MINIATURE SWITHES WITH HIGH PREISION (QV) SWITHES 5.9 FEATURES High precision as a result of designing ideal spring by using computer analysis O.P. 4.7±0.4mm Reliable design with shock resistance min. 980 m/s High inrush resistance 60A Wide variety of contact ratings and terminal types UL/-UL, ENE/VDE approved TYPIAL APPLIATION Home appliances Vending machines Amusement and communication equipment opies General industrial machines Standard type contact gap is mm. Please consult us if you need more than mm contact gap. RoHS compliant ONSTRUTION. Silver alloy contact. Gold clad contact ONTAT ARRANGEMENT OM
TERMINALS.87 Quick-connect terminal.87 Quick-connect/solder terminal Bottom OM terminal.50 Quick-connect terminal Bottom OM terminal Side OM terminal Side OM terminal Dimensions.87 Quick-connect terminal Dimensions.55 dia. +0..65 0 dia.. Dimensions.87 Quick-connect/solder terminal 8.05 +0. 0.05 4.5 +0.05 0.07 ±. R. R0.8. OPERATION FORE HART 7th digit of Part Number/ Operation Force, Max. by actuator 4 5 6 7 Pin plunger 0.49N 0.98N.96N.94N.9N Short hinge lever 9N.08N.6N.4N 4.N Hinge lever 0.9N 9N.8N.77N.5N Long hinge lever N 0.9N 9N 0.88N.8N Simulated roller lever 0.9N 9N.8N.77N.5N Short roller lever 9N.08N.6N.4N 4.N Roller lever 0.9N 9N.8N.77N.5N
ORDERING INFORMATION 0.A type Ex. 0 0 0 5 Type of switch : QV switch ontact rating 00: 0. A (Gold clad) : Bottom OM, SPDT : Bottom OM, SPST- : Bottom OM, SPST- 4: Side OM, SPDT 5: Side OM, SPST- 6: Side OM, SPST- s 0: Pin plunger : Short hinge lever : Hinge lever : Long hinge lever 4: Simulated roller lever 5: Short roller lever 6: Roller lever Remarks:. Not every combination is available. Please refer to the table, PRODUT TYPES.. Please refer to the Standard hart regarding Agency Standard A:.87 Quick-connect/solder terminal :.87 Quick-connect terminal Operating force by pin plunger (max.) : 0.49 N 4: 0.98 N 5:.96 N Agency standard : UL/-UL rated, ENE/VDE approved 6A type Ex. 0 6 0 5 Type of switch : QV switch ontact rating 06: 6 A (Silver alloy) : Bottom OM, SPDT : Bottom OM, SPST- : Bottom OM, SPST- 4: Side OM, SPDT 5: Side OM, SPST- 6: Side OM, SPST- s 0: Pin plunger : Short hinge lever : Hinge lever : Long hinge lever 4: Simulated roller lever 5: Short roller lever 6: Roller lever Remarks:. Not every combination is available. Please refer to the table, PRODUT TYPES.. Please refer to the Standard hart regarding Agency Standard A:.87 Quick-connect/solder terminal :.87 Quick-connect terminal Operating force by pin plunger (max.) : 0.49 N Agency standard : UL/-UL rated, ENE/VDE approved A type Ex. 0 4 N Type of switch : QV switch ontact rating : A (Silver alloy) : Bottom OM, SPDT : Bottom OM, SPST- : Bottom OM, SPST- 4: Side OM, SPDT 5: Side OM, SPST- 6: Side OM, SPST- s 0: Pin plunger : Short hinge lever : Hinge lever : Long hinge lever 4: Simulated roller lever 5: Short roller lever 6: Roller lever Remarks:. Not every combination is available. Please refer to the table, PRODUT TYPES.. Please refer to the Standard hart regarding Agency Standard A:.87 Quick-connect/solder terminal :.87 Quick-connect terminal D:.50 Quick-connect terminal Operating force by pin plunger (max.) 4: 0.98 N Agency standard : UL/-UL rated, ENE/ VDE approved ontact N: admium free 6A type Ex. 6 0 5 N Type of switch : QV switch ontact rating 6: 6 A (Silver alloy) : Bottom OM, SPDT : Bottom OM, SPST- : Bottom OM, SPST- 4: Side OM, SPDT 5: Side OM, SPST- 6: Side OM, SPST- s 0: Pin plunger : Short hinge lever : Hinge lever : Long hinge lever 4: Simulated roller lever 5: Short roller lever 6: Roller lever Remarks:. Not every combination is available. Please refer to the table, PRODUT TYPES.. Please refer to the Standard hart regarding Agency Standard A:.87 Quick-connect/solder terminal :.87 Quick-connect terminal D:.50 Quick-connect terminal Operating force by pin plunger (max.) 5:.96 N 6:.94 N 7:.9 N Agency standard : UL/-UL rated, ENE/ VDE approved ontact N: admium free
PRODUT TYPES 0.A type (Gold clad contact).87 Quick-connect terminal ) Bottom OM terminal Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever -) Side OM terminal Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever ontact arrangement ontact arrangement SPDT SPST- SPST- 0.49N 000 000 000 0.98N 0004 0004 0004.96N 0005 0005 0005 9N 00 00 00.08N 004 004 004.6N 005 005 005 0.9N 00 00 00 9N 004 004 004.8N 005 005 005 N 00 00 00 0.9N 004 004 004 9N 005 005 005 0.9N 004 004 004 9N 0044 0044 0044.8N 0045 0045 0045 9N 005 005 005.08N 0054 0054 0054.6N 0055 0055 0055 0.9N 006 006 006 9N 0064 0064 0064.8N 0065 0065 0065 ontact arrangement ontact arrangement SPDT SPST- SPST- 0.49N 0040 0050 0060 0.98N 00404 00504 00604.96N 00405 00505 00605 9N 004 005 006.08N 0044 0054 0064.6N 0045 0055 0065 0.9N 004 005 006 9N 0044 0054 0064.8N 0045 0055 0065 N 004 005 006 0.9N 0044 0054 0064 9N 0045 0055 0065 0.9N 0044 0054 0064 9N 00444 00544 00644.8N 00445 00545 00645 9N 0045 0055 0065.08N 00454 00554 00654.6N 00455 00555 00655 0.9N 0046 0056 0066 9N 00464 00564 00664.8N 00465 00565 00665
6A type (Silver alloy contact).87 Quick-connect terminal ) Bottom OM terminal ontact arrangement Remarks: Also.87 Quick-connect/solder terminal is available. When ordering, change the eighth digit of part number to A. <ex.>.87 Quick-connect terminal.87 Quick-connect/solder terminal 0604 060A4 ontact arrangement SPDT SPST- SPST- Pin plunger 0.49N 060 060 060 Short hinge lever 9N 06 06 06 Hinge lever 0.9N 06 06 06 Long hinge lever N 06 06 06 Simulated roller lever 0.9N 064 064 064 Short roller lever 9N 065 065 065 Roller lever 0.9N 066 066 066 -) Side OM terminal ontact arrangement ontact arrangement SPDT SPST- SPST- Pin plunger 0.49N 0640 0650 0660 Short hinge lever 9N 064 065 066 Hinge lever 0.9N 064 065 066 Long hinge lever N 064 065 066 Simulated roller lever 0.9N 0644 0654 0664 Short roller lever 9N 0645 0655 0665 Roller lever 0.9N 0646 0656 0666 A type (Silver alloy contact).87 Quick-connect terminal ) Bottom OM terminal ontact arrangement ontact arrangement SPDT SPST- SPST- Pin plunger 0.98N 04N 04N 04N Short hinge lever.08n 4N 4N 4N Hinge lever 9N 4N 4N 4N Long hinge lever 0.9N 4N 4N 4N Simulated roller lever 9N 44N 44N 44N Short roller lever.08n 54N 54N 54N Roller lever 9N 64N 64N 64N -) Side OM terminal ontact arrangement ontact arrangement SPDT SPST- SPST- Pin plunger 0.98N 404N 504N 604N Short hinge lever.08n 44N 54N 64N Hinge lever 9N 44N 54N 64N Long hinge lever 0.9N 44N 54N 64N Simulated roller lever 9N 444N 544N 644N Short roller lever.08n 454N 554N 654N Roller lever 9N 464N 564N 664N Remarks:. Also.87 Quick-connect/solder terminal is available. When ordering, change the eighth digit of part number to A. <ex.>.87 Quick-connect terminal.87 Quick-connect/solder terminal 04 0A4..50 Quick-connect terminal is available. When ordering, change the eighth digit of part number to D. <ex.>.87 Quick-connect terminal.50 Quick-connect terminal 04 0D4
6A type (Silver alloy contact).87 Quick-connect terminal ) Bottom OM terminal Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever -) Side OM terminal Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever ontact arrangement Remarks:..87 Quick-connect/solder terminal is available. When ordering, change the eighth digit of part number to A. <ex.>.87 Quick-connect terminal.87 Quick-connect/solder terminal 605 60A5..50 Quick-connect terminal is available. When ordering, change the eighth digit of part number to D. <ex.>.87 Quick-connect terminal.50 Quick-connect terminal 605 60D5 ontact arrangement SPDT SPST- SPST-.96N 605N 605N 605N.94N 606N 606N 606N.9N 607N 607N 607N.6N 65N 65N 65N.4N 66N 66N 66N 4.N 67N 67N 67N.8N 65N 65N 65N.77N 66N 66N 66N.5N 67N 67N 67N 9N 65N 65N 65N 0.88N 66N 66N 66N.8N 67N 67N 67N.8N 645N 645N 645N.77N 646N 646N 646N.5N 647N 647N 647N.8N 655N 655N 655N.4N 656N 656N 656N 4.N 657N 657N 657N.8N 665N 665N 665N.77N 666N 666N 666N.5N 667N 667N 667N ontact arrangement ontact arrangement SPDT SPST- SPST-.96N 6405N 6505N 6605N.94N 6406N 6506N 6606N.9N 6407N 6507N 6607N.6N 645N 655N 665N.4N 646N 656N 666N 4.N 647N 657N 667N.8N 645N 655N 665N.77N 646N 656N 666N.5N 647N 657N 667N 9N 645N 655N 665N 0.88N 646N 656N 666N.8N 647N 657N 667N.8N 6445N 6545N 6645N.77N 6446N 6546N 6646N.5N 6447N 6547N 6647N.6N 6455N 6555N 6655N.4N 6456N 6556N 6656N 4.N 6457N 6557N 6657N.8N 6465N 6565N 6665N.77N 6466N 6566N 6666N.5N 6467N 6567N 6667N
DATA Gold-clad type Range of low-level current voltage 500 urrent (ma) 00 50 0 5 4 8 6 0 4 D voltage (V) SPEIFIATIONS. ontact rating Gold clad contact Silver alloy contact Type 0.A type 6A type A type 6A type Gold clad contact for low level circuit Voltage Remark: The inductive load for D should have a time constant of 7 ms or less. Resistive load (cos=) Inductive load (cos nearly equal 0.6 to 0.7) 50V A 0.A 0.A 5V A 0.A 0.A 0V D 0.A 0.A 50V A 6A A 5V A 6A A 5V D A A 50V A A 6A 5V A A 6A 5V D 0.6A 0.6A 50V A 6A 0A 5V A 6A 0A 5V D 0.6A 0.6A 6V D 5mA V D ma 4V D ma. haracteristics Type 6,, 6A type (Silver alloy) 0.A type (Gold clad) Mechanical 0 7 operations (at 60 cpm) Expected life (min.) 0 Electrical 0 5 Operations (at rated load 0 cpm) operations (at rated load) 0 6 operations (at low-level circuit rating) Insulation resistance 00MΩ (at 500V D) Between terminals,000vrms for min. Dielectric strength Between terminals and other exposed metal parts Between terminals and ground,000vrms for min.,000vrms for min. ontact resistance (initial) 50mΩ (by voltage drop at A 6 to 8V D) 50mΩ (by voltage drop at 0.A 6 to 8V D) Vibration resistance (by pin plunger) 0 to 55Hz at simple amplitude of 0.75mm (ontact opening: max. msec.) Shock resistance (by pin plunger) (contact opening: max. msec.) O.F. 0.49N max. type Min. 98m/s O.F. 0.98N max. type Min. 96m/s O.F..96N to.9n max. type Min. 94m/s Allowable operating speed 0. to,000mm/sec. (at pin plunger) Maximum operating cycle rate 600cpm Ambient temperature 5 to +05 (Not freezing below 0 ) Weight 6.g O.F. N to 0.49N max. type Min. 98m/s O.F. 0.98N max. type Min. 96m/s O.F..96N max. type Min. 94m/s
. Operating characteristics Pin plunger 7th digit of part No. 4 5 6 7 Operating force, max. 0.49N 0.98N.96N.94N.9N Release force, min. 0.N N 0.49N 0.74N 0.98N Pretravel, max. mm.4 Movement differential, max. mm 0.4 Overtravel, min. mm.0 Operating position mm 4.7±0.4 Short hinge lever 7th digit of part No. 4 5 6 7 Operating force, max. 9N.08N.6N.4N 4.N Release force, min. 0.098N 0.0N 0.9N 9N 0.78N Pretravel, max. mm.6 Movement differential, max. mm Overtravel, min. mm 0.9 Operating position mm 5.± Hinge lever 7th digit of part No. 4 5 6 7 Operating force, max. 0.9N 9N.8N.77N.5N Release force, min. 0.049N 0.098N 0.0N 0.9N 0.9N Pretravel, max. mm. Movement differential, max. mm.0 Overtravel, min. mm.4 Operating position mm 5.±.0 Long hinge lever 7th digit of part No. 4 5 6 7 Operating force, max. N 0.9N 9N 0.88N.8N Release force, min. 0.05N 0.049N 0.098N N 0.0N Pretravel, max. mm 7.5 Movement differential, max. mm.0 Overtravel, min. mm. Operating position mm 5.±.6 Simulated roller lever 7th digit of part No. 4 5 6 7 Operating force, max. 0.9N 9N.8N.77N.5N Release force, min. 0.049N 0.098N 0.0N 0.9N 0.9N Pretravel, max. mm. Movement differential, max. mm.0 Overtravel, min. mm.4 Operating position mm 8.5±.0 Short roller lever 7th digit of part No. 4 5 6 7 Operating force, max. 9N.08N.6N.4N 4.N Release force, min. 0.098N 0.0N 0.9N 9N 0.78N Pretravel, max. mm.6 Movement differential, max. mm Overtravel, min. mm 0.9 Operating position mm 0.7± Roller lever 7th digit of part No. 4 5 6 7 Operating force, max. 0.9N 9N.8N.77N.5N Release force, min. 0.049N 0.098N 0.0N 0.9N 0.9N Pretravel, max. mm. Movement differential, max. mm.0 Overtravel, min. mm.4 Operating position mm 0.7±.0
DIMENSIONS. Pin plunger Bottom OM terminal AD Data The AD data of the products with a AD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e mm General tolerance: ±.87 Quick-connect terminal.50 Quick-connect terminal.55 dia. +0..65 0 dia. +0.05 0.07.4 max. 4.7 ±0.4 5.9 ±0..8 +. 0.05 0..8.8 ±.4.5 ±0.. 9.45..8 +. 0.05 dia. 4. 9..95.4 max. 4.7 ±0.4 5.9 ±0..8 +. 0.05 0..8.4 ±. ±0. 4.7.8 ±.8 +0. 8.05-0.05 4.5 ± +. 0.05 dia. 4..6 0.8 9. 0.6 9.7.95 Side OM terminal AD Data.87 Quick-connect terminal.50 Quick-connect terminal.55 dia. +0..65 0 dia. +0.05 0.07.4 max. 4.7 ±0.4 5.9 ±0..8 +. 0.05 0..8.4 ±. ±0. 9.45.8..8 +. 0.05 dia. 4. 9. 6.95.4 max. 4.7 ±0.4 5.9 ±0..8 +. 0.05 0..8.4 ±. ±0. 4.7.8.8 +0. 8.05-0.05 4.5 ± +. 0.05 dia. 4..6 0.8 9. 0.6 9.8.95. Short hinge lever AD Data.55 dia...6 max.. ± 0..8.8 +. 0.05 dia. 5.0 5. ± 5.9 ±0..8 +. 0.05.4 ±. ±0..5 4. 9. 9.45 The dimensions other than drawn above are same as pin plunger type.
. Hinge lever AD Data.55 dia. mm General tolerance: ±.. max. 5.8 ± 0..8.8 +. 0.05 dia. 5.0 4. ±.0 5.9 ±0..8 +. 0.05.4 ±. ±0..5 4. 9. 9.45 The dimensions other than drawn above are same as pin plunger type. 4. Long hinge lever AD Data.55 dia.. 7.5 max. 59.5 ± 0..8.8 +. 0.05 dia. 5.0 5. ±.6 5.9 ±0..8 +. 0.05.4 ±. ±0..5 4. 9. 9.45 The dimensions other than drawn above are same as pin plunger type. 5. Simulated roller lever AD Data.55 dia... max. R.8 ± 0..8.8 +. 0.05 dia. 5.0 ±.0 8.5 5.9 ±0..8 +. 0.05.4 ±. ±0..5 4. 9. 9.45 The dimensions other than drawn above are same as pin plunger type.
6. Short roller lever AD Data.55 dia. mm General tolerance: ±..6 max. 0.6 ± 0..8.8 +. 0.05 dia. 4.9 4.8 ± 0.7 5.9 ±0..8 +. 0.05.4 ±. ±0..5 4. 9. 9.45 The dimensions other than drawn above are same as pin plunger type. 7. Hinge Roller lever AD Data.55 dia... max. 4. ± 0..8.8 +. 0.05 dia. 4.9 4.8 ±.0 0.7 5.9 ±0..8 +. 0.05.4 ±. ±0..5 4. 9. 9.45 The dimensions other than drawn above are same as pin plunger type.
TES. Fastening of the switch body ) Use flat filister head M screws to mount switches with less than a 0.49 N m torque. Use of screws washers or adhesive lock is recommended to prevent loosening of the screws. ) heck insulation distance between ground and each terminal. ) When the operation object is in the free position, force should not be applied directly to the actuator or pin plunger. Also force should be applied to the pin plunger from vertical direction to the switch. 4) The standard value of overtravel should be the range of 70% to 00% of the rated O.T. value.. Soldering operations Manual soldering should be accomplished within 5 seconds, with max. 50 iron. are should be taken not to apply force to the terminal during soldering. Terminal portions must not be moved in min. minute after soldering. Also no tensile strength of lead wires should be applied to terminals.. Varience of operating characteristics When specifying the switch, allow +0% to the listed operating and release forces. 4. Environment Avoid using the switches in the following conditions; In corrosive gases, such as silicon gas In a dusty environment 5. For switching of inductive loads (relays, solenoids, etc.) ) In order to prevent damage to contacts due to the occurrence of arcing, an arc absorbing circuit should be applied. ) are should be taken that occurrence in A load possibly shorten the expected life. 6. Please assure the quality and reliability of the switch under the actual service condition. 7. It is recommended to use Gold clad contact type in use of low-level circuit rating. 8. over and body are press-fitted. Once it is taken apart, it may cause change of characteristics. 9. over and body are press-fitted. Once it is taken apart, it may cause change of characteristics. USE OF ONNETOR The.87 Quick-connect terminal and.50 Quick-connect terminal accept the all kinds of polarity connectors and the Positive Lock connectors Please contact the manufacturers directly. receptacle terminal.50 series.87 series Positive Lock connector. (equipped with the lock construction of low insertion type).87 type ( polarity).50 type ( polarity).87 type ( polarities).87 type ( polarities)
<USTOM ORDERED PRODUT> MINIATURE SWITHES WITH HIGH PREISION (ontact gap: more than mm type) (QV) SWITHES ompliance with RoHS Directive onforms with the IE950 standards for secondary circuit insulation distance. Assures a contact gap of at least mm an handle high-capacity loads on the secondary side that S-type size switches cannot High inrush and hard impacts resistant Excellent operating position precision UL/SA/VDE/SEMKO/TÜV approved PRODUT TYPES ontact rating: 0.A, 6A, A, 6A (50V A) Terminal shape:.87 Quick connect terminal,.87 Quick connect/solder terminal For other specifications, please consult us. DIMENSIONS AND TES Please refer to Standard QV switches catalog for dimensions and notes. SPEIFIATIONS ontact ratings (0. to 6 A) Voltage Resistive load Inductive load (cos φ =.0) (cos φ ] 0.6 to 0.7) Type 0.A 6A A 6A 0.A 6A A 6A 50V A 0.A 6A A 6A 0.A A 6A 0A 5V A 0.A 6A A 6A 0.A A 6A 0A 5V D 0.A A 0.6A 0.6A 0.A A 0.6A 0.6A Remark: The inductive load for D should have a time constant of 7 ms or less. 0.A type minimum load: 6V D 5mA (Resistive load) V D ma (Resistive load) 4V D ma (Resistive load) Please consult us for further information.