Crimping and cutting tools FHP 2 PHD 1. Hydraulic drive units. Foot pump 700 bar

Similar documents
HYDRAULIC JACKS & TOOLS

Universal tools. Hand-operated hydraulic universal tool, hydraulic universal head 472. Battery powered universal tools 475. Bus bar tool centre 479

GENERATION SAFETY PLUS. Battery-operated crimping, cutting and universal tools

HYDAC nitrogen charging units facilitate fast and cost effective filling or topping up of the required gas pre charge pressure in bladder, diaphragm

HYDRAULIC JACKS & TOOLS

Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches

Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2

Proximity switches and switch brackets

Cooling Systems FLKS - 3S/1.0/W... FLKS - 3L/1.0/W DESCRIPTION

HYDRAULIC CRIMPING TOOLS

Air Hoists. Lifting Equipment Ltd

HYDRAULIC POWER UNITS PO 4

Cutting & Crimping Tools

HYDRAULIC JACKS & TOOLS

RED ROOSTER AIR CHAIN HOISTS ARE MANUFACTURED BY TOKU.

INSTRUCTIONS & MAINTENANCE SHEET PORTABLE BATTERY HYDRAULIC POWERPACK HAB1102

HYDRAULIC PUMPS. Performance under Pressure

TH205 TH205 PNEUMATIC ACCESSORIES. Accessories: TH205-1

TOOLS FOR PROFESSIONALS ELECTROTECHNICAL PRODUCTS.

Electric chain hoist PLANETA-GCH. Simple Reliable Safe. Geared limit switch. Lifting heights up to 220 m Accuracy for repetition assured.

TELESCOPIC LOADING SPOUTS

Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT

AEROMAT. Dimensions, single-row design, machine attached to rear wall. Connection values. Dimensions and connection values. electrically-heated

Pilot-Operated Directional Control Valves Series D3 - D11

TZIM. Electropneumatic Analog Positioner 10/ EN

the PROFI-Line II Portable compressors for toughest operations l/min 225 / 330 bar Alu-Frame

Exhaust Extraction Systems for Stationary Vehicles

3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.

Jacks & Lifting Equipment

Installation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0

EBARA PRESSURE BOOSTER UNIT UD Type

Professional full-automatic tire changer TC680 Features

ELECTRO HYDRAULIC THRUSTERS

Test Stand For Air Turbine Starters >TATS4<

Hydraulic Jacks & Tools Valves

Year of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number X mm / Y mm / Z mm C - +/- 220 / B - +/- 110

Industrial Equipment HYDRAULIC TOOLS

SXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations

Mobile Column Lift EHB 707 Standard

Accepts BEKU type dies Up to 150 mm 2 Cu lug. The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.

VFT The most advanced PE-Butt-Welding-Crawler. Your global partner for pipeline equipment!

ZU4-Series, Portable Electric Pumps

P O W E R P U M P S SECTION INDEX. Proper Size & Selection G1 Series Electric...

Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage

Hydraulic Clamping Systems

System 6000 Electropneumatic Converter for Direct Current Signals i/p Converter Type 6126

Cable thermocouple Model TC40

FNA 045 Operating pressure up to 7 bar / 101 psi Nominal flow rate up to 45 l/min / 12 gpm

I 16A 2-pole up to 50 V I I 16A 3-pole up to 50 V I

UM 045 UMPC 045 Oil service - simple, quick and compact with integrated particle monitor

Product Catalog TTB Tauchertechnik Brandenburg GmbH

SXPJ SERIES S X azz.com/rigalite

water-cooled motor / generator with up to 13 kw continuous power

GENERATING SETS & WATER PUMPS

Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW

T-1001 TYPE 1001 I/P & E/P TRANSDUCERS

Pneumatic Actuators. TGA Specifications

LVE - with integrated pneumatic cylinder

Directional Control Valve Series D1VW

Mobile Filter Unit MFU-15

BULK SOLIDS FEEDING. Distributor of. Rotary Valve RV RVR RVR

ZU4-Series, Portable Electric Pumps

Zero Point Clamping System classic 3

Dry Ice Blasting Unit

ZE-Series Electric Pumps

Compact hydraulic power unit Type BKA

Field IT Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters Standard Model with Booster Stage

Battery-powered hydraulic punch driver with 360 rotating head

1/122 Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,

5/2 and 5/3 Way Valves

LMP screw pumps for delivery pressures up to 120 bar

FNA 008 FNA 016 Operating pressure up to 4 bar / 58 psi Nominal flow rate up to 16 l/min / 4.2 gpm

Fume Extraction. 150 Fume Extraction

CMB-SP 3-28 I-C-A-C-A-A

Mobile endless winch up to 300 kg! New! Hoisting Equipment Endless winches. Endless winch, mobile model YaleMtrac. Capacity kg.

AS-I

Chapter 2: Directional Control Valves

Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,

JUMO thermocor. Portable measuring system for AMS2750 and CQI-9. Brief description. Block diagram. Special features. JUMO thermocor.

TROLLEYS & HAND TRUCKS

Cable resistance thermometer Model TR40

Cable resistance thermometer Model TR40

Pneumatic Cylinder. 3I Double-acting type. 3Q Single-acting type (spring returned type)

Portable Lamps Series HS6145, HSL145

Conectores Rectangulares

MONOBLOCK DIRECTIONAL CONTROL VALVES

FA 016 FAPC 016. Oil Service Units. Description. Page 53

ARI-STEVI 440 / 441 DVGW type approval

F.P.T. HYDRAULIC PUMPS AND SYNCHRONOUS LIFTING SYSTEM

7118 Series Halogen Deck Floodlights

Type Type 1001 Transducers. I/P & E/P Transducers

Solenoid valve VDHT standard BSP (British Standard Pipe)

Battery powered crimping tool

Machine elements. Pneumatic stamping unit. Toggle-lever presses

3/2-way Solenoid Valve for pneumatics

LS / LX. Performance under Pressure HYDRAULIC TORQUE WRENCHES

EB EN. Type 3372 Electropneumatic Actuator. Translation of original instructions

C110-9 C Portable Air Compressors. Intelligent Air Technology

AUTOMOTIVE. Performance under Pressure

EX-RECESSED CEILING LIGHT FITTINGS

Transcription:

FHP 2 Foot pump 700 bar Two stage hydraulics Manual retraction in case of need, even at high pressure Sturdy design Automatic pressure switch off High-pressure hose, 2 m 12.0 kg Foot pump 700 bar FHP2 Accessories Page High-pressure hose, 2m HS22 375 High-pressure hose, 3m HS23 375 High-pressure hose, 4m HS24 375 High-pressure hose, 5m HS25 375 High-pressure hose, 6m HS26 375 High-pressure hose, 8m HS28 375 High-pressure hose, 10m HS210 375 Digital meter for force and pressure measurement TC1S 425 Pressure sensor 1000 bar TP1000 425 PHD 1 Pneumatic hydraulic booster For use in explosion-proof areas Manual retraction in case of need even at high pressure High-pressure hose, 2 m Required air pressure: max. 6 bar max. 630 bar 6.3 kg Pneumatic hydraulic booster PHD1 409

Available either with 3-phase motor or with AC motor EHP 2 Electro hydraulic drive units, 700 bar Compact design, lightweight Available either with 3-phase motor or with AC motor High-pressure hose, 2 m Mains cord, 10 m Three-stage safety foot switch Electronic control 70% switch on time EHP 2/380 EHP 2/220 Version: 3-phase motor AC motor Rated output: 0.75 kw 0.75 kw Motor voltage: 360 V - 440 V / 50 Hz 230 V / 50 Hz Capacity: 0.82 l/min 0.9 l/min 22.9 kg 27.9 kg Operating mode: 70% POT 70% POT Hydraulic drive unit 400 V mains voltage Hydraulic drive unit 230 V mains voltage EHP2380 EHP2220 Accessories Page Transport trolley TW50 377 Foot switch FTA1 378 Two hand safety control system ZST3 378 High-pressure hose, 2m HS22 375 High-pressure hose, 3m HS23 375 High-pressure hose, 4m HS24 375 High-pressure hose, 5m HS25 375 High-pressure hose, 6m HS26 375 High-pressure hose, 8m HS28 375 High-pressure hose, 10m HS210 375 Digital meter for force and pressure measurement TC1S 425 Pressure sensor 1000 bar TP1000 425 410

3-phase version EHP 3 Hydraulic drive unit Continuous operation High capacity Compact design 3-phase version High-pressure hose, 2 m Mains cord, 10 m Three-stage safety foot switch Electronic control Version: Rated output: Motor voltage: Capacity: Operating mode: 3-phase motor 1.1 kw 360 V 440 V / 50 60 Hz 0.9 l/min 40.9 kg 100% ED Hydraulic drive unit EHP3 Scope of supply Page High-pressure hose, 2m HS22 375 Foot switch FTA1 378 Accessories Page Transport trolley TW50 377 Foot switch FTA1 378 Two hand safety control system ZST3 378 High-pressure hose, 2m HS22 375 High-pressure hose, 3m HS23 375 High-pressure hose, 4m HS24 375 High-pressure hose, 5m HS25 375 High-pressure hose, 6m HS26 375 High-pressure hose, 8m HS28 375 High-pressure hose, 10m HS210 375 Digital meter for force and pressure measurement TC1S 425 Pressure sensor 1000 bar TP1000 425 411

Mains connection only for charging batteries EHP 5 Hydraulic drive unit Electro hydraulic drive unit for battery operation For connecting to bus bar tool centre, Greenlee punch cylinder and punching head with adapter CMGSK 70% power-on time Compact design, lightweight Mains connection only for charging batteries Rated voltage battery operation 24 V For hydraulic crimping and cutting tools Optical charge indicator Handy pendant touch control Rated output: 0.37 kw Motor voltage: 24 V DC Capacity: 0.4 / 0.8 l/min Dimensions (L x B x H): 400 x 240 x 380 21.0 kg Max. oil volume: 1.1 l Useable oil volume 0.5 l Capacity: 100 crimps/battery charge (at 150 mm² DIN material, wide crimping) Charging time: 3 h Ambient temperature: -20 C to +40 C Operating mode: 70% POT Hydraulic drive unit EHP5 Scope of supply Page High-pressure hose, 3m Accessories Page Adapter Klauke gland to Greenlee connector CMGSK 412

For the operation of hydraulic cutting, crimping and punching tools Electro hydraulic drive unit Compact design For the operation of hydraulic cutting, crimping and punching tools High-pressure hose, 3 m Handy pendant touch control Rated output: Capacity: Dimensions: Max. oil volume: Ambient temperature: Operating mode: 0.75 kw 0,6 l/min approx. 350 x 190 x 370 mm approx. 26 kg 1 l -20 C to +40 C 70% POT Electro hydraulic drive unit 50052799 Scope of supply Page Touch control High-pressure hose, 3m 50052802 Accessories Page High-pressure hose, 3m 50052802 High-pressure hose, 5m 50052810 High-pressure hose, 10m 50052829 Hydraulic hand pump 767 Light, portable hand pump All-purpose - works in every position Incl. Mounting holes for work bench assembly Dimensions: max. 460 bar approx. 330 x 100 x 100 mm approx. 2.7 kg Hydraulic hand pump 767 50132849 Accessories Page High-pressure hose, 0.9m 50383167 413

Lockable pedal for storage and transport High-pressure hose For use with pump 767 For use with pump 767 Without hydraulic oil High-pressure hose 6.4 mm x 0.9 m 50383167 Scope of supply Page High pressure hose 50063022 Coupler plug 90541693 Dust cover 90541707 Hydraulic foot pump 1725 Foot operation ensures wo-handed operation of round and special shaped punches Lockable pedal for storage and transport All-purpose Dimensions: max. 460 bar approx. 400 x 200 x 150 mm approx. 5.0 kg Hydraulic foot pump 1725 50313533 Accessories Page High-pressure hose 6.4 mm x 3 m 50377299 415 414

High-pressure hose For use with pump 1725 For use with pump 1725 Filled with hydraulic oil High-pressure hose 6.4 mm x 3 m 50377299 Scope of supply Page Hydraulic hose 3.0m 90525159 Coupler plug 90541693 Dust cover 90541707 High-pressure hydraulic hand pump 755 Powerful, portable pump Mounting holes for work bench assembly Works in every position Incl. 9.5 mm quick coupling with dust cap Dimensions: approx. 650 x 180 x 150 mm approx. 8.0 kg High-pressure hydraulic hand pump 755 50156772 Accessories Page High-pressure hose 9.5mm x 1.80 m 50112899 416 415

High-pressure hose For use with pump 755 For use with pump 755 Filled with hydraulic oil High-pressure hose 9.5mm x 1.80 m 50112899 Scope of supply Page Hydraulic hose 90507606 Quick action hose coupling 90508238 Hydraulic oil Specially-developed for GREENLEE hydraulic tools Specially-developed for GREENLEE hydraulic tools Hydraulic oil 3.8 l 90510593 Hydraulic oil Specially-developed for GREENLEE hydraulic tools Specially-developed for GREENLEE hydraulic tools Hydraulic oil 0.95 l 90508068 416