORMER 40W PHSE (120V ONLY) /0-10V DIMMING IP66 / NEM4 UL CLSS 2 11 x 4 x 2.21 1 DELV60124D ELECTRONIC LOW VOLTGE TRNSFORMER 60W PHSE (120V ONLY) /0-10V DIMMING IP66 / NEM4 UL CLSS 2 11 x 4 x 2.21 1 DELV96124D ELECTRONIC LOW VOLTGE TRNSFORMER 96W PHSE (120V ONLY) /0-10V DIMMING IP67 / NEM4 UL CLSS 2 11 x 4 x 2.21 1 DEL60PWM ELECTRONIC PWM DRIVER STNDLONE, UL LISTED PROVIDED BY OTHERS 60W IP67 UR CLSS 2 5.9 X 2.09 X 1.38 DEL90PWM ELECTRONIC PWM DRIVER STNDLONE, UL LISTED PROVIDED BY OTHERS 90W IP67 UR CLSS 2 6.73 X 2.48 X 1.48 DELX601241CPWM ELECTRONIC PWM DRIVER 60W IP67 / NEM3R UL CLSS 2 10 x 10 x 4 1 DELX901241CPWM ELECTRONIC PWM DRIVER 90W IP67 / NEM3R UL CLSS 2 10 x 10 x 4 1 DELX1802242CPWM ELECTRONIC PWM DRIVER 2X90W IP67 / NEM3R UL CLSS 2 12 x 12 x 4 1 DELX2703243CPWM ELECTRONIC PWM DRIVER 3X90W IP67 / NEM3R UL CLSS 2 12 x 12 x 4 1 PS060 1 LUTRON HI-LUME PREMIER 0.1% CONSTNT VOLTGE DRIVER WITH UL LISTED 1 Dimensions include enclosure with mounting bracket. * Constant voltage drivers 50/60HZ, voltage regulated with short circuit protection. Operating temperature -40 C- 80 C * Installation of power supply must be compliant to Class 2 installation standards. Refer to NEC and local building code requirements. * Consult factory for additional driver options (ie: DMX, DLI, wattage, size, shape, Lutron, ELDO, or others). 96W UNIVERSL 120-277 VC HI-LUM DIMMBLE 0.1% IP20/NOM CERTIFIED UL CLSS 2 10.5 x 5.5 x 2 Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 03.12.19 - Page 6 of 7
TPE MXIMUM LENGTH IN FEET PER DRIVER Fixture Wattage 1.5W 2.8W 3.0W 3.5W 3.9W 4.2W 4.4W 8.8W 40W 21FT 11FT 10FT 9FT 8FT 7FT 7FT 3FT Driver Wattage 60W 32FT 17FT 16FT 13FT 12FT 11FT 10FT 5FT 96W 51FT 27FT 25FT 21FT 19FT 17FT 17FT 8FT 90W 48FT 25FT 24FT 20FT 18FT 18FT 16FT 8FT 2X90W (2) 48FT (2) 25FT (2) 24FT (2) 20FT (2) 18FT (2) 18FT (2) 16FT (2) 8FT 3X90W (3) 48FT (3) 25FT (3) 24FT (3) 20FT (3) 18FT (3) 18FT (3) 16FT (3) 8FT 100W 53FT 28FT 26FT 22FT 20FT 19FT 18FT 9FT 2X100 (2) 53FT (2) 28FT (2) 26FT (2) 22FT (2) 20FT (2) 19FT (2) 18FT (2) 9FT Targetti US - Targetti Group Company - 750- W. 17 th St. Costa Mesa, C 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 03.12.19 - Page 7 of 7