Proportional Control Valves www.humphrey-products.com
ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing a frictionless, flat-spring armature, ProControl achieves excellent flow characteristics and long life in a simple, compact construction. MINIATURE Control up to 24 LPM SMALL Control up to 65 LPM 0 LARGE Control up to 300 LPM Manifold Mount FEATURES AND BENEFITS: Low hysteresis throughout the range Excellent flow control Low power consumption Long, trouble-free life Quiet operation Compact construction Made in the USA RoHS and REACH compliant Manifold Mount 0 TYPICAL APPLICATIONS: Selectable or dynamic control of media flow Control of downstream pressure Vacuum control applications Operation of small bore cylinders 0 Manifold Mount
Half-Sections, Specifications, Drawings & Charts 30 Performance,, 0 10v, 0.025" Orifice (Typical) Core Coil 25 20 25 psi 50 psi 100 psi Armature Nozzle FLOW (LPM) 15 10 5 Pressure OUT Port 2 IN Port) Pressure IN Port 1 OUT Port) 0 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 AMPERAGE (A) Specifications Type of Operation: Function: Media: Direct Acting 2-Way, Normally Closed Air, Vacuum or Inert Gas Ambient Temp. Range: -20º to 200ºF Standard Pressures and Available Orifices: @ 25 PSIG @ 50 PSIG @ 100 PSIG Maximum Flow (TYP): Lubrication:.025 /.040 /.060.025 /.040.025 24 LPM Not required Typical Hysteresis: <15% Filtration: Response Time Capability 40 Micron <10 ms Weight (lbs): 0.15 Wetted Materials: ENP Brass, Stainless Steel, Nickel Plated Steel, FKM Power Consumption (watts): 2.0 Nominal Resistance @72ºF (Ohms): Input Current for Full Flow (ma): Note: Consult factory for minimum pressure requirements and vacuum service. 52 273 192 73 Dimensional Drawings Mounting Hole Pattern.40.25 #6-32 ` 0.25 Manifold Mount Dimensional Drawings O.854 O.093 MAX O.110 MAX CHAMFER.88.73 O.88 O.73.215 O.430 CIRCLE THREADS x.200` MIN.015 x 45 EDGE CHAMFER INTERFACE DIMENSIONS.19 PORT UNF ACROSS FLATS 1.55 PORT UNF.19 R O EF THREAD 1.51 1.69 FLAT TO FLAT DIMENSION: 0 (THRU SCREW) BETWEEN O-RINGS ON CIRCLE DIAMETER SHOWN
Half-Sections, Specifications, Drawings & Charts 70 Performance,, 0~10v, 0.040" Orifice (Typical) 60 50 25 psi 50 psi 100 psi Core Coil Armature FLOW (LPM) 40 30 20 10 Pressure OUT Port 2 IN Port) Nozzle Pressure IN Port 1 OUT Port) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 AMPERAGE (A) Specifications Type of Operation: Function: Media: Direct Acting 2-Way, Normally Closed Air, Vacuum or Inert Gas Ambient Temp. Range: -20º to 200ºF Standard Pressures and Available Orifices: @ 25 PSIG @ 50 PSIG @ 100 PSIG Maximum Flow (TYP): Lubrication:.040 /.060 /.090.040 /.060.040 65 LPM Not required Typical Hysteresis: <15% Filtration: Response Time Capability 40 Micron <10 ms Weight (lbs): 0.4 Wetted Materials: ENP Brass, Stainless Steel, Nickel Plated Steel, FKM Power Consumption (watts): 5.8 Nominal Resistance @72ºF (Ohms): Input Current for Full Flow (ma): Note: Consult factory for minimum pressure requirements and vacuum service. 17 70 588 285 Dimensional Drawings Mounting Hole Pattern.40.25 #6-32 ` 0.25 Manifold Mount Dimensional Drawings O.854.215 O.093 MAX O.110 MAX CHAMFER O.430 CIRCLE.73 O.88 O.73 O THREADS x.200` MIN.015 x 45 EDGE CHAMFER INTERFACE DIMENSIONS.188.85 O PORT THREADS 2.61 0 ACROSS FLATS.76 PORT THREADS.188.88 O THREAD SCREW 2.56.71.89 (THRU SCREW) BETWEEN O-RINGS ON CIRCLE DIAMETER SHOWN FLAT TO FLAT DIMENSION: 0
0 Half-Sections, Specifications, Drawings & Charts Core Coil 350 300 250 Performance, 0, 0 10v, 0.156" Orifice (Typical) 25psi 50psi 100psi Armature Nozzle FLOW (LPM) 200 150 100 50 Pressure OUT Port 2 IN Port) Pressure IN Port 1 OUT Port) 0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 AMPERAGE (A) Specifications Type of Operation: Function: Media: Direct Acting 2-Way, Normally Closed Air, Vacuum or Inert Gas Ambient Temp. Range: -20º to 200ºF Standard Pressures and Available Orifices: @ 25 PSIG @ 50 PSIG @ 100 PSIG Maximum Flow (TYP): Lubrication:.156 /.188 /.250.156 /.188.156 300 LPM Not required Note: Consult factory for minimum pressure requirements and vacuum service. Typical Hysteresis: <15% Response Time Capability <10 ms Weight (lbs): 0.9 Wetted Materials: Aluminum, Stainless Steel, Nickel Plated Steel, FKM Power Consumption (watts): 5.8 Nominal Resistance @72ºF (Ohms): Input Current for Full Flow (ma): 19 70 525 285 Dimensional Drawings Mounting.75 Hole Pattern 1 Manifold Mount Dimensional Drawings RED - 10 VDC WHITE - 20 VDC 1/4 x 28 `.25 RED - 10 VDC WHITE - 20 VDC O.125 MAX O.155 MAX CHAMFER.430 1.51 O O.860 CIRCLE PORT 1/4 NPSF O 1.62 1.82 O O 1 OVER FLATS.36 3.27 PORT 1/4 NPSF 1.51 O 1.82 O 2.84 3/8-24 THREADS.32 3/8-24 THREADS x.375` MIN.025 x 45 EDGE CHAMFER INTERFACE BETWEEN 0-RINGS ON CIRCLE DIAMETER SHOWN THRU CENTER
How to Order ProControl Proportional Valves ELECTRICAL CONNECTION V Wire Leads + PORT TYPE P PM Manifold EP Metric Port VP 10 25 A0 CURRENT 10-192mA 20-73mA ORIFICE SIZE 25-0.025 (100 PSIG max) 40-0.040 (50 PSIG max) 60-0.060 (25 PSIG max) MAXIMUM PRESSURE* 25-25 PSIG 50-50 PSIG A0-100 PSIG Order Example: -VP-10-25-A0 * Corresponding Maximum PSIG Orifice Size 25, 50, A0 0.025 orifice 25, 50 0.040 orifice 25 0.060 orifice How to Order ProControl Proportional Valves ELECTRICAL CONNECTION V Wire Leads + PORT TYPE P PM Manifold EP Metric Port VP 20 60 50 Order Example: -VP-20-60-50 CURRENT ORIFICE SIZE MAXIMUM 10-588mA 40-0.040 (100 PSIG max) PRESSURE* * Corresponding 20-285mA 60-0.060 (50 PSIG max) 25-25 PSIG Maximum PSIG Orifice Size 90-0.090 (25 PSIG max 50-50 PSIG 25, 50, A0 0.040 orifice A0-100 PSIG 25, 50 0.060 orifice 25 0.090 orifice How to Order ProControl 0 Proportional Valves ELECTRICAL CONNECTION V Wire Leads + PORT TYPE P PM Manifold EP Metric Port 0 VPM 20 156 A0 CURRENT 10-525mA 20-285mA ORIFICE SIZE 156-0.156 (100 PSIG max) 188-0.188 (50 PSIG max) 250-0.250 (25 PSIG max MAXIMUM PRESSURE* 25-25 PSIG 50-50 PSIG A0-100 PSIG Order Example: 0-VPM-20-156-A0 * Corresponding Maximum PSIG Orifice Size 25, 50, A0 0.156 orifice 25, 50 0.188 orifice 25 0.250 orifice While the medical, analytical instrumentation and testing/measurement applications have been common, ProControl valves are suitable for most market segments, including ProControl pressure regulators. The flexible valve design can be tailored to meet specific requirements, via Humphrey Engineered Solutions. For more information on Engineered Solutions, please visit www.humphrey-products.com. A privately owned US company since 1901. www.humphrey-products.com Humphrey Products Company P.O. Box 2008 Kalamazoo, MI 49003 USA P.269.381.5500 F.269.381.4113 PCPV-2016 Copyright 2016 Humphrey Products Company, Inc. Printed in U.S.A.