, Cheshire has been assessed and approved in accordance with the requirements of RISAS/003 for 34 product groups, of which 9 have limitations. The scope of accreditation is applicable only to the products identified in the certificate schedule R0010/0014/C0134 Please also see the appendix of the same number, which details the limitations, if limitations exist. Full details of the Supplier's approval status and an executive summary are available to all registered users at Certificate No: R0010/0014/C0134
, Cheshire M01 - Running Gear Eng Change? Expiry Date A - Wheelsets 0006 - Trailer Wheelsets 13/07/2019 0008 - Powered Wheelsets 13/07/2019 B - Wheelset Components 0520 - Axles 13/07/2019 0521 - Axleboxes * 13/07/2019 0522 - Brake Discs 13/07/2019 0523 - Gearwheels * 13/07/2019 0524 - Monobloc Wheels 13/07/2019 0526 - Suspension Tubes * 13/07/2019 C - Bogie Components 0528 - Bolsters / Spring Planks 13/07/2019 0529 - Cast Bogie Frames 13/07/2019 0530 - Earth & Traction Return Brush gear * 13/07/2019 0531 - Fabricated Bogie Frames 13/07/2019 0532 - Lifeguards 13/07/2019 Certificate No: R0010/0014/C0134 Page 1 of 5
, Cheshire M01 - Running Gear Eng Change? Expiry Date C - Bogie Components 0534 - Swing Links / Torque Links 13/07/2019 D - Suspension Components 0010 - Springs - coil 13/07/2019 0011 - Springs - air 13/07/2019 0012 - Springs - rubber 13/07/2019 0521 - Axleboxes * 13/07/2019 0535 - Anti-roll bars 13/07/2019 0536 - Bogie centre pivot 13/07/2019 0538 - Dampers - hydraulic 13/07/2019 0539 - Side bearers 13/07/2019 Certificate No: R0010/0014/C0134 Page 2 of 5
, Cheshire M02 - Brakes and Pneumatics Eng Change? Expiry Date A - Apply forces to wheels 0022 - Actuators - pneumatic & spring 13/07/2019 0024 - Slack adjustors 13/07/2019 0167 - Callipers 13/07/2019 B - Air - production, storage, treatment 0541 - Valves (not safety) 13/07/2019 C - Brake Control 0542 - Electro pneumatic valves * 13/07/2019 D - Slide and slip control 0202 - Tachometers 13/07/2019 0542 - Electro pneumatic valves * 13/07/2019 Certificate No: R0010/0014/C0134 Page 3 of 5
, Cheshire M05 - T&RS electric traction equipment Eng Change? Expiry Date F - Collection equipment 0530 - Earth & Traction Return Brush gear * 13/07/2019 Certificate No: R0010/0014/C0134 Page 4 of 5
, Cheshire M07 - T&RS Transmission Eng Change? Expiry Date A - Gearboxes (Mechanical transmission) 0523 - Gearwheels * 13/07/2019 0574 - Final Drives 13/07/2019 B - Gearcases (Electrical transmission) 0523 - Gearwheels * 13/07/2019 0526 - Suspension Tubes * 13/07/2019 Certificate No: R0010/0014/C0134 Page 5 of 5
Product Group M01-A-0006 - Trailer Wheelsets M01-A-0008 - Powered Wheelsets M01-B-0520 - Axles M01-B-0522 - Brake Discs M01-B-0523 - Gearwheels * Details Approved for the assembly, overhaul and repair of trailer wheelsets fitted with monobloc wheels on solid axle and/or hollow axle wheelsets, including fitment of axle-mounted bearings. Fitting of wheels and axlemounted brake discs to axles is limited to the heatshrink method only. Press-fitting of wheels and axlemounted brake discs is excluded. The fitting of tyres to wheel centres and the assembly of resilient wheels is excluded. Approved for the assembly, overhaul and repair of power wheelsets fitted with monobloc wheels on solid axle and/or hollow axle wheelsets, including fitment of axle-mounted bearings. Fitting of wheels and axlemounted brake discs to axles is limited to the heatshrink method only. Gearwheel assembly to axles is limited to heat-shrink and shrinking plus bolting to flanged axles. Press-fitting of wheels, gearwheels and axle-mounted brake discs is excluded. The fitting of tyres to wheel centres and the assembly of resilient wheels is excluded. Fitting of wheels and axle-mounted brake discs to axles is limited to the heat-shrink method only. Gearwheel assembly to axles is limited to heat-shrink and shrinking plus bolting to flanged axles. Press-fitting of wheels, gearwheels and axle-mounted brake discs is excluded. Approved for the fitting of axle-mounted brake discs to axles the heat-shrink method only. Press-fitting of axlemounted brake discs is excluded. Approved for the fitting of gearwheels to axles by the heat-shrink method and shrinking plus bolting to flanged axles only. Press-fitting of gearwheels is excluded. Certificate No: R0010/0014/C0134 Appendix
Product Group M01-B-0524 - Monobloc Wheels M01-D-0010 - Springs - coil M07-A-0523 - Gearwheels * M07-B-0523 - Gearwheels * Details Approved for the fitting of wheels to axles by the heatshrink method only. Press-fitting of wheels is excluded. The fitting of tyres to wheel centres and the assembly of resilient wheels is excluded. Subject to reassessment when product is available in process. Approved for the fitting of gearwheels to axles by the heat-shrink method and shrinking plus bolting to flanged axles only. Press-fitting of gearwheels is excluded. Approved for the fitting of gearwheels to axles by the heat-shrink method and shrinking plus bolting to flanged axles only. Press-fitting of gearwheels is excluded. Certificate No: R0010/0014/C0134 Appendix