KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Description. Features. Internal Block Diagram.

Similar documents
KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Features. Description. Internal Block Diagram.

KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.

KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.

SA278RXX 2A LDO VOLTAGE REGULATOR. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV: Page 1 of 16 DESCRIPTION

KA317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram.

FIXED VOLTAGE REGULATOR

1.0A Low Dropout Positive Voltage Regulator

3-TERMINAL ADJUSTABLE REGULATOR LM317L

LM , LM mA and 500mA Voltage Regulators

LM ma Low Dropout Regulator

LM , LM mA and 500mA Voltage Regulators

IL1117-xx. 1.0A Low Dropout Positive Voltage Regulator TECHNICAL DATA. Features. Applications. Absolute Maximum Ratings. Rev. 02

AMS1117 1A Adjustable / Fixed Low Dropout Linear Regulator

GM1117 GM1117V1.01. Features. Description. Application. Typical Application Circuits 1A LOW DROPOUT PRECISION VOLTAGE REGULATOR

AT1084 5A Low Dropout Positive Voltage Regulator

DUAL POSITIVE/NEGATIVE, 3 AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS

Features. Low Dropout Voltage Load regulation:0.5% Max current. The AMS1117 is available in six fixed

300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator

LM317L 3-Terminal Adjustable Regulator

Advanced Power Electronics Corp.

TO-220. Symbol Description Max Units VIN Input Voltage 15 V IOUT DC Output Current PD/(VIN-VO) ma. -40 to 125 (* in case of IL

IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA

Ultra Low Dropout Positive Adjustable Linear Regulator Hermetic Package + 3.3Vin at 3.0A

ACE4108 Max.2A Li-ion Switching Charger IC

China - Germany - Korea - Singapore - United States - smc-diodes.com

FXLP34 Single Bit Uni-Directional Translator

Is Now Part of. To learn more about ON Semiconductor, please visit our website at

LM3352 Regulated 200 ma Buck-Boost Switched Capacitor DC/DC Converter

Delphi D12S Non-Isolated Point of Load

Low Power, Low Dropout, 250mA, RF - Linear Regulators

5A LOW DROPOUT POSITIVE REGULATOR

A79L05~A79L24. AiT Semiconductor Inc. ORDERING INFORMATION

4707 DEY ROAD LIVERPOOL, NY PHONE: (315) FAX: (315) M.S. KENNEDY CORPORATION MSK Web Site:

LP2992 Micropower 250 ma Low-Noise Ultra Low-Dropout Regulator in SOT-23 and LLP Packages Designed for Use with Very Low ESR Output Capacitors

S24SP15004 series 60W Single Output DC/DC Converter

TA78DL05S,TA78DL06S,TA78DL08S,TA78DL09S, TA78DL10S,TA78DL12S,TA78DL15S

LP2982 Micropower 50 ma Ultra Low-Dropout Regulator

+3.3Vin to +2.5V Output at 3.0A In Hermetic Packages

R-78AA-0.5 INNOLINE. Features. 0.5 AMP SMD Single Output. Derating-Graph (Ambient Temperature) DC/DC-Converter

OUTPUT VOLTAGE 5V MAX.INPUT CURRENT 16.0A 12V 7.0A 12V 12V 24V 35.0A 28V 48V 12V 15V 24V 28V 23.0A 48V 12V 15V 24V 28V 48V 11.5A

QHW050F1, QHW075F1, and QHW100F1 Power Modules: dc-dc Converters; 36 to 75 Vdc Input, 3.3 Vdc Output; 33 W to 66 W

(typ.) (Range) ±18 330# 89 MPW MPW

Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.

The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.

LP2981 Micropower 100 ma Ultra Low-Dropout Regulator

MCC. SMAJ4728A THRU SMAJ4761A. Features. 1 Watt Zener Diode 3.3 to 75 Volts DO-214AC (SMA)( LEAD FRAME)

UNISONIC TECHNOLOGIES CO., LTD UC5301

SPECIFICATION VOLTAGE REGULATOR PQ200WNA1ZPH

The XA4203 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers

Delphi NC30 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V-5Vout, 30A

Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033

PT8A mA Li-ion/Polymer Battery Charger

XC62FJ Series GENERAL DESCRIPTION APPLICATIONS. FEATURES Maximum Output Current : 200mA TYPICAL PERFORMANCE CHARACTERISTICS

MS52XX SMD Pressure Sensor

S24SP series 40W Single Output DC/DC Converter

Low Dropout Regulator with Delayed Reset

Packaging (1) Package

ST3S01PHD BATTERY CHARGE I.C.

BZX84BxxxLT1G. BZX84CxxxLT1G Series, SZBZX84BxxxLT1G. SZBZX84CxxxLT1G Series. Zener Voltage Regulators. 250 mw SOT 23 Surface Mount

AMS Amp LOW DROPOUT VOLTAGE REGULATOR. General Description. Applications. Typical Application V CONTROL V OUT V POWER +

MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series

Advanced Monolithic Systems

Features. Applications. n Cellular Phone n Palmtop/Laptop Computer n Personal Digital Assistant (PDA) n Camcorder, Personal Stereo, Camera

150 WATT HEW SINGLE SERIES DC/DC CONVERTERS

HM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers

DC/DC Converter URB1D_LMD-10WR3 Series

Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033

NON-ISOLATED DC/DC CONVERTERS

Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %

LV8804FV. Fan Motor Driver. Overview The LV8804FV is a motor driver for PC and server fans. Feature Direct PWM 3-phase sensorless motor driver

IND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules

SPHV-C Series 200W Discrete Bidirectional TVS Diode

VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S

APPLICATIONS: AVAILABLE OPTIONS

LP2981 Micropower 100 ma Ultra Low-Dropout Regulator in SOT-23 and micro SMD Packages

LM3621 Single Cell Lithium-Ion Battery Charger Controller

K3020P/ K3020PG Series

WATT MBH SERIES DC/DC CONVERTERS

Standalone Linear Li-Ion Battery Charger with Thermal Regulation

FDRW40C120J(1200V, 40A)

Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.

BZX84CxxxET1G Series, SZBZX84CxxxET3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount

PIN DESCRIPTION. Enable (Input) IN GND OUT FLG ADJ LM39300T-X.X LM39300-X.X

T - 4 TYP. XØ (2 PLACES) W SQ. PIN (10 PLACES) TERMINAL CODE 1. VN1 2. SNR 3. CN1 4. VNC 5. FNO VP1 RFO AMP

MS868C10. Schottky Barrier Diode. Maximum Rating and Characteristics. FUJI Diode

Fully integrated constant current/constant voltage Li-ion battery charger

MP V, 1A, Li-lon, Linear Battery Charger with 10mA High Voltage LDO

TVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.

BZX84C2V4ET1 Series. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount

3A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed)

DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION

BZX84B4V7LT1, BZX84C2V4LT1 Series. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount

FW250R1 and FW300R1 Power Modules: dc-dc Converters: 36 Vdc to 75 Vdc Input, 28 Vdc Output; 250 W to 300 W

A4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION

Output Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S

NES50-48 : High efficient DC/DC converters

ESAD83M-004RR. Schottky Barrier Diode. Maximum Rating and Characteristics. FUJI Diode

ACE4054C. 500mA/1.5A Standalone Linear Li-Ion Battery Charge

CE3152 Series. Standalone Linear LiFePO4 battery charger with Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS: PIN CONFIGURATION:

FEATURES. Input Voltage (VDC) 3.3

Transcription:

KA7RXXC-Series A Output Low Dropout Voltage Regulators www.fairchildsemi.com Features KA7RXXC-series (//1/9/1) A/.V, V,.1V, 9V, 1V output low dropout voltage regulator TO- full-mold package (pin) Overcurrent protection, thermal shutdown Overvoltage protection, short circuit protection With output disable function KA7RAC Nominal V output without adjusting Output adjustable between 1.V and V A output low dropout voltage regulator TO- full-mold package (pin) Overcurrent protection, thermal shutdown Overvoltage protection, short circuit protection Description The KA7RXXC is a low-dropout voltage regulator suitable for various electronic equipments. It provides constant voltage power source with TO-- lead full mold package. The dropout voltage of KA7RXXC is below.v in full rated current(a). This regulator has various functions such as a peak current protection, a thermal shut down, an overvoltage protection. TO-F-L 1 1.Vin. Vo. GND. Vdis - KA7RXXC(//1/9/1) 1.Vin. Vo. GND. Vadj - KA7RAC Internal Block Diagram Vin 1 Q1 Vo Vin 1 Q1 Vo THERMAL SHUTDOWN OVERVOLTAGE PROTECTION THERMAL SHUTDOWN OVERVOLTAGE PROTECTION BANDGAP REFERENCE - + R1 BANDGAP REFERENCE - + Rin HIGH / LOW OUTPUT SOA PROTECTION SOA PROTECTION Vdis - ON / OFF + Vadj R 1.V SHORTCIRCUIT PROTECTION SHORTCIRCUIT PROTECTION Rref GND GND (KA7R//1/9/1C) (KA7RAC) Rev. 1.. Fairchild Semiconductor Corporation

KA7RXXC-SERIES Absolute Maximum Ratings KA7RXXC, KA7RAC Parameter Symbol Value Unit Remark Input voltage Vin V - Disable voltage KA7RXXC Vdis V - Output current Io. A - Power dissipation 1 Pd1 1. W No heatsink Power dissipation Pd 1 W With heatsink Junction temperature Tj 1 C - Operating temperature Topr - ~ C - Thermal resistance, junction-to case (note) Rθjc.9 C/W - Thermal resistance, junction-to-air (note) Rθja.1 C/W -

KA7RXXC-SERIES Electrical Characteristics (Vin=Note, Io=1.A, Ta= C, unless otherwise specified) Parameter Symbol Conditions Min. Typ. Max. Unit KA7RC Output voltage KA7R1C Vo -.9.1. V KA7R9C -.7 9 9. KA7R1C - 11.7 1 1. Load regulation Rload ma < Io < A -.1. % Line regulation Rline Note -.. % Ripple rejection ratio RR Note1 - db Dropout voltage Vdrop Io = A - -. V Disable voltage high KA7RXXC VdisH Output active. - - V Disable voltage low KA7RXXC VdisL Output disabled - -. V Disable bias current high KA7RXXC IdisH Vdis =.7V - - µa Disable bias current low KA7RXXC IdisL Vdis =.V - - -. ma Quiescent current Iq Io = A - - 1 ma Reference voltage KA7RAC Vref - 1. 1.7 1. V Note: 1.These parameters, although guaranteed, are not 1% tested in production.. Junction -to -case thermal resistance test environments. -. Pneumatic heat sink fixture. -. Clamping pressure psi through 1mm diameter cylinder. -. Thermal grease applied between PKG and heat sink fixture.. KA7RC : Vin = V KA7RC : Vin = 7V KA7R9C : Vin = 11V KA7R1C : Vin = 1V. KA7RC : Vin = to 1V KA7RC, KA7R1C : Vin= to 1V KA7R9C : Vin=1 to V KA7R1C : Vin = 1V to 9V -... KA7RC -..1

KA7RXXC-SERIES Typical Performance Characteristics KA7RC...7.. 1. RL= RL=.Ω.7 1 Input voltage Vin (V) Figure 1. Output Voltage vs. Input Voltage Quiescent current Iq(mA) 1 RL= 1 1 Input voltage Vin(V) Figure. Quiescent Current vs. Input Voltage....7.. 1..7....... 1 1.. Disable voltage Vdis (V). - 7 1 1 Figure. Output Voltage vs. Disable Voltage Figure. Output Voltage vs. Temperature(Tj) Quiescent current Iq(mA) 1 Drop out voltage Vdrop [V].7........A - 7 1 1 Junction temperature Tj( o C). - 7 1 1 Junction Temp Tj [ ] Figure. Quiescent Current vs. Temperature(Tj) Figure. Dropout Voltage vs.junction Temperature

KA7RXXC-SERIES Typical Performance Characteristics (Continued) 1 Power dissipation PD(W) 1 1 Relative output voltage(%) - 7 1 1 1..... Output Current(A). Figure 7. Power Dissipation vs. Temperature(Tj) Figure. Overcurrent Protection Characteristics (Typical Value).7 Output peak current Iop (A)....7. 1 Input-output differential voltage Vin-Vo (V) Figure 9. Output Peak Currenrt vs. Input-Output Differential Voltage

KA7RXXC-SERIES Typical Performance Characteristics(Continued) KA7RC 7 1 RL= RL=.Ω 1 1 Input voltage Vin (V) Quiescent current Iq(mA) 1 1 RL= 1 1 Input voltage Vin(V) Figure 1. Output Voltage vs. Input Voltage Figure. Quiescent Current vs. Input Voltage 7. 1....9.9.9. 1 1.. Disable voltage Vdis (V).9-7 1 1 Figure. Output Voltage vs. Disable Voltage Figure. Output Voltage vs. Temperature(Tj) Quiescent current Iq(mA) Drop out voltage Vdrop [V].7........A - 7 1 1 Junction temperature Tj( o C). - 7 1 1 Junction Temp Tj [ ] Figure. Quiescent Current vs. Temperature(Tj) Figure. Dropout Voltage vs.junction Temperature

KA7RXXC-SERIES Typical Performance Characteristics (Continued) Power dissipation PD(W) 1 1 Relative output voltage(%) - 7 1 1 1..... Output Current(A). Figure 7. Power Dissipation vs. Temperature(Tj) Figure. Overcurrent Protection Characteristics (Typical Value).7 Output peak current Iop (A)....7. 1 Input-output differential voltage Vin-Vo (V) Figure 9. Output Peak Currenrt vs. Input-Output Differential Voltage 7

KA7RXXC-SERIES Typical Performance Characteristics (Continued) KA7R1C 7 1 RL= RL=.Ω 1 1 Input voltage Vin (V) Quiescent current Iq(mA) 1 1 RL= 1 1 Input voltage Vin(V) Figure 1. Output Voltage vs. Input Voltage Figure. Quiescent Current vs. Input Voltage 7.1 1.1.1.1.... 1 1.. Disable voltage Vdis (V). - 7 1 1 Figure. Output Voltage vs. Disable Voltage Figure. Output Voltage vs. Temperature(Tj) 1.7 Quescent current Iq(mA) Drop out voltage Vdrop [V]........A - 7 1 1 Junction temperature Tj( o C). - 7 1 1 Junction Temp Tj [ ] Figure. Quiescent Current vs. Temperature(Tj) Figure. Dropout Voltage vs. Junction Temperature

KA7RXXC-SERIES Typical Performance Characteristics (Continued) 1 Power dissipation PD(W) 1 1 Relative output voltage(%) - 1..... Output Current(A). Figure 7. Power Dissipation vs. Temperature(Tj) Figure. Overcurrent Protection Characteristics (Typical value) Ripple Rejection RR (db) 7 Tj = o C VIN = 7V 1 IO =1A VIN =.Vrms.1 1 1 1 Input Ripple Frequency (KHz) Output Voltage Deviation (mv) Input Voltage (V) 1 1 - -1-1 - - 7 1 Time (µs) Figure 9. Ripple Rejection vs. Input Ripple Frequency Figure 1. Line Transient Response Output Voltage Deviation (V) Output Current (A)... 1. 1... -. -1. -1. -. -.. 1 Time (µs) Output peak current Iop (A).7....7. 1 Input-output differential voltage Vin-Vo (V) Figure 11. Load Transient Response Figure 1. Output Peak Currenrt vs. Input-Output Differential Voltage 9

KA7RXXC-SERIES Typical Performance Characteristics (Continued) KA7R9C 1 1 RL= RL=.Ω 1 1 Input voltage Vin (V) Quiescent current Iq(mA) 1 RL= 1 1 Input voltage Vin(V) Figure 1. Output Voltage vs. Input Voltage Figure. Quiescent Current vs. Input Voltage 1 9.1 9. 9. 9..9.9.. 1 1.. Disable voltage Vdis (V). - 7 1 1 Figure. Output Voltage vs. Disable Voltage Figure. Output Voltage vs. Temperature(Tj) 1.7 Quescent current Iq(mA) Drop out voltage Vdrop [V]........A - 7 1 1 Junction temperature Tj( o C). - 7 1 1 Junction Temp Tj [ ] Figure. Quiescent Current vs. Temperature(Tj) Figure. Dropout Voltage vs.junction Temperature 1

KA7RXXC-SERIES Typical Performance Characteristics (Continued) 1 Power dissipation PD(W) 1 1 Relative output voltage(%) - 7 1 1 1..... Output Current(A). Figure 7. Power Dissipation vs. Temperature(Tj) Figure. Overcurrent Protection Characteristics (Typical Value).7 Output peak current Iop (A)....7. 1 Input-output differential voltage Vin-Vo (V) Figure 9. Output Peak Currenrt vs. Input-Output Differential Voltage 11

KA7RXXC-SERIES Typical Performance Characteristics (Continued) KA7R1C 1. 1. 1. 7... RL= RL= Ω 1 1 Input voltage Vin (V) Figure 1. Output Voltage vs. Input Voltage Quiescent current Iq(mA) 1 1 RL= 1 1 Input voltage Vin(V) Figure. Quiescent Current vs. Input Voltage 1. 1. 1. 7... 1. 1. 1. 11.9 11.9 11.9. 1 1.. Disable voltage Vdis (V) 11.9-7 1 1 Figure. Output Voltage vs. Disable Voltage Figure. Output Voltage vs. Temperature(Tj) 1.7 Quiescent current Iq(mA) Drop out voltage Vdrop [V]........A - 7 1 1 Junction temperature Tj( o C). - 7 1 1 Junction Temp Tj [ ] Figure. Quiescent Current vs. Temperature(Tj) Figure. Dropout Voltage vs.junction Temperature 1

KA7RXXC-SERIES Typical Performance Characteristics (Continued) 1 Power dissipation PD(W) 1 1 Relative output voltage(%) - 7 1 1 Figure 7. Power Dissipation vs. Temperature(Tj) 1..... Output Current(A). Figure. Overcurrent Protection Characteristics (Typical Value).7 Output peak current Iop (A)....7. 1 Input-output differential voltage Vin-Vo (V) Figure 9. Output Peak Currenrt vs. Input-Output Differential Voltage 1

KA7RXXC-SERIES Typical Performance Characteristics (Continued) KA7RAC 7 1 RL= RL=.Ω 1 1 Input voltage Vin (V) Quiescent current Iq(mA) 1 1 RL= 1 1 Input voltage Vin(V) Figure 1. Output Voltage vs. Input Voltage. Figure. Quiescent Current vs. Input Voltage 1....9.9.9 Quiescent current Iq(mA).9-7 1 1-7 1 1 Junction temperature Tj( o C ) Figure. Output Voltage vs. Temperature(Tj) * Fixed Mode (Vo=V) Figure. Quiescent Current vs. Temperature(Tj).7 Drop out voltage Vdrop [V]........A Power dissipation PD(W) 1 1. - 7 1 1 Junction Temp Tj [ ] - 7 1 1 Figure. Dropout Voltage vs.junction Temperature Figure. Power Dissipation vs. Temperature(Tj) 1

KA7RXXC-SERIES Typical Performance Characteristics (Continued) 1.7 Relative output voltage(%) 1..... Output Current(A). Output peak current Iop (A)....7. 1 Input-output differential voltage Vin-Vo (V) Figure 7. Overcurrent Protection Characteristics(Typical value) Figure. Output Peak Currenrt vs. Input-Output Differential Voltage 1

+ + KA7RXXC-SERIES Typical Application KA7R//1/9/1C Vin 1 Vo Vdis GND Disable Signal Figure 1. Application Circuit Ci is required if regulator is located at an appreciable distance from power supply filter. Co improves stability and transient response.(co > 7µF) KA7RA Input 1 Vin Vo KA7RA R Output Ci GND Vadj R Co RL Vo = 1. ( 1 + R1//R R//R ) R1 = 1.kΩ, R =.kω Figure. Application Circuit (Adjustable Mode) Ci is required if regulator is located at an appreciable distance from power supply filter. Co improves stability and transient response.(co > 7µF) 1 Variation(%) 1 - -1 - - 7 1 1 Junction temperature Tj( ) Figure. Internal Resistor(R1,R) Variation vs. Temperature(Tj) Input 1 Vin Vo KA7RA Output = V Ci GND Vadj Co RL Figure. Application Circuit (Fixed Mode) 1

KA7RXXC-SERIES Mechanical Dimensions Package Dimensions in millimeters TO-F-L 17

KA7RXXC-SERIES Mechanical Dimensions (Continued) Package Dimensions in millimeters TO-F-L(Forming) 1

KA7RXXC-SERIES Mechanical Dimensions (Continued) Package Dimensions in millimeters TO-F-L(Short Lead) NOTE 1. THESE DIMENSIONS DO NOT INCLUDE MOLD PROTRUSION.. ( ) IS REFERENCE. [ ] IS ASS'Y OUT QUALITY TITLE PKG OUTLINE D TO-F-L, SHORT LEAD UNIT TOLERANCE SCALE mm N/A : 1 DWG. NO. SPEC NO. 19

KA7RXXC-SERIES Ordering Information Product Number Package Operating Temperature KA7RCTU KA7RCTU KA7R1CTU KA7R9CTU TO-F-L KA7R1CTU KA7RACTU KA7RCYDTU KA7RCYDTU - C to + C KA7R9CYDTU KA7R1CYDTU KA7RACYDTU KA7RCTSTU TO-F-L(Forming) KA7RCTSTU TO-F-L(Short Lead) KA7R1CTSTU DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com /1/.m 1 Stock#DSxxxxxxxx Fairchild Semiconductor Corporation